Last active
          October 30, 2022 14:37 
        
      - 
      
 - 
        
Save gyaresu/d095cefae8a2869cc6ef11567e4a27fb to your computer and use it in GitHub Desktop.  
    rfcat config - GFSK, Manchester encoded
  
        
  
    
      This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
      Learn more about bidirectional Unicode characters
    
  
  
    
  | YardStick One: | |
| In [19]: print(conf) | |
| 00000000 (62) RadioConfig: RadioConfig | |
| 00000000 (01) sync1: 0x000000ee (238) | |
| 00000001 (01) sync0: 0x000000ee (238) | |
| 00000002 (01) pktlen: 0x0000003d (61) | |
| 00000003 (01) pktctrl1: 0x00000001 (1) | |
| 00000004 (01) pktctrl0: 0x00000005 (5) | |
| 00000005 (01) addr: 0x000000db (219) | |
| 00000006 (01) channr: 0x00000000 (0) | |
| 00000007 (01) fsctrl1: 0x0000000c (12) | |
| 00000008 (01) fsctrl0: 0x00000000 (0) | |
| 00000009 (01) freq2: 0x00000012 (18) | |
| 0000000a (01) freq1: 0x0000000a (10) | |
| 0000000b (01) freq0: 0x000000aa (170) | |
| 0000000c (01) mdmcfg4: 0x000000c6 (198) | |
| 0000000d (01) mdmcfg3: 0x00000006 (6) | |
| 0000000e (01) mdmcfg2: 0x0000001a (26) | |
| 0000000f (01) mdmcfg1: 0x00000003 (3) | |
| 00000010 (01) mdmcfg0: 0x00000011 (17) | |
| 00000011 (01) deviatn: 0x00000036 (54) | |
| 00000012 (01) mcsm2: 0x00000007 (7) | |
| 00000013 (01) mcsm1: 0x0000000f (15) | |
| 00000014 (01) mcsm0: 0x00000018 (24) | |
| 00000015 (01) foccfg: 0x00000017 (23) | |
| 00000016 (01) bscfg: 0x0000006c (108) | |
| 00000017 (01) agcctrl2: 0x00000003 (3) | |
| 00000018 (01) agcctrl1: 0x00000040 (64) | |
| 00000019 (01) agcctrl0: 0x00000091 (145) | |
| 0000001a (01) frend1: 0x000000b6 (182) | |
| 0000001b (01) frend0: 0x00000010 (16) | |
| 0000001c (01) fscal3: 0x000000ef (239) | |
| 0000001d (01) fscal2: 0x0000002c (44) | |
| 0000001e (01) fscal1: 0x00000014 (20) | |
| 0000001f (01) fscal0: 0x0000001f (31) | |
| 00000020 (01) z0: 0x00000059 (89) | |
| 00000021 (01) z1: 0x0000003f (63) | |
| 00000022 (01) z2: 0x0000003f (63) | |
| 00000023 (01) test2: 0x00000088 (136) | |
| 00000024 (01) test1: 0x00000031 (49) | |
| 00000025 (01) test0: 0x00000009 (9) | |
| 00000026 (01) z3: 0x00000000 (0) | |
| 00000027 (01) pa_table7: 0x00000000 (0) | |
| 00000028 (01) pa_table6: 0x00000000 (0) | |
| 00000029 (01) pa_table5: 0x00000000 (0) | |
| 0000002a (01) pa_table4: 0x00000000 (0) | |
| 0000002b (01) pa_table3: 0x00000000 (0) | |
| 0000002c (01) pa_table2: 0x00000000 (0) | |
| 0000002d (01) pa_table1: 0x00000000 (0) | |
| 0000002e (01) pa_table0: 0x00000012 (18) | |
| 0000002f (01) iocfg2: 0x00000000 (0) | |
| 00000030 (01) iocfg1: 0x00000000 (0) | |
| 00000031 (01) iocfg0: 0x00000000 (0) | |
| 00000032 (01) z4: 0x00000000 (0) | |
| 00000033 (01) z5: 0x00000000 (0) | |
| 00000034 (01) z6: 0x00000000 (0) | |
| 00000035 (01) z7: 0x00000000 (0) | |
| 00000036 (01) partnum: 0x00000011 (17) | |
| 00000037 (01) chipid: 0x00000003 (3) | |
| 00000038 (01) freqest: 0x000000f8 (248) | |
| 00000039 (01) lqi: 0x00000000 (0) | |
| 0000003a (01) rssi: 0x000000c9 (201) | |
| 0000003b (01) marcstate: 0x0000000d (13) | |
| 0000003c (01) pkstatus: 0x00000030 (48) | |
| 0000003d (01) vco_vc_dac: 0x000000fd (253) | |
| Arduino + cc1101 | |
| CC1101_PARTNUM0 | |
| CC1101_VERSION - 0x14 | |
| CC1101_MARCSTATE - 0x1 | |
| IOCFG2: GDO2 Output Pin Configuration - 0x2E | |
| IOCFG1: GDO1 Output Pin Configuration - 0x2E | |
| IOCFG0: GDO0 Output Pin Configuration - 0x6 | |
| FIFOTHR - RX FIFO and TX FIFO Thresholds - 0x47 | |
| SYNC1: Sync Word High Byte - 0xEE | |
| SYNC0: Sync Word Low Byte - 0xEE | |
| PKTLEN: Fixed = Packet Length; Variable = Maximum allowed. — 0x3D | |
| PKTCTRL1: PQT / RSSI, LQI / Address Check / CRC OK - 0x1 | |
| PKTCTRL0: Data whitening / Packet format / CRC Check / Packet length - 0x5 | |
| ADDR - Device Address: 0xBD | |
| FSCTRL1: 0x6 | |
| FSCTRL0: 0x0 | |
| FREQ2: 0x10 | |
| FREQ1: 0xA7 | |
| FREQ0: 0x62 | |
| MDMCFG4: Channel BW - 0xC6 | |
| MDMCFG3: Data Rate (Baud) - 0xE7 | |
| MDMCFG2: Modulation / Manchester / Sync Mode - 0x1A | |
| MDMCFG1: FEC / Num Preamble / Channel Spacing - 0x2 | |
| MDMCFG0: Mantissa of channel spacing - 0x11 | |
| Deviation - 0x36 | |
| FREND1: Front end RX configuration - 0xB6 | |
| FREND0: Front end TX configuration - 0x11 | |
| device initialized | 
  
    Sign up for free
    to join this conversation on GitHub.
    Already have an account?
    Sign in to comment