hpwit

#define __HARDWARE_MAP
#include "I2SClocklessLedDriver.h"
#define ledsperstrip 256
#define numstrips 16
//here we have 3 colors per pixel
uint8_t leds[numstrips*ledsperstrip*3];
#define LED_WIDTH 16
uint16_t cal(int i)
{
    int d=i/LED_WIDTH;

hpwit

#include <FastLED.h>


struct UDS56503
{
        
    uint32_t valuel ;
    uint8_t valueh ;
    
    inline UDS56503() __attribute__((always_inline))

hpwit

#define FULL_DMA_BUFFER

#define USE_FASTLED
#define COLOR_GRB
#include "I2SClocklessLedDriver.h"
#define NUM_LEDS_PER_STRIP 256
#define NUMSTRIPS 3
//here we have 3 colors per pixel
//uint8_t leds[numstrips*ledsperstrip*3];
//this one below is same as the one above

hpwit

/*
 * Arduino interface for the use of WS2812 strip LEDs
 * Uses Adalight protocol and is compatible with Boblight, Prismatik etc...
 * "Magic Word" for synchronisation is 'Ada' followed by LED High, Low and Checksum
 * @author: Wifsimster <wifsimster@gmail.com> 
 * @library: FastLED v3.001
 * @date: 11/22/2015
 */
#include "FastLED.h"
#define NUM_LEDS 240

hpwit

#define NBIS2SERIALPINS 7 //the number of virtual pins here mavimum 32 strips
#define STATIC_COLOR_GRB 1 //set the strip color
#define NUM_LEDS_PER_STRIP 120
#define NUM_LEDS (NUM_LEDS_PER_STRIP*NBIS2SERIALPINS*8)
#define CLOCK_PIN 16
#define LATCH_PIN 26
#define NUM_STRIPS 56

#define CONFIG_FREERTOS_USE_TRACE_FACILITY 1
#define CONFIG_FREERTOS_USE_STATS_FORMATTING_FUNCTIONS 1

hpwit

#include "settings.h"
#include "myCredentials.h"        // oh yeah. there is myCredentials.zip on the root of this repository. include it as a library and then edit the file with your onw ips and stuff

#include "setupWifi.h"
#include "OTA.h"

#ifdef USING_SERIALOTA
#include "SerialOTA.h"
#endif

hpwit

#include "FastLED.h"


#define NUM_LEDS_PER_STRIP 21
#define NUMSTRIPS 7 
#define NUM_LEDS NUM_STRIPS * NUM_LEDS_PER_STRIP
#define CLOCK_PIN 18 //needs to be higher than 16
#include "I2SHD108.h"
    
int Pins[16]={23,22,21,19,5,4,2};

hpwit

#include "FastLED.h"


#define NUM_LEDS_PER_STRIP 21
#define NUMSTRIPS 7 
#define NUM_LEDS NUMSTRIPS * NUM_LEDS_PER_STRIP
#define CLOCK_PIN 18 //needs to be higher than 16
#include "I2SHD108.h"
    
int Pins[16]={23,22,21,19,5,4,2};

hpwit

#pragma once
//#include "FastLED.h"

struct Brightness{
  uint8_t bred;
  uint8_t bgreen;
  uint8_t bblue;
inline Brightness() __attribute__((always_inline))
    {

hpwit

#include "FastLED.h"


#define NUM_LEDS_PER_STRIP 21
#define NUMSTRIPS 7 
#define NUM_LEDS NUMSTRIPS * NUM_LEDS_PER_STRIP
#define CLOCK_PIN 18 //needs to be higher than 16
#include "I2SHD108.h"
    
int Pins[16]={23,22,21,19,5,4,2};