gtxaspec

aag@mips-development-old:/tmp/dhcpcd$ ./configure --os=linux
configure args: --os=linux
Configuring dhcpcd for ... linux
Found git checkout ... Adding debugging CFLAGS
Enabling INET support
Enabling ARP support
Enabling ARPing support
Enabling IPv4LL support
Enabling INET6 support
Enabling DHCPv6 support

gtxaspec

#!/bin/bash

# Get the current logged-in user
USER_NAME=$(whoami)
VERSION=0.21
PACKAGES="apt-transport-https apt-utils bc bison build-essential ca-certificates ccache cpio curl dialog \
file figlet flex gawk gcc git libncurses-dev lzop make mc nano patchelf qemu-user \
qemu-user-binfmt rsync ssh tftpd-hpa toilet toilet-fonts u-boot-tools unzip wget whiptail xterm"

# Ensure the script is not running as root

gtxaspec

Bootlog:

isvp_t30# print
baudrate=115200

gtxaspec

Ver:240106-T23ZN-SINGLE-b860074-MP
led_status_hide: 0.
riscv set sensor:gc2083 1920x1080
tag::i2c_addr:0x37
tag::reg_addr_size:2
tag::reg_value_size:1
This program was compiled on Mar  4 2024 at 15:39:47.
stream on :61 ms
start init isp :63 ms
iq data addr=0x3f18034

gtxaspec

root@OpenWrt:/# dmesg
[    0.000000] Linux version 5.10.221 (builder@buildhost) (mipsel-openwrt-linux-musl-gcc (OpenWrt GCC 11.2.0 r20341-591b7e93d3) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 SMP Mon Jul 15 22:25:54 2024
[    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[    0.000000] printk: bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[    0.000000] MIPS: machine is SERCOMM NA502
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] VPE topology {2} total 2
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes

gtxaspec

DMESG

root@vera:/etc/config# dmesg
[    0.000000] Linux version 6.6.50 (builder@buildhost) (mipsel-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r27352-47370eb9ba) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Fri Sep 13 20:17:35 2024
[    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[    0.000000] printk: bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[    0.000000] MIPS: machine is SERCOMM NA502
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] VPE topology {2} total 2

gtxaspec

U-Boot SPL 2013.07-00014-g7e49a25-dirty (Jul 15 2022 - 19:00:08)
Timer init
CLK stop
PLL init
pll_init:366
pll_cfg.pdiv = 10, pll_cfg.h2div = 5, pll_cfg.h0div = 5, pll_cfg.cdiv = 1, pll_cfg.l2div = 2
nf=92 nr = 1 od0 = 1 od1 = 2
cppcr is 05c05100
CPM_CPAPCR 05c0510d
nf=84 nr = 1 od0 = 1 od1 = 2

gtxaspec

t30 / sc2235

GPIOs 0-31, GPIO A:

GPIOs 32-63, GPIO B:
 gpio-49  (motor_st4_gpio      ) out lo
 gpio-50  (motor_st3_gpio      ) out lo
 gpio-51  (R331-USB            ) out hi
 gpio-52  (reset button        ) in  hi
 gpio-53  (SPK SELECT 1:t30/1:r333) out lo

gtxaspec

GPIOs 0-31, GPIO A:
 gpio-18  (sc2336_reset        ) out hi

GPIOs 32-63, GPIO B:
 gpio-38  (gpioCtrl            ) in  hi
 gpio-39  (spkr            ) out lo
 gpio-45  (irled            ) out lo
 gpio-46  (led-b            ) out lo
 gpio-47  (wifi               ) out lo
 gpio-50  (mmc_detect          ) in  hi

gtxaspec

======
[root@Ingenic-uc1_1:~]# mount -t debugfs none /sys/kernel/debug; cat /sys/kernel
/debug/gpio
GPIOs 0-31, GPIO A:
 gpio-18  (ov2735b_reset       ) out hi

GPIOs 32-63, GPIO B:
 gpio-39  (scl                 ) in  hi
 gpio-40  (peripher            ) out lo
 gpio-47  (jzmac               ) out lo