Herman Ho hermanho

Enable & Using vGPU Passthrough

This gist is almost entirely not unlike Derek Seaman's awesome blog:

Proxmox VE 8: Windows 11 vGPU (VT-d) Passthrough with Intel Alder Lake

As such please refer to that for pictures, here i will capture the command lines I used as i sequence the commands a little differently so it makes more logic to me.

This gists assumes you are not running ZFS and are not passing any other PCIE devices (as both of these can require addtional steps - see Derek's blog for more info)

This gist assumes you are not running proxmox in UEFI Secure boot - if you are please refer entirely to dereks blog.

Note: This is all almost full YouTube ID informations. Original owner goes to AgentOak, modified version by Martin Eesmaa.

See the credits and also special thanks in below.

Last updated: November 2024

Also known as itag or format codes and way back they could be specified with the fmt parameter (e.g. &fmt=22). Depending on the age and/or popularity of the video, not all formats will be available.

DASH video

This is work in progress

I read about the .NET Generic Host for the first time in a Tweet of David Fowler. And I was hooked by the idea, it was just what I was looking for.

I like modules making things small but fit together like pieces of a puzzle, if possible being able to reuse them. I started refactoring Greenshot over a year ago, and was making modules out of the spaghetti code that it was. Trying to extract the modules into their own nuget packages, making them more generic and testable. I glued them together with some code I wrote, which is availble in Dapplo.Addons, but I knew that this was just a journey, until I found something that is a better with more potential.

I found the following description: _The purpose of Generic Host is to enable a wider array of host scenarios. Messaging, backg

	# If Debian 11 is ran on a LXC container (Proxmox), SSH login and sudo actions can be slow
	# Check if in /var/log/auth.log the following messages
	Failed to activate service 'org.freedesktop.login1': timed out (service_start_timeout=25000ms)

	-> Run systemctl mask systemd-logind
	-> Run pam-auth-update (and deselect Register user sessions in the systemd control group hierarchy)

	# We set an environment variable in this phase so it gets picked up by pip, but we don't want to bake secrets into our container image
	FROM python:3.6-alpine AS builder

	ARG INDEX_URL
	ENV PIP_EXTRA_INDEX_URL=$INDEX_URL

	COPY requirements.txt .

	RUN pip install -U pip \
	&& pip install --user -r requirements.txt

-#!/bin/sh
-# based on https://gist.github.com/ipedrazas/9c622404fb41f2343a0db85b3821275d
-# delete all evicted pods from all namespaces
-kubectl get pods --all-namespaces | grep Evicted | awk '{print $2 " --namespace=" $1}' | xargs kubectl delete pod
-# delete all containers in ImagePullBackOff state from all namespaces
-kubectl get pods --all-namespaces | grep 'ImagePullBackOff' | awk '{print $2 " --namespace=" $1}' | xargs kubectl delete pod
-# delete all containers in ImagePullBackOff or ErrImagePull or Evicted state from all namespaces

	[Unit]
	Description=greengrass daemon
	After=network.target

	[Service]
	ExecStart=/greengrass/ggc/core/greengrassd start
	Type=simple
	RestartSec=2
	Restart=always
	User=root

	// courtesy of Thamu Gurung @thamu_gurung_twitter
	browser.execute(() => {
	return $(elementSelector).trigger({ type: 'mousedown', which: 39 });
	});

	/* The Key codes
	rightArrow - 39
	leftArrow - 37
	down - 40
	enter - 13

Herman Ho hermanho

Enable & Using vGPU Passthrough

DASH video

Backend as a Service

Supabase - ~52K stars

Appwrite - ~32K stars