PVE8-ARM fresh install

pve8arm-fresh.txt

***Pi-Mox8 setup on raspberry pi 4b & cm4


***Raspberry PI OS setup

***Install raspbian x64 lite on raspberry pi

pull the latest copy of Raspberry Pi Imager, from here https://www.raspberrypi.com/software/ and Raspberry PI OS x64 lite based on debian 12 bookworm from here: https://www.raspberrypi.com/software/operating-systems/#raspberry-pi-os-64-bit

open imager, click choose os, scroll to the bottom and select custom. open the image "2024-11-19-raspios-bookworm-arm64-lite.img.xz"
select storage and choose your usb device
click gear icon and add hostname, enable ssh, set username and pw etc.
write to usb/sd card then install in raspberry pi and boot system
once the system is up ssh into your new system


set root pw
`sudo passwd root`

login as root
`sudo su -`

install some tools to make life easier
`apt install -y neofetch tmux chrony ifupdown2`

open tmux session (this is not mandatory if you know you have a good network connection to the target)
`tmux new -s pimoxinstall`

run updates
`apt update && apt upgrade -y`

reboot now

login again as root

***Setup for proxmox8-arm64

Add Key for proxmox-arm8 mirror
`curl https://mirrors.apqa.cn/proxmox/debian/pveport.gpg -o /etc/apt/trusted.gpg.d/pveport.gpg`

create pveport.list file and populate with mirror info
`echo "deb https://global.mirrors.apqa.cn/proxmox/debian/pve bookworm port">/etc/apt/sources.list.d/pveport.list`

`apt update && apt full-upgrade`

add your ip and hostname to the /etc/hosts file
`nano /etc/hosts`
comment out the 127.0.1.1 address if thats in your hosts file

***Install PVE packages

`apt install -y proxmox-ve postfix open-iscsi`
for postfix config I selected "Local only" > then confirmed the same hostname entered earlier

reboot now
login again as root after reboot

verify everything is current no other updates needed
`apt update`

Disable popup about subscription:
open ssh session to your system

`sed -Ezi.bak "s/(Ext.Msg.show\\(\\{\\s+title: gettext\\('No valid sub)/void\\(\\{ \\/\\/\\1/g" /usr/share/javascript/proxmox-widget-toolkit/proxmoxlib.js && systemctl restart pveproxy.service`

increase swap space:
`nano /etc/dphys-swapfile`
increase the swap file space to 1gb or 1024 - "CONF\_SWAPSIZE=1024" - save the file then reboot the system

Fix memory stats for containers:
please modify cmdline.txt like  
`nano /boot/firmware/cmdline.txt`
put the following parameters to the end of the line

`cgroup_enable=cpuset cgroup_enable=memory cgroup_memory=1`

login to web interface

open shell or ssh into system
make sure your timezone is set
timedatectl 

make sure chrony is setup correctly
chronyc sources

config for chrony found @ /etc/chrony/chrony.conf

setup your normal config as per your own spec (add bridge0 users groups roles storage etc)


------
After PVE install

         .://:`              `://:.            
       `hMMMMMMd/          /dMMMMMMh`          ----------------- 
        `sMMMMMMMd:      :mMMMMMMMs`           OS: Proxmox VE 8.3.2+port aarch64 
`-/+oo+/:`.yMMMMMMMh-  -hMMMMMMMy.`:/+oo+/-`   Host: Raspberry Pi Compute Module 4 Rev 1.1 
`:oooooooo/`-hMMMMMMMyyMMMMMMMh-`/oooooooo:`   Kernel: 6.6.62+rpt-rpi-v8 
  `/oooooooo:`:mMMMMMMMMMMMMm:`:oooooooo/`     Uptime: 4 mins 
    ./ooooooo+- +NMMMMMMMMN+ -+ooooooo/.       Packages: 1141 (dpkg) 
      .+ooooooo+-`oNMMMMNo`-+ooooooo+.         Shell: bash 5.2.15 
        -+ooooooo/.`sMMs`./ooooooo+-           Terminal: /dev/pts/1 
          :oooooooo/`..`/oooooooo:             CPU: (4) @ 1.500GHz 
          :oooooooo/`..`/oooooooo:             Memory: 1123MiB / 7809MiB 
        -+ooooooo/.`sMMs`./ooooooo+-
      .+ooooooo+-`oNMMMMNo`-+ooooooo+.                                 
    ./ooooooo+- +NMMMMMMMMN+ -+ooooooo/.                               
  `/oooooooo:`:mMMMMMMMMMMMMm:`:oooooooo/`
`:oooooooo/`-hMMMMMMMyyMMMMMMMh-`/oooooooo:`
`-/+oo+/:`.yMMMMMMMh-  -hMMMMMMMy.`:/+oo+/-`
        `sMMMMMMMm:      :dMMMMMMMs`
       `hMMMMMMd/          /dMMMMMMh`
         `://:`              `://:`

Updated this and made sure it works with the latest raspbian lite on Pi 4b and CM4. Should install PVE 8.3.2 as of Jan 2025

This bit is out of date

Add Key for proxmox-arm8 mirror
`curl https://mirrors.apqa.cn/proxmox/debian/pveport.gpg -o /etc/apt/trusted.gpg.d/pveport.gpg`

create pveport.list file and populate with mirror info
`echo "deb https://global.mirrors.apqa.cn/proxmox/debian/pve bookworm port">/etc/apt/sources.list.d/pveport.list`

The correct values can be found here:
https://github.com/jiangcuo/Proxmox-Port/blob/main/help/repo.md

I get the following message after running the proxmox install command (line 52)

E: Unable to locate package proxmox-ve

I've updated the mirrors using the link provided by @rope-hmg

Any suggestions on how to resolve this?

Looks to me like the person hosting the repo has taken it offline and forced everyone to move over to "pxvirt": https://global.mirrors.apqa.cn/

If you've already run the above script, run the following (safe to do so even if you haven't run the script):

rm -rf /etc/apt/trusted.gpg.d/pveport.gpg
rm -rf /etc/apt/sources.list.d/pveport.list

Then, you can run the above script with the following substitutions:

• Change L39 to:
  curl -L https://mirrors.lierfang.com/pxcloud/lierfang.gpg -o /etc/apt/trusted.gpg.d/lierfang.gpg
• Change L42 to:
  echo "deb [arch=arm64] https://mirrors.lierfang.com/pxcloud/pxvirt bookworm main">/etc/apt/sources.list.d/pxvirt-sources.list
• Change L52 to:
  apt install -y pxvirt postfix open-iscsi

Unfortunately, this also seems to have broken netboot for VMs on the Pi. Adding the RNG device, as suggested in the Proxmox forums, does not work.

Edit:
I've managed to get PXE/ netboot working again by downgrading the following packages:

apt install pve-docs:arm64=8.3.1 pve-edk2-firmware-ovmf:arm64=4.2024.11-3 proxmox-widget-toolkit:arm64=4.3.4 libpve-rs-perl:arm64=0.9.0 corosync:arm64=3.1.7-pve3 pve-qemu-kvm:arm64=9.2.0-2 libpve-cluster-api-perl:arm64=8.0.10 pve-edk2-firmware-legacy:arm64=4.2024.11-3 pve-ha-manager:arm64=4.0.6 pve-edk2-firmware-aarch64:arm64=4.2024.11-3 libpve-storage-perl:arm64=8.3.3 libpve-guest-common-perl:arm64=5.1.6 libvotequorum8:arm64=3.1.7-pve3 libquorum5:arm64=3.1.7-pve3 pve-cluster:arm64=8.0.10 libproxmox-rs-perl:arm64=0.3.4 proxmox-ve:arm64=8.3.0 novnc-pve:arm64=1.4.0-4 libcmap4:arm64=3.1.7-pve3 libcfg7:arm64=3.1.7-pve3 pve-xtermjs:arm64=5.3.0-3 qemu-server:arm64=8.3.7 libpve-access-control:arm64=8.2.0 pve-container:arm64=5.2.2+port1 libcpg4:arm64=3.1.7-pve3 pve-i18n:arm64=3.2.4 libpve-network-api-perl:arm64=0.10.0+port libpve-http-server-perl:arm64=5.1.2 pve-manager:arm64=8.3.3 libpve-common-perl:arm64=8.2.9+port1 libpve-network-perl:arm64=0.10.0+port libpve-notify-perl:arm64=8.0.10 pve-firewall:arm64=5.1.0 libcorosync-common4:arm64=3.1.7-pve3 proxmox-kernel-helper:arm64=8.1.0 proxmox-termproxy:arm64=1.0.1 libpve-cluster-perl:arm64=8.0.10