Calamares 1.0.1.10-2: umountall module umounts all mounts after crash

cal10110_2_umountall_after_crash

[manjaro@manjaro Desktop]$ pacman -Q calamares
calamares 1.0.1.10-2
[manjaro@manjaro Desktop]$ sudo calamares -v

(calamares:1213): Gtk-WARNING **: Unable to locate theme engine in module_path: "adwaita",

(calamares:1213): Gtk-WARNING **: Unable to locate theme engine in module_path: "adwaita",
Translation: Calamares: Using system locale: "en_US"
Translation: Qt: Using default locale, system locale one not found: "en_US"
00:21:41 [1]: Default font ===== 
Pixel size:    -1 
Point size:    10 
Point sizeF:   10 
Font family:   "Cantarell" 
Metric height: 18 
00:21:41 [1]: Font height: 18 
00:21:41 [1]: Available languages: ("ar", "ast", "ca", "cs_CZ", "da", "de", "en", "es_MX", "es", "fi_FI", "fr", "hr", "hu", "id", "it_IT", "ja", "lt", "nl", "pl", "pt_BR", "pt_PT", "ro", "ru", "sk", "sl", "sv", "tr_TR", "zh_CN", "zh_TW") 
Calamares 1.0.1.10
[manjaro@manjaro Desktop]$ sudo calamares -d

(calamares:1232): Gtk-WARNING **: Unable to locate theme engine in module_path: "adwaita",

(calamares:1232): Gtk-WARNING **: Unable to locate theme engine in module_path: "adwaita",
Translation: Calamares: Using system locale: "en_US"
Translation: Qt: Using default locale, system locale one not found: "en_US"
00:21:44 [1]: Default font ===== 
Pixel size:    -1 
Point size:    10 
Point sizeF:   10 
Font family:   "Cantarell" 
Metric height: 18 
00:21:44 [1]: Font height: 18 
00:21:44 [1]: Available languages: ("ar", "ast", "ca", "cs_CZ", "da", "de", "en", "es_MX", "es", "fi_FI", "fr", "hr", "hu", "id", "it_IT", "ja", "lt", "nl", "pl", "pt_BR", "pt_PT", "ro", "ru", "sk", "sl", "sv", "tr_TR", "zh_CN", "zh_TW") 
00:21:44 [1]: CalamaresApplication thread: 0x9594168 
00:21:44 [1]: Using Calamares settings file at "/usr/share/calamares/settings.conf" 
00:21:44 [1]: Using Calamares branding file at "/usr/share/calamares/branding/manjaro/branding.desc" 
00:21:44 [1]: Loaded branding component "manjaro" 
00:21:45 [1]: Loading module.desc for "bootloader" 
00:21:45 [1]: Loading module.desc for "displaymanager" 
00:21:45 [1]: Loading module.desc for "dracut" 
00:21:45 [1]: Loading module.desc for "finished" 
00:21:45 [1]: Loading module.desc for "fstab" 
00:21:45 [1]: Loading module.desc for "greeting" 
00:21:45 [1]: Loading module.desc for "grubcfg" 
00:21:45 [1]: Loading module.desc for "hardwarecfg" 
00:21:45 [1]: Loading module.desc for "hwclock" 
00:21:45 [1]: Loading module.desc for "initcpio" 
00:21:45 [1]: Loading module.desc for "initcpiocfg" 
00:21:45 [1]: Loading module.desc for "initramfs" 
00:21:45 [1]: Loading module.desc for "keyboard" 
00:21:45 [1]: Loading module.desc for "locale" 
00:21:45 [1]: Loading module.desc for "localecfg" 
00:21:45 [1]: Loading module.desc for "localegen" 
00:21:45 [1]: Loading module.desc for "machineid" 
00:21:45 [1]: Loading module.desc for "mount" 
00:21:45 [1]: Loading module.desc for "networkcfg" 
00:21:45 [1]: Loading module.desc for "packages" 
00:21:45 [1]: Loading module.desc for "partition" 
00:21:45 [1]: Loading module.desc for "postcfg" 
00:21:45 [1]: Loading module.desc for "prepare" 
00:21:45 [1]: Loading module.desc for "services" 
00:21:45 [1]: Loading module.desc for "summary" 
00:21:45 [1]: Loading module.desc for "umount" 
00:21:45 [1]: Loading module.desc for "umountall" 
00:21:45 [1]: Loading module.desc for "unpackfs" 
00:21:45 [1]: Loading module.desc for "users" 
00:21:45 [1]: Proposed window size: 1024 648 
libGL error: pci id for fd 13: 80ee:beef, driver (null)
libGL error: core dri or dri2 extension not found
libGL error: failed to load driver: vboxvideo
00:21:46 [1]: QML import paths: ("/usr/share/calamares/qml", "/usr/bin", "/usr/lib/qt/qml") 
00:21:46 [1]: Initial locale  "en_US" 
00:21:46 [8]: Translation: Calamares: Using system locale: "en_US"
00:21:46 [8]: Translation: Qt: Using default locale, system locale one not found: "en_US"
No layout variant specified on the command line
Trailing -variant option ignored
00:21:48 [1]: xkbmap selection changed to:  "us" - "" 
00:21:50 [8]: getting smart status failed for  "/dev/sda" :  Operation not supported
00:21:51 [0]: QFileInfo::absolutePath: Constructed with empty filename
00:21:51 [0]: QFileInfo::absolutePath: Constructed with empty filename
00:21:51 [8]: getting smart status failed for  "/dev/sr0" :  Operation not supported
00:21:52 [1]: Need at least storage bytes: 5905580032 
00:21:52 [1]: Need at least ram bytes: 1073741824 
00:21:52 [1]: enoughStorage, enoughRam, hasPower, hasInternet:  true true true true 
00:21:55 [1]: checking if "/dev/sda2" can be resized. 
00:21:55 [1]: "/dev/sda2" seems like a good path 
00:21:55 [1]: found Partition* for "/dev/sda2" 
00:21:55 [1]: Required  storage B: 8160437862 
00:21:55 [1]: Available storage B: 3181513801728 
00:21:55 [1]: Partition "/dev/sda2" authorized for resize + autopartition install. 
00:21:55 [1]: "Osprober lines, clean:
/dev/sda2:Manjaro Linux (0.9.0-dev):ManjaroLinux:linux" 
00:21:55 [1]: Current index changed: "/dev/sda2" 
00:21:55 [1]: PSI added item "/dev/sda1" size 615514112 
00:21:55 [1]: PSI added item "/dev/sda2" size 6462373888 
00:21:55 [1]: PSI added item "/dev/sda3" size 1508238848 
00:21:55 [1]: PSI added item "" size 2742272 
00:21:55 [1]: void PartitionSplitterWidget::setSplitPartition(const QString&, qint64, qint64, qint64, const QString&) path: "/dev/sda2" 
minSize: 273327718 
maxSize: -1698063974 
prfSize: 3231186944 
00:21:55 [1]: itemToResize: "/dev/sda2" 
00:21:55 [1]: Items updated. Status: 
00:21:55 [1]: item "/dev/sda1" size 615514112 
00:21:55 [1]: item "/dev/sda2" size -1698063974 
00:21:55 [1]: item "" size 8160437862 
00:21:55 [1]: item "/dev/sda3" size 1508238848 
00:21:55 [1]: item "" size 2742272 
00:22:03 [1]: Choice applied:  4 
00:22:17 [8]: getting smart status failed for  "/dev/sda" :  Operation not supported
00:22:18 [0]: QFileInfo::absolutePath: Constructed with empty filename
00:22:18 [0]: QFileInfo::absolutePath: Constructed with empty filename
00:22:21 [1]: Module "partition" already loaded. 
00:22:21 [1]: Module "locale" already loaded. 
00:22:21 [1]: Module "keyboard" already loaded. 
00:22:21 [1]: Module "users" already loaded. 
00:22:21 [1]: PartitionCodeModule has been asked for jobs. About to return: "Clear mounts for partitioning operations on /dev/sda
Format partition /dev/sda2 (file system: ext4, size: 6163 MB) on ATA VBOX HARDDISK.
Set partition information" 
00:22:21 [0]: Starting job "Run script umountall/main.py" 
00:22:21 [0]: Starting job "Clear mounts for partitioning operations on /dev/sda" 
00:22:21 [1]: ClearMountsJob finished. Here's what was done:
 "" 
00:22:21 [0]: Starting job "Format partition /dev/sda2 (file system: ext4, size: 6163 MB) on ATA VBOX HARDDISK." 
00:22:26 [0]: Starting job "Set partition information" 
00:22:26 [0]: Starting job "Run script mount/main.py" 
00:22:27 [0]: Starting job "Run script unpackfs/main.py" 
rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at rsync.c(632) [sender=3.1.1]
rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at io.c(504) [generator=3.1.1]
00:22:36 [0]: Installation failed: 
00:22:36 [0]: - message: "Failed to unpack image /bootmnt/manjaro/i686/root-image.sqfs" 
00:22:36 [0]: - details: "rsync failed with error code 20." 
00:22:40 [8]: Shutting down Calamares... 
00:22:40 [8]: Finished shutdown. 
00:22:40 [0]: QBasicTimer::start: QBasicTimer can only be used with threads started with QThread
00:22:40 [0]: QBasicTimer::start: QBasicTimer can only be used with threads started with QThread
00:22:40 [0]: QBasicTimer::start: QBasicTimer can only be used with threads started with QThread
00:22:40 [0]: QBasicTimer::start: QBasicTimer can only be used with threads started with QThread
00:22:40 [0]: QBasicTimer::start: QBasicTimer can only be used with threads started with QThread
00:22:40 [0]: QBasicTimer::start: QBasicTimer can only be used with threads started with QThread
00:22:40 [0]: QBasicTimer::start: QBasicTimer can only be used with threads started with QThread
00:22:40 [0]: QBasicTimer::start: QBasicTimer can only be used with threads started with QThread
00:22:40 [0]: QBasicTimer::start: QBasicTimer can only be used with threads started with QThread
00:22:40 [0]: QBasicTimer::start: QBasicTimer can only be used with threads started with QThread
[manjaro@manjaro Desktop]$ cat /etc/mtab
proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
sys /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
dev /dev devtmpfs rw,nosuid,relatime,size=1026004k,nr_inodes=216056,mode=755 0 0
run /run tmpfs rw,nosuid,nodev,relatime,mode=755 0 0
union / aufs rw,relatime,si=a0ebfabc 0 0
/dev/sr0 /bootmnt iso9660 ro,noatime 0 0
securityfs /sys/kernel/security securityfs rw,nosuid,nodev,noexec,relatime 0 0
tmpfs /dev/shm tmpfs rw,nosuid,nodev 0 0
devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0
tmpfs /sys/fs/cgroup tmpfs ro,nosuid,nodev,noexec,mode=755 0 0
cgroup /sys/fs/cgroup/systemd cgroup rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/usr/lib/systemd/systemd-cgroups-agent,name=systemd 0 0
pstore /sys/fs/pstore pstore rw,nosuid,nodev,noexec,relatime 0 0
cgroup /sys/fs/cgroup/freezer cgroup rw,nosuid,nodev,noexec,relatime,freezer 0 0
cgroup /sys/fs/cgroup/blkio cgroup rw,nosuid,nodev,noexec,relatime,blkio 0 0
cgroup /sys/fs/cgroup/devices cgroup rw,nosuid,nodev,noexec,relatime,devices 0 0
cgroup /sys/fs/cgroup/memory cgroup rw,nosuid,nodev,noexec,relatime,memory 0 0
cgroup /sys/fs/cgroup/net_cls cgroup rw,nosuid,nodev,noexec,relatime,net_cls 0 0
cgroup /sys/fs/cgroup/cpu,cpuacct cgroup rw,nosuid,nodev,noexec,relatime,cpu,cpuacct 0 0
cgroup /sys/fs/cgroup/cpuset cgroup rw,nosuid,nodev,noexec,relatime,cpuset 0 0
cgroup /sys/fs/cgroup/bfqio cgroup rw,nosuid,nodev,noexec,relatime,bfqio 0 0
systemd-1 /proc/sys/fs/binfmt_misc autofs rw,relatime,fd=20,pgrp=1,timeout=300,minproto=5,maxproto=5,direct 0 0
tmpfs /tmp tmpfs rw 0 0
mqueue /dev/mqueue mqueue rw,relatime 0 0
hugetlbfs /dev/hugepages hugetlbfs rw,relatime 0 0
debugfs /sys/kernel/debug debugfs rw,relatime 0 0
configfs /sys/kernel/config configfs rw,relatime 0 0
tmpfs /etc/pacman.d/gnupg tmpfs rw,relatime,mode=755 0 0
tmpfs /run/user/1000 tmpfs rw,nosuid,nodev,relatime,size=206780k,mode=700,uid=1000,gid=100 0 0
gvfsd-fuse /run/user/1000/gvfs fuse.gvfsd-fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=100 0 0
fusectl /sys/fs/fuse/connections fusectl rw,relatime 0 0
/dev/sda2 /tmp/calamares-root-o5etst4c ext4 rw,relatime,data=ordered 0 0
proc /tmp/calamares-root-o5etst4c/proc proc rw,relatime 0 0
sys /tmp/calamares-root-o5etst4c/sys sysfs rw,relatime 0 0
dev /tmp/calamares-root-o5etst4c/dev devtmpfs rw,nosuid,relatime,size=1026004k,nr_inodes=216056,mode=755 0 0
tmpfs /tmp/calamares-root-o5etst4c/run tmpfs rw,relatime 0 0
[manjaro@manjaro Desktop]$ sudo calamares -d

(calamares:1867): Gtk-WARNING **: Unable to locate theme engine in module_path: "adwaita",

(calamares:1867): Gtk-WARNING **: Unable to locate theme engine in module_path: "adwaita",
Translation: Calamares: Using system locale: "en_US"
Translation: Qt: Using default locale, system locale one not found: "en_US"
00:23:20 [1]: Default font ===== 
Pixel size:    -1 
Point size:    10 
Point sizeF:   10 
Font family:   "Cantarell" 
Metric height: 18 
00:23:20 [1]: Font height: 18 
00:23:20 [1]: Available languages: ("ar", "ast", "ca", "cs_CZ", "da", "de", "en", "es_MX", "es", "fi_FI", "fr", "hr", "hu", "id", "it_IT", "ja", "lt", "nl", "pl", "pt_BR", "pt_PT", "ro", "ru", "sk", "sl", "sv", "tr_TR", "zh_CN", "zh_TW") 
00:23:20 [1]: CalamaresApplication thread: 0x8dfd168 
00:23:20 [1]: Using Calamares settings file at "/usr/share/calamares/settings.conf" 
00:23:20 [1]: Using Calamares branding file at "/usr/share/calamares/branding/manjaro/branding.desc" 
00:23:20 [1]: Loaded branding component "manjaro" 
00:23:20 [1]: Loading module.desc for "bootloader" 
00:23:20 [1]: Loading module.desc for "displaymanager" 
00:23:20 [1]: Loading module.desc for "dracut" 
00:23:20 [1]: Loading module.desc for "finished" 
00:23:20 [1]: Loading module.desc for "fstab" 
00:23:20 [1]: Loading module.desc for "greeting" 
00:23:20 [1]: Loading module.desc for "grubcfg" 
00:23:20 [1]: Loading module.desc for "hardwarecfg" 
00:23:20 [1]: Loading module.desc for "hwclock" 
00:23:20 [1]: Loading module.desc for "initcpio" 
00:23:20 [1]: Loading module.desc for "initcpiocfg" 
00:23:20 [1]: Loading module.desc for "initramfs" 
00:23:20 [1]: Loading module.desc for "keyboard" 
00:23:20 [1]: Loading module.desc for "locale" 
00:23:20 [1]: Loading module.desc for "localecfg" 
00:23:20 [1]: Loading module.desc for "localegen" 
00:23:20 [1]: Loading module.desc for "machineid" 
00:23:20 [1]: Loading module.desc for "mount" 
00:23:20 [1]: Loading module.desc for "networkcfg" 
00:23:20 [1]: Loading module.desc for "packages" 
00:23:20 [1]: Loading module.desc for "partition" 
00:23:20 [1]: Loading module.desc for "postcfg" 
00:23:20 [1]: Loading module.desc for "prepare" 
00:23:20 [1]: Loading module.desc for "services" 
00:23:20 [1]: Loading module.desc for "summary" 
00:23:20 [1]: Loading module.desc for "umount" 
00:23:20 [1]: Loading module.desc for "umountall" 
00:23:20 [1]: Loading module.desc for "unpackfs" 
00:23:20 [1]: Loading module.desc for "users" 
00:23:20 [1]: Proposed window size: 1024 648 
libGL error: pci id for fd 13: 80ee:beef, driver (null)
libGL error: core dri or dri2 extension not found
libGL error: failed to load driver: vboxvideo
00:23:21 [1]: QML import paths: ("/usr/share/calamares/qml", "/usr/bin", "/usr/lib/qt/qml") 
00:23:21 [1]: Initial locale  "en_US" 
00:23:21 [8]: Translation: Calamares: Using system locale: "en_US"
00:23:21 [8]: Translation: Qt: Using default locale, system locale one not found: "en_US"
No layout variant specified on the command line
Trailing -variant option ignored
00:23:22 [1]: xkbmap selection changed to:  "us" - "" 
00:23:23 [8]: getting smart status failed for  "/dev/sda" :  Operation not supported
00:23:24 [0]: QFileInfo::absolutePath: Constructed with empty filename
00:23:24 [8]: getting smart status failed for  "/dev/sr0" :  Operation not supported
00:23:25 [1]: Need at least storage bytes: 5905580032 
00:23:25 [1]: Need at least ram bytes: 1073741824 
00:23:25 [1]: enoughStorage, enoughRam, hasPower, hasInternet:  true true true true 
00:23:27 [1]: checking if "/dev/sda2" can be resized. 
00:23:27 [1]: "/dev/sda2" seems like a good path 
00:23:27 [1]: found Partition* for "/dev/sda2" 
00:23:27 [1]: Required  storage B: 8160437862 
00:23:27 [1]: Available storage B: 3082102505472 
00:23:27 [1]: Partition "/dev/sda2" authorized for resize + autopartition install. 
00:23:27 [1]: "Osprober lines, clean:
/dev/sda2:Manjaro Linux (0.9.0-dev):ManjaroLinux:linux" 
00:23:27 [1]: Current index changed: "/dev/sda2" 
00:23:27 [1]: PSI added item "/dev/sda1" size 615514112 
00:23:27 [1]: PSI added item "/dev/sda2" size 6462373888 
00:23:27 [1]: PSI added item "/dev/sda3" size 1508238848 
00:23:27 [1]: PSI added item "" size 2742272 
00:23:27 [1]: void PartitionSplitterWidget::setSplitPartition(const QString&, qint64, qint64, qint64, const QString&) path: "/dev/sda2" 
minSize: 486906675 
maxSize: -1698063974 
prfSize: 3231186944 
00:23:27 [1]: itemToResize: "/dev/sda2" 
00:23:27 [1]: Items updated. Status: 
00:23:27 [1]: item "/dev/sda1" size 615514112 
00:23:27 [1]: item "/dev/sda2" size -1698063974 
00:23:27 [1]: item "" size 8160437862 
00:23:27 [1]: item "/dev/sda3" size 1508238848 
00:23:27 [1]: item "" size 2742272 
00:23:35 [1]: Choice applied:  4 
00:23:55 [8]: getting smart status failed for  "/dev/sda" :  Operation not supported
00:23:55 [0]: QFileInfo::absolutePath: Constructed with empty filename
00:23:57 [1]: Module "partition" already loaded. 
00:23:57 [1]: Module "locale" already loaded. 
00:23:57 [1]: Module "keyboard" already loaded. 
00:23:57 [1]: Module "users" already loaded. 
00:23:57 [1]: PartitionCodeModule has been asked for jobs. About to return: "Clear mounts for partitioning operations on /dev/sda
Format partition /dev/sda2 (file system: ext4, size: 6163 MB) on ATA VBOX HARDDISK.
Delete partition /dev/sda3
Create partition (file system: ext4, size: 1438 MB) on ATA VBOX HARDDISK.
Set partition information" 
00:23:57 [0]: Starting job "Run script umountall/main.py" 
umount: /tmp/calamares-root-o5etst4c/sys (sys) unmounted
umount: /tmp/calamares-root-o5etst4c/run (tmpfs) unmounted
umount: /tmp/calamares-root-o5etst4c/proc (proc) unmounted
umount: /tmp/calamares-root-o5etst4c/dev (dev) unmounted
umount: /tmp/calamares-root-o5etst4c (/dev/sda2) unmounted
00:23:58 [0]: Starting job "Clear mounts for partitioning operations on /dev/sda" 
00:23:58 [1]: ClearMountsJob finished. Here's what was done:
 "" 
00:23:58 [0]: Starting job "Format partition /dev/sda2 (file system: ext4, size: 6163 MB) on ATA VBOX HARDDISK." 
00:24:03 [0]: Starting job "Delete partition /dev/sda3" 
00:24:04 [0]: Starting job "Create partition (file system: ext4, size: 1438 MB) on ATA VBOX HARDDISK." 
00:24:07 [0]: Starting job "Set partition information" 
00:24:07 [0]: Starting job "Run script mount/main.py" 
00:24:07 [0]: Starting job "Run script unpackfs/main.py" 
rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at rsync.c(632) [sender=3.1.1]
rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at io.c(504) [generator=3.1.1]
00:24:14 [0]: Installation failed: 
00:24:14 [0]: - message: "Failed to unpack image /bootmnt/manjaro/i686/root-image.sqfs" 
00:24:14 [0]: - details: "rsync failed with error code 20." 
00:24:16 [8]: Shutting down Calamares... 
00:24:16 [8]: Finished shutdown. 
00:24:16 [0]: QBasicTimer::start: QBasicTimer can only be used with threads started with QThread
00:24:16 [0]: QBasicTimer::start: QBasicTimer can only be used with threads started with QThread
00:24:16 [0]: QBasicTimer::start: QBasicTimer can only be used with threads started with QThread
00:24:16 [0]: QBasicTimer::start: QBasicTimer can only be used with threads started with QThread
00:24:16 [0]: QBasicTimer::start: QBasicTimer can only be used with threads started with QThread
00:24:16 [0]: QBasicTimer::start: QBasicTimer can only be used with threads started with QThread
00:24:16 [0]: QBasicTimer::start: QBasicTimer can only be used with threads started with QThread
00:24:16 [0]: QBasicTimer::start: QBasicTimer can only be used with threads started with QThread
00:24:16 [0]: QBasicTimer::start: QBasicTimer can only be used with threads started with QThread
00:24:16 [0]: QBasicTimer::start: QBasicTimer can only be used with threads started with QThread
[manjaro@manjaro Desktop]$