stdin

stdin

bootf
booting system partition 0:0
USB:   USB 2.0 started, EHCI 1.00scanning bus for devices... 2 USB Device(s) found
       scanning bus for storage devices... max USB Storage Device reached: 1 stopping
1 Storage Device(s) found
1 blocks read: OK
Loading image 0:0..........................................................................................................................................................................................................
Booting image...
Signer Cert OK
Policy Cert OK
RSA signature verified. 
0:<5>0:
Aruba Networks
ArubaOS Version 7.4.0.2 (build 48818 / label #48818) 
Built by p4build@port-royal on 2015-02-27 at 10:04:19 PST (gcc version 3.4.3)
0:Using default Mac address
0:XLR Physical Address Exclude Region: 0x3c00000
0:HACK: forcing xlr_board_major_version to ARUBA_CORVINA (7)
0:<5>511MB HIGHMEM available.
0:<7>On node 0 totalpages: 262112
0:<7>  DMA zone: 131072 pages, LIFO batch:31
0:<7>  DMA32 zone: 0 pages, LIFO batch:0
0:<7>  Normal zone: 0 pages, LIFO batch:0
0:<7>  HighMem zone: 131040 pages, LIFO batch:31
0:(PROM) CPU present map: f SOS_CPU_MAP: 0xf0 online CPUs: 0xff cli_cpu:4
0:Phys CPU present map: f, possible map f
0:Detected 3 Slave CPU(s)
0:<6>LTT : ltt-base init
0:Primary instruction cache 32kB, 8-way, linesize 32 bytes.
0:Primary data cache 32kB 8-way, linesize 32 bytes.
0:Setting up NMI Handler for Axxx platforms
0:mips_hpt_frequency = 750000000
0:Using 750.000 MHz high precision timer. cycles_per_jiffy=7500000
0:phoenix_timer_setup: non_core_cpus:3 Maxval:3640e mask:e
0:phoenix_timer_setup: phoenix_timer_stats = 84004a20, phoenix_timer_diff = 84004a40, 
    phoenix_timer_count = 84004a60, phoenix_timer_epc = 84004a80, 
    phoenix_timer_cpu = 84004aa0, phoenix_timer_gettimeoffset = 84004ac0
    max_val[0] = a2c2a, max_val[others] = 3640e, 
0:<6>Memory: 701064k/252416k available (4184k kernel code, 74788k reserved, 858k data, 59480k init, 524160k highmem)
0:<7>Calibrating delay loop... 0:167.11 BogoMIPS (lpj=835584)
0:<6>Security Framework v1.0.0 initialized
0:<6>Capability LSM initialized
0: available.
0:(PROM): waking up phys cpu# 1, bucket_1, gp = 84ace000
0:(PROM): sent a wakeup message to bucket 1
1:Initializing CPU:0 (1), current=84ab4048, gp = 84ace000
1:<7>Calibrating delay loop... 1:174.08 BogoMIPS (lpj=870400)
1:<7>Calibrating delay loop... 1:173.26 BogoMIPS (lpj=866304)
0:(PROM): waking up phys cpu# 2, bucket_2, gp = 84af6000
0:(PROM): sent a wakeup message to bucket 2
2:Initializing CPU:0 (2), current=84abb028, gp = 84af6000
2:<7>Calibrating delay loop... 2:247.39 BogoMIPS (lpj=1236992)
2:<7>Calibrating delay loop... 2:247.39 BogoMIPS (lpj=1236992)
0:(PROM): waking up phys cpu# 3, bucket_3, gp = 84afe000
0:(PROM): sent a wakeup message to bucket 3
3:Initializing CPU:0 (3), current=84ad4048, gp = 84afe000
3:<7>Calibrating delay loop... 3:3.27 BogoMIPS (lpj=16352)
3:<7>Calibrating delay loop... 3:374.37 BogoMIPS (lpj=1871872)
0:<6>Brought up 4 CPUs
1:migration_cost=1:100001:
0:<5>detected lzma initramfs
0:<5>initramfs: LZMA lc=3,lp=0,pb=2,dictSize=8388608,origSize=163934208
0:<5>LZMA initramfs by Ming-Ching Tiew <[email protected]> <Garbo>
0:<6>Initializing Aruba nodeinfo Netlink Socket
0:[pcibios_init]: IO-Remapped phys=10000000, size=1000000 to vaddr=b0000000
0:[pcibios_init]: IO-Remapped phys=15000000, size=100000 to vaddr=b5000000
0:Registering XLR/XLS PCIX/PCIE Controller. 
0:<5>SCSI subsystem initialized
0: ******* PCI-PHOENIX SETTING UP B0 DEVICE *******
0: ******* PCI-PHOENIX SETTING UP B0 DEVICE *******
0: ******* PCI-PHOENIX SETTING UP B0 DEVICE *******
0: ******* PCI-PHOENIX SETTING UP B0 DEVICE *******
0:<6>LTT : ltt-facilities init
0:<6>LTT : ltt-heartbeat init
0:highmem bounce pool size: 64 pages
0:<6>LTT : ltt-facility-core init in kernel
0:<6>LTT : ltt-facility-fs init in kernel
0:<6>LTT : ltt-facility-ipc init in kernel
0:<6>LTT : ltt-facility-kernel_arch init in kernel
0:<6>LTT : ltt-facility-kernel init in kernel
0:<6>LTT : ltt-facility-locking init in kernel
0:<6>LTT : ltt-facility-memory init in kernel
0:<6>LTT : ltt-facility-network init in kernel
0:<6>LTT : ltt-facility-process init in kernel
0:<6>LTT : ltt-facility-socket init in kernel
0:<6>LTT : ltt-facility-timer init in kernel
0:<6>LTT : ltt-facility-statedump init in kernel
0:<6>LTT : ltt-facility-network_ip_interface init in kernel
0:<6>LTT : ltt-core init as module
0:<6>ltt-control init
0:<6>LTT : ltt-facility-statedump init
0:<6>hw_random hardware driver 1.0.0 loaded
0:Registered XLR tracebuffer driver with Major No. [0]
0:[drivers/char/xlrinfo/xlrinfo.c@419|xlrinfo_init]: cpu_0: xlrinfo_init: BEGIN RMIINFO_INIT 
0:Registered sos console serial driver
0:Coredump handling done by CPU3
0:upic initialization done
0:System time change notify driver inited
0:Function [virtual_uart_init]Loader support not enabled. Returning from virtual_uart_init
0:ppe: found ppe device (de24)
0:<7>PCI: Setting latency timer of device 0000:01:00.0 to 64
0:ppe: ppe unit 0 <0x64000000-0x64100000> & <0x60000000-0x64000000>
0:ppe: found ppe device (de24)
0:<7>PCI: Setting latency timer of device 0000:02:00.0 to 64
0:ppe: ppe unit 1 <0x6c000000-0x6c100000> & <0x68000000-0x6c000000>
0:RAMDISK driver initialized: 16 RAM disks of 87040K size 1024 blocksize
0:[user_mac_init]: user_mac_data=0x52ed28, psb_shm_size=0x800000
0:Registered phoenix user_mac driver: major=0
0:[drivers/net/sos_msg.c@3875|sos_msg_init_module]: cpu_0: Registering sos_msg_driver
0:Regsitering for cpus in mask:0xe0 from 1 to 2
0:rtgw_tunnel_init
0:stacking interface driver 0:inited
0:Loopback interface driver inited
0:<6>PPP generic driver version 2.4.2
0:<6>PPP Deflate Compression module registered
0:<6>PPP BSD Compression module registered
0:<5>physmap flash device: 1000000 at 1c000000
0:<6>phys_mapped_flash: Found 1 x16 devices at 0x0 in 8-bit bank
0: Amd/Fujitsu Extended Query Table at 0x0040
0:<4>phys_mapped_flash: CFI does not contain boot bank location. Assuming top.
0:<5>number of CFI chips: 1
0:Parsing the partition  info
0:Adding partitions...
0:<5>Using physmap partition definition
0:<5>Creating 2 MTD partitions on "phys_mapped_flash":
0:<5>0x00000000-0x00220000 : "bootROM"
0:<5>0x00220000-0x00800000 : "nvram-eeprom"
0:<6>ehci-xls ehci-xls.0: XLS EHCI Host Controller
0:<6>ehci-xls ehci-xls.0: new USB bus registered, assigned bus number 1
0:<6>ehci-xls ehci-xls.0: irq 39, io mem 0x1ef24000
0:<6>ehci-xls ehci-xls.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
0:USB Device: 0x00000000
0:USB Product: XLS EHCI Host Controller
0:USB Manufacturer: Linux 2.6.16 ehci_hcd
0:USB SerialNumber: ehci-xls
0:<6>usb usb1: c->desc.bMaxPower 0, udev->busmA 0
0:<6>usb usb1: configuration #1 chosen from 1 choice
0:<6>hub 1-0:1.0: USB hub found
0:<6>hub 1-0:1.0: 2 ports detected
0:<7>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
0:<6>ohci-xls ohci-xls.1: XLS OHCI Host Controller
0:<6>ohci-xls ohci-xls.1: new USB bus registered, assigned bus number 2
0:<6>ohci-xls ohci-xls.1: irq 39, io mem 0x1ef24400
0:USB Device: 0x00000000
0:USB Product: XLS OHCI Host Controller
0:USB Manufacturer: Linux 2.6.16 ohci_hcd
0:USB SerialNumber: ohci-xls
0:<6>usb usb2: c->desc.bMaxPower 0, udev->busmA 0
0:<6>usb usb2: configuration #1 chosen from 1 choice
0:<6>hub 2-0:1.0: USB hub found
0:<6>hub 2-0:1.0: 1 port detected
0:<6>ohci-xls ohci-xls.2: XLS OHCI Host Controller
0:<6>ohci-xls ohci-xls.2: new USB bus registered, assigned bus number 3
0:<6>ohci-xls ohci-xls.2: irq 39, io mem 0x1ef24800
0:USB Device: 0x00000000
0:USB Product: XLS OHCI Host Controller
0:USB Manufacturer: Linux 2.6.16 ohci_hcd
0:USB SerialNumber: ohci-xls
0:<6>usb usb3: c->desc.bMaxPower 0, udev->busmA 0
0:<6>usb usb3: configuration #1 chosen from 1 choice
0:<6>hub 3-0:1.0: USB hub found
0:<6>hub 3-0:1.0: 1 port detected
0:<6>USB Universal Host Controller Interface driver v2.3
0:<6>Initializing USB Mass Storage driver...
2:<6>usb 2-1: new full speed USB device using ohci-xls and address 2
0:<6>usb 2-1: not running at top speed; connect to a high speed hub
0:USB Device: 0x058f6387
0:USB Product: USB DISK
0:USB Manufacturer: SMI Corporation
0:USB SerialNumber: AA04012700032159
0:<6>usb 2-1: c->desc.bMaxPower 50, udev->busmA 500
0:<6>usb 2-1: configuration #1 chosen from 1 choice
0:<6>scsi0 : SCSI emulation for USB Mass Storage devices
2:<7>usb-storage: device found at 2
0:<6>USB Mass Storage support registered.
0:Intializing I2C Host Adapter...0:done.
0:i2c-palm-bk3220: Added I2C Bus 0
0:Intializing I2C Host Adapter...0:done.
0:i2c-palm-bk3220: Added I2C Bus 1
0:<6>i2c-corvina: using default base 0xbef18000
0:isl1221_init: skipping isl1221 rtc initialization
0:<6>m41t11 3-0068: Found M41T11 RTC on Virtual I2C (i2c-0, mux 70:00) at 68
0:<6>eeprom 4-0050: Found eeprom on Virtual I2C (i2c-0, mux 70:01) at 50
0:<6>eeprom 5-0050: Found eeprom on Virtual I2C (i2c-0, mux 70:02) at 50
0:<6>eeprom 6-0052: Found eeprom on Virtual I2C (i2c-0, mux 70:03) at 52
0:<6>eeprom 7-0050: Found eeprom on Virtual I2C (i2c-0, mux 70:04) at 50
0:<6>eeprom 7-0051: Found eeprom on Virtual I2C (i2c-0, mux 70:04) at 51
0:<6>eeprom 7-0053: Found eeprom on Virtual I2C (i2c-0, mux 70:04) at 53
0:<6>eeprom 7-0056: Found eeprom on Virtual I2C (i2c-0, mux 70:04) at 56
0:<6>eeprom 8-0050: Found eeprom on Virtual I2C (i2c-0, mux 70:05) at 50
0:<6>eeprom 8-0051: Found eeprom on Virtual I2C (i2c-0, mux 70:05) at 51
0:<6>eeprom 8-0053: Found eeprom on Virtual I2C (i2c-0, mux 70:05) at 53
0:<6>eeprom 8-0056: Found eeprom on Virtual I2C (i2c-0, mux 70:05) at 56
0:<6>eeprom 9-0050: Found eeprom on Virtual I2C (i2c-0, mux 70:06) at 50
0:<6>eeprom 9-0051: Found eeprom on Virtual I2C (i2c-0, mux 70:06) at 51
0:<6>eeprom 9-0053: Found eeprom on Virtual I2C (i2c-0, mux 70:06) at 53
0:<6>eeprom 9-0056: Found eeprom on Virtual I2C (i2c-0, mux 70:06) at 56
0:<6>eeprom 10-0050: Found eeprom on Virtual I2C (i2c-0, mux 70:07) at 50
0:<6>eeprom 10-0051: Found eeprom on Virtual I2C (i2c-0, mux 70:07) at 51
0:<6>eeprom 10-0053: Found eeprom on Virtual I2C (i2c-0, mux 70:07) at 53
0:<6>eeprom 10-0056: Found eeprom on Virtual I2C (i2c-0, mux 70:07) at 56
0:<6>pca954x 0-0070: Registered 8 virtual busses for I2C switch pca9548
0:i2c_xls_addr_only: No Ack received (status: 000a)
0:<6>i2c_adapter i2c-1: pca954x not found or failed to read reg at 0x71
0:i2c_xls_addr_only: No Ack received (status: 000a)
0:<6>i2c_adapter i2c-1: pca954x not found or failed to read reg at 0x72
0:i2c_xls_addr_only: No Ack received (status: 000a)
0:<6>i2c_adapter i2c-1: pca954x not found or failed to read reg at 0x73
0:Registering Phoenix I2C based TPM driver...
0:<6>w83793 9-002d: Found W83793 on Virtual I2C (i2c-0, mux 70:06) at 2d
0:<6>lm75 6-0048: Found LM75 on Virtual I2C (i2c-0, mux 70:03) at 48
0:<6>lm75 8-0048: Found LM75 on Virtual I2C (i2c-0, mux 70:05) at 48
0:<6>lm75 8-0049: Found LM75 on Virtual I2C (i2c-0, mux 70:05) at 49
0:<6>lm75 8-004a: Found LM75 on Virtual I2C (i2c-0, mux 70:05) at 4a
2:<7>usb-storage: waiting for device to settle before scanning
0:<6>lo: Disabled Privacy Extensions
0:<6>IPv6 over IPv4 tunneling driver
0:<6>802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
0:<6>All bugs added by David S. Miller <[email protected]>
Aruba Networks
ArubaOS Version 7.4.0.2 (build 48818 / label #48818) 
Built by p4build@port-royal on 2015-02-27 at 10:04:19 PST (gcc version 3.4.3)
Copyright (c) 2002-2015, Aruba Networks, Inc.
         <<<<<    Welcome to Aruba Networks - Aruba S2500-48P    >>>>>
0:<5>  Vendor: 0:S0:M0:I0: 0: 0: 0: 0: 0:  Model: 0:U3:S3:B3: 3:D3:I3:S3:K3: 3: 3: 3: 3: 3: 3: 3: 3:  Rev: 3:13:13:03:03:
3:<5>  Type:   Direct-Access     3:                 ANSI SCSI revision: 003:
3:<5>SCSI device sda: 1957888 512-byte hdwr sectors (1002 MB)
3:<5>sda: Write Protect is off
3:<7>sda: Mode Sense: 43 00 00 00
3:<3>sda: assuming drive cache: write through
3:<5>SCSI device sda: 1957888 512-byte hdwr sectors (1002 MB)
3:<5>sda: Write Protect is off
3:<7>sda: Mode Sense: 43 00 00 00
3:<3>sda: assuming drive cache: write through
3:<6> sda:Starting watchdo3: sda1g processes3: sda23: sda33:
3:<5>sd 0:0:0:0: Attached scsi disk sda
3:<7>usb-storage: device scan complete
Tuning IPv4 route cache...Performing CompactFlash fast test...  Checking for file system...
Passed.
2:<6>kjournald starting.  Commit interval 5 seconds
2:<6>EXT3 FS on sda3, 2:internal journal
2:<6>EXT3-fs: mounted filesystem with ordered data mode.
Reboot Cause: Power cycle/failure (0xee:0xee:0xb)
2:<3>aruba_n_nl_rcv_msg: passed module #(1) doesn't match with registered one(0)
2:<3>aruba_n_nl_rcv_msg: passed module #(3) doesn't match with registered one(0)
2:<4>process `syslogd' is using obsolete setsockopt SO_BSDCOMPAT
Restoring the database...done.
SKIPPING Generating SSH Keys......done.
Initializing TPM and Certificates
3:Send 3 start
3:Send 2 start
3:Send 1 start
3:TPM driver running in 3204 mode
TPM and Certificate Initialization successful.
164364
PoE firmware [Ok]
1:<3>aruba_n_nl_rcv_msg: passed module #(1) doesn't match with registered one(0)
2:<3>aruba_n_nl_rcv_msg: passed module #(1) doesn't match with registered one(0)
2:<3>aruba_n_nl_rcv_msg: passed module #(1) doesn't match with registered one(0)
3:<6>aruba_n_nl_rcv_msg: Registering module(3), buffer len:82
3:<6>aruba_n_nl_rcv_msg: Registered a new module(3), buffer len(82)
0:<3>aruba_n_nl_rcv_msg: passed module #(1) doesn't match with registered one(0)
3:eth1.4095: Setting MAC address to 3: 003: 0b3: 863: 013: 003: 003:.
3:VLAN (eth1.4095):  Setting underlying device (eth1) to promiscious mode.
3:<6>aruba_n_nl_rcv_msg: Registering module(1), buffer len:9
3:<6>aruba_n_nl_rcv_msg: Registered a new module(1), buffer len(9)
3:<6>aruba_n_nl_rcv_msg: Setting module's(1) buffer. Len of buffer=9
3:0 do_newlink
3:1 do_newlink
0:<6>aruba_n_nl_rcv_msg: GET data request for module's(1), buffer len=9
0:0 do_newlink
0:1 do_newlink
3:0 do_newlink
3:1 do_newlink
3:<6>aruba_n_nl_rcv_msg: GET data request for module's(1), buffer len=9
3:<6>aruba_n_nl_rcv_msg: Setting module's(3) buffer. Len of buffer=82
3:<6>aruba_n_nl_rcv_msg: Setting module's(3) buffer. Len of buffer=82
2:<6>aruba_n_nl_rcv_msg: GET data request for module's(1), buffer len=9
2:<6>aruba_n_nl_rcv_msg: GET data request for module's(3), buffer len=82
0:<6>aruba_n_nl_rcv_msg: Setting module's(3) buffer. Len of buffer=82
3:<6>aruba_n_nl_rcv_msg: GET data request for module's(1), buffer len=9
3:<6>aruba_n_nl_rcv_msg: GET data request for module's(1), buffer len=9
0:<4>process `snmpd' is using obsolete setsockopt SO_BSDCOMPAT
1:<6>aruba_n_nl_rcv_msg: GET data request for module's(3), buffer len=82
0:<6>usb 1-2: new high speed USB device using ehci-xls and address 2
0:USB Device: 0x078155a5
0:USB Product: Cruzer Snap
0:USB Manufacturer: SanDisk
0:USB SerialNumber: 4C530000230822108383
0:<6>usb 1-2: c->desc.bMaxPower 100, udev->busmA 500
0:<6>usb 1-2: configuration #1 chosen from 1 choice
0:<6>scsi1 : SCSI emulation for USB Mass Storage devices
2:<7>usb-storage: device found at 2
2:<7>usb-storage: waiting for device to settle before scanning
3:<6>aruba_n_nl_rcv_msg: GET data request for module's(1), buffer len=9
0:<5>  Vendor: 0:S0:a0:n0:D0:i0:s0:k0: 0:  Model: 0:C1:r1:u1:z1:e1:r1: 1:S1:n1:a1:p1: 1: 1: 1: 1: 1:  Rev: 1:11:.1:01:01:
1:<5>  Type:   Direct-Access     1:                 ANSI SCSI revision: 061:
1:<5>SCSI device sdb: 30031872 512-byte hdwr sectors (15376 MB)
1:<5>sdb: Write Protect is off
1:<7>sdb: Mode Sense: 43 00 00 00
1:<3>sdb: assuming drive cache: write through
1:<5>SCSI device sdb: 30031872 512-byte hdwr sectors (15376 MB)
1:<5>sdb: Write Protect is off
1:<7>sdb: Mode Sense: 43 00 00 00
1:<3>sdb: assuming drive cache: write through
1:<6> sdb:1: sdb11:
1:<5>sd 1:0:0:0: Attached scsi removable disk sdb
1:<7>usb-storage: device scan complete
******************************************** 
Starting Console Session 
Retrieving Configuration ... 
******************************************** 
0:<6>aruba_n_nl_rcv_msg: Setting module's(1) buffer. Len of buffer=9
1:<6>aruba_n_nl_rcv_msg: Setting module's(3) buffer. Len of buffer=82
2:<6>aruba_n_nl_rcv_msg: GET data request for module's(3), buffer len=82
1:<6>aruba_n_nl_rcv_msg: Setting module's(3) buffer. Len of buffer=82
2:<4>process `trapd' is using obsolete setsockopt SO_BSDCOMPAT
3:<6>aruba_n_nl_rcv_msg: Setting module's(3) buffer. Len of buffer=82
(ArubaS2500-48P) 
User: 0:<3>VFS: Can't find ext3 filesystem on dev sdb.
0:VFS: Can't find an ext2 filesystem on dev sdb.
0:<3>FAT: invalid media value (0xf3)
0:<6>VFS: Can't find a valid FAT filesystem on dev sdb.
2:<6>aruba_n_nl_rcv_msg: Setting module's(3) buffer. Len of buffer=82
User: 1:<6>aruba_n_nl_rcv_msg: Setting module's(3) buffer. Len of buffer=82
admin
Password: ***0:<3>VFS: Can't find ext3 filesystem on dev sdb1.
0:VFS: Can't find an ext2 filesystem on dev sdb1.
*******
(ArubaS2500-48P) >?
enable                  Turn on Privileged commands
exit                    Exit this session. Any unsaved changes are lost.
help                    Help on CLI command line processing and a 
                        Description of the interactive help system
logout                  Exit this session. Any unsaved changes are lost.
ping                    Send ICMP echo packets to the specified ip address.
tracepath               Trace path to the specified IPv6 address.
traceroute              Trace route to the specified ip address.
(ArubaS2500-48P) >enable
Password:**********
Password:**********
(ArubaS2500-48P) #?
aaa                     Show/update AAA info
activate                Activate services
add                     Add stacking interfaces
backup                  backup the flash's important directories
boot                    Set boot parameters
clear                   Clear configuration or statistics
clock                   Configure the system clock
configure               Configuration Commands 
copy                    Copy Files
crypto                  Configure IPSec, IKE, and CA
database                Database management
delete                  Delete stacking interfaces
dir                     list the directory contents of flash or external USB
eject                   unmount the external USB
encrypt                 Command controls the display of passwords and keys 
                        in CLI/WEBUI.
halt                    Halt the switch (it will not reboot)
help                    Help on CLI command line processing and a 
                        Description of the interactive help system
local-userdb            Configure the Local User Database
local-userdb-guest      Configure a guest user in local user database
mkdir                   create the directory at external USB
no                      Delete Command
page                    Page
--More-- (q) quit (u) pageup (/) search (n) repeat
                                                  
paging                  Output paging
--More-- (q) quit (u) pageup (/) search (n) repeat
                                                  
ping                    Send ICMP echo packets to the specified ip address.
--More-- (q) quit (u) pageup (/) search (n) repeat
                                                  
process                 Process level operations
--More-- (q) quit (u) pageup (/) search (n) repeat
                                                  
quick-setup             Configure basic system properties
--More-- (q) quit (u) pageup (/) search (n) repeat
                                                  
rcli                    Access Stack member console
--More-- (q) quit (u) pageup (/) search (n) repeat
                                                  
recoverymode_delete     Remove a file from recovery_fs or Purge specific
--More-- (q) quit (u) pageup (/) search (n) repeat
                                                  
recoverymode_dir        list the directory contents from recovery_fs
--More-- (q) quit (u) pageup (/) search (n) repeat
                                                  
reload                  Coldstart the switch
--More-- (q) quit (u) pageup (/) search (n) repeat
                                                  
rename                  rename a flash or external USB resident 
                        file/directory
--More-- (q) quit (u) pageup (/) search (n) repeat
                                                  
restore                 restore file or configuration
--More-- (q) quit (u) pageup (/) search (n) repeat
                                                  
run                     Start diagnostics 
--More-- (q) quit (u) pageup (/) search (n) repeat
                                                  
set                     Configure
--More-- (q) quit (u) pageup (/) search (n) repeat
                                                  
show                    Show Commands 
--More-- (q) quit (u) pageup (/) search (n) repeat
                                                  
support                 Engineering Debug Commands 
--More-- (q) quit (u) pageup (/) search (n) repeat
                                                  
system                  System related commands
--More-- (q) quit (u) pageup (/) search (n) repeat
(ArubaS2500-48P) #show mem
Memory (Kb): total: 760756, used: 364372, free: 396384
(ArubaS2500-48P) #show stor
Filesystem                Size      Used Available Use% Mounted on
none                    300.0M      2.2M    297.8M   1% /tmp
/dev/ud3                755.6M     17.3M    699.9M   2% /flash
/dev/usbdisk/eud_p1      14.3G     38.1M     14.3G   0% /mnt/usbdisk/sdb1_p1
(ArubaS2500-48P) #dir usb:
Partition ID: 0
Partition Not mounted
Partition ID: 1
-rwxr-xr-x    1 root     root        24411 Mar  5 07:38 EquilibriumConstant.xlsx
-rwxr-xr-x    1 root     root       351047 Feb  6 10:41 Molar Mass by Freezing Point Depression.pdf
drwxr-xr-x    4 root     root         8192 Jan 26 06:21 System Volume Information
-rwxr-xr-x    1 root     root       326535 Feb 28 08:11 The Kinetics of a Redox Reaction.pdf
drwxr-xr-x    2 root     root         8192 Feb  5 12:16 certs
-rwxr-xr-x    1 root     root        25084 Jun 20  2014 create_mgs_tables.sql
-rwxr-xr-x    1 root     root          204 Jun 16  2014 create_mgs_user.sql
-rwxr-xr-x    1 root     root       125746 Mar  5 07:27 equilibriumconstant.pdf
-rwxr-xr-x    1 root     root       166467 Feb 27 22:23 kineticsredox.pdf
drwxr-xr-x    2 root     root         8192 Feb  6 07:59 lab2
drwxr-xr-x    2 root     root         8192 Feb  8 02:44 mgs_ch4
drwxr-xr-x    2 root     root         8192 Feb 15 02:29 mgs_ch5
drwxr-xr-x    2 root     root         8192 Feb 29 09:47 mgs_ch7
drwxr-xr-x    2 root     root         8192 Feb 29 10:04 mgs_ch8
-rwxr-xr-x    1 root     root           81 Apr 17  2012 product_details.sql
-rwxr-xr-x    1 root     root          233 Apr 17  2012 product_statements.sql
--More-- (q) quit (u) pageup (/) search (n) repeat
(ArubaS2500-48P) #
(ArubaS2500-48P) # tar
% Incomplete command.
(ArubaS2500-48P) #tar ?
clean                   remove a tar file
crash                   tar the crash directory to crash.tar.gz
debug-logs              Help not defined
flash                   tar and compress the /flash directory to 
                        flash.tar.gz
logs                    tar the logs directory to logs.tar.gz
(ArubaS2500-48P) #tar tar flash
                          ^
% Invalid input detected at '^' marker.
(ArubaS2500-48P) #tar tar flash
 flash 
This command can take upto 5-7mins for each member. Are you sure you want to continue. Press 'y' to proceed : [y/n]: y
Taring flash
File flash.tar.gz created successfully on flash.
Please copy it out of the switch and delete it when done.
(ArubaS2500-48P) #dir
-rw-r--r--    1 root     root         4793 Apr 27 15:33 default.cfg
-rw-r--r--    1 root     root        48820 Apr 27 19:17 flash.tar.gz
-rw-r--r--    1 root     root           40 Apr 27 19:11 stack_db.db
drwx------    2 root     root         4096 Mar 27  2016 tpm
(ArubaS2500-48P) #copy flash: 
usb: 
% Incomplete command.
(ArubaS2500-48P) #copy usb: ?
<filename>              complete path of the file/directory relative to usb 
                        partition
snapshot                splash the Aruba Imagefile in raw format
(ArubaS2500-48P) #copy usb: flash.tar.gz 
% Incomplete command.
(ArubaS2500-48P) #copy usb: flash.tar.gz fl
flash:                  Copy to the flash resident filesystem
ftp:                    FTP file system
member:                 Copy to a Stack member
scp:                    Secure file Transfer
system:                 System Partition
tftp:                   TFTP file system
usbpartition            partition of external USB
(ArubaS2500-48P) #copy usb: flash.tar.gz flash: ?
<flashfilename>         the complete path of file relative to flash resident 
                        filesystem
(ArubaS2500-48P) #copy usb: flash.tar.gz flash: flash.tar.gz
WARNING: This operation may take a few minutes depending upon network response and file size. Do you really want to continue (y/n)? y
 Verifying file at external USB drive
Not a valid path at usb For more info on partition execute dir usb: cli
(ArubaS2500-48P) #copy usb: flash.tar.gz flash: flash.tar.gz
/flash.tar.gz flash: flash.tar.gz
WARNING: This operation may take a few minutes depending upon network response and file size. Do you really want to continue (y/n)? y
 Verifying file at external USB drive
Not a valid path at usb For more info on partition execute dir usb: cli
(ArubaS2500-48P) #copy usb: /flash.tar.gz flash: flash.tar.gz
dir usb: 
 cli
 cli does not exist 
(ArubaS2500-48P) #dir usb: cli
dir usb: cli
copy usb: /flash.tar.gz flash: flash.tar.gz
flash.tar.gz flash: flash.tar.gz 
WARNING: This operation may take a few minutes depending upon network response and file size. Do you really want to continue (y/n)? y
 Verifying file at external USB drive
Not a valid path at usb For more info on partition execute dir usb: cli
(ArubaS2500-48P) #copy flash: flash.tar.gz usb: 
% Incomplete command.
(ArubaS2500-48P) #copy flash: flash.tar.gz usb: flash.tar.gz
WARNING: This operation may take a few minutes depending upon network response and file size. Do you really want to continue (y/n)? y
....
File copied Successfully 
(ArubaS2500-48P) #0:<6>usb 1-2: USB disconnect, address 2
0:<3>sd 1:0:0:0: rejecting I/O to device being removed
0:<3>sd 1:0:0:0: rejecting I/O to device being removed
0:<3>sd 1:0:0:0: rejecting I/O to device being removed
0:<3>sd 1:0:0:0: rejecting I/O to device being removed
0:<3>sd 1:0:0:0: rejecting I/O to device being removed
0:<3>Buffer I/O error on device sdb1, logical block 18147
0:<4>lost page write due to I/O error on sdb1
0:<3>sd 1:0:0:0: rejecting I/O to device being removed
0:<3>Buffer I/O error on device sdb1, logical block 3508
0:<4>lost page write due to I/O error on sdb1
0:<3>sd 1:0:0:0: rejecting I/O to device being removed
0:<3>Buffer I/O error on device sdb1, logical block 3499
0:<4>lost page write due to I/O error on sdb1
0:<3>sd 1:0:0:0: rejecting I/O to device being removed
0:<3>Buffer I/O error on device sdb1, logical block 1
0:<4>lost page write due to I/O error on sdb1
0:<3>sd 1:0:0:0: rejecting I/O to device being removed
0:<3>Buffer I/O error on device sdb1, logical block 18156
0:<4>lost page write due to I/O error on sdb1
0:<3>sd 1:0:0:0: rejecting I/O to device being removed
0:<3>Buffer I/O error on device sdb1, logical block 32769
0:<4>lost page write due to I/O error on sdb1
0:<6>usb 1-2: new high speed USB device using ehci-xls and address 3
0:USB Device: 0x078155a5
0:USB Product: Cruzer Snap
0:USB Manufacturer: SanDisk
0:USB SerialNumber: 4C530000230822108383
0:<6>usb 1-2: c->desc.bMaxPower 100, udev->busmA 500
0:<6>usb 1-2: configuration #1 chosen from 1 choice
0:<6>scsi2 : SCSI emulation for USB Mass Storage devices
2:<7>usb-storage: device found at 3
2:<7>usb-storage: waiting for device to settle before scanning
2:<5>  Vendor: 2:S2:a2:n2:D2:i2:s2:k2: 2:  Model: 2:C2:r2:u2:z2:e2:r2: 2:S2:n2:a2:p2: 2: 2: 2: 2: 2:  Rev: 2:12:.2:02:02:
2:<5>  Type:   Direct-Access     2:                 ANSI SCSI revision: 062:
2:<5>SCSI device sdb: 30031872 512-byte hdwr sectors (15376 MB)
2:<5>sdb: Write Protect is off
2:<7>sdb: Mode Sense: 43 00 00 00
2:<3>sdb: assuming drive cache: write through
0:<5>SCSI device sdb: 30031872 512-byte hdwr sectors (15376 MB)
0:<5>sdb: Write Protect is off
0:<7>sdb: Mode Sense: 43 00 00 00
0:<3>sdb: assuming drive cache: write through
0:<6> sdb:0: sdb10:
0:<5>sd 2:0:0:0: Attached scsi removable disk sdb
0:<7>usb-storage: device scan complete
(ArubaS2500-48P) #copy flash: flash.tar.gz usb: flash.tar.gz
WARNING: This operation may take a few minutes depending upon network response and file size. Do you really want to continue (y/n)? y
No external USB drive detected 
(ArubaS2500-48P) #dir
show stora0:<3>VFS: Can't find ext3 filesystem on dev sdb.
0:VFS: Can't find an ext2 filesystem on dev sdb.
0:<3>FAT: invalid media value (0xf3)
0:<6>VFS: Can't find a valid FAT filesystem on dev sdb.
Filesystem                Size      Used Available Use% Mounted on
none                    300.0M      2.2M    297.8M   1% /tmp
/dev/ud3                755.6M     17.3M    699.9M   2% /flash
(ArubaS2500-48P) #show storage
Filesystem                Size      Used Available Use% Mounted on
none                    300.0M      2.2M    297.8M   1% /tmp
/dev/ud3                755.6M     17.3M    699.9M   2% /flash
(ArubaS2500-48P) #dir usb:
No external USB drive partition mounted. 
(ArubaS2500-48P) #dir usb:
show storage
Filesystem                Size      Used Available Use% Mounted on
none                    300.0M      2.2M    297.8M   1% /tmp
/dev/ud3                755.6M     17.3M    699.9M   2% /flash
(ArubaS2500-48P) #2:<3>VFS: Can't find ext3 filesystem on dev sdb1.
2:VFS: Can't find an ext2 filesystem on dev sdb1.
show storage
Filesystem                Size      Used Available Use% Mounted on
none                    300.0M      2.2M    297.8M   1% /tmp
/dev/ud3                755.6M     17.3M    699.9M   2% /flash
/dev/usbdisk/eud_p1      14.3G     38.1M     14.3G   0% /mnt/usbdisk/sdb1_p1
(ArubaS2500-48P) #show storage
dir usb:
show storage
copy flash: flash.tar.gz usb: flash.tar.gz
WARNING: This operation may take a few minutes depending upon network response and file size. Do you really want to continue (y/n)? y
....
File copied Successfully 
(ArubaS2500-48P) #0:BUTTON SHORT PRESS event triggered0:BUTTON SHORT PRESS event triggered0:BUTTON SHORT PRESS event triggered0:BUTTON SHORT PRESS event triggered0:BUTTON SHORT PRESS event triggered0:BUTTON SHORT PRESS event triggered0:BUTTON SHORT PRESS event triggered0:BUTTON SHORT PRESS event triggered0:BUTTON SHORT PRESS event triggered0:BUTTON SHORT PRESS event triggered0:BUTTON SHORT PRESS event triggered0:<6>usb 1-2: USB disconnect, address 3
(ArubaS2500-48P) #sync
                  ^
% Invalid input detected at '^' marker.
(ArubaS2500-48P) #!
(ArubaS2500-48P) >
(ArubaS2500-48P) >
(ArubaS2500-48P) >!
                  ^
% Invalid input detected at '^' marker.
(ArubaS2500-48P) >!
                  ^
% Invalid input detected at '^' marker.
(ArubaS2500-48P) >!
                  ^
% Invalid input detected at '^' marker.
(ArubaS2500-48P) >"
                  ^
% Invalid input detected at '^' marker.
(ArubaS2500-48P) >deactivat
                  ^
% Invalid input detected at '^' marker.
(ArubaS2500-48P) >
(ArubaS2500-48P) >
(ArubaS2500-48P) >deac