R2 Juniper baseline config

R2_baseline.cfg

## Last changed: 2016-11-06 18:41:14 UTC
version 14.1R1.10;
system {
    host-name R2;
    root-authentication {
        encrypted-password "****"; ## SECRET-DATA
    }
    syslog {
        user * {
            any emergency;
        }
        file messages {
            any notice;
            authorization info;
        }
        file interactive-commands {
            interactive-commands any;
        }
    }
}
interfaces {
    ge-0/0/0 {
        vlan-tagging;
        mac 50:01:00:02:00:02;          
        unit 12 {
            vlan-id 12;
            family inet {
                address 10.1.2.2/24;
            }
            family iso;
            family mpls;
        }
        unit 23 {
            vlan-id 23;
            family inet {
                address 10.2.3.2/24;
            }
            family iso;
        }
    }
    lo0 {
        unit 0 {
            family inet {
                address 2.2.2.2/32;
            }
            family iso {
                address 49.0001.0020.0200.2002.00;
            }
        }
    }
}
protocols {
    mpls {
        interface ge-0/0/0.12;
    }
    isis {
        reference-bandwidth 10g;
        level 1 disable;
        level 2 wide-metrics-only;
        interface ge-0/0/0.12 {
            point-to-point;
        }
        interface ge-0/0/0.23 {
            point-to-point;
        }
        interface lo0.0;
    }
    ldp {
        track-igp-metric;
        interface ge-0/0/0.12;
    }
}