halmartin

U-Boot 2009.11-00043-gf4c39d3-serengeti_DEV_1.19.01 (Feb 15 2012 - 10:40:18)

CPU:   AMCC PowerPC 460 APM86290 at 1000 MHz PLB=500 MHz
       (SOC=1000 AXI=250 AHB=166 APB=83 EBC=100)
       Internal PCI arbiter disabled
       32 kB I-Cache 32 kB D-Cache
Board: Fullerene-2 - Meraki Fullerene Cloud Managed Router
I2C:   ready
DRAM:  -2 GB at 800MHz
Default enable MDIO for ETH0

halmartin

Third Party Software in FUJITSU iRMC Firmware

Product: iRMC S4 Firmware
Version: 09.60F
Date   : April 2020

Third party software may be included in this product.

The products and the corresponding license type is listed in the 
following sections.

halmartin

# tracer: nop
#
# entries-in-buffer/entries-written: 6616/6616   #P:1
#
#                              _-----=> irqs-off
#                             / _----=> need-resched
#                            | / _---=> hardirq/softirq
#                            || / _--=> preempt-depth
#                            ||| /     delay
#           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION

halmartin

LinuxLoader built Nov 12 2002 18:01:50
init_pll ok
init_spi ok
init_memctl ok
wait_memctl ok
Training DRAM ok
init_irq ok
init_dram_uncached ok
init_icache ok
init_dcache ok

halmartin

# ethtool eth0
Settings for eth0:
        Supported ports: [ FIBRE ]
        Supported link modes:   10000baseT/Full 
        Supported pause frame use: Symmetric
        Supports auto-negotiation: No
        Supported FEC modes: Not reported
        Advertised link modes:  10000baseT/Full 
        Advertised pause frame use: Symmetric
        Advertised auto-negotiation: No

halmartin

port up  mbps fdx aggrnum aggr_enabled pcap neighbor_state sflow hw_en stk trusted storm_ctrl isolated
   1  1  1000   1      -1            0    0          other     1     1   0       0          1        0
   2  0     0   0      -1            0    0          other     1     1   0       0          1        0
   3  0     0   0      -1            0    0          other     1     1   0       0          1        0
   4  0     0   0      -1            0    0          other     1     1   0       0          1        0
   5  0     0   0      -1            0    0          other     1     1   0       0          1        0
   6  0     0   0      -1            0    0          other     1     1   0       0          1        0
   7  0     0   0      -1            0    0          other     1     1   0       0          1        0
   8  0     0   0      -1            0    0          other     1     1   0       0          1        0
   9  0     0   0      -1            0    0          other     1     1   0       0          1    

halmartin

/ # strace -E LD_LIBRARY_PATH=/opt/lib -v -s 1024 /opt/bin/switch_brain
execve("/opt/bin/switch_brain", ["/opt/bin/switch_brain"], ["USER=root", "SHLVL=1", "HOME=/", "TERM=vt100", "PATH=/sbin:/usr/sbin:/bin:/usr/bin", "SHELL=/bin/sh", "PWD=/", "LD_LIBRARY_PATH=/opt/lib"]) = 0
set_thread_area(0x77328ec0)             = 0
set_tid_address(0x77321e28)             = 404
open("/opt/lib/libmeraki.so", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 3
fcntl64(3, F_SETFD, FD_CLOEXEC)         = 0
fstat64(3, {st_dev=makedev(0x1f, 0x3), st_ino=215, st_mode=S_IFREG|0755, st_nlink=1, st_uid=0, st_gid=0, st_blksize=1024, st_blocks=2560, st_size=1310343, st_atime=1591549954 /* 2020-06-07T17:12:34+0000 */, st_atime_nsec=0, st_mtime=1591549954 /* 2020-06-07T17:12:34+0000 */, st_mtime_nsec=0, st_ctime=1591549954 /* 2020-06-07T17:12:34+0000 */, st_ctime_nsec=0}) = 0
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\10\0\1\0\0\0p]\2\0004\0\0\0\0\0\0\0\7\20\0p4\0 \0\t\0\0\0\0\0\0\0\3\0\0pX\1\0\0X\1\0\0X\1\0\0\30\0\0\0\30\0\0\0\4\0\0\0\10\0\0\0\0\0\0p

halmartin

#!/usr/bin/env python3
# Copyright (C) 2020 Hal Martin
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
# 
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of

halmartin

#
# Automatically generated file; DO NOT EDIT.
# Linux/mips 3.18.123 Kernel Configuration
#
CONFIG_MIPS=y

#
# Machine selection
#
# CONFIG_MIPS_ALCHEMY is not set

halmartin

# This file is executed on every boot (including wake-boot from deepsleep)
import gc
gc.collect()

# connect to WiFi
import network
sta_if = network.WLAN(network.STA_IF)
sta_if.active(True)
sta_if.connect("MySSID","P4ssw0rd!")
from time import sleep