some ALTERA DE2 FPGA files for Quartus II

DE2_pin_assignments.csv

DE2_TOP.v

// ============================================================================
// Copyright (c) 2012 by Terasic Technologies Inc.
// ============================================================================

// Permission:

//  Terasic grants permission to use and modify this code for use
//  in synthesis for all Terasic Development Boards and Altera Development 
//  Kits made by Terasic.  Other use of this code, including the selling 
//  ,duplication, or modification of any portion is strictly prohibited.

// Disclaimer:

//  This VHDL/Verilog or C/C++ source code is intended as a design reference
//  which illustrates how these types of functions can be implemented.
//  It is the user's responsibility to verify their design for
//  consistency and functionality through the use of formal
//  verification methods.  Terasic provides no warranty regarding the use 
//  or functionality of this code.

// ============================================================================

//  Terasic Technologies Inc
//  9F., No.176, Sec.2, Gongdao 5th Rd, East Dist, Hsinchu City, 30070. Taiwan



//                  web: http://www.terasic.com/
//                  email: [email protected]

// ============================================================================

// Major Functions: DE2 TOP LEVEL

// ============================================================================

// Revision History :
// ============================================================================
//  Ver     :| Author               :| Mod. Date    :| Changes Made:
//  V1.0    :| Johnny   Chen        :| 05/08/19     :|  Initial Revision
//  V1.1    :| Johnny   Chen        :| 05/11/16     :|  Added FLASH Address FL_ADDR[21:20]
//  V1.2    :| Johnny   Chen        :| 05/11/16     :|  Fixed ISP1362 INT/DREQ Pin Direction.
//  V1.3    :| Johnny   Chen        :| 06/11/16     :|  Added the Dedicated TV Decoder Line-Locked-Clock Input
//                                                      for DE2 v2.X PCB.
//  V1.5    :| Eko      Yan         :| 12/01/30     :|  Update to version 11.1 sp1.
// ============================================================================

module DE2_TOP
    (
        ////////////////////    Clock Input     ////////////////////     
        CLOCK_27,                       //  27 MHz
        CLOCK_50,                       //  50 MHz
        EXT_CLOCK,                      //  External Clock
        ////////////////////    Push Button     ////////////////////
        KEY,                            //  Pushbutton[3:0]
        ////////////////////    DPDT Switch     ////////////////////
        SW,                             //  Toggle Switch[17:0]
        ////////////////////    7-SEG Dispaly   ////////////////////
        HEX0,                           //  Seven Segment Digit 0
        HEX1,                           //  Seven Segment Digit 1
        HEX2,                           //  Seven Segment Digit 2
        HEX3,                           //  Seven Segment Digit 3
        HEX4,                           //  Seven Segment Digit 4
        HEX5,                           //  Seven Segment Digit 5
        HEX6,                           //  Seven Segment Digit 6
        HEX7,                           //  Seven Segment Digit 7
        ////////////////////////    LED     ////////////////////////
        LEDG,                           //  LED Green[8:0]
        LEDR,                           //  LED Red[17:0]
        ////////////////////////    UART    ////////////////////////
        UART_TXD,                       //  UART Transmitter
        UART_RXD,                       //  UART Receiver
        ////////////////////////    IRDA    ////////////////////////
        IRDA_TXD,                       //  IRDA Transmitter
        IRDA_RXD,                       //  IRDA Receiver
        /////////////////////   SDRAM Interface     ////////////////
        DRAM_DQ,                        //  SDRAM Data bus 16 Bits
        DRAM_ADDR,                      //  SDRAM Address bus 12 Bits
        DRAM_LDQM,                      //  SDRAM Low-byte Data Mask 
        DRAM_UDQM,                      //  SDRAM High-byte Data Mask
        DRAM_WE_N,                      //  SDRAM Write Enable
        DRAM_CAS_N,                     //  SDRAM Column Address Strobe
        DRAM_RAS_N,                     //  SDRAM Row Address Strobe
        DRAM_CS_N,                      //  SDRAM Chip Select
        DRAM_BA_0,                      //  SDRAM Bank Address 0
        DRAM_BA_1,                      //  SDRAM Bank Address 0
        DRAM_CLK,                       //  SDRAM Clock
        DRAM_CKE,                       //  SDRAM Clock Enable
        ////////////////////    Flash Interface     ////////////////
        FL_DQ,                          //  FLASH Data bus 8 Bits
        FL_ADDR,                        //  FLASH Address bus 22 Bits
        FL_WE_N,                        //  FLASH Write Enable
        FL_RST_N,                       //  FLASH Reset
        FL_OE_N,                        //  FLASH Output Enable
        FL_CE_N,                        //  FLASH Chip Enable
        ////////////////////    SRAM Interface      ////////////////
        SRAM_DQ,                        //  SRAM Data bus 16 Bits
        SRAM_ADDR,                      //  SRAM Address bus 18 Bits
        SRAM_UB_N,                      //  SRAM High-byte Data Mask 
        SRAM_LB_N,                      //  SRAM Low-byte Data Mask 
        SRAM_WE_N,                      //  SRAM Write Enable
        SRAM_CE_N,                      //  SRAM Chip Enable
        SRAM_OE_N,                      //  SRAM Output Enable
        ////////////////////    ISP1362 Interface   ////////////////
        OTG_DATA,                       //  ISP1362 Data bus 16 Bits
        OTG_ADDR,                       //  ISP1362 Address 2 Bits
        OTG_CS_N,                       //  ISP1362 Chip Select
        OTG_RD_N,                       //  ISP1362 Write
        OTG_WR_N,                       //  ISP1362 Read
        OTG_RST_N,                      //  ISP1362 Reset
        OTG_FSPEED,                     //  USB Full Speed, 0 = Enable, Z = Disable
        OTG_LSPEED,                     //  USB Low Speed,  0 = Enable, Z = Disable
        OTG_INT0,                       //  ISP1362 Interrupt 0
        OTG_INT1,                       //  ISP1362 Interrupt 1
        OTG_DREQ0,                      //  ISP1362 DMA Request 0
        OTG_DREQ1,                      //  ISP1362 DMA Request 1
        OTG_DACK0_N,                    //  ISP1362 DMA Acknowledge 0
        OTG_DACK1_N,                    //  ISP1362 DMA Acknowledge 1
        ////////////////////    LCD Module 16X2     ////////////////
        LCD_ON,                         //  LCD Power ON/OFF
        LCD_BLON,                       //  LCD Back Light ON/OFF
        LCD_RW,                         //  LCD Read/Write Select, 0 = Write, 1 = Read
        LCD_EN,                         //  LCD Enable
        LCD_RS,                         //  LCD Command/Data Select, 0 = Command, 1 = Data
        LCD_DATA,                       //  LCD Data bus 8 bits
        ////////////////////    SD_Card Interface   ////////////////
        SD_DAT,                         //  SD Card Data
        SD_WP_N,                        //  SD Write protect 
        SD_CMD,                         //  SD Card Command Signal
        SD_CLK,                         //  SD Card Clock
        ////////////////////    USB JTAG link   ////////////////////
        TDI,                            // CPLD -> FPGA (data in)
        TCK,                            // CPLD -> FPGA (clk)
        TCS,                            // CPLD -> FPGA (CS)
        TDO,                            // FPGA -> CPLD (data out)
        ////////////////////    I2C     ////////////////////////////
        I2C_SDAT,                       //  I2C Data
        I2C_SCLK,                       //  I2C Clock
        ////////////////////    PS2     ////////////////////////////
        PS2_DAT,                        //  PS2 Data
        PS2_CLK,                        //  PS2 Clock
        ////////////////////    VGA     ////////////////////////////
        VGA_CLK,                        //  VGA Clock
        VGA_HS,                         //  VGA H_SYNC
        VGA_VS,                         //  VGA V_SYNC
        VGA_BLANK,                      //  VGA BLANK
        VGA_SYNC,                       //  VGA SYNC
        VGA_R,                          //  VGA Red[9:0]
        VGA_G,                          //  VGA Green[9:0]
        VGA_B,                          //  VGA Blue[9:0]
        ////////////    Ethernet Interface  ////////////////////////
        ENET_DATA,                      //  DM9000A DATA bus 16Bits
        ENET_CMD,                       //  DM9000A Command/Data Select, 0 = Command, 1 = Data
        ENET_CS_N,                      //  DM9000A Chip Select
        ENET_WR_N,                      //  DM9000A Write
        ENET_RD_N,                      //  DM9000A Read
        ENET_RST_N,                     //  DM9000A Reset
        ENET_INT,                       //  DM9000A Interrupt
        ENET_CLK,                       //  DM9000A Clock 25 MHz
        ////////////////    Audio CODEC     ////////////////////////
        AUD_ADCLRCK,                    //  Audio CODEC ADC LR Clock
        AUD_ADCDAT,                     //  Audio CODEC ADC Data
        AUD_DACLRCK,                    //  Audio CODEC DAC LR Clock
        AUD_DACDAT,                     //  Audio CODEC DAC Data
        AUD_BCLK,                       //  Audio CODEC Bit-Stream Clock
        AUD_XCK,                        //  Audio CODEC Chip Clock
        ////////////////    TV Decoder      ////////////////////////
        TD_DATA,                        //  TV Decoder Data bus 8 bits
        TD_HS,                          //  TV Decoder H_SYNC
        TD_VS,                          //  TV Decoder V_SYNC
        TD_RESET,                       //  TV Decoder Reset
        TD_CLK27,                       //  TV Decoder 27MHz CLK
        ////////////////////    GPIO    ////////////////////////////
        GPIO_0,                         //  GPIO Connection 0
        GPIO_1                          //  GPIO Connection 1
    );

    ////////////////////////    Clock Input     ////////////////////////
    input           CLOCK_27;               //  27 MHz
    input           CLOCK_50;               //  50 MHz
    input           EXT_CLOCK;              //  External Clock
    ////////////////////////    Push Button     ////////////////////////
    input   [3:0]   KEY;                    //  Pushbutton[3:0]
    ////////////////////////    DPDT Switch     ////////////////////////
    input   [17:0]  SW;                     //  Toggle Switch[17:0]
    ////////////////////////    7-SEG Dispaly   ////////////////////////
    output  [6:0]   HEX0;                   //  Seven Segment Digit 0
    output  [6:0]   HEX1;                   //  Seven Segment Digit 1
    output  [6:0]   HEX2;                   //  Seven Segment Digit 2
    output  [6:0]   HEX3;                   //  Seven Segment Digit 3
    output  [6:0]   HEX4;                   //  Seven Segment Digit 4
    output  [6:0]   HEX5;                   //  Seven Segment Digit 5
    output  [6:0]   HEX6;                   //  Seven Segment Digit 6
    output  [6:0]   HEX7;                   //  Seven Segment Digit 7
    ////////////////////////////    LED     ////////////////////////////
    output  [8:0]   LEDG;                   //  LED Green[8:0]
    output  [17:0]  LEDR;                   //  LED Red[17:0]
    ////////////////////////////    UART    ////////////////////////////
    output          UART_TXD;               //  UART Transmitter
    input           UART_RXD;               //  UART Receiver
    ////////////////////////////    IRDA    ////////////////////////////
    output          IRDA_TXD;               //  IRDA Transmitter
    input           IRDA_RXD;               //  IRDA Receiver
    ///////////////////////     SDRAM Interface ////////////////////////
    inout   [15:0]  DRAM_DQ;                //  SDRAM Data bus 16 Bits
    output  [11:0]  DRAM_ADDR;              //  SDRAM Address bus 12 Bits
    output          DRAM_LDQM;              //  SDRAM Low-byte Data Mask 
    output          DRAM_UDQM;              //  SDRAM High-byte Data Mask
    output          DRAM_WE_N;              //  SDRAM Write Enable
    output          DRAM_CAS_N;             //  SDRAM Column Address Strobe
    output          DRAM_RAS_N;             //  SDRAM Row Address Strobe
    output          DRAM_CS_N;              //  SDRAM Chip Select
    output          DRAM_BA_0;              //  SDRAM Bank Address 0
    output          DRAM_BA_1;              //  SDRAM Bank Address 0
    output          DRAM_CLK;               //  SDRAM Clock
    output          DRAM_CKE;               //  SDRAM Clock Enable
    ////////////////////////    Flash Interface ////////////////////////
    inout   [7:0]   FL_DQ;                  //  FLASH Data bus 8 Bits
    output  [21:0]  FL_ADDR;                //  FLASH Address bus 22 Bits
    output          FL_WE_N;                //  FLASH Write Enable
    output          FL_RST_N;               //  FLASH Reset
    output          FL_OE_N;                //  FLASH Output Enable
    output          FL_CE_N;                //  FLASH Chip Enable
    ////////////////////////    SRAM Interface  ////////////////////////
    inout   [15:0]  SRAM_DQ;                //  SRAM Data bus 16 Bits
    output  [17:0]  SRAM_ADDR;              //  SRAM Address bus 18 Bits
    output          SRAM_UB_N;              //  SRAM High-byte Data Mask 
    output          SRAM_LB_N;              //  SRAM Low-byte Data Mask 
    output          SRAM_WE_N;              //  SRAM Write Enable
    output          SRAM_CE_N;              //  SRAM Chip Enable
    output          SRAM_OE_N;              //  SRAM Output Enable
    ////////////////////    ISP1362 Interface   ////////////////////////
    inout   [15:0]  OTG_DATA;               //  ISP1362 Data bus 16 Bits
    output  [1:0]   OTG_ADDR;               //  ISP1362 Address 2 Bits
    output          OTG_CS_N;               //  ISP1362 Chip Select
    output          OTG_RD_N;               //  ISP1362 Write
    output          OTG_WR_N;               //  ISP1362 Read
    output          OTG_RST_N;              //  ISP1362 Reset
    output          OTG_FSPEED;             //  USB Full Speed, 0 = Enable, Z = Disable
    output          OTG_LSPEED;             //  USB Low Speed,  0 = Enable, Z = Disable
    input           OTG_INT0;               //  ISP1362 Interrupt 0
    input           OTG_INT1;               //  ISP1362 Interrupt 1
    input           OTG_DREQ0;              //  ISP1362 DMA Request 0
    input           OTG_DREQ1;              //  ISP1362 DMA Request 1
    output          OTG_DACK0_N;            //  ISP1362 DMA Acknowledge 0
    output          OTG_DACK1_N;            //  ISP1362 DMA Acknowledge 1
    ////////////////////    LCD Module 16X2 ////////////////////////////
    inout   [7:0]   LCD_DATA;               //  LCD Data bus 8 bits
    output          LCD_ON;                 //  LCD Power ON/OFF
    output          LCD_BLON;               //  LCD Back Light ON/OFF
    output          LCD_RW;                 //  LCD Read/Write Select, 0 = Write, 1 = Read
    output          LCD_EN;                 //  LCD Enable
    output          LCD_RS;                 //  LCD Command/Data Select, 0 = Command, 1 = Data
    ////////////////////    SD Card Interface   ////////////////////////
    inout   [3:0]   SD_DAT;                 //  SD Card Data
    input           SD_WP_N;                //  SD write protect
    inout           SD_CMD;                 //  SD Card Command Signal
    output          SD_CLK;                 //  SD Card Clock
    ////////////////////////    I2C     ////////////////////////////////
    inout           I2C_SDAT;               //  I2C Data
    output          I2C_SCLK;               //  I2C Clock
    ////////////////////////    PS2     ////////////////////////////////
    input           PS2_DAT;                //  PS2 Data
    input           PS2_CLK;                //  PS2 Clock
    ////////////////////    USB JTAG link   ////////////////////////////
    input           TDI;                    // CPLD -> FPGA (data in)
    input           TCK;                    // CPLD -> FPGA (clk)
    input           TCS;                    // CPLD -> FPGA (CS)
    output          TDO;                    // FPGA -> CPLD (data out)
    ////////////////////////    VGA         ////////////////////////////
    output          VGA_CLK;                //  VGA Clock
    output          VGA_HS;                 //  VGA H_SYNC
    output          VGA_VS;                 //  VGA V_SYNC
    output          VGA_BLANK;              //  VGA BLANK
    output          VGA_SYNC;               //  VGA SYNC
    output  [9:0]   VGA_R;                  //  VGA Red[9:0]
    output  [9:0]   VGA_G;                  //  VGA Green[9:0]
    output  [9:0]   VGA_B;                  //  VGA Blue[9:0]
    ////////////////    Ethernet Interface  ////////////////////////////
    inout   [15:0]  ENET_DATA;              //  DM9000A DATA bus 16Bits
    output          ENET_CMD;               //  DM9000A Command/Data Select, 0 = Command, 1 = Data
    output          ENET_CS_N;              //  DM9000A Chip Select
    output          ENET_WR_N;              //  DM9000A Write
    output          ENET_RD_N;              //  DM9000A Read
    output          ENET_RST_N;             //  DM9000A Reset
    input           ENET_INT;               //  DM9000A Interrupt
    output          ENET_CLK;               //  DM9000A Clock 25 MHz
    ////////////////////    Audio CODEC     ////////////////////////////
    inout           AUD_ADCLRCK;            //  Audio CODEC ADC LR Clock
    input           AUD_ADCDAT;             //  Audio CODEC ADC Data
    inout           AUD_DACLRCK;            //  Audio CODEC DAC LR Clock
    output          AUD_DACDAT;             //  Audio CODEC DAC Data
    inout           AUD_BCLK;               //  Audio CODEC Bit-Stream Clock
    output          AUD_XCK;                //  Audio CODEC Chip Clock
    ////////////////////    TV Devoder      ////////////////////////////
    input   [7:0]   TD_DATA;                //  TV Decoder Data bus 8 bits
    input           TD_HS;                  //  TV Decoder H_SYNC
    input           TD_VS;                  //  TV Decoder V_SYNC
    output          TD_RESET;               //  TV Decoder Reset
    input           TD_CLK27;               //  TV Decoder 27MHz CLK
    ////////////////////////    GPIO    ////////////////////////////////
    inout   [35:0]  GPIO_0;                 //  GPIO Connection 0
    inout   [35:0]  GPIO_1;                 //  GPIO Connection 1


endmodule

In Cyclone II EP2C35F672C6, you should probably comment IRDA_TXD, IRDA_RXD, and SD_DAT related lines.