gistfile1.txt

Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.2-RELEASE #0: Fri Feb 18 02:24:46 UTC 2011
    root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU          420  @ 1.60GHz (1596.01-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x10661  Family = 6  Model = 16  Stepping = 1
  Features=0xafebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  Features2=0xe31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 1073741824 (1024 MB)
avail memory = 1026744320 (979 MB)
ACPI APIC Table: <012009 APIC1436>
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <012009 RSDT1436> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3fe00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xcc00-0xcc07 mem 0xfe780000-0xfe7fffff,0xe0000000-0xefffffff,0xfe740000-0xfe77ffff irq 16 at device 2.0 on pci0
agp0: <Intel 82945G (945G GMCH) SVGA controller> on vgapci0
agp0: detected 764k stolen memory
agp0: aperture size is 256M
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
hptrr0: <sx508x> port 0xd800-0xd8ff mem 0xfe800000-0xfe8fffff irq 16 at device 0.0 on pci1
hptrr: adapter at PCI 1:0:0, IRQ 16
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
hptrr1: <sx508x> port 0xe800-0xe8ff mem 0xfe900000-0xfe9fffff irq 17 at device 0.0 on pci2
hptrr: adapter at PCI 2:0:0, IRQ 17
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller  , ASIC rev. 0x00b002> mem 0xfeaf0000-0xfeafffff irq 18 at device 0.0 on pci3
bge0: CHIP ID 0x0000b002; ASIC REV 0x0b; CHIP REV 0xb0; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5787 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: 00:08:9b:8c:d9:04
bge0: [FILTER]
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci4: <ACPI PCI bus> on pcib4
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller  , ASIC rev. 0x00b002> mem 0xfebf0000-0xfebfffff irq 19 at device 0.0 on pci4
bge1: CHIP ID 0x0000b002; ASIC REV 0x0b; CHIP REV 0xb0; PCI-E
miibus1: <MII bus> on bge1
brgphy1: <BCM5787 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Ethernet address: 00:08:9b:8c:d9:05
bge1: [FILTER]
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xc880-0xc89f irq 23 at device 29.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xc800-0xc81f irq 19 at device 29.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xc480-0xc49f irq 18 at device 29.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xc400-0xc41f irq 16 at device 29.3 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x2f00
usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe73bc00-0xfe73bfff irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: parallel port not found.
p4tcc0: <CPU Frequency Thermal Control> on cpu0
Timecounter "TSC" frequency 1596010616 Hz quality 800
Timecounters tick every 1.000 msec
hptrr0: [GIANT-LOCKED]
hptrr0: [ITHREAD]
hptrr1: [GIANT-LOCKED]
hptrr1: [ITHREAD]
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc0fd97b4
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ad0: 122MB <128MB ATA Flash Disk ADAA408J> at ata0-master WDMA2 
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Root mount waiting for: usbus4
ugen4.2: <vendor 0x1221> at usbus4
umass0: <vendor 0x1221 Flash Disk, class 0/0, rev 2.00/0.00, addr 2> on usbus4
umass0:  SCSI over Bulk-Only; quirks = 0x0000
Root mount waiting for: usbus4
umass0:2:0:-1: Attached to scbus2
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <USB2.0 Flash Disk 2.40> Removable Direct Access SCSI-2 device 
da0: 40.000MB/s transfers
da0: 1014MB (2077440 512 byte sectors: 64H 32S/T 1014C)
GEOM: da0: geometry does not match label (255h,63s != 64h,32s).
GEOM: da0: media size does not match label.
Trying to mount root from ufs:/dev/md0
ugen2.2: <vendor 0x062a> at usbus2
ukbd0: <vendor 0x062a USB-compliant keyboard, class 0/0, rev 1.10/1.00, addr 2> on usbus2
kbd2 at ukbd0
ums0: <vendor 0x062a USB-compliant keyboard, class 0/0, rev 1.10/1.00, addr 2> on usbus2
ums0: 0 buttons and [XYZ] coordinates ID=5