hpwit

/*
 
 */

#pragma once

#include "esp_heap_caps.h"
#include "soc/soc.h"

hpwit

#include <Arduino.h>
static TaskHandle_t FastLEDshowTaskHandle = 0;
static TaskHandle_t userTaskHandle = 0;
#include <dumbconfig.h>
//#include <dumbbt.h>
#include <BluetoothSerial.h>
BluetoothSerial Bluetooth;
I2SClocklessVirtualLedDriver driver;

void FastLEDshowESP32()

hpwit

#ifndef dumbconfig_h // Contains settings for Myriad components
#define dumbconfig_h

/*
the lines above  needs to be declared before #include "FastLed.h"
NBIS2SERIALPINS represents the number of pins used by the esp value, it ranges from 1->15
NUM_LEDS_PER_STRIP the length of your strip if you have different strips size put here the longest strip
for each pin you would be able to drive 8 virtuals pins
linked the 74hc595 with the strips
Q0/PIN 15 => VIRTUAL PIN 8

hpwit

static TaskHandle_t FastLEDshowTaskHandle = 0;
static TaskHandle_t userTaskHandle = 0;


void FastLEDshowESP32()
{
    if (userTaskHandle == 0) {
        const TickType_t xMaxBlockTime = pdMS_TO_TICKS( 200 );
        // -- Store the handle of the current task, so that the show task can
        //    notify it when it's done

hpwit

void FastLEDshowESP322()
{
    if (userTaskHandle == 0) {
        const TickType_t xMaxBlockTime = pdMS_TO_TICKS( 200 );
        // -- Store the handle of the current task, so that the show task can
        //    notify it when it's done
       // noInterrupts();
        userTaskHandle = xTaskGetCurrentTaskHandle();
        

hpwit

//lit correctement le fichier artnet enregistré sur la SD
//attention ce sketch n'allume pas les leds!
/*WiFi connected.
12:18:03.617 -> IP address: 
12:18:03.617 -> 192.168.0.38
12:18:03.663 -> 16516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516516521683864228152864480500000240312516300000000000000001649613640000000000000000000000000000000000000000000000000000testSD_start
12:18:03.663 -> 0
12:18:03.663 -> testSD_end
12:18:03.663 -> Starting artnet with starting universe :0
12:18:03.663 -> Starting Artnet nbNee sdedUniverses:1

hpwit

uint32_t offp,offi,x,y;
//printf("li%d:\n",line_width);
    y=ledtodisp/line_width;
    #if SNAKEPATTERN == 1
        if(y%2 == 0)
        {
            x=ledtodisp%line_width;
           // off=((x+startleds)%line_width)+y*line_width;
            offi=MOD(x+startleds,line_width)+y*line_width;
            #if ALTERNATEPATTERN == 1

hpwit

#include "FastLED.h"
#define NUM_LEDS 170
#define Data_Pin 12 //change according to th epin you use
 #define chipset NEOPIXEL
#define NB_LETTERS 10

//Letter Class this may seem a bit more complex to set up but way easiuer to use
class Letter {

hpwit

/*
the lines above  needs to be declared before #include "FastLed.h"
NBIS2SERIALPINS represents the number of pins used by the esp value, it ranges from 1->15
NUM_LEDS_PER_STRIP the length of your strip if you have different strips size put here the longuest strip
for each pin you would be able to drive 8 virtuals pins
linked the 74hc595 with the strips
Q0/PIN 15 => VIRTUAL PIN 8
Q1/PIN 1  => VIRTUAL PIN 7

hpwit

#include <ArtnetESP32.h>

#include "FastLED.h"
FASTLED_USING_NAMESPACE

//The following has to be adapted to your specifications

#define NUM_LEDS 1020