fernandoaleman

# How to create an RPM repository

# This is for Redhat 64 bit versions of Linux. You can create your own RPM repository # to host your custom RPM packages.
#
# See "How to create an RPM from source with spec file" for more information.
# https://gist.github.com/1376973

# Step: 1
# Install createrepo

vertexclique

MacOS

Build 3059

MD5: 59bab8f71f8c096cd3f72cd73851515d

Rename it to: Sublime Text

Make it executable with: chmod u+x Sublime\ Text

application2000

These commands are based on a askubuntu answer http://askubuntu.com/a/581497
To install gcc-6 (gcc-6.1.1), I had to do more stuff as shown below.
USE THOSE COMMANDS AT YOUR OWN RISK. I SHALL NOT BE RESPONSIBLE FOR ANYTHING.
ABSOLUTELY NO WARRANTY.

If you are still reading let's carry on with the code.

sudo apt-get update && \
sudo apt-get install build-essential software-properties-common -y && \
sudo add-apt-repository ppa:ubuntu-toolchain-r/test -y && \

Brainiarc7

Reddit post

Table of Content

• What to expect?
  • Some TLDR about the idea behind
• Prerequisites
  • Hardware
  • System & Software
• Update: Attention for MUXless laptop

Brainiarc7

To limit a CPU to a certain C-state, you can pass the processor.max_cstate=X option in the kernel line of /boot/grub/grub.conf.

Here we limit the system to only C-State 1:

    kernel /vmlinuz-2.6.18-371.1.2.el5 ... processor.max_cstate=1

On some systems, the kernel can override the BIOS setting, and the parameter intel_idle.max_cstate=0 may be required to ensure sleep states are not entered:

mariusvniekerk