heyLu · December 21, 2011 15:18
diff --git a/dmesg.log b/dmesg.log
 [    0.000000] Initializing cgroup subsys cpuset
 [    0.000000] Initializing cgroup subsys cpu
 [    0.000000] Linux version 3.2.0-rc5+ (lu@papill0n) (gcc version 4.6.2 20111125 (prerelease) (GCC) ) #4 SMP Wed Dec 21 15:30:57 CET 2011
 [    0.000000] Command line: root=/dev/sda6 ro
 [    0.000000] Disabled fast string operations
 [    0.000000] BIOS-provided physical RAM map:
 [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 [    0.000000]  BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
 [    0.000000]  BIOS-e820: 0000000000100000 - 000000006ff90000 (usable)
 [    0.000000]  BIOS-e820: 000000006ff90000 - 000000006ff9e000 (ACPI data)
 [    0.000000]  BIOS-e820: 000000006ff9e000 - 000000006ffe0000 (ACPI NVS)
 [    0.000000]  BIOS-e820: 000000006ffe0000 - 0000000080000000 (reserved)
 [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 [    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
 [    0.000000] NX (Execute Disable) protection: active
 [    0.000000] DMI present.
 [    0.000000] DMI: ASUSTeK Computer INC. 1201N/1201N, BIOS 0326    04/29/2010
 [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
 [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
 [    0.000000] No AGP bridge found
 [    0.000000] last_pfn = 0x6ff90 max_arch_pfn = 0x400000000
 [    0.000000] MTRR default type: uncachable
 [    0.000000] MTRR fixed ranges enabled:
 [    0.000000]   00000-9FFFF write-back
 [    0.000000]   A0000-BFFFF uncachable
 [    0.000000]   C0000-CFFFF write-protect
 [    0.000000]   D0000-DFFFF uncachable
 [    0.000000]   E0000-EFFFF write-through
 [    0.000000]   F0000-FFFFF write-protect
 [    0.000000] MTRR variable ranges enabled:
 [    0.000000]   0 base 000000000 mask 080000000 write-back
 [    0.000000]   1 disabled
 [    0.000000]   2 disabled
 [    0.000000]   3 disabled
 [    0.000000]   4 disabled
 [    0.000000]   5 disabled
 [    0.000000]   6 disabled
 [    0.000000]   7 disabled
 [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
 [    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
 [    0.000000] initial memory mapped : 0 - 20000000
 [    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
 [    0.000000] init_memory_mapping: 0000000000000000-000000006ff90000
 [    0.000000]  0000000000 - 006fe00000 page 2M
 [    0.000000]  006fe00000 - 006ff90000 page 4k
 [    0.000000] kernel direct mapping tables up to 6ff90000 @ 1fffc000-20000000
 [    0.000000] RAMDISK: 37d95000 - 37ff0000
 [    0.000000] ACPI: RSDP 00000000000fbc60 00024 (v02 ACPIAM)
 [    0.000000] ACPI: XSDT 000000006ff90100 00074 (v01 _ASUS_ Notebook 20100429 MSFT 00000097)
 [    0.000000] ACPI: FACP 000000006ff90290 000F4 (v03 042910 FACP0928 20100429 MSFT 00000097)
 [    0.000000] ACPI: DSDT 000000006ff90500 0A58D (v01  A1469 A1469001 00000001 INTL 20051117)
 [    0.000000] ACPI: FACS 000000006ff9e000 00040
 [    0.000000] ACPI: APIC 000000006ff90390 00080 (v01 042910 APIC0928 20100429 MSFT 00000097)
 [    0.000000] ACPI: MCFG 000000006ff90410 0003C (v01 042910 OEMMCFG  20100429 MSFT 00000097)
 [    0.000000] ACPI: WDRT 000000006ff90450 00047 (v01 042910 NV-WDRT  20100429 MSFT 00000097)
 [    0.000000] ACPI: ECDT 000000006ff904a0 00055 (v01 042910 OEMECDT  20100429 MSFT 00000097)
 [    0.000000] ACPI: OEMB 000000006ff9e040 00079 (v01 042910 OEMB0928 20100429 MSFT 00000097)
 [    0.000000] ACPI: HPET 000000006ff9b500 00038 (v01 042910 OEMHPET0 20100429 MSFT 00000097)
 [    0.000000] ACPI: NVHD 000000006ff9e0c0 00284 (v01 042910  NVHDCP  20100429 MSFT 00000097)
 [    0.000000] ACPI: SSDT 000000006ff9e980 004F0 (v01  PmRef    CpuPm 00003000 INTL 20051117)
 [    0.000000] ACPI: SLIC 000000006ff9b540 00176 (v01 _ASUS_ Notebook 20100429 MSFT 00000097)
 [    0.000000] ACPI: Local APIC address 0xfee00000
 [    0.000000]  [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88006da00000-ffff88006f5fffff] on node 0
 [    0.000000] Zone PFN ranges:
 [    0.000000]   DMA      0x00000010 -> 0x00001000
 [    0.000000]   DMA32    0x00001000 -> 0x00100000
 [    0.000000]   Normal   empty
 [    0.000000] Movable zone start PFN for each node
 [    0.000000] early_node_map[2] active PFN ranges
 [    0.000000]     0: 0x00000010 -> 0x0000009f
 [    0.000000]     0: 0x00000100 -> 0x0006ff90
 [    0.000000] On node 0 totalpages: 458527
 [    0.000000]   DMA zone: 64 pages used for memmap
 [    0.000000]   DMA zone: 5 pages reserved
 [    0.000000]   DMA zone: 3914 pages, LIFO batch:0
 [    0.000000]   DMA32 zone: 7103 pages used for memmap
 [    0.000000]   DMA32 zone: 447441 pages, LIFO batch:31
 [    0.000000] ACPI: PM-Timer IO Port: 0x4008
 [    0.000000] ACPI: Local APIC address 0xfee00000
 [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
 [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
 [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
 [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
 [    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
 [    0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
 [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
 [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
 [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
 [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
 [    0.000000] ACPI: IRQ0 used by override.
 [    0.000000] ACPI: IRQ2 used by override.
 [    0.000000] ACPI: IRQ9 used by override.
 [    0.000000] ACPI: IRQ14 used by override.
 [    0.000000] ACPI: IRQ15 used by override.
 [    0.000000] Using ACPI (MADT) for SMP configuration information
 [    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
 [    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
 [    0.000000] nr_irqs_gsi: 40
 [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
 [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
 [    0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
 [    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
 [    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
 [    0.000000] PERCPU: Embedded 25 pages/cpu @ffff88006fc00000 s70272 r8192 d23936 u524288
 [    0.000000] pcpu-alloc: s70272 r8192 d23936 u524288 alloc=1*2097152
 [    0.000000] pcpu-alloc: [0] 0 1 2 3 
 [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 451355
 [    0.000000] Kernel command line: root=/dev/sda6 ro
 [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
 [    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
 [    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
 [    0.000000] Checking aperture...
 [    0.000000] No AGP bridge found
 [    0.000000] Memory: 1789304k/1834560k available (5524k kernel code, 452k absent, 44804k reserved, 3056k data, 480k init)
 [    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
 [    0.000000] Hierarchical RCU implementation.
 [    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
 [    0.000000] NR_IRQS:4352 nr_irqs:712 16
 [    0.000000] Extended CMOS year: 2000
 [    0.000000] spurious 8259A interrupt: IRQ7.
 [    0.000000] Console: colour VGA+ 80x25
 [    0.000000] console [tty0] enabled
 [    0.000000] allocated 14680064 bytes of page_cgroup
 [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
 [    0.000000] hpet clockevent registered
 [    0.000000] Fast TSC calibration using PIT
 [    0.000000] Detected 1599.969 MHz processor.
 [    0.001008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.93 BogoMIPS (lpj=1599969)
 [    0.001203] pid_max: default: 32768 minimum: 301
 [    0.002063] Mount-cache hash table entries: 256
 [    0.002445] Initializing cgroup subsys debug
 [    0.002548] Initializing cgroup subsys cpuacct
 [    0.002653] Initializing cgroup subsys memory
 [    0.002762] Initializing cgroup subsys devices
 [    0.002861] Initializing cgroup subsys freezer
 [    0.003032] Disabled fast string operations
 [    0.003136] CPU: Physical Processor ID: 0
 [    0.003232] CPU: Processor Core ID: 0
 [    0.003328] using mwait in idle threads.
 [    0.003455] ACPI: Core revision 20110623
 [    0.016599] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
 [    0.027215] CPU0: Intel(R) Atom(TM) CPU  330   @ 1.60GHz stepping 02
 [    0.027998] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
 [    0.027998] ... version:                3
 [    0.027998] ... bit width:              40
 [    0.027998] ... generic registers:      2
 [    0.027998] ... value mask:             000000ffffffffff
 [    0.027998] ... max period:             000000007fffffff
 [    0.027998] ... fixed-purpose events:   3
 [    0.027998] ... event mask:             0000000700000003
 [    0.028326] Booting Node   0, Processors  #1
 [    0.028431] smpboot cpu 1: start_ip = 9a000
 [    0.001999] Disabled fast string operations
 [    0.100170]  #2
 [    0.100317] smpboot cpu 2: start_ip = 9a000
 [    0.001999] Disabled fast string operations
 [    0.172208]  #3 Ok.
 [    0.172402] smpboot cpu 3: start_ip = 9a000
 [    0.001999] Disabled fast string operations
 [    0.244001] Brought up 4 CPUs
 [    0.244192] Total of 4 processors activated (12798.56 BogoMIPS).
 [    0.246175] devtmpfs: initialized
 [    0.246618] PM: Registering ACPI NVS region at 6ff9e000 (270336 bytes)
 [    0.247197] NET: Registered protocol family 16
 [    0.248101] ACPI: bus type pci registered
 [    0.248202] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff] (base 0xfc000000)
 [    0.248981] PCI: not using MMCONFIG
 [    0.249082] PCI: Using configuration type 1 for base access
 [    0.272023] bio: create slab <bio-0> at 0
 [    0.272253] ACPI: Added _OSI(Module Device)
 [    0.272253] ACPI: Added _OSI(Processor Device)
 [    0.272253] ACPI: Added _OSI(3.0 _SCP Extensions)
 [    0.272299] ACPI: Added _OSI(Processor Aggregator Device)
 [    0.276695] ACPI: EC: EC description table is found, configuring boot EC
 [    0.280686] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
 [    0.281497] ACPI: Executed 2 blocks of module-level executable AML code
 [    0.289766] ACPI: SSDT 000000006ff9e3e0 00594 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
 [    0.290845] ACPI: Dynamic OEM Table Load:
 [    0.291112] ACPI: SSDT           (null) 00594 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
 [    0.291888] ACPI: SSDT 000000006ff9e350 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20051117)
 [    0.293031] ACPI: Dynamic OEM Table Load:
 [    0.293228] ACPI: SSDT           (null) 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20051117)
 [    0.294204] ACPI: Interpreter enabled
 [    0.294310] ACPI: (supports S0 S3 S4 S5)
 [    0.294632] ACPI: Using IOAPIC for interrupt routing
 [    0.294790] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff] (base 0xfc000000)
 [    0.297356] PCI: MMCONFIG at [mem 0xfc000000-0xfdffffff] reserved in ACPI motherboard resources
 [    0.339143] ACPI: EC: GPE = 0x27, I/O: command/status = 0x66, data = 0x62
 [    0.340002] ACPI: No dock devices found.
 [    0.340112] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
 [    0.340917] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
 [    0.341502] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
 [    0.341609] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
 [    0.341967] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
 [    0.342112] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
 [    0.342257] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfbffffff]
 [    0.342402] pci_root PNP0A03:00: host bridge window [mem 0xfe000000-0xfebfffff]
 [    0.342576] pci 0000:00:00.0: [10de:0a82] type 0 class 0x000600
 [    0.342695] pci 0000:00:00.1: [10de:0a88] type 0 class 0x000500
 [    0.342860] pci 0000:00:03.0: [10de:0aae] type 0 class 0x000601
 [    0.342875] pci 0000:00:03.0: reg 10: [io  0x4f00-0x4fff]
 [    0.342983] pci 0000:00:03.1: [10de:0aa4] type 0 class 0x000500
 [    0.343089] pci 0000:00:03.2: [10de:0aa2] type 0 class 0x000c05
 [    0.343110] pci 0000:00:03.2: reg 10: [io  0x4900-0x493f]
 [    0.343140] pci 0000:00:03.2: reg 20: [io  0x4d00-0x4d3f]
 [    0.343152] pci 0000:00:03.2: reg 24: [io  0x4e00-0x4e3f]
 [    0.343187] pci 0000:00:03.2: PME# supported from D3hot D3cold
 [    0.343198] pci 0000:00:03.2: PME# disabled
 [    0.343225] pci 0000:00:03.3: [10de:0a89] type 0 class 0x000500
 [    0.343389] pci 0000:00:03.5: [10de:0aa3] type 0 class 0x000b40
 [    0.343414] pci 0000:00:03.5: reg 10: [mem 0xf9f80000-0xf9ffffff]
 [    0.343554] pci 0000:00:04.0: [10de:0aa5] type 0 class 0x000c03
 [    0.343572] pci 0000:00:04.0: reg 10: [mem 0xf9f7f000-0xf9f7ffff]
 [    0.343630] pci 0000:00:04.0: supports D1 D2
 [    0.343635] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
 [    0.343643] pci 0000:00:04.0: PME# disabled
 [    0.343666] pci 0000:00:04.1: [10de:0aa6] type 0 class 0x000c03
 [    0.343686] pci 0000:00:04.1: reg 10: [mem 0xf9f7ec00-0xf9f7ecff]
 [    0.343750] pci 0000:00:04.1: supports D1 D2
 [    0.343755] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
 [    0.343763] pci 0000:00:04.1: PME# disabled
 [    0.343795] pci 0000:00:06.0: [10de:0aa7] type 0 class 0x000c03
 [    0.343813] pci 0000:00:06.0: reg 10: [mem 0xf9f7d000-0xf9f7dfff]
 [    0.343871] pci 0000:00:06.0: supports D1 D2
 [    0.343876] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
 [    0.343883] pci 0000:00:06.0: PME# disabled
 [    0.343906] pci 0000:00:06.1: [10de:0aa9] type 0 class 0x000c03
 [    0.343926] pci 0000:00:06.1: reg 10: [mem 0xf9f7e800-0xf9f7e8ff]
 [    0.344001] pci 0000:00:06.1: supports D1 D2
 [    0.344006] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
 [    0.344017] pci 0000:00:06.1: PME# disabled
 [    0.344052] pci 0000:00:08.0: [10de:0ac0] type 0 class 0x000403
 [    0.344071] pci 0000:00:08.0: reg 10: [mem 0xf9f78000-0xf9f7bfff]
 [    0.344134] pci 0000:00:08.0: PME# supported from D3hot D3cold
 [    0.344141] pci 0000:00:08.0: PME# disabled
 [    0.344162] pci 0000:00:09.0: [10de:0aab] type 1 class 0x000604
 [    0.344235] pci 0000:00:0b.0: [10de:0ab5] type 0 class 0x000101
 [    0.344254] pci 0000:00:0b.0: reg 10: [io  0xb080-0xb087]
 [    0.344266] pci 0000:00:0b.0: reg 14: [io  0xb000-0xb003]
 [    0.344276] pci 0000:00:0b.0: reg 18: [io  0xac00-0xac07]
 [    0.344287] pci 0000:00:0b.0: reg 1c: [io  0xa880-0xa883]
 [    0.344298] pci 0000:00:0b.0: reg 20: [io  0xa800-0xa80f]
 [    0.344309] pci 0000:00:0b.0: reg 24: [mem 0xf9f76000-0xf9f77fff]
 [    0.344367] pci 0000:00:10.0: [10de:0aa0] type 1 class 0x000604
 [    0.344415] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
 [    0.344422] pci 0000:00:10.0: PME# disabled
 [    0.344491] pci 0000:00:16.0: [10de:0ac7] type 1 class 0x000604
 [    0.344676] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
 [    0.344687] pci 0000:00:16.0: PME# disabled
 [    0.344775] pci 0000:00:18.0: [10de:0ac7] type 1 class 0x000604
 [    0.344971] pci 0000:00:18.0: PME# supported from D0 D1 D2 D3hot D3cold
 [    0.344984] pci 0000:00:18.0: PME# disabled
 [    0.345101] pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode)
 [    0.345211] pci 0000:00:09.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
 [    0.345217] pci 0000:00:09.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
 [    0.345223] pci 0000:00:09.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
 [    0.345230] pci 0000:00:09.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
 [    0.345236] pci 0000:00:09.0:   bridge window [mem 0x80000000-0xfbffffff] (subtractive decode)
 [    0.345243] pci 0000:00:09.0:   bridge window [mem 0xfe000000-0xfebfffff] (subtractive decode)
 [    0.345293] pci 0000:05:00.0: [10de:0876] type 0 class 0x000300
 [    0.345316] pci 0000:05:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
 [    0.345334] pci 0000:05:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
 [    0.345351] pci 0000:05:00.0: reg 1c: [mem 0xf6000000-0xf7ffffff 64bit pref]
 [    0.345364] pci 0000:05:00.0: reg 24: [io  0xcc00-0xcc7f]
 [    0.345377] pci 0000:05:00.0: reg 30: [mem 0xfbde0000-0xfbdfffff pref]
 [    0.345447] pci 0000:00:10.0: PCI bridge to [bus 05-05]
 [    0.345550] pci 0000:00:10.0:   bridge window [io  0xc000-0xcfff]
 [    0.345557] pci 0000:00:10.0:   bridge window [mem 0xfa000000-0xfbdfffff]
 [    0.345566] pci 0000:00:10.0:   bridge window [mem 0xe0000000-0xf7ffffff 64bit pref]
 [    0.345737] pci 0000:07:00.0: [10ec:8171] type 0 class 0x000280
 [    0.345758] pci 0000:07:00.0: reg 10: [io  0xd800-0xd8ff]
 [    0.345773] pci 0000:07:00.0: reg 14: [mem 0xfbefc000-0xfbefffff]
 [    0.345858] pci 0000:07:00.0: supports D1 D2
 [    0.345863] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot
 [    0.345871] pci 0000:07:00.0: PME# disabled
 [    0.346989] pci 0000:00:16.0: PCI bridge to [bus 07-07]
 [    0.347106] pci 0000:00:16.0:   bridge window [io  0xd000-0xdfff]
 [    0.347119] pci 0000:00:16.0:   bridge window [mem 0xfbe00000-0xfbefffff]
 [    0.347307] pci 0000:09:00.0: [1969:1062] type 0 class 0x000200
 [    0.347334] pci 0000:09:00.0: reg 10: [mem 0xfbfc0000-0xfbffffff 64bit]
 [    0.347350] pci 0000:09:00.0: reg 18: [io  0xec00-0xec7f]
 [    0.347430] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
 [    0.347439] pci 0000:09:00.0: PME# disabled
 [    0.348988] pci 0000:00:18.0: PCI bridge to [bus 09-09]
 [    0.349105] pci 0000:00:18.0:   bridge window [io  0xe000-0xefff]
 [    0.349118] pci 0000:00:18.0:   bridge window [mem 0xfbf00000-0xfbffffff]
 [    0.349172] pci_bus 0000:00: on NUMA node 0
 [    0.349182] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
 [    0.349474] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
 [    0.349574] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
 [    0.349648] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
 [    0.350105]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0f)
 [    0.371273] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
 [    0.372370] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
 [    0.373182] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
 [    0.373923] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
 [    0.375233] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *0, disabled.
 [    0.376414] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
 [    0.377188] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
 [    0.377931] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
 [    0.378646] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
 [    0.379412] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
 [    0.380201] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
 [    0.380944] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
 [    0.381649] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0, disabled.
 [    0.382458] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
 [    0.383221] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
 [    0.383974] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
 [    0.384721] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *0, disabled.
 [    0.385460] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
 [    0.386240] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
 [    0.387001] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
 [    0.387763] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *11
 [    0.388458] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
 [    0.389236] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
 [    0.389995] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
 [    0.390742] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
 [    0.391457] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
 [    0.392234] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
 [    0.393020] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
 [    0.393772] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *9
 [    0.394458] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
 [    0.395231] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
 [    0.396000] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
 [    0.396757] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
 [    0.397463] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
 [    0.398188] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
 [    0.398935] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
 [    0.399601] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *11
 [    0.400321] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *9
 [    0.401079] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *15
 [    0.401782] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
 [    0.402500] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
 [    0.403236] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *9
 [    0.404015] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *15
 [    0.404719] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *10
 [    0.405417] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *11
 [    0.406171] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *9
 [    0.406882] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *15
 [    0.407576] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *14
 [    0.408332] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *7
 [    0.409076] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *10
 [    0.410074] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
 [    0.410135] vgaarb: loaded
 [    0.410230] vgaarb: bridge control possible 0000:05:00.0
 [    0.410974] SCSI subsystem initialized
 [    0.411122] libata version 3.00 loaded.
 [    0.411122] usbcore: registered new interface driver usbfs
 [    0.411967] usbcore: registered new interface driver hub
 [    0.412120] usbcore: registered new device driver usb
 [    0.415130] wmi: Mapper loaded
 [    0.415159] Advanced Linux Sound Architecture Driver Version 1.0.24.
 [    0.415159] PCI: Using ACPI for IRQ routing
 [    0.416902] PCI: pci_cache_line_size set to 64 bytes
 [    0.417051] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
 [    0.417060] reserve RAM buffer: 000000006ff90000 - 000000006fffffff 
 [    0.417974] cfg80211: Calling CRDA to update world regulatory domain
 [    0.418476] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
 [    0.419142] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
 [    0.420980] Switching to clocksource hpet
 [    0.421307] pnp: PnP ACPI init
 [    0.421307] ACPI: bus type pnp registered
 [    0.421807] pnp 00:00: [bus 00-ff]
 [    0.421815] pnp 00:00: [io  0x0cf8-0x0cff]
 [    0.421821] pnp 00:00: [io  0x0000-0x0cf7 window]
 [    0.421827] pnp 00:00: [io  0x0d00-0xffff window]
 [    0.421836] pnp 00:00: [mem 0x000a0000-0x000bffff window]
 [    0.421841] pnp 00:00: [mem 0x000d0000-0x000dffff window]
 [    0.421847] pnp 00:00: [mem 0x80000000-0xfbffffff window]
 [    0.421853] pnp 00:00: [mem 0xfe000000-0xfebfffff window]
 [    0.422209] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
 [    0.422310] pnp 00:01: [dma 4]
 [    0.422316] pnp 00:01: [io  0x0000-0x000f]
 [    0.422321] pnp 00:01: [io  0x0081-0x0083]
 [    0.422326] pnp 00:01: [io  0x0087]
 [    0.422330] pnp 00:01: [io  0x0089-0x008b]
 [    0.422335] pnp 00:01: [io  0x008f]
 [    0.422340] pnp 00:01: [io  0x00c0-0x00df]
 [    0.422525] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
 [    0.422623] pnp 00:02: [io  0x0060]
 [    0.422628] pnp 00:02: [io  0x0064]
 [    0.422649] pnp 00:02: [irq 1]
 [    0.422834] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
 [    0.422986] pnp 00:03: [irq 12]
 [    0.423206] pnp 00:03: Plug and Play ACPI device, IDs SYN0a13 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
 [    0.423239] pnp 00:04: [io  0x0061]
 [    0.423418] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
 [    0.423449] pnp 00:05: [io  0x00f0-0x00ff]
 [    0.423464] pnp 00:05: [irq 13]
 [    0.423636] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
 [    0.424572] pnp 00:06: [mem 0x000d0000-0x000d3fff window]
 [    0.424580] pnp 00:06: [mem 0x000d4000-0x000d7fff window]
 [    0.424586] pnp 00:06: [mem 0x000de000-0x000dffff window]
 [    0.424591] pnp 00:06: [io  0x0010-0x001f]
 [    0.424596] pnp 00:06: [io  0x0022-0x003f]
 [    0.424601] pnp 00:06: [io  0x0044-0x004d]
 [    0.424606] pnp 00:06: [io  0x0050-0x005f]
 [    0.424611] pnp 00:06: [io  0x0062-0x0063]
 [    0.424616] pnp 00:06: [io  0x0065-0x006f]
 [    0.424620] pnp 00:06: [io  0x0072-0x007f]
 [    0.424625] pnp 00:06: [io  0x0080]
 [    0.424630] pnp 00:06: [io  0x0084-0x0086]
 [    0.424634] pnp 00:06: [io  0x0088]
 [    0.424639] pnp 00:06: [io  0x008c-0x008e]
 [    0.424644] pnp 00:06: [io  0x0090-0x009f]
 [    0.424649] pnp 00:06: [io  0x00a2-0x00bf]
 [    0.424653] pnp 00:06: [io  0x00e0-0x00ef]
 [    0.424658] pnp 00:06: [io  0x04d0-0x04d1]
 [    0.424663] pnp 00:06: [io  0x0800-0x080f]
 [    0.424668] pnp 00:06: [io  0x4000-0x407f]
 [    0.424673] pnp 00:06: [io  0x4080-0x40ff]
 [    0.424678] pnp 00:06: [io  0x4400-0x447f]
 [    0.424683] pnp 00:06: [io  0x4480-0x44ff]
 [    0.424688] pnp 00:06: [io  0x4800-0x487f]
 [    0.424697] pnp 00:06: [io  0x4880-0x48ff]
 [    0.424702] pnp 00:06: [io  0x0380-0x0383]
 [    0.424707] pnp 00:06: [mem 0x00000000-0xffffffffffffffff disabled]
 [    0.424713] pnp 00:06: [mem 0xfefe2000-0xfefe3fff]
 [    0.424718] pnp 00:06: [mem 0xfefe1000-0xfefe1fff]
 [    0.424723] pnp 00:06: [mem 0xfee01000-0xfeefffff]
 [    0.425056] system 00:06: [io  0x04d0-0x04d1] has been reserved
 [    0.425164] system 00:06: [io  0x0800-0x080f] has been reserved
 [    0.425262] system 00:06: [io  0x4000-0x407f] has been reserved
 [    0.425363] system 00:06: [io  0x4080-0x40ff] has been reserved
 [    0.425464] system 00:06: [io  0x4400-0x447f] has been reserved
 [    0.425564] system 00:06: [io  0x4480-0x44ff] has been reserved
 [    0.425666] system 00:06: [io  0x4800-0x487f] has been reserved
 [    0.425766] system 00:06: [io  0x4880-0x48ff] has been reserved
 [    0.425864] system 00:06: [io  0x0380-0x0383] has been reserved
 [    0.425966] system 00:06: [mem 0x000d0000-0x000d3fff window] has been reserved
 [    0.426139] system 00:06: [mem 0x000d4000-0x000d7fff window] has been reserved
 [    0.426286] system 00:06: [mem 0x000de000-0x000dffff window] has been reserved
 [    0.426432] system 00:06: [mem 0xfefe2000-0xfefe3fff] has been reserved
 [    0.426532] system 00:06: [mem 0xfefe1000-0xfefe1fff] has been reserved
 [    0.426634] system 00:06: [mem 0xfee01000-0xfeefffff] has been reserved
 [    0.426740] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
 [    0.427072] pnp 00:07: [mem 0xfed00000-0xfed00fff]
 [    0.427080] pnp 00:07: [irq 2 disabled]
 [    0.427097] pnp 00:07: [irq 8]
 [    0.427306] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
 [    0.427382] pnp 00:08: [io  0x0070-0x0071]
 [    0.427565] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
 [    0.427810] pnp 00:09: [mem 0xfec00000-0xfec00fff]
 [    0.427817] pnp 00:09: [mem 0xfee00000-0xfee00fff]
 [    0.428081] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
 [    0.428189] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
 [    0.428293] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
 [    0.428460] pnp 00:0a: [mem 0xfc000000-0xfdffffff]
 [    0.428700] system 00:0a: [mem 0xfc000000-0xfdffffff] has been reserved
 [    0.428809] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
 [    0.429458] pnp 00:0b: [mem 0x00000000-0x0009ffff]
 [    0.429466] pnp 00:0b: [mem 0x000c0000-0x000cffff]
 [    0.429471] pnp 00:0b: [mem 0x000e0000-0x000fffff]
 [    0.429476] pnp 00:0b: [mem 0x00100000-0x7fffffff]
 [    0.429481] pnp 00:0b: [mem 0xfec00000-0xffffffff]
 [    0.429785] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
 [    0.429892] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
 [    0.429995] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
 [    0.430134] system 00:0b: [mem 0x00100000-0x7fffffff] could not be reserved
 [    0.430239] system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
 [    0.430344] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
 [    0.432409] pnp: PnP ACPI: found 12 devices
 [    0.432509] ACPI: ACPI bus type pnp unregistered
 [    0.453523] PCI: max bus depth: 1 pci_try_num: 2
 [    0.453598] pci 0000:00:09.0: PCI bridge to [bus 01-01]
 [    0.453711] pci 0000:00:10.0: PCI bridge to [bus 05-05]
 [    0.453813] pci 0000:00:10.0:   bridge window [io  0xc000-0xcfff]
 [    0.453915] pci 0000:00:10.0:   bridge window [mem 0xfa000000-0xfbdfffff]
 [    0.454044] pci 0000:00:10.0:   bridge window [mem 0xe0000000-0xf7ffffff 64bit pref]
 [    0.454192] pci 0000:00:16.0: PCI bridge to [bus 07-07]
 [    0.454295] pci 0000:00:16.0:   bridge window [io  0xd000-0xdfff]
 [    0.454404] pci 0000:00:16.0:   bridge window [mem 0xfbe00000-0xfbefffff]
 [    0.454522] pci 0000:00:18.0: PCI bridge to [bus 09-09]
 [    0.454625] pci 0000:00:18.0:   bridge window [io  0xe000-0xefff]
 [    0.454731] pci 0000:00:18.0:   bridge window [mem 0xfbf00000-0xfbffffff]
 [    0.454863] pci 0000:00:09.0: setting latency timer to 64
 [    0.454875] pci 0000:00:10.0: setting latency timer to 64
 [    0.455398] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 23
 [    0.455529] pci 0000:00:16.0: PCI INT A -> Link[LRP4] -> GSI 23 (level, low) -> IRQ 23
 [    0.455683] pci 0000:00:16.0: setting latency timer to 64
 [    0.456144] ACPI: PCI Interrupt Link [LRP6] enabled at IRQ 22
 [    0.456262] pci 0000:00:18.0: PCI INT A -> Link[LRP6] -> GSI 22 (level, low) -> IRQ 22
 [    0.456417] pci 0000:00:18.0: setting latency timer to 64
 [    0.456428] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
 [    0.456434] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
 [    0.456440] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
 [    0.456446] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
 [    0.456452] pci_bus 0000:00: resource 8 [mem 0x80000000-0xfbffffff]
 [    0.456458] pci_bus 0000:00: resource 9 [mem 0xfe000000-0xfebfffff]
 [    0.456465] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
 [    0.456470] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
 [    0.456476] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
 [    0.456482] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
 [    0.456488] pci_bus 0000:01: resource 8 [mem 0x80000000-0xfbffffff]
 [    0.456493] pci_bus 0000:01: resource 9 [mem 0xfe000000-0xfebfffff]
 [    0.456500] pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
 [    0.456505] pci_bus 0000:05: resource 1 [mem 0xfa000000-0xfbdfffff]
 [    0.456512] pci_bus 0000:05: resource 2 [mem 0xe0000000-0xf7ffffff 64bit pref]
 [    0.456518] pci_bus 0000:07: resource 0 [io  0xd000-0xdfff]
 [    0.456524] pci_bus 0000:07: resource 1 [mem 0xfbe00000-0xfbefffff]
 [    0.456530] pci_bus 0000:09: resource 0 [io  0xe000-0xefff]
 [    0.456535] pci_bus 0000:09: resource 1 [mem 0xfbf00000-0xfbffffff]
 [    0.456628] NET: Registered protocol family 2
 [    0.456849] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
 [    0.458114] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
 [    0.461549] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
 [    0.462477] TCP: Hash tables configured (established 262144 bind 65536)
 [    0.462586] TCP reno registered
 [    0.462693] UDP hash table entries: 1024 (order: 3, 32768 bytes)
 [    0.462818] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
 [    0.463204] NET: Registered protocol family 1
 [    0.624088] pci 0000:05:00.0: Boot video device
 [    0.624104] PCI: CLS 64 bytes, default 64
 [    0.624249] Trying to unpack rootfs image as initramfs...
 [    0.706575] Freeing initrd memory: 2412k freed
 [    0.713439] audit: initializing netlink socket (disabled)
 [    0.713567] type=2000 audit(1324479919.712:1): initialized
 [    0.722830] HugeTLB registered 2 MB page size, pre-allocated 0 pages
 [    0.739792] Btrfs loaded
 [    0.739912] msgmni has been set to 3499
 [    0.741714] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
 [    0.741865] io scheduler noop registered
 [    0.741962] io scheduler deadline registered
 [    0.742330] io scheduler cfq registered (default)
 [    0.743413] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
 [    0.743517] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
 [    0.744585] intel_idle: MWAIT substates: 0x10
 [    0.744613] intel_idle: v0.4 model 0x1C
 [    0.744617] intel_idle: lapic_timer_reliable_states 0x2
 [    0.745507] ACPI: AC Adapter [AC0] (on-line)
 [    0.746174] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
 [    0.750960] ACPI: Lid Switch [LID]
 [    0.751335] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
 [    0.751489] ACPI: Sleep Button [SLPB]
 [    0.751805] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
 [    0.751953] ACPI: Power Button [PWRB]
 [    0.752315] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
 [    0.752466] ACPI: Power Button [PWRF]
 [    0.770540] thermal LNXTHERM:00: registered as thermal_zone0
 [    0.770647] ACPI: Thermal Zone [TZ00] (81 C)
 [    0.771371] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
 [    0.831861] Non-volatile memory driver v1.3
 [    0.832128] [drm] Initialized drm 1.1.0 20060810
 [    0.840249] brd: module loaded
 [    0.844766] loop: module loaded
 [    0.845686] ahci 0000:00:0b.0: version 3.0
 [    0.846259] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
 [    0.846395] ahci 0000:00:0b.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
 [    0.846582] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP
 [    0.846865] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x1 impl IDE mode
 [    0.847051] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio sxs 
 [    0.847161] ahci 0000:00:0b.0: setting latency timer to 64
 [    0.850920] scsi0 : ahci
 [    0.851570] scsi1 : ahci
 [    0.852616] scsi2 : ahci
 [    0.853310] scsi3 : ahci
 [    0.853853] scsi4 : ahci
 [    0.854400] scsi5 : ahci
 [    0.855136] ata1: SATA max UDMA/133 abar m8192@0xf9f76000 port 0xf9f76100 irq 21
 [    0.855284] ata2: DUMMY
 [    0.855379] ata3: DUMMY
 [    0.855474] ata4: DUMMY
 [    0.855568] ata5: DUMMY
 [    0.855663] ata6: DUMMY
 [    0.857079] Initializing USB Mass Storage driver...
 [    0.857344] usbcore: registered new interface driver usb-storage
 [    0.857446] USB Mass Storage support registered.
 [    0.857698] usbcore: registered new interface driver libusual
 [    0.858192] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
 [    0.879400] ACPI: Battery Slot [BAT0] (battery present)
 [    0.890416] serio: i8042 KBD port at 0x60,0x64 irq 1
 [    0.890533] serio: i8042 AUX port at 0x60,0x64 irq 12
 [    0.891210] mousedev: PS/2 mouse device common for all mice
 [    0.892507] rtc_cmos 00:08: RTC can wake from S4
 [    0.893067] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
 [    0.893236] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
 [    0.894579] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
 [    0.895907] cpuidle: using governor ladder
 [    0.897899] cpuidle: using governor menu
 [    0.901217] usbcore: registered new interface driver usbhid
 [    0.901322] usbhid: USB HID core driver
 [    0.901421] asus_wmi: ASUS WMI generic driver loaded
 [    0.902621] asus_wmi: Initialization: 0x0
 [    0.902838] asus_wmi: BIOS WMI version: 0.7
 [    0.903165] asus_wmi: SFUN value: 0x0
 [    0.915269] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
 [    0.930721] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input5
 [    1.160049] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
 [    1.161006] ata1.00: ATA-8: Hitachi HTS545025B9A300, PB2OC60N, max UDMA/133
 [    1.161142] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
 [    1.162231] ata1.00: configured for UDMA/133
 [    1.162635] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54502 PB2O PQ: 0 ANSI: 5
 [    1.163551] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
 [    1.163926] sd 0:0:0:0: Attached scsi generic sg0 type 0
 [    1.163943] sd 0:0:0:0: [sda] Write Protect is off
 [    1.163950] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
 [    1.164070] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 [    1.207845]  sda: sda1 sda2 < sda5 sda6 sda7 >
 [    1.209756] sd 0:0:0:0: [sda] Attached SCSI disk
 [    1.710129] Refined TSC clocksource calibration: 1599.992 MHz.
 [    1.710239] Switching to clocksource tsc
 [    2.024613] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
 [    2.097247] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
 [    3.075886] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0
 [    3.076003] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0
 [    3.076596] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
 [    3.076728] snd_hda_intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 20 (level, low) -> IRQ 20
 [    3.076874] hda_intel: Disabling MSI
 [    3.077055] snd_hda_intel 0000:00:08.0: setting latency timer to 64
 [    3.529798] ALSA device list:
 [    3.529902]   #0: HDA NVidia at 0xf9f78000 irq 20
 [    3.530287] Netfilter messages via NETLINK v0.30.
 [    3.530425] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
 [    3.531224] ctnetlink v0.93: registering with nfnetlink.
 [    3.532151] ip_tables: (C) 2000-2006 Netfilter Core Team
 [    3.532351] TCP cubic registered
 [    3.532448] Initializing XFRM netlink socket
 [    3.533422] NET: Registered protocol family 10
 [    3.534974] ip6_tables: (C) 2000-2006 Netfilter Core Team
 [    3.535217] IPv6 over IPv4 tunneling driver
 [    3.536806] NET: Registered protocol family 17
 [    3.536965] NET: Registered protocol family 33
 [    3.542294] RxRPC: Registered security type 2 'rxkad'
 [    3.543097] registered taskstats version 1
 [    3.543802] console [netcon0] enabled
 [    3.543902] netconsole: network logging started
 [    3.546677] Freeing unused kernel memory: 480k freed
 [    3.547081] Write protecting the kernel read-only data: 8192k
 [    3.552971] Freeing unused kernel memory: 600k freed
 [    3.557408] Freeing unused kernel memory: 404k freed
 [    3.582492] udevd[985]: starting version 175
 [    4.414145] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
 [    5.690383] udevd[1736]: starting version 175
 [    6.392191] ACPI: PCI Interrupt Link [LN6A] enabled at IRQ 19
 [    6.392442] atl1c 0000:09:00.0: PCI INT A -> Link[LN6A] -> GSI 19 (level, low) -> IRQ 19
 [    6.392652] atl1c 0000:09:00.0: setting latency timer to 64
 [    6.396335] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 [    6.396475] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
 [    6.397447] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
 [    6.397596] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
 [    6.397856] ehci_hcd 0000:00:04.1: setting latency timer to 64
 [    6.397869] ehci_hcd 0000:00:04.1: EHCI Host Controller
 [    6.400223] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
 [    6.400444] ehci_hcd 0000:00:04.1: reset hcs_params 0x101c83 dbg=1 cc=1 pcc=12 !ppc ports=3
 [    6.400458] ehci_hcd 0000:00:04.1: reset portroute 0 0 0 
 [    6.400466] ehci_hcd 0000:00:04.1: reset hcc_params a086 caching frame 256/512/1024 park
 [    6.400512] ehci_hcd 0000:00:04.1: park 0
 [    6.400530] ehci_hcd 0000:00:04.1: debug port 1
 [    6.400662] ehci_hcd 0000:00:04.1: reset command 0080b02  park=3 ithresh=8 period=1024 Reset HALT
 [    6.400685] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
 [    6.400694] ehci_hcd 0000:00:04.1: supports USB remote wakeup
 [    6.400759] ehci_hcd 0000:00:04.1: irq 23, io mem 0xf9f7ec00
 [    6.400887] ehci_hcd 0000:00:04.1: reset command 0080b02  park=3 ithresh=8 period=1024 Reset HALT
 [    6.400902] ehci_hcd 0000:00:04.1: init command 0010005 (park)=0 ithresh=1 period=512 RUN
 [    6.406672] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
 [    6.406900] usb usb1: default language 0x0409
 [    6.406928] usb usb1: udev 1, busnum 1, minor = 0
 [    6.406936] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
 [    6.407084] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
 [    6.407252] usb usb1: Product: EHCI Host Controller
 [    6.407373] usb usb1: Manufacturer: Linux 3.2.0-rc5+ ehci_hcd
 [    6.407490] usb usb1: SerialNumber: 0000:00:04.1
 [    6.411216] usb usb1: usb_probe_device
 [    6.411233] usb usb1: configuration #1 chosen from 1 choice
 [    6.411276] usb usb1: adding 1-0:1.0 (config #1, interface 0)
 [    6.412783] hub 1-0:1.0: usb_probe_interface
 [    6.412796] hub 1-0:1.0: usb_probe_interface - got id
 [    6.412811] hub 1-0:1.0: USB hub found
 [    6.412956] hub 1-0:1.0: 3 ports detected
 [    6.413101] hub 1-0:1.0: standalone hub
 [    6.413109] hub 1-0:1.0: no power switching (usb 1.0)
 [    6.413117] hub 1-0:1.0: individual port over-current protection
 [    6.413125] hub 1-0:1.0: power on to power good time: 20ms
 [    6.413146] hub 1-0:1.0: local power source is good
 [    6.413156] hub 1-0:1.0: trying to enable port power on non-switchable hub
 [    6.414318] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 22
 [    6.414470] ehci_hcd 0000:00:06.1: PCI INT B -> Link[UB12] -> GSI 22 (level, low) -> IRQ 22
 [    6.414703] ehci_hcd 0000:00:06.1: setting latency timer to 64
 [    6.414718] ehci_hcd 0000:00:06.1: EHCI Host Controller
 [    6.417544] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
 [    6.417739] ehci_hcd 0000:00:06.1: reset hcs_params 0x101c86 dbg=1 cc=1 pcc=12 !ppc ports=6
 [    6.417755] ehci_hcd 0000:00:06.1: reset portroute 0 0 0 0 0 0 
 [    6.417764] ehci_hcd 0000:00:06.1: reset hcc_params a086 caching frame 256/512/1024 park
 [    6.417805] ehci_hcd 0000:00:06.1: park 0
 [    6.417824] ehci_hcd 0000:00:06.1: debug port 1
 [    6.417949] ehci_hcd 0000:00:06.1: reset command 0080b02  park=3 ithresh=8 period=1024 Reset HALT
 [    6.417965] ehci_hcd 0000:00:06.1: cache line size of 64 is not supported
 [    6.417972] ehci_hcd 0000:00:06.1: supports USB remote wakeup
 [    6.418110] ehci_hcd 0000:00:06.1: irq 22, io mem 0xf9f7e800
 [    6.418241] ehci_hcd 0000:00:06.1: reset command 0080b02  park=3 ithresh=8 period=1024 Reset HALT
 [    6.418259] ehci_hcd 0000:00:06.1: init command 0010005 (park)=0 ithresh=1 period=512 RUN
 [    6.424074] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
 [    6.424301] usb usb2: default language 0x0409
 [    6.424321] usb usb2: udev 1, busnum 2, minor = 128
 [    6.424328] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
 [    6.424444] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
 [    6.424604] usb usb2: Product: EHCI Host Controller
 [    6.424718] usb usb2: Manufacturer: Linux 3.2.0-rc5+ ehci_hcd
 [    6.424841] usb usb2: SerialNumber: 0000:00:06.1
 [    6.427227] usb usb2: usb_probe_device
 [    6.427244] usb usb2: configuration #1 chosen from 1 choice
 [    6.427289] usb usb2: adding 2-0:1.0 (config #1, interface 0)
 [    6.427593] hub 2-0:1.0: usb_probe_interface
 [    6.427602] hub 2-0:1.0: usb_probe_interface - got id
 [    6.427613] hub 2-0:1.0: USB hub found
 [    6.427746] hub 2-0:1.0: 6 ports detected
 [    6.427860] hub 2-0:1.0: standalone hub
 [    6.427867] hub 2-0:1.0: no power switching (usb 1.0)
 [    6.427873] hub 2-0:1.0: individual port over-current protection
 [    6.427881] hub 2-0:1.0: power on to power good time: 20ms
 [    6.427899] hub 2-0:1.0: local power source is good
 [    6.427907] hub 2-0:1.0: trying to enable port power on non-switchable hub
 [    6.450382] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
 [    6.450505] ohci_hcd: block sizes: ed 80 td 96
 [    6.451228] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21
 [    6.451343] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 21 (level, low) -> IRQ 21
 [    6.451528] ohci_hcd 0000:00:04.0: setting latency timer to 64
 [    6.451535] ohci_hcd 0000:00:04.0: OHCI Host Controller
 [    6.451929] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
 [    6.452117] ohci_hcd 0000:00:04.0: created debug files
 [    6.452122] ohci_hcd 0000:00:04.0: supports USB remote wakeup
 [    6.452143] ohci_hcd 0000:00:04.0: irq 21, io mem 0xf9f7f000
 [    6.465084] atl1c 0000:09:00.0: version 1.0.1.0-NAPI
 [    6.507622] ohci_hcd 0000:00:04.0: OHCI controller state
 [    6.507638] ohci_hcd 0000:00:04.0: OHCI 1.0, NO legacy support registers
 [    6.507649] ohci_hcd 0000:00:04.0: control 0x683 RWE RWC HCFS=operational CBSR=3
 [    6.507659] ohci_hcd 0000:00:04.0: cmdstatus 0x00000 SOC=0
 [    6.507669] ohci_hcd 0000:00:04.0: intrstatus 0x00000004 SF
 [    6.507678] ohci_hcd 0000:00:04.0: intrenable 0x8000005a MIE RHSC UE RD WDH
 [    6.507690] ohci_hcd 0000:00:04.0: hcca frame #0003
 [    6.507700] ohci_hcd 0000:00:04.0: roothub.a 01001203 POTPGT=1 NOCP NPS NDP=3(3)
 [    6.507710] ohci_hcd 0000:00:04.0: roothub.b 00000000 PPCM=0000 DR=0000
 [    6.507720] ohci_hcd 0000:00:04.0: roothub.status 00008000 DRWE
 [    6.507730] ohci_hcd 0000:00:04.0: roothub.portstatus [0] 0x00000100 PPS
 [    6.507740] ohci_hcd 0000:00:04.0: roothub.portstatus [1] 0x00000100 PPS
 [    6.507751] ohci_hcd 0000:00:04.0: roothub.portstatus [2] 0x00000100 PPS
 [    6.507813] usb usb3: default language 0x0409
 [    6.507838] usb usb3: udev 1, busnum 3, minor = 256
 [    6.507846] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
 [    6.507974] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
 [    6.508174] usb usb3: Product: OHCI Host Controller
 [    6.508293] usb usb3: Manufacturer: Linux 3.2.0-rc5+ ohci_hcd
 [    6.508412] usb usb3: SerialNumber: 0000:00:04.0
 [    6.514220] ehci_hcd 0000:00:04.1: GetStatus port:1 status 001803 0  ACK POWER sig=j CSC CONNECT
 [    6.514244] hub 1-0:1.0: port 1: status 0501 change 0001
 [    6.514275] ehci_hcd 0000:00:04.1: GetStatus port:3 status 001803 0  ACK POWER sig=j CSC CONNECT
 [    6.514297] hub 1-0:1.0: port 3: status 0501 change 0001
 [    6.516722] usb usb3: usb_probe_device
 [    6.516738] usb usb3: configuration #1 chosen from 1 choice
 [    6.516781] usb usb3: adding 3-0:1.0 (config #1, interface 0)
 [    6.517634] hub 3-0:1.0: usb_probe_interface
 [    6.517645] hub 3-0:1.0: usb_probe_interface - got id
 [    6.517658] hub 3-0:1.0: USB hub found
 [    6.517794] hub 3-0:1.0: 3 ports detected
 [    6.517904] hub 3-0:1.0: standalone hub
 [    6.517912] hub 3-0:1.0: no power switching (usb 1.0)
 [    6.517919] hub 3-0:1.0: no over-current protection
 [    6.517927] hub 3-0:1.0: power on to power good time: 2ms
 [    6.517948] hub 3-0:1.0: local power source is good
 [    6.517958] hub 3-0:1.0: trying to enable port power on non-switchable hub
 [    6.518177] ehci_hcd 0000:00:04.1: HS companion for 0000:00:04.0
 [    6.518750] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 20
 [    6.518863] ohci_hcd 0000:00:06.0: PCI INT A -> Link[UB11] -> GSI 20 (level, low) -> IRQ 20
 [    6.519073] ohci_hcd 0000:00:06.0: setting latency timer to 64
 [    6.519081] ohci_hcd 0000:00:06.0: OHCI Host Controller
 [    6.519513] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
 [    6.520509] ohci_hcd 0000:00:06.0: created debug files
 [    6.520520] ohci_hcd 0000:00:06.0: supports USB remote wakeup
 [    6.520549] ohci_hcd 0000:00:06.0: irq 20, io mem 0xf9f7d000
 [    6.527055] ehci_hcd 0000:00:06.1: GetStatus port:3 status 001803 0  ACK POWER sig=j CSC CONNECT
 [    6.527065] hub 2-0:1.0: port 3: status 0501 change 0001
 [    6.549051] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 18
 [    6.549193] rtl8192se 0000:07:00.0: PCI INT A -> Link[LN4A] -> GSI 18 (level, low) -> IRQ 18
 [    6.549346] rtl8192se 0000:07:00.0: setting latency timer to 64
 [    6.561844] rtl8192se: rtl8192ce: FW Power Save off (module option)
 [    6.562153] rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE
 [    6.562158] Loading firmware rtlwifi/rtl8192sefw.bin
 [    6.573043] ohci_hcd 0000:00:06.0: OHCI controller state
 [    6.573053] ohci_hcd 0000:00:06.0: OHCI 1.0, NO legacy support registers
 [    6.573062] ohci_hcd 0000:00:06.0: control 0x683 RWE RWC HCFS=operational CBSR=3
 [    6.573069] ohci_hcd 0000:00:06.0: cmdstatus 0x00000 SOC=0
 [    6.573076] ohci_hcd 0000:00:06.0: intrstatus 0x00000004 SF
 [    6.573082] ohci_hcd 0000:00:06.0: intrenable 0x8000005a MIE RHSC UE RD WDH
 [    6.573091] ohci_hcd 0000:00:06.0: hcca frame #0003
 [    6.573098] ohci_hcd 0000:00:06.0: roothub.a 01001206 POTPGT=1 NOCP NPS NDP=6(6)
 [    6.573105] ohci_hcd 0000:00:06.0: roothub.b 00000000 PPCM=0000 DR=0000
 [    6.573112] ohci_hcd 0000:00:06.0: roothub.status 00008000 DRWE
 [    6.573119] ohci_hcd 0000:00:06.0: roothub.portstatus [0] 0x00000100 PPS
 [    6.573126] ohci_hcd 0000:00:06.0: roothub.portstatus [1] 0x00000100 PPS
 [    6.573134] ohci_hcd 0000:00:06.0: roothub.portstatus [2] 0x00000100 PPS
 [    6.573141] ohci_hcd 0000:00:06.0: roothub.portstatus [3] 0x00000100 PPS
 [    6.573148] ohci_hcd 0000:00:06.0: roothub.portstatus [4] 0x00000100 PPS
 [    6.573156] ohci_hcd 0000:00:06.0: roothub.portstatus [5] 0x00000100 PPS
 [    6.573193] usb usb4: default language 0x0409
 [    6.573209] usb usb4: udev 1, busnum 4, minor = 384
 [    6.573214] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
 [    6.573321] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
 [    6.573469] usb usb4: Product: OHCI Host Controller
 [    6.573574] usb usb4: Manufacturer: Linux 3.2.0-rc5+ ohci_hcd
 [    6.573679] usb usb4: SerialNumber: 0000:00:06.0
 [    6.574220] usb usb4: usb_probe_device
 [    6.574234] usb usb4: configuration #1 chosen from 1 choice
 [    6.574264] usb usb4: adding 4-0:1.0 (config #1, interface 0)
 [    6.574487] hub 4-0:1.0: usb_probe_interface
 [    6.574497] hub 4-0:1.0: usb_probe_interface - got id
 [    6.574509] hub 4-0:1.0: USB hub found
 [    6.574651] hub 4-0:1.0: 6 ports detected
 [    6.574768] hub 4-0:1.0: standalone hub
 [    6.574775] hub 4-0:1.0: no power switching (usb 1.0)
 [    6.574782] hub 4-0:1.0: no over-current protection
 [    6.574789] hub 4-0:1.0: power on to power good time: 2ms
 [    6.574809] hub 4-0:1.0: local power source is good
 [    6.574820] hub 4-0:1.0: trying to enable port power on non-switchable hub
 [    6.575062] ehci_hcd 0000:00:06.1: HS companion for 0000:00:06.0
 [    6.603198] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 23
 [    6.603315] nouveau 0000:05:00.0: PCI INT A -> Link[SGRU] -> GSI 23 (level, low) -> IRQ 23
 [    6.603468] nouveau 0000:05:00.0: setting latency timer to 64
 [    6.606210] [drm] nouveau 0000:05:00.0: Detected an NV50 generation card (0x0acb00b1)
 [    6.613442] [drm] nouveau 0000:05:00.0: Attempting to load BIOS image from PRAMIN
 [    6.614068] hub 1-0:1.0: state 7 ports 3 chg 000a evt 0000
 [    6.614099] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
 [    6.665049] ehci_hcd 0000:00:04.1: port 1 full speed --> companion
 [    6.665065] ehci_hcd 0000:00:04.1: GetStatus port:1 status 003001 0  ACK POWER OWNER sig=se0 CONNECT
 [    6.665080] hub 1-0:1.0: port 1 not reset yet, waiting 50ms
 [    6.683322] [drm] nouveau 0000:05:00.0: ... appears to be valid
 [    6.683435] [drm] nouveau 0000:05:00.0: BIT BIOS found
 [    6.683536] [drm] nouveau 0000:05:00.0: Bios version 62.79.67.00
 [    6.683639] [drm] nouveau 0000:05:00.0: TMDS table version 2.0
 [    6.686042] [drm] nouveau 0000:05:00.0: MXM: no VBIOS data, nothing to do
 [    6.686150] [drm] nouveau 0000:05:00.0: DCB version 4.0
 [    6.686252] [drm] nouveau 0000:05:00.0: DCB outp 00: 01000323 00010034
 [    6.686353] [drm] nouveau 0000:05:00.0: DCB outp 01: 02011300 0000001e
 [    6.686454] [drm] nouveau 0000:05:00.0: DCB outp 02: 02022332 00020010
 [    6.686554] [drm] nouveau 0000:05:00.0: DCB conn 00: 00000040
 [    6.686701] [drm] nouveau 0000:05:00.0: DCB conn 01: 00000100
 [    6.686847] [drm] nouveau 0000:05:00.0: DCB conn 02: 00001261
 [    6.686997] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 0 at offset 0xDEFA
 [    6.716309] ehci_hcd 0000:00:04.1: GetStatus port:1 status 003802 0  ACK POWER OWNER sig=j CSC
 [    6.716360] hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
 [    6.767254] ehci_hcd 0000:00:04.1: port 3 high speed
 [    6.767271] ehci_hcd 0000:00:04.1: GetStatus port:3 status 001005 0  ACK POWER sig=se0 PE CONNECT
 [    6.772399] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 1 at offset 0xE1D2
 [    6.772552] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 2 at offset 0xE1D4
 [    6.772701] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 3 at offset 0xE295
 [    6.772855] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 4 at offset 0xE35A
 [    6.773000] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table at offset 0xE3BF
 [    6.793167] [drm] nouveau 0000:05:00.0: 0xE3BF: Condition still not met after 20ms, skipping following opcodes
 [    6.821608] usb 1-3: new high-speed USB device number 3 using ehci_hcd
 [    6.840477] [drm] nouveau 0000:05:00.0: 4 available performance level(s)
 [    6.840591] [drm] nouveau 0000:05:00.0: 0: core 200MHz shader 400MHz voltage 900mV fanspeed 60%
 [    6.840746] [drm] nouveau 0000:05:00.0: 1: core 300MHz shader 600MHz voltage 900mV fanspeed 100%
 [    6.840898] [drm] nouveau 0000:05:00.0: 2: core 350MHz shader 800MHz voltage 900mV fanspeed 100%
 [    6.841064] [drm] nouveau 0000:05:00.0: 3: core 450MHz shader 1100MHz voltage 1010mV fanspeed 100%
 [    6.841222] [drm] nouveau 0000:05:00.0: c:
 [    6.845163] [TTM] Zone  kernel: Available graphics memory: 896600 kiB.
 [    6.845269] [TTM] Initializing pool allocator.
 [    6.845394] [drm] nouveau 0000:05:00.0: Detected 256MiB VRAM (DDR1)
 [    6.845495] [drm] nouveau 0000:05:00.0: Stolen system memory at: 0x0070000000
 [    6.846147] [drm] nouveau 0000:05:00.0: 64 MiB GART (aperture)
 [    6.872298] ehci_hcd 0000:00:04.1: port 3 high speed
 [    6.872313] ehci_hcd 0000:00:04.1: GetStatus port:3 status 001005 0  ACK POWER sig=se0 PE CONNECT
 [    6.874385] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
 [    6.874496] [drm] No driver support for vblank timestamp query.
 [    6.939062] usb 1-3: skipped 1 descriptor after configuration
 [    6.939070] usb 1-3: skipped 5 descriptors after interface
 [    6.939077] usb 1-3: skipped 1 descriptor after endpoint
 [    6.939083] usb 1-3: skipped 14 descriptors after interface
 [    6.939300] usb 1-3: default language 0x0409
 [    6.940054] usb 1-3: udev 3, busnum 1, minor = 2
 [    6.940060] usb 1-3: New USB device found, idVendor=13d3, idProduct=5126
 [    6.940200] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=2
 [    6.940335] usb 1-3: Product: USB 2.0 PC Cam
 [    6.940466] usb 1-3: Manufacturer: Image Processor
 [    6.940596] usb 1-3: SerialNumber: USB 2.0 PC Cam
 [    6.941152] usb 1-3: usb_probe_device
 [    6.941164] usb 1-3: configuration #1 chosen from 1 choice
 [    6.941473] usb 1-3: adding 1-3:1.0 (config #1, interface 0)
 [    6.941823] usb 1-3: adding 1-3:1.1 (config #1, interface 1)
 [    6.942177] hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0002
 [    6.942205] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
 [    6.942227] hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
 [    7.020823] Linux video capture interface: v2.00
 [    7.046050] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
 [    7.152045] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
 [    7.203039] usb 3-1: new full-speed USB device number 2 using ohci_hcd
 [    7.311036] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
 [    7.376027] usb 3-1: ep0 maxpacket = 8
 [    7.392633] usb 3-1: skipped 1 descriptor after interface
 [    7.392640] usb 3-1: skipped 1 descriptor after interface
 [    7.395630] usb 3-1: default language 0x0409
 [    7.401632] usb 3-1: udev 2, busnum 3, minor = 257
 [    7.401639] usb 3-1: New USB device found, idVendor=046d, idProduct=c52f
 [    7.401774] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
 [    7.401909] usb 3-1: Product: USB Receiver
 [    7.402049] usb 3-1: Manufacturer: Logitech
 [    7.402592] usb 3-1: usb_probe_device
 [    7.402604] usb 3-1: configuration #1 chosen from 1 choice
 [    7.407637] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
 [    7.407910] usbhid 3-1:1.0: usb_probe_interface
 [    7.407922] usbhid 3-1:1.0: usb_probe_interface - got id
 [    7.414189] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.0/usb3/3-1/3-1:1.0/input/input7
 [    7.415092] generic-usb 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:04.0-1/input0
 [    7.415350] usb 3-1: adding 3-1:1.1 (config #1, interface 1)
 [    7.415567] usbhid 3-1:1.1: usb_probe_interface
 [    7.415576] usbhid 3-1:1.1: usb_probe_interface - got id
 [    7.426057] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.0/usb3/3-1/3-1:1.1/input/input8
 [    7.426727] usbhid 3-1:1.1: looking for a minor, starting at 96
 [    7.427351] generic-usb 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.0-1/input1
 [    7.427684] hub 2-0:1.0: state 7 ports 6 chg 0008 evt 0000
 [    7.427713] hub 2-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
 [    7.478051] ehci_hcd 0000:00:06.1: port 3 full speed --> companion
 [    7.478065] ehci_hcd 0000:00:06.1: GetStatus port:3 status 003001 0  ACK POWER OWNER sig=se0 CONNECT
 [    7.478131] hub 2-0:1.0: port 3 not reset yet, waiting 50ms
 [    7.529054] ehci_hcd 0000:00:06.1: GetStatus port:3 status 003802 0  ACK POWER OWNER sig=j CSC
 [    7.529097] hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0002
 [    7.529114] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0008
 [    7.529127] ohci_hcd 0000:00:06.0: GetStatus roothub.portstatus [2] = 0x00010101 CSC PPS CCS
 [    7.529137] hub 4-0:1.0: port 3, status 0101, change 0001, 12 Mb/s
 [    7.633035] hub 4-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x101
 [    7.739036] ohci_hcd 0000:00:06.0: GetStatus roothub.portstatus [2] = 0x00100103 PRSC PPS PES CCS
 [    7.790035] usb 4-3: new full-speed USB device number 2 using ohci_hcd
 [    7.898034] ohci_hcd 0000:00:06.0: GetStatus roothub.portstatus [2] = 0x00100103 PRSC PPS PES CCS
 [    7.980078] usb 4-3: skipped 1 descriptor after interface
 [    7.983058] usb 4-3: default language 0x0409
 [    7.992060] usb 4-3: udev 2, busnum 4, minor = 385
 [    7.992068] usb 4-3: New USB device found, idVendor=0b05, idProduct=1788
 [    7.992187] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
 [    7.992299] usb 4-3: Product: BT-270
 [    7.992405] usb 4-3: Manufacturer: Broadcom Corp
 [    7.992510] usb 4-3: SerialNumber: 1C4BD60611A4
 [    7.993033] usb 4-3: usb_probe_device
 [    7.993046] usb 4-3: configuration #1 chosen from 1 choice
 [    7.995130] usb 4-3: adding 4-3:1.0 (config #1, interface 0)
 [    7.995463] usb 4-3: adding 4-3:1.1 (config #1, interface 1)
 [    7.995724] usb 4-3: adding 4-3:1.2 (config #1, interface 2)
 [    7.995987] usb 4-3: adding 4-3:1.3 (config #1, interface 3)
 [    7.996255] hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0002
 [    7.996281] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0008
 [    7.996307] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0008
 [    8.109348] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
 [    8.113379] uvcvideo 1-3:1.0: usb_probe_interface
 [    8.113393] uvcvideo 1-3:1.0: usb_probe_interface - got id
 [    8.113441] uvcvideo: Found UVC 1.00 device USB 2.0 PC Cam (13d3:5126)
 [    8.114363] [drm] nouveau 0000:05:00.0: allocated 1366x768 fb: 0x2f0000, bo ffff88006b4f5c00
 [    8.114980] fbcon: nouveaufb (fb0) is primary device
 [    8.117775] input: USB 2.0 PC Cam as /devices/pci0000:00/0000:00:04.1/usb1/1-3/1-3:1.0/input/input9
 [    8.127448] usbcore: registered new interface driver uvcvideo
 [    8.127457] USB Video Class driver (1.1.1)
 [    8.386655] Console: switching to colour frame buffer device 170x48
 [    8.388178] fb0: nouveaufb frame buffer device
 [    8.388182] drm: registered panic notifier
 [    8.388232] [drm] Initialized nouveau 0.0.16 20090420 for 0000:05:00.0 on minor 0
 [    8.418589] usb 1-3: link qh512-0001/ffff88006b39da00 start 1 [1/0 us]
 [    8.418694] usb 1-3: unlink qh512-0001/ffff88006b39da00 start 1 [1/0 us]
 [    9.230758] EXT4-fs (sda6): re-mounted. Opts: (null)
 [    9.291478] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
 [    9.304066] device fsid 09538c86-39d2-4051-bd64-6b2b2944e039 devid 1 transid 71914 /dev/sda5
 [   10.512404] Adding 3679228k swap on /dev/sda7.  Priority:-1 extents:1 across:3679228k 
 [   10.704061] hub 2-0:1.0: hub_suspend
 [   10.704091] usb 1-3: usb auto-suspend, wakeup 0
 [   10.704107] usb usb2: bus auto-suspend, wakeup 1
 [   10.704121] ehci_hcd 0000:00:06.1: suspend root hub
 [   12.715043] hub 1-0:1.0: hub_suspend
 [   12.715068] usb usb1: bus auto-suspend, wakeup 1
 [   12.715081] ehci_hcd 0000:00:04.1: suspend root hub
 [   13.280828] ADDRCONF(NETDEV_UP): wlan0: link is not ready
 [   14.813696] EXT4-fs (sda6): re-mounted. Opts: user_xattr,acl,barrier=1,data=ordered,commit=360
 [   14.851965] EXT4-fs (sda1): re-mounted. Opts: user_xattr,acl,barrier=1,data=ordered,commit=360
 [   15.828577] btrfs: disabling disk space caching
 [   15.920931] ehci_hcd 0000:00:04.1: PCI INT B disabled
 [   15.921569] ehci_hcd 0000:00:04.1: hcd_pci_runtime_suspend: 0
 [   15.921617] ehci_hcd 0000:00:04.1: PME# enabled
 [   15.933487] ehci_hcd 0000:00:06.1: PCI INT B disabled
 [   15.934110] ehci_hcd 0000:00:06.1: hcd_pci_runtime_suspend: 0
 [   15.934160] ehci_hcd 0000:00:06.1: PME# enabled
 [   16.147043] ehci_hcd 0000:00:04.1: BAR 0: set to [mem 0xf9f7ec00-0xf9f7ecff] (PCI address [0xf9f7ec00-0xf9f7ecff])
 [   16.147635] ehci_hcd 0000:00:04.1: restoring config space at offset 0xf (was 0x1030200, writing 0x103020b)
 [   16.147656] ehci_hcd 0000:00:04.1: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00002)
 [   16.147704] ehci_hcd 0000:00:04.1: PME# disabled
 [   16.147727] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
 [   16.148332] ehci_hcd 0000:00:04.1: setting latency timer to 64
 [   16.148350] ehci_hcd 0000:00:04.1: hcd_pci_runtime_resume: 0
 [   16.148363] usb usb1: usb auto-resume
 [   16.148369] ehci_hcd 0000:00:04.1: resume root hub
 [   16.189031] hub 1-0:1.0: hub_resume
 [   16.189055] hub 1-0:1.0: port 3: status 0507 change 0000
 [   16.189083] usb 1-3: usb auto-resume
 [   16.189091] hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
 [   16.215053] ehci_hcd 0000:00:04.1: GetStatus port:3 status 001005 0  ACK POWER sig=se0 PE CONNECT
 [   16.226034] usb 1-3: finish resume
 [   16.326044] ehci_hcd 0000:00:06.1: BAR 0: set to [mem 0xf9f7e800-0xf9f7e8ff] (PCI address [0xf9f7e800-0xf9f7e8ff])
 [   16.326669] ehci_hcd 0000:00:06.1: restoring config space at offset 0xf (was 0x1030200, writing 0x103020f)
 [   16.326690] ehci_hcd 0000:00:06.1: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00002)
 [   16.326737] ehci_hcd 0000:00:06.1: PME# disabled
 [   16.326759] ehci_hcd 0000:00:06.1: PCI INT B -> Link[UB12] -> GSI 22 (level, low) -> IRQ 22
 [   16.327377] ehci_hcd 0000:00:06.1: setting latency timer to 64
 [   16.327401] ehci_hcd 0000:00:06.1: hcd_pci_runtime_resume: 0
 [   16.327412] usb usb2: usb auto-resume
 [   16.327428] ehci_hcd 0000:00:06.1: resume root hub
 [   16.368032] hub 2-0:1.0: hub_resume
 [   16.368104] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
 [   20.471735] ADDRCONF(NETDEV_UP): wlan0: link is not ready
 [   23.685214] wlan0: authenticate with 00:c0:a8:da:49:cd (try 1)
 [   23.686767] wlan0: authenticated
 [   23.706926] wlan0: associate with 00:c0:a8:da:49:cd (try 1)
 [   23.713922] wlan0: RX AssocResp from 00:c0:a8:da:49:cd (capab=0x431 status=0 aid=1)
 [   23.713930] wlan0: associated
 [   23.722802] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
 [   32.137364] atl1c 0000:09:00.0: Unable to allocate MSI interrupt Error: -1
 [   32.190239] ADDRCONF(NETDEV_UP): eth0: link is not ready
 [   33.778034] wlan0: no IPv6 routers present
 [   57.824479] EXT4-fs (sda6): re-mounted. Opts: commit=0
 [   57.831215] EXT4-fs (sda1): re-mounted. Opts: commit=0
 [   59.479621] wlan0: deauthenticating from 00:c0:a8:da:49:cd by local choice (reason=3)
 [   59.503303] cfg80211: Calling CRDA for country: EC
 [   59.598094] ehci_hcd 0000:00:06.1: remove, state 1
 [   59.598110] ehci_hcd 0000:00:06.1: roothub graceful disconnect
 [   59.598121] usb usb2: USB disconnect, device number 1
 [   59.598126] usb usb2: unregistering device
 [   59.598132] usb usb2: unregistering interface 2-0:1.0
 [   59.598207] ehci_hcd 0000:00:06.1: shutdown urb ffff88006ba3ac00 ep1in-intr
 [   59.598455] usb usb2: usb_disable_device nuking all URBs
 [   59.599268] ehci_hcd 0000:00:06.1: stop
 [   59.599297] ehci_hcd 0000:00:06.1: reset command 0010006 (park)=0 ithresh=1 period=512 Reset HALT
 [   59.599335] ehci_hcd 0000:00:06.1: irq normal 0 err 0 reclaim 0 (lost 0)
 [   59.599345] ehci_hcd 0000:00:06.1: complete 0 unlink 0
 [   59.599357] ehci_hcd 0000:00:06.1: ehci_stop completed status 1000 Halt
 [   59.599391] ehci_hcd 0000:00:06.1: USB bus 2 deregistered
 [   59.599748] ehci_hcd 0000:00:06.1: PCI INT B disabled
 [   59.599785] ehci_hcd 0000:00:04.1: remove, state 1
 [   59.599802] ehci_hcd 0000:00:04.1: roothub graceful disconnect
 [   59.599818] usb usb1: USB disconnect, device number 1
 [   59.599827] usb 1-3: USB disconnect, device number 3
 [   59.599835] usb 1-3: unregistering device
 [   59.599844] usb 1-3: unregistering interface 1-3:1.0
 [   59.612452] usb 1-3: unregistering interface 1-3:1.1
 [   59.612635] usb 1-3: usb_disable_device nuking all URBs
 [   59.613047] usb usb1: unregistering device
 [   59.613057] usb usb1: unregistering interface 1-0:1.0
 [   59.613142] ehci_hcd 0000:00:04.1: shutdown urb ffff88006b2f4000 ep1in-intr
 [   59.613875] usb usb1: usb_disable_device nuking all URBs
 [   59.615431] ehci_hcd 0000:00:04.1: stop
 [   59.615456] ehci_hcd 0000:00:04.1: reset command 0010006 (park)=0 ithresh=1 period=512 Reset HALT
 [   59.615486] ehci_hcd 0000:00:04.1: irq normal 16 err 0 reclaim 5 (lost 0)
 [   59.615492] ehci_hcd 0000:00:04.1: complete 16 unlink 1
 [   59.615499] ehci_hcd 0000:00:04.1: ehci_stop completed status 1004 Halt PCD
 [   59.615522] ehci_hcd 0000:00:04.1: USB bus 1 deregistered
 [   59.615840] ehci_hcd 0000:00:04.1: PCI INT B disabled
 [   59.618491] hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0008
 [   59.618517] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [2] = 0x00010101 CSC PPS CCS
 [   59.618536] hub 3-0:1.0: port 3, status 0101, change 0001, 12 Mb/s
 [   59.643079] ohci_hcd 0000:00:06.0: remove, state 1
 [   59.643095] ohci_hcd 0000:00:06.0: roothub graceful disconnect
 [   59.643106] usb usb4: USB disconnect, device number 1
 [   59.643112] usb 4-3: USB disconnect, device number 2
 [   59.643117] usb 4-3: unregistering device
 [   59.643123] usb 4-3: unregistering interface 4-3:1.0
 [   59.643424] usb 4-3: unregistering interface 4-3:1.1
 [   59.643622] usb 4-3: unregistering interface 4-3:1.2
 [   59.643827] usb 4-3: unregistering interface 4-3:1.3
 [   59.643998] usb 4-3: usb_disable_device nuking all URBs
 [   59.645413] usb usb4: unregistering device
 [   59.645422] usb usb4: unregistering interface 4-0:1.0
 [   59.645500] ohci_hcd 0000:00:06.0: shutdown urb ffff88006b55fa80 ep1in-intr
 [   59.645676] usb usb4: usb_disable_device nuking all URBs
 [   59.645998] ohci_hcd 0000:00:06.0: OHCI controller state
 [   59.646052] ohci_hcd 0000:00:06.0: OHCI 1.0, NO legacy support registers
 [   59.646064] ohci_hcd 0000:00:06.0: control 0x683 RWE RWC HCFS=operational CBSR=3
 [   59.646074] ohci_hcd 0000:00:06.0: cmdstatus 0x00000 SOC=0
 [   59.646083] ohci_hcd 0000:00:06.0: intrstatus 0x00000024 FNO SF
 [   59.646092] ohci_hcd 0000:00:06.0: intrenable 0x8000005a MIE RHSC UE RD WDH
 [   59.646101] ohci_hcd 0000:00:06.0: ed_controlhead 6b0eb000
 [   59.646109] ohci_hcd 0000:00:06.0: hcca frame #cf54
 [   59.646119] ohci_hcd 0000:00:06.0: roothub.a 01001206 POTPGT=1 NOCP NPS NDP=6(6)
 [   59.646128] ohci_hcd 0000:00:06.0: roothub.b 00000000 PPCM=0000 DR=0000
 [   59.646137] ohci_hcd 0000:00:06.0: roothub.status 00008000 DRWE
 [   59.646146] ohci_hcd 0000:00:06.0: roothub.portstatus [0] 0x00000100 PPS
 [   59.646156] ohci_hcd 0000:00:06.0: roothub.portstatus [1] 0x00000100 PPS
 [   59.646166] ohci_hcd 0000:00:06.0: roothub.portstatus [2] 0x00000103 PPS PES CCS
 [   59.646176] ohci_hcd 0000:00:06.0: roothub.portstatus [3] 0x00000100 PPS
 [   59.646186] ohci_hcd 0000:00:06.0: roothub.portstatus [4] 0x00000100 PPS
 [   59.646196] ohci_hcd 0000:00:06.0: roothub.portstatus [5] 0x00000100 PPS
 [   59.646229] ohci_hcd 0000:00:06.0: USB bus 4 deregistered
 [   59.648443] ohci_hcd 0000:00:06.0: PCI INT A disabled
 [   59.648477] ohci_hcd 0000:00:04.0: remove, state 1
 [   59.648489] ohci_hcd 0000:00:04.0: roothub graceful disconnect
 [   59.648500] usb usb3: USB disconnect, device number 1
 [   59.670044] hub 3-0:1.0: hub_port_status failed (err = -19)
 [   59.670053] hub 3-0:1.0: connect-debounce failed, port 3 disabled
 [   59.670084] usb 3-1: USB disconnect, device number 2
 [   59.670092] usb 3-1: unregistering device
 [   59.670098] usb 3-1: unregistering interface 3-1:1.0
 [   59.670187] ohci_hcd 0000:00:04.0: shutdown urb ffff88006b15c900 ep1in-intr
 [   59.693750] usb 3-1: unregistering interface 3-1:1.1
 [   59.693833] ohci_hcd 0000:00:04.0: shutdown urb ffff88006b126d80 ep2in-intr
 [   59.705463] drivers/usb/core/file.c: removing 96 minor
 [   59.706915] usb 3-1: usb_disable_device nuking all URBs
 [   59.707589] usb usb3: unregistering device
 [   59.707598] usb usb3: unregistering interface 3-0:1.0
 [   59.707676] ohci_hcd 0000:00:04.0: shutdown urb ffff88006b047f00 ep1in-intr
 [   59.707818] usb usb3: usb_disable_device nuking all URBs
 [   59.708707] ohci_hcd 0000:00:04.0: OHCI controller state
 [   59.708717] ohci_hcd 0000:00:04.0: OHCI 1.0, NO legacy support registers
 [   59.708726] ohci_hcd 0000:00:04.0: control 0x683 RWE RWC HCFS=operational CBSR=3
 [   59.708733] ohci_hcd 0000:00:04.0: cmdstatus 0x00000 SOC=0
 [   59.708740] ohci_hcd 0000:00:04.0: intrstatus 0x00000024 FNO SF
 [   59.708747] ohci_hcd 0000:00:04.0: intrenable 0x8000005a MIE RHSC UE RD WDH
 [   59.708754] ohci_hcd 0000:00:04.0: ed_controlhead 6adbd000
 [   59.708761] ohci_hcd 0000:00:04.0: hcca frame #cfd4
 [   59.708768] ohci_hcd 0000:00:04.0: roothub.a 01001203 POTPGT=1 NOCP NPS NDP=3(3)
 [   59.708775] ohci_hcd 0000:00:04.0: roothub.b 00000000 PPCM=0000 DR=0000
 [   59.708782] ohci_hcd 0000:00:04.0: roothub.status 00008000 DRWE
 [   59.708790] ohci_hcd 0000:00:04.0: roothub.portstatus [0] 0x00000103 PPS PES CCS
 [   59.708797] ohci_hcd 0000:00:04.0: roothub.portstatus [1] 0x00000100 PPS
 [   59.708805] ohci_hcd 0000:00:04.0: roothub.portstatus [2] 0x00000101 PPS CCS
 [   59.708838] ohci_hcd 0000:00:04.0: USB bus 3 deregistered
 [   59.710395] ohci_hcd 0000:00:04.0: PCI INT A disabled
 [   59.770714] rtl8192se 0000:07:00.0: PCI INT A disabled
 [   60.556278] PM: Syncing filesystems ... done.
 [   60.623854] Freezing user space processes ... (elapsed 0.01 seconds) done.
 [   60.635093] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
 [   60.646108] Suspending console(s) (use no_console_suspend to debug)
 [   60.646713] sd 0:0:0:0: [sda] Synchronizing SCSI cache
 [   60.647495] sd 0:0:0:0: [sda] Stopping disk
 [   60.725197] [drm] nouveau 0000:05:00.0: Disabling display...
 [   60.966072] snd_hda_intel 0000:00:08.0: PCI INT A disabled
 [   60.977257] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D3
 [   61.095257] ahci 0000:00:0b.0: PCI INT A disabled
 [   61.822973] [drm] nouveau 0000:05:00.0: Disabling fbcon...
 [   61.823017] [drm] nouveau 0000:05:00.0: Unpinning framebuffer(s)...
 [   61.823076] [drm] nouveau 0000:05:00.0: Evicting buffers...
 [   61.847412] [drm] nouveau 0000:05:00.0: Idling channels...
 [   61.847589] [drm] nouveau 0000:05:00.0: Suspending GPU objects...
 [   63.158110] [drm] nouveau 0000:05:00.0: And we're gone!
 [   63.158163] nouveau 0000:05:00.0: PCI INT A disabled
 [   63.169153] PM: suspend of devices complete after 2522.670 msecs
 [   63.180556] PM: late suspend of devices complete after 11.391 msecs
 [   63.180610] ACPI: Preparing to enter system sleep state S3
 [   63.194708] PM: Saving platform NVS memory
 [   63.195852] Disabling non-boot CPUs ...
 [   63.197672] CPU 1 is now offline
 [   63.199990] CPU 2 is now offline
 [   63.202252] CPU 3 is now offline
 [   63.202928] Extended CMOS year: 2000
 [   63.202928] ACPI: Low-level resume complete
 [   63.202928] PM: Restoring platform NVS memory
 [   63.202928] Extended CMOS year: 2000
 [   63.207567] Enabling non-boot CPUs ...
 [   63.207800] Booting Node 0 Processor 1 APIC 0x2
 [   63.207807] smpboot cpu 1: start_ip = 9a000
 [   63.197372] Calibrating delay loop (skipped) already calibrated this CPU
 [   63.197372] Disabled fast string operations
 [   63.239555] CPU1 is up
 [   63.239769] Booting Node 0 Processor 2 APIC 0x1
 [   63.239773] smpboot cpu 2: start_ip = 9a000
 [   63.199776] Calibrating delay loop (skipped) already calibrated this CPU
 [   63.199776] Disabled fast string operations
 [   63.271514] CPU2 is up
 [   63.271784] Booting Node 0 Processor 3 APIC 0x3
 [   63.271788] smpboot cpu 3: start_ip = 9a000
 [   63.202127] Calibrating delay loop (skipped) already calibrated this CPU
 [   63.202127] Disabled fast string operations
 [   63.283009] TSC synchronization [CPU#0 -> CPU#3]:
 [   63.283009] Measured 48 cycles TSC warp between CPUs, turning off TSC clock.
 [   63.283009] Marking TSC unstable due to check_tsc_sync_source failed
 [   63.303241] Switching to clocksource hpet
 [   63.303606] CPU3 is up
 [   63.305336] ACPI: Waking up from system sleep state S3
 [   63.402645] pci 0000:00:04.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003)
 [   63.402689] pci 0000:00:04.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
 [   63.402731] pci 0000:00:06.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003)
 [   63.402771] pci 0000:00:06.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
 [   63.402813] snd_hda_intel 0000:00:08.0: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
 [   63.402910] pci 0000:00:10.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010)
 [   63.403360] pci 0000:07:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100003)
 [   63.403428] atl1c 0000:09:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100007)
 [   63.403679] PM: early resume of devices complete after 1.458 msecs
 [   63.404137] pci 0000:00:09.0: setting latency timer to 64
 [   63.404261] pci 0000:00:10.0: setting latency timer to 64
 [   63.404297] [drm] nouveau 0000:05:00.0: We're back, enabling device...
 [   63.404494] ahci 0000:00:0b.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
 [   63.404511] ahci 0000:00:0b.0: setting latency timer to 64
 [   63.404678] sd 0:0:0:0: [sda] Starting disk
 [   63.404821] nouveau 0000:05:00.0: PCI INT A -> Link[SGRU] -> GSI 23 (level, low) -> IRQ 23
 [   63.404830] nouveau 0000:05:00.0: setting latency timer to 64
 [   63.404837] [drm] nouveau 0000:05:00.0: POSTing device...
 [   63.404844] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 0 at offset 0xDEFA
 [   63.404910] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0
 [   63.404926] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0
 [   63.404939] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0
 [   63.404949] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0
 [   63.404969] snd_hda_intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 20 (level, low) -> IRQ 20
 [   63.404982] snd_hda_intel 0000:00:08.0: setting latency timer to 64
 [   63.490184] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 1 at offset 0xE1D2
 [   63.490189] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 2 at offset 0xE1D4
 [   63.490224] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 3 at offset 0xE295
 [   63.490242] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 4 at offset 0xE35A
 [   63.490247] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table at offset 0xE3BF
 [   63.510299] [drm] nouveau 0000:05:00.0: Restoring GPU objects...
 [   63.673211] [drm] nouveau 0000:05:00.0: Reinitialising engines...
 [   63.682612] [drm] nouveau 0000:05:00.0: Restoring mode...
 [   64.120059] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
 [   64.133916] ata1.00: configured for UDMA/133
 [   64.153657] PM: resume of devices complete after 749.868 msecs
 [   64.154378] Restarting tasks ... done.
 [   64.424508] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 [   64.424522] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
 [   64.424606] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
 [   64.424683] ehci_hcd 0000:00:04.1: setting latency timer to 64
 [   64.424694] ehci_hcd 0000:00:04.1: EHCI Host Controller
 [   64.425469] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
 [   64.425504] ehci_hcd 0000:00:04.1: reset hcs_params 0x101c83 dbg=1 cc=1 pcc=12 !ppc ports=3
 [   64.425515] ehci_hcd 0000:00:04.1: reset portroute 0 0 0 
 [   64.425525] ehci_hcd 0000:00:04.1: reset hcc_params a086 caching frame 256/512/1024 park
 [   64.425557] ehci_hcd 0000:00:04.1: park 0
 [   64.425575] ehci_hcd 0000:00:04.1: debug port 1
 [   64.425588] ehci_hcd 0000:00:04.1: reset command 0080b02  park=3 ithresh=8 period=1024 Reset HALT
 [   64.425604] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
 [   64.425611] ehci_hcd 0000:00:04.1: supports USB remote wakeup
 [   64.425639] ehci_hcd 0000:00:04.1: irq 23, io mem 0xf9f7ec00
 [   64.425652] ehci_hcd 0000:00:04.1: reset command 0080b02  park=3 ithresh=8 period=1024 Reset HALT
 [   64.425666] ehci_hcd 0000:00:04.1: init command 0010005 (park)=0 ithresh=1 period=512 RUN
 [   64.431085] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
 [   64.431147] usb usb1: default language 0x0409
 [   64.431163] usb usb1: udev 1, busnum 1, minor = 0
 [   64.431169] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
 [   64.431175] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
 [   64.431181] usb usb1: Product: EHCI Host Controller
 [   64.431186] usb usb1: Manufacturer: Linux 3.2.0-rc5+ ehci_hcd
 [   64.431191] usb usb1: SerialNumber: 0000:00:04.1
 [   64.431643] usb usb1: usb_probe_device
 [   64.431655] usb usb1: configuration #1 chosen from 1 choice
 [   64.431689] usb usb1: adding 1-0:1.0 (config #1, interface 0)
 [   64.431957] hub 1-0:1.0: usb_probe_interface
 [   64.431966] hub 1-0:1.0: usb_probe_interface - got id
 [   64.431977] hub 1-0:1.0: USB hub found
 [   64.432002] hub 1-0:1.0: 3 ports detected
 [   64.432051] hub 1-0:1.0: standalone hub
 [   64.432058] hub 1-0:1.0: no power switching (usb 1.0)
 [   64.432065] hub 1-0:1.0: individual port over-current protection
 [   64.432072] hub 1-0:1.0: power on to power good time: 20ms
 [   64.432089] hub 1-0:1.0: local power source is good
 [   64.432098] hub 1-0:1.0: trying to enable port power on non-switchable hub
 [   64.442302] ehci_hcd 0000:00:06.1: PCI INT B -> Link[UB12] -> GSI 22 (level, low) -> IRQ 22
 [   64.442381] ehci_hcd 0000:00:06.1: setting latency timer to 64
 [   64.442391] ehci_hcd 0000:00:06.1: EHCI Host Controller
 [   64.442866] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
 [   64.442894] ehci_hcd 0000:00:06.1: reset hcs_params 0x101c86 dbg=1 cc=1 pcc=12 !ppc ports=6
 [   64.442907] ehci_hcd 0000:00:06.1: reset portroute 0 0 0 0 0 0 
 [   64.442914] ehci_hcd 0000:00:06.1: reset hcc_params a086 caching frame 256/512/1024 park
 [   64.442950] ehci_hcd 0000:00:06.1: park 0
 [   64.442964] ehci_hcd 0000:00:06.1: debug port 1
 [   64.442975] ehci_hcd 0000:00:06.1: reset command 0080b02  park=3 ithresh=8 period=1024 Reset HALT
 [   64.442989] ehci_hcd 0000:00:06.1: cache line size of 64 is not supported
 [   64.442994] ehci_hcd 0000:00:06.1: supports USB remote wakeup
 [   64.443093] ehci_hcd 0000:00:06.1: irq 22, io mem 0xf9f7e800
 [   64.443108] ehci_hcd 0000:00:06.1: reset command 0080b02  park=3 ithresh=8 period=1024 Reset HALT
 [   64.443123] ehci_hcd 0000:00:06.1: init command 0010005 (park)=0 ithresh=1 period=512 RUN
 [   64.449057] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
 [   64.449137] usb usb2: default language 0x0409
 [   64.449154] usb usb2: udev 1, busnum 2, minor = 128
 [   64.449160] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
 [   64.449166] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
 [   64.449172] usb usb2: Product: EHCI Host Controller
 [   64.449177] usb usb2: Manufacturer: Linux 3.2.0-rc5+ ehci_hcd
 [   64.449183] usb usb2: SerialNumber: 0000:00:06.1
 [   64.449650] usb usb2: usb_probe_device
 [   64.449660] usb usb2: configuration #1 chosen from 1 choice
 [   64.449685] usb usb2: adding 2-0:1.0 (config #1, interface 0)
 [   64.449916] hub 2-0:1.0: usb_probe_interface
 [   64.449922] hub 2-0:1.0: usb_probe_interface - got id
 [   64.449929] hub 2-0:1.0: USB hub found
 [   64.449944] hub 2-0:1.0: 6 ports detected
 [   64.449949] hub 2-0:1.0: standalone hub
 [   64.449954] hub 2-0:1.0: no power switching (usb 1.0)
 [   64.449958] hub 2-0:1.0: individual port over-current protection
 [   64.449964] hub 2-0:1.0: power on to power good time: 20ms
 [   64.449973] hub 2-0:1.0: local power source is good
 [   64.449979] hub 2-0:1.0: trying to enable port power on non-switchable hub
 [   64.484838] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
 [   64.484852] ohci_hcd: block sizes: ed 80 td 96
 [   64.484931] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 21 (level, low) -> IRQ 21
 [   64.485055] ohci_hcd 0000:00:04.0: setting latency timer to 64
 [   64.485065] ohci_hcd 0000:00:04.0: OHCI Host Controller
 [   64.486475] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
 [   64.486514] ohci_hcd 0000:00:04.0: created debug files
 [   64.486522] ohci_hcd 0000:00:04.0: supports USB remote wakeup
 [   64.486551] ohci_hcd 0000:00:04.0: irq 21, io mem 0xf9f7f000
 [   64.532087] ehci_hcd 0000:00:04.1: GetStatus port:1 status 001803 0  ACK POWER sig=j CSC CONNECT
 [   64.532108] hub 1-0:1.0: port 1: status 0501 change 0001
 [   64.532137] ehci_hcd 0000:00:04.1: GetStatus port:3 status 001803 0  ACK POWER sig=j CSC CONNECT
 [   64.532151] hub 1-0:1.0: port 3: status 0501 change 0001
 [   64.539075] ohci_hcd 0000:00:04.0: OHCI controller state
 [   64.539089] ohci_hcd 0000:00:04.0: OHCI 1.0, NO legacy support registers
 [   64.539101] ohci_hcd 0000:00:04.0: control 0x683 RWE RWC HCFS=operational CBSR=3
 [   64.539110] ohci_hcd 0000:00:04.0: cmdstatus 0x00000 SOC=0
 [   64.539120] ohci_hcd 0000:00:04.0: intrstatus 0x00000004 SF
 [   64.539129] ohci_hcd 0000:00:04.0: intrenable 0x8000005a MIE RHSC UE RD WDH
 [   64.539140] ohci_hcd 0000:00:04.0: hcca frame #0003
 [   64.539150] ohci_hcd 0000:00:04.0: roothub.a 01001203 POTPGT=1 NOCP NPS NDP=3(3)
 [   64.539160] ohci_hcd 0000:00:04.0: roothub.b 00000000 PPCM=0000 DR=0000
 [   64.539169] ohci_hcd 0000:00:04.0: roothub.status 00008000 DRWE
 [   64.539179] ohci_hcd 0000:00:04.0: roothub.portstatus [0] 0x00000100 PPS
 [   64.539190] ohci_hcd 0000:00:04.0: roothub.portstatus [1] 0x00000100 PPS
 [   64.539200] ohci_hcd 0000:00:04.0: roothub.portstatus [2] 0x00000100 PPS
 [   64.539296] usb usb3: default language 0x0409
 [   64.539321] usb usb3: udev 1, busnum 3, minor = 256
 [   64.539329] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
 [   64.539340] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
 [   64.539349] usb usb3: Product: OHCI Host Controller
 [   64.539356] usb usb3: Manufacturer: Linux 3.2.0-rc5+ ohci_hcd
 [   64.539363] usb usb3: SerialNumber: 0000:00:04.0
 [   64.539846] usb usb3: usb_probe_device
 [   64.539857] usb usb3: configuration #1 chosen from 1 choice
 [   64.539891] usb usb3: adding 3-0:1.0 (config #1, interface 0)
 [   64.542131] hub 3-0:1.0: usb_probe_interface
 [   64.542146] hub 3-0:1.0: usb_probe_interface - got id
 [   64.542161] hub 3-0:1.0: USB hub found
 [   64.542199] hub 3-0:1.0: 3 ports detected
 [   64.542209] hub 3-0:1.0: standalone hub
 [   64.542216] hub 3-0:1.0: no power switching (usb 1.0)
 [   64.542224] hub 3-0:1.0: no over-current protection
 [   64.542233] hub 3-0:1.0: power on to power good time: 2ms
 [   64.542253] hub 3-0:1.0: local power source is good
 [   64.542264] hub 3-0:1.0: trying to enable port power on non-switchable hub
 [   64.550145] ehci_hcd 0000:00:06.1: GetStatus port:3 status 001803 0  ACK POWER sig=j CSC CONNECT
 [   64.550163] hub 2-0:1.0: port 3: status 0501 change 0001
 [   64.550229] ehci_hcd 0000:00:04.1: HS companion for 0000:00:04.0
 [   64.550327] ohci_hcd 0000:00:06.0: PCI INT A -> Link[UB11] -> GSI 20 (level, low) -> IRQ 20
 [   64.550399] ohci_hcd 0000:00:06.0: setting latency timer to 64
 [   64.550411] ohci_hcd 0000:00:06.0: OHCI Host Controller
 [   64.553173] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
 [   64.553222] ohci_hcd 0000:00:06.0: created debug files
 [   64.553231] ohci_hcd 0000:00:06.0: supports USB remote wakeup
 [   64.553263] ohci_hcd 0000:00:06.0: irq 20, io mem 0xf9f7d000
 [   64.606088] ohci_hcd 0000:00:06.0: OHCI controller state
 [   64.606099] ohci_hcd 0000:00:06.0: OHCI 1.0, NO legacy support registers
 [   64.606108] ohci_hcd 0000:00:06.0: control 0x683 RWE RWC HCFS=operational CBSR=3
 [   64.606116] ohci_hcd 0000:00:06.0: cmdstatus 0x00000 SOC=0
 [   64.606123] ohci_hcd 0000:00:06.0: intrstatus 0x00000004 SF
 [   64.606130] ohci_hcd 0000:00:06.0: intrenable 0x8000005a MIE RHSC UE RD WDH
 [   64.606139] ohci_hcd 0000:00:06.0: hcca frame #0003
 [   64.606146] ohci_hcd 0000:00:06.0: roothub.a 01001206 POTPGT=1 NOCP NPS NDP=6(6)
 [   64.606153] ohci_hcd 0000:00:06.0: roothub.b 00000000 PPCM=0000 DR=0000
 [   64.606160] ohci_hcd 0000:00:06.0: roothub.status 00008000 DRWE
 [   64.606168] ohci_hcd 0000:00:06.0: roothub.portstatus [0] 0x00000100 PPS
 [   64.606175] ohci_hcd 0000:00:06.0: roothub.portstatus [1] 0x00000100 PPS
 [   64.606183] ohci_hcd 0000:00:06.0: roothub.portstatus [2] 0x00000100 PPS
 [   64.606190] ohci_hcd 0000:00:06.0: roothub.portstatus [3] 0x00000100 PPS
 [   64.606198] ohci_hcd 0000:00:06.0: roothub.portstatus [4] 0x00000100 PPS
 [   64.606205] ohci_hcd 0000:00:06.0: roothub.portstatus [5] 0x00000100 PPS
 [   64.606255] usb usb4: default language 0x0409
 [   64.606271] usb usb4: udev 1, busnum 4, minor = 384
 [   64.606276] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
 [   64.606286] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
 [   64.606292] usb usb4: Product: OHCI Host Controller
 [   64.606297] usb usb4: Manufacturer: Linux 3.2.0-rc5+ ohci_hcd
 [   64.606302] usb usb4: SerialNumber: 0000:00:06.0
 [   64.606856] usb usb4: usb_probe_device
 [   64.606868] usb usb4: configuration #1 chosen from 1 choice
 [   64.606908] usb usb4: adding 4-0:1.0 (config #1, interface 0)
 [   64.609403] hub 4-0:1.0: usb_probe_interface
 [   64.609415] hub 4-0:1.0: usb_probe_interface - got id
 [   64.609428] hub 4-0:1.0: USB hub found
 [   64.609459] hub 4-0:1.0: 6 ports detected
 [   64.609469] hub 4-0:1.0: standalone hub
 [   64.609476] hub 4-0:1.0: no power switching (usb 1.0)
 [   64.609483] hub 4-0:1.0: no over-current protection
 [   64.609491] hub 4-0:1.0: power on to power good time: 2ms
 [   64.609511] hub 4-0:1.0: local power source is good
 [   64.609522] hub 4-0:1.0: trying to enable port power on non-switchable hub
 [   64.622318] ehci_hcd 0000:00:06.1: HS companion for 0000:00:06.0
 [   64.632123] hub 1-0:1.0: state 7 ports 3 chg 000a evt 0000
 [   64.632159] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
 [   64.634003] rtl8192se 0000:07:00.0: PCI INT A -> Link[LN4A] -> GSI 18 (level, low) -> IRQ 18
 [   64.634080] rtl8192se 0000:07:00.0: setting latency timer to 64
 [   64.646131] rtl8192se: rtl8192ce: FW Power Save off (module option)
 [   64.646349] rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE
 [   64.646353] Loading firmware rtlwifi/rtl8192sefw.bin
 [   64.655006] ieee80211 phy1: Selected rate control algorithm 'rtl_rc'
 [   64.683085] ehci_hcd 0000:00:04.1: port 1 full speed --> companion
 [   64.683104] ehci_hcd 0000:00:04.1: GetStatus port:1 status 003001 0  ACK POWER OWNER sig=se0 CONNECT
 [   64.683171] hub 1-0:1.0: port 1 not reset yet, waiting 50ms
 [   64.734065] ehci_hcd 0000:00:04.1: GetStatus port:1 status 003802 0  ACK POWER OWNER sig=j CSC
 [   64.734105] hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
 [   64.785312] ehci_hcd 0000:00:04.1: port 3 high speed
 [   64.785335] ehci_hcd 0000:00:04.1: GetStatus port:3 status 001005 0  ACK POWER sig=se0 PE CONNECT
 [   64.836086] usb 1-3: new high-speed USB device number 3 using ehci_hcd
 [   64.887311] ehci_hcd 0000:00:04.1: port 3 high speed
 [   64.887325] ehci_hcd 0000:00:04.1: GetStatus port:3 status 001005 0  ACK POWER sig=se0 PE CONNECT
 [   64.953583] usb 1-3: skipped 1 descriptor after configuration
 [   64.953590] usb 1-3: skipped 5 descriptors after interface
 [   64.953597] usb 1-3: skipped 1 descriptor after endpoint
 [   64.953603] usb 1-3: skipped 14 descriptors after interface
 [   64.953817] usb 1-3: default language 0x0409
 [   64.954582] usb 1-3: udev 3, busnum 1, minor = 2
 [   64.954593] usb 1-3: New USB device found, idVendor=13d3, idProduct=5126
 [   64.954606] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=2
 [   64.954616] usb 1-3: Product: USB 2.0 PC Cam
 [   64.954624] usb 1-3: Manufacturer: Image Processor
 [   64.954631] usb 1-3: SerialNumber: USB 2.0 PC Cam
 [   64.955916] usb 1-3: usb_probe_device
 [   64.955928] usb 1-3: configuration #1 chosen from 1 choice
 [   64.956250] usb 1-3: adding 1-3:1.0 (config #1, interface 0)
 [   64.956631] uvcvideo 1-3:1.0: usb_probe_interface
 [   64.956640] uvcvideo 1-3:1.0: usb_probe_interface - got id
 [   64.956674] uvcvideo: Found UVC 1.00 device USB 2.0 PC Cam (13d3:5126)
 [   65.350650] input: USB 2.0 PC Cam as /devices/pci0000:00/0000:00:04.1/usb1/1-3/1-3:1.0/input/input10
 [   65.351619] usb 1-3: adding 1-3:1.1 (config #1, interface 1)
 [   65.352181] usb 1-3: usb auto-suspend, wakeup 0
 [   65.363074] hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0002
 [   65.363101] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
 [   65.363118] usb 1-3: usb auto-resume
 [   65.363133] hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
 [   65.389065] ehci_hcd 0000:00:04.1: GetStatus port:3 status 001005 0  ACK POWER sig=se0 PE CONNECT
 [   65.400054] usb 1-3: finish resume
 [   65.401225] usb 1-3: link qh512-0001/ffff880063eaaf00 start 1 [1/0 us]
 [   65.401368] usb 1-3: unlink qh512-0001/ffff880063eaaf00 start 1 [1/0 us]
 [   65.401471] usb 1-3: usb auto-suspend, wakeup 0
 [   65.467049] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
 [   65.573053] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
 [   65.624058] usb 3-1: new full-speed USB device number 2 using ohci_hcd
 [   65.732069] ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
 [   65.797036] usb 3-1: ep0 maxpacket = 8
 [   65.813101] usb 3-1: skipped 1 descriptor after interface
 [   65.813109] usb 3-1: skipped 1 descriptor after interface
 [   65.816104] usb 3-1: default language 0x0409
 [   65.822098] usb 3-1: udev 2, busnum 3, minor = 257
 [   65.822105] usb 3-1: New USB device found, idVendor=046d, idProduct=c52f
 [   65.822113] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
 [   65.822119] usb 3-1: Product: USB Receiver
 [   65.822124] usb 3-1: Manufacturer: Logitech
 [   65.822573] usb 3-1: usb_probe_device
 [   65.822587] usb 3-1: configuration #1 chosen from 1 choice
 [   65.828093] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
 [   65.828375] usbhid 3-1:1.0: usb_probe_interface
 [   65.828384] usbhid 3-1:1.0: usb_probe_interface - got id
 [   65.834715] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.0/usb3/3-1/3-1:1.0/input/input11
 [   65.835756] generic-usb 0003:046D:C52F.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:04.0-1/input0
 [   65.835824] usb 3-1: adding 3-1:1.1 (config #1, interface 1)
 [   65.836098] usbhid 3-1:1.1: usb_probe_interface
 [   65.836107] usbhid 3-1:1.1: usb_probe_interface - got id
 [   65.846587] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.0/usb3/3-1/3-1:1.1/input/input12
 [   65.847264] usbhid 3-1:1.1: looking for a minor, starting at 96
 [   65.848078] generic-usb 0003:046D:C52F.0004: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.0-1/input1
 [   65.848217] hub 2-0:1.0: state 7 ports 6 chg 0008 evt 0000
 [   65.848246] hub 2-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
 [   65.900063] ehci_hcd 0000:00:06.1: port 3 full speed --> companion
 [   65.900080] ehci_hcd 0000:00:06.1: GetStatus port:3 status 003001 0  ACK POWER OWNER sig=se0 CONNECT
 [   65.900095] hub 2-0:1.0: port 3 not reset yet, waiting 50ms
 [   65.951063] ehci_hcd 0000:00:06.1: GetStatus port:3 status 003802 0  ACK POWER OWNER sig=j CSC
 [   65.951105] hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0002
 [   65.951133] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0008
 [   65.951149] ohci_hcd 0000:00:06.0: GetStatus roothub.portstatus [2] = 0x00010101 CSC PPS CCS
 [   65.951162] hub 4-0:1.0: port 3, status 0101, change 0001, 12 Mb/s
 [   65.951186] hub 1-0:1.0: hub_suspend
 [   65.951201] usb usb1: bus auto-suspend, wakeup 1
 [   65.951208] ehci_hcd 0000:00:04.1: suspend root hub
 [   65.962058] ehci_hcd 0000:00:04.1: PCI INT B disabled
 [   65.962070] ehci_hcd 0000:00:04.1: hcd_pci_runtime_suspend: 0
 [   65.962114] ehci_hcd 0000:00:04.1: PME# enabled
 [   66.020816] ADDRCONF(NETDEV_UP): wlan0: link is not ready
 [   66.055056] hub 4-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x101
 [   66.161057] ohci_hcd 0000:00:06.0: GetStatus roothub.portstatus [2] = 0x00100103 PRSC PPS PES CCS
 [   66.212055] usb 4-3: new full-speed USB device number 2 using ohci_hcd
 [   66.320060] ohci_hcd 0000:00:06.0: GetStatus roothub.portstatus [2] = 0x00100103 PRSC PPS PES CCS
 [   66.401125] usb 4-3: skipped 1 descriptor after interface
 [   66.404115] usb 4-3: default language 0x0409
 [   66.413109] usb 4-3: udev 2, busnum 4, minor = 385
 [   66.413116] usb 4-3: New USB device found, idVendor=0b05, idProduct=1788
 [   66.413124] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
 [   66.413130] usb 4-3: Product: BT-270
 [   66.413135] usb 4-3: Manufacturer: Broadcom Corp
 [   66.413139] usb 4-3: SerialNumber: 1C4BD60611A4
 [   66.413602] usb 4-3: usb_probe_device
 [   66.413611] usb 4-3: configuration #1 chosen from 1 choice
 [   66.416161] usb 4-3: adding 4-3:1.0 (config #1, interface 0)
 [   66.416552] usb 4-3: adding 4-3:1.1 (config #1, interface 1)
 [   66.416830] usb 4-3: adding 4-3:1.2 (config #1, interface 2)
 [   66.417178] usb 4-3: adding 4-3:1.3 (config #1, interface 3)
 [   66.417620] hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0002
 [   66.417644] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0008
 [   66.417669] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0008
 [   66.417684] hub 2-0:1.0: hub_suspend
 [   66.417699] usb usb2: bus auto-suspend, wakeup 1
 [   66.417705] ehci_hcd 0000:00:06.1: suspend root hub
 [   66.428650] ehci_hcd 0000:00:06.1: PCI INT B disabled
 [   66.428668] ehci_hcd 0000:00:06.1: hcd_pci_runtime_suspend: 0
 [   66.428721] ehci_hcd 0000:00:06.1: PME# enabled
 [   68.201830] ADDRCONF(NETDEV_UP): wlan0: link is not ready
 [   71.408250] wlan0: authenticate with 00:c0:a8:da:49:cd (try 1)
 [   71.410313] wlan0: authenticated
 [   71.430473] wlan0: associate with 00:c0:a8:da:49:cd (try 1)
 [   71.437597] wlan0: RX AssocResp from 00:c0:a8:da:49:cd (capab=0x431 status=0 aid=1)
 [   71.437605] wlan0: associated
 [   71.439459] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
 [   80.947214] EXT4-fs (sda6): re-mounted. Opts: user_xattr,acl,barrier=1,data=ordered,commit=360
 [   80.992481] EXT4-fs (sda1): re-mounted. Opts: user_xattr,acl,barrier=1,data=ordered,commit=360
 [   81.096411] btrfs: disabling disk space caching
 [   81.541061] ehci_hcd 0000:00:04.1: BAR 0: set to [mem 0xf9f7ec00-0xf9f7ecff] (PCI address [0xf9f7ec00-0xf9f7ecff])
 [   81.541086] ehci_hcd 0000:00:04.1: restoring config space at offset 0xf (was 0x1030200, writing 0x103020b)
 [   81.541106] ehci_hcd 0000:00:04.1: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00002)
 [   81.541153] ehci_hcd 0000:00:04.1: PME# disabled
 [   81.541175] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
 [   81.541187] ehci_hcd 0000:00:04.1: setting latency timer to 64
 [   81.541202] ehci_hcd 0000:00:04.1: hcd_pci_runtime_resume: 0
 [   81.541212] usb usb1: usb auto-resume
 [   81.541218] ehci_hcd 0000:00:04.1: resume root hub
 [   81.582040] hub 1-0:1.0: hub_resume
 [   81.582067] hub 1-0:1.0: port 3: status 0507 change 0000
 [   81.582097] usb 1-3: usb auto-resume
 [   81.582105] hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
 [   81.608070] ehci_hcd 0000:00:04.1: GetStatus port:3 status 001005 0  ACK POWER sig=se0 PE CONNECT
 [   81.619050] usb 1-3: finish resume
 [   81.729058] ehci_hcd 0000:00:06.1: BAR 0: set to [mem 0xf9f7e800-0xf9f7e8ff] (PCI address [0xf9f7e800-0xf9f7e8ff])
 [   81.729083] ehci_hcd 0000:00:06.1: restoring config space at offset 0xf (was 0x1030200, writing 0x103020f)
 [   81.729103] ehci_hcd 0000:00:06.1: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00002)
 [   81.729151] ehci_hcd 0000:00:06.1: PME# disabled
 [   81.729174] ehci_hcd 0000:00:06.1: PCI INT B -> Link[UB12] -> GSI 22 (level, low) -> IRQ 22
 [   81.729186] ehci_hcd 0000:00:06.1: setting latency timer to 64
 [   81.729206] ehci_hcd 0000:00:06.1: hcd_pci_runtime_resume: 0
 [   81.729216] usb usb2: usb auto-resume
 [   81.729221] ehci_hcd 0000:00:06.1: resume root hub
 [   81.770049] hub 2-0:1.0: hub_resume
 [   81.770128] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
 [   81.906045] wlan0: no IPv6 routers present
 [   82.391455] EXT4-fs (sda6): re-mounted. Opts: commit=0
 [   82.398208] EXT4-fs (sda1): re-mounted. Opts: commit=0
 [  189.304778] SysRq : Keyboard mode set to system default
 [  192.742618] SysRq : SAK
 [  192.742690] SAK: killed process 3799 (X): task_session(p)==tty->session
 [  192.742914] SAK: killed process 3799 (X): task_session(p)==tty->session
 [  210.754113] SysRq : Emergency Sync
 [  210.754759] Emergency Sync complete
diff --git a/xorg.log b/xorg.log
 [    42.608] 
 X.Org X Server 1.11.3
 Release Date: 2011-12-16
 [    42.608] X Protocol Version 11, Revision 0
 [    42.608] Build Operating System: Linux 3.1.5-1-ARCH x86_64 
 [    42.608] Current Operating System: Linux papill0n 3.2.0-rc5+ #4 SMP Wed Dec 21 15:30:57 CET 2011 x86_64
 [    42.608] Kernel command line: root=/dev/sda6 ro
 [    42.608] Build Date: 17 December 2011  09:17:41AM
 [    42.608]  
 [    42.608] Current version of pixman: 0.24.0
 [    42.609] 	Before reporting problems, check http://wiki.x.org
 	to make sure that you have the latest version.
 [    42.609] Markers: (--) probed, (**) from config file, (==) default setting,
 	(++) from command line, (!!) notice, (II) informational,
 	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
 [    42.609] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 21 16:06:01 2011
 [    42.643] (==) Using config file: "/etc/xorg.conf"
 [    42.643] (==) Using config directory: "/etc/X11/xorg.conf.d"
 [    42.694] (==) ServerLayout "Layout0"
 [    42.694] (**) |-->Screen "Screen0" (0)
 [    42.694] (**) |   |-->Monitor "<default monitor>"
 [    42.695] (==) No device specified for screen "Screen0".
 	Using the first device section listed.
 [    42.695] (**) |   |-->Device "Nvidia ION"
 [    42.695] (==) No monitor specified for screen "Screen0".
 	Using a default monitor configuration.
 [    42.695] (**) Option "Xinerama" "true"
 [    42.695] (==) Automatically adding devices
 [    42.695] (==) Automatically enabling devices
 [    42.695] (**) Xinerama: enabled
 [    42.738] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
 [    42.738] 	Entry deleted from font path.
 [    42.784] (==) FontPath set to:
 	/usr/share/fonts/misc/,
 	/usr/share/fonts/TTF/,
 	/usr/share/fonts/Type1/,
 	/usr/share/fonts/100dpi/,
 	/usr/share/fonts/75dpi/
 [    42.784] (==) ModulePath set to "/usr/lib/xorg/modules"
 [    42.784] (II) The server relies on udev to provide the list of input devices.
 	If no devices become available, reconfigure udev or disable AutoAddDevices.
 [    42.784] (II) Loader magic: 0x7ccae0
 [    42.784] (II) Module ABI versions:
 [    42.784] 	X.Org ANSI C Emulation: 0.4
 [    42.784] 	X.Org Video Driver: 11.0
 [    42.784] 	X.Org XInput driver : 13.0
 [    42.784] 	X.Org Server Extension : 6.0
 [    42.786] (--) PCI:*(0:5:0:0) 10de:0876:1043:8402 rev 177, Mem @ 0xfa000000/16777216, 0xe0000000/268435456, 0xf6000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/131072
 [    42.787] (II) Open ACPI successful (/var/run/acpid.socket)
 [    42.787] (II) LoadModule: "extmod"
 [    42.814] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
 [    42.831] (II) Module extmod: vendor="X.Org Foundation"
 [    42.832] 	compiled for 1.11.3, module version = 1.0.0
 [    42.832] 	Module class: X.Org Server Extension
 [    42.832] 	ABI class: X.Org Server Extension, version 6.0
 [    42.832] (II) Loading extension MIT-SCREEN-SAVER
 [    42.832] (II) Loading extension XFree86-VidModeExtension
 [    42.832] (II) Loading extension XFree86-DGA
 [    42.832] (II) Loading extension DPMS
 [    42.832] (II) Loading extension XVideo
 [    42.832] (II) Loading extension XVideo-MotionCompensation
 [    42.832] (II) Loading extension X-Resource
 [    42.832] (II) LoadModule: "dbe"
 [    42.832] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
 [    42.839] (II) Module dbe: vendor="X.Org Foundation"
 [    42.839] 	compiled for 1.11.3, module version = 1.0.0
 [    42.839] 	Module class: X.Org Server Extension
 [    42.839] 	ABI class: X.Org Server Extension, version 6.0
 [    42.839] (II) Loading extension DOUBLE-BUFFER
 [    42.839] (II) LoadModule: "glx"
 [    42.839] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
 [    42.851] (II) Module glx: vendor="X.Org Foundation"
 [    42.851] 	compiled for 1.11.3, module version = 1.0.0
 [    42.851] 	ABI class: X.Org Server Extension, version 6.0
 [    42.851] (==) AIGLX enabled
 [    42.851] (II) Loading extension GLX
 [    42.851] (II) LoadModule: "record"
 [    42.852] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
 [    42.852] (II) Module record: vendor="X.Org Foundation"
 [    42.852] 	compiled for 1.11.3, module version = 1.13.0
 [    42.852] 	Module class: X.Org Server Extension
 [    42.853] 	ABI class: X.Org Server Extension, version 6.0
 [    42.853] (II) Loading extension RECORD
 [    42.853] (II) LoadModule: "dri"
 [    42.853] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
 [    42.867] (II) Module dri: vendor="X.Org Foundation"
 [    42.867] 	compiled for 1.11.3, module version = 1.0.0
 [    42.867] 	ABI class: X.Org Server Extension, version 6.0
 [    42.867] (II) Loading extension XFree86-DRI
 [    42.867] (II) LoadModule: "dri2"
 [    42.867] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
 [    42.868] (II) Module dri2: vendor="X.Org Foundation"
 [    42.868] 	compiled for 1.11.3, module version = 1.2.0
 [    42.868] 	ABI class: X.Org Server Extension, version 6.0
 [    42.868] (II) Loading extension DRI2
 [    42.868] (II) LoadModule: "nouveau"
 [    42.868] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
 [    42.907] (II) Module nouveau: vendor="X.Org Foundation"
 [    42.908] 	compiled for 1.11.0, module version = 0.0.16
 [    42.908] 	Module class: X.Org Video Driver
 [    42.908] 	ABI class: X.Org Video Driver, version 11.0
 [    42.908] (II) NOUVEAU driver 
 [    42.908] (II) NOUVEAU driver for NVIDIA chipset families :
 [    42.908] 	RIVA TNT        (NV04)
 [    42.908] 	RIVA TNT2       (NV05)
 [    42.908] 	GeForce 256     (NV10)
 [    42.908] 	GeForce 2       (NV11, NV15)
 [    42.908] 	GeForce 4MX     (NV17, NV18)
 [    42.908] 	GeForce 3       (NV20)
 [    42.908] 	GeForce 4Ti     (NV25, NV28)
 [    42.909] 	GeForce FX      (NV3x)
 [    42.909] 	GeForce 6       (NV4x)
 [    42.909] 	GeForce 7       (G7x)
 [    42.909] 	GeForce 8       (G8x)
 [    42.909] 	GeForce GTX 200 (NVA0)
 [    42.909] 	GeForce GTX 400 (NVC0)
 [    42.909] (--) using VT number 7

 [    42.911] drmOpenDevice: node name is /dev/dri/card0
 [    42.911] drmOpenDevice: open result is 8, (OK)
 [    42.912] drmOpenByBusid: Searching for BusID pci:0000:05:00.0
 [    42.912] drmOpenDevice: node name is /dev/dri/card0
 [    42.912] drmOpenDevice: open result is 8, (OK)
 [    42.912] drmOpenByBusid: drmOpenMinor returns 8
 [    42.912] drmOpenByBusid: drmGetBusid reports pci:0000:05:00.0
 [    42.912] (II) [drm] nouveau interface version: 0.0.16
 [    42.913] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
 [    42.913] (II) Loading sub module "dri"
 [    42.913] (II) LoadModule: "dri"
 [    42.914] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
 [    42.914] (II) Module dri: vendor="X.Org Foundation"
 [    42.914] 	compiled for 1.11.3, module version = 1.0.0
 [    42.914] 	ABI class: X.Org Server Extension, version 6.0
 [    42.914] (II) NOUVEAU(0): Loaded DRI module
 [    42.914] drmOpenDevice: node name is /dev/dri/card0
 [    42.914] drmOpenDevice: open result is 9, (OK)
 [    42.914] drmOpenDevice: node name is /dev/dri/card0
 [    42.915] drmOpenDevice: open result is 9, (OK)
 [    42.915] drmOpenByBusid: Searching for BusID pci:0000:05:00.0
 [    42.915] drmOpenDevice: node name is /dev/dri/card0
 [    42.915] drmOpenDevice: open result is 9, (OK)
 [    42.915] drmOpenByBusid: drmOpenMinor returns 9
 [    42.915] drmOpenByBusid: drmGetBusid reports pci:0000:05:00.0
 [    42.915] (II) [drm] DRM interface version 1.4
 [    42.915] (II) [drm] DRM open master succeeded.
 [    42.915] (--) NOUVEAU(0): Chipset: "NVIDIA NVac"
 [    42.915] (**) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
 [    42.915] (==) NOUVEAU(0): RGB weight 888
 [    42.916] (==) NOUVEAU(0): Default visual is TrueColor
 [    42.916] (**) NOUVEAU(0): Option "GLXVBlank" "true"
 [    42.916] (==) NOUVEAU(0): Using HW cursor
 [    42.916] (**) NOUVEAU(0): GLX sync to VBlank enabled.
 [    42.916] (==) NOUVEAU(0): Page flipping enabled
 [    43.042] (II) NOUVEAU(0): Output LVDS-1 using monitor section Laptop
 [    43.042] (**) NOUVEAU(0): Option "PreferredMode" "1366x768"
 [    43.139] (II) NOUVEAU(0): Output VGA-1 has no monitor section
 [    43.147] (II) NOUVEAU(0): Output HDMI-1 using monitor section TV Screen
 [    43.147] (**) NOUVEAU(0): Option "PreferredMode" "1920x1080"
 [    43.256] (II) NOUVEAU(0): EDID for output LVDS-1
 [    43.256] (II) NOUVEAU(0): Manufacturer: HSD  Model: 4b6  Serial#: 33703
 [    43.256] (II) NOUVEAU(0): Year: 2010  Week: 34
 [    43.256] (II) NOUVEAU(0): EDID Version: 1.3
 [    43.256] (II) NOUVEAU(0): Digital Display Input
 [    43.256] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 27  vert.: 15
 [    43.256] (II) NOUVEAU(0): Gamma: 2.20
 [    43.256] (II) NOUVEAU(0): No DPMS capabilities specified
 [    43.256] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
 [    43.256] (II) NOUVEAU(0): First detailed timing is preferred mode
 [    43.256] (II) NOUVEAU(0): redX: 0.591 redY: 0.354   greenX: 0.322 greenY: 0.547
 [    43.257] (II) NOUVEAU(0): blueX: 0.153 blueY: 0.098   whiteX: 0.313 whiteY: 0.329
 [    43.257] (II) NOUVEAU(0): Manufacturer's mask: 0
 [    43.257] (II) NOUVEAU(0): Supported detailed timing:
 [    43.257] (II) NOUVEAU(0): clock: 71.9 MHz   Image Size:  270 x 150 mm
 [    43.257] (II) NOUVEAU(0): h_active: 1366  h_sync: 1414  h_sync_end 1480 h_blank_end 1486 h_border: 0
 [    43.257] (II) NOUVEAU(0): v_active: 768  v_sync: 774  v_sync_end 782 v_blanking: 806 v_border: 0
 [    43.257] (II) NOUVEAU(0):  
 [    43.257] (II) NOUVEAU(0): Monitor name: HSD121PHW1
 [    43.257] (II) NOUVEAU(0): EDID (in hex):
 [    43.257] (II) NOUVEAU(0): 	00ffffffffffff002264b604a7830000
 [    43.257] (II) NOUVEAU(0): 	22140103801b0f780a6845975a528c27
 [    43.257] (II) NOUVEAU(0): 	19505400000001010101010101010101
 [    43.257] (II) NOUVEAU(0): 	010101010101161c5678500026303042
 [    43.257] (II) NOUVEAU(0): 	68000e9610000019000000fe00000000
 [    43.257] (II) NOUVEAU(0): 	00000000000000000000000000fc0048
 [    43.257] (II) NOUVEAU(0): 	5344313231504857310a202000000010
 [    43.257] (II) NOUVEAU(0): 	000a2020202020202020202020200008
 [    43.257] (II) NOUVEAU(0): EDID vendor "HSD", prod id 1206
 [    43.257] (II) NOUVEAU(0): Printing DDC gathered Modelines:
 [    43.257] (II) NOUVEAU(0): Modeline "1366x768"x0.0   71.90  1366 1414 1480 1486  768 774 782 806 -hsync -vsync (48.4 kHz)
 [    43.258] (II) NOUVEAU(0): Printing probed modes for output LVDS-1
 [    43.258] (II) NOUVEAU(0): Modeline "1366x768"x60.0   71.90  1366 1414 1480 1486  768 774 782 806 -hsync -vsync (48.4 kHz)
 [    43.258] (II) NOUVEAU(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
 [    43.258] (II) NOUVEAU(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
 [    43.258] (II) NOUVEAU(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz)
 [    43.258] (II) NOUVEAU(0): Modeline "720x400"x59.6   22.25  720 744 808 896  400 403 413 417 -hsync +vsync (24.8 kHz)
 [    43.258] (II) NOUVEAU(0): Modeline "640x400"x60.0   20.00  640 664 720 800  400 403 409 417 -hsync +vsync (25.0 kHz)
 [    43.258] (II) NOUVEAU(0): Modeline "640x350"x59.8   17.50  640 664 720 800  350 353 363 366 -hsync +vsync (21.9 kHz)
 [    43.356] (II) NOUVEAU(0): EDID for output VGA-1
 [    43.363] (II) NOUVEAU(0): EDID for output HDMI-1
 [    43.363] (II) NOUVEAU(0): Output LVDS-1 connected
 [    43.363] (II) NOUVEAU(0): Output VGA-1 disconnected
 [    43.363] (II) NOUVEAU(0): Output HDMI-1 disconnected
 [    43.363] (II) NOUVEAU(0): Using user preference for initial modes
 [    43.363] (II) NOUVEAU(0): Output LVDS-1 using initial mode 1366x768
 [    43.363] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
 [    43.363] (--) NOUVEAU(0): Virtual size is 3286x1080 (pitch 0)
 [    43.363] (**) NOUVEAU(0):  Driver mode "1366x768": 71.9 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
 [    43.364] (II) NOUVEAU(0): Modeline "1366x768"x60.0   71.90  1366 1414 1480 1486  768 774 782 806 -hsync -vsync (48.4 kHz)
 [    43.364] (**) NOUVEAU(0):  Driver mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
 [    43.364] (II) NOUVEAU(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
 [    43.364] (**) NOUVEAU(0):  Driver mode "800x600": 38.2 MHz (scaled from 0.0 MHz), 37.4 kHz, 59.9 Hz
 [    43.364] (II) NOUVEAU(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
 [    43.364] (**) NOUVEAU(0):  Driver mode "640x480": 23.8 MHz (scaled from 0.0 MHz), 29.7 kHz, 59.4 Hz
 [    43.364] (II) NOUVEAU(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz)
 [    43.364] (**) NOUVEAU(0):  Driver mode "720x400": 22.2 MHz (scaled from 0.0 MHz), 24.8 kHz, 59.6 Hz
 [    43.364] (II) NOUVEAU(0): Modeline "720x400"x59.6   22.25  720 744 808 896  400 403 413 417 -hsync +vsync (24.8 kHz)
 [    43.364] (**) NOUVEAU(0):  Driver mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz
 [    43.364] (II) NOUVEAU(0): Modeline "640x400"x60.0   20.00  640 664 720 800  400 403 409 417 -hsync +vsync (25.0 kHz)
 [    43.364] (**) NOUVEAU(0):  Driver mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz
 [    43.364] (II) NOUVEAU(0): Modeline "640x350"x59.8   17.50  640 664 720 800  350 353 363 366 -hsync +vsync (21.9 kHz)
 [    43.364] (**) NOUVEAU(0): Display dimensions: (270, 150) mm
 [    43.364] (**) NOUVEAU(0): DPI set to (309, 182)
 [    43.364] (II) Loading sub module "fb"
 [    43.364] (II) LoadModule: "fb"
 [    43.365] (II) Loading /usr/lib/xorg/modules/libfb.so
 [    43.386] (II) Module fb: vendor="X.Org Foundation"
 [    43.386] 	compiled for 1.11.3, module version = 1.0.0
 [    43.386] 	ABI class: X.Org ANSI C Emulation, version 0.4
 [    43.386] (II) Loading sub module "exa"
 [    43.386] (II) LoadModule: "exa"
 [    43.387] (II) Loading /usr/lib/xorg/modules/libexa.so
 [    43.394] (II) Module exa: vendor="X.Org Foundation"
 [    43.394] 	compiled for 1.11.3, module version = 2.5.0
 [    43.394] 	ABI class: X.Org Video Driver, version 11.0
 [    43.395] (II) Loading sub module "shadowfb"
 [    43.395] (II) LoadModule: "shadowfb"
 [    43.395] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
 [    43.395] (II) Module shadowfb: vendor="X.Org Foundation"
 [    43.396] 	compiled for 1.11.3, module version = 1.0.0
 [    43.396] 	ABI class: X.Org ANSI C Emulation, version 0.4
 [    43.396] (--) Depth 24 pixmap format is 32 bpp
 [    43.402] (II) NOUVEAU(0): Opened GPU channel 2
 [    43.402] (II) NOUVEAU(0): [DRI2] Setup complete
 [    43.403] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
 [    43.404] (II) NOUVEAU(0): GART: 64MiB available
 [    43.420] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
 [    43.421] (II) EXA(0): Driver allocated offscreen pixmaps
 [    43.421] (II) EXA(0): Driver registered support for the following operations:
 [    43.421] (II)         Solid
 [    43.421] (II)         Copy
 [    43.421] (II)         Composite (RENDER acceleration)
 [    43.421] (II)         UploadToScreen
 [    43.421] (II)         DownloadFromScreen
 [    43.421] (==) NOUVEAU(0): Backing store disabled
 [    43.421] (==) NOUVEAU(0): Silken mouse enabled
 [    43.421] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
 [    43.421] (II) NOUVEAU(0): [XvMC] Extension initialized.
 [    43.421] (==) NOUVEAU(0): DPMS enabled
 [    43.422] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
 [    43.422] (--) RandR disabled
 [    43.422] (II) Initializing built-in extension Generic Event Extension
 [    43.422] (II) Initializing built-in extension SHAPE
 [    43.422] (II) Initializing built-in extension MIT-SHM
 [    43.423] (II) Initializing built-in extension XInputExtension
 [    43.423] (II) Initializing built-in extension XTEST
 [    43.423] (II) Initializing built-in extension BIG-REQUESTS
 [    43.423] (II) Initializing built-in extension SYNC
 [    43.423] (II) Initializing built-in extension XKEYBOARD
 [    43.423] (II) Initializing built-in extension XC-MISC
 [    43.423] (II) Initializing built-in extension SECURITY
 [    43.423] (II) Initializing built-in extension XINERAMA
 [    43.423] (II) Initializing built-in extension XFIXES
 [    43.423] (II) Initializing built-in extension RENDER
 [    43.423] (II) Initializing built-in extension RANDR
 [    43.423] (II) Initializing built-in extension COMPOSITE
 [    43.423] (II) Initializing built-in extension DAMAGE
 [    43.752] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
 [    43.752] (II) AIGLX: enabled GLX_INTEL_swap_event
 [    43.752] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
 [    43.752] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
 [    43.755] (II) AIGLX: Loaded and initialized nouveau
 [    43.755] (II) GLX: Initialized DRI2 GL provider for screen 0
 [    43.764] (II) NOUVEAU(0): NVEnterVT is called.
 [    43.798] (II) NOUVEAU(0): Setting screen physical size to 361 x 203
 [    43.798] resize called 1366 768
 [    44.443] (II) config/udev: Adding input device Power Button (/dev/input/event3)
 [    44.443] (**) Power Button: Applying InputClass "evdev keyboard catchall"
 [    44.443] (II) LoadModule: "evdev"
 [    44.458] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
 [    44.470] (II) Module evdev: vendor="X.Org Foundation"
 [    44.470] 	compiled for 1.10.99.902, module version = 2.6.0
 [    44.470] 	Module class: X.Org XInput Driver
 [    44.470] 	ABI class: X.Org XInput driver, version 13.0
 [    44.470] (II) Using input driver 'evdev' for 'Power Button'
 [    44.470] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
 [    44.470] (**) Power Button: always reports core events
 [    44.470] (**) Power Button: Device: "/dev/input/event3"
 [    44.471] (--) Power Button: Found keys
 [    44.471] (II) Power Button: Configuring as keyboard
 [    44.471] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
 [    44.471] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
 [    44.471] (**) Option "xkb_rules" "evdev"
 [    44.471] (**) Option "xkb_model" "evdev"
 [    44.471] (**) Option "xkb_layout" "us"
 [    44.564] (II) config/udev: Adding input device Power Button (/dev/input/event2)
 [    44.564] (**) Power Button: Applying InputClass "evdev keyboard catchall"
 [    44.564] (II) Using input driver 'evdev' for 'Power Button'
 [    44.564] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
 [    44.564] (**) Power Button: always reports core events
 [    44.564] (**) Power Button: Device: "/dev/input/event2"
 [    44.564] (--) Power Button: Found keys
 [    44.564] (II) Power Button: Configuring as keyboard
 [    44.564] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
 [    44.564] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
 [    44.564] (**) Option "xkb_rules" "evdev"
 [    44.564] (**) Option "xkb_model" "evdev"
 [    44.564] (**) Option "xkb_layout" "us"
 [    44.566] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
 [    44.566] (II) No input driver/identifier specified (ignoring)
 [    44.567] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
 [    44.567] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
 [    44.567] (II) Using input driver 'evdev' for 'Sleep Button'
 [    44.567] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
 [    44.567] (**) Sleep Button: always reports core events
 [    44.567] (**) Sleep Button: Device: "/dev/input/event1"
 [    44.567] (--) Sleep Button: Found keys
 [    44.567] (II) Sleep Button: Configuring as keyboard
 [    44.567] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
 [    44.567] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
 [    44.567] (**) Option "xkb_rules" "evdev"
 [    44.567] (**) Option "xkb_model" "evdev"
 [    44.567] (**) Option "xkb_layout" "us"
 [    44.569] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event7)
 [    44.569] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
 [    44.569] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
 [    44.569] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
 [    44.569] (**) Logitech USB Receiver: always reports core events
 [    44.569] (**) Logitech USB Receiver: Device: "/dev/input/event7"
 [    44.569] (--) Logitech USB Receiver: Found 20 mouse buttons
 [    44.569] (--) Logitech USB Receiver: Found scroll wheel(s)
 [    44.569] (--) Logitech USB Receiver: Found relative axes
 [    44.570] (--) Logitech USB Receiver: Found x and y relative axes
 [    44.570] (II) Logitech USB Receiver: Configuring as mouse
 [    44.570] (II) Logitech USB Receiver: Adding scrollwheel support
 [    44.570] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
 [    44.570] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
 [    44.570] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb3/3-1/3-1:1.0/input/input7/event7"
 [    44.570] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 9)
 [    44.570] (II) Logitech USB Receiver: initialized for relative axes.
 [    44.571] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
 [    44.571] (**) Logitech USB Receiver: (accel) acceleration profile 0
 [    44.571] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
 [    44.571] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
 [    44.572] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse1)
 [    44.572] (II) No input driver/identifier specified (ignoring)
 [    44.573] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event8)
 [    44.573] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
 [    44.573] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
 [    44.573] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
 [    44.573] (**) Logitech USB Receiver: always reports core events
 [    44.573] (**) Logitech USB Receiver: Device: "/dev/input/event8"
 [    44.573] (--) Logitech USB Receiver: Found 1 mouse buttons
 [    44.573] (--) Logitech USB Receiver: Found scroll wheel(s)
 [    44.573] (--) Logitech USB Receiver: Found relative axes
 [    44.573] (--) Logitech USB Receiver: Found absolute axes
 [    44.573] (--) Logitech USB Receiver: Found keys
 [    44.573] (II) Logitech USB Receiver: Configuring as mouse
 [    44.573] (II) Logitech USB Receiver: Configuring as keyboard
 [    44.573] (II) Logitech USB Receiver: Adding scrollwheel support
 [    44.573] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
 [    44.573] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
 [    44.574] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb3/3-1/3-1:1.1/input/input8/event8"
 [    44.574] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 10)
 [    44.574] (**) Option "xkb_rules" "evdev"
 [    44.574] (**) Option "xkb_model" "evdev"
 [    44.574] (**) Option "xkb_layout" "us"
 [    44.574] (EE) Logitech USB Receiver: failed to initialize for relative axes.
 [    44.574] (II) Logitech USB Receiver: initialized for absolute axes.
 [    44.575] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
 [    44.575] (**) Logitech USB Receiver: (accel) acceleration profile 0
 [    44.575] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
 [    44.575] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
 [    44.576] (II) config/udev: Adding input device USB 2.0 PC Cam (/dev/input/event9)
 [    44.576] (**) USB 2.0 PC Cam: Applying InputClass "evdev keyboard catchall"
 [    44.576] (II) Using input driver 'evdev' for 'USB 2.0 PC Cam'
 [    44.576] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
 [    44.576] (**) USB 2.0 PC Cam: always reports core events
 [    44.576] (**) USB 2.0 PC Cam: Device: "/dev/input/event9"
 [    44.577] (--) USB 2.0 PC Cam: Found keys
 [    44.577] (II) USB 2.0 PC Cam: Configuring as keyboard
 [    44.577] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.1/usb1/1-3/1-3:1.0/input/input9/event9"
 [    44.577] (II) XINPUT: Adding extended input device "USB 2.0 PC Cam" (type: KEYBOARD, id 11)
 [    44.577] (**) Option "xkb_rules" "evdev"
 [    44.577] (**) Option "xkb_model" "evdev"
 [    44.577] (**) Option "xkb_layout" "us"
 [    44.578] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event5)
 [    44.578] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
 [    44.578] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
 [    44.578] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
 [    44.579] (**) Eee PC WMI hotkeys: always reports core events
 [    44.579] (**) Eee PC WMI hotkeys: Device: "/dev/input/event5"
 [    44.579] (--) Eee PC WMI hotkeys: Found keys
 [    44.579] (II) Eee PC WMI hotkeys: Configuring as keyboard
 [    44.579] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input5/event5"
 [    44.579] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 12)
 [    44.579] (**) Option "xkb_rules" "evdev"
 [    44.579] (**) Option "xkb_model" "evdev"
 [    44.579] (**) Option "xkb_layout" "us"
 [    44.580] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
 [    44.581] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
 [    44.581] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
 [    44.581] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
 [    44.581] (**) AT Translated Set 2 keyboard: always reports core events
 [    44.581] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
 [    44.581] (--) AT Translated Set 2 keyboard: Found keys
 [    44.581] (II) AT Translated Set 2 keyboard: Configuring as keyboard
 [    44.581] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
 [    44.581] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
 [    44.581] (**) Option "xkb_rules" "evdev"
 [    44.581] (**) Option "xkb_model" "evdev"
 [    44.581] (**) Option "xkb_layout" "us"
 [    44.583] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
 [    44.583] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
 [    44.583] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
 [    44.583] (II) LoadModule: "synaptics"
 [    44.583] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
 [    44.588] (II) Module synaptics: vendor="X.Org Foundation"
 [    44.588] 	compiled for 1.11.0, module version = 1.5.0
 [    44.588] 	Module class: X.Org XInput Driver
 [    44.588] 	ABI class: X.Org XInput driver, version 13.0
 [    44.588] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
 [    44.588] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
 [    44.588] (**) SynPS/2 Synaptics TouchPad: always reports core events
 [    44.588] (**) Option "Device" "/dev/input/event6"
 [    44.609] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5624
 [    44.609] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4754
 [    44.609] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
 [    44.609] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 0
 [    44.609] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
 [    44.609] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
 [    44.609] (**) Option "VertEdgeScroll" "on"
 [    44.609] (**) Option "HorizEdgeScroll" "on"
 [    44.609] (**) Option "TapButton1" "1"
 [    44.609] (**) Option "TapButton2" "2"
 [    44.609] (**) Option "TapButton3" "3"
 [    44.610] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
 [    44.610] (**) SynPS/2 Synaptics TouchPad: always reports core events
 [    44.610] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
 [    44.610] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
 [    44.610] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
 [    44.610] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
 [    44.610] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038
 [    44.611] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
 [    44.611] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
 [    44.611] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
 [    44.611] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
 [    44.611] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
 [    44.612] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
 [    44.612] (II) No input driver/identifier specified (ignoring)
 [    59.613] (II) config/udev: removing device USB 2.0 PC Cam
 [    59.613] (II) USB 2.0 PC Cam: Close
 [    59.613] (II) UnloadModule: "evdev"
 [    59.613] (II) Unloading evdev
 [    59.692] (II) config/udev: removing device Logitech USB Receiver
 [    59.692] (II) Logitech USB Receiver: Close
 [    59.692] (II) UnloadModule: "evdev"
 [    59.692] (II) Unloading evdev
 [    59.704] (II) config/udev: removing device Logitech USB Receiver
 [    59.704] (II) Logitech USB Receiver: Close
 [    59.704] (II) UnloadModule: "evdev"
 [    59.704] (II) Unloading evdev
 [    60.611] (II) AIGLX: Suspending AIGLX clients for VT switch
 [    60.611] (II) NOUVEAU(0): NVLeaveVT is called.
 [    64.163] (II) Open ACPI successful (/var/run/acpid.socket)
 [    64.163] (II) AIGLX: Resuming AIGLX clients after VT switch
 [    64.163] (II) NOUVEAU(0): NVEnterVT is called.
 [    64.291] (II) NOUVEAU(0): EDID vendor "HSD", prod id 1206
 [    64.291] (II) NOUVEAU(0): Printing DDC gathered Modelines:
 [    64.291] (II) NOUVEAU(0): Modeline "1366x768"x0.0   71.90  1366 1414 1480 1486  768 774 782 806 -hsync -vsync (48.4 kHz)
 [    64.399] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
 [    65.359] (II) config/udev: Adding input device USB 2.0 PC Cam (/dev/input/event7)
 [    65.359] (**) USB 2.0 PC Cam: Applying InputClass "evdev keyboard catchall"
 [    65.359] (II) Using input driver 'evdev' for 'USB 2.0 PC Cam'
 [    65.360] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
 [    65.360] (**) USB 2.0 PC Cam: always reports core events
 [    65.360] (**) USB 2.0 PC Cam: Device: "/dev/input/event7"
 [    65.363] (--) USB 2.0 PC Cam: Found keys
 [    65.363] (II) USB 2.0 PC Cam: Configuring as keyboard
 [    65.363] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.1/usb1/1-3/1-3:1.0/input/input10/event7"
 [    65.363] (II) XINPUT: Adding extended input device "USB 2.0 PC Cam" (type: KEYBOARD, id 9)
 [    65.363] (**) Option "xkb_rules" "evdev"
 [    65.363] (**) Option "xkb_model" "evdev"
 [    65.363] (**) Option "xkb_layout" "us"
 [    65.889] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse1)
 [    65.889] (II) No input driver/identifier specified (ignoring)
 [    65.890] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event8)
 [    65.890] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
 [    65.891] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
 [    65.891] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
 [    65.891] (**) Logitech USB Receiver: always reports core events
 [    65.891] (**) Logitech USB Receiver: Device: "/dev/input/event8"
 [    66.009] (--) Logitech USB Receiver: Found 20 mouse buttons
 [    66.009] (--) Logitech USB Receiver: Found scroll wheel(s)
 [    66.009] (--) Logitech USB Receiver: Found relative axes
 [    66.009] (--) Logitech USB Receiver: Found x and y relative axes
 [    66.009] (II) Logitech USB Receiver: Configuring as mouse
 [    66.009] (II) Logitech USB Receiver: Adding scrollwheel support
 [    66.009] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
 [    66.009] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
 [    66.009] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb3/3-1/3-1:1.0/input/input11/event8"
 [    66.009] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
 [    66.009] (II) Logitech USB Receiver: initialized for relative axes.
 [    66.010] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
 [    66.010] (**) Logitech USB Receiver: (accel) acceleration profile 0
 [    66.010] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
 [    66.010] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
 [    66.026] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event9)
 [    66.027] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
 [    66.027] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
 [    66.027] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
 [    66.027] (**) Logitech USB Receiver: always reports core events
 [    66.027] (**) Logitech USB Receiver: Device: "/dev/input/event9"
 [    66.027] (--) Logitech USB Receiver: Found 1 mouse buttons
 [    66.027] (--) Logitech USB Receiver: Found scroll wheel(s)
 [    66.027] (--) Logitech USB Receiver: Found relative axes
 [    66.027] (--) Logitech USB Receiver: Found absolute axes
 [    66.027] (--) Logitech USB Receiver: Found keys
 [    66.027] (II) Logitech USB Receiver: Configuring as mouse
 [    66.027] (II) Logitech USB Receiver: Configuring as keyboard
 [    66.027] (II) Logitech USB Receiver: Adding scrollwheel support
 [    66.027] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
 [    66.027] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
 [    66.027] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb3/3-1/3-1:1.1/input/input12/event9"
 [    66.027] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
 [    66.027] (**) Option "xkb_rules" "evdev"
 [    66.028] (**) Option "xkb_model" "evdev"
 [    66.028] (**) Option "xkb_layout" "us"
 [    66.028] (EE) Logitech USB Receiver: failed to initialize for relative axes.
 [    66.028] (II) Logitech USB Receiver: initialized for absolute axes.
 [    66.029] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
 [    66.029] (**) Logitech USB Receiver: (accel) acceleration profile 0
 [    66.029] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
 [    66.029] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
 [   185.151] [mi] EQ overflowing. The server is probably stuck in an infinite loop.
 [   185.151] 
 Backtrace:
 [   185.151] 0: /usr/bin/X (xorg_backtrace+0x26) [0x566a86]
 [   185.151] 1: /usr/bin/X (mieqEnqueue+0x191) [0x547391]
 [   185.151] 2: /usr/bin/X (0x400000+0x46f54) [0x446f54]
 [   185.152] 3: /usr/bin/X (xf86PostKeyboardEvent+0x4b) [0x4821cb]
 [   185.152] 4: /usr/lib/xorg/modules/input/evdev_drv.so (0x7f6570f5a000+0x481e) [0x7f6570f5e81e]
 [   185.152] 5: /usr/bin/X (0x400000+0x6ca07) [0x46ca07]
 [   185.152] 6: /usr/bin/X (0x400000+0x925fe) [0x4925fe]
 [   185.152] 7: /lib/libpthread.so.0 (0x7f657606d000+0xf850) [0x7f657607c850]
 [   185.152] 8: /lib/libc.so.6 (ioctl+0x7) [0x7f657505e747]
 [   185.152] 9: /usr/lib/libdrm.so.2 (drmIoctl+0x28) [0x7f657360a7a8]
 [   185.152] 10: /usr/lib/libdrm.so.2 (drmCommandWrite+0x1b) [0x7f657360ca9b]
 [   185.152] 11: /usr/lib/libdrm_nouveau.so.1 (0x7f6572fbc000+0x3007) [0x7f6572fbf007]
 [   185.152] 12: /usr/lib/libdrm_nouveau.so.1 (nouveau_bo_map_range+0x109) [0x7f6572fbf629]
 [   185.152] 13: /usr/lib/xorg/modules/drivers/nouveau_drv.so (0x7f65731c2000+0x6e9b) [0x7f65731c8e9b]
 [   185.153] 14: /usr/lib/xorg/modules/libexa.so (0x7f6572b81000+0x5c17) [0x7f6572b86c17]
 [   185.153] 15: /usr/lib/xorg/modules/libexa.so (0x7f6572b81000+0x8310) [0x7f6572b89310]
 [   185.153] 16: /usr/lib/xorg/modules/libexa.so (0x7f6572b81000+0x11e4c) [0x7f6572b92e4c]
 [   185.153] 17: /usr/bin/X (0x400000+0xf6e96) [0x4f6e96]
 [   185.153] 18: /usr/bin/X (0x400000+0xf8766) [0x4f8766]
 [   185.153] 19: /usr/bin/X (doPolyText+0x373) [0x435d13]
 [   185.153] 20: /usr/bin/X (PolyText+0x49) [0x436c89]
 [   185.153] 21: /usr/bin/X (0x400000+0x31157) [0x431157]
 [   185.153] 22: /usr/bin/X (0x400000+0x33cb9) [0x433cb9]
 [   185.154] 23: /usr/bin/X (0x400000+0x22eea) [0x422eea]
 [   185.154] 24: /lib/libc.so.6 (__libc_start_main+0xed) [0x7f6574fb214d]
 [   185.154] 25: /usr/bin/X (0x400000+0x231dd) [0x4231dd]