hpwit

#include <Arduino.h>
#include <FastLED.h>
#include <UIPEthernet.h>

#define NUM_LEDS 120
#define UNIVERSE_SIZE 120
#define START_UNIVERSE 0
#define ARTNET_PORT 6454
const uint8_t universesCount = NUM_LEDS/UNIVERSE_SIZE;

hpwit

// Hello Yves. Could you please check this code.  I will be using different length led strips to fit the guitar matrix shape. A total of 600 leds (although probaly more like 800 !!)
//thanks
#include <WiFi.h>

//#include <ESP8266WiFi.h>

#include "SD.h"
#include "SPI.h"

//#include "FS.h"

hpwit

#include <WiFi.h>
//#include <ESP8266WiFi.h>
#include "SD.h"
#include "SPI.h"
//#include "FS.h"
#include <Wire.h> 
//#include <LiquidCrystal_I2C.h>
//LiquidCrystal_I2C lcd(0x27, 16, 2);
//#include "esp_task_wdt.h"

hpwit

//#define ARTNET_DEBUG
#define ARTNET_NO_TIMEOUT
#include <ArtnetESP32.h>
#define NBIS2SERIALPINS 2     //number of esp32 pins you will use. the total number of strips available will be NBIS2SERIALPINS * 8 here 72 strips
#define NUM_LEDS_PER_STRIP (3 * 123)//the length of your strip if you have different strips size put here the longuest strip
//#define MULTIPLE_LEDSBUFFER //use the mode several leds buffers in that mode the number of NBIS2SERIALPINS has to be <=12
#define STATIC_COLOR_GRB 1
 #define USE_FASTLED //te enable the needed types
#include "FastLED.h"

hpwit

#include <ArtnetESP32.h>

#include "FastLED.h"
FASTLED_USING_NAMESPACE

//The following has to be adapted to your specifications
#define LED_WIDTH 54
#define LED_HEIGHT 37

hpwit

//#define ESP32_VIRTUAL_DRIVER true //To enable virtual pin driver for esp32
//#define ESP_VIRTUAL_DRIVER_8 1 //to use the 8:1 ratio

//#define FULL_DMA_BUFFER
#define NBIS2SERIALPINS 9     //number of esp32 pins you will use. the total number of strips available will be NBIS2SERIALPINS * 8 here 72 strips
#define NUM_LEDS_PER_STRIP 900 //the length of your strip if you have different strips size put here the longuest strip
#define MULTIPLE_LEDSBUFFER //use the mode several leds buffers in that mode the number of NBIS2SERIALPINS has to be <=12
#define STATIC_COLOR_GRB 1
#define USE_FASTLED //te enable the needed types
#include "FastLED.h"

hpwit

#define ESP32_VIRTUAL_DRIVER true //To enable virtual pin driver for esp32
#define ESP_VIRTUAL_DRIVER_8 1 //to use the 8:1 ratio
#define NBIS2SERIALPINS 8 //number of esp32 pins you will use. the total number of strips available will be NBIS2SERIALPINS * 8 here 56 strips
#define NUM_LEDS_PER_STRIP 1080 //the length of your strip if you have different strips size put here the longuest strip

/*
the lines above  needs to be declared before #include "FastLed.h"
NBIS2SERIALPINS represents the number of pins used by the esp value, it ranges from 1->15
NUM_LEDS_PER_STRIP the length of your strip if you have different strips size put here the longuest strip
for each pin you would be able to drive 8 virtuals pins

hpwit

#define ESP32_VIRTUAL_DRIVER true //To enable virtual pin driver for esp32
#define NBIS2SERIALPINS 18

/*
This needs to be declared before #include "FastLed.h"
NBIS2SERIALPINS represent the number of pins used by the esp value, it ranges from 1->20
for each pin you would be able to drive 5 virtuals pins
i.e for
#define NBIS2SERIALPINS 8
You will be able to drive up to 8*5=40 pins

hpwit

#include <ESPAsyncE131.h>
#include "FastLED.h"
#define UNIVERSE 1                      // First DMX Universe to listen for
#define UNIVERSE_COUNT 14               // Total number of Universes to listen for, starting at UNIVERSE

const char ssid[] = "esp131";         // Replace with your SSID
const char passphrase[] = "LEDtest1";   // Replace with your WPA2 passphrase
byte vUniverse=0;
byte vCycle1=0,vMark1;
byte vCycle2=0,vMark2;

hpwit

#include <WiFi.h>
//#include <ESP8266WiFi.h>
#include "SD.h"
#include "SPI.h"
//#include "FS.h"
#include <Wire.h> 
#include <LiquidCrystal_I2C.h>
LiquidCrystal_I2C lcd(0x27, 16, 2);
#include "esp_task_wdt.h"