config-override

; DO NOT EDIT THIS FILE
;Steps per unit:
M92 X100.00000 Y100.00000 Z100.00000
;Acceleration mm/sec^2:
M204 S4000.00000 Z0.00000
;X- Junction Deviation, Z- Z junction deviation, S - Minimum Planner speed mm/sec:
M205 X0.05000 Z-1.00000 S0.00000
;Max feedrates in mm/sec, XYZ cartesian, ABC actuator:
M203 X250.00000 Y250.00000 Z250.00000 A300.00000 B300.00000 C300.00000
;Optional arm solution specific settings:
M665 L226.1250 R115.1165
;WCS settings
G54
;Home offset (mm):
M206 X0.00 Y0.00 Z2.61
;Trim (mm):
M666 X-0.576 Y-1.640 Z-0.025
;Max Z
M665 Z163.000
;E Steps per mm:
M92 E575.0000 P57988
;E Filament diameter:
M200 D0.0000 P57988
;E retract length, feedrate:
M207 S3.5000 F3600.0000 Z0.2000 Q24000.0000 P57988
;E retract recover length, feedrate:
M208 S0.0000 F600.0000 P57988
;E acceleration mm/sec²:
M204 E2000.0000 P57988
;E max feed rate mm/sec:
M203 E0.0000 P57988
;PID settings:
M301 S0 P67.4101 I5.6410 D50.0000 X255.0000 Y255
;Max temperature setting:
M143 S0 P300.0000
;PID settings:
M301 S1 P233.1707 I0.0000 D1141.0791 X255.0000 Y255
;Max temperature setting:
M143 S1 P300.0000
;Optional temp sensor specific settings:
M305 S1 B4092.000000000000000000 R100000.000000000000000000 X25.000000000000000000
;Probe feedrates Slow/fast(K)/Return (mm/sec) max_z (mm) height (mm):
M670 S5.00 K100.00 R0.00 Z163.00 H5.00
;Probe offsets:
M565 X0.00000 Y0.00000 Z5.00000
;Load saved grid
M375