hyperair · June 27, 2015 09:36
diff --git a/switch_clip.gcode b/switch_clip.gcode
 ; generated by Slic3r 1.2.9 on 2015-06-27 at 17:32:30

 ; external perimeters extrusion width = 0.40mm
 ; perimeters extrusion width = 0.40mm
 ; infill extrusion width = 0.60mm
 ; solid infill extrusion width = 0.60mm
 ; top infill extrusion width = 0.40mm
 ; support material extrusion width = 0.60mm

 M107 ; disable fan
 M190 S70 ; set bed temperature
 M104 S95 ; set temperature
 G28 ; home
 M109 S95 ; wait for temperature to be reached
 G21 ; set units to millimeters
 G90 ; use absolute coordinates
 M82 ; use absolute distances for extrusion
 G92 E0 ; reset extrusion distance
 G1 E-5.00000 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z1.000 F12000.000 ; lift Z
 G1 X84.922 Y54.610 F12000.000 ; move to first skirt point
 G1 Z0.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X86.697 Y53.068 E5.18707 F1200.000 ; skirt
 G1 X88.883 Y52.205 E5.37414 ; skirt
 G1 X90.308 Y52.058 E5.48816 ; skirt
 G1 X96.808 Y52.058 E6.00544 ; skirt
 G1 X99.125 Y52.455 E6.19251 ; skirt
 G1 X101.177 Y53.601 E6.37958 F1200.000 ; skirt
 G1 X102.731 Y55.365 E6.56665 ; skirt
 G1 X103.598 Y57.501 E6.75010 ; skirt
 G1 X105.598 Y66.470 E7.48145 ; skirt
 G1 X117.054 Y134.910 E13.00375 ; skirt
 G1 X117.149 Y136.057 E13.09537 ; skirt
 G1 X117.149 Y137.972 E13.24774 ; skirt
 G1 X116.352 Y141.205 E13.51276 ; skirt
 G1 X115.462 Y142.900 E13.66512 ; skirt
 G1 X113.242 Y145.401 E13.93127 ; skirt
 G1 X111.679 Y146.480 E14.08241 ; skirt
 G1 X108.566 Y147.661 E14.34735 ; skirt
 G1 X106.664 Y147.892 E14.49979 ; skirt
 G1 X105.826 Y147.942 E14.56663 ; skirt
 G1 X93.326 Y147.942 E15.56140 ; skirt
 G1 X90.859 Y147.490 E15.76100 ; skirt
 G1 X89.069 Y146.811 E15.91336 ; skirt
 G1 X86.329 Y144.920 E16.17834 ; skirt
 G1 X85.059 Y143.487 E16.33071 ; skirt
 G1 X83.511 Y140.539 E16.59567 ; skirt
 G1 X83.053 Y138.680 E16.74808 ; skirt
 G1 X82.851 Y136.970 E16.88507 ; skirt
 G1 X83.351 Y58.970 E23.09258 ; skirt
 G1 X83.763 Y56.655 E23.27965 ; skirt
 G1 X84.893 Y54.663 E23.46194 ; skirt
 G1 F9600
 G1 X86.697 Y53.068 E22.89020 ; wipe and retract
 G1 F9600
 G1 X88.883 Y52.205 E22.33192 ; wipe and retract
 G1 F9600
 G1 X90.308 Y52.058 E21.99165 ; wipe and retract
 G1 F9600
 G1 X96.808 Y52.058 E20.44790 ; wipe and retract
 G1 F9600
 G1 X99.125 Y52.455 E19.88962 ; wipe and retract
 G1 E18.46194 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z1.200 F12000.000 ; lift Z
 G1 X95.308 Y123.515 F12000.000 ; move to first perimeter point
 G1 Z0.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X95.308 Y132.515 E5.71623 F1200.000 ; perimeter
 G1 X109.092 Y132.515 E6.81321 ; perimeter
 G1 X109.692 Y136.099 E7.10241 ; perimeter
 G1 X109.692 Y137.849 E7.24167 ; perimeter
 G1 X108.917 Y139.326 E7.37441 ; perimeter
 G1 X107.544 Y140.273 E7.50716 ; perimeter
 G1 X105.796 Y140.485 E7.64730 ; perimeter
 G1 X93.418 Y140.485 E8.63237 ; perimeter
 G1 X91.828 Y139.883 E8.76764 ; perimeter
 G1 X90.722 Y138.634 E8.90038 ; perimeter
 G1 X90.308 Y136.955 E9.03797 ; perimeter
 G1 X90.805 Y59.515 E15.20096 ; perimeter
 G1 X96.308 Y59.515 E15.63891 ; perimeter
 G1 X96.308 Y69.515 E16.43473 ; perimeter
 G1 X98.557 Y69.515 E16.61370 ; perimeter
 G1 X107.587 Y123.515 E20.97078 ; perimeter
 G1 X95.368 Y123.515 E21.94321 ; perimeter
 G1 X94.908 Y123.515 F12000.000 ; move inwards before travel
 G1 X94.351 Y122.558 F12000.000 ; move to first perimeter point
 G1 X94.351 Y133.472 E22.81178 F1200.000 ; perimeter
 G1 X108.282 Y133.472 E23.92044 ; perimeter
 G1 X108.735 Y136.178 E24.13883 ; perimeter
 G1 X108.735 Y137.613 E24.25298 ; perimeter
 G1 X108.179 Y138.672 E24.34818 ; perimeter
 G1 X107.194 Y139.352 E24.44338 ; perimeter
 G1 X105.738 Y139.528 E24.56014 ; perimeter
 G1 X93.593 Y139.528 E25.52665 ; perimeter
 G1 X92.388 Y139.071 E25.62918 ; perimeter
 G1 X91.595 Y138.176 E25.72438 ; perimeter
 G1 X91.266 Y136.842 E25.83370 ; perimeter
 G1 X91.756 Y60.472 E31.91151 ; perimeter
 G1 X95.351 Y60.472 E32.19762 ; perimeter
 G1 X95.351 Y70.472 E32.99343 ; perimeter
 G1 X97.747 Y70.472 E33.18409 ; perimeter
 G1 X106.457 Y122.558 E37.38672 ; perimeter
 G1 X94.411 Y122.558 E38.34536 ; perimeter
 G1 X93.394 Y121.600 F12000.000 ; move to first perimeter point
 G1 X93.394 Y134.429 E39.36625 F1200.000 ; perimeter
 G1 X107.472 Y134.429 E40.48660 ; perimeter
 G1 X107.778 Y136.258 E40.63417 ; perimeter
 G1 X107.778 Y137.377 E40.72323 ; perimeter
 G1 X107.441 Y138.018 E40.78088 ; perimeter
 G1 X106.845 Y138.430 E40.83854 ; perimeter
 G1 X105.680 Y138.571 E40.93191 ; perimeter
 G1 X93.768 Y138.571 E41.87986 ; perimeter
 G1 X92.948 Y138.260 E41.94966 ; perimeter
 G1 X92.468 Y137.718 E42.00731 ; perimeter
 G1 X92.224 Y136.729 E42.08837 ; perimeter
 G1 X92.707 Y61.429 E48.08100 ; perimeter
 G1 X94.394 Y61.429 E48.21526 ; perimeter
 G1 X94.394 Y71.429 E49.01108 ; perimeter
 G1 X96.936 Y71.429 E49.21341 ; perimeter
 G1 X105.327 Y121.600 E53.26160 ; perimeter
 G1 X93.454 Y121.600 E54.20644 ; perimeter
 G1 X93.284 Y120.643 F12000.000 ; move to first perimeter point
 G1 X93.594 Y72.386 E58.04693 F1200.000 ; perimeter
 G1 X96.126 Y72.386 E58.24846 ; perimeter
 G1 X104.196 Y120.643 E62.14219 ; perimeter
 G1 X93.344 Y120.643 E63.00580 ; perimeter
 G1 X94.248 Y119.686 F12000.000 ; move to first perimeter point
 G1 X94.545 Y73.343 E66.69395 F1200.000 ; perimeter
 G1 X95.316 Y73.343 E66.75532 ; perimeter
 G1 X103.066 Y119.686 E70.49461 ; perimeter
 G1 X94.308 Y119.686 E71.19159 ; perimeter
 G1 X95.211 Y118.729 F12000.000 ; move to first perimeter point
 G1 X95.439 Y83.067 E74.02969 F1200.000 ; perimeter
 G1 X95.965 Y83.025 E74.07162 ; perimeter
 G1 X101.935 Y118.729 E76.95245 ; perimeter
 G1 X95.271 Y118.729 E77.48282 ; perimeter
 G1 X93.190 Y135.386 F12000.000 ; move to first perimeter point
 G1 X106.662 Y135.386 E78.55492 F1200.000 ; perimeter
 G1 X106.821 Y136.337 E78.63169 ; perimeter
 G1 X106.821 Y137.141 E78.69564 ; perimeter
 G1 X106.703 Y137.365 E78.71575 ; perimeter
 G1 X106.495 Y137.508 E78.73586 ; perimeter
 G1 X105.622 Y137.614 E78.80586 ; perimeter
 G1 X93.944 Y137.614 E79.73524 ; perimeter
 G1 X93.508 Y137.449 E79.77231 ; perimeter
 G1 X93.341 Y137.260 E79.79241 ; perimeter
 G1 X93.182 Y136.616 E79.84520 ; perimeter
 G1 X93.189 Y135.446 E79.93832 ; perimeter
 G1 X92.815 Y134.907 F12000.000 ; move to first infill point
 G1 X92.859 Y121.122 E81.03538 F1200.000 ; infill
 G1 X95.742 Y117.916 F12000.000 ; move to first infill point
 G1 X101.262 Y117.916 E81.48417 F1200.000 ; infill
 G1 X101.118 Y116.938 E81.56454 ; infill
 G1 X95.742 Y116.938 E82.00168 ; infill
 G1 X95.742 Y115.960 E82.08120 ; infill
 G1 X100.955 Y115.960 E82.50504 ; infill
 G1 X100.791 Y114.982 E82.58566 ; infill
 G1 X95.742 Y114.982 E82.99621 ; infill
 G1 X95.747 Y114.004 E83.07572 ; infill
 G1 X100.628 Y114.004 E83.47256 ; infill
 G1 X100.464 Y113.026 E83.55318 ; infill
 G1 X95.754 Y113.026 E83.93621 ; infill
 G1 X95.760 Y112.048 E84.01573 ; infill
 G1 X100.301 Y112.048 E84.38495 ; infill
 G1 X100.137 Y111.070 E84.46557 ; infill
 G1 X95.766 Y111.070 E84.82098 ; infill
 G1 X95.773 Y110.092 E84.90050 ; infill
 G1 X99.974 Y110.092 E85.24210 ; infill
 G1 X99.810 Y109.114 E85.32273 ; infill
 G1 X95.779 Y109.114 E85.65052 ; infill
 G1 X95.785 Y108.137 E85.73004 ; infill
 G1 X99.647 Y108.137 E86.04403 ; infill
 G1 X99.483 Y107.159 E86.12466 ; infill
 G1 X95.791 Y107.159 E86.42484 ; infill
 G1 X95.798 Y106.181 E86.50436 ; infill
 G1 X99.319 Y106.181 E86.79073 ; infill
 G1 X99.156 Y105.203 E86.87135 ; infill
 G1 X95.804 Y105.203 E87.14392 ; infill
 G1 X95.810 Y104.225 E87.22344 ; infill
 G1 X98.992 Y104.225 E87.48220 ; infill
 G1 X98.829 Y103.247 E87.56282 ; infill
 G1 X95.816 Y103.247 E87.80777 ; infill
 G1 X95.823 Y102.269 E87.88729 ; infill
 G1 X98.665 Y102.269 E88.11844 ; infill
 G1 X98.502 Y101.291 E88.19906 ; infill
 G1 X95.829 Y101.291 E88.41640 ; infill
 G1 X95.835 Y100.313 E88.49592 ; infill
 G1 X98.338 Y100.313 E88.69944 ; infill
 G1 X98.175 Y99.335 E88.78007 ; infill
 G1 X95.842 Y99.335 E88.96979 ; infill
 G1 X95.848 Y98.357 E89.04931 ; infill
 G1 X98.011 Y98.357 E89.22522 ; infill
 G1 X97.848 Y97.379 E89.30584 ; infill
 G1 X95.854 Y97.379 E89.46795 ; infill
 G1 X95.860 Y96.402 E89.54747 ; infill
 G1 X97.684 Y96.402 E89.69577 ; infill
 G1 X97.521 Y95.424 E89.77639 ; infill
 G1 X95.867 Y95.424 E89.91088 ; infill
 G1 X96.511 Y94.446 E90.00612 ; infill
 G1 X97.357 Y94.446 E90.07490 ; infill
 G1 X96.550 Y93.670 F12000.000 ; move to first infill point
 G1 X96.156 Y88.733 E90.88081 F1200.000 ; infill
 G1 X96.156 Y88.733 F12000.000 ; move to first infill point
 G1 X95.927 Y85.871 E91.10933 F1200.000 ; infill
 G1 X95.664 Y82.569 F12000.000 ; move to first infill point
 G1 X95.270 Y77.632 E91.91523 F1200.000 ; infill
 G1 X95.270 Y77.632 F12000.000 ; move to first infill point
 G1 X95.041 Y74.770 E92.14375 F1200.000 ; infill
 G1 X93.517 Y71.907 F12000.000 ; move to first infill point
 G1 X93.549 Y61.907 E93.77107 F1200.000 ; infill
 G1 X93.661 Y136.500 F12000.000 ; move to first infill point
 G1 X105.555 Y136.500 E95.70652 F1200.000 ; infill
 G1 X106.342 Y136.452 E95.83489 ; infill
 G1 F9600
 G1 X105.555 Y136.500 E95.64755 ; wipe and retract
 G1 F9600
 G1 X93.661 Y136.500 E92.82284 ; wipe and retract
 G1 E90.83489 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z1.200 F12000.000 ; lift Z
 M106 S224.4 ; enable fan
 G1 X95.608 Y132.215 F12000.000 ; move to first perimeter point
 G1 Z0.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X109.346 Y132.215 E5.40791 F7200.000 ; perimeter
 G1 X109.992 Y136.074 E5.52409 ; perimeter
 G1 X109.992 Y137.923 E5.57898 ; perimeter
 G1 X109.148 Y139.531 E5.63290 ; perimeter
 G1 X107.653 Y140.562 E5.68681 ; perimeter
 G1 X105.814 Y140.785 E5.74183 ; perimeter
 G1 X93.363 Y140.785 E6.11153 ; perimeter
 G1 X91.653 Y140.137 E6.16582 ; perimeter
 G1 X90.449 Y138.778 E6.21974 ; perimeter
 G1 X90.008 Y136.991 E6.27438 ; perimeter
 G1 X90.507 Y59.215 E8.58371 ; perimeter
 G1 X96.608 Y59.215 E8.76486 ; perimeter
 G1 X96.608 Y69.215 E9.06178 ; perimeter
 G1 X98.811 Y69.215 E9.12718 ; perimeter
 G1 X107.942 Y123.815 E10.77084 ; perimeter
 G1 X95.608 Y123.815 E11.13704 ; perimeter
 G1 X95.608 Y132.155 E11.38467 ; perimeter
 G1 X95.608 Y132.615 F12000.000 ; move inwards before travel
 G1 X95.251 Y132.572 F12000.000 ; move to first perimeter point
 G1 X109.044 Y132.572 E11.79420 F7200.000 ; perimeter
 G1 X109.635 Y136.104 E11.90053 ; perimeter
 G1 X109.635 Y137.835 E11.95192 ; perimeter
 G1 X108.873 Y139.287 E12.00061 ; perimeter
 G1 X107.523 Y140.218 E12.04931 ; perimeter
 G1 X105.792 Y140.428 E12.10107 ; perimeter
 G1 X93.428 Y140.428 E12.46818 ; perimeter
 G1 X91.862 Y139.834 E12.51792 ; perimeter
 G1 X90.774 Y138.607 E12.56661 ; perimeter
 G1 X90.366 Y136.949 E12.61731 ; perimeter
 G1 X90.862 Y59.572 E14.91479 ; perimeter
 G1 X96.251 Y59.572 E15.07480 ; perimeter
 G1 X96.251 Y69.572 E15.37172 ; perimeter
 G1 X98.509 Y69.572 E15.43875 ; perimeter
 G1 X107.520 Y123.458 E17.06091 ; perimeter
 G1 X95.251 Y123.458 E17.42519 ; perimeter
 G1 X95.251 Y132.512 E17.69402 ; perimeter
 G1 X94.894 Y132.929 F12000.000 ; move to first perimeter point
 G1 X108.742 Y132.929 E18.10518 F7200.000 ; perimeter
 G1 X109.278 Y136.133 E18.20165 ; perimeter
 G1 X109.278 Y137.747 E18.24955 ; perimeter
 G1 X108.597 Y139.043 E18.29302 ; perimeter
 G1 X107.393 Y139.874 E18.33648 ; perimeter
 G1 X105.771 Y140.071 E18.38499 ; perimeter
 G1 X93.493 Y140.071 E18.74952 ; perimeter
 G1 X92.071 Y139.532 E18.79470 ; perimeter
 G1 X91.100 Y138.436 E18.83816 ; perimeter
 G1 X90.723 Y136.906 E18.88493 ; perimeter
 G1 X91.216 Y59.929 E21.17055 ; perimeter
 G1 X95.894 Y59.929 E21.30943 ; perimeter
 G1 X95.894 Y69.929 E21.60634 ; perimeter
 G1 X98.206 Y69.929 E21.67500 ; perimeter
 G1 X107.098 Y123.100 E23.27566 ; perimeter
 G1 X94.894 Y123.100 E23.63803 ; perimeter
 G1 X94.894 Y132.869 E23.92806 ; perimeter
 G1 X94.537 Y133.286 F12000.000 ; move to first perimeter point
 G1 X108.440 Y133.286 E24.34085 F7200.000 ; perimeter
 G1 X108.921 Y136.163 E24.42746 ; perimeter
 G1 X108.921 Y137.659 E24.47187 ; perimeter
 G1 X108.322 Y138.799 E24.51010 ; perimeter
 G1 X107.262 Y139.530 E24.54834 ; perimeter
 G1 X105.749 Y139.714 E24.59360 ; perimeter
 G1 X93.559 Y139.714 E24.95554 ; perimeter
 G1 X92.280 Y139.229 E24.99617 ; perimeter
 G1 X91.426 Y138.265 E25.03440 ; perimeter
 G1 X91.080 Y136.864 E25.07724 ; perimeter
 G1 X91.571 Y60.286 E27.35100 ; perimeter
 G1 X95.537 Y60.286 E27.46874 ; perimeter
 G1 X95.537 Y70.286 E27.76566 ; perimeter
 G1 X97.904 Y70.286 E27.83594 ; perimeter
 G1 X106.677 Y122.743 E29.41510 ; perimeter
 G1 X94.537 Y122.743 E29.77555 ; perimeter
 G1 X94.537 Y133.226 E30.08678 ; perimeter
 G1 X94.180 Y133.643 F12000.000 ; move to first perimeter point
 G1 X108.137 Y133.643 E30.50120 F7200.000 ; perimeter
 G1 X108.564 Y136.193 E30.57795 ; perimeter
 G1 X108.564 Y137.571 E30.61886 ; perimeter
 G1 X108.047 Y138.555 E30.65188 ; perimeter
 G1 X107.132 Y139.187 E30.68489 ; perimeter
 G1 X105.728 Y139.357 E30.72689 ; perimeter
 G1 X93.624 Y139.357 E31.08625 ; perimeter
 G1 X92.488 Y138.926 E31.12232 ; perimeter
 G1 X91.751 Y138.094 E31.15533 ; perimeter
 G1 X91.438 Y136.822 E31.19423 ; perimeter
 G1 X91.926 Y60.643 E33.45613 ; perimeter
 G1 X95.180 Y60.643 E33.55274 ; perimeter
 G1 X95.180 Y70.643 E33.84965 ; perimeter
 G1 X97.602 Y70.643 E33.92157 ; perimeter
 G1 X106.255 Y122.386 E35.47923 ; perimeter
 G1 X94.180 Y122.386 E35.83775 ; perimeter
 G1 X94.180 Y133.583 E36.17019 ; perimeter
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 X107.835 Y134.000 E36.58623 F7200.000 ; perimeter
 G1 X108.207 Y136.222 E36.65313 ; perimeter
 G1 X108.207 Y137.482 E36.69055 ; perimeter
 G1 X107.772 Y138.311 E36.71833 ; perimeter
 G1 X107.001 Y138.843 E36.74612 ; perimeter
 G1 X105.706 Y139.000 E36.78487 ; perimeter
 G1 X93.690 Y139.000 E37.14164 ; perimeter
 G1 X92.697 Y138.624 E37.17315 ; perimeter
 G1 X92.077 Y137.923 E37.20094 ; perimeter
 G1 X91.795 Y136.780 E37.23590 ; perimeter
 G1 X92.281 Y61.000 E39.48595 ; perimeter
 G1 X94.823 Y61.000 E39.56142 ; perimeter
 G1 X94.823 Y71.000 E39.85833 ; perimeter
 G1 X97.299 Y71.000 E39.93187 ; perimeter
 G1 X105.833 Y122.029 E41.46804 ; perimeter
 G1 X93.823 Y122.029 E41.82464 ; perimeter
 G1 X93.823 Y133.940 E42.17828 ; perimeter
 G1 X92.184 Y133.450 F12000.000 ; move to first infill point
 G1 X92.184 Y136.984 E42.34240 F7200.000 ; infill
 G1 X92.742 Y138.286 F12000.000 ; move to first infill point
 G1 X92.742 Y61.221 E45.92035 F7200.000 ; infill
 G1 X94.417 Y61.221 F12000.000 ; move to first infill point
 G1 X94.417 Y121.828 E48.73419 F7200.000 ; infill
 G1 X93.859 Y121.828 E48.76012 ; infill
 G1 X93.859 Y61.221 E51.57396 ; infill
 G1 X93.301 Y61.221 E51.59988 ; infill
 G1 X93.301 Y138.625 E55.19361 ; infill
 G1 X93.859 Y138.779 E55.22049 ; infill
 G1 X93.859 Y134.201 E55.43301 ; infill
 G1 X94.417 Y134.201 E55.45893 ; infill
 G1 X94.417 Y138.779 E55.67144 ; infill
 G1 X94.976 Y138.779 E55.69737 ; infill
 G1 X94.976 Y134.201 E55.90988 ; infill
 G1 X95.534 Y134.201 E55.93580 ; infill
 G1 X95.534 Y138.779 E56.14832 ; infill
 G1 X96.092 Y138.779 E56.17424 ; infill
 G1 X96.092 Y134.201 E56.38676 ; infill
 G1 X96.651 Y134.201 E56.41268 ; infill
 G1 X96.651 Y138.779 E56.62519 ; infill
 G1 X97.209 Y138.779 E56.65112 ; infill
 G1 X97.209 Y134.201 E56.86363 ; infill
 G1 X97.767 Y134.201 E56.88955 ; infill
 G1 X97.767 Y138.779 E57.10207 ; infill
 G1 X98.326 Y138.779 E57.12799 ; infill
 G1 X98.326 Y134.201 E57.34051 ; infill
 G1 X98.884 Y134.201 E57.36643 ; infill
 G1 X98.884 Y138.779 E57.57894 ; infill
 G1 X99.443 Y138.779 E57.60487 ; infill
 G1 X99.443 Y134.201 E57.81738 ; infill
 G1 X100.001 Y134.201 E57.84330 ; infill
 G1 X100.001 Y138.779 E58.05582 ; infill
 G1 X100.559 Y138.779 E58.08174 ; infill
 G1 X100.559 Y134.201 E58.29425 ; infill
 G1 X101.118 Y134.201 E58.32018 ; infill
 G1 X101.118 Y138.779 E58.53269 ; infill
 G1 X101.676 Y138.779 E58.55862 ; infill
 G1 X101.676 Y134.201 E58.77113 ; infill
 G1 X102.234 Y134.201 E58.79705 ; infill
 G1 X102.234 Y138.779 E59.00957 ; infill
 G1 X102.793 Y138.779 E59.03549 ; infill
 G1 X102.793 Y134.201 E59.24800 ; infill
 G1 X103.351 Y134.201 E59.27393 ; infill
 G1 X103.351 Y138.779 E59.48644 ; infill
 G1 X103.909 Y138.779 E59.51237 ; infill
 G1 X103.909 Y134.201 E59.72488 ; infill
 G1 X104.468 Y134.201 E59.75080 ; infill
 G1 X104.468 Y138.779 E59.96332 ; infill
 G1 X105.026 Y138.779 E59.98924 ; infill
 G1 X105.026 Y134.201 E60.20175 ; infill
 G1 X105.585 Y134.201 E60.22768 ; infill
 G1 X105.585 Y138.779 E60.44019 ; infill
 G1 X106.143 Y138.743 E60.46617 ; infill
 G1 X106.143 Y134.201 E60.67702 ; infill
 G1 X106.701 Y134.201 E60.70295 ; infill
 G1 X106.701 Y138.675 E60.91065 ; infill
 G1 X107.260 Y138.384 E60.93989 ; infill
 G1 X107.260 Y134.201 E61.13408 ; infill
 G1 X107.818 Y135.966 F12000.000 ; move to first infill point
 G1 X107.818 Y137.597 E61.20979 F7200.000 ; infill
 G1 F9600
 G1 X107.818 Y135.966 E60.82247 ; wipe and retract
 G1 E56.20979 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z1.400 F12000.000 ; lift Z
 G1 X105.026 Y119.272 F12000.000 ; move to first infill point
 G1 Z0.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X105.026 Y121.828 E5.11868 F7200.000 ; infill
 G1 X104.468 Y121.828 E5.14461 ; infill
 G1 X104.468 Y115.933 E5.41831 ; infill
 G1 X103.909 Y112.594 F12000.000 ; move to first infill point
 G1 X103.909 Y121.828 E5.84703 F7200.000 ; infill
 G1 X103.351 Y121.828 E5.87296 ; infill
 G1 X103.351 Y109.255 E6.45670 ; infill
 G1 X102.793 Y105.916 F12000.000 ; move to first infill point
 G1 X102.793 Y121.828 E7.19546 F7200.000 ; infill
 G1 X102.234 Y121.828 E7.22138 ; infill
 G1 X102.234 Y102.577 E8.11517 ; infill
 G1 X101.676 Y99.238 F12000.000 ; move to first infill point
 G1 X101.676 Y121.828 E9.16397 F7200.000 ; infill
 G1 X101.118 Y121.828 E9.18989 ; infill
 G1 X101.118 Y95.899 E10.39371 ; infill
 G1 X100.559 Y92.560 F12000.000 ; move to first infill point
 G1 X100.559 Y121.828 E11.75255 F7200.000 ; infill
 G1 X100.001 Y121.828 E11.77847 ; infill
 G1 X100.001 Y89.221 E13.29233 ; infill
 G1 X99.443 Y85.882 F12000.000 ; move to first infill point
 G1 X99.443 Y121.828 E14.96121 F7200.000 ; infill
 G1 X98.884 Y121.828 E14.98714 ; infill
 G1 X98.884 Y82.543 E16.81104 ; infill
 G1 X98.326 Y79.205 F12000.000 ; move to first infill point
 G1 X98.326 Y121.828 E18.78996 F7200.000 ; infill
 G1 X97.767 Y121.828 E18.81588 ; infill
 G1 X97.767 Y75.866 E20.94982 ; infill
 G1 X97.209 Y72.527 F12000.000 ; move to first infill point
 G1 X97.209 Y121.828 E23.23878 F7200.000 ; infill
 G1 X96.651 Y121.828 E23.26470 ; infill
 G1 X96.651 Y71.201 E25.61519 ; infill
 G1 X96.092 Y71.201 E25.64112 ; infill
 G1 X96.092 Y121.828 E27.99161 ; infill
 G1 X95.534 Y121.828 E28.01753 ; infill
 G1 X95.534 Y71.201 E30.36802 ; infill
 G1 X94.976 Y71.201 E30.39395 ; infill
 G1 X94.976 Y121.828 E32.74444 ; infill
 M106 S221.85 ; enable fan
 G1 F9600
 G1 X94.976 Y101.828 E27.99444 ; wipe and retract
 G1 E27.74444 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z1.400 F12000.000 ; lift Z
 G1 X95.608 Y132.215 F12000.000 ; move to first perimeter point
 G1 Z0.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X109.346 Y132.215 E5.40791 F7200.000 ; perimeter
 G1 X109.992 Y136.074 E5.52409 ; perimeter
 G1 X109.992 Y137.923 E5.57898 ; perimeter
 G1 X109.148 Y139.531 E5.63290 ; perimeter
 G1 X107.653 Y140.562 E5.68681 ; perimeter
 G1 X105.814 Y140.785 E5.74183 ; perimeter
 G1 X93.363 Y140.785 E6.11153 ; perimeter
 G1 X91.653 Y140.137 E6.16582 ; perimeter
 G1 X90.449 Y138.778 E6.21974 ; perimeter
 G1 X90.008 Y136.991 E6.27438 ; perimeter
 G1 X90.507 Y59.215 E8.58371 ; perimeter
 G1 X96.608 Y59.215 E8.76486 ; perimeter
 G1 X96.608 Y69.215 E9.06178 ; perimeter
 G1 X98.811 Y69.215 E9.12718 ; perimeter
 G1 X107.942 Y123.815 E10.77084 ; perimeter
 G1 X95.608 Y123.815 E11.13704 ; perimeter
 G1 X95.608 Y132.155 E11.38467 ; perimeter
 G1 X95.608 Y132.615 F12000.000 ; move inwards before travel
 G1 X95.251 Y132.572 F12000.000 ; move to first perimeter point
 G1 X109.044 Y132.572 E11.79420 F7200.000 ; perimeter
 G1 X109.635 Y136.104 E11.90053 ; perimeter
 G1 X109.635 Y137.835 E11.95192 ; perimeter
 G1 X108.873 Y139.287 E12.00061 ; perimeter
 G1 X107.523 Y140.218 E12.04931 ; perimeter
 G1 X105.792 Y140.428 E12.10107 ; perimeter
 G1 X93.428 Y140.428 E12.46818 ; perimeter
 G1 X91.862 Y139.834 E12.51792 ; perimeter
 G1 X90.774 Y138.607 E12.56661 ; perimeter
 G1 X90.366 Y136.949 E12.61731 ; perimeter
 G1 X90.862 Y59.572 E14.91479 ; perimeter
 G1 X96.251 Y59.572 E15.07480 ; perimeter
 G1 X96.251 Y69.572 E15.37172 ; perimeter
 G1 X98.509 Y69.572 E15.43875 ; perimeter
 G1 X107.520 Y123.458 E17.06091 ; perimeter
 G1 X95.251 Y123.458 E17.42519 ; perimeter
 G1 X95.251 Y132.512 E17.69402 ; perimeter
 G1 X94.894 Y132.929 F12000.000 ; move to first perimeter point
 G1 X108.742 Y132.929 E18.10518 F7200.000 ; perimeter
 G1 X109.278 Y136.133 E18.20165 ; perimeter
 G1 X109.278 Y137.747 E18.24955 ; perimeter
 G1 X108.597 Y139.043 E18.29302 ; perimeter
 G1 X107.393 Y139.874 E18.33648 ; perimeter
 G1 X105.771 Y140.071 E18.38499 ; perimeter
 G1 X93.493 Y140.071 E18.74952 ; perimeter
 G1 X92.071 Y139.532 E18.79470 ; perimeter
 G1 X91.100 Y138.436 E18.83816 ; perimeter
 G1 X90.723 Y136.906 E18.88493 ; perimeter
 G1 X91.216 Y59.929 E21.17055 ; perimeter
 G1 X95.894 Y59.929 E21.30943 ; perimeter
 G1 X95.894 Y69.929 E21.60634 ; perimeter
 G1 X98.206 Y69.929 E21.67500 ; perimeter
 G1 X107.098 Y123.100 E23.27566 ; perimeter
 G1 X94.894 Y123.100 E23.63803 ; perimeter
 G1 X94.894 Y132.869 E23.92806 ; perimeter
 G1 X94.537 Y133.286 F12000.000 ; move to first perimeter point
 G1 X108.440 Y133.286 E24.34085 F7200.000 ; perimeter
 G1 X108.921 Y136.163 E24.42746 ; perimeter
 G1 X108.921 Y137.659 E24.47187 ; perimeter
 G1 X108.322 Y138.799 E24.51010 ; perimeter
 G1 X107.262 Y139.530 E24.54834 ; perimeter
 G1 X105.749 Y139.714 E24.59360 ; perimeter
 G1 X93.559 Y139.714 E24.95554 ; perimeter
 G1 X92.280 Y139.229 E24.99617 ; perimeter
 G1 X91.426 Y138.265 E25.03440 ; perimeter
 G1 X91.080 Y136.864 E25.07724 ; perimeter
 G1 X91.571 Y60.286 E27.35100 ; perimeter
 G1 X95.537 Y60.286 E27.46874 ; perimeter
 G1 X95.537 Y70.286 E27.76566 ; perimeter
 G1 X97.904 Y70.286 E27.83594 ; perimeter
 G1 X106.677 Y122.743 E29.41510 ; perimeter
 G1 X94.537 Y122.743 E29.77555 ; perimeter
 G1 X94.537 Y133.226 E30.08678 ; perimeter
 G1 X94.180 Y133.643 F12000.000 ; move to first perimeter point
 G1 X108.137 Y133.643 E30.50120 F7200.000 ; perimeter
 G1 X108.564 Y136.193 E30.57795 ; perimeter
 G1 X108.564 Y137.571 E30.61886 ; perimeter
 G1 X108.047 Y138.555 E30.65188 ; perimeter
 G1 X107.132 Y139.187 E30.68489 ; perimeter
 G1 X105.728 Y139.357 E30.72689 ; perimeter
 G1 X93.624 Y139.357 E31.08625 ; perimeter
 G1 X92.488 Y138.926 E31.12232 ; perimeter
 G1 X91.751 Y138.094 E31.15533 ; perimeter
 G1 X91.438 Y136.822 E31.19423 ; perimeter
 G1 X91.926 Y60.643 E33.45613 ; perimeter
 G1 X95.180 Y60.643 E33.55274 ; perimeter
 G1 X95.180 Y70.643 E33.84965 ; perimeter
 G1 X97.602 Y70.643 E33.92157 ; perimeter
 G1 X106.255 Y122.386 E35.47923 ; perimeter
 G1 X94.180 Y122.386 E35.83775 ; perimeter
 G1 X94.180 Y133.583 E36.17019 ; perimeter
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 X107.835 Y134.000 E36.58623 F7200.000 ; perimeter
 G1 X108.207 Y136.222 E36.65313 ; perimeter
 G1 X108.207 Y137.482 E36.69055 ; perimeter
 G1 X107.772 Y138.311 E36.71833 ; perimeter
 G1 X107.001 Y138.843 E36.74612 ; perimeter
 G1 X105.706 Y139.000 E36.78487 ; perimeter
 G1 X93.690 Y139.000 E37.14164 ; perimeter
 G1 X92.697 Y138.624 E37.17315 ; perimeter
 G1 X92.077 Y137.923 E37.20094 ; perimeter
 G1 X91.795 Y136.780 E37.23590 ; perimeter
 G1 X92.281 Y61.000 E39.48595 ; perimeter
 G1 X94.823 Y61.000 E39.56142 ; perimeter
 G1 X94.823 Y71.000 E39.85833 ; perimeter
 G1 X97.299 Y71.000 E39.93187 ; perimeter
 G1 X105.833 Y122.029 E41.46804 ; perimeter
 G1 X93.823 Y122.029 E41.82464 ; perimeter
 G1 X93.823 Y133.940 E42.17828 ; perimeter
 G1 X93.621 Y134.135 F12000.000 ; move to first infill point
 G1 X92.017 Y134.135 E42.25295 F7200.000 ; infill
 G1 X92.017 Y133.575 E42.27898 ; infill
 G1 X93.621 Y133.575 E42.35364 ; infill
 G1 X93.621 Y133.016 E42.37967 ; infill
 G1 X92.021 Y133.016 E42.45416 ; infill
 G1 X92.024 Y132.456 E42.48019 ; infill
 G1 X93.621 Y132.456 E42.55451 ; infill
 G1 X93.621 Y131.897 E42.58055 ; infill
 G1 X92.028 Y131.897 E42.65470 ; infill
 G1 X92.031 Y131.337 E42.68074 ; infill
 G1 X93.621 Y131.337 E42.75472 ; infill
 G1 X93.621 Y130.777 E42.78076 ; infill
 G1 X92.035 Y130.777 E42.85458 ; infill
 G1 X92.038 Y130.218 E42.88061 ; infill
 G1 X93.621 Y130.218 E42.95426 ; infill
 G1 X93.621 Y129.658 E42.98030 ; infill
 G1 X92.042 Y129.658 E43.05378 ; infill
 G1 X92.046 Y129.099 E43.07982 ; infill
 G1 X93.621 Y129.099 E43.15314 ; infill
 G1 X93.621 Y128.539 E43.17918 ; infill
 G1 X92.049 Y128.539 E43.25232 ; infill
 G1 X92.053 Y127.979 E43.27836 ; infill
 G1 X93.621 Y127.979 E43.35134 ; infill
 G1 X93.621 Y127.420 E43.37738 ; infill
 G1 X92.056 Y127.420 E43.45020 ; infill
 G1 X92.060 Y126.860 E43.47624 ; infill
 G1 X93.621 Y126.860 E43.54888 ; infill
 G1 X93.621 Y126.301 E43.57492 ; infill
 G1 X92.064 Y126.301 E43.64740 ; infill
 G1 X92.067 Y125.741 E43.67344 ; infill
 G1 X93.621 Y125.741 E43.74576 ; infill
 G1 X93.621 Y125.181 E43.77179 ; infill
 G1 X92.071 Y125.181 E43.84394 ; infill
 G1 X92.074 Y124.622 E43.86998 ; infill
 G1 X93.621 Y124.622 E43.94196 ; infill
 G1 X93.621 Y124.062 E43.96800 ; infill
 G1 X92.078 Y124.062 E44.03981 ; infill
 G1 X92.082 Y123.503 E44.06585 ; infill
 G1 X93.621 Y123.503 E44.13750 ; infill
 G1 X93.621 Y122.943 E44.16353 ; infill
 G1 X92.085 Y122.943 E44.23501 ; infill
 G1 X92.089 Y122.384 E44.26105 ; infill
 G1 X93.621 Y122.384 E44.33236 ; infill
 G1 X93.621 Y121.824 E44.35840 ; infill
 G1 X92.092 Y121.824 E44.42955 ; infill
 G1 X92.096 Y121.264 E44.45559 ; infill
 G1 X105.499 Y121.264 E45.07921 ; infill
 G1 X105.405 Y120.705 E45.10561 ; infill
 G1 X92.099 Y120.705 E45.72472 ; infill
 G1 X92.103 Y120.145 E45.75076 ; infill
 G1 X105.311 Y120.145 E46.36534 ; infill
 G1 X105.218 Y119.586 E46.39174 ; infill
 G1 X92.107 Y119.586 E47.00181 ; infill
 G1 X92.110 Y119.026 E47.02785 ; infill
 G1 X105.124 Y119.026 E47.63339 ; infill
 G1 X105.031 Y118.466 E47.65979 ; infill
 G1 X92.114 Y118.466 E48.26081 ; infill
 G1 X92.117 Y117.907 E48.28685 ; infill
 G1 X104.937 Y117.907 E48.88335 ; infill
 G1 X104.844 Y117.347 E48.90975 ; infill
 G1 X92.121 Y117.347 E49.50173 ; infill
 G1 X92.125 Y116.788 E49.52777 ; infill
 G1 X104.750 Y116.788 E50.11523 ; infill
 G1 X104.656 Y116.228 E50.14163 ; infill
 G1 X92.128 Y116.228 E50.72457 ; infill
 G1 X92.132 Y115.668 E50.75060 ; infill
 G1 X104.563 Y115.668 E51.32902 ; infill
 G1 X104.469 Y115.109 E51.35542 ; infill
 G1 X92.135 Y115.109 E51.92932 ; infill
 G1 X92.139 Y114.549 E51.95535 ; infill
 G1 X104.376 Y114.549 E52.52473 ; infill
 G1 X104.282 Y113.990 E52.55113 ; infill
 G1 X92.143 Y113.990 E53.11598 ; infill
 G1 X92.146 Y113.430 E53.14202 ; infill
 G1 X104.189 Y113.430 E53.70235 ; infill
 G1 X104.095 Y112.871 E53.72875 ; infill
 G1 X92.150 Y112.871 E54.28456 ; infill
 G1 X92.153 Y112.311 E54.31060 ; infill
 G1 X104.001 Y112.311 E54.86189 ; infill
 G1 X103.908 Y111.751 E54.88829 ; infill
 G1 X92.157 Y111.751 E55.43506 ; infill
 G1 X92.160 Y111.192 E55.46110 ; infill
 G1 X103.814 Y111.192 E56.00334 ; infill
 G1 X103.721 Y110.632 E56.02974 ; infill
 G1 X92.164 Y110.632 E56.56747 ; infill
 G1 X92.168 Y110.073 E56.59351 ; infill
 G1 X103.627 Y110.073 E57.12671 ; infill
 G1 X103.533 Y109.513 E57.15311 ; infill
 G1 X92.171 Y109.513 E57.68180 ; infill
 G1 X92.175 Y108.953 E57.70783 ; infill
 G1 X103.440 Y108.953 E58.23200 ; infill
 G1 X103.346 Y108.394 E58.25840 ; infill
 G1 X92.178 Y108.394 E58.77804 ; infill
 G1 X92.182 Y107.834 E58.80408 ; infill
 G1 X103.253 Y107.834 E59.31920 ; infill
 G1 X103.159 Y107.275 E59.34560 ; infill
 G1 X92.186 Y107.275 E59.85620 ; infill
 G1 X92.189 Y106.715 E59.88223 ; infill
 G1 X103.066 Y106.715 E60.38831 ; infill
 G1 X102.972 Y106.156 E60.41471 ; infill
 G1 X92.193 Y106.156 E60.91627 ; infill
 G1 X92.196 Y105.596 E60.94231 ; infill
 G1 X102.878 Y105.596 E61.43934 ; infill
 G1 X102.785 Y105.036 E61.46574 ; infill
 G1 X92.200 Y105.036 E61.95826 ; infill
 G1 X92.203 Y104.477 E61.98430 ; infill
 G1 X102.691 Y104.477 E62.47229 ; infill
 G1 X102.598 Y103.917 E62.49869 ; infill
 G1 X92.207 Y103.917 E62.98216 ; infill
 G1 X92.211 Y103.358 E63.00820 ; infill
 G1 X102.504 Y103.358 E63.48715 ; infill
 G1 X102.411 Y102.798 E63.51355 ; infill
 G1 X92.214 Y102.798 E63.98798 ; infill
 G1 X92.218 Y102.238 E64.01402 ; infill
 G1 X102.317 Y102.238 E64.48393 ; infill
 G1 X102.223 Y101.679 E64.51033 ; infill
 G1 X92.221 Y101.679 E64.97572 ; infill
 G1 X92.225 Y101.119 E65.00175 ; infill
 G1 X102.130 Y101.119 E65.46262 ; infill
 G1 X102.036 Y100.560 E65.48902 ; infill
 G1 X92.229 Y100.560 E65.94537 ; infill
 G1 X92.232 Y100.000 E65.97140 ; infill
 G1 X101.943 Y100.000 E66.42323 ; infill
 G1 X101.849 Y99.440 E66.44963 ; infill
 G1 X92.236 Y99.440 E66.89693 ; infill
 G1 X92.239 Y98.881 E66.92297 ; infill
 G1 X101.755 Y98.881 E67.36575 ; infill
 G1 X101.662 Y98.321 E67.39215 ; infill
 G1 X92.243 Y98.321 E67.83041 ; infill
 G1 X92.247 Y97.762 E67.85645 ; infill
 G1 X101.568 Y97.762 E68.29019 ; infill
 G1 X101.475 Y97.202 E68.31659 ; infill
 G1 X92.250 Y97.202 E68.74581 ; infill
 G1 X92.254 Y96.643 E68.77185 ; infill
 G1 X101.381 Y96.643 E69.19655 ; infill
 G1 X101.288 Y96.083 E69.22294 ; infill
 G1 X92.257 Y96.083 E69.64312 ; infill
 G1 X92.261 Y95.523 E69.66916 ; infill
 G1 X101.194 Y95.523 E70.08482 ; infill
 G1 X101.100 Y94.964 E70.11121 ; infill
 G1 X92.264 Y94.964 E70.52235 ; infill
 G1 X92.268 Y94.404 E70.54839 ; infill
 G1 X101.007 Y94.404 E70.95500 ; infill
 G1 X100.913 Y93.845 E70.98140 ; infill
 G1 X92.272 Y93.845 E71.38349 ; infill
 G1 X92.275 Y93.285 E71.40953 ; infill
 G1 X100.820 Y93.285 E71.80710 ; infill
 G1 X100.726 Y92.725 E71.83350 ; infill
 G1 X92.279 Y92.725 E72.22655 ; infill
 G1 X92.282 Y92.166 E72.25259 ; infill
 G1 X100.632 Y92.166 E72.64112 ; infill
 G1 X100.539 Y91.606 E72.66752 ; infill
 G1 X92.286 Y91.606 E73.05152 ; infill
 G1 X92.290 Y91.047 E73.07756 ; infill
 G1 X100.445 Y91.047 E73.45705 ; infill
 G1 X100.352 Y90.487 E73.48345 ; infill
 G1 X92.293 Y90.487 E73.85841 ; infill
 G1 X92.297 Y89.927 E73.88445 ; infill
 G1 X100.258 Y89.927 E74.25489 ; infill
 G1 X100.165 Y89.368 E74.28129 ; infill
 G1 X92.300 Y89.368 E74.64722 ; infill
 G1 X92.304 Y88.808 E74.67325 ; infill
 G1 X100.071 Y88.808 E75.03466 ; infill
 G1 X99.977 Y88.249 E75.06106 ; infill
 G1 X92.308 Y88.249 E75.41794 ; infill
 G1 X92.311 Y87.689 E75.44397 ; infill
 G1 X99.884 Y87.689 E75.79633 ; infill
 G1 X99.790 Y87.130 E75.82273 ; infill
 G1 X92.315 Y87.130 E76.17057 ; infill
 G1 X92.318 Y86.570 E76.19661 ; infill
 G1 X99.697 Y86.570 E76.53993 ; infill
 G1 X99.603 Y86.010 E76.56633 ; infill
 G1 X92.322 Y86.010 E76.90512 ; infill
 G1 X92.325 Y85.451 E76.93116 ; infill
 G1 X99.510 Y85.451 E77.26544 ; infill
 G1 X99.416 Y84.891 E77.29183 ; infill
 G1 X92.329 Y84.891 E77.62159 ; infill
 G1 X92.333 Y84.332 E77.64763 ; infill
 G1 X99.322 Y84.332 E77.97286 ; infill
 G1 X99.229 Y83.772 E77.99926 ; infill
 G1 X92.336 Y83.772 E78.31997 ; infill
 G1 X92.340 Y83.212 E78.34601 ; infill
 G1 X99.135 Y83.212 E78.66220 ; infill
 G1 X99.042 Y82.653 E78.68860 ; infill
 G1 X92.343 Y82.653 E79.00027 ; infill
 G1 X92.347 Y82.093 E79.02630 ; infill
 G1 X98.948 Y82.093 E79.33345 ; infill
 G1 X98.854 Y81.534 E79.35985 ; infill
 G1 X92.351 Y81.534 E79.66248 ; infill
 G1 X92.354 Y80.974 E79.68852 ; infill
 G1 X98.761 Y80.974 E79.98662 ; infill
 G1 X98.667 Y80.414 E80.01302 ; infill
 G1 X92.358 Y80.414 E80.30661 ; infill
 G1 X92.361 Y79.855 E80.33264 ; infill
 G1 X98.574 Y79.855 E80.62171 ; infill
 G1 X98.480 Y79.295 E80.64811 ; infill
 G1 X92.365 Y79.295 E80.93265 ; infill
 G1 X92.368 Y78.736 E80.95869 ; infill
 G1 X98.387 Y78.736 E81.23871 ; infill
 G1 X98.293 Y78.176 E81.26511 ; infill
 G1 X92.372 Y78.176 E81.54061 ; infill
 G1 X92.376 Y77.617 E81.56665 ; infill
 G1 X98.199 Y77.617 E81.83763 ; infill
 G1 X98.106 Y77.057 E81.86402 ; infill
 G1 X92.379 Y77.057 E82.13048 ; infill
 G1 X92.383 Y76.497 E82.15652 ; infill
 G1 X98.012 Y76.497 E82.41846 ; infill
 G1 X97.919 Y75.938 E82.44486 ; infill
 G1 X92.386 Y75.938 E82.70227 ; infill
 G1 X92.390 Y75.378 E82.72831 ; infill
 G1 X97.825 Y75.378 E82.98120 ; infill
 G1 X97.732 Y74.819 E83.00760 ; infill
 G1 X92.394 Y74.819 E83.25598 ; infill
 G1 X92.397 Y74.259 E83.28201 ; infill
 G1 X97.638 Y74.259 E83.52587 ; infill
 G1 X97.544 Y73.699 E83.55227 ; infill
 G1 X92.401 Y73.699 E83.79160 ; infill
 G1 X92.404 Y73.140 E83.81763 ; infill
 G1 X97.451 Y73.140 E84.05244 ; infill
 G1 X97.357 Y72.580 E84.07884 ; infill
 G1 X92.408 Y72.580 E84.30913 ; infill
 G1 X92.412 Y72.021 E84.33517 ; infill
 G1 X97.264 Y72.021 E84.56094 ; infill
 G1 X97.170 Y71.461 E84.58734 ; infill
 G1 X92.415 Y71.461 E84.80858 ; infill
 G1 X94.621 Y70.901 F12000.000 ; move to first infill point
 G1 X92.419 Y70.901 E84.91107 F7200.000 ; infill
 G1 X92.422 Y70.342 E84.93711 ; infill
 G1 X94.621 Y70.342 E85.03943 ; infill
 G1 X94.621 Y69.782 E85.06547 ; infill
 G1 X92.426 Y69.782 E85.16762 ; infill
 G1 X92.429 Y69.223 E85.19366 ; infill
 G1 X94.621 Y69.223 E85.29564 ; infill
 G1 X94.621 Y68.663 E85.32168 ; infill
 G1 X92.433 Y68.663 E85.42350 ; infill
 G1 X92.437 Y68.104 E85.44954 ; infill
 G1 X94.621 Y68.104 E85.55119 ; infill
 G1 X94.621 Y67.544 E85.57723 ; infill
 G1 X92.440 Y67.544 E85.67872 ; infill
 G1 X92.444 Y66.984 E85.70475 ; infill
 G1 X94.621 Y66.984 E85.80607 ; infill
 G1 X94.621 Y66.425 E85.83211 ; infill
 G1 X92.447 Y66.425 E85.93326 ; infill
 G1 X92.451 Y65.865 E85.95930 ; infill
 G1 X94.621 Y65.865 E86.06029 ; infill
 G1 X94.621 Y65.306 E86.08632 ; infill
 G1 X92.455 Y65.306 E86.18714 ; infill
 G1 X92.458 Y64.746 E86.21318 ; infill
 G1 X94.621 Y64.746 E86.31383 ; infill
 G1 X94.621 Y64.186 E86.33987 ; infill
 G1 X92.462 Y64.186 E86.44035 ; infill
 G1 X92.465 Y63.627 E86.46639 ; infill
 G1 X94.621 Y63.627 E86.56671 ; infill
 G1 X94.621 Y63.067 E86.59275 ; infill
 G1 X92.469 Y63.067 E86.69290 ; infill
 G1 X92.473 Y62.508 E86.71894 ; infill
 G1 X94.621 Y62.508 E86.81892 ; infill
 G1 X94.621 Y61.948 E86.84496 ; infill
 G1 X92.476 Y61.948 E86.94477 ; infill
 G1 X92.480 Y61.388 E86.97081 ; infill
 G1 X94.621 Y61.388 E87.07046 ; infill
 G1 X92.017 Y134.694 F12000.000 ; move to first infill point
 G1 X107.745 Y134.694 E87.80228 F7200.000 ; infill
 G1 X107.838 Y135.254 E87.82867 ; infill
 G1 X92.017 Y135.254 E88.56484 ; infill
 G1 X92.017 Y135.814 E88.59088 ; infill
 G1 X107.932 Y135.814 E89.33140 ; infill
 G1 X107.985 Y136.373 E89.35756 ; infill
 G1 X92.017 Y136.373 E90.10057 ; infill
 G1 X92.045 Y136.933 E90.12664 ; infill
 G1 X107.985 Y136.933 E90.86832 ; infill
 G1 X107.952 Y137.492 E90.89441 ; infill
 G1 X92.183 Y137.492 E91.62814 ; infill
 G1 X92.516 Y138.052 E91.65844 ; infill
 G1 X107.659 Y138.052 E92.36302 ; infill
 G1 X106.015 Y138.612 F12000.000 ; move to first infill point
 G1 X93.538 Y138.612 E92.94357 F7200.000 ; infill
 G1 F9600
 G1 X106.015 Y138.612 E89.98027 ; wipe and retract
 G1 E87.94357 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z1.600 F12000.000 ; lift Z
 G1 Z0.600 F12000.000 ; move to next layer (5)
 M106 S224.4 ; enable fan
 G1 Z1.600 F12000.000 ; lift Z
 G1 X95.608 Y132.215 F12000.000 ; move to first perimeter point
 G1 Z0.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X109.346 Y132.215 E5.40791 F7200.000 ; perimeter
 G1 X109.992 Y136.074 E5.52409 ; perimeter
 G1 X109.992 Y137.923 E5.57898 ; perimeter
 G1 X109.148 Y139.531 E5.63290 ; perimeter
 G1 X107.653 Y140.562 E5.68681 ; perimeter
 G1 X105.814 Y140.785 E5.74183 ; perimeter
 G1 X93.363 Y140.785 E6.11153 ; perimeter
 G1 X91.653 Y140.137 E6.16582 ; perimeter
 G1 X90.449 Y138.778 E6.21974 ; perimeter
 G1 X90.008 Y136.991 E6.27438 ; perimeter
 G1 X90.507 Y59.215 E8.58371 ; perimeter
 G1 X96.608 Y59.215 E8.76486 ; perimeter
 G1 X96.608 Y69.215 E9.06178 ; perimeter
 G1 X98.811 Y69.215 E9.12718 ; perimeter
 G1 X107.942 Y123.815 E10.77084 ; perimeter
 G1 X95.608 Y123.815 E11.13704 ; perimeter
 G1 X95.608 Y132.155 E11.38467 ; perimeter
 G1 X95.608 Y132.615 F12000.000 ; move inwards before travel
 G1 X95.251 Y132.572 F12000.000 ; move to first perimeter point
 G1 X109.044 Y132.572 E11.79420 F7200.000 ; perimeter
 G1 X109.635 Y136.104 E11.90053 ; perimeter
 G1 X109.635 Y137.835 E11.95192 ; perimeter
 G1 X108.873 Y139.287 E12.00061 ; perimeter
 G1 X107.523 Y140.218 E12.04931 ; perimeter
 G1 X105.792 Y140.428 E12.10107 ; perimeter
 G1 X93.428 Y140.428 E12.46818 ; perimeter
 G1 X91.862 Y139.834 E12.51792 ; perimeter
 G1 X90.774 Y138.607 E12.56661 ; perimeter
 G1 X90.366 Y136.949 E12.61731 ; perimeter
 G1 X90.862 Y59.572 E14.91479 ; perimeter
 G1 X96.251 Y59.572 E15.07480 ; perimeter
 G1 X96.251 Y69.572 E15.37172 ; perimeter
 G1 X98.509 Y69.572 E15.43875 ; perimeter
 G1 X107.520 Y123.458 E17.06091 ; perimeter
 G1 X95.251 Y123.458 E17.42519 ; perimeter
 G1 X95.251 Y132.512 E17.69402 ; perimeter
 G1 X94.894 Y132.929 F12000.000 ; move to first perimeter point
 G1 X108.742 Y132.929 E18.10518 F7200.000 ; perimeter
 G1 X109.278 Y136.133 E18.20165 ; perimeter
 G1 X109.278 Y137.747 E18.24955 ; perimeter
 G1 X108.597 Y139.043 E18.29302 ; perimeter
 G1 X107.393 Y139.874 E18.33648 ; perimeter
 G1 X105.771 Y140.071 E18.38499 ; perimeter
 G1 X93.493 Y140.071 E18.74952 ; perimeter
 G1 X92.071 Y139.532 E18.79470 ; perimeter
 G1 X91.100 Y138.436 E18.83816 ; perimeter
 G1 X90.723 Y136.906 E18.88493 ; perimeter
 G1 X91.216 Y59.929 E21.17055 ; perimeter
 G1 X95.894 Y59.929 E21.30943 ; perimeter
 G1 X95.894 Y69.929 E21.60634 ; perimeter
 G1 X98.206 Y69.929 E21.67500 ; perimeter
 G1 X107.098 Y123.100 E23.27566 ; perimeter
 G1 X94.894 Y123.100 E23.63803 ; perimeter
 G1 X94.894 Y132.869 E23.92806 ; perimeter
 G1 X94.537 Y133.286 F12000.000 ; move to first perimeter point
 G1 X108.440 Y133.286 E24.34085 F7200.000 ; perimeter
 G1 X108.921 Y136.163 E24.42746 ; perimeter
 G1 X108.921 Y137.659 E24.47187 ; perimeter
 G1 X108.322 Y138.799 E24.51010 ; perimeter
 G1 X107.262 Y139.530 E24.54834 ; perimeter
 G1 X105.749 Y139.714 E24.59360 ; perimeter
 G1 X93.559 Y139.714 E24.95554 ; perimeter
 G1 X92.280 Y139.229 E24.99617 ; perimeter
 G1 X91.426 Y138.265 E25.03440 ; perimeter
 G1 X91.080 Y136.864 E25.07724 ; perimeter
 G1 X91.571 Y60.286 E27.35100 ; perimeter
 G1 X95.537 Y60.286 E27.46874 ; perimeter
 G1 X95.537 Y70.286 E27.76566 ; perimeter
 G1 X97.904 Y70.286 E27.83594 ; perimeter
 G1 X106.677 Y122.743 E29.41510 ; perimeter
 G1 X94.537 Y122.743 E29.77555 ; perimeter
 G1 X94.537 Y133.226 E30.08678 ; perimeter
 G1 X94.180 Y133.643 F12000.000 ; move to first perimeter point
 G1 X108.137 Y133.643 E30.50120 F7200.000 ; perimeter
 G1 X108.564 Y136.193 E30.57795 ; perimeter
 G1 X108.564 Y137.571 E30.61886 ; perimeter
 G1 X108.047 Y138.555 E30.65188 ; perimeter
 G1 X107.132 Y139.187 E30.68489 ; perimeter
 G1 X105.728 Y139.357 E30.72689 ; perimeter
 G1 X93.624 Y139.357 E31.08625 ; perimeter
 G1 X92.488 Y138.926 E31.12232 ; perimeter
 G1 X91.751 Y138.094 E31.15533 ; perimeter
 G1 X91.438 Y136.822 E31.19423 ; perimeter
 G1 X91.926 Y60.643 E33.45613 ; perimeter
 G1 X95.180 Y60.643 E33.55274 ; perimeter
 G1 X95.180 Y70.643 E33.84965 ; perimeter
 G1 X97.602 Y70.643 E33.92157 ; perimeter
 G1 X106.255 Y122.386 E35.47923 ; perimeter
 G1 X94.180 Y122.386 E35.83775 ; perimeter
 G1 X94.180 Y133.583 E36.17019 ; perimeter
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 X107.835 Y134.000 E36.58623 F7200.000 ; perimeter
 G1 X108.207 Y136.222 E36.65313 ; perimeter
 G1 X108.207 Y137.482 E36.69055 ; perimeter
 G1 X107.772 Y138.311 E36.71833 ; perimeter
 G1 X107.001 Y138.843 E36.74612 ; perimeter
 G1 X105.706 Y139.000 E36.78487 ; perimeter
 G1 X93.690 Y139.000 E37.14164 ; perimeter
 G1 X92.697 Y138.624 E37.17315 ; perimeter
 G1 X92.077 Y137.923 E37.20094 ; perimeter
 G1 X91.795 Y136.780 E37.23590 ; perimeter
 G1 X92.281 Y61.000 E39.48595 ; perimeter
 G1 X94.823 Y61.000 E39.56142 ; perimeter
 G1 X94.823 Y71.000 E39.85833 ; perimeter
 G1 X97.299 Y71.000 E39.93187 ; perimeter
 G1 X105.833 Y122.029 E41.46804 ; perimeter
 G1 X93.823 Y122.029 E41.82464 ; perimeter
 G1 X93.823 Y133.940 E42.17828 ; perimeter
 G1 X92.184 Y133.450 F12000.000 ; move to first infill point
 G1 X92.184 Y136.984 E42.34240 F7200.000 ; infill
 G1 X92.742 Y138.286 F12000.000 ; move to first infill point
 G1 X92.742 Y61.221 E45.92035 F7200.000 ; infill
 G1 X94.417 Y61.221 F12000.000 ; move to first infill point
 G1 X94.417 Y121.828 E48.73419 F7200.000 ; infill
 G1 X93.859 Y121.828 E48.76012 ; infill
 G1 X93.859 Y61.221 E51.57396 ; infill
 G1 X93.301 Y61.221 E51.59988 ; infill
 G1 X93.301 Y138.625 E55.19361 ; infill
 G1 X93.859 Y138.779 E55.22049 ; infill
 G1 X93.859 Y134.201 E55.43301 ; infill
 G1 X94.417 Y134.201 E55.45893 ; infill
 G1 X94.417 Y138.779 E55.67144 ; infill
 G1 X94.976 Y138.779 E55.69737 ; infill
 G1 X94.976 Y134.201 E55.90988 ; infill
 G1 X95.534 Y134.201 E55.93580 ; infill
 G1 X95.534 Y138.779 E56.14832 ; infill
 G1 X96.092 Y138.779 E56.17424 ; infill
 G1 X96.092 Y134.201 E56.38676 ; infill
 G1 X96.651 Y134.201 E56.41268 ; infill
 G1 X96.651 Y138.779 E56.62519 ; infill
 G1 X97.209 Y138.779 E56.65112 ; infill
 G1 X97.209 Y134.201 E56.86363 ; infill
 G1 X97.767 Y134.201 E56.88955 ; infill
 G1 X97.767 Y138.779 E57.10207 ; infill
 G1 X98.326 Y138.779 E57.12799 ; infill
 G1 X98.326 Y134.201 E57.34051 ; infill
 G1 X98.884 Y134.201 E57.36643 ; infill
 G1 X98.884 Y138.779 E57.57894 ; infill
 G1 X99.443 Y138.779 E57.60487 ; infill
 G1 X99.443 Y134.201 E57.81738 ; infill
 G1 X100.001 Y134.201 E57.84330 ; infill
 G1 X100.001 Y138.779 E58.05582 ; infill
 G1 X100.559 Y138.779 E58.08174 ; infill
 G1 X100.559 Y134.201 E58.29425 ; infill
 G1 X101.118 Y134.201 E58.32018 ; infill
 G1 X101.118 Y138.779 E58.53269 ; infill
 G1 X101.676 Y138.779 E58.55862 ; infill
 G1 X101.676 Y134.201 E58.77113 ; infill
 G1 X102.234 Y134.201 E58.79705 ; infill
 G1 X102.234 Y138.779 E59.00957 ; infill
 G1 X102.793 Y138.779 E59.03549 ; infill
 G1 X102.793 Y134.201 E59.24800 ; infill
 G1 X103.351 Y134.201 E59.27393 ; infill
 G1 X103.351 Y138.779 E59.48644 ; infill
 G1 X103.909 Y138.779 E59.51237 ; infill
 G1 X103.909 Y134.201 E59.72488 ; infill
 G1 X104.468 Y134.201 E59.75080 ; infill
 G1 X104.468 Y138.779 E59.96332 ; infill
 G1 X105.026 Y138.779 E59.98924 ; infill
 G1 X105.026 Y134.201 E60.20175 ; infill
 G1 X105.585 Y134.201 E60.22768 ; infill
 G1 X105.585 Y138.779 E60.44019 ; infill
 G1 X106.143 Y138.743 E60.46617 ; infill
 G1 X106.143 Y134.201 E60.67702 ; infill
 G1 X106.701 Y134.201 E60.70295 ; infill
 G1 X106.701 Y138.675 E60.91065 ; infill
 G1 X107.260 Y138.384 E60.93989 ; infill
 G1 X107.260 Y134.201 E61.13408 ; infill
 G1 X107.818 Y135.966 F12000.000 ; move to first infill point
 G1 X107.818 Y137.597 E61.20979 F7200.000 ; infill
 G1 F9600
 G1 X107.818 Y135.966 E60.82247 ; wipe and retract
 G1 E56.20979 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z1.800 F12000.000 ; lift Z
 G1 X105.026 Y119.272 F12000.000 ; move to first infill point
 G1 Z0.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X105.026 Y121.828 E5.11868 F7200.000 ; infill
 G1 X104.468 Y121.828 E5.14461 ; infill
 G1 X104.468 Y115.933 E5.41831 ; infill
 G1 X103.909 Y112.594 F12000.000 ; move to first infill point
 G1 X103.909 Y121.828 E5.84703 F7200.000 ; infill
 G1 X103.351 Y121.828 E5.87296 ; infill
 G1 X103.351 Y109.255 E6.45670 ; infill
 G1 X102.793 Y105.916 F12000.000 ; move to first infill point
 G1 X102.793 Y121.828 E7.19546 F7200.000 ; infill
 G1 X102.234 Y121.828 E7.22138 ; infill
 G1 X102.234 Y102.577 E8.11517 ; infill
 G1 X101.676 Y99.238 F12000.000 ; move to first infill point
 G1 X101.676 Y121.828 E9.16397 F7200.000 ; infill
 G1 X101.118 Y121.828 E9.18989 ; infill
 G1 X101.118 Y95.899 E10.39371 ; infill
 G1 X100.559 Y92.560 F12000.000 ; move to first infill point
 G1 X100.559 Y121.828 E11.75255 F7200.000 ; infill
 G1 X100.001 Y121.828 E11.77847 ; infill
 G1 X100.001 Y89.221 E13.29233 ; infill
 G1 X99.443 Y85.882 F12000.000 ; move to first infill point
 G1 X99.443 Y121.828 E14.96121 F7200.000 ; infill
 G1 X98.884 Y121.828 E14.98714 ; infill
 G1 X98.884 Y82.543 E16.81104 ; infill
 G1 X98.326 Y79.205 F12000.000 ; move to first infill point
 G1 X98.326 Y121.828 E18.78996 F7200.000 ; infill
 G1 X97.767 Y121.828 E18.81588 ; infill
 G1 X97.767 Y75.866 E20.94982 ; infill
 G1 X97.209 Y72.527 F12000.000 ; move to first infill point
 G1 X97.209 Y121.828 E23.23878 F7200.000 ; infill
 G1 X96.651 Y121.828 E23.26470 ; infill
 G1 X96.651 Y71.201 E25.61519 ; infill
 G1 X96.092 Y71.201 E25.64112 ; infill
 G1 X96.092 Y121.828 E27.99161 ; infill
 G1 X95.534 Y121.828 E28.01753 ; infill
 G1 X95.534 Y71.201 E30.36802 ; infill
 G1 X94.976 Y71.201 E30.39395 ; infill
 G1 X94.976 Y121.828 E32.74444 ; infill
 G1 F9600
 G1 X94.976 Y101.828 E27.99444 ; wipe and retract
 G1 E27.74444 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z1.800 F12000.000 ; lift Z
 M106 S221.85 ; enable fan
 G1 X95.608 Y132.215 F12000.000 ; move to first perimeter point
 G1 Z1.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X109.346 Y132.215 E5.40791 F7200.000 ; perimeter
 G1 X109.992 Y136.074 E5.52409 ; perimeter
 G1 X109.992 Y137.923 E5.57898 ; perimeter
 G1 X109.148 Y139.531 E5.63290 ; perimeter
 G1 X107.653 Y140.562 E5.68681 ; perimeter
 G1 X105.814 Y140.785 E5.74183 ; perimeter
 G1 X93.363 Y140.785 E6.11153 ; perimeter
 G1 X91.653 Y140.137 E6.16582 ; perimeter
 G1 X90.449 Y138.778 E6.21974 ; perimeter
 G1 X90.008 Y136.991 E6.27438 ; perimeter
 G1 X90.507 Y59.215 E8.58371 ; perimeter
 G1 X96.608 Y59.215 E8.76486 ; perimeter
 G1 X96.608 Y69.215 E9.06178 ; perimeter
 G1 X98.811 Y69.215 E9.12718 ; perimeter
 G1 X107.942 Y123.815 E10.77084 ; perimeter
 G1 X95.608 Y123.815 E11.13704 ; perimeter
 G1 X95.608 Y132.155 E11.38467 ; perimeter
 G1 X95.608 Y132.615 F12000.000 ; move inwards before travel
 G1 X95.251 Y132.572 F12000.000 ; move to first perimeter point
 G1 X109.044 Y132.572 E11.79420 F7200.000 ; perimeter
 G1 X109.635 Y136.104 E11.90053 ; perimeter
 G1 X109.635 Y137.835 E11.95192 ; perimeter
 G1 X108.873 Y139.287 E12.00061 ; perimeter
 G1 X107.523 Y140.218 E12.04931 ; perimeter
 G1 X105.792 Y140.428 E12.10107 ; perimeter
 G1 X93.428 Y140.428 E12.46818 ; perimeter
 G1 X91.862 Y139.834 E12.51792 ; perimeter
 G1 X90.774 Y138.607 E12.56661 ; perimeter
 G1 X90.366 Y136.949 E12.61731 ; perimeter
 G1 X90.862 Y59.572 E14.91479 ; perimeter
 G1 X96.251 Y59.572 E15.07480 ; perimeter
 G1 X96.251 Y69.572 E15.37172 ; perimeter
 G1 X98.509 Y69.572 E15.43875 ; perimeter
 G1 X107.520 Y123.458 E17.06091 ; perimeter
 G1 X95.251 Y123.458 E17.42519 ; perimeter
 G1 X95.251 Y132.512 E17.69402 ; perimeter
 G1 X94.894 Y132.929 F12000.000 ; move to first perimeter point
 G1 X108.742 Y132.929 E18.10518 F7200.000 ; perimeter
 G1 X109.278 Y136.133 E18.20165 ; perimeter
 G1 X109.278 Y137.747 E18.24955 ; perimeter
 G1 X108.597 Y139.043 E18.29302 ; perimeter
 G1 X107.393 Y139.874 E18.33648 ; perimeter
 G1 X105.771 Y140.071 E18.38499 ; perimeter
 G1 X93.493 Y140.071 E18.74952 ; perimeter
 G1 X92.071 Y139.532 E18.79470 ; perimeter
 G1 X91.100 Y138.436 E18.83816 ; perimeter
 G1 X90.723 Y136.906 E18.88493 ; perimeter
 G1 X91.216 Y59.929 E21.17055 ; perimeter
 G1 X95.894 Y59.929 E21.30943 ; perimeter
 G1 X95.894 Y69.929 E21.60634 ; perimeter
 G1 X98.206 Y69.929 E21.67500 ; perimeter
 G1 X107.098 Y123.100 E23.27566 ; perimeter
 G1 X94.894 Y123.100 E23.63803 ; perimeter
 G1 X94.894 Y132.869 E23.92806 ; perimeter
 G1 X94.537 Y133.286 F12000.000 ; move to first perimeter point
 G1 X108.440 Y133.286 E24.34085 F7200.000 ; perimeter
 G1 X108.921 Y136.163 E24.42746 ; perimeter
 G1 X108.921 Y137.659 E24.47187 ; perimeter
 G1 X108.322 Y138.799 E24.51010 ; perimeter
 G1 X107.262 Y139.530 E24.54834 ; perimeter
 G1 X105.749 Y139.714 E24.59360 ; perimeter
 G1 X93.559 Y139.714 E24.95554 ; perimeter
 G1 X92.280 Y139.229 E24.99617 ; perimeter
 G1 X91.426 Y138.265 E25.03440 ; perimeter
 G1 X91.080 Y136.864 E25.07724 ; perimeter
 G1 X91.571 Y60.286 E27.35100 ; perimeter
 G1 X95.537 Y60.286 E27.46874 ; perimeter
 G1 X95.537 Y70.286 E27.76566 ; perimeter
 G1 X97.904 Y70.286 E27.83594 ; perimeter
 G1 X106.677 Y122.743 E29.41510 ; perimeter
 G1 X94.537 Y122.743 E29.77554 ; perimeter
 G1 X94.537 Y133.226 E30.08678 ; perimeter
 G1 X94.180 Y133.643 F12000.000 ; move to first perimeter point
 G1 X108.137 Y133.643 E30.50120 F7200.000 ; perimeter
 G1 X108.564 Y136.193 E30.57795 ; perimeter
 G1 X108.564 Y137.571 E30.61886 ; perimeter
 G1 X108.047 Y138.555 E30.65188 ; perimeter
 G1 X107.132 Y139.187 E30.68489 ; perimeter
 G1 X105.728 Y139.357 E30.72689 ; perimeter
 G1 X93.624 Y139.357 E31.08625 ; perimeter
 G1 X92.488 Y138.926 E31.12232 ; perimeter
 G1 X91.751 Y138.094 E31.15533 ; perimeter
 G1 X91.438 Y136.822 E31.19423 ; perimeter
 G1 X91.926 Y60.643 E33.45613 ; perimeter
 G1 X95.180 Y60.643 E33.55274 ; perimeter
 G1 X95.180 Y70.643 E33.84965 ; perimeter
 G1 X97.602 Y70.643 E33.92157 ; perimeter
 G1 X106.255 Y122.386 E35.47923 ; perimeter
 G1 X94.180 Y122.386 E35.83775 ; perimeter
 G1 X94.180 Y133.583 E36.17019 ; perimeter
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 X107.835 Y134.000 E36.58623 F7200.000 ; perimeter
 G1 X108.207 Y136.222 E36.65313 ; perimeter
 G1 X108.207 Y137.482 E36.69055 ; perimeter
 G1 X107.772 Y138.311 E36.71833 ; perimeter
 G1 X107.001 Y138.843 E36.74612 ; perimeter
 G1 X105.706 Y139.000 E36.78487 ; perimeter
 G1 X93.690 Y139.000 E37.14164 ; perimeter
 G1 X92.697 Y138.624 E37.17315 ; perimeter
 G1 X92.077 Y137.923 E37.20094 ; perimeter
 G1 X91.795 Y136.780 E37.23590 ; perimeter
 G1 X92.281 Y61.000 E39.48595 ; perimeter
 G1 X94.823 Y61.000 E39.56142 ; perimeter
 G1 X94.823 Y71.000 E39.85833 ; perimeter
 G1 X97.299 Y71.000 E39.93187 ; perimeter
 G1 X105.833 Y122.029 E41.46804 ; perimeter
 G1 X93.823 Y122.029 E41.82464 ; perimeter
 G1 X93.823 Y133.940 E42.17828 ; perimeter
 G1 X93.621 Y134.135 F12000.000 ; move to first infill point
 G1 X92.017 Y134.135 E42.25295 F7200.000 ; infill
 G1 X92.017 Y133.575 E42.27898 ; infill
 G1 X93.621 Y133.575 E42.35364 ; infill
 G1 X93.621 Y133.016 E42.37967 ; infill
 G1 X92.021 Y133.016 E42.45416 ; infill
 G1 X92.024 Y132.456 E42.48019 ; infill
 G1 X93.621 Y132.456 E42.55451 ; infill
 G1 X93.621 Y131.897 E42.58055 ; infill
 G1 X92.028 Y131.897 E42.65470 ; infill
 G1 X92.031 Y131.337 E42.68074 ; infill
 G1 X93.621 Y131.337 E42.75472 ; infill
 G1 X93.621 Y130.777 E42.78076 ; infill
 G1 X92.035 Y130.777 E42.85458 ; infill
 G1 X92.038 Y130.218 E42.88061 ; infill
 G1 X93.621 Y130.218 E42.95426 ; infill
 G1 X93.621 Y129.658 E42.98030 ; infill
 G1 X92.042 Y129.658 E43.05378 ; infill
 G1 X92.046 Y129.099 E43.07982 ; infill
 G1 X93.621 Y129.099 E43.15314 ; infill
 G1 X93.621 Y128.539 E43.17918 ; infill
 G1 X92.049 Y128.539 E43.25232 ; infill
 G1 X92.053 Y127.979 E43.27836 ; infill
 G1 X93.621 Y127.979 E43.35134 ; infill
 G1 X93.621 Y127.420 E43.37738 ; infill
 G1 X92.056 Y127.420 E43.45020 ; infill
 G1 X92.060 Y126.860 E43.47624 ; infill
 G1 X93.621 Y126.860 E43.54888 ; infill
 G1 X93.621 Y126.301 E43.57492 ; infill
 G1 X92.064 Y126.301 E43.64740 ; infill
 G1 X92.067 Y125.741 E43.67344 ; infill
 G1 X93.621 Y125.741 E43.74576 ; infill
 G1 X93.621 Y125.181 E43.77179 ; infill
 G1 X92.071 Y125.181 E43.84394 ; infill
 G1 X92.074 Y124.622 E43.86998 ; infill
 G1 X93.621 Y124.622 E43.94196 ; infill
 G1 X93.621 Y124.062 E43.96800 ; infill
 G1 X92.078 Y124.062 E44.03981 ; infill
 G1 X92.082 Y123.503 E44.06585 ; infill
 G1 X93.621 Y123.503 E44.13750 ; infill
 G1 X93.621 Y122.943 E44.16353 ; infill
 G1 X92.085 Y122.943 E44.23501 ; infill
 G1 X92.089 Y122.384 E44.26105 ; infill
 G1 X93.621 Y122.384 E44.33236 ; infill
 G1 X93.621 Y121.824 E44.35840 ; infill
 G1 X92.092 Y121.824 E44.42955 ; infill
 G1 X92.096 Y121.264 E44.45559 ; infill
 G1 X105.499 Y121.264 E45.07921 ; infill
 G1 X105.405 Y120.705 E45.10561 ; infill
 G1 X92.099 Y120.705 E45.72472 ; infill
 G1 X92.103 Y120.145 E45.75076 ; infill
 G1 X105.311 Y120.145 E46.36534 ; infill
 G1 X105.218 Y119.586 E46.39174 ; infill
 G1 X92.107 Y119.586 E47.00181 ; infill
 G1 X92.110 Y119.026 E47.02785 ; infill
 G1 X105.124 Y119.026 E47.63339 ; infill
 G1 X105.031 Y118.466 E47.65979 ; infill
 G1 X92.114 Y118.466 E48.26081 ; infill
 G1 X92.117 Y117.907 E48.28685 ; infill
 G1 X104.937 Y117.907 E48.88335 ; infill
 G1 X104.844 Y117.347 E48.90975 ; infill
 G1 X92.121 Y117.347 E49.50173 ; infill
 G1 X92.125 Y116.788 E49.52777 ; infill
 G1 X104.750 Y116.788 E50.11523 ; infill
 G1 X104.656 Y116.228 E50.14163 ; infill
 G1 X92.128 Y116.228 E50.72457 ; infill
 G1 X92.132 Y115.668 E50.75060 ; infill
 G1 X104.563 Y115.668 E51.32902 ; infill
 G1 X104.469 Y115.109 E51.35542 ; infill
 G1 X92.135 Y115.109 E51.92932 ; infill
 G1 X92.139 Y114.549 E51.95535 ; infill
 G1 X104.376 Y114.549 E52.52473 ; infill
 G1 X104.282 Y113.990 E52.55113 ; infill
 G1 X92.143 Y113.990 E53.11598 ; infill
 G1 X92.146 Y113.430 E53.14202 ; infill
 G1 X104.189 Y113.430 E53.70235 ; infill
 G1 X104.095 Y112.871 E53.72875 ; infill
 G1 X92.150 Y112.871 E54.28456 ; infill
 G1 X92.153 Y112.311 E54.31060 ; infill
 G1 X104.001 Y112.311 E54.86189 ; infill
 G1 X103.908 Y111.751 E54.88829 ; infill
 G1 X92.157 Y111.751 E55.43506 ; infill
 G1 X92.160 Y111.192 E55.46110 ; infill
 G1 X103.814 Y111.192 E56.00334 ; infill
 G1 X103.721 Y110.632 E56.02974 ; infill
 G1 X92.164 Y110.632 E56.56747 ; infill
 G1 X92.168 Y110.073 E56.59351 ; infill
 G1 X103.627 Y110.073 E57.12671 ; infill
 G1 X103.533 Y109.513 E57.15311 ; infill
 G1 X92.171 Y109.513 E57.68180 ; infill
 G1 X92.175 Y108.953 E57.70783 ; infill
 G1 X103.440 Y108.953 E58.23200 ; infill
 G1 X103.346 Y108.394 E58.25840 ; infill
 G1 X92.178 Y108.394 E58.77804 ; infill
 G1 X92.182 Y107.834 E58.80408 ; infill
 G1 X103.253 Y107.834 E59.31920 ; infill
 G1 X103.159 Y107.275 E59.34560 ; infill
 G1 X92.186 Y107.275 E59.85620 ; infill
 G1 X92.189 Y106.715 E59.88223 ; infill
 G1 X103.066 Y106.715 E60.38831 ; infill
 G1 X102.972 Y106.156 E60.41471 ; infill
 G1 X92.193 Y106.156 E60.91627 ; infill
 G1 X92.196 Y105.596 E60.94231 ; infill
 G1 X102.878 Y105.596 E61.43934 ; infill
 G1 X102.785 Y105.036 E61.46574 ; infill
 G1 X92.200 Y105.036 E61.95826 ; infill
 G1 X92.203 Y104.477 E61.98430 ; infill
 G1 X102.691 Y104.477 E62.47229 ; infill
 G1 X102.598 Y103.917 E62.49869 ; infill
 G1 X92.207 Y103.917 E62.98216 ; infill
 G1 X92.211 Y103.358 E63.00820 ; infill
 G1 X102.504 Y103.358 E63.48715 ; infill
 G1 X102.411 Y102.798 E63.51355 ; infill
 G1 X92.214 Y102.798 E63.98798 ; infill
 G1 X92.218 Y102.238 E64.01402 ; infill
 G1 X102.317 Y102.238 E64.48393 ; infill
 G1 X102.223 Y101.679 E64.51033 ; infill
 G1 X92.221 Y101.679 E64.97572 ; infill
 G1 X92.225 Y101.119 E65.00175 ; infill
 G1 X102.130 Y101.119 E65.46262 ; infill
 G1 X102.036 Y100.560 E65.48902 ; infill
 G1 X92.229 Y100.560 E65.94537 ; infill
 G1 X92.232 Y100.000 E65.97140 ; infill
 G1 X101.943 Y100.000 E66.42323 ; infill
 G1 X101.849 Y99.440 E66.44963 ; infill
 G1 X92.236 Y99.440 E66.89693 ; infill
 G1 X92.239 Y98.881 E66.92297 ; infill
 G1 X101.755 Y98.881 E67.36575 ; infill
 G1 X101.662 Y98.321 E67.39215 ; infill
 G1 X92.243 Y98.321 E67.83041 ; infill
 G1 X92.247 Y97.762 E67.85645 ; infill
 G1 X101.568 Y97.762 E68.29019 ; infill
 G1 X101.475 Y97.202 E68.31659 ; infill
 G1 X92.250 Y97.202 E68.74581 ; infill
 G1 X92.254 Y96.643 E68.77185 ; infill
 G1 X101.381 Y96.643 E69.19655 ; infill
 G1 X101.288 Y96.083 E69.22294 ; infill
 G1 X92.257 Y96.083 E69.64312 ; infill
 G1 X92.261 Y95.523 E69.66916 ; infill
 G1 X101.194 Y95.523 E70.08482 ; infill
 G1 X101.100 Y94.964 E70.11121 ; infill
 G1 X92.264 Y94.964 E70.52235 ; infill
 G1 X92.268 Y94.404 E70.54839 ; infill
 G1 X101.007 Y94.404 E70.95500 ; infill
 G1 X100.913 Y93.845 E70.98140 ; infill
 G1 X92.272 Y93.845 E71.38349 ; infill
 G1 X92.275 Y93.285 E71.40953 ; infill
 G1 X100.820 Y93.285 E71.80710 ; infill
 G1 X100.726 Y92.725 E71.83350 ; infill
 G1 X92.279 Y92.725 E72.22655 ; infill
 G1 X92.282 Y92.166 E72.25259 ; infill
 G1 X100.632 Y92.166 E72.64112 ; infill
 G1 X100.539 Y91.606 E72.66752 ; infill
 G1 X92.286 Y91.606 E73.05152 ; infill
 G1 X92.290 Y91.047 E73.07756 ; infill
 G1 X100.445 Y91.047 E73.45705 ; infill
 G1 X100.352 Y90.487 E73.48345 ; infill
 G1 X92.293 Y90.487 E73.85841 ; infill
 G1 X92.297 Y89.927 E73.88445 ; infill
 G1 X100.258 Y89.927 E74.25489 ; infill
 G1 X100.165 Y89.368 E74.28129 ; infill
 G1 X92.300 Y89.368 E74.64722 ; infill
 G1 X92.304 Y88.808 E74.67325 ; infill
 G1 X100.071 Y88.808 E75.03466 ; infill
 G1 X99.977 Y88.249 E75.06106 ; infill
 G1 X92.308 Y88.249 E75.41794 ; infill
 G1 X92.311 Y87.689 E75.44397 ; infill
 G1 X99.884 Y87.689 E75.79633 ; infill
 G1 X99.790 Y87.130 E75.82273 ; infill
 G1 X92.315 Y87.130 E76.17057 ; infill
 G1 X92.318 Y86.570 E76.19661 ; infill
 G1 X99.697 Y86.570 E76.53993 ; infill
 G1 X99.603 Y86.010 E76.56633 ; infill
 G1 X92.322 Y86.010 E76.90512 ; infill
 G1 X92.325 Y85.451 E76.93116 ; infill
 G1 X99.510 Y85.451 E77.26544 ; infill
 G1 X99.416 Y84.891 E77.29183 ; infill
 G1 X92.329 Y84.891 E77.62159 ; infill
 G1 X92.333 Y84.332 E77.64763 ; infill
 G1 X99.322 Y84.332 E77.97286 ; infill
 G1 X99.229 Y83.772 E77.99926 ; infill
 G1 X92.336 Y83.772 E78.31997 ; infill
 G1 X92.340 Y83.212 E78.34601 ; infill
 G1 X99.135 Y83.212 E78.66220 ; infill
 G1 X99.042 Y82.653 E78.68860 ; infill
 G1 X92.343 Y82.653 E79.00027 ; infill
 G1 X92.347 Y82.093 E79.02630 ; infill
 G1 X98.948 Y82.093 E79.33345 ; infill
 G1 X98.854 Y81.534 E79.35985 ; infill
 G1 X92.351 Y81.534 E79.66248 ; infill
 G1 X92.354 Y80.974 E79.68852 ; infill
 G1 X98.761 Y80.974 E79.98662 ; infill
 G1 X98.667 Y80.414 E80.01302 ; infill
 G1 X92.358 Y80.414 E80.30661 ; infill
 G1 X92.361 Y79.855 E80.33264 ; infill
 G1 X98.574 Y79.855 E80.62171 ; infill
 G1 X98.480 Y79.295 E80.64811 ; infill
 G1 X92.365 Y79.295 E80.93265 ; infill
 G1 X92.368 Y78.736 E80.95869 ; infill
 G1 X98.387 Y78.736 E81.23871 ; infill
 G1 X98.293 Y78.176 E81.26511 ; infill
 G1 X92.372 Y78.176 E81.54061 ; infill
 G1 X92.376 Y77.617 E81.56665 ; infill
 G1 X98.199 Y77.617 E81.83763 ; infill
 G1 X98.106 Y77.057 E81.86402 ; infill
 G1 X92.379 Y77.057 E82.13048 ; infill
 G1 X92.383 Y76.497 E82.15652 ; infill
 G1 X98.012 Y76.497 E82.41846 ; infill
 G1 X97.919 Y75.938 E82.44486 ; infill
 G1 X92.386 Y75.938 E82.70227 ; infill
 G1 X92.390 Y75.378 E82.72831 ; infill
 G1 X97.825 Y75.378 E82.98120 ; infill
 G1 X97.732 Y74.819 E83.00760 ; infill
 G1 X92.394 Y74.819 E83.25598 ; infill
 G1 X92.397 Y74.259 E83.28201 ; infill
 G1 X97.638 Y74.259 E83.52587 ; infill
 G1 X97.544 Y73.699 E83.55227 ; infill
 G1 X92.401 Y73.699 E83.79160 ; infill
 G1 X92.404 Y73.140 E83.81763 ; infill
 G1 X97.451 Y73.140 E84.05244 ; infill
 G1 X97.357 Y72.580 E84.07884 ; infill
 G1 X92.408 Y72.580 E84.30913 ; infill
 G1 X92.412 Y72.021 E84.33517 ; infill
 G1 X97.264 Y72.021 E84.56094 ; infill
 G1 X97.170 Y71.461 E84.58734 ; infill
 G1 X92.415 Y71.461 E84.80858 ; infill
 G1 X94.621 Y70.901 F12000.000 ; move to first infill point
 G1 X92.419 Y70.901 E84.91107 F7200.000 ; infill
 G1 X92.422 Y70.342 E84.93711 ; infill
 G1 X94.621 Y70.342 E85.03943 ; infill
 G1 X94.621 Y69.782 E85.06547 ; infill
 G1 X92.426 Y69.782 E85.16762 ; infill
 G1 X92.429 Y69.223 E85.19366 ; infill
 G1 X94.621 Y69.223 E85.29564 ; infill
 G1 X94.621 Y68.663 E85.32168 ; infill
 G1 X92.433 Y68.663 E85.42350 ; infill
 G1 X92.437 Y68.104 E85.44954 ; infill
 G1 X94.621 Y68.104 E85.55119 ; infill
 G1 X94.621 Y67.544 E85.57723 ; infill
 G1 X92.440 Y67.544 E85.67872 ; infill
 G1 X92.444 Y66.984 E85.70475 ; infill
 G1 X94.621 Y66.984 E85.80607 ; infill
 G1 X94.621 Y66.425 E85.83211 ; infill
 G1 X92.447 Y66.425 E85.93326 ; infill
 G1 X92.451 Y65.865 E85.95930 ; infill
 G1 X94.621 Y65.865 E86.06029 ; infill
 G1 X94.621 Y65.306 E86.08632 ; infill
 G1 X92.455 Y65.306 E86.18714 ; infill
 G1 X92.458 Y64.746 E86.21318 ; infill
 G1 X94.621 Y64.746 E86.31383 ; infill
 G1 X94.621 Y64.186 E86.33987 ; infill
 G1 X92.462 Y64.186 E86.44035 ; infill
 G1 X92.465 Y63.627 E86.46639 ; infill
 G1 X94.621 Y63.627 E86.56671 ; infill
 G1 X94.621 Y63.067 E86.59275 ; infill
 G1 X92.469 Y63.067 E86.69290 ; infill
 G1 X92.473 Y62.508 E86.71894 ; infill
 G1 X94.621 Y62.508 E86.81892 ; infill
 G1 X94.621 Y61.948 E86.84496 ; infill
 G1 X92.476 Y61.948 E86.94477 ; infill
 G1 X92.480 Y61.388 E86.97081 ; infill
 G1 X94.621 Y61.388 E87.07046 ; infill
 G1 X92.017 Y134.694 F12000.000 ; move to first infill point
 G1 X107.745 Y134.694 E87.80228 F7200.000 ; infill
 G1 X107.838 Y135.254 E87.82867 ; infill
 G1 X92.017 Y135.254 E88.56484 ; infill
 G1 X92.017 Y135.814 E88.59088 ; infill
 G1 X107.932 Y135.814 E89.33140 ; infill
 G1 X107.985 Y136.373 E89.35756 ; infill
 G1 X92.017 Y136.373 E90.10057 ; infill
 G1 X92.045 Y136.933 E90.12664 ; infill
 G1 X107.985 Y136.933 E90.86832 ; infill
 G1 X107.952 Y137.492 E90.89441 ; infill
 G1 X92.183 Y137.492 E91.62814 ; infill
 G1 X92.516 Y138.052 E91.65844 ; infill
 G1 X107.659 Y138.052 E92.36302 ; infill
 G1 X106.015 Y138.612 F12000.000 ; move to first infill point
 G1 X93.538 Y138.612 E92.94357 F7200.000 ; infill
 M106 S224.4 ; enable fan
 G1 F9600
 G1 X106.015 Y138.612 E89.98027 ; wipe and retract
 G1 E87.94357 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z2.000 F12000.000 ; lift Z
 G1 X95.608 Y132.215 F12000.000 ; move to first perimeter point
 G1 Z1.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X109.346 Y132.215 E5.40791 F7200.000 ; perimeter
 G1 X109.992 Y136.074 E5.52409 ; perimeter
 G1 X109.992 Y137.923 E5.57898 ; perimeter
 G1 X109.148 Y139.531 E5.63290 ; perimeter
 G1 X107.653 Y140.562 E5.68681 ; perimeter
 G1 X105.814 Y140.785 E5.74183 ; perimeter
 G1 X93.363 Y140.785 E6.11153 ; perimeter
 G1 X91.653 Y140.137 E6.16582 ; perimeter
 G1 X90.449 Y138.778 E6.21974 ; perimeter
 G1 X90.008 Y136.991 E6.27438 ; perimeter
 G1 X90.507 Y59.215 E8.58371 ; perimeter
 G1 X96.608 Y59.215 E8.76486 ; perimeter
 G1 X96.608 Y69.215 E9.06178 ; perimeter
 G1 X98.811 Y69.215 E9.12718 ; perimeter
 G1 X107.942 Y123.815 E10.77084 ; perimeter
 G1 X95.608 Y123.815 E11.13704 ; perimeter
 G1 X95.608 Y132.155 E11.38467 ; perimeter
 G1 X95.608 Y132.615 F12000.000 ; move inwards before travel
 G1 X95.251 Y132.572 F12000.000 ; move to first perimeter point
 G1 X109.044 Y132.572 E11.79420 F7200.000 ; perimeter
 G1 X109.635 Y136.104 E11.90053 ; perimeter
 G1 X109.635 Y137.835 E11.95192 ; perimeter
 G1 X108.873 Y139.287 E12.00061 ; perimeter
 G1 X107.523 Y140.218 E12.04931 ; perimeter
 G1 X105.792 Y140.428 E12.10107 ; perimeter
 G1 X93.428 Y140.428 E12.46818 ; perimeter
 G1 X91.862 Y139.834 E12.51792 ; perimeter
 G1 X90.774 Y138.607 E12.56661 ; perimeter
 G1 X90.366 Y136.949 E12.61731 ; perimeter
 G1 X90.862 Y59.572 E14.91479 ; perimeter
 G1 X96.251 Y59.572 E15.07480 ; perimeter
 G1 X96.251 Y69.572 E15.37172 ; perimeter
 G1 X98.509 Y69.572 E15.43875 ; perimeter
 G1 X107.520 Y123.458 E17.06091 ; perimeter
 G1 X95.251 Y123.458 E17.42519 ; perimeter
 G1 X95.251 Y132.512 E17.69402 ; perimeter
 G1 X94.894 Y132.929 F12000.000 ; move to first perimeter point
 G1 X108.742 Y132.929 E18.10518 F7200.000 ; perimeter
 G1 X109.278 Y136.133 E18.20165 ; perimeter
 G1 X109.278 Y137.747 E18.24955 ; perimeter
 G1 X108.597 Y139.043 E18.29302 ; perimeter
 G1 X107.393 Y139.874 E18.33648 ; perimeter
 G1 X105.771 Y140.071 E18.38499 ; perimeter
 G1 X93.493 Y140.071 E18.74952 ; perimeter
 G1 X92.071 Y139.532 E18.79470 ; perimeter
 G1 X91.100 Y138.436 E18.83816 ; perimeter
 G1 X90.723 Y136.906 E18.88493 ; perimeter
 G1 X91.216 Y59.929 E21.17055 ; perimeter
 G1 X95.894 Y59.929 E21.30943 ; perimeter
 G1 X95.894 Y69.929 E21.60634 ; perimeter
 G1 X98.206 Y69.929 E21.67500 ; perimeter
 G1 X107.098 Y123.100 E23.27566 ; perimeter
 G1 X94.894 Y123.100 E23.63803 ; perimeter
 G1 X94.894 Y132.869 E23.92806 ; perimeter
 G1 X94.537 Y133.286 F12000.000 ; move to first perimeter point
 G1 X108.440 Y133.286 E24.34085 F7200.000 ; perimeter
 G1 X108.921 Y136.163 E24.42746 ; perimeter
 G1 X108.921 Y137.659 E24.47187 ; perimeter
 G1 X108.322 Y138.799 E24.51010 ; perimeter
 G1 X107.262 Y139.530 E24.54834 ; perimeter
 G1 X105.749 Y139.714 E24.59360 ; perimeter
 G1 X93.559 Y139.714 E24.95554 ; perimeter
 G1 X92.280 Y139.229 E24.99617 ; perimeter
 G1 X91.426 Y138.265 E25.03440 ; perimeter
 G1 X91.080 Y136.864 E25.07724 ; perimeter
 G1 X91.571 Y60.286 E27.35100 ; perimeter
 G1 X95.537 Y60.286 E27.46874 ; perimeter
 G1 X95.537 Y70.286 E27.76566 ; perimeter
 G1 X97.904 Y70.286 E27.83594 ; perimeter
 G1 X106.677 Y122.743 E29.41510 ; perimeter
 G1 X94.537 Y122.743 E29.77555 ; perimeter
 G1 X94.537 Y133.226 E30.08678 ; perimeter
 G1 X94.180 Y133.643 F12000.000 ; move to first perimeter point
 G1 X108.137 Y133.643 E30.50120 F7200.000 ; perimeter
 G1 X108.564 Y136.193 E30.57795 ; perimeter
 G1 X108.564 Y137.571 E30.61886 ; perimeter
 G1 X108.047 Y138.555 E30.65188 ; perimeter
 G1 X107.132 Y139.187 E30.68489 ; perimeter
 G1 X105.728 Y139.357 E30.72689 ; perimeter
 G1 X93.624 Y139.357 E31.08625 ; perimeter
 G1 X92.488 Y138.926 E31.12232 ; perimeter
 G1 X91.751 Y138.094 E31.15533 ; perimeter
 G1 X91.438 Y136.822 E31.19423 ; perimeter
 G1 X91.926 Y60.643 E33.45613 ; perimeter
 G1 X95.180 Y60.643 E33.55274 ; perimeter
 G1 X95.180 Y70.643 E33.84965 ; perimeter
 G1 X97.602 Y70.643 E33.92157 ; perimeter
 G1 X106.255 Y122.386 E35.47923 ; perimeter
 G1 X94.180 Y122.386 E35.83775 ; perimeter
 G1 X94.180 Y133.583 E36.17019 ; perimeter
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 X107.835 Y134.000 E36.58623 F7200.000 ; perimeter
 G1 X108.207 Y136.222 E36.65313 ; perimeter
 G1 X108.207 Y137.482 E36.69055 ; perimeter
 G1 X107.772 Y138.311 E36.71833 ; perimeter
 G1 X107.001 Y138.843 E36.74612 ; perimeter
 G1 X105.706 Y139.000 E36.78487 ; perimeter
 G1 X93.690 Y139.000 E37.14164 ; perimeter
 G1 X92.697 Y138.624 E37.17315 ; perimeter
 G1 X92.077 Y137.923 E37.20094 ; perimeter
 G1 X91.795 Y136.780 E37.23590 ; perimeter
 G1 X92.281 Y61.000 E39.48595 ; perimeter
 G1 X94.823 Y61.000 E39.56142 ; perimeter
 G1 X94.823 Y71.000 E39.85833 ; perimeter
 G1 X97.299 Y71.000 E39.93187 ; perimeter
 G1 X105.833 Y122.029 E41.46804 ; perimeter
 G1 X93.823 Y122.029 E41.82464 ; perimeter
 G1 X93.823 Y133.940 E42.17828 ; perimeter
 G1 X92.184 Y133.450 F12000.000 ; move to first infill point
 G1 X92.184 Y136.984 E42.34240 F7200.000 ; infill
 G1 X92.742 Y138.286 F12000.000 ; move to first infill point
 G1 X92.742 Y61.221 E45.92035 F7200.000 ; infill
 G1 X94.417 Y61.221 F12000.000 ; move to first infill point
 G1 X94.417 Y121.828 E48.73419 F7200.000 ; infill
 G1 X93.859 Y121.828 E48.76012 ; infill
 G1 X93.859 Y61.221 E51.57396 ; infill
 G1 X93.301 Y61.221 E51.59988 ; infill
 G1 X93.301 Y138.625 E55.19361 ; infill
 G1 X93.859 Y138.779 E55.22049 ; infill
 G1 X93.859 Y134.201 E55.43301 ; infill
 G1 X94.417 Y134.201 E55.45893 ; infill
 G1 X94.417 Y138.779 E55.67144 ; infill
 G1 X94.976 Y138.779 E55.69737 ; infill
 G1 X94.976 Y134.201 E55.90988 ; infill
 G1 X95.534 Y134.201 E55.93580 ; infill
 G1 X95.534 Y138.779 E56.14832 ; infill
 G1 X96.092 Y138.779 E56.17424 ; infill
 G1 X96.092 Y134.201 E56.38676 ; infill
 G1 X96.651 Y134.201 E56.41268 ; infill
 G1 X96.651 Y138.779 E56.62519 ; infill
 G1 X97.209 Y138.779 E56.65112 ; infill
 G1 X97.209 Y134.201 E56.86363 ; infill
 G1 X97.767 Y134.201 E56.88955 ; infill
 G1 X97.767 Y138.779 E57.10207 ; infill
 G1 X98.326 Y138.779 E57.12799 ; infill
 G1 X98.326 Y134.201 E57.34051 ; infill
 G1 X98.884 Y134.201 E57.36643 ; infill
 G1 X98.884 Y138.779 E57.57894 ; infill
 G1 X99.443 Y138.779 E57.60487 ; infill
 G1 X99.443 Y134.201 E57.81738 ; infill
 G1 X100.001 Y134.201 E57.84330 ; infill
 G1 X100.001 Y138.779 E58.05582 ; infill
 G1 X100.559 Y138.779 E58.08174 ; infill
 G1 X100.559 Y134.201 E58.29425 ; infill
 G1 X101.118 Y134.201 E58.32018 ; infill
 G1 X101.118 Y138.779 E58.53269 ; infill
 G1 X101.676 Y138.779 E58.55862 ; infill
 G1 X101.676 Y134.201 E58.77113 ; infill
 G1 X102.234 Y134.201 E58.79705 ; infill
 G1 X102.234 Y138.779 E59.00957 ; infill
 G1 X102.793 Y138.779 E59.03549 ; infill
 G1 X102.793 Y134.201 E59.24800 ; infill
 G1 X103.351 Y134.201 E59.27393 ; infill
 G1 X103.351 Y138.779 E59.48644 ; infill
 G1 X103.909 Y138.779 E59.51237 ; infill
 G1 X103.909 Y134.201 E59.72488 ; infill
 G1 X104.468 Y134.201 E59.75080 ; infill
 G1 X104.468 Y138.779 E59.96332 ; infill
 G1 X105.026 Y138.779 E59.98924 ; infill
 G1 X105.026 Y134.201 E60.20175 ; infill
 G1 X105.585 Y134.201 E60.22768 ; infill
 G1 X105.585 Y138.779 E60.44019 ; infill
 G1 X106.143 Y138.743 E60.46617 ; infill
 G1 X106.143 Y134.201 E60.67702 ; infill
 G1 X106.701 Y134.201 E60.70295 ; infill
 G1 X106.701 Y138.675 E60.91065 ; infill
 G1 X107.260 Y138.384 E60.93989 ; infill
 G1 X107.260 Y134.201 E61.13408 ; infill
 G1 X107.818 Y135.966 F12000.000 ; move to first infill point
 G1 X107.818 Y137.597 E61.20979 F7200.000 ; infill
 G1 F9600
 G1 X107.818 Y135.966 E60.82247 ; wipe and retract
 G1 E56.20979 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z2.200 F12000.000 ; lift Z
 G1 X105.026 Y119.272 F12000.000 ; move to first infill point
 G1 Z1.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X105.026 Y121.828 E5.11868 F7200.000 ; infill
 G1 X104.468 Y121.828 E5.14461 ; infill
 G1 X104.468 Y115.933 E5.41831 ; infill
 G1 X103.909 Y112.594 F12000.000 ; move to first infill point
 G1 X103.909 Y121.828 E5.84703 F7200.000 ; infill
 G1 X103.351 Y121.828 E5.87296 ; infill
 G1 X103.351 Y109.255 E6.45670 ; infill
 G1 X102.793 Y105.916 F12000.000 ; move to first infill point
 G1 X102.793 Y121.828 E7.19546 F7200.000 ; infill
 G1 X102.234 Y121.828 E7.22138 ; infill
 G1 X102.234 Y102.577 E8.11517 ; infill
 G1 X101.676 Y99.238 F12000.000 ; move to first infill point
 G1 X101.676 Y121.828 E9.16397 F7200.000 ; infill
 G1 X101.118 Y121.828 E9.18989 ; infill
 G1 X101.118 Y95.899 E10.39371 ; infill
 G1 X100.559 Y92.560 F12000.000 ; move to first infill point
 G1 X100.559 Y121.828 E11.75255 F7200.000 ; infill
 G1 X100.001 Y121.828 E11.77847 ; infill
 G1 X100.001 Y89.221 E13.29233 ; infill
 G1 X99.443 Y85.882 F12000.000 ; move to first infill point
 G1 X99.443 Y121.828 E14.96121 F7200.000 ; infill
 G1 X98.884 Y121.828 E14.98714 ; infill
 G1 X98.884 Y82.543 E16.81104 ; infill
 G1 X98.326 Y79.205 F12000.000 ; move to first infill point
 G1 X98.326 Y121.828 E18.78996 F7200.000 ; infill
 G1 X97.767 Y121.828 E18.81588 ; infill
 G1 X97.767 Y75.866 E20.94982 ; infill
 G1 X97.209 Y72.527 F12000.000 ; move to first infill point
 G1 X97.209 Y121.828 E23.23878 F7200.000 ; infill
 G1 X96.651 Y121.828 E23.26470 ; infill
 G1 X96.651 Y71.201 E25.61519 ; infill
 G1 X96.092 Y71.201 E25.64112 ; infill
 G1 X96.092 Y121.828 E27.99161 ; infill
 G1 X95.534 Y121.828 E28.01753 ; infill
 G1 X95.534 Y71.201 E30.36802 ; infill
 G1 X94.976 Y71.201 E30.39395 ; infill
 G1 X94.976 Y121.828 E32.74444 ; infill
 G1 F9600
 G1 X94.976 Y101.828 E27.99444 ; wipe and retract
 G1 E27.74444 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z2.200 F12000.000 ; lift Z
 G1 Z1.200 F12000.000 ; move to next layer (10)
 M106 S244.8 ; enable fan
 G1 Z2.200 F12000.000 ; lift Z
 G1 X95.608 Y132.215 F12000.000 ; move to first perimeter point
 G1 Z1.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X109.346 Y132.215 E5.40791 F7200.000 ; perimeter
 G1 X109.992 Y136.074 E5.52409 ; perimeter
 G1 X109.992 Y137.923 E5.57898 ; perimeter
 G1 X109.148 Y139.531 E5.63290 ; perimeter
 G1 X107.653 Y140.562 E5.68681 ; perimeter
 G1 X105.814 Y140.785 E5.74183 ; perimeter
 G1 X93.363 Y140.785 E6.11153 ; perimeter
 G1 X91.653 Y140.137 E6.16582 ; perimeter
 G1 X90.449 Y138.778 E6.21974 ; perimeter
 G1 X90.008 Y136.991 E6.27438 ; perimeter
 G1 X90.507 Y59.215 E8.58371 ; perimeter
 G1 X96.608 Y59.215 E8.76486 ; perimeter
 G1 X96.608 Y69.215 E9.06178 ; perimeter
 G1 X98.811 Y69.215 E9.12718 ; perimeter
 G1 X107.942 Y123.815 E10.77084 ; perimeter
 G1 X95.608 Y123.815 E11.13704 ; perimeter
 G1 X95.608 Y132.155 E11.38467 ; perimeter
 G1 X95.608 Y132.615 F12000.000 ; move inwards before travel
 G1 X95.251 Y132.572 F12000.000 ; move to first perimeter point
 G1 X109.044 Y132.572 E11.79420 F7200.000 ; perimeter
 G1 X109.635 Y136.104 E11.90053 ; perimeter
 G1 X109.635 Y137.835 E11.95192 ; perimeter
 G1 X108.873 Y139.287 E12.00061 ; perimeter
 G1 X107.523 Y140.218 E12.04931 ; perimeter
 G1 X105.792 Y140.428 E12.10107 ; perimeter
 G1 X93.428 Y140.428 E12.46818 ; perimeter
 G1 X91.862 Y139.834 E12.51792 ; perimeter
 G1 X90.774 Y138.607 E12.56661 ; perimeter
 G1 X90.366 Y136.949 E12.61731 ; perimeter
 G1 X90.862 Y59.572 E14.91479 ; perimeter
 G1 X96.251 Y59.572 E15.07480 ; perimeter
 G1 X96.251 Y69.572 E15.37172 ; perimeter
 G1 X98.509 Y69.572 E15.43875 ; perimeter
 G1 X107.520 Y123.458 E17.06091 ; perimeter
 G1 X95.251 Y123.458 E17.42519 ; perimeter
 G1 X95.251 Y132.512 E17.69402 ; perimeter
 G1 X94.894 Y132.929 F12000.000 ; move to first perimeter point
 G1 X108.742 Y132.929 E18.10518 F7200.000 ; perimeter
 G1 X109.278 Y136.133 E18.20165 ; perimeter
 G1 X109.278 Y137.747 E18.24955 ; perimeter
 G1 X108.597 Y139.043 E18.29302 ; perimeter
 G1 X107.393 Y139.874 E18.33648 ; perimeter
 G1 X105.771 Y140.071 E18.38499 ; perimeter
 G1 X93.493 Y140.071 E18.74952 ; perimeter
 G1 X92.071 Y139.532 E18.79470 ; perimeter
 G1 X91.100 Y138.436 E18.83816 ; perimeter
 G1 X90.723 Y136.906 E18.88493 ; perimeter
 G1 X91.216 Y59.929 E21.17055 ; perimeter
 G1 X95.894 Y59.929 E21.30943 ; perimeter
 G1 X95.894 Y69.929 E21.60634 ; perimeter
 G1 X98.206 Y69.929 E21.67500 ; perimeter
 G1 X107.098 Y123.100 E23.27566 ; perimeter
 G1 X94.894 Y123.100 E23.63803 ; perimeter
 G1 X94.894 Y132.869 E23.92806 ; perimeter
 G1 X94.537 Y133.286 F12000.000 ; move to first perimeter point
 G1 X108.440 Y133.286 E24.34085 F7200.000 ; perimeter
 G1 X108.921 Y136.163 E24.42746 ; perimeter
 G1 X108.921 Y137.659 E24.47187 ; perimeter
 G1 X108.322 Y138.799 E24.51010 ; perimeter
 G1 X107.262 Y139.530 E24.54834 ; perimeter
 G1 X105.749 Y139.714 E24.59360 ; perimeter
 G1 X93.559 Y139.714 E24.95554 ; perimeter
 G1 X92.280 Y139.229 E24.99617 ; perimeter
 G1 X91.426 Y138.265 E25.03440 ; perimeter
 G1 X91.080 Y136.864 E25.07724 ; perimeter
 G1 X91.571 Y60.286 E27.35100 ; perimeter
 G1 X95.537 Y60.286 E27.46874 ; perimeter
 G1 X95.537 Y70.286 E27.76566 ; perimeter
 G1 X97.904 Y70.286 E27.83594 ; perimeter
 G1 X106.677 Y122.743 E29.41510 ; perimeter
 G1 X94.537 Y122.743 E29.77555 ; perimeter
 G1 X94.537 Y133.226 E30.08678 ; perimeter
 G1 X94.180 Y133.643 F12000.000 ; move to first perimeter point
 G1 X108.137 Y133.643 E30.50120 F7200.000 ; perimeter
 G1 X108.564 Y136.193 E30.57795 ; perimeter
 G1 X108.564 Y137.571 E30.61886 ; perimeter
 G1 X108.047 Y138.555 E30.65188 ; perimeter
 G1 X107.132 Y139.187 E30.68489 ; perimeter
 G1 X105.728 Y139.357 E30.72689 ; perimeter
 G1 X93.624 Y139.357 E31.08625 ; perimeter
 G1 X92.488 Y138.926 E31.12232 ; perimeter
 G1 X91.751 Y138.094 E31.15533 ; perimeter
 G1 X91.438 Y136.822 E31.19423 ; perimeter
 G1 X91.926 Y60.643 E33.45613 ; perimeter
 G1 X95.180 Y60.643 E33.55274 ; perimeter
 G1 X95.180 Y70.643 E33.84965 ; perimeter
 G1 X97.602 Y70.643 E33.92157 ; perimeter
 G1 X106.255 Y122.386 E35.47923 ; perimeter
 G1 X94.180 Y122.386 E35.83775 ; perimeter
 G1 X94.180 Y133.583 E36.17019 ; perimeter
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 X107.835 Y134.000 E36.58623 F7200.000 ; perimeter
 G1 X108.207 Y136.222 E36.65313 ; perimeter
 G1 X108.207 Y137.482 E36.69055 ; perimeter
 G1 X107.772 Y138.311 E36.71833 ; perimeter
 G1 X107.001 Y138.843 E36.74612 ; perimeter
 G1 X105.706 Y139.000 E36.78487 ; perimeter
 G1 X93.690 Y139.000 E37.14164 ; perimeter
 G1 X92.697 Y138.624 E37.17315 ; perimeter
 G1 X92.077 Y137.923 E37.20094 ; perimeter
 G1 X91.795 Y136.780 E37.23590 ; perimeter
 G1 X92.281 Y61.000 E39.48595 ; perimeter
 G1 X94.823 Y61.000 E39.56142 ; perimeter
 G1 X94.823 Y71.000 E39.85833 ; perimeter
 G1 X97.299 Y71.000 E39.93187 ; perimeter
 G1 X105.833 Y122.029 E41.46804 ; perimeter
 G1 X93.823 Y122.029 E41.82464 ; perimeter
 G1 X93.823 Y133.940 E42.17828 ; perimeter
 G1 X93.621 Y129.753 F12000.000 ; move to first infill point
 G1 X92.041 Y129.753 E42.25146 F7200.000 ; infill
 G1 X92.045 Y129.180 E42.27803 ; infill
 G1 X93.621 Y128.463 E42.35824 ; infill
 G1 X95.917 Y138.279 F12000.000 ; move to first infill point
 G1 X94.972 Y138.631 E42.40494 F7200.000 ; infill
 G1 F9600
 G1 X95.917 Y138.279 E42.16549 ; wipe and retract
 G1 E37.40494 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z2.400 F12000.000 ; lift Z
 G1 X105.068 Y121.661 F12000.000 ; move to first infill point
 G1 Z1.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X105.551 Y121.575 E5.02272 F7200.000 ; infill
 G1 X105.055 Y118.612 E5.16188 ; infill
 G1 X92.113 Y118.612 E5.76138 ; infill
 G1 X92.117 Y117.997 E5.78986 ; infill
 G1 X103.851 Y111.414 E6.41310 ; infill
 G1 X103.192 Y107.470 E6.59834 ; infill
 G1 X92.184 Y107.470 E7.10822 ; infill
 G1 X92.189 Y106.814 E7.13862 ; infill
 G1 X102.152 Y101.254 E7.66715 ; infill
 G1 X101.329 Y96.329 E7.89846 ; infill
 G1 X92.256 Y96.329 E8.31873 ; infill
 G1 X92.260 Y95.631 E8.35105 ; infill
 G1 X100.453 Y91.093 E8.78488 ; infill
 G1 X99.465 Y85.187 E9.06227 ; infill
 G1 X92.327 Y85.187 E9.39292 ; infill
 G1 X92.332 Y84.448 E9.42715 ; infill
 G1 X98.754 Y80.933 E9.76628 ; infill
 G1 X92.399 Y74.045 E10.20039 ; infill
 G1 X97.602 Y74.045 E10.44143 ; infill
 G1 X94.621 Y70.888 F12000.000 ; move to first infill point
 G1 X92.424 Y70.888 E10.54350 F7200.000 ; infill
 G1 X92.424 Y70.329 E10.56946 ; infill
 G1 X94.621 Y70.329 E10.67153 ; infill
 G1 X94.621 Y69.770 E10.69749 ; infill
 G1 X92.426 Y69.770 E10.79949 ; infill
 G1 X92.430 Y69.211 E10.82545 ; infill
 G1 X94.621 Y69.211 E10.92728 ; infill
 G1 X94.621 Y68.652 E10.95324 ; infill
 G1 X92.433 Y68.652 E11.05491 ; infill
 G1 X92.437 Y68.094 E11.08087 ; infill
 G1 X94.621 Y68.094 E11.18237 ; infill
 G1 X94.621 Y67.535 E11.20833 ; infill
 G1 X92.440 Y67.535 E11.30967 ; infill
 G1 X92.444 Y66.976 E11.33563 ; infill
 G1 X94.621 Y66.976 E11.43680 ; infill
 G1 X94.621 Y66.417 E11.46276 ; infill
 G1 X92.447 Y66.417 E11.56376 ; infill
 G1 X92.451 Y65.859 E11.58972 ; infill
 G1 X94.621 Y65.859 E11.69056 ; infill
 G1 X94.621 Y65.300 E11.71652 ; infill
 G1 X92.455 Y65.300 E11.81719 ; infill
 G1 X92.458 Y64.741 E11.84315 ; infill
 G1 X94.621 Y64.741 E11.94365 ; infill
 G1 X94.621 Y64.182 E11.96961 ; infill
 G1 X92.462 Y64.182 E12.06995 ; infill
 G1 X92.465 Y63.624 E12.09591 ; infill
 G1 X94.621 Y63.624 E12.19608 ; infill
 G1 X94.621 Y63.065 E12.22204 ; infill
 G1 X92.469 Y63.065 E12.32205 ; infill
 G1 X92.473 Y62.506 E12.34801 ; infill
 G1 X94.621 Y62.506 E12.44784 ; infill
 G1 X94.621 Y61.947 E12.47381 ; infill
 G1 X92.476 Y61.947 E12.57348 ; infill
 G1 X92.480 Y61.388 E12.59944 ; infill
 G1 X94.621 Y61.388 E12.69894 ; infill
 G1 X92.424 Y71.446 F12000.000 ; move to first infill point
 G1 X97.168 Y71.446 E12.91931 F7200.000 ; infill
 G1 X97.261 Y72.005 E12.94564 ; infill
 G1 X92.424 Y72.005 E13.17035 ; infill
 G1 X92.424 Y72.564 E13.19631 ; infill
 G1 X97.354 Y72.564 E13.42537 ; infill
 G1 X97.428 Y73.123 E13.45155 ; infill
 G1 X92.424 Y73.123 E13.68401 ; infill
 G1 F9600
 G1 X97.428 Y73.123 E12.49576 ; wipe and retract
 G1 F9600
 G1 X97.354 Y72.564 E12.36192 ; wipe and retract
 G1 F9600
 G1 X92.424 Y72.564 E11.19105 ; wipe and retract
 G1 F9600
 G1 X92.424 Y72.005 E11.05834 ; wipe and retract
 G1 F9600
 G1 X97.261 Y72.005 E9.90967 ; wipe and retract
 G1 F9600
 G1 X97.168 Y71.446 E9.77512 ; wipe and retract
 G1 F9600
 G1 X93.626 Y71.446 E8.93400 ; wipe and retract
 G1 E8.68401 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z2.400 F12000.000 ; lift Z
 G1 X107.497 Y134.388 F12000.000 ; move to first infill point
 G1 Z1.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X96.120 Y134.388 E5.56052 F7200.000 ; infill
 G1 X96.120 Y134.981 E5.58971 ; infill
 G1 X107.497 Y134.981 E6.15023 ; infill
 G1 X107.497 Y135.574 E6.17942 ; infill
 G1 X96.120 Y135.574 E6.73994 ; infill
 G1 X96.120 Y136.166 E6.76913 ; infill
 G1 X107.497 Y136.166 E7.32965 ; infill
 G1 X107.497 Y136.759 E7.35885 ; infill
 G1 X96.120 Y136.759 E7.91937 ; infill
 G1 X96.120 Y137.351 E7.94856 ; infill
 G1 X107.497 Y137.351 E8.50908 ; infill
 G1 X107.497 Y137.944 E8.53827 ; infill
 G1 X96.120 Y137.944 E9.09879 ; infill
 G1 X96.120 Y138.536 E9.12798 ; infill
 G1 X106.637 Y138.536 E9.64615 ; infill
 G1 F9600
 G1 X96.120 Y138.536 E7.14823 ; wipe and retract
 G1 F9600
 G1 X96.120 Y137.944 E7.00751 ; wipe and retract
 G1 F9600
 G1 X105.009 Y137.944 E4.89615 ; wipe and retract
 G1 E4.64615 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z2.400 F12000.000 ; lift Z
 G1 X95.608 Y132.215 F12000.000 ; move to first perimeter point
 G1 Z1.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X109.346 Y132.215 E5.40791 F7200.000 ; perimeter
 G1 X109.992 Y136.074 E5.52409 ; perimeter
 G1 X109.992 Y137.923 E5.57898 ; perimeter
 G1 X109.148 Y139.531 E5.63290 ; perimeter
 G1 X107.653 Y140.562 E5.68681 ; perimeter
 G1 X105.814 Y140.785 E5.74183 ; perimeter
 G1 X93.363 Y140.785 E6.11153 ; perimeter
 G1 X91.653 Y140.137 E6.16582 ; perimeter
 G1 X90.449 Y138.778 E6.21974 ; perimeter
 G1 X90.008 Y136.991 E6.27438 ; perimeter
 G1 X90.507 Y59.215 E8.58371 ; perimeter
 G1 X96.608 Y59.215 E8.76486 ; perimeter
 G1 X96.608 Y69.215 E9.06178 ; perimeter
 G1 X98.811 Y69.215 E9.12718 ; perimeter
 G1 X107.942 Y123.815 E10.77084 ; perimeter
 G1 X95.608 Y123.815 E11.13704 ; perimeter
 G1 X95.608 Y132.155 E11.38467 ; perimeter
 G1 X95.608 Y132.615 F12000.000 ; move inwards before travel
 G1 X95.251 Y132.572 F12000.000 ; move to first perimeter point
 G1 X109.044 Y132.572 E11.79420 F7200.000 ; perimeter
 G1 X109.635 Y136.104 E11.90053 ; perimeter
 G1 X109.635 Y137.835 E11.95192 ; perimeter
 G1 X108.873 Y139.287 E12.00061 ; perimeter
 G1 X107.523 Y140.218 E12.04931 ; perimeter
 G1 X105.792 Y140.428 E12.10107 ; perimeter
 G1 X93.428 Y140.428 E12.46818 ; perimeter
 G1 X91.862 Y139.834 E12.51792 ; perimeter
 G1 X90.774 Y138.607 E12.56661 ; perimeter
 G1 X90.366 Y136.949 E12.61731 ; perimeter
 G1 X90.862 Y59.572 E14.91479 ; perimeter
 G1 X96.251 Y59.572 E15.07480 ; perimeter
 G1 X96.251 Y69.572 E15.37172 ; perimeter
 G1 X98.509 Y69.572 E15.43875 ; perimeter
 G1 X107.520 Y123.458 E17.06091 ; perimeter
 G1 X95.251 Y123.458 E17.42519 ; perimeter
 G1 X95.251 Y132.512 E17.69402 ; perimeter
 G1 X94.894 Y132.929 F12000.000 ; move to first perimeter point
 G1 X108.742 Y132.929 E18.10518 F7200.000 ; perimeter
 G1 X109.278 Y136.133 E18.20165 ; perimeter
 G1 X109.278 Y137.747 E18.24955 ; perimeter
 G1 X108.597 Y139.043 E18.29302 ; perimeter
 G1 X107.393 Y139.874 E18.33648 ; perimeter
 G1 X105.771 Y140.071 E18.38499 ; perimeter
 G1 X93.493 Y140.071 E18.74952 ; perimeter
 G1 X92.071 Y139.532 E18.79470 ; perimeter
 G1 X91.100 Y138.436 E18.83816 ; perimeter
 G1 X90.723 Y136.906 E18.88493 ; perimeter
 G1 X91.216 Y59.929 E21.17055 ; perimeter
 G1 X95.894 Y59.929 E21.30943 ; perimeter
 G1 X95.894 Y69.929 E21.60634 ; perimeter
 G1 X98.206 Y69.929 E21.67500 ; perimeter
 G1 X107.098 Y123.100 E23.27566 ; perimeter
 G1 X94.894 Y123.100 E23.63803 ; perimeter
 G1 X94.894 Y132.869 E23.92806 ; perimeter
 G1 X94.537 Y133.286 F12000.000 ; move to first perimeter point
 G1 X108.440 Y133.286 E24.34085 F7200.000 ; perimeter
 G1 X108.921 Y136.163 E24.42746 ; perimeter
 G1 X108.921 Y137.659 E24.47187 ; perimeter
 G1 X108.322 Y138.799 E24.51010 ; perimeter
 G1 X107.262 Y139.530 E24.54834 ; perimeter
 G1 X105.749 Y139.714 E24.59360 ; perimeter
 G1 X93.559 Y139.714 E24.95554 ; perimeter
 G1 X92.280 Y139.229 E24.99617 ; perimeter
 G1 X91.426 Y138.265 E25.03440 ; perimeter
 G1 X91.080 Y136.864 E25.07724 ; perimeter
 G1 X91.571 Y60.286 E27.35100 ; perimeter
 G1 X95.537 Y60.286 E27.46874 ; perimeter
 G1 X95.537 Y70.286 E27.76566 ; perimeter
 G1 X97.904 Y70.286 E27.83594 ; perimeter
 G1 X106.677 Y122.743 E29.41510 ; perimeter
 G1 X94.537 Y122.743 E29.77555 ; perimeter
 G1 X94.537 Y133.226 E30.08678 ; perimeter
 G1 X94.180 Y133.643 F12000.000 ; move to first perimeter point
 G1 X108.137 Y133.643 E30.50120 F7200.000 ; perimeter
 G1 X108.564 Y136.193 E30.57795 ; perimeter
 G1 X108.564 Y137.571 E30.61886 ; perimeter
 G1 X108.047 Y138.555 E30.65188 ; perimeter
 G1 X107.132 Y139.187 E30.68489 ; perimeter
 G1 X105.728 Y139.357 E30.72689 ; perimeter
 G1 X93.624 Y139.357 E31.08625 ; perimeter
 G1 X92.488 Y138.926 E31.12232 ; perimeter
 G1 X91.751 Y138.094 E31.15533 ; perimeter
 G1 X91.438 Y136.822 E31.19423 ; perimeter
 G1 X91.926 Y60.643 E33.45613 ; perimeter
 G1 X95.180 Y60.643 E33.55274 ; perimeter
 G1 X95.180 Y70.643 E33.84965 ; perimeter
 G1 X97.602 Y70.643 E33.92157 ; perimeter
 G1 X106.255 Y122.386 E35.47923 ; perimeter
 G1 X94.180 Y122.386 E35.83775 ; perimeter
 G1 X94.180 Y133.583 E36.17019 ; perimeter
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 X107.835 Y134.000 E36.58623 F7200.000 ; perimeter
 G1 X108.207 Y136.222 E36.65313 ; perimeter
 G1 X108.207 Y137.482 E36.69055 ; perimeter
 G1 X107.772 Y138.311 E36.71833 ; perimeter
 G1 X107.001 Y138.843 E36.74612 ; perimeter
 G1 X105.706 Y139.000 E36.78487 ; perimeter
 G1 X93.690 Y139.000 E37.14164 ; perimeter
 G1 X92.697 Y138.624 E37.17315 ; perimeter
 G1 X92.077 Y137.923 E37.20094 ; perimeter
 G1 X91.795 Y136.780 E37.23590 ; perimeter
 G1 X92.281 Y61.000 E39.48595 ; perimeter
 G1 X94.823 Y61.000 E39.56142 ; perimeter
 G1 X94.823 Y71.000 E39.85833 ; perimeter
 G1 X97.299 Y71.000 E39.93187 ; perimeter
 G1 X105.833 Y122.029 E41.46804 ; perimeter
 G1 X93.823 Y122.029 E41.82464 ; perimeter
 G1 X93.823 Y133.940 E42.17828 ; perimeter
 G1 X92.530 Y138.046 F12000.000 ; move to first infill point
 G1 X92.530 Y79.475 E44.89135 F7200.000 ; infill
 G1 X93.153 Y71.693 E45.25301 ; infill
 G1 X100.129 Y121.828 E47.59772 ; infill
 G1 X103.671 Y111.170 E48.11795 ; infill
 G1 X103.671 Y121.828 E48.61162 ; infill
 G1 F9600
 G1 X103.671 Y111.170 E46.08046 ; wipe and retract
 G1 F9600
 G1 X100.724 Y120.036 E43.86162 ; wipe and retract
 G1 E43.61162 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z2.600 F12000.000 ; lift Z
 G1 X107.330 Y138.336 F12000.000 ; move to first infill point
 G1 Z1.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X107.330 Y134.221 E5.19883 F7200.000 ; infill
 G1 X106.748 Y134.221 E5.22692 ; infill
 G1 X106.748 Y138.669 E5.44188 ; infill
 G1 X106.167 Y138.703 E5.47001 ; infill
 G1 X106.167 Y134.221 E5.68661 ; infill
 G1 X105.586 Y134.221 E5.71470 ; infill
 G1 X105.586 Y138.703 E5.93129 ; infill
 G1 X105.005 Y138.703 E5.95938 ; infill
 G1 X105.005 Y134.221 E6.17597 ; infill
 G1 X104.424 Y134.221 E6.20406 ; infill
 G1 X104.424 Y138.703 E6.42065 ; infill
 G1 X103.842 Y138.703 E6.44874 ; infill
 G1 X103.842 Y134.221 E6.66534 ; infill
 G1 X103.261 Y134.221 E6.69342 ; infill
 G1 X103.261 Y138.703 E6.91002 ; infill
 G1 X102.680 Y138.703 E6.93811 ; infill
 G1 X102.680 Y134.221 E7.15470 ; infill
 G1 X102.099 Y134.221 E7.18279 ; infill
 G1 X102.099 Y138.703 E7.39938 ; infill
 G1 X101.517 Y138.703 E7.42747 ; infill
 G1 X101.517 Y134.221 E7.64406 ; infill
 G1 X100.936 Y134.221 E7.67215 ; infill
 G1 X100.936 Y138.703 E7.88875 ; infill
 G1 X100.355 Y138.703 E7.91683 ; infill
 G1 X100.355 Y134.221 E8.13343 ; infill
 G1 X99.774 Y134.221 E8.16152 ; infill
 G1 X99.774 Y138.703 E8.37811 ; infill
 G1 X99.193 Y138.703 E8.40620 ; infill
 G1 X99.193 Y134.221 E8.62279 ; infill
 G1 X98.611 Y134.221 E8.65088 ; infill
 G1 X98.611 Y138.703 E8.86747 ; infill
 G1 X98.030 Y138.703 E8.89556 ; infill
 G1 X98.030 Y134.221 E9.11215 ; infill
 G1 X97.449 Y134.221 E9.14024 ; infill
 G1 X97.449 Y138.703 E9.35684 ; infill
 G1 X96.868 Y138.703 E9.38492 ; infill
 G1 X96.868 Y134.221 E9.60152 ; infill
 G1 X96.287 Y134.221 E9.62961 ; infill
 G1 X96.287 Y138.703 E9.84620 ; infill
 G1 F9600
 G1 X96.287 Y134.221 E8.78177 ; wipe and retract
 G1 F9600
 G1 X96.868 Y134.221 E8.64374 ; wipe and retract
 G1 F9600
 G1 X96.868 Y138.703 E7.57931 ; wipe and retract
 G1 F9600
 G1 X97.449 Y138.703 E7.44127 ; wipe and retract
 G1 F9600
 G1 X97.449 Y134.221 E6.37684 ; wipe and retract
 G1 F9600
 G1 X98.030 Y134.221 E6.23881 ; wipe and retract
 G1 F9600
 G1 X98.030 Y138.703 E5.17438 ; wipe and retract
 G1 F9600
 G1 X98.359 Y138.703 E5.09620 ; wipe and retract
 G1 E4.84620 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z2.600 F12000.000 ; lift Z
 G1 X94.434 Y71.490 F12000.000 ; move to first infill point
 G1 Z1.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.434 Y61.221 E5.52113 F7200.000 ; infill
 G1 X93.824 Y61.221 E5.55211 ; infill
 G1 X93.824 Y71.490 E6.07324 ; infill
 G1 X93.214 Y71.490 E6.10421 ; infill
 G1 X93.214 Y61.221 E6.62534 ; infill
 G1 X92.603 Y68.036 F12000.000 ; move to first infill point
 G1 X92.603 Y71.490 E6.80063 F7200.000 ; infill
 G1 F9600
 G1 X92.603 Y68.036 E5.98033 ; wipe and retract
 G1 E1.80063 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z2.600 F12000.000 ; lift Z
 G1 X95.608 Y132.215 F12000.000 ; move to first perimeter point
 G1 Z1.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X109.346 Y132.215 E5.40791 F7200.000 ; perimeter
 G1 X109.992 Y136.074 E5.52409 ; perimeter
 G1 X109.992 Y137.923 E5.57898 ; perimeter
 G1 X109.148 Y139.531 E5.63290 ; perimeter
 G1 X107.653 Y140.562 E5.68681 ; perimeter
 G1 X105.814 Y140.785 E5.74183 ; perimeter
 G1 X93.363 Y140.785 E6.11153 ; perimeter
 G1 X91.653 Y140.137 E6.16582 ; perimeter
 G1 X90.449 Y138.778 E6.21974 ; perimeter
 G1 X90.008 Y136.991 E6.27438 ; perimeter
 G1 X90.507 Y59.215 E8.58371 ; perimeter
 G1 X96.608 Y59.215 E8.76486 ; perimeter
 G1 X96.608 Y69.215 E9.06178 ; perimeter
 G1 X98.811 Y69.215 E9.12718 ; perimeter
 G1 X107.942 Y123.815 E10.77084 ; perimeter
 G1 X95.608 Y123.815 E11.13704 ; perimeter
 G1 X95.608 Y132.155 E11.38467 ; perimeter
 G1 X95.608 Y132.615 F12000.000 ; move inwards before travel
 G1 X95.251 Y132.572 F12000.000 ; move to first perimeter point
 G1 X109.044 Y132.572 E11.79420 F7200.000 ; perimeter
 G1 X109.635 Y136.104 E11.90053 ; perimeter
 G1 X109.635 Y137.835 E11.95192 ; perimeter
 G1 X108.873 Y139.287 E12.00061 ; perimeter
 G1 X107.523 Y140.218 E12.04931 ; perimeter
 G1 X105.792 Y140.428 E12.10107 ; perimeter
 G1 X93.428 Y140.428 E12.46818 ; perimeter
 G1 X91.862 Y139.834 E12.51792 ; perimeter
 G1 X90.774 Y138.607 E12.56661 ; perimeter
 G1 X90.366 Y136.949 E12.61731 ; perimeter
 G1 X90.862 Y59.572 E14.91479 ; perimeter
 G1 X96.251 Y59.572 E15.07480 ; perimeter
 G1 X96.251 Y69.572 E15.37172 ; perimeter
 G1 X98.509 Y69.572 E15.43875 ; perimeter
 G1 X107.520 Y123.458 E17.06091 ; perimeter
 G1 X95.251 Y123.458 E17.42519 ; perimeter
 G1 X95.251 Y132.512 E17.69402 ; perimeter
 G1 X94.894 Y132.929 F12000.000 ; move to first perimeter point
 G1 X108.742 Y132.929 E18.10518 F7200.000 ; perimeter
 G1 X109.278 Y136.133 E18.20165 ; perimeter
 G1 X109.278 Y137.747 E18.24955 ; perimeter
 G1 X108.597 Y139.043 E18.29302 ; perimeter
 G1 X107.393 Y139.874 E18.33648 ; perimeter
 G1 X105.771 Y140.071 E18.38499 ; perimeter
 G1 X93.493 Y140.071 E18.74952 ; perimeter
 G1 X92.071 Y139.532 E18.79470 ; perimeter
 G1 X91.100 Y138.436 E18.83816 ; perimeter
 G1 X90.723 Y136.906 E18.88493 ; perimeter
 G1 X91.216 Y59.929 E21.17055 ; perimeter
 G1 X95.894 Y59.929 E21.30943 ; perimeter
 G1 X95.894 Y69.929 E21.60634 ; perimeter
 G1 X98.206 Y69.929 E21.67500 ; perimeter
 G1 X107.098 Y123.100 E23.27566 ; perimeter
 G1 X94.894 Y123.100 E23.63803 ; perimeter
 G1 X94.894 Y132.869 E23.92806 ; perimeter
 G1 X94.537 Y133.286 F12000.000 ; move to first perimeter point
 G1 X108.440 Y133.286 E24.34085 F7200.000 ; perimeter
 G1 X108.921 Y136.163 E24.42746 ; perimeter
 G1 X108.921 Y137.659 E24.47187 ; perimeter
 G1 X108.322 Y138.799 E24.51010 ; perimeter
 G1 X107.262 Y139.530 E24.54834 ; perimeter
 G1 X105.749 Y139.714 E24.59360 ; perimeter
 G1 X93.559 Y139.714 E24.95554 ; perimeter
 G1 X92.280 Y139.229 E24.99617 ; perimeter
 G1 X91.426 Y138.265 E25.03440 ; perimeter
 G1 X91.080 Y136.864 E25.07724 ; perimeter
 G1 X91.571 Y60.286 E27.35100 ; perimeter
 G1 X95.537 Y60.286 E27.46874 ; perimeter
 G1 X95.537 Y70.286 E27.76566 ; perimeter
 G1 X97.904 Y70.286 E27.83594 ; perimeter
 G1 X106.677 Y122.743 E29.41510 ; perimeter
 G1 X94.537 Y122.743 E29.77555 ; perimeter
 G1 X94.537 Y133.226 E30.08678 ; perimeter
 G1 X94.180 Y133.643 F12000.000 ; move to first perimeter point
 G1 X108.137 Y133.643 E30.50120 F7200.000 ; perimeter
 G1 X108.564 Y136.193 E30.57795 ; perimeter
 G1 X108.564 Y137.571 E30.61886 ; perimeter
 G1 X108.047 Y138.555 E30.65188 ; perimeter
 G1 X107.132 Y139.187 E30.68489 ; perimeter
 G1 X105.728 Y139.357 E30.72689 ; perimeter
 G1 X93.624 Y139.357 E31.08625 ; perimeter
 G1 X92.488 Y138.926 E31.12232 ; perimeter
 G1 X91.751 Y138.094 E31.15533 ; perimeter
 G1 X91.438 Y136.822 E31.19423 ; perimeter
 G1 X91.926 Y60.643 E33.45613 ; perimeter
 G1 X95.180 Y60.643 E33.55274 ; perimeter
 G1 X95.180 Y70.643 E33.84965 ; perimeter
 G1 X97.602 Y70.643 E33.92157 ; perimeter
 G1 X106.255 Y122.386 E35.47923 ; perimeter
 G1 X94.180 Y122.386 E35.83775 ; perimeter
 G1 X94.180 Y133.583 E36.17019 ; perimeter
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 X107.835 Y134.000 E36.58623 F7200.000 ; perimeter
 G1 X108.207 Y136.222 E36.65313 ; perimeter
 G1 X108.207 Y137.482 E36.69055 ; perimeter
 G1 X107.772 Y138.311 E36.71833 ; perimeter
 G1 X107.001 Y138.843 E36.74612 ; perimeter
 G1 X105.706 Y139.000 E36.78487 ; perimeter
 G1 X93.690 Y139.000 E37.14164 ; perimeter
 G1 X92.697 Y138.624 E37.17315 ; perimeter
 G1 X92.077 Y137.923 E37.20094 ; perimeter
 G1 X91.795 Y136.780 E37.23590 ; perimeter
 G1 X92.281 Y61.000 E39.48595 ; perimeter
 G1 X94.823 Y61.000 E39.56142 ; perimeter
 G1 X94.823 Y71.000 E39.85833 ; perimeter
 G1 X97.299 Y71.000 E39.93187 ; perimeter
 G1 X105.833 Y122.029 E41.46804 ; perimeter
 G1 X93.823 Y122.029 E41.82464 ; perimeter
 G1 X93.823 Y133.940 E42.17828 ; perimeter
 G1 X93.621 Y129.753 F12000.000 ; move to first infill point
 G1 X92.041 Y129.753 E42.25146 F7200.000 ; infill
 G1 X92.045 Y129.180 E42.27803 ; infill
 G1 X93.621 Y128.463 E42.35824 ; infill
 G1 X95.917 Y138.279 F12000.000 ; move to first infill point
 G1 X94.972 Y138.631 E42.40495 F7200.000 ; infill
 G1 F9600
 G1 X95.917 Y138.279 E42.16548 ; wipe and retract
 G1 E37.40495 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z2.800 F12000.000 ; lift Z
 G1 X105.068 Y121.661 F12000.000 ; move to first infill point
 G1 Z1.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X105.551 Y121.575 E5.02272 F7200.000 ; infill
 G1 X105.055 Y118.612 E5.16188 ; infill
 G1 X92.113 Y118.612 E5.76138 ; infill
 G1 X92.117 Y117.997 E5.78986 ; infill
 G1 X103.851 Y111.414 E6.41310 ; infill
 G1 X103.192 Y107.470 E6.59834 ; infill
 G1 X92.184 Y107.470 E7.10822 ; infill
 G1 X92.189 Y106.814 E7.13862 ; infill
 G1 X102.152 Y101.254 E7.66715 ; infill
 G1 X101.329 Y96.329 E7.89846 ; infill
 G1 X92.256 Y96.329 E8.31873 ; infill
 G1 X92.260 Y95.631 E8.35105 ; infill
 G1 X100.453 Y91.093 E8.78488 ; infill
 G1 X99.465 Y85.187 E9.06227 ; infill
 G1 X92.327 Y85.187 E9.39292 ; infill
 G1 X92.332 Y84.448 E9.42715 ; infill
 G1 X98.754 Y80.933 E9.76628 ; infill
 G1 X97.602 Y74.045 E10.08975 ; infill
 G1 X92.399 Y74.045 E10.33079 ; infill
 G1 X92.404 Y73.265 E10.36694 ; infill
 G1 X96.022 Y71.368 E10.55619 ; infill
 G1 X92.448 Y69.523 F12000.000 ; move to first infill point
 G1 X94.601 Y69.523 E10.66024 F7200.000 ; infill
 G1 X94.601 Y68.942 E10.68831 ; infill
 G1 X92.448 Y68.942 E10.79236 ; infill
 G1 X92.448 Y68.361 E10.82043 ; infill
 G1 X94.601 Y68.361 E10.92448 ; infill
 G1 X94.601 Y67.780 E10.95255 ; infill
 G1 X92.448 Y67.780 E11.05660 ; infill
 G1 X92.448 Y67.199 E11.08467 ; infill
 G1 X94.601 Y67.199 E11.18872 ; infill
 G1 X94.601 Y66.618 E11.21679 ; infill
 G1 X92.448 Y66.618 E11.32084 ; infill
 G1 X92.450 Y66.037 E11.34891 ; infill
 G1 X94.601 Y66.037 E11.45284 ; infill
 G1 X94.601 Y65.456 E11.48091 ; infill
 G1 X92.454 Y65.456 E11.58467 ; infill
 G1 X92.457 Y64.875 E11.61274 ; infill
 G1 X94.601 Y64.875 E11.71632 ; infill
 G1 X94.601 Y64.294 E11.74439 ; infill
 G1 X92.461 Y64.294 E11.84779 ; infill
 G1 X92.465 Y63.713 E11.87586 ; infill
 G1 X94.601 Y63.713 E11.97908 ; infill
 G1 X94.601 Y63.132 E12.00714 ; infill
 G1 X92.469 Y63.132 E12.11018 ; infill
 G1 X92.472 Y62.551 E12.13825 ; infill
 G1 X94.601 Y62.551 E12.24111 ; infill
 G1 X94.601 Y61.969 E12.26918 ; infill
 G1 X92.476 Y61.969 E12.37186 ; infill
 G1 X92.480 Y61.388 E12.39993 ; infill
 G1 X94.601 Y61.388 E12.50243 ; infill
 G1 F9600
 G1 X92.480 Y61.388 E11.99854 ; wipe and retract
 G1 F9600
 G1 X92.476 Y61.969 E11.86055 ; wipe and retract
 G1 F9600
 G1 X94.601 Y61.969 E11.35577 ; wipe and retract
 G1 F9600
 G1 X94.601 Y62.551 E11.21778 ; wipe and retract
 G1 F9600
 G1 X92.472 Y62.551 E10.71213 ; wipe and retract
 G1 F9600
 G1 X92.469 Y63.132 E10.57414 ; wipe and retract
 G1 F9600
 G1 X94.601 Y63.132 E10.06759 ; wipe and retract
 G1 F9600
 G1 X94.601 Y63.713 E9.92960 ; wipe and retract
 G1 F9600
 G1 X92.465 Y63.713 E9.42218 ; wipe and retract
 G1 F9600
 G1 X92.461 Y64.294 E9.28419 ; wipe and retract
 G1 F9600
 G1 X94.601 Y64.294 E8.77587 ; wipe and retract
 G1 F9600
 G1 X94.601 Y64.875 E8.63789 ; wipe and retract
 G1 F9600
 G1 X92.457 Y64.875 E8.12869 ; wipe and retract
 G1 F9600
 G1 X92.454 Y65.456 E7.99070 ; wipe and retract
 G1 F9600
 G1 X93.457 Y65.456 E7.75243 ; wipe and retract
 G1 E7.50243 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z2.800 F12000.000 ; lift Z
 G1 X107.537 Y134.288 F12000.000 ; move to first infill point
 G1 Z1.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X96.080 Y134.288 E5.34515 F7200.000 ; infill
 G1 X96.080 Y134.651 E5.35606 ; infill
 G1 X107.537 Y134.651 E5.70121 ; infill
 G1 X107.537 Y135.013 E5.71212 ; infill
 G1 X96.080 Y135.013 E6.05727 ; infill
 G1 X96.080 Y135.375 E6.06818 ; infill
 G1 X107.537 Y135.375 E6.41333 ; infill
 G1 X107.537 Y135.738 E6.42424 ; infill
 G1 X96.080 Y135.738 E6.76939 ; infill
 G1 X96.080 Y136.100 E6.78030 ; infill
 G1 X107.537 Y136.100 E7.12545 ; infill
 G1 X107.537 Y136.462 E7.13636 ; infill
 G1 X96.080 Y136.462 E7.48151 ; infill
 G1 X96.080 Y136.825 E7.49242 ; infill
 G1 X107.537 Y136.825 E7.83757 ; infill
 G1 X107.537 Y137.187 E7.84848 ; infill
 G1 X96.080 Y137.187 E8.19363 ; infill
 G1 X96.080 Y137.549 E8.20454 ; infill
 G1 X107.537 Y137.549 E8.54968 ; infill
 G1 X107.537 Y137.911 E8.56060 ; infill
 G1 X96.080 Y137.911 E8.90574 ; infill
 G1 X96.080 Y138.274 E8.91666 ; infill
 G1 X107.460 Y138.274 E9.25950 ; infill
 G1 X106.583 Y138.636 F12000.000 ; move to first infill point
 G1 X96.080 Y138.636 E9.57592 F7200.000 ; infill
 G1 F9600
 G1 X106.583 Y138.636 E7.08130 ; wipe and retract
 G1 E4.57592 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z2.800 F12000.000 ; lift Z
 M106 S130.05 ; enable fan
 G1 X95.608 Y132.215 F12000.000 ; move to first perimeter point
 G1 Z2.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X109.346 Y132.215 E5.40791 F7200.000 ; perimeter
 G1 X109.992 Y136.074 E5.52409 ; perimeter
 G1 X109.992 Y137.923 E5.57898 ; perimeter
 G1 X109.148 Y139.531 E5.63290 ; perimeter
 G1 X107.653 Y140.562 E5.68681 ; perimeter
 G1 X105.814 Y140.785 E5.74183 ; perimeter
 G1 X93.363 Y140.785 E6.11153 ; perimeter
 G1 X91.653 Y140.137 E6.16582 ; perimeter
 G1 X90.449 Y138.778 E6.21974 ; perimeter
 G1 X90.008 Y136.991 E6.27438 ; perimeter
 G1 X90.507 Y59.215 E8.58371 ; perimeter
 G1 X96.608 Y59.215 E8.76486 ; perimeter
 G1 X96.608 Y69.215 E9.06178 ; perimeter
 G1 X98.811 Y69.215 E9.12718 ; perimeter
 G1 X107.942 Y123.815 E10.77084 ; perimeter
 G1 X95.608 Y123.815 E11.13704 ; perimeter
 G1 X95.608 Y132.155 E11.38467 ; perimeter
 G1 X95.608 Y132.615 F12000.000 ; move inwards before travel
 G1 X95.251 Y132.572 F12000.000 ; move to first perimeter point
 G1 X98.451 Y132.572 E11.47968 F7200.000 ; perimeter
 G1 X98.451 Y136.372 E11.59251 ; perimeter
 G1 X105.165 Y136.372 E11.79186 ; perimeter
 G1 X105.165 Y132.572 E11.90469 ; perimeter
 G1 X109.044 Y132.572 E12.01986 ; perimeter
 G1 X109.635 Y136.104 E12.12618 ; perimeter
 G1 X109.635 Y137.835 E12.17758 ; perimeter
 G1 X108.873 Y139.287 E12.22627 ; perimeter
 G1 X107.523 Y140.218 E12.27496 ; perimeter
 G1 X105.792 Y140.428 E12.32672 ; perimeter
 G1 X93.428 Y140.428 E12.69384 ; perimeter
 G1 X91.862 Y139.834 E12.74357 ; perimeter
 G1 X90.774 Y138.607 E12.79226 ; perimeter
 G1 X90.366 Y136.949 E12.84297 ; perimeter
 G1 X90.862 Y59.572 E15.14044 ; perimeter
 G1 X96.251 Y59.572 E15.30046 ; perimeter
 G1 X96.251 Y69.572 E15.59737 ; perimeter
 G1 X98.509 Y69.572 E15.66441 ; perimeter
 G1 X107.520 Y123.458 E17.28656 ; perimeter
 G1 X95.251 Y123.458 E17.65085 ; perimeter
 G1 X95.251 Y132.512 E17.91968 ; perimeter
 G1 X94.894 Y132.929 F12000.000 ; move to first perimeter point
 G1 X98.094 Y132.929 E18.01469 F7200.000 ; perimeter
 G1 X98.094 Y136.729 E18.12751 ; perimeter
 G1 X105.522 Y136.729 E18.34807 ; perimeter
 G1 X105.522 Y132.929 E18.46090 ; perimeter
 G1 X108.742 Y132.929 E18.55649 ; perimeter
 G1 X109.278 Y136.133 E18.65296 ; perimeter
 G1 X109.278 Y137.747 E18.70086 ; perimeter
 G1 X108.597 Y139.043 E18.74432 ; perimeter
 G1 X107.393 Y139.874 E18.78779 ; perimeter
 G1 X105.771 Y140.071 E18.83630 ; perimeter
 G1 X93.493 Y140.071 E19.20083 ; perimeter
 G1 X92.071 Y139.532 E19.24601 ; perimeter
 G1 X91.100 Y138.436 E19.28947 ; perimeter
 G1 X90.723 Y136.906 E19.33624 ; perimeter
 G1 X91.216 Y59.929 E21.62186 ; perimeter
 G1 X95.894 Y59.929 E21.76074 ; perimeter
 G1 X95.894 Y69.929 E22.05765 ; perimeter
 G1 X98.206 Y69.929 E22.12631 ; perimeter
 G1 X107.098 Y123.100 E23.72697 ; perimeter
 G1 X94.894 Y123.100 E24.08933 ; perimeter
 G1 X94.894 Y132.869 E24.37937 ; perimeter
 G1 X94.537 Y133.286 F12000.000 ; move to first perimeter point
 G1 X97.737 Y133.286 E24.47438 F7200.000 ; perimeter
 G1 X97.737 Y137.086 E24.58721 ; perimeter
 G1 X105.879 Y137.086 E24.82897 ; perimeter
 G1 X105.879 Y133.286 E24.94179 ; perimeter
 G1 X108.440 Y133.286 E25.01781 ; perimeter
 G1 X108.921 Y136.163 E25.10442 ; perimeter
 G1 X108.921 Y137.659 E25.14883 ; perimeter
 G1 X108.322 Y138.799 E25.18707 ; perimeter
 G1 X107.262 Y139.530 E25.22530 ; perimeter
 G1 X105.749 Y139.714 E25.27056 ; perimeter
 G1 X93.559 Y139.714 E25.63250 ; perimeter
 G1 X92.280 Y139.229 E25.67313 ; perimeter
 G1 X91.426 Y138.265 E25.71136 ; perimeter
 G1 X91.080 Y136.864 E25.75420 ; perimeter
 G1 X91.571 Y60.286 E28.02796 ; perimeter
 G1 X95.537 Y60.286 E28.14571 ; perimeter
 G1 X95.537 Y70.286 E28.44262 ; perimeter
 G1 X97.904 Y70.286 E28.51290 ; perimeter
 G1 X106.677 Y122.743 E30.09206 ; perimeter
 G1 X94.537 Y122.743 E30.45251 ; perimeter
 G1 X94.537 Y133.226 E30.76374 ; perimeter
 G1 X94.180 Y133.643 F12000.000 ; move to first perimeter point
 G1 X97.380 Y133.643 E30.85876 F7200.000 ; perimeter
 G1 X97.380 Y137.443 E30.97158 ; perimeter
 G1 X106.236 Y137.443 E31.23455 ; perimeter
 G1 X106.236 Y133.643 E31.34738 ; perimeter
 G1 X108.137 Y133.643 E31.40381 ; perimeter
 G1 X108.564 Y136.193 E31.48056 ; perimeter
 G1 X108.564 Y137.571 E31.52148 ; perimeter
 G1 X108.047 Y138.555 E31.55449 ; perimeter
 G1 X107.132 Y139.187 E31.58750 ; perimeter
 G1 X105.728 Y139.357 E31.62950 ; perimeter
 G1 X93.624 Y139.357 E31.98886 ; perimeter
 G1 X92.488 Y138.926 E32.02493 ; perimeter
 G1 X91.751 Y138.094 E32.05794 ; perimeter
 G1 X91.438 Y136.822 E32.09684 ; perimeter
 G1 X91.926 Y60.643 E34.35875 ; perimeter
 G1 X95.180 Y60.643 E34.45536 ; perimeter
 G1 X95.180 Y70.643 E34.75227 ; perimeter
 G1 X97.602 Y70.643 E34.82418 ; perimeter
 G1 X106.255 Y122.386 E36.38184 ; perimeter
 G1 X94.180 Y122.386 E36.74036 ; perimeter
 G1 X94.180 Y133.583 E37.07281 ; perimeter
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 X97.023 Y134.000 E37.16782 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E37.28065 ; perimeter
 G1 X106.593 Y137.800 E37.56481 ; perimeter
 G1 X106.593 Y134.000 E37.67764 ; perimeter
 G1 X107.835 Y134.000 E37.71450 ; perimeter
 G1 X108.207 Y136.222 E37.78140 ; perimeter
 G1 X108.207 Y137.482 E37.81882 ; perimeter
 G1 X107.772 Y138.311 E37.84660 ; perimeter
 G1 X107.001 Y138.843 E37.87439 ; perimeter
 G1 X105.706 Y139.000 E37.91313 ; perimeter
 G1 X93.690 Y139.000 E38.26991 ; perimeter
 G1 X92.697 Y138.624 E38.30142 ; perimeter
 G1 X92.077 Y137.923 E38.32921 ; perimeter
 G1 X91.795 Y136.780 E38.36417 ; perimeter
 G1 X92.281 Y61.000 E40.61422 ; perimeter
 G1 X94.823 Y61.000 E40.68969 ; perimeter
 G1 X94.823 Y71.000 E40.98660 ; perimeter
 G1 X97.299 Y71.000 E41.06014 ; perimeter
 G1 X105.833 Y122.029 E42.59630 ; perimeter
 G1 X93.823 Y122.029 E42.95291 ; perimeter
 G1 X93.823 Y133.940 E43.30655 ; perimeter
 G1 X98.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 X104.808 Y133.015 E43.48470 F7200.000 ; perimeter
 G1 X104.808 Y136.015 E43.57377 ; perimeter
 G1 X98.808 Y136.015 E43.75192 ; perimeter
 G1 X98.808 Y133.075 E43.83921 ; perimeter
 G1 X98.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X104.987 Y132.615 E44.23940 F1800.000 ; infill
 G1 X106.962 Y135.288 F12000.000 ; move to first infill point
 G1 X107.838 Y136.526 E44.30963 F7200.000 ; infill
 G1 X103.671 Y138.001 F12000.000 ; move to first infill point
 G1 X103.671 Y138.799 E44.34656 F7200.000 ; infill
 G1 X98.901 Y138.799 E44.56753 ; infill
 G1 X98.452 Y138.001 E44.60991 ; infill
 G1 X96.654 Y136.482 F12000.000 ; move to first infill point
 G1 X94.766 Y134.201 E44.74706 F7200.000 ; infill
 G1 X92.530 Y132.581 F12000.000 ; move to first infill point
 G1 X92.530 Y138.046 E45.00021 F7200.000 ; infill
 G1 X93.434 Y132.708 F12000.000 ; move to first infill point
 G1 X93.434 Y122.031 E45.54190 F7200.000 ; infill
 G1 X92.824 Y122.031 E45.57285 ; infill
 G1 X92.824 Y132.477 E46.10283 ; infill
 G1 X92.214 Y132.225 E46.13632 ; infill
 G1 X92.214 Y128.749 E46.31265 ; infill
 G1 X92.227 Y118.439 F12000.000 ; move to first infill point
 M106 S255 ; enable fan
 G1 X92.227 Y121.829 E46.49445 F1680.000 ; infill
 G1 X92.682 Y121.829 E46.51887 ; infill
 G1 X92.682 Y71.691 E49.20794 ; infill
 G1 X93.137 Y71.691 E49.23236 ; infill
 G1 X93.137 Y121.829 E51.92143 ; infill
 G1 X93.593 Y121.829 E51.94584 ; infill
 G1 X93.593 Y71.691 E54.63491 ; infill
 G1 X94.048 Y71.691 E54.65933 ; infill
 G1 X94.048 Y121.829 E57.34840 ; infill
 G1 X94.503 Y121.829 E57.37282 ; infill
 G1 X94.503 Y71.691 E60.06188 ; infill
 G1 X94.958 Y71.691 E60.08630 ; infill
 G1 X94.958 Y121.829 E62.77537 ; infill
 G1 X95.414 Y121.829 E62.79979 ; infill
 G1 X95.414 Y71.691 E65.48886 ; infill
 G1 X95.869 Y71.691 E65.51327 ; infill
 G1 X95.869 Y121.829 E68.20234 ; infill
 G1 X96.324 Y121.829 E68.22676 ; infill
 G1 X96.324 Y71.691 E70.91583 ; infill
 G1 X96.780 Y71.691 E70.94025 ; infill
 G1 X96.780 Y121.829 E73.62931 ; infill
 G1 X97.235 Y121.829 E73.65373 ; infill
 G1 X97.235 Y72.388 E76.30542 ; infill
 M106 S130.05 ; enable fan
 G1 X97.690 Y75.110 F12000.000 ; move to first infill point
 M106 S255 ; enable fan
 G1 X97.690 Y121.829 E78.81110 F1680.000 ; infill
 G1 X98.145 Y121.829 E78.83552 ; infill
 G1 X98.145 Y77.833 E81.19518 ; infill
 M106 S130.05 ; enable fan
 G1 X98.601 Y80.555 F12000.000 ; move to first infill point
 M106 S255 ; enable fan
 G1 X98.601 Y121.829 E83.40883 F1680.000 ; infill
 G1 X99.056 Y121.829 E83.43325 ; infill
 G1 X99.056 Y83.278 E85.50088 ; infill
 M106 S130.05 ; enable fan
 G1 X99.511 Y86.000 F12000.000 ; move to first infill point
 M106 S255 ; enable fan
 G1 X99.511 Y121.829 E87.42249 F1680.000 ; infill
 G1 X99.966 Y121.829 E87.44691 ; infill
 G1 X99.966 Y88.723 E89.22250 ; infill
 M106 S130.05 ; enable fan
 G1 X100.422 Y91.445 F12000.000 ; move to first infill point
 M106 S255 ; enable fan
 G1 X100.422 Y121.829 E90.85209 F1680.000 ; infill
 G1 X100.877 Y121.829 E90.87650 ; infill
 G1 X100.877 Y94.168 E92.36007 ; infill
 M106 S130.05 ; enable fan
 G1 X101.332 Y96.890 F12000.000 ; move to first infill point
 M106 S255 ; enable fan
 G1 X101.332 Y121.829 E93.69762 F1680.000 ; infill
 G1 X101.788 Y121.829 E93.72204 ; infill
 G1 X101.788 Y99.613 E94.91357 ; infill
 M106 S130.05 ; enable fan
 G1 X102.243 Y102.335 F12000.000 ; move to first infill point
 M106 S255 ; enable fan
 G1 X102.243 Y121.829 E95.95909 F1680.000 ; infill
 G1 X102.698 Y121.829 E95.98350 ; infill
 G1 X102.698 Y105.058 E96.88300 ; infill
 M106 S130.05 ; enable fan
 G1 X103.153 Y107.780 F12000.000 ; move to first infill point
 M106 S255 ; enable fan
 G1 X103.153 Y121.829 E97.63649 F1680.000 ; infill
 G1 X103.609 Y121.829 E97.66091 ; infill
 G1 X103.609 Y110.503 E98.26838 ; infill
 M106 S130.05 ; enable fan
 G1 X104.064 Y113.225 F12000.000 ; move to first infill point
 M106 S255 ; enable fan
 G1 X104.064 Y121.829 E98.72983 F1680.000 ; infill
 G1 X104.519 Y121.829 E98.75425 ; infill
 G1 X104.519 Y115.948 E99.06969 ; infill
 M106 S130.05 ; enable fan
 G1 X104.975 Y118.670 F12000.000 ; move to first infill point
 M106 S255 ; enable fan
 G1 X104.975 Y121.829 E99.23911 F1680.000 ; infill
 G1 X105.430 Y121.393 E99.27293 ; infill
 G1 X105.430 Y121.809 E99.29526 ; infill
 M106 S130.05 ; enable fan
 G1 X94.434 Y71.490 F12000.000 ; move to first infill point
 G1 X94.434 Y61.221 E99.81639 F7200.000 ; infill
 G1 X93.824 Y61.221 E99.84737 ; infill
 G1 X93.824 Y71.490 E100.36850 ; infill
 G1 X93.213 Y71.490 E100.39948 ; infill
 G1 X93.213 Y61.221 E100.92061 ; infill
 G1 X92.603 Y68.037 F12000.000 ; move to first infill point
 G1 X92.603 Y71.490 E101.09583 F7200.000 ; infill
 G1 F9600
 G1 X92.603 Y68.037 E100.27585 ; wipe and retract
 G1 E96.09583 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z3.000 F12000.000 ; lift Z
 M106 S224.4 ; enable fan
 G1 X95.608 Y132.215 F12000.000 ; move to first perimeter point
 G1 Z2.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X109.346 Y132.215 E5.40791 F7200.000 ; perimeter
 G1 X109.992 Y136.074 E5.52409 ; perimeter
 G1 X109.992 Y137.923 E5.57898 ; perimeter
 G1 X109.148 Y139.531 E5.63290 ; perimeter
 G1 X107.653 Y140.562 E5.68681 ; perimeter
 G1 X105.814 Y140.785 E5.74183 ; perimeter
 G1 X93.363 Y140.785 E6.11153 ; perimeter
 G1 X91.653 Y140.137 E6.16582 ; perimeter
 G1 X90.449 Y138.778 E6.21974 ; perimeter
 G1 X90.008 Y136.991 E6.27438 ; perimeter
 G1 X90.507 Y59.215 E8.58371 ; perimeter
 G1 X96.608 Y59.215 E8.76486 ; perimeter
 G1 X96.608 Y69.215 E9.06178 ; perimeter
 G1 X98.811 Y69.215 E9.12718 ; perimeter
 G1 X107.942 Y123.815 E10.77084 ; perimeter
 G1 X95.608 Y123.815 E11.13704 ; perimeter
 G1 X95.608 Y132.155 E11.38467 ; perimeter
 G1 X95.608 Y132.615 F12000.000 ; move inwards before travel
 G1 X95.251 Y132.572 F12000.000 ; move to first perimeter point
 G1 X98.451 Y132.572 E11.47968 F7200.000 ; perimeter
 G1 X98.451 Y136.372 E11.59251 ; perimeter
 G1 X105.165 Y136.372 E11.79186 ; perimeter
 G1 X105.165 Y132.572 E11.90469 ; perimeter
 G1 X109.044 Y132.572 E12.01986 ; perimeter
 G1 X109.635 Y136.104 E12.12618 ; perimeter
 G1 X109.635 Y137.835 E12.17758 ; perimeter
 G1 X108.873 Y139.287 E12.22627 ; perimeter
 G1 X107.523 Y140.218 E12.27496 ; perimeter
 G1 X105.792 Y140.428 E12.32672 ; perimeter
 G1 X93.428 Y140.428 E12.69384 ; perimeter
 G1 X91.862 Y139.834 E12.74357 ; perimeter
 G1 X90.774 Y138.607 E12.79226 ; perimeter
 G1 X90.366 Y136.949 E12.84297 ; perimeter
 G1 X90.862 Y59.572 E15.14044 ; perimeter
 G1 X96.251 Y59.572 E15.30046 ; perimeter
 G1 X96.251 Y69.572 E15.59737 ; perimeter
 G1 X98.509 Y69.572 E15.66441 ; perimeter
 G1 X107.520 Y123.458 E17.28656 ; perimeter
 G1 X95.251 Y123.458 E17.65085 ; perimeter
 G1 X95.251 Y132.512 E17.91968 ; perimeter
 G1 X94.894 Y132.929 F12000.000 ; move to first perimeter point
 G1 X98.094 Y132.929 E18.01469 F7200.000 ; perimeter
 G1 X98.094 Y136.729 E18.12751 ; perimeter
 G1 X105.522 Y136.729 E18.34807 ; perimeter
 G1 X105.522 Y132.929 E18.46090 ; perimeter
 G1 X108.742 Y132.929 E18.55649 ; perimeter
 G1 X109.278 Y136.133 E18.65296 ; perimeter
 G1 X109.278 Y137.747 E18.70086 ; perimeter
 G1 X108.597 Y139.043 E18.74432 ; perimeter
 G1 X107.393 Y139.874 E18.78779 ; perimeter
 G1 X105.771 Y140.071 E18.83630 ; perimeter
 G1 X93.493 Y140.071 E19.20083 ; perimeter
 G1 X92.071 Y139.532 E19.24601 ; perimeter
 G1 X91.100 Y138.436 E19.28947 ; perimeter
 G1 X90.723 Y136.906 E19.33624 ; perimeter
 G1 X91.216 Y59.929 E21.62186 ; perimeter
 G1 X95.894 Y59.929 E21.76074 ; perimeter
 G1 X95.894 Y69.929 E22.05765 ; perimeter
 G1 X98.206 Y69.929 E22.12631 ; perimeter
 G1 X107.098 Y123.100 E23.72697 ; perimeter
 G1 X94.894 Y123.100 E24.08933 ; perimeter
 G1 X94.894 Y132.869 E24.37937 ; perimeter
 G1 X94.537 Y133.286 F12000.000 ; move to first perimeter point
 G1 X97.737 Y133.286 E24.47438 F7200.000 ; perimeter
 G1 X97.737 Y137.086 E24.58721 ; perimeter
 G1 X105.879 Y137.086 E24.82897 ; perimeter
 G1 X105.879 Y133.286 E24.94179 ; perimeter
 G1 X108.440 Y133.286 E25.01781 ; perimeter
 G1 X108.921 Y136.163 E25.10442 ; perimeter
 G1 X108.921 Y137.659 E25.14883 ; perimeter
 G1 X108.322 Y138.799 E25.18707 ; perimeter
 G1 X107.262 Y139.530 E25.22530 ; perimeter
 G1 X105.749 Y139.714 E25.27056 ; perimeter
 G1 X93.559 Y139.714 E25.63250 ; perimeter
 G1 X92.280 Y139.229 E25.67313 ; perimeter
 G1 X91.426 Y138.265 E25.71136 ; perimeter
 G1 X91.080 Y136.864 E25.75420 ; perimeter
 G1 X91.571 Y60.286 E28.02796 ; perimeter
 G1 X95.537 Y60.286 E28.14571 ; perimeter
 G1 X95.537 Y70.286 E28.44262 ; perimeter
 G1 X97.904 Y70.286 E28.51290 ; perimeter
 G1 X106.677 Y122.743 E30.09206 ; perimeter
 G1 X94.537 Y122.743 E30.45251 ; perimeter
 G1 X94.537 Y133.226 E30.76374 ; perimeter
 G1 X94.180 Y133.643 F12000.000 ; move to first perimeter point
 G1 X97.380 Y133.643 E30.85876 F7200.000 ; perimeter
 G1 X97.380 Y137.443 E30.97158 ; perimeter
 G1 X106.236 Y137.443 E31.23455 ; perimeter
 G1 X106.236 Y133.643 E31.34738 ; perimeter
 G1 X108.137 Y133.643 E31.40381 ; perimeter
 G1 X108.564 Y136.193 E31.48056 ; perimeter
 G1 X108.564 Y137.571 E31.52148 ; perimeter
 G1 X108.047 Y138.555 E31.55449 ; perimeter
 G1 X107.132 Y139.187 E31.58750 ; perimeter
 G1 X105.728 Y139.357 E31.62950 ; perimeter
 G1 X93.624 Y139.357 E31.98886 ; perimeter
 G1 X92.488 Y138.926 E32.02493 ; perimeter
 G1 X91.751 Y138.094 E32.05794 ; perimeter
 G1 X91.438 Y136.822 E32.09684 ; perimeter
 G1 X91.926 Y60.643 E34.35875 ; perimeter
 G1 X95.180 Y60.643 E34.45536 ; perimeter
 G1 X95.180 Y70.643 E34.75227 ; perimeter
 G1 X97.602 Y70.643 E34.82418 ; perimeter
 G1 X106.255 Y122.386 E36.38184 ; perimeter
 G1 X94.180 Y122.386 E36.74036 ; perimeter
 G1 X94.180 Y133.583 E37.07281 ; perimeter
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 X97.023 Y134.000 E37.16782 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E37.28065 ; perimeter
 G1 X106.593 Y137.800 E37.56481 ; perimeter
 G1 X106.593 Y134.000 E37.67764 ; perimeter
 G1 X107.835 Y134.000 E37.71450 ; perimeter
 G1 X108.207 Y136.222 E37.78140 ; perimeter
 G1 X108.207 Y137.482 E37.81882 ; perimeter
 G1 X107.772 Y138.311 E37.84660 ; perimeter
 G1 X107.001 Y138.843 E37.87439 ; perimeter
 G1 X105.706 Y139.000 E37.91313 ; perimeter
 G1 X93.690 Y139.000 E38.26991 ; perimeter
 G1 X92.697 Y138.624 E38.30142 ; perimeter
 G1 X92.077 Y137.923 E38.32921 ; perimeter
 G1 X91.795 Y136.780 E38.36417 ; perimeter
 G1 X92.281 Y61.000 E40.61422 ; perimeter
 G1 X94.823 Y61.000 E40.68969 ; perimeter
 G1 X94.823 Y71.000 E40.98660 ; perimeter
 G1 X97.299 Y71.000 E41.06014 ; perimeter
 G1 X105.833 Y122.029 E42.59630 ; perimeter
 G1 X93.823 Y122.029 E42.95291 ; perimeter
 G1 X93.823 Y133.940 E43.30655 ; perimeter
 G1 X98.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 X104.808 Y133.015 E43.48470 F7200.000 ; perimeter
 G1 X104.808 Y136.015 E43.57377 ; perimeter
 G1 X98.808 Y136.015 E43.75192 ; perimeter
 G1 X98.808 Y133.075 E43.83921 ; perimeter
 G1 X98.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X104.987 Y132.615 E44.23940 F1800.000 ; infill
 G1 X106.795 Y135.324 F12000.000 ; move to first infill point
 G1 X107.850 Y135.324 E44.28827 F7200.000 ; infill
 G1 F9600
 G1 X106.795 Y135.324 E44.03772 ; wipe and retract
 G1 E39.28827 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z3.200 F12000.000 ; lift Z
 G1 X96.821 Y135.324 F12000.000 ; move to first infill point
 G1 Z2.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X92.017 Y135.324 E5.22256 F7200.000 ; infill
 G1 X92.017 Y134.767 E5.24836 ; infill
 G1 X93.621 Y134.034 E5.33008 ; infill
 G1 X93.621 Y130.593 F12000.000 ; move to first infill point
 G1 X93.215 Y130.593 E5.34896 F7200.000 ; infill
 G1 X92.059 Y130.034 F12000.000 ; move to first infill point
 G1 X93.621 Y130.034 E5.42151 F7200.000 ; infill
 G1 X93.621 Y129.476 E5.44745 ; infill
 G1 X92.059 Y129.476 E5.52001 ; infill
 G1 X92.059 Y128.917 E5.54595 ; infill
 G1 X93.621 Y128.917 E5.61850 ; infill
 G1 X93.621 Y128.359 E5.64445 ; infill
 G1 X92.059 Y128.359 E5.71700 ; infill
 G1 X92.059 Y127.800 E5.74294 ; infill
 G1 X93.621 Y127.800 E5.81549 ; infill
 G1 X93.621 Y127.241 E5.84144 ; infill
 G1 X92.059 Y127.241 E5.91399 ; infill
 G1 X92.061 Y126.683 E5.93993 ; infill
 G1 X93.621 Y126.683 E6.01240 ; infill
 G1 X93.621 Y126.124 E6.03834 ; infill
 G1 X92.065 Y126.124 E6.11064 ; infill
 G1 X92.068 Y125.566 E6.13659 ; infill
 G1 X93.621 Y125.566 E6.20872 ; infill
 G1 X93.621 Y125.007 E6.23466 ; infill
 G1 X92.072 Y125.007 E6.30663 ; infill
 G1 X92.075 Y124.449 E6.33257 ; infill
 G1 X93.621 Y124.449 E6.40437 ; infill
 G1 X93.621 Y123.890 E6.43032 ; infill
 G1 X92.079 Y123.890 E6.50195 ; infill
 G1 X92.083 Y123.331 E6.52789 ; infill
 G1 X93.621 Y123.331 E6.59936 ; infill
 G1 X93.621 Y122.773 E6.62531 ; infill
 G1 X92.086 Y122.773 E6.69661 ; infill
 G1 X92.090 Y122.214 E6.72255 ; infill
 G1 X93.621 Y122.214 E6.79369 ; infill
 G1 X105.533 Y121.656 F12000.000 ; move to first infill point
 G1 X92.093 Y121.656 E7.41789 F7200.000 ; infill
 G1 X92.097 Y121.097 E7.44384 ; infill
 G1 X105.471 Y121.097 E8.06500 ; infill
 G1 X105.377 Y120.538 E8.09131 ; infill
 G1 X92.101 Y120.538 E8.70797 ; infill
 G1 X92.104 Y119.980 E8.73391 ; infill
 G1 X105.284 Y119.980 E9.34607 ; infill
 G1 X105.190 Y119.421 E9.37237 ; infill
 G1 X92.108 Y119.421 E9.98002 ; infill
 G1 X92.111 Y118.863 E10.00596 ; infill
 G1 X105.097 Y118.863 E10.60911 ; infill
 G1 X105.004 Y118.304 E10.63541 ; infill
 G1 X92.115 Y118.304 E11.23405 ; infill
 G1 X92.118 Y117.745 E11.26000 ; infill
 G1 X104.910 Y117.745 E11.85413 ; infill
 G1 X104.817 Y117.187 E11.88044 ; infill
 G1 X92.122 Y117.187 E12.47006 ; infill
 G1 X92.126 Y116.628 E12.49601 ; infill
 G1 X104.723 Y116.628 E13.08113 ; infill
 G1 X104.630 Y116.070 E13.10744 ; infill
 G1 X92.129 Y116.070 E13.68806 ; infill
 G1 X92.133 Y115.511 E13.71400 ; infill
 G1 X104.537 Y115.511 E14.29012 ; infill
 G1 X104.443 Y114.953 E14.31642 ; infill
 G1 X92.136 Y114.953 E14.88803 ; infill
 G1 X92.140 Y114.394 E14.91397 ; infill
 G1 X104.350 Y114.394 E15.48108 ; infill
 G1 X104.256 Y113.835 E15.50738 ; infill
 G1 X92.143 Y113.835 E16.06998 ; infill
 G1 X92.147 Y113.277 E16.09593 ; infill
 G1 X104.163 Y113.277 E16.65402 ; infill
 G1 X104.069 Y112.718 E16.68033 ; infill
 G1 X92.151 Y112.718 E17.23391 ; infill
 G1 X92.154 Y112.160 E17.25986 ; infill
 G1 X103.976 Y112.160 E17.80894 ; infill
 G1 X103.883 Y111.601 E17.83525 ; infill
 G1 X92.158 Y111.601 E18.37983 ; infill
 G1 X92.161 Y111.042 E18.40577 ; infill
 G1 X103.789 Y111.042 E18.94585 ; infill
 G1 X103.696 Y110.484 E18.97215 ; infill
 G1 X92.165 Y110.484 E19.50772 ; infill
 G1 X92.169 Y109.925 E19.53366 ; infill
 G1 X103.602 Y109.925 E20.06473 ; infill
 G1 X103.509 Y109.367 E20.09103 ; infill
 G1 X92.172 Y109.367 E20.61759 ; infill
 G1 X92.176 Y108.808 E20.64354 ; infill
 G1 X103.416 Y108.808 E21.16559 ; infill
 G1 X103.322 Y108.249 E21.19190 ; infill
 G1 X92.179 Y108.249 E21.70944 ; infill
 G1 X92.183 Y107.691 E21.73539 ; infill
 G1 X103.229 Y107.691 E22.24843 ; infill
 G1 X103.135 Y107.132 E22.27474 ; infill
 G1 X92.186 Y107.132 E22.78328 ; infill
 G1 X92.190 Y106.574 E22.80922 ; infill
 G1 X103.042 Y106.574 E23.31326 ; infill
 G1 X102.949 Y106.015 E23.33956 ; infill
 G1 X92.194 Y106.015 E23.83909 ; infill
 G1 X92.197 Y105.457 E23.86503 ; infill
 G1 X102.855 Y105.457 E24.36006 ; infill
 G1 X102.762 Y104.898 E24.38636 ; infill
 G1 X92.201 Y104.898 E24.87688 ; infill
 G1 X92.204 Y104.339 E24.90283 ; infill
 G1 X102.668 Y104.339 E25.38884 ; infill
 G1 X102.575 Y103.781 E25.41515 ; infill
 G1 X92.208 Y103.781 E25.89665 ; infill
 G1 X92.212 Y103.222 E25.92260 ; infill
 G1 X102.481 Y103.222 E26.39960 ; infill
 G1 X102.388 Y102.664 E26.42591 ; infill
 G1 X92.215 Y102.664 E26.89841 ; infill
 G1 X92.219 Y102.105 E26.92435 ; infill
 G1 X102.295 Y102.105 E27.39235 ; infill
 G1 X102.201 Y101.546 E27.41865 ; infill
 G1 X92.222 Y101.546 E27.88214 ; infill
 G1 X92.226 Y100.988 E27.90809 ; infill
 G1 X102.108 Y100.988 E28.36707 ; infill
 G1 X102.014 Y100.429 E28.39337 ; infill
 G1 X92.229 Y100.429 E28.84785 ; infill
 G1 X92.233 Y99.871 E28.87380 ; infill
 G1 X101.921 Y99.871 E29.32377 ; infill
 G1 X101.828 Y99.312 E29.35008 ; infill
 G1 X92.237 Y99.312 E29.79555 ; infill
 G1 X92.240 Y98.754 E29.82149 ; infill
 G1 X101.734 Y98.754 E30.26245 ; infill
 G1 X101.641 Y98.195 E30.28876 ; infill
 G1 X92.244 Y98.195 E30.72522 ; infill
 G1 X92.247 Y97.636 E30.75116 ; infill
 G1 X101.547 Y97.636 E31.18312 ; infill
 G1 X101.454 Y97.078 E31.20942 ; infill
 G1 X92.251 Y97.078 E31.63687 ; infill
 G1 X92.255 Y96.519 E31.66282 ; infill
 G1 X101.361 Y96.519 E32.08576 ; infill
 G1 X101.267 Y95.961 E32.11206 ; infill
 G1 X92.258 Y95.961 E32.53050 ; infill
 G1 X92.262 Y95.402 E32.55645 ; infill
 G1 X101.174 Y95.402 E32.97038 ; infill
 G1 X101.080 Y94.843 E32.99669 ; infill
 G1 X92.265 Y94.843 E33.40612 ; infill
 G1 X92.269 Y94.285 E33.43206 ; infill
 G1 X100.987 Y94.285 E33.83699 ; infill
 G1 X100.893 Y93.726 E33.86329 ; infill
 G1 X92.272 Y93.726 E34.26371 ; infill
 G1 X92.276 Y93.168 E34.28965 ; infill
 G1 X100.800 Y93.168 E34.68557 ; infill
 G1 X100.707 Y92.609 E34.71187 ; infill
 G1 X92.280 Y92.609 E35.10328 ; infill
 G1 X92.283 Y92.050 E35.12923 ; infill
 G1 X100.613 Y92.050 E35.51613 ; infill
 G1 X100.520 Y91.492 E35.54244 ; infill
 G1 X92.287 Y91.492 E35.92483 ; infill
 G1 X92.290 Y90.933 E35.95078 ; infill
 G1 X100.426 Y90.933 E36.32867 ; infill
 G1 X100.333 Y90.375 E36.35498 ; infill
 G1 X92.294 Y90.375 E36.72837 ; infill
 G1 X92.297 Y89.816 E36.75431 ; infill
 G1 X100.240 Y89.816 E37.12320 ; infill
 G1 X100.146 Y89.258 E37.14950 ; infill
 G1 X92.301 Y89.258 E37.51388 ; infill
 G1 X92.305 Y88.699 E37.53983 ; infill
 G1 X100.053 Y88.699 E37.89970 ; infill
 G1 X99.959 Y88.140 E37.92600 ; infill
 G1 X92.308 Y88.140 E38.28137 ; infill
 G1 X92.312 Y87.582 E38.30732 ; infill
 G1 X99.866 Y87.582 E38.65818 ; infill
 G1 X99.772 Y87.023 E38.68449 ; infill
 G1 X92.315 Y87.023 E39.03085 ; infill
 G1 X92.319 Y86.465 E39.05679 ; infill
 G1 X99.679 Y86.465 E39.39864 ; infill
 G1 X99.586 Y85.906 E39.42495 ; infill
 G1 X92.323 Y85.906 E39.76230 ; infill
 G1 X92.326 Y85.347 E39.78824 ; infill
 G1 X99.492 Y85.347 E40.12109 ; infill
 G1 X99.399 Y84.789 E40.14739 ; infill
 G1 X92.330 Y84.789 E40.47573 ; infill
 G1 X92.333 Y84.230 E40.50168 ; infill
 G1 X99.305 Y84.230 E40.82551 ; infill
 G1 X99.212 Y83.672 E40.85182 ; infill
 G1 X92.337 Y83.672 E41.17114 ; infill
 G1 X92.340 Y83.113 E41.19709 ; infill
 G1 X99.119 Y83.113 E41.51191 ; infill
 G1 X99.025 Y82.554 E41.53822 ; infill
 G1 X92.344 Y82.554 E41.84854 ; infill
 G1 X92.348 Y81.996 E41.87448 ; infill
 G1 X98.932 Y81.996 E42.18030 ; infill
 G1 X98.838 Y81.437 E42.20660 ; infill
 G1 X92.351 Y81.437 E42.50791 ; infill
 G1 X92.355 Y80.879 E42.53386 ; infill
 G1 X98.745 Y80.879 E42.83066 ; infill
 G1 X98.652 Y80.320 E42.85696 ; infill
 G1 X92.358 Y80.320 E43.14926 ; infill
 G1 X92.362 Y79.762 E43.17521 ; infill
 G1 X98.558 Y79.762 E43.46300 ; infill
 G1 X98.465 Y79.203 E43.48931 ; infill
 G1 X92.366 Y79.203 E43.77260 ; infill
 G1 X92.369 Y78.644 E43.79854 ; infill
 G1 X98.371 Y78.644 E44.07732 ; infill
 G1 X98.278 Y78.086 E44.10363 ; infill
 G1 X92.373 Y78.086 E44.37791 ; infill
 G1 X92.376 Y77.527 E44.40385 ; infill
 G1 X98.184 Y77.527 E44.67363 ; infill
 G1 X98.091 Y76.969 E44.69993 ; infill
 G1 X92.380 Y76.969 E44.96520 ; infill
 G1 X92.383 Y76.410 E44.99115 ; infill
 G1 X97.998 Y76.410 E45.25191 ; infill
 G1 X97.904 Y75.851 E45.27822 ; infill
 G1 X92.387 Y75.851 E45.53447 ; infill
 G1 X92.391 Y75.293 E45.56042 ; infill
 G1 X97.811 Y75.293 E45.81217 ; infill
 G1 X97.717 Y74.734 E45.83848 ; infill
 G1 X92.394 Y74.734 E46.08573 ; infill
 G1 X92.398 Y74.176 E46.11167 ; infill
 G1 X97.624 Y74.176 E46.35442 ; infill
 G1 X97.531 Y73.617 E46.38072 ; infill
 G1 X92.401 Y73.617 E46.61896 ; infill
 G1 X92.405 Y73.058 E46.64491 ; infill
 G1 X97.437 Y73.058 E46.87864 ; infill
 G1 X97.344 Y72.500 E46.90494 ; infill
 G1 X92.408 Y72.500 E47.13417 ; infill
 G1 X92.412 Y71.941 E47.16012 ; infill
 G1 X97.250 Y71.941 E47.38484 ; infill
 G1 X97.157 Y71.383 E47.41115 ; infill
 G1 X92.416 Y71.383 E47.63137 ; infill
 G1 X94.621 Y70.824 F12000.000 ; move to first infill point
 G1 X92.419 Y70.824 E47.73365 F7200.000 ; infill
 G1 X92.423 Y70.266 E47.75959 ; infill
 G1 X94.621 Y70.266 E47.86171 ; infill
 G1 X94.621 Y69.707 E47.88765 ; infill
 G1 X92.426 Y69.707 E47.98960 ; infill
 G1 X92.430 Y69.148 E48.01555 ; infill
 G1 X94.621 Y69.148 E48.11733 ; infill
 G1 X94.621 Y68.590 E48.14327 ; infill
 G1 X92.434 Y68.590 E48.24489 ; infill
 G1 X92.437 Y68.031 E48.27083 ; infill
 G1 X94.621 Y68.031 E48.37228 ; infill
 G1 X94.621 Y67.473 E48.39823 ; infill
 G1 X92.441 Y67.473 E48.49951 ; infill
 G1 X92.444 Y66.914 E48.52545 ; infill
 G1 X94.621 Y66.914 E48.62657 ; infill
 G1 X94.621 Y66.355 E48.65252 ; infill
 G1 X92.448 Y66.355 E48.75346 ; infill
 G1 X92.451 Y65.797 E48.77941 ; infill
 G1 X94.621 Y65.797 E48.88019 ; infill
 G1 X94.621 Y65.238 E48.90614 ; infill
 G1 X92.455 Y65.238 E49.00676 ; infill
 G1 X92.459 Y64.680 E49.03270 ; infill
 G1 X94.621 Y64.680 E49.13315 ; infill
 G1 X92.442 Y64.223 F12000.000 ; move to first infill point
 G1 X94.641 Y64.223 E49.20024 F7200.000 ; infill
 G1 X94.641 Y63.856 E49.21143 ; infill
 G1 X92.442 Y63.856 E49.27851 ; infill
 G1 X92.442 Y63.489 E49.28970 ; infill
 G1 X94.641 Y63.489 E49.35678 ; infill
 G1 X94.641 Y63.122 E49.36797 ; infill
 G1 X92.442 Y63.122 E49.43505 ; infill
 G1 X92.442 Y62.756 E49.44624 ; infill
 G1 X94.641 Y62.756 E49.51333 ; infill
 G1 X94.641 Y62.389 E49.52451 ; infill
 G1 X92.442 Y62.389 E49.59160 ; infill
 G1 X92.442 Y62.022 E49.60278 ; infill
 G1 X94.641 Y62.022 E49.66987 ; infill
 G1 X94.641 Y61.655 E49.68105 ; infill
 G1 X92.442 Y61.655 E49.74814 ; infill
 G1 X92.442 Y61.288 E49.75932 ; infill
 G1 X94.641 Y61.288 E49.82641 ; infill
 M106 S226.95 ; enable fan
 G1 F9600
 G1 X92.442 Y61.288 E49.30396 ; wipe and retract
 G1 F9600
 G1 X92.442 Y61.655 E49.21685 ; wipe and retract
 G1 F9600
 G1 X94.641 Y61.655 E48.69440 ; wipe and retract
 G1 F9600
 G1 X94.641 Y62.022 E48.60729 ; wipe and retract
 G1 F9600
 G1 X92.442 Y62.022 E48.08484 ; wipe and retract
 G1 F9600
 G1 X92.442 Y62.389 E47.99773 ; wipe and retract
 G1 F9600
 G1 X94.641 Y62.389 E47.47528 ; wipe and retract
 G1 F9600
 G1 X94.641 Y62.756 E47.38817 ; wipe and retract
 G1 F9600
 G1 X92.442 Y62.756 E46.86572 ; wipe and retract
 G1 F9600
 G1 X92.442 Y63.122 E46.77861 ; wipe and retract
 G1 F9600
 G1 X94.641 Y63.122 E46.25616 ; wipe and retract
 G1 F9600
 G1 X94.641 Y63.489 E46.16905 ; wipe and retract
 G1 F9600
 G1 X92.442 Y63.489 E45.64660 ; wipe and retract
 G1 F9600
 G1 X92.442 Y63.856 E45.55949 ; wipe and retract
 G1 F9600
 G1 X94.476 Y63.856 E45.07641 ; wipe and retract
 G1 E44.82641 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z3.200 F12000.000 ; lift Z
 G1 X95.608 Y132.215 F12000.000 ; move to first perimeter point
 G1 Z2.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X109.346 Y132.215 E5.40791 F7200.000 ; perimeter
 G1 X109.992 Y136.074 E5.52409 ; perimeter
 G1 X109.992 Y137.923 E5.57898 ; perimeter
 G1 X109.148 Y139.531 E5.63290 ; perimeter
 G1 X107.653 Y140.562 E5.68681 ; perimeter
 G1 X105.814 Y140.785 E5.74183 ; perimeter
 G1 X93.363 Y140.785 E6.11153 ; perimeter
 G1 X91.653 Y140.137 E6.16582 ; perimeter
 G1 X90.449 Y138.778 E6.21974 ; perimeter
 G1 X90.008 Y136.991 E6.27438 ; perimeter
 G1 X90.480 Y63.401 E8.45940 ; perimeter
 G1 X96.608 Y63.401 E8.64135 ; perimeter
 G1 X96.608 Y69.215 E8.81396 ; perimeter
 G1 X98.811 Y69.215 E8.87937 ; perimeter
 G1 X107.942 Y123.815 E10.52303 ; perimeter
 G1 X95.608 Y123.815 E10.88923 ; perimeter
 G1 X95.608 Y132.155 E11.13685 ; perimeter
 G1 X95.608 Y132.615 F12000.000 ; move inwards before travel
 G1 X95.251 Y132.572 F12000.000 ; move to first perimeter point
 G1 X98.451 Y132.572 E11.23187 F7200.000 ; perimeter
 G1 X98.451 Y136.372 E11.34469 ; perimeter
 G1 X105.165 Y136.372 E11.54404 ; perimeter
 G1 X105.165 Y132.572 E11.65687 ; perimeter
 G1 X109.044 Y132.572 E11.77204 ; perimeter
 G1 X109.635 Y136.104 E11.87837 ; perimeter
 G1 X109.635 Y137.835 E11.92976 ; perimeter
 G1 X108.873 Y139.287 E11.97845 ; perimeter
 G1 X107.523 Y140.218 E12.02714 ; perimeter
 G1 X105.792 Y140.428 E12.07891 ; perimeter
 G1 X93.428 Y140.428 E12.44602 ; perimeter
 G1 X91.862 Y139.834 E12.49576 ; perimeter
 G1 X90.774 Y138.607 E12.54445 ; perimeter
 G1 X90.366 Y136.949 E12.59515 ; perimeter
 G1 X90.835 Y63.758 E14.76832 ; perimeter
 G1 X96.251 Y63.758 E14.92913 ; perimeter
 G1 X96.251 Y69.572 E15.10174 ; perimeter
 G1 X98.509 Y69.572 E15.16878 ; perimeter
 G1 X107.520 Y123.458 E16.79093 ; perimeter
 G1 X95.251 Y123.458 E17.15522 ; perimeter
 G1 X95.251 Y132.512 E17.42405 ; perimeter
 G1 X94.894 Y132.929 F12000.000 ; move to first perimeter point
 G1 X98.094 Y132.929 E17.51906 F7200.000 ; perimeter
 G1 X98.094 Y136.729 E17.63189 ; perimeter
 G1 X105.522 Y136.729 E17.85244 ; perimeter
 G1 X105.522 Y132.929 E17.96527 ; perimeter
 G1 X108.742 Y132.929 E18.06086 ; perimeter
 G1 X109.278 Y136.133 E18.15733 ; perimeter
 G1 X109.278 Y137.747 E18.20523 ; perimeter
 G1 X108.597 Y139.043 E18.24869 ; perimeter
 G1 X107.393 Y139.874 E18.29216 ; perimeter
 G1 X105.771 Y140.071 E18.34067 ; perimeter
 G1 X93.493 Y140.071 E18.70520 ; perimeter
 G1 X92.071 Y139.532 E18.75038 ; perimeter
 G1 X91.100 Y138.436 E18.79384 ; perimeter
 G1 X90.723 Y136.906 E18.84061 ; perimeter
 G1 X91.190 Y64.115 E21.00192 ; perimeter
 G1 X95.894 Y64.115 E21.14160 ; perimeter
 G1 X95.894 Y69.929 E21.31421 ; perimeter
 G1 X98.206 Y69.929 E21.38287 ; perimeter
 G1 X107.098 Y123.100 E22.98353 ; perimeter
 G1 X94.894 Y123.100 E23.34589 ; perimeter
 G1 X94.894 Y132.869 E23.63592 ; perimeter
 G1 X94.537 Y133.286 F12000.000 ; move to first perimeter point
 G1 X97.737 Y133.286 E23.73094 F7200.000 ; perimeter
 G1 X97.737 Y137.086 E23.84376 ; perimeter
 G1 X105.879 Y137.086 E24.08552 ; perimeter
 G1 X105.879 Y133.286 E24.19835 ; perimeter
 G1 X108.440 Y133.286 E24.27436 ; perimeter
 G1 X108.921 Y136.163 E24.36097 ; perimeter
 G1 X108.921 Y137.659 E24.40538 ; perimeter
 G1 X108.322 Y138.799 E24.44362 ; perimeter
 G1 X107.262 Y139.530 E24.48186 ; perimeter
 G1 X105.749 Y139.714 E24.52712 ; perimeter
 G1 X93.559 Y139.714 E24.88906 ; perimeter
 G1 X92.280 Y139.229 E24.92968 ; perimeter
 G1 X91.426 Y138.265 E24.96792 ; perimeter
 G1 X91.080 Y136.864 E25.01076 ; perimeter
 G1 X91.544 Y64.472 E27.16021 ; perimeter
 G1 X95.537 Y64.472 E27.27875 ; perimeter
 G1 X95.537 Y70.286 E27.45136 ; perimeter
 G1 X97.904 Y70.286 E27.52164 ; perimeter
 G1 X106.677 Y122.743 E29.10080 ; perimeter
 G1 X94.537 Y122.743 E29.46125 ; perimeter
 G1 X94.537 Y133.226 E29.77249 ; perimeter
 G1 X94.180 Y133.643 F12000.000 ; move to first perimeter point
 G1 X97.380 Y133.643 E29.86750 F7200.000 ; perimeter
 G1 X97.380 Y137.443 E29.98032 ; perimeter
 G1 X106.236 Y137.443 E30.24329 ; perimeter
 G1 X106.236 Y133.643 E30.35612 ; perimeter
 G1 X108.137 Y133.643 E30.41255 ; perimeter
 G1 X108.564 Y136.193 E30.48930 ; perimeter
 G1 X108.564 Y137.571 E30.53022 ; perimeter
 G1 X108.047 Y138.555 E30.56323 ; perimeter
 G1 X107.132 Y139.187 E30.59624 ; perimeter
 G1 X105.728 Y139.357 E30.63825 ; perimeter
 G1 X93.624 Y139.357 E30.99760 ; perimeter
 G1 X92.488 Y138.926 E31.03367 ; perimeter
 G1 X91.751 Y138.094 E31.06668 ; perimeter
 G1 X91.438 Y136.822 E31.10558 ; perimeter
 G1 X91.899 Y64.829 E33.24318 ; perimeter
 G1 X95.180 Y64.829 E33.34059 ; perimeter
 G1 X95.180 Y70.643 E33.51319 ; perimeter
 G1 X97.602 Y70.643 E33.58511 ; perimeter
 G1 X106.255 Y122.386 E35.14277 ; perimeter
 G1 X94.180 Y122.386 E35.50129 ; perimeter
 G1 X94.180 Y133.583 E35.83373 ; perimeter
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 X97.023 Y134.000 E35.92874 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E36.04157 ; perimeter
 G1 X106.593 Y137.800 E36.32574 ; perimeter
 G1 X106.593 Y134.000 E36.43857 ; perimeter
 G1 X107.835 Y134.000 E36.47543 ; perimeter
 G1 X108.207 Y136.222 E36.54232 ; perimeter
 G1 X108.207 Y137.482 E36.57974 ; perimeter
 G1 X107.772 Y138.311 E36.60753 ; perimeter
 G1 X107.001 Y138.843 E36.63531 ; perimeter
 G1 X105.706 Y139.000 E36.67406 ; perimeter
 G1 X93.690 Y139.000 E37.03084 ; perimeter
 G1 X92.697 Y138.624 E37.06235 ; perimeter
 G1 X92.077 Y137.923 E37.09013 ; perimeter
 G1 X91.795 Y136.780 E37.12510 ; perimeter
 G1 X92.254 Y65.187 E39.25084 ; perimeter
 G1 X94.823 Y65.187 E39.32711 ; perimeter
 G1 X94.823 Y71.000 E39.49971 ; perimeter
 G1 X97.299 Y71.000 E39.57325 ; perimeter
 G1 X105.833 Y122.029 E41.10942 ; perimeter
 G1 X93.823 Y122.029 E41.46602 ; perimeter
 G1 X93.823 Y133.940 E41.81966 ; perimeter
 G1 X98.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 X104.808 Y133.015 E41.99781 F7200.000 ; perimeter
 G1 X104.808 Y136.015 E42.08689 ; perimeter
 G1 X98.808 Y136.015 E42.26503 ; perimeter
 G1 X98.808 Y133.075 E42.35233 ; perimeter
 G1 X98.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X104.987 Y132.615 E42.75251 F1800.000 ; infill
 G1 F9600
 G1 X98.630 Y132.615 E41.24271 ; wipe and retract
 G1 E37.75251 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z3.400 F12000.000 ; lift Z
 G1 X103.671 Y138.799 F12000.000 ; move to first infill point
 G1 Z2.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.671 Y138.001 E5.03693 F7200.000 ; infill
 G1 X100.052 Y138.799 E5.20860 ; infill
 G1 X99.726 Y138.001 E5.24851 ; infill
 G1 X92.530 Y138.046 E5.58183 ; infill
 G1 X92.530 Y128.685 E6.01545 ; infill
 G1 X93.416 Y129.052 E6.05989 ; infill
 G1 X93.454 Y129.440 E6.07795 ; infill
 G1 X93.381 Y128.812 F12000.000 ; move to first infill point
 G1 X93.381 Y65.408 E9.08824 F7200.000 ; infill
 G1 X92.810 Y65.408 E9.11535 ; infill
 G1 X92.810 Y128.575 E12.11442 ; infill
 G1 X92.239 Y128.339 E12.14376 ; infill
 G1 X92.239 Y124.865 E12.30868 ; infill
 G1 X93.952 Y121.828 F12000.000 ; move to first infill point
 G1 X93.952 Y65.408 E14.98739 F7200.000 ; infill
 G1 X94.523 Y71.201 F12000.000 ; move to first infill point
 G1 X94.523 Y121.828 E17.39105 F7200.000 ; infill
 G1 X95.094 Y121.828 E17.41815 ; infill
 G1 X95.094 Y71.201 E19.82181 ; infill
 G1 X95.665 Y71.201 E19.84892 ; infill
 G1 X95.665 Y121.828 E22.25257 ; infill
 G1 X96.236 Y121.828 E22.27968 ; infill
 G1 X96.236 Y71.201 E24.68333 ; infill
 G1 X96.807 Y71.201 E24.71044 ; infill
 G1 X96.807 Y121.828 E27.11409 ; infill
 G1 X97.378 Y121.828 E27.14120 ; infill
 G1 X97.378 Y73.535 E29.43404 ; infill
 G1 X97.949 Y76.950 F12000.000 ; move to first infill point
 G1 X97.949 Y121.828 E31.56476 F7200.000 ; infill
 G1 X98.520 Y121.828 E31.59187 ; infill
 G1 X98.520 Y80.364 E33.56048 ; infill
 G1 X99.091 Y83.779 F12000.000 ; move to first infill point
 G1 X99.091 Y121.828 E35.36698 F7200.000 ; infill
 G1 X99.662 Y121.828 E35.39409 ; infill
 G1 X99.662 Y87.193 E37.03848 ; infill
 G1 X100.233 Y90.608 F12000.000 ; move to first infill point
 G1 X100.233 Y121.828 E38.52075 F7200.000 ; infill
 G1 X100.804 Y121.828 E38.54786 ; infill
 G1 X100.804 Y94.022 E39.86803 ; infill
 G1 X101.375 Y97.436 F12000.000 ; move to first infill point
 G1 X101.375 Y121.828 E41.02609 F7200.000 ; infill
 G1 X101.946 Y121.828 E41.05320 ; infill
 G1 X101.946 Y100.851 E42.04914 ; infill
 G1 X102.517 Y104.265 F12000.000 ; move to first infill point
 G1 X102.517 Y121.828 E42.88298 F7200.000 ; infill
 G1 X103.088 Y121.828 E42.91009 ; infill
 G1 X103.088 Y107.680 E43.58181 ; infill
 G1 X103.659 Y111.094 F12000.000 ; move to first infill point
 G1 X103.659 Y121.828 E44.09142 F7200.000 ; infill
 G1 X104.230 Y121.828 E44.11853 ; infill
 G1 X104.230 Y114.509 E44.46603 ; infill
 G1 X104.801 Y117.923 F12000.000 ; move to first infill point
 G1 X104.801 Y121.828 E44.65142 F7200.000 ; infill
 G1 X105.372 Y121.337 E44.68716 ; infill
 G1 X105.372 Y121.818 E44.70997 ; infill
 G1 F9600
 G1 X105.372 Y121.337 E44.59584 ; wipe and retract
 G1 F9600
 G1 X104.801 Y121.828 E44.41709 ; wipe and retract
 G1 F9600
 G1 X104.801 Y117.923 E43.48971 ; wipe and retract
 G1 E39.70997 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z3.400 F12000.000 ; lift Z
 G1 X96.608 Y62.628 F12000.000 ; move to first perimeter point
 G1 Z2.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X90.485 Y62.628 E5.18180 F7200.000 ; perimeter
 G1 X90.507 Y59.215 E5.28316 ; perimeter
 G1 X96.608 Y59.215 E5.46431 ; perimeter
 G1 X96.608 Y62.568 E5.56388 ; perimeter
 G1 X96.262 Y62.428 F12000.000 ; move inwards before travel
 G1 X96.251 Y62.271 F12000.000 ; move to first perimeter point
 G1 X90.844 Y62.271 E5.72441 F7200.000 ; perimeter
 G1 X90.862 Y59.572 E5.80456 ; perimeter
 G1 X96.251 Y59.572 E5.96458 ; perimeter
 G1 X96.251 Y62.211 E6.04294 ; perimeter
 G1 X95.894 Y61.914 F12000.000 ; move to first perimeter point
 G1 X91.204 Y61.914 E6.18220 F7200.000 ; perimeter
 G1 X91.216 Y59.929 E6.24114 ; perimeter
 G1 X95.894 Y59.929 E6.38002 ; perimeter
 G1 X95.894 Y61.854 E6.43718 ; perimeter
 G1 X95.537 Y61.557 F12000.000 ; move to first perimeter point
 G1 X91.563 Y61.557 E6.55517 F7200.000 ; perimeter
 G1 X91.571 Y60.286 E6.59291 ; perimeter
 G1 X95.537 Y60.286 E6.71065 ; perimeter
 G1 X95.537 Y61.497 E6.74661 ; perimeter
 G1 X95.180 Y61.200 F12000.000 ; move to first perimeter point
 G1 X91.922 Y61.200 E6.84332 F7200.000 ; perimeter
 G1 X91.926 Y60.643 E6.85985 ; perimeter
 G1 X95.180 Y60.643 E6.95646 ; perimeter
 G1 X95.180 Y61.140 E6.97121 ; perimeter
 G1 X95.001 Y60.921 F12000.000 ; move to first infill point
 G1 X92.103 Y60.921 E7.05727 F1800.000 ; infill
 G1 F9600
 G1 X95.001 Y60.921 E6.36888 ; wipe and retract
 G1 E2.05727 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z3.400 F12000.000 ; lift Z
 M106 S224.4 ; enable fan
 G1 X96.608 Y69.215 F12000.000 ; move to first perimeter point
 G1 Z2.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.811 Y69.215 E5.06541 F7200.000 ; perimeter
 G1 X107.942 Y123.815 E6.70907 ; perimeter
 G1 X95.608 Y123.815 E7.07527 ; perimeter
 G1 X95.608 Y132.215 E7.32468 ; perimeter
 G1 X109.346 Y132.215 E7.73258 ; perimeter
 G1 X109.992 Y136.074 E7.84876 ; perimeter
 G1 X109.992 Y137.923 E7.90365 ; perimeter
 G1 X109.148 Y139.531 E7.95757 ; perimeter
 G1 X107.653 Y140.562 E8.01149 ; perimeter
 G1 X105.814 Y140.785 E8.06651 ; perimeter
 G1 X93.363 Y140.785 E8.43620 ; perimeter
 G1 X91.653 Y140.137 E8.49050 ; perimeter
 G1 X90.449 Y138.778 E8.54441 ; perimeter
 G1 X90.008 Y136.991 E8.59905 ; perimeter
 G1 X90.478 Y63.739 E10.77404 ; perimeter
 G1 X96.608 Y63.739 E10.95606 ; perimeter
 G1 X96.608 Y69.155 E11.11685 ; perimeter
 G1 X96.608 Y69.615 F12000.000 ; move inwards before travel
 G1 X96.251 Y69.572 F12000.000 ; move to first perimeter point
 G1 X98.509 Y69.572 E11.18389 F7200.000 ; perimeter
 G1 X107.520 Y123.458 E12.80604 ; perimeter
 G1 X95.251 Y123.458 E13.17033 ; perimeter
 G1 X95.251 Y132.572 E13.44094 ; perimeter
 G1 X98.451 Y132.572 E13.53595 ; perimeter
 G1 X98.451 Y136.372 E13.64878 ; perimeter
 G1 X105.165 Y136.372 E13.84813 ; perimeter
 G1 X105.165 Y132.572 E13.96095 ; perimeter
 G1 X109.044 Y132.572 E14.07613 ; perimeter
 G1 X109.635 Y136.104 E14.18245 ; perimeter
 G1 X109.635 Y137.835 E14.23384 ; perimeter
 G1 X108.873 Y139.287 E14.28254 ; perimeter
 G1 X107.523 Y140.218 E14.33123 ; perimeter
 G1 X105.792 Y140.428 E14.38299 ; perimeter
 G1 X93.428 Y140.428 E14.75010 ; perimeter
 G1 X91.862 Y139.834 E14.79984 ; perimeter
 G1 X90.774 Y138.607 E14.84853 ; perimeter
 G1 X90.366 Y136.949 E14.89924 ; perimeter
 G1 X90.833 Y64.096 E17.06237 ; perimeter
 G1 X96.251 Y64.096 E17.22325 ; perimeter
 G1 X96.251 Y69.512 E17.38404 ; perimeter
 G1 X95.894 Y69.929 F12000.000 ; move to first perimeter point
 G1 X98.206 Y69.929 E17.45270 F7200.000 ; perimeter
 G1 X107.098 Y123.100 E19.05336 ; perimeter
 G1 X94.894 Y123.100 E19.41572 ; perimeter
 G1 X94.894 Y132.929 E19.70754 ; perimeter
 G1 X98.094 Y132.929 E19.80255 ; perimeter
 G1 X98.094 Y136.729 E19.91538 ; perimeter
 G1 X105.522 Y136.729 E20.13593 ; perimeter
 G1 X105.522 Y132.929 E20.24876 ; perimeter
 G1 X108.742 Y132.929 E20.34435 ; perimeter
 G1 X109.278 Y136.133 E20.44082 ; perimeter
 G1 X109.278 Y137.747 E20.48872 ; perimeter
 G1 X108.597 Y139.043 E20.53219 ; perimeter
 G1 X107.393 Y139.874 E20.57565 ; perimeter
 G1 X105.771 Y140.071 E20.62416 ; perimeter
 G1 X93.493 Y140.071 E20.98869 ; perimeter
 G1 X92.071 Y139.532 E21.03387 ; perimeter
 G1 X91.100 Y138.436 E21.07733 ; perimeter
 G1 X90.723 Y136.906 E21.12410 ; perimeter
 G1 X91.187 Y64.453 E23.27538 ; perimeter
 G1 X95.894 Y64.453 E23.41512 ; perimeter
 G1 X95.894 Y69.869 E23.57591 ; perimeter
 G1 X95.537 Y70.286 F12000.000 ; move to first perimeter point
 G1 X97.904 Y70.286 E23.64620 F7200.000 ; perimeter
 G1 X106.677 Y122.743 E25.22536 ; perimeter
 G1 X94.537 Y122.743 E25.58580 ; perimeter
 G1 X94.537 Y133.286 E25.89882 ; perimeter
 G1 X97.737 Y133.286 E25.99383 ; perimeter
 G1 X97.737 Y137.086 E26.10666 ; perimeter
 G1 X105.879 Y137.086 E26.34842 ; perimeter
 G1 X105.879 Y133.286 E26.46125 ; perimeter
 G1 X108.440 Y133.286 E26.53726 ; perimeter
 G1 X108.921 Y136.163 E26.62387 ; perimeter
 G1 X108.921 Y137.659 E26.66828 ; perimeter
 G1 X108.322 Y138.799 E26.70652 ; perimeter
 G1 X107.262 Y139.530 E26.74476 ; perimeter
 G1 X105.749 Y139.714 E26.79001 ; perimeter
 G1 X93.559 Y139.714 E27.15196 ; perimeter
 G1 X92.280 Y139.229 E27.19258 ; perimeter
 G1 X91.426 Y138.265 E27.23082 ; perimeter
 G1 X91.080 Y136.864 E27.27365 ; perimeter
 G1 X91.542 Y64.810 E29.41307 ; perimeter
 G1 X95.537 Y64.810 E29.53168 ; perimeter
 G1 X95.537 Y70.226 E29.69247 ; perimeter
 G1 X95.180 Y70.643 F12000.000 ; move to first perimeter point
 G1 X97.602 Y70.643 E29.76438 F7200.000 ; perimeter
 G1 X106.255 Y122.386 E31.32205 ; perimeter
 G1 X94.180 Y122.386 E31.68057 ; perimeter
 G1 X94.180 Y133.643 E32.01479 ; perimeter
 G1 X97.380 Y133.643 E32.10980 ; perimeter
 G1 X97.380 Y137.443 E32.22263 ; perimeter
 G1 X106.236 Y137.443 E32.48560 ; perimeter
 G1 X106.236 Y133.643 E32.59842 ; perimeter
 G1 X108.137 Y133.643 E32.65486 ; perimeter
 G1 X108.564 Y136.193 E32.73161 ; perimeter
 G1 X108.564 Y137.571 E32.77253 ; perimeter
 G1 X108.047 Y138.555 E32.80554 ; perimeter
 G1 X107.132 Y139.187 E32.83855 ; perimeter
 G1 X105.728 Y139.357 E32.88055 ; perimeter
 G1 X93.624 Y139.357 E33.23991 ; perimeter
 G1 X92.488 Y138.926 E33.27598 ; perimeter
 G1 X91.751 Y138.094 E33.30899 ; perimeter
 G1 X91.438 Y136.822 E33.34789 ; perimeter
 G1 X91.897 Y65.167 E35.47545 ; perimeter
 G1 X95.180 Y65.167 E35.57292 ; perimeter
 G1 X95.180 Y70.583 E35.73372 ; perimeter
 G1 X94.823 Y71.000 F12000.000 ; move to first perimeter point
 G1 X97.299 Y71.000 E35.80725 F7200.000 ; perimeter
 G1 X105.833 Y122.029 E37.34342 ; perimeter
 G1 X93.823 Y122.029 E37.70002 ; perimeter
 G1 X93.823 Y134.000 E38.05545 ; perimeter
 G1 X97.023 Y134.000 E38.15046 ; perimeter
 G1 X97.023 Y137.800 E38.26329 ; perimeter
 G1 X106.593 Y137.800 E38.54745 ; perimeter
 G1 X106.593 Y134.000 E38.66028 ; perimeter
 G1 X107.835 Y134.000 E38.69714 ; perimeter
 G1 X108.207 Y136.222 E38.76403 ; perimeter
 G1 X108.207 Y137.482 E38.80146 ; perimeter
 G1 X107.772 Y138.311 E38.82924 ; perimeter
 G1 X107.001 Y138.843 E38.85703 ; perimeter
 G1 X105.706 Y139.000 E38.89577 ; perimeter
 G1 X93.690 Y139.000 E39.25255 ; perimeter
 G1 X92.697 Y138.624 E39.28406 ; perimeter
 G1 X92.077 Y137.923 E39.31185 ; perimeter
 G1 X91.795 Y136.780 E39.34681 ; perimeter
 G1 X92.252 Y65.524 E41.46252 ; perimeter
 G1 X94.823 Y65.524 E41.53885 ; perimeter
 G1 X94.823 Y70.940 E41.69964 ; perimeter
 G1 F9600
 G1 X97.299 Y71.000 E41.11125 ; wipe and retract
 G1 F9600
 G1 X100.190 Y88.283 E36.94964 ; wipe and retract
 G1 E36.69964 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z3.600 F12000.000 ; lift Z
 G1 X98.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z2.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X104.808 Y133.015 E5.17815 F7200.000 ; perimeter
 G1 X104.808 Y136.015 E5.26722 ; perimeter
 G1 X98.808 Y136.015 E5.44537 ; perimeter
 G1 X98.808 Y133.075 E5.53266 ; perimeter
 G1 X98.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X104.987 Y132.615 E5.93285 F1800.000 ; infill
 G1 F9600
 G1 X98.630 Y132.615 E4.42305 ; wipe and retract
 G1 E0.93285 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z3.600 F12000.000 ; lift Z
 G1 X96.821 Y137.757 F12000.000 ; move to first infill point
 G1 Z2.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.972 Y138.631 E5.09476 F7200.000 ; infill
 G1 X93.621 Y129.753 F12000.000 ; move to first infill point
 G1 X92.041 Y129.753 E5.16794 F7200.000 ; infill
 G1 X92.045 Y129.180 E5.19451 ; infill
 G1 X93.621 Y128.463 E5.27472 ; infill
 G1 X93.215 Y126.697 F12000.000 ; move to first infill point
 G1 X93.621 Y126.697 E5.29356 F7200.000 ; infill
 G1 X93.621 Y126.139 E5.31942 ; infill
 G1 X92.084 Y126.139 E5.39069 ; infill
 G1 X92.084 Y125.582 E5.41655 ; infill
 G1 X93.621 Y125.582 E5.48783 ; infill
 G1 X93.621 Y125.024 E5.51368 ; infill
 G1 X92.084 Y125.024 E5.58496 ; infill
 G1 X92.084 Y124.466 E5.61082 ; infill
 G1 X93.621 Y124.466 E5.68209 ; infill
 G1 X93.621 Y123.909 E5.70795 ; infill
 G1 X92.084 Y123.909 E5.77922 ; infill
 G1 X92.084 Y123.351 E5.80508 ; infill
 G1 X93.621 Y123.351 E5.87635 ; infill
 G1 X93.621 Y122.793 E5.90221 ; infill
 G1 X92.086 Y122.793 E5.97340 ; infill
 G1 X92.090 Y122.236 E5.99926 ; infill
 G1 X93.621 Y122.236 E6.07028 ; infill
 G1 X93.621 Y121.678 E6.09614 ; infill
 G1 X92.093 Y121.678 E6.16699 ; infill
 G1 X92.097 Y121.120 E6.19285 ; infill
 G1 X105.475 Y121.120 E6.81316 ; infill
 G1 X105.381 Y120.563 E6.83938 ; infill
 G1 X92.100 Y120.563 E7.45520 ; infill
 G1 X92.104 Y120.005 E7.48106 ; infill
 G1 X105.288 Y120.005 E8.09239 ; infill
 G1 X105.195 Y119.447 E8.11860 ; infill
 G1 X92.108 Y119.447 E8.72545 ; infill
 G1 X92.111 Y118.890 E8.75130 ; infill
 G1 X105.102 Y118.890 E9.35365 ; infill
 G1 X105.008 Y118.332 E9.37987 ; infill
 G1 X92.115 Y118.332 E9.97773 ; infill
 G1 X92.118 Y117.775 E10.00359 ; infill
 G1 X104.915 Y117.775 E10.59696 ; infill
 G1 X104.822 Y117.217 E10.62318 ; infill
 G1 X92.122 Y117.217 E11.21206 ; infill
 G1 X92.125 Y116.659 E11.23792 ; infill
 G1 X104.729 Y116.659 E11.82231 ; infill
 G1 X104.635 Y116.102 E11.84853 ; infill
 G1 X92.129 Y116.102 E12.42843 ; infill
 G1 X92.133 Y115.544 E12.45428 ; infill
 G1 X104.542 Y115.544 E13.02970 ; infill
 G1 X104.449 Y114.986 E13.05591 ; infill
 G1 X92.136 Y114.986 E13.62683 ; infill
 G1 X92.140 Y114.429 E13.65269 ; infill
 G1 X104.355 Y114.429 E14.21912 ; infill
 G1 X104.262 Y113.871 E14.24534 ; infill
 G1 X92.143 Y113.871 E14.80728 ; infill
 G1 X92.147 Y113.313 E14.83314 ; infill
 G1 X104.169 Y113.313 E15.39059 ; infill
 G1 X104.076 Y112.756 E15.41681 ; infill
 G1 X92.150 Y112.756 E15.96977 ; infill
 G1 X92.154 Y112.198 E15.99563 ; infill
 G1 X103.982 Y112.198 E16.54410 ; infill
 G1 X103.889 Y111.640 E16.57032 ; infill
 G1 X92.158 Y111.640 E17.11430 ; infill
 G1 X92.161 Y111.083 E17.14016 ; infill
 G1 X103.796 Y111.083 E17.67965 ; infill
 G1 X103.703 Y110.525 E17.70587 ; infill
 G1 X92.165 Y110.525 E18.24087 ; infill
 G1 X92.168 Y109.967 E18.26673 ; infill
 G1 X103.609 Y109.967 E18.79724 ; infill
 G1 X103.516 Y109.410 E18.82346 ; infill
 G1 X92.172 Y109.410 E19.34948 ; infill
 G1 X92.175 Y108.852 E19.37534 ; infill
 G1 X103.423 Y108.852 E19.89687 ; infill
 G1 X103.330 Y108.294 E19.92309 ; infill
 G1 X92.179 Y108.294 E20.44013 ; infill
 G1 X92.183 Y107.737 E20.46599 ; infill
 G1 X103.236 Y107.737 E20.97854 ; infill
 G1 X103.143 Y107.179 E21.00476 ; infill
 G1 X92.186 Y107.179 E21.51282 ; infill
 G1 X92.190 Y106.621 E21.53868 ; infill
 G1 X103.050 Y106.621 E22.04225 ; infill
 G1 X102.957 Y106.064 E22.06847 ; infill
 G1 X92.193 Y106.064 E22.56755 ; infill
 G1 X92.197 Y105.506 E22.59341 ; infill
 G1 X102.863 Y105.506 E23.08800 ; infill
 G1 X102.770 Y104.949 E23.11422 ; infill
 G1 X92.200 Y104.949 E23.60432 ; infill
 G1 X92.204 Y104.391 E23.63018 ; infill
 G1 X102.677 Y104.391 E24.11579 ; infill
 G1 X102.584 Y103.833 E24.14201 ; infill
 G1 X92.208 Y103.833 E24.62313 ; infill
 G1 X92.211 Y103.276 E24.64899 ; infill
 G1 X102.490 Y103.276 E25.12563 ; infill
 G1 X102.397 Y102.718 E25.15184 ; infill
 G1 X92.215 Y102.718 E25.62399 ; infill
 G1 X92.218 Y102.160 E25.64985 ; infill
 G1 X102.304 Y102.160 E26.11750 ; infill
 G1 X102.211 Y101.603 E26.14372 ; infill
 G1 X92.222 Y101.603 E26.60688 ; infill
 G1 X92.225 Y101.045 E26.63274 ; infill
 G1 X102.117 Y101.045 E27.09141 ; infill
 G1 X102.024 Y100.487 E27.11763 ; infill
 G1 X92.229 Y100.487 E27.57181 ; infill
 G1 X92.233 Y99.930 E27.59767 ; infill
 G1 X101.931 Y99.930 E28.04737 ; infill
 G1 X101.838 Y99.372 E28.07358 ; infill
 G1 X92.236 Y99.372 E28.51879 ; infill
 G1 X92.240 Y98.814 E28.54464 ; infill
 G1 X101.744 Y98.814 E28.98536 ; infill
 G1 X101.651 Y98.257 E29.01158 ; infill
 G1 X92.243 Y98.257 E29.44780 ; infill
 G1 X92.247 Y97.699 E29.47366 ; infill
 G1 X101.558 Y97.699 E29.90539 ; infill
 G1 X101.465 Y97.141 E29.93161 ; infill
 G1 X92.251 Y97.141 E30.35885 ; infill
 G1 X92.254 Y96.584 E30.38471 ; infill
 G1 X101.371 Y96.584 E30.80747 ; infill
 G1 X101.278 Y96.026 E30.83368 ; infill
 G1 X92.258 Y96.026 E31.25195 ; infill
 G1 X92.261 Y95.468 E31.27781 ; infill
 G1 X101.185 Y95.468 E31.69158 ; infill
 G1 X101.092 Y94.911 E31.71780 ; infill
 G1 X92.265 Y94.911 E32.12708 ; infill
 G1 X92.268 Y94.353 E32.15294 ; infill
 G1 X100.998 Y94.353 E32.55774 ; infill
 G1 X100.905 Y93.796 E32.58395 ; infill
 G1 X92.272 Y93.796 E32.98426 ; infill
 G1 X92.276 Y93.238 E33.01012 ; infill
 G1 X100.812 Y93.238 E33.40593 ; infill
 G1 X100.719 Y92.680 E33.43215 ; infill
 G1 X92.279 Y92.680 E33.82348 ; infill
 G1 X92.283 Y92.123 E33.84933 ; infill
 G1 X100.625 Y92.123 E34.23617 ; infill
 G1 X100.532 Y91.565 E34.26239 ; infill
 G1 X92.286 Y91.565 E34.64473 ; infill
 G1 X92.290 Y91.007 E34.67059 ; infill
 G1 X100.439 Y91.007 E35.04845 ; infill
 G1 X100.345 Y90.450 E35.07466 ; infill
 G1 X92.293 Y90.450 E35.44803 ; infill
 G1 X92.297 Y89.892 E35.47389 ; infill
 G1 X100.252 Y89.892 E35.84276 ; infill
 G1 X100.159 Y89.334 E35.86898 ; infill
 G1 X92.301 Y89.334 E36.23337 ; infill
 G1 X92.304 Y88.777 E36.25922 ; infill
 G1 X100.066 Y88.777 E36.61912 ; infill
 G1 X99.972 Y88.219 E36.64534 ; infill
 G1 X92.308 Y88.219 E37.00074 ; infill
 G1 X92.311 Y87.661 E37.02660 ; infill
 G1 X99.879 Y87.661 E37.37752 ; infill
 G1 X99.786 Y87.104 E37.40373 ; infill
 G1 X92.315 Y87.104 E37.75016 ; infill
 G1 X92.318 Y86.546 E37.77602 ; infill
 G1 X99.693 Y86.546 E38.11796 ; infill
 G1 X99.599 Y85.988 E38.14417 ; infill
 G1 X92.322 Y85.988 E38.48162 ; infill
 G1 X92.326 Y85.431 E38.50748 ; infill
 G1 X99.506 Y85.431 E38.84043 ; infill
 G1 X99.413 Y84.873 E38.86665 ; infill
 G1 X92.329 Y84.873 E39.19512 ; infill
 G1 X92.333 Y84.315 E39.22098 ; infill
 G1 X99.320 Y84.315 E39.54495 ; infill
 G1 X99.226 Y83.758 E39.57117 ; infill
 G1 X92.336 Y83.758 E39.89066 ; infill
 G1 X92.340 Y83.200 E39.91652 ; infill
 G1 X99.133 Y83.200 E40.23151 ; infill
 G1 X99.040 Y82.643 E40.25773 ; infill
 G1 X92.343 Y82.643 E40.56824 ; infill
 G1 X92.347 Y82.085 E40.59409 ; infill
 G1 X98.947 Y82.085 E40.90011 ; infill
 G1 X98.853 Y81.527 E40.92633 ; infill
 G1 X92.351 Y81.527 E41.22786 ; infill
 G1 X92.354 Y80.970 E41.25371 ; infill
 G1 X98.760 Y80.970 E41.55075 ; infill
 G1 X98.667 Y80.412 E41.57697 ; infill
 G1 X92.358 Y80.412 E41.86952 ; infill
 G1 X92.361 Y79.854 E41.89538 ; infill
 G1 X98.574 Y79.854 E42.18343 ; infill
 G1 X98.480 Y79.297 E42.20965 ; infill
 G1 X92.365 Y79.297 E42.49322 ; infill
 G1 X92.368 Y78.739 E42.51908 ; infill
 G1 X98.387 Y78.739 E42.79815 ; infill
 G1 X98.294 Y78.181 E42.82437 ; infill
 G1 X92.372 Y78.181 E43.09896 ; infill
 G1 X92.376 Y77.624 E43.12482 ; infill
 G1 X98.201 Y77.624 E43.39492 ; infill
 G1 X98.107 Y77.066 E43.42113 ; infill
 G1 X92.379 Y77.066 E43.68674 ; infill
 G1 X92.383 Y76.508 E43.71260 ; infill
 G1 X98.014 Y76.508 E43.97372 ; infill
 G1 X97.921 Y75.951 E43.99993 ; infill
 G1 X92.386 Y75.951 E44.25656 ; infill
 G1 X92.390 Y75.393 E44.28242 ; infill
 G1 X97.828 Y75.393 E44.53456 ; infill
 G1 X97.734 Y74.835 E44.56078 ; infill
 G1 X92.393 Y74.835 E44.80842 ; infill
 G1 X92.397 Y74.278 E44.83428 ; infill
 G1 X97.641 Y74.278 E45.07744 ; infill
 G1 X97.548 Y73.720 E45.10366 ; infill
 G1 X92.401 Y73.720 E45.34233 ; infill
 G1 X92.404 Y73.162 E45.36819 ; infill
 G1 X97.455 Y73.162 E45.60236 ; infill
 G1 X97.361 Y72.605 E45.62858 ; infill
 G1 X92.408 Y72.605 E45.85827 ; infill
 G1 X92.411 Y72.047 E45.88413 ; infill
 G1 X97.268 Y72.047 E46.10933 ; infill
 G1 X97.175 Y71.490 E46.13554 ; infill
 G1 X92.415 Y71.490 E46.35625 ; infill
 G1 X94.621 Y70.932 F12000.000 ; move to first infill point
 G1 X92.419 Y70.932 E46.45840 F7200.000 ; infill
 G1 X92.422 Y70.374 E46.48425 ; infill
 G1 X94.621 Y70.374 E46.58623 ; infill
 G1 X94.621 Y69.817 E46.61209 ; infill
 G1 X92.426 Y69.817 E46.71390 ; infill
 G1 X92.429 Y69.259 E46.73976 ; infill
 G1 X94.621 Y69.259 E46.84140 ; infill
 G1 X94.621 Y68.701 E46.86726 ; infill
 G1 X92.433 Y68.701 E46.96874 ; infill
 G1 X92.436 Y68.144 E46.99459 ; infill
 G1 X94.621 Y68.144 E47.09591 ; infill
 G1 X94.621 Y67.586 E47.12176 ; infill
 G1 X92.440 Y67.586 E47.22291 ; infill
 G1 X92.444 Y67.028 E47.24877 ; infill
 G1 X94.621 Y67.028 E47.34975 ; infill
 G1 X94.621 Y66.471 E47.37561 ; infill
 G1 X92.447 Y66.471 E47.47642 ; infill
 G1 X92.451 Y65.913 E47.50228 ; infill
 G1 X94.621 Y65.913 E47.60293 ; infill
 G1 F9600
 G1 X92.451 Y65.913 E47.08741 ; wipe and retract
 G1 F9600
 G1 X92.447 Y66.471 E46.95496 ; wipe and retract
 G1 F9600
 G1 X94.621 Y66.471 E46.43859 ; wipe and retract
 G1 F9600
 G1 X94.621 Y67.028 E46.30615 ; wipe and retract
 G1 F9600
 G1 X92.444 Y67.028 E45.78893 ; wipe and retract
 G1 F9600
 G1 X92.440 Y67.586 E45.65649 ; wipe and retract
 G1 F9600
 G1 X94.621 Y67.586 E45.13842 ; wipe and retract
 G1 F9600
 G1 X94.621 Y68.144 E45.00598 ; wipe and retract
 G1 F9600
 G1 X92.436 Y68.144 E44.48706 ; wipe and retract
 G1 F9600
 G1 X92.433 Y68.701 E44.35461 ; wipe and retract
 G1 F9600
 G1 X94.621 Y68.701 E43.83484 ; wipe and retract
 G1 F9600
 G1 X94.621 Y69.259 E43.70240 ; wipe and retract
 G1 F9600
 G1 X92.429 Y69.259 E43.18178 ; wipe and retract
 G1 F9600
 G1 X92.426 Y69.817 E43.04934 ; wipe and retract
 G1 F9600
 G1 X93.253 Y69.817 E42.85293 ; wipe and retract
 G1 E42.60293 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z3.600 F12000.000 ; lift Z
 G1 X96.608 Y62.290 F12000.000 ; move to first perimeter point
 G1 Z2.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X90.487 Y62.290 E5.18174 F7200.000 ; perimeter
 G1 X90.507 Y59.215 E5.27306 ; perimeter
 G1 X96.608 Y59.215 E5.45421 ; perimeter
 G1 X96.608 Y62.230 E5.54375 ; perimeter
 G1 X96.262 Y62.090 F12000.000 ; move inwards before travel
 G1 X96.251 Y61.933 F12000.000 ; move to first perimeter point
 G1 X90.846 Y61.933 E5.70421 F7200.000 ; perimeter
 G1 X90.862 Y59.572 E5.77433 ; perimeter
 G1 X96.251 Y59.572 E5.93435 ; perimeter
 G1 X96.251 Y61.873 E6.00268 ; perimeter
 G1 X95.894 Y61.576 F12000.000 ; move to first perimeter point
 G1 X91.206 Y61.576 E6.14187 F7200.000 ; perimeter
 G1 X91.216 Y59.929 E6.19078 ; perimeter
 G1 X95.894 Y59.929 E6.32966 ; perimeter
 G1 X95.894 Y61.516 E6.37679 ; perimeter
 G1 X95.537 Y61.219 F12000.000 ; move to first perimeter point
 G1 X91.565 Y61.219 E6.49471 F7200.000 ; perimeter
 G1 X91.571 Y60.286 E6.52241 ; perimeter
 G1 X95.537 Y60.286 E6.64016 ; perimeter
 G1 X95.537 Y61.159 E6.66608 ; perimeter
 G1 X95.180 Y60.862 F12000.000 ; move to first perimeter point
 G1 X91.925 Y60.862 E6.76273 F7200.000 ; perimeter
 G1 X91.926 Y60.643 E6.76923 ; perimeter
 G1 X95.180 Y60.643 E6.86584 ; perimeter
 G1 X95.180 Y60.802 E6.87055 ; perimeter
 G1 F9600
 G1 X91.925 Y60.862 E6.09732 ; wipe and retract
 G1 F9600
 G1 X91.926 Y60.643 E6.04534 ; wipe and retract
 G1 F9600
 G1 X95.180 Y60.643 E5.27256 ; wipe and retract
 G1 F9600
 G1 X95.180 Y60.802 E5.23483 ; wipe and retract
 G1 E1.87055 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z3.600 F12000.000 ; lift Z
 M106 S226.95 ; enable fan
 G1 X96.608 Y69.215 F12000.000 ; move to first perimeter point
 G1 Z2.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.811 Y69.215 E5.06541 F7200.000 ; perimeter
 G1 X107.942 Y123.815 E6.70907 ; perimeter
 G1 X95.608 Y123.815 E7.07527 ; perimeter
 G1 X95.608 Y132.215 E7.32468 ; perimeter
 G1 X109.346 Y132.215 E7.73258 ; perimeter
 G1 X109.992 Y136.074 E7.84876 ; perimeter
 G1 X109.992 Y137.923 E7.90365 ; perimeter
 G1 X109.148 Y139.531 E7.95757 ; perimeter
 G1 X107.653 Y140.562 E8.01149 ; perimeter
 G1 X105.814 Y140.785 E8.06651 ; perimeter
 G1 X93.363 Y140.785 E8.43620 ; perimeter
 G1 X91.653 Y140.137 E8.49050 ; perimeter
 G1 X90.449 Y138.778 E8.54441 ; perimeter
 G1 X90.008 Y136.991 E8.59905 ; perimeter
 G1 X90.477 Y63.884 E10.76973 ; perimeter
 G1 X96.608 Y63.884 E10.95178 ; perimeter
 G1 X96.608 Y69.155 E11.10826 ; perimeter
 G1 X96.608 Y69.615 F12000.000 ; move inwards before travel
 G1 X96.251 Y69.572 F12000.000 ; move to first perimeter point
 G1 X98.509 Y69.572 E11.17530 F7200.000 ; perimeter
 G1 X107.520 Y123.458 E12.79745 ; perimeter
 G1 X95.251 Y123.458 E13.16174 ; perimeter
 G1 X95.251 Y132.572 E13.43235 ; perimeter
 G1 X98.451 Y132.572 E13.52736 ; perimeter
 G1 X98.451 Y136.372 E13.64019 ; perimeter
 G1 X105.165 Y136.372 E13.83954 ; perimeter
 G1 X105.165 Y132.572 E13.95237 ; perimeter
 G1 X109.044 Y132.572 E14.06754 ; perimeter
 G1 X109.635 Y136.104 E14.17386 ; perimeter
 G1 X109.635 Y137.835 E14.22526 ; perimeter
 G1 X108.873 Y139.287 E14.27395 ; perimeter
 G1 X107.523 Y140.218 E14.32264 ; perimeter
 G1 X105.792 Y140.428 E14.37440 ; perimeter
 G1 X93.428 Y140.428 E14.74151 ; perimeter
 G1 X91.862 Y139.834 E14.79125 ; perimeter
 G1 X90.774 Y138.607 E14.83994 ; perimeter
 G1 X90.366 Y136.949 E14.89065 ; perimeter
 G1 X90.832 Y64.241 E17.04947 ; perimeter
 G1 X96.251 Y64.241 E17.21038 ; perimeter
 G1 X96.251 Y69.512 E17.36686 ; perimeter
 G1 X95.894 Y69.929 F12000.000 ; move to first perimeter point
 G1 X98.206 Y69.929 E17.43552 F7200.000 ; perimeter
 G1 X107.098 Y123.100 E19.03618 ; perimeter
 G1 X94.894 Y123.100 E19.39854 ; perimeter
 G1 X94.894 Y132.929 E19.69036 ; perimeter
 G1 X98.094 Y132.929 E19.78537 ; perimeter
 G1 X98.094 Y136.729 E19.89820 ; perimeter
 G1 X105.522 Y136.729 E20.11875 ; perimeter
 G1 X105.522 Y132.929 E20.23158 ; perimeter
 G1 X108.742 Y132.929 E20.32717 ; perimeter
 G1 X109.278 Y136.133 E20.42364 ; perimeter
 G1 X109.278 Y137.747 E20.47154 ; perimeter
 G1 X108.597 Y139.043 E20.51501 ; perimeter
 G1 X107.393 Y139.874 E20.55847 ; perimeter
 G1 X105.771 Y140.071 E20.60698 ; perimeter
 G1 X93.493 Y140.071 E20.97151 ; perimeter
 G1 X92.071 Y139.532 E21.01669 ; perimeter
 G1 X91.100 Y138.436 E21.06015 ; perimeter
 G1 X90.723 Y136.906 E21.10693 ; perimeter
 G1 X91.186 Y64.598 E23.25389 ; perimeter
 G1 X95.894 Y64.598 E23.39366 ; perimeter
 G1 X95.894 Y69.869 E23.55015 ; perimeter
 G1 X95.537 Y70.286 F12000.000 ; move to first perimeter point
 G1 X97.904 Y70.286 E23.62043 F7200.000 ; perimeter
 G1 X106.677 Y122.743 E25.19959 ; perimeter
 G1 X94.537 Y122.743 E25.56004 ; perimeter
 G1 X94.537 Y133.286 E25.87305 ; perimeter
 G1 X97.737 Y133.286 E25.96807 ; perimeter
 G1 X97.737 Y137.086 E26.08089 ; perimeter
 G1 X105.879 Y137.086 E26.32265 ; perimeter
 G1 X105.879 Y133.286 E26.43548 ; perimeter
 G1 X108.440 Y133.286 E26.51150 ; perimeter
 G1 X108.921 Y136.163 E26.59811 ; perimeter
 G1 X108.921 Y137.659 E26.64251 ; perimeter
 G1 X108.322 Y138.799 E26.68075 ; perimeter
 G1 X107.262 Y139.530 E26.71899 ; perimeter
 G1 X105.749 Y139.714 E26.76425 ; perimeter
 G1 X93.559 Y139.714 E27.12619 ; perimeter
 G1 X92.280 Y139.229 E27.16681 ; perimeter
 G1 X91.426 Y138.265 E27.20505 ; perimeter
 G1 X91.080 Y136.864 E27.24789 ; perimeter
 G1 X91.541 Y64.955 E29.38300 ; perimeter
 G1 X95.537 Y64.955 E29.50163 ; perimeter
 G1 X95.537 Y70.226 E29.65812 ; perimeter
 G1 X95.180 Y70.643 F12000.000 ; move to first perimeter point
 G1 X97.602 Y70.643 E29.73003 F7200.000 ; perimeter
 G1 X106.255 Y122.386 E31.28769 ; perimeter
 G1 X94.180 Y122.386 E31.64621 ; perimeter
 G1 X94.180 Y133.643 E31.98044 ; perimeter
 G1 X97.380 Y133.643 E32.07545 ; perimeter
 G1 X97.380 Y137.443 E32.18827 ; perimeter
 G1 X106.236 Y137.443 E32.45124 ; perimeter
 G1 X106.236 Y133.643 E32.56407 ; perimeter
 G1 X108.137 Y133.643 E32.62050 ; perimeter
 G1 X108.564 Y136.193 E32.69726 ; perimeter
 G1 X108.564 Y137.571 E32.73817 ; perimeter
 G1 X108.047 Y138.555 E32.77118 ; perimeter
 G1 X107.132 Y139.187 E32.80419 ; perimeter
 G1 X105.728 Y139.357 E32.84620 ; perimeter
 G1 X93.624 Y139.357 E33.20555 ; perimeter
 G1 X92.488 Y138.926 E33.24162 ; perimeter
 G1 X91.751 Y138.094 E33.27463 ; perimeter
 G1 X91.438 Y136.822 E33.31353 ; perimeter
 G1 X91.896 Y65.313 E35.43679 ; perimeter
 G1 X95.180 Y65.313 E35.53429 ; perimeter
 G1 X95.180 Y70.583 E35.69077 ; perimeter
 G1 X94.823 Y71.000 F12000.000 ; move to first perimeter point
 G1 X97.299 Y71.000 E35.76431 F7200.000 ; perimeter
 G1 X105.833 Y122.029 E37.30047 ; perimeter
 G1 X93.823 Y122.029 E37.65707 ; perimeter
 G1 X93.823 Y134.000 E38.01250 ; perimeter
 G1 X97.023 Y134.000 E38.10751 ; perimeter
 G1 X97.023 Y137.800 E38.22034 ; perimeter
 G1 X106.593 Y137.800 E38.50451 ; perimeter
 G1 X106.593 Y134.000 E38.61734 ; perimeter
 G1 X107.835 Y134.000 E38.65419 ; perimeter
 G1 X108.207 Y136.222 E38.72109 ; perimeter
 G1 X108.207 Y137.482 E38.75851 ; perimeter
 G1 X107.772 Y138.311 E38.78630 ; perimeter
 G1 X107.001 Y138.843 E38.81408 ; perimeter
 G1 X105.706 Y139.000 E38.85283 ; perimeter
 G1 X93.690 Y139.000 E39.20960 ; perimeter
 G1 X92.697 Y138.624 E39.24112 ; perimeter
 G1 X92.077 Y137.923 E39.26890 ; perimeter
 G1 X91.795 Y136.780 E39.30387 ; perimeter
 G1 X92.251 Y65.670 E41.41526 ; perimeter
 G1 X94.823 Y65.670 E41.49163 ; perimeter
 G1 X94.823 Y70.940 E41.64811 ; perimeter
 G1 F9600
 G1 X97.299 Y71.000 E41.05971 ; wipe and retract
 G1 F9600
 G1 X100.190 Y88.283 E36.89811 ; wipe and retract
 G1 E36.64811 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z3.800 F12000.000 ; lift Z
 G1 X98.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z2.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X104.808 Y133.015 E5.17815 F7200.000 ; perimeter
 G1 X104.808 Y136.015 E5.26722 ; perimeter
 G1 X98.808 Y136.015 E5.44537 ; perimeter
 G1 X98.808 Y133.075 E5.53266 ; perimeter
 G1 X98.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X104.987 Y132.615 E5.93285 F1800.000 ; infill
 G1 F9600
 G1 X98.630 Y132.615 E4.42305 ; wipe and retract
 G1 E0.93285 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z3.800 F12000.000 ; lift Z
 G1 X103.671 Y138.799 F12000.000 ; move to first infill point
 G1 Z2.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.671 Y138.001 E5.03693 F7200.000 ; infill
 G1 X100.709 Y138.799 E5.17903 ; infill
 G1 X100.453 Y138.001 E5.21782 ; infill
 G1 X92.530 Y138.046 E5.58483 ; infill
 G1 X92.530 Y124.789 E6.19892 ; infill
 G1 X93.317 Y125.115 E6.23838 ; infill
 G1 X93.454 Y125.696 E6.26607 ; infill
 G1 X93.404 Y124.916 F12000.000 ; move to first infill point
 G1 X93.404 Y66.526 E9.03306 F7200.000 ; infill
 G1 X92.834 Y66.526 E9.06007 ; infill
 G1 X92.834 Y124.689 E11.81631 ; infill
 G1 X92.264 Y124.453 E11.84553 ; infill
 G1 X92.264 Y120.978 E12.01022 ; infill
 G1 X93.973 Y121.828 F12000.000 ; move to first infill point
 G1 X93.973 Y66.526 E14.63086 F7200.000 ; infill
 G1 X94.543 Y71.201 F12000.000 ; move to first infill point
 G1 X94.543 Y121.828 E17.02996 F7200.000 ; infill
 G1 X95.113 Y121.828 E17.05696 ; infill
 G1 X95.113 Y71.201 E19.45606 ; infill
 G1 X95.683 Y71.201 E19.48306 ; infill
 G1 X95.683 Y121.828 E21.88216 ; infill
 G1 X96.253 Y121.828 E21.90917 ; infill
 G1 X96.253 Y71.201 E24.30826 ; infill
 G1 X96.823 Y71.201 E24.33527 ; infill
 G1 X96.823 Y121.828 E26.73436 ; infill
 G1 X97.393 Y121.828 E26.76137 ; infill
 G1 X97.393 Y73.626 E29.04555 ; infill
 G1 X97.963 Y77.034 F12000.000 ; move to first infill point
 G1 X97.963 Y121.828 E31.16824 F7200.000 ; infill
 G1 X98.533 Y121.828 E31.19525 ; infill
 G1 X98.533 Y80.442 E33.15645 ; infill
 G1 X99.103 Y83.850 F12000.000 ; move to first infill point
 G1 X99.103 Y121.828 E34.95614 F7200.000 ; infill
 G1 X99.673 Y121.828 E34.98315 ; infill
 G1 X99.673 Y87.258 E36.62135 ; infill
 G1 X100.242 Y90.666 F12000.000 ; move to first infill point
 G1 X100.242 Y121.828 E38.09806 F7200.000 ; infill
 G1 X100.812 Y121.828 E38.12506 ; infill
 G1 X100.812 Y94.074 E39.44027 ; infill
 G1 X101.382 Y97.482 F12000.000 ; move to first infill point
 G1 X101.382 Y121.828 E40.59398 F7200.000 ; infill
 G1 X101.952 Y121.828 E40.62099 ; infill
 G1 X101.952 Y100.890 E41.61321 ; infill
 G1 X102.522 Y104.298 F12000.000 ; move to first infill point
 G1 X102.522 Y121.828 E42.44392 F7200.000 ; infill
 G1 X103.092 Y121.828 E42.47093 ; infill
 G1 X103.092 Y107.706 E43.14015 ; infill
 G1 X103.662 Y111.114 F12000.000 ; move to first infill point
 G1 X103.662 Y121.828 E43.64788 F7200.000 ; infill
 G1 X104.232 Y121.828 E43.67489 ; infill
 G1 X104.232 Y114.522 E44.02111 ; infill
 G1 X104.802 Y117.930 F12000.000 ; move to first infill point
 G1 X104.802 Y121.828 E44.20585 F7200.000 ; infill
 G1 X105.372 Y121.337 E44.24147 ; infill
 G1 X105.372 Y121.818 E44.26425 ; infill
 G1 X93.305 Y66.323 F12000.000 ; move to first infill point
 G1 X93.087 Y65.891 E44.28668 F7200.000 ; infill
 G1 F9600
 G1 X93.305 Y66.323 E44.17166 ; wipe and retract
 G1 E39.28668 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z3.800 F12000.000 ; lift Z
 G1 X96.608 Y62.145 F12000.000 ; move to first perimeter point
 G1 Z2.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X90.488 Y62.145 E5.18171 F7200.000 ; perimeter
 G1 X90.507 Y59.215 E5.26872 ; perimeter
 G1 X96.608 Y59.215 E5.44988 ; perimeter
 G1 X96.608 Y62.085 E5.53510 ; perimeter
 G1 X96.262 Y61.945 F12000.000 ; move inwards before travel
 G1 X96.251 Y61.788 F12000.000 ; move to first perimeter point
 G1 X90.847 Y61.788 E5.69554 F7200.000 ; perimeter
 G1 X90.862 Y59.572 E5.76135 ; perimeter
 G1 X96.251 Y59.572 E5.92137 ; perimeter
 G1 X96.251 Y61.728 E5.98539 ; perimeter
 G1 X95.894 Y61.431 F12000.000 ; move to first perimeter point
 G1 X91.207 Y61.431 E6.12455 F7200.000 ; perimeter
 G1 X91.216 Y59.929 E6.16915 ; perimeter
 G1 X95.894 Y59.929 E6.30804 ; perimeter
 G1 X95.894 Y61.371 E6.35085 ; perimeter
 G1 X95.537 Y61.074 F12000.000 ; move to first perimeter point
 G1 X91.566 Y61.074 E6.46875 F7200.000 ; perimeter
 G1 X91.571 Y60.286 E6.49214 ; perimeter
 G1 X95.537 Y60.286 E6.60989 ; perimeter
 G1 X95.537 Y61.014 E6.63150 ; perimeter
 G1 X95.358 Y60.680 F12000.000 ; move to first infill point
 G1 X91.747 Y60.680 E6.85883 F1800.000 ; infill
 M106 S211.65 ; enable fan
 G1 F9600
 G1 X95.358 Y60.680 E6.00119 ; wipe and retract
 G1 E1.85883 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z3.800 F12000.000 ; lift Z
 G1 X96.608 Y69.215 F12000.000 ; move to first perimeter point
 G1 Z3.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.811 Y69.215 E5.06541 F7200.000 ; perimeter
 G1 X107.942 Y123.815 E6.70907 ; perimeter
 G1 X95.608 Y123.815 E7.07527 ; perimeter
 G1 X95.608 Y132.215 E7.32468 ; perimeter
 G1 X109.346 Y132.215 E7.73258 ; perimeter
 G1 X109.992 Y136.074 E7.84876 ; perimeter
 G1 X109.992 Y137.923 E7.90365 ; perimeter
 G1 X109.148 Y139.531 E7.95757 ; perimeter
 G1 X107.653 Y140.562 E8.01149 ; perimeter
 G1 X105.814 Y140.785 E8.06651 ; perimeter
 G1 X93.363 Y140.785 E8.43620 ; perimeter
 G1 X91.653 Y140.137 E8.49050 ; perimeter
 G1 X90.449 Y138.778 E8.54441 ; perimeter
 G1 X90.008 Y136.991 E8.59905 ; perimeter
 G1 X90.477 Y63.938 E10.76814 ; perimeter
 G1 X96.608 Y63.938 E10.95020 ; perimeter
 G1 X96.608 Y69.155 E11.10509 ; perimeter
 G1 X96.608 Y69.615 F12000.000 ; move inwards before travel
 G1 X96.251 Y69.572 F12000.000 ; move to first perimeter point
 G1 X98.509 Y69.572 E11.17212 F7200.000 ; perimeter
 G1 X107.520 Y123.458 E12.79428 ; perimeter
 G1 X95.251 Y123.458 E13.15856 ; perimeter
 G1 X95.251 Y132.572 E13.42918 ; perimeter
 G1 X98.451 Y132.572 E13.52419 ; perimeter
 G1 X98.451 Y136.372 E13.63701 ; perimeter
 G1 X105.165 Y136.372 E13.83637 ; perimeter
 G1 X105.165 Y132.572 E13.94919 ; perimeter
 G1 X109.044 Y132.572 E14.06436 ; perimeter
 G1 X109.635 Y136.104 E14.17069 ; perimeter
 G1 X109.635 Y137.835 E14.22208 ; perimeter
 G1 X108.873 Y139.287 E14.27077 ; perimeter
 G1 X107.523 Y140.218 E14.31947 ; perimeter
 G1 X105.792 Y140.428 E14.37123 ; perimeter
 G1 X93.428 Y140.428 E14.73834 ; perimeter
 G1 X91.862 Y139.834 E14.78808 ; perimeter
 G1 X90.774 Y138.607 E14.83677 ; perimeter
 G1 X90.366 Y136.949 E14.88747 ; perimeter
 G1 X90.831 Y64.295 E17.04471 ; perimeter
 G1 X96.251 Y64.295 E17.20562 ; perimeter
 G1 X96.251 Y69.512 E17.36052 ; perimeter
 G1 X95.894 Y69.929 F12000.000 ; move to first perimeter point
 G1 X98.206 Y69.929 E17.42918 F7200.000 ; perimeter
 G1 X107.098 Y123.100 E19.02984 ; perimeter
 G1 X94.894 Y123.100 E19.39220 ; perimeter
 G1 X94.894 Y132.929 E19.68401 ; perimeter
 G1 X98.094 Y132.929 E19.77903 ; perimeter
 G1 X98.094 Y136.729 E19.89185 ; perimeter
 G1 X105.522 Y136.729 E20.11241 ; perimeter
 G1 X105.522 Y132.929 E20.22524 ; perimeter
 G1 X108.742 Y132.929 E20.32083 ; perimeter
 G1 X109.278 Y136.133 E20.41730 ; perimeter
 G1 X109.278 Y137.747 E20.46520 ; perimeter
 G1 X108.597 Y139.043 E20.50866 ; perimeter
 G1 X107.393 Y139.874 E20.55213 ; perimeter
 G1 X105.771 Y140.071 E20.60064 ; perimeter
 G1 X93.493 Y140.071 E20.96516 ; perimeter
 G1 X92.071 Y139.532 E21.01035 ; perimeter
 G1 X91.100 Y138.436 E21.05381 ; perimeter
 G1 X90.723 Y136.906 E21.10058 ; perimeter
 G1 X91.186 Y64.652 E23.24595 ; perimeter
 G1 X95.894 Y64.652 E23.38574 ; perimeter
 G1 X95.894 Y69.869 E23.54063 ; perimeter
 G1 X95.537 Y70.286 F12000.000 ; move to first perimeter point
 G1 X97.904 Y70.286 E23.61091 F7200.000 ; perimeter
 G1 X106.677 Y122.743 E25.19008 ; perimeter
 G1 X94.537 Y122.743 E25.55052 ; perimeter
 G1 X94.537 Y133.286 E25.86354 ; perimeter
 G1 X97.737 Y133.286 E25.95855 ; perimeter
 G1 X97.737 Y137.086 E26.07138 ; perimeter
 G1 X105.879 Y137.086 E26.31314 ; perimeter
 G1 X105.879 Y133.286 E26.42596 ; perimeter
 G1 X108.440 Y133.286 E26.50198 ; perimeter
 G1 X108.921 Y136.163 E26.58859 ; perimeter
 G1 X108.921 Y137.659 E26.63300 ; perimeter
 G1 X108.322 Y138.799 E26.67123 ; perimeter
 G1 X107.262 Y139.530 E26.70947 ; perimeter
 G1 X105.749 Y139.714 E26.75473 ; perimeter
 G1 X93.559 Y139.714 E27.11667 ; perimeter
 G1 X92.280 Y139.229 E27.15730 ; perimeter
 G1 X91.426 Y138.265 E27.19553 ; perimeter
 G1 X91.080 Y136.864 E27.23837 ; perimeter
 G1 X91.541 Y65.009 E29.37189 ; perimeter
 G1 X95.537 Y65.009 E29.49053 ; perimeter
 G1 X95.537 Y70.226 E29.64543 ; perimeter
 G1 X95.180 Y70.643 F12000.000 ; move to first perimeter point
 G1 X97.602 Y70.643 E29.71734 F7200.000 ; perimeter
 G1 X106.255 Y122.386 E31.27500 ; perimeter
 G1 X94.180 Y122.386 E31.63352 ; perimeter
 G1 X94.180 Y133.643 E31.96775 ; perimeter
 G1 X97.380 Y133.643 E32.06276 ; perimeter
 G1 X97.380 Y137.443 E32.17558 ; perimeter
 G1 X106.236 Y137.443 E32.43855 ; perimeter
 G1 X106.236 Y133.643 E32.55138 ; perimeter
 G1 X108.137 Y133.643 E32.60781 ; perimeter
 G1 X108.564 Y136.193 E32.68456 ; perimeter
 G1 X108.564 Y137.571 E32.72548 ; perimeter
 G1 X108.047 Y138.555 E32.75849 ; perimeter
 G1 X107.132 Y139.187 E32.79150 ; perimeter
 G1 X105.728 Y139.357 E32.83351 ; perimeter
 G1 X93.624 Y139.357 E33.19286 ; perimeter
 G1 X92.488 Y138.926 E33.22893 ; perimeter
 G1 X91.751 Y138.094 E33.26194 ; perimeter
 G1 X91.438 Y136.822 E33.30084 ; perimeter
 G1 X91.896 Y65.366 E35.42251 ; perimeter
 G1 X95.180 Y65.366 E35.52001 ; perimeter
 G1 X95.180 Y70.583 E35.67491 ; perimeter
 G1 X94.823 Y71.000 F12000.000 ; move to first perimeter point
 G1 X97.299 Y71.000 E35.74845 F7200.000 ; perimeter
 G1 X105.833 Y122.029 E37.28461 ; perimeter
 G1 X93.823 Y122.029 E37.64121 ; perimeter
 G1 X93.823 Y134.000 E37.99664 ; perimeter
 G1 X97.023 Y134.000 E38.09165 ; perimeter
 G1 X97.023 Y137.800 E38.20448 ; perimeter
 G1 X106.593 Y137.800 E38.48865 ; perimeter
 G1 X106.593 Y134.000 E38.60147 ; perimeter
 G1 X107.835 Y134.000 E38.63833 ; perimeter
 G1 X108.207 Y136.222 E38.70523 ; perimeter
 G1 X108.207 Y137.482 E38.74265 ; perimeter
 G1 X107.772 Y138.311 E38.77043 ; perimeter
 G1 X107.001 Y138.843 E38.79822 ; perimeter
 G1 X105.706 Y139.000 E38.83697 ; perimeter
 G1 X93.690 Y139.000 E39.19374 ; perimeter
 G1 X92.697 Y138.624 E39.22525 ; perimeter
 G1 X92.077 Y137.923 E39.25304 ; perimeter
 G1 X91.795 Y136.780 E39.28800 ; perimeter
 G1 X92.251 Y65.723 E41.39781 ; perimeter
 G1 X94.823 Y65.723 E41.47418 ; perimeter
 G1 X94.823 Y70.940 E41.62907 ; perimeter
 G1 F9600
 G1 X97.299 Y71.000 E41.04068 ; wipe and retract
 G1 F9600
 G1 X100.190 Y88.283 E36.87907 ; wipe and retract
 G1 E36.62907 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.000 F12000.000 ; lift Z
 G1 X98.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z3.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X104.808 Y133.015 E5.17815 F7200.000 ; perimeter
 G1 X104.808 Y136.015 E5.26722 ; perimeter
 G1 X98.808 Y136.015 E5.44537 ; perimeter
 G1 X98.808 Y133.075 E5.53266 ; perimeter
 G1 X98.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X104.987 Y132.615 E5.93285 F1800.000 ; infill
 G1 X106.795 Y135.324 F12000.000 ; move to first infill point
 G1 X107.850 Y135.324 E5.98171 F7200.000 ; infill
 G1 F9600
 G1 X106.795 Y135.324 E5.73116 ; wipe and retract
 G1 E0.98171 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.000 F12000.000 ; lift Z
 G1 X96.821 Y135.324 F12000.000 ; move to first infill point
 G1 Z3.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X92.017 Y135.324 E5.22256 F7200.000 ; infill
 G1 X92.017 Y134.767 E5.24836 ; infill
 G1 X93.621 Y134.034 E5.33008 ; infill
 G1 X93.621 Y124.183 E5.78640 ; infill
 G1 X92.077 Y124.183 E5.85792 ; infill
 G1 X92.081 Y123.588 E5.88545 ; infill
 G1 X93.118 Y123.182 E5.93706 ; infill
 G1 X93.375 Y122.951 F12000.000 ; move to first infill point
 G1 X93.661 Y122.951 E5.94560 F7200.000 ; infill
 G1 X93.661 Y122.592 E5.95631 ; infill
 G1 X92.507 Y122.592 E5.99075 ; infill
 G1 X92.069 Y122.233 E6.00767 ; infill
 G1 X93.661 Y122.233 E6.05520 ; infill
 G1 X93.661 Y121.874 E6.06592 ; infill
 G1 X92.069 Y121.874 E6.11345 ; infill
 G1 X92.069 Y121.515 E6.12416 ; infill
 G1 X105.582 Y121.515 E6.52747 ; infill
 G1 X105.522 Y121.156 E6.53833 ; infill
 G1 X92.069 Y121.156 E6.93984 ; infill
 G1 X92.069 Y120.797 E6.95055 ; infill
 G1 X105.462 Y120.797 E7.35027 ; infill
 G1 X105.402 Y120.438 E7.36114 ; infill
 G1 X92.069 Y120.438 E7.75907 ; infill
 G1 X92.069 Y120.079 E7.76978 ; infill
 G1 X105.342 Y120.079 E8.16592 ; infill
 G1 X105.282 Y119.720 E8.17678 ; infill
 G1 X92.069 Y119.720 E8.57112 ; infill
 G1 X92.069 Y119.361 E8.58184 ; infill
 G1 X105.222 Y119.361 E8.97439 ; infill
 G1 X105.162 Y119.002 E8.98525 ; infill
 G1 X92.070 Y119.002 E9.37597 ; infill
 G1 X92.073 Y118.643 E9.38668 ; infill
 G1 X105.102 Y118.643 E9.77553 ; infill
 G1 X105.042 Y118.284 E9.78639 ; infill
 G1 X92.075 Y118.284 E10.17339 ; infill
 G1 X92.077 Y117.926 E10.18410 ; infill
 G1 X104.982 Y117.926 E10.56923 ; infill
 G1 X104.922 Y117.567 E10.58009 ; infill
 G1 X92.080 Y117.567 E10.96337 ; infill
 G1 X92.082 Y117.208 E10.97408 ; infill
 G1 X104.862 Y117.208 E11.35549 ; infill
 G1 X104.802 Y116.849 E11.36635 ; infill
 G1 X92.084 Y116.849 E11.74591 ; infill
 G1 X92.086 Y116.490 E11.75662 ; infill
 G1 X104.742 Y116.490 E12.13431 ; infill
 G1 X104.682 Y116.131 E12.14517 ; infill
 G1 X92.089 Y116.131 E12.52101 ; infill
 G1 X92.091 Y115.772 E12.53172 ; infill
 G1 X104.622 Y115.772 E12.90569 ; infill
 G1 X104.561 Y115.413 E12.91655 ; infill
 G1 X92.093 Y115.413 E13.28866 ; infill
 G1 X92.096 Y115.054 E13.29938 ; infill
 G1 X104.501 Y115.054 E13.66963 ; infill
 G1 X104.441 Y114.695 E13.68049 ; infill
 G1 X92.098 Y114.695 E14.04888 ; infill
 G1 X92.100 Y114.336 E14.05960 ; infill
 G1 X104.381 Y114.336 E14.42613 ; infill
 G1 X104.321 Y113.977 E14.43699 ; infill
 G1 X92.103 Y113.977 E14.80166 ; infill
 G1 X92.105 Y113.618 E14.81237 ; infill
 G1 X104.261 Y113.618 E15.17519 ; infill
 G1 X104.201 Y113.259 E15.18605 ; infill
 G1 X92.107 Y113.259 E15.54700 ; infill
 G1 X92.109 Y112.900 E15.55771 ; infill
 G1 X104.141 Y112.900 E15.91680 ; infill
 G1 X104.081 Y112.542 E15.92766 ; infill
 G1 X92.112 Y112.542 E16.28490 ; infill
 G1 X92.114 Y112.183 E16.29561 ; infill
 G1 X104.021 Y112.183 E16.65098 ; infill
 G1 X103.961 Y111.824 E16.66184 ; infill
 G1 X92.116 Y111.824 E17.01535 ; infill
 G1 X92.119 Y111.465 E17.02607 ; infill
 G1 X103.901 Y111.465 E17.37772 ; infill
 G1 X103.841 Y111.106 E17.38858 ; infill
 G1 X92.121 Y111.106 E17.73837 ; infill
 G1 X92.123 Y110.747 E17.74908 ; infill
 G1 X103.781 Y110.747 E18.09702 ; infill
 G1 X103.721 Y110.388 E18.10788 ; infill
 G1 X92.126 Y110.388 E18.45395 ; infill
 G1 X92.128 Y110.029 E18.46466 ; infill
 G1 X103.661 Y110.029 E18.80887 ; infill
 G1 X103.601 Y109.670 E18.81973 ; infill
 G1 X92.130 Y109.670 E19.16208 ; infill
 G1 X92.132 Y109.311 E19.17280 ; infill
 G1 X103.541 Y109.311 E19.51329 ; infill
 G1 X103.481 Y108.952 E19.52415 ; infill
 G1 X92.135 Y108.952 E19.86278 ; infill
 G1 X92.137 Y108.593 E19.87349 ; infill
 G1 X103.421 Y108.593 E20.21026 ; infill
 G1 X103.361 Y108.234 E20.22112 ; infill
 G1 X92.139 Y108.234 E20.55604 ; infill
 G1 X92.142 Y107.875 E20.56675 ; infill
 G1 X103.301 Y107.875 E20.89980 ; infill
 G1 X103.241 Y107.517 E20.91066 ; infill
 G1 X92.144 Y107.517 E21.24185 ; infill
 G1 X92.146 Y107.158 E21.25256 ; infill
 G1 X103.181 Y107.158 E21.58189 ; infill
 G1 X103.121 Y106.799 E21.59276 ; infill
 G1 X92.149 Y106.799 E21.92023 ; infill
 G1 X92.151 Y106.440 E21.93094 ; infill
 G1 X103.061 Y106.440 E22.25655 ; infill
 G1 X103.001 Y106.081 E22.26741 ; infill
 G1 X92.153 Y106.081 E22.59116 ; infill
 G1 X92.156 Y105.722 E22.60187 ; infill
 G1 X102.941 Y105.722 E22.92376 ; infill
 G1 X102.881 Y105.363 E22.93462 ; infill
 G1 X92.158 Y105.363 E23.25465 ; infill
 G1 X92.160 Y105.004 E23.26537 ; infill
 G1 X102.821 Y105.004 E23.58354 ; infill
 G1 X102.761 Y104.645 E23.59440 ; infill
 G1 X92.162 Y104.645 E23.91071 ; infill
 G1 X92.165 Y104.286 E23.92142 ; infill
 G1 X102.701 Y104.286 E24.23587 ; infill
 G1 X102.641 Y103.927 E24.24673 ; infill
 G1 X92.167 Y103.927 E24.55932 ; infill
 G1 X92.169 Y103.568 E24.57003 ; infill
 G1 X102.581 Y103.568 E24.88076 ; infill
 G1 X102.521 Y103.209 E24.89163 ; infill
 G1 X92.172 Y103.209 E25.20050 ; infill
 G1 X92.174 Y102.850 E25.21121 ; infill
 G1 X102.461 Y102.850 E25.51822 ; infill
 G1 X102.401 Y102.492 E25.52908 ; infill
 G1 X92.176 Y102.492 E25.83423 ; infill
 G1 X92.179 Y102.133 E25.84494 ; infill
 G1 X102.341 Y102.133 E26.14823 ; infill
 G1 X102.281 Y101.774 E26.15909 ; infill
 G1 X92.181 Y101.774 E26.46052 ; infill
 G1 X92.183 Y101.415 E26.47123 ; infill
 G1 X102.221 Y101.415 E26.77080 ; infill
 G1 X102.161 Y101.056 E26.78166 ; infill
 G1 X92.185 Y101.056 E27.07937 ; infill
 G1 X92.188 Y100.697 E27.09009 ; infill
 G1 X102.101 Y100.697 E27.38594 ; infill
 G1 X102.040 Y100.338 E27.39680 ; infill
 G1 X92.190 Y100.338 E27.69079 ; infill
 G1 X92.192 Y99.979 E27.70150 ; infill
 G1 X101.980 Y99.979 E27.99363 ; infill
 G1 X101.920 Y99.620 E28.00449 ; infill
 G1 X92.195 Y99.620 E28.29476 ; infill
 G1 X92.197 Y99.261 E28.30547 ; infill
 G1 X101.860 Y99.261 E28.59388 ; infill
 G1 X101.800 Y98.902 E28.60474 ; infill
 G1 X92.199 Y98.902 E28.89129 ; infill
 G1 X92.202 Y98.543 E28.90200 ; infill
 G1 X101.740 Y98.543 E29.18669 ; infill
 G1 X101.680 Y98.184 E29.19755 ; infill
 G1 X92.204 Y98.184 E29.48038 ; infill
 G1 X92.206 Y97.825 E29.49109 ; infill
 G1 X101.620 Y97.825 E29.77206 ; infill
 G1 X101.560 Y97.466 E29.78292 ; infill
 G1 X92.208 Y97.466 E30.06203 ; infill
 G1 X92.211 Y97.108 E30.07274 ; infill
 G1 X101.500 Y97.108 E30.34999 ; infill
 G1 X101.440 Y96.749 E30.36085 ; infill
 G1 X92.213 Y96.749 E30.63624 ; infill
 G1 X92.215 Y96.390 E30.64695 ; infill
 G1 X101.380 Y96.390 E30.92048 ; infill
 G1 X101.320 Y96.031 E30.93134 ; infill
 G1 X92.218 Y96.031 E31.20301 ; infill
 G1 X92.220 Y95.672 E31.21372 ; infill
 G1 X101.260 Y95.672 E31.48353 ; infill
 G1 X101.200 Y95.313 E31.49439 ; infill
 G1 X92.222 Y95.313 E31.76234 ; infill
 G1 X92.225 Y94.954 E31.77305 ; infill
 G1 X101.140 Y94.954 E32.03914 ; infill
 G1 X101.080 Y94.595 E32.05000 ; infill
 G1 X92.227 Y94.595 E32.31423 ; infill
 G1 X92.229 Y94.236 E32.32494 ; infill
 G1 X101.020 Y94.236 E32.58731 ; infill
 G1 X100.960 Y93.877 E32.59817 ; infill
 G1 X92.231 Y93.877 E32.85868 ; infill
 G1 X92.234 Y93.518 E32.86939 ; infill
 G1 X100.900 Y93.518 E33.12804 ; infill
 G1 X100.840 Y93.159 E33.13890 ; infill
 G1 X92.236 Y93.159 E33.39569 ; infill
 G1 X92.238 Y92.800 E33.40640 ; infill
 G1 X100.780 Y92.800 E33.66133 ; infill
 G1 X100.720 Y92.441 E33.67219 ; infill
 G1 X92.241 Y92.441 E33.92526 ; infill
 G1 X92.243 Y92.083 E33.93597 ; infill
 G1 X100.660 Y92.083 E34.18718 ; infill
 G1 X100.600 Y91.724 E34.19804 ; infill
 G1 X92.245 Y91.724 E34.44738 ; infill
 G1 X92.248 Y91.365 E34.45810 ; infill
 G1 X100.540 Y91.365 E34.70558 ; infill
 G1 X100.480 Y91.006 E34.71644 ; infill
 G1 X92.250 Y91.006 E34.96207 ; infill
 G1 X92.252 Y90.647 E34.97278 ; infill
 G1 X100.420 Y90.647 E35.21655 ; infill
 G1 X100.360 Y90.288 E35.22741 ; infill
 G1 X92.254 Y90.288 E35.46932 ; infill
 G1 X92.257 Y89.929 E35.48003 ; infill
 G1 X100.300 Y89.929 E35.72008 ; infill
 G1 X100.240 Y89.570 E35.73094 ; infill
 G1 X92.259 Y89.570 E35.96913 ; infill
 G1 X92.261 Y89.211 E35.97984 ; infill
 G1 X100.180 Y89.211 E36.21617 ; infill
 G1 X100.120 Y88.852 E36.22703 ; infill
 G1 X92.264 Y88.852 E36.46149 ; infill
 G1 X92.266 Y88.493 E36.47221 ; infill
 G1 X100.060 Y88.493 E36.70481 ; infill
 G1 X100.000 Y88.134 E36.71567 ; infill
 G1 X92.268 Y88.134 E36.94642 ; infill
 G1 X92.271 Y87.775 E36.95713 ; infill
 G1 X99.940 Y87.775 E37.18602 ; infill
 G1 X99.880 Y87.416 E37.19688 ; infill
 G1 X92.273 Y87.416 E37.42391 ; infill
 G1 X92.275 Y87.058 E37.43462 ; infill
 G1 X99.820 Y87.058 E37.65978 ; infill
 G1 X99.760 Y86.699 E37.67065 ; infill
 G1 X92.277 Y86.699 E37.89395 ; infill
 G1 X92.280 Y86.340 E37.90466 ; infill
 G1 X99.700 Y86.340 E38.12611 ; infill
 G1 X99.640 Y85.981 E38.13697 ; infill
 G1 X92.282 Y85.981 E38.35656 ; infill
 G1 X92.284 Y85.622 E38.36727 ; infill
 G1 X99.580 Y85.622 E38.58500 ; infill
 G1 X99.520 Y85.263 E38.59586 ; infill
 G1 X92.287 Y85.263 E38.81172 ; infill
 G1 X92.289 Y84.904 E38.82243 ; infill
 G1 X99.459 Y84.904 E39.03644 ; infill
 G1 X99.399 Y84.545 E39.04730 ; infill
 G1 X92.291 Y84.545 E39.25945 ; infill
 G1 X92.294 Y84.186 E39.27016 ; infill
 G1 X99.339 Y84.186 E39.48044 ; infill
 G1 X99.279 Y83.827 E39.49131 ; infill
 G1 X92.296 Y83.827 E39.69973 ; infill
 G1 X92.298 Y83.468 E39.71044 ; infill
 G1 X99.219 Y83.468 E39.91701 ; infill
 G1 X99.159 Y83.109 E39.92787 ; infill
 G1 X92.300 Y83.109 E40.13258 ; infill
 G1 X92.303 Y82.750 E40.14329 ; infill
 G1 X99.099 Y82.750 E40.34613 ; infill
 G1 X99.039 Y82.391 E40.35699 ; infill
 G1 X92.305 Y82.391 E40.55798 ; infill
 G1 X92.307 Y82.032 E40.56869 ; infill
 G1 X98.979 Y82.032 E40.76782 ; infill
 G1 X98.919 Y81.674 E40.77868 ; infill
 G1 X92.310 Y81.674 E40.97594 ; infill
 G1 X92.312 Y81.315 E40.98666 ; infill
 G1 X98.859 Y81.315 E41.18206 ; infill
 G1 X98.799 Y80.956 E41.19292 ; infill
 G1 X92.314 Y80.956 E41.38647 ; infill
 G1 X92.317 Y80.597 E41.39718 ; infill
 G1 X98.739 Y80.597 E41.58886 ; infill
 G1 X98.679 Y80.238 E41.59972 ; infill
 G1 X92.319 Y80.238 E41.78955 ; infill
 G1 X92.321 Y79.879 E41.80026 ; infill
 G1 X98.619 Y79.879 E41.98823 ; infill
 G1 X98.559 Y79.520 E41.99909 ; infill
 G1 X92.323 Y79.520 E42.18519 ; infill
 G1 X92.326 Y79.161 E42.19590 ; infill
 G1 X98.499 Y79.161 E42.38015 ; infill
 G1 X98.439 Y78.802 E42.39101 ; infill
 G1 X92.328 Y78.802 E42.57339 ; infill
 G1 X92.330 Y78.443 E42.58411 ; infill
 G1 X98.379 Y78.443 E42.76463 ; infill
 G1 X98.319 Y78.084 E42.77549 ; infill
 G1 X92.333 Y78.084 E42.95416 ; infill
 G1 X92.335 Y77.725 E42.96487 ; infill
 G1 X98.259 Y77.725 E43.14167 ; infill
 G1 X98.199 Y77.366 E43.15253 ; infill
 G1 X92.337 Y77.366 E43.32748 ; infill
 G1 X92.340 Y77.007 E43.33819 ; infill
 G1 X98.139 Y77.007 E43.51127 ; infill
 G1 X98.079 Y76.649 E43.52213 ; infill
 G1 X92.342 Y76.649 E43.69336 ; infill
 G1 X92.344 Y76.290 E43.70407 ; infill
 G1 X98.019 Y76.290 E43.87343 ; infill
 G1 X97.959 Y75.931 E43.88430 ; infill
 G1 X92.346 Y75.931 E44.05180 ; infill
 G1 X92.349 Y75.572 E44.06251 ; infill
 G1 X97.899 Y75.572 E44.22815 ; infill
 G1 X97.839 Y75.213 E44.23902 ; infill
 G1 X92.351 Y75.213 E44.40280 ; infill
 G1 X92.353 Y74.854 E44.41351 ; infill
 G1 X97.779 Y74.854 E44.57544 ; infill
 G1 X97.719 Y74.495 E44.58630 ; infill
 G1 X92.356 Y74.495 E44.74636 ; infill
 G1 X92.358 Y74.136 E44.75707 ; infill
 G1 X97.659 Y74.136 E44.91528 ; infill
 G1 X97.599 Y73.777 E44.92614 ; infill
 G1 X92.360 Y73.777 E45.08248 ; infill
 G1 X92.363 Y73.418 E45.09319 ; infill
 G1 X97.539 Y73.418 E45.24767 ; infill
 G1 X97.479 Y73.059 E45.25854 ; infill
 G1 X92.365 Y73.059 E45.41116 ; infill
 G1 X92.367 Y72.700 E45.42187 ; infill
 G1 X97.419 Y72.700 E45.57263 ; infill
 G1 X97.359 Y72.341 E45.58350 ; infill
 G1 X92.369 Y72.341 E45.73240 ; infill
 G1 X92.372 Y71.982 E45.74311 ; infill
 G1 X97.299 Y71.982 E45.89015 ; infill
 G1 X97.239 Y71.624 E45.90101 ; infill
 G1 X92.374 Y71.624 E46.04620 ; infill
 G1 X92.376 Y71.265 E46.05691 ; infill
 G1 X94.661 Y71.265 E46.12510 ; infill
 G1 X94.661 Y70.906 E46.13582 ; infill
 G1 X92.379 Y70.906 E46.20394 ; infill
 G1 X92.381 Y70.547 E46.21465 ; infill
 G1 X94.661 Y70.547 E46.28271 ; infill
 G1 X94.661 Y70.188 E46.29342 ; infill
 G1 X92.383 Y70.188 E46.36141 ; infill
 G1 X92.386 Y69.829 E46.37213 ; infill
 G1 X94.661 Y69.829 E46.44005 ; infill
 G1 X94.661 Y69.470 E46.45076 ; infill
 G1 X92.388 Y69.470 E46.51861 ; infill
 G1 X92.390 Y69.111 E46.52932 ; infill
 G1 X94.661 Y69.111 E46.59710 ; infill
 G1 X94.661 Y68.752 E46.60782 ; infill
 G1 X92.392 Y68.752 E46.67553 ; infill
 G1 X92.395 Y68.393 E46.68624 ; infill
 G1 X94.661 Y68.393 E46.75389 ; infill
 G1 X92.458 Y67.918 F12000.000 ; move to first infill point
 G1 X93.845 Y66.092 E46.86011 F7200.000 ; infill
 G1 F9600
 G1 X92.458 Y67.918 E46.31548 ; wipe and retract
 G1 E41.86011 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.000 F12000.000 ; lift Z
 G1 X96.608 Y62.091 F12000.000 ; move to first perimeter point
 G1 Z3.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X90.488 Y62.091 E5.18170 F7200.000 ; perimeter
 G1 X90.507 Y59.215 E5.26712 ; perimeter
 G1 X96.608 Y59.215 E5.44827 ; perimeter
 G1 X96.608 Y62.031 E5.53191 ; perimeter
 G1 X96.262 Y61.891 F12000.000 ; move inwards before travel
 G1 X96.251 Y61.734 F12000.000 ; move to first perimeter point
 G1 X90.848 Y61.734 E5.69234 F7200.000 ; perimeter
 G1 X90.862 Y59.572 E5.75655 ; perimeter
 G1 X96.251 Y59.572 E5.91657 ; perimeter
 G1 X96.251 Y61.674 E5.97900 ; perimeter
 G1 X95.894 Y61.377 F12000.000 ; move to first perimeter point
 G1 X91.207 Y61.377 E6.11816 F7200.000 ; perimeter
 G1 X91.216 Y59.929 E6.16117 ; perimeter
 G1 X95.894 Y59.929 E6.30005 ; perimeter
 G1 X95.894 Y61.317 E6.34127 ; perimeter
 G1 X95.537 Y61.020 F12000.000 ; move to first perimeter point
 G1 X91.567 Y61.020 E6.45916 F7200.000 ; perimeter
 G1 X91.571 Y60.286 E6.48096 ; perimeter
 G1 X95.537 Y60.286 E6.59871 ; perimeter
 G1 X95.537 Y60.960 E6.61873 ; perimeter
 G1 X95.358 Y60.653 F12000.000 ; move to first infill point
 G1 X91.747 Y60.653 E6.84604 F1800.000 ; infill
 G1 F9600
 G1 X95.358 Y60.653 E5.98845 ; wipe and retract
 G1 E1.84604 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.000 F12000.000 ; lift Z
 M106 S232.05 ; enable fan
 G1 X96.608 Y69.215 F12000.000 ; move to first perimeter point
 G1 Z3.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.811 Y69.215 E5.06541 F7200.000 ; perimeter
 G1 X107.942 Y123.815 E6.70907 ; perimeter
 G1 X95.608 Y123.815 E7.07527 ; perimeter
 G1 X95.608 Y132.215 E7.32468 ; perimeter
 G1 X109.346 Y132.215 E7.73258 ; perimeter
 G1 X109.992 Y136.074 E7.84876 ; perimeter
 G1 X109.992 Y137.923 E7.90365 ; perimeter
 G1 X109.148 Y139.531 E7.95757 ; perimeter
 G1 X107.653 Y140.562 E8.01149 ; perimeter
 G1 X105.814 Y140.785 E8.06651 ; perimeter
 G1 X93.363 Y140.785 E8.43620 ; perimeter
 G1 X91.653 Y140.137 E8.49050 ; perimeter
 G1 X90.449 Y138.778 E8.54441 ; perimeter
 G1 X90.008 Y136.991 E8.59905 ; perimeter
 G1 X90.477 Y63.938 E10.76814 ; perimeter
 G1 X96.608 Y63.938 E10.95020 ; perimeter
 G1 X96.608 Y69.155 E11.10509 ; perimeter
 G1 X96.608 Y69.615 F12000.000 ; move inwards before travel
 G1 X96.251 Y69.572 F12000.000 ; move to first perimeter point
 G1 X98.509 Y69.572 E11.17212 F7200.000 ; perimeter
 G1 X107.520 Y123.458 E12.79428 ; perimeter
 G1 X95.251 Y123.458 E13.15856 ; perimeter
 G1 X95.251 Y132.572 E13.42918 ; perimeter
 G1 X98.451 Y132.572 E13.52419 ; perimeter
 G1 X98.451 Y136.372 E13.63701 ; perimeter
 G1 X105.165 Y136.372 E13.83637 ; perimeter
 G1 X105.165 Y132.572 E13.94919 ; perimeter
 G1 X109.044 Y132.572 E14.06436 ; perimeter
 G1 X109.635 Y136.104 E14.17069 ; perimeter
 G1 X109.635 Y137.835 E14.22208 ; perimeter
 G1 X108.873 Y139.287 E14.27077 ; perimeter
 G1 X107.523 Y140.218 E14.31947 ; perimeter
 G1 X105.792 Y140.428 E14.37123 ; perimeter
 G1 X93.428 Y140.428 E14.73834 ; perimeter
 G1 X91.862 Y139.834 E14.78808 ; perimeter
 G1 X90.774 Y138.607 E14.83677 ; perimeter
 G1 X90.366 Y136.949 E14.88747 ; perimeter
 G1 X90.831 Y64.295 E17.04471 ; perimeter
 G1 X96.251 Y64.295 E17.20562 ; perimeter
 G1 X96.251 Y69.512 E17.36052 ; perimeter
 G1 X95.894 Y69.929 F12000.000 ; move to first perimeter point
 G1 X98.206 Y69.929 E17.42918 F7200.000 ; perimeter
 G1 X107.098 Y123.100 E19.02984 ; perimeter
 G1 X94.894 Y123.100 E19.39220 ; perimeter
 G1 X94.894 Y132.929 E19.68401 ; perimeter
 G1 X98.094 Y132.929 E19.77903 ; perimeter
 G1 X98.094 Y136.729 E19.89185 ; perimeter
 G1 X105.522 Y136.729 E20.11241 ; perimeter
 G1 X105.522 Y132.929 E20.22524 ; perimeter
 G1 X108.742 Y132.929 E20.32083 ; perimeter
 G1 X109.278 Y136.133 E20.41730 ; perimeter
 G1 X109.278 Y137.747 E20.46520 ; perimeter
 G1 X108.597 Y139.043 E20.50866 ; perimeter
 G1 X107.393 Y139.874 E20.55213 ; perimeter
 G1 X105.771 Y140.071 E20.60064 ; perimeter
 G1 X93.493 Y140.071 E20.96516 ; perimeter
 G1 X92.071 Y139.532 E21.01035 ; perimeter
 G1 X91.100 Y138.436 E21.05381 ; perimeter
 G1 X90.723 Y136.906 E21.10058 ; perimeter
 G1 X91.186 Y64.652 E23.24595 ; perimeter
 G1 X95.894 Y64.652 E23.38574 ; perimeter
 G1 X95.894 Y69.869 E23.54063 ; perimeter
 G1 X91.819 Y69.943 F12000.000 ; move to first perimeter point
 G1 X91.536 Y118.153 E24.97205 F7200.000 ; perimeter
 G1 X91.886 Y119.700 E25.01916 ; perimeter
 G1 X92.975 Y121.041 E25.07045 ; perimeter
 G1 X94.490 Y121.668 E25.11915 ; perimeter
 G1 X101.702 Y121.668 E25.33327 ; perimeter
 G1 X103.161 Y121.475 E25.37698 ; perimeter
 G1 X104.541 Y120.436 E25.42827 ; perimeter
 G1 X105.290 Y118.879 E25.47957 ; perimeter
 G1 X105.290 Y117.343 E25.52517 ; perimeter
 G1 X102.350 Y98.162 E26.10133 ; perimeter
 G1 X102.560 Y98.128 E26.10765 ; perimeter
 G1 X106.677 Y122.743 E26.84865 ; perimeter
 G1 X94.537 Y122.743 E27.20909 ; perimeter
 G1 X94.537 Y133.286 E27.52211 ; perimeter
 G1 X97.737 Y133.286 E27.61712 ; perimeter
 G1 X97.737 Y137.086 E27.72995 ; perimeter
 G1 X105.879 Y137.086 E27.97171 ; perimeter
 G1 X105.879 Y133.286 E28.08454 ; perimeter
 G1 X108.440 Y133.286 E28.16055 ; perimeter
 G1 X108.921 Y136.163 E28.24716 ; perimeter
 G1 X108.921 Y137.659 E28.29157 ; perimeter
 G1 X108.322 Y138.799 E28.32981 ; perimeter
 G1 X107.262 Y139.530 E28.36805 ; perimeter
 G1 X105.749 Y139.714 E28.41330 ; perimeter
 G1 X93.559 Y139.714 E28.77524 ; perimeter
 G1 X92.280 Y139.229 E28.81587 ; perimeter
 G1 X91.426 Y138.265 E28.85411 ; perimeter
 G1 X91.080 Y136.864 E28.89694 ; perimeter
 G1 X91.541 Y65.009 E31.03046 ; perimeter
 G1 X95.537 Y65.009 E31.14911 ; perimeter
 G1 X95.537 Y69.943 E31.29561 ; perimeter
 G1 X91.879 Y69.943 E31.40421 ; perimeter
 G1 X91.869 Y69.586 F12000.000 ; move to first perimeter point
 G1 X91.896 Y65.366 E31.52951 F7200.000 ; perimeter
 G1 X95.180 Y65.366 E31.62702 ; perimeter
 G1 X95.180 Y69.586 E31.75232 ; perimeter
 G1 X91.929 Y69.586 E31.84885 ; perimeter
 G1 X92.228 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.251 Y65.723 E31.95295 F7200.000 ; perimeter
 G1 X94.823 Y65.723 E32.02933 ; perimeter
 G1 X94.823 Y69.229 E32.13342 ; perimeter
 G1 X92.288 Y69.229 E32.20868 ; perimeter
 G1 F9600
 G1 X92.251 Y65.723 E31.37595 ; wipe and retract
 G1 F9600
 G1 X94.823 Y65.723 E30.76506 ; wipe and retract
 G1 F9600
 G1 X94.823 Y69.229 E29.93238 ; wipe and retract
 G1 F9600
 G1 X92.288 Y69.229 E29.33040 ; wipe and retract
 G1 E27.20868 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.200 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z3.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X106.236 Y137.443 E5.80503 ; perimeter
 G1 X106.236 Y133.643 E5.91785 ; perimeter
 G1 X108.137 Y133.643 E5.97429 ; perimeter
 G1 X108.564 Y136.193 E6.05104 ; perimeter
 G1 X108.564 Y137.571 E6.09196 ; perimeter
 G1 X108.047 Y138.555 E6.12497 ; perimeter
 G1 X107.132 Y139.187 E6.15798 ; perimeter
 G1 X105.728 Y139.357 E6.19998 ; perimeter
 G1 X93.624 Y139.357 E6.55934 ; perimeter
 G1 X92.488 Y138.926 E6.59541 ; perimeter
 G1 X91.751 Y138.094 E6.62842 ; perimeter
 G1 X91.438 Y136.822 E6.66732 ; perimeter
 G1 X91.546 Y119.849 E7.17128 ; perimeter
 G1 X92.754 Y121.337 E7.22818 ; perimeter
 G1 X94.419 Y122.025 E7.28168 ; perimeter
 G1 X101.725 Y122.025 E7.49860 ; perimeter
 G1 X103.301 Y121.817 E7.54579 ; perimeter
 G1 X104.825 Y120.669 E7.60245 ; perimeter
 G1 X105.561 Y119.141 E7.65279 ; perimeter
 G1 X105.716 Y119.163 E7.65745 ; perimeter
 G1 X106.255 Y122.386 E7.75447 ; perimeter
 G1 X94.240 Y122.386 E8.11121 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E8.11579 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E8.16422 ; perimeter
 G1 X105.394 Y120.311 E8.18370 ; perimeter
 G1 X105.549 Y120.333 E8.18835 ; perimeter
 G1 X105.833 Y122.029 E8.23942 ; perimeter
 G1 X103.916 Y122.029 E8.29635 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E8.25304 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.86568 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E7.70986 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E7.67261 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E7.26411 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.80871 ; wipe and retract
 G1 E3.29635 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.200 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z3.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X106.593 Y137.800 E5.49201 ; perimeter
 G1 X106.593 Y134.000 E5.60483 ; perimeter
 G1 X107.835 Y134.000 E5.64169 ; perimeter
 G1 X108.207 Y136.222 E5.70859 ; perimeter
 G1 X108.207 Y137.482 E5.74601 ; perimeter
 G1 X107.772 Y138.311 E5.77380 ; perimeter
 G1 X107.001 Y138.843 E5.80158 ; perimeter
 G1 X105.706 Y139.000 E5.84033 ; perimeter
 G1 X93.690 Y139.000 E6.19710 ; perimeter
 G1 X92.697 Y138.624 E6.22862 ; perimeter
 G1 X92.077 Y137.923 E6.25640 ; perimeter
 G1 X91.795 Y136.780 E6.29137 ; perimeter
 G1 X91.897 Y120.847 E6.76443 ; perimeter
 G1 X92.534 Y121.632 E6.79444 ; perimeter
 G1 X93.823 Y122.165 E6.83584 ; perimeter
 G1 X93.823 Y133.940 E7.18545 ; perimeter
 G1 F9600
 G1 X97.023 Y134.000 E6.42532 ; wipe and retract
 G1 F9600
 G1 X97.023 Y137.800 E5.52282 ; wipe and retract
 G1 F9600
 G1 X106.593 Y137.800 E3.24976 ; wipe and retract
 G1 F9600
 G1 X106.593 Y134.371 E2.43545 ; wipe and retract
 G1 E2.18545 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.200 F12000.000 ; lift Z
 G1 X92.884 Y71.015 F12000.000 ; move to first perimeter point
 G1 Z3.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.105 Y71.015 E5.12531 F7200.000 ; perimeter
 G1 X104.219 Y117.425 E6.51939 ; perimeter
 G1 X104.219 Y118.635 E6.55531 ; perimeter
 G1 X103.689 Y119.737 E6.59162 ; perimeter
 G1 X102.742 Y120.450 E6.62683 ; perimeter
 G1 X101.631 Y120.597 E6.66009 ; perimeter
 G1 X94.703 Y120.597 E6.86579 ; perimeter
 G1 X93.635 Y120.155 E6.90011 ; perimeter
 G1 X92.875 Y119.220 E6.93589 ; perimeter
 G1 X92.608 Y118.036 E6.97191 ; perimeter
 G1 X92.884 Y71.075 E8.36629 ; perimeter
 G1 X92.885 Y70.615 F12000.000 ; move inwards before travel
 G1 X92.529 Y70.658 F12000.000 ; move to first perimeter point
 G1 X97.411 Y70.658 E8.51124 F7200.000 ; perimeter
 G1 X104.576 Y117.398 E9.91523 ; perimeter
 G1 X104.576 Y118.716 E9.95438 ; perimeter
 G1 X103.973 Y119.970 E9.99568 ; perimeter
 G1 X102.881 Y120.792 E10.03626 ; perimeter
 G1 X101.655 Y120.954 E10.07300 ; perimeter
 G1 X94.632 Y120.954 E10.28150 ; perimeter
 G1 X93.415 Y120.451 E10.32062 ; perimeter
 G1 X92.545 Y119.380 E10.36157 ; perimeter
 G1 X92.251 Y118.075 E10.40129 ; perimeter
 G1 X92.529 Y70.718 E11.80742 ; perimeter
 G1 X92.174 Y70.300 F12000.000 ; move to first perimeter point
 G1 X97.718 Y70.300 E11.97201 F7200.000 ; perimeter
 G1 X104.933 Y117.371 E13.38591 ; perimeter
 G1 X104.933 Y118.797 E13.42828 ; perimeter
 G1 X104.257 Y120.203 E13.47458 ; perimeter
 G1 X103.021 Y121.133 E13.52051 ; perimeter
 G1 X101.678 Y121.311 E13.56074 ; perimeter
 G1 X94.561 Y121.311 E13.77205 ; perimeter
 G1 X93.195 Y120.746 E13.81596 ; perimeter
 G1 X92.216 Y119.540 E13.86208 ; perimeter
 G1 X91.893 Y118.114 E13.90549 ; perimeter
 G1 X92.174 Y70.360 E15.32338 ; perimeter
 G1 F9600
 G1 X97.718 Y70.300 E14.00664 ; wipe and retract
 G1 F9600
 G1 X99.908 Y84.589 E10.57338 ; wipe and retract
 G1 E10.32338 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.200 F12000.000 ; lift Z
 G1 X98.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z3.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X104.808 Y133.015 E5.17815 F7200.000 ; perimeter
 G1 X104.808 Y136.015 E5.26722 ; perimeter
 G1 X98.808 Y136.015 E5.44537 ; perimeter
 G1 X98.808 Y133.075 E5.53266 ; perimeter
 G1 X98.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X104.987 Y132.615 E5.93285 F1800.000 ; infill
 G1 X107.259 Y134.221 F12000.000 ; move to first infill point
 G1 X107.259 Y138.384 E6.12646 F7200.000 ; infill
 G1 X106.699 Y138.675 E6.15577 ; infill
 G1 X106.699 Y138.001 E6.18712 ; infill
 G1 X106.140 Y138.001 E6.21313 ; infill
 G1 X106.140 Y138.743 E6.24763 ; infill
 G1 X105.581 Y138.779 E6.27369 ; infill
 G1 X105.581 Y138.001 E6.30984 ; infill
 G1 X105.021 Y138.001 E6.33585 ; infill
 G1 X105.021 Y138.779 E6.37200 ; infill
 G1 X104.462 Y138.779 E6.39801 ; infill
 G1 X104.462 Y138.001 E6.43415 ; infill
 G1 X103.903 Y138.001 E6.46016 ; infill
 G1 X103.903 Y138.779 E6.49631 ; infill
 G1 X103.344 Y138.779 E6.52232 ; infill
 G1 X103.344 Y138.001 E6.55847 ; infill
 G1 X102.784 Y138.001 E6.58448 ; infill
 G1 X102.784 Y138.779 E6.62063 ; infill
 G1 X102.225 Y138.779 E6.64664 ; infill
 G1 X102.225 Y138.001 E6.68279 ; infill
 G1 X101.666 Y138.001 E6.70880 ; infill
 G1 X101.666 Y138.779 E6.74494 ; infill
 G1 X101.106 Y138.779 E6.77096 ; infill
 G1 X101.106 Y138.001 E6.80710 ; infill
 G1 X100.547 Y138.001 E6.83311 ; infill
 G1 X100.547 Y138.779 E6.86926 ; infill
 G1 X99.988 Y138.779 E6.89527 ; infill
 G1 X99.988 Y138.001 E6.93142 ; infill
 G1 X99.428 Y138.001 E6.95743 ; infill
 G1 X99.428 Y138.779 E6.99358 ; infill
 G1 X98.869 Y138.779 E7.01959 ; infill
 G1 X98.869 Y138.001 E7.05573 ; infill
 G1 X98.310 Y138.001 E7.08175 ; infill
 G1 X98.310 Y138.779 E7.11789 ; infill
 G1 X97.751 Y138.779 E7.14390 ; infill
 G1 X97.751 Y138.001 E7.18005 ; infill
 G1 X97.191 Y138.001 E7.20606 ; infill
 G1 X97.191 Y138.779 E7.24221 ; infill
 G1 X107.818 Y137.597 F12000.000 ; move to first infill point
 G1 X107.818 Y135.966 E7.31805 F7200.000 ; infill
 G1 X96.688 Y138.800 F12000.000 ; move to first infill point
 M106 S255 ; enable fan
 G1 X96.688 Y134.200 E7.56534 F1680.000 ; infill
 G1 X96.232 Y134.200 E7.58984 ; infill
 G1 X96.232 Y138.800 E7.83712 ; infill
 G1 X95.776 Y138.800 E7.86162 ; infill
 G1 X95.776 Y134.200 E8.10891 ; infill
 G1 X95.320 Y134.200 E8.13341 ; infill
 G1 X95.320 Y138.800 E8.38069 ; infill
 G1 X94.865 Y138.800 E8.40519 ; infill
 G1 X94.865 Y134.200 E8.65248 ; infill
 G1 X94.409 Y134.200 E8.67698 ; infill
 G1 X94.409 Y138.800 E8.92426 ; infill
 G1 X93.953 Y138.800 E8.94876 ; infill
 G1 X93.953 Y134.200 E9.19605 ; infill
 G1 X93.498 Y134.200 E9.22055 ; infill
 G1 X93.498 Y138.725 E9.46381 ; infill
 G1 X93.042 Y138.552 E9.49001 ; infill
 G1 X93.042 Y134.200 E9.72399 ; infill
 G1 X92.586 Y134.200 E9.74848 ; infill
 G1 X92.586 Y138.158 E9.96125 ; infill
 M106 S232.05 ; enable fan
 G1 X92.130 Y136.959 F12000.000 ; move to first infill point
 M106 S255 ; enable fan
 G1 X92.130 Y134.200 E10.10956 F1680.000 ; infill
 M106 S232.05 ; enable fan
 G1 X93.434 Y133.999 F12000.000 ; move to first infill point
 G1 X93.434 Y122.236 E10.71192 F7200.000 ; infill
 G1 X92.818 Y121.981 E10.74605 ; infill
 G1 X92.818 Y133.999 E11.36146 ; infill
 G1 X92.202 Y133.999 E11.39300 ; infill
 G1 X92.202 Y130.545 E11.56988 ; infill
 G1 X91.703 Y119.744 F12000.000 ; move to first infill point
 G1 X91.491 Y119.308 E11.58427 F1800.000 ; infill
 G1 X91.388 Y118.357 E11.61268 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E11.38547 ; wipe and retract
 G1 F9600
 G1 X91.703 Y119.744 E11.27032 ; wipe and retract
 G1 E6.61268 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.200 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z3.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X104.774 Y121.808 F12000.000 ; move to first infill point
 G1 X104.774 Y121.449 E5.07163 F7200.000 ; infill
 G1 X105.374 Y121.352 E5.10194 ; infill
 G1 X105.374 Y121.808 E5.12466 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.930 E5.19070 F1800.000 ; infill
 G1 X105.579 Y117.930 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.20887 F1800.000 ; infill
 G1 X104.413 Y110.364 E5.41805 ; infill
 G1 X102.427 Y97.969 F12000.000 ; move to first infill point
 G1 X98.594 Y74.053 E6.94282 F1800.000 ; infill
 G1 X98.594 Y74.053 F12000.000 ; move to first infill point
 G1 X97.962 Y70.107 E7.06146 F1800.000 ; infill
 G1 X94.434 Y69.008 F12000.000 ; move to first infill point
 G1 X94.434 Y65.945 E7.21557 F7200.000 ; infill
 G1 X93.829 Y65.945 E7.24601 ; infill
 G1 X93.829 Y69.008 E7.40012 ; infill
 G1 X93.224 Y69.008 E7.43056 ; infill
 G1 X93.224 Y65.945 E7.58467 ; infill
 G1 X92.619 Y65.945 E7.61511 ; infill
 G1 X92.619 Y69.008 E7.76922 ; infill
 G1 F9600
 G1 X92.619 Y65.945 E7.04170 ; wipe and retract
 G1 F9600
 G1 X93.224 Y65.945 E6.89800 ; wipe and retract
 G1 F9600
 G1 X93.224 Y69.008 E6.17048 ; wipe and retract
 G1 F9600
 G1 X93.829 Y69.008 E6.02678 ; wipe and retract
 G1 F9600
 G1 X93.829 Y65.945 E5.29926 ; wipe and retract
 G1 F9600
 G1 X94.434 Y65.945 E5.15556 ; wipe and retract
 G1 F9600
 G1 X94.434 Y69.008 E4.42804 ; wipe and retract
 G1 E2.76922 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.200 F12000.000 ; lift Z
 G1 X96.608 Y62.091 F12000.000 ; move to first perimeter point
 G1 Z3.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X90.488 Y62.091 E5.18170 F7200.000 ; perimeter
 G1 X90.507 Y59.215 E5.26712 ; perimeter
 G1 X96.608 Y59.215 E5.44827 ; perimeter
 G1 X96.608 Y62.031 E5.53191 ; perimeter
 G1 X96.262 Y61.891 F12000.000 ; move inwards before travel
 G1 X96.251 Y61.734 F12000.000 ; move to first perimeter point
 G1 X90.848 Y61.734 E5.69234 F7200.000 ; perimeter
 G1 X90.862 Y59.572 E5.75655 ; perimeter
 G1 X96.251 Y59.572 E5.91657 ; perimeter
 G1 X96.251 Y61.674 E5.97900 ; perimeter
 G1 X95.894 Y61.377 F12000.000 ; move to first perimeter point
 G1 X91.207 Y61.377 E6.11816 F7200.000 ; perimeter
 G1 X91.216 Y59.929 E6.16117 ; perimeter
 G1 X95.894 Y59.929 E6.30005 ; perimeter
 G1 X95.894 Y61.317 E6.34127 ; perimeter
 G1 X95.537 Y61.020 F12000.000 ; move to first perimeter point
 G1 X91.567 Y61.020 E6.45916 F7200.000 ; perimeter
 G1 X91.571 Y60.286 E6.48096 ; perimeter
 G1 X95.537 Y60.286 E6.59871 ; perimeter
 G1 X95.537 Y60.960 E6.61873 ; perimeter
 G1 X95.358 Y60.653 F12000.000 ; move to first infill point
 G1 X91.747 Y60.653 E6.84604 F1800.000 ; infill
 G1 F9600
 G1 X95.358 Y60.653 E5.98845 ; wipe and retract
 G1 E1.84604 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.200 F12000.000 ; lift Z
 G1 Z3.200 F12000.000 ; move to next layer (27)
 M106 S237.15 ; enable fan
 G1 Z4.200 F12000.000 ; lift Z
 G1 X96.608 Y69.215 F12000.000 ; move to first perimeter point
 G1 Z3.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.811 Y69.215 E5.06541 F7200.000 ; perimeter
 G1 X107.942 Y123.815 E6.70907 ; perimeter
 G1 X95.608 Y123.815 E7.07527 ; perimeter
 G1 X95.608 Y132.215 E7.32468 ; perimeter
 G1 X109.346 Y132.215 E7.73258 ; perimeter
 G1 X109.992 Y136.074 E7.84876 ; perimeter
 G1 X109.992 Y137.923 E7.90365 ; perimeter
 G1 X109.148 Y139.531 E7.95757 ; perimeter
 G1 X107.653 Y140.562 E8.01149 ; perimeter
 G1 X105.814 Y140.785 E8.06651 ; perimeter
 G1 X93.363 Y140.785 E8.43620 ; perimeter
 G1 X91.653 Y140.137 E8.49050 ; perimeter
 G1 X90.449 Y138.778 E8.54441 ; perimeter
 G1 X90.008 Y136.991 E8.59905 ; perimeter
 G1 X90.477 Y63.884 E10.76973 ; perimeter
 G1 X96.608 Y63.884 E10.95178 ; perimeter
 G1 X96.608 Y69.155 E11.10826 ; perimeter
 G1 X96.608 Y69.615 F12000.000 ; move inwards before travel
 G1 X96.251 Y69.572 F12000.000 ; move to first perimeter point
 G1 X98.509 Y69.572 E11.17530 F7200.000 ; perimeter
 G1 X107.520 Y123.458 E12.79745 ; perimeter
 G1 X95.251 Y123.458 E13.16174 ; perimeter
 G1 X95.251 Y132.572 E13.43235 ; perimeter
 G1 X98.451 Y132.572 E13.52736 ; perimeter
 G1 X98.451 Y136.372 E13.64019 ; perimeter
 G1 X105.165 Y136.372 E13.83954 ; perimeter
 G1 X105.165 Y132.572 E13.95237 ; perimeter
 G1 X109.044 Y132.572 E14.06754 ; perimeter
 G1 X109.635 Y136.104 E14.17386 ; perimeter
 G1 X109.635 Y137.835 E14.22526 ; perimeter
 G1 X108.873 Y139.287 E14.27395 ; perimeter
 G1 X107.523 Y140.218 E14.32264 ; perimeter
 G1 X105.792 Y140.428 E14.37440 ; perimeter
 G1 X93.428 Y140.428 E14.74151 ; perimeter
 G1 X91.862 Y139.834 E14.79125 ; perimeter
 G1 X90.774 Y138.607 E14.83994 ; perimeter
 G1 X90.366 Y136.949 E14.89065 ; perimeter
 G1 X90.832 Y64.241 E17.04947 ; perimeter
 G1 X96.251 Y64.241 E17.21038 ; perimeter
 G1 X96.251 Y69.512 E17.36686 ; perimeter
 G1 X95.894 Y69.929 F12000.000 ; move to first perimeter point
 G1 X98.206 Y69.929 E17.43552 F7200.000 ; perimeter
 G1 X107.098 Y123.100 E19.03618 ; perimeter
 G1 X94.894 Y123.100 E19.39854 ; perimeter
 G1 X94.894 Y132.929 E19.69036 ; perimeter
 G1 X98.094 Y132.929 E19.78537 ; perimeter
 G1 X98.094 Y136.729 E19.89820 ; perimeter
 G1 X105.522 Y136.729 E20.11875 ; perimeter
 G1 X105.522 Y132.929 E20.23158 ; perimeter
 G1 X108.742 Y132.929 E20.32717 ; perimeter
 G1 X109.278 Y136.133 E20.42364 ; perimeter
 G1 X109.278 Y137.747 E20.47154 ; perimeter
 G1 X108.597 Y139.043 E20.51501 ; perimeter
 G1 X107.393 Y139.874 E20.55847 ; perimeter
 G1 X105.771 Y140.071 E20.60698 ; perimeter
 G1 X93.493 Y140.071 E20.97151 ; perimeter
 G1 X92.071 Y139.532 E21.01669 ; perimeter
 G1 X91.100 Y138.436 E21.06015 ; perimeter
 G1 X90.723 Y136.906 E21.10693 ; perimeter
 G1 X91.186 Y64.598 E23.25389 ; perimeter
 G1 X95.894 Y64.598 E23.39366 ; perimeter
 G1 X95.894 Y69.869 E23.55015 ; perimeter
 G1 X91.819 Y69.943 F12000.000 ; move to first perimeter point
 G1 X91.536 Y118.153 E24.98157 F7200.000 ; perimeter
 G1 X91.886 Y119.700 E25.02868 ; perimeter
 G1 X92.975 Y121.041 E25.07997 ; perimeter
 G1 X94.490 Y121.668 E25.12867 ; perimeter
 G1 X101.702 Y121.668 E25.34279 ; perimeter
 G1 X103.161 Y121.475 E25.38650 ; perimeter
 G1 X104.541 Y120.436 E25.43779 ; perimeter
 G1 X105.290 Y118.879 E25.48909 ; perimeter
 G1 X105.290 Y117.343 E25.53468 ; perimeter
 G1 X102.350 Y98.162 E26.11085 ; perimeter
 G1 X102.560 Y98.128 E26.11717 ; perimeter
 G1 X106.677 Y122.743 E26.85817 ; perimeter
 G1 X94.537 Y122.743 E27.21861 ; perimeter
 G1 X94.537 Y133.286 E27.53163 ; perimeter
 G1 X97.737 Y133.286 E27.62664 ; perimeter
 G1 X97.737 Y137.086 E27.73947 ; perimeter
 G1 X105.879 Y137.086 E27.98123 ; perimeter
 G1 X105.879 Y133.286 E28.09405 ; perimeter
 G1 X108.440 Y133.286 E28.17007 ; perimeter
 G1 X108.921 Y136.163 E28.25668 ; perimeter
 G1 X108.921 Y137.659 E28.30109 ; perimeter
 G1 X108.322 Y138.799 E28.33933 ; perimeter
 G1 X107.262 Y139.530 E28.37756 ; perimeter
 G1 X105.749 Y139.714 E28.42282 ; perimeter
 G1 X93.559 Y139.714 E28.78476 ; perimeter
 G1 X92.280 Y139.229 E28.82539 ; perimeter
 G1 X91.426 Y138.265 E28.86362 ; perimeter
 G1 X91.080 Y136.864 E28.90646 ; perimeter
 G1 X91.541 Y64.955 E31.04157 ; perimeter
 G1 X95.537 Y64.955 E31.16020 ; perimeter
 G1 X95.537 Y69.943 E31.30830 ; perimeter
 G1 X91.879 Y69.943 E31.41690 ; perimeter
 G1 X91.869 Y69.586 F12000.000 ; move to first perimeter point
 G1 X91.896 Y65.313 E31.54380 F7200.000 ; perimeter
 G1 X95.180 Y65.313 E31.64129 ; perimeter
 G1 X95.180 Y69.586 E31.76819 ; perimeter
 G1 X91.929 Y69.586 E31.86472 ; perimeter
 G1 X92.228 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.251 Y65.670 E31.97041 F7200.000 ; perimeter
 G1 X94.823 Y65.670 E32.04677 ; perimeter
 G1 X94.823 Y69.229 E32.15246 ; perimeter
 G1 X92.288 Y69.229 E32.22772 ; perimeter
 G1 F9600
 G1 X92.251 Y65.670 E31.38226 ; wipe and retract
 G1 F9600
 G1 X94.823 Y65.670 E30.77145 ; wipe and retract
 G1 F9600
 G1 X94.823 Y69.229 E29.92604 ; wipe and retract
 G1 F9600
 G1 X92.288 Y69.229 E29.32406 ; wipe and retract
 G1 E27.22772 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.400 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z3.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X106.236 Y137.443 E5.80503 ; perimeter
 G1 X106.236 Y133.643 E5.91785 ; perimeter
 G1 X108.137 Y133.643 E5.97429 ; perimeter
 G1 X108.564 Y136.193 E6.05104 ; perimeter
 G1 X108.564 Y137.571 E6.09196 ; perimeter
 G1 X108.047 Y138.555 E6.12497 ; perimeter
 G1 X107.132 Y139.187 E6.15798 ; perimeter
 G1 X105.728 Y139.357 E6.19998 ; perimeter
 G1 X93.624 Y139.357 E6.55934 ; perimeter
 G1 X92.488 Y138.926 E6.59541 ; perimeter
 G1 X91.751 Y138.094 E6.62842 ; perimeter
 G1 X91.438 Y136.822 E6.66732 ; perimeter
 G1 X91.546 Y119.849 E7.17128 ; perimeter
 G1 X92.754 Y121.337 E7.22818 ; perimeter
 G1 X94.419 Y122.025 E7.28168 ; perimeter
 G1 X101.725 Y122.025 E7.49860 ; perimeter
 G1 X103.301 Y121.817 E7.54579 ; perimeter
 G1 X104.825 Y120.669 E7.60245 ; perimeter
 G1 X105.561 Y119.141 E7.65279 ; perimeter
 G1 X105.716 Y119.163 E7.65745 ; perimeter
 G1 X106.255 Y122.386 E7.75447 ; perimeter
 G1 X94.240 Y122.386 E8.11121 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E8.11579 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E8.16422 ; perimeter
 G1 X105.394 Y120.311 E8.18370 ; perimeter
 G1 X105.549 Y120.333 E8.18835 ; perimeter
 G1 X105.833 Y122.029 E8.23942 ; perimeter
 G1 X103.916 Y122.029 E8.29635 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E8.25304 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.86568 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E7.70986 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E7.67261 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E7.26411 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.80871 ; wipe and retract
 G1 E3.29635 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.400 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z3.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X106.593 Y137.800 E5.49201 ; perimeter
 G1 X106.593 Y134.000 E5.60483 ; perimeter
 G1 X107.835 Y134.000 E5.64169 ; perimeter
 G1 X108.207 Y136.222 E5.70859 ; perimeter
 G1 X108.207 Y137.482 E5.74601 ; perimeter
 G1 X107.772 Y138.311 E5.77380 ; perimeter
 G1 X107.001 Y138.843 E5.80158 ; perimeter
 G1 X105.706 Y139.000 E5.84033 ; perimeter
 G1 X93.690 Y139.000 E6.19710 ; perimeter
 G1 X92.697 Y138.624 E6.22862 ; perimeter
 G1 X92.077 Y137.923 E6.25640 ; perimeter
 G1 X91.795 Y136.780 E6.29137 ; perimeter
 G1 X91.897 Y120.847 E6.76443 ; perimeter
 G1 X92.534 Y121.632 E6.79444 ; perimeter
 G1 X93.823 Y122.165 E6.83584 ; perimeter
 G1 X93.823 Y133.940 E7.18545 ; perimeter
 G1 F9600
 G1 X97.023 Y134.000 E6.42532 ; wipe and retract
 G1 F9600
 G1 X97.023 Y137.800 E5.52282 ; wipe and retract
 G1 F9600
 G1 X106.593 Y137.800 E3.24976 ; wipe and retract
 G1 F9600
 G1 X106.593 Y134.371 E2.43545 ; wipe and retract
 G1 E2.18545 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.400 F12000.000 ; lift Z
 G1 X92.884 Y71.015 F12000.000 ; move to first perimeter point
 G1 Z3.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.105 Y71.015 E5.12531 F7200.000 ; perimeter
 G1 X104.219 Y117.425 E6.51939 ; perimeter
 G1 X104.219 Y118.635 E6.55531 ; perimeter
 G1 X103.689 Y119.737 E6.59162 ; perimeter
 G1 X102.742 Y120.450 E6.62683 ; perimeter
 G1 X101.631 Y120.597 E6.66009 ; perimeter
 G1 X94.703 Y120.597 E6.86579 ; perimeter
 G1 X93.635 Y120.155 E6.90011 ; perimeter
 G1 X92.875 Y119.220 E6.93589 ; perimeter
 G1 X92.608 Y118.036 E6.97191 ; perimeter
 G1 X92.884 Y71.075 E8.36629 ; perimeter
 G1 X92.885 Y70.615 F12000.000 ; move inwards before travel
 G1 X92.529 Y70.658 F12000.000 ; move to first perimeter point
 G1 X97.411 Y70.658 E8.51124 F7200.000 ; perimeter
 G1 X104.576 Y117.398 E9.91523 ; perimeter
 G1 X104.576 Y118.716 E9.95438 ; perimeter
 G1 X103.973 Y119.970 E9.99568 ; perimeter
 G1 X102.881 Y120.792 E10.03626 ; perimeter
 G1 X101.655 Y120.954 E10.07300 ; perimeter
 G1 X94.632 Y120.954 E10.28150 ; perimeter
 G1 X93.415 Y120.451 E10.32062 ; perimeter
 G1 X92.545 Y119.380 E10.36157 ; perimeter
 G1 X92.251 Y118.075 E10.40129 ; perimeter
 G1 X92.529 Y70.718 E11.80742 ; perimeter
 G1 X92.174 Y70.300 F12000.000 ; move to first perimeter point
 G1 X97.718 Y70.300 E11.97201 F7200.000 ; perimeter
 G1 X104.933 Y117.371 E13.38591 ; perimeter
 G1 X104.933 Y118.797 E13.42828 ; perimeter
 G1 X104.257 Y120.203 E13.47458 ; perimeter
 G1 X103.021 Y121.133 E13.52051 ; perimeter
 G1 X101.678 Y121.311 E13.56074 ; perimeter
 G1 X94.561 Y121.311 E13.77205 ; perimeter
 G1 X93.195 Y120.746 E13.81596 ; perimeter
 G1 X92.216 Y119.540 E13.86208 ; perimeter
 G1 X91.893 Y118.114 E13.90549 ; perimeter
 G1 X92.174 Y70.360 E15.32338 ; perimeter
 G1 F9600
 G1 X97.718 Y70.300 E14.00664 ; wipe and retract
 G1 F9600
 G1 X99.908 Y84.589 E10.57338 ; wipe and retract
 G1 E10.32338 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.400 F12000.000 ; lift Z
 G1 X98.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z3.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X104.808 Y133.015 E5.17815 F7200.000 ; perimeter
 G1 X104.808 Y136.015 E5.26722 ; perimeter
 G1 X98.808 Y136.015 E5.44537 ; perimeter
 G1 X98.808 Y133.075 E5.53266 ; perimeter
 G1 X98.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X104.987 Y132.615 E5.93285 F1800.000 ; infill
 G1 X107.726 Y134.586 F12000.000 ; move to first infill point
 G1 X106.795 Y134.586 E5.97739 F7200.000 ; infill
 G1 X106.795 Y135.161 E6.00489 ; infill
 G1 X107.823 Y135.161 E6.05403 ; infill
 G1 X107.919 Y135.736 E6.08192 ; infill
 G1 X106.795 Y135.736 E6.13566 ; infill
 G1 X106.795 Y136.311 E6.16316 ; infill
 G1 X107.985 Y136.311 E6.22008 ; infill
 G1 X107.985 Y136.886 E6.24758 ; infill
 G1 X106.795 Y136.886 E6.30450 ; infill
 G1 X106.795 Y137.461 E6.33200 ; infill
 G1 X107.969 Y137.461 E6.38812 ; infill
 G1 X107.667 Y138.036 E6.41918 ; infill
 G1 X106.795 Y138.036 E6.46087 ; infill
 G1 X106.015 Y138.612 E6.50720 ; infill
 G1 X93.538 Y138.612 E7.10389 ; infill
 G1 X96.821 Y138.036 F12000.000 ; move to first infill point
 G1 X92.502 Y138.036 E7.31042 F7200.000 ; infill
 G1 X92.175 Y137.461 E7.34205 ; infill
 G1 X96.821 Y137.461 E7.56422 ; infill
 G1 X96.821 Y136.886 E7.59172 ; infill
 G1 X92.034 Y136.886 E7.82067 ; infill
 G1 X92.017 Y136.311 E7.84818 ; infill
 G1 X96.821 Y136.311 E8.07794 ; infill
 G1 X96.821 Y135.736 E8.10544 ; infill
 G1 X92.017 Y135.736 E8.33519 ; infill
 G1 X92.017 Y135.161 E8.36269 ; infill
 G1 X96.821 Y135.161 E8.59245 ; infill
 G1 X96.821 Y134.586 E8.61995 ; infill
 G1 X92.017 Y134.586 E8.84971 ; infill
 G1 X93.621 Y134.011 F12000.000 ; move to first infill point
 G1 X92.017 Y134.011 E8.92644 F7200.000 ; infill
 G1 X92.018 Y133.436 E8.95394 ; infill
 G1 X93.621 Y133.436 E9.03062 ; infill
 G1 X93.621 Y132.860 E9.05812 ; infill
 G1 X92.022 Y132.860 E9.13462 ; infill
 G1 X92.025 Y132.285 E9.16212 ; infill
 G1 X93.621 Y132.285 E9.23845 ; infill
 G1 X93.621 Y131.710 E9.26595 ; infill
 G1 X92.029 Y131.710 E9.34210 ; infill
 G1 X92.033 Y131.135 E9.36960 ; infill
 G1 X93.621 Y131.135 E9.44557 ; infill
 G1 X93.621 Y130.560 E9.47307 ; infill
 G1 X92.036 Y130.560 E9.54887 ; infill
 G1 X92.040 Y129.985 E9.57637 ; infill
 G1 X93.621 Y129.985 E9.65199 ; infill
 G1 X93.621 Y129.410 E9.67949 ; infill
 G1 X92.044 Y129.410 E9.75493 ; infill
 G1 X92.047 Y128.835 E9.78243 ; infill
 G1 X93.621 Y128.835 E9.85770 ; infill
 G1 X93.621 Y128.260 E9.88520 ; infill
 G1 X92.051 Y128.260 E9.96029 ; infill
 G1 X92.055 Y127.685 E9.98780 ; infill
 G1 X93.621 Y127.685 E10.06271 ; infill
 G1 X93.621 Y127.109 E10.09021 ; infill
 G1 X92.058 Y127.109 E10.16495 ; infill
 G1 X92.062 Y126.534 E10.19245 ; infill
 G1 X93.621 Y126.534 E10.26701 ; infill
 G1 X93.621 Y125.959 E10.29451 ; infill
 G1 X92.066 Y125.959 E10.36890 ; infill
 G1 X92.069 Y125.384 E10.39640 ; infill
 G1 X93.621 Y125.384 E10.47061 ; infill
 G1 X93.621 Y124.809 E10.49811 ; infill
 G1 X92.073 Y124.809 E10.57214 ; infill
 G1 X92.077 Y124.234 E10.59965 ; infill
 G1 X93.621 Y124.234 E10.67350 ; infill
 G1 X93.621 Y123.659 E10.70100 ; infill
 G1 X92.081 Y123.659 E10.77469 ; infill
 G1 X92.084 Y123.084 E10.80219 ; infill
 G1 X93.621 Y123.084 E10.87569 ; infill
 G1 X93.621 Y122.509 E10.90319 ; infill
 G1 X92.088 Y122.509 E10.97652 ; infill
 G1 X92.092 Y121.934 E11.00402 ; infill
 G1 X92.472 Y121.934 E11.02219 ; infill
 G1 X91.703 Y119.744 F12000.000 ; move to first infill point
 G1 X91.491 Y119.308 E11.03659 F1800.000 ; infill
 G1 X91.388 Y118.357 E11.06499 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E10.83778 ; wipe and retract
 G1 F9600
 G1 X91.703 Y119.744 E10.72264 ; wipe and retract
 G1 E6.06499 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.400 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z3.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X105.107 Y121.240 F12000.000 ; move to first infill point
 G1 X105.494 Y121.240 E5.07167 F7200.000 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.930 E5.13770 F1800.000 ; infill
 G1 X105.579 Y117.930 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.15587 F1800.000 ; infill
 G1 X104.413 Y110.364 E5.36505 ; infill
 G1 X102.427 Y97.969 F12000.000 ; move to first infill point
 G1 X98.594 Y74.053 E6.88982 F1800.000 ; infill
 G1 X98.594 Y74.053 F12000.000 ; move to first infill point
 G1 X97.962 Y70.107 E7.00846 F1800.000 ; infill
 G1 F9600
 G1 X98.594 Y74.053 E6.05946 ; wipe and retract
 G1 E2.00846 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.400 F12000.000 ; lift Z
 G1 X94.601 Y66.058 F12000.000 ; move to first infill point
 G1 Z3.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X92.452 Y66.058 E5.12433 F7200.000 ; infill
 G1 X92.452 Y66.754 E5.16457 ; infill
 G1 X94.601 Y66.754 E5.28890 ; infill
 G1 X94.601 Y67.449 E5.32913 ; infill
 G1 X92.452 Y67.449 E5.45346 ; infill
 G1 X92.452 Y68.145 E5.49370 ; infill
 G1 X94.601 Y68.145 E5.61803 ; infill
 G1 X94.601 Y68.841 E5.65827 ; infill
 G1 X92.452 Y68.841 E5.78260 ; infill
 G1 F9600
 G1 X94.601 Y68.841 E5.27212 ; wipe and retract
 G1 F9600
 G1 X94.601 Y68.145 E5.10690 ; wipe and retract
 G1 F9600
 G1 X92.452 Y68.145 E4.59642 ; wipe and retract
 G1 F9600
 G1 X92.452 Y67.449 E4.43120 ; wipe and retract
 G1 F9600
 G1 X94.601 Y67.449 E3.92073 ; wipe and retract
 G1 F9600
 G1 X94.601 Y66.754 E3.75551 ; wipe and retract
 G1 F9600
 G1 X92.452 Y66.754 E3.24503 ; wipe and retract
 G1 F9600
 G1 X92.452 Y66.058 E3.07981 ; wipe and retract
 G1 F9600
 G1 X94.601 Y66.058 E2.56933 ; wipe and retract
 G1 E0.78260 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.400 F12000.000 ; lift Z
 G1 X96.608 Y62.145 F12000.000 ; move to first perimeter point
 G1 Z3.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X90.488 Y62.145 E5.18171 F7200.000 ; perimeter
 G1 X90.507 Y59.215 E5.26872 ; perimeter
 G1 X96.608 Y59.215 E5.44988 ; perimeter
 G1 X96.608 Y62.085 E5.53510 ; perimeter
 G1 X96.262 Y61.945 F12000.000 ; move inwards before travel
 G1 X96.251 Y61.788 F12000.000 ; move to first perimeter point
 G1 X90.847 Y61.788 E5.69554 F7200.000 ; perimeter
 G1 X90.862 Y59.572 E5.76135 ; perimeter
 G1 X96.251 Y59.572 E5.92137 ; perimeter
 G1 X96.251 Y61.728 E5.98539 ; perimeter
 G1 X95.894 Y61.431 F12000.000 ; move to first perimeter point
 G1 X91.207 Y61.431 E6.12455 F7200.000 ; perimeter
 G1 X91.216 Y59.929 E6.16915 ; perimeter
 G1 X95.894 Y59.929 E6.30804 ; perimeter
 G1 X95.894 Y61.371 E6.35085 ; perimeter
 G1 X95.537 Y61.074 F12000.000 ; move to first perimeter point
 G1 X91.566 Y61.074 E6.46875 F7200.000 ; perimeter
 G1 X91.571 Y60.286 E6.49214 ; perimeter
 G1 X95.537 Y60.286 E6.60989 ; perimeter
 G1 X95.537 Y61.014 E6.63150 ; perimeter
 G1 X95.358 Y60.680 F12000.000 ; move to first infill point
 G1 X91.747 Y60.680 E6.85883 F1800.000 ; infill
 G1 F9600
 G1 X95.358 Y60.680 E6.00119 ; wipe and retract
 G1 E1.85883 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.400 F12000.000 ; lift Z
 G1 X96.608 Y69.215 F12000.000 ; move to first perimeter point
 G1 Z3.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.811 Y69.215 E5.06541 F7200.000 ; perimeter
 G1 X107.942 Y123.815 E6.70907 ; perimeter
 G1 X95.608 Y123.815 E7.07527 ; perimeter
 G1 X95.608 Y132.215 E7.32468 ; perimeter
 G1 X109.346 Y132.215 E7.73258 ; perimeter
 G1 X109.992 Y136.074 E7.84876 ; perimeter
 G1 X109.992 Y137.923 E7.90365 ; perimeter
 G1 X109.148 Y139.531 E7.95757 ; perimeter
 G1 X107.653 Y140.562 E8.01149 ; perimeter
 G1 X105.814 Y140.785 E8.06651 ; perimeter
 G1 X93.363 Y140.785 E8.43620 ; perimeter
 G1 X91.653 Y140.137 E8.49050 ; perimeter
 G1 X90.449 Y138.778 E8.54441 ; perimeter
 G1 X90.008 Y136.991 E8.59905 ; perimeter
 G1 X90.478 Y63.739 E10.77404 ; perimeter
 G1 X96.608 Y63.739 E10.95606 ; perimeter
 G1 X96.608 Y69.155 E11.11685 ; perimeter
 G1 X96.608 Y69.615 F12000.000 ; move inwards before travel
 G1 X96.251 Y69.572 F12000.000 ; move to first perimeter point
 G1 X98.509 Y69.572 E11.18389 F7200.000 ; perimeter
 G1 X107.520 Y123.458 E12.80604 ; perimeter
 G1 X95.251 Y123.458 E13.17033 ; perimeter
 G1 X95.251 Y132.572 E13.44094 ; perimeter
 G1 X98.451 Y132.572 E13.53595 ; perimeter
 G1 X98.451 Y136.372 E13.64878 ; perimeter
 G1 X105.165 Y136.372 E13.84813 ; perimeter
 G1 X105.165 Y132.572 E13.96095 ; perimeter
 G1 X109.044 Y132.572 E14.07613 ; perimeter
 G1 X109.635 Y136.104 E14.18245 ; perimeter
 G1 X109.635 Y137.835 E14.23384 ; perimeter
 G1 X108.873 Y139.287 E14.28254 ; perimeter
 G1 X107.523 Y140.218 E14.33123 ; perimeter
 G1 X105.792 Y140.428 E14.38299 ; perimeter
 G1 X93.428 Y140.428 E14.75010 ; perimeter
 G1 X91.862 Y139.834 E14.79984 ; perimeter
 G1 X90.774 Y138.607 E14.84853 ; perimeter
 G1 X90.366 Y136.949 E14.89924 ; perimeter
 G1 X90.833 Y64.096 E17.06237 ; perimeter
 G1 X96.251 Y64.096 E17.22325 ; perimeter
 G1 X96.251 Y69.512 E17.38404 ; perimeter
 G1 X95.894 Y69.929 F12000.000 ; move to first perimeter point
 G1 X98.206 Y69.929 E17.45270 F7200.000 ; perimeter
 G1 X107.098 Y123.100 E19.05336 ; perimeter
 G1 X94.894 Y123.100 E19.41572 ; perimeter
 G1 X94.894 Y132.929 E19.70754 ; perimeter
 G1 X98.094 Y132.929 E19.80255 ; perimeter
 G1 X98.094 Y136.729 E19.91538 ; perimeter
 G1 X105.522 Y136.729 E20.13593 ; perimeter
 G1 X105.522 Y132.929 E20.24876 ; perimeter
 G1 X108.742 Y132.929 E20.34435 ; perimeter
 G1 X109.278 Y136.133 E20.44082 ; perimeter
 G1 X109.278 Y137.747 E20.48872 ; perimeter
 G1 X108.597 Y139.043 E20.53219 ; perimeter
 G1 X107.393 Y139.874 E20.57565 ; perimeter
 G1 X105.771 Y140.071 E20.62416 ; perimeter
 G1 X93.493 Y140.071 E20.98869 ; perimeter
 G1 X92.071 Y139.532 E21.03387 ; perimeter
 G1 X91.100 Y138.436 E21.07733 ; perimeter
 G1 X90.723 Y136.906 E21.12410 ; perimeter
 G1 X91.187 Y64.453 E23.27538 ; perimeter
 G1 X95.894 Y64.453 E23.41512 ; perimeter
 G1 X95.894 Y69.869 E23.57591 ; perimeter
 G1 X91.819 Y69.943 F12000.000 ; move to first perimeter point
 G1 X91.536 Y118.153 E25.00734 F7200.000 ; perimeter
 G1 X91.886 Y119.700 E25.05444 ; perimeter
 G1 X92.975 Y121.041 E25.10573 ; perimeter
 G1 X94.490 Y121.668 E25.15444 ; perimeter
 G1 X101.702 Y121.668 E25.36855 ; perimeter
 G1 X103.161 Y121.475 E25.41226 ; perimeter
 G1 X104.541 Y120.436 E25.46356 ; perimeter
 G1 X105.290 Y118.879 E25.51486 ; perimeter
 G1 X105.290 Y117.343 E25.56045 ; perimeter
 G1 X102.350 Y98.162 E26.13662 ; perimeter
 G1 X102.560 Y98.128 E26.14294 ; perimeter
 G1 X106.677 Y122.743 E26.88393 ; perimeter
 G1 X94.537 Y122.743 E27.24437 ; perimeter
 G1 X94.537 Y133.286 E27.55739 ; perimeter
 G1 X97.737 Y133.286 E27.65241 ; perimeter
 G1 X97.737 Y137.086 E27.76523 ; perimeter
 G1 X105.879 Y137.086 E28.00699 ; perimeter
 G1 X105.879 Y133.286 E28.11982 ; perimeter
 G1 X108.440 Y133.286 E28.19584 ; perimeter
 G1 X108.921 Y136.163 E28.28245 ; perimeter
 G1 X108.921 Y137.659 E28.32685 ; perimeter
 G1 X108.322 Y138.799 E28.36509 ; perimeter
 G1 X107.262 Y139.530 E28.40333 ; perimeter
 G1 X105.749 Y139.714 E28.44859 ; perimeter
 G1 X93.559 Y139.714 E28.81053 ; perimeter
 G1 X92.280 Y139.229 E28.85115 ; perimeter
 G1 X91.426 Y138.265 E28.88939 ; perimeter
 G1 X91.080 Y136.864 E28.93223 ; perimeter
 G1 X91.542 Y64.810 E31.07165 ; perimeter
 G1 X95.537 Y64.810 E31.19025 ; perimeter
 G1 X95.537 Y69.943 E31.34266 ; perimeter
 G1 X91.879 Y69.943 E31.45126 ; perimeter
 G1 X91.869 Y69.586 F12000.000 ; move to first perimeter point
 G1 X91.897 Y65.167 E31.58246 F7200.000 ; perimeter
 G1 X95.180 Y65.167 E31.67993 ; perimeter
 G1 X95.180 Y69.586 E31.81113 ; perimeter
 G1 X91.929 Y69.586 E31.90766 ; perimeter
 G1 X92.228 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.252 Y65.524 E32.01766 F7200.000 ; perimeter
 G1 X94.823 Y65.524 E32.09399 ; perimeter
 G1 X94.823 Y69.229 E32.20399 ; perimeter
 G1 X92.288 Y69.229 E32.27925 ; perimeter
 G1 F9600
 G1 X92.252 Y65.524 E31.39934 ; wipe and retract
 G1 F9600
 G1 X94.823 Y65.524 E30.78875 ; wipe and retract
 G1 F9600
 G1 X94.823 Y69.229 E29.90888 ; wipe and retract
 G1 F9600
 G1 X92.288 Y69.229 E29.30690 ; wipe and retract
 G1 E27.27925 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.600 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z3.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X106.236 Y137.443 E5.80503 ; perimeter
 G1 X106.236 Y133.643 E5.91785 ; perimeter
 G1 X108.137 Y133.643 E5.97429 ; perimeter
 G1 X108.564 Y136.193 E6.05104 ; perimeter
 G1 X108.564 Y137.571 E6.09196 ; perimeter
 G1 X108.047 Y138.555 E6.12497 ; perimeter
 G1 X107.132 Y139.187 E6.15798 ; perimeter
 G1 X105.728 Y139.357 E6.19998 ; perimeter
 G1 X93.624 Y139.357 E6.55934 ; perimeter
 G1 X92.488 Y138.926 E6.59541 ; perimeter
 G1 X91.751 Y138.094 E6.62842 ; perimeter
 G1 X91.438 Y136.822 E6.66732 ; perimeter
 G1 X91.546 Y119.849 E7.17128 ; perimeter
 G1 X92.754 Y121.337 E7.22818 ; perimeter
 G1 X94.419 Y122.025 E7.28168 ; perimeter
 G1 X101.725 Y122.025 E7.49860 ; perimeter
 G1 X103.301 Y121.817 E7.54579 ; perimeter
 G1 X104.825 Y120.669 E7.60245 ; perimeter
 G1 X105.561 Y119.141 E7.65279 ; perimeter
 G1 X105.716 Y119.163 E7.65745 ; perimeter
 G1 X106.255 Y122.386 E7.75447 ; perimeter
 G1 X94.240 Y122.386 E8.11121 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E8.11579 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E8.16422 ; perimeter
 G1 X105.394 Y120.311 E8.18370 ; perimeter
 G1 X105.549 Y120.333 E8.18835 ; perimeter
 G1 X105.833 Y122.029 E8.23942 ; perimeter
 G1 X103.916 Y122.029 E8.29635 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E8.25304 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.86568 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E7.70986 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E7.67261 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E7.26411 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.80871 ; wipe and retract
 G1 E3.29635 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.600 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z3.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X106.593 Y137.800 E5.49201 ; perimeter
 G1 X106.593 Y134.000 E5.60483 ; perimeter
 G1 X107.835 Y134.000 E5.64169 ; perimeter
 G1 X108.207 Y136.222 E5.70859 ; perimeter
 G1 X108.207 Y137.482 E5.74601 ; perimeter
 G1 X107.772 Y138.311 E5.77380 ; perimeter
 G1 X107.001 Y138.843 E5.80158 ; perimeter
 G1 X105.706 Y139.000 E5.84033 ; perimeter
 G1 X93.690 Y139.000 E6.19710 ; perimeter
 G1 X92.697 Y138.624 E6.22862 ; perimeter
 G1 X92.077 Y137.923 E6.25640 ; perimeter
 G1 X91.795 Y136.780 E6.29137 ; perimeter
 G1 X91.897 Y120.847 E6.76443 ; perimeter
 G1 X92.534 Y121.632 E6.79444 ; perimeter
 G1 X93.823 Y122.165 E6.83584 ; perimeter
 G1 X93.823 Y133.940 E7.18545 ; perimeter
 G1 F9600
 G1 X97.023 Y134.000 E6.42532 ; wipe and retract
 G1 F9600
 G1 X97.023 Y137.800 E5.52282 ; wipe and retract
 G1 F9600
 G1 X106.593 Y137.800 E3.24976 ; wipe and retract
 G1 F9600
 G1 X106.593 Y134.371 E2.43545 ; wipe and retract
 G1 E2.18545 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.600 F12000.000 ; lift Z
 G1 X92.884 Y71.015 F12000.000 ; move to first perimeter point
 G1 Z3.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.105 Y71.015 E5.12531 F7200.000 ; perimeter
 G1 X104.219 Y117.425 E6.51939 ; perimeter
 G1 X104.219 Y118.635 E6.55531 ; perimeter
 G1 X103.689 Y119.737 E6.59162 ; perimeter
 G1 X102.742 Y120.450 E6.62683 ; perimeter
 G1 X101.631 Y120.597 E6.66009 ; perimeter
 G1 X94.703 Y120.597 E6.86579 ; perimeter
 G1 X93.635 Y120.155 E6.90011 ; perimeter
 G1 X92.875 Y119.220 E6.93589 ; perimeter
 G1 X92.608 Y118.036 E6.97191 ; perimeter
 G1 X92.884 Y71.075 E8.36629 ; perimeter
 G1 X92.885 Y70.615 F12000.000 ; move inwards before travel
 G1 X92.529 Y70.658 F12000.000 ; move to first perimeter point
 G1 X97.411 Y70.658 E8.51124 F7200.000 ; perimeter
 G1 X104.576 Y117.398 E9.91523 ; perimeter
 G1 X104.576 Y118.716 E9.95438 ; perimeter
 G1 X103.973 Y119.970 E9.99568 ; perimeter
 G1 X102.881 Y120.792 E10.03626 ; perimeter
 G1 X101.655 Y120.954 E10.07300 ; perimeter
 G1 X94.632 Y120.954 E10.28150 ; perimeter
 G1 X93.415 Y120.451 E10.32062 ; perimeter
 G1 X92.545 Y119.380 E10.36157 ; perimeter
 G1 X92.251 Y118.075 E10.40129 ; perimeter
 G1 X92.529 Y70.718 E11.80742 ; perimeter
 G1 X92.174 Y70.300 F12000.000 ; move to first perimeter point
 G1 X97.718 Y70.300 E11.97201 F7200.000 ; perimeter
 G1 X104.933 Y117.371 E13.38591 ; perimeter
 G1 X104.933 Y118.797 E13.42828 ; perimeter
 G1 X104.257 Y120.203 E13.47458 ; perimeter
 G1 X103.021 Y121.133 E13.52051 ; perimeter
 G1 X101.678 Y121.311 E13.56074 ; perimeter
 G1 X94.561 Y121.311 E13.77205 ; perimeter
 G1 X93.195 Y120.746 E13.81596 ; perimeter
 G1 X92.216 Y119.540 E13.86208 ; perimeter
 G1 X91.893 Y118.114 E13.90549 ; perimeter
 G1 X92.174 Y70.360 E15.32338 ; perimeter
 G1 F9600
 G1 X97.718 Y70.300 E14.00664 ; wipe and retract
 G1 F9600
 G1 X99.908 Y84.589 E10.57338 ; wipe and retract
 G1 E10.32338 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.600 F12000.000 ; lift Z
 G1 X98.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z3.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X104.808 Y133.015 E5.17815 F7200.000 ; perimeter
 G1 X104.808 Y136.015 E5.26722 ; perimeter
 G1 X98.808 Y136.015 E5.44537 ; perimeter
 G1 X98.808 Y133.075 E5.53266 ; perimeter
 G1 X98.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X104.987 Y132.615 E5.93285 F1800.000 ; infill
 G1 X107.260 Y134.201 F12000.000 ; move to first infill point
 G1 X107.260 Y138.384 E6.12703 F7200.000 ; infill
 G1 X106.701 Y138.675 E6.15627 ; infill
 G1 X106.701 Y138.001 E6.18755 ; infill
 G1 X106.143 Y138.001 E6.21347 ; infill
 G1 X106.143 Y138.743 E6.24790 ; infill
 G1 X105.585 Y138.779 E6.27388 ; infill
 G1 X105.585 Y138.001 E6.30996 ; infill
 G1 X105.026 Y138.001 E6.33589 ; infill
 G1 X105.026 Y138.779 E6.37197 ; infill
 G1 X104.468 Y138.779 E6.39790 ; infill
 G1 X104.468 Y138.001 E6.43398 ; infill
 G1 X103.909 Y138.001 E6.45991 ; infill
 G1 X103.909 Y138.779 E6.49599 ; infill
 G1 X103.351 Y138.779 E6.52192 ; infill
 G1 X103.351 Y138.001 E6.55800 ; infill
 G1 X102.793 Y138.001 E6.58393 ; infill
 G1 X102.793 Y138.779 E6.62001 ; infill
 G1 X102.234 Y138.779 E6.64594 ; infill
 G1 X102.234 Y138.001 E6.68202 ; infill
 G1 X101.676 Y138.001 E6.70795 ; infill
 G1 X101.676 Y138.779 E6.74403 ; infill
 G1 X101.118 Y138.779 E6.76996 ; infill
 G1 X101.118 Y138.001 E6.80604 ; infill
 G1 X100.559 Y138.001 E6.83197 ; infill
 G1 X100.559 Y138.779 E6.86805 ; infill
 G1 X100.001 Y138.779 E6.89398 ; infill
 G1 X100.001 Y138.001 E6.93006 ; infill
 G1 X99.443 Y138.001 E6.95599 ; infill
 G1 X99.443 Y138.779 E6.99208 ; infill
 G1 X98.884 Y138.779 E7.01800 ; infill
 G1 X98.884 Y138.001 E7.05409 ; infill
 G1 X98.326 Y138.001 E7.08001 ; infill
 G1 X98.326 Y138.779 E7.11610 ; infill
 G1 X97.767 Y138.779 E7.14202 ; infill
 G1 X97.767 Y138.001 E7.17810 ; infill
 G1 X97.209 Y138.001 E7.20403 ; infill
 G1 X97.209 Y138.779 E7.24011 ; infill
 G1 X96.651 Y138.779 E7.26604 ; infill
 G1 X96.651 Y134.201 E7.47855 ; infill
 G1 X96.092 Y134.201 E7.50448 ; infill
 G1 X96.092 Y138.779 E7.71699 ; infill
 G1 X95.534 Y138.779 E7.74291 ; infill
 G1 X95.534 Y134.201 E7.95542 ; infill
 G1 X94.976 Y134.201 E7.98135 ; infill
 G1 X94.976 Y138.779 E8.19386 ; infill
 G1 X94.417 Y138.779 E8.21978 ; infill
 G1 X94.417 Y134.201 E8.43230 ; infill
 G1 X93.859 Y134.201 E8.45822 ; infill
 G1 X93.859 Y138.779 E8.67073 ; infill
 G1 X93.301 Y138.625 E8.69762 ; infill
 G1 X93.301 Y122.181 E9.46111 ; infill
 G1 X92.742 Y121.950 E9.48917 ; infill
 G1 X92.742 Y138.286 E10.24761 ; infill
 G1 X92.184 Y136.984 F12000.000 ; move to first infill point
 G1 X92.184 Y133.450 E10.41173 F7200.000 ; infill
 G1 F9600
 G1 X92.184 Y136.984 E9.57222 ; wipe and retract
 G1 E5.41173 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.600 F12000.000 ; lift Z
 G1 X107.818 Y135.966 F12000.000 ; move to first infill point
 G1 Z3.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X107.818 Y137.597 E5.07572 F7200.000 ; infill
 G1 F9600
 G1 X107.818 Y135.966 E4.68840 ; wipe and retract
 G1 E0.07572 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.600 F12000.000 ; lift Z
 G1 X91.703 Y119.744 F12000.000 ; move to first infill point
 G1 Z3.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.491 Y119.308 E5.01440 F1800.000 ; infill
 G1 X91.388 Y118.357 E5.04280 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E4.81559 ; wipe and retract
 G1 F9600
 G1 X91.703 Y119.744 E4.70044 ; wipe and retract
 G1 E0.04280 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.600 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z3.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X104.774 Y121.808 F12000.000 ; move to first infill point
 G1 X104.774 Y121.449 E5.07163 F7200.000 ; infill
 G1 X105.374 Y121.352 E5.10194 ; infill
 G1 X105.374 Y121.808 E5.12466 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.930 E5.19070 F1800.000 ; infill
 G1 X105.579 Y117.930 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.20887 F1800.000 ; infill
 G1 X104.413 Y110.364 E5.41805 ; infill
 G1 X102.427 Y97.969 F12000.000 ; move to first infill point
 G1 X98.594 Y74.053 E6.94282 F1800.000 ; infill
 G1 X98.594 Y74.053 F12000.000 ; move to first infill point
 G1 X97.962 Y70.107 E7.06146 F1800.000 ; infill
 G1 X94.434 Y69.008 F12000.000 ; move to first infill point
 G1 X94.434 Y65.746 E7.22557 F7200.000 ; infill
 G1 X93.829 Y65.746 E7.25600 ; infill
 G1 X93.829 Y69.008 E7.42011 ; infill
 G1 X93.224 Y69.008 E7.45055 ; infill
 G1 X93.224 Y65.746 E7.61466 ; infill
 G1 X92.619 Y65.746 E7.64510 ; infill
 G1 X92.619 Y69.008 E7.80921 ; infill
 G1 F9600
 G1 X92.619 Y65.746 E7.03450 ; wipe and retract
 G1 F9600
 G1 X93.224 Y65.746 E6.89080 ; wipe and retract
 G1 F9600
 G1 X93.224 Y69.008 E6.11608 ; wipe and retract
 G1 F9600
 G1 X93.829 Y69.008 E5.97239 ; wipe and retract
 G1 F9600
 G1 X93.829 Y65.746 E5.19767 ; wipe and retract
 G1 F9600
 G1 X94.434 Y65.746 E5.05398 ; wipe and retract
 G1 F9600
 G1 X94.434 Y69.008 E4.27926 ; wipe and retract
 G1 E2.80921 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.600 F12000.000 ; lift Z
 G1 X96.608 Y62.290 F12000.000 ; move to first perimeter point
 G1 Z3.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X90.487 Y62.290 E5.18174 F7200.000 ; perimeter
 G1 X90.507 Y59.215 E5.27306 ; perimeter
 G1 X96.608 Y59.215 E5.45421 ; perimeter
 G1 X96.608 Y62.230 E5.54375 ; perimeter
 G1 X96.262 Y62.090 F12000.000 ; move inwards before travel
 G1 X96.251 Y61.933 F12000.000 ; move to first perimeter point
 G1 X90.846 Y61.933 E5.70421 F7200.000 ; perimeter
 G1 X90.862 Y59.572 E5.77433 ; perimeter
 G1 X96.251 Y59.572 E5.93435 ; perimeter
 G1 X96.251 Y61.873 E6.00268 ; perimeter
 G1 X95.894 Y61.576 F12000.000 ; move to first perimeter point
 G1 X91.206 Y61.576 E6.14187 F7200.000 ; perimeter
 G1 X91.216 Y59.929 E6.19078 ; perimeter
 G1 X95.894 Y59.929 E6.32966 ; perimeter
 G1 X95.894 Y61.516 E6.37679 ; perimeter
 G1 X95.537 Y61.219 F12000.000 ; move to first perimeter point
 G1 X91.565 Y61.219 E6.49471 F7200.000 ; perimeter
 G1 X91.571 Y60.286 E6.52241 ; perimeter
 G1 X95.537 Y60.286 E6.64016 ; perimeter
 G1 X95.537 Y61.159 E6.66608 ; perimeter
 G1 X95.180 Y60.862 F12000.000 ; move to first perimeter point
 G1 X91.925 Y60.862 E6.76273 F7200.000 ; perimeter
 G1 X91.926 Y60.643 E6.76923 ; perimeter
 G1 X95.180 Y60.643 E6.86584 ; perimeter
 G1 X95.180 Y60.802 E6.87055 ; perimeter
 G1 F9600
 G1 X91.925 Y60.862 E6.09732 ; wipe and retract
 G1 F9600
 G1 X91.926 Y60.643 E6.04534 ; wipe and retract
 G1 F9600
 G1 X95.180 Y60.643 E5.27256 ; wipe and retract
 G1 F9600
 G1 X95.180 Y60.802 E5.23483 ; wipe and retract
 G1 E1.87055 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.600 F12000.000 ; lift Z
 G1 Z3.600 F12000.000 ; move to next layer (30)
 M106 S234.6 ; enable fan
 G1 Z4.600 F12000.000 ; lift Z
 G1 X96.608 Y69.215 F12000.000 ; move to first perimeter point
 G1 Z3.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.811 Y69.215 E5.06541 F7200.000 ; perimeter
 G1 X107.942 Y123.815 E6.70907 ; perimeter
 G1 X95.608 Y123.815 E7.07527 ; perimeter
 G1 X95.608 Y132.215 E7.32468 ; perimeter
 G1 X109.346 Y132.215 E7.73258 ; perimeter
 G1 X109.992 Y136.074 E7.84876 ; perimeter
 G1 X109.992 Y137.923 E7.90365 ; perimeter
 G1 X109.148 Y139.531 E7.95757 ; perimeter
 G1 X107.653 Y140.562 E8.01149 ; perimeter
 G1 X105.814 Y140.785 E8.06651 ; perimeter
 G1 X93.363 Y140.785 E8.43620 ; perimeter
 G1 X91.653 Y140.137 E8.49050 ; perimeter
 G1 X90.449 Y138.778 E8.54441 ; perimeter
 G1 X90.008 Y136.991 E8.59905 ; perimeter
 G1 X90.480 Y63.401 E10.78408 ; perimeter
 G1 X96.608 Y63.401 E10.96603 ; perimeter
 G1 X96.608 Y69.155 E11.13685 ; perimeter
 G1 X96.608 Y69.615 F12000.000 ; move inwards before travel
 G1 X96.251 Y69.572 F12000.000 ; move to first perimeter point
 G1 X98.509 Y69.572 E11.20389 F7200.000 ; perimeter
 G1 X107.520 Y123.458 E12.82605 ; perimeter
 G1 X95.251 Y123.458 E13.19033 ; perimeter
 G1 X95.251 Y132.572 E13.46094 ; perimeter
 G1 X98.451 Y132.572 E13.55595 ; perimeter
 G1 X98.451 Y136.372 E13.66878 ; perimeter
 G1 X105.165 Y136.372 E13.86813 ; perimeter
 G1 X105.165 Y132.572 E13.98096 ; perimeter
 G1 X109.044 Y132.572 E14.09613 ; perimeter
 G1 X109.635 Y136.104 E14.20245 ; perimeter
 G1 X109.635 Y137.835 E14.25385 ; perimeter
 G1 X108.873 Y139.287 E14.30254 ; perimeter
 G1 X107.523 Y140.218 E14.35123 ; perimeter
 G1 X105.792 Y140.428 E14.40300 ; perimeter
 G1 X93.428 Y140.428 E14.77011 ; perimeter
 G1 X91.862 Y139.834 E14.81984 ; perimeter
 G1 X90.774 Y138.607 E14.86853 ; perimeter
 G1 X90.366 Y136.949 E14.91924 ; perimeter
 G1 X90.835 Y63.758 E17.09240 ; perimeter
 G1 X96.251 Y63.758 E17.25322 ; perimeter
 G1 X96.251 Y69.512 E17.42405 ; perimeter
 G1 X95.894 Y69.929 F12000.000 ; move to first perimeter point
 G1 X98.206 Y69.929 E17.49271 F7200.000 ; perimeter
 G1 X107.098 Y123.100 E19.09337 ; perimeter
 G1 X94.894 Y123.100 E19.45573 ; perimeter
 G1 X94.894 Y132.929 E19.74754 ; perimeter
 G1 X98.094 Y132.929 E19.84256 ; perimeter
 G1 X98.094 Y136.729 E19.95538 ; perimeter
 G1 X105.522 Y136.729 E20.17594 ; perimeter
 G1 X105.522 Y132.929 E20.28877 ; perimeter
 G1 X108.742 Y132.929 E20.38436 ; perimeter
 G1 X109.278 Y136.133 E20.48082 ; perimeter
 G1 X109.278 Y137.747 E20.52873 ; perimeter
 G1 X108.597 Y139.043 E20.57219 ; perimeter
 G1 X107.393 Y139.874 E20.61566 ; perimeter
 G1 X105.771 Y140.071 E20.66417 ; perimeter
 G1 X93.493 Y140.071 E21.02869 ; perimeter
 G1 X92.071 Y139.532 E21.07388 ; perimeter
 G1 X91.100 Y138.436 E21.11734 ; perimeter
 G1 X90.723 Y136.906 E21.16411 ; perimeter
 G1 X91.190 Y64.115 E23.32542 ; perimeter
 G1 X95.894 Y64.115 E23.46510 ; perimeter
 G1 X95.894 Y69.869 E23.63592 ; perimeter
 G1 X91.819 Y69.943 F12000.000 ; move to first perimeter point
 G1 X91.536 Y118.153 E25.06735 F7200.000 ; perimeter
 G1 X91.886 Y119.700 E25.11445 ; perimeter
 G1 X92.975 Y121.041 E25.16574 ; perimeter
 G1 X94.490 Y121.668 E25.21445 ; perimeter
 G1 X101.702 Y121.668 E25.42856 ; perimeter
 G1 X103.161 Y121.475 E25.47227 ; perimeter
 G1 X104.541 Y120.436 E25.52357 ; perimeter
 G1 X105.290 Y118.879 E25.57487 ; perimeter
 G1 X105.290 Y117.343 E25.62046 ; perimeter
 G1 X102.350 Y98.162 E26.19663 ; perimeter
 G1 X102.560 Y98.128 E26.20295 ; perimeter
 G1 X106.677 Y122.743 E26.94394 ; perimeter
 G1 X94.537 Y122.743 E27.30439 ; perimeter
 G1 X94.537 Y133.286 E27.61741 ; perimeter
 G1 X97.737 Y133.286 E27.71242 ; perimeter
 G1 X97.737 Y137.086 E27.82525 ; perimeter
 G1 X105.879 Y137.086 E28.06701 ; perimeter
 G1 X105.879 Y133.286 E28.17983 ; perimeter
 G1 X108.440 Y133.286 E28.25585 ; perimeter
 G1 X108.921 Y136.163 E28.34246 ; perimeter
 G1 X108.921 Y137.659 E28.38686 ; perimeter
 G1 X108.322 Y138.799 E28.42510 ; perimeter
 G1 X107.262 Y139.530 E28.46334 ; perimeter
 G1 X105.749 Y139.714 E28.50860 ; perimeter
 G1 X93.559 Y139.714 E28.87054 ; perimeter
 G1 X92.280 Y139.229 E28.91117 ; perimeter
 G1 X91.426 Y138.265 E28.94940 ; perimeter
 G1 X91.080 Y136.864 E28.99224 ; perimeter
 G1 X91.544 Y64.472 E31.14169 ; perimeter
 G1 X95.537 Y64.472 E31.26023 ; perimeter
 G1 X95.537 Y69.943 E31.42267 ; perimeter
 G1 X91.879 Y69.943 E31.53127 ; perimeter
 G1 X91.869 Y69.586 F12000.000 ; move to first perimeter point
 G1 X91.899 Y64.829 E31.67251 F7200.000 ; perimeter
 G1 X95.180 Y64.829 E31.76991 ; perimeter
 G1 X95.180 Y69.586 E31.91115 ; perimeter
 G1 X91.929 Y69.586 E32.00768 ; perimeter
 G1 X92.228 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.254 Y65.187 E32.12771 F7200.000 ; perimeter
 G1 X94.823 Y65.187 E32.20398 ; perimeter
 G1 X94.823 Y69.229 E32.32401 ; perimeter
 G1 X92.288 Y69.229 E32.39927 ; perimeter
 G1 F9600
 G1 X92.254 Y65.187 E31.43911 ; wipe and retract
 G1 F9600
 G1 X94.823 Y65.187 E30.82903 ; wipe and retract
 G1 F9600
 G1 X94.823 Y69.229 E29.86890 ; wipe and retract
 G1 F9600
 G1 X92.288 Y69.229 E29.26693 ; wipe and retract
 G1 E27.39927 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.800 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z3.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X106.236 Y137.443 E5.80503 ; perimeter
 G1 X106.236 Y133.643 E5.91785 ; perimeter
 G1 X108.137 Y133.643 E5.97429 ; perimeter
 G1 X108.564 Y136.193 E6.05104 ; perimeter
 G1 X108.564 Y137.571 E6.09196 ; perimeter
 G1 X108.047 Y138.555 E6.12497 ; perimeter
 G1 X107.132 Y139.187 E6.15798 ; perimeter
 G1 X105.728 Y139.357 E6.19998 ; perimeter
 G1 X93.624 Y139.357 E6.55934 ; perimeter
 G1 X92.488 Y138.926 E6.59541 ; perimeter
 G1 X91.751 Y138.094 E6.62842 ; perimeter
 G1 X91.438 Y136.822 E6.66732 ; perimeter
 G1 X91.546 Y119.849 E7.17128 ; perimeter
 G1 X92.754 Y121.337 E7.22818 ; perimeter
 G1 X94.419 Y122.025 E7.28168 ; perimeter
 G1 X101.725 Y122.025 E7.49860 ; perimeter
 G1 X103.301 Y121.817 E7.54579 ; perimeter
 G1 X104.825 Y120.669 E7.60245 ; perimeter
 G1 X105.561 Y119.141 E7.65279 ; perimeter
 G1 X105.716 Y119.163 E7.65745 ; perimeter
 G1 X106.255 Y122.386 E7.75447 ; perimeter
 G1 X94.240 Y122.386 E8.11121 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E8.11579 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E8.16422 ; perimeter
 G1 X105.394 Y120.311 E8.18370 ; perimeter
 G1 X105.549 Y120.333 E8.18835 ; perimeter
 G1 X105.833 Y122.029 E8.23942 ; perimeter
 G1 X103.916 Y122.029 E8.29635 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E8.25304 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.86568 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E7.70986 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E7.67261 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E7.26411 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.80871 ; wipe and retract
 G1 E3.29635 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.800 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z3.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X106.593 Y137.800 E5.49201 ; perimeter
 G1 X106.593 Y134.000 E5.60483 ; perimeter
 G1 X107.835 Y134.000 E5.64169 ; perimeter
 G1 X108.207 Y136.222 E5.70859 ; perimeter
 G1 X108.207 Y137.482 E5.74601 ; perimeter
 G1 X107.772 Y138.311 E5.77380 ; perimeter
 G1 X107.001 Y138.843 E5.80158 ; perimeter
 G1 X105.706 Y139.000 E5.84033 ; perimeter
 G1 X93.690 Y139.000 E6.19710 ; perimeter
 G1 X92.697 Y138.624 E6.22862 ; perimeter
 G1 X92.077 Y137.923 E6.25640 ; perimeter
 G1 X91.795 Y136.780 E6.29137 ; perimeter
 G1 X91.897 Y120.847 E6.76443 ; perimeter
 G1 X92.534 Y121.632 E6.79444 ; perimeter
 G1 X93.823 Y122.165 E6.83584 ; perimeter
 G1 X93.823 Y133.940 E7.18545 ; perimeter
 G1 F9600
 G1 X97.023 Y134.000 E6.42532 ; wipe and retract
 G1 F9600
 G1 X97.023 Y137.800 E5.52282 ; wipe and retract
 G1 F9600
 G1 X106.593 Y137.800 E3.24976 ; wipe and retract
 G1 F9600
 G1 X106.593 Y134.371 E2.43545 ; wipe and retract
 G1 E2.18545 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.800 F12000.000 ; lift Z
 G1 X92.884 Y71.015 F12000.000 ; move to first perimeter point
 G1 Z3.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.105 Y71.015 E5.12531 F7200.000 ; perimeter
 G1 X104.219 Y117.425 E6.51939 ; perimeter
 G1 X104.219 Y118.635 E6.55531 ; perimeter
 G1 X103.689 Y119.737 E6.59162 ; perimeter
 G1 X102.742 Y120.450 E6.62683 ; perimeter
 G1 X101.631 Y120.597 E6.66009 ; perimeter
 G1 X94.703 Y120.597 E6.86579 ; perimeter
 G1 X93.635 Y120.155 E6.90011 ; perimeter
 G1 X92.875 Y119.220 E6.93589 ; perimeter
 G1 X92.608 Y118.036 E6.97191 ; perimeter
 G1 X92.884 Y71.075 E8.36629 ; perimeter
 G1 X92.885 Y70.615 F12000.000 ; move inwards before travel
 G1 X92.529 Y70.658 F12000.000 ; move to first perimeter point
 G1 X97.411 Y70.658 E8.51124 F7200.000 ; perimeter
 G1 X104.576 Y117.398 E9.91523 ; perimeter
 G1 X104.576 Y118.716 E9.95438 ; perimeter
 G1 X103.973 Y119.970 E9.99568 ; perimeter
 G1 X102.881 Y120.792 E10.03626 ; perimeter
 G1 X101.655 Y120.954 E10.07300 ; perimeter
 G1 X94.632 Y120.954 E10.28150 ; perimeter
 G1 X93.415 Y120.451 E10.32062 ; perimeter
 G1 X92.545 Y119.380 E10.36157 ; perimeter
 G1 X92.251 Y118.075 E10.40129 ; perimeter
 G1 X92.529 Y70.718 E11.80742 ; perimeter
 G1 X92.174 Y70.300 F12000.000 ; move to first perimeter point
 G1 X97.718 Y70.300 E11.97201 F7200.000 ; perimeter
 G1 X104.933 Y117.371 E13.38591 ; perimeter
 G1 X104.933 Y118.797 E13.42828 ; perimeter
 G1 X104.257 Y120.203 E13.47458 ; perimeter
 G1 X103.021 Y121.133 E13.52051 ; perimeter
 G1 X101.678 Y121.311 E13.56074 ; perimeter
 G1 X94.561 Y121.311 E13.77205 ; perimeter
 G1 X93.195 Y120.746 E13.81596 ; perimeter
 G1 X92.216 Y119.540 E13.86208 ; perimeter
 G1 X91.893 Y118.114 E13.90549 ; perimeter
 G1 X92.174 Y70.360 E15.32338 ; perimeter
 G1 F9600
 G1 X97.718 Y70.300 E14.00664 ; wipe and retract
 G1 F9600
 G1 X99.908 Y84.589 E10.57338 ; wipe and retract
 G1 E10.32338 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.800 F12000.000 ; lift Z
 G1 X98.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z3.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X104.808 Y133.015 E5.17815 F7200.000 ; perimeter
 G1 X104.808 Y136.015 E5.26722 ; perimeter
 G1 X98.808 Y136.015 E5.44537 ; perimeter
 G1 X98.808 Y133.075 E5.53266 ; perimeter
 G1 X98.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X104.987 Y132.615 E5.93285 F1800.000 ; infill
 G1 X107.726 Y134.586 F12000.000 ; move to first infill point
 G1 X106.795 Y134.586 E5.97739 F7200.000 ; infill
 G1 X106.795 Y135.161 E6.00489 ; infill
 G1 X107.823 Y135.161 E6.05403 ; infill
 G1 X107.919 Y135.736 E6.08192 ; infill
 G1 X106.795 Y135.736 E6.13566 ; infill
 G1 X106.795 Y136.311 E6.16316 ; infill
 G1 X107.985 Y136.311 E6.22008 ; infill
 G1 X107.985 Y136.886 E6.24758 ; infill
 G1 X106.795 Y136.886 E6.30450 ; infill
 G1 X106.795 Y137.461 E6.33200 ; infill
 G1 X107.969 Y137.461 E6.38812 ; infill
 G1 X107.667 Y138.036 E6.41918 ; infill
 G1 X106.795 Y138.036 E6.46087 ; infill
 G1 X106.015 Y138.612 E6.50720 ; infill
 G1 X93.538 Y138.612 E7.10389 ; infill
 G1 X96.821 Y138.036 F12000.000 ; move to first infill point
 G1 X92.502 Y138.036 E7.31042 F7200.000 ; infill
 G1 X92.175 Y137.461 E7.34205 ; infill
 G1 X96.821 Y137.461 E7.56422 ; infill
 G1 X96.821 Y136.886 E7.59172 ; infill
 G1 X92.034 Y136.886 E7.82067 ; infill
 G1 X92.017 Y136.311 E7.84818 ; infill
 G1 X96.821 Y136.311 E8.07794 ; infill
 G1 X96.821 Y135.736 E8.10544 ; infill
 G1 X92.017 Y135.736 E8.33519 ; infill
 G1 X92.017 Y135.161 E8.36269 ; infill
 G1 X96.821 Y135.161 E8.59245 ; infill
 G1 X96.821 Y134.586 E8.61995 ; infill
 G1 X92.017 Y134.586 E8.84971 ; infill
 G1 X93.621 Y134.011 F12000.000 ; move to first infill point
 G1 X92.017 Y134.011 E8.92644 F7200.000 ; infill
 G1 X92.018 Y133.436 E8.95394 ; infill
 G1 X93.621 Y133.436 E9.03062 ; infill
 G1 X93.621 Y132.860 E9.05812 ; infill
 G1 X92.022 Y132.860 E9.13462 ; infill
 G1 X92.025 Y132.285 E9.16212 ; infill
 G1 X93.621 Y132.285 E9.23845 ; infill
 G1 X93.621 Y131.710 E9.26595 ; infill
 G1 X92.029 Y131.710 E9.34210 ; infill
 G1 X92.033 Y131.135 E9.36960 ; infill
 G1 X93.621 Y131.135 E9.44557 ; infill
 G1 X93.621 Y130.560 E9.47307 ; infill
 G1 X92.036 Y130.560 E9.54887 ; infill
 G1 X92.040 Y129.985 E9.57637 ; infill
 G1 X93.621 Y129.985 E9.65199 ; infill
 G1 X93.621 Y129.410 E9.67949 ; infill
 G1 X92.044 Y129.410 E9.75493 ; infill
 G1 X92.047 Y128.835 E9.78244 ; infill
 G1 X93.621 Y128.835 E9.85770 ; infill
 G1 X93.621 Y128.260 E9.88520 ; infill
 G1 X92.051 Y128.260 E9.96029 ; infill
 G1 X92.055 Y127.685 E9.98780 ; infill
 G1 X93.621 Y127.685 E10.06271 ; infill
 G1 X93.621 Y127.109 E10.09021 ; infill
 G1 X92.058 Y127.109 E10.16495 ; infill
 G1 X92.062 Y126.534 E10.19245 ; infill
 G1 X93.621 Y126.534 E10.26701 ; infill
 G1 X93.621 Y125.959 E10.29451 ; infill
 G1 X92.066 Y125.959 E10.36890 ; infill
 G1 X92.069 Y125.384 E10.39640 ; infill
 G1 X93.621 Y125.384 E10.47061 ; infill
 G1 X93.621 Y124.809 E10.49811 ; infill
 G1 X92.073 Y124.809 E10.57215 ; infill
 G1 X92.077 Y124.234 E10.59965 ; infill
 G1 X93.621 Y124.234 E10.67350 ; infill
 G1 X93.621 Y123.659 E10.70101 ; infill
 G1 X92.081 Y123.659 E10.77469 ; infill
 G1 X92.084 Y123.084 E10.80219 ; infill
 G1 X93.621 Y123.084 E10.87569 ; infill
 G1 X93.621 Y122.509 E10.90319 ; infill
 G1 X92.088 Y122.509 E10.97652 ; infill
 G1 X92.092 Y121.934 E11.00402 ; infill
 G1 X92.472 Y121.934 E11.02219 ; infill
 G1 X91.703 Y119.744 F12000.000 ; move to first infill point
 G1 X91.491 Y119.308 E11.03659 F1800.000 ; infill
 G1 X91.388 Y118.357 E11.06499 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E10.83778 ; wipe and retract
 G1 F9600
 G1 X91.703 Y119.744 E10.72264 ; wipe and retract
 G1 E6.06499 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.800 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z3.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X105.107 Y121.240 F12000.000 ; move to first infill point
 G1 X105.494 Y121.240 E5.07167 F7200.000 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.930 E5.13770 F1800.000 ; infill
 G1 X105.579 Y117.930 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.15587 F1800.000 ; infill
 G1 X104.413 Y110.364 E5.36505 ; infill
 G1 X102.427 Y97.969 F12000.000 ; move to first infill point
 G1 X98.594 Y74.053 E6.88983 F1800.000 ; infill
 G1 X98.594 Y74.053 F12000.000 ; move to first infill point
 G1 X97.962 Y70.107 E7.00847 F1800.000 ; infill
 G1 X94.601 Y68.841 F12000.000 ; move to first infill point
 G1 X92.452 Y68.841 E7.12519 F7200.000 ; infill
 G1 X92.452 Y68.188 E7.16066 ; infill
 G1 X94.601 Y68.188 E7.27739 ; infill
 G1 X94.601 Y67.534 E7.31286 ; infill
 G1 X92.452 Y67.534 E7.42959 ; infill
 G1 X92.452 Y66.881 E7.46506 ; infill
 G1 X94.601 Y66.881 E7.58179 ; infill
 G1 X94.601 Y66.228 E7.61726 ; infill
 G1 X92.452 Y66.228 E7.73399 ; infill
 G1 X92.453 Y65.575 E7.76946 ; infill
 G1 X94.601 Y65.575 E7.88613 ; infill
 G1 F9600
 G1 X92.453 Y65.575 E7.37588 ; wipe and retract
 G1 F9600
 G1 X92.452 Y66.228 E7.22076 ; wipe and retract
 G1 F9600
 G1 X94.601 Y66.228 E6.71028 ; wipe and retract
 G1 F9600
 G1 X94.601 Y66.881 E6.55516 ; wipe and retract
 G1 F9600
 G1 X92.452 Y66.881 E6.04468 ; wipe and retract
 G1 F9600
 G1 X92.452 Y67.534 E5.88957 ; wipe and retract
 G1 F9600
 G1 X94.601 Y67.534 E5.37909 ; wipe and retract
 G1 F9600
 G1 X94.601 Y68.188 E5.22397 ; wipe and retract
 G1 F9600
 G1 X92.452 Y68.188 E4.71349 ; wipe and retract
 G1 F9600
 G1 X92.452 Y68.841 E4.55837 ; wipe and retract
 G1 F9600
 G1 X94.601 Y68.841 E4.04789 ; wipe and retract
 G1 E2.88613 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.800 F12000.000 ; lift Z
 G1 X96.608 Y62.628 F12000.000 ; move to first perimeter point
 G1 Z3.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X90.485 Y62.628 E5.18180 F7200.000 ; perimeter
 G1 X90.507 Y59.215 E5.28316 ; perimeter
 G1 X96.608 Y59.215 E5.46431 ; perimeter
 G1 X96.608 Y62.568 E5.56388 ; perimeter
 G1 X96.262 Y62.428 F12000.000 ; move inwards before travel
 G1 X96.251 Y62.271 F12000.000 ; move to first perimeter point
 G1 X90.844 Y62.271 E5.72441 F7200.000 ; perimeter
 G1 X90.862 Y59.572 E5.80456 ; perimeter
 G1 X96.251 Y59.572 E5.96458 ; perimeter
 G1 X96.251 Y62.211 E6.04294 ; perimeter
 G1 X95.894 Y61.914 F12000.000 ; move to first perimeter point
 G1 X91.204 Y61.914 E6.18220 F7200.000 ; perimeter
 G1 X91.216 Y59.929 E6.24114 ; perimeter
 G1 X95.894 Y59.929 E6.38002 ; perimeter
 G1 X95.894 Y61.854 E6.43718 ; perimeter
 G1 X95.537 Y61.557 F12000.000 ; move to first perimeter point
 G1 X91.563 Y61.557 E6.55517 F7200.000 ; perimeter
 G1 X91.571 Y60.286 E6.59291 ; perimeter
 G1 X95.537 Y60.286 E6.71065 ; perimeter
 G1 X95.537 Y61.497 E6.74661 ; perimeter
 G1 X95.180 Y61.200 F12000.000 ; move to first perimeter point
 G1 X91.922 Y61.200 E6.84332 F7200.000 ; perimeter
 G1 X91.926 Y60.643 E6.85985 ; perimeter
 G1 X95.180 Y60.643 E6.95646 ; perimeter
 G1 X95.180 Y61.140 E6.97121 ; perimeter
 G1 X95.001 Y60.921 F12000.000 ; move to first infill point
 G1 X92.103 Y60.921 E7.05727 F1800.000 ; infill
 G1 F9600
 G1 X95.001 Y60.921 E6.36888 ; wipe and retract
 G1 E2.05727 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z4.800 F12000.000 ; lift Z
 G1 X96.608 Y69.215 F12000.000 ; move to first perimeter point
 G1 Z4.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.811 Y69.215 E5.06541 F7200.000 ; perimeter
 G1 X107.942 Y123.815 E6.70907 ; perimeter
 G1 X95.608 Y123.815 E7.07527 ; perimeter
 G1 X95.608 Y132.215 E7.32468 ; perimeter
 G1 X109.346 Y132.215 E7.73258 ; perimeter
 G1 X109.992 Y136.074 E7.84876 ; perimeter
 G1 X109.992 Y137.923 E7.90365 ; perimeter
 G1 X109.148 Y139.531 E7.95757 ; perimeter
 G1 X107.653 Y140.562 E8.01149 ; perimeter
 G1 X105.814 Y140.785 E8.06651 ; perimeter
 G1 X93.363 Y140.785 E8.43620 ; perimeter
 G1 X91.653 Y140.137 E8.49050 ; perimeter
 G1 X90.449 Y138.778 E8.54441 ; perimeter
 G1 X90.008 Y136.991 E8.59905 ; perimeter
 G1 X90.507 Y59.215 E10.90838 ; perimeter
 G1 X96.608 Y59.215 E11.08954 ; perimeter
 G1 X96.608 Y69.155 E11.38467 ; perimeter
 G1 X96.608 Y69.615 F12000.000 ; move inwards before travel
 G1 X96.251 Y69.572 F12000.000 ; move to first perimeter point
 G1 X98.509 Y69.572 E11.45170 F7200.000 ; perimeter
 G1 X107.520 Y123.458 E13.07386 ; perimeter
 G1 X95.251 Y123.458 E13.43814 ; perimeter
 G1 X95.251 Y132.572 E13.70875 ; perimeter
 G1 X98.451 Y132.572 E13.80377 ; perimeter
 G1 X98.451 Y136.372 E13.91659 ; perimeter
 G1 X105.165 Y136.372 E14.11595 ; perimeter
 G1 X105.165 Y132.572 E14.22877 ; perimeter
 G1 X109.044 Y132.572 E14.34394 ; perimeter
 G1 X109.635 Y136.104 E14.45027 ; perimeter
 G1 X109.635 Y137.835 E14.50166 ; perimeter
 G1 X108.873 Y139.287 E14.55035 ; perimeter
 G1 X107.523 Y140.218 E14.59905 ; perimeter
 G1 X105.792 Y140.428 E14.65081 ; perimeter
 G1 X93.428 Y140.428 E15.01792 ; perimeter
 G1 X91.862 Y139.834 E15.06766 ; perimeter
 G1 X90.774 Y138.607 E15.11635 ; perimeter
 G1 X90.366 Y136.949 E15.16705 ; perimeter
 G1 X90.862 Y59.572 E17.46453 ; perimeter
 G1 X96.251 Y59.572 E17.62454 ; perimeter
 G1 X96.251 Y69.512 E17.91968 ; perimeter
 G1 X95.894 Y69.929 F12000.000 ; move to first perimeter point
 G1 X98.206 Y69.929 E17.98834 F7200.000 ; perimeter
 G1 X107.098 Y123.100 E19.58900 ; perimeter
 G1 X94.894 Y123.100 E19.95136 ; perimeter
 G1 X94.894 Y132.929 E20.24317 ; perimeter
 G1 X98.094 Y132.929 E20.33819 ; perimeter
 G1 X98.094 Y136.729 E20.45101 ; perimeter
 G1 X105.522 Y136.729 E20.67157 ; perimeter
 G1 X105.522 Y132.929 E20.78440 ; perimeter
 G1 X108.742 Y132.929 E20.87999 ; perimeter
 G1 X109.278 Y136.133 E20.97645 ; perimeter
 G1 X109.278 Y137.747 E21.02436 ; perimeter
 G1 X108.597 Y139.043 E21.06782 ; perimeter
 G1 X107.393 Y139.874 E21.11129 ; perimeter
 G1 X105.771 Y140.071 E21.15980 ; perimeter
 G1 X93.493 Y140.071 E21.52432 ; perimeter
 G1 X92.071 Y139.532 E21.56950 ; perimeter
 G1 X91.100 Y138.436 E21.61297 ; perimeter
 G1 X90.723 Y136.906 E21.65974 ; perimeter
 G1 X91.216 Y59.929 E23.94535 ; perimeter
 G1 X95.894 Y59.929 E24.08424 ; perimeter
 G1 X95.894 Y69.869 E24.37937 ; perimeter
 G1 X91.819 Y69.943 F12000.000 ; move to first perimeter point
 G1 X91.536 Y118.153 E25.81079 F7200.000 ; perimeter
 G1 X91.886 Y119.700 E25.85790 ; perimeter
 G1 X92.975 Y121.041 E25.90919 ; perimeter
 G1 X94.490 Y121.668 E25.95789 ; perimeter
 G1 X101.702 Y121.668 E26.17201 ; perimeter
 G1 X103.161 Y121.475 E26.21572 ; perimeter
 G1 X104.541 Y120.436 E26.26701 ; perimeter
 G1 X105.290 Y118.879 E26.31831 ; perimeter
 G1 X105.290 Y117.343 E26.36391 ; perimeter
 G1 X102.350 Y98.162 E26.94007 ; perimeter
 G1 X102.560 Y98.128 E26.94639 ; perimeter
 G1 X106.677 Y122.743 E27.68739 ; perimeter
 G1 X94.537 Y122.743 E28.04783 ; perimeter
 G1 X94.537 Y133.286 E28.36085 ; perimeter
 G1 X97.737 Y133.286 E28.45586 ; perimeter
 G1 X97.737 Y137.086 E28.56869 ; perimeter
 G1 X105.879 Y137.086 E28.81045 ; perimeter
 G1 X105.879 Y133.286 E28.92328 ; perimeter
 G1 X108.440 Y133.286 E28.99929 ; perimeter
 G1 X108.921 Y136.163 E29.08590 ; perimeter
 G1 X108.921 Y137.659 E29.13031 ; perimeter
 G1 X108.322 Y138.799 E29.16855 ; perimeter
 G1 X107.262 Y139.530 E29.20679 ; perimeter
 G1 X105.749 Y139.714 E29.25204 ; perimeter
 G1 X93.559 Y139.714 E29.61398 ; perimeter
 G1 X92.280 Y139.229 E29.65461 ; perimeter
 G1 X91.426 Y138.265 E29.69285 ; perimeter
 G1 X91.080 Y136.864 E29.73568 ; perimeter
 G1 X91.571 Y60.286 E32.00944 ; perimeter
 G1 X95.537 Y60.286 E32.12719 ; perimeter
 G1 X95.537 Y69.943 E32.41393 ; perimeter
 G1 X91.879 Y69.943 E32.52253 ; perimeter
 G1 X91.869 Y69.586 F12000.000 ; move to first perimeter point
 G1 X91.926 Y60.643 E32.78807 F7200.000 ; perimeter
 G1 X95.180 Y60.643 E32.88468 ; perimeter
 G1 X95.180 Y69.586 E33.15022 ; perimeter
 G1 X91.929 Y69.586 E33.24675 ; perimeter
 G1 X92.228 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.281 Y61.000 E33.49109 F7200.000 ; perimeter
 G1 X94.823 Y61.000 E33.56657 ; perimeter
 G1 X94.823 Y69.229 E33.81090 ; perimeter
 G1 X92.288 Y69.229 E33.88616 ; perimeter
 G1 F9600
 G1 X92.281 Y61.000 E31.93172 ; wipe and retract
 G1 F9600
 G1 X94.823 Y61.000 E31.32802 ; wipe and retract
 G1 F9600
 G1 X94.823 Y69.229 E29.37358 ; wipe and retract
 G1 F9600
 G1 X93.823 Y69.229 E29.13616 ; wipe and retract
 G1 E28.88616 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.000 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z4.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X106.236 Y137.443 E5.80503 ; perimeter
 G1 X106.236 Y133.643 E5.91785 ; perimeter
 G1 X108.137 Y133.643 E5.97429 ; perimeter
 G1 X108.564 Y136.193 E6.05104 ; perimeter
 G1 X108.564 Y137.571 E6.09196 ; perimeter
 G1 X108.047 Y138.555 E6.12497 ; perimeter
 G1 X107.132 Y139.187 E6.15798 ; perimeter
 G1 X105.728 Y139.357 E6.19998 ; perimeter
 G1 X93.624 Y139.357 E6.55934 ; perimeter
 G1 X92.488 Y138.926 E6.59541 ; perimeter
 G1 X91.751 Y138.094 E6.62842 ; perimeter
 G1 X91.438 Y136.822 E6.66732 ; perimeter
 G1 X91.546 Y119.849 E7.17128 ; perimeter
 G1 X92.754 Y121.337 E7.22818 ; perimeter
 G1 X94.419 Y122.025 E7.28168 ; perimeter
 G1 X101.725 Y122.025 E7.49860 ; perimeter
 G1 X103.301 Y121.817 E7.54579 ; perimeter
 G1 X104.825 Y120.669 E7.60245 ; perimeter
 G1 X105.561 Y119.141 E7.65279 ; perimeter
 G1 X105.716 Y119.163 E7.65745 ; perimeter
 G1 X106.255 Y122.386 E7.75447 ; perimeter
 G1 X94.240 Y122.386 E8.11121 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E8.11579 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E8.16422 ; perimeter
 G1 X105.394 Y120.311 E8.18370 ; perimeter
 G1 X105.549 Y120.333 E8.18835 ; perimeter
 G1 X105.833 Y122.029 E8.23942 ; perimeter
 G1 X103.916 Y122.029 E8.29635 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E8.25304 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.86568 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E7.70986 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E7.67261 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E7.26411 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.80871 ; wipe and retract
 G1 E3.29635 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.000 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z4.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X106.593 Y137.800 E5.49201 ; perimeter
 G1 X106.593 Y134.000 E5.60483 ; perimeter
 G1 X107.835 Y134.000 E5.64169 ; perimeter
 G1 X108.207 Y136.222 E5.70859 ; perimeter
 G1 X108.207 Y137.482 E5.74601 ; perimeter
 G1 X107.772 Y138.311 E5.77380 ; perimeter
 G1 X107.001 Y138.843 E5.80158 ; perimeter
 G1 X105.706 Y139.000 E5.84033 ; perimeter
 G1 X93.690 Y139.000 E6.19710 ; perimeter
 G1 X92.697 Y138.624 E6.22862 ; perimeter
 G1 X92.077 Y137.923 E6.25640 ; perimeter
 G1 X91.795 Y136.780 E6.29137 ; perimeter
 G1 X91.897 Y120.847 E6.76443 ; perimeter
 G1 X92.534 Y121.632 E6.79444 ; perimeter
 G1 X93.823 Y122.165 E6.83584 ; perimeter
 G1 X93.823 Y133.940 E7.18545 ; perimeter
 G1 F9600
 G1 X97.023 Y134.000 E6.42532 ; wipe and retract
 G1 F9600
 G1 X97.023 Y137.800 E5.52282 ; wipe and retract
 G1 F9600
 G1 X106.593 Y137.800 E3.24976 ; wipe and retract
 G1 F9600
 G1 X106.593 Y134.371 E2.43545 ; wipe and retract
 G1 E2.18545 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.000 F12000.000 ; lift Z
 G1 X92.884 Y71.015 F12000.000 ; move to first perimeter point
 G1 Z4.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.105 Y71.015 E5.12531 F7200.000 ; perimeter
 G1 X104.219 Y117.425 E6.51939 ; perimeter
 G1 X104.219 Y118.635 E6.55531 ; perimeter
 G1 X103.689 Y119.737 E6.59162 ; perimeter
 G1 X102.742 Y120.450 E6.62683 ; perimeter
 G1 X101.631 Y120.597 E6.66009 ; perimeter
 G1 X94.703 Y120.597 E6.86579 ; perimeter
 G1 X93.635 Y120.155 E6.90011 ; perimeter
 G1 X92.875 Y119.220 E6.93589 ; perimeter
 G1 X92.608 Y118.036 E6.97191 ; perimeter
 G1 X92.884 Y71.075 E8.36629 ; perimeter
 G1 X92.885 Y70.615 F12000.000 ; move inwards before travel
 G1 X92.529 Y70.658 F12000.000 ; move to first perimeter point
 G1 X97.411 Y70.658 E8.51124 F7200.000 ; perimeter
 G1 X104.576 Y117.398 E9.91523 ; perimeter
 G1 X104.576 Y118.716 E9.95438 ; perimeter
 G1 X103.973 Y119.970 E9.99568 ; perimeter
 G1 X102.881 Y120.792 E10.03626 ; perimeter
 G1 X101.655 Y120.954 E10.07300 ; perimeter
 G1 X94.632 Y120.954 E10.28150 ; perimeter
 G1 X93.415 Y120.451 E10.32062 ; perimeter
 G1 X92.545 Y119.380 E10.36157 ; perimeter
 G1 X92.251 Y118.075 E10.40129 ; perimeter
 G1 X92.529 Y70.718 E11.80742 ; perimeter
 G1 X92.174 Y70.300 F12000.000 ; move to first perimeter point
 G1 X97.718 Y70.300 E11.97201 F7200.000 ; perimeter
 G1 X104.933 Y117.371 E13.38591 ; perimeter
 G1 X104.933 Y118.797 E13.42828 ; perimeter
 G1 X104.257 Y120.203 E13.47458 ; perimeter
 G1 X103.021 Y121.133 E13.52051 ; perimeter
 G1 X101.678 Y121.311 E13.56074 ; perimeter
 G1 X94.561 Y121.311 E13.77205 ; perimeter
 G1 X93.195 Y120.746 E13.81596 ; perimeter
 G1 X92.216 Y119.540 E13.86208 ; perimeter
 G1 X91.893 Y118.114 E13.90549 ; perimeter
 G1 X92.174 Y70.360 E15.32338 ; perimeter
 G1 F9600
 G1 X97.718 Y70.300 E14.00664 ; wipe and retract
 G1 F9600
 G1 X99.908 Y84.589 E10.57338 ; wipe and retract
 G1 E10.32338 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.000 F12000.000 ; lift Z
 G1 X98.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z4.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X104.808 Y133.015 E5.17815 F7200.000 ; perimeter
 G1 X104.808 Y136.015 E5.26722 ; perimeter
 G1 X98.808 Y136.015 E5.44537 ; perimeter
 G1 X98.808 Y133.075 E5.53266 ; perimeter
 G1 X98.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X104.987 Y132.615 E5.93285 F1800.000 ; infill
 G1 X107.260 Y134.201 F12000.000 ; move to first infill point
 G1 X107.260 Y138.384 E6.12703 F7200.000 ; infill
 G1 X106.701 Y138.675 E6.15627 ; infill
 G1 X106.701 Y138.001 E6.18755 ; infill
 G1 X106.143 Y138.001 E6.21347 ; infill
 G1 X106.143 Y138.743 E6.24790 ; infill
 G1 X105.585 Y138.779 E6.27388 ; infill
 G1 X105.585 Y138.001 E6.30996 ; infill
 G1 X105.026 Y138.001 E6.33589 ; infill
 G1 X105.026 Y138.779 E6.37197 ; infill
 G1 X104.468 Y138.779 E6.39790 ; infill
 G1 X104.468 Y138.001 E6.43398 ; infill
 G1 X103.909 Y138.001 E6.45991 ; infill
 G1 X103.909 Y138.779 E6.49599 ; infill
 G1 X103.351 Y138.779 E6.52192 ; infill
 G1 X103.351 Y138.001 E6.55800 ; infill
 G1 X102.793 Y138.001 E6.58393 ; infill
 G1 X102.793 Y138.779 E6.62001 ; infill
 G1 X102.234 Y138.779 E6.64594 ; infill
 G1 X102.234 Y138.001 E6.68202 ; infill
 G1 X101.676 Y138.001 E6.70795 ; infill
 G1 X101.676 Y138.779 E6.74403 ; infill
 G1 X101.118 Y138.779 E6.76996 ; infill
 G1 X101.118 Y138.001 E6.80604 ; infill
 G1 X100.559 Y138.001 E6.83197 ; infill
 G1 X100.559 Y138.779 E6.86805 ; infill
 G1 X100.001 Y138.779 E6.89398 ; infill
 G1 X100.001 Y138.001 E6.93006 ; infill
 G1 X99.443 Y138.001 E6.95599 ; infill
 G1 X99.443 Y138.779 E6.99208 ; infill
 G1 X98.884 Y138.779 E7.01800 ; infill
 G1 X98.884 Y138.001 E7.05409 ; infill
 G1 X98.326 Y138.001 E7.08001 ; infill
 G1 X98.326 Y138.779 E7.11610 ; infill
 G1 X97.767 Y138.779 E7.14202 ; infill
 G1 X97.767 Y138.001 E7.17810 ; infill
 G1 X97.209 Y138.001 E7.20403 ; infill
 G1 X97.209 Y138.779 E7.24011 ; infill
 G1 X96.651 Y138.779 E7.26604 ; infill
 G1 X96.651 Y134.201 E7.47855 ; infill
 G1 X96.092 Y134.201 E7.50448 ; infill
 G1 X96.092 Y138.779 E7.71699 ; infill
 G1 X95.534 Y138.779 E7.74291 ; infill
 G1 X95.534 Y134.201 E7.95542 ; infill
 G1 X94.976 Y134.201 E7.98135 ; infill
 G1 X94.976 Y138.779 E8.19386 ; infill
 G1 X94.417 Y138.779 E8.21978 ; infill
 G1 X94.417 Y134.201 E8.43230 ; infill
 G1 X93.859 Y134.201 E8.45822 ; infill
 G1 X93.859 Y138.779 E8.67073 ; infill
 G1 X93.301 Y138.625 E8.69762 ; infill
 G1 X93.301 Y122.181 E9.46111 ; infill
 G1 X92.742 Y121.950 E9.48917 ; infill
 G1 X92.742 Y138.286 E10.24761 ; infill
 G1 X92.184 Y136.984 F12000.000 ; move to first infill point
 G1 X92.184 Y133.450 E10.41173 F7200.000 ; infill
 G1 F9600
 G1 X92.184 Y136.984 E9.57222 ; wipe and retract
 G1 E5.41173 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.000 F12000.000 ; lift Z
 G1 X107.818 Y135.966 F12000.000 ; move to first infill point
 G1 Z4.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X107.818 Y137.597 E5.07572 F7200.000 ; infill
 G1 F9600
 G1 X107.818 Y135.966 E4.68840 ; wipe and retract
 G1 E0.07572 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.000 F12000.000 ; lift Z
 G1 X91.703 Y119.744 F12000.000 ; move to first infill point
 G1 Z4.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.491 Y119.308 E5.01440 F1800.000 ; infill
 G1 X91.388 Y118.357 E5.04280 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E4.81559 ; wipe and retract
 G1 F9600
 G1 X91.703 Y119.744 E4.70044 ; wipe and retract
 G1 E0.04280 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.000 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z4.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X104.774 Y121.808 F12000.000 ; move to first infill point
 G1 X104.774 Y121.449 E5.07163 F7200.000 ; infill
 G1 X105.374 Y121.352 E5.10194 ; infill
 G1 X105.374 Y121.808 E5.12466 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.930 E5.19070 F1800.000 ; infill
 G1 X105.579 Y117.930 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.20887 F1800.000 ; infill
 G1 X104.413 Y110.364 E5.41805 ; infill
 G1 F9600
 G1 X105.528 Y117.321 E3.74482 ; wipe and retract
 G1 F9600
 G1 X105.579 Y117.930 E3.59949 ; wipe and retract
 G1 E0.41805 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.000 F12000.000 ; lift Z
 G1 X102.427 Y97.969 F12000.000 ; move to first infill point
 G1 Z4.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.594 Y74.053 E6.52477 F1800.000 ; infill
 G1 X98.594 Y74.053 F12000.000 ; move to first infill point
 G1 X97.962 Y70.107 E6.64341 F1800.000 ; infill
 G1 X94.434 Y69.008 F12000.000 ; move to first infill point
 G1 X94.434 Y66.313 E6.77901 F7200.000 ; infill
 G1 X93.829 Y66.313 E6.80945 ; infill
 G1 X93.829 Y69.008 E6.94505 ; infill
 G1 X93.224 Y69.008 E6.97549 ; infill
 G1 X93.224 Y66.313 E7.11108 ; infill
 G1 X92.619 Y66.313 E7.14152 ; infill
 G1 X92.619 Y69.008 E7.27712 ; infill
 G1 X94.488 Y66.111 F12000.000 ; move to first infill point
 M106 S255 ; enable fan
 G1 X94.488 Y61.200 E7.56810 F1680.000 ; infill
 G1 X94.012 Y61.200 E7.59630 ; infill
 G1 X94.012 Y66.111 E7.88729 ; infill
 G1 X93.536 Y66.111 E7.91549 ; infill
 G1 X93.536 Y61.200 E8.20647 ; infill
 G1 X93.060 Y61.200 E8.23467 ; infill
 G1 X93.060 Y66.111 E8.52565 ; infill
 G1 X92.584 Y66.111 E8.55385 ; infill
 G1 X92.584 Y62.721 E8.75469 ; infill
 M106 S234.6 ; enable fan
 G1 F9600
 G1 X92.584 Y66.111 E7.94962 ; wipe and retract
 G1 F9600
 G1 X93.060 Y66.111 E7.83657 ; wipe and retract
 G1 F9600
 G1 X93.060 Y61.200 E6.67016 ; wipe and retract
 G1 F9600
 G1 X93.536 Y61.200 E6.55712 ; wipe and retract
 G1 F9600
 G1 X93.536 Y66.111 E5.39071 ; wipe and retract
 G1 F9600
 G1 X94.012 Y66.111 E5.27767 ; wipe and retract
 G1 F9600
 G1 X94.012 Y61.200 E4.11126 ; wipe and retract
 G1 F9600
 G1 X94.460 Y61.200 E4.00469 ; wipe and retract
 G1 E3.75469 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.000 F12000.000 ; lift Z
 G1 Z4.000 F12000.000 ; move to next layer (34)
 M106 S239.7 ; enable fan
 G1 Z5.000 F12000.000 ; lift Z
 G1 X95.608 Y132.215 F12000.000 ; move to first perimeter point
 G1 Z4.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X109.346 Y132.215 E5.40791 F7200.000 ; perimeter
 G1 X109.992 Y136.074 E5.52409 ; perimeter
 G1 X109.992 Y137.923 E5.57898 ; perimeter
 G1 X109.148 Y139.531 E5.63290 ; perimeter
 G1 X107.653 Y140.562 E5.68681 ; perimeter
 G1 X105.814 Y140.785 E5.74183 ; perimeter
 G1 X93.363 Y140.785 E6.11153 ; perimeter
 G1 X91.653 Y140.137 E6.16582 ; perimeter
 G1 X90.449 Y138.778 E6.21974 ; perimeter
 G1 X90.008 Y136.991 E6.27438 ; perimeter
 G1 X90.507 Y59.215 E8.58371 ; perimeter
 G1 X96.608 Y59.215 E8.76486 ; perimeter
 G1 X96.608 Y69.215 E9.06178 ; perimeter
 G1 X98.811 Y69.215 E9.12718 ; perimeter
 G1 X101.085 Y82.815 E9.53659 ; perimeter
 G1 X98.914 Y82.815 E9.60107 ; perimeter
 G1 X97.105 Y71.015 E9.95552 ; perimeter
 G1 X92.884 Y71.015 E10.08084 ; perimeter
 G1 X92.608 Y118.036 E11.47700 ; perimeter
 G1 X92.875 Y119.220 E11.51302 ; perimeter
 G1 X93.635 Y120.155 E11.54880 ; perimeter
 G1 X94.703 Y120.597 E11.58312 ; perimeter
 G1 X101.631 Y120.597 E11.78882 ; perimeter
 G1 X102.742 Y120.450 E11.82208 ; perimeter
 G1 X103.689 Y119.737 E11.85729 ; perimeter
 G1 X104.219 Y118.635 E11.89360 ; perimeter
 G1 X104.219 Y117.425 E11.92952 ; perimeter
 G1 X103.267 Y111.215 E12.11606 ; perimeter
 G1 X105.835 Y111.215 E12.19230 ; perimeter
 G1 X107.942 Y123.815 E12.57160 ; perimeter
 G1 X95.608 Y123.815 E12.93780 ; perimeter
 G1 X95.608 Y132.155 E13.18543 ; perimeter
 G1 X95.608 Y132.615 F12000.000 ; move inwards before travel
 G1 X95.251 Y132.572 F12000.000 ; move to first perimeter point
 G1 X98.451 Y132.572 E13.28044 F7200.000 ; perimeter
 G1 X98.451 Y136.372 E13.39327 ; perimeter
 G1 X105.165 Y136.372 E13.59262 ; perimeter
 G1 X105.165 Y132.572 E13.70545 ; perimeter
 G1 X109.044 Y132.572 E13.82062 ; perimeter
 G1 X109.635 Y136.104 E13.92694 ; perimeter
 G1 X109.635 Y137.835 E13.97834 ; perimeter
 G1 X108.873 Y139.287 E14.02703 ; perimeter
 G1 X107.523 Y140.218 E14.07572 ; perimeter
 G1 X105.792 Y140.428 E14.12749 ; perimeter
 G1 X93.428 Y140.428 E14.49460 ; perimeter
 G1 X91.862 Y139.834 E14.54433 ; perimeter
 G1 X90.774 Y138.607 E14.59302 ; perimeter
 G1 X90.366 Y136.949 E14.64373 ; perimeter
 G1 X90.862 Y59.572 E16.94120 ; perimeter
 G1 X96.251 Y59.572 E17.10122 ; perimeter
 G1 X96.251 Y69.572 E17.39813 ; perimeter
 G1 X98.509 Y69.572 E17.46517 ; perimeter
 G1 X100.664 Y82.458 E17.85308 ; perimeter
 G1 X99.220 Y82.458 E17.89594 ; perimeter
 G1 X97.411 Y70.658 E18.25039 ; perimeter
 G1 X92.529 Y70.658 E18.39534 ; perimeter
 G1 X92.251 Y118.075 E19.80325 ; perimeter
 G1 X92.545 Y119.380 E19.84297 ; perimeter
 G1 X93.415 Y120.451 E19.88392 ; perimeter
 G1 X94.632 Y120.954 E19.92304 ; perimeter
 G1 X101.655 Y120.954 E20.13154 ; perimeter
 G1 X102.881 Y120.792 E20.16828 ; perimeter
 G1 X103.973 Y119.970 E20.20886 ; perimeter
 G1 X104.576 Y118.716 E20.25016 ; perimeter
 G1 X104.576 Y117.398 E20.28931 ; perimeter
 G1 X103.683 Y111.572 E20.46431 ; perimeter
 G1 X105.532 Y111.572 E20.51921 ; perimeter
 G1 X107.520 Y123.458 E20.87702 ; perimeter
 G1 X95.251 Y123.458 E21.24130 ; perimeter
 G1 X95.251 Y132.512 E21.51013 ; perimeter
 G1 X94.894 Y132.929 F12000.000 ; move to first perimeter point
 G1 X98.094 Y132.929 E21.60514 F7200.000 ; perimeter
 G1 X98.094 Y136.729 E21.71797 ; perimeter
 G1 X105.522 Y136.729 E21.93853 ; perimeter
 G1 X105.522 Y132.929 E22.05135 ; perimeter
 G1 X108.742 Y132.929 E22.14695 ; perimeter
 G1 X109.278 Y136.133 E22.24341 ; perimeter
 G1 X109.278 Y137.747 E22.29132 ; perimeter
 G1 X108.597 Y139.043 E22.33478 ; perimeter
 G1 X107.393 Y139.874 E22.37825 ; perimeter
 G1 X105.771 Y140.071 E22.42676 ; perimeter
 G1 X93.493 Y140.071 E22.79128 ; perimeter
 G1 X92.071 Y139.532 E22.83646 ; perimeter
 G1 X91.100 Y138.436 E22.87993 ; perimeter
 G1 X90.723 Y136.906 E22.92670 ; perimeter
 G1 X91.216 Y59.929 E25.21231 ; perimeter
 G1 X95.894 Y59.929 E25.35120 ; perimeter
 G1 X95.894 Y69.929 E25.64811 ; perimeter
 G1 X98.206 Y69.929 E25.71677 ; perimeter
 G1 X100.242 Y82.100 E26.08318 ; perimeter
 G1 X99.527 Y82.100 E26.10442 ; perimeter
 G1 X97.718 Y70.300 E26.45887 ; perimeter
 G1 X92.174 Y70.300 E26.62346 ; perimeter
 G1 X91.893 Y118.114 E28.04313 ; perimeter
 G1 X92.216 Y119.540 E28.08654 ; perimeter
 G1 X93.195 Y120.746 E28.13266 ; perimeter
 G1 X94.561 Y121.311 E28.17657 ; perimeter
 G1 X101.678 Y121.311 E28.38788 ; perimeter
 G1 X103.021 Y121.133 E28.42811 ; perimeter
 G1 X104.257 Y120.203 E28.47404 ; perimeter
 G1 X104.933 Y118.797 E28.52034 ; perimeter
 G1 X104.933 Y117.371 E28.56271 ; perimeter
 G1 X104.099 Y111.929 E28.72617 ; perimeter
 G1 X105.230 Y111.929 E28.75975 ; perimeter
 G1 X107.098 Y123.100 E29.09606 ; perimeter
 G1 X94.894 Y123.100 E29.45842 ; perimeter
 G1 X94.894 Y132.869 E29.74845 ; perimeter
 G1 X94.537 Y133.286 F12000.000 ; move to first perimeter point
 G1 X97.737 Y133.286 E29.84347 F7200.000 ; perimeter
 G1 X97.737 Y137.086 E29.95629 ; perimeter
 G1 X105.879 Y137.086 E30.19805 ; perimeter
 G1 X105.879 Y133.286 E30.31088 ; perimeter
 G1 X108.440 Y133.286 E30.38689 ; perimeter
 G1 X108.921 Y136.163 E30.47350 ; perimeter
 G1 X108.921 Y137.659 E30.51791 ; perimeter
 G1 X108.322 Y138.799 E30.55615 ; perimeter
 G1 X107.262 Y139.530 E30.59439 ; perimeter
 G1 X105.749 Y139.714 E30.63965 ; perimeter
 G1 X93.559 Y139.714 E31.00159 ; perimeter
 G1 X92.280 Y139.229 E31.04221 ; perimeter
 G1 X91.426 Y138.265 E31.08045 ; perimeter
 G1 X91.080 Y136.864 E31.12329 ; perimeter
 G1 X91.571 Y60.286 E33.39705 ; perimeter
 G1 X95.537 Y60.286 E33.51479 ; perimeter
 G1 X95.537 Y69.943 E33.80153 ; perimeter
 G1 X91.819 Y69.943 E33.91191 ; perimeter
 G1 X91.536 Y118.153 E35.34334 ; perimeter
 G1 X91.886 Y119.700 E35.39044 ; perimeter
 G1 X92.975 Y121.041 E35.44173 ; perimeter
 G1 X94.490 Y121.668 E35.49044 ; perimeter
 G1 X101.702 Y121.668 E35.70455 ; perimeter
 G1 X103.161 Y121.475 E35.74826 ; perimeter
 G1 X104.541 Y120.436 E35.79956 ; perimeter
 G1 X105.290 Y118.879 E35.85086 ; perimeter
 G1 X105.290 Y117.343 E35.89645 ; perimeter
 G1 X104.515 Y112.286 E36.04837 ; perimeter
 G1 X104.928 Y112.286 E36.06062 ; perimeter
 G1 X106.677 Y122.743 E36.37543 ; perimeter
 G1 X94.537 Y122.743 E36.73587 ; perimeter
 G1 X94.537 Y133.226 E37.04711 ; perimeter
 G1 F9600
 G1 X97.737 Y133.286 E36.28697 ; wipe and retract
 G1 F9600
 G1 X97.737 Y137.086 E35.38447 ; wipe and retract
 G1 F9600
 G1 X105.879 Y137.086 E33.45064 ; wipe and retract
 G1 F9600
 G1 X105.879 Y133.286 E32.54814 ; wipe and retract
 G1 F9600
 G1 X106.936 Y133.286 E32.29711 ; wipe and retract
 G1 E32.04711 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.200 F12000.000 ; lift Z
 G1 X95.180 Y69.586 F12000.000 ; move to first perimeter point
 G1 Z4.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.869 Y69.586 E5.09831 F7200.000 ; perimeter
 G1 X91.926 Y60.643 E5.36386 ; perimeter
 G1 X95.180 Y60.643 E5.46047 ; perimeter
 G1 X95.180 Y69.526 E5.72422 ; perimeter
 G1 X94.823 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.228 Y69.229 E5.80126 F7200.000 ; perimeter
 G1 X92.281 Y61.000 E6.04560 ; perimeter
 G1 X94.823 Y61.000 E6.12108 ; perimeter
 G1 X94.823 Y69.169 E6.36363 ; perimeter
 G1 F9600
 G1 X92.228 Y69.229 E5.74724 ; wipe and retract
 G1 F9600
 G1 X92.281 Y61.000 E3.79276 ; wipe and retract
 G1 F9600
 G1 X94.823 Y61.000 E3.18906 ; wipe and retract
 G1 F9600
 G1 X94.823 Y67.633 E1.61363 ; wipe and retract
 G1 E1.36363 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.200 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z4.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X106.236 Y137.443 E5.80503 ; perimeter
 G1 X106.236 Y133.643 E5.91785 ; perimeter
 G1 X108.137 Y133.643 E5.97429 ; perimeter
 G1 X108.564 Y136.193 E6.05104 ; perimeter
 G1 X108.564 Y137.571 E6.09196 ; perimeter
 G1 X108.047 Y138.555 E6.12497 ; perimeter
 G1 X107.132 Y139.187 E6.15798 ; perimeter
 G1 X105.728 Y139.357 E6.19998 ; perimeter
 G1 X93.624 Y139.357 E6.55934 ; perimeter
 G1 X92.488 Y138.926 E6.59541 ; perimeter
 G1 X91.751 Y138.094 E6.62842 ; perimeter
 G1 X91.438 Y136.822 E6.66732 ; perimeter
 G1 X91.546 Y119.849 E7.17128 ; perimeter
 G1 X92.754 Y121.337 E7.22818 ; perimeter
 G1 X94.419 Y122.025 E7.28168 ; perimeter
 G1 X101.725 Y122.025 E7.49860 ; perimeter
 G1 X103.301 Y121.817 E7.54579 ; perimeter
 G1 X104.825 Y120.669 E7.60245 ; perimeter
 G1 X105.561 Y119.141 E7.65279 ; perimeter
 G1 X105.716 Y119.163 E7.65745 ; perimeter
 G1 X106.255 Y122.386 E7.75447 ; perimeter
 G1 X94.240 Y122.386 E8.11121 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E8.11579 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E8.16422 ; perimeter
 G1 X105.394 Y120.311 E8.18370 ; perimeter
 G1 X105.549 Y120.333 E8.18835 ; perimeter
 G1 X105.833 Y122.029 E8.23942 ; perimeter
 G1 X103.916 Y122.029 E8.29635 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E8.25303 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.86568 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E7.70986 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E7.67261 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E7.26411 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.80872 ; wipe and retract
 G1 E3.29635 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.200 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z4.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X106.593 Y137.800 E5.49201 ; perimeter
 G1 X106.593 Y134.000 E5.60483 ; perimeter
 G1 X107.835 Y134.000 E5.64169 ; perimeter
 G1 X108.207 Y136.222 E5.70859 ; perimeter
 G1 X108.207 Y137.482 E5.74601 ; perimeter
 G1 X107.772 Y138.311 E5.77380 ; perimeter
 G1 X107.001 Y138.843 E5.80158 ; perimeter
 G1 X105.706 Y139.000 E5.84033 ; perimeter
 G1 X93.690 Y139.000 E6.19710 ; perimeter
 G1 X92.697 Y138.624 E6.22862 ; perimeter
 G1 X92.077 Y137.923 E6.25640 ; perimeter
 G1 X91.795 Y136.780 E6.29137 ; perimeter
 G1 X91.897 Y120.847 E6.76443 ; perimeter
 G1 X92.534 Y121.632 E6.79444 ; perimeter
 G1 X93.823 Y122.165 E6.83584 ; perimeter
 G1 X93.823 Y133.940 E7.18545 ; perimeter
 G1 X98.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 X104.808 Y133.015 E7.36360 F7200.000 ; perimeter
 G1 X104.808 Y136.015 E7.45268 ; perimeter
 G1 X98.808 Y136.015 E7.63082 ; perimeter
 G1 X98.808 Y133.075 E7.71812 ; perimeter
 G1 X98.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X104.987 Y132.615 E8.11830 F1800.000 ; infill
 G1 X107.693 Y134.388 F12000.000 ; move to first infill point
 G1 X106.795 Y134.388 E8.16337 F7200.000 ; infill
 G1 X106.795 Y134.992 E8.19364 ; infill
 G1 X107.794 Y134.992 E8.24377 ; infill
 G1 X107.895 Y135.595 E8.27445 ; infill
 G1 X106.795 Y135.595 E8.32964 ; infill
 G1 X106.795 Y136.198 E8.35990 ; infill
 G1 X107.985 Y136.198 E8.41961 ; infill
 G1 X107.985 Y136.802 E8.44987 ; infill
 G1 X106.795 Y136.802 E8.50958 ; infill
 G1 X106.795 Y137.405 E8.53984 ; infill
 G1 X107.985 Y137.405 E8.59955 ; infill
 G1 X107.681 Y138.008 E8.63343 ; infill
 G1 X106.795 Y138.008 E8.67791 ; infill
 G1 X106.015 Y138.611 E8.72735 ; infill
 G1 X105.006 Y138.611 E8.77798 ; infill
 G1 X104.823 Y138.712 F12000.000 ; move to first infill point
 G1 X98.793 Y138.712 E9.09037 F7200.000 ; infill
 G1 X98.793 Y138.088 E9.12265 ; infill
 G1 X104.823 Y138.088 E9.43504 ; infill
 G1 F9600
 G1 X98.793 Y138.088 E8.00284 ; wipe and retract
 G1 F9600
 G1 X98.793 Y138.712 E7.85488 ; wipe and retract
 G1 F9600
 G1 X104.823 Y138.712 E6.42268 ; wipe and retract
 G1 E4.43504 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.200 F12000.000 ; lift Z
 G1 X98.610 Y138.612 F12000.000 ; move to first infill point
 G1 Z4.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X93.538 Y138.612 E5.24257 F7200.000 ; infill
 G1 X96.821 Y138.036 F12000.000 ; move to first infill point
 G1 X92.502 Y138.036 E5.44911 F7200.000 ; infill
 G1 X92.175 Y137.461 E5.48074 ; infill
 G1 X96.821 Y137.461 E5.70291 ; infill
 G1 X96.821 Y136.886 E5.73041 ; infill
 G1 X92.034 Y136.886 E5.95935 ; infill
 G1 X92.017 Y136.311 E5.98687 ; infill
 G1 X96.821 Y136.311 E6.21662 ; infill
 G1 X96.821 Y135.736 E6.24412 ; infill
 G1 X92.017 Y135.736 E6.47388 ; infill
 G1 X92.017 Y135.161 E6.50138 ; infill
 G1 X96.821 Y135.161 E6.73114 ; infill
 G1 X96.821 Y134.586 E6.75864 ; infill
 G1 X92.017 Y134.586 E6.98839 ; infill
 G1 X93.621 Y134.011 F12000.000 ; move to first infill point
 G1 X92.017 Y134.011 E7.06512 F7200.000 ; infill
 G1 X92.018 Y133.436 E7.09263 ; infill
 G1 X93.621 Y133.436 E7.16930 ; infill
 G1 X93.621 Y132.860 E7.19680 ; infill
 G1 X92.022 Y132.860 E7.27331 ; infill
 G1 X92.025 Y132.285 E7.30081 ; infill
 G1 X93.621 Y132.285 E7.37713 ; infill
 G1 X93.621 Y131.710 E7.40463 ; infill
 G1 X92.029 Y131.710 E7.48078 ; infill
 G1 X92.033 Y131.135 E7.50828 ; infill
 G1 X93.621 Y131.135 E7.58426 ; infill
 G1 X93.621 Y130.560 E7.61176 ; infill
 G1 X92.036 Y130.560 E7.68755 ; infill
 G1 X92.040 Y129.985 E7.71505 ; infill
 G1 X93.621 Y129.985 E7.79067 ; infill
 G1 X93.621 Y129.410 E7.81818 ; infill
 G1 X92.044 Y129.410 E7.89362 ; infill
 G1 X92.047 Y128.835 E7.92112 ; infill
 G1 X93.621 Y128.835 E7.99639 ; infill
 G1 X93.621 Y128.260 E8.02389 ; infill
 G1 X92.051 Y128.260 E8.09898 ; infill
 G1 X92.055 Y127.685 E8.12648 ; infill
 G1 X93.621 Y127.685 E8.20139 ; infill
 G1 X93.621 Y127.109 E8.22890 ; infill
 G1 X92.058 Y127.109 E8.30363 ; infill
 G1 X92.062 Y126.534 E8.33114 ; infill
 G1 X93.621 Y126.534 E8.40570 ; infill
 G1 X93.621 Y125.959 E8.43320 ; infill
 G1 X92.066 Y125.959 E8.50758 ; infill
 G1 X92.069 Y125.384 E8.53509 ; infill
 G1 X93.621 Y125.384 E8.60930 ; infill
 G1 X93.621 Y124.809 E8.63680 ; infill
 G1 X92.073 Y124.809 E8.71083 ; infill
 G1 X92.077 Y124.234 E8.73833 ; infill
 G1 X93.621 Y124.234 E8.81219 ; infill
 G1 X93.621 Y123.659 E8.83969 ; infill
 G1 X92.081 Y123.659 E8.91337 ; infill
 G1 X92.084 Y123.084 E8.94087 ; infill
 G1 X93.621 Y123.084 E9.01438 ; infill
 G1 X93.621 Y122.509 E9.04188 ; infill
 G1 X92.088 Y122.509 E9.11520 ; infill
 G1 X92.092 Y121.934 E9.14271 ; infill
 G1 X92.472 Y121.934 E9.16088 ; infill
 G1 X91.703 Y119.744 F12000.000 ; move to first infill point
 G1 X91.491 Y119.308 E9.17527 F1800.000 ; infill
 G1 X91.388 Y118.357 E9.20368 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E8.97647 ; wipe and retract
 G1 F9600
 G1 X91.703 Y119.744 E8.86132 ; wipe and retract
 G1 E4.20368 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.200 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z4.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X105.107 Y121.240 F12000.000 ; move to first infill point
 G1 X105.494 Y121.240 E5.07167 F7200.000 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.931 E5.13770 F1800.000 ; infill
 G1 X105.579 Y117.931 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.15587 F1800.000 ; infill
 G1 X104.750 Y112.464 E5.30190 ; infill
 G1 F9600
 G1 X105.528 Y117.321 E4.13382 ; wipe and retract
 G1 F9600
 G1 X105.579 Y117.931 E3.98847 ; wipe and retract
 G1 E0.30190 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.200 F12000.000 ; lift Z
 G1 X99.855 Y81.922 F12000.000 ; move to first infill point
 G1 Z4.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.594 Y74.053 E5.50170 F1800.000 ; infill
 G1 X97.962 Y70.107 E5.62034 F1800.000 ; infill
 G1 X94.601 Y68.841 F12000.000 ; move to first infill point
 G1 X92.452 Y68.841 E5.72279 F7200.000 ; infill
 G1 X92.452 Y68.267 E5.75011 ; infill
 G1 X94.601 Y68.267 E5.85257 ; infill
 G1 X94.601 Y67.694 E5.87989 ; infill
 G1 X92.452 Y67.694 E5.98234 ; infill
 G1 X92.452 Y67.121 E6.00967 ; infill
 G1 X94.601 Y67.121 E6.11212 ; infill
 G1 X94.601 Y66.548 E6.13944 ; infill
 G1 X92.452 Y66.548 E6.24190 ; infill
 G1 X92.452 Y65.974 E6.26922 ; infill
 G1 X94.601 Y65.974 E6.37167 ; infill
 G1 X94.601 Y65.401 E6.39900 ; infill
 G1 X92.454 Y65.401 E6.50135 ; infill
 G1 X92.458 Y64.828 E6.52868 ; infill
 G1 X94.601 Y64.828 E6.63086 ; infill
 G1 X94.601 Y64.255 E6.65818 ; infill
 G1 X92.461 Y64.255 E6.76019 ; infill
 G1 X92.465 Y63.681 E6.78751 ; infill
 G1 X94.601 Y63.681 E6.88934 ; infill
 G1 X94.601 Y63.108 E6.91667 ; infill
 G1 X92.469 Y63.108 E7.01832 ; infill
 G1 X92.472 Y62.535 E7.04565 ; infill
 G1 X94.601 Y62.535 E7.14712 ; infill
 G1 X94.601 Y61.962 E7.17445 ; infill
 G1 X92.476 Y61.962 E7.27575 ; infill
 G1 X92.480 Y61.388 E7.30308 ; infill
 G1 X94.601 Y61.388 E7.40421 ; infill
 G1 F9600
 G1 X92.480 Y61.388 E6.90032 ; wipe and retract
 G1 F9600
 G1 X92.476 Y61.962 E6.76417 ; wipe and retract
 G1 F9600
 G1 X94.601 Y61.962 E6.25941 ; wipe and retract
 G1 F9600
 G1 X94.601 Y62.535 E6.12326 ; wipe and retract
 G1 F9600
 G1 X92.472 Y62.535 E5.61763 ; wipe and retract
 G1 F9600
 G1 X92.469 Y63.108 E5.48148 ; wipe and retract
 G1 F9600
 G1 X94.601 Y63.108 E4.97498 ; wipe and retract
 G1 F9600
 G1 X94.601 Y63.681 E4.83883 ; wipe and retract
 G1 F9600
 G1 X92.465 Y63.681 E4.33145 ; wipe and retract
 G1 F9600
 G1 X92.461 Y64.255 E4.19530 ; wipe and retract
 G1 F9600
 G1 X94.601 Y64.255 E3.68705 ; wipe and retract
 G1 F9600
 G1 X94.601 Y64.828 E3.55090 ; wipe and retract
 G1 F9600
 G1 X92.458 Y64.828 E3.04178 ; wipe and retract
 G1 F9600
 G1 X92.454 Y65.401 E2.90563 ; wipe and retract
 G1 F9600
 G1 X93.513 Y65.401 E2.65421 ; wipe and retract
 G1 E2.40421 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.200 F12000.000 ; lift Z
 G1 X101.979 Y102.815 F12000.000 ; move to first perimeter point
 G1 Z4.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X100.201 Y91.215 E5.34844 F7200.000 ; perimeter
 G1 X102.490 Y91.215 E5.41640 ; perimeter
 G1 X104.430 Y102.815 E5.76560 ; perimeter
 G1 X102.039 Y102.815 E5.83658 ; perimeter
 G1 X102.143 Y102.450 F12000.000 ; move inwards before travel
 G1 X102.286 Y102.458 F12000.000 ; move to first perimeter point
 G1 X100.617 Y91.572 E6.16357 F7200.000 ; perimeter
 G1 X102.188 Y91.572 E6.21020 ; perimeter
 G1 X104.008 Y102.458 E6.53790 ; perimeter
 G1 X102.346 Y102.458 E6.58725 ; perimeter
 G1 X102.593 Y102.100 F12000.000 ; move to first perimeter point
 G1 X101.033 Y91.929 E6.89279 F7200.000 ; perimeter
 G1 X101.885 Y91.929 E6.91809 ; perimeter
 G1 X103.586 Y102.100 E7.22430 ; perimeter
 G1 X102.653 Y102.100 E7.25203 ; perimeter
 G1 X102.899 Y101.743 F12000.000 ; move to first perimeter point
 G1 X102.350 Y98.160 E7.35966 F7200.000 ; perimeter
 G1 X102.560 Y98.127 E7.36598 ; perimeter
 G1 X103.165 Y101.743 E7.47486 ; perimeter
 G1 X102.959 Y101.743 E7.48097 ; perimeter
 G1 X102.427 Y97.967 F12000.000 ; move to first infill point
 G1 X101.487 Y92.107 E7.85455 F1800.000 ; infill
 G1 F9600
 G1 X102.427 Y97.967 E6.44510 ; wipe and retract
 G1 E2.85455 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.200 F12000.000 ; lift Z
 G1 Z4.200 F12000.000 ; move to next layer (36)
 G1 Z5.200 F12000.000 ; lift Z
 G1 X104.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z4.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X102.095 Y133.015 E5.08056 F7200.000 ; perimeter
 G1 X102.095 Y132.215 E5.10432 ; perimeter
 G1 X109.346 Y132.215 E5.31963 ; perimeter
 G1 X109.992 Y136.074 E5.43581 ; perimeter
 G1 X109.992 Y137.923 E5.49070 ; perimeter
 G1 X109.148 Y139.531 E5.54462 ; perimeter
 G1 X107.653 Y140.562 E5.59854 ; perimeter
 G1 X105.814 Y140.785 E5.65356 ; perimeter
 G1 X102.095 Y140.785 E5.76398 ; perimeter
 G1 X102.095 Y136.015 E5.90563 ; perimeter
 G1 X104.808 Y136.015 E5.98620 ; perimeter
 G1 X104.808 Y133.075 E6.07349 ; perimeter
 G1 X104.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X105.165 Y136.372 F12000.000 ; move to first perimeter point
 G1 X105.165 Y132.572 E6.18632 F7200.000 ; perimeter
 G1 X109.044 Y132.572 E6.30149 ; perimeter
 G1 X109.635 Y136.104 E6.40781 ; perimeter
 G1 X109.635 Y137.835 E6.45921 ; perimeter
 G1 X108.873 Y139.287 E6.50790 ; perimeter
 G1 X107.523 Y140.218 E6.55659 ; perimeter
 G1 X105.792 Y140.428 E6.60836 ; perimeter
 G1 X102.452 Y140.428 E6.70754 ; perimeter
 G1 X102.452 Y136.372 E6.82799 ; perimeter
 G1 X105.105 Y136.372 E6.90677 ; perimeter
 G1 X105.522 Y136.729 F12000.000 ; move to first perimeter point
 G1 X105.522 Y132.929 E7.01960 F7200.000 ; perimeter
 G1 X108.742 Y132.929 E7.11519 ; perimeter
 G1 X109.278 Y136.133 E7.21166 ; perimeter
 G1 X109.278 Y137.747 E7.25956 ; perimeter
 G1 X108.597 Y139.043 E7.30302 ; perimeter
 G1 X107.393 Y139.874 E7.34649 ; perimeter
 G1 X105.771 Y140.071 E7.39500 ; perimeter
 G1 X102.809 Y140.071 E7.48294 ; perimeter
 G1 X102.809 Y136.729 E7.58218 ; perimeter
 G1 X105.462 Y136.729 E7.66097 ; perimeter
 G1 X105.879 Y137.086 F12000.000 ; move to first perimeter point
 G1 X105.879 Y133.286 E7.77379 F7200.000 ; perimeter
 G1 X108.440 Y133.286 E7.84981 ; perimeter
 G1 X108.921 Y136.163 E7.93642 ; perimeter
 G1 X108.921 Y137.659 E7.98083 ; perimeter
 G1 X108.322 Y138.799 E8.01906 ; perimeter
 G1 X107.262 Y139.530 E8.05730 ; perimeter
 G1 X105.749 Y139.714 E8.10256 ; perimeter
 G1 X103.166 Y139.714 E8.17926 ; perimeter
 G1 X103.166 Y137.086 E8.25729 ; perimeter
 G1 X105.819 Y137.086 E8.33608 ; perimeter
 G1 X106.236 Y137.443 F12000.000 ; move to first perimeter point
 G1 X106.236 Y133.643 E8.44890 F7200.000 ; perimeter
 G1 X108.137 Y133.643 E8.50534 ; perimeter
 G1 X108.564 Y136.193 E8.58209 ; perimeter
 G1 X108.564 Y137.571 E8.62301 ; perimeter
 G1 X108.047 Y138.555 E8.65602 ; perimeter
 G1 X107.132 Y139.187 E8.68903 ; perimeter
 G1 X105.728 Y139.357 E8.73103 ; perimeter
 G1 X103.523 Y139.357 E8.79649 ; perimeter
 G1 X103.523 Y137.443 E8.85332 ; perimeter
 G1 X106.176 Y137.443 E8.93211 ; perimeter
 G1 X106.593 Y137.800 F12000.000 ; move to first perimeter point
 G1 X106.593 Y134.000 E9.04493 F7200.000 ; perimeter
 G1 X107.835 Y134.000 E9.08179 ; perimeter
 G1 X108.207 Y136.222 E9.14869 ; perimeter
 G1 X108.207 Y137.482 E9.18611 ; perimeter
 G1 X107.772 Y138.311 E9.21389 ; perimeter
 G1 X107.001 Y138.843 E9.24168 ; perimeter
 G1 X105.706 Y139.000 E9.28043 ; perimeter
 G1 X103.880 Y139.000 E9.33464 ; perimeter
 G1 X103.880 Y137.800 E9.37027 ; perimeter
 G1 X106.533 Y137.800 E9.44905 ; perimeter
 G1 X107.818 Y137.597 F12000.000 ; move to first infill point
 G1 X107.818 Y135.966 E9.52927 F7200.000 ; infill
 G1 X107.226 Y134.221 F12000.000 ; move to first infill point
 G1 X107.226 Y138.407 E9.73514 F7200.000 ; infill
 G1 X106.635 Y138.683 E9.76726 ; infill
 G1 X106.635 Y138.001 E9.80080 ; infill
 G1 X106.043 Y138.001 E9.82989 ; infill
 G1 X106.043 Y138.755 E9.86696 ; infill
 G1 X105.452 Y138.779 E9.89608 ; infill
 G1 X105.452 Y138.001 E9.93432 ; infill
 G1 X104.860 Y138.001 E9.96341 ; infill
 G1 X104.860 Y138.779 E10.00165 ; infill
 G1 X104.269 Y138.779 E10.03074 ; infill
 G1 X104.269 Y138.001 E10.06898 ; infill
 G1 F9600
 G1 X104.269 Y138.779 E9.88438 ; wipe and retract
 G1 F9600
 G1 X104.860 Y138.779 E9.74389 ; wipe and retract
 G1 F9600
 G1 X104.860 Y138.001 E9.55929 ; wipe and retract
 G1 F9600
 G1 X105.452 Y138.001 E9.41879 ; wipe and retract
 G1 F9600
 G1 X105.452 Y138.779 E9.23420 ; wipe and retract
 G1 F9600
 G1 X106.043 Y138.755 E9.09359 ; wipe and retract
 G1 F9600
 G1 X106.043 Y138.001 E8.91461 ; wipe and retract
 G1 F9600
 G1 X106.635 Y138.001 E8.77412 ; wipe and retract
 G1 F9600
 G1 X106.635 Y138.683 E8.61220 ; wipe and retract
 G1 F9600
 G1 X107.226 Y138.407 E8.45712 ; wipe and retract
 G1 F9600
 G1 X107.226 Y134.221 E7.46309 ; wipe and retract
 G1 E5.06898 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.400 F12000.000 ; lift Z
 G1 X104.987 Y132.615 F12000.000 ; move to first infill point
 G1 Z4.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X102.273 Y132.615 E5.17081 F1800.000 ; infill
 G1 F9600
 G1 X104.987 Y132.615 E4.52638 ; wipe and retract
 G1 E0.17081 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.400 F12000.000 ; lift Z
 G1 X104.430 Y102.815 F12000.000 ; move to first perimeter point
 G1 Z4.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X101.979 Y102.815 E5.07276 F7200.000 ; perimeter
 G1 X100.201 Y91.215 E5.42120 ; perimeter
 G1 X102.490 Y91.215 E5.48916 ; perimeter
 G1 X104.420 Y102.755 E5.83658 ; perimeter
 G1 X104.073 Y102.634 F12000.000 ; move inwards before travel
 G1 X104.008 Y102.458 F12000.000 ; move to first perimeter point
 G1 X102.286 Y102.458 E5.88771 F7200.000 ; perimeter
 G1 X100.617 Y91.572 E6.21470 ; perimeter
 G1 X102.188 Y91.572 E6.26133 ; perimeter
 G1 X103.998 Y102.398 E6.58725 ; perimeter
 G1 X103.586 Y102.100 F12000.000 ; move to first perimeter point
 G1 X102.593 Y102.100 E6.61677 F7200.000 ; perimeter
 G1 X101.033 Y91.929 E6.92230 ; perimeter
 G1 X101.885 Y91.929 E6.94761 ; perimeter
 G1 X103.577 Y102.041 E7.25203 ; perimeter
 G1 X103.165 Y101.743 F12000.000 ; move to first perimeter point
 G1 X102.899 Y101.743 E7.25992 F7200.000 ; perimeter
 G1 X102.350 Y98.160 E7.36755 ; perimeter
 G1 X102.560 Y98.126 E7.37387 ; perimeter
 G1 X103.155 Y101.684 E7.48097 ; perimeter
 G1 X102.427 Y97.967 F12000.000 ; move to first infill point
 G1 X101.487 Y92.107 E7.85455 F1800.000 ; infill
 G1 F9600
 G1 X102.427 Y97.967 E6.44511 ; wipe and retract
 G1 E2.85455 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.400 F12000.000 ; lift Z
 G1 X95.608 Y123.815 F12000.000 ; move to first perimeter point
 G1 Z4.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X95.608 Y132.215 E5.24941 F7200.000 ; perimeter
 G1 X101.522 Y132.215 E5.42498 ; perimeter
 G1 X101.522 Y133.015 E5.44874 ; perimeter
 G1 X98.808 Y133.015 E5.52930 ; perimeter
 G1 X98.808 Y136.015 E5.61837 ; perimeter
 G1 X101.522 Y136.015 E5.69894 ; perimeter
 G1 X101.522 Y140.785 E5.84059 ; perimeter
 G1 X93.363 Y140.785 E6.08284 ; perimeter
 G1 X91.653 Y140.137 E6.13713 ; perimeter
 G1 X90.449 Y138.778 E6.19105 ; perimeter
 G1 X90.008 Y136.991 E6.24569 ; perimeter
 G1 X90.507 Y59.215 E8.55502 ; perimeter
 G1 X96.608 Y59.215 E8.73617 ; perimeter
 G1 X96.608 Y69.215 E9.03308 ; perimeter
 G1 X98.811 Y69.215 E9.09849 ; perimeter
 G1 X101.085 Y82.815 E9.50790 ; perimeter
 G1 X98.914 Y82.815 E9.57238 ; perimeter
 G1 X97.105 Y71.015 E9.92683 ; perimeter
 G1 X92.884 Y71.015 E10.05215 ; perimeter
 G1 X92.608 Y118.036 E11.44831 ; perimeter
 G1 X92.875 Y119.220 E11.48433 ; perimeter
 G1 X93.635 Y120.155 E11.52011 ; perimeter
 G1 X94.703 Y120.597 E11.55443 ; perimeter
 G1 X101.631 Y120.597 E11.76013 ; perimeter
 G1 X102.742 Y120.450 E11.79339 ; perimeter
 G1 X103.689 Y119.737 E11.82860 ; perimeter
 G1 X104.219 Y118.635 E11.86491 ; perimeter
 G1 X104.219 Y117.425 E11.90083 ; perimeter
 G1 X103.267 Y111.215 E12.08737 ; perimeter
 G1 X105.835 Y111.215 E12.16361 ; perimeter
 G1 X107.942 Y123.815 E12.54291 ; perimeter
 G1 X95.668 Y123.815 E12.90733 ; perimeter
 G1 X95.208 Y123.815 F12000.000 ; move inwards before travel
 G1 X95.251 Y123.458 F12000.000 ; move to first perimeter point
 G1 X95.251 Y132.572 E13.17794 F7200.000 ; perimeter
 G1 X98.451 Y132.572 E13.27296 ; perimeter
 G1 X98.451 Y136.372 E13.38578 ; perimeter
 G1 X101.164 Y136.372 E13.46635 ; perimeter
 G1 X101.164 Y140.428 E13.58679 ; perimeter
 G1 X93.428 Y140.428 E13.81650 ; perimeter
 G1 X91.862 Y139.834 E13.86623 ; perimeter
 G1 X90.774 Y138.607 E13.91492 ; perimeter
 G1 X90.366 Y136.949 E13.96563 ; perimeter
 G1 X90.862 Y59.572 E16.26310 ; perimeter
 G1 X96.251 Y59.572 E16.42312 ; perimeter
 G1 X96.251 Y69.572 E16.72003 ; perimeter
 G1 X98.509 Y69.572 E16.78707 ; perimeter
 G1 X100.664 Y82.458 E17.17498 ; perimeter
 G1 X99.220 Y82.458 E17.21784 ; perimeter
 G1 X97.411 Y70.658 E17.57229 ; perimeter
 G1 X92.529 Y70.658 E17.71724 ; perimeter
 G1 X92.251 Y118.075 E19.12515 ; perimeter
 G1 X92.545 Y119.380 E19.16487 ; perimeter
 G1 X93.415 Y120.451 E19.20582 ; perimeter
 G1 X94.632 Y120.954 E19.24494 ; perimeter
 G1 X101.655 Y120.954 E19.45344 ; perimeter
 G1 X102.881 Y120.792 E19.49018 ; perimeter
 G1 X103.973 Y119.970 E19.53076 ; perimeter
 G1 X104.576 Y118.716 E19.57206 ; perimeter
 G1 X104.576 Y117.398 E19.61120 ; perimeter
 G1 X103.683 Y111.572 E19.78621 ; perimeter
 G1 X105.532 Y111.572 E19.84111 ; perimeter
 G1 X107.520 Y123.458 E20.19892 ; perimeter
 G1 X95.311 Y123.458 E20.56142 ; perimeter
 G1 X94.894 Y123.100 F12000.000 ; move to first perimeter point
 G1 X94.894 Y132.929 E20.85324 F7200.000 ; perimeter
 G1 X98.094 Y132.929 E20.94825 ; perimeter
 G1 X98.094 Y136.729 E21.06108 ; perimeter
 G1 X100.807 Y136.729 E21.14164 ; perimeter
 G1 X100.807 Y140.071 E21.24088 ; perimeter
 G1 X93.493 Y140.071 E21.45804 ; perimeter
 G1 X92.071 Y139.532 E21.50322 ; perimeter
 G1 X91.100 Y138.436 E21.54668 ; perimeter
 G1 X90.723 Y136.906 E21.59346 ; perimeter
 G1 X91.216 Y59.929 E23.87907 ; perimeter
 G1 X95.894 Y59.929 E24.01795 ; perimeter
 G1 X95.894 Y69.929 E24.31487 ; perimeter
 G1 X98.206 Y69.929 E24.38353 ; perimeter
 G1 X100.242 Y82.100 E24.74994 ; perimeter
 G1 X99.527 Y82.100 E24.77117 ; perimeter
 G1 X97.718 Y70.300 E25.12562 ; perimeter
 G1 X92.174 Y70.300 E25.29022 ; perimeter
 G1 X91.893 Y118.114 E26.70989 ; perimeter
 G1 X92.216 Y119.540 E26.75330 ; perimeter
 G1 X93.195 Y120.746 E26.79942 ; perimeter
 G1 X94.561 Y121.311 E26.84333 ; perimeter
 G1 X101.678 Y121.311 E27.05464 ; perimeter
 G1 X103.021 Y121.133 E27.09486 ; perimeter
 G1 X104.257 Y120.203 E27.14080 ; perimeter
 G1 X104.933 Y118.797 E27.18710 ; perimeter
 G1 X104.933 Y117.371 E27.22947 ; perimeter
 G1 X104.099 Y111.929 E27.39293 ; perimeter
 G1 X105.230 Y111.929 E27.42651 ; perimeter
 G1 X107.098 Y123.100 E27.76281 ; perimeter
 G1 X94.954 Y123.100 E28.12339 ; perimeter
 G1 X94.537 Y122.743 F12000.000 ; move to first perimeter point
 G1 X94.537 Y133.286 E28.43641 F7200.000 ; perimeter
 G1 X97.737 Y133.286 E28.53143 ; perimeter
 G1 X97.737 Y137.086 E28.64425 ; perimeter
 G1 X100.450 Y137.086 E28.72482 ; perimeter
 G1 X100.450 Y139.714 E28.80286 ; perimeter
 G1 X93.559 Y139.714 E29.00747 ; perimeter
 G1 X92.280 Y139.229 E29.04809 ; perimeter
 G1 X91.426 Y138.265 E29.08633 ; perimeter
 G1 X91.080 Y136.864 E29.12917 ; perimeter
 G1 X91.571 Y60.286 E31.40293 ; perimeter
 G1 X95.537 Y60.286 E31.52067 ; perimeter
 G1 X95.537 Y69.943 E31.80742 ; perimeter
 G1 X91.819 Y69.943 E31.91779 ; perimeter
 G1 X91.536 Y118.153 E33.34922 ; perimeter
 G1 X91.886 Y119.700 E33.39632 ; perimeter
 G1 X92.975 Y121.041 E33.44762 ; perimeter
 G1 X94.490 Y121.668 E33.49632 ; perimeter
 G1 X101.702 Y121.668 E33.71043 ; perimeter
 G1 X103.161 Y121.475 E33.75414 ; perimeter
 G1 X104.541 Y120.436 E33.80544 ; perimeter
 G1 X105.290 Y118.879 E33.85674 ; perimeter
 G1 X105.290 Y117.343 E33.90233 ; perimeter
 G1 X104.515 Y112.286 E34.05425 ; perimeter
 G1 X104.928 Y112.286 E34.06650 ; perimeter
 G1 X106.677 Y122.743 E34.38131 ; perimeter
 G1 X94.597 Y122.743 E34.73997 ; perimeter
 G1 F9600
 G1 X94.537 Y133.286 E32.23609 ; wipe and retract
 G1 F9600
 G1 X97.737 Y133.286 E31.47609 ; wipe and retract
 G1 F9600
 G1 X97.737 Y137.086 E30.57359 ; wipe and retract
 G1 F9600
 G1 X100.194 Y137.086 E29.98997 ; wipe and retract
 G1 E29.73997 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.400 F12000.000 ; lift Z
 G1 X95.180 Y69.586 F12000.000 ; move to first perimeter point
 G1 Z4.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.869 Y69.586 E5.09831 F7200.000 ; perimeter
 G1 X91.926 Y60.643 E5.36386 ; perimeter
 G1 X95.180 Y60.643 E5.46047 ; perimeter
 G1 X95.180 Y69.526 E5.72422 ; perimeter
 G1 X94.823 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.228 Y69.229 E5.80126 F7200.000 ; perimeter
 G1 X92.281 Y61.000 E6.04560 ; perimeter
 G1 X94.823 Y61.000 E6.12108 ; perimeter
 G1 X94.823 Y69.169 E6.36363 ; perimeter
 G1 F9600
 G1 X92.228 Y69.229 E5.74724 ; wipe and retract
 G1 F9600
 G1 X92.281 Y61.000 E3.79276 ; wipe and retract
 G1 F9600
 G1 X94.823 Y61.000 E3.18906 ; wipe and retract
 G1 F9600
 G1 X94.823 Y67.633 E1.61363 ; wipe and retract
 G1 E1.36363 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.400 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z4.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X100.093 Y137.443 E5.62263 ; perimeter
 G1 X100.093 Y139.357 E5.67946 ; perimeter
 G1 X93.624 Y139.357 E5.87153 ; perimeter
 G1 X92.488 Y138.926 E5.90760 ; perimeter
 G1 X91.751 Y138.094 E5.94061 ; perimeter
 G1 X91.438 Y136.822 E5.97951 ; perimeter
 G1 X91.546 Y119.849 E6.48347 ; perimeter
 G1 X92.754 Y121.337 E6.54037 ; perimeter
 G1 X94.419 Y122.025 E6.59387 ; perimeter
 G1 X101.725 Y122.025 E6.81079 ; perimeter
 G1 X103.301 Y121.817 E6.85798 ; perimeter
 G1 X104.825 Y120.669 E6.91464 ; perimeter
 G1 X105.561 Y119.141 E6.96498 ; perimeter
 G1 X105.716 Y119.163 E6.96963 ; perimeter
 G1 X106.255 Y122.386 E7.06666 ; perimeter
 G1 X94.240 Y122.386 E7.42340 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E7.42798 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E7.47640 ; perimeter
 G1 X105.394 Y120.311 E7.49588 ; perimeter
 G1 X105.549 Y120.333 E7.50054 ; perimeter
 G1 X105.833 Y122.029 E7.55161 ; perimeter
 G1 X103.916 Y122.029 E7.60854 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E7.56522 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.17786 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E7.02204 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E6.98480 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E6.57630 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.12090 ; wipe and retract
 G1 E2.60854 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.400 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z4.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X99.736 Y137.800 E5.28840 ; perimeter
 G1 X99.736 Y139.000 E5.32403 ; perimeter
 G1 X93.690 Y139.000 E5.50356 ; perimeter
 G1 X92.697 Y138.624 E5.53507 ; perimeter
 G1 X92.077 Y137.923 E5.56285 ; perimeter
 G1 X91.795 Y136.780 E5.59782 ; perimeter
 G1 X91.897 Y120.847 E6.07088 ; perimeter
 G1 X92.534 Y121.632 E6.10090 ; perimeter
 G1 X93.823 Y122.165 E6.14229 ; perimeter
 G1 X93.823 Y133.940 E6.49191 ; perimeter
 G1 X93.975 Y134.201 F12000.000 ; move to first infill point
 G1 X93.975 Y138.779 E6.71912 F7200.000 ; infill
 G1 X94.572 Y138.779 E6.74875 ; infill
 G1 X94.572 Y134.201 E6.97596 ; infill
 G1 X95.169 Y134.201 E7.00559 ; infill
 G1 X95.169 Y138.779 E7.23280 ; infill
 G1 X95.766 Y138.779 E7.26244 ; infill
 G1 X95.766 Y134.201 E7.48965 ; infill
 G1 X96.363 Y134.201 E7.51928 ; infill
 G1 X96.363 Y138.779 E7.74649 ; infill
 G1 X96.960 Y138.001 E7.79514 ; infill
 G1 X96.960 Y138.779 E7.83372 ; infill
 G1 X97.557 Y138.779 E7.86335 ; infill
 G1 X97.557 Y138.001 E7.90194 ; infill
 G1 X98.154 Y138.001 E7.93157 ; infill
 G1 X98.154 Y138.779 E7.97015 ; infill
 G1 X98.751 Y138.779 E7.99978 ; infill
 G1 X98.751 Y138.001 E8.03837 ; infill
 G1 X99.348 Y138.001 E8.06800 ; infill
 G1 X99.348 Y138.779 E8.10658 ; infill
 G1 X93.378 Y138.655 F12000.000 ; move to first infill point
 G1 X93.378 Y122.213 E8.92275 F7200.000 ; infill
 G1 X92.781 Y121.966 E8.95482 ; infill
 G1 X92.781 Y138.329 E9.76709 ; infill
 G1 X92.184 Y136.985 F12000.000 ; move to first infill point
 G1 X92.184 Y133.448 E9.94264 F7200.000 ; infill
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X101.343 Y132.615 E10.11345 F1800.000 ; infill
 G1 F9600
 G1 X98.630 Y132.615 E9.46902 ; wipe and retract
 G1 E5.11345 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.400 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z4.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X104.774 Y121.808 F12000.000 ; move to first infill point
 G1 X104.774 Y121.449 E5.07163 F7200.000 ; infill
 G1 X105.374 Y121.352 E5.10194 ; infill
 G1 X105.374 Y121.808 E5.12466 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.931 E5.19069 F1800.000 ; infill
 G1 X105.579 Y117.931 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.20886 F1800.000 ; infill
 G1 X104.750 Y112.464 E5.35489 ; infill
 G1 F9600
 G1 X105.528 Y117.321 E4.18681 ; wipe and retract
 G1 F9600
 G1 X105.579 Y117.931 E4.04146 ; wipe and retract
 G1 E0.35489 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.400 F12000.000 ; lift Z
 G1 X91.388 Y118.357 F12000.000 ; move to first infill point
 G1 Z4.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.491 Y119.308 E5.02840 F1800.000 ; infill
 G1 X91.703 Y119.744 E5.04280 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E4.92765 ; wipe and retract
 G1 F9600
 G1 X91.388 Y118.357 E4.70044 ; wipe and retract
 G1 E0.04280 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.400 F12000.000 ; lift Z
 G1 X99.855 Y81.922 F12000.000 ; move to first infill point
 G1 Z4.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.594 Y74.053 E5.50170 F1800.000 ; infill
 G1 X98.594 Y74.053 F12000.000 ; move to first infill point
 G1 X97.962 Y70.107 E5.62034 F1800.000 ; infill
 G1 X94.434 Y69.008 F12000.000 ; move to first infill point
 G1 X94.434 Y61.221 E6.01207 F7200.000 ; infill
 G1 X93.829 Y61.221 E6.04251 ; infill
 G1 X93.829 Y69.008 E6.43425 ; infill
 G1 X93.224 Y69.008 E6.46469 ; infill
 G1 X93.224 Y61.221 E6.85643 ; infill
 G1 X92.619 Y65.552 F12000.000 ; move to first infill point
 G1 X92.619 Y69.008 E7.03028 F7200.000 ; infill
 G1 F9600
 G1 X92.619 Y65.552 E6.20958 ; wipe and retract
 G1 E2.03028 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.400 F12000.000 ; lift Z
 G1 X104.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z4.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X102.441 Y133.015 E5.07028 F7200.000 ; perimeter
 G1 X102.441 Y132.215 E5.09403 ; perimeter
 G1 X109.346 Y132.215 E5.29906 ; perimeter
 G1 X109.992 Y136.074 E5.41524 ; perimeter
 G1 X109.992 Y137.923 E5.47013 ; perimeter
 G1 X109.148 Y139.531 E5.52405 ; perimeter
 G1 X107.653 Y140.562 E5.57797 ; perimeter
 G1 X105.814 Y140.785 E5.63299 ; perimeter
 G1 X102.441 Y140.785 E5.73313 ; perimeter
 G1 X102.441 Y136.015 E5.87478 ; perimeter
 G1 X104.808 Y136.015 E5.94506 ; perimeter
 G1 X104.808 Y133.075 E6.03235 ; perimeter
 G1 X104.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X105.165 Y136.372 F12000.000 ; move to first perimeter point
 G1 X105.165 Y132.572 E6.14518 F7200.000 ; perimeter
 G1 X109.044 Y132.572 E6.26035 ; perimeter
 G1 X109.635 Y136.104 E6.36667 ; perimeter
 G1 X109.635 Y137.835 E6.41807 ; perimeter
 G1 X108.873 Y139.287 E6.46676 ; perimeter
 G1 X107.523 Y140.218 E6.51545 ; perimeter
 G1 X105.792 Y140.428 E6.56722 ; perimeter
 G1 X102.798 Y140.428 E6.65612 ; perimeter
 G1 X102.798 Y136.372 E6.77656 ; perimeter
 G1 X105.105 Y136.372 E6.84506 ; perimeter
 G1 X105.522 Y136.729 F12000.000 ; move to first perimeter point
 G1 X105.522 Y132.929 E6.95789 F7200.000 ; perimeter
 G1 X108.742 Y132.929 E7.05348 ; perimeter
 G1 X109.278 Y136.133 E7.14995 ; perimeter
 G1 X109.278 Y137.747 E7.19785 ; perimeter
 G1 X108.597 Y139.043 E7.24131 ; perimeter
 G1 X107.393 Y139.874 E7.28478 ; perimeter
 G1 X105.771 Y140.071 E7.33329 ; perimeter
 G1 X103.155 Y140.071 E7.41095 ; perimeter
 G1 X103.155 Y136.729 E7.51019 ; perimeter
 G1 X105.462 Y136.729 E7.57869 ; perimeter
 G1 X105.879 Y137.086 F12000.000 ; move to first perimeter point
 G1 X105.879 Y133.286 E7.69151 F7200.000 ; perimeter
 G1 X108.440 Y133.286 E7.76753 ; perimeter
 G1 X108.921 Y136.163 E7.85414 ; perimeter
 G1 X108.921 Y137.659 E7.89854 ; perimeter
 G1 X108.322 Y138.799 E7.93678 ; perimeter
 G1 X107.262 Y139.530 E7.97502 ; perimeter
 G1 X105.749 Y139.714 E8.02028 ; perimeter
 G1 X103.512 Y139.714 E8.08669 ; perimeter
 G1 X103.512 Y137.086 E8.16473 ; perimeter
 G1 X105.819 Y137.086 E8.23323 ; perimeter
 G1 X106.236 Y137.443 F12000.000 ; move to first perimeter point
 G1 X106.236 Y133.643 E8.34605 F7200.000 ; perimeter
 G1 X108.137 Y133.643 E8.40249 ; perimeter
 G1 X108.564 Y136.193 E8.47924 ; perimeter
 G1 X108.564 Y137.571 E8.52016 ; perimeter
 G1 X108.047 Y138.555 E8.55317 ; perimeter
 G1 X107.132 Y139.187 E8.58618 ; perimeter
 G1 X105.728 Y139.357 E8.62818 ; perimeter
 G1 X103.869 Y139.357 E8.68335 ; perimeter
 G1 X103.869 Y137.443 E8.74019 ; perimeter
 G1 X106.176 Y137.443 E8.80868 ; perimeter
 G1 X106.593 Y137.800 F12000.000 ; move to first perimeter point
 G1 X106.593 Y134.000 E8.92151 F7200.000 ; perimeter
 G1 X107.835 Y134.000 E8.95837 ; perimeter
 G1 X108.207 Y136.222 E9.02527 ; perimeter
 G1 X108.207 Y137.482 E9.06269 ; perimeter
 G1 X107.772 Y138.311 E9.09047 ; perimeter
 G1 X107.001 Y138.843 E9.11826 ; perimeter
 G1 X105.706 Y139.000 E9.15700 ; perimeter
 G1 X104.226 Y139.000 E9.20093 ; perimeter
 G1 X104.226 Y137.800 E9.23656 ; perimeter
 G1 X106.533 Y137.800 E9.30506 ; perimeter
 G1 X104.448 Y138.611 F12000.000 ; move to first infill point
 G1 X106.015 Y138.611 E9.38370 F7200.000 ; infill
 G1 X106.795 Y138.008 E9.43314 ; infill
 G1 X107.681 Y138.008 E9.47761 ; infill
 G1 X107.985 Y137.405 E9.51149 ; infill
 G1 X106.795 Y137.405 E9.57120 ; infill
 G1 X106.795 Y136.802 E9.60146 ; infill
 G1 X107.985 Y136.802 E9.66117 ; infill
 G1 X107.985 Y136.198 E9.69143 ; infill
 G1 X106.795 Y136.198 E9.75114 ; infill
 G1 X106.795 Y135.595 E9.78140 ; infill
 G1 X107.895 Y135.595 E9.83659 ; infill
 G1 X107.794 Y134.992 E9.86728 ; infill
 G1 X106.795 Y134.992 E9.91741 ; infill
 G1 X106.795 Y134.388 E9.94767 ; infill
 G1 X107.693 Y134.388 E9.99274 ; infill
 G1 X104.987 Y132.615 F12000.000 ; move to first infill point
 G1 X102.620 Y132.615 E10.14174 F1800.000 ; infill
 G1 F9600
 G1 X104.987 Y132.615 E9.57958 ; wipe and retract
 G1 E5.14174 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.600 F12000.000 ; lift Z
 G1 X104.430 Y102.815 F12000.000 ; move to first perimeter point
 G1 Z4.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X101.979 Y102.815 E5.07276 F7200.000 ; perimeter
 G1 X100.201 Y91.215 E5.42120 ; perimeter
 G1 X102.490 Y91.215 E5.48916 ; perimeter
 G1 X104.420 Y102.755 E5.83658 ; perimeter
 G1 X104.073 Y102.634 F12000.000 ; move inwards before travel
 G1 X104.008 Y102.458 F12000.000 ; move to first perimeter point
 G1 X102.286 Y102.458 E5.88771 F7200.000 ; perimeter
 G1 X100.617 Y91.572 E6.21470 ; perimeter
 G1 X102.188 Y91.572 E6.26133 ; perimeter
 G1 X103.998 Y102.398 E6.58725 ; perimeter
 G1 X103.586 Y102.100 F12000.000 ; move to first perimeter point
 G1 X102.593 Y102.100 E6.61677 F7200.000 ; perimeter
 G1 X101.033 Y91.929 E6.92230 ; perimeter
 G1 X101.885 Y91.929 E6.94761 ; perimeter
 G1 X103.577 Y102.041 E7.25203 ; perimeter
 G1 X103.165 Y101.743 F12000.000 ; move to first perimeter point
 G1 X102.899 Y101.743 E7.25992 F7200.000 ; perimeter
 G1 X102.350 Y98.160 E7.36755 ; perimeter
 G1 X102.560 Y98.127 E7.37387 ; perimeter
 G1 X103.155 Y101.684 E7.48096 ; perimeter
 G1 X102.427 Y97.967 F12000.000 ; move to first infill point
 G1 X101.487 Y92.107 E7.85455 F1800.000 ; infill
 G1 F9600
 G1 X102.427 Y97.967 E6.44509 ; wipe and retract
 G1 E2.85455 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.600 F12000.000 ; lift Z
 G1 X95.608 Y123.815 F12000.000 ; move to first perimeter point
 G1 Z4.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X95.608 Y132.215 E5.24941 F7200.000 ; perimeter
 G1 X101.175 Y132.215 E5.41470 ; perimeter
 G1 X101.175 Y133.015 E5.43845 ; perimeter
 G1 X98.808 Y133.015 E5.50873 ; perimeter
 G1 X98.808 Y136.015 E5.59780 ; perimeter
 G1 X101.175 Y136.015 E5.66808 ; perimeter
 G1 X101.175 Y140.785 E5.80973 ; perimeter
 G1 X93.363 Y140.785 E6.04170 ; perimeter
 G1 X91.653 Y140.137 E6.09599 ; perimeter
 G1 X90.449 Y138.778 E6.14991 ; perimeter
 G1 X90.008 Y136.991 E6.20455 ; perimeter
 G1 X90.507 Y59.215 E8.51388 ; perimeter
 G1 X96.608 Y59.215 E8.69503 ; perimeter
 G1 X96.608 Y69.215 E8.99194 ; perimeter
 G1 X98.811 Y69.215 E9.05735 ; perimeter
 G1 X101.085 Y82.815 E9.46676 ; perimeter
 G1 X98.914 Y82.815 E9.53124 ; perimeter
 G1 X97.105 Y71.015 E9.88569 ; perimeter
 G1 X92.884 Y71.015 E10.01101 ; perimeter
 G1 X92.608 Y118.036 E11.40717 ; perimeter
 G1 X92.875 Y119.220 E11.44319 ; perimeter
 G1 X93.635 Y120.155 E11.47897 ; perimeter
 G1 X94.703 Y120.597 E11.51329 ; perimeter
 G1 X101.631 Y120.597 E11.71899 ; perimeter
 G1 X102.742 Y120.450 E11.75225 ; perimeter
 G1 X103.689 Y119.737 E11.78746 ; perimeter
 G1 X104.219 Y118.635 E11.82377 ; perimeter
 G1 X104.219 Y117.425 E11.85969 ; perimeter
 G1 X103.267 Y111.215 E12.04623 ; perimeter
 G1 X105.835 Y111.215 E12.12247 ; perimeter
 G1 X107.942 Y123.815 E12.50177 ; perimeter
 G1 X95.668 Y123.815 E12.86619 ; perimeter
 G1 X95.208 Y123.815 F12000.000 ; move inwards before travel
 G1 X95.251 Y123.458 F12000.000 ; move to first perimeter point
 G1 X95.251 Y132.572 E13.13680 F7200.000 ; perimeter
 G1 X98.451 Y132.572 E13.23182 ; perimeter
 G1 X98.451 Y136.372 E13.34464 ; perimeter
 G1 X100.818 Y136.372 E13.41492 ; perimeter
 G1 X100.818 Y140.428 E13.53537 ; perimeter
 G1 X93.428 Y140.428 E13.75479 ; perimeter
 G1 X91.862 Y139.834 E13.80452 ; perimeter
 G1 X90.774 Y138.607 E13.85321 ; perimeter
 G1 X90.366 Y136.949 E13.90392 ; perimeter
 G1 X90.862 Y59.572 E16.20139 ; perimeter
 G1 X96.251 Y59.572 E16.36141 ; perimeter
 G1 X96.251 Y69.572 E16.65832 ; perimeter
 G1 X98.509 Y69.572 E16.72536 ; perimeter
 G1 X100.664 Y82.458 E17.11327 ; perimeter
 G1 X99.220 Y82.458 E17.15613 ; perimeter
 G1 X97.411 Y70.658 E17.51058 ; perimeter
 G1 X92.529 Y70.658 E17.65553 ; perimeter
 G1 X92.251 Y118.075 E19.06344 ; perimeter
 G1 X92.545 Y119.380 E19.10316 ; perimeter
 G1 X93.415 Y120.451 E19.14411 ; perimeter
 G1 X94.632 Y120.954 E19.18323 ; perimeter
 G1 X101.655 Y120.954 E19.39173 ; perimeter
 G1 X102.881 Y120.792 E19.42847 ; perimeter
 G1 X103.973 Y119.970 E19.46905 ; perimeter
 G1 X104.576 Y118.716 E19.51035 ; perimeter
 G1 X104.576 Y117.398 E19.54949 ; perimeter
 G1 X103.683 Y111.572 E19.72450 ; perimeter
 G1 X105.532 Y111.572 E19.77940 ; perimeter
 G1 X107.520 Y123.458 E20.13721 ; perimeter
 G1 X95.311 Y123.458 E20.49971 ; perimeter
 G1 X94.894 Y123.100 F12000.000 ; move to first perimeter point
 G1 X94.894 Y132.929 E20.79153 F7200.000 ; perimeter
 G1 X98.094 Y132.929 E20.88654 ; perimeter
 G1 X98.094 Y136.729 E20.99937 ; perimeter
 G1 X100.461 Y136.729 E21.06964 ; perimeter
 G1 X100.461 Y140.071 E21.16889 ; perimeter
 G1 X93.493 Y140.071 E21.37576 ; perimeter
 G1 X92.071 Y139.532 E21.42094 ; perimeter
 G1 X91.100 Y138.436 E21.46440 ; perimeter
 G1 X90.723 Y136.906 E21.51118 ; perimeter
 G1 X91.216 Y59.929 E23.79679 ; perimeter
 G1 X95.894 Y59.929 E23.93567 ; perimeter
 G1 X95.894 Y69.929 E24.23259 ; perimeter
 G1 X98.206 Y69.929 E24.30125 ; perimeter
 G1 X100.242 Y82.100 E24.66766 ; perimeter
 G1 X99.527 Y82.100 E24.68889 ; perimeter
 G1 X97.718 Y70.300 E25.04334 ; perimeter
 G1 X92.174 Y70.300 E25.20794 ; perimeter
 G1 X91.893 Y118.114 E26.62761 ; perimeter
 G1 X92.216 Y119.540 E26.67102 ; perimeter
 G1 X93.195 Y120.746 E26.71714 ; perimeter
 G1 X94.561 Y121.311 E26.76105 ; perimeter
 G1 X101.678 Y121.311 E26.97236 ; perimeter
 G1 X103.021 Y121.133 E27.01258 ; perimeter
 G1 X104.257 Y120.203 E27.05852 ; perimeter
 G1 X104.933 Y118.797 E27.10482 ; perimeter
 G1 X104.933 Y117.371 E27.14719 ; perimeter
 G1 X104.099 Y111.929 E27.31065 ; perimeter
 G1 X105.230 Y111.929 E27.34423 ; perimeter
 G1 X107.098 Y123.100 E27.68053 ; perimeter
 G1 X94.954 Y123.100 E28.04111 ; perimeter
 G1 X94.537 Y122.743 F12000.000 ; move to first perimeter point
 G1 X94.537 Y133.286 E28.35413 F7200.000 ; perimeter
 G1 X97.737 Y133.286 E28.44915 ; perimeter
 G1 X97.737 Y137.086 E28.56197 ; perimeter
 G1 X100.104 Y137.086 E28.63225 ; perimeter
 G1 X100.104 Y139.714 E28.71029 ; perimeter
 G1 X93.559 Y139.714 E28.90462 ; perimeter
 G1 X92.280 Y139.229 E28.94524 ; perimeter
 G1 X91.426 Y138.265 E28.98348 ; perimeter
 G1 X91.080 Y136.864 E29.02632 ; perimeter
 G1 X91.571 Y60.286 E31.30008 ; perimeter
 G1 X95.537 Y60.286 E31.41782 ; perimeter
 G1 X95.537 Y69.943 E31.70457 ; perimeter
 G1 X91.819 Y69.943 E31.81494 ; perimeter
 G1 X91.536 Y118.153 E33.24637 ; perimeter
 G1 X91.886 Y119.700 E33.29347 ; perimeter
 G1 X92.975 Y121.041 E33.34477 ; perimeter
 G1 X94.490 Y121.668 E33.39347 ; perimeter
 G1 X101.702 Y121.668 E33.60758 ; perimeter
 G1 X103.161 Y121.475 E33.65129 ; perimeter
 G1 X104.541 Y120.436 E33.70259 ; perimeter
 G1 X105.290 Y118.879 E33.75389 ; perimeter
 G1 X105.290 Y117.343 E33.79948 ; perimeter
 G1 X104.515 Y112.286 E33.95140 ; perimeter
 G1 X104.928 Y112.286 E33.96365 ; perimeter
 G1 X106.677 Y122.743 E34.27846 ; perimeter
 G1 X94.597 Y122.743 E34.63712 ; perimeter
 G1 F9600
 G1 X94.537 Y133.286 E32.13324 ; wipe and retract
 G1 F9600
 G1 X97.737 Y133.286 E31.37324 ; wipe and retract
 G1 F9600
 G1 X97.737 Y137.086 E30.47074 ; wipe and retract
 G1 F9600
 G1 X100.104 Y137.086 E29.90858 ; wipe and retract
 G1 F9600
 G1 X100.104 Y137.176 E29.88712 ; wipe and retract
 G1 E29.63712 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.600 F12000.000 ; lift Z
 G1 X95.180 Y69.586 F12000.000 ; move to first perimeter point
 G1 Z4.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.869 Y69.586 E5.09831 F7200.000 ; perimeter
 G1 X91.926 Y60.643 E5.36386 ; perimeter
 G1 X95.180 Y60.643 E5.46047 ; perimeter
 G1 X95.180 Y69.526 E5.72422 ; perimeter
 G1 X94.823 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.228 Y69.229 E5.80126 F7200.000 ; perimeter
 G1 X92.281 Y61.000 E6.04560 ; perimeter
 G1 X94.823 Y61.000 E6.12108 ; perimeter
 G1 X94.823 Y69.169 E6.36363 ; perimeter
 G1 F9600
 G1 X92.228 Y69.229 E5.74724 ; wipe and retract
 G1 F9600
 G1 X92.281 Y61.000 E3.79276 ; wipe and retract
 G1 F9600
 G1 X94.823 Y61.000 E3.18906 ; wipe and retract
 G1 F9600
 G1 X94.823 Y67.633 E1.61363 ; wipe and retract
 G1 E1.36363 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.600 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z4.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X99.747 Y137.443 E5.61234 ; perimeter
 G1 X99.747 Y139.357 E5.66918 ; perimeter
 G1 X93.624 Y139.357 E5.85096 ; perimeter
 G1 X92.488 Y138.926 E5.88703 ; perimeter
 G1 X91.751 Y138.094 E5.92004 ; perimeter
 G1 X91.438 Y136.822 E5.95894 ; perimeter
 G1 X91.546 Y119.849 E6.46290 ; perimeter
 G1 X92.754 Y121.337 E6.51980 ; perimeter
 G1 X94.419 Y122.025 E6.57330 ; perimeter
 G1 X101.725 Y122.025 E6.79022 ; perimeter
 G1 X103.301 Y121.817 E6.83741 ; perimeter
 G1 X104.825 Y120.669 E6.89407 ; perimeter
 G1 X105.561 Y119.141 E6.94441 ; perimeter
 G1 X105.716 Y119.163 E6.94906 ; perimeter
 G1 X106.255 Y122.386 E7.04609 ; perimeter
 G1 X94.240 Y122.386 E7.40283 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E7.40741 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E7.45583 ; perimeter
 G1 X105.394 Y120.311 E7.47531 ; perimeter
 G1 X105.549 Y120.333 E7.47997 ; perimeter
 G1 X105.833 Y122.029 E7.53104 ; perimeter
 G1 X103.916 Y122.029 E7.58797 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E7.54465 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.15729 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E7.00147 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E6.96423 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E6.55573 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.10033 ; wipe and retract
 G1 E2.58797 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.600 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z4.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X99.390 Y137.800 E5.27812 ; perimeter
 G1 X99.390 Y139.000 E5.31375 ; perimeter
 G1 X93.690 Y139.000 E5.48299 ; perimeter
 G1 X92.697 Y138.624 E5.51450 ; perimeter
 G1 X92.077 Y137.923 E5.54228 ; perimeter
 G1 X91.795 Y136.780 E5.57725 ; perimeter
 G1 X91.897 Y120.847 E6.05031 ; perimeter
 G1 X92.534 Y121.632 E6.08033 ; perimeter
 G1 X93.823 Y122.165 E6.12172 ; perimeter
 G1 X93.823 Y133.940 E6.47134 ; perimeter
 G1 X93.621 Y134.011 F12000.000 ; move to first infill point
 G1 X92.017 Y134.011 E6.54807 F7200.000 ; infill
 G1 X92.018 Y133.436 E6.57557 ; infill
 G1 X93.621 Y133.436 E6.65225 ; infill
 G1 X93.621 Y132.860 E6.67975 ; infill
 G1 X92.022 Y132.860 E6.75625 ; infill
 G1 X92.025 Y132.285 E6.78375 ; infill
 G1 X93.621 Y132.285 E6.86008 ; infill
 G1 X93.621 Y131.710 E6.88758 ; infill
 G1 X92.029 Y131.710 E6.96373 ; infill
 G1 X92.033 Y131.135 E6.99123 ; infill
 G1 X93.621 Y131.135 E7.06720 ; infill
 G1 X93.621 Y130.560 E7.09470 ; infill
 G1 X92.036 Y130.560 E7.17050 ; infill
 G1 X92.040 Y129.985 E7.19800 ; infill
 G1 X93.621 Y129.985 E7.27362 ; infill
 G1 X93.621 Y129.410 E7.30112 ; infill
 G1 X92.044 Y129.410 E7.37656 ; infill
 G1 X92.047 Y128.835 E7.40406 ; infill
 G1 X93.621 Y128.835 E7.47933 ; infill
 G1 X93.621 Y128.260 E7.50683 ; infill
 G1 X92.051 Y128.260 E7.58192 ; infill
 G1 X92.055 Y127.685 E7.60943 ; infill
 G1 X93.621 Y127.685 E7.68434 ; infill
 G1 X93.621 Y127.109 E7.71184 ; infill
 G1 X92.058 Y127.109 E7.78658 ; infill
 G1 X92.062 Y126.534 E7.81408 ; infill
 G1 X93.621 Y126.534 E7.88864 ; infill
 G1 X93.621 Y125.959 E7.91614 ; infill
 G1 X92.066 Y125.959 E7.99053 ; infill
 G1 X92.069 Y125.384 E8.01803 ; infill
 G1 X93.621 Y125.384 E8.09224 ; infill
 G1 X93.621 Y124.809 E8.11974 ; infill
 G1 X92.073 Y124.809 E8.19377 ; infill
 G1 X92.077 Y124.234 E8.22128 ; infill
 G1 X93.621 Y124.234 E8.29513 ; infill
 G1 X93.621 Y123.659 E8.32263 ; infill
 G1 X92.081 Y123.659 E8.39631 ; infill
 G1 X92.084 Y123.084 E8.42382 ; infill
 G1 X93.621 Y123.084 E8.49732 ; infill
 G1 X93.621 Y122.509 E8.52482 ; infill
 G1 X92.088 Y122.509 E8.59815 ; infill
 G1 X92.092 Y121.934 E8.62565 ; infill
 G1 X92.472 Y121.934 E8.64382 ; infill
 G1 X92.017 Y134.586 F12000.000 ; move to first infill point
 G1 X96.821 Y134.586 E8.87358 F7200.000 ; infill
 G1 X96.821 Y135.161 E8.90108 ; infill
 G1 X92.017 Y135.161 E9.13084 ; infill
 G1 X92.017 Y135.736 E9.15834 ; infill
 G1 X96.821 Y135.736 E9.38809 ; infill
 G1 X96.821 Y136.311 E9.41559 ; infill
 G1 X92.017 Y136.311 E9.64535 ; infill
 G1 X92.034 Y136.886 E9.67286 ; infill
 G1 X96.821 Y136.886 E9.90181 ; infill
 G1 X96.821 Y137.461 E9.92931 ; infill
 G1 X92.175 Y137.461 E10.15148 ; infill
 G1 X92.502 Y138.036 E10.18311 ; infill
 G1 X96.821 Y138.036 E10.38964 ; infill
 G1 X99.168 Y138.612 F12000.000 ; move to first infill point
 G1 X93.538 Y138.612 E10.65891 F7200.000 ; infill
 G1 X91.703 Y119.744 F12000.000 ; move to first infill point
 G1 X91.491 Y119.308 E10.67331 F1800.000 ; infill
 G1 X91.388 Y118.357 E10.70171 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E10.47450 ; wipe and retract
 G1 F9600
 G1 X91.703 Y119.744 E10.35935 ; wipe and retract
 G1 E5.70171 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.600 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z4.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X105.107 Y121.240 F12000.000 ; move to first infill point
 G1 X105.494 Y121.240 E5.07167 F7200.000 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.931 E5.13770 F1800.000 ; infill
 G1 X105.579 Y117.931 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.15587 F1800.000 ; infill
 G1 X104.750 Y112.464 E5.30190 ; infill
 G1 F9600
 G1 X105.528 Y117.321 E4.13382 ; wipe and retract
 G1 F9600
 G1 X105.579 Y117.931 E3.98847 ; wipe and retract
 G1 E0.30190 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.600 F12000.000 ; lift Z
 G1 X100.997 Y132.615 F12000.000 ; move to first infill point
 G1 Z4.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.630 Y132.615 E5.14901 F1800.000 ; infill
 G1 F9600
 G1 X100.997 Y132.615 E4.58685 ; wipe and retract
 G1 E0.14901 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.600 F12000.000 ; lift Z
 G1 X99.855 Y81.922 F12000.000 ; move to first infill point
 G1 Z4.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.594 Y74.053 E5.50170 F1800.000 ; infill
 G1 X97.962 Y70.107 E5.62034 F1800.000 ; infill
 G1 X94.601 Y68.841 F12000.000 ; move to first infill point
 G1 X92.452 Y68.841 E5.72279 F7200.000 ; infill
 G1 X92.452 Y68.267 E5.75011 ; infill
 G1 X94.601 Y68.267 E5.85257 ; infill
 G1 X94.601 Y67.694 E5.87989 ; infill
 G1 X92.452 Y67.694 E5.98234 ; infill
 G1 X92.452 Y67.121 E6.00967 ; infill
 G1 X94.601 Y67.121 E6.11212 ; infill
 G1 X94.601 Y66.548 E6.13944 ; infill
 G1 X92.452 Y66.548 E6.24190 ; infill
 G1 X92.452 Y65.974 E6.26922 ; infill
 G1 X94.601 Y65.974 E6.37167 ; infill
 G1 X94.601 Y65.401 E6.39900 ; infill
 G1 X92.454 Y65.401 E6.50135 ; infill
 G1 X92.458 Y64.828 E6.52868 ; infill
 G1 X94.601 Y64.828 E6.63086 ; infill
 G1 X94.601 Y64.255 E6.65818 ; infill
 G1 X92.461 Y64.255 E6.76019 ; infill
 G1 X92.465 Y63.681 E6.78751 ; infill
 G1 X94.601 Y63.681 E6.88934 ; infill
 G1 X94.601 Y63.108 E6.91667 ; infill
 G1 X92.469 Y63.108 E7.01832 ; infill
 G1 X92.472 Y62.535 E7.04564 ; infill
 G1 X94.601 Y62.535 E7.14712 ; infill
 G1 X94.601 Y61.962 E7.17445 ; infill
 G1 X92.476 Y61.962 E7.27575 ; infill
 G1 X92.480 Y61.388 E7.30308 ; infill
 G1 X94.601 Y61.388 E7.40421 ; infill
 G1 F9600
 G1 X92.480 Y61.388 E6.90032 ; wipe and retract
 G1 F9600
 G1 X92.476 Y61.962 E6.76417 ; wipe and retract
 G1 F9600
 G1 X94.601 Y61.962 E6.25941 ; wipe and retract
 G1 F9600
 G1 X94.601 Y62.535 E6.12326 ; wipe and retract
 G1 F9600
 G1 X92.472 Y62.535 E5.61763 ; wipe and retract
 G1 F9600
 G1 X92.469 Y63.108 E5.48148 ; wipe and retract
 G1 F9600
 G1 X94.601 Y63.108 E4.97498 ; wipe and retract
 G1 F9600
 G1 X94.601 Y63.681 E4.83883 ; wipe and retract
 G1 F9600
 G1 X92.465 Y63.681 E4.33145 ; wipe and retract
 G1 F9600
 G1 X92.461 Y64.255 E4.19530 ; wipe and retract
 G1 F9600
 G1 X94.601 Y64.255 E3.68705 ; wipe and retract
 G1 F9600
 G1 X94.601 Y64.828 E3.55090 ; wipe and retract
 G1 F9600
 G1 X92.458 Y64.828 E3.04178 ; wipe and retract
 G1 F9600
 G1 X92.454 Y65.401 E2.90563 ; wipe and retract
 G1 F9600
 G1 X93.513 Y65.401 E2.65421 ; wipe and retract
 G1 E2.40421 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.600 F12000.000 ; lift Z
 G1 Z4.600 F12000.000 ; move to next layer (39)
 G1 Z5.600 F12000.000 ; lift Z
 G1 X98.445 Y83.930 F12000.000 ; move to first support material interface point
 G1 Z4.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X99.012 Y83.879 E5.04864 F1680.000 ; support material interface
 G1 F9600
 G1 X98.445 Y83.930 E4.91354 ; wipe and retract
 G1 E0.04864 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.600 F12000.000 ; lift Z
 G1 X101.269 Y84.335 F12000.000 ; move to first support material interface point
 G1 Z4.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.525 Y84.579 E5.23561 F1680.000 ; support material interface
 G1 X98.624 Y85.226 E5.29161 ; support material interface
 G1 X101.269 Y84.992 E5.51870 ; support material interface
 G1 X101.269 Y85.648 E5.57481 ; support material interface
 G1 X100.683 Y85.700 E5.62517 ; support material interface
 G1 F9600
 G1 X101.269 Y85.648 E5.48529 ; wipe and retract
 G1 F9600
 G1 X101.269 Y84.992 E5.32943 ; wipe and retract
 G1 F9600
 G1 X98.624 Y85.226 E4.69868 ; wipe and retract
 G1 F9600
 G1 X98.525 Y84.579 E4.54312 ; wipe and retract
 G1 F9600
 G1 X101.269 Y84.335 E3.88870 ; wipe and retract
 G1 E0.62517 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.600 F12000.000 ; lift Z
 G1 X99.815 Y89.231 F12000.000 ; move to first support material interface point
 G1 Z4.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X99.282 Y89.278 E5.04573 F1680.000 ; support material interface
 G1 X99.349 Y89.845 E5.09456 ; support material interface
 G1 X102.853 Y89.535 E5.39531 ; support material interface
 G1 X102.927 Y90.101 E5.44417 ; support material interface
 G1 X102.394 Y90.148 E5.48990 ; support material interface
 G1 F9600
 G1 X102.927 Y90.101 E5.36288 ; wipe and retract
 G1 F9600
 G1 X102.853 Y89.535 E5.22717 ; wipe and retract
 G1 F9600
 G1 X99.349 Y89.845 E4.39181 ; wipe and retract
 G1 F9600
 G1 X99.282 Y89.278 E4.25617 ; wipe and retract
 G1 F9600
 G1 X99.815 Y89.231 E4.12915 ; wipe and retract
 G1 E0.48990 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.600 F12000.000 ; lift Z
 G1 X104.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z4.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X102.787 Y133.015 E5.05999 F7200.000 ; perimeter
 G1 X102.787 Y132.215 E5.08375 ; perimeter
 G1 X109.346 Y132.215 E5.27849 ; perimeter
 G1 X109.992 Y136.074 E5.39467 ; perimeter
 G1 X109.992 Y137.923 E5.44956 ; perimeter
 G1 X109.148 Y139.531 E5.50348 ; perimeter
 G1 X107.653 Y140.562 E5.55740 ; perimeter
 G1 X105.814 Y140.785 E5.61242 ; perimeter
 G1 X102.787 Y140.785 E5.70227 ; perimeter
 G1 X102.787 Y136.015 E5.84392 ; perimeter
 G1 X104.808 Y136.015 E5.90392 ; perimeter
 G1 X104.808 Y133.075 E5.99121 ; perimeter
 G1 X104.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X105.165 Y136.372 F12000.000 ; move to first perimeter point
 G1 X105.165 Y132.572 E6.10404 F7200.000 ; perimeter
 G1 X109.044 Y132.572 E6.21921 ; perimeter
 G1 X109.635 Y136.104 E6.32553 ; perimeter
 G1 X109.635 Y137.835 E6.37693 ; perimeter
 G1 X108.873 Y139.287 E6.42562 ; perimeter
 G1 X107.523 Y140.218 E6.47431 ; perimeter
 G1 X105.792 Y140.428 E6.52608 ; perimeter
 G1 X103.145 Y140.428 E6.60469 ; perimeter
 G1 X103.145 Y136.372 E6.72514 ; perimeter
 G1 X105.105 Y136.372 E6.78335 ; perimeter
 G1 X105.522 Y136.729 F12000.000 ; move to first perimeter point
 G1 X105.522 Y132.929 E6.89618 F7200.000 ; perimeter
 G1 X108.742 Y132.929 E6.99177 ; perimeter
 G1 X109.278 Y136.133 E7.08824 ; perimeter
 G1 X109.278 Y137.747 E7.13614 ; perimeter
 G1 X108.597 Y139.043 E7.17960 ; perimeter
 G1 X107.393 Y139.874 E7.22307 ; perimeter
 G1 X105.771 Y140.071 E7.27158 ; perimeter
 G1 X103.502 Y140.071 E7.33895 ; perimeter
 G1 X103.502 Y136.729 E7.43819 ; perimeter
 G1 X105.462 Y136.729 E7.49640 ; perimeter
 G1 X105.879 Y137.086 F12000.000 ; move to first perimeter point
 G1 X105.879 Y133.286 E7.60923 F7200.000 ; perimeter
 G1 X108.440 Y133.286 E7.68525 ; perimeter
 G1 X108.921 Y136.163 E7.77186 ; perimeter
 G1 X108.921 Y137.659 E7.81626 ; perimeter
 G1 X108.322 Y138.799 E7.85450 ; perimeter
 G1 X107.262 Y139.530 E7.89274 ; perimeter
 G1 X105.749 Y139.714 E7.93800 ; perimeter
 G1 X103.859 Y139.714 E7.99413 ; perimeter
 G1 X103.859 Y137.086 E8.07216 ; perimeter
 G1 X105.819 Y137.086 E8.13038 ; perimeter
 G1 X106.236 Y137.443 F12000.000 ; move to first perimeter point
 G1 X106.236 Y133.643 E8.24320 F7200.000 ; perimeter
 G1 X108.137 Y133.643 E8.29964 ; perimeter
 G1 X108.564 Y136.193 E8.37639 ; perimeter
 G1 X108.564 Y137.571 E8.41731 ; perimeter
 G1 X108.047 Y138.555 E8.45032 ; perimeter
 G1 X107.132 Y139.187 E8.48333 ; perimeter
 G1 X105.728 Y139.357 E8.52533 ; perimeter
 G1 X104.216 Y139.357 E8.57022 ; perimeter
 G1 X104.216 Y137.443 E8.62705 ; perimeter
 G1 X106.176 Y137.443 E8.68526 ; perimeter
 G1 X106.593 Y137.800 F12000.000 ; move to first perimeter point
 G1 X106.593 Y134.000 E8.79809 F7200.000 ; perimeter
 G1 X107.835 Y134.000 E8.83495 ; perimeter
 G1 X108.207 Y136.222 E8.90184 ; perimeter
 G1 X108.207 Y137.482 E8.93927 ; perimeter
 G1 X107.772 Y138.311 E8.96705 ; perimeter
 G1 X107.001 Y138.843 E8.99484 ; perimeter
 G1 X105.706 Y139.000 E9.03358 ; perimeter
 G1 X104.573 Y139.000 E9.06723 ; perimeter
 G1 X104.573 Y137.800 E9.10285 ; perimeter
 G1 X106.533 Y137.800 E9.16107 ; perimeter
 G1 X107.818 Y137.597 F12000.000 ; move to first infill point
 G1 X107.818 Y135.966 E9.23854 F7200.000 ; infill
 G1 X107.247 Y134.221 F12000.000 ; move to first infill point
 G1 X107.247 Y138.393 E9.43671 F7200.000 ; infill
 G1 X106.675 Y138.678 E9.46705 ; infill
 G1 X106.675 Y138.001 E9.49920 ; infill
 G1 X106.104 Y138.001 E9.52634 ; infill
 G1 X106.104 Y138.748 E9.56179 ; infill
 G1 X105.533 Y138.779 E9.58897 ; infill
 G1 X105.533 Y138.001 E9.62589 ; infill
 G1 X104.961 Y138.001 E9.65303 ; infill
 G1 X104.961 Y138.779 E9.68996 ; infill
 G1 X104.987 Y132.615 F12000.000 ; move to first infill point
 G1 X102.966 Y132.615 E9.81716 F1800.000 ; infill
 G1 F9600
 G1 X104.987 Y132.615 E9.33727 ; wipe and retract
 G1 E4.81716 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.800 F12000.000 ; lift Z
 G1 X104.430 Y102.815 F12000.000 ; move to first perimeter point
 G1 Z4.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X101.979 Y102.815 E5.07276 F7200.000 ; perimeter
 G1 X100.201 Y91.215 E5.42120 ; perimeter
 G1 X102.490 Y91.215 E5.48916 ; perimeter
 G1 X104.420 Y102.755 E5.83658 ; perimeter
 G1 X104.073 Y102.634 F12000.000 ; move inwards before travel
 G1 X104.008 Y102.458 F12000.000 ; move to first perimeter point
 G1 X102.286 Y102.458 E5.88771 F7200.000 ; perimeter
 G1 X100.617 Y91.572 E6.21470 ; perimeter
 G1 X102.188 Y91.572 E6.26133 ; perimeter
 G1 X103.998 Y102.398 E6.58725 ; perimeter
 G1 X103.586 Y102.100 F12000.000 ; move to first perimeter point
 G1 X102.593 Y102.100 E6.61677 F7200.000 ; perimeter
 G1 X101.033 Y91.929 E6.92230 ; perimeter
 G1 X101.885 Y91.929 E6.94761 ; perimeter
 G1 X103.577 Y102.041 E7.25203 ; perimeter
 G1 X103.165 Y101.743 F12000.000 ; move to first perimeter point
 G1 X102.899 Y101.743 E7.25992 F7200.000 ; perimeter
 G1 X102.350 Y98.160 E7.36755 ; perimeter
 G1 X102.560 Y98.127 E7.37387 ; perimeter
 G1 X103.155 Y101.684 E7.48097 ; perimeter
 G1 X102.427 Y97.967 F12000.000 ; move to first infill point
 G1 X101.487 Y92.107 E7.85455 F1800.000 ; infill
 G1 F9600
 G1 X102.427 Y97.967 E6.44510 ; wipe and retract
 G1 E2.85455 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.800 F12000.000 ; lift Z
 G1 X95.608 Y123.815 F12000.000 ; move to first perimeter point
 G1 Z4.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X95.608 Y132.215 E5.24941 F7200.000 ; perimeter
 G1 X100.829 Y132.215 E5.40441 ; perimeter
 G1 X100.829 Y133.015 E5.42817 ; perimeter
 G1 X98.808 Y133.015 E5.48816 ; perimeter
 G1 X98.808 Y136.015 E5.57723 ; perimeter
 G1 X100.829 Y136.015 E5.63723 ; perimeter
 G1 X100.829 Y140.785 E5.77888 ; perimeter
 G1 X93.363 Y140.785 E6.00056 ; perimeter
 G1 X91.653 Y140.137 E6.05485 ; perimeter
 G1 X90.449 Y138.778 E6.10877 ; perimeter
 G1 X90.008 Y136.991 E6.16341 ; perimeter
 G1 X90.507 Y59.215 E8.47274 ; perimeter
 G1 X96.608 Y59.215 E8.65389 ; perimeter
 G1 X96.608 Y69.215 E8.95080 ; perimeter
 G1 X98.811 Y69.215 E9.01621 ; perimeter
 G1 X101.085 Y82.815 E9.42562 ; perimeter
 G1 X98.914 Y82.815 E9.49010 ; perimeter
 G1 X97.105 Y71.015 E9.84455 ; perimeter
 G1 X92.884 Y71.015 E9.96987 ; perimeter
 G1 X92.608 Y118.036 E11.36603 ; perimeter
 G1 X92.875 Y119.220 E11.40204 ; perimeter
 G1 X93.635 Y120.155 E11.43783 ; perimeter
 G1 X94.703 Y120.597 E11.47215 ; perimeter
 G1 X101.631 Y120.597 E11.67785 ; perimeter
 G1 X102.742 Y120.450 E11.71111 ; perimeter
 G1 X103.689 Y119.737 E11.74632 ; perimeter
 G1 X104.219 Y118.635 E11.78263 ; perimeter
 G1 X104.219 Y117.425 E11.81855 ; perimeter
 G1 X103.267 Y111.215 E12.00509 ; perimeter
 G1 X105.835 Y111.215 E12.08133 ; perimeter
 G1 X107.942 Y123.815 E12.46063 ; perimeter
 G1 X95.668 Y123.815 E12.82505 ; perimeter
 G1 X95.208 Y123.815 F12000.000 ; move inwards before travel
 G1 X95.251 Y123.458 F12000.000 ; move to first perimeter point
 G1 X95.251 Y132.572 E13.09566 F7200.000 ; perimeter
 G1 X98.451 Y132.572 E13.19068 ; perimeter
 G1 X98.451 Y136.372 E13.30350 ; perimeter
 G1 X100.472 Y136.372 E13.36350 ; perimeter
 G1 X100.472 Y140.428 E13.48394 ; perimeter
 G1 X93.428 Y140.428 E13.69308 ; perimeter
 G1 X91.862 Y139.834 E13.74281 ; perimeter
 G1 X90.774 Y138.607 E13.79150 ; perimeter
 G1 X90.366 Y136.949 E13.84221 ; perimeter
 G1 X90.862 Y59.572 E16.13968 ; perimeter
 G1 X96.251 Y59.572 E16.29970 ; perimeter
 G1 X96.251 Y69.572 E16.59661 ; perimeter
 G1 X98.509 Y69.572 E16.66365 ; perimeter
 G1 X100.664 Y82.458 E17.05156 ; perimeter
 G1 X99.220 Y82.458 E17.09442 ; perimeter
 G1 X97.411 Y70.658 E17.44886 ; perimeter
 G1 X92.529 Y70.658 E17.59382 ; perimeter
 G1 X92.251 Y118.075 E19.00173 ; perimeter
 G1 X92.545 Y119.380 E19.04145 ; perimeter
 G1 X93.415 Y120.451 E19.08240 ; perimeter
 G1 X94.632 Y120.954 E19.12152 ; perimeter
 G1 X101.655 Y120.954 E19.33002 ; perimeter
 G1 X102.881 Y120.792 E19.36676 ; perimeter
 G1 X103.973 Y119.970 E19.40734 ; perimeter
 G1 X104.576 Y118.716 E19.44864 ; perimeter
 G1 X104.576 Y117.398 E19.48778 ; perimeter
 G1 X103.683 Y111.572 E19.66279 ; perimeter
 G1 X105.532 Y111.572 E19.71769 ; perimeter
 G1 X107.520 Y123.458 E20.07550 ; perimeter
 G1 X95.311 Y123.458 E20.43800 ; perimeter
 G1 X94.894 Y123.100 F12000.000 ; move to first perimeter point
 G1 X94.894 Y132.929 E20.72982 F7200.000 ; perimeter
 G1 X98.094 Y132.929 E20.82483 ; perimeter
 G1 X98.094 Y136.729 E20.93765 ; perimeter
 G1 X100.115 Y136.729 E20.99765 ; perimeter
 G1 X100.115 Y140.071 E21.09689 ; perimeter
 G1 X93.493 Y140.071 E21.29348 ; perimeter
 G1 X92.071 Y139.532 E21.33866 ; perimeter
 G1 X91.100 Y138.436 E21.38212 ; perimeter
 G1 X90.723 Y136.906 E21.42889 ; perimeter
 G1 X91.216 Y59.929 E23.71451 ; perimeter
 G1 X95.894 Y59.929 E23.85339 ; perimeter
 G1 X95.894 Y69.929 E24.15030 ; perimeter
 G1 X98.206 Y69.929 E24.21897 ; perimeter
 G1 X100.242 Y82.100 E24.58538 ; perimeter
 G1 X99.527 Y82.100 E24.60661 ; perimeter
 G1 X97.718 Y70.300 E24.96106 ; perimeter
 G1 X92.174 Y70.300 E25.12566 ; perimeter
 G1 X91.893 Y118.114 E26.54532 ; perimeter
 G1 X92.216 Y119.540 E26.58874 ; perimeter
 G1 X93.195 Y120.746 E26.63486 ; perimeter
 G1 X94.561 Y121.311 E26.67877 ; perimeter
 G1 X101.678 Y121.311 E26.89008 ; perimeter
 G1 X103.021 Y121.133 E26.93030 ; perimeter
 G1 X104.257 Y120.203 E26.97624 ; perimeter
 G1 X104.933 Y118.797 E27.02254 ; perimeter
 G1 X104.933 Y117.371 E27.06491 ; perimeter
 G1 X104.099 Y111.929 E27.22837 ; perimeter
 G1 X105.230 Y111.929 E27.26194 ; perimeter
 G1 X107.098 Y123.100 E27.59825 ; perimeter
 G1 X94.954 Y123.100 E27.95883 ; perimeter
 G1 X94.537 Y122.743 F12000.000 ; move to first perimeter point
 G1 X94.537 Y133.286 E28.27185 F7200.000 ; perimeter
 G1 X97.737 Y133.286 E28.36687 ; perimeter
 G1 X97.737 Y137.086 E28.47969 ; perimeter
 G1 X99.757 Y137.086 E28.53969 ; perimeter
 G1 X99.757 Y139.714 E28.61772 ; perimeter
 G1 X93.559 Y139.714 E28.80177 ; perimeter
 G1 X92.280 Y139.229 E28.84239 ; perimeter
 G1 X91.426 Y138.265 E28.88063 ; perimeter
 G1 X91.080 Y136.864 E28.92347 ; perimeter
 G1 X91.571 Y60.286 E31.19722 ; perimeter
 G1 X95.537 Y60.286 E31.31497 ; perimeter
 G1 X95.537 Y69.943 E31.60171 ; perimeter
 G1 X91.819 Y69.943 E31.71209 ; perimeter
 G1 X91.536 Y118.153 E33.14352 ; perimeter
 G1 X91.886 Y119.700 E33.19062 ; perimeter
 G1 X92.975 Y121.041 E33.24191 ; perimeter
 G1 X94.490 Y121.668 E33.29062 ; perimeter
 G1 X101.702 Y121.668 E33.50473 ; perimeter
 G1 X103.161 Y121.475 E33.54844 ; perimeter
 G1 X104.541 Y120.436 E33.59974 ; perimeter
 G1 X105.290 Y118.879 E33.65104 ; perimeter
 G1 X105.290 Y117.343 E33.69663 ; perimeter
 G1 X104.515 Y112.286 E33.84855 ; perimeter
 G1 X104.928 Y112.286 E33.86080 ; perimeter
 G1 X106.677 Y122.743 E34.17561 ; perimeter
 G1 X94.597 Y122.743 E34.53427 ; perimeter
 G1 F9600
 G1 X94.537 Y133.286 E32.03039 ; wipe and retract
 G1 F9600
 G1 X97.737 Y133.286 E31.27039 ; wipe and retract
 G1 F9600
 G1 X97.737 Y137.086 E30.36789 ; wipe and retract
 G1 F9600
 G1 X99.757 Y137.086 E29.88800 ; wipe and retract
 G1 F9600
 G1 X99.757 Y137.523 E29.78427 ; wipe and retract
 G1 E29.53427 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.800 F12000.000 ; lift Z
 G1 X95.180 Y69.586 F12000.000 ; move to first perimeter point
 G1 Z4.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.869 Y69.586 E5.09831 F7200.000 ; perimeter
 G1 X91.926 Y60.643 E5.36386 ; perimeter
 G1 X95.180 Y60.643 E5.46047 ; perimeter
 G1 X95.180 Y69.526 E5.72422 ; perimeter
 G1 X94.823 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.228 Y69.229 E5.80126 F7200.000 ; perimeter
 G1 X92.281 Y61.000 E6.04560 ; perimeter
 G1 X94.823 Y61.000 E6.12108 ; perimeter
 G1 X94.823 Y69.169 E6.36363 ; perimeter
 G1 F9600
 G1 X92.228 Y69.229 E5.74724 ; wipe and retract
 G1 F9600
 G1 X92.281 Y61.000 E3.79276 ; wipe and retract
 G1 F9600
 G1 X94.823 Y61.000 E3.18906 ; wipe and retract
 G1 F9600
 G1 X94.823 Y67.633 E1.61363 ; wipe and retract
 G1 E1.36363 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.800 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z4.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X99.400 Y137.443 E5.60206 ; perimeter
 G1 X99.400 Y139.357 E5.65889 ; perimeter
 G1 X93.624 Y139.357 E5.83039 ; perimeter
 G1 X92.488 Y138.926 E5.86646 ; perimeter
 G1 X91.751 Y138.094 E5.89947 ; perimeter
 G1 X91.438 Y136.822 E5.93837 ; perimeter
 G1 X91.546 Y119.849 E6.44233 ; perimeter
 G1 X92.754 Y121.337 E6.49923 ; perimeter
 G1 X94.419 Y122.025 E6.55273 ; perimeter
 G1 X101.725 Y122.025 E6.76965 ; perimeter
 G1 X103.301 Y121.817 E6.81684 ; perimeter
 G1 X104.825 Y120.669 E6.87350 ; perimeter
 G1 X105.561 Y119.141 E6.92384 ; perimeter
 G1 X105.716 Y119.163 E6.92849 ; perimeter
 G1 X106.255 Y122.386 E7.02552 ; perimeter
 G1 X94.240 Y122.386 E7.38226 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E7.38684 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E7.43526 ; perimeter
 G1 X105.394 Y120.311 E7.45474 ; perimeter
 G1 X105.549 Y120.333 E7.45940 ; perimeter
 G1 X105.833 Y122.029 E7.51047 ; perimeter
 G1 X103.916 Y122.029 E7.56740 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E7.52408 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.13672 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E6.98090 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E6.94366 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E6.53516 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.07976 ; wipe and retract
 G1 E2.56740 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.800 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z4.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X99.043 Y137.800 E5.26783 ; perimeter
 G1 X99.043 Y139.000 E5.30346 ; perimeter
 G1 X93.690 Y139.000 E5.46242 ; perimeter
 G1 X92.697 Y138.624 E5.49393 ; perimeter
 G1 X92.077 Y137.923 E5.52171 ; perimeter
 G1 X91.795 Y136.780 E5.55668 ; perimeter
 G1 X91.897 Y120.847 E6.02974 ; perimeter
 G1 X92.534 Y121.632 E6.05976 ; perimeter
 G1 X93.823 Y122.165 E6.10115 ; perimeter
 G1 X93.823 Y133.940 E6.45077 ; perimeter
 G1 X93.949 Y134.201 F12000.000 ; move to first infill point
 G1 X93.949 Y138.779 E6.67466 F7200.000 ; infill
 G1 X94.537 Y138.779 E6.70344 ; infill
 G1 X94.537 Y134.201 E6.92733 ; infill
 G1 X95.125 Y134.201 E6.95611 ; infill
 G1 X95.125 Y138.779 E7.18000 ; infill
 G1 X95.713 Y138.779 E7.20878 ; infill
 G1 X95.713 Y134.201 E7.43267 ; infill
 G1 X96.302 Y134.201 E7.46145 ; infill
 G1 X96.302 Y138.779 E7.68534 ; infill
 G1 X96.890 Y138.779 E7.71411 ; infill
 G1 X96.890 Y138.001 E7.75213 ; infill
 G1 X97.478 Y138.001 E7.78091 ; infill
 G1 X97.478 Y138.779 E7.81893 ; infill
 G1 X98.067 Y138.779 E7.84770 ; infill
 G1 X98.067 Y138.001 E7.88572 ; infill
 G1 X98.655 Y138.001 E7.91450 ; infill
 G1 X98.655 Y138.779 E7.95251 ; infill
 G1 X93.360 Y138.648 F12000.000 ; move to first infill point
 G1 X93.360 Y122.205 E8.75680 F7200.000 ; infill
 G1 X92.772 Y121.962 E8.78794 ; infill
 G1 X92.772 Y138.319 E9.58806 ; infill
 G1 X92.184 Y136.985 F12000.000 ; move to first infill point
 G1 X92.184 Y133.448 E9.76105 F7200.000 ; infill
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X100.650 Y132.615 E9.88825 F1800.000 ; infill
 G1 F9600
 G1 X98.630 Y132.615 E9.40836 ; wipe and retract
 G1 E4.88825 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.800 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z4.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X104.774 Y121.808 F12000.000 ; move to first infill point
 G1 X104.774 Y121.449 E5.07163 F7200.000 ; infill
 G1 X105.374 Y121.352 E5.10194 ; infill
 G1 X105.374 Y121.808 E5.12466 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.931 E5.19069 F1800.000 ; infill
 G1 X105.579 Y117.931 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.20886 F1800.000 ; infill
 G1 X104.750 Y112.464 E5.35489 ; infill
 G1 F9600
 G1 X105.528 Y117.321 E4.18681 ; wipe and retract
 G1 F9600
 G1 X105.579 Y117.931 E4.04146 ; wipe and retract
 G1 E0.35489 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.800 F12000.000 ; lift Z
 G1 X91.388 Y118.357 F12000.000 ; move to first infill point
 G1 Z4.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.491 Y119.308 E5.02840 F1800.000 ; infill
 G1 X91.703 Y119.744 E5.04280 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E4.92765 ; wipe and retract
 G1 F9600
 G1 X91.388 Y118.357 E4.70044 ; wipe and retract
 G1 E0.04280 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.800 F12000.000 ; lift Z
 G1 X99.855 Y81.922 F12000.000 ; move to first infill point
 G1 Z4.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.594 Y74.053 E5.50170 F1800.000 ; infill
 G1 X97.962 Y70.107 E5.62034 F1800.000 ; infill
 G1 X94.434 Y69.008 F12000.000 ; move to first infill point
 G1 X94.434 Y61.221 E6.01207 F7200.000 ; infill
 G1 X93.829 Y61.221 E6.04251 ; infill
 G1 X93.829 Y69.008 E6.43425 ; infill
 G1 X93.224 Y69.008 E6.46469 ; infill
 G1 X93.224 Y61.221 E6.85643 ; infill
 G1 X92.619 Y65.552 F12000.000 ; move to first infill point
 G1 X92.619 Y69.008 E7.03028 F7200.000 ; infill
 G1 F9600
 G1 X92.619 Y65.552 E6.20959 ; wipe and retract
 G1 E2.03028 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.800 F12000.000 ; lift Z
 G1 X99.012 Y83.879 F12000.000 ; move to first support material interface point
 G1 Z4.900 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.445 Y83.930 E5.03800 F1680.000 ; support material interface
 G1 X98.512 Y84.498 E5.07620 ; support material interface
 G1 X101.569 Y84.226 E5.28124 ; support material interface
 G1 X101.569 Y84.800 E5.31957 ; support material interface
 G1 X98.599 Y85.064 E5.51879 ; support material interface
 G1 X98.686 Y85.630 E5.55705 ; support material interface
 G1 X101.569 Y85.374 E5.75044 ; support material interface
 G1 X101.569 Y85.948 E5.78878 ; support material interface
 G1 X100.983 Y86.000 E5.82812 ; support material interface
 G1 F9600
 G1 X101.569 Y85.948 E5.68825 ; wipe and retract
 G1 F9600
 G1 X101.569 Y85.374 E5.55196 ; wipe and retract
 G1 F9600
 G1 X98.686 Y85.630 E4.86442 ; wipe and retract
 G1 F9600
 G1 X98.599 Y85.064 E4.72840 ; wipe and retract
 G1 F9600
 G1 X101.569 Y84.800 E4.02017 ; wipe and retract
 G1 F9600
 G1 X101.569 Y84.226 E3.88389 ; wipe and retract
 G1 F9600
 G1 X98.512 Y84.498 E3.15496 ; wipe and retract
 G1 F9600
 G1 X98.445 Y83.930 E3.01916 ; wipe and retract
 G1 F9600
 G1 X99.012 Y83.879 E2.88406 ; wipe and retract
 G1 E0.82812 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.900 F12000.000 ; lift Z
 G1 X99.822 Y89.230 F12000.000 ; move to first support material interface point
 G1 Z4.900 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X99.276 Y89.279 E5.03659 F1680.000 ; support material interface
 G1 X99.343 Y89.846 E5.07474 ; support material interface
 G1 X102.859 Y89.534 E5.31058 ; support material interface
 G1 X102.934 Y90.101 E5.34875 ; support material interface
 G1 X102.388 Y90.149 E5.38534 ; support material interface
 M106 S242.25 ; enable fan
 G1 F9600
 G1 X102.934 Y90.101 E5.25526 ; wipe and retract
 G1 F9600
 G1 X102.859 Y89.534 E5.11955 ; wipe and retract
 G1 F9600
 G1 X99.343 Y89.846 E4.28114 ; wipe and retract
 G1 F9600
 G1 X99.276 Y89.279 E4.14549 ; wipe and retract
 G1 F9600
 G1 X99.822 Y89.230 E4.01542 ; wipe and retract
 G1 E0.38534 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z5.900 F12000.000 ; lift Z
 G1 X104.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z5.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.134 Y133.015 E5.04971 F7200.000 ; perimeter
 G1 X103.134 Y132.215 E5.07346 ; perimeter
 G1 X109.346 Y132.215 E5.25792 ; perimeter
 G1 X109.992 Y136.074 E5.37410 ; perimeter
 G1 X109.992 Y137.923 E5.42899 ; perimeter
 G1 X109.148 Y139.531 E5.48291 ; perimeter
 G1 X107.653 Y140.562 E5.53683 ; perimeter
 G1 X105.814 Y140.785 E5.59185 ; perimeter
 G1 X103.134 Y140.785 E5.67142 ; perimeter
 G1 X103.134 Y136.015 E5.81307 ; perimeter
 G1 X104.808 Y136.015 E5.86278 ; perimeter
 G1 X104.808 Y133.075 E5.95007 ; perimeter
 G1 X104.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X105.165 Y136.372 F12000.000 ; move to first perimeter point
 G1 X105.165 Y132.572 E6.06290 F7200.000 ; perimeter
 G1 X109.044 Y132.572 E6.17807 ; perimeter
 G1 X109.635 Y136.104 E6.28439 ; perimeter
 G1 X109.635 Y137.835 E6.33579 ; perimeter
 G1 X108.873 Y139.287 E6.38448 ; perimeter
 G1 X107.523 Y140.218 E6.43317 ; perimeter
 G1 X105.792 Y140.428 E6.48494 ; perimeter
 G1 X103.491 Y140.428 E6.55327 ; perimeter
 G1 X103.491 Y136.372 E6.67371 ; perimeter
 G1 X105.105 Y136.372 E6.72164 ; perimeter
 G1 X105.522 Y136.729 F12000.000 ; move to first perimeter point
 G1 X105.522 Y132.929 E6.83447 F7200.000 ; perimeter
 G1 X108.742 Y132.929 E6.93006 ; perimeter
 G1 X109.278 Y136.133 E7.02653 ; perimeter
 G1 X109.278 Y137.747 E7.07443 ; perimeter
 G1 X108.597 Y139.043 E7.11789 ; perimeter
 G1 X107.393 Y139.874 E7.16136 ; perimeter
 G1 X105.771 Y140.071 E7.20987 ; perimeter
 G1 X103.848 Y140.071 E7.26695 ; perimeter
 G1 X103.848 Y136.729 E7.36620 ; perimeter
 G1 X105.462 Y136.729 E7.41412 ; perimeter
 G1 X105.879 Y137.086 F12000.000 ; move to first perimeter point
 G1 X105.879 Y133.286 E7.52695 F7200.000 ; perimeter
 G1 X108.440 Y133.286 E7.60297 ; perimeter
 G1 X108.921 Y136.163 E7.68958 ; perimeter
 G1 X108.921 Y137.659 E7.73398 ; perimeter
 G1 X108.322 Y138.799 E7.77222 ; perimeter
 G1 X107.262 Y139.530 E7.81046 ; perimeter
 G1 X105.749 Y139.714 E7.85572 ; perimeter
 G1 X104.205 Y139.714 E7.90156 ; perimeter
 G1 X104.205 Y137.086 E7.97960 ; perimeter
 G1 X105.819 Y137.086 E8.02753 ; perimeter
 G1 X106.236 Y137.443 F12000.000 ; move to first perimeter point
 G1 X106.236 Y133.643 E8.14035 F7200.000 ; perimeter
 G1 X108.137 Y133.643 E8.19679 ; perimeter
 G1 X108.564 Y136.193 E8.27354 ; perimeter
 G1 X108.564 Y137.571 E8.31446 ; perimeter
 G1 X108.047 Y138.555 E8.34747 ; perimeter
 G1 X107.132 Y139.187 E8.38048 ; perimeter
 G1 X105.728 Y139.357 E8.42248 ; perimeter
 G1 X104.562 Y139.357 E8.45708 ; perimeter
 G1 X104.562 Y137.443 E8.51392 ; perimeter
 G1 X106.176 Y137.443 E8.56184 ; perimeter
 G1 X106.593 Y137.800 F12000.000 ; move to first perimeter point
 G1 X106.593 Y134.000 E8.67467 F7200.000 ; perimeter
 G1 X107.835 Y134.000 E8.71153 ; perimeter
 G1 X108.207 Y136.222 E8.77842 ; perimeter
 G1 X108.207 Y137.482 E8.81584 ; perimeter
 G1 X107.772 Y138.311 E8.84363 ; perimeter
 G1 X107.001 Y138.843 E8.87142 ; perimeter
 G1 X105.706 Y139.000 E8.91016 ; perimeter
 G1 X104.919 Y139.000 E8.93352 ; perimeter
 G1 X104.919 Y137.800 E8.96915 ; perimeter
 G1 X106.533 Y137.800 E9.01708 ; perimeter
 G1 X105.141 Y138.611 F12000.000 ; move to first infill point
 G1 X106.015 Y138.611 E9.06096 F7200.000 ; infill
 G1 X106.795 Y138.008 E9.11040 ; infill
 G1 X107.681 Y138.008 E9.15488 ; infill
 G1 X107.985 Y137.405 E9.18876 ; infill
 G1 X106.795 Y137.405 E9.24846 ; infill
 G1 X106.795 Y136.802 E9.27873 ; infill
 G1 X107.985 Y136.802 E9.33843 ; infill
 G1 X107.985 Y136.198 E9.36870 ; infill
 G1 X106.795 Y136.198 E9.42840 ; infill
 G1 X106.795 Y135.595 E9.45867 ; infill
 G1 X107.895 Y135.595 E9.51386 ; infill
 G1 X107.794 Y134.992 E9.54454 ; infill
 G1 X106.795 Y134.992 E9.59467 ; infill
 G1 X106.795 Y134.388 E9.62493 ; infill
 G1 X107.693 Y134.388 E9.67000 ; infill
 G1 X104.987 Y132.615 F12000.000 ; move to first infill point
 G1 X103.312 Y132.615 E9.77540 F1800.000 ; infill
 G1 F9600
 G1 X104.987 Y132.615 E9.37778 ; wipe and retract
 G1 E4.77540 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.000 F12000.000 ; lift Z
 G1 X104.430 Y102.815 F12000.000 ; move to first perimeter point
 G1 Z5.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X101.979 Y102.815 E5.07276 F7200.000 ; perimeter
 G1 X100.201 Y91.215 E5.42120 ; perimeter
 G1 X102.490 Y91.215 E5.48916 ; perimeter
 G1 X104.420 Y102.755 E5.83658 ; perimeter
 G1 X104.073 Y102.634 F12000.000 ; move inwards before travel
 G1 X104.008 Y102.458 F12000.000 ; move to first perimeter point
 G1 X102.286 Y102.458 E5.88771 F7200.000 ; perimeter
 G1 X100.617 Y91.572 E6.21470 ; perimeter
 G1 X102.188 Y91.572 E6.26133 ; perimeter
 G1 X103.998 Y102.398 E6.58725 ; perimeter
 G1 X103.586 Y102.100 F12000.000 ; move to first perimeter point
 G1 X102.593 Y102.100 E6.61677 F7200.000 ; perimeter
 G1 X101.033 Y91.929 E6.92230 ; perimeter
 G1 X101.885 Y91.929 E6.94761 ; perimeter
 G1 X103.577 Y102.041 E7.25203 ; perimeter
 G1 X103.165 Y101.743 F12000.000 ; move to first perimeter point
 G1 X102.899 Y101.743 E7.25992 F7200.000 ; perimeter
 G1 X102.350 Y98.160 E7.36755 ; perimeter
 G1 X102.560 Y98.127 E7.37387 ; perimeter
 G1 X103.155 Y101.684 E7.48097 ; perimeter
 G1 X102.427 Y97.967 F12000.000 ; move to first infill point
 G1 X101.487 Y92.107 E7.85455 F1800.000 ; infill
 G1 F9600
 G1 X102.427 Y97.967 E6.44510 ; wipe and retract
 G1 E2.85455 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.000 F12000.000 ; lift Z
 G1 X95.608 Y123.815 F12000.000 ; move to first perimeter point
 G1 Z5.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X95.608 Y132.215 E5.24941 F7200.000 ; perimeter
 G1 X100.482 Y132.215 E5.39413 ; perimeter
 G1 X100.482 Y133.015 E5.41788 ; perimeter
 G1 X98.808 Y133.015 E5.46759 ; perimeter
 G1 X98.808 Y136.015 E5.55666 ; perimeter
 G1 X100.482 Y136.015 E5.60637 ; perimeter
 G1 X100.482 Y140.785 E5.74802 ; perimeter
 G1 X93.363 Y140.785 E5.95942 ; perimeter
 G1 X91.653 Y140.137 E6.01371 ; perimeter
 G1 X90.449 Y138.778 E6.06763 ; perimeter
 G1 X90.008 Y136.991 E6.12227 ; perimeter
 G1 X90.507 Y59.215 E8.43160 ; perimeter
 G1 X96.608 Y59.215 E8.61275 ; perimeter
 G1 X96.608 Y69.215 E8.90966 ; perimeter
 G1 X98.811 Y69.215 E8.97507 ; perimeter
 G1 X101.085 Y82.815 E9.38448 ; perimeter
 G1 X98.914 Y82.815 E9.44896 ; perimeter
 G1 X97.105 Y71.015 E9.80341 ; perimeter
 G1 X92.884 Y71.015 E9.92873 ; perimeter
 G1 X92.608 Y118.036 E11.32489 ; perimeter
 G1 X92.875 Y119.220 E11.36090 ; perimeter
 G1 X93.635 Y120.155 E11.39669 ; perimeter
 G1 X94.703 Y120.597 E11.43101 ; perimeter
 G1 X101.631 Y120.597 E11.63671 ; perimeter
 G1 X102.742 Y120.450 E11.66997 ; perimeter
 G1 X103.689 Y119.737 E11.70518 ; perimeter
 G1 X104.219 Y118.635 E11.74149 ; perimeter
 G1 X104.219 Y117.425 E11.77741 ; perimeter
 G1 X103.267 Y111.215 E11.96395 ; perimeter
 G1 X105.835 Y111.215 E12.04018 ; perimeter
 G1 X107.942 Y123.815 E12.41949 ; perimeter
 G1 X95.668 Y123.815 E12.78391 ; perimeter
 G1 X95.208 Y123.815 F12000.000 ; move inwards before travel
 G1 X95.251 Y123.458 F12000.000 ; move to first perimeter point
 G1 X95.251 Y132.572 E13.05452 F7200.000 ; perimeter
 G1 X98.451 Y132.572 E13.14953 ; perimeter
 G1 X98.451 Y136.372 E13.26236 ; perimeter
 G1 X100.125 Y136.372 E13.31207 ; perimeter
 G1 X100.125 Y140.428 E13.43252 ; perimeter
 G1 X93.428 Y140.428 E13.63137 ; perimeter
 G1 X91.862 Y139.834 E13.68110 ; perimeter
 G1 X90.774 Y138.607 E13.72979 ; perimeter
 G1 X90.366 Y136.949 E13.78050 ; perimeter
 G1 X90.862 Y59.572 E16.07797 ; perimeter
 G1 X96.251 Y59.572 E16.23799 ; perimeter
 G1 X96.251 Y69.572 E16.53490 ; perimeter
 G1 X98.509 Y69.572 E16.60194 ; perimeter
 G1 X100.664 Y82.458 E16.98985 ; perimeter
 G1 X99.220 Y82.458 E17.03270 ; perimeter
 G1 X97.411 Y70.658 E17.38715 ; perimeter
 G1 X92.529 Y70.658 E17.53211 ; perimeter
 G1 X92.251 Y118.075 E18.94002 ; perimeter
 G1 X92.545 Y119.380 E18.97974 ; perimeter
 G1 X93.415 Y120.451 E19.02069 ; perimeter
 G1 X94.632 Y120.954 E19.05980 ; perimeter
 G1 X101.655 Y120.954 E19.26831 ; perimeter
 G1 X102.881 Y120.792 E19.30505 ; perimeter
 G1 X103.973 Y119.970 E19.34563 ; perimeter
 G1 X104.576 Y118.716 E19.38693 ; perimeter
 G1 X104.576 Y117.398 E19.42607 ; perimeter
 G1 X103.683 Y111.572 E19.60108 ; perimeter
 G1 X105.532 Y111.572 E19.65598 ; perimeter
 G1 X107.520 Y123.458 E20.01379 ; perimeter
 G1 X95.311 Y123.458 E20.37629 ; perimeter
 G1 X94.894 Y123.100 F12000.000 ; move to first perimeter point
 G1 X94.894 Y132.929 E20.66811 F7200.000 ; perimeter
 G1 X98.094 Y132.929 E20.76312 ; perimeter
 G1 X98.094 Y136.729 E20.87594 ; perimeter
 G1 X99.768 Y136.729 E20.92565 ; perimeter
 G1 X99.768 Y140.071 E21.02490 ; perimeter
 G1 X93.493 Y140.071 E21.21120 ; perimeter
 G1 X92.071 Y139.532 E21.25638 ; perimeter
 G1 X91.100 Y138.436 E21.29984 ; perimeter
 G1 X90.723 Y136.906 E21.34661 ; perimeter
 G1 X91.216 Y59.929 E23.63223 ; perimeter
 G1 X95.894 Y59.929 E23.77111 ; perimeter
 G1 X95.894 Y69.929 E24.06802 ; perimeter
 G1 X98.206 Y69.929 E24.13668 ; perimeter
 G1 X100.242 Y82.100 E24.50310 ; perimeter
 G1 X99.527 Y82.100 E24.52433 ; perimeter
 G1 X97.718 Y70.300 E24.87878 ; perimeter
 G1 X92.174 Y70.300 E25.04338 ; perimeter
 G1 X91.893 Y118.114 E26.46304 ; perimeter
 G1 X92.216 Y119.540 E26.50646 ; perimeter
 G1 X93.195 Y120.746 E26.55258 ; perimeter
 G1 X94.561 Y121.311 E26.59649 ; perimeter
 G1 X101.678 Y121.311 E26.80780 ; perimeter
 G1 X103.021 Y121.133 E26.84802 ; perimeter
 G1 X104.257 Y120.203 E26.89396 ; perimeter
 G1 X104.933 Y118.797 E26.94026 ; perimeter
 G1 X104.933 Y117.371 E26.98263 ; perimeter
 G1 X104.099 Y111.929 E27.14609 ; perimeter
 G1 X105.230 Y111.929 E27.17966 ; perimeter
 G1 X107.098 Y123.100 E27.51597 ; perimeter
 G1 X94.954 Y123.100 E27.87655 ; perimeter
 G1 X94.537 Y122.743 F12000.000 ; move to first perimeter point
 G1 X94.537 Y133.286 E28.18957 F7200.000 ; perimeter
 G1 X97.737 Y133.286 E28.28459 ; perimeter
 G1 X97.737 Y137.086 E28.39741 ; perimeter
 G1 X99.411 Y137.086 E28.44712 ; perimeter
 G1 X99.411 Y139.714 E28.52516 ; perimeter
 G1 X93.559 Y139.714 E28.69892 ; perimeter
 G1 X92.280 Y139.229 E28.73954 ; perimeter
 G1 X91.426 Y138.265 E28.77778 ; perimeter
 G1 X91.080 Y136.864 E28.82061 ; perimeter
 G1 X91.571 Y60.286 E31.09437 ; perimeter
 G1 X95.537 Y60.286 E31.21212 ; perimeter
 G1 X95.537 Y69.943 E31.49886 ; perimeter
 G1 X91.819 Y69.943 E31.60924 ; perimeter
 G1 X91.536 Y118.153 E33.04067 ; perimeter
 G1 X91.886 Y119.700 E33.08777 ; perimeter
 G1 X92.975 Y121.041 E33.13906 ; perimeter
 G1 X94.490 Y121.668 E33.18777 ; perimeter
 G1 X101.702 Y121.668 E33.40188 ; perimeter
 G1 X103.161 Y121.475 E33.44559 ; perimeter
 G1 X104.541 Y120.436 E33.49689 ; perimeter
 G1 X105.290 Y118.879 E33.54819 ; perimeter
 G1 X105.290 Y117.343 E33.59378 ; perimeter
 G1 X104.515 Y112.286 E33.74570 ; perimeter
 G1 X104.928 Y112.286 E33.75795 ; perimeter
 G1 X106.677 Y122.743 E34.07276 ; perimeter
 G1 X94.597 Y122.743 E34.43142 ; perimeter
 G1 F9600
 G1 X94.537 Y133.286 E31.92754 ; wipe and retract
 G1 F9600
 G1 X97.737 Y133.286 E31.16754 ; wipe and retract
 G1 F9600
 G1 X97.737 Y137.086 E30.26504 ; wipe and retract
 G1 F9600
 G1 X99.411 Y137.086 E29.86742 ; wipe and retract
 G1 F9600
 G1 X99.411 Y137.869 E29.68142 ; wipe and retract
 G1 E29.43142 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.000 F12000.000 ; lift Z
 G1 X95.180 Y69.586 F12000.000 ; move to first perimeter point
 G1 Z5.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.869 Y69.586 E5.09831 F7200.000 ; perimeter
 G1 X91.926 Y60.643 E5.36386 ; perimeter
 G1 X95.180 Y60.643 E5.46047 ; perimeter
 G1 X95.180 Y69.526 E5.72422 ; perimeter
 G1 X94.823 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.228 Y69.229 E5.80126 F7200.000 ; perimeter
 G1 X92.281 Y61.000 E6.04560 ; perimeter
 G1 X94.823 Y61.000 E6.12108 ; perimeter
 G1 X94.823 Y69.169 E6.36363 ; perimeter
 G1 F9600
 G1 X92.228 Y69.229 E5.74724 ; wipe and retract
 G1 F9600
 G1 X92.281 Y61.000 E3.79276 ; wipe and retract
 G1 F9600
 G1 X94.823 Y61.000 E3.18906 ; wipe and retract
 G1 F9600
 G1 X94.823 Y67.633 E1.61363 ; wipe and retract
 G1 E1.36363 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.000 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z5.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X99.054 Y137.443 E5.59177 ; perimeter
 G1 X99.054 Y139.357 E5.64861 ; perimeter
 G1 X93.624 Y139.357 E5.80982 ; perimeter
 G1 X92.488 Y138.926 E5.84589 ; perimeter
 G1 X91.751 Y138.094 E5.87890 ; perimeter
 G1 X91.438 Y136.822 E5.91780 ; perimeter
 G1 X91.546 Y119.849 E6.42176 ; perimeter
 G1 X92.754 Y121.337 E6.47866 ; perimeter
 G1 X94.419 Y122.025 E6.53216 ; perimeter
 G1 X101.725 Y122.025 E6.74908 ; perimeter
 G1 X103.301 Y121.817 E6.79627 ; perimeter
 G1 X104.825 Y120.669 E6.85293 ; perimeter
 G1 X105.561 Y119.141 E6.90326 ; perimeter
 G1 X105.716 Y119.163 E6.90792 ; perimeter
 G1 X106.255 Y122.386 E7.00495 ; perimeter
 G1 X94.240 Y122.386 E7.36169 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E7.36627 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E7.41469 ; perimeter
 G1 X105.394 Y120.311 E7.43417 ; perimeter
 G1 X105.549 Y120.333 E7.43883 ; perimeter
 G1 X105.833 Y122.029 E7.48990 ; perimeter
 G1 X103.916 Y122.029 E7.54683 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E7.50351 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.11615 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E6.96033 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E6.92309 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E6.51459 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.05919 ; wipe and retract
 G1 E2.54683 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.000 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z5.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X98.697 Y137.800 E5.25755 ; perimeter
 G1 X98.697 Y139.000 E5.29318 ; perimeter
 G1 X93.690 Y139.000 E5.44185 ; perimeter
 G1 X92.697 Y138.624 E5.47336 ; perimeter
 G1 X92.077 Y137.923 E5.50114 ; perimeter
 G1 X91.795 Y136.780 E5.53611 ; perimeter
 G1 X91.897 Y120.847 E6.00917 ; perimeter
 G1 X92.534 Y121.632 E6.03919 ; perimeter
 G1 X93.823 Y122.165 E6.08058 ; perimeter
 G1 X93.823 Y133.940 E6.43020 ; perimeter
 G1 X93.621 Y134.011 F12000.000 ; move to first infill point
 G1 X92.017 Y134.011 E6.50693 F7200.000 ; infill
 G1 X92.018 Y133.436 E6.53443 ; infill
 G1 X93.621 Y133.436 E6.61111 ; infill
 G1 X93.621 Y132.860 E6.63861 ; infill
 G1 X92.022 Y132.860 E6.71511 ; infill
 G1 X92.025 Y132.285 E6.74261 ; infill
 G1 X93.621 Y132.285 E6.81894 ; infill
 G1 X93.621 Y131.710 E6.84644 ; infill
 G1 X92.029 Y131.710 E6.92259 ; infill
 G1 X92.033 Y131.135 E6.95009 ; infill
 G1 X93.621 Y131.135 E7.02606 ; infill
 G1 X93.621 Y130.560 E7.05356 ; infill
 G1 X92.036 Y130.560 E7.12936 ; infill
 G1 X92.040 Y129.985 E7.15686 ; infill
 G1 X93.621 Y129.985 E7.23248 ; infill
 G1 X93.621 Y129.410 E7.25998 ; infill
 G1 X92.044 Y129.410 E7.33542 ; infill
 G1 X92.047 Y128.835 E7.36292 ; infill
 G1 X93.621 Y128.835 E7.43819 ; infill
 G1 X93.621 Y128.260 E7.46569 ; infill
 G1 X92.051 Y128.260 E7.54078 ; infill
 G1 X92.055 Y127.685 E7.56829 ; infill
 G1 X93.621 Y127.685 E7.64320 ; infill
 G1 X93.621 Y127.109 E7.67070 ; infill
 G1 X92.058 Y127.109 E7.74544 ; infill
 G1 X92.062 Y126.534 E7.77294 ; infill
 G1 X93.621 Y126.534 E7.84750 ; infill
 G1 X93.621 Y125.959 E7.87500 ; infill
 G1 X92.066 Y125.959 E7.94939 ; infill
 G1 X92.069 Y125.384 E7.97689 ; infill
 G1 X93.621 Y125.384 E8.05110 ; infill
 G1 X93.621 Y124.809 E8.07860 ; infill
 G1 X92.073 Y124.809 E8.15263 ; infill
 G1 X92.077 Y124.234 E8.18014 ; infill
 G1 X93.621 Y124.234 E8.25399 ; infill
 G1 X93.621 Y123.659 E8.28149 ; infill
 G1 X92.081 Y123.659 E8.35517 ; infill
 G1 X92.084 Y123.084 E8.38268 ; infill
 G1 X93.621 Y123.084 E8.45618 ; infill
 G1 X93.621 Y122.509 E8.48368 ; infill
 G1 X92.088 Y122.509 E8.55701 ; infill
 G1 X92.092 Y121.934 E8.58451 ; infill
 G1 X92.472 Y121.934 E8.60268 ; infill
 G1 X92.017 Y134.586 F12000.000 ; move to first infill point
 G1 X96.821 Y134.586 E8.83244 F7200.000 ; infill
 G1 X96.821 Y135.161 E8.85994 ; infill
 G1 X92.017 Y135.161 E9.08970 ; infill
 G1 X92.017 Y135.736 E9.11720 ; infill
 G1 X96.821 Y135.736 E9.34695 ; infill
 G1 X96.821 Y136.311 E9.37445 ; infill
 G1 X92.017 Y136.311 E9.60421 ; infill
 G1 X92.034 Y136.886 E9.63172 ; infill
 G1 X96.821 Y136.886 E9.86067 ; infill
 G1 X96.821 Y137.461 E9.88817 ; infill
 G1 X92.175 Y137.461 E10.11034 ; infill
 G1 X92.502 Y138.036 E10.14197 ; infill
 G1 X96.821 Y138.036 E10.34850 ; infill
 G1 X98.476 Y138.612 F12000.000 ; move to first infill point
 G1 X93.538 Y138.612 E10.58464 F7200.000 ; infill
 G1 X91.703 Y119.744 F12000.000 ; move to first infill point
 G1 X91.491 Y119.308 E10.59904 F1800.000 ; infill
 G1 X91.388 Y118.357 E10.62744 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E10.40023 ; wipe and retract
 G1 F9600
 G1 X91.703 Y119.744 E10.28508 ; wipe and retract
 G1 E5.62744 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.000 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z5.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X105.107 Y121.240 F12000.000 ; move to first infill point
 G1 X105.494 Y121.240 E5.07167 F7200.000 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.931 E5.13770 F1800.000 ; infill
 G1 X105.579 Y117.931 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.15587 F1800.000 ; infill
 G1 X104.750 Y112.464 E5.30190 ; infill
 G1 F9600
 G1 X105.528 Y117.321 E4.13382 ; wipe and retract
 G1 F9600
 G1 X105.579 Y117.931 E3.98847 ; wipe and retract
 G1 E0.30190 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.000 F12000.000 ; lift Z
 G1 X100.304 Y132.615 F12000.000 ; move to first infill point
 G1 Z5.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.630 Y132.615 E5.10539 F1800.000 ; infill
 G1 F9600
 G1 X100.304 Y132.615 E4.70777 ; wipe and retract
 G1 E0.10539 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.000 F12000.000 ; lift Z
 G1 X99.855 Y81.922 F12000.000 ; move to first infill point
 G1 Z5.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.594 Y74.053 E5.50170 F1800.000 ; infill
 G1 X98.594 Y74.053 F12000.000 ; move to first infill point
 G1 X97.962 Y70.107 E5.62034 F1800.000 ; infill
 G1 X94.601 Y68.841 F12000.000 ; move to first infill point
 G1 X92.452 Y68.841 E5.72279 F7200.000 ; infill
 G1 X92.452 Y68.267 E5.75011 ; infill
 G1 X94.601 Y68.267 E5.85256 ; infill
 G1 X94.601 Y67.694 E5.87989 ; infill
 G1 X92.452 Y67.694 E5.98234 ; infill
 G1 X92.452 Y67.121 E6.00967 ; infill
 G1 X94.601 Y67.121 E6.11212 ; infill
 G1 X94.601 Y66.548 E6.13944 ; infill
 G1 X92.452 Y66.548 E6.24190 ; infill
 G1 X92.452 Y65.974 E6.26922 ; infill
 G1 X94.601 Y65.974 E6.37167 ; infill
 G1 X94.601 Y65.401 E6.39900 ; infill
 G1 X92.454 Y65.401 E6.50135 ; infill
 G1 X92.458 Y64.828 E6.52868 ; infill
 G1 X94.601 Y64.828 E6.63086 ; infill
 G1 X94.601 Y64.255 E6.65818 ; infill
 G1 X92.461 Y64.255 E6.76019 ; infill
 G1 X92.465 Y63.681 E6.78751 ; infill
 G1 X94.601 Y63.681 E6.88934 ; infill
 G1 X94.601 Y63.108 E6.91666 ; infill
 G1 X92.469 Y63.108 E7.01832 ; infill
 G1 X92.472 Y62.535 E7.04564 ; infill
 G1 X94.601 Y62.535 E7.14712 ; infill
 G1 X94.601 Y61.962 E7.17445 ; infill
 G1 X92.476 Y61.962 E7.27575 ; infill
 G1 X92.480 Y61.388 E7.30308 ; infill
 G1 X94.601 Y61.388 E7.40421 ; infill
 M106 S239.7 ; enable fan
 G1 F9600
 G1 X92.480 Y61.388 E6.90032 ; wipe and retract
 G1 F9600
 G1 X92.476 Y61.962 E6.76417 ; wipe and retract
 G1 F9600
 G1 X94.601 Y61.962 E6.25941 ; wipe and retract
 G1 F9600
 G1 X94.601 Y62.535 E6.12326 ; wipe and retract
 G1 F9600
 G1 X92.472 Y62.535 E5.61763 ; wipe and retract
 G1 F9600
 G1 X92.469 Y63.108 E5.48148 ; wipe and retract
 G1 F9600
 G1 X94.601 Y63.108 E4.97497 ; wipe and retract
 G1 F9600
 G1 X94.601 Y63.681 E4.83883 ; wipe and retract
 G1 F9600
 G1 X92.465 Y63.681 E4.33145 ; wipe and retract
 G1 F9600
 G1 X92.461 Y64.255 E4.19530 ; wipe and retract
 G1 F9600
 G1 X94.601 Y64.255 E3.68705 ; wipe and retract
 G1 F9600
 G1 X94.601 Y64.828 E3.55090 ; wipe and retract
 G1 F9600
 G1 X92.458 Y64.828 E3.04178 ; wipe and retract
 G1 F9600
 G1 X92.454 Y65.401 E2.90563 ; wipe and retract
 G1 F9600
 G1 X93.513 Y65.401 E2.65421 ; wipe and retract
 G1 E2.40421 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.000 F12000.000 ; lift Z
 G1 X104.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z5.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.480 Y133.015 E5.03942 F7200.000 ; perimeter
 G1 X103.480 Y132.215 E5.06318 ; perimeter
 G1 X109.346 Y132.215 E5.23735 ; perimeter
 G1 X109.992 Y136.074 E5.35353 ; perimeter
 G1 X109.992 Y137.923 E5.40842 ; perimeter
 G1 X109.148 Y139.531 E5.46234 ; perimeter
 G1 X107.653 Y140.562 E5.51626 ; perimeter
 G1 X105.814 Y140.785 E5.57128 ; perimeter
 G1 X103.480 Y140.785 E5.64056 ; perimeter
 G1 X103.480 Y136.015 E5.78221 ; perimeter
 G1 X104.808 Y136.015 E5.82164 ; perimeter
 G1 X104.808 Y133.075 E5.90893 ; perimeter
 G1 X104.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X105.165 Y136.372 F12000.000 ; move to first perimeter point
 G1 X105.165 Y132.572 E6.02176 F7200.000 ; perimeter
 G1 X109.044 Y132.572 E6.13693 ; perimeter
 G1 X109.635 Y136.104 E6.24325 ; perimeter
 G1 X109.635 Y137.835 E6.29465 ; perimeter
 G1 X108.873 Y139.287 E6.34334 ; perimeter
 G1 X107.523 Y140.218 E6.39203 ; perimeter
 G1 X105.792 Y140.428 E6.44380 ; perimeter
 G1 X103.837 Y140.428 E6.50184 ; perimeter
 G1 X103.837 Y136.372 E6.62229 ; perimeter
 G1 X105.105 Y136.372 E6.65993 ; perimeter
 G1 X105.522 Y136.729 F12000.000 ; move to first perimeter point
 G1 X105.522 Y132.929 E6.77276 F7200.000 ; perimeter
 G1 X108.742 Y132.929 E6.86835 ; perimeter
 G1 X109.278 Y136.133 E6.96482 ; perimeter
 G1 X109.278 Y137.747 E7.01272 ; perimeter
 G1 X108.597 Y139.043 E7.05618 ; perimeter
 G1 X107.393 Y139.874 E7.09965 ; perimeter
 G1 X105.771 Y140.071 E7.14816 ; perimeter
 G1 X104.194 Y140.071 E7.19496 ; perimeter
 G1 X104.194 Y136.729 E7.29420 ; perimeter
 G1 X105.462 Y136.729 E7.33184 ; perimeter
 G1 X105.879 Y137.086 F12000.000 ; move to first perimeter point
 G1 X105.879 Y133.286 E7.44467 F7200.000 ; perimeter
 G1 X108.440 Y133.286 E7.52069 ; perimeter
 G1 X108.921 Y136.163 E7.60729 ; perimeter
 G1 X108.921 Y137.659 E7.65170 ; perimeter
 G1 X108.322 Y138.799 E7.68994 ; perimeter
 G1 X107.262 Y139.530 E7.72818 ; perimeter
 G1 X105.749 Y139.714 E7.77344 ; perimeter
 G1 X104.552 Y139.714 E7.80899 ; perimeter
 G1 X104.552 Y137.086 E7.88703 ; perimeter
 G1 X105.819 Y137.086 E7.92467 ; perimeter
 G1 X106.236 Y137.443 F12000.000 ; move to first perimeter point
 G1 X106.236 Y133.643 E8.03750 F7200.000 ; perimeter
 G1 X108.137 Y133.643 E8.09394 ; perimeter
 G1 X108.564 Y136.193 E8.17069 ; perimeter
 G1 X108.564 Y137.571 E8.21161 ; perimeter
 G1 X108.047 Y138.555 E8.24462 ; perimeter
 G1 X107.132 Y139.187 E8.27763 ; perimeter
 G1 X105.728 Y139.357 E8.31963 ; perimeter
 G1 X104.909 Y139.357 E8.34395 ; perimeter
 G1 X104.909 Y137.443 E8.40078 ; perimeter
 G1 X106.176 Y137.443 E8.43842 ; perimeter
 G1 X106.593 Y137.800 F12000.000 ; move to first perimeter point
 G1 X106.593 Y134.000 E8.55125 F7200.000 ; perimeter
 G1 X107.835 Y134.000 E8.58811 ; perimeter
 G1 X108.207 Y136.222 E8.65500 ; perimeter
 G1 X108.207 Y137.482 E8.69242 ; perimeter
 G1 X107.772 Y138.311 E8.72021 ; perimeter
 G1 X107.001 Y138.843 E8.74800 ; perimeter
 G1 X105.706 Y139.000 E8.78674 ; perimeter
 G1 X105.266 Y139.000 E8.79981 ; perimeter
 G1 X105.266 Y137.800 E8.83544 ; perimeter
 G1 X106.533 Y137.800 E8.87309 ; perimeter
 G1 X107.818 Y137.597 F12000.000 ; move to first infill point
 G1 X107.818 Y135.966 E8.97089 F7200.000 ; infill
 G1 X107.097 Y134.221 F12000.000 ; move to first infill point
 G1 X107.097 Y138.496 E9.22727 F7200.000 ; infill
 G1 X106.375 Y138.715 E9.27247 ; infill
 G1 X106.375 Y138.001 E9.31525 ; infill
 G1 X105.654 Y138.001 E9.35850 ; infill
 G1 X105.654 Y138.779 E9.40512 ; infill
 G1 X104.987 Y132.615 F12000.000 ; move to first infill point
 G1 X103.659 Y132.615 E9.48870 F1800.000 ; infill
 G1 F9600
 G1 X104.987 Y132.615 E9.17335 ; wipe and retract
 G1 E4.48870 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.200 F12000.000 ; lift Z
 G1 X104.430 Y102.815 F12000.000 ; move to first perimeter point
 G1 Z5.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X101.979 Y102.815 E5.07276 F7200.000 ; perimeter
 G1 X100.201 Y91.215 E5.42120 ; perimeter
 G1 X102.490 Y91.215 E5.48916 ; perimeter
 G1 X104.420 Y102.755 E5.83658 ; perimeter
 G1 X104.073 Y102.634 F12000.000 ; move inwards before travel
 G1 X104.008 Y102.458 F12000.000 ; move to first perimeter point
 G1 X102.286 Y102.458 E5.88771 F7200.000 ; perimeter
 G1 X100.617 Y91.572 E6.21470 ; perimeter
 G1 X102.188 Y91.572 E6.26133 ; perimeter
 G1 X103.998 Y102.398 E6.58725 ; perimeter
 G1 X103.586 Y102.100 F12000.000 ; move to first perimeter point
 G1 X102.593 Y102.100 E6.61677 F7200.000 ; perimeter
 G1 X101.033 Y91.929 E6.92230 ; perimeter
 G1 X101.885 Y91.929 E6.94761 ; perimeter
 G1 X103.577 Y102.041 E7.25203 ; perimeter
 G1 X103.165 Y101.743 F12000.000 ; move to first perimeter point
 G1 X102.899 Y101.743 E7.25992 F7200.000 ; perimeter
 G1 X102.350 Y98.160 E7.36755 ; perimeter
 G1 X102.560 Y98.127 E7.37387 ; perimeter
 G1 X103.155 Y101.684 E7.48096 ; perimeter
 G1 X102.427 Y97.967 F12000.000 ; move to first infill point
 G1 X101.487 Y92.107 E7.85455 F1800.000 ; infill
 G1 F9600
 G1 X102.427 Y97.967 E6.44509 ; wipe and retract
 G1 E2.85455 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.200 F12000.000 ; lift Z
 G1 X95.608 Y123.815 F12000.000 ; move to first perimeter point
 G1 Z5.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X95.608 Y132.215 E5.24941 F7200.000 ; perimeter
 G1 X100.136 Y132.215 E5.38384 ; perimeter
 G1 X100.136 Y133.015 E5.40760 ; perimeter
 G1 X98.808 Y133.015 E5.44702 ; perimeter
 G1 X98.808 Y136.015 E5.53609 ; perimeter
 G1 X100.136 Y136.015 E5.57552 ; perimeter
 G1 X100.136 Y140.785 E5.71717 ; perimeter
 G1 X93.363 Y140.785 E5.91828 ; perimeter
 G1 X91.653 Y140.137 E5.97257 ; perimeter
 G1 X90.449 Y138.778 E6.02649 ; perimeter
 G1 X90.008 Y136.991 E6.08113 ; perimeter
 G1 X90.507 Y59.215 E8.39046 ; perimeter
 G1 X96.608 Y59.215 E8.57161 ; perimeter
 G1 X96.608 Y69.215 E8.86852 ; perimeter
 G1 X98.811 Y69.215 E8.93393 ; perimeter
 G1 X101.085 Y82.815 E9.34334 ; perimeter
 G1 X98.914 Y82.815 E9.40782 ; perimeter
 G1 X97.105 Y71.015 E9.76227 ; perimeter
 G1 X92.884 Y71.015 E9.88758 ; perimeter
 G1 X92.608 Y118.036 E11.28374 ; perimeter
 G1 X92.875 Y119.220 E11.31976 ; perimeter
 G1 X93.635 Y120.155 E11.35555 ; perimeter
 G1 X94.703 Y120.597 E11.38987 ; perimeter
 G1 X101.631 Y120.597 E11.59557 ; perimeter
 G1 X102.742 Y120.450 E11.62883 ; perimeter
 G1 X103.689 Y119.737 E11.66404 ; perimeter
 G1 X104.219 Y118.635 E11.70035 ; perimeter
 G1 X104.219 Y117.425 E11.73627 ; perimeter
 G1 X103.267 Y111.215 E11.92281 ; perimeter
 G1 X105.835 Y111.215 E11.99904 ; perimeter
 G1 X107.942 Y123.815 E12.37835 ; perimeter
 G1 X95.668 Y123.815 E12.74277 ; perimeter
 G1 X95.208 Y123.815 F12000.000 ; move inwards before travel
 G1 X95.251 Y123.458 F12000.000 ; move to first perimeter point
 G1 X95.251 Y132.572 E13.01338 F7200.000 ; perimeter
 G1 X98.451 Y132.572 E13.10839 ; perimeter
 G1 X98.451 Y136.372 E13.22122 ; perimeter
 G1 X99.779 Y136.372 E13.26065 ; perimeter
 G1 X99.779 Y140.428 E13.38109 ; perimeter
 G1 X93.428 Y140.428 E13.56966 ; perimeter
 G1 X91.862 Y139.834 E13.61939 ; perimeter
 G1 X90.774 Y138.607 E13.66808 ; perimeter
 G1 X90.366 Y136.949 E13.71879 ; perimeter
 G1 X90.862 Y59.572 E16.01626 ; perimeter
 G1 X96.251 Y59.572 E16.17628 ; perimeter
 G1 X96.251 Y69.572 E16.47319 ; perimeter
 G1 X98.509 Y69.572 E16.54023 ; perimeter
 G1 X100.664 Y82.458 E16.92814 ; perimeter
 G1 X99.220 Y82.458 E16.97099 ; perimeter
 G1 X97.411 Y70.658 E17.32544 ; perimeter
 G1 X92.529 Y70.658 E17.47040 ; perimeter
 G1 X92.251 Y118.075 E18.87831 ; perimeter
 G1 X92.545 Y119.380 E18.91803 ; perimeter
 G1 X93.415 Y120.451 E18.95898 ; perimeter
 G1 X94.632 Y120.954 E18.99809 ; perimeter
 G1 X101.655 Y120.954 E19.20660 ; perimeter
 G1 X102.881 Y120.792 E19.24334 ; perimeter
 G1 X103.973 Y119.970 E19.28391 ; perimeter
 G1 X104.576 Y118.716 E19.32522 ; perimeter
 G1 X104.576 Y117.398 E19.36436 ; perimeter
 G1 X103.683 Y111.572 E19.53937 ; perimeter
 G1 X105.532 Y111.572 E19.59427 ; perimeter
 G1 X107.520 Y123.458 E19.95208 ; perimeter
 G1 X95.311 Y123.458 E20.31458 ; perimeter
 G1 X94.894 Y123.100 F12000.000 ; move to first perimeter point
 G1 X94.894 Y132.929 E20.60639 F7200.000 ; perimeter
 G1 X98.094 Y132.929 E20.70141 ; perimeter
 G1 X98.094 Y136.729 E20.81423 ; perimeter
 G1 X99.422 Y136.729 E20.85366 ; perimeter
 G1 X99.422 Y140.071 E20.95290 ; perimeter
 G1 X93.493 Y140.071 E21.12892 ; perimeter
 G1 X92.071 Y139.532 E21.17410 ; perimeter
 G1 X91.100 Y138.436 E21.21756 ; perimeter
 G1 X90.723 Y136.906 E21.26433 ; perimeter
 G1 X91.216 Y59.929 E23.54995 ; perimeter
 G1 X95.894 Y59.929 E23.68883 ; perimeter
 G1 X95.894 Y69.929 E23.98574 ; perimeter
 G1 X98.206 Y69.929 E24.05440 ; perimeter
 G1 X100.242 Y82.100 E24.42082 ; perimeter
 G1 X99.527 Y82.100 E24.44205 ; perimeter
 G1 X97.718 Y70.300 E24.79650 ; perimeter
 G1 X92.174 Y70.300 E24.96109 ; perimeter
 G1 X91.893 Y118.114 E26.38076 ; perimeter
 G1 X92.216 Y119.540 E26.42417 ; perimeter
 G1 X93.195 Y120.746 E26.47030 ; perimeter
 G1 X94.561 Y121.311 E26.51421 ; perimeter
 G1 X101.678 Y121.311 E26.72552 ; perimeter
 G1 X103.021 Y121.133 E26.76574 ; perimeter
 G1 X104.257 Y120.203 E26.81168 ; perimeter
 G1 X104.933 Y118.797 E26.85798 ; perimeter
 G1 X104.933 Y117.371 E26.90035 ; perimeter
 G1 X104.099 Y111.929 E27.06381 ; perimeter
 G1 X105.230 Y111.929 E27.09738 ; perimeter
 G1 X107.098 Y123.100 E27.43369 ; perimeter
 G1 X94.954 Y123.100 E27.79427 ; perimeter
 G1 X94.537 Y122.743 F12000.000 ; move to first perimeter point
 G1 X94.537 Y133.286 E28.10729 F7200.000 ; perimeter
 G1 X97.737 Y133.286 E28.20230 ; perimeter
 G1 X97.737 Y137.086 E28.31513 ; perimeter
 G1 X99.065 Y137.086 E28.35456 ; perimeter
 G1 X99.065 Y139.714 E28.43259 ; perimeter
 G1 X93.559 Y139.714 E28.59607 ; perimeter
 G1 X92.280 Y139.229 E28.63669 ; perimeter
 G1 X91.426 Y138.265 E28.67493 ; perimeter
 G1 X91.080 Y136.864 E28.71776 ; perimeter
 G1 X91.571 Y60.286 E30.99152 ; perimeter
 G1 X95.537 Y60.286 E31.10927 ; perimeter
 G1 X95.537 Y69.943 E31.39601 ; perimeter
 G1 X91.819 Y69.943 E31.50639 ; perimeter
 G1 X91.536 Y118.153 E32.93782 ; perimeter
 G1 X91.886 Y119.700 E32.98492 ; perimeter
 G1 X92.975 Y121.041 E33.03621 ; perimeter
 G1 X94.490 Y121.668 E33.08492 ; perimeter
 G1 X101.702 Y121.668 E33.29903 ; perimeter
 G1 X103.161 Y121.475 E33.34274 ; perimeter
 G1 X104.541 Y120.436 E33.39404 ; perimeter
 G1 X105.290 Y118.879 E33.44534 ; perimeter
 G1 X105.290 Y117.343 E33.49093 ; perimeter
 G1 X104.515 Y112.286 E33.64285 ; perimeter
 G1 X104.928 Y112.286 E33.65510 ; perimeter
 G1 X106.677 Y122.743 E33.96991 ; perimeter
 G1 X94.597 Y122.743 E34.32857 ; perimeter
 G1 F9600
 G1 X94.537 Y133.286 E31.82469 ; wipe and retract
 G1 F9600
 G1 X97.737 Y133.286 E31.06469 ; wipe and retract
 G1 F9600
 G1 X97.737 Y137.086 E30.16219 ; wipe and retract
 G1 F9600
 G1 X99.065 Y137.086 E29.84684 ; wipe and retract
 G1 F9600
 G1 X99.065 Y138.215 E29.57857 ; wipe and retract
 G1 E29.32857 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.200 F12000.000 ; lift Z
 G1 X95.180 Y69.586 F12000.000 ; move to first perimeter point
 G1 Z5.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.869 Y69.586 E5.09831 F7200.000 ; perimeter
 G1 X91.926 Y60.643 E5.36386 ; perimeter
 G1 X95.180 Y60.643 E5.46047 ; perimeter
 G1 X95.180 Y69.526 E5.72422 ; perimeter
 G1 X94.823 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.228 Y69.229 E5.80126 F7200.000 ; perimeter
 G1 X92.281 Y61.000 E6.04560 ; perimeter
 G1 X94.823 Y61.000 E6.12108 ; perimeter
 G1 X94.823 Y69.169 E6.36363 ; perimeter
 G1 F9600
 G1 X92.228 Y69.229 E5.74724 ; wipe and retract
 G1 F9600
 G1 X92.281 Y61.000 E3.79276 ; wipe and retract
 G1 F9600
 G1 X94.823 Y61.000 E3.18906 ; wipe and retract
 G1 F9600
 G1 X94.823 Y67.633 E1.61363 ; wipe and retract
 G1 E1.36363 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.200 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z5.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X98.708 Y137.443 E5.58149 ; perimeter
 G1 X98.708 Y139.357 E5.63832 ; perimeter
 G1 X93.624 Y139.357 E5.78925 ; perimeter
 G1 X92.488 Y138.926 E5.82532 ; perimeter
 G1 X91.751 Y138.094 E5.85833 ; perimeter
 G1 X91.438 Y136.822 E5.89723 ; perimeter
 G1 X91.546 Y119.849 E6.40119 ; perimeter
 G1 X92.754 Y121.337 E6.45809 ; perimeter
 G1 X94.419 Y122.025 E6.51159 ; perimeter
 G1 X101.725 Y122.025 E6.72851 ; perimeter
 G1 X103.301 Y121.817 E6.77570 ; perimeter
 G1 X104.825 Y120.669 E6.83236 ; perimeter
 G1 X105.561 Y119.141 E6.88269 ; perimeter
 G1 X105.716 Y119.163 E6.88735 ; perimeter
 G1 X106.255 Y122.386 E6.98438 ; perimeter
 G1 X94.240 Y122.386 E7.34112 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E7.34570 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E7.39412 ; perimeter
 G1 X105.394 Y120.311 E7.41360 ; perimeter
 G1 X105.549 Y120.333 E7.41826 ; perimeter
 G1 X105.833 Y122.029 E7.46933 ; perimeter
 G1 X103.916 Y122.029 E7.52626 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E7.48294 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.09558 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E6.93976 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E6.90252 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E6.49402 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.03862 ; wipe and retract
 G1 E2.52626 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.200 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z5.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X98.351 Y137.800 E5.24726 ; perimeter
 G1 X98.351 Y139.000 E5.28289 ; perimeter
 G1 X93.690 Y139.000 E5.42128 ; perimeter
 G1 X92.697 Y138.624 E5.45279 ; perimeter
 G1 X92.077 Y137.923 E5.48057 ; perimeter
 G1 X91.795 Y136.780 E5.51554 ; perimeter
 G1 X91.897 Y120.847 E5.98860 ; perimeter
 G1 X92.534 Y121.632 E6.01862 ; perimeter
 G1 X93.823 Y122.165 E6.06001 ; perimeter
 G1 X93.823 Y133.940 E6.40963 ; perimeter
 G1 X93.917 Y134.201 F12000.000 ; move to first infill point
 G1 X93.917 Y138.779 E6.62954 F7200.000 ; infill
 G1 X94.495 Y138.779 E6.65730 ; infill
 G1 X94.495 Y134.201 E6.87722 ; infill
 G1 X95.073 Y134.201 E6.90498 ; infill
 G1 X95.073 Y138.779 E7.12490 ; infill
 G1 X95.651 Y138.779 E7.15266 ; infill
 G1 X95.651 Y134.201 E7.37258 ; infill
 G1 X96.229 Y134.201 E7.40034 ; infill
 G1 X96.229 Y138.779 E7.62025 ; infill
 G1 X96.806 Y138.001 E7.66678 ; infill
 G1 X96.806 Y138.779 E7.70413 ; infill
 G1 X97.384 Y138.779 E7.73189 ; infill
 G1 X97.384 Y138.001 E7.76923 ; infill
 G1 X97.962 Y138.001 E7.79699 ; infill
 G1 X97.962 Y138.779 E7.83434 ; infill
 G1 X93.339 Y138.640 F12000.000 ; move to first infill point
 G1 X93.339 Y122.197 E8.62437 F7200.000 ; infill
 G1 X92.762 Y121.958 E8.65441 ; infill
 G1 X92.762 Y138.308 E9.43995 ; infill
 G1 X92.184 Y136.985 F12000.000 ; move to first infill point
 G1 X92.184 Y133.448 E9.60987 F7200.000 ; infill
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X99.957 Y132.615 E9.69346 F1800.000 ; infill
 G1 F9600
 G1 X98.630 Y132.615 E9.37811 ; wipe and retract
 G1 E4.69346 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.200 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z5.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X104.774 Y121.808 F12000.000 ; move to first infill point
 G1 X104.774 Y121.449 E5.07163 F7200.000 ; infill
 G1 X105.374 Y121.352 E5.10194 ; infill
 G1 X105.374 Y121.808 E5.12466 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.931 E5.19069 F1800.000 ; infill
 G1 X105.579 Y117.931 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.20886 F1800.000 ; infill
 G1 X104.750 Y112.464 E5.35489 ; infill
 G1 F9600
 G1 X105.528 Y117.321 E4.18681 ; wipe and retract
 G1 F9600
 G1 X105.579 Y117.931 E4.04146 ; wipe and retract
 G1 E0.35489 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.200 F12000.000 ; lift Z
 G1 X91.388 Y118.357 F12000.000 ; move to first infill point
 G1 Z5.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.491 Y119.308 E5.02840 F1800.000 ; infill
 G1 X91.703 Y119.744 E5.04280 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E4.92765 ; wipe and retract
 G1 F9600
 G1 X91.388 Y118.357 E4.70044 ; wipe and retract
 G1 E0.04280 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.200 F12000.000 ; lift Z
 G1 X99.855 Y81.922 F12000.000 ; move to first infill point
 G1 Z5.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.594 Y74.053 E5.50170 F1800.000 ; infill
 G1 X97.962 Y70.107 E5.62034 F1800.000 ; infill
 G1 X94.434 Y69.008 F12000.000 ; move to first infill point
 G1 X94.434 Y61.221 E6.01207 F7200.000 ; infill
 G1 X93.829 Y61.221 E6.04251 ; infill
 G1 X93.829 Y69.008 E6.43425 ; infill
 G1 X93.224 Y69.008 E6.46469 ; infill
 G1 X93.224 Y61.221 E6.85642 ; infill
 G1 X92.619 Y65.554 F12000.000 ; move to first infill point
 G1 X92.619 Y69.008 E7.03018 F7200.000 ; infill
 G1 F9600
 G1 X92.619 Y65.554 E6.20988 ; wipe and retract
 G1 E2.03018 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.200 F12000.000 ; lift Z
 G1 Z5.200 F12000.000 ; move to next layer (44)
 G1 Z6.200 F12000.000 ; lift Z
 G1 X101.143 Y84.583 F12000.000 ; move to first support material point
 G1 Z5.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X101.143 Y84.450 E5.00889 F1680.000 ; support material
 G1 X100.570 Y84.450 E5.04714 ; support material
 G1 X99.781 Y85.729 E5.14754 ; support material
 G1 X100.436 Y85.729 E5.19127 ; support material
 G1 X101.143 Y84.583 E5.28122 ; support material
 G1 X101.679 Y86.265 F12000.000 ; move to first support material point
 G1 X101.679 Y83.915 E5.43821 F1680.000 ; support material
 G1 X98.616 Y83.915 E5.64281 ; support material
 G1 X98.976 Y86.265 E5.80164 ; support material
 G1 X101.679 Y86.265 E5.98216 ; support material
 G1 F9600
 G1 X98.976 Y86.265 E5.34037 ; wipe and retract
 G1 F9600
 G1 X98.616 Y83.915 E4.77572 ; wipe and retract
 G1 F9600
 G1 X101.679 Y83.915 E4.04837 ; wipe and retract
 G1 F9600
 G1 X101.679 Y86.265 E3.49024 ; wipe and retract
 G1 E0.98216 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.200 F12000.000 ; lift Z
 G1 X102.773 Y90.115 F12000.000 ; move to first support material point
 G1 Z5.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X102.631 Y89.265 E5.05757 F1680.000 ; support material
 G1 X99.436 Y89.265 E5.27102 ; support material
 G1 X99.566 Y90.115 E5.32847 ; support material
 G1 X102.773 Y90.115 E5.54270 ; support material
 G1 F9600
 G1 X99.566 Y90.115 E4.78107 ; wipe and retract
 G1 F9600
 G1 X99.436 Y89.265 E4.57684 ; wipe and retract
 G1 F9600
 G1 X102.631 Y89.265 E3.81801 ; wipe and retract
 G1 F9600
 G1 X102.773 Y90.115 E3.61333 ; wipe and retract
 G1 E0.54270 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.200 F12000.000 ; lift Z
 G1 X104.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z5.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.524 Y133.015 E5.03814 F7200.000 ; perimeter
 G1 X103.524 Y132.215 E5.06189 ; perimeter
 G1 X109.346 Y132.215 E5.23478 ; perimeter
 G1 X109.992 Y136.074 E5.35096 ; perimeter
 G1 X109.992 Y137.923 E5.40585 ; perimeter
 G1 X109.148 Y139.531 E5.45977 ; perimeter
 G1 X107.653 Y140.562 E5.51368 ; perimeter
 G1 X105.814 Y140.785 E5.56870 ; perimeter
 G1 X103.524 Y140.785 E5.63671 ; perimeter
 G1 X103.524 Y136.015 E5.77836 ; perimeter
 G1 X104.808 Y136.015 E5.81650 ; perimeter
 G1 X104.808 Y133.075 E5.90379 ; perimeter
 G1 X104.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X105.165 Y136.372 F12000.000 ; move to first perimeter point
 G1 X105.165 Y132.572 E6.01661 F7200.000 ; perimeter
 G1 X109.044 Y132.572 E6.13179 ; perimeter
 G1 X109.635 Y136.104 E6.23811 ; perimeter
 G1 X109.635 Y137.835 E6.28951 ; perimeter
 G1 X108.873 Y139.287 E6.33820 ; perimeter
 G1 X107.523 Y140.218 E6.38689 ; perimeter
 G1 X105.792 Y140.428 E6.43865 ; perimeter
 G1 X103.881 Y140.428 E6.49541 ; perimeter
 G1 X103.881 Y136.372 E6.61586 ; perimeter
 G1 X105.105 Y136.372 E6.65222 ; perimeter
 G1 X105.522 Y136.729 F12000.000 ; move to first perimeter point
 G1 X105.522 Y132.929 E6.76504 F7200.000 ; perimeter
 G1 X108.742 Y132.929 E6.86064 ; perimeter
 G1 X109.278 Y136.133 E6.95710 ; perimeter
 G1 X109.278 Y137.747 E7.00500 ; perimeter
 G1 X108.597 Y139.043 E7.04847 ; perimeter
 G1 X107.393 Y139.874 E7.09193 ; perimeter
 G1 X105.771 Y140.071 E7.14044 ; perimeter
 G1 X104.238 Y140.071 E7.18596 ; perimeter
 G1 X104.238 Y136.729 E7.28520 ; perimeter
 G1 X105.462 Y136.729 E7.32156 ; perimeter
 G1 X105.879 Y137.086 F12000.000 ; move to first perimeter point
 G1 X105.879 Y133.286 E7.43439 F7200.000 ; perimeter
 G1 X108.440 Y133.286 E7.51040 ; perimeter
 G1 X108.921 Y136.163 E7.59701 ; perimeter
 G1 X108.921 Y137.659 E7.64142 ; perimeter
 G1 X108.322 Y138.799 E7.67966 ; perimeter
 G1 X107.262 Y139.530 E7.71790 ; perimeter
 G1 X105.749 Y139.714 E7.76315 ; perimeter
 G1 X104.595 Y139.714 E7.79742 ; perimeter
 G1 X104.595 Y137.086 E7.87546 ; perimeter
 G1 X105.819 Y137.086 E7.91182 ; perimeter
 G1 X106.236 Y137.443 F12000.000 ; move to first perimeter point
 G1 X106.236 Y133.643 E8.02465 F7200.000 ; perimeter
 G1 X108.137 Y133.643 E8.08108 ; perimeter
 G1 X108.564 Y136.193 E8.15783 ; perimeter
 G1 X108.564 Y137.571 E8.19875 ; perimeter
 G1 X108.047 Y138.555 E8.23176 ; perimeter
 G1 X107.132 Y139.187 E8.26477 ; perimeter
 G1 X105.728 Y139.357 E8.30677 ; perimeter
 G1 X104.952 Y139.357 E8.32980 ; perimeter
 G1 X104.952 Y137.443 E8.38664 ; perimeter
 G1 X106.176 Y137.443 E8.42299 ; perimeter
 G1 X106.593 Y137.800 F12000.000 ; move to first perimeter point
 G1 X106.593 Y134.000 E8.53582 F7200.000 ; perimeter
 G1 X107.835 Y134.000 E8.57268 ; perimeter
 G1 X108.207 Y136.222 E8.63958 ; perimeter
 G1 X108.207 Y137.482 E8.67700 ; perimeter
 G1 X107.772 Y138.311 E8.70478 ; perimeter
 G1 X107.001 Y138.843 E8.73257 ; perimeter
 G1 X105.706 Y139.000 E8.77131 ; perimeter
 G1 X105.309 Y139.000 E8.78310 ; perimeter
 G1 X105.309 Y137.800 E8.81873 ; perimeter
 G1 X106.533 Y137.800 E8.85509 ; perimeter
 G1 X105.530 Y138.610 F12000.000 ; move to first infill point
 G1 X106.031 Y138.610 E8.88017 F7200.000 ; infill
 G1 X106.795 Y138.007 E8.92898 ; infill
 G1 X107.682 Y138.007 E8.97348 ; infill
 G1 X107.985 Y137.404 E9.00732 ; infill
 G1 X106.795 Y137.404 E9.06700 ; infill
 G1 X106.795 Y136.801 E9.09723 ; infill
 G1 X107.985 Y136.801 E9.15691 ; infill
 G1 X107.985 Y136.198 E9.18715 ; infill
 G1 X106.795 Y136.198 E9.24683 ; infill
 G1 X106.795 Y135.595 E9.27707 ; infill
 G1 X107.895 Y135.595 E9.33223 ; infill
 G1 X107.794 Y134.992 E9.36289 ; infill
 G1 X106.795 Y134.992 E9.41300 ; infill
 G1 X106.795 Y134.388 E9.44323 ; infill
 G1 X107.693 Y134.388 E9.48828 ; infill
 G1 X104.987 Y132.615 F12000.000 ; move to first infill point
 G1 X103.702 Y132.615 E9.56914 F1800.000 ; infill
 G1 F9600
 G1 X104.987 Y132.615 E9.26408 ; wipe and retract
 G1 E4.56914 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.400 F12000.000 ; lift Z
 G1 X104.430 Y102.815 F12000.000 ; move to first perimeter point
 G1 Z5.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X101.979 Y102.815 E5.07276 F7200.000 ; perimeter
 G1 X100.201 Y91.215 E5.42120 ; perimeter
 G1 X102.490 Y91.215 E5.48916 ; perimeter
 G1 X104.420 Y102.755 E5.83658 ; perimeter
 G1 X104.073 Y102.634 F12000.000 ; move inwards before travel
 G1 X104.008 Y102.458 F12000.000 ; move to first perimeter point
 G1 X102.286 Y102.458 E5.88771 F7200.000 ; perimeter
 G1 X100.617 Y91.572 E6.21470 ; perimeter
 G1 X102.188 Y91.572 E6.26133 ; perimeter
 G1 X103.998 Y102.398 E6.58725 ; perimeter
 G1 X103.586 Y102.100 F12000.000 ; move to first perimeter point
 G1 X102.593 Y102.100 E6.61677 F7200.000 ; perimeter
 G1 X101.033 Y91.929 E6.92230 ; perimeter
 G1 X101.885 Y91.929 E6.94761 ; perimeter
 G1 X103.577 Y102.041 E7.25203 ; perimeter
 G1 X103.165 Y101.743 F12000.000 ; move to first perimeter point
 G1 X102.899 Y101.743 E7.25992 F7200.000 ; perimeter
 G1 X102.350 Y98.160 E7.36755 ; perimeter
 G1 X102.560 Y98.127 E7.37387 ; perimeter
 G1 X103.155 Y101.684 E7.48097 ; perimeter
 G1 X102.427 Y97.967 F12000.000 ; move to first infill point
 G1 X101.487 Y92.107 E7.85455 F1800.000 ; infill
 G1 F9600
 G1 X102.427 Y97.967 E6.44510 ; wipe and retract
 G1 E2.85455 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.400 F12000.000 ; lift Z
 G1 X95.608 Y123.815 F12000.000 ; move to first perimeter point
 G1 Z5.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X95.608 Y132.215 E5.24941 F7200.000 ; perimeter
 G1 X100.093 Y132.215 E5.38256 ; perimeter
 G1 X100.093 Y133.015 E5.40631 ; perimeter
 G1 X98.808 Y133.015 E5.44445 ; perimeter
 G1 X98.808 Y136.015 E5.53352 ; perimeter
 G1 X100.093 Y136.015 E5.57166 ; perimeter
 G1 X100.093 Y140.785 E5.71331 ; perimeter
 G1 X93.363 Y140.785 E5.91313 ; perimeter
 G1 X91.653 Y140.137 E5.96743 ; perimeter
 G1 X90.449 Y138.778 E6.02134 ; perimeter
 G1 X90.008 Y136.991 E6.07598 ; perimeter
 G1 X90.507 Y59.215 E8.38531 ; perimeter
 G1 X96.608 Y59.215 E8.56647 ; perimeter
 G1 X96.608 Y69.215 E8.86338 ; perimeter
 G1 X98.811 Y69.215 E8.92879 ; perimeter
 G1 X101.085 Y82.815 E9.33820 ; perimeter
 G1 X98.914 Y82.815 E9.40268 ; perimeter
 G1 X97.105 Y71.015 E9.75713 ; perimeter
 G1 X92.884 Y71.015 E9.88244 ; perimeter
 G1 X92.608 Y118.036 E11.27860 ; perimeter
 G1 X92.875 Y119.220 E11.31462 ; perimeter
 G1 X93.635 Y120.155 E11.35041 ; perimeter
 G1 X94.703 Y120.597 E11.38473 ; perimeter
 G1 X101.631 Y120.597 E11.59043 ; perimeter
 G1 X102.742 Y120.450 E11.62368 ; perimeter
 G1 X103.689 Y119.737 E11.65890 ; perimeter
 G1 X104.219 Y118.635 E11.69521 ; perimeter
 G1 X104.219 Y117.425 E11.73112 ; perimeter
 G1 X103.267 Y111.215 E11.91767 ; perimeter
 G1 X105.835 Y111.215 E11.99390 ; perimeter
 G1 X107.942 Y123.815 E12.37321 ; perimeter
 G1 X95.668 Y123.815 E12.73763 ; perimeter
 G1 X95.208 Y123.815 F12000.000 ; move inwards before travel
 G1 X95.251 Y123.458 F12000.000 ; move to first perimeter point
 G1 X95.251 Y132.572 E13.00824 F7200.000 ; perimeter
 G1 X98.451 Y132.572 E13.10325 ; perimeter
 G1 X98.451 Y136.372 E13.21608 ; perimeter
 G1 X99.736 Y136.372 E13.25422 ; perimeter
 G1 X99.736 Y140.428 E13.37466 ; perimeter
 G1 X93.428 Y140.428 E13.56194 ; perimeter
 G1 X91.862 Y139.834 E13.61168 ; perimeter
 G1 X90.774 Y138.607 E13.66037 ; perimeter
 G1 X90.366 Y136.949 E13.71107 ; perimeter
 G1 X90.862 Y59.572 E16.00855 ; perimeter
 G1 X96.251 Y59.572 E16.16856 ; perimeter
 G1 X96.251 Y69.572 E16.46548 ; perimeter
 G1 X98.509 Y69.572 E16.53251 ; perimeter
 G1 X100.664 Y82.458 E16.92042 ; perimeter
 G1 X99.220 Y82.458 E16.96328 ; perimeter
 G1 X97.411 Y70.658 E17.31773 ; perimeter
 G1 X92.529 Y70.658 E17.46268 ; perimeter
 G1 X92.251 Y118.075 E18.87060 ; perimeter
 G1 X92.545 Y119.380 E18.91031 ; perimeter
 G1 X93.415 Y120.451 E18.95127 ; perimeter
 G1 X94.632 Y120.954 E18.99038 ; perimeter
 G1 X101.655 Y120.954 E19.19889 ; perimeter
 G1 X102.881 Y120.792 E19.23563 ; perimeter
 G1 X103.973 Y119.970 E19.27620 ; perimeter
 G1 X104.576 Y118.716 E19.31751 ; perimeter
 G1 X104.576 Y117.398 E19.35665 ; perimeter
 G1 X103.683 Y111.572 E19.53165 ; perimeter
 G1 X105.532 Y111.572 E19.58656 ; perimeter
 G1 X107.520 Y123.458 E19.94436 ; perimeter
 G1 X95.311 Y123.458 E20.30687 ; perimeter
 G1 X94.894 Y123.100 F12000.000 ; move to first perimeter point
 G1 X94.894 Y132.929 E20.59868 F7200.000 ; perimeter
 G1 X98.094 Y132.929 E20.69369 ; perimeter
 G1 X98.094 Y136.729 E20.80652 ; perimeter
 G1 X99.378 Y136.729 E20.84466 ; perimeter
 G1 X99.378 Y140.071 E20.94390 ; perimeter
 G1 X93.493 Y140.071 E21.11863 ; perimeter
 G1 X92.071 Y139.532 E21.16381 ; perimeter
 G1 X91.100 Y138.436 E21.20728 ; perimeter
 G1 X90.723 Y136.906 E21.25405 ; perimeter
 G1 X91.216 Y59.929 E23.53966 ; perimeter
 G1 X95.894 Y59.929 E23.67855 ; perimeter
 G1 X95.894 Y69.929 E23.97546 ; perimeter
 G1 X98.206 Y69.929 E24.04412 ; perimeter
 G1 X100.242 Y82.100 E24.41053 ; perimeter
 G1 X99.527 Y82.100 E24.43177 ; perimeter
 G1 X97.718 Y70.300 E24.78622 ; perimeter
 G1 X92.174 Y70.300 E24.95081 ; perimeter
 G1 X91.893 Y118.114 E26.37048 ; perimeter
 G1 X92.216 Y119.540 E26.41389 ; perimeter
 G1 X93.195 Y120.746 E26.46001 ; perimeter
 G1 X94.561 Y121.311 E26.50392 ; perimeter
 G1 X101.678 Y121.311 E26.71523 ; perimeter
 G1 X103.021 Y121.133 E26.75546 ; perimeter
 G1 X104.257 Y120.203 E26.80139 ; perimeter
 G1 X104.933 Y118.797 E26.84769 ; perimeter
 G1 X104.933 Y117.371 E26.89006 ; perimeter
 G1 X104.099 Y111.929 E27.05352 ; perimeter
 G1 X105.230 Y111.929 E27.08710 ; perimeter
 G1 X107.098 Y123.100 E27.42341 ; perimeter
 G1 X94.954 Y123.100 E27.78399 ; perimeter
 G1 X94.537 Y122.743 F12000.000 ; move to first perimeter point
 G1 X94.537 Y133.286 E28.09701 F7200.000 ; perimeter
 G1 X97.737 Y133.286 E28.19202 ; perimeter
 G1 X97.737 Y137.086 E28.30485 ; perimeter
 G1 X99.021 Y137.086 E28.34298 ; perimeter
 G1 X99.021 Y139.714 E28.42102 ; perimeter
 G1 X93.559 Y139.714 E28.58321 ; perimeter
 G1 X92.280 Y139.229 E28.62384 ; perimeter
 G1 X91.426 Y138.265 E28.66207 ; perimeter
 G1 X91.080 Y136.864 E28.70491 ; perimeter
 G1 X91.571 Y60.286 E30.97867 ; perimeter
 G1 X95.537 Y60.286 E31.09641 ; perimeter
 G1 X95.537 Y69.943 E31.38316 ; perimeter
 G1 X91.819 Y69.943 E31.49354 ; perimeter
 G1 X91.536 Y118.153 E32.92496 ; perimeter
 G1 X91.886 Y119.700 E32.97207 ; perimeter
 G1 X92.975 Y121.041 E33.02336 ; perimeter
 G1 X94.490 Y121.668 E33.07206 ; perimeter
 G1 X101.702 Y121.668 E33.28618 ; perimeter
 G1 X103.161 Y121.475 E33.32989 ; perimeter
 G1 X104.541 Y120.436 E33.38118 ; perimeter
 G1 X105.290 Y118.879 E33.43248 ; perimeter
 G1 X105.290 Y117.343 E33.47807 ; perimeter
 G1 X104.515 Y112.286 E33.62999 ; perimeter
 G1 X104.928 Y112.286 E33.64224 ; perimeter
 G1 X106.677 Y122.743 E33.95705 ; perimeter
 G1 X94.597 Y122.743 E34.31571 ; perimeter
 G1 F9600
 G1 X94.537 Y133.286 E31.81183 ; wipe and retract
 G1 F9600
 G1 X97.737 Y133.286 E31.05183 ; wipe and retract
 G1 F9600
 G1 X97.737 Y137.086 E30.14933 ; wipe and retract
 G1 F9600
 G1 X99.021 Y137.086 E29.84426 ; wipe and retract
 G1 F9600
 G1 X99.021 Y138.259 E29.56571 ; wipe and retract
 G1 E29.31571 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.400 F12000.000 ; lift Z
 G1 X95.180 Y69.586 F12000.000 ; move to first perimeter point
 G1 Z5.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.869 Y69.586 E5.09831 F7200.000 ; perimeter
 G1 X91.926 Y60.643 E5.36386 ; perimeter
 G1 X95.180 Y60.643 E5.46047 ; perimeter
 G1 X95.180 Y69.526 E5.72422 ; perimeter
 G1 X94.823 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.228 Y69.229 E5.80126 F7200.000 ; perimeter
 G1 X92.281 Y61.000 E6.04560 ; perimeter
 G1 X94.823 Y61.000 E6.12108 ; perimeter
 G1 X94.823 Y69.169 E6.36363 ; perimeter
 G1 F9600
 G1 X92.228 Y69.229 E5.74724 ; wipe and retract
 G1 F9600
 G1 X92.281 Y61.000 E3.79276 ; wipe and retract
 G1 F9600
 G1 X94.823 Y61.000 E3.18906 ; wipe and retract
 G1 F9600
 G1 X94.823 Y67.633 E1.61363 ; wipe and retract
 G1 E1.36363 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.400 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z5.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X98.664 Y137.443 E5.58020 ; perimeter
 G1 X98.664 Y139.357 E5.63704 ; perimeter
 G1 X93.624 Y139.357 E5.78668 ; perimeter
 G1 X92.488 Y138.926 E5.82275 ; perimeter
 G1 X91.751 Y138.094 E5.85576 ; perimeter
 G1 X91.438 Y136.822 E5.89466 ; perimeter
 G1 X91.546 Y119.849 E6.39862 ; perimeter
 G1 X92.754 Y121.337 E6.45552 ; perimeter
 G1 X94.419 Y122.025 E6.50901 ; perimeter
 G1 X101.725 Y122.025 E6.72594 ; perimeter
 G1 X103.301 Y121.817 E6.77313 ; perimeter
 G1 X104.825 Y120.669 E6.82979 ; perimeter
 G1 X105.561 Y119.141 E6.88012 ; perimeter
 G1 X105.716 Y119.163 E6.88478 ; perimeter
 G1 X106.255 Y122.386 E6.98180 ; perimeter
 G1 X94.240 Y122.386 E7.33854 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E7.34313 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E7.39155 ; perimeter
 G1 X105.394 Y120.311 E7.41103 ; perimeter
 G1 X105.549 Y120.333 E7.41569 ; perimeter
 G1 X105.833 Y122.029 E7.46676 ; perimeter
 G1 X103.916 Y122.029 E7.52369 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E7.48037 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.09301 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E6.93719 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E6.89995 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E6.49145 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.03605 ; wipe and retract
 G1 E2.52369 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.400 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z5.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X98.307 Y137.800 E5.24598 ; perimeter
 G1 X98.307 Y139.000 E5.28161 ; perimeter
 G1 X93.690 Y139.000 E5.41870 ; perimeter
 G1 X92.697 Y138.624 E5.45022 ; perimeter
 G1 X92.077 Y137.923 E5.47800 ; perimeter
 G1 X91.795 Y136.780 E5.51297 ; perimeter
 G1 X91.897 Y120.847 E5.98603 ; perimeter
 G1 X92.534 Y121.632 E6.01604 ; perimeter
 G1 X93.823 Y122.165 E6.05744 ; perimeter
 G1 X93.823 Y133.940 E6.40706 ; perimeter
 G1 X93.621 Y134.011 F12000.000 ; move to first infill point
 G1 X92.017 Y134.011 E6.48379 F7200.000 ; infill
 G1 X92.018 Y133.436 E6.51129 ; infill
 G1 X93.621 Y133.436 E6.58797 ; infill
 G1 X93.621 Y132.860 E6.61547 ; infill
 G1 X92.022 Y132.860 E6.69197 ; infill
 G1 X92.025 Y132.285 E6.71947 ; infill
 G1 X93.621 Y132.285 E6.79580 ; infill
 G1 X93.621 Y131.710 E6.82330 ; infill
 G1 X92.029 Y131.710 E6.89944 ; infill
 G1 X92.033 Y131.135 E6.92695 ; infill
 G1 X93.621 Y131.135 E7.00292 ; infill
 G1 X93.621 Y130.560 E7.03042 ; infill
 G1 X92.036 Y130.560 E7.10622 ; infill
 G1 X92.040 Y129.985 E7.13372 ; infill
 G1 X93.621 Y129.985 E7.20934 ; infill
 G1 X93.621 Y129.410 E7.23684 ; infill
 G1 X92.044 Y129.410 E7.31228 ; infill
 G1 X92.047 Y128.835 E7.33978 ; infill
 G1 X93.621 Y128.835 E7.41505 ; infill
 G1 X93.621 Y128.260 E7.44255 ; infill
 G1 X92.051 Y128.260 E7.51764 ; infill
 G1 X92.055 Y127.685 E7.54514 ; infill
 G1 X93.621 Y127.685 E7.62006 ; infill
 G1 X93.621 Y127.109 E7.64756 ; infill
 G1 X92.058 Y127.109 E7.72230 ; infill
 G1 X92.062 Y126.534 E7.74980 ; infill
 G1 X93.621 Y126.534 E7.82436 ; infill
 G1 X93.621 Y125.959 E7.85186 ; infill
 G1 X92.066 Y125.959 E7.92625 ; infill
 G1 X92.069 Y125.384 E7.95375 ; infill
 G1 X93.621 Y125.384 E8.02796 ; infill
 G1 X93.621 Y124.809 E8.05546 ; infill
 G1 X92.073 Y124.809 E8.12949 ; infill
 G1 X92.077 Y124.234 E8.15699 ; infill
 G1 X93.621 Y124.234 E8.23085 ; infill
 G1 X93.621 Y123.659 E8.25835 ; infill
 G1 X92.081 Y123.659 E8.33203 ; infill
 G1 X92.084 Y123.084 E8.35953 ; infill
 G1 X93.621 Y123.084 E8.43304 ; infill
 G1 X93.621 Y122.509 E8.46054 ; infill
 G1 X92.088 Y122.509 E8.53387 ; infill
 G1 X92.092 Y121.934 E8.56137 ; infill
 G1 X92.472 Y121.934 E8.57954 ; infill
 G1 X92.017 Y134.586 F12000.000 ; move to first infill point
 G1 X96.821 Y134.586 E8.80930 F7200.000 ; infill
 G1 X96.821 Y135.161 E8.83680 ; infill
 G1 X92.017 Y135.161 E9.06655 ; infill
 G1 X92.017 Y135.736 E9.09406 ; infill
 G1 X96.821 Y135.736 E9.32381 ; infill
 G1 X96.821 Y136.311 E9.35131 ; infill
 G1 X92.017 Y136.311 E9.58107 ; infill
 G1 X92.034 Y136.886 E9.60858 ; infill
 G1 X96.821 Y136.886 E9.83753 ; infill
 G1 X96.821 Y137.461 E9.86503 ; infill
 G1 X92.175 Y137.461 E10.08719 ; infill
 G1 X92.502 Y138.036 E10.11883 ; infill
 G1 X96.821 Y138.036 E10.32536 ; infill
 G1 X98.086 Y138.612 F12000.000 ; move to first infill point
 G1 X93.538 Y138.612 E10.54286 F7200.000 ; infill
 G1 X91.703 Y119.744 F12000.000 ; move to first infill point
 G1 X91.491 Y119.308 E10.55726 F1800.000 ; infill
 G1 X91.388 Y118.357 E10.58566 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E10.35845 ; wipe and retract
 G1 F9600
 G1 X91.703 Y119.744 E10.24330 ; wipe and retract
 G1 E5.58566 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.400 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z5.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X105.107 Y121.240 F12000.000 ; move to first infill point
 G1 X105.494 Y121.240 E5.07167 F7200.000 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.931 E5.13770 F1800.000 ; infill
 G1 X105.579 Y117.931 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.15587 F1800.000 ; infill
 G1 X104.750 Y112.464 E5.30190 ; infill
 G1 F9600
 G1 X105.528 Y117.321 E4.13382 ; wipe and retract
 G1 F9600
 G1 X105.579 Y117.931 E3.98847 ; wipe and retract
 G1 E0.30190 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.400 F12000.000 ; lift Z
 G1 X99.914 Y132.615 F12000.000 ; move to first infill point
 G1 Z5.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.630 Y132.615 E5.08086 F1800.000 ; infill
 G1 F9600
 G1 X99.914 Y132.615 E4.77579 ; wipe and retract
 G1 E0.08086 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.400 F12000.000 ; lift Z
 G1 X99.855 Y81.922 F12000.000 ; move to first infill point
 G1 Z5.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.594 Y74.053 E5.50170 F1800.000 ; infill
 G1 X97.962 Y70.107 E5.62034 F1800.000 ; infill
 G1 X94.601 Y68.841 F12000.000 ; move to first infill point
 G1 X92.452 Y68.841 E5.72279 F7200.000 ; infill
 G1 X92.452 Y68.267 E5.75011 ; infill
 G1 X94.601 Y68.267 E5.85256 ; infill
 G1 X94.601 Y67.694 E5.87989 ; infill
 G1 X92.452 Y67.694 E5.98234 ; infill
 G1 X92.452 Y67.121 E6.00966 ; infill
 G1 X94.601 Y67.121 E6.11212 ; infill
 G1 X94.601 Y66.548 E6.13944 ; infill
 G1 X92.452 Y66.548 E6.24189 ; infill
 G1 X92.452 Y65.974 E6.26922 ; infill
 G1 X94.601 Y65.974 E6.37167 ; infill
 G1 X94.601 Y65.401 E6.39899 ; infill
 G1 X92.454 Y65.401 E6.50135 ; infill
 G1 X92.458 Y64.828 E6.52867 ; infill
 G1 X94.601 Y64.828 E6.63085 ; infill
 G1 X94.601 Y64.255 E6.65817 ; infill
 G1 X92.461 Y64.255 E6.76018 ; infill
 G1 X92.465 Y63.681 E6.78750 ; infill
 G1 X94.601 Y63.681 E6.88933 ; infill
 G1 X94.601 Y63.108 E6.91666 ; infill
 G1 X92.469 Y63.108 E7.01831 ; infill
 G1 X92.472 Y62.535 E7.04563 ; infill
 G1 X94.601 Y62.535 E7.14711 ; infill
 G1 X94.601 Y61.962 E7.17444 ; infill
 G1 X92.476 Y61.962 E7.27574 ; infill
 G1 X92.480 Y61.388 E7.30307 ; infill
 G1 X94.601 Y61.388 E7.40419 ; infill
 G1 F9600
 G1 X92.480 Y61.388 E6.90031 ; wipe and retract
 G1 F9600
 G1 X92.476 Y61.962 E6.76416 ; wipe and retract
 G1 F9600
 G1 X94.601 Y61.962 E6.25941 ; wipe and retract
 G1 F9600
 G1 X94.601 Y62.535 E6.12326 ; wipe and retract
 G1 F9600
 G1 X92.472 Y62.535 E5.61763 ; wipe and retract
 G1 F9600
 G1 X92.469 Y63.108 E5.48148 ; wipe and retract
 G1 F9600
 G1 X94.601 Y63.108 E4.97498 ; wipe and retract
 G1 F9600
 G1 X94.601 Y63.681 E4.83883 ; wipe and retract
 G1 F9600
 G1 X92.465 Y63.681 E4.33146 ; wipe and retract
 G1 F9600
 G1 X92.461 Y64.255 E4.19531 ; wipe and retract
 G1 F9600
 G1 X94.601 Y64.255 E3.68707 ; wipe and retract
 G1 F9600
 G1 X94.601 Y64.828 E3.55092 ; wipe and retract
 G1 F9600
 G1 X92.458 Y64.828 E3.04180 ; wipe and retract
 G1 F9600
 G1 X92.454 Y65.401 E2.90565 ; wipe and retract
 G1 F9600
 G1 X93.513 Y65.401 E2.65419 ; wipe and retract
 G1 E2.40419 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.400 F12000.000 ; lift Z
 G1 X101.979 Y85.362 F12000.000 ; move to first support material point
 G1 Z5.500 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X101.737 Y83.915 E5.09804 F1680.000 ; support material
 G1 X98.616 Y83.915 E5.30650 ; support material
 G1 X99.022 Y86.565 E5.48561 ; support material
 G1 X101.979 Y86.565 E5.68310 ; support material
 G1 X101.979 Y85.362 E5.76344 ; support material
 G1 X100.250 Y86.029 F12000.000 ; move to first support material point
 G1 X101.225 Y84.450 E5.88739 F1680.000 ; support material
 G1 X100.570 Y84.450 E5.93113 ; support material
 G1 X99.596 Y86.029 E6.05508 ; support material
 G1 X100.250 Y86.029 E6.09882 ; support material
 G1 F9600
 G1 X99.596 Y86.029 E5.94333 ; wipe and retract
 G1 F9600
 G1 X100.570 Y84.450 E5.50267 ; wipe and retract
 G1 F9600
 G1 X101.225 Y84.450 E5.34718 ; wipe and retract
 G1 F9600
 G1 X100.250 Y86.029 E4.90653 ; wipe and retract
 G1 E1.09882 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.500 F12000.000 ; lift Z
 G1 X102.773 Y90.115 F12000.000 ; move to first support material point
 G1 Z5.500 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X102.631 Y89.265 E5.05757 F1680.000 ; support material
 G1 X99.436 Y89.265 E5.27102 ; support material
 G1 X99.566 Y90.115 E5.32847 ; support material
 G1 X102.773 Y90.115 E5.54270 ; support material
 M106 S242.25 ; enable fan
 G1 F9600
 G1 X99.566 Y90.115 E4.78107 ; wipe and retract
 G1 F9600
 G1 X99.436 Y89.265 E4.57684 ; wipe and retract
 G1 F9600
 G1 X102.631 Y89.265 E3.81801 ; wipe and retract
 G1 F9600
 G1 X102.773 Y90.115 E3.61333 ; wipe and retract
 G1 E0.54270 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.500 F12000.000 ; lift Z
 G1 X104.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z5.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.524 Y133.015 E5.03814 F7200.000 ; perimeter
 G1 X103.524 Y132.215 E5.06189 ; perimeter
 G1 X109.346 Y132.215 E5.23478 ; perimeter
 G1 X109.992 Y136.074 E5.35096 ; perimeter
 G1 X109.992 Y137.923 E5.40585 ; perimeter
 G1 X109.148 Y139.531 E5.45977 ; perimeter
 G1 X107.653 Y140.562 E5.51368 ; perimeter
 G1 X105.814 Y140.785 E5.56870 ; perimeter
 G1 X103.524 Y140.785 E5.63671 ; perimeter
 G1 X103.524 Y136.015 E5.77836 ; perimeter
 G1 X104.808 Y136.015 E5.81650 ; perimeter
 G1 X104.808 Y133.075 E5.90379 ; perimeter
 G1 X104.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X105.165 Y136.372 F12000.000 ; move to first perimeter point
 G1 X105.165 Y132.572 E6.01661 F7200.000 ; perimeter
 G1 X109.044 Y132.572 E6.13179 ; perimeter
 G1 X109.635 Y136.104 E6.23811 ; perimeter
 G1 X109.635 Y137.835 E6.28951 ; perimeter
 G1 X108.873 Y139.287 E6.33820 ; perimeter
 G1 X107.523 Y140.218 E6.38689 ; perimeter
 G1 X105.792 Y140.428 E6.43865 ; perimeter
 G1 X103.881 Y140.428 E6.49541 ; perimeter
 G1 X103.881 Y136.372 E6.61586 ; perimeter
 G1 X105.105 Y136.372 E6.65222 ; perimeter
 G1 X105.522 Y136.729 F12000.000 ; move to first perimeter point
 G1 X105.522 Y132.929 E6.76504 F7200.000 ; perimeter
 G1 X108.742 Y132.929 E6.86064 ; perimeter
 G1 X109.278 Y136.133 E6.95710 ; perimeter
 G1 X109.278 Y137.747 E7.00500 ; perimeter
 G1 X108.597 Y139.043 E7.04847 ; perimeter
 G1 X107.393 Y139.874 E7.09193 ; perimeter
 G1 X105.771 Y140.071 E7.14044 ; perimeter
 G1 X104.238 Y140.071 E7.18596 ; perimeter
 G1 X104.238 Y136.729 E7.28520 ; perimeter
 G1 X105.462 Y136.729 E7.32156 ; perimeter
 G1 X105.879 Y137.086 F12000.000 ; move to first perimeter point
 G1 X105.879 Y133.286 E7.43439 F7200.000 ; perimeter
 G1 X108.440 Y133.286 E7.51040 ; perimeter
 G1 X108.921 Y136.163 E7.59701 ; perimeter
 G1 X108.921 Y137.659 E7.64142 ; perimeter
 G1 X108.322 Y138.799 E7.67966 ; perimeter
 G1 X107.262 Y139.530 E7.71790 ; perimeter
 G1 X105.749 Y139.714 E7.76315 ; perimeter
 G1 X104.595 Y139.714 E7.79742 ; perimeter
 G1 X104.595 Y137.086 E7.87546 ; perimeter
 G1 X105.819 Y137.086 E7.91182 ; perimeter
 G1 X106.236 Y137.443 F12000.000 ; move to first perimeter point
 G1 X106.236 Y133.643 E8.02465 F7200.000 ; perimeter
 G1 X108.137 Y133.643 E8.08108 ; perimeter
 G1 X108.564 Y136.193 E8.15783 ; perimeter
 G1 X108.564 Y137.571 E8.19875 ; perimeter
 G1 X108.047 Y138.555 E8.23176 ; perimeter
 G1 X107.132 Y139.187 E8.26477 ; perimeter
 G1 X105.728 Y139.357 E8.30677 ; perimeter
 G1 X104.952 Y139.357 E8.32980 ; perimeter
 G1 X104.952 Y137.443 E8.38664 ; perimeter
 G1 X106.176 Y137.443 E8.42299 ; perimeter
 G1 X106.593 Y137.800 F12000.000 ; move to first perimeter point
 G1 X106.593 Y134.000 E8.53582 F7200.000 ; perimeter
 G1 X107.835 Y134.000 E8.57268 ; perimeter
 G1 X108.207 Y136.222 E8.63958 ; perimeter
 G1 X108.207 Y137.482 E8.67700 ; perimeter
 G1 X107.772 Y138.311 E8.70478 ; perimeter
 G1 X107.001 Y138.843 E8.73257 ; perimeter
 G1 X105.706 Y139.000 E8.77131 ; perimeter
 G1 X105.309 Y139.000 E8.78310 ; perimeter
 G1 X105.309 Y137.800 E8.81873 ; perimeter
 G1 X106.533 Y137.800 E8.85509 ; perimeter
 G1 X105.697 Y138.777 F12000.000 ; move to first infill point
 G1 X105.697 Y138.001 E8.90066 F7200.000 ; infill
 G1 X106.404 Y138.001 E8.94220 ; infill
 G1 X106.404 Y138.711 E8.98392 ; infill
 G1 X107.111 Y138.486 E9.02751 ; infill
 G1 X107.111 Y134.221 E9.27818 ; infill
 G1 X107.818 Y135.966 F12000.000 ; move to first infill point
 G1 X107.818 Y137.597 E9.37403 F7200.000 ; infill
 G1 X104.987 Y132.615 F12000.000 ; move to first infill point
 G1 X103.702 Y132.615 E9.45489 F1800.000 ; infill
 G1 F9600
 G1 X104.987 Y132.615 E9.14982 ; wipe and retract
 G1 E4.45489 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.600 F12000.000 ; lift Z
 G1 X104.430 Y102.815 F12000.000 ; move to first perimeter point
 G1 Z5.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X101.979 Y102.815 E5.07276 F7200.000 ; perimeter
 G1 X100.201 Y91.215 E5.42120 ; perimeter
 G1 X102.490 Y91.215 E5.48916 ; perimeter
 G1 X104.420 Y102.755 E5.83658 ; perimeter
 G1 X104.073 Y102.634 F12000.000 ; move inwards before travel
 G1 X104.008 Y102.458 F12000.000 ; move to first perimeter point
 G1 X102.286 Y102.458 E5.88771 F7200.000 ; perimeter
 G1 X100.617 Y91.572 E6.21470 ; perimeter
 G1 X102.188 Y91.572 E6.26133 ; perimeter
 G1 X103.998 Y102.398 E6.58725 ; perimeter
 G1 X103.586 Y102.100 F12000.000 ; move to first perimeter point
 G1 X102.593 Y102.100 E6.61677 F7200.000 ; perimeter
 G1 X101.033 Y91.929 E6.92230 ; perimeter
 G1 X101.885 Y91.929 E6.94761 ; perimeter
 G1 X103.577 Y102.041 E7.25203 ; perimeter
 G1 X103.165 Y101.743 F12000.000 ; move to first perimeter point
 G1 X102.899 Y101.743 E7.25992 F7200.000 ; perimeter
 G1 X102.350 Y98.160 E7.36755 ; perimeter
 G1 X102.560 Y98.127 E7.37387 ; perimeter
 G1 X103.155 Y101.684 E7.48097 ; perimeter
 G1 X102.427 Y97.967 F12000.000 ; move to first infill point
 G1 X101.487 Y92.107 E7.85455 F1800.000 ; infill
 G1 F9600
 G1 X102.427 Y97.967 E6.44510 ; wipe and retract
 G1 E2.85455 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.600 F12000.000 ; lift Z
 G1 X95.608 Y123.815 F12000.000 ; move to first perimeter point
 G1 Z5.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X95.608 Y132.215 E5.24941 F7200.000 ; perimeter
 G1 X100.093 Y132.215 E5.38256 ; perimeter
 G1 X100.093 Y133.015 E5.40631 ; perimeter
 G1 X98.808 Y133.015 E5.44445 ; perimeter
 G1 X98.808 Y136.015 E5.53352 ; perimeter
 G1 X100.093 Y136.015 E5.57166 ; perimeter
 G1 X100.093 Y140.785 E5.71331 ; perimeter
 G1 X93.363 Y140.785 E5.91313 ; perimeter
 G1 X91.653 Y140.137 E5.96743 ; perimeter
 G1 X90.449 Y138.778 E6.02134 ; perimeter
 G1 X90.008 Y136.991 E6.07598 ; perimeter
 G1 X90.507 Y59.215 E8.38531 ; perimeter
 G1 X96.608 Y59.215 E8.56647 ; perimeter
 G1 X96.608 Y69.215 E8.86338 ; perimeter
 G1 X98.811 Y69.215 E8.92879 ; perimeter
 G1 X101.085 Y82.815 E9.33820 ; perimeter
 G1 X98.914 Y82.815 E9.40268 ; perimeter
 G1 X97.105 Y71.015 E9.75713 ; perimeter
 G1 X92.884 Y71.015 E9.88244 ; perimeter
 G1 X92.608 Y118.036 E11.27860 ; perimeter
 G1 X92.875 Y119.220 E11.31462 ; perimeter
 G1 X93.635 Y120.155 E11.35041 ; perimeter
 G1 X94.703 Y120.597 E11.38473 ; perimeter
 G1 X101.631 Y120.597 E11.59043 ; perimeter
 G1 X102.742 Y120.450 E11.62368 ; perimeter
 G1 X103.689 Y119.737 E11.65890 ; perimeter
 G1 X104.219 Y118.635 E11.69521 ; perimeter
 G1 X104.219 Y117.425 E11.73112 ; perimeter
 G1 X103.267 Y111.215 E11.91767 ; perimeter
 G1 X105.835 Y111.215 E11.99390 ; perimeter
 G1 X107.942 Y123.815 E12.37321 ; perimeter
 G1 X95.668 Y123.815 E12.73763 ; perimeter
 G1 X95.208 Y123.815 F12000.000 ; move inwards before travel
 G1 X95.251 Y123.458 F12000.000 ; move to first perimeter point
 G1 X95.251 Y132.572 E13.00824 F7200.000 ; perimeter
 G1 X98.451 Y132.572 E13.10325 ; perimeter
 G1 X98.451 Y136.372 E13.21608 ; perimeter
 G1 X99.736 Y136.372 E13.25422 ; perimeter
 G1 X99.736 Y140.428 E13.37466 ; perimeter
 G1 X93.428 Y140.428 E13.56194 ; perimeter
 G1 X91.862 Y139.834 E13.61168 ; perimeter
 G1 X90.774 Y138.607 E13.66037 ; perimeter
 G1 X90.366 Y136.949 E13.71107 ; perimeter
 G1 X90.862 Y59.572 E16.00855 ; perimeter
 G1 X96.251 Y59.572 E16.16856 ; perimeter
 G1 X96.251 Y69.572 E16.46548 ; perimeter
 G1 X98.509 Y69.572 E16.53251 ; perimeter
 G1 X100.664 Y82.458 E16.92042 ; perimeter
 G1 X99.220 Y82.458 E16.96328 ; perimeter
 G1 X97.411 Y70.658 E17.31773 ; perimeter
 G1 X92.529 Y70.658 E17.46268 ; perimeter
 G1 X92.251 Y118.075 E18.87060 ; perimeter
 G1 X92.545 Y119.380 E18.91031 ; perimeter
 G1 X93.415 Y120.451 E18.95127 ; perimeter
 G1 X94.632 Y120.954 E18.99038 ; perimeter
 G1 X101.655 Y120.954 E19.19889 ; perimeter
 G1 X102.881 Y120.792 E19.23563 ; perimeter
 G1 X103.973 Y119.970 E19.27620 ; perimeter
 G1 X104.576 Y118.716 E19.31751 ; perimeter
 G1 X104.576 Y117.398 E19.35665 ; perimeter
 G1 X103.683 Y111.572 E19.53165 ; perimeter
 G1 X105.532 Y111.572 E19.58656 ; perimeter
 G1 X107.520 Y123.458 E19.94436 ; perimeter
 G1 X95.311 Y123.458 E20.30687 ; perimeter
 G1 X94.894 Y123.100 F12000.000 ; move to first perimeter point
 G1 X94.894 Y132.929 E20.59868 F7200.000 ; perimeter
 G1 X98.094 Y132.929 E20.69369 ; perimeter
 G1 X98.094 Y136.729 E20.80652 ; perimeter
 G1 X99.378 Y136.729 E20.84466 ; perimeter
 G1 X99.378 Y140.071 E20.94390 ; perimeter
 G1 X93.493 Y140.071 E21.11863 ; perimeter
 G1 X92.071 Y139.532 E21.16381 ; perimeter
 G1 X91.100 Y138.436 E21.20728 ; perimeter
 G1 X90.723 Y136.906 E21.25405 ; perimeter
 G1 X91.216 Y59.929 E23.53966 ; perimeter
 G1 X95.894 Y59.929 E23.67855 ; perimeter
 G1 X95.894 Y69.929 E23.97546 ; perimeter
 G1 X98.206 Y69.929 E24.04412 ; perimeter
 G1 X100.242 Y82.100 E24.41053 ; perimeter
 G1 X99.527 Y82.100 E24.43177 ; perimeter
 G1 X97.718 Y70.300 E24.78622 ; perimeter
 G1 X92.174 Y70.300 E24.95081 ; perimeter
 G1 X91.893 Y118.114 E26.37048 ; perimeter
 G1 X92.216 Y119.540 E26.41389 ; perimeter
 G1 X93.195 Y120.746 E26.46001 ; perimeter
 G1 X94.561 Y121.311 E26.50392 ; perimeter
 G1 X101.678 Y121.311 E26.71523 ; perimeter
 G1 X103.021 Y121.133 E26.75546 ; perimeter
 G1 X104.257 Y120.203 E26.80139 ; perimeter
 G1 X104.933 Y118.797 E26.84769 ; perimeter
 G1 X104.933 Y117.371 E26.89006 ; perimeter
 G1 X104.099 Y111.929 E27.05352 ; perimeter
 G1 X105.230 Y111.929 E27.08710 ; perimeter
 G1 X107.098 Y123.100 E27.42341 ; perimeter
 G1 X94.954 Y123.100 E27.78399 ; perimeter
 G1 X94.537 Y122.743 F12000.000 ; move to first perimeter point
 G1 X94.537 Y133.286 E28.09701 F7200.000 ; perimeter
 G1 X97.737 Y133.286 E28.19202 ; perimeter
 G1 X97.737 Y137.086 E28.30485 ; perimeter
 G1 X99.021 Y137.086 E28.34298 ; perimeter
 G1 X99.021 Y139.714 E28.42102 ; perimeter
 G1 X93.559 Y139.714 E28.58321 ; perimeter
 G1 X92.280 Y139.229 E28.62384 ; perimeter
 G1 X91.426 Y138.265 E28.66207 ; perimeter
 G1 X91.080 Y136.864 E28.70491 ; perimeter
 G1 X91.571 Y60.286 E30.97867 ; perimeter
 G1 X95.537 Y60.286 E31.09641 ; perimeter
 G1 X95.537 Y69.943 E31.38316 ; perimeter
 G1 X91.819 Y69.943 E31.49354 ; perimeter
 G1 X91.536 Y118.153 E32.92496 ; perimeter
 G1 X91.886 Y119.700 E32.97207 ; perimeter
 G1 X92.975 Y121.041 E33.02336 ; perimeter
 G1 X94.490 Y121.668 E33.07206 ; perimeter
 G1 X101.702 Y121.668 E33.28618 ; perimeter
 G1 X103.161 Y121.475 E33.32988 ; perimeter
 G1 X104.541 Y120.436 E33.38118 ; perimeter
 G1 X105.290 Y118.879 E33.43248 ; perimeter
 G1 X105.290 Y117.343 E33.47807 ; perimeter
 G1 X104.515 Y112.286 E33.62999 ; perimeter
 G1 X104.928 Y112.286 E33.64224 ; perimeter
 G1 X106.677 Y122.743 E33.95705 ; perimeter
 G1 X94.597 Y122.743 E34.31571 ; perimeter
 G1 F9600
 G1 X94.537 Y133.286 E31.81183 ; wipe and retract
 G1 F9600
 G1 X97.737 Y133.286 E31.05183 ; wipe and retract
 G1 F9600
 G1 X97.737 Y137.086 E30.14933 ; wipe and retract
 G1 F9600
 G1 X99.021 Y137.086 E29.84426 ; wipe and retract
 G1 F9600
 G1 X99.021 Y138.259 E29.56571 ; wipe and retract
 G1 E29.31571 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.600 F12000.000 ; lift Z
 G1 X95.180 Y69.586 F12000.000 ; move to first perimeter point
 G1 Z5.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.869 Y69.586 E5.09831 F7200.000 ; perimeter
 G1 X91.926 Y60.643 E5.36386 ; perimeter
 G1 X95.180 Y60.643 E5.46047 ; perimeter
 G1 X95.180 Y69.526 E5.72422 ; perimeter
 G1 X94.823 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.228 Y69.229 E5.80126 F7200.000 ; perimeter
 G1 X92.281 Y61.000 E6.04560 ; perimeter
 G1 X94.823 Y61.000 E6.12108 ; perimeter
 G1 X94.823 Y69.169 E6.36363 ; perimeter
 G1 F9600
 G1 X92.228 Y69.229 E5.74724 ; wipe and retract
 G1 F9600
 G1 X92.281 Y61.000 E3.79276 ; wipe and retract
 G1 F9600
 G1 X94.823 Y61.000 E3.18906 ; wipe and retract
 G1 F9600
 G1 X94.823 Y67.633 E1.61363 ; wipe and retract
 G1 E1.36363 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.600 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z5.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X98.664 Y137.443 E5.58020 ; perimeter
 G1 X98.664 Y139.357 E5.63704 ; perimeter
 G1 X93.624 Y139.357 E5.78668 ; perimeter
 G1 X92.488 Y138.926 E5.82275 ; perimeter
 G1 X91.751 Y138.094 E5.85576 ; perimeter
 G1 X91.438 Y136.822 E5.89466 ; perimeter
 G1 X91.546 Y119.849 E6.39862 ; perimeter
 G1 X92.754 Y121.337 E6.45552 ; perimeter
 G1 X94.419 Y122.025 E6.50901 ; perimeter
 G1 X101.725 Y122.025 E6.72594 ; perimeter
 G1 X103.301 Y121.817 E6.77313 ; perimeter
 G1 X104.825 Y120.669 E6.82979 ; perimeter
 G1 X105.561 Y119.141 E6.88012 ; perimeter
 G1 X105.716 Y119.163 E6.88478 ; perimeter
 G1 X106.255 Y122.386 E6.98180 ; perimeter
 G1 X94.240 Y122.386 E7.33854 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E7.34313 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E7.39155 ; perimeter
 G1 X105.394 Y120.311 E7.41103 ; perimeter
 G1 X105.549 Y120.333 E7.41569 ; perimeter
 G1 X105.833 Y122.029 E7.46676 ; perimeter
 G1 X103.916 Y122.029 E7.52369 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E7.48037 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.09301 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E6.93719 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E6.89995 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E6.49145 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.03605 ; wipe and retract
 G1 E2.52369 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.600 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z5.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X98.307 Y137.800 E5.24598 ; perimeter
 G1 X98.307 Y139.000 E5.28161 ; perimeter
 G1 X93.690 Y139.000 E5.41870 ; perimeter
 G1 X92.697 Y138.624 E5.45022 ; perimeter
 G1 X92.077 Y137.923 E5.47800 ; perimeter
 G1 X91.795 Y136.780 E5.51297 ; perimeter
 G1 X91.897 Y120.847 E5.98603 ; perimeter
 G1 X92.534 Y121.632 E6.01604 ; perimeter
 G1 X93.823 Y122.165 E6.05744 ; perimeter
 G1 X93.823 Y133.940 E6.40706 ; perimeter
 G1 X93.904 Y134.201 F12000.000 ; move to first infill point
 G1 X93.904 Y138.779 E6.62532 F7200.000 ; infill
 G1 X94.478 Y138.779 E6.65267 ; infill
 G1 X94.478 Y134.201 E6.87094 ; infill
 G1 X95.051 Y134.201 E6.89829 ; infill
 G1 X95.051 Y138.779 E7.11655 ; infill
 G1 X95.625 Y138.779 E7.14390 ; infill
 G1 X95.625 Y134.201 E7.36217 ; infill
 G1 X96.198 Y134.201 E7.38952 ; infill
 G1 X96.198 Y138.779 E7.60778 ; infill
 G1 X96.772 Y138.001 E7.65384 ; infill
 G1 X96.772 Y138.779 E7.69091 ; infill
 G1 X97.345 Y138.779 E7.71825 ; infill
 G1 X97.345 Y138.001 E7.75532 ; infill
 G1 X97.919 Y138.001 E7.78266 ; infill
 G1 X97.919 Y138.779 E7.81973 ; infill
 G1 X93.331 Y138.637 F12000.000 ; move to first infill point
 G1 X93.331 Y122.193 E8.60385 F7200.000 ; infill
 G1 X92.757 Y121.956 E8.63345 ; infill
 G1 X92.757 Y138.303 E9.41295 ; infill
 G1 X92.184 Y136.985 F12000.000 ; move to first infill point
 G1 X92.184 Y133.448 E9.58160 F7200.000 ; infill
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X99.914 Y132.615 E9.66246 F1800.000 ; infill
 G1 F9600
 G1 X98.630 Y132.615 E9.35739 ; wipe and retract
 G1 E4.66246 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.600 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z5.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X104.774 Y121.808 F12000.000 ; move to first infill point
 G1 X104.774 Y121.449 E5.07163 F7200.000 ; infill
 G1 X105.374 Y121.352 E5.10194 ; infill
 G1 X105.374 Y121.808 E5.12466 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.931 E5.19069 F1800.000 ; infill
 G1 X105.579 Y117.931 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.20886 F1800.000 ; infill
 G1 X104.750 Y112.464 E5.35489 ; infill
 G1 F9600
 G1 X105.528 Y117.321 E4.18681 ; wipe and retract
 G1 F9600
 G1 X105.579 Y117.931 E4.04146 ; wipe and retract
 G1 E0.35489 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.600 F12000.000 ; lift Z
 G1 X91.388 Y118.357 F12000.000 ; move to first infill point
 G1 Z5.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.491 Y119.308 E5.02840 F1800.000 ; infill
 G1 X91.703 Y119.744 E5.04280 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E4.92765 ; wipe and retract
 G1 F9600
 G1 X91.388 Y118.357 E4.70044 ; wipe and retract
 G1 E0.04280 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.600 F12000.000 ; lift Z
 G1 X99.855 Y81.922 F12000.000 ; move to first infill point
 G1 Z5.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.594 Y74.053 E5.50170 F1800.000 ; infill
 G1 X98.594 Y74.053 F12000.000 ; move to first infill point
 G1 X97.962 Y70.107 E5.62034 F1800.000 ; infill
 G1 X94.434 Y69.008 F12000.000 ; move to first infill point
 G1 X94.434 Y61.221 E6.01207 F7200.000 ; infill
 G1 X93.829 Y61.221 E6.04251 ; infill
 G1 X93.829 Y69.008 E6.43424 ; infill
 G1 X93.224 Y69.008 E6.46468 ; infill
 G1 X93.224 Y61.221 E6.85642 ; infill
 G1 X92.619 Y65.554 F12000.000 ; move to first infill point
 G1 X92.619 Y69.008 E7.03018 F7200.000 ; infill
 M106 S239.7 ; enable fan
 G1 F9600
 G1 X92.619 Y65.554 E6.20988 ; wipe and retract
 G1 E2.03018 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.600 F12000.000 ; lift Z
 G1 X104.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z5.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.524 Y133.015 E5.03814 F7200.000 ; perimeter
 G1 X103.524 Y132.215 E5.06189 ; perimeter
 G1 X109.346 Y132.215 E5.23478 ; perimeter
 G1 X109.992 Y136.074 E5.35096 ; perimeter
 G1 X109.992 Y137.923 E5.40585 ; perimeter
 G1 X109.148 Y139.531 E5.45977 ; perimeter
 G1 X107.653 Y140.562 E5.51368 ; perimeter
 G1 X105.814 Y140.785 E5.56870 ; perimeter
 G1 X103.524 Y140.785 E5.63671 ; perimeter
 G1 X103.524 Y136.015 E5.77836 ; perimeter
 G1 X104.808 Y136.015 E5.81650 ; perimeter
 G1 X104.808 Y133.075 E5.90379 ; perimeter
 G1 X104.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X105.165 Y136.372 F12000.000 ; move to first perimeter point
 G1 X105.165 Y132.572 E6.01661 F7200.000 ; perimeter
 G1 X109.044 Y132.572 E6.13179 ; perimeter
 G1 X109.635 Y136.104 E6.23811 ; perimeter
 G1 X109.635 Y137.835 E6.28951 ; perimeter
 G1 X108.873 Y139.287 E6.33820 ; perimeter
 G1 X107.523 Y140.218 E6.38689 ; perimeter
 G1 X105.792 Y140.428 E6.43865 ; perimeter
 G1 X103.881 Y140.428 E6.49541 ; perimeter
 G1 X103.881 Y136.372 E6.61586 ; perimeter
 G1 X105.105 Y136.372 E6.65222 ; perimeter
 G1 X105.522 Y136.729 F12000.000 ; move to first perimeter point
 G1 X105.522 Y132.929 E6.76504 F7200.000 ; perimeter
 G1 X108.742 Y132.929 E6.86064 ; perimeter
 G1 X109.278 Y136.133 E6.95710 ; perimeter
 G1 X109.278 Y137.747 E7.00500 ; perimeter
 G1 X108.597 Y139.043 E7.04847 ; perimeter
 G1 X107.393 Y139.874 E7.09193 ; perimeter
 G1 X105.771 Y140.071 E7.14044 ; perimeter
 G1 X104.238 Y140.071 E7.18596 ; perimeter
 G1 X104.238 Y136.729 E7.28520 ; perimeter
 G1 X105.462 Y136.729 E7.32156 ; perimeter
 G1 X105.879 Y137.086 F12000.000 ; move to first perimeter point
 G1 X105.879 Y133.286 E7.43439 F7200.000 ; perimeter
 G1 X108.440 Y133.286 E7.51040 ; perimeter
 G1 X108.921 Y136.163 E7.59701 ; perimeter
 G1 X108.921 Y137.659 E7.64142 ; perimeter
 G1 X108.322 Y138.799 E7.67966 ; perimeter
 G1 X107.262 Y139.530 E7.71790 ; perimeter
 G1 X105.749 Y139.714 E7.76315 ; perimeter
 G1 X104.595 Y139.714 E7.79742 ; perimeter
 G1 X104.595 Y137.086 E7.87546 ; perimeter
 G1 X105.819 Y137.086 E7.91182 ; perimeter
 G1 X106.236 Y137.443 F12000.000 ; move to first perimeter point
 G1 X106.236 Y133.643 E8.02465 F7200.000 ; perimeter
 G1 X108.137 Y133.643 E8.08108 ; perimeter
 G1 X108.564 Y136.193 E8.15783 ; perimeter
 G1 X108.564 Y137.571 E8.19875 ; perimeter
 G1 X108.047 Y138.555 E8.23176 ; perimeter
 G1 X107.132 Y139.187 E8.26477 ; perimeter
 G1 X105.728 Y139.357 E8.30677 ; perimeter
 G1 X104.952 Y139.357 E8.32980 ; perimeter
 G1 X104.952 Y137.443 E8.38664 ; perimeter
 G1 X106.176 Y137.443 E8.42299 ; perimeter
 G1 X106.593 Y137.800 F12000.000 ; move to first perimeter point
 G1 X106.593 Y134.000 E8.53582 F7200.000 ; perimeter
 G1 X107.835 Y134.000 E8.57268 ; perimeter
 G1 X108.207 Y136.222 E8.63958 ; perimeter
 G1 X108.207 Y137.482 E8.67700 ; perimeter
 G1 X107.772 Y138.311 E8.70478 ; perimeter
 G1 X107.001 Y138.843 E8.73257 ; perimeter
 G1 X105.706 Y139.000 E8.77131 ; perimeter
 G1 X105.309 Y139.000 E8.78310 ; perimeter
 G1 X105.309 Y137.800 E8.81873 ; perimeter
 G1 X106.533 Y137.800 E8.85509 ; perimeter
 G1 X105.530 Y138.610 F12000.000 ; move to first infill point
 G1 X106.031 Y138.610 E8.88017 F7200.000 ; infill
 G1 X106.795 Y138.007 E8.92898 ; infill
 G1 X107.682 Y138.007 E8.97348 ; infill
 G1 X107.985 Y137.404 E9.00732 ; infill
 G1 X106.795 Y137.404 E9.06700 ; infill
 G1 X106.795 Y136.801 E9.09723 ; infill
 G1 X107.985 Y136.801 E9.15691 ; infill
 G1 X107.985 Y136.198 E9.18715 ; infill
 G1 X106.795 Y136.198 E9.24683 ; infill
 G1 X106.795 Y135.595 E9.27707 ; infill
 G1 X107.895 Y135.595 E9.33223 ; infill
 G1 X107.794 Y134.992 E9.36289 ; infill
 G1 X106.795 Y134.992 E9.41300 ; infill
 G1 X106.795 Y134.388 E9.44323 ; infill
 G1 X107.693 Y134.388 E9.48828 ; infill
 G1 X104.987 Y132.615 F12000.000 ; move to first infill point
 G1 X103.702 Y132.615 E9.56914 F1800.000 ; infill
 G1 F9600
 G1 X104.987 Y132.615 E9.26408 ; wipe and retract
 G1 E4.56914 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.800 F12000.000 ; lift Z
 G1 X104.430 Y102.815 F12000.000 ; move to first perimeter point
 G1 Z5.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X101.979 Y102.815 E5.07276 F7200.000 ; perimeter
 G1 X100.201 Y91.215 E5.42120 ; perimeter
 G1 X102.490 Y91.215 E5.48916 ; perimeter
 G1 X104.420 Y102.755 E5.83658 ; perimeter
 G1 X104.073 Y102.634 F12000.000 ; move inwards before travel
 G1 X104.008 Y102.458 F12000.000 ; move to first perimeter point
 G1 X102.286 Y102.458 E5.88771 F7200.000 ; perimeter
 G1 X100.617 Y91.572 E6.21470 ; perimeter
 G1 X102.188 Y91.572 E6.26133 ; perimeter
 G1 X103.998 Y102.398 E6.58725 ; perimeter
 G1 X103.586 Y102.100 F12000.000 ; move to first perimeter point
 G1 X102.593 Y102.100 E6.61677 F7200.000 ; perimeter
 G1 X101.033 Y91.929 E6.92230 ; perimeter
 G1 X101.885 Y91.929 E6.94761 ; perimeter
 G1 X103.577 Y102.041 E7.25203 ; perimeter
 G1 X103.165 Y101.743 F12000.000 ; move to first perimeter point
 G1 X102.899 Y101.743 E7.25992 F7200.000 ; perimeter
 G1 X102.350 Y98.160 E7.36755 ; perimeter
 G1 X102.560 Y98.127 E7.37387 ; perimeter
 G1 X103.155 Y101.684 E7.48096 ; perimeter
 G1 X102.427 Y97.967 F12000.000 ; move to first infill point
 G1 X101.487 Y92.107 E7.85455 F1800.000 ; infill
 G1 F9600
 G1 X102.427 Y97.967 E6.44509 ; wipe and retract
 G1 E2.85455 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.800 F12000.000 ; lift Z
 G1 X95.608 Y123.815 F12000.000 ; move to first perimeter point
 G1 Z5.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X95.608 Y132.215 E5.24941 F7200.000 ; perimeter
 G1 X100.093 Y132.215 E5.38256 ; perimeter
 G1 X100.093 Y133.015 E5.40631 ; perimeter
 G1 X98.808 Y133.015 E5.44445 ; perimeter
 G1 X98.808 Y136.015 E5.53352 ; perimeter
 G1 X100.093 Y136.015 E5.57166 ; perimeter
 G1 X100.093 Y140.785 E5.71331 ; perimeter
 G1 X93.363 Y140.785 E5.91313 ; perimeter
 G1 X91.653 Y140.137 E5.96743 ; perimeter
 G1 X90.449 Y138.778 E6.02134 ; perimeter
 G1 X90.008 Y136.991 E6.07598 ; perimeter
 G1 X90.507 Y59.215 E8.38531 ; perimeter
 G1 X96.608 Y59.215 E8.56647 ; perimeter
 G1 X96.608 Y69.215 E8.86338 ; perimeter
 G1 X98.811 Y69.215 E8.92879 ; perimeter
 G1 X101.085 Y82.815 E9.33820 ; perimeter
 G1 X98.914 Y82.815 E9.40268 ; perimeter
 G1 X97.105 Y71.015 E9.75713 ; perimeter
 G1 X92.884 Y71.015 E9.88244 ; perimeter
 G1 X92.608 Y118.036 E11.27860 ; perimeter
 G1 X92.875 Y119.220 E11.31462 ; perimeter
 G1 X93.635 Y120.155 E11.35041 ; perimeter
 G1 X94.703 Y120.597 E11.38473 ; perimeter
 G1 X101.631 Y120.597 E11.59043 ; perimeter
 G1 X102.742 Y120.450 E11.62368 ; perimeter
 G1 X103.689 Y119.737 E11.65890 ; perimeter
 G1 X104.219 Y118.635 E11.69521 ; perimeter
 G1 X104.219 Y117.425 E11.73112 ; perimeter
 G1 X103.267 Y111.215 E11.91767 ; perimeter
 G1 X105.835 Y111.215 E11.99390 ; perimeter
 G1 X107.942 Y123.815 E12.37321 ; perimeter
 G1 X95.668 Y123.815 E12.73763 ; perimeter
 G1 X95.208 Y123.815 F12000.000 ; move inwards before travel
 G1 X95.251 Y123.458 F12000.000 ; move to first perimeter point
 G1 X95.251 Y132.572 E13.00824 F7200.000 ; perimeter
 G1 X98.451 Y132.572 E13.10325 ; perimeter
 G1 X98.451 Y136.372 E13.21608 ; perimeter
 G1 X99.736 Y136.372 E13.25422 ; perimeter
 G1 X99.736 Y140.428 E13.37466 ; perimeter
 G1 X93.428 Y140.428 E13.56194 ; perimeter
 G1 X91.862 Y139.834 E13.61168 ; perimeter
 G1 X90.774 Y138.607 E13.66037 ; perimeter
 G1 X90.366 Y136.949 E13.71107 ; perimeter
 G1 X90.862 Y59.572 E16.00855 ; perimeter
 G1 X96.251 Y59.572 E16.16856 ; perimeter
 G1 X96.251 Y69.572 E16.46548 ; perimeter
 G1 X98.509 Y69.572 E16.53251 ; perimeter
 G1 X100.664 Y82.458 E16.92042 ; perimeter
 G1 X99.220 Y82.458 E16.96328 ; perimeter
 G1 X97.411 Y70.658 E17.31773 ; perimeter
 G1 X92.529 Y70.658 E17.46268 ; perimeter
 G1 X92.251 Y118.075 E18.87060 ; perimeter
 G1 X92.545 Y119.380 E18.91031 ; perimeter
 G1 X93.415 Y120.451 E18.95127 ; perimeter
 G1 X94.632 Y120.954 E18.99038 ; perimeter
 G1 X101.655 Y120.954 E19.19888 ; perimeter
 G1 X102.881 Y120.792 E19.23563 ; perimeter
 G1 X103.973 Y119.970 E19.27620 ; perimeter
 G1 X104.576 Y118.716 E19.31751 ; perimeter
 G1 X104.576 Y117.398 E19.35665 ; perimeter
 G1 X103.683 Y111.572 E19.53165 ; perimeter
 G1 X105.532 Y111.572 E19.58656 ; perimeter
 G1 X107.520 Y123.458 E19.94436 ; perimeter
 G1 X95.311 Y123.458 E20.30687 ; perimeter
 G1 X94.894 Y123.100 F12000.000 ; move to first perimeter point
 G1 X94.894 Y132.929 E20.59868 F7200.000 ; perimeter
 G1 X98.094 Y132.929 E20.69369 ; perimeter
 G1 X98.094 Y136.729 E20.80652 ; perimeter
 G1 X99.378 Y136.729 E20.84466 ; perimeter
 G1 X99.378 Y140.071 E20.94390 ; perimeter
 G1 X93.493 Y140.071 E21.11863 ; perimeter
 G1 X92.071 Y139.532 E21.16381 ; perimeter
 G1 X91.100 Y138.436 E21.20728 ; perimeter
 G1 X90.723 Y136.906 E21.25405 ; perimeter
 G1 X91.216 Y59.929 E23.53966 ; perimeter
 G1 X95.894 Y59.929 E23.67855 ; perimeter
 G1 X95.894 Y69.929 E23.97546 ; perimeter
 G1 X98.206 Y69.929 E24.04412 ; perimeter
 G1 X100.242 Y82.100 E24.41053 ; perimeter
 G1 X99.527 Y82.100 E24.43177 ; perimeter
 G1 X97.718 Y70.300 E24.78622 ; perimeter
 G1 X92.174 Y70.300 E24.95081 ; perimeter
 G1 X91.893 Y118.114 E26.37048 ; perimeter
 G1 X92.216 Y119.540 E26.41389 ; perimeter
 G1 X93.195 Y120.746 E26.46001 ; perimeter
 G1 X94.561 Y121.311 E26.50392 ; perimeter
 G1 X101.678 Y121.311 E26.71523 ; perimeter
 G1 X103.021 Y121.133 E26.75546 ; perimeter
 G1 X104.257 Y120.203 E26.80139 ; perimeter
 G1 X104.933 Y118.797 E26.84769 ; perimeter
 G1 X104.933 Y117.371 E26.89006 ; perimeter
 G1 X104.099 Y111.929 E27.05352 ; perimeter
 G1 X105.230 Y111.929 E27.08710 ; perimeter
 G1 X107.098 Y123.100 E27.42341 ; perimeter
 G1 X94.954 Y123.100 E27.78399 ; perimeter
 G1 X94.537 Y122.743 F12000.000 ; move to first perimeter point
 G1 X94.537 Y133.286 E28.09701 F7200.000 ; perimeter
 G1 X97.737 Y133.286 E28.19202 ; perimeter
 G1 X97.737 Y137.086 E28.30485 ; perimeter
 G1 X99.021 Y137.086 E28.34298 ; perimeter
 G1 X99.021 Y139.714 E28.42102 ; perimeter
 G1 X93.559 Y139.714 E28.58321 ; perimeter
 G1 X92.280 Y139.229 E28.62383 ; perimeter
 G1 X91.426 Y138.265 E28.66207 ; perimeter
 G1 X91.080 Y136.864 E28.70491 ; perimeter
 G1 X91.571 Y60.286 E30.97867 ; perimeter
 G1 X95.537 Y60.286 E31.09641 ; perimeter
 G1 X95.537 Y69.943 E31.38316 ; perimeter
 G1 X91.819 Y69.943 E31.49354 ; perimeter
 G1 X91.536 Y118.153 E32.92496 ; perimeter
 G1 X91.886 Y119.700 E32.97207 ; perimeter
 G1 X92.975 Y121.041 E33.02336 ; perimeter
 G1 X94.490 Y121.668 E33.07206 ; perimeter
 G1 X101.702 Y121.668 E33.28617 ; perimeter
 G1 X103.161 Y121.475 E33.32988 ; perimeter
 G1 X104.541 Y120.436 E33.38118 ; perimeter
 G1 X105.290 Y118.879 E33.43248 ; perimeter
 G1 X105.290 Y117.343 E33.47807 ; perimeter
 G1 X104.515 Y112.286 E33.62999 ; perimeter
 G1 X104.928 Y112.286 E33.64224 ; perimeter
 G1 X106.677 Y122.743 E33.95705 ; perimeter
 G1 X94.597 Y122.743 E34.31571 ; perimeter
 G1 F9600
 G1 X94.537 Y133.286 E31.81183 ; wipe and retract
 G1 F9600
 G1 X97.737 Y133.286 E31.05183 ; wipe and retract
 G1 F9600
 G1 X97.737 Y137.086 E30.14933 ; wipe and retract
 G1 F9600
 G1 X99.021 Y137.086 E29.84426 ; wipe and retract
 G1 F9600
 G1 X99.021 Y138.259 E29.56571 ; wipe and retract
 G1 E29.31571 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.800 F12000.000 ; lift Z
 G1 X95.180 Y69.586 F12000.000 ; move to first perimeter point
 G1 Z5.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.869 Y69.586 E5.09831 F7200.000 ; perimeter
 G1 X91.926 Y60.643 E5.36386 ; perimeter
 G1 X95.180 Y60.643 E5.46047 ; perimeter
 G1 X95.180 Y69.526 E5.72422 ; perimeter
 G1 X94.823 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.228 Y69.229 E5.80126 F7200.000 ; perimeter
 G1 X92.281 Y61.000 E6.04560 ; perimeter
 G1 X94.823 Y61.000 E6.12108 ; perimeter
 G1 X94.823 Y69.169 E6.36363 ; perimeter
 G1 F9600
 G1 X92.228 Y69.229 E5.74724 ; wipe and retract
 G1 F9600
 G1 X92.281 Y61.000 E3.79276 ; wipe and retract
 G1 F9600
 G1 X94.823 Y61.000 E3.18906 ; wipe and retract
 G1 F9600
 G1 X94.823 Y67.633 E1.61363 ; wipe and retract
 G1 E1.36363 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.800 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z5.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X98.664 Y137.443 E5.58020 ; perimeter
 G1 X98.664 Y139.357 E5.63704 ; perimeter
 G1 X93.624 Y139.357 E5.78668 ; perimeter
 G1 X92.488 Y138.926 E5.82275 ; perimeter
 G1 X91.751 Y138.094 E5.85576 ; perimeter
 G1 X91.438 Y136.822 E5.89466 ; perimeter
 G1 X91.546 Y119.849 E6.39862 ; perimeter
 G1 X92.754 Y121.337 E6.45552 ; perimeter
 G1 X94.419 Y122.025 E6.50901 ; perimeter
 G1 X101.725 Y122.025 E6.72594 ; perimeter
 G1 X103.301 Y121.817 E6.77313 ; perimeter
 G1 X104.825 Y120.669 E6.82979 ; perimeter
 G1 X105.561 Y119.141 E6.88012 ; perimeter
 G1 X105.716 Y119.163 E6.88478 ; perimeter
 G1 X106.255 Y122.386 E6.98180 ; perimeter
 G1 X94.240 Y122.386 E7.33854 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E7.34313 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E7.39155 ; perimeter
 G1 X105.394 Y120.311 E7.41103 ; perimeter
 G1 X105.549 Y120.333 E7.41569 ; perimeter
 G1 X105.833 Y122.029 E7.46676 ; perimeter
 G1 X103.916 Y122.029 E7.52369 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E7.48037 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.09301 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E6.93719 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E6.89995 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E6.49144 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.03605 ; wipe and retract
 G1 E2.52369 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.800 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z5.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X98.307 Y137.800 E5.24598 ; perimeter
 G1 X98.307 Y139.000 E5.28161 ; perimeter
 G1 X93.690 Y139.000 E5.41870 ; perimeter
 G1 X92.697 Y138.624 E5.45022 ; perimeter
 G1 X92.077 Y137.923 E5.47800 ; perimeter
 G1 X91.795 Y136.780 E5.51297 ; perimeter
 G1 X91.897 Y120.847 E5.98603 ; perimeter
 G1 X92.534 Y121.632 E6.01604 ; perimeter
 G1 X93.823 Y122.165 E6.05744 ; perimeter
 G1 X93.823 Y133.940 E6.40706 ; perimeter
 G1 X93.621 Y134.011 F12000.000 ; move to first infill point
 G1 X92.017 Y134.011 E6.48379 F7200.000 ; infill
 G1 X92.018 Y133.436 E6.51129 ; infill
 G1 X93.621 Y133.436 E6.58797 ; infill
 G1 X93.621 Y132.860 E6.61547 ; infill
 G1 X92.022 Y132.860 E6.69197 ; infill
 G1 X92.025 Y132.285 E6.71947 ; infill
 G1 X93.621 Y132.285 E6.79580 ; infill
 G1 X93.621 Y131.710 E6.82330 ; infill
 G1 X92.029 Y131.710 E6.89944 ; infill
 G1 X92.033 Y131.135 E6.92695 ; infill
 G1 X93.621 Y131.135 E7.00292 ; infill
 G1 X93.621 Y130.560 E7.03042 ; infill
 G1 X92.036 Y130.560 E7.10622 ; infill
 G1 X92.040 Y129.985 E7.13372 ; infill
 G1 X93.621 Y129.985 E7.20934 ; infill
 G1 X93.621 Y129.410 E7.23684 ; infill
 G1 X92.044 Y129.410 E7.31228 ; infill
 G1 X92.047 Y128.835 E7.33978 ; infill
 G1 X93.621 Y128.835 E7.41505 ; infill
 G1 X93.621 Y128.260 E7.44255 ; infill
 G1 X92.051 Y128.260 E7.51764 ; infill
 G1 X92.055 Y127.685 E7.54514 ; infill
 G1 X93.621 Y127.685 E7.62006 ; infill
 G1 X93.621 Y127.109 E7.64756 ; infill
 G1 X92.058 Y127.109 E7.72230 ; infill
 G1 X92.062 Y126.534 E7.74980 ; infill
 G1 X93.621 Y126.534 E7.82436 ; infill
 G1 X93.621 Y125.959 E7.85186 ; infill
 G1 X92.066 Y125.959 E7.92625 ; infill
 G1 X92.069 Y125.384 E7.95375 ; infill
 G1 X93.621 Y125.384 E8.02796 ; infill
 G1 X93.621 Y124.809 E8.05546 ; infill
 G1 X92.073 Y124.809 E8.12949 ; infill
 G1 X92.077 Y124.234 E8.15699 ; infill
 G1 X93.621 Y124.234 E8.23085 ; infill
 G1 X93.621 Y123.659 E8.25835 ; infill
 G1 X92.081 Y123.659 E8.33203 ; infill
 G1 X92.084 Y123.084 E8.35953 ; infill
 G1 X93.621 Y123.084 E8.43304 ; infill
 G1 X93.621 Y122.509 E8.46054 ; infill
 G1 X92.088 Y122.509 E8.53387 ; infill
 G1 X92.092 Y121.934 E8.56137 ; infill
 G1 X92.472 Y121.934 E8.57954 ; infill
 G1 X92.017 Y134.586 F12000.000 ; move to first infill point
 G1 X96.821 Y134.586 E8.80930 F7200.000 ; infill
 G1 X96.821 Y135.161 E8.83680 ; infill
 G1 X92.017 Y135.161 E9.06655 ; infill
 G1 X92.017 Y135.736 E9.09406 ; infill
 G1 X96.821 Y135.736 E9.32381 ; infill
 G1 X96.821 Y136.311 E9.35131 ; infill
 G1 X92.017 Y136.311 E9.58107 ; infill
 G1 X92.034 Y136.886 E9.60858 ; infill
 G1 X96.821 Y136.886 E9.83753 ; infill
 G1 X96.821 Y137.461 E9.86503 ; infill
 G1 X92.175 Y137.461 E10.08719 ; infill
 G1 X92.502 Y138.036 E10.11883 ; infill
 G1 X96.821 Y138.036 E10.32536 ; infill
 G1 X98.086 Y138.612 F12000.000 ; move to first infill point
 G1 X93.538 Y138.612 E10.54286 F7200.000 ; infill
 G1 X91.703 Y119.744 F12000.000 ; move to first infill point
 G1 X91.491 Y119.308 E10.55726 F1800.000 ; infill
 G1 X91.388 Y118.357 E10.58566 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E10.35845 ; wipe and retract
 G1 F9600
 G1 X91.703 Y119.744 E10.24330 ; wipe and retract
 G1 E5.58566 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.800 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z5.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X105.107 Y121.240 F12000.000 ; move to first infill point
 G1 X105.494 Y121.240 E5.07167 F7200.000 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.931 E5.13770 F1800.000 ; infill
 G1 X105.579 Y117.931 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.15587 F1800.000 ; infill
 G1 X104.750 Y112.464 E5.30190 ; infill
 G1 F9600
 G1 X105.528 Y117.321 E4.13382 ; wipe and retract
 G1 F9600
 G1 X105.579 Y117.931 E3.98847 ; wipe and retract
 G1 E0.30190 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.800 F12000.000 ; lift Z
 G1 X99.914 Y132.615 F12000.000 ; move to first infill point
 G1 Z5.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.630 Y132.615 E5.08086 F1800.000 ; infill
 G1 F9600
 G1 X99.914 Y132.615 E4.77579 ; wipe and retract
 G1 E0.08086 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.800 F12000.000 ; lift Z
 G1 X99.855 Y81.922 F12000.000 ; move to first infill point
 G1 Z5.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.594 Y74.053 E5.50170 F1800.000 ; infill
 G1 X97.962 Y70.107 E5.62034 F1800.000 ; infill
 G1 X94.601 Y68.841 F12000.000 ; move to first infill point
 G1 X92.452 Y68.841 E5.72279 F7200.000 ; infill
 G1 X92.452 Y68.267 E5.75011 ; infill
 G1 X94.601 Y68.267 E5.85257 ; infill
 G1 X94.601 Y67.694 E5.87989 ; infill
 G1 X92.452 Y67.694 E5.98234 ; infill
 G1 X92.452 Y67.121 E6.00967 ; infill
 G1 X94.601 Y67.121 E6.11212 ; infill
 G1 X94.601 Y66.548 E6.13944 ; infill
 G1 X92.452 Y66.548 E6.24189 ; infill
 G1 X92.452 Y65.974 E6.26922 ; infill
 G1 X94.601 Y65.974 E6.37167 ; infill
 G1 X94.601 Y65.401 E6.39899 ; infill
 G1 X92.454 Y65.401 E6.50135 ; infill
 G1 X92.458 Y64.828 E6.52867 ; infill
 G1 X94.601 Y64.828 E6.63085 ; infill
 G1 X94.601 Y64.255 E6.65818 ; infill
 G1 X92.461 Y64.255 E6.76018 ; infill
 G1 X92.465 Y63.681 E6.78750 ; infill
 G1 X94.601 Y63.681 E6.88933 ; infill
 G1 X94.601 Y63.108 E6.91666 ; infill
 G1 X92.469 Y63.108 E7.01831 ; infill
 G1 X92.472 Y62.535 E7.04564 ; infill
 G1 X94.601 Y62.535 E7.14711 ; infill
 G1 X94.601 Y61.962 E7.17444 ; infill
 G1 X92.476 Y61.962 E7.27574 ; infill
 G1 X92.480 Y61.388 E7.30307 ; infill
 G1 X94.601 Y61.388 E7.40419 ; infill
 G1 F9600
 G1 X92.480 Y61.388 E6.90031 ; wipe and retract
 G1 F9600
 G1 X92.476 Y61.962 E6.76416 ; wipe and retract
 G1 F9600
 G1 X94.601 Y61.962 E6.25941 ; wipe and retract
 G1 F9600
 G1 X94.601 Y62.535 E6.12326 ; wipe and retract
 G1 F9600
 G1 X92.472 Y62.535 E5.61763 ; wipe and retract
 G1 F9600
 G1 X92.469 Y63.108 E5.48148 ; wipe and retract
 G1 F9600
 G1 X94.601 Y63.108 E4.97498 ; wipe and retract
 G1 F9600
 G1 X94.601 Y63.681 E4.83884 ; wipe and retract
 G1 F9600
 G1 X92.465 Y63.681 E4.33146 ; wipe and retract
 G1 F9600
 G1 X92.461 Y64.255 E4.19531 ; wipe and retract
 G1 F9600
 G1 X94.601 Y64.255 E3.68707 ; wipe and retract
 G1 F9600
 G1 X94.601 Y64.828 E3.55092 ; wipe and retract
 G1 F9600
 G1 X92.458 Y64.828 E3.04180 ; wipe and retract
 G1 F9600
 G1 X92.454 Y65.401 E2.90565 ; wipe and retract
 G1 F9600
 G1 X93.513 Y65.401 E2.65419 ; wipe and retract
 G1 E2.40419 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.800 F12000.000 ; lift Z
 G1 Z5.800 F12000.000 ; move to next layer (49)
 G1 Z6.800 F12000.000 ; lift Z
 G1 X100.065 Y86.329 F12000.000 ; move to first support material point
 G1 Z5.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X101.225 Y84.450 E5.14750 F1680.000 ; support material
 G1 X100.570 Y84.450 E5.19124 ; support material
 G1 X99.505 Y86.177 E5.32678 ; support material
 G1 X99.528 Y86.329 E5.33708 ; support material
 G1 X100.065 Y86.329 E5.37297 ; support material
 G1 X102.230 Y86.865 F12000.000 ; move to first support material point
 G1 X101.737 Y83.915 E5.57278 F1680.000 ; support material
 G1 X98.616 Y83.915 E5.78125 ; support material
 G1 X99.068 Y86.865 E5.98062 ; support material
 G1 X102.230 Y86.865 E6.19184 ; support material
 G1 F9600
 G1 X99.068 Y86.865 E5.44096 ; wipe and retract
 G1 F9600
 G1 X98.616 Y83.915 E4.73215 ; wipe and retract
 G1 F9600
 G1 X101.737 Y83.915 E3.99103 ; wipe and retract
 G1 F9600
 G1 X102.230 Y86.865 E3.28068 ; wipe and retract
 G1 E1.19184 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.800 F12000.000 ; lift Z
 G1 X102.773 Y90.115 F12000.000 ; move to first support material point
 G1 Z5.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X102.631 Y89.265 E5.05757 F1680.000 ; support material
 G1 X99.436 Y89.265 E5.27102 ; support material
 G1 X99.566 Y90.115 E5.32847 ; support material
 G1 X102.773 Y90.115 E5.54270 ; support material
 G1 F9600
 G1 X99.566 Y90.115 E4.78107 ; wipe and retract
 G1 F9600
 G1 X99.436 Y89.265 E4.57684 ; wipe and retract
 G1 F9600
 G1 X102.631 Y89.265 E3.81801 ; wipe and retract
 G1 F9600
 G1 X102.773 Y90.115 E3.61333 ; wipe and retract
 G1 E0.54270 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z6.800 F12000.000 ; lift Z
 G1 X104.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z6.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.524 Y133.015 E5.03814 F7200.000 ; perimeter
 G1 X103.524 Y132.215 E5.06189 ; perimeter
 G1 X109.346 Y132.215 E5.23478 ; perimeter
 G1 X109.992 Y136.074 E5.35096 ; perimeter
 G1 X109.992 Y137.923 E5.40585 ; perimeter
 G1 X109.148 Y139.531 E5.45977 ; perimeter
 G1 X107.653 Y140.562 E5.51368 ; perimeter
 G1 X105.814 Y140.785 E5.56870 ; perimeter
 G1 X103.524 Y140.785 E5.63671 ; perimeter
 G1 X103.524 Y136.015 E5.77836 ; perimeter
 G1 X104.808 Y136.015 E5.81650 ; perimeter
 G1 X104.808 Y133.075 E5.90379 ; perimeter
 G1 X104.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X105.165 Y136.372 F12000.000 ; move to first perimeter point
 G1 X105.165 Y132.572 E6.01661 F7200.000 ; perimeter
 G1 X109.044 Y132.572 E6.13179 ; perimeter
 G1 X109.635 Y136.104 E6.23811 ; perimeter
 G1 X109.635 Y137.835 E6.28951 ; perimeter
 G1 X108.873 Y139.287 E6.33820 ; perimeter
 G1 X107.523 Y140.218 E6.38689 ; perimeter
 G1 X105.792 Y140.428 E6.43865 ; perimeter
 G1 X103.881 Y140.428 E6.49541 ; perimeter
 G1 X103.881 Y136.372 E6.61586 ; perimeter
 G1 X105.105 Y136.372 E6.65222 ; perimeter
 G1 X105.522 Y136.729 F12000.000 ; move to first perimeter point
 G1 X105.522 Y132.929 E6.76504 F7200.000 ; perimeter
 G1 X108.742 Y132.929 E6.86064 ; perimeter
 G1 X109.278 Y136.133 E6.95710 ; perimeter
 G1 X109.278 Y137.747 E7.00500 ; perimeter
 G1 X108.597 Y139.043 E7.04847 ; perimeter
 G1 X107.393 Y139.874 E7.09193 ; perimeter
 G1 X105.771 Y140.071 E7.14044 ; perimeter
 G1 X104.238 Y140.071 E7.18596 ; perimeter
 G1 X104.238 Y136.729 E7.28520 ; perimeter
 G1 X105.462 Y136.729 E7.32156 ; perimeter
 G1 X105.879 Y137.086 F12000.000 ; move to first perimeter point
 G1 X105.879 Y133.286 E7.43439 F7200.000 ; perimeter
 G1 X108.440 Y133.286 E7.51040 ; perimeter
 G1 X108.921 Y136.163 E7.59701 ; perimeter
 G1 X108.921 Y137.659 E7.64142 ; perimeter
 G1 X108.322 Y138.799 E7.67966 ; perimeter
 G1 X107.262 Y139.530 E7.71790 ; perimeter
 G1 X105.749 Y139.714 E7.76315 ; perimeter
 G1 X104.595 Y139.714 E7.79742 ; perimeter
 G1 X104.595 Y137.086 E7.87546 ; perimeter
 G1 X105.819 Y137.086 E7.91182 ; perimeter
 G1 X106.236 Y137.443 F12000.000 ; move to first perimeter point
 G1 X106.236 Y133.643 E8.02465 F7200.000 ; perimeter
 G1 X108.137 Y133.643 E8.08108 ; perimeter
 G1 X108.564 Y136.193 E8.15783 ; perimeter
 G1 X108.564 Y137.571 E8.19875 ; perimeter
 G1 X108.047 Y138.555 E8.23176 ; perimeter
 G1 X107.132 Y139.187 E8.26477 ; perimeter
 G1 X105.728 Y139.357 E8.30677 ; perimeter
 G1 X104.952 Y139.357 E8.32980 ; perimeter
 G1 X104.952 Y137.443 E8.38664 ; perimeter
 G1 X106.176 Y137.443 E8.42299 ; perimeter
 G1 X106.593 Y137.800 F12000.000 ; move to first perimeter point
 G1 X106.593 Y134.000 E8.53582 F7200.000 ; perimeter
 G1 X107.835 Y134.000 E8.57268 ; perimeter
 G1 X108.207 Y136.222 E8.63958 ; perimeter
 G1 X108.207 Y137.482 E8.67700 ; perimeter
 G1 X107.772 Y138.311 E8.70478 ; perimeter
 G1 X107.001 Y138.843 E8.73257 ; perimeter
 G1 X105.706 Y139.000 E8.77131 ; perimeter
 G1 X105.309 Y139.000 E8.78310 ; perimeter
 G1 X105.309 Y137.800 E8.81873 ; perimeter
 G1 X106.533 Y137.800 E8.85509 ; perimeter
 G1 X105.697 Y138.777 F12000.000 ; move to first infill point
 G1 X105.697 Y138.001 E8.90066 F7200.000 ; infill
 G1 X106.404 Y138.001 E8.94220 ; infill
 G1 X106.404 Y138.711 E8.98392 ; infill
 G1 X107.111 Y138.486 E9.02751 ; infill
 G1 X107.111 Y134.221 E9.27818 ; infill
 G1 X107.818 Y135.966 F12000.000 ; move to first infill point
 G1 X107.818 Y137.597 E9.37403 F7200.000 ; infill
 G1 X104.987 Y132.615 F12000.000 ; move to first infill point
 G1 X103.702 Y132.615 E9.45489 F1800.000 ; infill
 G1 F9600
 G1 X104.987 Y132.615 E9.14982 ; wipe and retract
 G1 E4.45489 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.000 F12000.000 ; lift Z
 G1 X104.430 Y102.815 F12000.000 ; move to first perimeter point
 G1 Z6.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X101.979 Y102.815 E5.07276 F7200.000 ; perimeter
 G1 X100.201 Y91.215 E5.42120 ; perimeter
 G1 X102.490 Y91.215 E5.48916 ; perimeter
 G1 X104.420 Y102.755 E5.83658 ; perimeter
 G1 X104.073 Y102.634 F12000.000 ; move inwards before travel
 G1 X104.008 Y102.458 F12000.000 ; move to first perimeter point
 G1 X102.286 Y102.458 E5.88771 F7200.000 ; perimeter
 G1 X100.617 Y91.572 E6.21470 ; perimeter
 G1 X102.188 Y91.572 E6.26133 ; perimeter
 G1 X103.998 Y102.398 E6.58725 ; perimeter
 G1 X103.586 Y102.100 F12000.000 ; move to first perimeter point
 G1 X102.593 Y102.100 E6.61677 F7200.000 ; perimeter
 G1 X101.033 Y91.929 E6.92230 ; perimeter
 G1 X101.885 Y91.929 E6.94761 ; perimeter
 G1 X103.577 Y102.041 E7.25203 ; perimeter
 G1 X103.165 Y101.743 F12000.000 ; move to first perimeter point
 G1 X102.899 Y101.743 E7.25992 F7200.000 ; perimeter
 G1 X102.350 Y98.160 E7.36755 ; perimeter
 G1 X102.560 Y98.127 E7.37387 ; perimeter
 G1 X103.155 Y101.684 E7.48096 ; perimeter
 G1 X102.427 Y97.967 F12000.000 ; move to first infill point
 G1 X101.487 Y92.107 E7.85455 F1800.000 ; infill
 G1 F9600
 G1 X102.427 Y97.967 E6.44509 ; wipe and retract
 G1 E2.85455 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.000 F12000.000 ; lift Z
 G1 X95.608 Y123.815 F12000.000 ; move to first perimeter point
 G1 Z6.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X95.608 Y132.215 E5.24941 F7200.000 ; perimeter
 G1 X100.093 Y132.215 E5.38256 ; perimeter
 G1 X100.093 Y133.015 E5.40631 ; perimeter
 G1 X98.808 Y133.015 E5.44445 ; perimeter
 G1 X98.808 Y136.015 E5.53352 ; perimeter
 G1 X100.093 Y136.015 E5.57166 ; perimeter
 G1 X100.093 Y140.785 E5.71331 ; perimeter
 G1 X93.363 Y140.785 E5.91313 ; perimeter
 G1 X91.653 Y140.137 E5.96743 ; perimeter
 G1 X90.449 Y138.778 E6.02134 ; perimeter
 G1 X90.008 Y136.991 E6.07598 ; perimeter
 G1 X90.507 Y59.215 E8.38531 ; perimeter
 G1 X96.608 Y59.215 E8.56647 ; perimeter
 G1 X96.608 Y69.215 E8.86338 ; perimeter
 G1 X98.811 Y69.215 E8.92879 ; perimeter
 G1 X101.085 Y82.815 E9.33820 ; perimeter
 G1 X98.914 Y82.815 E9.40268 ; perimeter
 G1 X97.105 Y71.015 E9.75713 ; perimeter
 G1 X92.884 Y71.015 E9.88244 ; perimeter
 G1 X92.608 Y118.036 E11.27860 ; perimeter
 G1 X92.875 Y119.220 E11.31462 ; perimeter
 G1 X93.635 Y120.155 E11.35041 ; perimeter
 G1 X94.703 Y120.597 E11.38473 ; perimeter
 G1 X101.631 Y120.597 E11.59043 ; perimeter
 G1 X102.742 Y120.450 E11.62368 ; perimeter
 G1 X103.689 Y119.737 E11.65890 ; perimeter
 G1 X104.219 Y118.635 E11.69521 ; perimeter
 G1 X104.219 Y117.425 E11.73112 ; perimeter
 G1 X103.267 Y111.215 E11.91767 ; perimeter
 G1 X105.835 Y111.215 E11.99390 ; perimeter
 G1 X107.942 Y123.815 E12.37321 ; perimeter
 G1 X95.668 Y123.815 E12.73763 ; perimeter
 G1 X95.208 Y123.815 F12000.000 ; move inwards before travel
 G1 X95.251 Y123.458 F12000.000 ; move to first perimeter point
 G1 X95.251 Y132.572 E13.00824 F7200.000 ; perimeter
 G1 X98.451 Y132.572 E13.10325 ; perimeter
 G1 X98.451 Y136.372 E13.21608 ; perimeter
 G1 X99.736 Y136.372 E13.25422 ; perimeter
 G1 X99.736 Y140.428 E13.37466 ; perimeter
 G1 X93.428 Y140.428 E13.56194 ; perimeter
 G1 X91.862 Y139.834 E13.61168 ; perimeter
 G1 X90.774 Y138.607 E13.66037 ; perimeter
 G1 X90.366 Y136.949 E13.71107 ; perimeter
 G1 X90.862 Y59.572 E16.00855 ; perimeter
 G1 X96.251 Y59.572 E16.16856 ; perimeter
 G1 X96.251 Y69.572 E16.46548 ; perimeter
 G1 X98.509 Y69.572 E16.53251 ; perimeter
 G1 X100.664 Y82.458 E16.92042 ; perimeter
 G1 X99.220 Y82.458 E16.96328 ; perimeter
 G1 X97.411 Y70.658 E17.31773 ; perimeter
 G1 X92.529 Y70.658 E17.46268 ; perimeter
 G1 X92.251 Y118.075 E18.87060 ; perimeter
 G1 X92.545 Y119.380 E18.91031 ; perimeter
 G1 X93.415 Y120.451 E18.95127 ; perimeter
 G1 X94.632 Y120.954 E18.99038 ; perimeter
 G1 X101.655 Y120.954 E19.19889 ; perimeter
 G1 X102.881 Y120.792 E19.23563 ; perimeter
 G1 X103.973 Y119.970 E19.27620 ; perimeter
 G1 X104.576 Y118.716 E19.31751 ; perimeter
 G1 X104.576 Y117.398 E19.35665 ; perimeter
 G1 X103.683 Y111.572 E19.53165 ; perimeter
 G1 X105.532 Y111.572 E19.58656 ; perimeter
 G1 X107.520 Y123.458 E19.94436 ; perimeter
 G1 X95.311 Y123.458 E20.30687 ; perimeter
 G1 X94.894 Y123.100 F12000.000 ; move to first perimeter point
 G1 X94.894 Y132.929 E20.59868 F7200.000 ; perimeter
 G1 X98.094 Y132.929 E20.69369 ; perimeter
 G1 X98.094 Y136.729 E20.80652 ; perimeter
 G1 X99.378 Y136.729 E20.84466 ; perimeter
 G1 X99.378 Y140.071 E20.94390 ; perimeter
 G1 X93.493 Y140.071 E21.11863 ; perimeter
 G1 X92.071 Y139.532 E21.16381 ; perimeter
 G1 X91.100 Y138.436 E21.20728 ; perimeter
 G1 X90.723 Y136.906 E21.25405 ; perimeter
 G1 X91.216 Y59.929 E23.53966 ; perimeter
 G1 X95.894 Y59.929 E23.67855 ; perimeter
 G1 X95.894 Y69.929 E23.97546 ; perimeter
 G1 X98.206 Y69.929 E24.04412 ; perimeter
 G1 X100.242 Y82.100 E24.41053 ; perimeter
 G1 X99.527 Y82.100 E24.43177 ; perimeter
 G1 X97.718 Y70.300 E24.78622 ; perimeter
 G1 X92.174 Y70.300 E24.95081 ; perimeter
 G1 X91.893 Y118.114 E26.37048 ; perimeter
 G1 X92.216 Y119.540 E26.41389 ; perimeter
 G1 X93.195 Y120.746 E26.46001 ; perimeter
 G1 X94.561 Y121.311 E26.50392 ; perimeter
 G1 X101.678 Y121.311 E26.71523 ; perimeter
 G1 X103.021 Y121.133 E26.75546 ; perimeter
 G1 X104.257 Y120.203 E26.80139 ; perimeter
 G1 X104.933 Y118.797 E26.84769 ; perimeter
 G1 X104.933 Y117.371 E26.89006 ; perimeter
 G1 X104.099 Y111.929 E27.05352 ; perimeter
 G1 X105.230 Y111.929 E27.08710 ; perimeter
 G1 X107.098 Y123.100 E27.42341 ; perimeter
 G1 X94.954 Y123.100 E27.78399 ; perimeter
 G1 X94.537 Y122.743 F12000.000 ; move to first perimeter point
 G1 X94.537 Y133.286 E28.09701 F7200.000 ; perimeter
 G1 X97.737 Y133.286 E28.19202 ; perimeter
 G1 X97.737 Y137.086 E28.30485 ; perimeter
 G1 X99.021 Y137.086 E28.34298 ; perimeter
 G1 X99.021 Y139.714 E28.42102 ; perimeter
 G1 X93.559 Y139.714 E28.58321 ; perimeter
 G1 X92.280 Y139.229 E28.62384 ; perimeter
 G1 X91.426 Y138.265 E28.66207 ; perimeter
 G1 X91.080 Y136.864 E28.70491 ; perimeter
 G1 X91.571 Y60.286 E30.97867 ; perimeter
 G1 X95.537 Y60.286 E31.09641 ; perimeter
 G1 X95.537 Y69.943 E31.38316 ; perimeter
 G1 X91.819 Y69.943 E31.49354 ; perimeter
 G1 X91.536 Y118.153 E32.92496 ; perimeter
 G1 X91.886 Y119.700 E32.97207 ; perimeter
 G1 X92.975 Y121.041 E33.02336 ; perimeter
 G1 X94.490 Y121.668 E33.07206 ; perimeter
 G1 X101.702 Y121.668 E33.28618 ; perimeter
 G1 X103.161 Y121.475 E33.32988 ; perimeter
 G1 X104.541 Y120.436 E33.38118 ; perimeter
 G1 X105.290 Y118.879 E33.43248 ; perimeter
 G1 X105.290 Y117.343 E33.47807 ; perimeter
 G1 X104.515 Y112.286 E33.62999 ; perimeter
 G1 X104.928 Y112.286 E33.64224 ; perimeter
 G1 X106.677 Y122.743 E33.95705 ; perimeter
 G1 X94.597 Y122.743 E34.31571 ; perimeter
 G1 F9600
 G1 X94.537 Y133.286 E31.81183 ; wipe and retract
 G1 F9600
 G1 X97.737 Y133.286 E31.05183 ; wipe and retract
 G1 F9600
 G1 X97.737 Y137.086 E30.14933 ; wipe and retract
 G1 F9600
 G1 X99.021 Y137.086 E29.84426 ; wipe and retract
 G1 F9600
 G1 X99.021 Y138.259 E29.56571 ; wipe and retract
 G1 E29.31571 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.000 F12000.000 ; lift Z
 G1 X95.180 Y69.586 F12000.000 ; move to first perimeter point
 G1 Z6.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.869 Y69.586 E5.09831 F7200.000 ; perimeter
 G1 X91.926 Y60.643 E5.36386 ; perimeter
 G1 X95.180 Y60.643 E5.46047 ; perimeter
 G1 X95.180 Y69.526 E5.72422 ; perimeter
 G1 X94.823 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.228 Y69.229 E5.80126 F7200.000 ; perimeter
 G1 X92.281 Y61.000 E6.04560 ; perimeter
 G1 X94.823 Y61.000 E6.12108 ; perimeter
 G1 X94.823 Y69.169 E6.36363 ; perimeter
 G1 F9600
 G1 X92.228 Y69.229 E5.74724 ; wipe and retract
 G1 F9600
 G1 X92.281 Y61.000 E3.79276 ; wipe and retract
 G1 F9600
 G1 X94.823 Y61.000 E3.18906 ; wipe and retract
 G1 F9600
 G1 X94.823 Y67.633 E1.61363 ; wipe and retract
 G1 E1.36363 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.000 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z6.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X98.664 Y137.443 E5.58020 ; perimeter
 G1 X98.664 Y139.357 E5.63704 ; perimeter
 G1 X93.624 Y139.357 E5.78668 ; perimeter
 G1 X92.488 Y138.926 E5.82275 ; perimeter
 G1 X91.751 Y138.094 E5.85576 ; perimeter
 G1 X91.438 Y136.822 E5.89466 ; perimeter
 G1 X91.546 Y119.849 E6.39862 ; perimeter
 G1 X92.754 Y121.337 E6.45552 ; perimeter
 G1 X94.419 Y122.025 E6.50901 ; perimeter
 G1 X101.725 Y122.025 E6.72594 ; perimeter
 G1 X103.301 Y121.817 E6.77313 ; perimeter
 G1 X104.825 Y120.669 E6.82979 ; perimeter
 G1 X105.561 Y119.141 E6.88012 ; perimeter
 G1 X105.716 Y119.163 E6.88478 ; perimeter
 G1 X106.255 Y122.386 E6.98180 ; perimeter
 G1 X94.240 Y122.386 E7.33854 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E7.34313 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E7.39155 ; perimeter
 G1 X105.394 Y120.311 E7.41103 ; perimeter
 G1 X105.549 Y120.333 E7.41569 ; perimeter
 G1 X105.833 Y122.029 E7.46676 ; perimeter
 G1 X103.916 Y122.029 E7.52369 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E7.48037 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.09301 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E6.93719 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E6.89995 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E6.49144 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.03605 ; wipe and retract
 G1 E2.52369 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.000 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z6.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X98.307 Y137.800 E5.24598 ; perimeter
 G1 X98.307 Y139.000 E5.28161 ; perimeter
 G1 X93.690 Y139.000 E5.41870 ; perimeter
 G1 X92.697 Y138.624 E5.45022 ; perimeter
 G1 X92.077 Y137.923 E5.47800 ; perimeter
 G1 X91.795 Y136.780 E5.51297 ; perimeter
 G1 X91.897 Y120.847 E5.98603 ; perimeter
 G1 X92.534 Y121.632 E6.01604 ; perimeter
 G1 X93.823 Y122.165 E6.05744 ; perimeter
 G1 X93.823 Y133.940 E6.40706 ; perimeter
 G1 X93.904 Y134.201 F12000.000 ; move to first infill point
 G1 X93.904 Y138.779 E6.62532 F7200.000 ; infill
 G1 X94.478 Y138.779 E6.65267 ; infill
 G1 X94.478 Y134.201 E6.87094 ; infill
 G1 X95.051 Y134.201 E6.89829 ; infill
 G1 X95.051 Y138.779 E7.11655 ; infill
 G1 X95.625 Y138.779 E7.14390 ; infill
 G1 X95.625 Y134.201 E7.36217 ; infill
 G1 X96.198 Y134.201 E7.38952 ; infill
 G1 X96.198 Y138.779 E7.60778 ; infill
 G1 X96.772 Y138.001 E7.65384 ; infill
 G1 X96.772 Y138.779 E7.69091 ; infill
 G1 X97.345 Y138.779 E7.71825 ; infill
 G1 X97.345 Y138.001 E7.75532 ; infill
 G1 X97.919 Y138.001 E7.78266 ; infill
 G1 X97.919 Y138.779 E7.81973 ; infill
 G1 X93.331 Y138.637 F12000.000 ; move to first infill point
 G1 X93.331 Y122.193 E8.60385 F7200.000 ; infill
 G1 X92.757 Y121.956 E8.63345 ; infill
 G1 X92.757 Y138.303 E9.41295 ; infill
 G1 X92.184 Y136.985 F12000.000 ; move to first infill point
 G1 X92.184 Y133.448 E9.58160 F7200.000 ; infill
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X99.914 Y132.615 E9.66246 F1800.000 ; infill
 G1 F9600
 G1 X98.630 Y132.615 E9.35739 ; wipe and retract
 G1 E4.66246 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.000 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z6.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X104.774 Y121.808 F12000.000 ; move to first infill point
 G1 X104.774 Y121.449 E5.07163 F7200.000 ; infill
 G1 X105.374 Y121.352 E5.10194 ; infill
 G1 X105.374 Y121.808 E5.12466 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.931 E5.19069 F1800.000 ; infill
 G1 X105.579 Y117.931 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.20886 F1800.000 ; infill
 G1 X104.750 Y112.464 E5.35489 ; infill
 G1 F9600
 G1 X105.528 Y117.321 E4.18681 ; wipe and retract
 G1 F9600
 G1 X105.579 Y117.931 E4.04146 ; wipe and retract
 G1 E0.35489 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.000 F12000.000 ; lift Z
 G1 X91.388 Y118.357 F12000.000 ; move to first infill point
 G1 Z6.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.491 Y119.308 E5.02840 F1800.000 ; infill
 G1 X91.703 Y119.744 E5.04280 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E4.92765 ; wipe and retract
 G1 F9600
 G1 X91.388 Y118.357 E4.70044 ; wipe and retract
 G1 E0.04280 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.000 F12000.000 ; lift Z
 G1 X99.855 Y81.922 F12000.000 ; move to first infill point
 G1 Z6.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.594 Y74.053 E5.50170 F1800.000 ; infill
 G1 X98.594 Y74.053 F12000.000 ; move to first infill point
 G1 X97.962 Y70.107 E5.62034 F1800.000 ; infill
 G1 X94.434 Y69.008 F12000.000 ; move to first infill point
 G1 X94.434 Y61.221 E6.01207 F7200.000 ; infill
 G1 X93.829 Y61.221 E6.04251 ; infill
 G1 X93.829 Y69.008 E6.43424 ; infill
 G1 X93.224 Y69.008 E6.46468 ; infill
 G1 X93.224 Y61.221 E6.85642 ; infill
 G1 X92.619 Y65.554 F12000.000 ; move to first infill point
 G1 X92.619 Y69.008 E7.03018 F7200.000 ; infill
 G1 F9600
 G1 X92.619 Y65.554 E6.20988 ; wipe and retract
 G1 E2.03018 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.000 F12000.000 ; lift Z
 G1 X99.880 Y86.629 F12000.000 ; move to first support material point
 G1 Z6.100 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X101.225 Y84.450 E5.17106 F1680.000 ; support material
 G1 X100.570 Y84.450 E5.21479 ; support material
 G1 X99.505 Y86.177 E5.35033 ; support material
 G1 X99.574 Y86.629 E5.38091 ; support material
 G1 X99.880 Y86.629 E5.40135 ; support material
 G1 X102.280 Y87.165 F12000.000 ; move to first support material point
 G1 X101.737 Y83.915 E5.62148 F1680.000 ; support material
 G1 X98.616 Y83.915 E5.82995 ; support material
 G1 X99.114 Y87.165 E6.04960 ; support material
 G1 X102.280 Y87.165 E6.26109 ; support material
 G1 F9600
 G1 X99.114 Y87.165 E5.50922 ; wipe and retract
 G1 F9600
 G1 X98.616 Y83.915 E4.72833 ; wipe and retract
 G1 F9600
 G1 X101.737 Y83.915 E3.98721 ; wipe and retract
 G1 F9600
 G1 X102.280 Y87.165 E3.20462 ; wipe and retract
 G1 E1.26109 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.100 F12000.000 ; lift Z
 G1 X102.773 Y90.115 F12000.000 ; move to first support material point
 G1 Z6.100 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X102.631 Y89.265 E5.05757 F1680.000 ; support material
 G1 X99.436 Y89.265 E5.27102 ; support material
 G1 X99.566 Y90.115 E5.32847 ; support material
 G1 X102.773 Y90.115 E5.54270 ; support material
 M106 S242.25 ; enable fan
 G1 F9600
 G1 X99.566 Y90.115 E4.78107 ; wipe and retract
 G1 F9600
 G1 X99.436 Y89.265 E4.57684 ; wipe and retract
 G1 F9600
 G1 X102.631 Y89.265 E3.81801 ; wipe and retract
 G1 F9600
 G1 X102.773 Y90.115 E3.61333 ; wipe and retract
 G1 E0.54270 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.100 F12000.000 ; lift Z
 G1 X104.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z6.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.524 Y133.015 E5.03814 F7200.000 ; perimeter
 G1 X103.524 Y132.215 E5.06189 ; perimeter
 G1 X109.346 Y132.215 E5.23478 ; perimeter
 G1 X109.992 Y136.074 E5.35096 ; perimeter
 G1 X109.992 Y137.923 E5.40585 ; perimeter
 G1 X109.148 Y139.531 E5.45977 ; perimeter
 G1 X107.653 Y140.562 E5.51368 ; perimeter
 G1 X105.814 Y140.785 E5.56870 ; perimeter
 G1 X103.524 Y140.785 E5.63671 ; perimeter
 G1 X103.524 Y136.015 E5.77836 ; perimeter
 G1 X104.808 Y136.015 E5.81650 ; perimeter
 G1 X104.808 Y133.075 E5.90379 ; perimeter
 G1 X104.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X105.165 Y136.372 F12000.000 ; move to first perimeter point
 G1 X105.165 Y132.572 E6.01661 F7200.000 ; perimeter
 G1 X109.044 Y132.572 E6.13179 ; perimeter
 G1 X109.635 Y136.104 E6.23811 ; perimeter
 G1 X109.635 Y137.835 E6.28951 ; perimeter
 G1 X108.873 Y139.287 E6.33820 ; perimeter
 G1 X107.523 Y140.218 E6.38689 ; perimeter
 G1 X105.792 Y140.428 E6.43865 ; perimeter
 G1 X103.881 Y140.428 E6.49541 ; perimeter
 G1 X103.881 Y136.372 E6.61586 ; perimeter
 G1 X105.105 Y136.372 E6.65222 ; perimeter
 G1 X105.522 Y136.729 F12000.000 ; move to first perimeter point
 G1 X105.522 Y132.929 E6.76504 F7200.000 ; perimeter
 G1 X108.742 Y132.929 E6.86064 ; perimeter
 G1 X109.278 Y136.133 E6.95710 ; perimeter
 G1 X109.278 Y137.747 E7.00500 ; perimeter
 G1 X108.597 Y139.043 E7.04847 ; perimeter
 G1 X107.393 Y139.874 E7.09193 ; perimeter
 G1 X105.771 Y140.071 E7.14044 ; perimeter
 G1 X104.238 Y140.071 E7.18596 ; perimeter
 G1 X104.238 Y136.729 E7.28520 ; perimeter
 G1 X105.462 Y136.729 E7.32156 ; perimeter
 G1 X105.879 Y137.086 F12000.000 ; move to first perimeter point
 G1 X105.879 Y133.286 E7.43439 F7200.000 ; perimeter
 G1 X108.440 Y133.286 E7.51040 ; perimeter
 G1 X108.921 Y136.163 E7.59701 ; perimeter
 G1 X108.921 Y137.659 E7.64142 ; perimeter
 G1 X108.322 Y138.799 E7.67966 ; perimeter
 G1 X107.262 Y139.530 E7.71790 ; perimeter
 G1 X105.749 Y139.714 E7.76315 ; perimeter
 G1 X104.595 Y139.714 E7.79742 ; perimeter
 G1 X104.595 Y137.086 E7.87546 ; perimeter
 G1 X105.819 Y137.086 E7.91182 ; perimeter
 G1 X106.236 Y137.443 F12000.000 ; move to first perimeter point
 G1 X106.236 Y133.643 E8.02465 F7200.000 ; perimeter
 G1 X108.137 Y133.643 E8.08108 ; perimeter
 G1 X108.564 Y136.193 E8.15783 ; perimeter
 G1 X108.564 Y137.571 E8.19875 ; perimeter
 G1 X108.047 Y138.555 E8.23176 ; perimeter
 G1 X107.132 Y139.187 E8.26477 ; perimeter
 G1 X105.728 Y139.357 E8.30677 ; perimeter
 G1 X104.952 Y139.357 E8.32980 ; perimeter
 G1 X104.952 Y137.443 E8.38664 ; perimeter
 G1 X106.176 Y137.443 E8.42299 ; perimeter
 G1 X106.593 Y137.800 F12000.000 ; move to first perimeter point
 G1 X106.593 Y134.000 E8.53582 F7200.000 ; perimeter
 G1 X107.835 Y134.000 E8.57268 ; perimeter
 G1 X108.207 Y136.222 E8.63958 ; perimeter
 G1 X108.207 Y137.482 E8.67700 ; perimeter
 G1 X107.772 Y138.311 E8.70478 ; perimeter
 G1 X107.001 Y138.843 E8.73257 ; perimeter
 G1 X105.706 Y139.000 E8.77131 ; perimeter
 G1 X105.309 Y139.000 E8.78310 ; perimeter
 G1 X105.309 Y137.800 E8.81873 ; perimeter
 G1 X106.533 Y137.800 E8.85509 ; perimeter
 G1 X105.530 Y138.610 F12000.000 ; move to first infill point
 G1 X106.031 Y138.610 E8.88017 F7200.000 ; infill
 G1 X106.795 Y138.007 E8.92898 ; infill
 G1 X107.682 Y138.007 E8.97348 ; infill
 G1 X107.985 Y137.404 E9.00732 ; infill
 G1 X106.795 Y137.404 E9.06700 ; infill
 G1 X106.795 Y136.801 E9.09723 ; infill
 G1 X107.985 Y136.801 E9.15691 ; infill
 G1 X107.985 Y136.198 E9.18715 ; infill
 G1 X106.795 Y136.198 E9.24683 ; infill
 G1 X106.795 Y135.595 E9.27707 ; infill
 G1 X107.895 Y135.595 E9.33223 ; infill
 G1 X107.794 Y134.992 E9.36289 ; infill
 G1 X106.795 Y134.992 E9.41300 ; infill
 G1 X106.795 Y134.388 E9.44323 ; infill
 G1 X107.693 Y134.388 E9.48828 ; infill
 G1 X104.987 Y132.615 F12000.000 ; move to first infill point
 G1 X103.702 Y132.615 E9.56914 F1800.000 ; infill
 G1 F9600
 G1 X104.987 Y132.615 E9.26408 ; wipe and retract
 G1 E4.56914 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.200 F12000.000 ; lift Z
 G1 X104.430 Y102.815 F12000.000 ; move to first perimeter point
 G1 Z6.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X101.979 Y102.815 E5.07276 F7200.000 ; perimeter
 G1 X100.201 Y91.215 E5.42120 ; perimeter
 G1 X102.490 Y91.215 E5.48916 ; perimeter
 G1 X104.420 Y102.755 E5.83658 ; perimeter
 G1 X104.073 Y102.634 F12000.000 ; move inwards before travel
 G1 X104.008 Y102.458 F12000.000 ; move to first perimeter point
 G1 X102.286 Y102.458 E5.88771 F7200.000 ; perimeter
 G1 X100.617 Y91.572 E6.21470 ; perimeter
 G1 X102.188 Y91.572 E6.26133 ; perimeter
 G1 X103.998 Y102.398 E6.58725 ; perimeter
 G1 X103.586 Y102.100 F12000.000 ; move to first perimeter point
 G1 X102.593 Y102.100 E6.61677 F7200.000 ; perimeter
 G1 X101.033 Y91.929 E6.92230 ; perimeter
 G1 X101.885 Y91.929 E6.94761 ; perimeter
 G1 X103.577 Y102.041 E7.25203 ; perimeter
 G1 X103.165 Y101.743 F12000.000 ; move to first perimeter point
 G1 X102.899 Y101.743 E7.25992 F7200.000 ; perimeter
 G1 X102.350 Y98.160 E7.36755 ; perimeter
 G1 X102.560 Y98.127 E7.37387 ; perimeter
 G1 X103.155 Y101.684 E7.48096 ; perimeter
 G1 X102.427 Y97.967 F12000.000 ; move to first infill point
 G1 X101.487 Y92.107 E7.85455 F1800.000 ; infill
 G1 F9600
 G1 X102.427 Y97.967 E6.44509 ; wipe and retract
 G1 E2.85455 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.200 F12000.000 ; lift Z
 G1 X95.608 Y123.815 F12000.000 ; move to first perimeter point
 G1 Z6.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X95.608 Y132.215 E5.24941 F7200.000 ; perimeter
 G1 X100.093 Y132.215 E5.38256 ; perimeter
 G1 X100.093 Y133.015 E5.40631 ; perimeter
 G1 X98.808 Y133.015 E5.44445 ; perimeter
 G1 X98.808 Y136.015 E5.53352 ; perimeter
 G1 X100.093 Y136.015 E5.57166 ; perimeter
 G1 X100.093 Y140.785 E5.71331 ; perimeter
 G1 X93.363 Y140.785 E5.91313 ; perimeter
 G1 X91.653 Y140.137 E5.96743 ; perimeter
 G1 X90.449 Y138.778 E6.02134 ; perimeter
 G1 X90.008 Y136.991 E6.07598 ; perimeter
 G1 X90.507 Y59.215 E8.38531 ; perimeter
 G1 X96.608 Y59.215 E8.56647 ; perimeter
 G1 X96.608 Y69.215 E8.86338 ; perimeter
 G1 X98.811 Y69.215 E8.92879 ; perimeter
 G1 X101.085 Y82.815 E9.33820 ; perimeter
 G1 X98.914 Y82.815 E9.40268 ; perimeter
 G1 X97.105 Y71.015 E9.75713 ; perimeter
 G1 X92.884 Y71.015 E9.88244 ; perimeter
 G1 X92.608 Y118.036 E11.27860 ; perimeter
 G1 X92.875 Y119.220 E11.31462 ; perimeter
 G1 X93.635 Y120.155 E11.35041 ; perimeter
 G1 X94.703 Y120.597 E11.38473 ; perimeter
 G1 X101.631 Y120.597 E11.59043 ; perimeter
 G1 X102.742 Y120.450 E11.62368 ; perimeter
 G1 X103.689 Y119.737 E11.65890 ; perimeter
 G1 X104.219 Y118.635 E11.69521 ; perimeter
 G1 X104.219 Y117.425 E11.73112 ; perimeter
 G1 X103.267 Y111.215 E11.91767 ; perimeter
 G1 X105.835 Y111.215 E11.99390 ; perimeter
 G1 X107.942 Y123.815 E12.37321 ; perimeter
 G1 X95.668 Y123.815 E12.73763 ; perimeter
 G1 X95.208 Y123.815 F12000.000 ; move inwards before travel
 G1 X95.251 Y123.458 F12000.000 ; move to first perimeter point
 G1 X95.251 Y132.572 E13.00824 F7200.000 ; perimeter
 G1 X98.451 Y132.572 E13.10325 ; perimeter
 G1 X98.451 Y136.372 E13.21608 ; perimeter
 G1 X99.736 Y136.372 E13.25422 ; perimeter
 G1 X99.736 Y140.428 E13.37466 ; perimeter
 G1 X93.428 Y140.428 E13.56194 ; perimeter
 G1 X91.862 Y139.834 E13.61168 ; perimeter
 G1 X90.774 Y138.607 E13.66037 ; perimeter
 G1 X90.366 Y136.949 E13.71107 ; perimeter
 G1 X90.862 Y59.572 E16.00855 ; perimeter
 G1 X96.251 Y59.572 E16.16856 ; perimeter
 G1 X96.251 Y69.572 E16.46548 ; perimeter
 G1 X98.509 Y69.572 E16.53251 ; perimeter
 G1 X100.664 Y82.458 E16.92042 ; perimeter
 G1 X99.220 Y82.458 E16.96328 ; perimeter
 G1 X97.411 Y70.658 E17.31773 ; perimeter
 G1 X92.529 Y70.658 E17.46268 ; perimeter
 G1 X92.251 Y118.075 E18.87060 ; perimeter
 G1 X92.545 Y119.380 E18.91031 ; perimeter
 G1 X93.415 Y120.451 E18.95127 ; perimeter
 G1 X94.632 Y120.954 E18.99038 ; perimeter
 G1 X101.655 Y120.954 E19.19889 ; perimeter
 G1 X102.881 Y120.792 E19.23563 ; perimeter
 G1 X103.973 Y119.970 E19.27620 ; perimeter
 G1 X104.576 Y118.716 E19.31751 ; perimeter
 G1 X104.576 Y117.398 E19.35665 ; perimeter
 G1 X103.683 Y111.572 E19.53165 ; perimeter
 G1 X105.532 Y111.572 E19.58656 ; perimeter
 G1 X107.520 Y123.458 E19.94436 ; perimeter
 G1 X95.311 Y123.458 E20.30687 ; perimeter
 G1 X94.894 Y123.100 F12000.000 ; move to first perimeter point
 G1 X94.894 Y132.929 E20.59868 F7200.000 ; perimeter
 G1 X98.094 Y132.929 E20.69369 ; perimeter
 G1 X98.094 Y136.729 E20.80652 ; perimeter
 G1 X99.378 Y136.729 E20.84466 ; perimeter
 G1 X99.378 Y140.071 E20.94390 ; perimeter
 G1 X93.493 Y140.071 E21.11863 ; perimeter
 G1 X92.071 Y139.532 E21.16381 ; perimeter
 G1 X91.100 Y138.436 E21.20728 ; perimeter
 G1 X90.723 Y136.906 E21.25405 ; perimeter
 G1 X91.216 Y59.929 E23.53966 ; perimeter
 G1 X95.894 Y59.929 E23.67855 ; perimeter
 G1 X95.894 Y69.929 E23.97546 ; perimeter
 G1 X98.206 Y69.929 E24.04412 ; perimeter
 G1 X100.242 Y82.100 E24.41053 ; perimeter
 G1 X99.527 Y82.100 E24.43177 ; perimeter
 G1 X97.718 Y70.300 E24.78622 ; perimeter
 G1 X92.174 Y70.300 E24.95081 ; perimeter
 G1 X91.893 Y118.114 E26.37048 ; perimeter
 G1 X92.216 Y119.540 E26.41389 ; perimeter
 G1 X93.195 Y120.746 E26.46001 ; perimeter
 G1 X94.561 Y121.311 E26.50392 ; perimeter
 G1 X101.678 Y121.311 E26.71523 ; perimeter
 G1 X103.021 Y121.133 E26.75546 ; perimeter
 G1 X104.257 Y120.203 E26.80139 ; perimeter
 G1 X104.933 Y118.797 E26.84769 ; perimeter
 G1 X104.933 Y117.371 E26.89006 ; perimeter
 G1 X104.099 Y111.929 E27.05352 ; perimeter
 G1 X105.230 Y111.929 E27.08710 ; perimeter
 G1 X107.098 Y123.100 E27.42341 ; perimeter
 G1 X94.954 Y123.100 E27.78399 ; perimeter
 G1 X94.537 Y122.743 F12000.000 ; move to first perimeter point
 G1 X94.537 Y133.286 E28.09701 F7200.000 ; perimeter
 G1 X97.737 Y133.286 E28.19202 ; perimeter
 G1 X97.737 Y137.086 E28.30485 ; perimeter
 G1 X99.021 Y137.086 E28.34298 ; perimeter
 G1 X99.021 Y139.714 E28.42102 ; perimeter
 G1 X93.559 Y139.714 E28.58321 ; perimeter
 G1 X92.280 Y139.229 E28.62384 ; perimeter
 G1 X91.426 Y138.265 E28.66207 ; perimeter
 G1 X91.080 Y136.864 E28.70491 ; perimeter
 G1 X91.571 Y60.286 E30.97867 ; perimeter
 G1 X95.537 Y60.286 E31.09641 ; perimeter
 G1 X95.537 Y69.943 E31.38316 ; perimeter
 G1 X91.819 Y69.943 E31.49354 ; perimeter
 G1 X91.536 Y118.153 E32.92496 ; perimeter
 G1 X91.886 Y119.700 E32.97207 ; perimeter
 G1 X92.975 Y121.041 E33.02336 ; perimeter
 G1 X94.490 Y121.668 E33.07206 ; perimeter
 G1 X101.702 Y121.668 E33.28618 ; perimeter
 G1 X103.161 Y121.475 E33.32989 ; perimeter
 G1 X104.541 Y120.436 E33.38118 ; perimeter
 G1 X105.290 Y118.879 E33.43248 ; perimeter
 G1 X105.290 Y117.343 E33.47807 ; perimeter
 G1 X104.515 Y112.286 E33.62999 ; perimeter
 G1 X104.928 Y112.286 E33.64224 ; perimeter
 G1 X106.677 Y122.743 E33.95705 ; perimeter
 G1 X94.597 Y122.743 E34.31571 ; perimeter
 G1 F9600
 G1 X94.537 Y133.286 E31.81183 ; wipe and retract
 G1 F9600
 G1 X97.737 Y133.286 E31.05183 ; wipe and retract
 G1 F9600
 G1 X97.737 Y137.086 E30.14933 ; wipe and retract
 G1 F9600
 G1 X99.021 Y137.086 E29.84426 ; wipe and retract
 G1 F9600
 G1 X99.021 Y138.259 E29.56571 ; wipe and retract
 G1 E29.31571 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.200 F12000.000 ; lift Z
 G1 X95.180 Y69.586 F12000.000 ; move to first perimeter point
 G1 Z6.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.869 Y69.586 E5.09831 F7200.000 ; perimeter
 G1 X91.926 Y60.643 E5.36386 ; perimeter
 G1 X95.180 Y60.643 E5.46047 ; perimeter
 G1 X95.180 Y69.526 E5.72422 ; perimeter
 G1 X94.823 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.228 Y69.229 E5.80126 F7200.000 ; perimeter
 G1 X92.281 Y61.000 E6.04560 ; perimeter
 G1 X94.823 Y61.000 E6.12108 ; perimeter
 G1 X94.823 Y69.169 E6.36363 ; perimeter
 G1 F9600
 G1 X92.228 Y69.229 E5.74724 ; wipe and retract
 G1 F9600
 G1 X92.281 Y61.000 E3.79276 ; wipe and retract
 G1 F9600
 G1 X94.823 Y61.000 E3.18906 ; wipe and retract
 G1 F9600
 G1 X94.823 Y67.633 E1.61363 ; wipe and retract
 G1 E1.36363 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.200 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z6.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X98.664 Y137.443 E5.58020 ; perimeter
 G1 X98.664 Y139.357 E5.63704 ; perimeter
 G1 X93.624 Y139.357 E5.78668 ; perimeter
 G1 X92.488 Y138.926 E5.82275 ; perimeter
 G1 X91.751 Y138.094 E5.85576 ; perimeter
 G1 X91.438 Y136.822 E5.89466 ; perimeter
 G1 X91.546 Y119.849 E6.39862 ; perimeter
 G1 X92.754 Y121.337 E6.45552 ; perimeter
 G1 X94.419 Y122.025 E6.50901 ; perimeter
 G1 X101.725 Y122.025 E6.72594 ; perimeter
 G1 X103.301 Y121.817 E6.77313 ; perimeter
 G1 X104.825 Y120.669 E6.82979 ; perimeter
 G1 X105.561 Y119.141 E6.88012 ; perimeter
 G1 X105.716 Y119.163 E6.88478 ; perimeter
 G1 X106.255 Y122.386 E6.98180 ; perimeter
 G1 X94.240 Y122.386 E7.33854 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E7.34313 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E7.39155 ; perimeter
 G1 X105.394 Y120.311 E7.41103 ; perimeter
 G1 X105.549 Y120.333 E7.41569 ; perimeter
 G1 X105.833 Y122.029 E7.46676 ; perimeter
 G1 X103.916 Y122.029 E7.52369 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E7.48037 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.09301 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E6.93719 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E6.89995 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E6.49145 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.03605 ; wipe and retract
 G1 E2.52369 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.200 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z6.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X98.307 Y137.800 E5.24598 ; perimeter
 G1 X98.307 Y139.000 E5.28161 ; perimeter
 G1 X93.690 Y139.000 E5.41870 ; perimeter
 G1 X92.697 Y138.624 E5.45022 ; perimeter
 G1 X92.077 Y137.923 E5.47800 ; perimeter
 G1 X91.795 Y136.780 E5.51297 ; perimeter
 G1 X91.897 Y120.847 E5.98603 ; perimeter
 G1 X92.534 Y121.632 E6.01604 ; perimeter
 G1 X93.823 Y122.165 E6.05744 ; perimeter
 G1 X93.823 Y133.940 E6.40706 ; perimeter
 G1 X93.621 Y134.011 F12000.000 ; move to first infill point
 G1 X92.017 Y134.011 E6.48379 F7200.000 ; infill
 G1 X92.018 Y133.436 E6.51129 ; infill
 G1 X93.621 Y133.436 E6.58797 ; infill
 G1 X93.621 Y132.860 E6.61547 ; infill
 G1 X92.022 Y132.860 E6.69197 ; infill
 G1 X92.025 Y132.285 E6.71947 ; infill
 G1 X93.621 Y132.285 E6.79580 ; infill
 G1 X93.621 Y131.710 E6.82330 ; infill
 G1 X92.029 Y131.710 E6.89944 ; infill
 G1 X92.033 Y131.135 E6.92695 ; infill
 G1 X93.621 Y131.135 E7.00292 ; infill
 G1 X93.621 Y130.560 E7.03042 ; infill
 G1 X92.036 Y130.560 E7.10622 ; infill
 G1 X92.040 Y129.985 E7.13372 ; infill
 G1 X93.621 Y129.985 E7.20934 ; infill
 G1 X93.621 Y129.410 E7.23684 ; infill
 G1 X92.044 Y129.410 E7.31228 ; infill
 G1 X92.047 Y128.835 E7.33978 ; infill
 G1 X93.621 Y128.835 E7.41505 ; infill
 G1 X93.621 Y128.260 E7.44255 ; infill
 G1 X92.051 Y128.260 E7.51764 ; infill
 G1 X92.055 Y127.685 E7.54514 ; infill
 G1 X93.621 Y127.685 E7.62006 ; infill
 G1 X93.621 Y127.109 E7.64756 ; infill
 G1 X92.058 Y127.109 E7.72230 ; infill
 G1 X92.062 Y126.534 E7.74980 ; infill
 G1 X93.621 Y126.534 E7.82436 ; infill
 G1 X93.621 Y125.959 E7.85186 ; infill
 G1 X92.066 Y125.959 E7.92625 ; infill
 G1 X92.069 Y125.384 E7.95375 ; infill
 G1 X93.621 Y125.384 E8.02796 ; infill
 G1 X93.621 Y124.809 E8.05546 ; infill
 G1 X92.073 Y124.809 E8.12949 ; infill
 G1 X92.077 Y124.234 E8.15699 ; infill
 G1 X93.621 Y124.234 E8.23085 ; infill
 G1 X93.621 Y123.659 E8.25835 ; infill
 G1 X92.081 Y123.659 E8.33203 ; infill
 G1 X92.084 Y123.084 E8.35953 ; infill
 G1 X93.621 Y123.084 E8.43304 ; infill
 G1 X93.621 Y122.509 E8.46054 ; infill
 G1 X92.088 Y122.509 E8.53387 ; infill
 G1 X92.092 Y121.934 E8.56137 ; infill
 G1 X92.472 Y121.934 E8.57954 ; infill
 G1 X92.017 Y134.586 F12000.000 ; move to first infill point
 G1 X96.821 Y134.586 E8.80930 F7200.000 ; infill
 G1 X96.821 Y135.161 E8.83680 ; infill
 G1 X92.017 Y135.161 E9.06655 ; infill
 G1 X92.017 Y135.736 E9.09406 ; infill
 G1 X96.821 Y135.736 E9.32381 ; infill
 G1 X96.821 Y136.311 E9.35131 ; infill
 G1 X92.017 Y136.311 E9.58107 ; infill
 G1 X92.034 Y136.886 E9.60858 ; infill
 G1 X96.821 Y136.886 E9.83753 ; infill
 G1 X96.821 Y137.461 E9.86503 ; infill
 G1 X92.175 Y137.461 E10.08719 ; infill
 G1 X92.502 Y138.036 E10.11883 ; infill
 G1 X96.821 Y138.036 E10.32536 ; infill
 G1 X98.086 Y138.612 F12000.000 ; move to first infill point
 G1 X93.538 Y138.612 E10.54286 F7200.000 ; infill
 G1 X91.703 Y119.744 F12000.000 ; move to first infill point
 G1 X91.491 Y119.308 E10.55726 F1800.000 ; infill
 G1 X91.388 Y118.357 E10.58566 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E10.35845 ; wipe and retract
 G1 F9600
 G1 X91.703 Y119.744 E10.24330 ; wipe and retract
 G1 E5.58566 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.200 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z6.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X105.107 Y121.240 F12000.000 ; move to first infill point
 G1 X105.494 Y121.240 E5.07167 F7200.000 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.931 E5.13770 F1800.000 ; infill
 G1 X105.579 Y117.931 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.15587 F1800.000 ; infill
 G1 X104.750 Y112.464 E5.30190 ; infill
 G1 F9600
 G1 X105.528 Y117.321 E4.13382 ; wipe and retract
 G1 F9600
 G1 X105.579 Y117.931 E3.98847 ; wipe and retract
 G1 E0.30190 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.200 F12000.000 ; lift Z
 G1 X99.914 Y132.615 F12000.000 ; move to first infill point
 G1 Z6.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.630 Y132.615 E5.08086 F1800.000 ; infill
 G1 F9600
 G1 X99.914 Y132.615 E4.77579 ; wipe and retract
 G1 E0.08086 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.200 F12000.000 ; lift Z
 G1 X99.855 Y81.922 F12000.000 ; move to first infill point
 G1 Z6.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.594 Y74.053 E5.50170 F1800.000 ; infill
 G1 X97.962 Y70.107 E5.62034 F1800.000 ; infill
 G1 X94.601 Y68.841 F12000.000 ; move to first infill point
 G1 X92.452 Y68.841 E5.72279 F7200.000 ; infill
 G1 X92.452 Y68.267 E5.75011 ; infill
 G1 X94.601 Y68.267 E5.85257 ; infill
 G1 X94.601 Y67.694 E5.87989 ; infill
 G1 X92.452 Y67.694 E5.98234 ; infill
 G1 X92.452 Y67.121 E6.00967 ; infill
 G1 X94.601 Y67.121 E6.11212 ; infill
 G1 X94.601 Y66.548 E6.13944 ; infill
 G1 X92.452 Y66.548 E6.24189 ; infill
 G1 X92.452 Y65.974 E6.26922 ; infill
 G1 X94.601 Y65.974 E6.37167 ; infill
 G1 X94.601 Y65.401 E6.39899 ; infill
 G1 X92.454 Y65.401 E6.50135 ; infill
 G1 X92.458 Y64.828 E6.52867 ; infill
 G1 X94.601 Y64.828 E6.63085 ; infill
 G1 X94.601 Y64.255 E6.65818 ; infill
 G1 X92.461 Y64.255 E6.76018 ; infill
 G1 X92.465 Y63.681 E6.78750 ; infill
 G1 X94.601 Y63.681 E6.88933 ; infill
 G1 X94.601 Y63.108 E6.91666 ; infill
 G1 X92.469 Y63.108 E7.01831 ; infill
 G1 X92.472 Y62.535 E7.04564 ; infill
 G1 X94.601 Y62.535 E7.14711 ; infill
 G1 X94.601 Y61.962 E7.17444 ; infill
 G1 X92.476 Y61.962 E7.27574 ; infill
 G1 X92.480 Y61.388 E7.30307 ; infill
 G1 X94.601 Y61.388 E7.40419 ; infill
 M106 S239.7 ; enable fan
 G1 F9600
 G1 X92.480 Y61.388 E6.90031 ; wipe and retract
 G1 F9600
 G1 X92.476 Y61.962 E6.76416 ; wipe and retract
 G1 F9600
 G1 X94.601 Y61.962 E6.25941 ; wipe and retract
 G1 F9600
 G1 X94.601 Y62.535 E6.12326 ; wipe and retract
 G1 F9600
 G1 X92.472 Y62.535 E5.61763 ; wipe and retract
 G1 F9600
 G1 X92.469 Y63.108 E5.48148 ; wipe and retract
 G1 F9600
 G1 X94.601 Y63.108 E4.97498 ; wipe and retract
 G1 F9600
 G1 X94.601 Y63.681 E4.83884 ; wipe and retract
 G1 F9600
 G1 X92.465 Y63.681 E4.33146 ; wipe and retract
 G1 F9600
 G1 X92.461 Y64.255 E4.19531 ; wipe and retract
 G1 F9600
 G1 X94.601 Y64.255 E3.68707 ; wipe and retract
 G1 F9600
 G1 X94.601 Y64.828 E3.55092 ; wipe and retract
 G1 F9600
 G1 X92.458 Y64.828 E3.04180 ; wipe and retract
 G1 F9600
 G1 X92.454 Y65.401 E2.90565 ; wipe and retract
 G1 F9600
 G1 X93.513 Y65.401 E2.65419 ; wipe and retract
 G1 E2.40419 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.200 F12000.000 ; lift Z
 G1 X104.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z6.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.524 Y133.015 E5.03814 F7200.000 ; perimeter
 G1 X103.524 Y132.215 E5.06189 ; perimeter
 G1 X109.346 Y132.215 E5.23478 ; perimeter
 G1 X109.992 Y136.074 E5.35096 ; perimeter
 G1 X109.992 Y137.923 E5.40585 ; perimeter
 G1 X109.148 Y139.531 E5.45977 ; perimeter
 G1 X107.653 Y140.562 E5.51368 ; perimeter
 G1 X105.814 Y140.785 E5.56870 ; perimeter
 G1 X103.524 Y140.785 E5.63671 ; perimeter
 G1 X103.524 Y136.015 E5.77836 ; perimeter
 G1 X104.808 Y136.015 E5.81650 ; perimeter
 G1 X104.808 Y133.075 E5.90379 ; perimeter
 G1 X104.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X105.165 Y136.372 F12000.000 ; move to first perimeter point
 G1 X105.165 Y132.572 E6.01661 F7200.000 ; perimeter
 G1 X109.044 Y132.572 E6.13179 ; perimeter
 G1 X109.635 Y136.104 E6.23811 ; perimeter
 G1 X109.635 Y137.835 E6.28951 ; perimeter
 G1 X108.873 Y139.287 E6.33820 ; perimeter
 G1 X107.523 Y140.218 E6.38689 ; perimeter
 G1 X105.792 Y140.428 E6.43865 ; perimeter
 G1 X103.881 Y140.428 E6.49541 ; perimeter
 G1 X103.881 Y136.372 E6.61586 ; perimeter
 G1 X105.105 Y136.372 E6.65222 ; perimeter
 G1 X105.522 Y136.729 F12000.000 ; move to first perimeter point
 G1 X105.522 Y132.929 E6.76504 F7200.000 ; perimeter
 G1 X108.742 Y132.929 E6.86064 ; perimeter
 G1 X109.278 Y136.133 E6.95710 ; perimeter
 G1 X109.278 Y137.747 E7.00500 ; perimeter
 G1 X108.597 Y139.043 E7.04847 ; perimeter
 G1 X107.393 Y139.874 E7.09193 ; perimeter
 G1 X105.771 Y140.071 E7.14044 ; perimeter
 G1 X104.238 Y140.071 E7.18596 ; perimeter
 G1 X104.238 Y136.729 E7.28520 ; perimeter
 G1 X105.462 Y136.729 E7.32156 ; perimeter
 G1 X105.879 Y137.086 F12000.000 ; move to first perimeter point
 G1 X105.879 Y133.286 E7.43439 F7200.000 ; perimeter
 G1 X108.440 Y133.286 E7.51040 ; perimeter
 G1 X108.921 Y136.163 E7.59701 ; perimeter
 G1 X108.921 Y137.659 E7.64142 ; perimeter
 G1 X108.322 Y138.799 E7.67966 ; perimeter
 G1 X107.262 Y139.530 E7.71790 ; perimeter
 G1 X105.749 Y139.714 E7.76315 ; perimeter
 G1 X104.595 Y139.714 E7.79742 ; perimeter
 G1 X104.595 Y137.086 E7.87546 ; perimeter
 G1 X105.819 Y137.086 E7.91182 ; perimeter
 G1 X106.236 Y137.443 F12000.000 ; move to first perimeter point
 G1 X106.236 Y133.643 E8.02465 F7200.000 ; perimeter
 G1 X108.137 Y133.643 E8.08108 ; perimeter
 G1 X108.564 Y136.193 E8.15783 ; perimeter
 G1 X108.564 Y137.571 E8.19875 ; perimeter
 G1 X108.047 Y138.555 E8.23176 ; perimeter
 G1 X107.132 Y139.187 E8.26477 ; perimeter
 G1 X105.728 Y139.357 E8.30677 ; perimeter
 G1 X104.952 Y139.357 E8.32980 ; perimeter
 G1 X104.952 Y137.443 E8.38664 ; perimeter
 G1 X106.176 Y137.443 E8.42299 ; perimeter
 G1 X106.593 Y137.800 F12000.000 ; move to first perimeter point
 G1 X106.593 Y134.000 E8.53582 F7200.000 ; perimeter
 G1 X107.835 Y134.000 E8.57268 ; perimeter
 G1 X108.207 Y136.222 E8.63958 ; perimeter
 G1 X108.207 Y137.482 E8.67700 ; perimeter
 G1 X107.772 Y138.311 E8.70478 ; perimeter
 G1 X107.001 Y138.843 E8.73257 ; perimeter
 G1 X105.706 Y139.000 E8.77131 ; perimeter
 G1 X105.309 Y139.000 E8.78310 ; perimeter
 G1 X105.309 Y137.800 E8.81873 ; perimeter
 G1 X106.533 Y137.800 E8.85509 ; perimeter
 G1 X105.697 Y138.777 F12000.000 ; move to first infill point
 G1 X105.697 Y138.001 E8.90066 F7200.000 ; infill
 G1 X106.404 Y138.001 E8.94220 ; infill
 G1 X106.404 Y138.711 E8.98392 ; infill
 G1 X107.111 Y138.486 E9.02751 ; infill
 G1 X107.111 Y134.221 E9.27818 ; infill
 G1 X107.818 Y135.966 F12000.000 ; move to first infill point
 G1 X107.818 Y137.597 E9.37403 F7200.000 ; infill
 G1 X104.987 Y132.615 F12000.000 ; move to first infill point
 G1 X103.702 Y132.615 E9.45489 F1800.000 ; infill
 G1 F9600
 G1 X104.987 Y132.615 E9.14982 ; wipe and retract
 G1 E4.45489 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.400 F12000.000 ; lift Z
 G1 X104.430 Y102.815 F12000.000 ; move to first perimeter point
 G1 Z6.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X101.979 Y102.815 E5.07276 F7200.000 ; perimeter
 G1 X100.201 Y91.215 E5.42120 ; perimeter
 G1 X102.490 Y91.215 E5.48916 ; perimeter
 G1 X104.420 Y102.755 E5.83658 ; perimeter
 G1 X104.073 Y102.634 F12000.000 ; move inwards before travel
 G1 X104.008 Y102.458 F12000.000 ; move to first perimeter point
 G1 X102.286 Y102.458 E5.88771 F7200.000 ; perimeter
 G1 X100.617 Y91.572 E6.21470 ; perimeter
 G1 X102.188 Y91.572 E6.26133 ; perimeter
 G1 X103.998 Y102.398 E6.58725 ; perimeter
 G1 X103.586 Y102.100 F12000.000 ; move to first perimeter point
 G1 X102.593 Y102.100 E6.61677 F7200.000 ; perimeter
 G1 X101.033 Y91.929 E6.92230 ; perimeter
 G1 X101.885 Y91.929 E6.94761 ; perimeter
 G1 X103.577 Y102.041 E7.25203 ; perimeter
 G1 X103.165 Y101.743 F12000.000 ; move to first perimeter point
 G1 X102.899 Y101.743 E7.25992 F7200.000 ; perimeter
 G1 X102.350 Y98.160 E7.36755 ; perimeter
 G1 X102.560 Y98.127 E7.37387 ; perimeter
 G1 X103.155 Y101.684 E7.48096 ; perimeter
 G1 X102.427 Y97.967 F12000.000 ; move to first infill point
 G1 X101.487 Y92.107 E7.85455 F1800.000 ; infill
 G1 F9600
 G1 X102.427 Y97.967 E6.44509 ; wipe and retract
 G1 E2.85455 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.400 F12000.000 ; lift Z
 G1 X95.608 Y123.815 F12000.000 ; move to first perimeter point
 G1 Z6.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X95.608 Y132.215 E5.24941 F7200.000 ; perimeter
 G1 X100.093 Y132.215 E5.38256 ; perimeter
 G1 X100.093 Y133.015 E5.40631 ; perimeter
 G1 X98.808 Y133.015 E5.44445 ; perimeter
 G1 X98.808 Y136.015 E5.53352 ; perimeter
 G1 X100.093 Y136.015 E5.57166 ; perimeter
 G1 X100.093 Y140.785 E5.71331 ; perimeter
 G1 X93.363 Y140.785 E5.91313 ; perimeter
 G1 X91.653 Y140.137 E5.96743 ; perimeter
 G1 X90.449 Y138.778 E6.02134 ; perimeter
 G1 X90.008 Y136.991 E6.07598 ; perimeter
 G1 X90.507 Y59.215 E8.38531 ; perimeter
 G1 X96.608 Y59.215 E8.56647 ; perimeter
 G1 X96.608 Y69.215 E8.86338 ; perimeter
 G1 X98.811 Y69.215 E8.92879 ; perimeter
 G1 X101.085 Y82.815 E9.33820 ; perimeter
 G1 X98.914 Y82.815 E9.40268 ; perimeter
 G1 X97.105 Y71.015 E9.75713 ; perimeter
 G1 X92.884 Y71.015 E9.88244 ; perimeter
 G1 X92.608 Y118.036 E11.27860 ; perimeter
 G1 X92.875 Y119.220 E11.31462 ; perimeter
 G1 X93.635 Y120.155 E11.35041 ; perimeter
 G1 X94.703 Y120.597 E11.38473 ; perimeter
 G1 X101.631 Y120.597 E11.59043 ; perimeter
 G1 X102.742 Y120.450 E11.62368 ; perimeter
 G1 X103.689 Y119.737 E11.65890 ; perimeter
 G1 X104.219 Y118.635 E11.69521 ; perimeter
 G1 X104.219 Y117.425 E11.73112 ; perimeter
 G1 X103.267 Y111.215 E11.91767 ; perimeter
 G1 X105.835 Y111.215 E11.99390 ; perimeter
 G1 X107.942 Y123.815 E12.37321 ; perimeter
 G1 X95.668 Y123.815 E12.73763 ; perimeter
 G1 X95.208 Y123.815 F12000.000 ; move inwards before travel
 G1 X95.251 Y123.458 F12000.000 ; move to first perimeter point
 G1 X95.251 Y132.572 E13.00824 F7200.000 ; perimeter
 G1 X98.451 Y132.572 E13.10325 ; perimeter
 G1 X98.451 Y136.372 E13.21608 ; perimeter
 G1 X99.736 Y136.372 E13.25422 ; perimeter
 G1 X99.736 Y140.428 E13.37466 ; perimeter
 G1 X93.428 Y140.428 E13.56194 ; perimeter
 G1 X91.862 Y139.834 E13.61168 ; perimeter
 G1 X90.774 Y138.607 E13.66037 ; perimeter
 G1 X90.366 Y136.949 E13.71107 ; perimeter
 G1 X90.862 Y59.572 E16.00855 ; perimeter
 G1 X96.251 Y59.572 E16.16856 ; perimeter
 G1 X96.251 Y69.572 E16.46548 ; perimeter
 G1 X98.509 Y69.572 E16.53251 ; perimeter
 G1 X100.664 Y82.458 E16.92042 ; perimeter
 G1 X99.220 Y82.458 E16.96328 ; perimeter
 G1 X97.411 Y70.658 E17.31773 ; perimeter
 G1 X92.529 Y70.658 E17.46268 ; perimeter
 G1 X92.251 Y118.075 E18.87060 ; perimeter
 G1 X92.545 Y119.380 E18.91031 ; perimeter
 G1 X93.415 Y120.451 E18.95127 ; perimeter
 G1 X94.632 Y120.954 E18.99038 ; perimeter
 G1 X101.655 Y120.954 E19.19889 ; perimeter
 G1 X102.881 Y120.792 E19.23563 ; perimeter
 G1 X103.973 Y119.970 E19.27620 ; perimeter
 G1 X104.576 Y118.716 E19.31751 ; perimeter
 G1 X104.576 Y117.398 E19.35665 ; perimeter
 G1 X103.683 Y111.572 E19.53165 ; perimeter
 G1 X105.532 Y111.572 E19.58656 ; perimeter
 G1 X107.520 Y123.458 E19.94436 ; perimeter
 G1 X95.311 Y123.458 E20.30687 ; perimeter
 G1 X94.894 Y123.100 F12000.000 ; move to first perimeter point
 G1 X94.894 Y132.929 E20.59868 F7200.000 ; perimeter
 G1 X98.094 Y132.929 E20.69369 ; perimeter
 G1 X98.094 Y136.729 E20.80652 ; perimeter
 G1 X99.378 Y136.729 E20.84466 ; perimeter
 G1 X99.378 Y140.071 E20.94390 ; perimeter
 G1 X93.493 Y140.071 E21.11863 ; perimeter
 G1 X92.071 Y139.532 E21.16381 ; perimeter
 G1 X91.100 Y138.436 E21.20728 ; perimeter
 G1 X90.723 Y136.906 E21.25405 ; perimeter
 G1 X91.216 Y59.929 E23.53966 ; perimeter
 G1 X95.894 Y59.929 E23.67855 ; perimeter
 G1 X95.894 Y69.929 E23.97546 ; perimeter
 G1 X98.206 Y69.929 E24.04412 ; perimeter
 G1 X100.242 Y82.100 E24.41053 ; perimeter
 G1 X99.527 Y82.100 E24.43177 ; perimeter
 G1 X97.718 Y70.300 E24.78622 ; perimeter
 G1 X92.174 Y70.300 E24.95081 ; perimeter
 G1 X91.893 Y118.114 E26.37048 ; perimeter
 G1 X92.216 Y119.540 E26.41389 ; perimeter
 G1 X93.195 Y120.746 E26.46001 ; perimeter
 G1 X94.561 Y121.311 E26.50392 ; perimeter
 G1 X101.678 Y121.311 E26.71523 ; perimeter
 G1 X103.021 Y121.133 E26.75546 ; perimeter
 G1 X104.257 Y120.203 E26.80139 ; perimeter
 G1 X104.933 Y118.797 E26.84769 ; perimeter
 G1 X104.933 Y117.371 E26.89006 ; perimeter
 G1 X104.099 Y111.929 E27.05352 ; perimeter
 G1 X105.230 Y111.929 E27.08710 ; perimeter
 G1 X107.098 Y123.100 E27.42341 ; perimeter
 G1 X94.954 Y123.100 E27.78399 ; perimeter
 G1 X94.537 Y122.743 F12000.000 ; move to first perimeter point
 G1 X94.537 Y133.286 E28.09701 F7200.000 ; perimeter
 G1 X97.737 Y133.286 E28.19202 ; perimeter
 G1 X97.737 Y137.086 E28.30485 ; perimeter
 G1 X99.021 Y137.086 E28.34298 ; perimeter
 G1 X99.021 Y139.714 E28.42102 ; perimeter
 G1 X93.559 Y139.714 E28.58321 ; perimeter
 G1 X92.280 Y139.229 E28.62384 ; perimeter
 G1 X91.426 Y138.265 E28.66207 ; perimeter
 G1 X91.080 Y136.864 E28.70491 ; perimeter
 G1 X91.571 Y60.286 E30.97867 ; perimeter
 G1 X95.537 Y60.286 E31.09641 ; perimeter
 G1 X95.537 Y69.943 E31.38316 ; perimeter
 G1 X91.819 Y69.943 E31.49354 ; perimeter
 G1 X91.536 Y118.153 E32.92496 ; perimeter
 G1 X91.886 Y119.700 E32.97207 ; perimeter
 G1 X92.975 Y121.041 E33.02336 ; perimeter
 G1 X94.490 Y121.668 E33.07206 ; perimeter
 G1 X101.702 Y121.668 E33.28618 ; perimeter
 G1 X103.161 Y121.475 E33.32989 ; perimeter
 G1 X104.541 Y120.436 E33.38118 ; perimeter
 G1 X105.290 Y118.879 E33.43248 ; perimeter
 G1 X105.290 Y117.343 E33.47807 ; perimeter
 G1 X104.515 Y112.286 E33.62999 ; perimeter
 G1 X104.928 Y112.286 E33.64224 ; perimeter
 G1 X106.677 Y122.743 E33.95705 ; perimeter
 G1 X94.597 Y122.743 E34.31571 ; perimeter
 G1 F9600
 G1 X94.537 Y133.286 E31.81183 ; wipe and retract
 G1 F9600
 G1 X97.737 Y133.286 E31.05183 ; wipe and retract
 G1 F9600
 G1 X97.737 Y137.086 E30.14933 ; wipe and retract
 G1 F9600
 G1 X99.021 Y137.086 E29.84426 ; wipe and retract
 G1 F9600
 G1 X99.021 Y138.259 E29.56571 ; wipe and retract
 G1 E29.31571 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.400 F12000.000 ; lift Z
 G1 X95.180 Y69.586 F12000.000 ; move to first perimeter point
 G1 Z6.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.869 Y69.586 E5.09831 F7200.000 ; perimeter
 G1 X91.926 Y60.643 E5.36386 ; perimeter
 G1 X95.180 Y60.643 E5.46047 ; perimeter
 G1 X95.180 Y69.526 E5.72422 ; perimeter
 G1 X94.823 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.228 Y69.229 E5.80126 F7200.000 ; perimeter
 G1 X92.281 Y61.000 E6.04560 ; perimeter
 G1 X94.823 Y61.000 E6.12108 ; perimeter
 G1 X94.823 Y69.169 E6.36363 ; perimeter
 G1 F9600
 G1 X92.228 Y69.229 E5.74724 ; wipe and retract
 G1 F9600
 G1 X92.281 Y61.000 E3.79276 ; wipe and retract
 G1 F9600
 G1 X94.823 Y61.000 E3.18906 ; wipe and retract
 G1 F9600
 G1 X94.823 Y67.633 E1.61363 ; wipe and retract
 G1 E1.36363 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.400 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z6.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X98.664 Y137.443 E5.58020 ; perimeter
 G1 X98.664 Y139.357 E5.63704 ; perimeter
 G1 X93.624 Y139.357 E5.78668 ; perimeter
 G1 X92.488 Y138.926 E5.82275 ; perimeter
 G1 X91.751 Y138.094 E5.85576 ; perimeter
 G1 X91.438 Y136.822 E5.89466 ; perimeter
 G1 X91.546 Y119.849 E6.39862 ; perimeter
 G1 X92.754 Y121.337 E6.45552 ; perimeter
 G1 X94.419 Y122.025 E6.50901 ; perimeter
 G1 X101.725 Y122.025 E6.72594 ; perimeter
 G1 X103.301 Y121.817 E6.77313 ; perimeter
 G1 X104.825 Y120.669 E6.82979 ; perimeter
 G1 X105.561 Y119.141 E6.88012 ; perimeter
 G1 X105.716 Y119.163 E6.88478 ; perimeter
 G1 X106.255 Y122.386 E6.98180 ; perimeter
 G1 X94.240 Y122.386 E7.33854 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E7.34313 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E7.39155 ; perimeter
 G1 X105.394 Y120.311 E7.41103 ; perimeter
 G1 X105.549 Y120.333 E7.41569 ; perimeter
 G1 X105.833 Y122.029 E7.46676 ; perimeter
 G1 X103.916 Y122.029 E7.52369 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E7.48037 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.09301 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E6.93719 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E6.89995 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E6.49144 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.03605 ; wipe and retract
 G1 E2.52369 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.400 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z6.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X98.307 Y137.800 E5.24598 ; perimeter
 G1 X98.307 Y139.000 E5.28161 ; perimeter
 G1 X93.690 Y139.000 E5.41870 ; perimeter
 G1 X92.697 Y138.624 E5.45022 ; perimeter
 G1 X92.077 Y137.923 E5.47800 ; perimeter
 G1 X91.795 Y136.780 E5.51297 ; perimeter
 G1 X91.897 Y120.847 E5.98603 ; perimeter
 G1 X92.534 Y121.632 E6.01604 ; perimeter
 G1 X93.823 Y122.165 E6.05744 ; perimeter
 G1 X93.823 Y133.940 E6.40706 ; perimeter
 G1 X93.904 Y134.201 F12000.000 ; move to first infill point
 G1 X93.904 Y138.779 E6.62532 F7200.000 ; infill
 G1 X94.478 Y138.779 E6.65267 ; infill
 G1 X94.478 Y134.201 E6.87094 ; infill
 G1 X95.051 Y134.201 E6.89829 ; infill
 G1 X95.051 Y138.779 E7.11655 ; infill
 G1 X95.625 Y138.779 E7.14390 ; infill
 G1 X95.625 Y134.201 E7.36217 ; infill
 G1 X96.198 Y134.201 E7.38952 ; infill
 G1 X96.198 Y138.779 E7.60778 ; infill
 G1 X96.772 Y138.001 E7.65384 ; infill
 G1 X96.772 Y138.779 E7.69091 ; infill
 G1 X97.345 Y138.779 E7.71825 ; infill
 G1 X97.345 Y138.001 E7.75532 ; infill
 G1 X97.919 Y138.001 E7.78266 ; infill
 G1 X97.919 Y138.779 E7.81973 ; infill
 G1 X93.331 Y138.637 F12000.000 ; move to first infill point
 G1 X93.331 Y122.193 E8.60385 F7200.000 ; infill
 G1 X92.757 Y121.956 E8.63345 ; infill
 G1 X92.757 Y138.303 E9.41295 ; infill
 G1 X92.184 Y136.985 F12000.000 ; move to first infill point
 G1 X92.184 Y133.448 E9.58160 F7200.000 ; infill
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X99.914 Y132.615 E9.66246 F1800.000 ; infill
 G1 F9600
 G1 X98.630 Y132.615 E9.35739 ; wipe and retract
 G1 E4.66246 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.400 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z6.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X104.774 Y121.808 F12000.000 ; move to first infill point
 G1 X104.774 Y121.449 E5.07163 F7200.000 ; infill
 G1 X105.374 Y121.352 E5.10194 ; infill
 G1 X105.374 Y121.808 E5.12466 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.931 E5.19069 F1800.000 ; infill
 G1 X105.579 Y117.931 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.20886 F1800.000 ; infill
 G1 X104.750 Y112.464 E5.35489 ; infill
 G1 F9600
 G1 X105.528 Y117.321 E4.18681 ; wipe and retract
 G1 F9600
 G1 X105.579 Y117.931 E4.04146 ; wipe and retract
 G1 E0.35489 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.400 F12000.000 ; lift Z
 G1 X91.388 Y118.357 F12000.000 ; move to first infill point
 G1 Z6.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.491 Y119.308 E5.02840 F1800.000 ; infill
 G1 X91.703 Y119.744 E5.04280 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E4.92765 ; wipe and retract
 G1 F9600
 G1 X91.388 Y118.357 E4.70044 ; wipe and retract
 G1 E0.04280 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.400 F12000.000 ; lift Z
 G1 X99.855 Y81.922 F12000.000 ; move to first infill point
 G1 Z6.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.594 Y74.053 E5.50170 F1800.000 ; infill
 G1 X98.594 Y74.053 F12000.000 ; move to first infill point
 G1 X97.962 Y70.107 E5.62034 F1800.000 ; infill
 G1 X94.434 Y69.008 F12000.000 ; move to first infill point
 G1 X94.434 Y61.221 E6.01207 F7200.000 ; infill
 G1 X93.829 Y61.221 E6.04251 ; infill
 G1 X93.829 Y69.008 E6.43424 ; infill
 G1 X93.224 Y69.008 E6.46468 ; infill
 G1 X93.224 Y61.221 E6.85642 ; infill
 G1 X92.619 Y65.554 F12000.000 ; move to first infill point
 G1 X92.619 Y69.008 E7.03018 F7200.000 ; infill
 G1 F9600
 G1 X92.619 Y65.554 E6.20988 ; wipe and retract
 G1 E2.03018 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.400 F12000.000 ; lift Z
 G1 Z6.400 F12000.000 ; move to next layer (54)
 G1 Z7.400 F12000.000 ; lift Z
 G1 X99.695 Y86.929 F12000.000 ; move to first support material point
 G1 Z6.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X101.225 Y84.450 E5.19461 F1680.000 ; support material
 G1 X100.570 Y84.450 E5.23835 ; support material
 G1 X99.505 Y86.177 E5.37388 ; support material
 G1 X99.620 Y86.929 E5.42474 ; support material
 G1 X99.695 Y86.929 E5.42973 ; support material
 G1 X102.330 Y87.465 F12000.000 ; move to first support material point
 G1 X101.737 Y83.915 E5.67019 F1680.000 ; support material
 G1 X98.616 Y83.915 E5.87865 ; support material
 G1 X99.160 Y87.465 E6.11858 ; support material
 G1 X102.330 Y87.465 E6.33035 ; support material
 G1 F9600
 G1 X99.160 Y87.465 E5.57749 ; wipe and retract
 G1 F9600
 G1 X98.616 Y83.915 E4.72451 ; wipe and retract
 G1 F9600
 G1 X101.737 Y83.915 E3.98340 ; wipe and retract
 G1 F9600
 G1 X102.330 Y87.465 E3.12856 ; wipe and retract
 G1 E1.33035 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.400 F12000.000 ; lift Z
 G1 X102.773 Y90.115 F12000.000 ; move to first support material point
 G1 Z6.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X102.631 Y89.265 E5.05757 F1680.000 ; support material
 G1 X99.436 Y89.265 E5.27102 ; support material
 G1 X99.566 Y90.115 E5.32847 ; support material
 G1 X102.773 Y90.115 E5.54270 ; support material
 M106 S237.15 ; enable fan
 G1 F9600
 G1 X99.566 Y90.115 E4.78107 ; wipe and retract
 G1 F9600
 G1 X99.436 Y89.265 E4.57684 ; wipe and retract
 G1 F9600
 G1 X102.631 Y89.265 E3.81801 ; wipe and retract
 G1 F9600
 G1 X102.773 Y90.115 E3.61333 ; wipe and retract
 G1 E0.54270 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.400 F12000.000 ; lift Z
 G1 X104.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z6.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.524 Y133.015 E5.03814 F7200.000 ; perimeter
 G1 X103.524 Y132.215 E5.06189 ; perimeter
 G1 X109.346 Y132.215 E5.23478 ; perimeter
 G1 X109.992 Y136.074 E5.35096 ; perimeter
 G1 X109.992 Y137.923 E5.40585 ; perimeter
 G1 X109.148 Y139.531 E5.45977 ; perimeter
 G1 X107.653 Y140.562 E5.51368 ; perimeter
 G1 X105.814 Y140.785 E5.56870 ; perimeter
 G1 X103.524 Y140.785 E5.63671 ; perimeter
 G1 X103.524 Y136.015 E5.77836 ; perimeter
 G1 X104.808 Y136.015 E5.81650 ; perimeter
 G1 X104.808 Y133.075 E5.90379 ; perimeter
 G1 X104.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X105.165 Y136.372 F12000.000 ; move to first perimeter point
 G1 X105.165 Y132.572 E6.01661 F7200.000 ; perimeter
 G1 X109.044 Y132.572 E6.13179 ; perimeter
 G1 X109.635 Y136.104 E6.23811 ; perimeter
 G1 X109.635 Y137.835 E6.28951 ; perimeter
 G1 X108.873 Y139.287 E6.33820 ; perimeter
 G1 X107.523 Y140.218 E6.38689 ; perimeter
 G1 X105.792 Y140.428 E6.43865 ; perimeter
 G1 X103.881 Y140.428 E6.49541 ; perimeter
 G1 X103.881 Y136.372 E6.61586 ; perimeter
 G1 X105.105 Y136.372 E6.65222 ; perimeter
 G1 X105.522 Y136.729 F12000.000 ; move to first perimeter point
 G1 X105.522 Y132.929 E6.76504 F7200.000 ; perimeter
 G1 X108.742 Y132.929 E6.86064 ; perimeter
 G1 X109.278 Y136.133 E6.95710 ; perimeter
 G1 X109.278 Y137.747 E7.00500 ; perimeter
 G1 X108.597 Y139.043 E7.04847 ; perimeter
 G1 X107.393 Y139.874 E7.09193 ; perimeter
 G1 X105.771 Y140.071 E7.14044 ; perimeter
 G1 X104.238 Y140.071 E7.18596 ; perimeter
 G1 X104.238 Y136.729 E7.28520 ; perimeter
 G1 X105.462 Y136.729 E7.32156 ; perimeter
 G1 X105.879 Y137.086 F12000.000 ; move to first perimeter point
 G1 X105.879 Y133.286 E7.43439 F7200.000 ; perimeter
 G1 X108.440 Y133.286 E7.51040 ; perimeter
 G1 X108.921 Y136.163 E7.59701 ; perimeter
 G1 X108.921 Y137.659 E7.64142 ; perimeter
 G1 X108.322 Y138.799 E7.67966 ; perimeter
 G1 X107.262 Y139.530 E7.71790 ; perimeter
 G1 X105.749 Y139.714 E7.76315 ; perimeter
 G1 X104.595 Y139.714 E7.79742 ; perimeter
 G1 X104.595 Y137.086 E7.87546 ; perimeter
 G1 X105.819 Y137.086 E7.91182 ; perimeter
 G1 X106.236 Y137.443 F12000.000 ; move to first perimeter point
 G1 X106.236 Y133.643 E8.02465 F7200.000 ; perimeter
 G1 X108.137 Y133.643 E8.08108 ; perimeter
 G1 X108.564 Y136.193 E8.15783 ; perimeter
 G1 X108.564 Y137.571 E8.19875 ; perimeter
 G1 X108.047 Y138.555 E8.23176 ; perimeter
 G1 X107.132 Y139.187 E8.26477 ; perimeter
 G1 X105.728 Y139.357 E8.30677 ; perimeter
 G1 X104.952 Y139.357 E8.32980 ; perimeter
 G1 X104.952 Y137.443 E8.38664 ; perimeter
 G1 X106.176 Y137.443 E8.42299 ; perimeter
 G1 X106.593 Y137.800 F12000.000 ; move to first perimeter point
 G1 X106.593 Y134.000 E8.53582 F7200.000 ; perimeter
 G1 X107.835 Y134.000 E8.57268 ; perimeter
 G1 X108.207 Y136.222 E8.63958 ; perimeter
 G1 X108.207 Y137.482 E8.67700 ; perimeter
 G1 X107.772 Y138.311 E8.70478 ; perimeter
 G1 X107.001 Y138.843 E8.73257 ; perimeter
 G1 X105.706 Y139.000 E8.77131 ; perimeter
 G1 X105.309 Y139.000 E8.78310 ; perimeter
 G1 X105.309 Y137.800 E8.81873 ; perimeter
 G1 X106.533 Y137.800 E8.85509 ; perimeter
 G1 X105.530 Y138.610 F12000.000 ; move to first infill point
 G1 X106.031 Y138.610 E8.88017 F7200.000 ; infill
 G1 X106.795 Y138.007 E8.92898 ; infill
 G1 X107.682 Y138.007 E8.97348 ; infill
 G1 X107.985 Y137.404 E9.00732 ; infill
 G1 X106.795 Y137.404 E9.06700 ; infill
 G1 X106.795 Y136.801 E9.09723 ; infill
 G1 X107.985 Y136.801 E9.15691 ; infill
 G1 X107.985 Y136.198 E9.18715 ; infill
 G1 X106.795 Y136.198 E9.24683 ; infill
 G1 X106.795 Y135.595 E9.27707 ; infill
 G1 X107.895 Y135.595 E9.33223 ; infill
 G1 X107.794 Y134.992 E9.36289 ; infill
 G1 X106.795 Y134.992 E9.41300 ; infill
 G1 X106.795 Y134.388 E9.44323 ; infill
 G1 X107.693 Y134.388 E9.48828 ; infill
 G1 X104.987 Y132.615 F12000.000 ; move to first infill point
 G1 X103.702 Y132.615 E9.56914 F1800.000 ; infill
 G1 F9600
 G1 X104.987 Y132.615 E9.26408 ; wipe and retract
 G1 E4.56914 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.600 F12000.000 ; lift Z
 G1 X104.430 Y102.815 F12000.000 ; move to first perimeter point
 G1 Z6.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X101.979 Y102.815 E5.07276 F7200.000 ; perimeter
 G1 X100.201 Y91.215 E5.42120 ; perimeter
 G1 X102.490 Y91.215 E5.48916 ; perimeter
 G1 X104.420 Y102.755 E5.83658 ; perimeter
 G1 X104.073 Y102.634 F12000.000 ; move inwards before travel
 G1 X104.008 Y102.458 F12000.000 ; move to first perimeter point
 G1 X102.286 Y102.458 E5.88771 F7200.000 ; perimeter
 G1 X100.617 Y91.572 E6.21470 ; perimeter
 G1 X102.188 Y91.572 E6.26133 ; perimeter
 G1 X103.998 Y102.398 E6.58725 ; perimeter
 G1 X103.586 Y102.100 F12000.000 ; move to first perimeter point
 G1 X102.593 Y102.100 E6.61677 F7200.000 ; perimeter
 G1 X101.033 Y91.929 E6.92230 ; perimeter
 G1 X101.885 Y91.929 E6.94761 ; perimeter
 G1 X103.577 Y102.041 E7.25203 ; perimeter
 G1 X103.165 Y101.743 F12000.000 ; move to first perimeter point
 G1 X102.899 Y101.743 E7.25992 F7200.000 ; perimeter
 G1 X102.350 Y98.160 E7.36755 ; perimeter
 G1 X102.560 Y98.127 E7.37387 ; perimeter
 G1 X103.155 Y101.684 E7.48096 ; perimeter
 G1 X102.427 Y97.967 F12000.000 ; move to first infill point
 G1 X101.487 Y92.107 E7.85455 F1800.000 ; infill
 G1 F9600
 G1 X102.427 Y97.967 E6.44509 ; wipe and retract
 G1 E2.85455 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.600 F12000.000 ; lift Z
 G1 X95.608 Y123.815 F12000.000 ; move to first perimeter point
 G1 Z6.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X95.608 Y132.215 E5.24941 F7200.000 ; perimeter
 G1 X100.093 Y132.215 E5.38256 ; perimeter
 G1 X100.093 Y133.015 E5.40631 ; perimeter
 G1 X98.808 Y133.015 E5.44445 ; perimeter
 G1 X98.808 Y136.015 E5.53352 ; perimeter
 G1 X100.093 Y136.015 E5.57166 ; perimeter
 G1 X100.093 Y140.785 E5.71331 ; perimeter
 G1 X93.363 Y140.785 E5.91313 ; perimeter
 G1 X91.653 Y140.137 E5.96743 ; perimeter
 G1 X90.449 Y138.778 E6.02134 ; perimeter
 G1 X90.008 Y136.991 E6.07598 ; perimeter
 G1 X90.507 Y59.215 E8.38531 ; perimeter
 G1 X96.608 Y59.215 E8.56647 ; perimeter
 G1 X96.608 Y69.215 E8.86338 ; perimeter
 G1 X98.811 Y69.215 E8.92879 ; perimeter
 G1 X101.085 Y82.815 E9.33820 ; perimeter
 G1 X98.914 Y82.815 E9.40268 ; perimeter
 G1 X97.105 Y71.015 E9.75713 ; perimeter
 G1 X92.884 Y71.015 E9.88244 ; perimeter
 G1 X92.608 Y118.036 E11.27860 ; perimeter
 G1 X92.875 Y119.220 E11.31462 ; perimeter
 G1 X93.635 Y120.155 E11.35041 ; perimeter
 G1 X94.703 Y120.597 E11.38473 ; perimeter
 G1 X101.631 Y120.597 E11.59043 ; perimeter
 G1 X102.742 Y120.450 E11.62368 ; perimeter
 G1 X103.689 Y119.737 E11.65890 ; perimeter
 G1 X104.219 Y118.635 E11.69521 ; perimeter
 G1 X104.219 Y117.425 E11.73112 ; perimeter
 G1 X103.267 Y111.215 E11.91767 ; perimeter
 G1 X105.835 Y111.215 E11.99390 ; perimeter
 G1 X107.942 Y123.815 E12.37321 ; perimeter
 G1 X95.668 Y123.815 E12.73763 ; perimeter
 G1 X95.208 Y123.815 F12000.000 ; move inwards before travel
 G1 X95.251 Y123.458 F12000.000 ; move to first perimeter point
 G1 X95.251 Y132.572 E13.00824 F7200.000 ; perimeter
 G1 X98.451 Y132.572 E13.10325 ; perimeter
 G1 X98.451 Y136.372 E13.21608 ; perimeter
 G1 X99.736 Y136.372 E13.25422 ; perimeter
 G1 X99.736 Y140.428 E13.37466 ; perimeter
 G1 X93.428 Y140.428 E13.56194 ; perimeter
 G1 X91.862 Y139.834 E13.61168 ; perimeter
 G1 X90.774 Y138.607 E13.66037 ; perimeter
 G1 X90.366 Y136.949 E13.71107 ; perimeter
 G1 X90.862 Y59.572 E16.00855 ; perimeter
 G1 X96.251 Y59.572 E16.16856 ; perimeter
 G1 X96.251 Y69.572 E16.46548 ; perimeter
 G1 X98.509 Y69.572 E16.53251 ; perimeter
 G1 X100.664 Y82.458 E16.92042 ; perimeter
 G1 X99.220 Y82.458 E16.96328 ; perimeter
 G1 X97.411 Y70.658 E17.31773 ; perimeter
 G1 X92.529 Y70.658 E17.46268 ; perimeter
 G1 X92.251 Y118.075 E18.87060 ; perimeter
 G1 X92.545 Y119.380 E18.91031 ; perimeter
 G1 X93.415 Y120.451 E18.95127 ; perimeter
 G1 X94.632 Y120.954 E18.99038 ; perimeter
 G1 X101.655 Y120.954 E19.19889 ; perimeter
 G1 X102.881 Y120.792 E19.23563 ; perimeter
 G1 X103.973 Y119.970 E19.27620 ; perimeter
 G1 X104.576 Y118.716 E19.31751 ; perimeter
 G1 X104.576 Y117.398 E19.35665 ; perimeter
 G1 X103.683 Y111.572 E19.53165 ; perimeter
 G1 X105.532 Y111.572 E19.58656 ; perimeter
 G1 X107.520 Y123.458 E19.94436 ; perimeter
 G1 X95.311 Y123.458 E20.30687 ; perimeter
 G1 X94.894 Y123.100 F12000.000 ; move to first perimeter point
 G1 X94.894 Y132.929 E20.59868 F7200.000 ; perimeter
 G1 X98.094 Y132.929 E20.69369 ; perimeter
 G1 X98.094 Y136.729 E20.80652 ; perimeter
 G1 X99.378 Y136.729 E20.84466 ; perimeter
 G1 X99.378 Y140.071 E20.94390 ; perimeter
 G1 X93.493 Y140.071 E21.11863 ; perimeter
 G1 X92.071 Y139.532 E21.16381 ; perimeter
 G1 X91.100 Y138.436 E21.20728 ; perimeter
 G1 X90.723 Y136.906 E21.25405 ; perimeter
 G1 X91.216 Y59.929 E23.53966 ; perimeter
 G1 X95.894 Y59.929 E23.67855 ; perimeter
 G1 X95.894 Y69.929 E23.97546 ; perimeter
 G1 X98.206 Y69.929 E24.04412 ; perimeter
 G1 X100.242 Y82.100 E24.41053 ; perimeter
 G1 X99.527 Y82.100 E24.43177 ; perimeter
 G1 X97.718 Y70.300 E24.78622 ; perimeter
 G1 X92.174 Y70.300 E24.95081 ; perimeter
 G1 X91.893 Y118.114 E26.37048 ; perimeter
 G1 X92.216 Y119.540 E26.41389 ; perimeter
 G1 X93.195 Y120.746 E26.46001 ; perimeter
 G1 X94.561 Y121.311 E26.50392 ; perimeter
 G1 X101.678 Y121.311 E26.71523 ; perimeter
 G1 X103.021 Y121.133 E26.75546 ; perimeter
 G1 X104.257 Y120.203 E26.80139 ; perimeter
 G1 X104.933 Y118.797 E26.84769 ; perimeter
 G1 X104.933 Y117.371 E26.89006 ; perimeter
 G1 X104.099 Y111.929 E27.05352 ; perimeter
 G1 X105.230 Y111.929 E27.08710 ; perimeter
 G1 X107.098 Y123.100 E27.42341 ; perimeter
 G1 X94.954 Y123.100 E27.78399 ; perimeter
 G1 X94.537 Y122.743 F12000.000 ; move to first perimeter point
 G1 X94.537 Y133.286 E28.09701 F7200.000 ; perimeter
 G1 X97.737 Y133.286 E28.19202 ; perimeter
 G1 X97.737 Y137.086 E28.30485 ; perimeter
 G1 X99.021 Y137.086 E28.34298 ; perimeter
 G1 X99.021 Y139.714 E28.42102 ; perimeter
 G1 X93.559 Y139.714 E28.58321 ; perimeter
 G1 X92.280 Y139.229 E28.62384 ; perimeter
 G1 X91.426 Y138.265 E28.66207 ; perimeter
 G1 X91.080 Y136.864 E28.70491 ; perimeter
 G1 X91.571 Y60.286 E30.97867 ; perimeter
 G1 X95.537 Y60.286 E31.09641 ; perimeter
 G1 X95.537 Y69.943 E31.38316 ; perimeter
 G1 X91.819 Y69.943 E31.49354 ; perimeter
 G1 X91.536 Y118.153 E32.92496 ; perimeter
 G1 X91.886 Y119.700 E32.97207 ; perimeter
 G1 X92.975 Y121.041 E33.02336 ; perimeter
 G1 X94.490 Y121.668 E33.07206 ; perimeter
 G1 X101.702 Y121.668 E33.28618 ; perimeter
 G1 X103.161 Y121.475 E33.32989 ; perimeter
 G1 X104.541 Y120.436 E33.38118 ; perimeter
 G1 X105.290 Y118.879 E33.43248 ; perimeter
 G1 X105.290 Y117.343 E33.47807 ; perimeter
 G1 X104.515 Y112.286 E33.62999 ; perimeter
 G1 X104.928 Y112.286 E33.64224 ; perimeter
 G1 X106.677 Y122.743 E33.95705 ; perimeter
 G1 X94.597 Y122.743 E34.31571 ; perimeter
 G1 F9600
 G1 X94.537 Y133.286 E31.81183 ; wipe and retract
 G1 F9600
 G1 X97.737 Y133.286 E31.05183 ; wipe and retract
 G1 F9600
 G1 X97.737 Y137.086 E30.14933 ; wipe and retract
 G1 F9600
 G1 X99.021 Y137.086 E29.84426 ; wipe and retract
 G1 F9600
 G1 X99.021 Y138.259 E29.56571 ; wipe and retract
 G1 E29.31571 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.600 F12000.000 ; lift Z
 G1 X95.180 Y69.586 F12000.000 ; move to first perimeter point
 G1 Z6.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.869 Y69.586 E5.09831 F7200.000 ; perimeter
 G1 X91.926 Y60.643 E5.36386 ; perimeter
 G1 X95.180 Y60.643 E5.46047 ; perimeter
 G1 X95.180 Y69.526 E5.72422 ; perimeter
 G1 X94.823 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.228 Y69.229 E5.80126 F7200.000 ; perimeter
 G1 X92.281 Y61.000 E6.04560 ; perimeter
 G1 X94.823 Y61.000 E6.12108 ; perimeter
 G1 X94.823 Y69.169 E6.36363 ; perimeter
 G1 F9600
 G1 X92.228 Y69.229 E5.74724 ; wipe and retract
 G1 F9600
 G1 X92.281 Y61.000 E3.79276 ; wipe and retract
 G1 F9600
 G1 X94.823 Y61.000 E3.18906 ; wipe and retract
 G1 F9600
 G1 X94.823 Y67.633 E1.61363 ; wipe and retract
 G1 E1.36363 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.600 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z6.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X98.664 Y137.443 E5.58020 ; perimeter
 G1 X98.664 Y139.357 E5.63704 ; perimeter
 G1 X93.624 Y139.357 E5.78668 ; perimeter
 G1 X92.488 Y138.926 E5.82275 ; perimeter
 G1 X91.751 Y138.094 E5.85576 ; perimeter
 G1 X91.438 Y136.822 E5.89466 ; perimeter
 G1 X91.546 Y119.849 E6.39862 ; perimeter
 G1 X92.754 Y121.337 E6.45552 ; perimeter
 G1 X94.419 Y122.025 E6.50901 ; perimeter
 G1 X101.725 Y122.025 E6.72594 ; perimeter
 G1 X103.301 Y121.817 E6.77313 ; perimeter
 G1 X104.825 Y120.669 E6.82979 ; perimeter
 G1 X105.561 Y119.141 E6.88012 ; perimeter
 G1 X105.716 Y119.163 E6.88478 ; perimeter
 G1 X106.255 Y122.386 E6.98180 ; perimeter
 G1 X94.240 Y122.386 E7.33854 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E7.34313 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E7.39155 ; perimeter
 G1 X105.394 Y120.311 E7.41103 ; perimeter
 G1 X105.549 Y120.333 E7.41569 ; perimeter
 G1 X105.833 Y122.029 E7.46676 ; perimeter
 G1 X103.916 Y122.029 E7.52369 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E7.48037 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.09301 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E6.93719 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E6.89995 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E6.49145 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.03605 ; wipe and retract
 G1 E2.52369 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.600 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z6.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X98.307 Y137.800 E5.24598 ; perimeter
 G1 X98.307 Y139.000 E5.28161 ; perimeter
 G1 X93.690 Y139.000 E5.41870 ; perimeter
 G1 X92.697 Y138.624 E5.45022 ; perimeter
 G1 X92.077 Y137.923 E5.47800 ; perimeter
 G1 X91.795 Y136.780 E5.51297 ; perimeter
 G1 X91.897 Y120.847 E5.98603 ; perimeter
 G1 X92.534 Y121.632 E6.01604 ; perimeter
 G1 X93.823 Y122.165 E6.05744 ; perimeter
 G1 X93.823 Y133.940 E6.40706 ; perimeter
 G1 X93.621 Y134.011 F12000.000 ; move to first infill point
 G1 X92.017 Y134.011 E6.48379 F7200.000 ; infill
 G1 X92.018 Y133.436 E6.51129 ; infill
 G1 X93.621 Y133.436 E6.58797 ; infill
 G1 X93.621 Y132.860 E6.61547 ; infill
 G1 X92.022 Y132.860 E6.69197 ; infill
 G1 X92.025 Y132.285 E6.71947 ; infill
 G1 X93.621 Y132.285 E6.79580 ; infill
 G1 X93.621 Y131.710 E6.82330 ; infill
 G1 X92.029 Y131.710 E6.89944 ; infill
 G1 X92.033 Y131.135 E6.92695 ; infill
 G1 X93.621 Y131.135 E7.00292 ; infill
 G1 X93.621 Y130.560 E7.03042 ; infill
 G1 X92.036 Y130.560 E7.10622 ; infill
 G1 X92.040 Y129.985 E7.13372 ; infill
 G1 X93.621 Y129.985 E7.20934 ; infill
 G1 X93.621 Y129.410 E7.23684 ; infill
 G1 X92.044 Y129.410 E7.31228 ; infill
 G1 X92.047 Y128.835 E7.33978 ; infill
 G1 X93.621 Y128.835 E7.41505 ; infill
 G1 X93.621 Y128.260 E7.44255 ; infill
 G1 X92.051 Y128.260 E7.51764 ; infill
 G1 X92.055 Y127.685 E7.54514 ; infill
 G1 X93.621 Y127.685 E7.62006 ; infill
 G1 X93.621 Y127.109 E7.64756 ; infill
 G1 X92.058 Y127.109 E7.72230 ; infill
 G1 X92.062 Y126.534 E7.74980 ; infill
 G1 X93.621 Y126.534 E7.82436 ; infill
 G1 X93.621 Y125.959 E7.85186 ; infill
 G1 X92.066 Y125.959 E7.92625 ; infill
 G1 X92.069 Y125.384 E7.95375 ; infill
 G1 X93.621 Y125.384 E8.02796 ; infill
 G1 X93.621 Y124.809 E8.05546 ; infill
 G1 X92.073 Y124.809 E8.12949 ; infill
 G1 X92.077 Y124.234 E8.15699 ; infill
 G1 X93.621 Y124.234 E8.23085 ; infill
 G1 X93.621 Y123.659 E8.25835 ; infill
 G1 X92.081 Y123.659 E8.33203 ; infill
 G1 X92.084 Y123.084 E8.35953 ; infill
 G1 X93.621 Y123.084 E8.43304 ; infill
 G1 X93.621 Y122.509 E8.46054 ; infill
 G1 X92.088 Y122.509 E8.53387 ; infill
 G1 X92.092 Y121.934 E8.56137 ; infill
 G1 X92.472 Y121.934 E8.57954 ; infill
 G1 X92.017 Y134.586 F12000.000 ; move to first infill point
 G1 X96.821 Y134.586 E8.80930 F7200.000 ; infill
 G1 X96.821 Y135.161 E8.83680 ; infill
 G1 X92.017 Y135.161 E9.06655 ; infill
 G1 X92.017 Y135.736 E9.09406 ; infill
 G1 X96.821 Y135.736 E9.32381 ; infill
 G1 X96.821 Y136.311 E9.35131 ; infill
 G1 X92.017 Y136.311 E9.58107 ; infill
 G1 X92.034 Y136.886 E9.60858 ; infill
 G1 X96.821 Y136.886 E9.83753 ; infill
 G1 X96.821 Y137.461 E9.86503 ; infill
 G1 X92.175 Y137.461 E10.08719 ; infill
 G1 X92.502 Y138.036 E10.11883 ; infill
 G1 X96.821 Y138.036 E10.32536 ; infill
 G1 X98.086 Y138.612 F12000.000 ; move to first infill point
 G1 X93.538 Y138.612 E10.54286 F7200.000 ; infill
 G1 X91.703 Y119.744 F12000.000 ; move to first infill point
 G1 X91.491 Y119.308 E10.55726 F1800.000 ; infill
 G1 X91.388 Y118.357 E10.58566 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E10.35845 ; wipe and retract
 G1 F9600
 G1 X91.703 Y119.744 E10.24330 ; wipe and retract
 G1 E5.58566 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.600 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z6.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X105.107 Y121.240 F12000.000 ; move to first infill point
 G1 X105.494 Y121.240 E5.07167 F7200.000 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.931 E5.13770 F1800.000 ; infill
 G1 X105.579 Y117.931 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.15587 F1800.000 ; infill
 G1 X104.750 Y112.464 E5.30190 ; infill
 G1 F9600
 G1 X105.528 Y117.321 E4.13382 ; wipe and retract
 G1 F9600
 G1 X105.579 Y117.931 E3.98847 ; wipe and retract
 G1 E0.30190 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.600 F12000.000 ; lift Z
 G1 X99.914 Y132.615 F12000.000 ; move to first infill point
 G1 Z6.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.630 Y132.615 E5.08086 F1800.000 ; infill
 G1 F9600
 G1 X99.914 Y132.615 E4.77579 ; wipe and retract
 G1 E0.08086 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.600 F12000.000 ; lift Z
 G1 X99.855 Y81.922 F12000.000 ; move to first infill point
 G1 Z6.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.594 Y74.053 E5.50170 F1800.000 ; infill
 G1 X98.594 Y74.053 F12000.000 ; move to first infill point
 G1 X97.962 Y70.107 E5.62034 F1800.000 ; infill
 G1 X94.601 Y68.841 F12000.000 ; move to first infill point
 G1 X92.452 Y68.841 E5.72279 F7200.000 ; infill
 G1 X92.452 Y68.267 E5.75011 ; infill
 G1 X94.601 Y68.267 E5.85256 ; infill
 G1 X94.601 Y67.694 E5.87989 ; infill
 G1 X92.452 Y67.694 E5.98234 ; infill
 G1 X92.452 Y67.121 E6.00966 ; infill
 G1 X94.601 Y67.121 E6.11212 ; infill
 G1 X94.601 Y66.548 E6.13944 ; infill
 G1 X92.452 Y66.548 E6.24189 ; infill
 G1 X92.452 Y65.974 E6.26922 ; infill
 G1 X94.601 Y65.974 E6.37167 ; infill
 G1 X94.601 Y65.401 E6.39899 ; infill
 G1 X92.454 Y65.401 E6.50135 ; infill
 G1 X92.458 Y64.828 E6.52867 ; infill
 G1 X94.601 Y64.828 E6.63085 ; infill
 G1 X94.601 Y64.255 E6.65817 ; infill
 G1 X92.461 Y64.255 E6.76018 ; infill
 G1 X92.465 Y63.681 E6.78750 ; infill
 G1 X94.601 Y63.681 E6.88933 ; infill
 G1 X94.601 Y63.108 E6.91666 ; infill
 G1 X92.469 Y63.108 E7.01831 ; infill
 G1 X92.472 Y62.535 E7.04563 ; infill
 G1 X94.601 Y62.535 E7.14711 ; infill
 G1 X94.601 Y61.962 E7.17444 ; infill
 G1 X92.476 Y61.962 E7.27574 ; infill
 G1 X92.480 Y61.388 E7.30306 ; infill
 G1 X94.601 Y61.388 E7.40419 ; infill
 G1 F9600
 G1 X92.480 Y61.388 E6.90031 ; wipe and retract
 G1 F9600
 G1 X92.476 Y61.962 E6.76416 ; wipe and retract
 G1 F9600
 G1 X94.601 Y61.962 E6.25940 ; wipe and retract
 G1 F9600
 G1 X94.601 Y62.535 E6.12326 ; wipe and retract
 G1 F9600
 G1 X92.472 Y62.535 E5.61763 ; wipe and retract
 G1 F9600
 G1 X92.469 Y63.108 E5.48148 ; wipe and retract
 G1 F9600
 G1 X94.601 Y63.108 E4.97498 ; wipe and retract
 G1 F9600
 G1 X94.601 Y63.681 E4.83883 ; wipe and retract
 G1 F9600
 G1 X92.465 Y63.681 E4.33146 ; wipe and retract
 G1 F9600
 G1 X92.461 Y64.255 E4.19531 ; wipe and retract
 G1 F9600
 G1 X94.601 Y64.255 E3.68706 ; wipe and retract
 G1 F9600
 G1 X94.601 Y64.828 E3.55092 ; wipe and retract
 G1 F9600
 G1 X92.458 Y64.828 E3.04180 ; wipe and retract
 G1 F9600
 G1 X92.454 Y65.401 E2.90565 ; wipe and retract
 G1 F9600
 G1 X93.513 Y65.401 E2.65419 ; wipe and retract
 G1 E2.40419 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.600 F12000.000 ; lift Z
 G1 X99.635 Y87.026 F12000.000 ; move to first support material point
 G1 Z6.700 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X101.225 Y84.450 E5.20223 F1680.000 ; support material
 G1 X100.570 Y84.450 E5.24597 ; support material
 G1 X99.505 Y86.177 E5.38150 ; support material
 G1 X99.635 Y87.026 E5.43892 ; support material
 G1 X102.380 Y87.765 F12000.000 ; move to first support material point
 G1 X101.737 Y83.915 E5.69969 F1680.000 ; support material
 G1 X98.616 Y83.915 E5.90816 ; support material
 G1 X99.206 Y87.765 E6.16836 ; support material
 G1 X102.380 Y87.765 E6.38041 ; support material
 G1 F9600
 G1 X99.206 Y87.765 E5.62655 ; wipe and retract
 G1 F9600
 G1 X98.616 Y83.915 E4.70150 ; wipe and retract
 G1 F9600
 G1 X101.737 Y83.915 E3.96038 ; wipe and retract
 G1 F9600
 G1 X102.380 Y87.765 E3.03331 ; wipe and retract
 G1 E1.38041 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.700 F12000.000 ; lift Z
 G1 X102.773 Y90.115 F12000.000 ; move to first support material point
 G1 Z6.700 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X102.631 Y89.265 E5.05757 F1680.000 ; support material
 G1 X99.436 Y89.265 E5.27102 ; support material
 G1 X99.566 Y90.115 E5.32847 ; support material
 G1 X102.773 Y90.115 E5.54270 ; support material
 M106 S242.25 ; enable fan
 G1 F9600
 G1 X99.566 Y90.115 E4.78107 ; wipe and retract
 G1 F9600
 G1 X99.436 Y89.265 E4.57684 ; wipe and retract
 G1 F9600
 G1 X102.631 Y89.265 E3.81801 ; wipe and retract
 G1 F9600
 G1 X102.773 Y90.115 E3.61333 ; wipe and retract
 G1 E0.54270 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.700 F12000.000 ; lift Z
 G1 X104.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z6.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.524 Y133.015 E5.03814 F7200.000 ; perimeter
 G1 X103.524 Y132.215 E5.06189 ; perimeter
 G1 X109.346 Y132.215 E5.23478 ; perimeter
 G1 X109.992 Y136.074 E5.35096 ; perimeter
 G1 X109.992 Y137.923 E5.40585 ; perimeter
 G1 X109.148 Y139.531 E5.45977 ; perimeter
 G1 X107.653 Y140.562 E5.51368 ; perimeter
 G1 X105.814 Y140.785 E5.56870 ; perimeter
 G1 X103.524 Y140.785 E5.63671 ; perimeter
 G1 X103.524 Y136.015 E5.77836 ; perimeter
 G1 X104.808 Y136.015 E5.81650 ; perimeter
 G1 X104.808 Y133.075 E5.90379 ; perimeter
 G1 X104.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X105.165 Y136.372 F12000.000 ; move to first perimeter point
 G1 X105.165 Y132.572 E6.01661 F7200.000 ; perimeter
 G1 X109.044 Y132.572 E6.13179 ; perimeter
 G1 X109.635 Y136.104 E6.23811 ; perimeter
 G1 X109.635 Y137.835 E6.28951 ; perimeter
 G1 X108.873 Y139.287 E6.33820 ; perimeter
 G1 X107.523 Y140.218 E6.38689 ; perimeter
 G1 X105.792 Y140.428 E6.43865 ; perimeter
 G1 X103.881 Y140.428 E6.49541 ; perimeter
 G1 X103.881 Y136.372 E6.61586 ; perimeter
 G1 X105.105 Y136.372 E6.65222 ; perimeter
 G1 X105.522 Y136.729 F12000.000 ; move to first perimeter point
 G1 X105.522 Y132.929 E6.76504 F7200.000 ; perimeter
 G1 X108.742 Y132.929 E6.86064 ; perimeter
 G1 X109.278 Y136.133 E6.95710 ; perimeter
 G1 X109.278 Y137.747 E7.00500 ; perimeter
 G1 X108.597 Y139.043 E7.04847 ; perimeter
 G1 X107.393 Y139.874 E7.09193 ; perimeter
 G1 X105.771 Y140.071 E7.14044 ; perimeter
 G1 X104.238 Y140.071 E7.18596 ; perimeter
 G1 X104.238 Y136.729 E7.28520 ; perimeter
 G1 X105.462 Y136.729 E7.32156 ; perimeter
 G1 X105.879 Y137.086 F12000.000 ; move to first perimeter point
 G1 X105.879 Y133.286 E7.43439 F7200.000 ; perimeter
 G1 X108.440 Y133.286 E7.51040 ; perimeter
 G1 X108.921 Y136.163 E7.59701 ; perimeter
 G1 X108.921 Y137.659 E7.64142 ; perimeter
 G1 X108.322 Y138.799 E7.67966 ; perimeter
 G1 X107.262 Y139.530 E7.71790 ; perimeter
 G1 X105.749 Y139.714 E7.76315 ; perimeter
 G1 X104.595 Y139.714 E7.79742 ; perimeter
 G1 X104.595 Y137.086 E7.87546 ; perimeter
 G1 X105.819 Y137.086 E7.91182 ; perimeter
 G1 X106.236 Y137.443 F12000.000 ; move to first perimeter point
 G1 X106.236 Y133.643 E8.02465 F7200.000 ; perimeter
 G1 X108.137 Y133.643 E8.08108 ; perimeter
 G1 X108.564 Y136.193 E8.15783 ; perimeter
 G1 X108.564 Y137.571 E8.19875 ; perimeter
 G1 X108.047 Y138.555 E8.23176 ; perimeter
 G1 X107.132 Y139.187 E8.26477 ; perimeter
 G1 X105.728 Y139.357 E8.30677 ; perimeter
 G1 X104.952 Y139.357 E8.32980 ; perimeter
 G1 X104.952 Y137.443 E8.38664 ; perimeter
 G1 X106.176 Y137.443 E8.42299 ; perimeter
 G1 X106.593 Y137.800 F12000.000 ; move to first perimeter point
 G1 X106.593 Y134.000 E8.53582 F7200.000 ; perimeter
 G1 X107.835 Y134.000 E8.57268 ; perimeter
 G1 X108.207 Y136.222 E8.63958 ; perimeter
 G1 X108.207 Y137.482 E8.67700 ; perimeter
 G1 X107.772 Y138.311 E8.70478 ; perimeter
 G1 X107.001 Y138.843 E8.73257 ; perimeter
 G1 X105.706 Y139.000 E8.77131 ; perimeter
 G1 X105.309 Y139.000 E8.78310 ; perimeter
 G1 X105.309 Y137.800 E8.81873 ; perimeter
 G1 X106.533 Y137.800 E8.85509 ; perimeter
 G1 X105.697 Y138.777 F12000.000 ; move to first infill point
 G1 X105.697 Y138.001 E8.90066 F7200.000 ; infill
 G1 X106.404 Y138.001 E8.94220 ; infill
 G1 X106.404 Y138.711 E8.98392 ; infill
 G1 X107.111 Y138.486 E9.02751 ; infill
 G1 X107.111 Y134.221 E9.27818 ; infill
 G1 X107.818 Y135.966 F12000.000 ; move to first infill point
 G1 X107.818 Y137.597 E9.37403 F7200.000 ; infill
 G1 X104.987 Y132.615 F12000.000 ; move to first infill point
 G1 X103.702 Y132.615 E9.45489 F1800.000 ; infill
 G1 F9600
 G1 X104.987 Y132.615 E9.14982 ; wipe and retract
 G1 E4.45489 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.800 F12000.000 ; lift Z
 G1 X104.430 Y102.815 F12000.000 ; move to first perimeter point
 G1 Z6.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X101.979 Y102.815 E5.07276 F7200.000 ; perimeter
 G1 X100.201 Y91.215 E5.42120 ; perimeter
 G1 X102.490 Y91.215 E5.48916 ; perimeter
 G1 X104.420 Y102.755 E5.83658 ; perimeter
 G1 X104.073 Y102.634 F12000.000 ; move inwards before travel
 G1 X104.008 Y102.458 F12000.000 ; move to first perimeter point
 G1 X102.286 Y102.458 E5.88771 F7200.000 ; perimeter
 G1 X100.617 Y91.572 E6.21470 ; perimeter
 G1 X102.188 Y91.572 E6.26133 ; perimeter
 G1 X103.998 Y102.398 E6.58725 ; perimeter
 G1 X103.586 Y102.100 F12000.000 ; move to first perimeter point
 G1 X102.593 Y102.100 E6.61677 F7200.000 ; perimeter
 G1 X101.033 Y91.929 E6.92230 ; perimeter
 G1 X101.885 Y91.929 E6.94761 ; perimeter
 G1 X103.577 Y102.041 E7.25203 ; perimeter
 G1 X103.165 Y101.743 F12000.000 ; move to first perimeter point
 G1 X102.899 Y101.743 E7.25992 F7200.000 ; perimeter
 G1 X102.350 Y98.160 E7.36755 ; perimeter
 G1 X102.560 Y98.127 E7.37387 ; perimeter
 G1 X103.155 Y101.684 E7.48097 ; perimeter
 G1 X102.427 Y97.967 F12000.000 ; move to first infill point
 G1 X101.487 Y92.107 E7.85455 F1800.000 ; infill
 G1 F9600
 G1 X102.427 Y97.967 E6.44510 ; wipe and retract
 G1 E2.85455 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.800 F12000.000 ; lift Z
 G1 X95.608 Y123.815 F12000.000 ; move to first perimeter point
 G1 Z6.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X95.608 Y132.215 E5.24941 F7200.000 ; perimeter
 G1 X100.093 Y132.215 E5.38256 ; perimeter
 G1 X100.093 Y133.015 E5.40631 ; perimeter
 G1 X98.808 Y133.015 E5.44445 ; perimeter
 G1 X98.808 Y136.015 E5.53352 ; perimeter
 G1 X100.093 Y136.015 E5.57166 ; perimeter
 G1 X100.093 Y140.785 E5.71331 ; perimeter
 G1 X93.363 Y140.785 E5.91313 ; perimeter
 G1 X91.653 Y140.137 E5.96743 ; perimeter
 G1 X90.449 Y138.778 E6.02134 ; perimeter
 G1 X90.008 Y136.991 E6.07598 ; perimeter
 G1 X90.507 Y59.215 E8.38531 ; perimeter
 G1 X96.608 Y59.215 E8.56647 ; perimeter
 G1 X96.608 Y69.215 E8.86338 ; perimeter
 G1 X98.811 Y69.215 E8.92879 ; perimeter
 G1 X101.085 Y82.815 E9.33820 ; perimeter
 G1 X98.914 Y82.815 E9.40268 ; perimeter
 G1 X97.105 Y71.015 E9.75713 ; perimeter
 G1 X92.884 Y71.015 E9.88244 ; perimeter
 G1 X92.608 Y118.036 E11.27860 ; perimeter
 G1 X92.875 Y119.220 E11.31462 ; perimeter
 G1 X93.635 Y120.155 E11.35041 ; perimeter
 G1 X94.703 Y120.597 E11.38473 ; perimeter
 G1 X101.631 Y120.597 E11.59043 ; perimeter
 G1 X102.742 Y120.450 E11.62368 ; perimeter
 G1 X103.689 Y119.737 E11.65890 ; perimeter
 G1 X104.219 Y118.635 E11.69521 ; perimeter
 G1 X104.219 Y117.425 E11.73112 ; perimeter
 G1 X103.267 Y111.215 E11.91767 ; perimeter
 G1 X105.835 Y111.215 E11.99390 ; perimeter
 G1 X107.942 Y123.815 E12.37321 ; perimeter
 G1 X95.668 Y123.815 E12.73763 ; perimeter
 G1 X95.208 Y123.815 F12000.000 ; move inwards before travel
 G1 X95.251 Y123.458 F12000.000 ; move to first perimeter point
 G1 X95.251 Y132.572 E13.00824 F7200.000 ; perimeter
 G1 X98.451 Y132.572 E13.10325 ; perimeter
 G1 X98.451 Y136.372 E13.21608 ; perimeter
 G1 X99.736 Y136.372 E13.25422 ; perimeter
 G1 X99.736 Y140.428 E13.37466 ; perimeter
 G1 X93.428 Y140.428 E13.56194 ; perimeter
 G1 X91.862 Y139.834 E13.61168 ; perimeter
 G1 X90.774 Y138.607 E13.66037 ; perimeter
 G1 X90.366 Y136.949 E13.71107 ; perimeter
 G1 X90.862 Y59.572 E16.00855 ; perimeter
 G1 X96.251 Y59.572 E16.16856 ; perimeter
 G1 X96.251 Y69.572 E16.46548 ; perimeter
 G1 X98.509 Y69.572 E16.53251 ; perimeter
 G1 X100.664 Y82.458 E16.92042 ; perimeter
 G1 X99.220 Y82.458 E16.96328 ; perimeter
 G1 X97.411 Y70.658 E17.31773 ; perimeter
 G1 X92.529 Y70.658 E17.46268 ; perimeter
 G1 X92.251 Y118.075 E18.87060 ; perimeter
 G1 X92.545 Y119.380 E18.91031 ; perimeter
 G1 X93.415 Y120.451 E18.95127 ; perimeter
 G1 X94.632 Y120.954 E18.99038 ; perimeter
 G1 X101.655 Y120.954 E19.19889 ; perimeter
 G1 X102.881 Y120.792 E19.23563 ; perimeter
 G1 X103.973 Y119.970 E19.27620 ; perimeter
 G1 X104.576 Y118.716 E19.31751 ; perimeter
 G1 X104.576 Y117.398 E19.35665 ; perimeter
 G1 X103.683 Y111.572 E19.53165 ; perimeter
 G1 X105.532 Y111.572 E19.58656 ; perimeter
 G1 X107.520 Y123.458 E19.94436 ; perimeter
 G1 X95.311 Y123.458 E20.30687 ; perimeter
 G1 X94.894 Y123.100 F12000.000 ; move to first perimeter point
 G1 X94.894 Y132.929 E20.59868 F7200.000 ; perimeter
 G1 X98.094 Y132.929 E20.69369 ; perimeter
 G1 X98.094 Y136.729 E20.80652 ; perimeter
 G1 X99.378 Y136.729 E20.84466 ; perimeter
 G1 X99.378 Y140.071 E20.94390 ; perimeter
 G1 X93.493 Y140.071 E21.11863 ; perimeter
 G1 X92.071 Y139.532 E21.16381 ; perimeter
 G1 X91.100 Y138.436 E21.20728 ; perimeter
 G1 X90.723 Y136.906 E21.25405 ; perimeter
 G1 X91.216 Y59.929 E23.53966 ; perimeter
 G1 X95.894 Y59.929 E23.67855 ; perimeter
 G1 X95.894 Y69.929 E23.97546 ; perimeter
 G1 X98.206 Y69.929 E24.04412 ; perimeter
 G1 X100.242 Y82.100 E24.41053 ; perimeter
 G1 X99.527 Y82.100 E24.43177 ; perimeter
 G1 X97.718 Y70.300 E24.78622 ; perimeter
 G1 X92.174 Y70.300 E24.95081 ; perimeter
 G1 X91.893 Y118.114 E26.37048 ; perimeter
 G1 X92.216 Y119.540 E26.41389 ; perimeter
 G1 X93.195 Y120.746 E26.46001 ; perimeter
 G1 X94.561 Y121.311 E26.50392 ; perimeter
 G1 X101.678 Y121.311 E26.71523 ; perimeter
 G1 X103.021 Y121.133 E26.75546 ; perimeter
 G1 X104.257 Y120.203 E26.80139 ; perimeter
 G1 X104.933 Y118.797 E26.84769 ; perimeter
 G1 X104.933 Y117.371 E26.89006 ; perimeter
 G1 X104.099 Y111.929 E27.05352 ; perimeter
 G1 X105.230 Y111.929 E27.08710 ; perimeter
 G1 X107.098 Y123.100 E27.42341 ; perimeter
 G1 X94.954 Y123.100 E27.78399 ; perimeter
 G1 X94.537 Y122.743 F12000.000 ; move to first perimeter point
 G1 X94.537 Y133.286 E28.09701 F7200.000 ; perimeter
 G1 X97.737 Y133.286 E28.19202 ; perimeter
 G1 X97.737 Y137.086 E28.30485 ; perimeter
 G1 X99.021 Y137.086 E28.34298 ; perimeter
 G1 X99.021 Y139.714 E28.42102 ; perimeter
 G1 X93.559 Y139.714 E28.58321 ; perimeter
 G1 X92.280 Y139.229 E28.62384 ; perimeter
 G1 X91.426 Y138.265 E28.66207 ; perimeter
 G1 X91.080 Y136.864 E28.70491 ; perimeter
 G1 X91.571 Y60.286 E30.97867 ; perimeter
 G1 X95.537 Y60.286 E31.09641 ; perimeter
 G1 X95.537 Y69.943 E31.38316 ; perimeter
 G1 X91.819 Y69.943 E31.49354 ; perimeter
 G1 X91.536 Y118.153 E32.92496 ; perimeter
 G1 X91.886 Y119.700 E32.97207 ; perimeter
 G1 X92.975 Y121.041 E33.02336 ; perimeter
 G1 X94.490 Y121.668 E33.07206 ; perimeter
 G1 X101.702 Y121.668 E33.28618 ; perimeter
 G1 X103.161 Y121.475 E33.32989 ; perimeter
 G1 X104.541 Y120.436 E33.38118 ; perimeter
 G1 X105.290 Y118.879 E33.43248 ; perimeter
 G1 X105.290 Y117.343 E33.47807 ; perimeter
 G1 X104.515 Y112.286 E33.62999 ; perimeter
 G1 X104.928 Y112.286 E33.64224 ; perimeter
 G1 X106.677 Y122.743 E33.95705 ; perimeter
 G1 X94.597 Y122.743 E34.31571 ; perimeter
 G1 F9600
 G1 X94.537 Y133.286 E31.81183 ; wipe and retract
 G1 F9600
 G1 X97.737 Y133.286 E31.05183 ; wipe and retract
 G1 F9600
 G1 X97.737 Y137.086 E30.14933 ; wipe and retract
 G1 F9600
 G1 X99.021 Y137.086 E29.84426 ; wipe and retract
 G1 F9600
 G1 X99.021 Y138.259 E29.56571 ; wipe and retract
 G1 E29.31571 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.800 F12000.000 ; lift Z
 G1 X95.180 Y69.586 F12000.000 ; move to first perimeter point
 G1 Z6.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.869 Y69.586 E5.09831 F7200.000 ; perimeter
 G1 X91.926 Y60.643 E5.36386 ; perimeter
 G1 X95.180 Y60.643 E5.46047 ; perimeter
 G1 X95.180 Y69.526 E5.72422 ; perimeter
 G1 X94.823 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.228 Y69.229 E5.80126 F7200.000 ; perimeter
 G1 X92.281 Y61.000 E6.04560 ; perimeter
 G1 X94.823 Y61.000 E6.12108 ; perimeter
 G1 X94.823 Y69.169 E6.36363 ; perimeter
 G1 F9600
 G1 X92.228 Y69.229 E5.74724 ; wipe and retract
 G1 F9600
 G1 X92.281 Y61.000 E3.79276 ; wipe and retract
 G1 F9600
 G1 X94.823 Y61.000 E3.18906 ; wipe and retract
 G1 F9600
 G1 X94.823 Y67.633 E1.61363 ; wipe and retract
 G1 E1.36363 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.800 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z6.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X98.664 Y137.443 E5.58020 ; perimeter
 G1 X98.664 Y139.357 E5.63704 ; perimeter
 G1 X93.624 Y139.357 E5.78668 ; perimeter
 G1 X92.488 Y138.926 E5.82275 ; perimeter
 G1 X91.751 Y138.094 E5.85576 ; perimeter
 G1 X91.438 Y136.822 E5.89466 ; perimeter
 G1 X91.546 Y119.849 E6.39862 ; perimeter
 G1 X92.754 Y121.337 E6.45552 ; perimeter
 G1 X94.419 Y122.025 E6.50901 ; perimeter
 G1 X101.725 Y122.025 E6.72594 ; perimeter
 G1 X103.301 Y121.817 E6.77313 ; perimeter
 G1 X104.825 Y120.669 E6.82979 ; perimeter
 G1 X105.561 Y119.141 E6.88012 ; perimeter
 G1 X105.716 Y119.163 E6.88478 ; perimeter
 G1 X106.255 Y122.386 E6.98180 ; perimeter
 G1 X94.240 Y122.386 E7.33854 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E7.34313 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E7.39155 ; perimeter
 G1 X105.394 Y120.311 E7.41103 ; perimeter
 G1 X105.549 Y120.333 E7.41569 ; perimeter
 G1 X105.833 Y122.029 E7.46676 ; perimeter
 G1 X103.916 Y122.029 E7.52369 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E7.48037 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.09301 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E6.93719 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E6.89995 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E6.49144 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.03605 ; wipe and retract
 G1 E2.52369 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.800 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z6.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X98.307 Y137.800 E5.24598 ; perimeter
 G1 X98.307 Y139.000 E5.28161 ; perimeter
 G1 X93.690 Y139.000 E5.41870 ; perimeter
 G1 X92.697 Y138.624 E5.45022 ; perimeter
 G1 X92.077 Y137.923 E5.47800 ; perimeter
 G1 X91.795 Y136.780 E5.51297 ; perimeter
 G1 X91.897 Y120.847 E5.98603 ; perimeter
 G1 X92.534 Y121.632 E6.01604 ; perimeter
 G1 X93.823 Y122.165 E6.05744 ; perimeter
 G1 X93.823 Y133.940 E6.40706 ; perimeter
 G1 X93.904 Y134.201 F12000.000 ; move to first infill point
 G1 X93.904 Y138.779 E6.62532 F7200.000 ; infill
 G1 X94.478 Y138.779 E6.65267 ; infill
 G1 X94.478 Y134.201 E6.87094 ; infill
 G1 X95.051 Y134.201 E6.89829 ; infill
 G1 X95.051 Y138.779 E7.11655 ; infill
 G1 X95.625 Y138.779 E7.14390 ; infill
 G1 X95.625 Y134.201 E7.36217 ; infill
 G1 X96.198 Y134.201 E7.38952 ; infill
 G1 X96.198 Y138.779 E7.60778 ; infill
 G1 X96.772 Y138.001 E7.65384 ; infill
 G1 X96.772 Y138.779 E7.69091 ; infill
 G1 X97.345 Y138.779 E7.71825 ; infill
 G1 X97.345 Y138.001 E7.75532 ; infill
 G1 X97.919 Y138.001 E7.78266 ; infill
 G1 X97.919 Y138.779 E7.81973 ; infill
 G1 X93.331 Y138.637 F12000.000 ; move to first infill point
 G1 X93.331 Y122.193 E8.60385 F7200.000 ; infill
 G1 X92.757 Y121.956 E8.63345 ; infill
 G1 X92.757 Y138.303 E9.41295 ; infill
 G1 X92.184 Y136.985 F12000.000 ; move to first infill point
 G1 X92.184 Y133.448 E9.58160 F7200.000 ; infill
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X99.914 Y132.615 E9.66246 F1800.000 ; infill
 G1 F9600
 G1 X98.630 Y132.615 E9.35739 ; wipe and retract
 G1 E4.66246 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.800 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z6.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X104.774 Y121.808 F12000.000 ; move to first infill point
 G1 X104.774 Y121.449 E5.07163 F7200.000 ; infill
 G1 X105.374 Y121.352 E5.10194 ; infill
 G1 X105.374 Y121.808 E5.12466 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.931 E5.19069 F1800.000 ; infill
 G1 X105.579 Y117.931 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.20886 F1800.000 ; infill
 G1 X104.750 Y112.464 E5.35489 ; infill
 G1 F9600
 G1 X105.528 Y117.321 E4.18681 ; wipe and retract
 G1 F9600
 G1 X105.579 Y117.931 E4.04146 ; wipe and retract
 G1 E0.35489 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.800 F12000.000 ; lift Z
 G1 X91.388 Y118.357 F12000.000 ; move to first infill point
 G1 Z6.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.491 Y119.308 E5.02840 F1800.000 ; infill
 G1 X91.703 Y119.744 E5.04280 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E4.92765 ; wipe and retract
 G1 F9600
 G1 X91.388 Y118.357 E4.70044 ; wipe and retract
 G1 E0.04280 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.800 F12000.000 ; lift Z
 G1 X99.855 Y81.922 F12000.000 ; move to first infill point
 G1 Z6.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.594 Y74.053 E5.50170 F1800.000 ; infill
 G1 X98.594 Y74.053 F12000.000 ; move to first infill point
 G1 X97.962 Y70.107 E5.62034 F1800.000 ; infill
 G1 X94.434 Y69.008 F12000.000 ; move to first infill point
 G1 X94.434 Y61.221 E6.01207 F7200.000 ; infill
 G1 X93.829 Y61.221 E6.04251 ; infill
 G1 X93.829 Y69.008 E6.43424 ; infill
 G1 X93.224 Y69.008 E6.46468 ; infill
 G1 X93.224 Y61.221 E6.85642 ; infill
 G1 X92.619 Y65.554 F12000.000 ; move to first infill point
 G1 X92.619 Y69.008 E7.03018 F7200.000 ; infill
 M106 S237.15 ; enable fan
 G1 F9600
 G1 X92.619 Y65.554 E6.20988 ; wipe and retract
 G1 E2.03018 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z7.800 F12000.000 ; lift Z
 G1 X104.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z7.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.480 Y133.015 E5.03942 F7200.000 ; perimeter
 G1 X103.480 Y132.215 E5.06318 ; perimeter
 G1 X109.346 Y132.215 E5.23735 ; perimeter
 G1 X109.992 Y136.074 E5.35353 ; perimeter
 G1 X109.992 Y137.923 E5.40842 ; perimeter
 G1 X109.148 Y139.531 E5.46234 ; perimeter
 G1 X107.653 Y140.562 E5.51626 ; perimeter
 G1 X105.814 Y140.785 E5.57128 ; perimeter
 G1 X103.480 Y140.785 E5.64056 ; perimeter
 G1 X103.480 Y136.015 E5.78221 ; perimeter
 G1 X104.808 Y136.015 E5.82164 ; perimeter
 G1 X104.808 Y133.075 E5.90893 ; perimeter
 G1 X104.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X105.165 Y136.372 F12000.000 ; move to first perimeter point
 G1 X105.165 Y132.572 E6.02176 F7200.000 ; perimeter
 G1 X109.044 Y132.572 E6.13693 ; perimeter
 G1 X109.635 Y136.104 E6.24325 ; perimeter
 G1 X109.635 Y137.835 E6.29465 ; perimeter
 G1 X108.873 Y139.287 E6.34334 ; perimeter
 G1 X107.523 Y140.218 E6.39203 ; perimeter
 G1 X105.792 Y140.428 E6.44380 ; perimeter
 G1 X103.837 Y140.428 E6.50184 ; perimeter
 G1 X103.837 Y136.372 E6.62229 ; perimeter
 G1 X105.105 Y136.372 E6.65993 ; perimeter
 G1 X105.522 Y136.729 F12000.000 ; move to first perimeter point
 G1 X105.522 Y132.929 E6.77276 F7200.000 ; perimeter
 G1 X108.742 Y132.929 E6.86835 ; perimeter
 G1 X109.278 Y136.133 E6.96482 ; perimeter
 G1 X109.278 Y137.747 E7.01272 ; perimeter
 G1 X108.597 Y139.043 E7.05618 ; perimeter
 G1 X107.393 Y139.874 E7.09965 ; perimeter
 G1 X105.771 Y140.071 E7.14816 ; perimeter
 G1 X104.194 Y140.071 E7.19496 ; perimeter
 G1 X104.194 Y136.729 E7.29420 ; perimeter
 G1 X105.462 Y136.729 E7.33184 ; perimeter
 G1 X105.879 Y137.086 F12000.000 ; move to first perimeter point
 G1 X105.879 Y133.286 E7.44467 F7200.000 ; perimeter
 G1 X108.440 Y133.286 E7.52069 ; perimeter
 G1 X108.921 Y136.163 E7.60729 ; perimeter
 G1 X108.921 Y137.659 E7.65170 ; perimeter
 G1 X108.322 Y138.799 E7.68994 ; perimeter
 G1 X107.262 Y139.530 E7.72818 ; perimeter
 G1 X105.749 Y139.714 E7.77344 ; perimeter
 G1 X104.552 Y139.714 E7.80899 ; perimeter
 G1 X104.552 Y137.086 E7.88703 ; perimeter
 G1 X105.819 Y137.086 E7.92467 ; perimeter
 G1 X106.236 Y137.443 F12000.000 ; move to first perimeter point
 G1 X106.236 Y133.643 E8.03750 F7200.000 ; perimeter
 G1 X108.137 Y133.643 E8.09394 ; perimeter
 G1 X108.564 Y136.193 E8.17069 ; perimeter
 G1 X108.564 Y137.571 E8.21161 ; perimeter
 G1 X108.047 Y138.555 E8.24462 ; perimeter
 G1 X107.132 Y139.187 E8.27763 ; perimeter
 G1 X105.728 Y139.357 E8.31963 ; perimeter
 G1 X104.909 Y139.357 E8.34395 ; perimeter
 G1 X104.909 Y137.443 E8.40078 ; perimeter
 G1 X106.176 Y137.443 E8.43842 ; perimeter
 G1 X106.593 Y137.800 F12000.000 ; move to first perimeter point
 G1 X106.593 Y134.000 E8.55125 F7200.000 ; perimeter
 G1 X107.835 Y134.000 E8.58811 ; perimeter
 G1 X108.207 Y136.222 E8.65500 ; perimeter
 G1 X108.207 Y137.482 E8.69242 ; perimeter
 G1 X107.772 Y138.311 E8.72021 ; perimeter
 G1 X107.001 Y138.843 E8.74800 ; perimeter
 G1 X105.706 Y139.000 E8.78674 ; perimeter
 G1 X105.266 Y139.000 E8.79981 ; perimeter
 G1 X105.266 Y137.800 E8.83544 ; perimeter
 G1 X106.533 Y137.800 E8.87309 ; perimeter
 G1 X105.487 Y138.611 F12000.000 ; move to first infill point
 G1 X106.015 Y138.611 E8.89959 F7200.000 ; infill
 G1 X106.795 Y138.008 E8.94903 ; infill
 G1 X107.681 Y138.008 E8.99351 ; infill
 G1 X107.985 Y137.405 E9.02739 ; infill
 G1 X106.795 Y137.405 E9.08710 ; infill
 G1 X106.795 Y136.802 E9.11736 ; infill
 G1 X107.985 Y136.802 E9.17707 ; infill
 G1 X107.985 Y136.198 E9.20733 ; infill
 G1 X106.795 Y136.198 E9.26704 ; infill
 G1 X106.795 Y135.595 E9.29730 ; infill
 G1 X107.895 Y135.595 E9.35249 ; infill
 G1 X107.794 Y134.992 E9.38317 ; infill
 G1 X106.795 Y134.992 E9.43330 ; infill
 G1 X106.795 Y134.388 E9.46357 ; infill
 G1 X107.693 Y134.388 E9.50864 ; infill
 G1 X104.987 Y132.615 F12000.000 ; move to first infill point
 G1 X103.659 Y132.615 E9.59222 F1800.000 ; infill
 G1 F9600
 G1 X104.987 Y132.615 E9.27687 ; wipe and retract
 G1 E4.59222 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.000 F12000.000 ; lift Z
 G1 X104.430 Y102.815 F12000.000 ; move to first perimeter point
 G1 Z7.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X101.979 Y102.815 E5.07276 F7200.000 ; perimeter
 G1 X100.201 Y91.215 E5.42120 ; perimeter
 G1 X102.490 Y91.215 E5.48916 ; perimeter
 G1 X104.420 Y102.755 E5.83658 ; perimeter
 G1 X104.073 Y102.634 F12000.000 ; move inwards before travel
 G1 X104.008 Y102.458 F12000.000 ; move to first perimeter point
 G1 X102.286 Y102.458 E5.88771 F7200.000 ; perimeter
 G1 X100.617 Y91.572 E6.21470 ; perimeter
 G1 X102.188 Y91.572 E6.26133 ; perimeter
 G1 X103.998 Y102.398 E6.58725 ; perimeter
 G1 X103.586 Y102.100 F12000.000 ; move to first perimeter point
 G1 X102.593 Y102.100 E6.61677 F7200.000 ; perimeter
 G1 X101.033 Y91.929 E6.92230 ; perimeter
 G1 X101.885 Y91.929 E6.94761 ; perimeter
 G1 X103.577 Y102.041 E7.25203 ; perimeter
 G1 X103.165 Y101.743 F12000.000 ; move to first perimeter point
 G1 X102.899 Y101.743 E7.25992 F7200.000 ; perimeter
 G1 X102.350 Y98.160 E7.36755 ; perimeter
 G1 X102.560 Y98.127 E7.37387 ; perimeter
 G1 X103.155 Y101.684 E7.48096 ; perimeter
 G1 X102.427 Y97.967 F12000.000 ; move to first infill point
 G1 X101.487 Y92.107 E7.85455 F1800.000 ; infill
 G1 F9600
 G1 X102.427 Y97.967 E6.44509 ; wipe and retract
 G1 E2.85455 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.000 F12000.000 ; lift Z
 G1 X95.608 Y123.815 F12000.000 ; move to first perimeter point
 G1 Z7.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X95.608 Y132.215 E5.24941 F7200.000 ; perimeter
 G1 X100.136 Y132.215 E5.38384 ; perimeter
 G1 X100.136 Y133.015 E5.40760 ; perimeter
 G1 X98.808 Y133.015 E5.44702 ; perimeter
 G1 X98.808 Y136.015 E5.53609 ; perimeter
 G1 X100.136 Y136.015 E5.57552 ; perimeter
 G1 X100.136 Y140.785 E5.71717 ; perimeter
 G1 X93.363 Y140.785 E5.91828 ; perimeter
 G1 X91.653 Y140.137 E5.97257 ; perimeter
 G1 X90.449 Y138.778 E6.02649 ; perimeter
 G1 X90.008 Y136.991 E6.08113 ; perimeter
 G1 X90.507 Y59.215 E8.39046 ; perimeter
 G1 X96.608 Y59.215 E8.57161 ; perimeter
 G1 X96.608 Y69.215 E8.86852 ; perimeter
 G1 X98.811 Y69.215 E8.93393 ; perimeter
 G1 X101.085 Y82.815 E9.34334 ; perimeter
 G1 X98.914 Y82.815 E9.40782 ; perimeter
 G1 X97.105 Y71.015 E9.76227 ; perimeter
 G1 X92.884 Y71.015 E9.88758 ; perimeter
 G1 X92.608 Y118.036 E11.28374 ; perimeter
 G1 X92.875 Y119.220 E11.31976 ; perimeter
 G1 X93.635 Y120.155 E11.35555 ; perimeter
 G1 X94.703 Y120.597 E11.38987 ; perimeter
 G1 X101.631 Y120.597 E11.59557 ; perimeter
 G1 X102.742 Y120.450 E11.62883 ; perimeter
 G1 X103.689 Y119.737 E11.66404 ; perimeter
 G1 X104.219 Y118.635 E11.70035 ; perimeter
 G1 X104.219 Y117.425 E11.73627 ; perimeter
 G1 X103.267 Y111.215 E11.92281 ; perimeter
 G1 X105.835 Y111.215 E11.99904 ; perimeter
 G1 X107.942 Y123.815 E12.37835 ; perimeter
 G1 X95.668 Y123.815 E12.74277 ; perimeter
 G1 X95.208 Y123.815 F12000.000 ; move inwards before travel
 G1 X95.251 Y123.458 F12000.000 ; move to first perimeter point
 G1 X95.251 Y132.572 E13.01338 F7200.000 ; perimeter
 G1 X98.451 Y132.572 E13.10839 ; perimeter
 G1 X98.451 Y136.372 E13.22122 ; perimeter
 G1 X99.779 Y136.372 E13.26065 ; perimeter
 G1 X99.779 Y140.428 E13.38109 ; perimeter
 G1 X93.428 Y140.428 E13.56966 ; perimeter
 G1 X91.862 Y139.834 E13.61939 ; perimeter
 G1 X90.774 Y138.607 E13.66808 ; perimeter
 G1 X90.366 Y136.949 E13.71879 ; perimeter
 G1 X90.862 Y59.572 E16.01626 ; perimeter
 G1 X96.251 Y59.572 E16.17628 ; perimeter
 G1 X96.251 Y69.572 E16.47319 ; perimeter
 G1 X98.509 Y69.572 E16.54023 ; perimeter
 G1 X100.664 Y82.458 E16.92814 ; perimeter
 G1 X99.220 Y82.458 E16.97099 ; perimeter
 G1 X97.411 Y70.658 E17.32544 ; perimeter
 G1 X92.529 Y70.658 E17.47040 ; perimeter
 G1 X92.251 Y118.075 E18.87831 ; perimeter
 G1 X92.545 Y119.380 E18.91803 ; perimeter
 G1 X93.415 Y120.451 E18.95898 ; perimeter
 G1 X94.632 Y120.954 E18.99809 ; perimeter
 G1 X101.655 Y120.954 E19.20660 ; perimeter
 G1 X102.881 Y120.792 E19.24334 ; perimeter
 G1 X103.973 Y119.970 E19.28391 ; perimeter
 G1 X104.576 Y118.716 E19.32522 ; perimeter
 G1 X104.576 Y117.398 E19.36436 ; perimeter
 G1 X103.683 Y111.572 E19.53937 ; perimeter
 G1 X105.532 Y111.572 E19.59427 ; perimeter
 G1 X107.520 Y123.458 E19.95208 ; perimeter
 G1 X95.311 Y123.458 E20.31458 ; perimeter
 G1 X94.894 Y123.100 F12000.000 ; move to first perimeter point
 G1 X94.894 Y132.929 E20.60639 F7200.000 ; perimeter
 G1 X98.094 Y132.929 E20.70141 ; perimeter
 G1 X98.094 Y136.729 E20.81423 ; perimeter
 G1 X99.422 Y136.729 E20.85366 ; perimeter
 G1 X99.422 Y140.071 E20.95290 ; perimeter
 G1 X93.493 Y140.071 E21.12892 ; perimeter
 G1 X92.071 Y139.532 E21.17410 ; perimeter
 G1 X91.100 Y138.436 E21.21756 ; perimeter
 G1 X90.723 Y136.906 E21.26433 ; perimeter
 G1 X91.216 Y59.929 E23.54995 ; perimeter
 G1 X95.894 Y59.929 E23.68883 ; perimeter
 G1 X95.894 Y69.929 E23.98574 ; perimeter
 G1 X98.206 Y69.929 E24.05440 ; perimeter
 G1 X100.242 Y82.100 E24.42082 ; perimeter
 G1 X99.527 Y82.100 E24.44205 ; perimeter
 G1 X97.718 Y70.300 E24.79650 ; perimeter
 G1 X92.174 Y70.300 E24.96109 ; perimeter
 G1 X91.893 Y118.114 E26.38076 ; perimeter
 G1 X92.216 Y119.540 E26.42417 ; perimeter
 G1 X93.195 Y120.746 E26.47030 ; perimeter
 G1 X94.561 Y121.311 E26.51420 ; perimeter
 G1 X101.678 Y121.311 E26.72552 ; perimeter
 G1 X103.021 Y121.133 E26.76574 ; perimeter
 G1 X104.257 Y120.203 E26.81168 ; perimeter
 G1 X104.933 Y118.797 E26.85798 ; perimeter
 G1 X104.933 Y117.371 E26.90035 ; perimeter
 G1 X104.099 Y111.929 E27.06381 ; perimeter
 G1 X105.230 Y111.929 E27.09738 ; perimeter
 G1 X107.098 Y123.100 E27.43369 ; perimeter
 G1 X94.954 Y123.100 E27.79427 ; perimeter
 G1 X94.537 Y122.743 F12000.000 ; move to first perimeter point
 G1 X94.537 Y133.286 E28.10729 F7200.000 ; perimeter
 G1 X97.737 Y133.286 E28.20230 ; perimeter
 G1 X97.737 Y137.086 E28.31513 ; perimeter
 G1 X99.065 Y137.086 E28.35456 ; perimeter
 G1 X99.065 Y139.714 E28.43259 ; perimeter
 G1 X93.559 Y139.714 E28.59607 ; perimeter
 G1 X92.280 Y139.229 E28.63669 ; perimeter
 G1 X91.426 Y138.265 E28.67493 ; perimeter
 G1 X91.080 Y136.864 E28.71776 ; perimeter
 G1 X91.571 Y60.286 E30.99152 ; perimeter
 G1 X95.537 Y60.286 E31.10927 ; perimeter
 G1 X95.537 Y69.943 E31.39601 ; perimeter
 G1 X91.819 Y69.943 E31.50639 ; perimeter
 G1 X91.536 Y118.153 E32.93782 ; perimeter
 G1 X91.886 Y119.700 E32.98492 ; perimeter
 G1 X92.975 Y121.041 E33.03621 ; perimeter
 G1 X94.490 Y121.668 E33.08492 ; perimeter
 G1 X101.702 Y121.668 E33.29903 ; perimeter
 G1 X103.161 Y121.475 E33.34274 ; perimeter
 G1 X104.541 Y120.436 E33.39404 ; perimeter
 G1 X105.290 Y118.879 E33.44534 ; perimeter
 G1 X105.290 Y117.343 E33.49093 ; perimeter
 G1 X104.515 Y112.286 E33.64285 ; perimeter
 G1 X104.928 Y112.286 E33.65510 ; perimeter
 G1 X106.677 Y122.743 E33.96991 ; perimeter
 G1 X94.597 Y122.743 E34.32857 ; perimeter
 G1 F9600
 G1 X94.537 Y133.286 E31.82469 ; wipe and retract
 G1 F9600
 G1 X97.737 Y133.286 E31.06469 ; wipe and retract
 G1 F9600
 G1 X97.737 Y137.086 E30.16219 ; wipe and retract
 G1 F9600
 G1 X99.065 Y137.086 E29.84684 ; wipe and retract
 G1 F9600
 G1 X99.065 Y138.215 E29.57857 ; wipe and retract
 G1 E29.32857 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.000 F12000.000 ; lift Z
 G1 X95.180 Y69.586 F12000.000 ; move to first perimeter point
 G1 Z7.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.869 Y69.586 E5.09831 F7200.000 ; perimeter
 G1 X91.926 Y60.643 E5.36386 ; perimeter
 G1 X95.180 Y60.643 E5.46047 ; perimeter
 G1 X95.180 Y69.526 E5.72422 ; perimeter
 G1 X94.823 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.228 Y69.229 E5.80126 F7200.000 ; perimeter
 G1 X92.281 Y61.000 E6.04560 ; perimeter
 G1 X94.823 Y61.000 E6.12108 ; perimeter
 G1 X94.823 Y69.169 E6.36363 ; perimeter
 G1 F9600
 G1 X92.228 Y69.229 E5.74724 ; wipe and retract
 G1 F9600
 G1 X92.281 Y61.000 E3.79276 ; wipe and retract
 G1 F9600
 G1 X94.823 Y61.000 E3.18906 ; wipe and retract
 G1 F9600
 G1 X94.823 Y67.633 E1.61363 ; wipe and retract
 G1 E1.36363 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.000 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z7.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X98.708 Y137.443 E5.58149 ; perimeter
 G1 X98.708 Y139.357 E5.63832 ; perimeter
 G1 X93.624 Y139.357 E5.78925 ; perimeter
 G1 X92.488 Y138.926 E5.82532 ; perimeter
 G1 X91.751 Y138.094 E5.85833 ; perimeter
 G1 X91.438 Y136.822 E5.89723 ; perimeter
 G1 X91.546 Y119.849 E6.40119 ; perimeter
 G1 X92.754 Y121.337 E6.45809 ; perimeter
 G1 X94.419 Y122.025 E6.51159 ; perimeter
 G1 X101.725 Y122.025 E6.72851 ; perimeter
 G1 X103.301 Y121.817 E6.77570 ; perimeter
 G1 X104.825 Y120.669 E6.83236 ; perimeter
 G1 X105.561 Y119.141 E6.88269 ; perimeter
 G1 X105.716 Y119.163 E6.88735 ; perimeter
 G1 X106.255 Y122.386 E6.98438 ; perimeter
 G1 X94.240 Y122.386 E7.34112 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E7.34570 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E7.39412 ; perimeter
 G1 X105.394 Y120.311 E7.41360 ; perimeter
 G1 X105.549 Y120.333 E7.41826 ; perimeter
 G1 X105.833 Y122.029 E7.46933 ; perimeter
 G1 X103.916 Y122.029 E7.52626 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E7.48294 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.09558 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E6.93976 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E6.90252 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E6.49402 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.03862 ; wipe and retract
 G1 E2.52626 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.000 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z7.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X98.351 Y137.800 E5.24726 ; perimeter
 G1 X98.351 Y139.000 E5.28289 ; perimeter
 G1 X93.690 Y139.000 E5.42128 ; perimeter
 G1 X92.697 Y138.624 E5.45279 ; perimeter
 G1 X92.077 Y137.923 E5.48057 ; perimeter
 G1 X91.795 Y136.780 E5.51554 ; perimeter
 G1 X91.897 Y120.847 E5.98860 ; perimeter
 G1 X92.534 Y121.632 E6.01862 ; perimeter
 G1 X93.823 Y122.165 E6.06001 ; perimeter
 G1 X93.823 Y133.940 E6.40963 ; perimeter
 G1 X93.621 Y134.011 F12000.000 ; move to first infill point
 G1 X92.017 Y134.011 E6.48636 F7200.000 ; infill
 G1 X92.018 Y133.436 E6.51386 ; infill
 G1 X93.621 Y133.436 E6.59054 ; infill
 G1 X93.621 Y132.860 E6.61804 ; infill
 G1 X92.022 Y132.860 E6.69454 ; infill
 G1 X92.025 Y132.285 E6.72204 ; infill
 G1 X93.621 Y132.285 E6.79837 ; infill
 G1 X93.621 Y131.710 E6.82587 ; infill
 G1 X92.029 Y131.710 E6.90202 ; infill
 G1 X92.033 Y131.135 E6.92952 ; infill
 G1 X93.621 Y131.135 E7.00549 ; infill
 G1 X93.621 Y130.560 E7.03299 ; infill
 G1 X92.036 Y130.560 E7.10879 ; infill
 G1 X92.040 Y129.985 E7.13629 ; infill
 G1 X93.621 Y129.985 E7.21191 ; infill
 G1 X93.621 Y129.410 E7.23941 ; infill
 G1 X92.044 Y129.410 E7.31485 ; infill
 G1 X92.047 Y128.835 E7.34235 ; infill
 G1 X93.621 Y128.835 E7.41762 ; infill
 G1 X93.621 Y128.260 E7.44512 ; infill
 G1 X92.051 Y128.260 E7.52021 ; infill
 G1 X92.055 Y127.685 E7.54771 ; infill
 G1 X93.621 Y127.685 E7.62263 ; infill
 G1 X93.621 Y127.109 E7.65013 ; infill
 G1 X92.058 Y127.109 E7.72487 ; infill
 G1 X92.062 Y126.534 E7.75237 ; infill
 G1 X93.621 Y126.534 E7.82693 ; infill
 G1 X93.621 Y125.959 E7.85443 ; infill
 G1 X92.066 Y125.959 E7.92882 ; infill
 G1 X92.069 Y125.384 E7.95632 ; infill
 G1 X93.621 Y125.384 E8.03053 ; infill
 G1 X93.621 Y124.809 E8.05803 ; infill
 G1 X92.073 Y124.809 E8.13206 ; infill
 G1 X92.077 Y124.234 E8.15957 ; infill
 G1 X93.621 Y124.234 E8.23342 ; infill
 G1 X93.621 Y123.659 E8.26092 ; infill
 G1 X92.081 Y123.659 E8.33460 ; infill
 G1 X92.084 Y123.084 E8.36211 ; infill
 G1 X93.621 Y123.084 E8.43561 ; infill
 G1 X93.621 Y122.509 E8.46311 ; infill
 G1 X92.088 Y122.509 E8.53644 ; infill
 G1 X92.092 Y121.934 E8.56394 ; infill
 G1 X92.472 Y121.934 E8.58211 ; infill
 G1 X92.017 Y134.586 F12000.000 ; move to first infill point
 G1 X96.821 Y134.586 E8.81187 F7200.000 ; infill
 G1 X96.821 Y135.161 E8.83937 ; infill
 G1 X92.017 Y135.161 E9.06913 ; infill
 G1 X92.017 Y135.736 E9.09663 ; infill
 G1 X96.821 Y135.736 E9.32638 ; infill
 G1 X96.821 Y136.311 E9.35388 ; infill
 G1 X92.017 Y136.311 E9.58364 ; infill
 G1 X92.034 Y136.886 E9.61115 ; infill
 G1 X96.821 Y136.886 E9.84010 ; infill
 G1 X96.821 Y137.461 E9.86760 ; infill
 G1 X92.175 Y137.461 E10.08977 ; infill
 G1 X92.502 Y138.036 E10.12140 ; infill
 G1 X96.821 Y138.036 E10.32793 ; infill
 G1 X98.129 Y138.612 F12000.000 ; move to first infill point
 G1 X93.538 Y138.612 E10.54750 F7200.000 ; infill
 G1 X91.703 Y119.744 F12000.000 ; move to first infill point
 G1 X91.491 Y119.308 E10.56190 F1800.000 ; infill
 G1 X91.388 Y118.357 E10.59030 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E10.36309 ; wipe and retract
 G1 F9600
 G1 X91.703 Y119.744 E10.24795 ; wipe and retract
 G1 E5.59030 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.000 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z7.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X105.107 Y121.240 F12000.000 ; move to first infill point
 G1 X105.494 Y121.240 E5.07167 F7200.000 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.931 E5.13770 F1800.000 ; infill
 G1 X105.579 Y117.931 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.15587 F1800.000 ; infill
 G1 X104.750 Y112.464 E5.30190 ; infill
 G1 F9600
 G1 X105.528 Y117.321 E4.13382 ; wipe and retract
 G1 F9600
 G1 X105.579 Y117.931 E3.98847 ; wipe and retract
 G1 E0.30190 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.000 F12000.000 ; lift Z
 G1 X99.957 Y132.615 F12000.000 ; move to first infill point
 G1 Z7.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.630 Y132.615 E5.08359 F1800.000 ; infill
 G1 F9600
 G1 X99.957 Y132.615 E4.76824 ; wipe and retract
 G1 E0.08359 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.000 F12000.000 ; lift Z
 G1 X99.855 Y81.922 F12000.000 ; move to first infill point
 G1 Z7.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.594 Y74.053 E5.50169 F1800.000 ; infill
 G1 X97.962 Y70.107 E5.62034 F1800.000 ; infill
 G1 X94.601 Y68.841 F12000.000 ; move to first infill point
 G1 X92.452 Y68.841 E5.72279 F7200.000 ; infill
 G1 X92.452 Y68.267 E5.75011 ; infill
 G1 X94.601 Y68.267 E5.85256 ; infill
 G1 X94.601 Y67.694 E5.87989 ; infill
 G1 X92.452 Y67.694 E5.98234 ; infill
 G1 X92.452 Y67.121 E6.00966 ; infill
 G1 X94.601 Y67.121 E6.11211 ; infill
 G1 X94.601 Y66.548 E6.13944 ; infill
 G1 X92.452 Y66.548 E6.24189 ; infill
 G1 X92.452 Y65.974 E6.26922 ; infill
 G1 X94.601 Y65.974 E6.37167 ; infill
 G1 X94.601 Y65.401 E6.39899 ; infill
 G1 X92.454 Y65.401 E6.50135 ; infill
 G1 X92.458 Y64.828 E6.52867 ; infill
 G1 X94.601 Y64.828 E6.63085 ; infill
 G1 X94.601 Y64.255 E6.65817 ; infill
 G1 X92.461 Y64.255 E6.76018 ; infill
 G1 X92.465 Y63.681 E6.78750 ; infill
 G1 X94.601 Y63.681 E6.88933 ; infill
 G1 X94.601 Y63.108 E6.91665 ; infill
 G1 X92.469 Y63.108 E7.01831 ; infill
 G1 X92.472 Y62.535 E7.04563 ; infill
 G1 X94.601 Y62.535 E7.14711 ; infill
 G1 X94.601 Y61.962 E7.17444 ; infill
 G1 X92.476 Y61.962 E7.27574 ; infill
 G1 X92.480 Y61.388 E7.30306 ; infill
 G1 X94.601 Y61.388 E7.40419 ; infill
 G1 F9600
 G1 X92.480 Y61.388 E6.90031 ; wipe and retract
 G1 F9600
 G1 X92.476 Y61.962 E6.76416 ; wipe and retract
 G1 F9600
 G1 X94.601 Y61.962 E6.25940 ; wipe and retract
 G1 F9600
 G1 X94.601 Y62.535 E6.12326 ; wipe and retract
 G1 F9600
 G1 X92.472 Y62.535 E5.61763 ; wipe and retract
 G1 F9600
 G1 X92.469 Y63.108 E5.48148 ; wipe and retract
 G1 F9600
 G1 X94.601 Y63.108 E4.97498 ; wipe and retract
 G1 F9600
 G1 X94.601 Y63.681 E4.83883 ; wipe and retract
 G1 F9600
 G1 X92.465 Y63.681 E4.33146 ; wipe and retract
 G1 F9600
 G1 X92.461 Y64.255 E4.19531 ; wipe and retract
 G1 F9600
 G1 X94.601 Y64.255 E3.68706 ; wipe and retract
 G1 F9600
 G1 X94.601 Y64.828 E3.55092 ; wipe and retract
 G1 F9600
 G1 X92.458 Y64.828 E3.04180 ; wipe and retract
 G1 F9600
 G1 X92.454 Y65.401 E2.90565 ; wipe and retract
 G1 F9600
 G1 X93.513 Y65.401 E2.65419 ; wipe and retract
 G1 E2.40419 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.000 F12000.000 ; lift Z
 G1 Z7.000 F12000.000 ; move to next layer (59)
 G1 Z8.000 F12000.000 ; lift Z
 G1 X98.445 Y83.930 F12000.000 ; move to first support material interface point
 G1 Z7.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X99.012 Y83.879 E5.03800 F1680.000 ; support material interface
 G1 F9600
 G1 X98.445 Y83.930 E4.90291 ; wipe and retract
 G1 E0.03800 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.000 F12000.000 ; lift Z
 G1 X101.987 Y84.257 F12000.000 ; move to first support material interface point
 G1 Z7.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.522 Y84.564 E5.23238 F1680.000 ; support material interface
 G1 X98.619 Y85.197 E5.27514 ; support material interface
 G1 X102.093 Y84.888 E5.50811 ; support material interface
 G1 X102.199 Y85.520 E5.55090 ; support material interface
 G1 X98.716 Y85.829 E5.78445 ; support material interface
 G1 X98.813 Y86.462 E5.82721 ; support material interface
 G1 X102.304 Y86.152 E6.06134 ; support material interface
 G1 X102.410 Y86.784 E6.10414 ; support material interface
 G1 X98.910 Y87.095 E6.33885 ; support material interface
 G1 X99.007 Y87.727 E6.38161 ; support material interface
 G1 X102.516 Y87.416 E6.61690 ; support material interface
 G1 X102.601 Y88.050 E6.65962 ; support material interface
 G1 X102.035 Y88.100 E6.69762 ; support material interface
 G1 F9600
 G1 X102.601 Y88.050 E6.56252 ; wipe and retract
 G1 F9600
 G1 X102.516 Y87.416 E6.41066 ; wipe and retract
 G1 F9600
 G1 X99.007 Y87.727 E5.57416 ; wipe and retract
 G1 F9600
 G1 X98.910 Y87.095 E5.42215 ; wipe and retract
 G1 F9600
 G1 X102.410 Y86.784 E4.58772 ; wipe and retract
 G1 F9600
 G1 X102.304 Y86.152 E4.43557 ; wipe and retract
 G1 F9600
 G1 X98.813 Y86.462 E3.60321 ; wipe and retract
 G1 F9600
 G1 X98.716 Y85.829 E3.45121 ; wipe and retract
 G1 F9600
 G1 X102.199 Y85.520 E2.62092 ; wipe and retract
 G1 F9600
 G1 X102.093 Y84.888 E2.46877 ; wipe and retract
 G1 F9600
 G1 X99.907 Y85.082 E1.94762 ; wipe and retract
 G1 E1.69762 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.000 F12000.000 ; lift Z
 G1 X102.388 Y90.149 F12000.000 ; move to first support material interface point
 G1 Z7.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X102.934 Y90.101 E5.03659 F1680.000 ; support material interface
 G1 X102.859 Y89.534 E5.07476 ; support material interface
 G1 X99.343 Y89.846 E5.31060 ; support material interface
 G1 X99.276 Y89.279 E5.34875 ; support material interface
 G1 X99.822 Y89.230 E5.38534 ; support material interface
 G1 F9600
 G1 X99.276 Y89.279 E5.25527 ; wipe and retract
 G1 F9600
 G1 X99.343 Y89.846 E5.11962 ; wipe and retract
 G1 F9600
 G1 X102.859 Y89.534 E4.28121 ; wipe and retract
 G1 F9600
 G1 X102.934 Y90.101 E4.14550 ; wipe and retract
 G1 F9600
 G1 X102.388 Y90.149 E4.01542 ; wipe and retract
 G1 E0.38534 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.000 F12000.000 ; lift Z
 G1 X104.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z7.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.134 Y133.015 E5.04971 F7200.000 ; perimeter
 G1 X103.134 Y132.215 E5.07346 ; perimeter
 G1 X109.346 Y132.215 E5.25792 ; perimeter
 G1 X109.992 Y136.074 E5.37410 ; perimeter
 G1 X109.992 Y137.923 E5.42899 ; perimeter
 G1 X109.148 Y139.531 E5.48291 ; perimeter
 G1 X107.653 Y140.562 E5.53683 ; perimeter
 G1 X105.814 Y140.785 E5.59185 ; perimeter
 G1 X103.134 Y140.785 E5.67142 ; perimeter
 G1 X103.134 Y136.015 E5.81307 ; perimeter
 G1 X104.808 Y136.015 E5.86278 ; perimeter
 G1 X104.808 Y133.075 E5.95007 ; perimeter
 G1 X104.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X105.165 Y136.372 F12000.000 ; move to first perimeter point
 G1 X105.165 Y132.572 E6.06290 F7200.000 ; perimeter
 G1 X109.044 Y132.572 E6.17807 ; perimeter
 G1 X109.635 Y136.104 E6.28439 ; perimeter
 G1 X109.635 Y137.835 E6.33579 ; perimeter
 G1 X108.873 Y139.287 E6.38448 ; perimeter
 G1 X107.523 Y140.218 E6.43317 ; perimeter
 G1 X105.792 Y140.428 E6.48494 ; perimeter
 G1 X103.491 Y140.428 E6.55327 ; perimeter
 G1 X103.491 Y136.372 E6.67371 ; perimeter
 G1 X105.105 Y136.372 E6.72164 ; perimeter
 G1 X105.522 Y136.729 F12000.000 ; move to first perimeter point
 G1 X105.522 Y132.929 E6.83447 F7200.000 ; perimeter
 G1 X108.742 Y132.929 E6.93006 ; perimeter
 G1 X109.278 Y136.133 E7.02653 ; perimeter
 G1 X109.278 Y137.747 E7.07443 ; perimeter
 G1 X108.597 Y139.043 E7.11789 ; perimeter
 G1 X107.393 Y139.874 E7.16136 ; perimeter
 G1 X105.771 Y140.071 E7.20987 ; perimeter
 G1 X103.848 Y140.071 E7.26695 ; perimeter
 G1 X103.848 Y136.729 E7.36620 ; perimeter
 G1 X105.462 Y136.729 E7.41412 ; perimeter
 G1 X105.879 Y137.086 F12000.000 ; move to first perimeter point
 G1 X105.879 Y133.286 E7.52695 F7200.000 ; perimeter
 G1 X108.440 Y133.286 E7.60297 ; perimeter
 G1 X108.921 Y136.163 E7.68958 ; perimeter
 G1 X108.921 Y137.659 E7.73398 ; perimeter
 G1 X108.322 Y138.799 E7.77222 ; perimeter
 G1 X107.262 Y139.530 E7.81046 ; perimeter
 G1 X105.749 Y139.714 E7.85572 ; perimeter
 G1 X104.205 Y139.714 E7.90156 ; perimeter
 G1 X104.205 Y137.086 E7.97960 ; perimeter
 G1 X105.819 Y137.086 E8.02753 ; perimeter
 G1 X106.236 Y137.443 F12000.000 ; move to first perimeter point
 G1 X106.236 Y133.643 E8.14035 F7200.000 ; perimeter
 G1 X108.137 Y133.643 E8.19679 ; perimeter
 G1 X108.564 Y136.193 E8.27354 ; perimeter
 G1 X108.564 Y137.571 E8.31446 ; perimeter
 G1 X108.047 Y138.555 E8.34747 ; perimeter
 G1 X107.132 Y139.187 E8.38048 ; perimeter
 G1 X105.728 Y139.357 E8.42248 ; perimeter
 G1 X104.562 Y139.357 E8.45708 ; perimeter
 G1 X104.562 Y137.443 E8.51392 ; perimeter
 G1 X106.176 Y137.443 E8.56184 ; perimeter
 G1 X106.593 Y137.800 F12000.000 ; move to first perimeter point
 G1 X106.593 Y134.000 E8.67467 F7200.000 ; perimeter
 G1 X107.835 Y134.000 E8.71153 ; perimeter
 G1 X108.207 Y136.222 E8.77842 ; perimeter
 G1 X108.207 Y137.482 E8.81584 ; perimeter
 G1 X107.772 Y138.311 E8.84363 ; perimeter
 G1 X107.001 Y138.843 E8.87142 ; perimeter
 G1 X105.706 Y139.000 E8.91016 ; perimeter
 G1 X104.919 Y139.000 E8.93352 ; perimeter
 G1 X104.919 Y137.800 E8.96915 ; perimeter
 G1 X106.533 Y137.800 E9.01708 ; perimeter
 G1 X105.308 Y138.001 F12000.000 ; move to first infill point
 G1 X105.308 Y138.779 E9.05763 F7200.000 ; infill
 G1 X105.935 Y138.768 E9.09039 ; infill
 G1 X105.935 Y138.001 E9.13039 ; infill
 G1 X106.563 Y138.001 E9.16314 ; infill
 G1 X106.563 Y138.692 E9.19917 ; infill
 G1 X107.190 Y138.432 E9.23462 ; infill
 G1 X107.190 Y134.221 E9.45431 ; infill
 G1 X107.818 Y135.966 F12000.000 ; move to first infill point
 G1 X107.818 Y137.597 E9.53941 F7200.000 ; infill
 G1 X104.987 Y132.615 F12000.000 ; move to first infill point
 G1 X103.312 Y132.615 E9.64480 F1800.000 ; infill
 G1 F9600
 G1 X104.987 Y132.615 E9.24718 ; wipe and retract
 G1 E4.64480 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.200 F12000.000 ; lift Z
 G1 X104.430 Y102.815 F12000.000 ; move to first perimeter point
 G1 Z7.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X101.979 Y102.815 E5.07276 F7200.000 ; perimeter
 G1 X100.201 Y91.215 E5.42120 ; perimeter
 G1 X102.490 Y91.215 E5.48916 ; perimeter
 G1 X104.420 Y102.755 E5.83658 ; perimeter
 G1 X104.073 Y102.634 F12000.000 ; move inwards before travel
 G1 X104.008 Y102.458 F12000.000 ; move to first perimeter point
 G1 X102.286 Y102.458 E5.88771 F7200.000 ; perimeter
 G1 X100.617 Y91.572 E6.21470 ; perimeter
 G1 X102.188 Y91.572 E6.26133 ; perimeter
 G1 X103.998 Y102.398 E6.58725 ; perimeter
 G1 X103.586 Y102.100 F12000.000 ; move to first perimeter point
 G1 X102.593 Y102.100 E6.61677 F7200.000 ; perimeter
 G1 X101.033 Y91.929 E6.92230 ; perimeter
 G1 X101.885 Y91.929 E6.94761 ; perimeter
 G1 X103.577 Y102.041 E7.25203 ; perimeter
 G1 X103.165 Y101.743 F12000.000 ; move to first perimeter point
 G1 X102.899 Y101.743 E7.25992 F7200.000 ; perimeter
 G1 X102.350 Y98.160 E7.36755 ; perimeter
 G1 X102.560 Y98.127 E7.37387 ; perimeter
 G1 X103.155 Y101.684 E7.48097 ; perimeter
 G1 X102.427 Y97.967 F12000.000 ; move to first infill point
 G1 X101.487 Y92.107 E7.85455 F1800.000 ; infill
 G1 F9600
 G1 X102.427 Y97.967 E6.44510 ; wipe and retract
 G1 E2.85455 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.200 F12000.000 ; lift Z
 G1 X95.608 Y123.815 F12000.000 ; move to first perimeter point
 G1 Z7.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X95.608 Y132.215 E5.24941 F7200.000 ; perimeter
 G1 X100.482 Y132.215 E5.39413 ; perimeter
 G1 X100.482 Y133.015 E5.41788 ; perimeter
 G1 X98.808 Y133.015 E5.46759 ; perimeter
 G1 X98.808 Y136.015 E5.55666 ; perimeter
 G1 X100.482 Y136.015 E5.60637 ; perimeter
 G1 X100.482 Y140.785 E5.74802 ; perimeter
 G1 X93.363 Y140.785 E5.95942 ; perimeter
 G1 X91.653 Y140.137 E6.01371 ; perimeter
 G1 X90.449 Y138.778 E6.06763 ; perimeter
 G1 X90.008 Y136.991 E6.12227 ; perimeter
 G1 X90.507 Y59.215 E8.43160 ; perimeter
 G1 X96.608 Y59.215 E8.61275 ; perimeter
 G1 X96.608 Y69.215 E8.90966 ; perimeter
 G1 X98.811 Y69.215 E8.97507 ; perimeter
 G1 X101.085 Y82.815 E9.38448 ; perimeter
 G1 X98.914 Y82.815 E9.44896 ; perimeter
 G1 X97.105 Y71.015 E9.80341 ; perimeter
 G1 X92.884 Y71.015 E9.92873 ; perimeter
 G1 X92.608 Y118.036 E11.32489 ; perimeter
 G1 X92.875 Y119.220 E11.36090 ; perimeter
 G1 X93.635 Y120.155 E11.39669 ; perimeter
 G1 X94.703 Y120.597 E11.43101 ; perimeter
 G1 X101.631 Y120.597 E11.63671 ; perimeter
 G1 X102.742 Y120.450 E11.66997 ; perimeter
 G1 X103.689 Y119.737 E11.70518 ; perimeter
 G1 X104.219 Y118.635 E11.74149 ; perimeter
 G1 X104.219 Y117.425 E11.77741 ; perimeter
 G1 X103.267 Y111.215 E11.96395 ; perimeter
 G1 X105.835 Y111.215 E12.04018 ; perimeter
 G1 X107.942 Y123.815 E12.41949 ; perimeter
 G1 X95.668 Y123.815 E12.78391 ; perimeter
 G1 X95.208 Y123.815 F12000.000 ; move inwards before travel
 G1 X95.251 Y123.458 F12000.000 ; move to first perimeter point
 G1 X95.251 Y132.572 E13.05452 F7200.000 ; perimeter
 G1 X98.451 Y132.572 E13.14953 ; perimeter
 G1 X98.451 Y136.372 E13.26236 ; perimeter
 G1 X100.125 Y136.372 E13.31207 ; perimeter
 G1 X100.125 Y140.428 E13.43252 ; perimeter
 G1 X93.428 Y140.428 E13.63137 ; perimeter
 G1 X91.862 Y139.834 E13.68110 ; perimeter
 G1 X90.774 Y138.607 E13.72979 ; perimeter
 G1 X90.366 Y136.949 E13.78050 ; perimeter
 G1 X90.862 Y59.572 E16.07797 ; perimeter
 G1 X96.251 Y59.572 E16.23799 ; perimeter
 G1 X96.251 Y69.572 E16.53490 ; perimeter
 G1 X98.509 Y69.572 E16.60194 ; perimeter
 G1 X100.664 Y82.458 E16.98985 ; perimeter
 G1 X99.220 Y82.458 E17.03270 ; perimeter
 G1 X97.411 Y70.658 E17.38715 ; perimeter
 G1 X92.529 Y70.658 E17.53211 ; perimeter
 G1 X92.251 Y118.075 E18.94002 ; perimeter
 G1 X92.545 Y119.380 E18.97974 ; perimeter
 G1 X93.415 Y120.451 E19.02069 ; perimeter
 G1 X94.632 Y120.954 E19.05981 ; perimeter
 G1 X101.655 Y120.954 E19.26831 ; perimeter
 G1 X102.881 Y120.792 E19.30505 ; perimeter
 G1 X103.973 Y119.970 E19.34563 ; perimeter
 G1 X104.576 Y118.716 E19.38693 ; perimeter
 G1 X104.576 Y117.398 E19.42607 ; perimeter
 G1 X103.683 Y111.572 E19.60108 ; perimeter
 G1 X105.532 Y111.572 E19.65598 ; perimeter
 G1 X107.520 Y123.458 E20.01379 ; perimeter
 G1 X95.311 Y123.458 E20.37629 ; perimeter
 G1 X94.894 Y123.100 F12000.000 ; move to first perimeter point
 G1 X94.894 Y132.929 E20.66811 F7200.000 ; perimeter
 G1 X98.094 Y132.929 E20.76312 ; perimeter
 G1 X98.094 Y136.729 E20.87594 ; perimeter
 G1 X99.768 Y136.729 E20.92565 ; perimeter
 G1 X99.768 Y140.071 E21.02490 ; perimeter
 G1 X93.493 Y140.071 E21.21120 ; perimeter
 G1 X92.071 Y139.532 E21.25638 ; perimeter
 G1 X91.100 Y138.436 E21.29984 ; perimeter
 G1 X90.723 Y136.906 E21.34661 ; perimeter
 G1 X91.216 Y59.929 E23.63223 ; perimeter
 G1 X95.894 Y59.929 E23.77111 ; perimeter
 G1 X95.894 Y69.929 E24.06802 ; perimeter
 G1 X98.206 Y69.929 E24.13668 ; perimeter
 G1 X100.242 Y82.100 E24.50310 ; perimeter
 G1 X99.527 Y82.100 E24.52433 ; perimeter
 G1 X97.718 Y70.300 E24.87878 ; perimeter
 G1 X92.174 Y70.300 E25.04338 ; perimeter
 G1 X91.893 Y118.114 E26.46304 ; perimeter
 G1 X92.216 Y119.540 E26.50646 ; perimeter
 G1 X93.195 Y120.746 E26.55258 ; perimeter
 G1 X94.561 Y121.311 E26.59649 ; perimeter
 G1 X101.678 Y121.311 E26.80780 ; perimeter
 G1 X103.021 Y121.133 E26.84802 ; perimeter
 G1 X104.257 Y120.203 E26.89396 ; perimeter
 G1 X104.933 Y118.797 E26.94026 ; perimeter
 G1 X104.933 Y117.371 E26.98263 ; perimeter
 G1 X104.099 Y111.929 E27.14609 ; perimeter
 G1 X105.230 Y111.929 E27.17966 ; perimeter
 G1 X107.098 Y123.100 E27.51597 ; perimeter
 G1 X94.954 Y123.100 E27.87655 ; perimeter
 G1 X94.537 Y122.743 F12000.000 ; move to first perimeter point
 G1 X94.537 Y133.286 E28.18957 F7200.000 ; perimeter
 G1 X97.737 Y133.286 E28.28459 ; perimeter
 G1 X97.737 Y137.086 E28.39741 ; perimeter
 G1 X99.411 Y137.086 E28.44712 ; perimeter
 G1 X99.411 Y139.714 E28.52516 ; perimeter
 G1 X93.559 Y139.714 E28.69892 ; perimeter
 G1 X92.280 Y139.229 E28.73954 ; perimeter
 G1 X91.426 Y138.265 E28.77778 ; perimeter
 G1 X91.080 Y136.864 E28.82061 ; perimeter
 G1 X91.571 Y60.286 E31.09437 ; perimeter
 G1 X95.537 Y60.286 E31.21212 ; perimeter
 G1 X95.537 Y69.943 E31.49886 ; perimeter
 G1 X91.819 Y69.943 E31.60924 ; perimeter
 G1 X91.536 Y118.153 E33.04067 ; perimeter
 G1 X91.886 Y119.700 E33.08777 ; perimeter
 G1 X92.975 Y121.041 E33.13906 ; perimeter
 G1 X94.490 Y121.668 E33.18777 ; perimeter
 G1 X101.702 Y121.668 E33.40188 ; perimeter
 G1 X103.161 Y121.475 E33.44559 ; perimeter
 G1 X104.541 Y120.436 E33.49689 ; perimeter
 G1 X105.290 Y118.879 E33.54819 ; perimeter
 G1 X105.290 Y117.343 E33.59378 ; perimeter
 G1 X104.515 Y112.286 E33.74570 ; perimeter
 G1 X104.928 Y112.286 E33.75795 ; perimeter
 G1 X106.677 Y122.743 E34.07276 ; perimeter
 G1 X94.597 Y122.743 E34.43142 ; perimeter
 G1 F9600
 G1 X94.537 Y133.286 E31.92754 ; wipe and retract
 G1 F9600
 G1 X97.737 Y133.286 E31.16754 ; wipe and retract
 G1 F9600
 G1 X97.737 Y137.086 E30.26504 ; wipe and retract
 G1 F9600
 G1 X99.411 Y137.086 E29.86742 ; wipe and retract
 G1 F9600
 G1 X99.411 Y137.869 E29.68142 ; wipe and retract
 G1 E29.43142 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.200 F12000.000 ; lift Z
 G1 X95.180 Y69.586 F12000.000 ; move to first perimeter point
 G1 Z7.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.869 Y69.586 E5.09831 F7200.000 ; perimeter
 G1 X91.926 Y60.643 E5.36386 ; perimeter
 G1 X95.180 Y60.643 E5.46047 ; perimeter
 G1 X95.180 Y69.526 E5.72422 ; perimeter
 G1 X94.823 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.228 Y69.229 E5.80126 F7200.000 ; perimeter
 G1 X92.281 Y61.000 E6.04560 ; perimeter
 G1 X94.823 Y61.000 E6.12108 ; perimeter
 G1 X94.823 Y69.169 E6.36363 ; perimeter
 G1 F9600
 G1 X92.228 Y69.229 E5.74724 ; wipe and retract
 G1 F9600
 G1 X92.281 Y61.000 E3.79276 ; wipe and retract
 G1 F9600
 G1 X94.823 Y61.000 E3.18906 ; wipe and retract
 G1 F9600
 G1 X94.823 Y67.633 E1.61363 ; wipe and retract
 G1 E1.36363 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.200 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z7.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X99.054 Y137.443 E5.59177 ; perimeter
 G1 X99.054 Y139.357 E5.64861 ; perimeter
 G1 X93.624 Y139.357 E5.80982 ; perimeter
 G1 X92.488 Y138.926 E5.84589 ; perimeter
 G1 X91.751 Y138.094 E5.87890 ; perimeter
 G1 X91.438 Y136.822 E5.91780 ; perimeter
 G1 X91.546 Y119.849 E6.42176 ; perimeter
 G1 X92.754 Y121.337 E6.47866 ; perimeter
 G1 X94.419 Y122.025 E6.53216 ; perimeter
 G1 X101.725 Y122.025 E6.74908 ; perimeter
 G1 X103.301 Y121.817 E6.79627 ; perimeter
 G1 X104.825 Y120.669 E6.85293 ; perimeter
 G1 X105.561 Y119.141 E6.90326 ; perimeter
 G1 X105.716 Y119.163 E6.90792 ; perimeter
 G1 X106.255 Y122.386 E7.00495 ; perimeter
 G1 X94.240 Y122.386 E7.36169 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E7.36627 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E7.41469 ; perimeter
 G1 X105.394 Y120.311 E7.43417 ; perimeter
 G1 X105.549 Y120.333 E7.43883 ; perimeter
 G1 X105.833 Y122.029 E7.48990 ; perimeter
 G1 X103.916 Y122.029 E7.54683 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E7.50351 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.11615 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E6.96033 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E6.92309 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E6.51459 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.05919 ; wipe and retract
 G1 E2.54683 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.200 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z7.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X98.697 Y137.800 E5.25755 ; perimeter
 G1 X98.697 Y139.000 E5.29318 ; perimeter
 G1 X93.690 Y139.000 E5.44185 ; perimeter
 G1 X92.697 Y138.624 E5.47336 ; perimeter
 G1 X92.077 Y137.923 E5.50114 ; perimeter
 G1 X91.795 Y136.780 E5.53611 ; perimeter
 G1 X91.897 Y120.847 E6.00917 ; perimeter
 G1 X92.534 Y121.632 E6.03919 ; perimeter
 G1 X93.823 Y122.165 E6.08058 ; perimeter
 G1 X93.823 Y133.940 E6.43020 ; perimeter
 G1 X94.021 Y134.201 F12000.000 ; move to first infill point
 G1 X94.021 Y138.779 E6.66330 F7200.000 ; infill
 G1 X94.634 Y138.779 E6.69449 ; infill
 G1 X94.634 Y134.201 E6.92759 ; infill
 G1 X95.246 Y134.201 E6.95878 ; infill
 G1 X95.246 Y138.779 E7.19188 ; infill
 G1 X95.859 Y138.779 E7.22307 ; infill
 G1 X95.859 Y134.201 E7.45617 ; infill
 G1 X96.471 Y134.201 E7.48736 ; infill
 G1 X96.471 Y138.779 E7.72046 ; infill
 G1 X97.083 Y138.001 E7.77085 ; infill
 G1 X97.083 Y138.779 E7.81043 ; infill
 G1 X97.696 Y138.779 E7.84162 ; infill
 G1 X97.696 Y138.001 E7.88120 ; infill
 G1 X98.308 Y138.001 E7.91239 ; infill
 G1 X98.308 Y138.779 E7.95197 ; infill
 G1 X93.409 Y138.666 F12000.000 ; move to first infill point
 G1 X93.409 Y122.225 E8.78925 F7200.000 ; infill
 G1 X92.796 Y121.972 E8.82300 ; infill
 G1 X92.796 Y138.347 E9.65689 ; infill
 G1 X92.184 Y136.985 F12000.000 ; move to first infill point
 G1 X92.184 Y133.448 E9.83700 F7200.000 ; infill
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X100.304 Y132.615 E9.94239 F1800.000 ; infill
 G1 F9600
 G1 X98.630 Y132.615 E9.54477 ; wipe and retract
 G1 E4.94239 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.200 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z7.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X104.774 Y121.808 F12000.000 ; move to first infill point
 G1 X104.774 Y121.449 E5.07163 F7200.000 ; infill
 G1 X105.374 Y121.352 E5.10194 ; infill
 G1 X105.374 Y121.808 E5.12466 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.931 E5.19069 F1800.000 ; infill
 G1 X105.579 Y117.931 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.20886 F1800.000 ; infill
 G1 X104.750 Y112.464 E5.35489 ; infill
 G1 F9600
 G1 X105.528 Y117.321 E4.18681 ; wipe and retract
 G1 F9600
 G1 X105.579 Y117.931 E4.04146 ; wipe and retract
 G1 E0.35489 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.200 F12000.000 ; lift Z
 G1 X91.388 Y118.357 F12000.000 ; move to first infill point
 G1 Z7.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.491 Y119.308 E5.02840 F1800.000 ; infill
 G1 X91.703 Y119.744 E5.04280 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E4.92765 ; wipe and retract
 G1 F9600
 G1 X91.388 Y118.357 E4.70044 ; wipe and retract
 G1 E0.04280 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.200 F12000.000 ; lift Z
 G1 X99.855 Y81.922 F12000.000 ; move to first infill point
 G1 Z7.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.594 Y74.053 E5.50170 F1800.000 ; infill
 G1 X97.962 Y70.107 E5.62034 F1800.000 ; infill
 G1 X94.434 Y69.008 F12000.000 ; move to first infill point
 G1 X94.434 Y61.221 E6.01207 F7200.000 ; infill
 G1 X93.829 Y61.221 E6.04251 ; infill
 G1 X93.829 Y69.008 E6.43425 ; infill
 G1 X93.224 Y69.008 E6.46469 ; infill
 G1 X93.224 Y61.221 E6.85642 ; infill
 G1 X92.619 Y65.554 F12000.000 ; move to first infill point
 G1 X92.619 Y69.008 E7.03018 F7200.000 ; infill
 G1 F9600
 G1 X92.619 Y65.554 E6.20988 ; wipe and retract
 G1 E2.03018 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.200 F12000.000 ; lift Z
 G1 X99.012 Y83.879 F12000.000 ; move to first support material interface point
 G1 Z7.300 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.445 Y83.930 E5.03800 F1680.000 ; support material interface
 G1 X98.516 Y84.522 E5.07788 ; support material interface
 G1 X101.980 Y84.215 E5.31023 ; support material interface
 G1 X102.079 Y84.806 E5.35022 ; support material interface
 G1 X98.607 Y85.114 E5.58311 ; support material interface
 G1 X98.697 Y85.705 E5.62306 ; support material interface
 G1 X102.178 Y85.396 E5.85649 ; support material interface
 G1 X102.277 Y85.986 E5.89648 ; support material interface
 G1 X98.788 Y86.296 E6.13045 ; support material interface
 G1 X98.878 Y86.887 E6.17040 ; support material interface
 G1 X102.375 Y86.577 E6.40493 ; support material interface
 G1 X102.474 Y87.167 E6.44491 ; support material interface
 G1 X98.969 Y87.478 E6.67998 ; support material interface
 G1 X99.060 Y88.069 E6.71993 ; support material interface
 G1 X102.573 Y87.757 E6.95554 ; support material interface
 G1 X102.651 Y88.350 E6.99545 ; support material interface
 G1 X102.085 Y88.400 E7.03345 ; support material interface
 G1 X102.388 Y90.149 F12000.000 ; move to first support material interface point
 G1 X102.934 Y90.101 E7.07004 F1680.000 ; support material interface
 G1 X102.859 Y89.534 E7.10822 ; support material interface
 G1 X99.343 Y89.846 E7.34405 ; support material interface
 G1 X99.276 Y89.279 E7.38220 ; support material interface
 G1 X99.822 Y89.230 E7.41879 ; support material interface
 M106 S239.7 ; enable fan
 G1 F9600
 G1 X99.276 Y89.279 E7.28872 ; wipe and retract
 G1 F9600
 G1 X99.343 Y89.846 E7.15307 ; wipe and retract
 G1 F9600
 G1 X102.859 Y89.534 E6.31466 ; wipe and retract
 G1 F9600
 G1 X102.934 Y90.101 E6.17895 ; wipe and retract
 G1 F9600
 G1 X102.388 Y90.149 E6.04887 ; wipe and retract
 G1 E2.41879 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.300 F12000.000 ; lift Z
 G1 X104.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z7.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X102.787 Y133.015 E5.05999 F7200.000 ; perimeter
 G1 X102.787 Y132.215 E5.08375 ; perimeter
 G1 X109.346 Y132.215 E5.27849 ; perimeter
 G1 X109.992 Y136.074 E5.39467 ; perimeter
 G1 X109.992 Y137.923 E5.44956 ; perimeter
 G1 X109.148 Y139.531 E5.50348 ; perimeter
 G1 X107.653 Y140.562 E5.55740 ; perimeter
 G1 X105.814 Y140.785 E5.61242 ; perimeter
 G1 X102.787 Y140.785 E5.70227 ; perimeter
 G1 X102.787 Y136.015 E5.84392 ; perimeter
 G1 X104.808 Y136.015 E5.90392 ; perimeter
 G1 X104.808 Y133.075 E5.99121 ; perimeter
 G1 X104.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X105.165 Y136.372 F12000.000 ; move to first perimeter point
 G1 X105.165 Y132.572 E6.10404 F7200.000 ; perimeter
 G1 X109.044 Y132.572 E6.21921 ; perimeter
 G1 X109.635 Y136.104 E6.32553 ; perimeter
 G1 X109.635 Y137.835 E6.37693 ; perimeter
 G1 X108.873 Y139.287 E6.42562 ; perimeter
 G1 X107.523 Y140.218 E6.47431 ; perimeter
 G1 X105.792 Y140.428 E6.52608 ; perimeter
 G1 X103.145 Y140.428 E6.60469 ; perimeter
 G1 X103.145 Y136.372 E6.72514 ; perimeter
 G1 X105.105 Y136.372 E6.78335 ; perimeter
 G1 X105.522 Y136.729 F12000.000 ; move to first perimeter point
 G1 X105.522 Y132.929 E6.89618 F7200.000 ; perimeter
 G1 X108.742 Y132.929 E6.99177 ; perimeter
 G1 X109.278 Y136.133 E7.08824 ; perimeter
 G1 X109.278 Y137.747 E7.13614 ; perimeter
 G1 X108.597 Y139.043 E7.17960 ; perimeter
 G1 X107.393 Y139.874 E7.22307 ; perimeter
 G1 X105.771 Y140.071 E7.27158 ; perimeter
 G1 X103.502 Y140.071 E7.33895 ; perimeter
 G1 X103.502 Y136.729 E7.43819 ; perimeter
 G1 X105.462 Y136.729 E7.49640 ; perimeter
 G1 X105.879 Y137.086 F12000.000 ; move to first perimeter point
 G1 X105.879 Y133.286 E7.60923 F7200.000 ; perimeter
 G1 X108.440 Y133.286 E7.68525 ; perimeter
 G1 X108.921 Y136.163 E7.77186 ; perimeter
 G1 X108.921 Y137.659 E7.81626 ; perimeter
 G1 X108.322 Y138.799 E7.85450 ; perimeter
 G1 X107.262 Y139.530 E7.89274 ; perimeter
 G1 X105.749 Y139.714 E7.93800 ; perimeter
 G1 X103.859 Y139.714 E7.99413 ; perimeter
 G1 X103.859 Y137.086 E8.07216 ; perimeter
 G1 X105.819 Y137.086 E8.13038 ; perimeter
 G1 X106.236 Y137.443 F12000.000 ; move to first perimeter point
 G1 X106.236 Y133.643 E8.24320 F7200.000 ; perimeter
 G1 X108.137 Y133.643 E8.29964 ; perimeter
 G1 X108.564 Y136.193 E8.37639 ; perimeter
 G1 X108.564 Y137.571 E8.41731 ; perimeter
 G1 X108.047 Y138.555 E8.45032 ; perimeter
 G1 X107.132 Y139.187 E8.48333 ; perimeter
 G1 X105.728 Y139.357 E8.52533 ; perimeter
 G1 X104.216 Y139.357 E8.57022 ; perimeter
 G1 X104.216 Y137.443 E8.62705 ; perimeter
 G1 X106.176 Y137.443 E8.68526 ; perimeter
 G1 X106.593 Y137.800 F12000.000 ; move to first perimeter point
 G1 X106.593 Y134.000 E8.79809 F7200.000 ; perimeter
 G1 X107.835 Y134.000 E8.83495 ; perimeter
 G1 X108.207 Y136.222 E8.90184 ; perimeter
 G1 X108.207 Y137.482 E8.93926 ; perimeter
 G1 X107.772 Y138.311 E8.96705 ; perimeter
 G1 X107.001 Y138.843 E8.99484 ; perimeter
 G1 X105.706 Y139.000 E9.03358 ; perimeter
 G1 X104.573 Y139.000 E9.06723 ; perimeter
 G1 X104.573 Y137.800 E9.10285 ; perimeter
 G1 X106.533 Y137.800 E9.16107 ; perimeter
 G1 X104.794 Y138.611 F12000.000 ; move to first infill point
 G1 X106.015 Y138.611 E9.22233 F7200.000 ; infill
 G1 X106.795 Y138.008 E9.27177 ; infill
 G1 X107.681 Y138.008 E9.31624 ; infill
 G1 X107.985 Y137.405 E9.35012 ; infill
 G1 X106.795 Y137.405 E9.40983 ; infill
 G1 X106.795 Y136.802 E9.44009 ; infill
 G1 X107.985 Y136.802 E9.49980 ; infill
 G1 X107.985 Y136.198 E9.53006 ; infill
 G1 X106.795 Y136.198 E9.58977 ; infill
 G1 X106.795 Y135.595 E9.62003 ; infill
 G1 X107.895 Y135.595 E9.67523 ; infill
 G1 X107.794 Y134.992 E9.70591 ; infill
 G1 X106.795 Y134.992 E9.75604 ; infill
 G1 X106.795 Y134.388 E9.78630 ; infill
 G1 X107.693 Y134.388 E9.83137 ; infill
 G1 X104.987 Y132.615 F12000.000 ; move to first infill point
 G1 X102.966 Y132.615 E9.95857 F1800.000 ; infill
 G1 F9600
 G1 X104.987 Y132.615 E9.47868 ; wipe and retract
 G1 E4.95857 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.400 F12000.000 ; lift Z
 G1 X104.430 Y102.815 F12000.000 ; move to first perimeter point
 G1 Z7.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X101.979 Y102.815 E5.07276 F7200.000 ; perimeter
 G1 X100.201 Y91.215 E5.42120 ; perimeter
 G1 X102.490 Y91.215 E5.48916 ; perimeter
 G1 X104.420 Y102.755 E5.83658 ; perimeter
 G1 X104.073 Y102.634 F12000.000 ; move inwards before travel
 G1 X104.008 Y102.458 F12000.000 ; move to first perimeter point
 G1 X102.286 Y102.458 E5.88771 F7200.000 ; perimeter
 G1 X100.617 Y91.572 E6.21470 ; perimeter
 G1 X102.188 Y91.572 E6.26133 ; perimeter
 G1 X103.998 Y102.398 E6.58725 ; perimeter
 G1 X103.586 Y102.100 F12000.000 ; move to first perimeter point
 G1 X102.593 Y102.100 E6.61677 F7200.000 ; perimeter
 G1 X101.033 Y91.929 E6.92230 ; perimeter
 G1 X101.885 Y91.929 E6.94761 ; perimeter
 G1 X103.577 Y102.041 E7.25203 ; perimeter
 G1 X103.165 Y101.743 F12000.000 ; move to first perimeter point
 G1 X102.899 Y101.743 E7.25992 F7200.000 ; perimeter
 G1 X102.350 Y98.160 E7.36755 ; perimeter
 G1 X102.560 Y98.127 E7.37387 ; perimeter
 G1 X103.155 Y101.684 E7.48097 ; perimeter
 G1 X102.427 Y97.967 F12000.000 ; move to first infill point
 G1 X101.487 Y92.107 E7.85455 F1800.000 ; infill
 G1 F9600
 G1 X102.427 Y97.967 E6.44510 ; wipe and retract
 G1 E2.85455 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.400 F12000.000 ; lift Z
 G1 X95.608 Y123.815 F12000.000 ; move to first perimeter point
 G1 Z7.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X95.608 Y132.215 E5.24941 F7200.000 ; perimeter
 G1 X100.829 Y132.215 E5.40441 ; perimeter
 G1 X100.829 Y133.015 E5.42817 ; perimeter
 G1 X98.808 Y133.015 E5.48816 ; perimeter
 G1 X98.808 Y136.015 E5.57723 ; perimeter
 G1 X100.829 Y136.015 E5.63723 ; perimeter
 G1 X100.829 Y140.785 E5.77888 ; perimeter
 G1 X93.363 Y140.785 E6.00056 ; perimeter
 G1 X91.653 Y140.137 E6.05485 ; perimeter
 G1 X90.449 Y138.778 E6.10877 ; perimeter
 G1 X90.008 Y136.991 E6.16341 ; perimeter
 G1 X90.507 Y59.215 E8.47274 ; perimeter
 G1 X96.608 Y59.215 E8.65389 ; perimeter
 G1 X96.608 Y69.215 E8.95080 ; perimeter
 G1 X98.811 Y69.215 E9.01621 ; perimeter
 G1 X101.085 Y82.815 E9.42562 ; perimeter
 G1 X98.914 Y82.815 E9.49010 ; perimeter
 G1 X97.105 Y71.015 E9.84455 ; perimeter
 G1 X92.884 Y71.015 E9.96987 ; perimeter
 G1 X92.608 Y118.036 E11.36603 ; perimeter
 G1 X92.875 Y119.220 E11.40204 ; perimeter
 G1 X93.635 Y120.155 E11.43783 ; perimeter
 G1 X94.703 Y120.597 E11.47215 ; perimeter
 G1 X101.631 Y120.597 E11.67785 ; perimeter
 G1 X102.742 Y120.450 E11.71111 ; perimeter
 G1 X103.689 Y119.737 E11.74632 ; perimeter
 G1 X104.219 Y118.635 E11.78263 ; perimeter
 G1 X104.219 Y117.425 E11.81855 ; perimeter
 G1 X103.267 Y111.215 E12.00509 ; perimeter
 G1 X105.835 Y111.215 E12.08133 ; perimeter
 G1 X107.942 Y123.815 E12.46063 ; perimeter
 G1 X95.668 Y123.815 E12.82505 ; perimeter
 G1 X95.208 Y123.815 F12000.000 ; move inwards before travel
 G1 X95.251 Y123.458 F12000.000 ; move to first perimeter point
 G1 X95.251 Y132.572 E13.09566 F7200.000 ; perimeter
 G1 X98.451 Y132.572 E13.19068 ; perimeter
 G1 X98.451 Y136.372 E13.30350 ; perimeter
 G1 X100.472 Y136.372 E13.36350 ; perimeter
 G1 X100.472 Y140.428 E13.48394 ; perimeter
 G1 X93.428 Y140.428 E13.69308 ; perimeter
 G1 X91.862 Y139.834 E13.74281 ; perimeter
 G1 X90.774 Y138.607 E13.79150 ; perimeter
 G1 X90.366 Y136.949 E13.84221 ; perimeter
 G1 X90.862 Y59.572 E16.13968 ; perimeter
 G1 X96.251 Y59.572 E16.29970 ; perimeter
 G1 X96.251 Y69.572 E16.59661 ; perimeter
 G1 X98.509 Y69.572 E16.66365 ; perimeter
 G1 X100.664 Y82.458 E17.05156 ; perimeter
 G1 X99.220 Y82.458 E17.09441 ; perimeter
 G1 X97.411 Y70.658 E17.44886 ; perimeter
 G1 X92.529 Y70.658 E17.59382 ; perimeter
 G1 X92.251 Y118.075 E19.00173 ; perimeter
 G1 X92.545 Y119.380 E19.04145 ; perimeter
 G1 X93.415 Y120.451 E19.08240 ; perimeter
 G1 X94.632 Y120.954 E19.12152 ; perimeter
 G1 X101.655 Y120.954 E19.33002 ; perimeter
 G1 X102.881 Y120.792 E19.36676 ; perimeter
 G1 X103.973 Y119.970 E19.40734 ; perimeter
 G1 X104.576 Y118.716 E19.44864 ; perimeter
 G1 X104.576 Y117.398 E19.48778 ; perimeter
 G1 X103.683 Y111.572 E19.66279 ; perimeter
 G1 X105.532 Y111.572 E19.71769 ; perimeter
 G1 X107.520 Y123.458 E20.07550 ; perimeter
 G1 X95.311 Y123.458 E20.43800 ; perimeter
 G1 X94.894 Y123.100 F12000.000 ; move to first perimeter point
 G1 X94.894 Y132.929 E20.72982 F7200.000 ; perimeter
 G1 X98.094 Y132.929 E20.82483 ; perimeter
 G1 X98.094 Y136.729 E20.93765 ; perimeter
 G1 X100.115 Y136.729 E20.99765 ; perimeter
 G1 X100.115 Y140.071 E21.09689 ; perimeter
 G1 X93.493 Y140.071 E21.29348 ; perimeter
 G1 X92.071 Y139.532 E21.33866 ; perimeter
 G1 X91.100 Y138.436 E21.38212 ; perimeter
 G1 X90.723 Y136.906 E21.42889 ; perimeter
 G1 X91.216 Y59.929 E23.71451 ; perimeter
 G1 X95.894 Y59.929 E23.85339 ; perimeter
 G1 X95.894 Y69.929 E24.15030 ; perimeter
 G1 X98.206 Y69.929 E24.21896 ; perimeter
 G1 X100.242 Y82.100 E24.58538 ; perimeter
 G1 X99.527 Y82.100 E24.60661 ; perimeter
 G1 X97.718 Y70.300 E24.96106 ; perimeter
 G1 X92.174 Y70.300 E25.12566 ; perimeter
 G1 X91.893 Y118.114 E26.54532 ; perimeter
 G1 X92.216 Y119.540 E26.58874 ; perimeter
 G1 X93.195 Y120.746 E26.63486 ; perimeter
 G1 X94.561 Y121.311 E26.67877 ; perimeter
 G1 X101.678 Y121.311 E26.89008 ; perimeter
 G1 X103.021 Y121.133 E26.93030 ; perimeter
 G1 X104.257 Y120.203 E26.97624 ; perimeter
 G1 X104.933 Y118.797 E27.02254 ; perimeter
 G1 X104.933 Y117.371 E27.06491 ; perimeter
 G1 X104.099 Y111.929 E27.22837 ; perimeter
 G1 X105.230 Y111.929 E27.26194 ; perimeter
 G1 X107.098 Y123.100 E27.59825 ; perimeter
 G1 X94.954 Y123.100 E27.95883 ; perimeter
 G1 X94.537 Y122.743 F12000.000 ; move to first perimeter point
 G1 X94.537 Y133.286 E28.27185 F7200.000 ; perimeter
 G1 X97.737 Y133.286 E28.36687 ; perimeter
 G1 X97.737 Y137.086 E28.47969 ; perimeter
 G1 X99.757 Y137.086 E28.53969 ; perimeter
 G1 X99.757 Y139.714 E28.61772 ; perimeter
 G1 X93.559 Y139.714 E28.80177 ; perimeter
 G1 X92.280 Y139.229 E28.84239 ; perimeter
 G1 X91.426 Y138.265 E28.88063 ; perimeter
 G1 X91.080 Y136.864 E28.92347 ; perimeter
 G1 X91.571 Y60.286 E31.19722 ; perimeter
 G1 X95.537 Y60.286 E31.31497 ; perimeter
 G1 X95.537 Y69.943 E31.60171 ; perimeter
 G1 X91.819 Y69.943 E31.71209 ; perimeter
 G1 X91.536 Y118.153 E33.14352 ; perimeter
 G1 X91.886 Y119.700 E33.19062 ; perimeter
 G1 X92.975 Y121.041 E33.24191 ; perimeter
 G1 X94.490 Y121.668 E33.29062 ; perimeter
 G1 X101.702 Y121.668 E33.50473 ; perimeter
 G1 X103.161 Y121.475 E33.54844 ; perimeter
 G1 X104.541 Y120.436 E33.59974 ; perimeter
 G1 X105.290 Y118.879 E33.65104 ; perimeter
 G1 X105.290 Y117.343 E33.69663 ; perimeter
 G1 X104.515 Y112.286 E33.84855 ; perimeter
 G1 X104.928 Y112.286 E33.86080 ; perimeter
 G1 X106.677 Y122.743 E34.17561 ; perimeter
 G1 X94.597 Y122.743 E34.53427 ; perimeter
 G1 F9600
 G1 X94.537 Y133.286 E32.03039 ; wipe and retract
 G1 F9600
 G1 X97.737 Y133.286 E31.27039 ; wipe and retract
 G1 F9600
 G1 X97.737 Y137.086 E30.36789 ; wipe and retract
 G1 F9600
 G1 X99.757 Y137.086 E29.88800 ; wipe and retract
 G1 F9600
 G1 X99.757 Y137.523 E29.78427 ; wipe and retract
 G1 E29.53427 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.400 F12000.000 ; lift Z
 G1 X95.180 Y69.586 F12000.000 ; move to first perimeter point
 G1 Z7.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.869 Y69.586 E5.09831 F7200.000 ; perimeter
 G1 X91.926 Y60.643 E5.36386 ; perimeter
 G1 X95.180 Y60.643 E5.46047 ; perimeter
 G1 X95.180 Y69.526 E5.72422 ; perimeter
 G1 X94.823 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.228 Y69.229 E5.80126 F7200.000 ; perimeter
 G1 X92.281 Y61.000 E6.04560 ; perimeter
 G1 X94.823 Y61.000 E6.12108 ; perimeter
 G1 X94.823 Y69.169 E6.36363 ; perimeter
 G1 F9600
 G1 X92.228 Y69.229 E5.74724 ; wipe and retract
 G1 F9600
 G1 X92.281 Y61.000 E3.79276 ; wipe and retract
 G1 F9600
 G1 X94.823 Y61.000 E3.18906 ; wipe and retract
 G1 F9600
 G1 X94.823 Y67.633 E1.61363 ; wipe and retract
 G1 E1.36363 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.400 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z7.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X99.400 Y137.443 E5.60206 ; perimeter
 G1 X99.400 Y139.357 E5.65889 ; perimeter
 G1 X93.624 Y139.357 E5.83039 ; perimeter
 G1 X92.488 Y138.926 E5.86646 ; perimeter
 G1 X91.751 Y138.094 E5.89947 ; perimeter
 G1 X91.438 Y136.822 E5.93837 ; perimeter
 G1 X91.546 Y119.849 E6.44233 ; perimeter
 G1 X92.754 Y121.337 E6.49923 ; perimeter
 G1 X94.419 Y122.025 E6.55273 ; perimeter
 G1 X101.725 Y122.025 E6.76965 ; perimeter
 G1 X103.301 Y121.817 E6.81684 ; perimeter
 G1 X104.825 Y120.669 E6.87350 ; perimeter
 G1 X105.561 Y119.141 E6.92384 ; perimeter
 G1 X105.716 Y119.163 E6.92849 ; perimeter
 G1 X106.255 Y122.386 E7.02552 ; perimeter
 G1 X94.240 Y122.386 E7.38226 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E7.38684 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E7.43526 ; perimeter
 G1 X105.394 Y120.311 E7.45474 ; perimeter
 G1 X105.549 Y120.333 E7.45940 ; perimeter
 G1 X105.833 Y122.029 E7.51047 ; perimeter
 G1 X103.916 Y122.029 E7.56740 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E7.52408 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.13672 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E6.98090 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E6.94366 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E6.53516 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.07976 ; wipe and retract
 G1 E2.56740 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.400 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z7.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X99.043 Y137.800 E5.26783 ; perimeter
 G1 X99.043 Y139.000 E5.30346 ; perimeter
 G1 X93.690 Y139.000 E5.46242 ; perimeter
 G1 X92.697 Y138.624 E5.49393 ; perimeter
 G1 X92.077 Y137.923 E5.52171 ; perimeter
 G1 X91.795 Y136.780 E5.55668 ; perimeter
 G1 X91.897 Y120.847 E6.02974 ; perimeter
 G1 X92.534 Y121.632 E6.05976 ; perimeter
 G1 X93.823 Y122.165 E6.10115 ; perimeter
 G1 X93.823 Y133.940 E6.45077 ; perimeter
 G1 X93.621 Y134.011 F12000.000 ; move to first infill point
 G1 X92.017 Y134.011 E6.52750 F7200.000 ; infill
 G1 X92.018 Y133.436 E6.55500 ; infill
 G1 X93.621 Y133.436 E6.63168 ; infill
 G1 X93.621 Y132.860 E6.65918 ; infill
 G1 X92.022 Y132.860 E6.73568 ; infill
 G1 X92.025 Y132.285 E6.76318 ; infill
 G1 X93.621 Y132.285 E6.83951 ; infill
 G1 X93.621 Y131.710 E6.86701 ; infill
 G1 X92.029 Y131.710 E6.94316 ; infill
 G1 X92.033 Y131.135 E6.97066 ; infill
 G1 X93.621 Y131.135 E7.04663 ; infill
 G1 X93.621 Y130.560 E7.07413 ; infill
 G1 X92.036 Y130.560 E7.14993 ; infill
 G1 X92.040 Y129.985 E7.17743 ; infill
 G1 X93.621 Y129.985 E7.25305 ; infill
 G1 X93.621 Y129.410 E7.28055 ; infill
 G1 X92.044 Y129.410 E7.35599 ; infill
 G1 X92.047 Y128.835 E7.38349 ; infill
 G1 X93.621 Y128.835 E7.45876 ; infill
 G1 X93.621 Y128.260 E7.48626 ; infill
 G1 X92.051 Y128.260 E7.56135 ; infill
 G1 X92.055 Y127.685 E7.58886 ; infill
 G1 X93.621 Y127.685 E7.66377 ; infill
 G1 X93.621 Y127.109 E7.69127 ; infill
 G1 X92.058 Y127.109 E7.76601 ; infill
 G1 X92.062 Y126.534 E7.79351 ; infill
 G1 X93.621 Y126.534 E7.86807 ; infill
 G1 X93.621 Y125.959 E7.89557 ; infill
 G1 X92.066 Y125.959 E7.96996 ; infill
 G1 X92.069 Y125.384 E7.99746 ; infill
 G1 X93.621 Y125.384 E8.07167 ; infill
 G1 X93.621 Y124.809 E8.09917 ; infill
 G1 X92.073 Y124.809 E8.17320 ; infill
 G1 X92.077 Y124.234 E8.20071 ; infill
 G1 X93.621 Y124.234 E8.27456 ; infill
 G1 X93.621 Y123.659 E8.30206 ; infill
 G1 X92.081 Y123.659 E8.37574 ; infill
 G1 X92.084 Y123.084 E8.40325 ; infill
 G1 X93.621 Y123.084 E8.47675 ; infill
 G1 X93.621 Y122.509 E8.50425 ; infill
 G1 X92.088 Y122.509 E8.57758 ; infill
 G1 X92.092 Y121.934 E8.60508 ; infill
 G1 X92.472 Y121.934 E8.62325 ; infill
 G1 X92.017 Y134.586 F12000.000 ; move to first infill point
 G1 X96.821 Y134.586 E8.85301 F7200.000 ; infill
 G1 X96.821 Y135.161 E8.88051 ; infill
 G1 X92.017 Y135.161 E9.11027 ; infill
 G1 X92.017 Y135.736 E9.13777 ; infill
 G1 X96.821 Y135.736 E9.36752 ; infill
 G1 X96.821 Y136.311 E9.39502 ; infill
 G1 X92.017 Y136.311 E9.62478 ; infill
 G1 X92.034 Y136.886 E9.65229 ; infill
 G1 X96.821 Y136.886 E9.88124 ; infill
 G1 X96.821 Y137.461 E9.90874 ; infill
 G1 X92.175 Y137.461 E10.13091 ; infill
 G1 X92.502 Y138.036 E10.16254 ; infill
 G1 X96.821 Y138.036 E10.36907 ; infill
 G1 X98.822 Y138.612 F12000.000 ; move to first infill point
 G1 X93.538 Y138.612 E10.62177 F7200.000 ; infill
 G1 X91.703 Y119.744 F12000.000 ; move to first infill point
 G1 X91.491 Y119.308 E10.63617 F1800.000 ; infill
 G1 X91.388 Y118.357 E10.66457 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E10.43736 ; wipe and retract
 G1 F9600
 G1 X91.703 Y119.744 E10.32222 ; wipe and retract
 G1 E5.66457 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.400 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z7.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X105.107 Y121.240 F12000.000 ; move to first infill point
 G1 X105.494 Y121.240 E5.07167 F7200.000 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.931 E5.13770 F1800.000 ; infill
 G1 X105.579 Y117.931 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.15587 F1800.000 ; infill
 G1 X104.750 Y112.464 E5.30190 ; infill
 G1 F9600
 G1 X105.528 Y117.321 E4.13382 ; wipe and retract
 G1 F9600
 G1 X105.579 Y117.931 E3.98847 ; wipe and retract
 G1 E0.30190 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.400 F12000.000 ; lift Z
 G1 X100.650 Y132.615 F12000.000 ; move to first infill point
 G1 Z7.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.630 Y132.615 E5.12720 F1800.000 ; infill
 G1 F9600
 G1 X100.650 Y132.615 E4.64731 ; wipe and retract
 G1 E0.12720 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.400 F12000.000 ; lift Z
 G1 X99.855 Y81.922 F12000.000 ; move to first infill point
 G1 Z7.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.594 Y74.053 E5.50170 F1800.000 ; infill
 G1 X97.962 Y70.107 E5.62034 F1800.000 ; infill
 G1 X94.601 Y68.841 F12000.000 ; move to first infill point
 G1 X92.452 Y68.841 E5.72279 F7200.000 ; infill
 G1 X92.452 Y68.267 E5.75011 ; infill
 G1 X94.601 Y68.267 E5.85257 ; infill
 G1 X94.601 Y67.694 E5.87989 ; infill
 G1 X92.452 Y67.694 E5.98234 ; infill
 G1 X92.452 Y67.121 E6.00967 ; infill
 G1 X94.601 Y67.121 E6.11212 ; infill
 G1 X94.601 Y66.548 E6.13944 ; infill
 G1 X92.452 Y66.548 E6.24189 ; infill
 G1 X92.452 Y65.974 E6.26922 ; infill
 G1 X94.601 Y65.974 E6.37167 ; infill
 G1 X94.601 Y65.401 E6.39899 ; infill
 G1 X92.454 Y65.401 E6.50135 ; infill
 G1 X92.458 Y64.828 E6.52867 ; infill
 G1 X94.601 Y64.828 E6.63085 ; infill
 G1 X94.601 Y64.255 E6.65818 ; infill
 G1 X92.461 Y64.255 E6.76018 ; infill
 G1 X92.465 Y63.681 E6.78750 ; infill
 G1 X94.601 Y63.681 E6.88933 ; infill
 G1 X94.601 Y63.108 E6.91666 ; infill
 G1 X92.469 Y63.108 E7.01831 ; infill
 G1 X92.472 Y62.535 E7.04564 ; infill
 G1 X94.601 Y62.535 E7.14711 ; infill
 G1 X94.601 Y61.962 E7.17444 ; infill
 G1 X92.476 Y61.962 E7.27574 ; infill
 G1 X92.480 Y61.388 E7.30307 ; infill
 G1 X94.601 Y61.388 E7.40419 ; infill
 M106 S237.15 ; enable fan
 G1 F9600
 G1 X92.480 Y61.388 E6.90031 ; wipe and retract
 G1 F9600
 G1 X92.476 Y61.962 E6.76416 ; wipe and retract
 G1 F9600
 G1 X94.601 Y61.962 E6.25941 ; wipe and retract
 G1 F9600
 G1 X94.601 Y62.535 E6.12326 ; wipe and retract
 G1 F9600
 G1 X92.472 Y62.535 E5.61763 ; wipe and retract
 G1 F9600
 G1 X92.469 Y63.108 E5.48148 ; wipe and retract
 G1 F9600
 G1 X94.601 Y63.108 E4.97498 ; wipe and retract
 G1 F9600
 G1 X94.601 Y63.681 E4.83884 ; wipe and retract
 G1 F9600
 G1 X92.465 Y63.681 E4.33146 ; wipe and retract
 G1 F9600
 G1 X92.461 Y64.255 E4.19531 ; wipe and retract
 G1 F9600
 G1 X94.601 Y64.255 E3.68707 ; wipe and retract
 G1 F9600
 G1 X94.601 Y64.828 E3.55092 ; wipe and retract
 G1 F9600
 G1 X92.458 Y64.828 E3.04180 ; wipe and retract
 G1 F9600
 G1 X92.454 Y65.401 E2.90565 ; wipe and retract
 G1 F9600
 G1 X93.513 Y65.401 E2.65419 ; wipe and retract
 G1 E2.40419 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.400 F12000.000 ; lift Z
 G1 X104.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z7.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X102.441 Y133.015 E5.07028 F7200.000 ; perimeter
 G1 X102.441 Y132.215 E5.09403 ; perimeter
 G1 X109.346 Y132.215 E5.29906 ; perimeter
 G1 X109.992 Y136.074 E5.41524 ; perimeter
 G1 X109.992 Y137.923 E5.47013 ; perimeter
 G1 X109.148 Y139.531 E5.52405 ; perimeter
 G1 X107.653 Y140.562 E5.57797 ; perimeter
 G1 X105.814 Y140.785 E5.63299 ; perimeter
 G1 X102.441 Y140.785 E5.73313 ; perimeter
 G1 X102.441 Y136.015 E5.87478 ; perimeter
 G1 X104.808 Y136.015 E5.94506 ; perimeter
 G1 X104.808 Y133.075 E6.03235 ; perimeter
 G1 X104.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X105.165 Y136.372 F12000.000 ; move to first perimeter point
 G1 X105.165 Y132.572 E6.14518 F7200.000 ; perimeter
 G1 X109.044 Y132.572 E6.26035 ; perimeter
 G1 X109.635 Y136.104 E6.36667 ; perimeter
 G1 X109.635 Y137.835 E6.41807 ; perimeter
 G1 X108.873 Y139.287 E6.46676 ; perimeter
 G1 X107.523 Y140.218 E6.51545 ; perimeter
 G1 X105.792 Y140.428 E6.56722 ; perimeter
 G1 X102.798 Y140.428 E6.65612 ; perimeter
 G1 X102.798 Y136.372 E6.77656 ; perimeter
 G1 X105.105 Y136.372 E6.84506 ; perimeter
 G1 X105.522 Y136.729 F12000.000 ; move to first perimeter point
 G1 X105.522 Y132.929 E6.95789 F7200.000 ; perimeter
 G1 X108.742 Y132.929 E7.05348 ; perimeter
 G1 X109.278 Y136.133 E7.14995 ; perimeter
 G1 X109.278 Y137.747 E7.19785 ; perimeter
 G1 X108.597 Y139.043 E7.24131 ; perimeter
 G1 X107.393 Y139.874 E7.28478 ; perimeter
 G1 X105.771 Y140.071 E7.33329 ; perimeter
 G1 X103.155 Y140.071 E7.41095 ; perimeter
 G1 X103.155 Y136.729 E7.51019 ; perimeter
 G1 X105.462 Y136.729 E7.57869 ; perimeter
 G1 X105.879 Y137.086 F12000.000 ; move to first perimeter point
 G1 X105.879 Y133.286 E7.69151 F7200.000 ; perimeter
 G1 X108.440 Y133.286 E7.76753 ; perimeter
 G1 X108.921 Y136.163 E7.85414 ; perimeter
 G1 X108.921 Y137.659 E7.89854 ; perimeter
 G1 X108.322 Y138.799 E7.93678 ; perimeter
 G1 X107.262 Y139.530 E7.97502 ; perimeter
 G1 X105.749 Y139.714 E8.02028 ; perimeter
 G1 X103.512 Y139.714 E8.08669 ; perimeter
 G1 X103.512 Y137.086 E8.16473 ; perimeter
 G1 X105.819 Y137.086 E8.23323 ; perimeter
 G1 X106.236 Y137.443 F12000.000 ; move to first perimeter point
 G1 X106.236 Y133.643 E8.34605 F7200.000 ; perimeter
 G1 X108.137 Y133.643 E8.40249 ; perimeter
 G1 X108.564 Y136.193 E8.47924 ; perimeter
 G1 X108.564 Y137.571 E8.52016 ; perimeter
 G1 X108.047 Y138.555 E8.55317 ; perimeter
 G1 X107.132 Y139.187 E8.58618 ; perimeter
 G1 X105.728 Y139.357 E8.62818 ; perimeter
 G1 X103.869 Y139.357 E8.68335 ; perimeter
 G1 X103.869 Y137.443 E8.74019 ; perimeter
 G1 X106.176 Y137.443 E8.80868 ; perimeter
 G1 X106.593 Y137.800 F12000.000 ; move to first perimeter point
 G1 X106.593 Y134.000 E8.92151 F7200.000 ; perimeter
 G1 X107.835 Y134.000 E8.95837 ; perimeter
 G1 X108.207 Y136.222 E9.02527 ; perimeter
 G1 X108.207 Y137.482 E9.06269 ; perimeter
 G1 X107.772 Y138.311 E9.09047 ; perimeter
 G1 X107.001 Y138.843 E9.11826 ; perimeter
 G1 X105.706 Y139.000 E9.15700 ; perimeter
 G1 X104.226 Y139.000 E9.20093 ; perimeter
 G1 X104.226 Y137.800 E9.23656 ; perimeter
 G1 X106.533 Y137.800 E9.30506 ; perimeter
 G1 X107.818 Y137.597 F12000.000 ; move to first infill point
 G1 X107.818 Y135.966 E9.39193 F7200.000 ; infill
 G1 X107.177 Y134.221 F12000.000 ; move to first infill point
 G1 X107.177 Y138.441 E9.61667 F7200.000 ; infill
 G1 X106.537 Y138.695 E9.65338 ; infill
 G1 X106.537 Y138.001 E9.69033 ; infill
 G1 X105.896 Y138.001 E9.72446 ; infill
 G1 X105.896 Y138.773 E9.76555 ; infill
 G1 X105.256 Y138.779 E9.79967 ; infill
 G1 X105.256 Y138.001 E9.84107 ; infill
 G1 X104.615 Y138.001 E9.87519 ; infill
 G1 X104.615 Y138.779 E9.91659 ; infill
 G1 X104.987 Y132.615 F12000.000 ; move to first infill point
 G1 X102.620 Y132.615 E10.06560 F1800.000 ; infill
 G1 F9600
 G1 X104.987 Y132.615 E9.50344 ; wipe and retract
 G1 E5.06560 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.600 F12000.000 ; lift Z
 G1 X104.430 Y102.815 F12000.000 ; move to first perimeter point
 G1 Z7.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X101.979 Y102.815 E5.07276 F7200.000 ; perimeter
 G1 X100.201 Y91.215 E5.42120 ; perimeter
 G1 X102.490 Y91.215 E5.48916 ; perimeter
 G1 X104.420 Y102.755 E5.83658 ; perimeter
 G1 X104.073 Y102.634 F12000.000 ; move inwards before travel
 G1 X104.008 Y102.458 F12000.000 ; move to first perimeter point
 G1 X102.286 Y102.458 E5.88771 F7200.000 ; perimeter
 G1 X100.617 Y91.572 E6.21470 ; perimeter
 G1 X102.188 Y91.572 E6.26133 ; perimeter
 G1 X103.998 Y102.398 E6.58725 ; perimeter
 G1 X103.586 Y102.100 F12000.000 ; move to first perimeter point
 G1 X102.593 Y102.100 E6.61677 F7200.000 ; perimeter
 G1 X101.033 Y91.929 E6.92230 ; perimeter
 G1 X101.885 Y91.929 E6.94761 ; perimeter
 G1 X103.577 Y102.041 E7.25203 ; perimeter
 G1 X103.165 Y101.743 F12000.000 ; move to first perimeter point
 G1 X102.899 Y101.743 E7.25992 F7200.000 ; perimeter
 G1 X102.350 Y98.160 E7.36755 ; perimeter
 G1 X102.560 Y98.127 E7.37387 ; perimeter
 G1 X103.155 Y101.684 E7.48096 ; perimeter
 G1 X102.427 Y97.967 F12000.000 ; move to first infill point
 G1 X101.487 Y92.107 E7.85455 F1800.000 ; infill
 G1 F9600
 G1 X102.427 Y97.967 E6.44509 ; wipe and retract
 G1 E2.85455 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.600 F12000.000 ; lift Z
 G1 X95.608 Y123.815 F12000.000 ; move to first perimeter point
 G1 Z7.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X95.608 Y132.215 E5.24941 F7200.000 ; perimeter
 G1 X101.175 Y132.215 E5.41470 ; perimeter
 G1 X101.175 Y133.015 E5.43845 ; perimeter
 G1 X98.808 Y133.015 E5.50873 ; perimeter
 G1 X98.808 Y136.015 E5.59780 ; perimeter
 G1 X101.175 Y136.015 E5.66808 ; perimeter
 G1 X101.175 Y140.785 E5.80973 ; perimeter
 G1 X93.363 Y140.785 E6.04170 ; perimeter
 G1 X91.653 Y140.137 E6.09599 ; perimeter
 G1 X90.449 Y138.778 E6.14991 ; perimeter
 G1 X90.008 Y136.991 E6.20455 ; perimeter
 G1 X90.507 Y59.215 E8.51388 ; perimeter
 G1 X96.608 Y59.215 E8.69503 ; perimeter
 G1 X96.608 Y69.215 E8.99194 ; perimeter
 G1 X98.811 Y69.215 E9.05735 ; perimeter
 G1 X101.085 Y82.815 E9.46676 ; perimeter
 G1 X98.914 Y82.815 E9.53124 ; perimeter
 G1 X97.105 Y71.015 E9.88569 ; perimeter
 G1 X92.884 Y71.015 E10.01101 ; perimeter
 G1 X92.608 Y118.036 E11.40717 ; perimeter
 G1 X92.875 Y119.220 E11.44319 ; perimeter
 G1 X93.635 Y120.155 E11.47897 ; perimeter
 G1 X94.703 Y120.597 E11.51329 ; perimeter
 G1 X101.631 Y120.597 E11.71899 ; perimeter
 G1 X102.742 Y120.450 E11.75225 ; perimeter
 G1 X103.689 Y119.737 E11.78746 ; perimeter
 G1 X104.219 Y118.635 E11.82377 ; perimeter
 G1 X104.219 Y117.425 E11.85969 ; perimeter
 G1 X103.267 Y111.215 E12.04623 ; perimeter
 G1 X105.835 Y111.215 E12.12247 ; perimeter
 G1 X107.942 Y123.815 E12.50177 ; perimeter
 G1 X95.668 Y123.815 E12.86619 ; perimeter
 G1 X95.208 Y123.815 F12000.000 ; move inwards before travel
 G1 X95.251 Y123.458 F12000.000 ; move to first perimeter point
 G1 X95.251 Y132.572 E13.13680 F7200.000 ; perimeter
 G1 X98.451 Y132.572 E13.23182 ; perimeter
 G1 X98.451 Y136.372 E13.34464 ; perimeter
 G1 X100.818 Y136.372 E13.41492 ; perimeter
 G1 X100.818 Y140.428 E13.53537 ; perimeter
 G1 X93.428 Y140.428 E13.75479 ; perimeter
 G1 X91.862 Y139.834 E13.80452 ; perimeter
 G1 X90.774 Y138.607 E13.85321 ; perimeter
 G1 X90.366 Y136.949 E13.90392 ; perimeter
 G1 X90.862 Y59.572 E16.20139 ; perimeter
 G1 X96.251 Y59.572 E16.36141 ; perimeter
 G1 X96.251 Y69.572 E16.65832 ; perimeter
 G1 X98.509 Y69.572 E16.72536 ; perimeter
 G1 X100.664 Y82.458 E17.11327 ; perimeter
 G1 X99.220 Y82.458 E17.15613 ; perimeter
 G1 X97.411 Y70.658 E17.51058 ; perimeter
 G1 X92.529 Y70.658 E17.65553 ; perimeter
 G1 X92.251 Y118.075 E19.06344 ; perimeter
 G1 X92.545 Y119.380 E19.10316 ; perimeter
 G1 X93.415 Y120.451 E19.14411 ; perimeter
 G1 X94.632 Y120.954 E19.18323 ; perimeter
 G1 X101.655 Y120.954 E19.39173 ; perimeter
 G1 X102.881 Y120.792 E19.42847 ; perimeter
 G1 X103.973 Y119.970 E19.46905 ; perimeter
 G1 X104.576 Y118.716 E19.51035 ; perimeter
 G1 X104.576 Y117.398 E19.54949 ; perimeter
 G1 X103.683 Y111.572 E19.72450 ; perimeter
 G1 X105.532 Y111.572 E19.77940 ; perimeter
 G1 X107.520 Y123.458 E20.13721 ; perimeter
 G1 X95.311 Y123.458 E20.49971 ; perimeter
 G1 X94.894 Y123.100 F12000.000 ; move to first perimeter point
 G1 X94.894 Y132.929 E20.79153 F7200.000 ; perimeter
 G1 X98.094 Y132.929 E20.88654 ; perimeter
 G1 X98.094 Y136.729 E20.99936 ; perimeter
 G1 X100.461 Y136.729 E21.06964 ; perimeter
 G1 X100.461 Y140.071 E21.16889 ; perimeter
 G1 X93.493 Y140.071 E21.37576 ; perimeter
 G1 X92.071 Y139.532 E21.42094 ; perimeter
 G1 X91.100 Y138.436 E21.46440 ; perimeter
 G1 X90.723 Y136.906 E21.51118 ; perimeter
 G1 X91.216 Y59.929 E23.79679 ; perimeter
 G1 X95.894 Y59.929 E23.93567 ; perimeter
 G1 X95.894 Y69.929 E24.23259 ; perimeter
 G1 X98.206 Y69.929 E24.30125 ; perimeter
 G1 X100.242 Y82.100 E24.66766 ; perimeter
 G1 X99.527 Y82.100 E24.68889 ; perimeter
 G1 X97.718 Y70.300 E25.04334 ; perimeter
 G1 X92.174 Y70.300 E25.20794 ; perimeter
 G1 X91.893 Y118.114 E26.62761 ; perimeter
 G1 X92.216 Y119.540 E26.67102 ; perimeter
 G1 X93.195 Y120.746 E26.71714 ; perimeter
 G1 X94.561 Y121.311 E26.76105 ; perimeter
 G1 X101.678 Y121.311 E26.97236 ; perimeter
 G1 X103.021 Y121.133 E27.01258 ; perimeter
 G1 X104.257 Y120.203 E27.05852 ; perimeter
 G1 X104.933 Y118.797 E27.10482 ; perimeter
 G1 X104.933 Y117.371 E27.14719 ; perimeter
 G1 X104.099 Y111.929 E27.31065 ; perimeter
 G1 X105.230 Y111.929 E27.34423 ; perimeter
 G1 X107.098 Y123.100 E27.68053 ; perimeter
 G1 X94.954 Y123.100 E28.04111 ; perimeter
 G1 X94.537 Y122.743 F12000.000 ; move to first perimeter point
 G1 X94.537 Y133.286 E28.35413 F7200.000 ; perimeter
 G1 X97.737 Y133.286 E28.44915 ; perimeter
 G1 X97.737 Y137.086 E28.56197 ; perimeter
 G1 X100.104 Y137.086 E28.63225 ; perimeter
 G1 X100.104 Y139.714 E28.71029 ; perimeter
 G1 X93.559 Y139.714 E28.90462 ; perimeter
 G1 X92.280 Y139.229 E28.94524 ; perimeter
 G1 X91.426 Y138.265 E28.98348 ; perimeter
 G1 X91.080 Y136.864 E29.02632 ; perimeter
 G1 X91.571 Y60.286 E31.30008 ; perimeter
 G1 X95.537 Y60.286 E31.41782 ; perimeter
 G1 X95.537 Y69.943 E31.70457 ; perimeter
 G1 X91.819 Y69.943 E31.81494 ; perimeter
 G1 X91.536 Y118.153 E33.24637 ; perimeter
 G1 X91.886 Y119.700 E33.29347 ; perimeter
 G1 X92.975 Y121.041 E33.34477 ; perimeter
 G1 X94.490 Y121.668 E33.39347 ; perimeter
 G1 X101.702 Y121.668 E33.60758 ; perimeter
 G1 X103.161 Y121.475 E33.65129 ; perimeter
 G1 X104.541 Y120.436 E33.70259 ; perimeter
 G1 X105.290 Y118.879 E33.75389 ; perimeter
 G1 X105.290 Y117.343 E33.79948 ; perimeter
 G1 X104.515 Y112.286 E33.95140 ; perimeter
 G1 X104.928 Y112.286 E33.96365 ; perimeter
 G1 X106.677 Y122.743 E34.27846 ; perimeter
 G1 X94.597 Y122.743 E34.63712 ; perimeter
 G1 F9600
 G1 X94.537 Y133.286 E32.13324 ; wipe and retract
 G1 F9600
 G1 X97.737 Y133.286 E31.37324 ; wipe and retract
 G1 F9600
 G1 X97.737 Y137.086 E30.47074 ; wipe and retract
 G1 F9600
 G1 X100.104 Y137.086 E29.90858 ; wipe and retract
 G1 F9600
 G1 X100.104 Y137.176 E29.88712 ; wipe and retract
 G1 E29.63712 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.600 F12000.000 ; lift Z
 G1 X95.180 Y69.586 F12000.000 ; move to first perimeter point
 G1 Z7.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.869 Y69.586 E5.09831 F7200.000 ; perimeter
 G1 X91.926 Y60.643 E5.36386 ; perimeter
 G1 X95.180 Y60.643 E5.46047 ; perimeter
 G1 X95.180 Y69.526 E5.72422 ; perimeter
 G1 X94.823 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.228 Y69.229 E5.80126 F7200.000 ; perimeter
 G1 X92.281 Y61.000 E6.04560 ; perimeter
 G1 X94.823 Y61.000 E6.12108 ; perimeter
 G1 X94.823 Y69.169 E6.36363 ; perimeter
 G1 F9600
 G1 X92.228 Y69.229 E5.74724 ; wipe and retract
 G1 F9600
 G1 X92.281 Y61.000 E3.79276 ; wipe and retract
 G1 F9600
 G1 X94.823 Y61.000 E3.18906 ; wipe and retract
 G1 F9600
 G1 X94.823 Y67.633 E1.61363 ; wipe and retract
 G1 E1.36363 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.600 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z7.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X99.747 Y137.443 E5.61234 ; perimeter
 G1 X99.747 Y139.357 E5.66918 ; perimeter
 G1 X93.624 Y139.357 E5.85096 ; perimeter
 G1 X92.488 Y138.926 E5.88703 ; perimeter
 G1 X91.751 Y138.094 E5.92004 ; perimeter
 G1 X91.438 Y136.822 E5.95894 ; perimeter
 G1 X91.546 Y119.849 E6.46290 ; perimeter
 G1 X92.754 Y121.337 E6.51980 ; perimeter
 G1 X94.419 Y122.025 E6.57330 ; perimeter
 G1 X101.725 Y122.025 E6.79022 ; perimeter
 G1 X103.301 Y121.817 E6.83741 ; perimeter
 G1 X104.825 Y120.669 E6.89407 ; perimeter
 G1 X105.561 Y119.141 E6.94441 ; perimeter
 G1 X105.716 Y119.163 E6.94906 ; perimeter
 G1 X106.255 Y122.386 E7.04609 ; perimeter
 G1 X94.240 Y122.386 E7.40283 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E7.40741 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E7.45583 ; perimeter
 G1 X105.394 Y120.311 E7.47531 ; perimeter
 G1 X105.549 Y120.333 E7.47997 ; perimeter
 G1 X105.833 Y122.029 E7.53104 ; perimeter
 G1 X103.916 Y122.029 E7.58797 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E7.54465 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.15729 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E7.00147 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E6.96423 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E6.55573 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.10033 ; wipe and retract
 G1 E2.58797 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.600 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z7.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X99.390 Y137.800 E5.27812 ; perimeter
 G1 X99.390 Y139.000 E5.31375 ; perimeter
 G1 X93.690 Y139.000 E5.48299 ; perimeter
 G1 X92.697 Y138.624 E5.51450 ; perimeter
 G1 X92.077 Y137.923 E5.54228 ; perimeter
 G1 X91.795 Y136.780 E5.57725 ; perimeter
 G1 X91.897 Y120.847 E6.05031 ; perimeter
 G1 X92.534 Y121.632 E6.08033 ; perimeter
 G1 X93.823 Y122.165 E6.12172 ; perimeter
 G1 X93.823 Y133.940 E6.47134 ; perimeter
 G1 X93.888 Y134.201 F12000.000 ; move to first infill point
 G1 X93.888 Y138.779 E6.68756 F7200.000 ; infill
 G1 X94.456 Y138.779 E6.71440 ; infill
 G1 X94.456 Y134.201 E6.93062 ; infill
 G1 X95.024 Y134.201 E6.95746 ; infill
 G1 X95.024 Y138.779 E7.17368 ; infill
 G1 X95.593 Y138.779 E7.20052 ; infill
 G1 X95.593 Y134.201 E7.41674 ; infill
 G1 X96.161 Y134.201 E7.44358 ; infill
 G1 X96.161 Y138.779 E7.65980 ; infill
 G1 X96.729 Y138.001 E7.70528 ; infill
 G1 X96.729 Y138.779 E7.74200 ; infill
 G1 X97.297 Y138.779 E7.76883 ; infill
 G1 X97.297 Y138.001 E7.80555 ; infill
 G1 X97.865 Y138.001 E7.83239 ; infill
 G1 X97.865 Y138.779 E7.86910 ; infill
 G1 X98.433 Y138.779 E7.89594 ; infill
 G1 X98.433 Y138.001 E7.93265 ; infill
 G1 X99.001 Y138.001 E7.95949 ; infill
 G1 X99.001 Y138.779 E7.99621 ; infill
 G1 X93.320 Y138.633 F12000.000 ; move to first infill point
 G1 X93.320 Y122.189 E8.77300 F7200.000 ; infill
 G1 X92.752 Y121.954 E8.80205 ; infill
 G1 X92.752 Y138.297 E9.57407 ; infill
 G1 X92.184 Y136.985 F12000.000 ; move to first infill point
 G1 X92.184 Y133.448 E9.74113 F7200.000 ; infill
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X100.997 Y132.615 E9.89013 F1800.000 ; infill
 G1 F9600
 G1 X98.630 Y132.615 E9.32797 ; wipe and retract
 G1 E4.89013 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.600 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z7.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X104.774 Y121.808 F12000.000 ; move to first infill point
 G1 X104.774 Y121.449 E5.07163 F7200.000 ; infill
 G1 X105.374 Y121.352 E5.10194 ; infill
 G1 X105.374 Y121.808 E5.12466 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.931 E5.19069 F1800.000 ; infill
 G1 X105.579 Y117.931 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.20886 F1800.000 ; infill
 G1 X104.750 Y112.464 E5.35489 ; infill
 G1 F9600
 G1 X105.528 Y117.321 E4.18681 ; wipe and retract
 G1 F9600
 G1 X105.579 Y117.931 E4.04146 ; wipe and retract
 G1 E0.35489 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.600 F12000.000 ; lift Z
 G1 X91.388 Y118.357 F12000.000 ; move to first infill point
 G1 Z7.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.491 Y119.308 E5.02840 F1800.000 ; infill
 G1 X91.703 Y119.744 E5.04280 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E4.92765 ; wipe and retract
 G1 F9600
 G1 X91.388 Y118.357 E4.70044 ; wipe and retract
 G1 E0.04280 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.600 F12000.000 ; lift Z
 G1 X99.855 Y81.922 F12000.000 ; move to first infill point
 G1 Z7.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.594 Y74.053 E5.50169 F1800.000 ; infill
 G1 X97.962 Y70.107 E5.62034 F1800.000 ; infill
 G1 X94.434 Y69.008 F12000.000 ; move to first infill point
 G1 X94.434 Y61.221 E6.01207 F7200.000 ; infill
 G1 X93.829 Y61.221 E6.04251 ; infill
 G1 X93.829 Y69.008 E6.43424 ; infill
 G1 X93.224 Y69.008 E6.46468 ; infill
 G1 X93.224 Y61.221 E6.85642 ; infill
 G1 X92.619 Y65.554 F12000.000 ; move to first infill point
 G1 X92.619 Y69.008 E7.03018 F7200.000 ; infill
 G1 F9600
 G1 X92.619 Y65.554 E6.20988 ; wipe and retract
 G1 E2.03018 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.600 F12000.000 ; lift Z
 G1 Z7.600 F12000.000 ; move to next layer (64)
 G1 Z8.600 F12000.000 ; lift Z
 G1 X100.785 Y83.604 F12000.000 ; move to first support material interface point
 G1 Z7.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X100.836 Y83.515 E5.00691 F1680.000 ; support material interface
 G1 X99.961 Y83.515 E5.06543 ; support material interface
 G1 X99.511 Y84.294 E5.12555 ; support material interface
 G1 X98.674 Y84.294 E5.18142 ; support material interface
 G1 X98.768 Y84.904 E5.22265 ; support material interface
 G1 X99.337 Y84.904 E5.26069 ; support material interface
 G1 X99.787 Y85.683 E5.32082 ; support material interface
 G1 X99.337 Y86.463 E5.38094 ; support material interface
 G1 X99.007 Y86.463 E5.40302 ; support material interface
 G1 X99.177 Y87.573 E5.47804 ; support material interface
 G1 X99.746 Y87.573 E5.51609 ; support material interface
 G1 X100.196 Y88.352 E5.57621 ; support material interface
 G1 X99.746 Y89.132 E5.63634 ; support material interface
 G1 X99.416 Y89.132 E5.65842 ; support material interface
 G1 X99.546 Y89.984 E5.71603 ; support material interface
 G1 X99.690 Y89.735 E5.73524 ; support material interface
 G1 X100.590 Y89.735 E5.79536 ; support material interface
 G1 X101.040 Y90.515 E5.85549 ; support material interface
 G1 X101.940 Y90.515 E5.91561 ; support material interface
 G1 X102.390 Y89.735 E5.97574 ; support material interface
 G1 X102.710 Y89.735 E5.99709 ; support material interface
 G1 X102.706 Y89.710 E5.99882 ; support material interface
 G1 X102.125 Y89.710 E6.03759 ; support material interface
 G1 X101.675 Y88.930 E6.09772 ; support material interface
 G1 X102.125 Y88.151 E6.15784 ; support material interface
 G1 X102.445 Y88.151 E6.17920 ; support material interface
 G1 X102.260 Y87.047 E6.25399 ; support material interface
 G1 X101.680 Y87.047 E6.29276 ; support material interface
 G1 X101.230 Y86.267 E6.35288 ; support material interface
 G1 X101.680 Y85.488 E6.41301 ; support material interface
 G1 X102.000 Y85.488 E6.43436 ; support material interface
 G1 X101.815 Y84.384 E6.50915 ; support material interface
 G1 X101.235 Y84.384 E6.54792 ; support material interface
 G1 X100.785 Y83.604 E6.60804 ; support material interface
 G1 X100.857 Y85.229 F12000.000 ; move to first support material interface point
 G1 X100.495 Y85.261 E6.63232 F1680.000 ; support material interface
 G1 X100.558 Y86.792 F12000.000 ; move to first support material interface point
 G1 X100.203 Y86.823 E6.65613 F1680.000 ; support material interface
 G1 X100.921 Y87.958 F12000.000 ; move to first support material interface point
 G1 X101.287 Y87.926 E6.68070 F1680.000 ; support material interface
 M106 S239.7 ; enable fan
 G1 F9600
 G1 X100.921 Y87.958 E6.59333 ; wipe and retract
 G1 E1.68070 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.600 F12000.000 ; lift Z
 G1 X104.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z7.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X102.095 Y133.015 E5.08056 F7200.000 ; perimeter
 G1 X102.095 Y132.215 E5.10432 ; perimeter
 G1 X109.346 Y132.215 E5.31963 ; perimeter
 G1 X109.992 Y136.074 E5.43581 ; perimeter
 G1 X109.992 Y137.923 E5.49070 ; perimeter
 G1 X109.148 Y139.531 E5.54462 ; perimeter
 G1 X107.653 Y140.562 E5.59854 ; perimeter
 G1 X105.814 Y140.785 E5.65356 ; perimeter
 G1 X102.095 Y140.785 E5.76398 ; perimeter
 G1 X102.095 Y136.015 E5.90563 ; perimeter
 G1 X104.808 Y136.015 E5.98620 ; perimeter
 G1 X104.808 Y133.075 E6.07349 ; perimeter
 G1 X104.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X105.165 Y136.372 F12000.000 ; move to first perimeter point
 G1 X105.165 Y132.572 E6.18632 F7200.000 ; perimeter
 G1 X109.044 Y132.572 E6.30149 ; perimeter
 G1 X109.635 Y136.104 E6.40781 ; perimeter
 G1 X109.635 Y137.835 E6.45921 ; perimeter
 G1 X108.873 Y139.287 E6.50790 ; perimeter
 G1 X107.523 Y140.218 E6.55659 ; perimeter
 G1 X105.792 Y140.428 E6.60836 ; perimeter
 G1 X102.452 Y140.428 E6.70754 ; perimeter
 G1 X102.452 Y136.372 E6.82799 ; perimeter
 G1 X105.105 Y136.372 E6.90677 ; perimeter
 G1 X105.522 Y136.729 F12000.000 ; move to first perimeter point
 G1 X105.522 Y132.929 E7.01960 F7200.000 ; perimeter
 G1 X108.742 Y132.929 E7.11519 ; perimeter
 G1 X109.278 Y136.133 E7.21166 ; perimeter
 G1 X109.278 Y137.747 E7.25956 ; perimeter
 G1 X108.597 Y139.043 E7.30302 ; perimeter
 G1 X107.393 Y139.874 E7.34649 ; perimeter
 G1 X105.771 Y140.071 E7.39500 ; perimeter
 G1 X102.809 Y140.071 E7.48294 ; perimeter
 G1 X102.809 Y136.729 E7.58218 ; perimeter
 G1 X105.462 Y136.729 E7.66097 ; perimeter
 G1 X105.879 Y137.086 F12000.000 ; move to first perimeter point
 G1 X105.879 Y133.286 E7.77379 F7200.000 ; perimeter
 G1 X108.440 Y133.286 E7.84981 ; perimeter
 G1 X108.921 Y136.163 E7.93642 ; perimeter
 G1 X108.921 Y137.659 E7.98083 ; perimeter
 G1 X108.322 Y138.799 E8.01906 ; perimeter
 G1 X107.262 Y139.530 E8.05730 ; perimeter
 G1 X105.749 Y139.714 E8.10256 ; perimeter
 G1 X103.166 Y139.714 E8.17926 ; perimeter
 G1 X103.166 Y137.086 E8.25729 ; perimeter
 G1 X105.819 Y137.086 E8.33608 ; perimeter
 G1 X106.236 Y137.443 F12000.000 ; move to first perimeter point
 G1 X106.236 Y133.643 E8.44890 F7200.000 ; perimeter
 G1 X108.137 Y133.643 E8.50534 ; perimeter
 G1 X108.564 Y136.193 E8.58209 ; perimeter
 G1 X108.564 Y137.571 E8.62301 ; perimeter
 G1 X108.047 Y138.555 E8.65602 ; perimeter
 G1 X107.132 Y139.187 E8.68903 ; perimeter
 G1 X105.728 Y139.357 E8.73103 ; perimeter
 G1 X103.523 Y139.357 E8.79649 ; perimeter
 G1 X103.523 Y137.443 E8.85332 ; perimeter
 G1 X106.176 Y137.443 E8.93211 ; perimeter
 G1 X106.593 Y137.800 F12000.000 ; move to first perimeter point
 G1 X106.593 Y134.000 E9.04493 F7200.000 ; perimeter
 G1 X107.835 Y134.000 E9.08179 ; perimeter
 G1 X108.207 Y136.222 E9.14869 ; perimeter
 G1 X108.207 Y137.482 E9.18611 ; perimeter
 G1 X107.772 Y138.311 E9.21389 ; perimeter
 G1 X107.001 Y138.843 E9.24168 ; perimeter
 G1 X105.706 Y139.000 E9.28043 ; perimeter
 G1 X103.880 Y139.000 E9.33464 ; perimeter
 G1 X103.880 Y137.800 E9.37027 ; perimeter
 G1 X106.533 Y137.800 E9.44905 ; perimeter
 G1 X104.101 Y138.611 F12000.000 ; move to first infill point
 G1 X106.015 Y138.611 E9.54506 F7200.000 ; infill
 G1 X106.795 Y138.008 E9.59450 ; infill
 G1 X107.681 Y138.008 E9.63898 ; infill
 G1 X107.985 Y137.405 E9.67286 ; infill
 G1 X106.795 Y137.405 E9.73257 ; infill
 G1 X106.795 Y136.802 E9.76283 ; infill
 G1 X107.985 Y136.802 E9.82254 ; infill
 G1 X107.985 Y136.198 E9.85280 ; infill
 G1 X106.795 Y136.198 E9.91251 ; infill
 G1 X106.795 Y135.595 E9.94277 ; infill
 G1 X107.895 Y135.595 E9.99796 ; infill
 G1 X107.794 Y134.992 E10.02864 ; infill
 G1 X106.795 Y134.992 E10.07877 ; infill
 G1 X106.795 Y134.388 E10.10904 ; infill
 G1 X107.693 Y134.388 E10.15411 ; infill
 G1 X104.987 Y132.615 F12000.000 ; move to first infill point
 G1 X102.273 Y132.615 E10.32492 F1800.000 ; infill
 G1 F9600
 G1 X104.987 Y132.615 E9.68049 ; wipe and retract
 G1 E5.32492 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.800 F12000.000 ; lift Z
 G1 X104.430 Y102.815 F12000.000 ; move to first perimeter point
 G1 Z7.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X101.979 Y102.815 E5.07276 F7200.000 ; perimeter
 G1 X100.201 Y91.215 E5.42120 ; perimeter
 G1 X102.490 Y91.215 E5.48916 ; perimeter
 G1 X104.420 Y102.755 E5.83658 ; perimeter
 G1 X104.073 Y102.634 F12000.000 ; move inwards before travel
 G1 X104.008 Y102.458 F12000.000 ; move to first perimeter point
 G1 X102.286 Y102.458 E5.88771 F7200.000 ; perimeter
 G1 X100.617 Y91.572 E6.21470 ; perimeter
 G1 X102.188 Y91.572 E6.26133 ; perimeter
 G1 X103.998 Y102.398 E6.58725 ; perimeter
 G1 X103.586 Y102.100 F12000.000 ; move to first perimeter point
 G1 X102.593 Y102.100 E6.61677 F7200.000 ; perimeter
 G1 X101.033 Y91.929 E6.92230 ; perimeter
 G1 X101.885 Y91.929 E6.94761 ; perimeter
 G1 X103.577 Y102.041 E7.25203 ; perimeter
 G1 X103.165 Y101.743 F12000.000 ; move to first perimeter point
 G1 X102.899 Y101.743 E7.25992 F7200.000 ; perimeter
 G1 X102.350 Y98.160 E7.36755 ; perimeter
 G1 X102.560 Y98.127 E7.37387 ; perimeter
 G1 X103.155 Y101.684 E7.48097 ; perimeter
 G1 X102.427 Y97.967 F12000.000 ; move to first infill point
 G1 X101.487 Y92.107 E7.85455 F1800.000 ; infill
 G1 F9600
 G1 X102.427 Y97.967 E6.44510 ; wipe and retract
 G1 E2.85455 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.800 F12000.000 ; lift Z
 G1 X95.608 Y123.815 F12000.000 ; move to first perimeter point
 G1 Z7.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X95.608 Y132.215 E5.24941 F7200.000 ; perimeter
 G1 X101.522 Y132.215 E5.42498 ; perimeter
 G1 X101.522 Y133.015 E5.44874 ; perimeter
 G1 X98.808 Y133.015 E5.52930 ; perimeter
 G1 X98.808 Y136.015 E5.61837 ; perimeter
 G1 X101.522 Y136.015 E5.69894 ; perimeter
 G1 X101.522 Y140.785 E5.84059 ; perimeter
 G1 X93.363 Y140.785 E6.08284 ; perimeter
 G1 X91.653 Y140.137 E6.13713 ; perimeter
 G1 X90.449 Y138.778 E6.19105 ; perimeter
 G1 X90.008 Y136.991 E6.24569 ; perimeter
 G1 X90.507 Y59.215 E8.55502 ; perimeter
 G1 X96.608 Y59.215 E8.73617 ; perimeter
 G1 X96.608 Y69.215 E9.03308 ; perimeter
 G1 X98.811 Y69.215 E9.09849 ; perimeter
 G1 X101.085 Y82.815 E9.50790 ; perimeter
 G1 X98.914 Y82.815 E9.57238 ; perimeter
 G1 X97.105 Y71.015 E9.92683 ; perimeter
 G1 X92.884 Y71.015 E10.05215 ; perimeter
 G1 X92.608 Y118.036 E11.44831 ; perimeter
 G1 X92.875 Y119.220 E11.48433 ; perimeter
 G1 X93.635 Y120.155 E11.52011 ; perimeter
 G1 X94.703 Y120.597 E11.55443 ; perimeter
 G1 X101.631 Y120.597 E11.76013 ; perimeter
 G1 X102.742 Y120.450 E11.79339 ; perimeter
 G1 X103.689 Y119.737 E11.82860 ; perimeter
 G1 X104.219 Y118.635 E11.86491 ; perimeter
 G1 X104.219 Y117.425 E11.90083 ; perimeter
 G1 X103.267 Y111.215 E12.08737 ; perimeter
 G1 X105.835 Y111.215 E12.16361 ; perimeter
 G1 X107.942 Y123.815 E12.54291 ; perimeter
 G1 X95.668 Y123.815 E12.90733 ; perimeter
 G1 X95.208 Y123.815 F12000.000 ; move inwards before travel
 G1 X95.251 Y123.458 F12000.000 ; move to first perimeter point
 G1 X95.251 Y132.572 E13.17794 F7200.000 ; perimeter
 G1 X98.451 Y132.572 E13.27296 ; perimeter
 G1 X98.451 Y136.372 E13.38578 ; perimeter
 G1 X101.164 Y136.372 E13.46635 ; perimeter
 G1 X101.164 Y140.428 E13.58679 ; perimeter
 G1 X93.428 Y140.428 E13.81650 ; perimeter
 G1 X91.862 Y139.834 E13.86623 ; perimeter
 G1 X90.774 Y138.607 E13.91492 ; perimeter
 G1 X90.366 Y136.949 E13.96563 ; perimeter
 G1 X90.862 Y59.572 E16.26310 ; perimeter
 G1 X96.251 Y59.572 E16.42312 ; perimeter
 G1 X96.251 Y69.572 E16.72003 ; perimeter
 G1 X98.509 Y69.572 E16.78707 ; perimeter
 G1 X100.664 Y82.458 E17.17498 ; perimeter
 G1 X99.220 Y82.458 E17.21784 ; perimeter
 G1 X97.411 Y70.658 E17.57229 ; perimeter
 G1 X92.529 Y70.658 E17.71724 ; perimeter
 G1 X92.251 Y118.075 E19.12515 ; perimeter
 G1 X92.545 Y119.380 E19.16487 ; perimeter
 G1 X93.415 Y120.451 E19.20582 ; perimeter
 G1 X94.632 Y120.954 E19.24494 ; perimeter
 G1 X101.655 Y120.954 E19.45344 ; perimeter
 G1 X102.881 Y120.792 E19.49018 ; perimeter
 G1 X103.973 Y119.970 E19.53076 ; perimeter
 G1 X104.576 Y118.716 E19.57206 ; perimeter
 G1 X104.576 Y117.398 E19.61120 ; perimeter
 G1 X103.683 Y111.572 E19.78621 ; perimeter
 G1 X105.532 Y111.572 E19.84111 ; perimeter
 G1 X107.520 Y123.458 E20.19892 ; perimeter
 G1 X95.311 Y123.458 E20.56142 ; perimeter
 G1 X94.894 Y123.100 F12000.000 ; move to first perimeter point
 G1 X94.894 Y132.929 E20.85324 F7200.000 ; perimeter
 G1 X98.094 Y132.929 E20.94825 ; perimeter
 G1 X98.094 Y136.729 E21.06108 ; perimeter
 G1 X100.807 Y136.729 E21.14164 ; perimeter
 G1 X100.807 Y140.071 E21.24088 ; perimeter
 G1 X93.493 Y140.071 E21.45804 ; perimeter
 G1 X92.071 Y139.532 E21.50322 ; perimeter
 G1 X91.100 Y138.436 E21.54668 ; perimeter
 G1 X90.723 Y136.906 E21.59346 ; perimeter
 G1 X91.216 Y59.929 E23.87907 ; perimeter
 G1 X95.894 Y59.929 E24.01795 ; perimeter
 G1 X95.894 Y69.929 E24.31487 ; perimeter
 G1 X98.206 Y69.929 E24.38353 ; perimeter
 G1 X100.242 Y82.100 E24.74994 ; perimeter
 G1 X99.527 Y82.100 E24.77117 ; perimeter
 G1 X97.718 Y70.300 E25.12562 ; perimeter
 G1 X92.174 Y70.300 E25.29022 ; perimeter
 G1 X91.893 Y118.114 E26.70989 ; perimeter
 G1 X92.216 Y119.540 E26.75330 ; perimeter
 G1 X93.195 Y120.746 E26.79942 ; perimeter
 G1 X94.561 Y121.311 E26.84333 ; perimeter
 G1 X101.678 Y121.311 E27.05464 ; perimeter
 G1 X103.021 Y121.133 E27.09486 ; perimeter
 G1 X104.257 Y120.203 E27.14080 ; perimeter
 G1 X104.933 Y118.797 E27.18710 ; perimeter
 G1 X104.933 Y117.371 E27.22947 ; perimeter
 G1 X104.099 Y111.929 E27.39293 ; perimeter
 G1 X105.230 Y111.929 E27.42651 ; perimeter
 G1 X107.098 Y123.100 E27.76281 ; perimeter
 G1 X94.954 Y123.100 E28.12339 ; perimeter
 G1 X94.537 Y122.743 F12000.000 ; move to first perimeter point
 G1 X94.537 Y133.286 E28.43641 F7200.000 ; perimeter
 G1 X97.737 Y133.286 E28.53143 ; perimeter
 G1 X97.737 Y137.086 E28.64425 ; perimeter
 G1 X100.450 Y137.086 E28.72482 ; perimeter
 G1 X100.450 Y139.714 E28.80286 ; perimeter
 G1 X93.559 Y139.714 E29.00747 ; perimeter
 G1 X92.280 Y139.229 E29.04809 ; perimeter
 G1 X91.426 Y138.265 E29.08633 ; perimeter
 G1 X91.080 Y136.864 E29.12917 ; perimeter
 G1 X91.571 Y60.286 E31.40293 ; perimeter
 G1 X95.537 Y60.286 E31.52067 ; perimeter
 G1 X95.537 Y69.943 E31.80742 ; perimeter
 G1 X91.819 Y69.943 E31.91779 ; perimeter
 G1 X91.536 Y118.153 E33.34922 ; perimeter
 G1 X91.886 Y119.700 E33.39633 ; perimeter
 G1 X92.975 Y121.041 E33.44762 ; perimeter
 G1 X94.490 Y121.668 E33.49632 ; perimeter
 G1 X101.702 Y121.668 E33.71043 ; perimeter
 G1 X103.161 Y121.475 E33.75414 ; perimeter
 G1 X104.541 Y120.436 E33.80544 ; perimeter
 G1 X105.290 Y118.879 E33.85674 ; perimeter
 G1 X105.290 Y117.343 E33.90233 ; perimeter
 G1 X104.515 Y112.286 E34.05425 ; perimeter
 G1 X104.928 Y112.286 E34.06650 ; perimeter
 G1 X106.677 Y122.743 E34.38131 ; perimeter
 G1 X94.597 Y122.743 E34.73997 ; perimeter
 G1 F9600
 G1 X94.537 Y133.286 E32.23609 ; wipe and retract
 G1 F9600
 G1 X97.737 Y133.286 E31.47609 ; wipe and retract
 G1 F9600
 G1 X97.737 Y137.086 E30.57359 ; wipe and retract
 G1 F9600
 G1 X100.194 Y137.086 E29.98997 ; wipe and retract
 G1 E29.73997 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.800 F12000.000 ; lift Z
 G1 X95.180 Y69.586 F12000.000 ; move to first perimeter point
 G1 Z7.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.869 Y69.586 E5.09831 F7200.000 ; perimeter
 G1 X91.926 Y60.643 E5.36386 ; perimeter
 G1 X95.180 Y60.643 E5.46047 ; perimeter
 G1 X95.180 Y69.526 E5.72422 ; perimeter
 G1 X94.823 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.228 Y69.229 E5.80126 F7200.000 ; perimeter
 G1 X92.281 Y61.000 E6.04560 ; perimeter
 G1 X94.823 Y61.000 E6.12108 ; perimeter
 G1 X94.823 Y69.169 E6.36363 ; perimeter
 G1 F9600
 G1 X92.228 Y69.229 E5.74724 ; wipe and retract
 G1 F9600
 G1 X92.281 Y61.000 E3.79276 ; wipe and retract
 G1 F9600
 G1 X94.823 Y61.000 E3.18906 ; wipe and retract
 G1 F9600
 G1 X94.823 Y67.633 E1.61363 ; wipe and retract
 G1 E1.36363 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.800 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z7.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X100.093 Y137.443 E5.62263 ; perimeter
 G1 X100.093 Y139.357 E5.67946 ; perimeter
 G1 X93.624 Y139.357 E5.87153 ; perimeter
 G1 X92.488 Y138.926 E5.90760 ; perimeter
 G1 X91.751 Y138.094 E5.94061 ; perimeter
 G1 X91.438 Y136.822 E5.97951 ; perimeter
 G1 X91.546 Y119.849 E6.48347 ; perimeter
 G1 X92.754 Y121.337 E6.54037 ; perimeter
 G1 X94.419 Y122.025 E6.59387 ; perimeter
 G1 X101.725 Y122.025 E6.81079 ; perimeter
 G1 X103.301 Y121.817 E6.85798 ; perimeter
 G1 X104.825 Y120.669 E6.91464 ; perimeter
 G1 X105.561 Y119.141 E6.96498 ; perimeter
 G1 X105.716 Y119.163 E6.96963 ; perimeter
 G1 X106.255 Y122.386 E7.06666 ; perimeter
 G1 X94.240 Y122.386 E7.42340 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E7.42798 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E7.47640 ; perimeter
 G1 X105.394 Y120.311 E7.49588 ; perimeter
 G1 X105.549 Y120.333 E7.50054 ; perimeter
 G1 X105.833 Y122.029 E7.55161 ; perimeter
 G1 X103.916 Y122.029 E7.60854 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E7.56522 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.17786 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E7.02204 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E6.98480 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E6.57630 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.12090 ; wipe and retract
 G1 E2.60854 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.800 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z7.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X99.736 Y137.800 E5.28840 ; perimeter
 G1 X99.736 Y139.000 E5.32403 ; perimeter
 G1 X93.690 Y139.000 E5.50356 ; perimeter
 G1 X92.697 Y138.624 E5.53507 ; perimeter
 G1 X92.077 Y137.923 E5.56285 ; perimeter
 G1 X91.795 Y136.780 E5.59782 ; perimeter
 G1 X91.897 Y120.847 E6.07088 ; perimeter
 G1 X92.534 Y121.632 E6.10090 ; perimeter
 G1 X93.823 Y122.165 E6.14229 ; perimeter
 G1 X93.823 Y133.940 E6.49191 ; perimeter
 G1 X93.621 Y134.011 F12000.000 ; move to first infill point
 G1 X92.017 Y134.011 E6.56864 F7200.000 ; infill
 G1 X92.018 Y133.436 E6.59614 ; infill
 G1 X93.621 Y133.436 E6.67282 ; infill
 G1 X93.621 Y132.860 E6.70032 ; infill
 G1 X92.022 Y132.860 E6.77682 ; infill
 G1 X92.025 Y132.285 E6.80432 ; infill
 G1 X93.621 Y132.285 E6.88065 ; infill
 G1 X93.621 Y131.710 E6.90815 ; infill
 G1 X92.029 Y131.710 E6.98430 ; infill
 G1 X92.033 Y131.135 E7.01180 ; infill
 G1 X93.621 Y131.135 E7.08777 ; infill
 G1 X93.621 Y130.560 E7.11527 ; infill
 G1 X92.036 Y130.560 E7.19107 ; infill
 G1 X92.040 Y129.985 E7.21857 ; infill
 G1 X93.621 Y129.985 E7.29419 ; infill
 G1 X93.621 Y129.410 E7.32169 ; infill
 G1 X92.044 Y129.410 E7.39713 ; infill
 G1 X92.047 Y128.835 E7.42463 ; infill
 G1 X93.621 Y128.835 E7.49990 ; infill
 G1 X93.621 Y128.260 E7.52740 ; infill
 G1 X92.051 Y128.260 E7.60249 ; infill
 G1 X92.055 Y127.685 E7.63000 ; infill
 G1 X93.621 Y127.685 E7.70491 ; infill
 G1 X93.621 Y127.109 E7.73241 ; infill
 G1 X92.058 Y127.109 E7.80715 ; infill
 G1 X92.062 Y126.534 E7.83465 ; infill
 G1 X93.621 Y126.534 E7.90921 ; infill
 G1 X93.621 Y125.959 E7.93671 ; infill
 G1 X92.066 Y125.959 E8.01110 ; infill
 G1 X92.069 Y125.384 E8.03860 ; infill
 G1 X93.621 Y125.384 E8.11281 ; infill
 G1 X93.621 Y124.809 E8.14031 ; infill
 G1 X92.073 Y124.809 E8.21434 ; infill
 G1 X92.077 Y124.234 E8.24185 ; infill
 G1 X93.621 Y124.234 E8.31570 ; infill
 G1 X93.621 Y123.659 E8.34320 ; infill
 G1 X92.081 Y123.659 E8.41688 ; infill
 G1 X92.084 Y123.084 E8.44439 ; infill
 G1 X93.621 Y123.084 E8.51789 ; infill
 G1 X93.621 Y122.509 E8.54539 ; infill
 G1 X92.088 Y122.509 E8.61872 ; infill
 G1 X92.092 Y121.934 E8.64622 ; infill
 G1 X92.472 Y121.934 E8.66439 ; infill
 G1 X92.017 Y134.586 F12000.000 ; move to first infill point
 G1 X96.821 Y134.586 E8.89415 F7200.000 ; infill
 G1 X96.821 Y135.161 E8.92165 ; infill
 G1 X92.017 Y135.161 E9.15141 ; infill
 G1 X92.017 Y135.736 E9.17891 ; infill
 G1 X96.821 Y135.736 E9.40866 ; infill
 G1 X96.821 Y136.311 E9.43616 ; infill
 G1 X92.017 Y136.311 E9.66592 ; infill
 G1 X92.034 Y136.886 E9.69343 ; infill
 G1 X96.821 Y136.886 E9.92238 ; infill
 G1 X96.821 Y137.461 E9.94988 ; infill
 G1 X92.175 Y137.461 E10.17205 ; infill
 G1 X92.502 Y138.036 E10.20368 ; infill
 G1 X96.821 Y138.036 E10.41021 ; infill
 G1 X99.515 Y138.612 F12000.000 ; move to first infill point
 G1 X93.538 Y138.612 E10.69604 F7200.000 ; infill
 G1 X91.703 Y119.744 F12000.000 ; move to first infill point
 G1 X91.491 Y119.308 E10.71044 F1800.000 ; infill
 G1 X91.388 Y118.357 E10.73884 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E10.51163 ; wipe and retract
 G1 F9600
 G1 X91.703 Y119.744 E10.39649 ; wipe and retract
 G1 E5.73884 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.800 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z7.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X105.107 Y121.240 F12000.000 ; move to first infill point
 G1 X105.494 Y121.240 E5.07167 F7200.000 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.931 E5.13770 F1800.000 ; infill
 G1 X105.579 Y117.931 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.15587 F1800.000 ; infill
 G1 X104.750 Y112.464 E5.30190 ; infill
 G1 F9600
 G1 X105.528 Y117.321 E4.13382 ; wipe and retract
 G1 F9600
 G1 X105.579 Y117.931 E3.98847 ; wipe and retract
 G1 E0.30190 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.800 F12000.000 ; lift Z
 G1 X101.343 Y132.615 F12000.000 ; move to first infill point
 G1 Z7.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.630 Y132.615 E5.17081 F1800.000 ; infill
 G1 F9600
 G1 X101.343 Y132.615 E4.52638 ; wipe and retract
 G1 E0.17081 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.800 F12000.000 ; lift Z
 G1 X99.855 Y81.922 F12000.000 ; move to first infill point
 G1 Z7.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.594 Y74.053 E5.50170 F1800.000 ; infill
 G1 X98.594 Y74.053 F12000.000 ; move to first infill point
 G1 X97.962 Y70.107 E5.62034 F1800.000 ; infill
 G1 X94.601 Y68.841 F12000.000 ; move to first infill point
 G1 X92.452 Y68.841 E5.72279 F7200.000 ; infill
 G1 X92.452 Y68.267 E5.75011 ; infill
 G1 X94.601 Y68.267 E5.85256 ; infill
 G1 X94.601 Y67.694 E5.87989 ; infill
 G1 X92.452 Y67.694 E5.98234 ; infill
 G1 X92.452 Y67.121 E6.00967 ; infill
 G1 X94.601 Y67.121 E6.11212 ; infill
 G1 X94.601 Y66.548 E6.13944 ; infill
 G1 X92.452 Y66.548 E6.24190 ; infill
 G1 X92.452 Y65.974 E6.26922 ; infill
 G1 X94.601 Y65.974 E6.37167 ; infill
 G1 X94.601 Y65.401 E6.39900 ; infill
 G1 X92.454 Y65.401 E6.50135 ; infill
 G1 X92.458 Y64.828 E6.52868 ; infill
 G1 X94.601 Y64.828 E6.63086 ; infill
 G1 X94.601 Y64.255 E6.65818 ; infill
 G1 X92.461 Y64.255 E6.76019 ; infill
 G1 X92.465 Y63.681 E6.78751 ; infill
 G1 X94.601 Y63.681 E6.88934 ; infill
 G1 X94.601 Y63.108 E6.91666 ; infill
 G1 X92.469 Y63.108 E7.01832 ; infill
 G1 X92.472 Y62.535 E7.04564 ; infill
 G1 X94.601 Y62.535 E7.14712 ; infill
 G1 X94.601 Y61.962 E7.17445 ; infill
 G1 X92.476 Y61.962 E7.27575 ; infill
 G1 X92.480 Y61.388 E7.30308 ; infill
 G1 X94.601 Y61.388 E7.40421 ; infill
 G1 F9600
 G1 X92.480 Y61.388 E6.90032 ; wipe and retract
 G1 F9600
 G1 X92.476 Y61.962 E6.76417 ; wipe and retract
 G1 F9600
 G1 X94.601 Y61.962 E6.25941 ; wipe and retract
 G1 F9600
 G1 X94.601 Y62.535 E6.12326 ; wipe and retract
 G1 F9600
 G1 X92.472 Y62.535 E5.61763 ; wipe and retract
 G1 F9600
 G1 X92.469 Y63.108 E5.48148 ; wipe and retract
 G1 F9600
 G1 X94.601 Y63.108 E4.97497 ; wipe and retract
 G1 F9600
 G1 X94.601 Y63.681 E4.83883 ; wipe and retract
 G1 F9600
 G1 X92.465 Y63.681 E4.33145 ; wipe and retract
 G1 F9600
 G1 X92.461 Y64.255 E4.19530 ; wipe and retract
 G1 F9600
 G1 X94.601 Y64.255 E3.68705 ; wipe and retract
 G1 F9600
 G1 X94.601 Y64.828 E3.55090 ; wipe and retract
 G1 F9600
 G1 X92.458 Y64.828 E3.04178 ; wipe and retract
 G1 F9600
 G1 X92.454 Y65.401 E2.90563 ; wipe and retract
 G1 F9600
 G1 X93.513 Y65.401 E2.65421 ; wipe and retract
 G1 E2.40421 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z8.800 F12000.000 ; lift Z
 G1 X95.608 Y132.215 F12000.000 ; move to first perimeter point
 G1 Z8.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X109.346 Y132.215 E5.40791 F7200.000 ; perimeter
 G1 X109.992 Y136.074 E5.52409 ; perimeter
 G1 X109.992 Y137.923 E5.57898 ; perimeter
 G1 X109.148 Y139.531 E5.63290 ; perimeter
 G1 X107.653 Y140.562 E5.68681 ; perimeter
 G1 X105.814 Y140.785 E5.74183 ; perimeter
 G1 X93.363 Y140.785 E6.11153 ; perimeter
 G1 X91.653 Y140.137 E6.16582 ; perimeter
 G1 X90.449 Y138.778 E6.21974 ; perimeter
 G1 X90.008 Y136.991 E6.27438 ; perimeter
 G1 X90.507 Y59.215 E8.58371 ; perimeter
 G1 X96.608 Y59.215 E8.76486 ; perimeter
 G1 X96.608 Y69.215 E9.06178 ; perimeter
 G1 X98.811 Y69.215 E9.12718 ; perimeter
 G1 X101.085 Y82.815 E9.53659 ; perimeter
 G1 X98.914 Y82.815 E9.60107 ; perimeter
 G1 X97.105 Y71.015 E9.95552 ; perimeter
 G1 X92.884 Y71.015 E10.08084 ; perimeter
 G1 X92.608 Y118.036 E11.47700 ; perimeter
 G1 X92.875 Y119.220 E11.51302 ; perimeter
 G1 X93.635 Y120.155 E11.54880 ; perimeter
 G1 X94.703 Y120.597 E11.58312 ; perimeter
 G1 X101.631 Y120.597 E11.78882 ; perimeter
 G1 X102.742 Y120.450 E11.82208 ; perimeter
 G1 X103.689 Y119.737 E11.85729 ; perimeter
 G1 X104.219 Y118.635 E11.89360 ; perimeter
 G1 X104.219 Y117.425 E11.92952 ; perimeter
 G1 X103.267 Y111.215 E12.11606 ; perimeter
 G1 X105.835 Y111.215 E12.19230 ; perimeter
 G1 X107.942 Y123.815 E12.57160 ; perimeter
 G1 X95.608 Y123.815 E12.93780 ; perimeter
 G1 X95.608 Y132.155 E13.18543 ; perimeter
 G1 X95.608 Y132.615 F12000.000 ; move inwards before travel
 G1 X95.251 Y132.572 F12000.000 ; move to first perimeter point
 G1 X98.451 Y132.572 E13.28044 F7200.000 ; perimeter
 G1 X98.451 Y136.372 E13.39327 ; perimeter
 G1 X105.165 Y136.372 E13.59262 ; perimeter
 G1 X105.165 Y132.572 E13.70545 ; perimeter
 G1 X109.044 Y132.572 E13.82062 ; perimeter
 G1 X109.635 Y136.104 E13.92694 ; perimeter
 G1 X109.635 Y137.835 E13.97834 ; perimeter
 G1 X108.873 Y139.287 E14.02703 ; perimeter
 G1 X107.523 Y140.218 E14.07572 ; perimeter
 G1 X105.792 Y140.428 E14.12749 ; perimeter
 G1 X93.428 Y140.428 E14.49460 ; perimeter
 G1 X91.862 Y139.834 E14.54433 ; perimeter
 G1 X90.774 Y138.607 E14.59302 ; perimeter
 G1 X90.366 Y136.949 E14.64373 ; perimeter
 G1 X90.862 Y59.572 E16.94120 ; perimeter
 G1 X96.251 Y59.572 E17.10122 ; perimeter
 G1 X96.251 Y69.572 E17.39813 ; perimeter
 G1 X98.509 Y69.572 E17.46517 ; perimeter
 G1 X100.664 Y82.458 E17.85308 ; perimeter
 G1 X99.220 Y82.458 E17.89594 ; perimeter
 G1 X97.411 Y70.658 E18.25039 ; perimeter
 G1 X92.529 Y70.658 E18.39534 ; perimeter
 G1 X92.251 Y118.075 E19.80325 ; perimeter
 G1 X92.545 Y119.380 E19.84297 ; perimeter
 G1 X93.415 Y120.451 E19.88392 ; perimeter
 G1 X94.632 Y120.954 E19.92304 ; perimeter
 G1 X101.655 Y120.954 E20.13154 ; perimeter
 G1 X102.881 Y120.792 E20.16828 ; perimeter
 G1 X103.973 Y119.970 E20.20886 ; perimeter
 G1 X104.576 Y118.716 E20.25016 ; perimeter
 G1 X104.576 Y117.398 E20.28931 ; perimeter
 G1 X103.683 Y111.572 E20.46431 ; perimeter
 G1 X105.532 Y111.572 E20.51921 ; perimeter
 G1 X107.520 Y123.458 E20.87702 ; perimeter
 G1 X95.251 Y123.458 E21.24130 ; perimeter
 G1 X95.251 Y132.512 E21.51013 ; perimeter
 G1 X94.894 Y132.929 F12000.000 ; move to first perimeter point
 G1 X98.094 Y132.929 E21.60514 F7200.000 ; perimeter
 G1 X98.094 Y136.729 E21.71797 ; perimeter
 G1 X105.522 Y136.729 E21.93853 ; perimeter
 G1 X105.522 Y132.929 E22.05135 ; perimeter
 G1 X108.742 Y132.929 E22.14695 ; perimeter
 G1 X109.278 Y136.133 E22.24341 ; perimeter
 G1 X109.278 Y137.747 E22.29132 ; perimeter
 G1 X108.597 Y139.043 E22.33478 ; perimeter
 G1 X107.393 Y139.874 E22.37825 ; perimeter
 G1 X105.771 Y140.071 E22.42676 ; perimeter
 G1 X93.493 Y140.071 E22.79128 ; perimeter
 G1 X92.071 Y139.532 E22.83646 ; perimeter
 G1 X91.100 Y138.436 E22.87993 ; perimeter
 G1 X90.723 Y136.906 E22.92670 ; perimeter
 G1 X91.216 Y59.929 E25.21231 ; perimeter
 G1 X95.894 Y59.929 E25.35120 ; perimeter
 G1 X95.894 Y69.929 E25.64811 ; perimeter
 G1 X98.206 Y69.929 E25.71677 ; perimeter
 G1 X100.242 Y82.100 E26.08318 ; perimeter
 G1 X99.527 Y82.100 E26.10442 ; perimeter
 G1 X97.718 Y70.300 E26.45887 ; perimeter
 G1 X92.174 Y70.300 E26.62346 ; perimeter
 G1 X91.893 Y118.114 E28.04313 ; perimeter
 G1 X92.216 Y119.540 E28.08654 ; perimeter
 G1 X93.195 Y120.746 E28.13266 ; perimeter
 G1 X94.561 Y121.311 E28.17657 ; perimeter
 G1 X101.678 Y121.311 E28.38788 ; perimeter
 G1 X103.021 Y121.133 E28.42811 ; perimeter
 G1 X104.257 Y120.203 E28.47404 ; perimeter
 G1 X104.933 Y118.797 E28.52034 ; perimeter
 G1 X104.933 Y117.371 E28.56271 ; perimeter
 G1 X104.099 Y111.929 E28.72617 ; perimeter
 G1 X105.230 Y111.929 E28.75975 ; perimeter
 G1 X107.098 Y123.100 E29.09606 ; perimeter
 G1 X94.894 Y123.100 E29.45842 ; perimeter
 G1 X94.894 Y132.869 E29.74845 ; perimeter
 G1 X94.537 Y133.286 F12000.000 ; move to first perimeter point
 G1 X97.737 Y133.286 E29.84347 F7200.000 ; perimeter
 G1 X97.737 Y137.086 E29.95629 ; perimeter
 G1 X105.879 Y137.086 E30.19805 ; perimeter
 G1 X105.879 Y133.286 E30.31088 ; perimeter
 G1 X108.440 Y133.286 E30.38689 ; perimeter
 G1 X108.921 Y136.163 E30.47350 ; perimeter
 G1 X108.921 Y137.659 E30.51791 ; perimeter
 G1 X108.322 Y138.799 E30.55615 ; perimeter
 G1 X107.262 Y139.530 E30.59439 ; perimeter
 G1 X105.749 Y139.714 E30.63965 ; perimeter
 G1 X93.559 Y139.714 E31.00159 ; perimeter
 G1 X92.280 Y139.229 E31.04221 ; perimeter
 G1 X91.426 Y138.265 E31.08045 ; perimeter
 G1 X91.080 Y136.864 E31.12329 ; perimeter
 G1 X91.571 Y60.286 E33.39705 ; perimeter
 G1 X95.537 Y60.286 E33.51479 ; perimeter
 G1 X95.537 Y69.943 E33.80153 ; perimeter
 G1 X91.819 Y69.943 E33.91191 ; perimeter
 G1 X91.536 Y118.153 E35.34334 ; perimeter
 G1 X91.886 Y119.700 E35.39044 ; perimeter
 G1 X92.975 Y121.041 E35.44173 ; perimeter
 G1 X94.490 Y121.668 E35.49044 ; perimeter
 G1 X101.702 Y121.668 E35.70455 ; perimeter
 G1 X103.161 Y121.475 E35.74826 ; perimeter
 G1 X104.541 Y120.436 E35.79956 ; perimeter
 G1 X105.290 Y118.879 E35.85086 ; perimeter
 G1 X105.290 Y117.343 E35.89645 ; perimeter
 G1 X104.515 Y112.286 E36.04837 ; perimeter
 G1 X104.928 Y112.286 E36.06062 ; perimeter
 G1 X106.677 Y122.743 E36.37543 ; perimeter
 G1 X94.537 Y122.743 E36.73587 ; perimeter
 G1 X94.537 Y133.226 E37.04711 ; perimeter
 G1 F9600
 G1 X97.737 Y133.286 E36.28697 ; wipe and retract
 G1 F9600
 G1 X97.737 Y137.086 E35.38447 ; wipe and retract
 G1 F9600
 G1 X105.879 Y137.086 E33.45064 ; wipe and retract
 G1 F9600
 G1 X105.879 Y133.286 E32.54814 ; wipe and retract
 G1 F9600
 G1 X106.936 Y133.286 E32.29711 ; wipe and retract
 G1 E32.04711 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.000 F12000.000 ; lift Z
 G1 X95.180 Y69.586 F12000.000 ; move to first perimeter point
 G1 Z8.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.869 Y69.586 E5.09831 F7200.000 ; perimeter
 G1 X91.926 Y60.643 E5.36386 ; perimeter
 G1 X95.180 Y60.643 E5.46047 ; perimeter
 G1 X95.180 Y69.526 E5.72422 ; perimeter
 G1 X94.823 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.228 Y69.229 E5.80126 F7200.000 ; perimeter
 G1 X92.281 Y61.000 E6.04560 ; perimeter
 G1 X94.823 Y61.000 E6.12108 ; perimeter
 G1 X94.823 Y69.169 E6.36363 ; perimeter
 G1 F9600
 G1 X92.228 Y69.229 E5.74724 ; wipe and retract
 G1 F9600
 G1 X92.281 Y61.000 E3.79276 ; wipe and retract
 G1 F9600
 G1 X94.823 Y61.000 E3.18906 ; wipe and retract
 G1 F9600
 G1 X94.823 Y67.633 E1.61363 ; wipe and retract
 G1 E1.36363 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.000 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z8.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X106.236 Y137.443 E5.80503 ; perimeter
 G1 X106.236 Y133.643 E5.91785 ; perimeter
 G1 X108.137 Y133.643 E5.97429 ; perimeter
 G1 X108.564 Y136.193 E6.05104 ; perimeter
 G1 X108.564 Y137.571 E6.09196 ; perimeter
 G1 X108.047 Y138.555 E6.12497 ; perimeter
 G1 X107.132 Y139.187 E6.15798 ; perimeter
 G1 X105.728 Y139.357 E6.19998 ; perimeter
 G1 X93.624 Y139.357 E6.55934 ; perimeter
 G1 X92.488 Y138.926 E6.59541 ; perimeter
 G1 X91.751 Y138.094 E6.62842 ; perimeter
 G1 X91.438 Y136.822 E6.66732 ; perimeter
 G1 X91.546 Y119.849 E7.17128 ; perimeter
 G1 X92.754 Y121.337 E7.22818 ; perimeter
 G1 X94.419 Y122.025 E7.28168 ; perimeter
 G1 X101.725 Y122.025 E7.49860 ; perimeter
 G1 X103.301 Y121.817 E7.54579 ; perimeter
 G1 X104.825 Y120.669 E7.60245 ; perimeter
 G1 X105.561 Y119.141 E7.65279 ; perimeter
 G1 X105.716 Y119.163 E7.65745 ; perimeter
 G1 X106.255 Y122.386 E7.75447 ; perimeter
 G1 X94.240 Y122.386 E8.11121 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E8.11579 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E8.16422 ; perimeter
 G1 X105.394 Y120.311 E8.18370 ; perimeter
 G1 X105.549 Y120.333 E8.18835 ; perimeter
 G1 X105.833 Y122.029 E8.23942 ; perimeter
 G1 X103.916 Y122.029 E8.29635 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E8.25303 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.86567 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E7.70986 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E7.67261 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E7.26411 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.80872 ; wipe and retract
 G1 E3.29635 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.000 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z8.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X106.593 Y137.800 E5.49201 ; perimeter
 G1 X106.593 Y134.000 E5.60483 ; perimeter
 G1 X107.835 Y134.000 E5.64169 ; perimeter
 G1 X108.207 Y136.222 E5.70859 ; perimeter
 G1 X108.207 Y137.482 E5.74601 ; perimeter
 G1 X107.772 Y138.311 E5.77380 ; perimeter
 G1 X107.001 Y138.843 E5.80158 ; perimeter
 G1 X105.706 Y139.000 E5.84033 ; perimeter
 G1 X93.690 Y139.000 E6.19710 ; perimeter
 G1 X92.697 Y138.624 E6.22862 ; perimeter
 G1 X92.077 Y137.923 E6.25640 ; perimeter
 G1 X91.795 Y136.780 E6.29137 ; perimeter
 G1 X91.897 Y120.847 E6.76443 ; perimeter
 G1 X92.534 Y121.632 E6.79444 ; perimeter
 G1 X93.823 Y122.165 E6.83584 ; perimeter
 G1 X93.823 Y133.940 E7.18545 ; perimeter
 G1 X98.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 X104.808 Y133.015 E7.36360 F7200.000 ; perimeter
 G1 X104.808 Y136.015 E7.45268 ; perimeter
 G1 X98.808 Y136.015 E7.63082 ; perimeter
 G1 X98.808 Y133.075 E7.71812 ; perimeter
 G1 X98.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X104.987 Y132.615 E8.11830 F1800.000 ; infill
 G1 X107.157 Y134.221 F12000.000 ; move to first infill point
 G1 X107.157 Y138.455 E8.35105 F7200.000 ; infill
 G1 X106.496 Y138.700 E8.38982 ; infill
 G1 X106.496 Y138.001 E8.42823 ; infill
 G1 X105.834 Y138.001 E8.46458 ; infill
 G1 X105.834 Y138.779 E8.50732 ; infill
 G1 X105.173 Y138.779 E8.54367 ; infill
 G1 X105.173 Y138.001 E8.58640 ; infill
 G1 X107.818 Y137.597 F12000.000 ; move to first infill point
 G1 X107.818 Y135.966 E8.67606 F7200.000 ; infill
 G1 X104.805 Y138.135 F12000.000 ; move to first infill point
 M106 S255 ; enable fan
 G1 X98.812 Y138.135 E9.12711 F1680.000 ; infill
 G1 X98.812 Y138.665 E9.16700 ; infill
 G1 X104.805 Y138.665 E9.61805 ; infill
 M106 S239.7 ; enable fan
 G1 F9600
 G1 X98.812 Y138.665 E8.19468 ; wipe and retract
 G1 F9600
 G1 X98.812 Y138.135 E8.06878 ; wipe and retract
 G1 F9600
 G1 X104.805 Y138.135 E6.64541 ; wipe and retract
 G1 E4.61805 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.000 F12000.000 ; lift Z
 G1 X98.443 Y138.779 F12000.000 ; move to first infill point
 G1 Z8.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.443 Y138.001 E5.03677 F7200.000 ; infill
 G1 X97.874 Y138.001 E5.06370 ; infill
 G1 X97.874 Y138.779 E5.10047 ; infill
 G1 X97.305 Y138.779 E5.12739 ; infill
 G1 X97.305 Y138.001 E5.16417 ; infill
 G1 X96.736 Y138.001 E5.19109 ; infill
 G1 X96.736 Y138.779 E5.22786 ; infill
 G1 X96.167 Y138.779 E5.25478 ; infill
 G1 X96.167 Y134.201 E5.47135 ; infill
 G1 X95.598 Y134.201 E5.49827 ; infill
 G1 X95.598 Y138.779 E5.71484 ; infill
 G1 X95.029 Y138.779 E5.74176 ; infill
 G1 X95.029 Y134.201 E5.95832 ; infill
 G1 X94.460 Y134.201 E5.98525 ; infill
 G1 X94.460 Y138.779 E6.20181 ; infill
 G1 X93.891 Y138.779 E6.22873 ; infill
 G1 X93.891 Y134.201 E6.44530 ; infill
 G1 X92.184 Y133.448 F12000.000 ; move to first infill point
 G1 X92.184 Y136.985 E6.61263 F7200.000 ; infill
 G1 X92.753 Y138.298 F12000.000 ; move to first infill point
 G1 X92.753 Y121.954 E7.38590 F7200.000 ; infill
 G1 X93.322 Y122.189 E7.41504 ; infill
 G1 X93.322 Y138.633 E8.19306 ; infill
 G1 F9600
 G1 X93.322 Y122.189 E4.28761 ; wipe and retract
 G1 F9600
 G1 X92.753 Y121.954 E4.14136 ; wipe and retract
 G1 F9600
 G1 X92.753 Y124.894 E3.44306 ; wipe and retract
 G1 E3.19306 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.000 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z8.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X104.774 Y121.808 F12000.000 ; move to first infill point
 G1 X104.774 Y121.449 E5.07163 F7200.000 ; infill
 G1 X105.374 Y121.352 E5.10194 ; infill
 G1 X105.374 Y121.808 E5.12466 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.931 E5.19069 F1800.000 ; infill
 G1 X105.579 Y117.931 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.20886 F1800.000 ; infill
 G1 X104.750 Y112.464 E5.35489 ; infill
 G1 F9600
 G1 X105.528 Y117.321 E4.18681 ; wipe and retract
 G1 F9600
 G1 X105.579 Y117.931 E4.04146 ; wipe and retract
 G1 E0.35489 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.000 F12000.000 ; lift Z
 G1 X91.388 Y118.357 F12000.000 ; move to first infill point
 G1 Z8.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.491 Y119.308 E5.02840 F1800.000 ; infill
 G1 X91.703 Y119.744 E5.04280 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E4.92765 ; wipe and retract
 G1 F9600
 G1 X91.388 Y118.357 E4.70044 ; wipe and retract
 G1 E0.04280 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.000 F12000.000 ; lift Z
 G1 X99.855 Y81.922 F12000.000 ; move to first infill point
 G1 Z8.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.594 Y74.053 E5.50169 F1800.000 ; infill
 G1 X97.962 Y70.107 E5.62034 F1800.000 ; infill
 G1 X94.434 Y69.008 F12000.000 ; move to first infill point
 G1 X94.434 Y61.221 E6.01207 F7200.000 ; infill
 G1 X93.829 Y61.221 E6.04251 ; infill
 G1 X93.829 Y69.008 E6.43425 ; infill
 G1 X93.224 Y69.008 E6.46469 ; infill
 G1 X93.224 Y61.221 E6.85643 ; infill
 G1 X92.619 Y65.552 F12000.000 ; move to first infill point
 G1 X92.619 Y69.008 E7.03028 F7200.000 ; infill
 G1 F9600
 G1 X92.619 Y65.552 E6.20957 ; wipe and retract
 G1 E2.03028 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.000 F12000.000 ; lift Z
 G1 X101.979 Y102.815 F12000.000 ; move to first perimeter point
 G1 Z8.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X100.201 Y91.215 E5.34844 F7200.000 ; perimeter
 G1 X102.490 Y91.215 E5.41640 ; perimeter
 G1 X104.430 Y102.815 E5.76560 ; perimeter
 G1 X102.039 Y102.815 E5.83658 ; perimeter
 G1 X102.143 Y102.450 F12000.000 ; move inwards before travel
 G1 X102.286 Y102.458 F12000.000 ; move to first perimeter point
 G1 X100.617 Y91.572 E6.16357 F7200.000 ; perimeter
 G1 X102.188 Y91.572 E6.21020 ; perimeter
 G1 X104.008 Y102.458 E6.53790 ; perimeter
 G1 X102.346 Y102.458 E6.58725 ; perimeter
 G1 X102.593 Y102.100 F12000.000 ; move to first perimeter point
 G1 X101.033 Y91.929 E6.89279 F7200.000 ; perimeter
 G1 X101.885 Y91.929 E6.91809 ; perimeter
 G1 X103.586 Y102.100 E7.22430 ; perimeter
 G1 X102.653 Y102.100 E7.25203 ; perimeter
 G1 X102.899 Y101.743 F12000.000 ; move to first perimeter point
 G1 X102.350 Y98.160 E7.35966 F7200.000 ; perimeter
 G1 X102.560 Y98.127 E7.36598 ; perimeter
 G1 X103.165 Y101.743 E7.47486 ; perimeter
 G1 X102.959 Y101.743 E7.48097 ; perimeter
 G1 X102.427 Y97.967 F12000.000 ; move to first infill point
 G1 X101.487 Y92.107 E7.85455 F1800.000 ; infill
 M106 S226.95 ; enable fan
 G1 F9600
 G1 X102.427 Y97.967 E6.44510 ; wipe and retract
 G1 E2.85455 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.000 F12000.000 ; lift Z
 G1 X95.608 Y123.815 F12000.000 ; move to first perimeter point
 G1 Z8.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X95.608 Y132.215 E5.24941 F7200.000 ; perimeter
 G1 X109.346 Y132.215 E5.65732 ; perimeter
 G1 X109.992 Y136.074 E5.77350 ; perimeter
 G1 X109.992 Y137.923 E5.82839 ; perimeter
 G1 X109.148 Y139.531 E5.88230 ; perimeter
 G1 X107.653 Y140.562 E5.93622 ; perimeter
 G1 X105.814 Y140.785 E5.99124 ; perimeter
 G1 X93.363 Y140.785 E6.36094 ; perimeter
 G1 X91.653 Y140.137 E6.41523 ; perimeter
 G1 X90.449 Y138.778 E6.46915 ; perimeter
 G1 X90.008 Y136.991 E6.52379 ; perimeter
 G1 X90.507 Y59.215 E8.83311 ; perimeter
 G1 X96.608 Y59.215 E9.01427 ; perimeter
 G1 X96.608 Y69.215 E9.31118 ; perimeter
 G1 X98.811 Y69.215 E9.37659 ; perimeter
 G1 X101.152 Y83.215 E9.79804 ; perimeter
 M106 S255 ; enable fan
 G1 X102.423 Y90.815 E10.20062 F1680.000 ; perimeter
 M106 S226.95 ; enable fan
 G1 X104.497 Y103.215 E10.57390 F7200.000 ; perimeter
 M106 S255 ; enable fan
 G1 X105.768 Y110.815 E10.97648 F1680.000 ; perimeter
 M106 S226.95 ; enable fan
 G1 X107.942 Y123.815 E11.36782 F7200.000 ; perimeter
 G1 X95.668 Y123.815 E11.73224 ; perimeter
 G1 X95.208 Y123.815 F12000.000 ; move inwards before travel
 G1 X95.251 Y123.458 F12000.000 ; move to first perimeter point
 G1 X95.251 Y132.572 E12.00286 F7200.000 ; perimeter
 G1 X98.451 Y132.572 E12.09787 ; perimeter
 G1 X98.451 Y136.372 E12.21069 ; perimeter
 G1 X105.165 Y136.372 E12.41005 ; perimeter
 G1 X105.165 Y132.572 E12.52287 ; perimeter
 G1 X109.044 Y132.572 E12.63804 ; perimeter
 G1 X109.635 Y136.104 E12.74437 ; perimeter
 G1 X109.635 Y137.835 E12.79576 ; perimeter
 G1 X108.873 Y139.287 E12.84445 ; perimeter
 G1 X107.523 Y140.218 E12.89315 ; perimeter
 G1 X105.792 Y140.428 E12.94491 ; perimeter
 G1 X93.428 Y140.428 E13.31202 ; perimeter
 G1 X91.862 Y139.834 E13.36176 ; perimeter
 G1 X90.774 Y138.607 E13.41045 ; perimeter
 G1 X90.366 Y136.949 E13.46115 ; perimeter
 G1 X90.862 Y59.572 E15.75863 ; perimeter
 G1 X96.251 Y59.572 E15.91864 ; perimeter
 G1 X96.251 Y69.572 E16.21556 ; perimeter
 G1 X98.509 Y69.572 E16.28259 ; perimeter
 G1 X100.790 Y83.215 E16.69329 ; perimeter
 M106 S255 ; enable fan
 G1 X102.061 Y90.815 E17.09587 F1680.000 ; perimeter
 M106 S226.95 ; enable fan
 G1 X104.135 Y103.215 E17.46915 F7200.000 ; perimeter
 M106 S255 ; enable fan
 G1 X105.406 Y110.815 E17.87173 F1680.000 ; perimeter
 M106 S226.95 ; enable fan
 G1 X107.520 Y123.458 E18.25233 F7200.000 ; perimeter
 G1 X95.311 Y123.458 E18.61483 ; perimeter
 G1 X94.894 Y123.100 F12000.000 ; move to first perimeter point
 G1 X94.894 Y132.929 E18.90664 F7200.000 ; perimeter
 G1 X98.094 Y132.929 E19.00165 ; perimeter
 G1 X98.094 Y136.729 E19.11448 ; perimeter
 G1 X105.522 Y136.729 E19.33504 ; perimeter
 G1 X105.522 Y132.929 E19.44786 ; perimeter
 G1 X108.742 Y132.929 E19.54346 ; perimeter
 G1 X109.278 Y136.133 E19.63992 ; perimeter
 G1 X109.278 Y137.747 E19.68783 ; perimeter
 G1 X108.597 Y139.043 E19.73129 ; perimeter
 G1 X107.393 Y139.874 E19.77476 ; perimeter
 G1 X105.771 Y140.071 E19.82327 ; perimeter
 G1 X93.493 Y140.071 E20.18779 ; perimeter
 G1 X92.071 Y139.532 E20.23297 ; perimeter
 G1 X91.100 Y138.436 E20.27644 ; perimeter
 G1 X90.723 Y136.906 E20.32321 ; perimeter
 G1 X91.216 Y59.929 E22.60882 ; perimeter
 G1 X95.894 Y59.929 E22.74771 ; perimeter
 G1 X95.894 Y69.929 E23.04462 ; perimeter
 G1 X98.206 Y69.929 E23.11328 ; perimeter
 G1 X100.428 Y83.215 E23.51323 ; perimeter
 M106 S255 ; enable fan
 G1 X101.699 Y90.815 E23.91581 F1680.000 ; perimeter
 M106 S226.95 ; enable fan
 G1 X103.773 Y103.215 E24.28909 F7200.000 ; perimeter
 M106 S255 ; enable fan
 G1 X105.044 Y110.815 E24.69166 F1680.000 ; perimeter
 M106 S226.95 ; enable fan
 G1 X107.098 Y123.100 E25.06151 F7200.000 ; perimeter
 G1 X94.954 Y123.100 E25.42209 ; perimeter
 G1 X94.537 Y122.743 F12000.000 ; move to first perimeter point
 G1 X94.537 Y133.286 E25.73511 F7200.000 ; perimeter
 G1 X97.737 Y133.286 E25.83013 ; perimeter
 G1 X97.737 Y137.086 E25.94295 ; perimeter
 G1 X105.879 Y137.086 E26.18471 ; perimeter
 G1 X105.879 Y133.286 E26.29754 ; perimeter
 G1 X108.440 Y133.286 E26.37355 ; perimeter
 G1 X108.921 Y136.163 E26.46016 ; perimeter
 G1 X108.921 Y137.659 E26.50457 ; perimeter
 G1 X108.322 Y138.799 E26.54281 ; perimeter
 G1 X107.262 Y139.530 E26.58105 ; perimeter
 G1 X105.749 Y139.714 E26.62631 ; perimeter
 G1 X93.559 Y139.714 E26.98825 ; perimeter
 G1 X92.280 Y139.229 E27.02887 ; perimeter
 G1 X91.426 Y138.265 E27.06711 ; perimeter
 G1 X91.080 Y136.864 E27.10995 ; perimeter
 G1 X91.571 Y60.286 E29.38371 ; perimeter
 G1 X95.537 Y60.286 E29.50145 ; perimeter
 G1 X95.537 Y69.943 E29.78820 ; perimeter
 G1 X91.819 Y69.943 E29.89857 ; perimeter
 G1 X91.536 Y118.153 E31.33000 ; perimeter
 G1 X91.886 Y119.700 E31.37710 ; perimeter
 G1 X92.975 Y121.041 E31.42840 ; perimeter
 G1 X94.490 Y121.668 E31.47710 ; perimeter
 G1 X101.702 Y121.668 E31.69121 ; perimeter
 G1 X103.161 Y121.475 E31.73492 ; perimeter
 G1 X104.541 Y120.436 E31.78622 ; perimeter
 G1 X105.290 Y118.879 E31.83752 ; perimeter
 G1 X105.290 Y117.343 E31.88311 ; perimeter
 G1 X104.290 Y110.815 E32.07922 ; perimeter
 M106 S255 ; enable fan
 G1 X103.125 Y103.215 E32.48092 F1680.000 ; perimeter
 M106 S226.95 ; enable fan
 G1 X102.350 Y98.162 E32.63269 F7200.000 ; perimeter
 G1 X102.560 Y98.128 E32.63901 ; perimeter
 G1 X103.411 Y103.215 E32.79212 ; perimeter
 M106 S255 ; enable fan
 G1 X104.682 Y110.815 E33.19469 F1680.000 ; perimeter
 M106 S226.95 ; enable fan
 G1 X106.677 Y122.743 E33.55379 F7200.000 ; perimeter
 G1 X94.597 Y122.743 E33.91245 ; perimeter
 G1 F9600
 G1 X94.537 Y133.286 E31.40857 ; wipe and retract
 G1 F9600
 G1 X97.737 Y133.286 E30.64857 ; wipe and retract
 G1 F9600
 G1 X97.737 Y137.086 E29.74607 ; wipe and retract
 G1 F9600
 G1 X100.194 Y137.086 E29.16245 ; wipe and retract
 G1 E28.91245 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.200 F12000.000 ; lift Z
 G1 X95.180 Y69.586 F12000.000 ; move to first perimeter point
 G1 Z8.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.869 Y69.586 E5.09831 F7200.000 ; perimeter
 G1 X91.926 Y60.643 E5.36386 ; perimeter
 G1 X95.180 Y60.643 E5.46047 ; perimeter
 G1 X95.180 Y69.526 E5.72422 ; perimeter
 G1 X94.823 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.228 Y69.229 E5.80126 F7200.000 ; perimeter
 G1 X92.281 Y61.000 E6.04560 ; perimeter
 G1 X94.823 Y61.000 E6.12108 ; perimeter
 G1 X94.823 Y69.169 E6.36363 ; perimeter
 G1 F9600
 G1 X92.228 Y69.229 E5.74724 ; wipe and retract
 G1 F9600
 G1 X92.281 Y61.000 E3.79276 ; wipe and retract
 G1 F9600
 G1 X94.823 Y61.000 E3.18906 ; wipe and retract
 G1 F9600
 G1 X94.823 Y67.633 E1.61363 ; wipe and retract
 G1 E1.36363 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.200 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z8.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X106.236 Y137.443 E5.80503 ; perimeter
 G1 X106.236 Y133.643 E5.91785 ; perimeter
 G1 X108.137 Y133.643 E5.97429 ; perimeter
 G1 X108.564 Y136.193 E6.05104 ; perimeter
 G1 X108.564 Y137.571 E6.09196 ; perimeter
 G1 X108.047 Y138.555 E6.12497 ; perimeter
 G1 X107.132 Y139.187 E6.15798 ; perimeter
 G1 X105.728 Y139.357 E6.19998 ; perimeter
 G1 X93.624 Y139.357 E6.55934 ; perimeter
 G1 X92.488 Y138.926 E6.59541 ; perimeter
 G1 X91.751 Y138.094 E6.62842 ; perimeter
 G1 X91.438 Y136.822 E6.66732 ; perimeter
 G1 X91.546 Y119.849 E7.17128 ; perimeter
 G1 X92.754 Y121.337 E7.22818 ; perimeter
 G1 X94.419 Y122.025 E7.28168 ; perimeter
 G1 X101.725 Y122.025 E7.49860 ; perimeter
 G1 X103.301 Y121.817 E7.54579 ; perimeter
 G1 X104.825 Y120.669 E7.60245 ; perimeter
 G1 X105.561 Y119.141 E7.65279 ; perimeter
 G1 X105.716 Y119.163 E7.65745 ; perimeter
 G1 X106.255 Y122.386 E7.75447 ; perimeter
 G1 X94.240 Y122.386 E8.11121 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E8.11579 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E8.16422 ; perimeter
 G1 X105.394 Y120.311 E8.18370 ; perimeter
 G1 X105.549 Y120.333 E8.18835 ; perimeter
 G1 X105.833 Y122.029 E8.23942 ; perimeter
 G1 X103.916 Y122.029 E8.29635 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E8.25304 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.86568 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E7.70986 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E7.67261 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E7.26411 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.80871 ; wipe and retract
 G1 E3.29635 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.200 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z8.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X106.593 Y137.800 E5.49201 ; perimeter
 G1 X106.593 Y134.000 E5.60483 ; perimeter
 G1 X107.835 Y134.000 E5.64169 ; perimeter
 G1 X108.207 Y136.222 E5.70859 ; perimeter
 G1 X108.207 Y137.482 E5.74601 ; perimeter
 G1 X107.772 Y138.311 E5.77380 ; perimeter
 G1 X107.001 Y138.843 E5.80158 ; perimeter
 G1 X105.706 Y139.000 E5.84033 ; perimeter
 G1 X93.690 Y139.000 E6.19710 ; perimeter
 G1 X92.697 Y138.624 E6.22862 ; perimeter
 G1 X92.077 Y137.923 E6.25640 ; perimeter
 G1 X91.795 Y136.780 E6.29137 ; perimeter
 G1 X91.897 Y120.847 E6.76443 ; perimeter
 G1 X92.534 Y121.632 E6.79444 ; perimeter
 G1 X93.823 Y122.165 E6.83584 ; perimeter
 G1 X93.823 Y133.940 E7.18545 ; perimeter
 G1 F9600
 G1 X97.023 Y134.000 E6.42532 ; wipe and retract
 G1 F9600
 G1 X97.023 Y137.800 E5.52282 ; wipe and retract
 G1 F9600
 G1 X106.593 Y137.800 E3.24976 ; wipe and retract
 G1 F9600
 G1 X106.593 Y134.371 E2.43545 ; wipe and retract
 G1 E2.18545 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.200 F12000.000 ; lift Z
 G1 X92.884 Y71.015 F12000.000 ; move to first perimeter point
 G1 Z8.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.105 Y71.015 E5.12531 F7200.000 ; perimeter
 G1 X98.975 Y83.215 E5.49178 ; perimeter
 M106 S255 ; enable fan
 G1 X100.140 Y90.815 E5.89348 F1680.000 ; perimeter
 M106 S226.95 ; enable fan
 G1 X102.041 Y103.215 E6.26595 F7200.000 ; perimeter
 M106 S255 ; enable fan
 G1 X103.206 Y110.815 E6.66765 F1680.000 ; perimeter
 M106 S226.95 ; enable fan
 G1 X104.219 Y117.425 E6.86621 F7200.000 ; perimeter
 G1 X104.219 Y118.635 E6.90213 ; perimeter
 G1 X103.689 Y119.737 E6.93844 ; perimeter
 G1 X102.742 Y120.450 E6.97365 ; perimeter
 G1 X101.631 Y120.597 E7.00691 ; perimeter
 G1 X94.703 Y120.597 E7.21261 ; perimeter
 G1 X93.635 Y120.155 E7.24693 ; perimeter
 G1 X92.875 Y119.220 E7.28271 ; perimeter
 G1 X92.608 Y118.036 E7.31873 ; perimeter
 G1 X92.884 Y71.075 E8.71311 ; perimeter
 G1 X92.885 Y70.615 F12000.000 ; move inwards before travel
 G1 X92.529 Y70.658 F12000.000 ; move to first perimeter point
 G1 X97.411 Y70.658 E8.85806 F7200.000 ; perimeter
 G1 X99.336 Y83.215 E9.23526 ; perimeter
 M106 S255 ; enable fan
 G1 X100.501 Y90.815 E9.63695 F1680.000 ; perimeter
 M106 S226.95 ; enable fan
 G1 X102.402 Y103.215 E10.00943 F7200.000 ; perimeter
 M106 S255 ; enable fan
 G1 X103.567 Y110.815 E10.41113 F1680.000 ; perimeter
 M106 S226.95 ; enable fan
 G1 X104.576 Y117.398 E10.60887 F7200.000 ; perimeter
 G1 X104.576 Y118.716 E10.64801 ; perimeter
 G1 X103.973 Y119.970 E10.68932 ; perimeter
 G1 X102.881 Y120.792 E10.72989 ; perimeter
 G1 X101.655 Y120.954 E10.76664 ; perimeter
 G1 X94.632 Y120.954 E10.97514 ; perimeter
 G1 X93.415 Y120.451 E11.01426 ; perimeter
 G1 X92.545 Y119.380 E11.05521 ; perimeter
 G1 X92.251 Y118.075 E11.09492 ; perimeter
 G1 X92.529 Y70.718 E12.50106 ; perimeter
 G1 X92.174 Y70.300 F12000.000 ; move to first perimeter point
 G1 X97.718 Y70.300 E12.66565 F7200.000 ; perimeter
 G1 X99.697 Y83.215 E13.05357 ; perimeter
 M106 S255 ; enable fan
 G1 X100.862 Y90.815 E13.45527 F1680.000 ; perimeter
 M106 S226.95 ; enable fan
 G1 X102.763 Y103.215 E13.82774 F7200.000 ; perimeter
 M106 S255 ; enable fan
 G1 X103.928 Y110.815 E14.22944 F1680.000 ; perimeter
 M106 S226.95 ; enable fan
 G1 X104.933 Y117.371 E14.42637 F7200.000 ; perimeter
 G1 X104.933 Y118.797 E14.46874 ; perimeter
 G1 X104.257 Y120.203 E14.51504 ; perimeter
 G1 X103.021 Y121.133 E14.56097 ; perimeter
 G1 X101.678 Y121.311 E14.60120 ; perimeter
 G1 X94.561 Y121.311 E14.81251 ; perimeter
 G1 X93.195 Y120.746 E14.85642 ; perimeter
 G1 X92.216 Y119.540 E14.90254 ; perimeter
 G1 X91.893 Y118.114 E14.94595 ; perimeter
 G1 X92.174 Y70.360 E16.36384 ; perimeter
 G1 F9600
 G1 X97.718 Y70.300 E15.04709 ; wipe and retract
 G1 F9600
 G1 X99.697 Y83.215 E11.94415 ; wipe and retract
 G1 E11.36384 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.200 F12000.000 ; lift Z
 G1 X98.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z8.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X104.808 Y133.015 E5.17815 F7200.000 ; perimeter
 G1 X104.808 Y136.015 E5.26722 ; perimeter
 G1 X98.808 Y136.015 E5.44537 ; perimeter
 G1 X98.808 Y133.075 E5.53266 ; perimeter
 G1 X98.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X104.987 Y132.615 E5.93285 F1800.000 ; infill
 G1 X107.726 Y134.586 F12000.000 ; move to first infill point
 G1 X106.795 Y134.586 E5.97739 F7200.000 ; infill
 G1 X106.795 Y135.161 E6.00489 ; infill
 G1 X107.823 Y135.161 E6.05403 ; infill
 G1 X107.919 Y135.736 E6.08192 ; infill
 G1 X106.795 Y135.736 E6.13566 ; infill
 G1 X106.795 Y136.311 E6.16316 ; infill
 G1 X107.985 Y136.311 E6.22008 ; infill
 G1 X107.985 Y136.886 E6.24758 ; infill
 G1 X106.795 Y136.886 E6.30450 ; infill
 G1 X106.795 Y137.461 E6.33200 ; infill
 G1 X107.969 Y137.461 E6.38812 ; infill
 G1 X107.667 Y138.036 E6.41918 ; infill
 G1 X106.795 Y138.036 E6.46087 ; infill
 G1 X106.015 Y138.612 E6.50720 ; infill
 G1 X93.538 Y138.612 E7.10389 ; infill
 G1 X96.821 Y138.036 F12000.000 ; move to first infill point
 G1 X92.502 Y138.036 E7.31042 F7200.000 ; infill
 G1 X92.175 Y137.461 E7.34205 ; infill
 G1 X96.821 Y137.461 E7.56422 ; infill
 G1 X96.821 Y136.886 E7.59172 ; infill
 G1 X92.034 Y136.886 E7.82067 ; infill
 G1 X92.017 Y136.311 E7.84818 ; infill
 G1 X96.821 Y136.311 E8.07794 ; infill
 G1 X96.821 Y135.736 E8.10544 ; infill
 G1 X92.017 Y135.736 E8.33519 ; infill
 G1 X92.017 Y135.161 E8.36269 ; infill
 G1 X96.821 Y135.161 E8.59245 ; infill
 G1 X96.821 Y134.586 E8.61995 ; infill
 G1 X92.017 Y134.586 E8.84971 ; infill
 G1 X93.621 Y134.011 F12000.000 ; move to first infill point
 G1 X92.017 Y134.011 E8.92644 F7200.000 ; infill
 G1 X92.018 Y133.436 E8.95394 ; infill
 G1 X93.621 Y133.436 E9.03062 ; infill
 G1 X93.621 Y132.860 E9.05812 ; infill
 G1 X92.022 Y132.860 E9.13462 ; infill
 G1 X92.025 Y132.285 E9.16212 ; infill
 G1 X93.621 Y132.285 E9.23845 ; infill
 G1 X93.621 Y131.710 E9.26595 ; infill
 G1 X92.029 Y131.710 E9.34210 ; infill
 G1 X92.033 Y131.135 E9.36960 ; infill
 G1 X93.621 Y131.135 E9.44557 ; infill
 G1 X93.621 Y130.560 E9.47307 ; infill
 G1 X92.036 Y130.560 E9.54887 ; infill
 G1 X92.040 Y129.985 E9.57637 ; infill
 G1 X93.621 Y129.985 E9.65199 ; infill
 G1 X93.621 Y129.410 E9.67949 ; infill
 G1 X92.044 Y129.410 E9.75493 ; infill
 G1 X92.047 Y128.835 E9.78244 ; infill
 G1 X93.621 Y128.835 E9.85770 ; infill
 G1 X93.621 Y128.260 E9.88520 ; infill
 G1 X92.051 Y128.260 E9.96029 ; infill
 G1 X92.055 Y127.685 E9.98780 ; infill
 G1 X93.621 Y127.685 E10.06271 ; infill
 G1 X93.621 Y127.109 E10.09021 ; infill
 G1 X92.058 Y127.109 E10.16495 ; infill
 G1 X92.062 Y126.534 E10.19245 ; infill
 G1 X93.621 Y126.534 E10.26701 ; infill
 G1 X93.621 Y125.959 E10.29451 ; infill
 G1 X92.066 Y125.959 E10.36890 ; infill
 G1 X92.069 Y125.384 E10.39640 ; infill
 G1 X93.621 Y125.384 E10.47061 ; infill
 G1 X93.621 Y124.809 E10.49811 ; infill
 G1 X92.073 Y124.809 E10.57215 ; infill
 G1 X92.077 Y124.234 E10.59965 ; infill
 G1 X93.621 Y124.234 E10.67350 ; infill
 G1 X93.621 Y123.659 E10.70101 ; infill
 G1 X92.081 Y123.659 E10.77469 ; infill
 G1 X92.084 Y123.084 E10.80219 ; infill
 G1 X93.621 Y123.084 E10.87569 ; infill
 G1 X93.621 Y122.509 E10.90319 ; infill
 G1 X92.088 Y122.509 E10.97652 ; infill
 G1 X92.092 Y121.934 E11.00402 ; infill
 G1 X92.472 Y121.934 E11.02219 ; infill
 G1 X91.703 Y119.744 F12000.000 ; move to first infill point
 G1 X91.491 Y119.308 E11.03659 F1800.000 ; infill
 G1 X91.388 Y118.357 E11.06499 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E10.83778 ; wipe and retract
 G1 F9600
 G1 X91.703 Y119.744 E10.72264 ; wipe and retract
 G1 E6.06499 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.200 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z8.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X105.107 Y121.240 F12000.000 ; move to first infill point
 G1 X105.494 Y121.240 E5.07167 F7200.000 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.930 E5.13770 F1800.000 ; infill
 G1 X105.579 Y117.930 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.15587 F1800.000 ; infill
 G1 X104.413 Y110.364 E5.36505 ; infill
 G1 F9600
 G1 X105.528 Y117.321 E3.69182 ; wipe and retract
 G1 F9600
 G1 X105.579 Y117.930 E3.54649 ; wipe and retract
 G1 E0.36505 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.200 F12000.000 ; lift Z
 G1 X102.427 Y97.969 F12000.000 ; move to first infill point
 G1 Z8.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.594 Y74.053 E6.52477 F1800.000 ; infill
 G1 X98.594 Y74.053 F12000.000 ; move to first infill point
 G1 X97.962 Y70.107 E6.64341 F1800.000 ; infill
 G1 X94.601 Y68.841 F12000.000 ; move to first infill point
 G1 X92.452 Y68.841 E6.74586 F7200.000 ; infill
 G1 X92.452 Y68.267 E6.77319 ; infill
 G1 X94.601 Y68.267 E6.87564 ; infill
 G1 X94.601 Y67.694 E6.90296 ; infill
 G1 X92.452 Y67.694 E7.00542 ; infill
 G1 X92.452 Y67.121 E7.03274 ; infill
 G1 X94.601 Y67.121 E7.13519 ; infill
 G1 X94.601 Y66.548 E7.16252 ; infill
 G1 X92.452 Y66.548 E7.26497 ; infill
 G1 X92.452 Y65.974 E7.29229 ; infill
 G1 X94.601 Y65.974 E7.39475 ; infill
 G1 X94.601 Y65.401 E7.42207 ; infill
 G1 X92.454 Y65.401 E7.52443 ; infill
 G1 X92.458 Y64.828 E7.55175 ; infill
 G1 X94.601 Y64.828 E7.65393 ; infill
 G1 X94.601 Y64.255 E7.68126 ; infill
 G1 X92.461 Y64.255 E7.78326 ; infill
 G1 X92.465 Y63.681 E7.81059 ; infill
 G1 X94.601 Y63.681 E7.91242 ; infill
 G1 X94.601 Y63.108 E7.93974 ; infill
 G1 X92.469 Y63.108 E8.04139 ; infill
 G1 X92.472 Y62.535 E8.06872 ; infill
 G1 X94.601 Y62.535 E8.17020 ; infill
 G1 X94.601 Y61.962 E8.19752 ; infill
 G1 X92.476 Y61.962 E8.29883 ; infill
 G1 X92.480 Y61.388 E8.32615 ; infill
 G1 X94.601 Y61.388 E8.42728 ; infill
 M106 S237.15 ; enable fan
 G1 F9600
 G1 X92.480 Y61.388 E7.92339 ; wipe and retract
 G1 F9600
 G1 X92.476 Y61.962 E7.78724 ; wipe and retract
 G1 F9600
 G1 X94.601 Y61.962 E7.28248 ; wipe and retract
 G1 F9600
 G1 X94.601 Y62.535 E7.14634 ; wipe and retract
 G1 F9600
 G1 X92.472 Y62.535 E6.64070 ; wipe and retract
 G1 F9600
 G1 X92.469 Y63.108 E6.50456 ; wipe and retract
 G1 F9600
 G1 X94.601 Y63.108 E5.99805 ; wipe and retract
 G1 F9600
 G1 X94.601 Y63.681 E5.86190 ; wipe and retract
 G1 F9600
 G1 X92.465 Y63.681 E5.35452 ; wipe and retract
 G1 F9600
 G1 X92.461 Y64.255 E5.21838 ; wipe and retract
 G1 F9600
 G1 X94.601 Y64.255 E4.71012 ; wipe and retract
 G1 F9600
 G1 X94.601 Y64.828 E4.57398 ; wipe and retract
 G1 F9600
 G1 X92.458 Y64.828 E4.06485 ; wipe and retract
 G1 F9600
 G1 X92.454 Y65.401 E3.92870 ; wipe and retract
 G1 F9600
 G1 X93.513 Y65.401 E3.67728 ; wipe and retract
 G1 E3.42728 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.200 F12000.000 ; lift Z
 G1 X95.608 Y132.215 F12000.000 ; move to first perimeter point
 G1 Z8.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X109.346 Y132.215 E5.40791 F7200.000 ; perimeter
 G1 X109.992 Y136.074 E5.52409 ; perimeter
 G1 X109.992 Y137.923 E5.57898 ; perimeter
 G1 X109.148 Y139.531 E5.63290 ; perimeter
 G1 X107.653 Y140.562 E5.68681 ; perimeter
 G1 X105.814 Y140.785 E5.74183 ; perimeter
 G1 X93.363 Y140.785 E6.11153 ; perimeter
 G1 X91.653 Y140.137 E6.16582 ; perimeter
 G1 X90.449 Y138.778 E6.21974 ; perimeter
 G1 X90.008 Y136.991 E6.27438 ; perimeter
 G1 X90.507 Y59.215 E8.58371 ; perimeter
 G1 X96.608 Y59.215 E8.76486 ; perimeter
 G1 X96.608 Y69.215 E9.06178 ; perimeter
 G1 X98.811 Y69.215 E9.12718 ; perimeter
 G1 X107.942 Y123.815 E10.77084 ; perimeter
 G1 X95.608 Y123.815 E11.13704 ; perimeter
 G1 X95.608 Y132.155 E11.38467 ; perimeter
 G1 X95.608 Y132.615 F12000.000 ; move inwards before travel
 G1 X95.251 Y132.572 F12000.000 ; move to first perimeter point
 G1 X98.451 Y132.572 E11.47968 F7200.000 ; perimeter
 G1 X98.451 Y136.372 E11.59251 ; perimeter
 G1 X105.165 Y136.372 E11.79186 ; perimeter
 G1 X105.165 Y132.572 E11.90469 ; perimeter
 G1 X109.044 Y132.572 E12.01986 ; perimeter
 G1 X109.635 Y136.104 E12.12618 ; perimeter
 G1 X109.635 Y137.835 E12.17758 ; perimeter
 G1 X108.873 Y139.287 E12.22627 ; perimeter
 G1 X107.523 Y140.218 E12.27496 ; perimeter
 G1 X105.792 Y140.428 E12.32672 ; perimeter
 G1 X93.428 Y140.428 E12.69384 ; perimeter
 G1 X91.862 Y139.834 E12.74357 ; perimeter
 G1 X90.774 Y138.607 E12.79226 ; perimeter
 G1 X90.366 Y136.949 E12.84297 ; perimeter
 G1 X90.862 Y59.572 E15.14044 ; perimeter
 G1 X96.251 Y59.572 E15.30046 ; perimeter
 G1 X96.251 Y69.572 E15.59737 ; perimeter
 G1 X98.509 Y69.572 E15.66441 ; perimeter
 G1 X107.520 Y123.458 E17.28656 ; perimeter
 G1 X95.251 Y123.458 E17.65085 ; perimeter
 G1 X95.251 Y132.512 E17.91968 ; perimeter
 G1 X94.894 Y132.929 F12000.000 ; move to first perimeter point
 G1 X98.094 Y132.929 E18.01469 F7200.000 ; perimeter
 G1 X98.094 Y136.729 E18.12751 ; perimeter
 G1 X105.522 Y136.729 E18.34807 ; perimeter
 G1 X105.522 Y132.929 E18.46090 ; perimeter
 G1 X108.742 Y132.929 E18.55649 ; perimeter
 G1 X109.278 Y136.133 E18.65296 ; perimeter
 G1 X109.278 Y137.747 E18.70086 ; perimeter
 G1 X108.597 Y139.043 E18.74432 ; perimeter
 G1 X107.393 Y139.874 E18.78779 ; perimeter
 G1 X105.771 Y140.071 E18.83630 ; perimeter
 G1 X93.493 Y140.071 E19.20083 ; perimeter
 G1 X92.071 Y139.532 E19.24601 ; perimeter
 G1 X91.100 Y138.436 E19.28947 ; perimeter
 G1 X90.723 Y136.906 E19.33624 ; perimeter
 G1 X91.216 Y59.929 E21.62186 ; perimeter
 G1 X95.894 Y59.929 E21.76074 ; perimeter
 G1 X95.894 Y69.929 E22.05765 ; perimeter
 G1 X98.206 Y69.929 E22.12631 ; perimeter
 G1 X107.098 Y123.100 E23.72697 ; perimeter
 G1 X94.894 Y123.100 E24.08933 ; perimeter
 G1 X94.894 Y132.869 E24.37937 ; perimeter
 G1 X94.537 Y133.286 F12000.000 ; move to first perimeter point
 G1 X97.737 Y133.286 E24.47438 F7200.000 ; perimeter
 G1 X97.737 Y137.086 E24.58721 ; perimeter
 G1 X105.879 Y137.086 E24.82897 ; perimeter
 G1 X105.879 Y133.286 E24.94179 ; perimeter
 G1 X108.440 Y133.286 E25.01781 ; perimeter
 G1 X108.921 Y136.163 E25.10442 ; perimeter
 G1 X108.921 Y137.659 E25.14883 ; perimeter
 G1 X108.322 Y138.799 E25.18707 ; perimeter
 G1 X107.262 Y139.530 E25.22530 ; perimeter
 G1 X105.749 Y139.714 E25.27056 ; perimeter
 G1 X93.559 Y139.714 E25.63250 ; perimeter
 G1 X92.280 Y139.229 E25.67313 ; perimeter
 G1 X91.426 Y138.265 E25.71136 ; perimeter
 G1 X91.080 Y136.864 E25.75420 ; perimeter
 G1 X91.571 Y60.286 E28.02796 ; perimeter
 G1 X95.537 Y60.286 E28.14571 ; perimeter
 G1 X95.537 Y69.943 E28.43245 ; perimeter
 G1 X91.819 Y69.943 E28.54283 ; perimeter
 G1 X91.536 Y118.153 E29.97425 ; perimeter
 G1 X91.886 Y119.700 E30.02136 ; perimeter
 G1 X92.975 Y121.041 E30.07265 ; perimeter
 G1 X94.490 Y121.668 E30.12135 ; perimeter
 G1 X101.702 Y121.668 E30.33547 ; perimeter
 G1 X103.161 Y121.475 E30.37918 ; perimeter
 G1 X104.541 Y120.436 E30.43047 ; perimeter
 G1 X105.290 Y118.879 E30.48177 ; perimeter
 G1 X105.290 Y117.343 E30.52737 ; perimeter
 G1 X102.350 Y98.162 E31.10353 ; perimeter
 G1 X102.560 Y98.128 E31.10985 ; perimeter
 G1 X106.677 Y122.743 E31.85085 ; perimeter
 G1 X94.537 Y122.743 E32.21129 ; perimeter
 G1 X94.537 Y133.226 E32.52253 ; perimeter
 G1 F9600
 G1 X97.737 Y133.286 E31.76239 ; wipe and retract
 G1 F9600
 G1 X97.737 Y137.086 E30.85989 ; wipe and retract
 G1 F9600
 G1 X105.879 Y137.086 E28.92606 ; wipe and retract
 G1 F9600
 G1 X105.879 Y133.286 E28.02356 ; wipe and retract
 G1 F9600
 G1 X106.936 Y133.286 E27.77253 ; wipe and retract
 G1 E27.52253 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.400 F12000.000 ; lift Z
 G1 X95.180 Y69.586 F12000.000 ; move to first perimeter point
 G1 Z8.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.869 Y69.586 E5.09831 F7200.000 ; perimeter
 G1 X91.926 Y60.643 E5.36386 ; perimeter
 G1 X95.180 Y60.643 E5.46047 ; perimeter
 G1 X95.180 Y69.526 E5.72422 ; perimeter
 G1 X94.823 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.228 Y69.229 E5.80126 F7200.000 ; perimeter
 G1 X92.281 Y61.000 E6.04560 ; perimeter
 G1 X94.823 Y61.000 E6.12108 ; perimeter
 G1 X94.823 Y69.169 E6.36363 ; perimeter
 G1 F9600
 G1 X92.228 Y69.229 E5.74724 ; wipe and retract
 G1 F9600
 G1 X92.281 Y61.000 E3.79276 ; wipe and retract
 G1 F9600
 G1 X94.823 Y61.000 E3.18906 ; wipe and retract
 G1 F9600
 G1 X94.823 Y67.633 E1.61363 ; wipe and retract
 G1 E1.36363 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.400 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z8.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X106.236 Y137.443 E5.80503 ; perimeter
 G1 X106.236 Y133.643 E5.91785 ; perimeter
 G1 X108.137 Y133.643 E5.97429 ; perimeter
 G1 X108.564 Y136.193 E6.05104 ; perimeter
 G1 X108.564 Y137.571 E6.09196 ; perimeter
 G1 X108.047 Y138.555 E6.12497 ; perimeter
 G1 X107.132 Y139.187 E6.15798 ; perimeter
 G1 X105.728 Y139.357 E6.19998 ; perimeter
 G1 X93.624 Y139.357 E6.55934 ; perimeter
 G1 X92.488 Y138.926 E6.59541 ; perimeter
 G1 X91.751 Y138.094 E6.62842 ; perimeter
 G1 X91.438 Y136.822 E6.66732 ; perimeter
 G1 X91.546 Y119.849 E7.17128 ; perimeter
 G1 X92.754 Y121.337 E7.22818 ; perimeter
 G1 X94.419 Y122.025 E7.28168 ; perimeter
 G1 X101.725 Y122.025 E7.49860 ; perimeter
 G1 X103.301 Y121.817 E7.54579 ; perimeter
 G1 X104.825 Y120.669 E7.60245 ; perimeter
 G1 X105.561 Y119.141 E7.65279 ; perimeter
 G1 X105.716 Y119.163 E7.65745 ; perimeter
 G1 X106.255 Y122.386 E7.75447 ; perimeter
 G1 X94.240 Y122.386 E8.11121 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E8.11579 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E8.16422 ; perimeter
 G1 X105.394 Y120.311 E8.18370 ; perimeter
 G1 X105.549 Y120.333 E8.18835 ; perimeter
 G1 X105.833 Y122.029 E8.23942 ; perimeter
 G1 X103.916 Y122.029 E8.29635 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E8.25304 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.86568 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E7.70986 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E7.67261 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E7.26411 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.80871 ; wipe and retract
 G1 E3.29635 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.400 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z8.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X106.593 Y137.800 E5.49201 ; perimeter
 G1 X106.593 Y134.000 E5.60483 ; perimeter
 G1 X107.835 Y134.000 E5.64169 ; perimeter
 G1 X108.207 Y136.222 E5.70859 ; perimeter
 G1 X108.207 Y137.482 E5.74601 ; perimeter
 G1 X107.772 Y138.311 E5.77380 ; perimeter
 G1 X107.001 Y138.843 E5.80158 ; perimeter
 G1 X105.706 Y139.000 E5.84033 ; perimeter
 G1 X93.690 Y139.000 E6.19710 ; perimeter
 G1 X92.697 Y138.624 E6.22862 ; perimeter
 G1 X92.077 Y137.923 E6.25640 ; perimeter
 G1 X91.795 Y136.780 E6.29137 ; perimeter
 G1 X91.897 Y120.847 E6.76443 ; perimeter
 G1 X92.534 Y121.632 E6.79444 ; perimeter
 G1 X93.823 Y122.165 E6.83584 ; perimeter
 G1 X93.823 Y133.940 E7.18545 ; perimeter
 G1 F9600
 G1 X97.023 Y134.000 E6.42532 ; wipe and retract
 G1 F9600
 G1 X97.023 Y137.800 E5.52282 ; wipe and retract
 G1 F9600
 G1 X106.593 Y137.800 E3.24976 ; wipe and retract
 G1 F9600
 G1 X106.593 Y134.371 E2.43545 ; wipe and retract
 G1 E2.18545 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.400 F12000.000 ; lift Z
 G1 X92.884 Y71.015 F12000.000 ; move to first perimeter point
 G1 Z8.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.105 Y71.015 E5.12531 F7200.000 ; perimeter
 G1 X104.219 Y117.425 E6.51939 ; perimeter
 G1 X104.219 Y118.635 E6.55531 ; perimeter
 G1 X103.689 Y119.737 E6.59162 ; perimeter
 G1 X102.742 Y120.450 E6.62683 ; perimeter
 G1 X101.631 Y120.597 E6.66009 ; perimeter
 G1 X94.703 Y120.597 E6.86579 ; perimeter
 G1 X93.635 Y120.155 E6.90011 ; perimeter
 G1 X92.875 Y119.220 E6.93589 ; perimeter
 G1 X92.608 Y118.036 E6.97191 ; perimeter
 G1 X92.884 Y71.075 E8.36629 ; perimeter
 G1 X92.885 Y70.615 F12000.000 ; move inwards before travel
 G1 X92.529 Y70.658 F12000.000 ; move to first perimeter point
 G1 X97.411 Y70.658 E8.51124 F7200.000 ; perimeter
 G1 X104.576 Y117.398 E9.91523 ; perimeter
 G1 X104.576 Y118.716 E9.95438 ; perimeter
 G1 X103.973 Y119.970 E9.99568 ; perimeter
 G1 X102.881 Y120.792 E10.03626 ; perimeter
 G1 X101.655 Y120.954 E10.07300 ; perimeter
 G1 X94.632 Y120.954 E10.28150 ; perimeter
 G1 X93.415 Y120.451 E10.32062 ; perimeter
 G1 X92.545 Y119.380 E10.36157 ; perimeter
 G1 X92.251 Y118.075 E10.40129 ; perimeter
 G1 X92.529 Y70.718 E11.80742 ; perimeter
 G1 X92.174 Y70.300 F12000.000 ; move to first perimeter point
 G1 X97.718 Y70.300 E11.97201 F7200.000 ; perimeter
 G1 X104.933 Y117.371 E13.38591 ; perimeter
 G1 X104.933 Y118.797 E13.42828 ; perimeter
 G1 X104.257 Y120.203 E13.47458 ; perimeter
 G1 X103.021 Y121.133 E13.52051 ; perimeter
 G1 X101.678 Y121.311 E13.56074 ; perimeter
 G1 X94.561 Y121.311 E13.77205 ; perimeter
 G1 X93.195 Y120.746 E13.81596 ; perimeter
 G1 X92.216 Y119.540 E13.86208 ; perimeter
 G1 X91.893 Y118.114 E13.90549 ; perimeter
 G1 X92.174 Y70.360 E15.32338 ; perimeter
 G1 F9600
 G1 X97.718 Y70.300 E14.00664 ; wipe and retract
 G1 F9600
 G1 X99.908 Y84.589 E10.57338 ; wipe and retract
 G1 E10.32338 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.400 F12000.000 ; lift Z
 G1 X98.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z8.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X104.808 Y133.015 E5.17815 F7200.000 ; perimeter
 G1 X104.808 Y136.015 E5.26722 ; perimeter
 G1 X98.808 Y136.015 E5.44537 ; perimeter
 G1 X98.808 Y133.075 E5.53266 ; perimeter
 G1 X98.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X104.987 Y132.615 E5.93285 F1800.000 ; infill
 G1 X107.260 Y134.201 F12000.000 ; move to first infill point
 G1 X107.260 Y138.384 E6.12703 F7200.000 ; infill
 G1 X106.701 Y138.675 E6.15627 ; infill
 G1 X106.701 Y138.001 E6.18755 ; infill
 G1 X106.143 Y138.001 E6.21347 ; infill
 G1 X106.143 Y138.743 E6.24790 ; infill
 G1 X105.585 Y138.779 E6.27388 ; infill
 G1 X105.585 Y138.001 E6.30996 ; infill
 G1 X105.026 Y138.001 E6.33589 ; infill
 G1 X105.026 Y138.779 E6.37197 ; infill
 G1 X104.468 Y138.779 E6.39790 ; infill
 G1 X104.468 Y138.001 E6.43398 ; infill
 G1 X103.909 Y138.001 E6.45991 ; infill
 G1 X103.909 Y138.779 E6.49599 ; infill
 G1 X103.351 Y138.779 E6.52192 ; infill
 G1 X103.351 Y138.001 E6.55800 ; infill
 G1 X102.793 Y138.001 E6.58393 ; infill
 G1 X102.793 Y138.779 E6.62001 ; infill
 G1 X102.234 Y138.779 E6.64594 ; infill
 G1 X102.234 Y138.001 E6.68202 ; infill
 G1 X101.676 Y138.001 E6.70795 ; infill
 G1 X101.676 Y138.779 E6.74403 ; infill
 G1 X101.118 Y138.779 E6.76996 ; infill
 G1 X101.118 Y138.001 E6.80604 ; infill
 G1 X100.559 Y138.001 E6.83197 ; infill
 G1 X100.559 Y138.779 E6.86805 ; infill
 G1 X100.001 Y138.779 E6.89398 ; infill
 G1 X100.001 Y138.001 E6.93006 ; infill
 G1 X99.443 Y138.001 E6.95599 ; infill
 G1 X99.443 Y138.779 E6.99208 ; infill
 G1 X98.884 Y138.779 E7.01800 ; infill
 G1 X98.884 Y138.001 E7.05409 ; infill
 G1 X98.326 Y138.001 E7.08001 ; infill
 G1 X98.326 Y138.779 E7.11610 ; infill
 G1 X97.767 Y138.779 E7.14202 ; infill
 G1 X97.767 Y138.001 E7.17810 ; infill
 G1 X97.209 Y138.001 E7.20403 ; infill
 G1 X97.209 Y138.779 E7.24011 ; infill
 G1 X96.651 Y138.779 E7.26604 ; infill
 G1 X96.651 Y134.201 E7.47855 ; infill
 G1 X96.092 Y134.201 E7.50448 ; infill
 G1 X96.092 Y138.779 E7.71699 ; infill
 G1 X95.534 Y138.779 E7.74291 ; infill
 G1 X95.534 Y134.201 E7.95542 ; infill
 G1 X94.976 Y134.201 E7.98135 ; infill
 G1 X94.976 Y138.779 E8.19386 ; infill
 G1 X94.417 Y138.779 E8.21978 ; infill
 G1 X94.417 Y134.201 E8.43230 ; infill
 G1 X93.859 Y134.201 E8.45822 ; infill
 G1 X93.859 Y138.779 E8.67073 ; infill
 G1 X93.301 Y138.625 E8.69762 ; infill
 G1 X93.301 Y122.181 E9.46111 ; infill
 G1 X92.742 Y121.950 E9.48917 ; infill
 G1 X92.742 Y138.286 E10.24761 ; infill
 G1 X92.184 Y136.984 F12000.000 ; move to first infill point
 G1 X92.184 Y133.450 E10.41173 F7200.000 ; infill
 G1 F9600
 G1 X92.184 Y136.984 E9.57222 ; wipe and retract
 G1 E5.41173 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.400 F12000.000 ; lift Z
 G1 X107.818 Y135.966 F12000.000 ; move to first infill point
 G1 Z8.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X107.818 Y137.597 E5.07572 F7200.000 ; infill
 G1 F9600
 G1 X107.818 Y135.966 E4.68840 ; wipe and retract
 G1 E0.07572 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.400 F12000.000 ; lift Z
 G1 X91.703 Y119.744 F12000.000 ; move to first infill point
 G1 Z8.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.491 Y119.308 E5.01440 F1800.000 ; infill
 G1 X91.388 Y118.357 E5.04280 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E4.81559 ; wipe and retract
 G1 F9600
 G1 X91.703 Y119.744 E4.70044 ; wipe and retract
 G1 E0.04280 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.400 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z8.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X104.774 Y121.808 F12000.000 ; move to first infill point
 G1 X104.774 Y121.449 E5.07163 F7200.000 ; infill
 G1 X105.374 Y121.352 E5.10194 ; infill
 G1 X105.374 Y121.808 E5.12466 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.930 E5.19070 F1800.000 ; infill
 G1 X105.579 Y117.930 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.20887 F1800.000 ; infill
 G1 X104.413 Y110.364 E5.41805 ; infill
 G1 X102.427 Y97.969 F12000.000 ; move to first infill point
 G1 X98.594 Y74.053 E6.94281 F1800.000 ; infill
 G1 X98.594 Y74.053 F12000.000 ; move to first infill point
 G1 X97.962 Y70.107 E7.06146 F1800.000 ; infill
 G1 X94.434 Y69.008 F12000.000 ; move to first infill point
 G1 X94.434 Y61.221 E7.45319 F7200.000 ; infill
 G1 X93.829 Y61.221 E7.48363 ; infill
 G1 X93.829 Y69.008 E7.87537 ; infill
 G1 X93.224 Y69.008 E7.90581 ; infill
 G1 X93.224 Y61.221 E8.29755 ; infill
 G1 X92.619 Y65.552 F12000.000 ; move to first infill point
 G1 X92.619 Y69.008 E8.47140 F7200.000 ; infill
 M106 S234.6 ; enable fan
 G1 F9600
 G1 X92.619 Y65.552 E7.65069 ; wipe and retract
 G1 E3.47140 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.400 F12000.000 ; lift Z
 G1 X95.608 Y132.215 F12000.000 ; move to first perimeter point
 G1 Z8.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X109.346 Y132.215 E5.40791 F7200.000 ; perimeter
 G1 X109.992 Y136.074 E5.52409 ; perimeter
 G1 X109.992 Y137.923 E5.57898 ; perimeter
 G1 X109.148 Y139.531 E5.63290 ; perimeter
 G1 X107.653 Y140.562 E5.68681 ; perimeter
 G1 X105.814 Y140.785 E5.74183 ; perimeter
 G1 X93.363 Y140.785 E6.11153 ; perimeter
 G1 X91.653 Y140.137 E6.16582 ; perimeter
 G1 X90.449 Y138.778 E6.21974 ; perimeter
 G1 X90.008 Y136.991 E6.27438 ; perimeter
 G1 X90.507 Y59.215 E8.58371 ; perimeter
 G1 X96.608 Y59.215 E8.76486 ; perimeter
 G1 X96.608 Y69.215 E9.06178 ; perimeter
 G1 X98.811 Y69.215 E9.12718 ; perimeter
 G1 X107.942 Y123.815 E10.77084 ; perimeter
 G1 X95.608 Y123.815 E11.13704 ; perimeter
 G1 X95.608 Y132.155 E11.38467 ; perimeter
 G1 X95.608 Y132.615 F12000.000 ; move inwards before travel
 G1 X95.251 Y132.572 F12000.000 ; move to first perimeter point
 G1 X98.451 Y132.572 E11.47968 F7200.000 ; perimeter
 G1 X98.451 Y136.372 E11.59251 ; perimeter
 G1 X105.165 Y136.372 E11.79186 ; perimeter
 G1 X105.165 Y132.572 E11.90469 ; perimeter
 G1 X109.044 Y132.572 E12.01986 ; perimeter
 G1 X109.635 Y136.104 E12.12618 ; perimeter
 G1 X109.635 Y137.835 E12.17758 ; perimeter
 G1 X108.873 Y139.287 E12.22627 ; perimeter
 G1 X107.523 Y140.218 E12.27496 ; perimeter
 G1 X105.792 Y140.428 E12.32672 ; perimeter
 G1 X93.428 Y140.428 E12.69384 ; perimeter
 G1 X91.862 Y139.834 E12.74357 ; perimeter
 G1 X90.774 Y138.607 E12.79226 ; perimeter
 G1 X90.366 Y136.949 E12.84297 ; perimeter
 G1 X90.862 Y59.572 E15.14044 ; perimeter
 G1 X96.251 Y59.572 E15.30046 ; perimeter
 G1 X96.251 Y69.572 E15.59737 ; perimeter
 G1 X98.509 Y69.572 E15.66441 ; perimeter
 G1 X107.520 Y123.458 E17.28656 ; perimeter
 G1 X95.251 Y123.458 E17.65085 ; perimeter
 G1 X95.251 Y132.512 E17.91968 ; perimeter
 G1 X94.894 Y132.929 F12000.000 ; move to first perimeter point
 G1 X98.094 Y132.929 E18.01469 F7200.000 ; perimeter
 G1 X98.094 Y136.729 E18.12751 ; perimeter
 G1 X105.522 Y136.729 E18.34807 ; perimeter
 G1 X105.522 Y132.929 E18.46090 ; perimeter
 G1 X108.742 Y132.929 E18.55649 ; perimeter
 G1 X109.278 Y136.133 E18.65296 ; perimeter
 G1 X109.278 Y137.747 E18.70086 ; perimeter
 G1 X108.597 Y139.043 E18.74432 ; perimeter
 G1 X107.393 Y139.874 E18.78779 ; perimeter
 G1 X105.771 Y140.071 E18.83630 ; perimeter
 G1 X93.493 Y140.071 E19.20083 ; perimeter
 G1 X92.071 Y139.532 E19.24601 ; perimeter
 G1 X91.100 Y138.436 E19.28947 ; perimeter
 G1 X90.723 Y136.906 E19.33624 ; perimeter
 G1 X91.216 Y59.929 E21.62186 ; perimeter
 G1 X95.894 Y59.929 E21.76074 ; perimeter
 G1 X95.894 Y69.929 E22.05765 ; perimeter
 G1 X98.206 Y69.929 E22.12631 ; perimeter
 G1 X107.098 Y123.100 E23.72697 ; perimeter
 G1 X94.894 Y123.100 E24.08933 ; perimeter
 G1 X94.894 Y132.869 E24.37937 ; perimeter
 G1 X94.537 Y133.286 F12000.000 ; move to first perimeter point
 G1 X97.737 Y133.286 E24.47438 F7200.000 ; perimeter
 G1 X97.737 Y137.086 E24.58721 ; perimeter
 G1 X105.879 Y137.086 E24.82897 ; perimeter
 G1 X105.879 Y133.286 E24.94179 ; perimeter
 G1 X108.440 Y133.286 E25.01781 ; perimeter
 G1 X108.921 Y136.163 E25.10442 ; perimeter
 G1 X108.921 Y137.659 E25.14883 ; perimeter
 G1 X108.322 Y138.799 E25.18707 ; perimeter
 G1 X107.262 Y139.530 E25.22530 ; perimeter
 G1 X105.749 Y139.714 E25.27056 ; perimeter
 G1 X93.559 Y139.714 E25.63250 ; perimeter
 G1 X92.280 Y139.229 E25.67313 ; perimeter
 G1 X91.426 Y138.265 E25.71136 ; perimeter
 G1 X91.080 Y136.864 E25.75420 ; perimeter
 G1 X91.571 Y60.286 E28.02796 ; perimeter
 G1 X95.537 Y60.286 E28.14570 ; perimeter
 G1 X95.537 Y69.943 E28.43245 ; perimeter
 G1 X91.819 Y69.943 E28.54283 ; perimeter
 G1 X91.536 Y118.153 E29.97425 ; perimeter
 G1 X91.886 Y119.700 E30.02136 ; perimeter
 G1 X92.975 Y121.041 E30.07265 ; perimeter
 G1 X94.490 Y121.668 E30.12135 ; perimeter
 G1 X101.702 Y121.668 E30.33547 ; perimeter
 G1 X103.161 Y121.475 E30.37918 ; perimeter
 G1 X104.541 Y120.436 E30.43047 ; perimeter
 G1 X105.290 Y118.879 E30.48177 ; perimeter
 G1 X105.290 Y117.343 E30.52737 ; perimeter
 G1 X102.350 Y98.162 E31.10353 ; perimeter
 G1 X102.560 Y98.128 E31.10985 ; perimeter
 G1 X106.677 Y122.743 E31.85085 ; perimeter
 G1 X94.537 Y122.743 E32.21129 ; perimeter
 G1 X94.537 Y133.226 E32.52253 ; perimeter
 G1 F9600
 G1 X97.737 Y133.286 E31.76239 ; wipe and retract
 G1 F9600
 G1 X97.737 Y137.086 E30.85989 ; wipe and retract
 G1 F9600
 G1 X105.879 Y137.086 E28.92606 ; wipe and retract
 G1 F9600
 G1 X105.879 Y133.286 E28.02356 ; wipe and retract
 G1 F9600
 G1 X106.936 Y133.286 E27.77253 ; wipe and retract
 G1 E27.52253 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.600 F12000.000 ; lift Z
 G1 X95.180 Y69.586 F12000.000 ; move to first perimeter point
 G1 Z8.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.869 Y69.586 E5.09831 F7200.000 ; perimeter
 G1 X91.926 Y60.643 E5.36386 ; perimeter
 G1 X95.180 Y60.643 E5.46047 ; perimeter
 G1 X95.180 Y69.526 E5.72422 ; perimeter
 G1 X94.823 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.228 Y69.229 E5.80126 F7200.000 ; perimeter
 G1 X92.281 Y61.000 E6.04560 ; perimeter
 G1 X94.823 Y61.000 E6.12108 ; perimeter
 G1 X94.823 Y69.169 E6.36363 ; perimeter
 G1 F9600
 G1 X92.228 Y69.229 E5.74724 ; wipe and retract
 G1 F9600
 G1 X92.281 Y61.000 E3.79276 ; wipe and retract
 G1 F9600
 G1 X94.823 Y61.000 E3.18906 ; wipe and retract
 G1 F9600
 G1 X94.823 Y67.633 E1.61363 ; wipe and retract
 G1 E1.36363 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.600 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z8.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X106.236 Y137.443 E5.80503 ; perimeter
 G1 X106.236 Y133.643 E5.91785 ; perimeter
 G1 X108.137 Y133.643 E5.97429 ; perimeter
 G1 X108.564 Y136.193 E6.05104 ; perimeter
 G1 X108.564 Y137.571 E6.09196 ; perimeter
 G1 X108.047 Y138.555 E6.12497 ; perimeter
 G1 X107.132 Y139.187 E6.15798 ; perimeter
 G1 X105.728 Y139.357 E6.19998 ; perimeter
 G1 X93.624 Y139.357 E6.55934 ; perimeter
 G1 X92.488 Y138.926 E6.59541 ; perimeter
 G1 X91.751 Y138.094 E6.62842 ; perimeter
 G1 X91.438 Y136.822 E6.66732 ; perimeter
 G1 X91.546 Y119.849 E7.17128 ; perimeter
 G1 X92.754 Y121.337 E7.22818 ; perimeter
 G1 X94.419 Y122.025 E7.28168 ; perimeter
 G1 X101.725 Y122.025 E7.49860 ; perimeter
 G1 X103.301 Y121.817 E7.54579 ; perimeter
 G1 X104.825 Y120.669 E7.60245 ; perimeter
 G1 X105.561 Y119.141 E7.65279 ; perimeter
 G1 X105.716 Y119.163 E7.65745 ; perimeter
 G1 X106.255 Y122.386 E7.75447 ; perimeter
 G1 X94.240 Y122.386 E8.11121 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E8.11579 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E8.16422 ; perimeter
 G1 X105.394 Y120.311 E8.18370 ; perimeter
 G1 X105.549 Y120.333 E8.18835 ; perimeter
 G1 X105.833 Y122.029 E8.23942 ; perimeter
 G1 X103.916 Y122.029 E8.29635 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E8.25304 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.86568 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E7.70986 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E7.67261 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E7.26411 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.80871 ; wipe and retract
 G1 E3.29635 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.600 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z8.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X106.593 Y137.800 E5.49201 ; perimeter
 G1 X106.593 Y134.000 E5.60483 ; perimeter
 G1 X107.835 Y134.000 E5.64169 ; perimeter
 G1 X108.207 Y136.222 E5.70859 ; perimeter
 G1 X108.207 Y137.482 E5.74601 ; perimeter
 G1 X107.772 Y138.311 E5.77380 ; perimeter
 G1 X107.001 Y138.843 E5.80158 ; perimeter
 G1 X105.706 Y139.000 E5.84033 ; perimeter
 G1 X93.690 Y139.000 E6.19710 ; perimeter
 G1 X92.697 Y138.624 E6.22862 ; perimeter
 G1 X92.077 Y137.923 E6.25640 ; perimeter
 G1 X91.795 Y136.780 E6.29137 ; perimeter
 G1 X91.897 Y120.847 E6.76443 ; perimeter
 G1 X92.534 Y121.632 E6.79444 ; perimeter
 G1 X93.823 Y122.165 E6.83584 ; perimeter
 G1 X93.823 Y133.940 E7.18545 ; perimeter
 G1 F9600
 G1 X97.023 Y134.000 E6.42532 ; wipe and retract
 G1 F9600
 G1 X97.023 Y137.800 E5.52282 ; wipe and retract
 G1 F9600
 G1 X106.593 Y137.800 E3.24976 ; wipe and retract
 G1 F9600
 G1 X106.593 Y134.371 E2.43545 ; wipe and retract
 G1 E2.18545 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.600 F12000.000 ; lift Z
 G1 X92.884 Y71.015 F12000.000 ; move to first perimeter point
 G1 Z8.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.105 Y71.015 E5.12531 F7200.000 ; perimeter
 G1 X104.219 Y117.425 E6.51939 ; perimeter
 G1 X104.219 Y118.635 E6.55531 ; perimeter
 G1 X103.689 Y119.737 E6.59162 ; perimeter
 G1 X102.742 Y120.450 E6.62683 ; perimeter
 G1 X101.631 Y120.597 E6.66009 ; perimeter
 G1 X94.703 Y120.597 E6.86579 ; perimeter
 G1 X93.635 Y120.155 E6.90011 ; perimeter
 G1 X92.875 Y119.220 E6.93589 ; perimeter
 G1 X92.608 Y118.036 E6.97191 ; perimeter
 G1 X92.884 Y71.075 E8.36629 ; perimeter
 G1 X92.885 Y70.615 F12000.000 ; move inwards before travel
 G1 X92.529 Y70.658 F12000.000 ; move to first perimeter point
 G1 X97.411 Y70.658 E8.51124 F7200.000 ; perimeter
 G1 X104.576 Y117.398 E9.91523 ; perimeter
 G1 X104.576 Y118.716 E9.95438 ; perimeter
 G1 X103.973 Y119.970 E9.99568 ; perimeter
 G1 X102.881 Y120.792 E10.03626 ; perimeter
 G1 X101.655 Y120.954 E10.07300 ; perimeter
 G1 X94.632 Y120.954 E10.28150 ; perimeter
 G1 X93.415 Y120.451 E10.32062 ; perimeter
 G1 X92.545 Y119.380 E10.36157 ; perimeter
 G1 X92.251 Y118.075 E10.40129 ; perimeter
 G1 X92.529 Y70.718 E11.80742 ; perimeter
 G1 X92.174 Y70.300 F12000.000 ; move to first perimeter point
 G1 X97.718 Y70.300 E11.97201 F7200.000 ; perimeter
 G1 X104.933 Y117.371 E13.38591 ; perimeter
 G1 X104.933 Y118.797 E13.42828 ; perimeter
 G1 X104.257 Y120.203 E13.47458 ; perimeter
 G1 X103.021 Y121.133 E13.52051 ; perimeter
 G1 X101.678 Y121.311 E13.56074 ; perimeter
 G1 X94.561 Y121.311 E13.77205 ; perimeter
 G1 X93.195 Y120.746 E13.81596 ; perimeter
 G1 X92.216 Y119.540 E13.86208 ; perimeter
 G1 X91.893 Y118.114 E13.90549 ; perimeter
 G1 X92.174 Y70.360 E15.32338 ; perimeter
 G1 F9600
 G1 X97.718 Y70.300 E14.00664 ; wipe and retract
 G1 F9600
 G1 X99.908 Y84.589 E10.57338 ; wipe and retract
 G1 E10.32338 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.600 F12000.000 ; lift Z
 G1 X98.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z8.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X104.808 Y133.015 E5.17815 F7200.000 ; perimeter
 G1 X104.808 Y136.015 E5.26722 ; perimeter
 G1 X98.808 Y136.015 E5.44537 ; perimeter
 G1 X98.808 Y133.075 E5.53266 ; perimeter
 G1 X98.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X104.987 Y132.615 E5.93285 F1800.000 ; infill
 G1 X107.726 Y134.586 F12000.000 ; move to first infill point
 G1 X106.795 Y134.586 E5.97739 F7200.000 ; infill
 G1 X106.795 Y135.161 E6.00489 ; infill
 G1 X107.823 Y135.161 E6.05403 ; infill
 G1 X107.919 Y135.736 E6.08192 ; infill
 G1 X106.795 Y135.736 E6.13566 ; infill
 G1 X106.795 Y136.311 E6.16316 ; infill
 G1 X107.985 Y136.311 E6.22008 ; infill
 G1 X107.985 Y136.886 E6.24758 ; infill
 G1 X106.795 Y136.886 E6.30450 ; infill
 G1 X106.795 Y137.461 E6.33200 ; infill
 G1 X107.969 Y137.461 E6.38812 ; infill
 G1 X107.667 Y138.036 E6.41918 ; infill
 G1 X106.795 Y138.036 E6.46087 ; infill
 G1 X106.015 Y138.612 E6.50720 ; infill
 G1 X93.538 Y138.612 E7.10389 ; infill
 G1 X96.821 Y138.036 F12000.000 ; move to first infill point
 G1 X92.502 Y138.036 E7.31042 F7200.000 ; infill
 G1 X92.175 Y137.461 E7.34205 ; infill
 G1 X96.821 Y137.461 E7.56422 ; infill
 G1 X96.821 Y136.886 E7.59172 ; infill
 G1 X92.034 Y136.886 E7.82067 ; infill
 G1 X92.017 Y136.311 E7.84818 ; infill
 G1 X96.821 Y136.311 E8.07794 ; infill
 G1 X96.821 Y135.736 E8.10544 ; infill
 G1 X92.017 Y135.736 E8.33519 ; infill
 G1 X92.017 Y135.161 E8.36269 ; infill
 G1 X96.821 Y135.161 E8.59245 ; infill
 G1 X96.821 Y134.586 E8.61995 ; infill
 G1 X92.017 Y134.586 E8.84971 ; infill
 G1 X93.621 Y134.011 F12000.000 ; move to first infill point
 G1 X92.017 Y134.011 E8.92644 F7200.000 ; infill
 G1 X92.018 Y133.436 E8.95394 ; infill
 G1 X93.621 Y133.436 E9.03062 ; infill
 G1 X93.621 Y132.860 E9.05812 ; infill
 G1 X92.022 Y132.860 E9.13462 ; infill
 G1 X92.025 Y132.285 E9.16212 ; infill
 G1 X93.621 Y132.285 E9.23845 ; infill
 G1 X93.621 Y131.710 E9.26595 ; infill
 G1 X92.029 Y131.710 E9.34210 ; infill
 G1 X92.033 Y131.135 E9.36960 ; infill
 G1 X93.621 Y131.135 E9.44557 ; infill
 G1 X93.621 Y130.560 E9.47307 ; infill
 G1 X92.036 Y130.560 E9.54887 ; infill
 G1 X92.040 Y129.985 E9.57637 ; infill
 G1 X93.621 Y129.985 E9.65199 ; infill
 G1 X93.621 Y129.410 E9.67949 ; infill
 G1 X92.044 Y129.410 E9.75493 ; infill
 G1 X92.047 Y128.835 E9.78244 ; infill
 G1 X93.621 Y128.835 E9.85770 ; infill
 G1 X93.621 Y128.260 E9.88520 ; infill
 G1 X92.051 Y128.260 E9.96029 ; infill
 G1 X92.055 Y127.685 E9.98780 ; infill
 G1 X93.621 Y127.685 E10.06271 ; infill
 G1 X93.621 Y127.109 E10.09021 ; infill
 G1 X92.058 Y127.109 E10.16495 ; infill
 G1 X92.062 Y126.534 E10.19245 ; infill
 G1 X93.621 Y126.534 E10.26701 ; infill
 G1 X93.621 Y125.959 E10.29451 ; infill
 G1 X92.066 Y125.959 E10.36890 ; infill
 G1 X92.069 Y125.384 E10.39640 ; infill
 G1 X93.621 Y125.384 E10.47061 ; infill
 G1 X93.621 Y124.809 E10.49811 ; infill
 G1 X92.073 Y124.809 E10.57214 ; infill
 G1 X92.077 Y124.234 E10.59965 ; infill
 G1 X93.621 Y124.234 E10.67350 ; infill
 G1 X93.621 Y123.659 E10.70100 ; infill
 G1 X92.081 Y123.659 E10.77469 ; infill
 G1 X92.084 Y123.084 E10.80219 ; infill
 G1 X93.621 Y123.084 E10.87569 ; infill
 G1 X93.621 Y122.509 E10.90319 ; infill
 G1 X92.088 Y122.509 E10.97652 ; infill
 G1 X92.092 Y121.934 E11.00402 ; infill
 G1 X92.472 Y121.934 E11.02219 ; infill
 G1 X91.703 Y119.744 F12000.000 ; move to first infill point
 G1 X91.491 Y119.308 E11.03659 F1800.000 ; infill
 G1 X91.388 Y118.357 E11.06499 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E10.83779 ; wipe and retract
 G1 F9600
 G1 X91.703 Y119.744 E10.72264 ; wipe and retract
 G1 E6.06499 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.600 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z8.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X105.107 Y121.240 F12000.000 ; move to first infill point
 G1 X105.494 Y121.240 E5.07167 F7200.000 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.930 E5.13770 F1800.000 ; infill
 G1 X105.579 Y117.930 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.15587 F1800.000 ; infill
 G1 X104.413 Y110.364 E5.36505 ; infill
 G1 X102.427 Y97.969 F12000.000 ; move to first infill point
 G1 X98.594 Y74.053 E6.88982 F1800.000 ; infill
 G1 X98.594 Y74.053 F12000.000 ; move to first infill point
 G1 X97.962 Y70.107 E7.00846 F1800.000 ; infill
 G1 X94.601 Y68.841 F12000.000 ; move to first infill point
 G1 X92.452 Y68.841 E7.11092 F7200.000 ; infill
 G1 X92.452 Y68.267 E7.13824 ; infill
 G1 X94.601 Y68.267 E7.24069 ; infill
 G1 X94.601 Y67.694 E7.26802 ; infill
 G1 X92.452 Y67.694 E7.37047 ; infill
 G1 X92.452 Y67.121 E7.39780 ; infill
 G1 X94.601 Y67.121 E7.50025 ; infill
 G1 X94.601 Y66.548 E7.52757 ; infill
 G1 X92.452 Y66.548 E7.63002 ; infill
 G1 X92.452 Y65.974 E7.65735 ; infill
 G1 X94.601 Y65.974 E7.75980 ; infill
 G1 X94.601 Y65.401 E7.78713 ; infill
 G1 X92.454 Y65.401 E7.88948 ; infill
 G1 X92.458 Y64.828 E7.91681 ; infill
 G1 X94.601 Y64.828 E8.01899 ; infill
 G1 X94.601 Y64.255 E8.04631 ; infill
 G1 X92.461 Y64.255 E8.14831 ; infill
 G1 X92.465 Y63.681 E8.17564 ; infill
 G1 X94.601 Y63.681 E8.27747 ; infill
 G1 X94.601 Y63.108 E8.30479 ; infill
 G1 X92.469 Y63.108 E8.40645 ; infill
 G1 X92.472 Y62.535 E8.43377 ; infill
 G1 X94.601 Y62.535 E8.53525 ; infill
 G1 X94.601 Y61.962 E8.56258 ; infill
 G1 X92.476 Y61.962 E8.66388 ; infill
 G1 X92.480 Y61.388 E8.69121 ; infill
 G1 X94.601 Y61.388 E8.79234 ; infill
 G1 F9600
 G1 X92.480 Y61.388 E8.28845 ; wipe and retract
 G1 F9600
 G1 X92.476 Y61.962 E8.15230 ; wipe and retract
 G1 F9600
 G1 X94.601 Y61.962 E7.64754 ; wipe and retract
 G1 F9600
 G1 X94.601 Y62.535 E7.51139 ; wipe and retract
 G1 F9600
 G1 X92.472 Y62.535 E7.00576 ; wipe and retract
 G1 F9600
 G1 X92.469 Y63.108 E6.86961 ; wipe and retract
 G1 F9600
 G1 X94.601 Y63.108 E6.36310 ; wipe and retract
 G1 F9600
 G1 X94.601 Y63.681 E6.22696 ; wipe and retract
 G1 F9600
 G1 X92.465 Y63.681 E5.71958 ; wipe and retract
 G1 F9600
 G1 X92.461 Y64.255 E5.58343 ; wipe and retract
 G1 F9600
 G1 X94.601 Y64.255 E5.07518 ; wipe and retract
 G1 F9600
 G1 X94.601 Y64.828 E4.93903 ; wipe and retract
 G1 F9600
 G1 X92.458 Y64.828 E4.42991 ; wipe and retract
 G1 F9600
 G1 X92.454 Y65.401 E4.29376 ; wipe and retract
 G1 F9600
 G1 X93.513 Y65.401 E4.04234 ; wipe and retract
 G1 E3.79234 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.600 F12000.000 ; lift Z
 G1 X95.608 Y132.215 F12000.000 ; move to first perimeter point
 G1 Z8.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X109.346 Y132.215 E5.40791 F7200.000 ; perimeter
 G1 X109.992 Y136.074 E5.52409 ; perimeter
 G1 X109.992 Y137.923 E5.57898 ; perimeter
 G1 X109.148 Y139.531 E5.63290 ; perimeter
 G1 X107.653 Y140.562 E5.68681 ; perimeter
 G1 X105.814 Y140.785 E5.74183 ; perimeter
 G1 X93.363 Y140.785 E6.11153 ; perimeter
 G1 X91.653 Y140.137 E6.16582 ; perimeter
 G1 X90.449 Y138.778 E6.21974 ; perimeter
 G1 X90.008 Y136.991 E6.27438 ; perimeter
 G1 X90.507 Y59.215 E8.58371 ; perimeter
 G1 X96.608 Y59.215 E8.76486 ; perimeter
 G1 X96.608 Y69.215 E9.06178 ; perimeter
 G1 X98.811 Y69.215 E9.12718 ; perimeter
 G1 X107.942 Y123.815 E10.77084 ; perimeter
 G1 X95.608 Y123.815 E11.13704 ; perimeter
 G1 X95.608 Y132.155 E11.38467 ; perimeter
 G1 X95.608 Y132.615 F12000.000 ; move inwards before travel
 G1 X95.251 Y132.572 F12000.000 ; move to first perimeter point
 G1 X98.451 Y132.572 E11.47968 F7200.000 ; perimeter
 G1 X98.451 Y136.372 E11.59251 ; perimeter
 G1 X105.165 Y136.372 E11.79186 ; perimeter
 G1 X105.165 Y132.572 E11.90469 ; perimeter
 G1 X109.044 Y132.572 E12.01986 ; perimeter
 G1 X109.635 Y136.104 E12.12618 ; perimeter
 G1 X109.635 Y137.835 E12.17758 ; perimeter
 G1 X108.873 Y139.287 E12.22627 ; perimeter
 G1 X107.523 Y140.218 E12.27496 ; perimeter
 G1 X105.792 Y140.428 E12.32672 ; perimeter
 G1 X93.428 Y140.428 E12.69384 ; perimeter
 G1 X91.862 Y139.834 E12.74357 ; perimeter
 G1 X90.774 Y138.607 E12.79226 ; perimeter
 G1 X90.366 Y136.949 E12.84297 ; perimeter
 G1 X90.862 Y59.572 E15.14044 ; perimeter
 G1 X96.251 Y59.572 E15.30046 ; perimeter
 G1 X96.251 Y69.572 E15.59737 ; perimeter
 G1 X98.509 Y69.572 E15.66441 ; perimeter
 G1 X107.520 Y123.458 E17.28656 ; perimeter
 G1 X95.251 Y123.458 E17.65085 ; perimeter
 G1 X95.251 Y132.512 E17.91968 ; perimeter
 G1 X94.894 Y132.929 F12000.000 ; move to first perimeter point
 G1 X98.094 Y132.929 E18.01469 F7200.000 ; perimeter
 G1 X98.094 Y136.729 E18.12751 ; perimeter
 G1 X105.522 Y136.729 E18.34807 ; perimeter
 G1 X105.522 Y132.929 E18.46090 ; perimeter
 G1 X108.742 Y132.929 E18.55649 ; perimeter
 G1 X109.278 Y136.133 E18.65296 ; perimeter
 G1 X109.278 Y137.747 E18.70086 ; perimeter
 G1 X108.597 Y139.043 E18.74432 ; perimeter
 G1 X107.393 Y139.874 E18.78779 ; perimeter
 G1 X105.771 Y140.071 E18.83630 ; perimeter
 G1 X93.493 Y140.071 E19.20083 ; perimeter
 G1 X92.071 Y139.532 E19.24601 ; perimeter
 G1 X91.100 Y138.436 E19.28947 ; perimeter
 G1 X90.723 Y136.906 E19.33624 ; perimeter
 G1 X91.216 Y59.929 E21.62186 ; perimeter
 G1 X95.894 Y59.929 E21.76074 ; perimeter
 G1 X95.894 Y69.929 E22.05765 ; perimeter
 G1 X98.206 Y69.929 E22.12631 ; perimeter
 G1 X107.098 Y123.100 E23.72697 ; perimeter
 G1 X94.894 Y123.100 E24.08933 ; perimeter
 G1 X94.894 Y132.869 E24.37937 ; perimeter
 G1 X94.537 Y133.286 F12000.000 ; move to first perimeter point
 G1 X97.737 Y133.286 E24.47438 F7200.000 ; perimeter
 G1 X97.737 Y137.086 E24.58721 ; perimeter
 G1 X105.879 Y137.086 E24.82897 ; perimeter
 G1 X105.879 Y133.286 E24.94179 ; perimeter
 G1 X108.440 Y133.286 E25.01781 ; perimeter
 G1 X108.921 Y136.163 E25.10442 ; perimeter
 G1 X108.921 Y137.659 E25.14883 ; perimeter
 G1 X108.322 Y138.799 E25.18707 ; perimeter
 G1 X107.262 Y139.530 E25.22530 ; perimeter
 G1 X105.749 Y139.714 E25.27056 ; perimeter
 G1 X93.559 Y139.714 E25.63250 ; perimeter
 G1 X92.280 Y139.229 E25.67313 ; perimeter
 G1 X91.426 Y138.265 E25.71136 ; perimeter
 G1 X91.080 Y136.864 E25.75420 ; perimeter
 G1 X91.571 Y60.286 E28.02796 ; perimeter
 G1 X95.537 Y60.286 E28.14570 ; perimeter
 G1 X95.537 Y69.943 E28.43245 ; perimeter
 G1 X91.819 Y69.943 E28.54283 ; perimeter
 G1 X91.536 Y118.153 E29.97425 ; perimeter
 G1 X91.886 Y119.700 E30.02136 ; perimeter
 G1 X92.975 Y121.041 E30.07265 ; perimeter
 G1 X94.490 Y121.668 E30.12135 ; perimeter
 G1 X101.702 Y121.668 E30.33547 ; perimeter
 G1 X103.161 Y121.475 E30.37918 ; perimeter
 G1 X104.541 Y120.436 E30.43047 ; perimeter
 G1 X105.290 Y118.879 E30.48177 ; perimeter
 G1 X105.290 Y117.343 E30.52737 ; perimeter
 G1 X102.350 Y98.162 E31.10353 ; perimeter
 G1 X102.560 Y98.128 E31.10985 ; perimeter
 G1 X106.677 Y122.743 E31.85085 ; perimeter
 G1 X94.537 Y122.743 E32.21129 ; perimeter
 G1 X94.537 Y133.226 E32.52253 ; perimeter
 G1 F9600
 G1 X97.737 Y133.286 E31.76239 ; wipe and retract
 G1 F9600
 G1 X97.737 Y137.086 E30.85989 ; wipe and retract
 G1 F9600
 G1 X105.879 Y137.086 E28.92606 ; wipe and retract
 G1 F9600
 G1 X105.879 Y133.286 E28.02356 ; wipe and retract
 G1 F9600
 G1 X106.936 Y133.286 E27.77253 ; wipe and retract
 G1 E27.52253 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.800 F12000.000 ; lift Z
 G1 X95.180 Y69.586 F12000.000 ; move to first perimeter point
 G1 Z8.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.869 Y69.586 E5.09831 F7200.000 ; perimeter
 G1 X91.926 Y60.643 E5.36386 ; perimeter
 G1 X95.180 Y60.643 E5.46047 ; perimeter
 G1 X95.180 Y69.526 E5.72422 ; perimeter
 G1 X94.823 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.228 Y69.229 E5.80126 F7200.000 ; perimeter
 G1 X92.281 Y61.000 E6.04560 ; perimeter
 G1 X94.823 Y61.000 E6.12108 ; perimeter
 G1 X94.823 Y69.169 E6.36363 ; perimeter
 G1 F9600
 G1 X92.228 Y69.229 E5.74724 ; wipe and retract
 G1 F9600
 G1 X92.281 Y61.000 E3.79276 ; wipe and retract
 G1 F9600
 G1 X94.823 Y61.000 E3.18906 ; wipe and retract
 G1 F9600
 G1 X94.823 Y67.633 E1.61363 ; wipe and retract
 G1 E1.36363 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.800 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z8.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X106.236 Y137.443 E5.80503 ; perimeter
 G1 X106.236 Y133.643 E5.91785 ; perimeter
 G1 X108.137 Y133.643 E5.97429 ; perimeter
 G1 X108.564 Y136.193 E6.05104 ; perimeter
 G1 X108.564 Y137.571 E6.09196 ; perimeter
 G1 X108.047 Y138.555 E6.12497 ; perimeter
 G1 X107.132 Y139.187 E6.15798 ; perimeter
 G1 X105.728 Y139.357 E6.19998 ; perimeter
 G1 X93.624 Y139.357 E6.55934 ; perimeter
 G1 X92.488 Y138.926 E6.59541 ; perimeter
 G1 X91.751 Y138.094 E6.62842 ; perimeter
 G1 X91.438 Y136.822 E6.66732 ; perimeter
 G1 X91.546 Y119.849 E7.17128 ; perimeter
 G1 X92.754 Y121.337 E7.22818 ; perimeter
 G1 X94.419 Y122.025 E7.28168 ; perimeter
 G1 X101.725 Y122.025 E7.49860 ; perimeter
 G1 X103.301 Y121.817 E7.54579 ; perimeter
 G1 X104.825 Y120.669 E7.60245 ; perimeter
 G1 X105.561 Y119.141 E7.65279 ; perimeter
 G1 X105.716 Y119.163 E7.65745 ; perimeter
 G1 X106.255 Y122.386 E7.75447 ; perimeter
 G1 X94.240 Y122.386 E8.11121 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E8.11579 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E8.16422 ; perimeter
 G1 X105.394 Y120.311 E8.18370 ; perimeter
 G1 X105.549 Y120.333 E8.18835 ; perimeter
 G1 X105.833 Y122.029 E8.23942 ; perimeter
 G1 X103.916 Y122.029 E8.29635 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E8.25304 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.86568 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E7.70986 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E7.67261 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E7.26411 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.80871 ; wipe and retract
 G1 E3.29635 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.800 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z8.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X106.593 Y137.800 E5.49201 ; perimeter
 G1 X106.593 Y134.000 E5.60483 ; perimeter
 G1 X107.835 Y134.000 E5.64169 ; perimeter
 G1 X108.207 Y136.222 E5.70859 ; perimeter
 G1 X108.207 Y137.482 E5.74601 ; perimeter
 G1 X107.772 Y138.311 E5.77380 ; perimeter
 G1 X107.001 Y138.843 E5.80158 ; perimeter
 G1 X105.706 Y139.000 E5.84033 ; perimeter
 G1 X93.690 Y139.000 E6.19710 ; perimeter
 G1 X92.697 Y138.624 E6.22862 ; perimeter
 G1 X92.077 Y137.923 E6.25640 ; perimeter
 G1 X91.795 Y136.780 E6.29137 ; perimeter
 G1 X91.897 Y120.847 E6.76443 ; perimeter
 G1 X92.534 Y121.632 E6.79444 ; perimeter
 G1 X93.823 Y122.165 E6.83584 ; perimeter
 G1 X93.823 Y133.940 E7.18545 ; perimeter
 G1 F9600
 G1 X97.023 Y134.000 E6.42532 ; wipe and retract
 G1 F9600
 G1 X97.023 Y137.800 E5.52282 ; wipe and retract
 G1 F9600
 G1 X106.593 Y137.800 E3.24976 ; wipe and retract
 G1 F9600
 G1 X106.593 Y134.371 E2.43545 ; wipe and retract
 G1 E2.18545 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.800 F12000.000 ; lift Z
 G1 X92.884 Y71.015 F12000.000 ; move to first perimeter point
 G1 Z8.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.105 Y71.015 E5.12531 F7200.000 ; perimeter
 G1 X104.219 Y117.425 E6.51939 ; perimeter
 G1 X104.219 Y118.635 E6.55531 ; perimeter
 G1 X103.689 Y119.737 E6.59162 ; perimeter
 G1 X102.742 Y120.450 E6.62683 ; perimeter
 G1 X101.631 Y120.597 E6.66009 ; perimeter
 G1 X94.703 Y120.597 E6.86579 ; perimeter
 G1 X93.635 Y120.155 E6.90011 ; perimeter
 G1 X92.875 Y119.220 E6.93589 ; perimeter
 G1 X92.608 Y118.036 E6.97191 ; perimeter
 G1 X92.884 Y71.075 E8.36629 ; perimeter
 G1 X92.885 Y70.615 F12000.000 ; move inwards before travel
 G1 X92.529 Y70.658 F12000.000 ; move to first perimeter point
 G1 X97.411 Y70.658 E8.51124 F7200.000 ; perimeter
 G1 X104.576 Y117.398 E9.91523 ; perimeter
 G1 X104.576 Y118.716 E9.95438 ; perimeter
 G1 X103.973 Y119.970 E9.99568 ; perimeter
 G1 X102.881 Y120.792 E10.03626 ; perimeter
 G1 X101.655 Y120.954 E10.07300 ; perimeter
 G1 X94.632 Y120.954 E10.28150 ; perimeter
 G1 X93.415 Y120.451 E10.32062 ; perimeter
 G1 X92.545 Y119.380 E10.36157 ; perimeter
 G1 X92.251 Y118.075 E10.40129 ; perimeter
 G1 X92.529 Y70.718 E11.80742 ; perimeter
 G1 X92.174 Y70.300 F12000.000 ; move to first perimeter point
 G1 X97.718 Y70.300 E11.97201 F7200.000 ; perimeter
 G1 X104.933 Y117.371 E13.38591 ; perimeter
 G1 X104.933 Y118.797 E13.42828 ; perimeter
 G1 X104.257 Y120.203 E13.47458 ; perimeter
 G1 X103.021 Y121.133 E13.52051 ; perimeter
 G1 X101.678 Y121.311 E13.56074 ; perimeter
 G1 X94.561 Y121.311 E13.77205 ; perimeter
 G1 X93.195 Y120.746 E13.81596 ; perimeter
 G1 X92.216 Y119.540 E13.86208 ; perimeter
 G1 X91.893 Y118.114 E13.90549 ; perimeter
 G1 X92.174 Y70.360 E15.32338 ; perimeter
 G1 F9600
 G1 X97.718 Y70.300 E14.00664 ; wipe and retract
 G1 F9600
 G1 X99.908 Y84.589 E10.57338 ; wipe and retract
 G1 E10.32338 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.800 F12000.000 ; lift Z
 G1 X98.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z8.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X104.808 Y133.015 E5.17815 F7200.000 ; perimeter
 G1 X104.808 Y136.015 E5.26722 ; perimeter
 G1 X98.808 Y136.015 E5.44537 ; perimeter
 G1 X98.808 Y133.075 E5.53266 ; perimeter
 G1 X98.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X104.987 Y132.615 E5.93285 F1800.000 ; infill
 G1 X107.260 Y134.201 F12000.000 ; move to first infill point
 G1 X107.260 Y138.384 E6.12703 F7200.000 ; infill
 G1 X106.701 Y138.675 E6.15627 ; infill
 G1 X106.701 Y138.001 E6.18755 ; infill
 G1 X106.143 Y138.001 E6.21347 ; infill
 G1 X106.143 Y138.743 E6.24790 ; infill
 G1 X105.585 Y138.779 E6.27388 ; infill
 G1 X105.585 Y138.001 E6.30996 ; infill
 G1 X105.026 Y138.001 E6.33589 ; infill
 G1 X105.026 Y138.779 E6.37197 ; infill
 G1 X104.468 Y138.779 E6.39790 ; infill
 G1 X104.468 Y138.001 E6.43398 ; infill
 G1 X103.909 Y138.001 E6.45991 ; infill
 G1 X103.909 Y138.779 E6.49599 ; infill
 G1 X103.351 Y138.779 E6.52192 ; infill
 G1 X103.351 Y138.001 E6.55800 ; infill
 G1 X102.793 Y138.001 E6.58393 ; infill
 G1 X102.793 Y138.779 E6.62001 ; infill
 G1 X102.234 Y138.779 E6.64594 ; infill
 G1 X102.234 Y138.001 E6.68202 ; infill
 G1 X101.676 Y138.001 E6.70795 ; infill
 G1 X101.676 Y138.779 E6.74403 ; infill
 G1 X101.118 Y138.779 E6.76996 ; infill
 G1 X101.118 Y138.001 E6.80604 ; infill
 G1 X100.559 Y138.001 E6.83197 ; infill
 G1 X100.559 Y138.779 E6.86805 ; infill
 G1 X100.001 Y138.779 E6.89398 ; infill
 G1 X100.001 Y138.001 E6.93006 ; infill
 G1 X99.443 Y138.001 E6.95599 ; infill
 G1 X99.443 Y138.779 E6.99208 ; infill
 G1 X98.884 Y138.779 E7.01800 ; infill
 G1 X98.884 Y138.001 E7.05409 ; infill
 G1 X98.326 Y138.001 E7.08001 ; infill
 G1 X98.326 Y138.779 E7.11610 ; infill
 G1 X97.767 Y138.779 E7.14202 ; infill
 G1 X97.767 Y138.001 E7.17810 ; infill
 G1 X97.209 Y138.001 E7.20403 ; infill
 G1 X97.209 Y138.779 E7.24011 ; infill
 G1 X96.651 Y138.779 E7.26604 ; infill
 G1 X96.651 Y134.201 E7.47855 ; infill
 G1 X96.092 Y134.201 E7.50448 ; infill
 G1 X96.092 Y138.779 E7.71699 ; infill
 G1 X95.534 Y138.779 E7.74291 ; infill
 G1 X95.534 Y134.201 E7.95542 ; infill
 G1 X94.976 Y134.201 E7.98135 ; infill
 G1 X94.976 Y138.779 E8.19386 ; infill
 G1 X94.417 Y138.779 E8.21978 ; infill
 G1 X94.417 Y134.201 E8.43230 ; infill
 G1 X93.859 Y134.201 E8.45822 ; infill
 G1 X93.859 Y138.779 E8.67073 ; infill
 G1 X93.301 Y138.625 E8.69762 ; infill
 G1 X93.301 Y122.181 E9.46111 ; infill
 G1 X92.742 Y121.950 E9.48917 ; infill
 G1 X92.742 Y138.286 E10.24761 ; infill
 G1 X92.184 Y136.984 F12000.000 ; move to first infill point
 G1 X92.184 Y133.450 E10.41173 F7200.000 ; infill
 G1 F9600
 G1 X92.184 Y136.984 E9.57222 ; wipe and retract
 G1 E5.41173 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.800 F12000.000 ; lift Z
 G1 X107.818 Y135.966 F12000.000 ; move to first infill point
 G1 Z8.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X107.818 Y137.597 E5.07572 F7200.000 ; infill
 G1 F9600
 G1 X107.818 Y135.966 E4.68840 ; wipe and retract
 G1 E0.07572 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.800 F12000.000 ; lift Z
 G1 X91.703 Y119.744 F12000.000 ; move to first infill point
 G1 Z8.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.491 Y119.308 E5.01440 F1800.000 ; infill
 G1 X91.388 Y118.357 E5.04280 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E4.81559 ; wipe and retract
 G1 F9600
 G1 X91.703 Y119.744 E4.70044 ; wipe and retract
 G1 E0.04280 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.800 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z8.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X104.774 Y121.808 F12000.000 ; move to first infill point
 G1 X104.774 Y121.449 E5.07163 F7200.000 ; infill
 G1 X105.374 Y121.352 E5.10194 ; infill
 G1 X105.374 Y121.808 E5.12466 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.930 E5.19070 F1800.000 ; infill
 G1 X105.528 Y117.321 E5.20887 F1800.000 ; infill
 G1 X104.413 Y110.364 E5.41805 ; infill
 G1 X102.427 Y97.969 F12000.000 ; move to first infill point
 G1 X98.594 Y74.053 E6.94282 F1800.000 ; infill
 G1 X98.594 Y74.053 F12000.000 ; move to first infill point
 G1 X97.962 Y70.107 E7.06146 F1800.000 ; infill
 G1 X94.434 Y69.008 F12000.000 ; move to first infill point
 G1 X94.434 Y66.551 E7.18508 F7200.000 ; infill
 G1 X93.829 Y66.551 E7.21552 ; infill
 G1 X93.829 Y69.008 E7.33915 ; infill
 G1 X93.224 Y69.008 E7.36959 ; infill
 G1 X93.224 Y66.551 E7.49322 ; infill
 G1 X92.619 Y66.551 E7.52366 ; infill
 G1 X92.619 Y69.008 E7.64728 ; infill
 G1 X92.536 Y66.368 F12000.000 ; move to first infill point
 G1 X92.536 Y63.034 E7.75808 F7200.000 ; infill
 G1 X92.935 Y61.181 F12000.000 ; move to first infill point
 G1 X92.935 Y66.368 E7.93046 F7200.000 ; infill
 G1 X93.335 Y66.368 E7.94375 ; infill
 G1 X93.335 Y61.181 E8.11612 ; infill
 G1 X93.735 Y61.181 E8.12941 ; infill
 G1 X93.735 Y66.368 E8.30179 ; infill
 G1 X94.134 Y66.368 E8.31507 ; infill
 G1 X94.134 Y61.181 E8.48745 ; infill
 G1 X94.534 Y61.181 E8.50074 ; infill
 G1 X94.534 Y66.368 E8.67312 ; infill
 M106 S237.15 ; enable fan
 G1 F9600
 G1 X94.534 Y61.181 E7.44137 ; wipe and retract
 G1 F9600
 G1 X94.134 Y61.181 E7.34643 ; wipe and retract
 G1 F9600
 G1 X94.134 Y66.368 E6.11469 ; wipe and retract
 G1 F9600
 G1 X93.735 Y66.368 E6.01975 ; wipe and retract
 G1 F9600
 G1 X93.735 Y61.181 E4.78800 ; wipe and retract
 G1 F9600
 G1 X93.335 Y61.181 E4.69307 ; wipe and retract
 G1 F9600
 G1 X93.335 Y64.423 E3.92312 ; wipe and retract
 G1 E3.67312 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z9.800 F12000.000 ; lift Z
 G1 X95.608 Y132.215 F12000.000 ; move to first perimeter point
 G1 Z9.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X109.346 Y132.215 E5.40791 F7200.000 ; perimeter
 G1 X109.992 Y136.074 E5.52409 ; perimeter
 G1 X109.992 Y137.923 E5.57898 ; perimeter
 G1 X109.148 Y139.531 E5.63290 ; perimeter
 G1 X107.653 Y140.562 E5.68681 ; perimeter
 G1 X105.814 Y140.785 E5.74183 ; perimeter
 G1 X93.363 Y140.785 E6.11153 ; perimeter
 G1 X91.653 Y140.137 E6.16582 ; perimeter
 G1 X90.449 Y138.778 E6.21974 ; perimeter
 G1 X90.008 Y136.991 E6.27438 ; perimeter
 G1 X90.478 Y63.639 E8.45233 ; perimeter
 G1 X96.608 Y63.639 E8.63433 ; perimeter
 G1 X96.608 Y69.215 E8.79988 ; perimeter
 G1 X98.811 Y69.215 E8.86528 ; perimeter
 G1 X107.942 Y123.815 E10.50894 ; perimeter
 G1 X95.608 Y123.815 E10.87514 ; perimeter
 G1 X95.608 Y132.155 E11.12277 ; perimeter
 G1 X95.608 Y132.615 F12000.000 ; move inwards before travel
 G1 X95.251 Y132.572 F12000.000 ; move to first perimeter point
 G1 X98.451 Y132.572 E11.21778 F7200.000 ; perimeter
 G1 X98.451 Y136.372 E11.33061 ; perimeter
 G1 X105.165 Y136.372 E11.52996 ; perimeter
 G1 X105.165 Y132.572 E11.64279 ; perimeter
 G1 X109.044 Y132.572 E11.75796 ; perimeter
 G1 X109.635 Y136.104 E11.86428 ; perimeter
 G1 X109.635 Y137.835 E11.91568 ; perimeter
 G1 X108.873 Y139.287 E11.96437 ; perimeter
 G1 X107.523 Y140.218 E12.01306 ; perimeter
 G1 X105.792 Y140.428 E12.06482 ; perimeter
 G1 X93.428 Y140.428 E12.43194 ; perimeter
 G1 X91.862 Y139.834 E12.48167 ; perimeter
 G1 X90.774 Y138.607 E12.53036 ; perimeter
 G1 X90.366 Y136.949 E12.58107 ; perimeter
 G1 X90.833 Y63.996 E14.74717 ; perimeter
 G1 X96.251 Y63.996 E14.90803 ; perimeter
 G1 X96.251 Y69.572 E15.07357 ; perimeter
 G1 X98.509 Y69.572 E15.14061 ; perimeter
 G1 X107.520 Y123.458 E16.76276 ; perimeter
 G1 X95.251 Y123.458 E17.12705 ; perimeter
 G1 X95.251 Y132.512 E17.39588 ; perimeter
 G1 X94.894 Y132.929 F12000.000 ; move to first perimeter point
 G1 X98.094 Y132.929 E17.49089 F7200.000 ; perimeter
 G1 X98.094 Y136.729 E17.60372 ; perimeter
 G1 X105.522 Y136.729 E17.82427 ; perimeter
 G1 X105.522 Y132.929 E17.93710 ; perimeter
 G1 X108.742 Y132.929 E18.03269 ; perimeter
 G1 X109.278 Y136.133 E18.12916 ; perimeter
 G1 X109.278 Y137.747 E18.17706 ; perimeter
 G1 X108.597 Y139.043 E18.22052 ; perimeter
 G1 X107.393 Y139.874 E18.26399 ; perimeter
 G1 X105.771 Y140.071 E18.31250 ; perimeter
 G1 X93.493 Y140.071 E18.67703 ; perimeter
 G1 X92.071 Y139.532 E18.72221 ; perimeter
 G1 X91.100 Y138.436 E18.76567 ; perimeter
 G1 X90.723 Y136.906 E18.81244 ; perimeter
 G1 X91.188 Y64.353 E20.96669 ; perimeter
 G1 X95.894 Y64.353 E21.10641 ; perimeter
 G1 X95.894 Y69.929 E21.27195 ; perimeter
 G1 X98.206 Y69.929 E21.34061 ; perimeter
 G1 X107.098 Y123.100 E22.94127 ; perimeter
 G1 X94.894 Y123.100 E23.30363 ; perimeter
 G1 X94.894 Y132.869 E23.59367 ; perimeter
 G1 X94.537 Y133.286 F12000.000 ; move to first perimeter point
 G1 X97.737 Y133.286 E23.68868 F7200.000 ; perimeter
 G1 X97.737 Y137.086 E23.80151 ; perimeter
 G1 X105.879 Y137.086 E24.04327 ; perimeter
 G1 X105.879 Y133.286 E24.15609 ; perimeter
 G1 X108.440 Y133.286 E24.23211 ; perimeter
 G1 X108.921 Y136.163 E24.31872 ; perimeter
 G1 X108.921 Y137.659 E24.36313 ; perimeter
 G1 X108.322 Y138.799 E24.40137 ; perimeter
 G1 X107.262 Y139.530 E24.43960 ; perimeter
 G1 X105.749 Y139.714 E24.48486 ; perimeter
 G1 X93.559 Y139.714 E24.84680 ; perimeter
 G1 X92.280 Y139.229 E24.88743 ; perimeter
 G1 X91.426 Y138.265 E24.92567 ; perimeter
 G1 X91.080 Y136.864 E24.96850 ; perimeter
 G1 X91.543 Y64.710 E27.11089 ; perimeter
 G1 X95.537 Y64.710 E27.22948 ; perimeter
 G1 X95.537 Y69.943 E27.38485 ; perimeter
 G1 X91.819 Y69.943 E27.49523 ; perimeter
 G1 X91.536 Y118.153 E28.92665 ; perimeter
 G1 X91.886 Y119.700 E28.97376 ; perimeter
 G1 X92.975 Y121.041 E29.02505 ; perimeter
 G1 X94.490 Y121.668 E29.07375 ; perimeter
 G1 X101.702 Y121.668 E29.28787 ; perimeter
 G1 X103.161 Y121.475 E29.33158 ; perimeter
 G1 X104.541 Y120.436 E29.38288 ; perimeter
 G1 X105.290 Y118.879 E29.43417 ; perimeter
 G1 X105.290 Y117.343 E29.47977 ; perimeter
 G1 X102.350 Y98.162 E30.05593 ; perimeter
 G1 X102.560 Y98.128 E30.06225 ; perimeter
 G1 X106.677 Y122.743 E30.80325 ; perimeter
 G1 X94.537 Y122.743 E31.16369 ; perimeter
 G1 X94.537 Y133.226 E31.47493 ; perimeter
 G1 F9600
 G1 X97.737 Y133.286 E30.71480 ; wipe and retract
 G1 F9600
 G1 X97.737 Y137.086 E29.81230 ; wipe and retract
 G1 F9600
 G1 X105.879 Y137.086 E27.87846 ; wipe and retract
 G1 F9600
 G1 X105.879 Y133.286 E26.97596 ; wipe and retract
 G1 F9600
 G1 X106.936 Y133.286 E26.72493 ; wipe and retract
 G1 E26.47493 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.000 F12000.000 ; lift Z
 G1 X95.180 Y69.586 F12000.000 ; move to first perimeter point
 G1 Z9.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.869 Y69.586 E5.09831 F7200.000 ; perimeter
 G1 X91.898 Y65.067 E5.23248 ; perimeter
 G1 X95.180 Y65.067 E5.32994 ; perimeter
 G1 X95.180 Y69.526 E5.46232 ; perimeter
 G1 X94.823 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.228 Y69.229 E5.53936 F7200.000 ; perimeter
 G1 X92.252 Y65.425 E5.65233 ; perimeter
 G1 X94.823 Y65.425 E5.72865 ; perimeter
 G1 X94.823 Y69.169 E5.83983 ; perimeter
 G1 F9600
 G1 X92.228 Y69.229 E5.22344 ; wipe and retract
 G1 F9600
 G1 X92.252 Y65.425 E4.31980 ; wipe and retract
 G1 F9600
 G1 X94.823 Y65.425 E3.70937 ; wipe and retract
 G1 F9600
 G1 X94.823 Y69.169 E2.82000 ; wipe and retract
 G1 E0.83983 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.000 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z9.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X106.236 Y137.443 E5.80503 ; perimeter
 G1 X106.236 Y133.643 E5.91785 ; perimeter
 G1 X108.137 Y133.643 E5.97429 ; perimeter
 G1 X108.564 Y136.193 E6.05104 ; perimeter
 G1 X108.564 Y137.571 E6.09196 ; perimeter
 G1 X108.047 Y138.555 E6.12497 ; perimeter
 G1 X107.132 Y139.187 E6.15798 ; perimeter
 G1 X105.728 Y139.357 E6.19998 ; perimeter
 G1 X93.624 Y139.357 E6.55934 ; perimeter
 G1 X92.488 Y138.926 E6.59541 ; perimeter
 G1 X91.751 Y138.094 E6.62842 ; perimeter
 G1 X91.438 Y136.822 E6.66732 ; perimeter
 G1 X91.546 Y119.849 E7.17128 ; perimeter
 G1 X92.754 Y121.337 E7.22818 ; perimeter
 G1 X94.419 Y122.025 E7.28168 ; perimeter
 G1 X101.725 Y122.025 E7.49860 ; perimeter
 G1 X103.301 Y121.817 E7.54579 ; perimeter
 G1 X104.825 Y120.669 E7.60245 ; perimeter
 G1 X105.561 Y119.141 E7.65279 ; perimeter
 G1 X105.716 Y119.163 E7.65745 ; perimeter
 G1 X106.255 Y122.386 E7.75447 ; perimeter
 G1 X94.240 Y122.386 E8.11121 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E8.11579 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E8.16422 ; perimeter
 G1 X105.394 Y120.311 E8.18370 ; perimeter
 G1 X105.549 Y120.333 E8.18835 ; perimeter
 G1 X105.833 Y122.029 E8.23942 ; perimeter
 G1 X103.916 Y122.029 E8.29635 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E8.25304 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.86568 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E7.70986 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E7.67261 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E7.26411 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.80871 ; wipe and retract
 G1 E3.29635 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.000 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z9.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X106.593 Y137.800 E5.49201 ; perimeter
 G1 X106.593 Y134.000 E5.60483 ; perimeter
 G1 X107.835 Y134.000 E5.64169 ; perimeter
 G1 X108.207 Y136.222 E5.70859 ; perimeter
 G1 X108.207 Y137.482 E5.74601 ; perimeter
 G1 X107.772 Y138.311 E5.77380 ; perimeter
 G1 X107.001 Y138.843 E5.80158 ; perimeter
 G1 X105.706 Y139.000 E5.84033 ; perimeter
 G1 X93.690 Y139.000 E6.19710 ; perimeter
 G1 X92.697 Y138.624 E6.22862 ; perimeter
 G1 X92.077 Y137.923 E6.25640 ; perimeter
 G1 X91.795 Y136.780 E6.29137 ; perimeter
 G1 X91.897 Y120.847 E6.76443 ; perimeter
 G1 X92.534 Y121.632 E6.79444 ; perimeter
 G1 X93.823 Y122.165 E6.83584 ; perimeter
 G1 X93.823 Y133.940 E7.18545 ; perimeter
 G1 F9600
 G1 X97.023 Y134.000 E6.42532 ; wipe and retract
 G1 F9600
 G1 X97.023 Y137.800 E5.52282 ; wipe and retract
 G1 F9600
 G1 X106.593 Y137.800 E3.24976 ; wipe and retract
 G1 F9600
 G1 X106.593 Y134.371 E2.43545 ; wipe and retract
 G1 E2.18545 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.000 F12000.000 ; lift Z
 G1 X92.884 Y71.015 F12000.000 ; move to first perimeter point
 G1 Z9.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.105 Y71.015 E5.12531 F7200.000 ; perimeter
 G1 X104.219 Y117.425 E6.51939 ; perimeter
 G1 X104.219 Y118.635 E6.55531 ; perimeter
 G1 X103.689 Y119.737 E6.59162 ; perimeter
 G1 X102.742 Y120.450 E6.62683 ; perimeter
 G1 X101.631 Y120.597 E6.66009 ; perimeter
 G1 X94.703 Y120.597 E6.86579 ; perimeter
 G1 X93.635 Y120.155 E6.90011 ; perimeter
 G1 X92.875 Y119.220 E6.93589 ; perimeter
 G1 X92.608 Y118.036 E6.97191 ; perimeter
 G1 X92.884 Y71.075 E8.36629 ; perimeter
 G1 X92.885 Y70.615 F12000.000 ; move inwards before travel
 G1 X92.529 Y70.658 F12000.000 ; move to first perimeter point
 G1 X97.411 Y70.658 E8.51124 F7200.000 ; perimeter
 G1 X104.576 Y117.398 E9.91523 ; perimeter
 G1 X104.576 Y118.716 E9.95438 ; perimeter
 G1 X103.973 Y119.970 E9.99568 ; perimeter
 G1 X102.881 Y120.792 E10.03626 ; perimeter
 G1 X101.655 Y120.954 E10.07300 ; perimeter
 G1 X94.632 Y120.954 E10.28150 ; perimeter
 G1 X93.415 Y120.451 E10.32062 ; perimeter
 G1 X92.545 Y119.380 E10.36157 ; perimeter
 G1 X92.251 Y118.075 E10.40129 ; perimeter
 G1 X92.529 Y70.718 E11.80742 ; perimeter
 G1 X92.174 Y70.300 F12000.000 ; move to first perimeter point
 G1 X97.718 Y70.300 E11.97201 F7200.000 ; perimeter
 G1 X104.933 Y117.371 E13.38591 ; perimeter
 G1 X104.933 Y118.797 E13.42828 ; perimeter
 G1 X104.257 Y120.203 E13.47458 ; perimeter
 G1 X103.021 Y121.133 E13.52051 ; perimeter
 G1 X101.678 Y121.311 E13.56074 ; perimeter
 G1 X94.561 Y121.311 E13.77205 ; perimeter
 G1 X93.195 Y120.746 E13.81596 ; perimeter
 G1 X92.216 Y119.540 E13.86208 ; perimeter
 G1 X91.893 Y118.114 E13.90549 ; perimeter
 G1 X92.174 Y70.360 E15.32338 ; perimeter
 G1 F9600
 G1 X97.718 Y70.300 E14.00664 ; wipe and retract
 G1 F9600
 G1 X99.908 Y84.589 E10.57338 ; wipe and retract
 G1 E10.32338 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.000 F12000.000 ; lift Z
 G1 X98.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z9.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X104.808 Y133.015 E5.17815 F7200.000 ; perimeter
 G1 X104.808 Y136.015 E5.26722 ; perimeter
 G1 X98.808 Y136.015 E5.44537 ; perimeter
 G1 X98.808 Y133.075 E5.53266 ; perimeter
 G1 X98.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X104.987 Y132.615 E5.93285 F1800.000 ; infill
 G1 X107.726 Y134.586 F12000.000 ; move to first infill point
 G1 X106.795 Y134.586 E5.97739 F7200.000 ; infill
 G1 X106.795 Y135.161 E6.00489 ; infill
 G1 X107.823 Y135.161 E6.05403 ; infill
 G1 X107.919 Y135.736 E6.08192 ; infill
 G1 X106.795 Y135.736 E6.13566 ; infill
 G1 X106.795 Y136.311 E6.16316 ; infill
 G1 X107.985 Y136.311 E6.22008 ; infill
 G1 X107.985 Y136.886 E6.24758 ; infill
 G1 X106.795 Y136.886 E6.30450 ; infill
 G1 X106.795 Y137.461 E6.33200 ; infill
 G1 X107.969 Y137.461 E6.38812 ; infill
 G1 X107.667 Y138.036 E6.41918 ; infill
 G1 X106.795 Y138.036 E6.46087 ; infill
 G1 X106.015 Y138.612 E6.50720 ; infill
 G1 X93.538 Y138.612 E7.10389 ; infill
 G1 X96.821 Y138.036 F12000.000 ; move to first infill point
 G1 X92.502 Y138.036 E7.31042 F7200.000 ; infill
 G1 X92.175 Y137.461 E7.34205 ; infill
 G1 X96.821 Y137.461 E7.56422 ; infill
 G1 X96.821 Y136.886 E7.59172 ; infill
 G1 X92.034 Y136.886 E7.82067 ; infill
 G1 X92.017 Y136.311 E7.84818 ; infill
 G1 X96.821 Y136.311 E8.07794 ; infill
 G1 X96.821 Y135.736 E8.10544 ; infill
 G1 X92.017 Y135.736 E8.33519 ; infill
 G1 X92.017 Y135.161 E8.36269 ; infill
 G1 X96.821 Y135.161 E8.59245 ; infill
 G1 X96.821 Y134.586 E8.61995 ; infill
 G1 X92.017 Y134.586 E8.84971 ; infill
 G1 X93.621 Y134.011 F12000.000 ; move to first infill point
 G1 X92.017 Y134.011 E8.92644 F7200.000 ; infill
 G1 X92.018 Y133.436 E8.95394 ; infill
 G1 X93.621 Y133.436 E9.03062 ; infill
 G1 X93.621 Y132.860 E9.05812 ; infill
 G1 X92.022 Y132.860 E9.13462 ; infill
 G1 X92.025 Y132.285 E9.16212 ; infill
 G1 X93.621 Y132.285 E9.23845 ; infill
 G1 X93.621 Y131.710 E9.26595 ; infill
 G1 X92.029 Y131.710 E9.34210 ; infill
 G1 X92.033 Y131.135 E9.36960 ; infill
 G1 X93.621 Y131.135 E9.44557 ; infill
 G1 X93.621 Y130.560 E9.47307 ; infill
 G1 X92.036 Y130.560 E9.54887 ; infill
 G1 X92.040 Y129.985 E9.57637 ; infill
 G1 X93.621 Y129.985 E9.65199 ; infill
 G1 X93.621 Y129.410 E9.67949 ; infill
 G1 X92.044 Y129.410 E9.75493 ; infill
 G1 X92.047 Y128.835 E9.78243 ; infill
 G1 X93.621 Y128.835 E9.85770 ; infill
 G1 X93.621 Y128.260 E9.88520 ; infill
 G1 X92.051 Y128.260 E9.96029 ; infill
 G1 X92.055 Y127.685 E9.98780 ; infill
 G1 X93.621 Y127.685 E10.06271 ; infill
 G1 X93.621 Y127.109 E10.09021 ; infill
 G1 X92.058 Y127.109 E10.16495 ; infill
 G1 X92.062 Y126.534 E10.19245 ; infill
 G1 X93.621 Y126.534 E10.26701 ; infill
 G1 X93.621 Y125.959 E10.29451 ; infill
 G1 X92.066 Y125.959 E10.36890 ; infill
 G1 X92.069 Y125.384 E10.39640 ; infill
 G1 X93.621 Y125.384 E10.47061 ; infill
 G1 X93.621 Y124.809 E10.49811 ; infill
 G1 X92.073 Y124.809 E10.57214 ; infill
 G1 X92.077 Y124.234 E10.59965 ; infill
 G1 X93.621 Y124.234 E10.67350 ; infill
 G1 X93.621 Y123.659 E10.70100 ; infill
 G1 X92.081 Y123.659 E10.77468 ; infill
 G1 X92.084 Y123.084 E10.80219 ; infill
 G1 X93.621 Y123.084 E10.87569 ; infill
 G1 X93.621 Y122.509 E10.90319 ; infill
 G1 X92.088 Y122.509 E10.97652 ; infill
 G1 X92.092 Y121.934 E11.00402 ; infill
 G1 X92.472 Y121.934 E11.02219 ; infill
 G1 X91.703 Y119.744 F12000.000 ; move to first infill point
 G1 X91.491 Y119.308 E11.03659 F1800.000 ; infill
 G1 X91.388 Y118.357 E11.06499 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E10.83778 ; wipe and retract
 G1 F9600
 G1 X91.703 Y119.744 E10.72263 ; wipe and retract
 G1 E6.06499 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.000 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z9.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X105.107 Y121.240 F12000.000 ; move to first infill point
 G1 X105.494 Y121.240 E5.07167 F7200.000 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.930 E5.13770 F1800.000 ; infill
 G1 X105.579 Y117.930 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.15587 F1800.000 ; infill
 G1 X104.413 Y110.364 E5.36505 ; infill
 G1 X102.427 Y97.969 F12000.000 ; move to first infill point
 G1 X98.594 Y74.053 E6.88983 F1800.000 ; infill
 G1 X98.594 Y74.053 F12000.000 ; move to first infill point
 G1 X97.962 Y70.107 E7.00846 F1800.000 ; infill
 G1 X94.601 Y68.841 F12000.000 ; move to first infill point
 G1 X92.452 Y68.841 E7.11669 F7200.000 ; infill
 G1 X92.452 Y68.235 E7.14718 ; infill
 G1 X94.601 Y68.235 E7.25540 ; infill
 G1 X94.601 Y67.630 E7.28589 ; infill
 G1 X92.452 Y67.630 E7.39411 ; infill
 G1 X92.452 Y67.024 E7.42460 ; infill
 G1 X94.601 Y67.024 E7.53282 ; infill
 G1 X94.601 Y66.419 E7.56331 ; infill
 G1 X92.452 Y66.419 E7.67154 ; infill
 G1 X92.452 Y65.813 E7.70203 ; infill
 G1 X94.601 Y65.813 E7.81025 ; infill
 G1 F9600
 G1 X92.452 Y65.813 E7.29977 ; wipe and retract
 G1 F9600
 G1 X92.452 Y66.419 E7.15595 ; wipe and retract
 G1 F9600
 G1 X94.601 Y66.419 E6.64548 ; wipe and retract
 G1 F9600
 G1 X94.601 Y67.024 E6.50166 ; wipe and retract
 G1 F9600
 G1 X92.452 Y67.024 E5.99118 ; wipe and retract
 G1 F9600
 G1 X92.452 Y67.630 E5.84737 ; wipe and retract
 G1 F9600
 G1 X94.601 Y67.630 E5.33689 ; wipe and retract
 G1 F9600
 G1 X94.601 Y68.235 E5.19307 ; wipe and retract
 G1 F9600
 G1 X92.452 Y68.235 E4.68259 ; wipe and retract
 G1 F9600
 G1 X92.452 Y68.841 E4.53878 ; wipe and retract
 G1 F9600
 G1 X94.601 Y68.841 E4.02830 ; wipe and retract
 G1 E2.81025 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.000 F12000.000 ; lift Z
 G1 X96.608 Y62.390 F12000.000 ; move to first perimeter point
 G1 Z9.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X90.486 Y62.390 E5.18176 F7200.000 ; perimeter
 G1 X90.507 Y59.215 E5.27605 ; perimeter
 G1 X96.608 Y59.215 E5.45720 ; perimeter
 G1 X96.608 Y62.330 E5.54970 ; perimeter
 G1 X96.262 Y62.190 F12000.000 ; move inwards before travel
 G1 X96.251 Y62.033 F12000.000 ; move to first perimeter point
 G1 X90.846 Y62.033 E5.71019 F7200.000 ; perimeter
 G1 X90.862 Y59.572 E5.78327 ; perimeter
 G1 X96.251 Y59.572 E5.94329 ; perimeter
 G1 X96.251 Y61.973 E6.01459 ; perimeter
 G1 X95.894 Y61.676 F12000.000 ; move to first perimeter point
 G1 X91.205 Y61.676 E6.15380 F7200.000 ; perimeter
 G1 X91.216 Y59.929 E6.20568 ; perimeter
 G1 X95.894 Y59.929 E6.34456 ; perimeter
 G1 X95.894 Y61.616 E6.39465 ; perimeter
 G1 X95.537 Y61.319 F12000.000 ; move to first perimeter point
 G1 X91.565 Y61.319 E6.51260 F7200.000 ; perimeter
 G1 X91.571 Y60.286 E6.54327 ; perimeter
 G1 X95.537 Y60.286 E6.66101 ; perimeter
 G1 X95.537 Y61.259 E6.68990 ; perimeter
 G1 X95.180 Y60.962 F12000.000 ; move to first perimeter point
 G1 X91.924 Y60.962 E6.78657 F7200.000 ; perimeter
 G1 X91.926 Y60.643 E6.79604 ; perimeter
 G1 X95.180 Y60.643 E6.89265 ; perimeter
 G1 X95.180 Y60.902 E6.90034 ; perimeter
 G1 F9600
 G1 X91.924 Y60.962 E6.12695 ; wipe and retract
 G1 F9600
 G1 X91.926 Y60.643 E6.05122 ; wipe and retract
 G1 F9600
 G1 X95.180 Y60.643 E5.27845 ; wipe and retract
 G1 F9600
 G1 X95.180 Y60.902 E5.21697 ; wipe and retract
 G1 E1.90034 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.000 F12000.000 ; lift Z
 G1 X96.608 Y69.215 F12000.000 ; move to first perimeter point
 G1 Z9.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.811 Y69.215 E5.06541 F7200.000 ; perimeter
 G1 X107.942 Y123.815 E6.70907 ; perimeter
 G1 X95.608 Y123.815 E7.07527 ; perimeter
 G1 X95.608 Y132.215 E7.32468 ; perimeter
 G1 X109.346 Y132.215 E7.73258 ; perimeter
 G1 X109.992 Y136.074 E7.84876 ; perimeter
 G1 X109.992 Y137.923 E7.90365 ; perimeter
 G1 X109.148 Y139.531 E7.95757 ; perimeter
 G1 X107.653 Y140.562 E8.01149 ; perimeter
 G1 X105.814 Y140.785 E8.06651 ; perimeter
 G1 X93.363 Y140.785 E8.43620 ; perimeter
 G1 X91.653 Y140.137 E8.49050 ; perimeter
 G1 X90.449 Y138.778 E8.54441 ; perimeter
 G1 X90.008 Y136.991 E8.59905 ; perimeter
 G1 X90.477 Y63.839 E10.77107 ; perimeter
 G1 X96.608 Y63.839 E10.95311 ; perimeter
 G1 X96.608 Y69.155 E11.11093 ; perimeter
 G1 X96.608 Y69.615 F12000.000 ; move inwards before travel
 G1 X96.251 Y69.572 F12000.000 ; move to first perimeter point
 G1 X98.509 Y69.572 E11.17797 F7200.000 ; perimeter
 G1 X107.520 Y123.458 E12.80012 ; perimeter
 G1 X95.251 Y123.458 E13.16441 ; perimeter
 G1 X95.251 Y132.572 E13.43502 ; perimeter
 G1 X98.451 Y132.572 E13.53003 ; perimeter
 G1 X98.451 Y136.372 E13.64286 ; perimeter
 G1 X105.165 Y136.372 E13.84221 ; perimeter
 G1 X105.165 Y132.572 E13.95504 ; perimeter
 G1 X109.044 Y132.572 E14.07021 ; perimeter
 G1 X109.635 Y136.104 E14.17653 ; perimeter
 G1 X109.635 Y137.835 E14.22793 ; perimeter
 G1 X108.873 Y139.287 E14.27662 ; perimeter
 G1 X107.523 Y140.218 E14.32531 ; perimeter
 G1 X105.792 Y140.428 E14.37707 ; perimeter
 G1 X93.428 Y140.428 E14.74418 ; perimeter
 G1 X91.862 Y139.834 E14.79392 ; perimeter
 G1 X90.774 Y138.607 E14.84261 ; perimeter
 G1 X90.366 Y136.949 E14.89332 ; perimeter
 G1 X90.832 Y64.196 E17.05348 ; perimeter
 G1 X96.251 Y64.196 E17.21438 ; perimeter
 G1 X96.251 Y69.512 E17.37220 ; perimeter
 G1 X95.894 Y69.929 F12000.000 ; move to first perimeter point
 G1 X98.206 Y69.929 E17.44086 F7200.000 ; perimeter
 G1 X107.098 Y123.100 E19.04152 ; perimeter
 G1 X94.894 Y123.100 E19.40388 ; perimeter
 G1 X94.894 Y132.929 E19.69570 ; perimeter
 G1 X98.094 Y132.929 E19.79071 ; perimeter
 G1 X98.094 Y136.729 E19.90354 ; perimeter
 G1 X105.522 Y136.729 E20.12409 ; perimeter
 G1 X105.522 Y132.929 E20.23692 ; perimeter
 G1 X108.742 Y132.929 E20.33251 ; perimeter
 G1 X109.278 Y136.133 E20.42898 ; perimeter
 G1 X109.278 Y137.747 E20.47688 ; perimeter
 G1 X108.597 Y139.043 E20.52035 ; perimeter
 G1 X107.393 Y139.874 E20.56381 ; perimeter
 G1 X105.771 Y140.071 E20.61232 ; perimeter
 G1 X93.493 Y140.071 E20.97685 ; perimeter
 G1 X92.071 Y139.532 E21.02203 ; perimeter
 G1 X91.100 Y138.436 E21.06549 ; perimeter
 G1 X90.723 Y136.906 E21.11226 ; perimeter
 G1 X91.187 Y64.553 E23.26057 ; perimeter
 G1 X95.894 Y64.553 E23.40033 ; perimeter
 G1 X95.894 Y69.869 E23.55816 ; perimeter
 G1 X91.819 Y69.943 F12000.000 ; move to first perimeter point
 G1 X91.536 Y118.153 E24.98958 F7200.000 ; perimeter
 G1 X91.886 Y119.700 E25.03669 ; perimeter
 G1 X92.975 Y121.041 E25.08798 ; perimeter
 G1 X94.490 Y121.668 E25.13668 ; perimeter
 G1 X101.702 Y121.668 E25.35079 ; perimeter
 G1 X103.161 Y121.475 E25.39450 ; perimeter
 G1 X104.541 Y120.436 E25.44580 ; perimeter
 G1 X105.290 Y118.879 E25.49710 ; perimeter
 G1 X105.290 Y117.343 E25.54269 ; perimeter
 G1 X102.350 Y98.162 E26.11886 ; perimeter
 G1 X102.560 Y98.128 E26.12518 ; perimeter
 G1 X106.677 Y122.743 E26.86617 ; perimeter
 G1 X94.537 Y122.743 E27.22662 ; perimeter
 G1 X94.537 Y133.286 E27.53964 ; perimeter
 G1 X97.737 Y133.286 E27.63465 ; perimeter
 G1 X97.737 Y137.086 E27.74748 ; perimeter
 G1 X105.879 Y137.086 E27.98924 ; perimeter
 G1 X105.879 Y133.286 E28.10206 ; perimeter
 G1 X108.440 Y133.286 E28.17808 ; perimeter
 G1 X108.921 Y136.163 E28.26469 ; perimeter
 G1 X108.921 Y137.659 E28.30910 ; perimeter
 G1 X108.322 Y138.799 E28.34733 ; perimeter
 G1 X107.262 Y139.530 E28.38557 ; perimeter
 G1 X105.749 Y139.714 E28.43083 ; perimeter
 G1 X93.559 Y139.714 E28.79277 ; perimeter
 G1 X92.280 Y139.229 E28.83340 ; perimeter
 G1 X91.426 Y138.265 E28.87163 ; perimeter
 G1 X91.080 Y136.864 E28.91447 ; perimeter
 G1 X91.542 Y64.910 E31.05092 ; perimeter
 G1 X95.537 Y64.910 E31.16954 ; perimeter
 G1 X95.537 Y69.943 E31.31898 ; perimeter
 G1 X91.879 Y69.943 E31.42758 ; perimeter
 G1 X91.869 Y69.586 F12000.000 ; move to first perimeter point
 G1 X91.896 Y65.267 E31.55581 F7200.000 ; perimeter
 G1 X95.180 Y65.267 E31.65330 ; perimeter
 G1 X95.180 Y69.586 E31.78154 ; perimeter
 G1 X91.929 Y69.586 E31.87806 ; perimeter
 G1 X92.228 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.251 Y65.624 E31.98510 F7200.000 ; perimeter
 G1 X94.823 Y65.624 E32.06145 ; perimeter
 G1 X94.823 Y69.229 E32.16848 ; perimeter
 G1 X92.288 Y69.229 E32.24373 ; perimeter
 G1 F9600
 G1 X92.251 Y65.624 E31.38757 ; wipe and retract
 G1 F9600
 G1 X94.823 Y65.624 E30.77683 ; wipe and retract
 G1 F9600
 G1 X94.823 Y69.229 E29.92071 ; wipe and retract
 G1 F9600
 G1 X92.288 Y69.229 E29.31873 ; wipe and retract
 G1 E27.24373 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.200 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z9.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X106.236 Y137.443 E5.80503 ; perimeter
 G1 X106.236 Y133.643 E5.91785 ; perimeter
 G1 X108.137 Y133.643 E5.97429 ; perimeter
 G1 X108.564 Y136.193 E6.05104 ; perimeter
 G1 X108.564 Y137.571 E6.09196 ; perimeter
 G1 X108.047 Y138.555 E6.12497 ; perimeter
 G1 X107.132 Y139.187 E6.15798 ; perimeter
 G1 X105.728 Y139.357 E6.19998 ; perimeter
 G1 X93.624 Y139.357 E6.55934 ; perimeter
 G1 X92.488 Y138.926 E6.59541 ; perimeter
 G1 X91.751 Y138.094 E6.62842 ; perimeter
 G1 X91.438 Y136.822 E6.66732 ; perimeter
 G1 X91.546 Y119.849 E7.17128 ; perimeter
 G1 X92.754 Y121.337 E7.22818 ; perimeter
 G1 X94.419 Y122.025 E7.28168 ; perimeter
 G1 X101.725 Y122.025 E7.49860 ; perimeter
 G1 X103.301 Y121.817 E7.54579 ; perimeter
 G1 X104.825 Y120.669 E7.60245 ; perimeter
 G1 X105.561 Y119.141 E7.65279 ; perimeter
 G1 X105.716 Y119.163 E7.65745 ; perimeter
 G1 X106.255 Y122.386 E7.75447 ; perimeter
 G1 X94.240 Y122.386 E8.11121 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E8.11579 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E8.16422 ; perimeter
 G1 X105.394 Y120.311 E8.18370 ; perimeter
 G1 X105.549 Y120.333 E8.18835 ; perimeter
 G1 X105.833 Y122.029 E8.23942 ; perimeter
 G1 X103.916 Y122.029 E8.29635 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E8.25304 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.86568 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E7.70986 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E7.67261 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E7.26411 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.80871 ; wipe and retract
 G1 E3.29635 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.200 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z9.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X106.593 Y137.800 E5.49201 ; perimeter
 G1 X106.593 Y134.000 E5.60483 ; perimeter
 G1 X107.835 Y134.000 E5.64169 ; perimeter
 G1 X108.207 Y136.222 E5.70859 ; perimeter
 G1 X108.207 Y137.482 E5.74601 ; perimeter
 G1 X107.772 Y138.311 E5.77380 ; perimeter
 G1 X107.001 Y138.843 E5.80158 ; perimeter
 G1 X105.706 Y139.000 E5.84033 ; perimeter
 G1 X93.690 Y139.000 E6.19710 ; perimeter
 G1 X92.697 Y138.624 E6.22862 ; perimeter
 G1 X92.077 Y137.923 E6.25640 ; perimeter
 G1 X91.795 Y136.780 E6.29137 ; perimeter
 G1 X91.897 Y120.847 E6.76443 ; perimeter
 G1 X92.534 Y121.632 E6.79444 ; perimeter
 G1 X93.823 Y122.165 E6.83584 ; perimeter
 G1 X93.823 Y133.940 E7.18545 ; perimeter
 G1 F9600
 G1 X97.023 Y134.000 E6.42532 ; wipe and retract
 G1 F9600
 G1 X97.023 Y137.800 E5.52282 ; wipe and retract
 G1 F9600
 G1 X106.593 Y137.800 E3.24976 ; wipe and retract
 G1 F9600
 G1 X106.593 Y134.371 E2.43545 ; wipe and retract
 G1 E2.18545 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.200 F12000.000 ; lift Z
 G1 X92.884 Y71.015 F12000.000 ; move to first perimeter point
 G1 Z9.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.105 Y71.015 E5.12531 F7200.000 ; perimeter
 G1 X104.219 Y117.425 E6.51939 ; perimeter
 G1 X104.219 Y118.635 E6.55531 ; perimeter
 G1 X103.689 Y119.737 E6.59162 ; perimeter
 G1 X102.742 Y120.450 E6.62683 ; perimeter
 G1 X101.631 Y120.597 E6.66009 ; perimeter
 G1 X94.703 Y120.597 E6.86579 ; perimeter
 G1 X93.635 Y120.155 E6.90011 ; perimeter
 G1 X92.875 Y119.220 E6.93589 ; perimeter
 G1 X92.608 Y118.036 E6.97191 ; perimeter
 G1 X92.884 Y71.075 E8.36629 ; perimeter
 G1 X92.885 Y70.615 F12000.000 ; move inwards before travel
 G1 X92.529 Y70.658 F12000.000 ; move to first perimeter point
 G1 X97.411 Y70.658 E8.51124 F7200.000 ; perimeter
 G1 X104.576 Y117.398 E9.91523 ; perimeter
 G1 X104.576 Y118.716 E9.95438 ; perimeter
 G1 X103.973 Y119.970 E9.99568 ; perimeter
 G1 X102.881 Y120.792 E10.03626 ; perimeter
 G1 X101.655 Y120.954 E10.07300 ; perimeter
 G1 X94.632 Y120.954 E10.28150 ; perimeter
 G1 X93.415 Y120.451 E10.32062 ; perimeter
 G1 X92.545 Y119.380 E10.36157 ; perimeter
 G1 X92.251 Y118.075 E10.40129 ; perimeter
 G1 X92.529 Y70.718 E11.80742 ; perimeter
 G1 X92.174 Y70.300 F12000.000 ; move to first perimeter point
 G1 X97.718 Y70.300 E11.97201 F7200.000 ; perimeter
 G1 X104.933 Y117.371 E13.38591 ; perimeter
 G1 X104.933 Y118.797 E13.42828 ; perimeter
 G1 X104.257 Y120.203 E13.47458 ; perimeter
 G1 X103.021 Y121.133 E13.52051 ; perimeter
 G1 X101.678 Y121.311 E13.56074 ; perimeter
 G1 X94.561 Y121.311 E13.77205 ; perimeter
 G1 X93.195 Y120.746 E13.81596 ; perimeter
 G1 X92.216 Y119.540 E13.86208 ; perimeter
 G1 X91.893 Y118.114 E13.90549 ; perimeter
 G1 X92.174 Y70.360 E15.32338 ; perimeter
 G1 F9600
 G1 X97.718 Y70.300 E14.00664 ; wipe and retract
 G1 F9600
 G1 X99.908 Y84.589 E10.57338 ; wipe and retract
 G1 E10.32338 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.200 F12000.000 ; lift Z
 G1 X98.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z9.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X104.808 Y133.015 E5.17815 F7200.000 ; perimeter
 G1 X104.808 Y136.015 E5.26722 ; perimeter
 G1 X98.808 Y136.015 E5.44537 ; perimeter
 G1 X98.808 Y133.075 E5.53266 ; perimeter
 G1 X98.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X104.987 Y132.615 E5.93285 F1800.000 ; infill
 G1 X107.260 Y134.201 F12000.000 ; move to first infill point
 G1 X107.260 Y138.384 E6.12703 F7200.000 ; infill
 G1 X106.701 Y138.675 E6.15627 ; infill
 G1 X106.701 Y138.001 E6.18755 ; infill
 G1 X106.143 Y138.001 E6.21347 ; infill
 G1 X106.143 Y138.743 E6.24790 ; infill
 G1 X105.585 Y138.779 E6.27388 ; infill
 G1 X105.585 Y138.001 E6.30996 ; infill
 G1 X105.026 Y138.001 E6.33588 ; infill
 G1 X105.026 Y138.779 E6.37197 ; infill
 G1 X104.468 Y138.779 E6.39789 ; infill
 G1 X104.468 Y138.001 E6.43398 ; infill
 G1 X103.909 Y138.001 E6.45990 ; infill
 G1 X103.909 Y138.779 E6.49599 ; infill
 G1 X103.351 Y138.779 E6.52191 ; infill
 G1 X103.351 Y138.001 E6.55800 ; infill
 G1 X102.793 Y138.001 E6.58392 ; infill
 G1 X102.793 Y138.779 E6.62001 ; infill
 G1 X102.234 Y138.779 E6.64593 ; infill
 G1 X102.234 Y138.001 E6.68202 ; infill
 G1 X101.676 Y138.001 E6.70794 ; infill
 G1 X101.676 Y138.779 E6.74403 ; infill
 G1 X101.118 Y138.779 E6.76995 ; infill
 G1 X101.118 Y138.001 E6.80604 ; infill
 G1 X100.559 Y138.001 E6.83196 ; infill
 G1 X100.559 Y138.779 E6.86805 ; infill
 G1 X100.001 Y138.779 E6.89397 ; infill
 G1 X100.001 Y138.001 E6.93006 ; infill
 G1 X99.443 Y138.001 E6.95598 ; infill
 G1 X99.443 Y138.779 E6.99206 ; infill
 G1 X98.884 Y138.779 E7.01799 ; infill
 G1 X98.884 Y138.001 E7.05407 ; infill
 G1 X98.326 Y138.001 E7.08000 ; infill
 G1 X98.326 Y138.779 E7.11608 ; infill
 G1 X97.767 Y138.779 E7.14201 ; infill
 G1 X97.767 Y138.001 E7.17809 ; infill
 G1 X97.209 Y138.001 E7.20402 ; infill
 G1 X97.209 Y138.779 E7.24010 ; infill
 G1 X96.651 Y138.779 E7.26603 ; infill
 G1 X96.651 Y134.201 E7.47854 ; infill
 G1 X96.092 Y134.201 E7.50446 ; infill
 G1 X96.092 Y138.779 E7.71697 ; infill
 G1 X95.534 Y138.779 E7.74290 ; infill
 G1 X95.534 Y134.201 E7.95541 ; infill
 G1 X94.976 Y134.201 E7.98133 ; infill
 G1 X94.976 Y138.779 E8.19385 ; infill
 G1 X94.417 Y138.779 E8.21977 ; infill
 G1 X94.417 Y134.201 E8.43228 ; infill
 G1 X93.859 Y134.201 E8.45821 ; infill
 G1 X93.859 Y138.779 E8.67072 ; infill
 G1 X93.301 Y138.625 E8.69760 ; infill
 G1 X93.301 Y122.181 E9.46110 ; infill
 G1 X92.742 Y121.950 E9.48915 ; infill
 G1 X92.742 Y138.286 E10.24760 ; infill
 G1 X92.184 Y136.984 F12000.000 ; move to first infill point
 G1 X92.184 Y133.450 E10.41171 F7200.000 ; infill
 G1 F9600
 G1 X92.184 Y136.984 E9.57220 ; wipe and retract
 G1 E5.41171 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.200 F12000.000 ; lift Z
 G1 X107.818 Y135.966 F12000.000 ; move to first infill point
 G1 Z9.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X107.818 Y137.597 E5.07572 F7200.000 ; infill
 G1 F9600
 G1 X107.818 Y135.966 E4.68840 ; wipe and retract
 G1 E0.07572 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.200 F12000.000 ; lift Z
 G1 X91.703 Y119.744 F12000.000 ; move to first infill point
 G1 Z9.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.491 Y119.308 E5.01440 F1800.000 ; infill
 G1 X91.388 Y118.357 E5.04280 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E4.81559 ; wipe and retract
 G1 F9600
 G1 X91.703 Y119.744 E4.70044 ; wipe and retract
 G1 E0.04280 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.200 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z9.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X104.774 Y121.808 F12000.000 ; move to first infill point
 G1 X104.774 Y121.449 E5.07163 F7200.000 ; infill
 G1 X105.374 Y121.352 E5.10194 ; infill
 G1 X105.374 Y121.808 E5.12466 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.930 E5.19070 F1800.000 ; infill
 G1 X105.579 Y117.930 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.20887 F1800.000 ; infill
 G1 X104.413 Y110.364 E5.41805 ; infill
 G1 X102.427 Y97.969 F12000.000 ; move to first infill point
 G1 X98.594 Y74.053 E6.94281 F1800.000 ; infill
 G1 X98.594 Y74.053 F12000.000 ; move to first infill point
 G1 X97.962 Y70.107 E7.06146 F1800.000 ; infill
 G1 X94.434 Y69.008 F12000.000 ; move to first infill point
 G1 X94.434 Y65.846 E7.22053 F7200.000 ; infill
 G1 X93.829 Y65.846 E7.25097 ; infill
 G1 X93.829 Y69.008 E7.41005 ; infill
 G1 X93.224 Y69.008 E7.44049 ; infill
 G1 X93.224 Y65.846 E7.59957 ; infill
 G1 X92.619 Y65.846 E7.63001 ; infill
 G1 X92.619 Y69.008 E7.78908 ; infill
 G1 F9600
 G1 X92.619 Y65.846 E7.03812 ; wipe and retract
 G1 F9600
 G1 X93.224 Y65.846 E6.89442 ; wipe and retract
 G1 F9600
 G1 X93.224 Y69.008 E6.14346 ; wipe and retract
 G1 F9600
 G1 X93.829 Y69.008 E5.99976 ; wipe and retract
 G1 F9600
 G1 X93.829 Y65.846 E5.24880 ; wipe and retract
 G1 F9600
 G1 X94.434 Y65.846 E5.10510 ; wipe and retract
 G1 F9600
 G1 X94.434 Y69.008 E4.35414 ; wipe and retract
 G1 E2.78908 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.200 F12000.000 ; lift Z
 G1 X96.608 Y62.190 F12000.000 ; move to first perimeter point
 G1 Z9.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X90.488 Y62.190 E5.18172 F7200.000 ; perimeter
 G1 X90.507 Y59.215 E5.27007 ; perimeter
 G1 X96.608 Y59.215 E5.45122 ; perimeter
 G1 X96.608 Y62.130 E5.53779 ; perimeter
 G1 X96.262 Y61.990 F12000.000 ; move inwards before travel
 G1 X96.251 Y61.833 F12000.000 ; move to first perimeter point
 G1 X90.847 Y61.833 E5.69824 F7200.000 ; perimeter
 G1 X90.862 Y59.572 E5.76538 ; perimeter
 G1 X96.251 Y59.572 E5.92540 ; perimeter
 G1 X96.251 Y61.773 E5.99076 ; perimeter
 G1 X95.894 Y61.476 F12000.000 ; move to first perimeter point
 G1 X91.206 Y61.476 E6.12994 F7200.000 ; perimeter
 G1 X91.216 Y59.929 E6.17588 ; perimeter
 G1 X95.894 Y59.929 E6.31476 ; perimeter
 G1 X95.894 Y61.416 E6.35891 ; perimeter
 G1 X95.537 Y61.119 F12000.000 ; move to first perimeter point
 G1 X91.566 Y61.119 E6.47682 F7200.000 ; perimeter
 G1 X91.571 Y60.286 E6.50155 ; perimeter
 G1 X95.537 Y60.286 E6.61930 ; perimeter
 G1 X95.537 Y61.059 E6.64225 ; perimeter
 G1 X95.358 Y60.702 F12000.000 ; move to first infill point
 G1 X91.747 Y60.702 E6.86958 F1800.000 ; infill
 G1 F9600
 G1 X95.358 Y60.702 E6.01191 ; wipe and retract
 G1 E1.86958 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.200 F12000.000 ; lift Z
 G1 X96.608 Y69.215 F12000.000 ; move to first perimeter point
 G1 Z9.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.811 Y69.215 E5.06541 F7200.000 ; perimeter
 G1 X107.942 Y123.815 E6.70907 ; perimeter
 G1 X95.608 Y123.815 E7.07527 ; perimeter
 G1 X95.608 Y132.215 E7.32468 ; perimeter
 G1 X109.346 Y132.215 E7.73258 ; perimeter
 G1 X109.992 Y136.074 E7.84876 ; perimeter
 G1 X109.992 Y137.923 E7.90365 ; perimeter
 G1 X109.148 Y139.531 E7.95757 ; perimeter
 G1 X107.653 Y140.562 E8.01149 ; perimeter
 G1 X105.814 Y140.785 E8.06651 ; perimeter
 G1 X93.363 Y140.785 E8.43620 ; perimeter
 G1 X91.653 Y140.137 E8.49050 ; perimeter
 G1 X90.449 Y138.778 E8.54441 ; perimeter
 G1 X90.008 Y136.991 E8.59905 ; perimeter
 G1 X90.477 Y63.911 E10.76894 ; perimeter
 G1 X96.608 Y63.911 E10.95099 ; perimeter
 G1 X96.608 Y69.155 E11.10668 ; perimeter
 G1 X96.608 Y69.615 F12000.000 ; move inwards before travel
 G1 X96.251 Y69.572 F12000.000 ; move to first perimeter point
 G1 X98.509 Y69.572 E11.17371 F7200.000 ; perimeter
 G1 X107.520 Y123.458 E12.79587 ; perimeter
 G1 X95.251 Y123.458 E13.16015 ; perimeter
 G1 X95.251 Y132.572 E13.43076 ; perimeter
 G1 X98.451 Y132.572 E13.52577 ; perimeter
 G1 X98.451 Y136.372 E13.63860 ; perimeter
 G1 X105.165 Y136.372 E13.83795 ; perimeter
 G1 X105.165 Y132.572 E13.95078 ; perimeter
 G1 X109.044 Y132.572 E14.06595 ; perimeter
 G1 X109.635 Y136.104 E14.17227 ; perimeter
 G1 X109.635 Y137.835 E14.22367 ; perimeter
 G1 X108.873 Y139.287 E14.27236 ; perimeter
 G1 X107.523 Y140.218 E14.32105 ; perimeter
 G1 X105.792 Y140.428 E14.37282 ; perimeter
 G1 X93.428 Y140.428 E14.73993 ; perimeter
 G1 X91.862 Y139.834 E14.78967 ; perimeter
 G1 X90.774 Y138.607 E14.83836 ; perimeter
 G1 X90.366 Y136.949 E14.88906 ; perimeter
 G1 X90.832 Y64.268 E17.04709 ; perimeter
 G1 X96.251 Y64.268 E17.20800 ; perimeter
 G1 X96.251 Y69.512 E17.36369 ; perimeter
 G1 X95.894 Y69.929 F12000.000 ; move to first perimeter point
 G1 X98.206 Y69.929 E17.43235 F7200.000 ; perimeter
 G1 X107.098 Y123.100 E19.03301 ; perimeter
 G1 X94.894 Y123.100 E19.39537 ; perimeter
 G1 X94.894 Y132.929 E19.68719 ; perimeter
 G1 X98.094 Y132.929 E19.78220 ; perimeter
 G1 X98.094 Y136.729 E19.89503 ; perimeter
 G1 X105.522 Y136.729 E20.11558 ; perimeter
 G1 X105.522 Y132.929 E20.22841 ; perimeter
 G1 X108.742 Y132.929 E20.32400 ; perimeter
 G1 X109.278 Y136.133 E20.42047 ; perimeter
 G1 X109.278 Y137.747 E20.46837 ; perimeter
 G1 X108.597 Y139.043 E20.51183 ; perimeter
 G1 X107.393 Y139.874 E20.55530 ; perimeter
 G1 X105.771 Y140.071 E20.60381 ; perimeter
 G1 X93.493 Y140.071 E20.96834 ; perimeter
 G1 X92.071 Y139.532 E21.01352 ; perimeter
 G1 X91.100 Y138.436 E21.05698 ; perimeter
 G1 X90.723 Y136.906 E21.10375 ; perimeter
 G1 X91.186 Y64.625 E23.24992 ; perimeter
 G1 X95.894 Y64.625 E23.38970 ; perimeter
 G1 X95.894 Y69.869 E23.54539 ; perimeter
 G1 X91.819 Y69.943 F12000.000 ; move to first perimeter point
 G1 X91.536 Y118.153 E24.97681 F7200.000 ; perimeter
 G1 X91.886 Y119.700 E25.02392 ; perimeter
 G1 X92.975 Y121.041 E25.07521 ; perimeter
 G1 X94.490 Y121.668 E25.12391 ; perimeter
 G1 X101.702 Y121.668 E25.33803 ; perimeter
 G1 X103.161 Y121.475 E25.38174 ; perimeter
 G1 X104.541 Y120.436 E25.43303 ; perimeter
 G1 X105.290 Y118.879 E25.48433 ; perimeter
 G1 X105.290 Y117.343 E25.52992 ; perimeter
 G1 X102.350 Y98.162 E26.10609 ; perimeter
 G1 X102.560 Y98.128 E26.11241 ; perimeter
 G1 X106.677 Y122.743 E26.85341 ; perimeter
 G1 X94.537 Y122.743 E27.21385 ; perimeter
 G1 X94.537 Y133.286 E27.52687 ; perimeter
 G1 X97.737 Y133.286 E27.62188 ; perimeter
 G1 X97.737 Y137.086 E27.73471 ; perimeter
 G1 X105.879 Y137.086 E27.97647 ; perimeter
 G1 X105.879 Y133.286 E28.08930 ; perimeter
 G1 X108.440 Y133.286 E28.16531 ; perimeter
 G1 X108.921 Y136.163 E28.25192 ; perimeter
 G1 X108.921 Y137.659 E28.29633 ; perimeter
 G1 X108.322 Y138.799 E28.33457 ; perimeter
 G1 X107.262 Y139.530 E28.37280 ; perimeter
 G1 X105.749 Y139.714 E28.41806 ; perimeter
 G1 X93.559 Y139.714 E28.78000 ; perimeter
 G1 X92.280 Y139.229 E28.82063 ; perimeter
 G1 X91.426 Y138.265 E28.85887 ; perimeter
 G1 X91.080 Y136.864 E28.90170 ; perimeter
 G1 X91.541 Y64.982 E31.03602 ; perimeter
 G1 X95.537 Y64.982 E31.15465 ; perimeter
 G1 X95.537 Y69.943 E31.30196 ; perimeter
 G1 X91.879 Y69.943 E31.41055 ; perimeter
 G1 X91.869 Y69.586 F12000.000 ; move to first perimeter point
 G1 X91.896 Y65.339 E31.53666 F7200.000 ; perimeter
 G1 X95.180 Y65.339 E31.63416 ; perimeter
 G1 X95.180 Y69.586 E31.76026 ; perimeter
 G1 X91.929 Y69.586 E31.85679 ; perimeter
 G1 X92.228 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.251 Y65.696 E31.96168 F7200.000 ; perimeter
 G1 X94.823 Y65.696 E32.03805 ; perimeter
 G1 X94.823 Y69.229 E32.14294 ; perimeter
 G1 X92.288 Y69.229 E32.21820 ; perimeter
 G1 F9600
 G1 X92.251 Y65.696 E31.37911 ; wipe and retract
 G1 F9600
 G1 X94.823 Y65.696 E30.76826 ; wipe and retract
 G1 F9600
 G1 X94.823 Y69.229 E29.92921 ; wipe and retract
 G1 F9600
 G1 X92.288 Y69.229 E29.32723 ; wipe and retract
 G1 E27.21820 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.400 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z9.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X106.236 Y137.443 E5.80503 ; perimeter
 G1 X106.236 Y133.643 E5.91785 ; perimeter
 G1 X108.137 Y133.643 E5.97429 ; perimeter
 G1 X108.564 Y136.193 E6.05104 ; perimeter
 G1 X108.564 Y137.571 E6.09196 ; perimeter
 G1 X108.047 Y138.555 E6.12497 ; perimeter
 G1 X107.132 Y139.187 E6.15798 ; perimeter
 G1 X105.728 Y139.357 E6.19998 ; perimeter
 G1 X93.624 Y139.357 E6.55934 ; perimeter
 G1 X92.488 Y138.926 E6.59541 ; perimeter
 G1 X91.751 Y138.094 E6.62842 ; perimeter
 G1 X91.438 Y136.822 E6.66732 ; perimeter
 G1 X91.546 Y119.849 E7.17128 ; perimeter
 G1 X92.754 Y121.337 E7.22818 ; perimeter
 G1 X94.419 Y122.025 E7.28168 ; perimeter
 G1 X101.725 Y122.025 E7.49860 ; perimeter
 G1 X103.301 Y121.817 E7.54579 ; perimeter
 G1 X104.825 Y120.669 E7.60245 ; perimeter
 G1 X105.561 Y119.141 E7.65279 ; perimeter
 G1 X105.716 Y119.163 E7.65745 ; perimeter
 G1 X106.255 Y122.386 E7.75447 ; perimeter
 G1 X94.240 Y122.386 E8.11121 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E8.11579 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E8.16422 ; perimeter
 G1 X105.394 Y120.311 E8.18370 ; perimeter
 G1 X105.549 Y120.333 E8.18835 ; perimeter
 G1 X105.833 Y122.029 E8.23942 ; perimeter
 G1 X103.916 Y122.029 E8.29635 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E8.25304 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.86568 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E7.70986 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E7.67261 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E7.26411 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.80871 ; wipe and retract
 G1 E3.29635 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.400 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z9.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X106.593 Y137.800 E5.49201 ; perimeter
 G1 X106.593 Y134.000 E5.60483 ; perimeter
 G1 X107.835 Y134.000 E5.64169 ; perimeter
 G1 X108.207 Y136.222 E5.70859 ; perimeter
 G1 X108.207 Y137.482 E5.74601 ; perimeter
 G1 X107.772 Y138.311 E5.77380 ; perimeter
 G1 X107.001 Y138.843 E5.80158 ; perimeter
 G1 X105.706 Y139.000 E5.84033 ; perimeter
 G1 X93.690 Y139.000 E6.19710 ; perimeter
 G1 X92.697 Y138.624 E6.22862 ; perimeter
 G1 X92.077 Y137.923 E6.25640 ; perimeter
 G1 X91.795 Y136.780 E6.29137 ; perimeter
 G1 X91.897 Y120.847 E6.76443 ; perimeter
 G1 X92.534 Y121.632 E6.79444 ; perimeter
 G1 X93.823 Y122.165 E6.83584 ; perimeter
 G1 X93.823 Y133.940 E7.18545 ; perimeter
 G1 F9600
 G1 X97.023 Y134.000 E6.42532 ; wipe and retract
 G1 F9600
 G1 X97.023 Y137.800 E5.52282 ; wipe and retract
 G1 F9600
 G1 X106.593 Y137.800 E3.24976 ; wipe and retract
 G1 F9600
 G1 X106.593 Y134.371 E2.43545 ; wipe and retract
 G1 E2.18545 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.400 F12000.000 ; lift Z
 G1 X92.884 Y71.015 F12000.000 ; move to first perimeter point
 G1 Z9.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.105 Y71.015 E5.12531 F7200.000 ; perimeter
 G1 X104.219 Y117.425 E6.51939 ; perimeter
 G1 X104.219 Y118.635 E6.55531 ; perimeter
 G1 X103.689 Y119.737 E6.59162 ; perimeter
 G1 X102.742 Y120.450 E6.62683 ; perimeter
 G1 X101.631 Y120.597 E6.66009 ; perimeter
 G1 X94.703 Y120.597 E6.86579 ; perimeter
 G1 X93.635 Y120.155 E6.90011 ; perimeter
 G1 X92.875 Y119.220 E6.93589 ; perimeter
 G1 X92.608 Y118.036 E6.97191 ; perimeter
 G1 X92.884 Y71.075 E8.36629 ; perimeter
 G1 X92.885 Y70.615 F12000.000 ; move inwards before travel
 G1 X92.529 Y70.658 F12000.000 ; move to first perimeter point
 G1 X97.411 Y70.658 E8.51124 F7200.000 ; perimeter
 G1 X104.576 Y117.398 E9.91523 ; perimeter
 G1 X104.576 Y118.716 E9.95438 ; perimeter
 G1 X103.973 Y119.970 E9.99568 ; perimeter
 G1 X102.881 Y120.792 E10.03626 ; perimeter
 G1 X101.655 Y120.954 E10.07300 ; perimeter
 G1 X94.632 Y120.954 E10.28150 ; perimeter
 G1 X93.415 Y120.451 E10.32062 ; perimeter
 G1 X92.545 Y119.380 E10.36157 ; perimeter
 G1 X92.251 Y118.075 E10.40129 ; perimeter
 G1 X92.529 Y70.718 E11.80742 ; perimeter
 G1 X92.174 Y70.300 F12000.000 ; move to first perimeter point
 G1 X97.718 Y70.300 E11.97201 F7200.000 ; perimeter
 G1 X104.933 Y117.371 E13.38591 ; perimeter
 G1 X104.933 Y118.797 E13.42828 ; perimeter
 G1 X104.257 Y120.203 E13.47458 ; perimeter
 G1 X103.021 Y121.133 E13.52051 ; perimeter
 G1 X101.678 Y121.311 E13.56074 ; perimeter
 G1 X94.561 Y121.311 E13.77205 ; perimeter
 G1 X93.195 Y120.746 E13.81596 ; perimeter
 G1 X92.216 Y119.540 E13.86208 ; perimeter
 G1 X91.893 Y118.114 E13.90549 ; perimeter
 G1 X92.174 Y70.360 E15.32338 ; perimeter
 G1 F9600
 G1 X97.718 Y70.300 E14.00664 ; wipe and retract
 G1 F9600
 G1 X99.908 Y84.589 E10.57338 ; wipe and retract
 G1 E10.32338 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.400 F12000.000 ; lift Z
 G1 X98.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z9.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X104.808 Y133.015 E5.17815 F7200.000 ; perimeter
 G1 X104.808 Y136.015 E5.26722 ; perimeter
 G1 X98.808 Y136.015 E5.44537 ; perimeter
 G1 X98.808 Y133.075 E5.53266 ; perimeter
 G1 X98.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X104.987 Y132.615 E5.93285 F1800.000 ; infill
 G1 X107.726 Y134.586 F12000.000 ; move to first infill point
 G1 X106.795 Y134.586 E5.97739 F7200.000 ; infill
 G1 X106.795 Y135.161 E6.00489 ; infill
 G1 X107.823 Y135.161 E6.05403 ; infill
 G1 X107.919 Y135.736 E6.08192 ; infill
 G1 X106.795 Y135.736 E6.13566 ; infill
 G1 X106.795 Y136.311 E6.16316 ; infill
 G1 X107.985 Y136.311 E6.22008 ; infill
 G1 X107.985 Y136.886 E6.24758 ; infill
 G1 X106.795 Y136.886 E6.30450 ; infill
 G1 X106.795 Y137.461 E6.33200 ; infill
 G1 X107.969 Y137.461 E6.38812 ; infill
 G1 X107.667 Y138.036 E6.41918 ; infill
 G1 X106.795 Y138.036 E6.46087 ; infill
 G1 X106.015 Y138.612 E6.50720 ; infill
 G1 X93.538 Y138.612 E7.10389 ; infill
 G1 X96.821 Y138.036 F12000.000 ; move to first infill point
 G1 X92.502 Y138.036 E7.31042 F7200.000 ; infill
 G1 X92.175 Y137.461 E7.34205 ; infill
 G1 X96.821 Y137.461 E7.56422 ; infill
 G1 X96.821 Y136.886 E7.59172 ; infill
 G1 X92.034 Y136.886 E7.82067 ; infill
 G1 X92.017 Y136.311 E7.84818 ; infill
 G1 X96.821 Y136.311 E8.07794 ; infill
 G1 X96.821 Y135.736 E8.10544 ; infill
 G1 X92.017 Y135.736 E8.33519 ; infill
 G1 X92.017 Y135.161 E8.36270 ; infill
 G1 X96.821 Y135.161 E8.59245 ; infill
 G1 X96.821 Y134.586 E8.61995 ; infill
 G1 X92.017 Y134.586 E8.84971 ; infill
 G1 X93.621 Y134.011 F12000.000 ; move to first infill point
 G1 X92.017 Y134.011 E8.92644 F7200.000 ; infill
 G1 X92.018 Y133.436 E8.95394 ; infill
 G1 X93.621 Y133.436 E9.03062 ; infill
 G1 X93.621 Y132.860 E9.05812 ; infill
 G1 X92.022 Y132.860 E9.13462 ; infill
 G1 X92.025 Y132.285 E9.16212 ; infill
 G1 X93.621 Y132.285 E9.23845 ; infill
 G1 X93.621 Y131.710 E9.26595 ; infill
 G1 X92.029 Y131.710 E9.34210 ; infill
 G1 X92.033 Y131.135 E9.36960 ; infill
 G1 X93.621 Y131.135 E9.44557 ; infill
 G1 X93.621 Y130.560 E9.47307 ; infill
 G1 X92.036 Y130.560 E9.54887 ; infill
 G1 X92.040 Y129.985 E9.57637 ; infill
 G1 X93.621 Y129.985 E9.65199 ; infill
 G1 X93.621 Y129.410 E9.67949 ; infill
 G1 X92.044 Y129.410 E9.75493 ; infill
 G1 X92.047 Y128.835 E9.78243 ; infill
 G1 X93.621 Y128.835 E9.85770 ; infill
 G1 X93.621 Y128.260 E9.88520 ; infill
 G1 X92.051 Y128.260 E9.96029 ; infill
 G1 X92.055 Y127.685 E9.98780 ; infill
 G1 X93.621 Y127.685 E10.06271 ; infill
 G1 X93.621 Y127.109 E10.09021 ; infill
 G1 X92.058 Y127.109 E10.16495 ; infill
 G1 X92.062 Y126.534 E10.19245 ; infill
 G1 X93.621 Y126.534 E10.26701 ; infill
 G1 X93.621 Y125.959 E10.29451 ; infill
 G1 X92.066 Y125.959 E10.36890 ; infill
 G1 X92.069 Y125.384 E10.39640 ; infill
 G1 X93.621 Y125.384 E10.47061 ; infill
 G1 X93.621 Y124.809 E10.49811 ; infill
 G1 X92.073 Y124.809 E10.57214 ; infill
 G1 X92.077 Y124.234 E10.59965 ; infill
 G1 X93.621 Y124.234 E10.67350 ; infill
 G1 X93.621 Y123.659 E10.70100 ; infill
 G1 X92.081 Y123.659 E10.77468 ; infill
 G1 X92.084 Y123.084 E10.80219 ; infill
 G1 X93.621 Y123.084 E10.87569 ; infill
 G1 X93.621 Y122.509 E10.90319 ; infill
 G1 X92.088 Y122.509 E10.97652 ; infill
 G1 X92.092 Y121.934 E11.00402 ; infill
 G1 X92.472 Y121.934 E11.02219 ; infill
 G1 X91.703 Y119.744 F12000.000 ; move to first infill point
 G1 X91.491 Y119.308 E11.03659 F1800.000 ; infill
 G1 X91.388 Y118.357 E11.06499 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E10.83778 ; wipe and retract
 G1 F9600
 G1 X91.703 Y119.744 E10.72263 ; wipe and retract
 G1 E6.06499 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.400 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z9.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X105.107 Y121.240 F12000.000 ; move to first infill point
 G1 X105.494 Y121.240 E5.07167 F7200.000 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.930 E5.13770 F1800.000 ; infill
 G1 X105.579 Y117.930 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.15587 F1800.000 ; infill
 G1 X104.413 Y110.364 E5.36505 ; infill
 G1 X102.427 Y97.969 F12000.000 ; move to first infill point
 G1 X98.594 Y74.053 E6.88982 F1800.000 ; infill
 G1 X98.594 Y74.053 F12000.000 ; move to first infill point
 G1 X97.962 Y70.107 E7.00846 F1800.000 ; infill
 G1 F9600
 G1 X98.594 Y74.053 E6.05946 ; wipe and retract
 G1 E2.00846 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.400 F12000.000 ; lift Z
 G1 X94.601 Y66.085 F12000.000 ; move to first infill point
 G1 Z9.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X92.452 Y66.085 E5.12313 F7200.000 ; infill
 G1 X92.452 Y66.774 E5.16260 ; infill
 G1 X94.601 Y66.774 E5.28573 ; infill
 G1 X94.601 Y67.463 E5.32520 ; infill
 G1 X92.452 Y67.463 E5.44833 ; infill
 G1 X92.452 Y68.152 E5.48779 ; infill
 G1 X94.601 Y68.152 E5.61093 ; infill
 G1 X94.601 Y68.841 E5.65039 ; infill
 G1 X92.452 Y68.841 E5.77352 ; infill
 G1 F9600
 G1 X94.601 Y68.841 E5.26304 ; wipe and retract
 G1 F9600
 G1 X94.601 Y68.152 E5.09942 ; wipe and retract
 G1 F9600
 G1 X92.452 Y68.152 E4.58894 ; wipe and retract
 G1 F9600
 G1 X92.452 Y67.463 E4.42531 ; wipe and retract
 G1 F9600
 G1 X94.601 Y67.463 E3.91484 ; wipe and retract
 G1 F9600
 G1 X94.601 Y66.774 E3.75121 ; wipe and retract
 G1 F9600
 G1 X92.452 Y66.774 E3.24073 ; wipe and retract
 G1 F9600
 G1 X92.452 Y66.085 E3.07711 ; wipe and retract
 G1 F9600
 G1 X94.601 Y66.085 E2.56663 ; wipe and retract
 G1 E0.77352 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.400 F12000.000 ; lift Z
 G1 X96.608 Y62.118 F12000.000 ; move to first perimeter point
 G1 Z9.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X90.488 Y62.118 E5.18171 F7200.000 ; perimeter
 G1 X90.507 Y59.215 E5.26792 ; perimeter
 G1 X96.608 Y59.215 E5.44908 ; perimeter
 G1 X96.608 Y62.058 E5.53351 ; perimeter
 G1 X96.262 Y61.918 F12000.000 ; move inwards before travel
 G1 X96.251 Y61.761 F12000.000 ; move to first perimeter point
 G1 X90.848 Y61.761 E5.69394 F7200.000 ; perimeter
 G1 X90.862 Y59.572 E5.75895 ; perimeter
 G1 X96.251 Y59.572 E5.91897 ; perimeter
 G1 X96.251 Y61.701 E5.98219 ; perimeter
 G1 X95.894 Y61.404 F12000.000 ; move to first perimeter point
 G1 X91.207 Y61.404 E6.12136 F7200.000 ; perimeter
 G1 X91.216 Y59.929 E6.16516 ; perimeter
 G1 X95.894 Y59.929 E6.30404 ; perimeter
 G1 X95.894 Y61.344 E6.34606 ; perimeter
 G1 X95.537 Y61.047 F12000.000 ; move to first perimeter point
 G1 X91.566 Y61.047 E6.46395 F7200.000 ; perimeter
 G1 X91.571 Y60.286 E6.48655 ; perimeter
 G1 X95.537 Y60.286 E6.60430 ; perimeter
 G1 X95.537 Y60.987 E6.62512 ; perimeter
 G1 X95.358 Y60.666 F12000.000 ; move to first infill point
 G1 X91.747 Y60.666 E6.85243 F1800.000 ; infill
 G1 F9600
 G1 X95.358 Y60.666 E5.99482 ; wipe and retract
 G1 E1.85243 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.400 F12000.000 ; lift Z
 G1 X96.608 Y69.215 F12000.000 ; move to first perimeter point
 G1 Z9.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.811 Y69.215 E5.06541 F7200.000 ; perimeter
 G1 X107.942 Y123.815 E6.70907 ; perimeter
 G1 X95.608 Y123.815 E7.07527 ; perimeter
 G1 X95.608 Y132.215 E7.32468 ; perimeter
 G1 X109.346 Y132.215 E7.73258 ; perimeter
 G1 X109.992 Y136.074 E7.84876 ; perimeter
 G1 X109.992 Y137.923 E7.90365 ; perimeter
 G1 X109.148 Y139.531 E7.95757 ; perimeter
 G1 X107.653 Y140.562 E8.01149 ; perimeter
 G1 X105.814 Y140.785 E8.06651 ; perimeter
 G1 X93.363 Y140.785 E8.43620 ; perimeter
 G1 X91.653 Y140.137 E8.49050 ; perimeter
 G1 X90.449 Y138.778 E8.54441 ; perimeter
 G1 X90.008 Y136.991 E8.59905 ; perimeter
 G1 X90.476 Y63.965 E10.76735 ; perimeter
 G1 X96.608 Y63.965 E10.94940 ; perimeter
 G1 X96.608 Y69.155 E11.10350 ; perimeter
 G1 X96.608 Y69.615 F12000.000 ; move inwards before travel
 G1 X96.251 Y69.572 F12000.000 ; move to first perimeter point
 G1 X98.509 Y69.572 E11.17054 F7200.000 ; perimeter
 G1 X107.520 Y123.458 E12.79269 ; perimeter
 G1 X95.251 Y123.458 E13.15698 ; perimeter
 G1 X95.251 Y132.572 E13.42759 ; perimeter
 G1 X98.451 Y132.572 E13.52260 ; perimeter
 G1 X98.451 Y136.372 E13.63543 ; perimeter
 G1 X105.165 Y136.372 E13.83478 ; perimeter
 G1 X105.165 Y132.572 E13.94761 ; perimeter
 G1 X109.044 Y132.572 E14.06278 ; perimeter
 G1 X109.635 Y136.104 E14.16910 ; perimeter
 G1 X109.635 Y137.835 E14.22050 ; perimeter
 G1 X108.873 Y139.287 E14.26919 ; perimeter
 G1 X107.523 Y140.218 E14.31788 ; perimeter
 G1 X105.792 Y140.428 E14.36964 ; perimeter
 G1 X93.428 Y140.428 E14.73676 ; perimeter
 G1 X91.862 Y139.834 E14.78649 ; perimeter
 G1 X90.774 Y138.607 E14.83518 ; perimeter
 G1 X90.366 Y136.949 E14.88589 ; perimeter
 G1 X90.831 Y64.322 E17.04232 ; perimeter
 G1 X96.251 Y64.322 E17.20325 ; perimeter
 G1 X96.251 Y69.512 E17.35734 ; perimeter
 G1 X95.894 Y69.929 F12000.000 ; move to first perimeter point
 G1 X98.206 Y69.929 E17.42600 F7200.000 ; perimeter
 G1 X107.098 Y123.100 E19.02666 ; perimeter
 G1 X94.894 Y123.100 E19.38903 ; perimeter
 G1 X94.894 Y132.929 E19.68084 ; perimeter
 G1 X98.094 Y132.929 E19.77585 ; perimeter
 G1 X98.094 Y136.729 E19.88868 ; perimeter
 G1 X105.522 Y136.729 E20.10924 ; perimeter
 G1 X105.522 Y132.929 E20.22206 ; perimeter
 G1 X108.742 Y132.929 E20.31766 ; perimeter
 G1 X109.278 Y136.133 E20.41412 ; perimeter
 G1 X109.278 Y137.747 E20.46202 ; perimeter
 G1 X108.597 Y139.043 E20.50549 ; perimeter
 G1 X107.393 Y139.874 E20.54895 ; perimeter
 G1 X105.771 Y140.071 E20.59746 ; perimeter
 G1 X93.493 Y140.071 E20.96199 ; perimeter
 G1 X92.071 Y139.532 E21.00717 ; perimeter
 G1 X91.100 Y138.436 E21.05064 ; perimeter
 G1 X90.723 Y136.906 E21.09741 ; perimeter
 G1 X91.186 Y64.679 E23.24199 ; perimeter
 G1 X95.894 Y64.679 E23.38177 ; perimeter
 G1 X95.894 Y69.869 E23.53587 ; perimeter
 G1 X91.819 Y69.943 F12000.000 ; move to first perimeter point
 G1 X91.536 Y118.153 E24.96729 F7200.000 ; perimeter
 G1 X91.886 Y119.700 E25.01440 ; perimeter
 G1 X92.975 Y121.041 E25.06569 ; perimeter
 G1 X94.490 Y121.668 E25.11439 ; perimeter
 G1 X101.702 Y121.668 E25.32851 ; perimeter
 G1 X103.161 Y121.475 E25.37222 ; perimeter
 G1 X104.541 Y120.436 E25.42352 ; perimeter
 G1 X105.290 Y118.879 E25.47481 ; perimeter
 G1 X105.290 Y117.343 E25.52041 ; perimeter
 G1 X102.350 Y98.162 E26.09657 ; perimeter
 G1 X102.560 Y98.128 E26.10289 ; perimeter
 G1 X106.677 Y122.743 E26.84389 ; perimeter
 G1 X94.537 Y122.743 E27.20433 ; perimeter
 G1 X94.537 Y133.286 E27.51735 ; perimeter
 G1 X97.737 Y133.286 E27.61236 ; perimeter
 G1 X97.737 Y137.086 E27.72519 ; perimeter
 G1 X105.879 Y137.086 E27.96695 ; perimeter
 G1 X105.879 Y133.286 E28.07978 ; perimeter
 G1 X108.440 Y133.286 E28.15579 ; perimeter
 G1 X108.921 Y136.163 E28.24240 ; perimeter
 G1 X108.921 Y137.659 E28.28681 ; perimeter
 G1 X108.322 Y138.799 E28.32505 ; perimeter
 G1 X107.262 Y139.530 E28.36329 ; perimeter
 G1 X105.749 Y139.714 E28.40854 ; perimeter
 G1 X93.559 Y139.714 E28.77049 ; perimeter
 G1 X92.280 Y139.229 E28.81111 ; perimeter
 G1 X91.426 Y138.265 E28.84935 ; perimeter
 G1 X91.080 Y136.864 E28.89218 ; perimeter
 G1 X91.541 Y65.036 E31.02491 ; perimeter
 G1 X95.537 Y65.036 E31.14356 ; perimeter
 G1 X95.537 Y69.943 E31.28927 ; perimeter
 G1 X91.879 Y69.943 E31.39786 ; perimeter
 G1 X91.869 Y69.586 F12000.000 ; move to first perimeter point
 G1 X91.896 Y65.393 E31.52237 F7200.000 ; perimeter
 G1 X95.180 Y65.393 E31.61989 ; perimeter
 G1 X95.180 Y69.586 E31.74439 ; perimeter
 G1 X91.929 Y69.586 E31.84092 ; perimeter
 G1 X92.228 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.250 Y65.750 E31.94423 F7200.000 ; perimeter
 G1 X94.823 Y65.750 E32.02060 ; perimeter
 G1 X94.823 Y69.229 E32.12391 ; perimeter
 G1 X92.288 Y69.229 E32.19916 ; perimeter
 G1 F9600
 G1 X92.250 Y65.750 E31.37280 ; wipe and retract
 G1 F9600
 G1 X94.823 Y65.750 E30.76187 ; wipe and retract
 G1 F9600
 G1 X94.823 Y69.229 E29.93555 ; wipe and retract
 G1 F9600
 G1 X92.288 Y69.229 E29.33358 ; wipe and retract
 G1 E27.19916 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.600 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z9.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X106.236 Y137.443 E5.80503 ; perimeter
 G1 X106.236 Y133.643 E5.91785 ; perimeter
 G1 X108.137 Y133.643 E5.97429 ; perimeter
 G1 X108.564 Y136.193 E6.05104 ; perimeter
 G1 X108.564 Y137.571 E6.09196 ; perimeter
 G1 X108.047 Y138.555 E6.12497 ; perimeter
 G1 X107.132 Y139.187 E6.15798 ; perimeter
 G1 X105.728 Y139.357 E6.19998 ; perimeter
 G1 X93.624 Y139.357 E6.55934 ; perimeter
 G1 X92.488 Y138.926 E6.59541 ; perimeter
 G1 X91.751 Y138.094 E6.62842 ; perimeter
 G1 X91.438 Y136.822 E6.66732 ; perimeter
 G1 X91.546 Y119.849 E7.17128 ; perimeter
 G1 X92.754 Y121.337 E7.22818 ; perimeter
 G1 X94.419 Y122.025 E7.28168 ; perimeter
 G1 X101.725 Y122.025 E7.49860 ; perimeter
 G1 X103.301 Y121.817 E7.54579 ; perimeter
 G1 X104.825 Y120.669 E7.60245 ; perimeter
 G1 X105.561 Y119.141 E7.65279 ; perimeter
 G1 X105.716 Y119.163 E7.65745 ; perimeter
 G1 X106.255 Y122.386 E7.75447 ; perimeter
 G1 X94.240 Y122.386 E8.11121 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E8.11579 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E8.16422 ; perimeter
 G1 X105.394 Y120.311 E8.18370 ; perimeter
 G1 X105.549 Y120.333 E8.18835 ; perimeter
 G1 X105.833 Y122.029 E8.23942 ; perimeter
 G1 X103.916 Y122.029 E8.29635 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E8.25304 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.86568 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E7.70986 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E7.67261 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E7.26411 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.80871 ; wipe and retract
 G1 E3.29635 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.600 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z9.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X106.593 Y137.800 E5.49201 ; perimeter
 G1 X106.593 Y134.000 E5.60483 ; perimeter
 G1 X107.835 Y134.000 E5.64169 ; perimeter
 G1 X108.207 Y136.222 E5.70859 ; perimeter
 G1 X108.207 Y137.482 E5.74601 ; perimeter
 G1 X107.772 Y138.311 E5.77380 ; perimeter
 G1 X107.001 Y138.843 E5.80158 ; perimeter
 G1 X105.706 Y139.000 E5.84033 ; perimeter
 G1 X93.690 Y139.000 E6.19710 ; perimeter
 G1 X92.697 Y138.624 E6.22862 ; perimeter
 G1 X92.077 Y137.923 E6.25640 ; perimeter
 G1 X91.795 Y136.780 E6.29137 ; perimeter
 G1 X91.897 Y120.847 E6.76443 ; perimeter
 G1 X92.534 Y121.632 E6.79444 ; perimeter
 G1 X93.823 Y122.165 E6.83584 ; perimeter
 G1 X93.823 Y133.940 E7.18545 ; perimeter
 G1 F9600
 G1 X97.023 Y134.000 E6.42532 ; wipe and retract
 G1 F9600
 G1 X97.023 Y137.800 E5.52282 ; wipe and retract
 G1 F9600
 G1 X106.593 Y137.800 E3.24976 ; wipe and retract
 G1 F9600
 G1 X106.593 Y134.371 E2.43545 ; wipe and retract
 G1 E2.18545 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.600 F12000.000 ; lift Z
 G1 X92.884 Y71.015 F12000.000 ; move to first perimeter point
 G1 Z9.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.105 Y71.015 E5.12531 F7200.000 ; perimeter
 G1 X104.219 Y117.425 E6.51939 ; perimeter
 G1 X104.219 Y118.635 E6.55531 ; perimeter
 G1 X103.689 Y119.737 E6.59162 ; perimeter
 G1 X102.742 Y120.450 E6.62683 ; perimeter
 G1 X101.631 Y120.597 E6.66009 ; perimeter
 G1 X94.703 Y120.597 E6.86579 ; perimeter
 G1 X93.635 Y120.155 E6.90011 ; perimeter
 G1 X92.875 Y119.220 E6.93589 ; perimeter
 G1 X92.608 Y118.036 E6.97191 ; perimeter
 G1 X92.884 Y71.075 E8.36629 ; perimeter
 G1 X92.885 Y70.615 F12000.000 ; move inwards before travel
 G1 X92.529 Y70.658 F12000.000 ; move to first perimeter point
 G1 X97.411 Y70.658 E8.51124 F7200.000 ; perimeter
 G1 X104.576 Y117.398 E9.91523 ; perimeter
 G1 X104.576 Y118.716 E9.95438 ; perimeter
 G1 X103.973 Y119.970 E9.99568 ; perimeter
 G1 X102.881 Y120.792 E10.03626 ; perimeter
 G1 X101.655 Y120.954 E10.07300 ; perimeter
 G1 X94.632 Y120.954 E10.28150 ; perimeter
 G1 X93.415 Y120.451 E10.32062 ; perimeter
 G1 X92.545 Y119.380 E10.36157 ; perimeter
 G1 X92.251 Y118.075 E10.40129 ; perimeter
 G1 X92.529 Y70.718 E11.80742 ; perimeter
 G1 X92.174 Y70.300 F12000.000 ; move to first perimeter point
 G1 X97.718 Y70.300 E11.97201 F7200.000 ; perimeter
 G1 X104.933 Y117.371 E13.38591 ; perimeter
 G1 X104.933 Y118.797 E13.42828 ; perimeter
 G1 X104.257 Y120.203 E13.47458 ; perimeter
 G1 X103.021 Y121.133 E13.52051 ; perimeter
 G1 X101.678 Y121.311 E13.56074 ; perimeter
 G1 X94.561 Y121.311 E13.77205 ; perimeter
 G1 X93.195 Y120.746 E13.81596 ; perimeter
 G1 X92.216 Y119.540 E13.86208 ; perimeter
 G1 X91.893 Y118.114 E13.90549 ; perimeter
 G1 X92.174 Y70.360 E15.32338 ; perimeter
 G1 F9600
 G1 X97.718 Y70.300 E14.00664 ; wipe and retract
 G1 F9600
 G1 X99.908 Y84.589 E10.57338 ; wipe and retract
 G1 E10.32338 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.600 F12000.000 ; lift Z
 G1 X98.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z9.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X104.808 Y133.015 E5.17815 F7200.000 ; perimeter
 G1 X104.808 Y136.015 E5.26722 ; perimeter
 G1 X98.808 Y136.015 E5.44537 ; perimeter
 G1 X98.808 Y133.075 E5.53266 ; perimeter
 G1 X98.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X104.987 Y132.615 E5.93285 F1800.000 ; infill
 G1 X107.260 Y134.201 F12000.000 ; move to first infill point
 G1 X107.260 Y138.384 E6.12703 F7200.000 ; infill
 G1 X106.701 Y138.675 E6.15627 ; infill
 G1 X106.701 Y138.001 E6.18755 ; infill
 G1 X106.143 Y138.001 E6.21347 ; infill
 G1 X106.143 Y138.743 E6.24790 ; infill
 G1 X105.585 Y138.779 E6.27388 ; infill
 G1 X105.585 Y138.001 E6.30996 ; infill
 G1 X105.026 Y138.001 E6.33588 ; infill
 G1 X105.026 Y138.779 E6.37197 ; infill
 G1 X104.468 Y138.779 E6.39789 ; infill
 G1 X104.468 Y138.001 E6.43398 ; infill
 G1 X103.909 Y138.001 E6.45990 ; infill
 G1 X103.909 Y138.779 E6.49599 ; infill
 G1 X103.351 Y138.779 E6.52191 ; infill
 G1 X103.351 Y138.001 E6.55800 ; infill
 G1 X102.793 Y138.001 E6.58392 ; infill
 G1 X102.793 Y138.779 E6.62001 ; infill
 G1 X102.234 Y138.779 E6.64593 ; infill
 G1 X102.234 Y138.001 E6.68202 ; infill
 G1 X101.676 Y138.001 E6.70794 ; infill
 G1 X101.676 Y138.779 E6.74403 ; infill
 G1 X101.118 Y138.779 E6.76995 ; infill
 G1 X101.118 Y138.001 E6.80604 ; infill
 G1 X100.559 Y138.001 E6.83196 ; infill
 G1 X100.559 Y138.779 E6.86805 ; infill
 G1 X100.001 Y138.779 E6.89397 ; infill
 G1 X100.001 Y138.001 E6.93006 ; infill
 G1 X99.443 Y138.001 E6.95598 ; infill
 G1 X99.443 Y138.779 E6.99206 ; infill
 G1 X98.884 Y138.779 E7.01799 ; infill
 G1 X98.884 Y138.001 E7.05407 ; infill
 G1 X98.326 Y138.001 E7.08000 ; infill
 G1 X98.326 Y138.779 E7.11608 ; infill
 G1 X97.767 Y138.779 E7.14201 ; infill
 G1 X97.767 Y138.001 E7.17809 ; infill
 G1 X97.209 Y138.001 E7.20402 ; infill
 G1 X97.209 Y138.779 E7.24010 ; infill
 G1 X96.651 Y138.779 E7.26603 ; infill
 G1 X96.651 Y134.201 E7.47854 ; infill
 G1 X96.092 Y134.201 E7.50446 ; infill
 G1 X96.092 Y138.779 E7.71697 ; infill
 G1 X95.534 Y138.779 E7.74290 ; infill
 G1 X95.534 Y134.201 E7.95541 ; infill
 G1 X94.976 Y134.201 E7.98133 ; infill
 G1 X94.976 Y138.779 E8.19385 ; infill
 G1 X94.417 Y138.779 E8.21977 ; infill
 G1 X94.417 Y134.201 E8.43228 ; infill
 G1 X93.859 Y134.201 E8.45821 ; infill
 G1 X93.859 Y138.779 E8.67072 ; infill
 G1 X93.301 Y138.625 E8.69760 ; infill
 G1 X93.301 Y122.181 E9.46110 ; infill
 G1 X92.742 Y121.950 E9.48915 ; infill
 G1 X92.742 Y138.286 E10.24760 ; infill
 G1 X92.184 Y136.984 F12000.000 ; move to first infill point
 G1 X92.184 Y133.450 E10.41171 F7200.000 ; infill
 G1 F9600
 G1 X92.184 Y136.984 E9.57220 ; wipe and retract
 G1 E5.41171 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.600 F12000.000 ; lift Z
 G1 X107.818 Y135.966 F12000.000 ; move to first infill point
 G1 Z9.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X107.818 Y137.597 E5.07572 F7200.000 ; infill
 G1 F9600
 G1 X107.818 Y135.966 E4.68840 ; wipe and retract
 G1 E0.07572 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.600 F12000.000 ; lift Z
 G1 X91.703 Y119.744 F12000.000 ; move to first infill point
 G1 Z9.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.491 Y119.308 E5.01440 F1800.000 ; infill
 G1 X91.388 Y118.357 E5.04280 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E4.81559 ; wipe and retract
 G1 F9600
 G1 X91.703 Y119.744 E4.70044 ; wipe and retract
 G1 E0.04280 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.600 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z9.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X104.774 Y121.808 F12000.000 ; move to first infill point
 G1 X104.774 Y121.449 E5.07163 F7200.000 ; infill
 G1 X105.374 Y121.352 E5.10194 ; infill
 G1 X105.374 Y121.808 E5.12466 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.930 E5.19070 F1800.000 ; infill
 G1 X105.579 Y117.930 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.20887 F1800.000 ; infill
 G1 X104.413 Y110.364 E5.41805 ; infill
 G1 X102.427 Y97.969 F12000.000 ; move to first infill point
 G1 X98.594 Y74.053 E6.94281 F1800.000 ; infill
 G1 X98.594 Y74.053 F12000.000 ; move to first infill point
 G1 X97.962 Y70.107 E7.06146 F1800.000 ; infill
 G1 X94.434 Y69.008 F12000.000 ; move to first infill point
 G1 X94.434 Y65.971 E7.21422 F7200.000 ; infill
 G1 X93.829 Y65.971 E7.24466 ; infill
 G1 X93.829 Y69.008 E7.39742 ; infill
 G1 X93.224 Y69.008 E7.42786 ; infill
 G1 X93.224 Y65.971 E7.58063 ; infill
 G1 X92.619 Y65.971 E7.61107 ; infill
 G1 X92.619 Y69.008 E7.76383 ; infill
 G1 F9600
 G1 X92.619 Y65.971 E7.04267 ; wipe and retract
 G1 F9600
 G1 X93.224 Y65.971 E6.89897 ; wipe and retract
 G1 F9600
 G1 X93.224 Y69.008 E6.17782 ; wipe and retract
 G1 F9600
 G1 X93.829 Y69.008 E6.03412 ; wipe and retract
 G1 F9600
 G1 X93.829 Y65.971 E5.31296 ; wipe and retract
 G1 F9600
 G1 X94.434 Y65.971 E5.16926 ; wipe and retract
 G1 F9600
 G1 X94.434 Y69.008 E4.44811 ; wipe and retract
 G1 E2.76383 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.600 F12000.000 ; lift Z
 G1 X96.608 Y62.065 F12000.000 ; move to first perimeter point
 G1 Z9.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X90.489 Y62.065 E5.18170 F7200.000 ; perimeter
 G1 X90.507 Y59.215 E5.26632 ; perimeter
 G1 X96.608 Y59.215 E5.44747 ; perimeter
 G1 X96.608 Y62.005 E5.53031 ; perimeter
 G1 X96.262 Y61.865 F12000.000 ; move inwards before travel
 G1 X96.251 Y61.708 F12000.000 ; move to first perimeter point
 G1 X90.848 Y61.708 E5.69074 F7200.000 ; perimeter
 G1 X90.862 Y59.572 E5.75415 ; perimeter
 G1 X96.251 Y59.572 E5.91417 ; perimeter
 G1 X96.251 Y61.648 E5.97581 ; perimeter
 G1 X95.894 Y61.350 F12000.000 ; move to first perimeter point
 G1 X91.207 Y61.350 E6.11496 F7200.000 ; perimeter
 G1 X91.216 Y59.929 E6.15717 ; perimeter
 G1 X95.894 Y59.929 E6.29605 ; perimeter
 G1 X95.894 Y61.290 E6.33648 ; perimeter
 G1 X95.537 Y60.993 F12000.000 ; move to first perimeter point
 G1 X91.567 Y60.993 E6.45436 F7200.000 ; perimeter
 G1 X91.571 Y60.286 E6.47537 ; perimeter
 G1 X95.537 Y60.286 E6.59312 ; perimeter
 G1 X95.537 Y60.933 E6.61234 ; perimeter
 G1 X95.358 Y60.640 F12000.000 ; move to first infill point
 G1 X91.747 Y60.640 E6.83965 F1800.000 ; infill
 G1 F9600
 G1 X95.358 Y60.640 E5.98208 ; wipe and retract
 G1 E1.83965 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.600 F12000.000 ; lift Z
 G1 X96.608 Y69.215 F12000.000 ; move to first perimeter point
 G1 Z9.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.811 Y69.215 E5.06541 F7200.000 ; perimeter
 G1 X107.942 Y123.815 E6.70907 ; perimeter
 G1 X95.608 Y123.815 E7.07527 ; perimeter
 G1 X95.608 Y132.215 E7.32468 ; perimeter
 G1 X109.346 Y132.215 E7.73258 ; perimeter
 G1 X109.992 Y136.074 E7.84876 ; perimeter
 G1 X109.992 Y137.923 E7.90365 ; perimeter
 G1 X109.148 Y139.531 E7.95757 ; perimeter
 G1 X107.653 Y140.562 E8.01149 ; perimeter
 G1 X105.814 Y140.785 E8.06651 ; perimeter
 G1 X93.363 Y140.785 E8.43620 ; perimeter
 G1 X91.653 Y140.137 E8.49050 ; perimeter
 G1 X90.449 Y138.778 E8.54441 ; perimeter
 G1 X90.008 Y136.991 E8.59905 ; perimeter
 G1 X90.477 Y63.911 E10.76894 ; perimeter
 G1 X96.608 Y63.911 E10.95099 ; perimeter
 G1 X96.608 Y69.155 E11.10668 ; perimeter
 G1 X96.608 Y69.615 F12000.000 ; move inwards before travel
 G1 X96.251 Y69.572 F12000.000 ; move to first perimeter point
 G1 X98.509 Y69.572 E11.17371 F7200.000 ; perimeter
 G1 X107.520 Y123.458 E12.79587 ; perimeter
 G1 X95.251 Y123.458 E13.16015 ; perimeter
 G1 X95.251 Y132.572 E13.43076 ; perimeter
 G1 X98.451 Y132.572 E13.52577 ; perimeter
 G1 X98.451 Y136.372 E13.63860 ; perimeter
 G1 X105.165 Y136.372 E13.83795 ; perimeter
 G1 X105.165 Y132.572 E13.95078 ; perimeter
 G1 X109.044 Y132.572 E14.06595 ; perimeter
 G1 X109.635 Y136.104 E14.17227 ; perimeter
 G1 X109.635 Y137.835 E14.22367 ; perimeter
 G1 X108.873 Y139.287 E14.27236 ; perimeter
 G1 X107.523 Y140.218 E14.32105 ; perimeter
 G1 X105.792 Y140.428 E14.37282 ; perimeter
 G1 X93.428 Y140.428 E14.73993 ; perimeter
 G1 X91.862 Y139.834 E14.78967 ; perimeter
 G1 X90.774 Y138.607 E14.83836 ; perimeter
 G1 X90.366 Y136.949 E14.88906 ; perimeter
 G1 X90.832 Y64.268 E17.04709 ; perimeter
 G1 X96.251 Y64.268 E17.20800 ; perimeter
 G1 X96.251 Y69.512 E17.36369 ; perimeter
 G1 X95.894 Y69.929 F12000.000 ; move to first perimeter point
 G1 X98.206 Y69.929 E17.43235 F7200.000 ; perimeter
 G1 X107.098 Y123.100 E19.03301 ; perimeter
 G1 X94.894 Y123.100 E19.39537 ; perimeter
 G1 X94.894 Y132.929 E19.68719 ; perimeter
 G1 X98.094 Y132.929 E19.78220 ; perimeter
 G1 X98.094 Y136.729 E19.89503 ; perimeter
 G1 X105.522 Y136.729 E20.11558 ; perimeter
 G1 X105.522 Y132.929 E20.22841 ; perimeter
 G1 X108.742 Y132.929 E20.32400 ; perimeter
 G1 X109.278 Y136.133 E20.42047 ; perimeter
 G1 X109.278 Y137.747 E20.46837 ; perimeter
 G1 X108.597 Y139.043 E20.51183 ; perimeter
 G1 X107.393 Y139.874 E20.55530 ; perimeter
 G1 X105.771 Y140.071 E20.60381 ; perimeter
 G1 X93.493 Y140.071 E20.96834 ; perimeter
 G1 X92.071 Y139.532 E21.01352 ; perimeter
 G1 X91.100 Y138.436 E21.05698 ; perimeter
 G1 X90.723 Y136.906 E21.10375 ; perimeter
 G1 X91.186 Y64.625 E23.24992 ; perimeter
 G1 X95.894 Y64.625 E23.38970 ; perimeter
 G1 X95.894 Y69.869 E23.54539 ; perimeter
 G1 X91.819 Y69.943 F12000.000 ; move to first perimeter point
 G1 X91.536 Y118.153 E24.97681 F7200.000 ; perimeter
 G1 X91.886 Y119.700 E25.02392 ; perimeter
 G1 X92.975 Y121.041 E25.07521 ; perimeter
 G1 X94.490 Y121.668 E25.12391 ; perimeter
 G1 X101.702 Y121.668 E25.33803 ; perimeter
 G1 X103.161 Y121.475 E25.38174 ; perimeter
 G1 X104.541 Y120.436 E25.43303 ; perimeter
 G1 X105.290 Y118.879 E25.48433 ; perimeter
 G1 X105.290 Y117.343 E25.52992 ; perimeter
 G1 X102.350 Y98.162 E26.10609 ; perimeter
 G1 X102.560 Y98.128 E26.11241 ; perimeter
 G1 X106.677 Y122.743 E26.85341 ; perimeter
 G1 X94.537 Y122.743 E27.21385 ; perimeter
 G1 X94.537 Y133.286 E27.52687 ; perimeter
 G1 X97.737 Y133.286 E27.62188 ; perimeter
 G1 X97.737 Y137.086 E27.73471 ; perimeter
 G1 X105.879 Y137.086 E27.97647 ; perimeter
 G1 X105.879 Y133.286 E28.08930 ; perimeter
 G1 X108.440 Y133.286 E28.16531 ; perimeter
 G1 X108.921 Y136.163 E28.25192 ; perimeter
 G1 X108.921 Y137.659 E28.29633 ; perimeter
 G1 X108.322 Y138.799 E28.33457 ; perimeter
 G1 X107.262 Y139.530 E28.37281 ; perimeter
 G1 X105.749 Y139.714 E28.41806 ; perimeter
 G1 X93.559 Y139.714 E28.78000 ; perimeter
 G1 X92.280 Y139.229 E28.82063 ; perimeter
 G1 X91.426 Y138.265 E28.85887 ; perimeter
 G1 X91.080 Y136.864 E28.90170 ; perimeter
 G1 X91.541 Y64.982 E31.03602 ; perimeter
 G1 X95.537 Y64.982 E31.15466 ; perimeter
 G1 X95.537 Y69.943 E31.30196 ; perimeter
 G1 X91.879 Y69.943 E31.41055 ; perimeter
 G1 X91.869 Y69.586 F12000.000 ; move to first perimeter point
 G1 X91.896 Y65.339 E31.53666 F7200.000 ; perimeter
 G1 X95.180 Y65.339 E31.63416 ; perimeter
 G1 X95.180 Y69.586 E31.76026 ; perimeter
 G1 X91.929 Y69.586 E31.85679 ; perimeter
 G1 X92.228 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.251 Y65.696 E31.96168 F7200.000 ; perimeter
 G1 X94.823 Y65.696 E32.03805 ; perimeter
 G1 X94.823 Y69.229 E32.14294 ; perimeter
 G1 X92.288 Y69.229 E32.21820 ; perimeter
 G1 F9600
 G1 X92.251 Y65.696 E31.37911 ; wipe and retract
 G1 F9600
 G1 X94.823 Y65.696 E30.76826 ; wipe and retract
 G1 F9600
 G1 X94.823 Y69.229 E29.92921 ; wipe and retract
 G1 F9600
 G1 X92.288 Y69.229 E29.32724 ; wipe and retract
 G1 E27.21820 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.800 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z9.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X106.236 Y137.443 E5.80503 ; perimeter
 G1 X106.236 Y133.643 E5.91785 ; perimeter
 G1 X108.137 Y133.643 E5.97429 ; perimeter
 G1 X108.564 Y136.193 E6.05104 ; perimeter
 G1 X108.564 Y137.571 E6.09196 ; perimeter
 G1 X108.047 Y138.555 E6.12497 ; perimeter
 G1 X107.132 Y139.187 E6.15798 ; perimeter
 G1 X105.728 Y139.357 E6.19998 ; perimeter
 G1 X93.624 Y139.357 E6.55934 ; perimeter
 G1 X92.488 Y138.926 E6.59541 ; perimeter
 G1 X91.751 Y138.094 E6.62842 ; perimeter
 G1 X91.438 Y136.822 E6.66732 ; perimeter
 G1 X91.546 Y119.849 E7.17128 ; perimeter
 G1 X92.754 Y121.337 E7.22818 ; perimeter
 G1 X94.419 Y122.025 E7.28168 ; perimeter
 G1 X101.725 Y122.025 E7.49860 ; perimeter
 G1 X103.301 Y121.817 E7.54579 ; perimeter
 G1 X104.825 Y120.669 E7.60245 ; perimeter
 G1 X105.561 Y119.141 E7.65279 ; perimeter
 G1 X105.716 Y119.163 E7.65745 ; perimeter
 G1 X106.255 Y122.386 E7.75447 ; perimeter
 G1 X94.240 Y122.386 E8.11121 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E8.11579 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E8.16422 ; perimeter
 G1 X105.394 Y120.311 E8.18370 ; perimeter
 G1 X105.549 Y120.333 E8.18835 ; perimeter
 G1 X105.833 Y122.029 E8.23942 ; perimeter
 G1 X103.916 Y122.029 E8.29635 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E8.25304 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.86568 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E7.70986 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E7.67261 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E7.26411 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.80871 ; wipe and retract
 G1 E3.29635 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.800 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z9.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X106.593 Y137.800 E5.49201 ; perimeter
 G1 X106.593 Y134.000 E5.60483 ; perimeter
 G1 X107.835 Y134.000 E5.64169 ; perimeter
 G1 X108.207 Y136.222 E5.70859 ; perimeter
 G1 X108.207 Y137.482 E5.74601 ; perimeter
 G1 X107.772 Y138.311 E5.77380 ; perimeter
 G1 X107.001 Y138.843 E5.80158 ; perimeter
 G1 X105.706 Y139.000 E5.84033 ; perimeter
 G1 X93.690 Y139.000 E6.19710 ; perimeter
 G1 X92.697 Y138.624 E6.22862 ; perimeter
 G1 X92.077 Y137.923 E6.25640 ; perimeter
 G1 X91.795 Y136.780 E6.29137 ; perimeter
 G1 X91.897 Y120.847 E6.76443 ; perimeter
 G1 X92.534 Y121.632 E6.79444 ; perimeter
 G1 X93.823 Y122.165 E6.83584 ; perimeter
 G1 X93.823 Y133.940 E7.18545 ; perimeter
 G1 F9600
 G1 X97.023 Y134.000 E6.42532 ; wipe and retract
 G1 F9600
 G1 X97.023 Y137.800 E5.52282 ; wipe and retract
 G1 F9600
 G1 X106.593 Y137.800 E3.24976 ; wipe and retract
 G1 F9600
 G1 X106.593 Y134.371 E2.43545 ; wipe and retract
 G1 E2.18545 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.800 F12000.000 ; lift Z
 G1 X92.884 Y71.015 F12000.000 ; move to first perimeter point
 G1 Z9.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.105 Y71.015 E5.12531 F7200.000 ; perimeter
 G1 X104.219 Y117.425 E6.51939 ; perimeter
 G1 X104.219 Y118.635 E6.55531 ; perimeter
 G1 X103.689 Y119.737 E6.59162 ; perimeter
 G1 X102.742 Y120.450 E6.62683 ; perimeter
 G1 X101.631 Y120.597 E6.66009 ; perimeter
 G1 X94.703 Y120.597 E6.86579 ; perimeter
 G1 X93.635 Y120.155 E6.90011 ; perimeter
 G1 X92.875 Y119.220 E6.93589 ; perimeter
 G1 X92.608 Y118.036 E6.97191 ; perimeter
 G1 X92.884 Y71.075 E8.36629 ; perimeter
 G1 X92.885 Y70.615 F12000.000 ; move inwards before travel
 G1 X92.529 Y70.658 F12000.000 ; move to first perimeter point
 G1 X97.411 Y70.658 E8.51124 F7200.000 ; perimeter
 G1 X104.576 Y117.398 E9.91523 ; perimeter
 G1 X104.576 Y118.716 E9.95438 ; perimeter
 G1 X103.973 Y119.970 E9.99568 ; perimeter
 G1 X102.881 Y120.792 E10.03626 ; perimeter
 G1 X101.655 Y120.954 E10.07300 ; perimeter
 G1 X94.632 Y120.954 E10.28150 ; perimeter
 G1 X93.415 Y120.451 E10.32062 ; perimeter
 G1 X92.545 Y119.380 E10.36157 ; perimeter
 G1 X92.251 Y118.075 E10.40129 ; perimeter
 G1 X92.529 Y70.718 E11.80742 ; perimeter
 G1 X92.174 Y70.300 F12000.000 ; move to first perimeter point
 G1 X97.718 Y70.300 E11.97201 F7200.000 ; perimeter
 G1 X104.933 Y117.371 E13.38591 ; perimeter
 G1 X104.933 Y118.797 E13.42828 ; perimeter
 G1 X104.257 Y120.203 E13.47458 ; perimeter
 G1 X103.021 Y121.133 E13.52051 ; perimeter
 G1 X101.678 Y121.311 E13.56074 ; perimeter
 G1 X94.561 Y121.311 E13.77205 ; perimeter
 G1 X93.195 Y120.746 E13.81596 ; perimeter
 G1 X92.216 Y119.540 E13.86208 ; perimeter
 G1 X91.893 Y118.114 E13.90549 ; perimeter
 G1 X92.174 Y70.360 E15.32338 ; perimeter
 G1 F9600
 G1 X97.718 Y70.300 E14.00664 ; wipe and retract
 G1 F9600
 G1 X99.908 Y84.589 E10.57338 ; wipe and retract
 G1 E10.32338 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.800 F12000.000 ; lift Z
 G1 X98.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z9.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X104.808 Y133.015 E5.17815 F7200.000 ; perimeter
 G1 X104.808 Y136.015 E5.26722 ; perimeter
 G1 X98.808 Y136.015 E5.44537 ; perimeter
 G1 X98.808 Y133.075 E5.53266 ; perimeter
 G1 X98.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X104.987 Y132.615 E5.93285 F1800.000 ; infill
 G1 X107.726 Y134.586 F12000.000 ; move to first infill point
 G1 X106.795 Y134.586 E5.97739 F7200.000 ; infill
 G1 X106.795 Y135.161 E6.00489 ; infill
 G1 X107.823 Y135.161 E6.05403 ; infill
 G1 X107.919 Y135.736 E6.08192 ; infill
 G1 X106.795 Y135.736 E6.13566 ; infill
 G1 X106.795 Y136.311 E6.16316 ; infill
 G1 X107.985 Y136.311 E6.22008 ; infill
 G1 X107.985 Y136.886 E6.24758 ; infill
 G1 X106.795 Y136.886 E6.30450 ; infill
 G1 X106.795 Y137.461 E6.33200 ; infill
 G1 X107.969 Y137.461 E6.38812 ; infill
 G1 X107.667 Y138.036 E6.41918 ; infill
 G1 X106.795 Y138.036 E6.46087 ; infill
 G1 X106.015 Y138.612 E6.50720 ; infill
 G1 X93.538 Y138.612 E7.10389 ; infill
 G1 X96.821 Y138.036 F12000.000 ; move to first infill point
 G1 X92.502 Y138.036 E7.31042 F7200.000 ; infill
 G1 X92.175 Y137.461 E7.34205 ; infill
 G1 X96.821 Y137.461 E7.56422 ; infill
 G1 X96.821 Y136.886 E7.59172 ; infill
 G1 X92.034 Y136.886 E7.82067 ; infill
 G1 X92.017 Y136.311 E7.84818 ; infill
 G1 X96.821 Y136.311 E8.07794 ; infill
 G1 X96.821 Y135.736 E8.10544 ; infill
 G1 X92.017 Y135.736 E8.33519 ; infill
 G1 X92.017 Y135.161 E8.36270 ; infill
 G1 X96.821 Y135.161 E8.59245 ; infill
 G1 X96.821 Y134.586 E8.61995 ; infill
 G1 X92.017 Y134.586 E8.84971 ; infill
 G1 X93.621 Y134.011 F12000.000 ; move to first infill point
 G1 X92.017 Y134.011 E8.92644 F7200.000 ; infill
 G1 X92.018 Y133.436 E8.95394 ; infill
 G1 X93.621 Y133.436 E9.03062 ; infill
 G1 X93.621 Y132.860 E9.05812 ; infill
 G1 X92.022 Y132.860 E9.13462 ; infill
 G1 X92.025 Y132.285 E9.16212 ; infill
 G1 X93.621 Y132.285 E9.23845 ; infill
 G1 X93.621 Y131.710 E9.26595 ; infill
 G1 X92.029 Y131.710 E9.34210 ; infill
 G1 X92.033 Y131.135 E9.36960 ; infill
 G1 X93.621 Y131.135 E9.44557 ; infill
 G1 X93.621 Y130.560 E9.47307 ; infill
 G1 X92.036 Y130.560 E9.54887 ; infill
 G1 X92.040 Y129.985 E9.57637 ; infill
 G1 X93.621 Y129.985 E9.65199 ; infill
 G1 X93.621 Y129.410 E9.67949 ; infill
 G1 X92.044 Y129.410 E9.75493 ; infill
 G1 X92.047 Y128.835 E9.78243 ; infill
 G1 X93.621 Y128.835 E9.85770 ; infill
 G1 X93.621 Y128.260 E9.88520 ; infill
 G1 X92.051 Y128.260 E9.96029 ; infill
 G1 X92.055 Y127.685 E9.98780 ; infill
 G1 X93.621 Y127.685 E10.06271 ; infill
 G1 X93.621 Y127.109 E10.09021 ; infill
 G1 X92.058 Y127.109 E10.16495 ; infill
 G1 X92.062 Y126.534 E10.19245 ; infill
 G1 X93.621 Y126.534 E10.26701 ; infill
 G1 X93.621 Y125.959 E10.29451 ; infill
 G1 X92.066 Y125.959 E10.36890 ; infill
 G1 X92.069 Y125.384 E10.39640 ; infill
 G1 X93.621 Y125.384 E10.47061 ; infill
 G1 X93.621 Y124.809 E10.49811 ; infill
 G1 X92.073 Y124.809 E10.57214 ; infill
 G1 X92.077 Y124.234 E10.59965 ; infill
 G1 X93.621 Y124.234 E10.67350 ; infill
 G1 X93.621 Y123.659 E10.70100 ; infill
 G1 X92.081 Y123.659 E10.77468 ; infill
 G1 X92.084 Y123.084 E10.80219 ; infill
 G1 X93.621 Y123.084 E10.87569 ; infill
 G1 X93.621 Y122.509 E10.90319 ; infill
 G1 X92.088 Y122.509 E10.97652 ; infill
 G1 X92.092 Y121.934 E11.00402 ; infill
 G1 X92.472 Y121.934 E11.02219 ; infill
 G1 X91.703 Y119.744 F12000.000 ; move to first infill point
 G1 X91.491 Y119.308 E11.03659 F1800.000 ; infill
 G1 X91.388 Y118.357 E11.06499 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E10.83778 ; wipe and retract
 G1 F9600
 G1 X91.703 Y119.744 E10.72263 ; wipe and retract
 G1 E6.06499 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.800 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z9.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X105.107 Y121.240 F12000.000 ; move to first infill point
 G1 X105.494 Y121.240 E5.07167 F7200.000 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.930 E5.13770 F1800.000 ; infill
 G1 X105.579 Y117.930 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.15587 F1800.000 ; infill
 G1 X104.413 Y110.364 E5.36505 ; infill
 G1 X102.427 Y97.969 F12000.000 ; move to first infill point
 G1 X98.594 Y74.053 E6.88982 F1800.000 ; infill
 G1 X98.594 Y74.053 F12000.000 ; move to first infill point
 G1 X97.962 Y70.107 E7.00846 F1800.000 ; infill
 G1 F9600
 G1 X98.594 Y74.053 E6.05945 ; wipe and retract
 G1 E2.00846 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.800 F12000.000 ; lift Z
 G1 X94.601 Y66.085 F12000.000 ; move to first infill point
 G1 Z9.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X92.452 Y66.085 E5.12313 F7200.000 ; infill
 G1 X92.452 Y66.774 E5.16260 ; infill
 G1 X94.601 Y66.774 E5.28573 ; infill
 G1 X94.601 Y67.463 E5.32520 ; infill
 G1 X92.452 Y67.463 E5.44833 ; infill
 G1 X92.452 Y68.152 E5.48779 ; infill
 G1 X94.601 Y68.152 E5.61093 ; infill
 G1 X94.601 Y68.841 E5.65039 ; infill
 G1 X92.452 Y68.841 E5.77352 ; infill
 G1 F9600
 G1 X94.601 Y68.841 E5.26304 ; wipe and retract
 G1 F9600
 G1 X94.601 Y68.152 E5.09942 ; wipe and retract
 G1 F9600
 G1 X92.452 Y68.152 E4.58894 ; wipe and retract
 G1 F9600
 G1 X92.452 Y67.463 E4.42531 ; wipe and retract
 G1 F9600
 G1 X94.601 Y67.463 E3.91484 ; wipe and retract
 G1 F9600
 G1 X94.601 Y66.774 E3.75121 ; wipe and retract
 G1 F9600
 G1 X92.452 Y66.774 E3.24073 ; wipe and retract
 G1 F9600
 G1 X92.452 Y66.085 E3.07711 ; wipe and retract
 G1 F9600
 G1 X94.601 Y66.085 E2.56663 ; wipe and retract
 G1 E0.77352 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.800 F12000.000 ; lift Z
 G1 X96.608 Y62.118 F12000.000 ; move to first perimeter point
 G1 Z9.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X90.488 Y62.118 E5.18171 F7200.000 ; perimeter
 G1 X90.507 Y59.215 E5.26792 ; perimeter
 G1 X96.608 Y59.215 E5.44908 ; perimeter
 G1 X96.608 Y62.058 E5.53351 ; perimeter
 G1 X96.262 Y61.918 F12000.000 ; move inwards before travel
 G1 X96.251 Y61.761 F12000.000 ; move to first perimeter point
 G1 X90.848 Y61.761 E5.69394 F7200.000 ; perimeter
 G1 X90.862 Y59.572 E5.75895 ; perimeter
 G1 X96.251 Y59.572 E5.91897 ; perimeter
 G1 X96.251 Y61.701 E5.98219 ; perimeter
 G1 X95.894 Y61.404 F12000.000 ; move to first perimeter point
 G1 X91.207 Y61.404 E6.12136 F7200.000 ; perimeter
 G1 X91.216 Y59.929 E6.16516 ; perimeter
 G1 X95.894 Y59.929 E6.30404 ; perimeter
 G1 X95.894 Y61.344 E6.34606 ; perimeter
 G1 X95.537 Y61.047 F12000.000 ; move to first perimeter point
 G1 X91.566 Y61.047 E6.46395 F7200.000 ; perimeter
 G1 X91.571 Y60.286 E6.48655 ; perimeter
 G1 X95.537 Y60.286 E6.60430 ; perimeter
 G1 X95.537 Y60.987 E6.62512 ; perimeter
 G1 X95.358 Y60.666 F12000.000 ; move to first infill point
 G1 X91.747 Y60.666 E6.85243 F1800.000 ; infill
 G1 F9600
 G1 X95.358 Y60.666 E5.99482 ; wipe and retract
 G1 E1.85243 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z10.800 F12000.000 ; lift Z
 G1 X96.608 Y69.215 F12000.000 ; move to first perimeter point
 G1 Z10.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.811 Y69.215 E5.06541 F7200.000 ; perimeter
 G1 X107.942 Y123.815 E6.70907 ; perimeter
 G1 X95.608 Y123.815 E7.07527 ; perimeter
 G1 X95.608 Y132.215 E7.32467 ; perimeter
 G1 X109.346 Y132.215 E7.73258 ; perimeter
 G1 X109.992 Y136.074 E7.84876 ; perimeter
 G1 X109.992 Y137.923 E7.90365 ; perimeter
 G1 X109.148 Y139.531 E7.95757 ; perimeter
 G1 X107.653 Y140.562 E8.01149 ; perimeter
 G1 X105.814 Y140.785 E8.06651 ; perimeter
 G1 X93.363 Y140.785 E8.43620 ; perimeter
 G1 X91.653 Y140.137 E8.49050 ; perimeter
 G1 X90.449 Y138.778 E8.54441 ; perimeter
 G1 X90.008 Y136.991 E8.59905 ; perimeter
 G1 X90.477 Y63.839 E10.77107 ; perimeter
 G1 X96.608 Y63.839 E10.95311 ; perimeter
 G1 X96.608 Y69.155 E11.11093 ; perimeter
 G1 X96.608 Y69.615 F12000.000 ; move inwards before travel
 G1 X96.251 Y69.572 F12000.000 ; move to first perimeter point
 G1 X98.509 Y69.572 E11.17797 F7200.000 ; perimeter
 G1 X107.520 Y123.458 E12.80012 ; perimeter
 G1 X95.251 Y123.458 E13.16441 ; perimeter
 G1 X95.251 Y132.572 E13.43502 ; perimeter
 G1 X98.451 Y132.572 E13.53003 ; perimeter
 G1 X98.451 Y136.372 E13.64286 ; perimeter
 G1 X105.165 Y136.372 E13.84221 ; perimeter
 G1 X105.165 Y132.572 E13.95504 ; perimeter
 G1 X109.044 Y132.572 E14.07021 ; perimeter
 G1 X109.635 Y136.104 E14.17653 ; perimeter
 G1 X109.635 Y137.835 E14.22793 ; perimeter
 G1 X108.873 Y139.287 E14.27662 ; perimeter
 G1 X107.523 Y140.218 E14.32531 ; perimeter
 G1 X105.792 Y140.428 E14.37707 ; perimeter
 G1 X93.428 Y140.428 E14.74418 ; perimeter
 G1 X91.862 Y139.834 E14.79392 ; perimeter
 G1 X90.774 Y138.607 E14.84261 ; perimeter
 G1 X90.366 Y136.949 E14.89332 ; perimeter
 G1 X90.832 Y64.196 E17.05348 ; perimeter
 G1 X96.251 Y64.196 E17.21438 ; perimeter
 G1 X96.251 Y69.512 E17.37220 ; perimeter
 G1 X95.894 Y69.929 F12000.000 ; move to first perimeter point
 G1 X98.206 Y69.929 E17.44086 F7200.000 ; perimeter
 G1 X107.098 Y123.100 E19.04152 ; perimeter
 G1 X94.894 Y123.100 E19.40388 ; perimeter
 G1 X94.894 Y132.929 E19.69570 ; perimeter
 G1 X98.094 Y132.929 E19.79071 ; perimeter
 G1 X98.094 Y136.729 E19.90354 ; perimeter
 G1 X105.522 Y136.729 E20.12409 ; perimeter
 G1 X105.522 Y132.929 E20.23692 ; perimeter
 G1 X108.742 Y132.929 E20.33251 ; perimeter
 G1 X109.278 Y136.133 E20.42898 ; perimeter
 G1 X109.278 Y137.747 E20.47688 ; perimeter
 G1 X108.597 Y139.043 E20.52035 ; perimeter
 G1 X107.393 Y139.874 E20.56381 ; perimeter
 G1 X105.771 Y140.071 E20.61232 ; perimeter
 G1 X93.493 Y140.071 E20.97685 ; perimeter
 G1 X92.071 Y139.532 E21.02203 ; perimeter
 G1 X91.100 Y138.436 E21.06549 ; perimeter
 G1 X90.723 Y136.906 E21.11226 ; perimeter
 G1 X91.187 Y64.553 E23.26057 ; perimeter
 G1 X95.894 Y64.553 E23.40033 ; perimeter
 G1 X95.894 Y69.869 E23.55816 ; perimeter
 G1 X91.819 Y69.943 F12000.000 ; move to first perimeter point
 G1 X91.536 Y118.153 E24.98958 F7200.000 ; perimeter
 G1 X91.886 Y119.700 E25.03669 ; perimeter
 G1 X92.975 Y121.041 E25.08798 ; perimeter
 G1 X94.490 Y121.668 E25.13668 ; perimeter
 G1 X101.702 Y121.668 E25.35079 ; perimeter
 G1 X103.161 Y121.475 E25.39450 ; perimeter
 G1 X104.541 Y120.436 E25.44580 ; perimeter
 G1 X105.290 Y118.879 E25.49710 ; perimeter
 G1 X105.290 Y117.343 E25.54269 ; perimeter
 G1 X102.350 Y98.162 E26.11886 ; perimeter
 G1 X102.560 Y98.129 E26.12518 ; perimeter
 G1 X106.677 Y122.743 E26.86617 ; perimeter
 G1 X94.537 Y122.743 E27.22661 ; perimeter
 G1 X94.537 Y133.286 E27.53963 ; perimeter
 G1 X97.737 Y133.286 E27.63465 ; perimeter
 G1 X97.737 Y137.086 E27.74747 ; perimeter
 G1 X105.879 Y137.086 E27.98923 ; perimeter
 G1 X105.879 Y133.286 E28.10206 ; perimeter
 G1 X108.440 Y133.286 E28.17808 ; perimeter
 G1 X108.921 Y136.163 E28.26468 ; perimeter
 G1 X108.921 Y137.659 E28.30909 ; perimeter
 G1 X108.322 Y138.799 E28.34733 ; perimeter
 G1 X107.262 Y139.530 E28.38557 ; perimeter
 G1 X105.749 Y139.714 E28.43083 ; perimeter
 G1 X93.559 Y139.714 E28.79277 ; perimeter
 G1 X92.280 Y139.229 E28.83339 ; perimeter
 G1 X91.426 Y138.265 E28.87163 ; perimeter
 G1 X91.080 Y136.864 E28.91447 ; perimeter
 G1 X91.542 Y64.910 E31.05092 ; perimeter
 G1 X95.537 Y64.910 E31.16954 ; perimeter
 G1 X95.537 Y69.943 E31.31898 ; perimeter
 G1 X91.879 Y69.943 E31.42758 ; perimeter
 G1 X91.869 Y69.586 F12000.000 ; move to first perimeter point
 G1 X91.896 Y65.267 E31.55581 F7200.000 ; perimeter
 G1 X95.180 Y65.267 E31.65330 ; perimeter
 G1 X95.180 Y69.586 E31.78153 ; perimeter
 G1 X91.929 Y69.586 E31.87806 ; perimeter
 G1 X92.228 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.251 Y65.624 E31.98509 F7200.000 ; perimeter
 G1 X94.823 Y65.624 E32.06145 ; perimeter
 G1 X94.823 Y69.229 E32.16847 ; perimeter
 G1 X92.288 Y69.229 E32.24373 ; perimeter
 G1 F9600
 G1 X92.251 Y65.624 E31.38757 ; wipe and retract
 G1 F9600
 G1 X94.823 Y65.624 E30.77683 ; wipe and retract
 G1 F9600
 G1 X94.823 Y69.229 E29.92071 ; wipe and retract
 G1 F9600
 G1 X92.288 Y69.229 E29.31873 ; wipe and retract
 G1 E27.24373 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.000 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z10.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X106.236 Y137.443 E5.80503 ; perimeter
 G1 X106.236 Y133.643 E5.91785 ; perimeter
 G1 X108.137 Y133.643 E5.97429 ; perimeter
 G1 X108.564 Y136.193 E6.05104 ; perimeter
 G1 X108.564 Y137.571 E6.09196 ; perimeter
 G1 X108.047 Y138.555 E6.12497 ; perimeter
 G1 X107.132 Y139.187 E6.15798 ; perimeter
 G1 X105.728 Y139.357 E6.19998 ; perimeter
 G1 X93.624 Y139.357 E6.55934 ; perimeter
 G1 X92.488 Y138.926 E6.59541 ; perimeter
 G1 X91.751 Y138.094 E6.62842 ; perimeter
 G1 X91.438 Y136.822 E6.66732 ; perimeter
 G1 X91.546 Y119.849 E7.17128 ; perimeter
 G1 X92.754 Y121.337 E7.22818 ; perimeter
 G1 X94.419 Y122.025 E7.28168 ; perimeter
 G1 X101.725 Y122.025 E7.49860 ; perimeter
 G1 X103.301 Y121.817 E7.54579 ; perimeter
 G1 X104.825 Y120.669 E7.60245 ; perimeter
 G1 X105.561 Y119.141 E7.65279 ; perimeter
 G1 X105.716 Y119.163 E7.65745 ; perimeter
 G1 X106.255 Y122.386 E7.75447 ; perimeter
 G1 X94.240 Y122.386 E8.11121 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E8.11579 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E8.16422 ; perimeter
 G1 X105.394 Y120.311 E8.18370 ; perimeter
 G1 X105.549 Y120.333 E8.18835 ; perimeter
 G1 X105.833 Y122.029 E8.23942 ; perimeter
 G1 X103.916 Y122.029 E8.29635 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E8.25304 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.86568 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E7.70986 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E7.67261 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E7.26411 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.80871 ; wipe and retract
 G1 E3.29635 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.000 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z10.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X106.593 Y137.800 E5.49201 ; perimeter
 G1 X106.593 Y134.000 E5.60483 ; perimeter
 G1 X107.835 Y134.000 E5.64169 ; perimeter
 G1 X108.207 Y136.222 E5.70859 ; perimeter
 G1 X108.207 Y137.482 E5.74601 ; perimeter
 G1 X107.772 Y138.311 E5.77380 ; perimeter
 G1 X107.001 Y138.843 E5.80158 ; perimeter
 G1 X105.706 Y139.000 E5.84033 ; perimeter
 G1 X93.690 Y139.000 E6.19710 ; perimeter
 G1 X92.697 Y138.624 E6.22862 ; perimeter
 G1 X92.077 Y137.923 E6.25640 ; perimeter
 G1 X91.795 Y136.780 E6.29137 ; perimeter
 G1 X91.897 Y120.847 E6.76443 ; perimeter
 G1 X92.534 Y121.632 E6.79444 ; perimeter
 G1 X93.823 Y122.165 E6.83584 ; perimeter
 G1 X93.823 Y133.940 E7.18545 ; perimeter
 G1 F9600
 G1 X97.023 Y134.000 E6.42532 ; wipe and retract
 G1 F9600
 G1 X97.023 Y137.800 E5.52282 ; wipe and retract
 G1 F9600
 G1 X106.593 Y137.800 E3.24976 ; wipe and retract
 G1 F9600
 G1 X106.593 Y134.371 E2.43545 ; wipe and retract
 G1 E2.18545 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.000 F12000.000 ; lift Z
 G1 X92.884 Y71.015 F12000.000 ; move to first perimeter point
 G1 Z10.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.105 Y71.015 E5.12531 F7200.000 ; perimeter
 G1 X104.219 Y117.425 E6.51939 ; perimeter
 G1 X104.219 Y118.635 E6.55531 ; perimeter
 G1 X103.689 Y119.737 E6.59162 ; perimeter
 G1 X102.742 Y120.450 E6.62683 ; perimeter
 G1 X101.631 Y120.597 E6.66009 ; perimeter
 G1 X94.703 Y120.597 E6.86579 ; perimeter
 G1 X93.635 Y120.155 E6.90011 ; perimeter
 G1 X92.875 Y119.220 E6.93589 ; perimeter
 G1 X92.608 Y118.036 E6.97191 ; perimeter
 G1 X92.884 Y71.075 E8.36629 ; perimeter
 G1 X92.885 Y70.615 F12000.000 ; move inwards before travel
 G1 X92.529 Y70.658 F12000.000 ; move to first perimeter point
 G1 X97.411 Y70.658 E8.51124 F7200.000 ; perimeter
 G1 X104.576 Y117.398 E9.91523 ; perimeter
 G1 X104.576 Y118.716 E9.95438 ; perimeter
 G1 X103.973 Y119.970 E9.99568 ; perimeter
 G1 X102.881 Y120.792 E10.03626 ; perimeter
 G1 X101.655 Y120.954 E10.07300 ; perimeter
 G1 X94.632 Y120.954 E10.28150 ; perimeter
 G1 X93.415 Y120.451 E10.32062 ; perimeter
 G1 X92.545 Y119.380 E10.36157 ; perimeter
 G1 X92.251 Y118.075 E10.40129 ; perimeter
 G1 X92.529 Y70.718 E11.80742 ; perimeter
 G1 X92.174 Y70.300 F12000.000 ; move to first perimeter point
 G1 X97.718 Y70.300 E11.97201 F7200.000 ; perimeter
 G1 X104.933 Y117.371 E13.38591 ; perimeter
 G1 X104.933 Y118.797 E13.42828 ; perimeter
 G1 X104.257 Y120.203 E13.47458 ; perimeter
 G1 X103.021 Y121.133 E13.52051 ; perimeter
 G1 X101.678 Y121.311 E13.56074 ; perimeter
 G1 X94.561 Y121.311 E13.77205 ; perimeter
 G1 X93.195 Y120.746 E13.81596 ; perimeter
 G1 X92.216 Y119.540 E13.86208 ; perimeter
 G1 X91.893 Y118.114 E13.90549 ; perimeter
 G1 X92.174 Y70.360 E15.32338 ; perimeter
 G1 F9600
 G1 X97.718 Y70.300 E14.00664 ; wipe and retract
 G1 F9600
 G1 X99.908 Y84.589 E10.57338 ; wipe and retract
 G1 E10.32338 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.000 F12000.000 ; lift Z
 G1 X98.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z10.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X104.808 Y133.015 E5.17815 F7200.000 ; perimeter
 G1 X104.808 Y136.015 E5.26722 ; perimeter
 G1 X98.808 Y136.015 E5.44537 ; perimeter
 G1 X98.808 Y133.075 E5.53266 ; perimeter
 G1 X98.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X104.987 Y132.615 E5.93285 F1800.000 ; infill
 G1 X107.260 Y134.201 F12000.000 ; move to first infill point
 G1 X107.260 Y138.384 E6.12703 F7200.000 ; infill
 G1 X106.701 Y138.675 E6.15627 ; infill
 G1 X106.701 Y138.001 E6.18755 ; infill
 G1 X106.143 Y138.001 E6.21347 ; infill
 G1 X106.143 Y138.743 E6.24790 ; infill
 G1 X105.585 Y138.779 E6.27388 ; infill
 G1 X105.585 Y138.001 E6.30996 ; infill
 G1 X105.026 Y138.001 E6.33588 ; infill
 G1 X105.026 Y138.779 E6.37197 ; infill
 G1 X104.468 Y138.779 E6.39789 ; infill
 G1 X104.468 Y138.001 E6.43398 ; infill
 G1 X103.909 Y138.001 E6.45990 ; infill
 G1 X103.909 Y138.779 E6.49599 ; infill
 G1 X103.351 Y138.779 E6.52191 ; infill
 G1 X103.351 Y138.001 E6.55800 ; infill
 G1 X102.793 Y138.001 E6.58392 ; infill
 G1 X102.793 Y138.779 E6.62001 ; infill
 G1 X102.234 Y138.779 E6.64593 ; infill
 G1 X102.234 Y138.001 E6.68202 ; infill
 G1 X101.676 Y138.001 E6.70794 ; infill
 G1 X101.676 Y138.779 E6.74403 ; infill
 G1 X101.118 Y138.779 E6.76995 ; infill
 G1 X101.118 Y138.001 E6.80604 ; infill
 G1 X100.559 Y138.001 E6.83196 ; infill
 G1 X100.559 Y138.779 E6.86805 ; infill
 G1 X100.001 Y138.779 E6.89397 ; infill
 G1 X100.001 Y138.001 E6.93006 ; infill
 G1 X99.443 Y138.001 E6.95598 ; infill
 G1 X99.443 Y138.779 E6.99206 ; infill
 G1 X98.884 Y138.779 E7.01799 ; infill
 G1 X98.884 Y138.001 E7.05407 ; infill
 G1 X98.326 Y138.001 E7.08000 ; infill
 G1 X98.326 Y138.779 E7.11608 ; infill
 G1 X97.767 Y138.779 E7.14201 ; infill
 G1 X97.767 Y138.001 E7.17809 ; infill
 G1 X97.209 Y138.001 E7.20402 ; infill
 G1 X97.209 Y138.779 E7.24010 ; infill
 G1 X96.651 Y138.779 E7.26603 ; infill
 G1 X96.651 Y134.201 E7.47854 ; infill
 G1 X96.092 Y134.201 E7.50446 ; infill
 G1 X96.092 Y138.779 E7.71697 ; infill
 G1 X95.534 Y138.779 E7.74290 ; infill
 G1 X95.534 Y134.201 E7.95541 ; infill
 G1 X94.976 Y134.201 E7.98133 ; infill
 G1 X94.976 Y138.779 E8.19385 ; infill
 G1 X94.417 Y138.779 E8.21977 ; infill
 G1 X94.417 Y134.201 E8.43228 ; infill
 G1 X93.859 Y134.201 E8.45821 ; infill
 G1 X93.859 Y138.779 E8.67072 ; infill
 G1 X93.301 Y138.625 E8.69760 ; infill
 G1 X93.301 Y122.181 E9.46110 ; infill
 G1 X92.742 Y121.950 E9.48915 ; infill
 G1 X92.742 Y138.286 E10.24760 ; infill
 G1 X92.184 Y136.984 F12000.000 ; move to first infill point
 G1 X92.184 Y133.450 E10.41171 F7200.000 ; infill
 G1 F9600
 G1 X92.184 Y136.984 E9.57220 ; wipe and retract
 G1 E5.41171 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.000 F12000.000 ; lift Z
 G1 X107.818 Y135.966 F12000.000 ; move to first infill point
 G1 Z10.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X107.818 Y137.597 E5.07572 F7200.000 ; infill
 G1 F9600
 G1 X107.818 Y135.966 E4.68840 ; wipe and retract
 G1 E0.07572 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.000 F12000.000 ; lift Z
 G1 X91.703 Y119.744 F12000.000 ; move to first infill point
 G1 Z10.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.491 Y119.308 E5.01440 F1800.000 ; infill
 G1 X91.388 Y118.357 E5.04280 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E4.81559 ; wipe and retract
 G1 F9600
 G1 X91.703 Y119.744 E4.70044 ; wipe and retract
 G1 E0.04280 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.000 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z10.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X104.774 Y121.808 F12000.000 ; move to first infill point
 G1 X104.774 Y121.449 E5.07163 F7200.000 ; infill
 G1 X105.374 Y121.352 E5.10194 ; infill
 G1 X105.374 Y121.808 E5.12466 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.930 E5.19070 F1800.000 ; infill
 G1 X105.579 Y117.930 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.20887 F1800.000 ; infill
 G1 X104.413 Y110.364 E5.41804 ; infill
 G1 X102.427 Y97.969 F12000.000 ; move to first infill point
 G1 X98.594 Y74.053 E6.94282 F1800.000 ; infill
 G1 X98.594 Y74.053 F12000.000 ; move to first infill point
 G1 X97.962 Y70.107 E7.06146 F1800.000 ; infill
 G1 X94.434 Y69.008 F12000.000 ; move to first infill point
 G1 X94.434 Y65.846 E7.22053 F7200.000 ; infill
 G1 X93.829 Y65.846 E7.25097 ; infill
 G1 X93.829 Y69.008 E7.41005 ; infill
 G1 X93.224 Y69.008 E7.44049 ; infill
 G1 X93.224 Y65.846 E7.59957 ; infill
 G1 X92.619 Y65.846 E7.63001 ; infill
 G1 X92.619 Y69.008 E7.78908 ; infill
 G1 F9600
 G1 X92.619 Y65.846 E7.03812 ; wipe and retract
 G1 F9600
 G1 X93.224 Y65.846 E6.89442 ; wipe and retract
 G1 F9600
 G1 X93.224 Y69.008 E6.14346 ; wipe and retract
 G1 F9600
 G1 X93.829 Y69.008 E5.99976 ; wipe and retract
 G1 F9600
 G1 X93.829 Y65.846 E5.24880 ; wipe and retract
 G1 F9600
 G1 X94.434 Y65.846 E5.10510 ; wipe and retract
 G1 F9600
 G1 X94.434 Y69.008 E4.35414 ; wipe and retract
 G1 E2.78908 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.000 F12000.000 ; lift Z
 G1 X96.608 Y62.190 F12000.000 ; move to first perimeter point
 G1 Z10.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X90.488 Y62.190 E5.18172 F7200.000 ; perimeter
 G1 X90.507 Y59.215 E5.27007 ; perimeter
 G1 X96.608 Y59.215 E5.45122 ; perimeter
 G1 X96.608 Y62.130 E5.53779 ; perimeter
 G1 X96.262 Y61.990 F12000.000 ; move inwards before travel
 G1 X96.251 Y61.833 F12000.000 ; move to first perimeter point
 G1 X90.847 Y61.833 E5.69824 F7200.000 ; perimeter
 G1 X90.862 Y59.572 E5.76538 ; perimeter
 G1 X96.251 Y59.572 E5.92540 ; perimeter
 G1 X96.251 Y61.773 E5.99076 ; perimeter
 G1 X95.894 Y61.476 F12000.000 ; move to first perimeter point
 G1 X91.206 Y61.476 E6.12994 F7200.000 ; perimeter
 G1 X91.216 Y59.929 E6.17588 ; perimeter
 G1 X95.894 Y59.929 E6.31476 ; perimeter
 G1 X95.894 Y61.416 E6.35891 ; perimeter
 G1 X95.537 Y61.119 F12000.000 ; move to first perimeter point
 G1 X91.566 Y61.119 E6.47682 F7200.000 ; perimeter
 G1 X91.571 Y60.286 E6.50155 ; perimeter
 G1 X95.537 Y60.286 E6.61930 ; perimeter
 G1 X95.537 Y61.059 E6.64225 ; perimeter
 G1 X95.358 Y60.702 F12000.000 ; move to first infill point
 G1 X91.747 Y60.702 E6.86958 F1800.000 ; infill
 G1 F9600
 G1 X95.358 Y60.702 E6.01191 ; wipe and retract
 G1 E1.86958 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.000 F12000.000 ; lift Z
 G1 X96.608 Y69.215 F12000.000 ; move to first perimeter point
 G1 Z10.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.811 Y69.215 E5.06541 F7200.000 ; perimeter
 G1 X107.942 Y123.815 E6.70907 ; perimeter
 G1 X95.608 Y123.815 E7.07527 ; perimeter
 G1 X95.608 Y132.215 E7.32468 ; perimeter
 G1 X109.346 Y132.215 E7.73258 ; perimeter
 G1 X109.992 Y136.074 E7.84876 ; perimeter
 G1 X109.992 Y137.923 E7.90365 ; perimeter
 G1 X109.148 Y139.531 E7.95757 ; perimeter
 G1 X107.653 Y140.562 E8.01149 ; perimeter
 G1 X105.814 Y140.785 E8.06651 ; perimeter
 G1 X93.363 Y140.785 E8.43620 ; perimeter
 G1 X91.653 Y140.137 E8.49050 ; perimeter
 G1 X90.449 Y138.778 E8.54441 ; perimeter
 G1 X90.008 Y136.991 E8.59905 ; perimeter
 G1 X90.478 Y63.639 E10.77701 ; perimeter
 G1 X96.608 Y63.639 E10.95901 ; perimeter
 G1 X96.608 Y69.155 E11.12277 ; perimeter
 G1 X96.608 Y69.615 F12000.000 ; move inwards before travel
 G1 X96.251 Y69.572 F12000.000 ; move to first perimeter point
 G1 X98.509 Y69.572 E11.18980 F7200.000 ; perimeter
 G1 X107.520 Y123.458 E12.81196 ; perimeter
 G1 X95.251 Y123.458 E13.17624 ; perimeter
 G1 X95.251 Y132.572 E13.44685 ; perimeter
 G1 X98.451 Y132.572 E13.54187 ; perimeter
 G1 X98.451 Y136.372 E13.65469 ; perimeter
 G1 X105.165 Y136.372 E13.85405 ; perimeter
 G1 X105.165 Y132.572 E13.96687 ; perimeter
 G1 X109.044 Y132.572 E14.08204 ; perimeter
 G1 X109.635 Y136.104 E14.18837 ; perimeter
 G1 X109.635 Y137.835 E14.23976 ; perimeter
 G1 X108.873 Y139.287 E14.28845 ; perimeter
 G1 X107.523 Y140.218 E14.33715 ; perimeter
 G1 X105.792 Y140.428 E14.38891 ; perimeter
 G1 X93.428 Y140.428 E14.75602 ; perimeter
 G1 X91.862 Y139.834 E14.80576 ; perimeter
 G1 X90.774 Y138.607 E14.85445 ; perimeter
 G1 X90.366 Y136.949 E14.90515 ; perimeter
 G1 X90.833 Y63.996 E17.07125 ; perimeter
 G1 X96.251 Y63.996 E17.23211 ; perimeter
 G1 X96.251 Y69.512 E17.39588 ; perimeter
 G1 X95.894 Y69.929 F12000.000 ; move to first perimeter point
 G1 X98.206 Y69.929 E17.46454 F7200.000 ; perimeter
 G1 X107.098 Y123.100 E19.06520 ; perimeter
 G1 X94.894 Y123.100 E19.42756 ; perimeter
 G1 X94.894 Y132.929 E19.71937 ; perimeter
 G1 X98.094 Y132.929 E19.81439 ; perimeter
 G1 X98.094 Y136.729 E19.92721 ; perimeter
 G1 X105.522 Y136.729 E20.14777 ; perimeter
 G1 X105.522 Y132.929 E20.26060 ; perimeter
 G1 X108.742 Y132.929 E20.35619 ; perimeter
 G1 X109.278 Y136.133 E20.45265 ; perimeter
 G1 X109.278 Y137.747 E20.50056 ; perimeter
 G1 X108.597 Y139.043 E20.54402 ; perimeter
 G1 X107.393 Y139.874 E20.58749 ; perimeter
 G1 X105.771 Y140.071 E20.63600 ; perimeter
 G1 X93.493 Y140.071 E21.00052 ; perimeter
 G1 X92.071 Y139.532 E21.04571 ; perimeter
 G1 X91.100 Y138.436 E21.08917 ; perimeter
 G1 X90.723 Y136.906 E21.13594 ; perimeter
 G1 X91.188 Y64.353 E23.29018 ; perimeter
 G1 X95.894 Y64.353 E23.42991 ; perimeter
 G1 X95.894 Y69.869 E23.59367 ; perimeter
 G1 X91.819 Y69.943 F12000.000 ; move to first perimeter point
 G1 X91.536 Y118.153 E25.02509 F7200.000 ; perimeter
 G1 X91.886 Y119.700 E25.07220 ; perimeter
 G1 X92.975 Y121.041 E25.12349 ; perimeter
 G1 X94.490 Y121.668 E25.17219 ; perimeter
 G1 X101.702 Y121.668 E25.38631 ; perimeter
 G1 X103.161 Y121.475 E25.43002 ; perimeter
 G1 X104.541 Y120.436 E25.48131 ; perimeter
 G1 X105.290 Y118.879 E25.53261 ; perimeter
 G1 X105.290 Y117.343 E25.57821 ; perimeter
 G1 X102.350 Y98.162 E26.15437 ; perimeter
 G1 X102.560 Y98.128 E26.16069 ; perimeter
 G1 X106.677 Y122.743 E26.90169 ; perimeter
 G1 X94.537 Y122.743 E27.26213 ; perimeter
 G1 X94.537 Y133.286 E27.57515 ; perimeter
 G1 X97.737 Y133.286 E27.67016 ; perimeter
 G1 X97.737 Y137.086 E27.78299 ; perimeter
 G1 X105.879 Y137.086 E28.02475 ; perimeter
 G1 X105.879 Y133.286 E28.13758 ; perimeter
 G1 X108.440 Y133.286 E28.21359 ; perimeter
 G1 X108.921 Y136.163 E28.30020 ; perimeter
 G1 X108.921 Y137.659 E28.34461 ; perimeter
 G1 X108.322 Y138.799 E28.38285 ; perimeter
 G1 X107.262 Y139.530 E28.42109 ; perimeter
 G1 X105.749 Y139.714 E28.46634 ; perimeter
 G1 X93.559 Y139.714 E28.82828 ; perimeter
 G1 X92.280 Y139.229 E28.86891 ; perimeter
 G1 X91.426 Y138.265 E28.90715 ; perimeter
 G1 X91.080 Y136.864 E28.94998 ; perimeter
 G1 X91.543 Y64.710 E31.09237 ; perimeter
 G1 X95.537 Y64.710 E31.21096 ; perimeter
 G1 X95.537 Y69.943 E31.36633 ; perimeter
 G1 X91.879 Y69.943 E31.47493 ; perimeter
 G1 X91.869 Y69.586 F12000.000 ; move to first perimeter point
 G1 X91.898 Y65.067 E31.60910 F7200.000 ; perimeter
 G1 X95.180 Y65.067 E31.70655 ; perimeter
 G1 X95.180 Y69.586 E31.84072 ; perimeter
 G1 X91.929 Y69.586 E31.93725 ; perimeter
 G1 X92.228 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.252 Y65.425 E32.05022 F7200.000 ; perimeter
 G1 X94.823 Y65.425 E32.12654 ; perimeter
 G1 X94.823 Y69.229 E32.23950 ; perimeter
 G1 X92.288 Y69.229 E32.31476 ; perimeter
 G1 F9600
 G1 X92.252 Y65.425 E31.41110 ; wipe and retract
 G1 F9600
 G1 X94.823 Y65.425 E30.80067 ; wipe and retract
 G1 F9600
 G1 X94.823 Y69.229 E29.89705 ; wipe and retract
 G1 F9600
 G1 X92.288 Y69.229 E29.29507 ; wipe and retract
 G1 E27.31476 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.200 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z10.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X106.236 Y137.443 E5.80503 ; perimeter
 G1 X106.236 Y133.643 E5.91785 ; perimeter
 G1 X108.137 Y133.643 E5.97429 ; perimeter
 G1 X108.564 Y136.193 E6.05104 ; perimeter
 G1 X108.564 Y137.571 E6.09196 ; perimeter
 G1 X108.047 Y138.555 E6.12497 ; perimeter
 G1 X107.132 Y139.187 E6.15798 ; perimeter
 G1 X105.728 Y139.357 E6.19998 ; perimeter
 G1 X93.624 Y139.357 E6.55934 ; perimeter
 G1 X92.488 Y138.926 E6.59541 ; perimeter
 G1 X91.751 Y138.094 E6.62842 ; perimeter
 G1 X91.438 Y136.822 E6.66732 ; perimeter
 G1 X91.546 Y119.849 E7.17128 ; perimeter
 G1 X92.754 Y121.337 E7.22818 ; perimeter
 G1 X94.419 Y122.025 E7.28168 ; perimeter
 G1 X101.725 Y122.025 E7.49860 ; perimeter
 G1 X103.301 Y121.817 E7.54579 ; perimeter
 G1 X104.825 Y120.669 E7.60245 ; perimeter
 G1 X105.561 Y119.141 E7.65279 ; perimeter
 G1 X105.716 Y119.163 E7.65745 ; perimeter
 G1 X106.255 Y122.386 E7.75447 ; perimeter
 G1 X94.240 Y122.386 E8.11121 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E8.11579 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E8.16422 ; perimeter
 G1 X105.394 Y120.311 E8.18370 ; perimeter
 G1 X105.549 Y120.333 E8.18835 ; perimeter
 G1 X105.833 Y122.029 E8.23942 ; perimeter
 G1 X103.916 Y122.029 E8.29635 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E8.25304 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.86568 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E7.70986 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E7.67261 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E7.26411 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.80871 ; wipe and retract
 G1 E3.29635 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.200 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z10.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X106.593 Y137.800 E5.49201 ; perimeter
 G1 X106.593 Y134.000 E5.60483 ; perimeter
 G1 X107.835 Y134.000 E5.64169 ; perimeter
 G1 X108.207 Y136.222 E5.70859 ; perimeter
 G1 X108.207 Y137.482 E5.74601 ; perimeter
 G1 X107.772 Y138.311 E5.77380 ; perimeter
 G1 X107.001 Y138.843 E5.80158 ; perimeter
 G1 X105.706 Y139.000 E5.84033 ; perimeter
 G1 X93.690 Y139.000 E6.19710 ; perimeter
 G1 X92.697 Y138.624 E6.22862 ; perimeter
 G1 X92.077 Y137.923 E6.25640 ; perimeter
 G1 X91.795 Y136.780 E6.29137 ; perimeter
 G1 X91.897 Y120.847 E6.76443 ; perimeter
 G1 X92.534 Y121.632 E6.79444 ; perimeter
 G1 X93.823 Y122.165 E6.83584 ; perimeter
 G1 X93.823 Y133.940 E7.18545 ; perimeter
 G1 F9600
 G1 X97.023 Y134.000 E6.42532 ; wipe and retract
 G1 F9600
 G1 X97.023 Y137.800 E5.52282 ; wipe and retract
 G1 F9600
 G1 X106.593 Y137.800 E3.24976 ; wipe and retract
 G1 F9600
 G1 X106.593 Y134.371 E2.43545 ; wipe and retract
 G1 E2.18545 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.200 F12000.000 ; lift Z
 G1 X92.884 Y71.015 F12000.000 ; move to first perimeter point
 G1 Z10.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.105 Y71.015 E5.12531 F7200.000 ; perimeter
 G1 X104.219 Y117.425 E6.51939 ; perimeter
 G1 X104.219 Y118.635 E6.55531 ; perimeter
 G1 X103.689 Y119.737 E6.59162 ; perimeter
 G1 X102.742 Y120.450 E6.62683 ; perimeter
 G1 X101.631 Y120.597 E6.66009 ; perimeter
 G1 X94.703 Y120.597 E6.86579 ; perimeter
 G1 X93.635 Y120.155 E6.90011 ; perimeter
 G1 X92.875 Y119.220 E6.93589 ; perimeter
 G1 X92.608 Y118.036 E6.97191 ; perimeter
 G1 X92.884 Y71.075 E8.36629 ; perimeter
 G1 X92.885 Y70.615 F12000.000 ; move inwards before travel
 G1 X92.529 Y70.658 F12000.000 ; move to first perimeter point
 G1 X97.411 Y70.658 E8.51124 F7200.000 ; perimeter
 G1 X104.576 Y117.398 E9.91523 ; perimeter
 G1 X104.576 Y118.716 E9.95438 ; perimeter
 G1 X103.973 Y119.970 E9.99568 ; perimeter
 G1 X102.881 Y120.792 E10.03626 ; perimeter
 G1 X101.655 Y120.954 E10.07300 ; perimeter
 G1 X94.632 Y120.954 E10.28150 ; perimeter
 G1 X93.415 Y120.451 E10.32062 ; perimeter
 G1 X92.545 Y119.380 E10.36157 ; perimeter
 G1 X92.251 Y118.075 E10.40129 ; perimeter
 G1 X92.529 Y70.718 E11.80742 ; perimeter
 G1 X92.174 Y70.300 F12000.000 ; move to first perimeter point
 G1 X97.718 Y70.300 E11.97201 F7200.000 ; perimeter
 G1 X104.933 Y117.371 E13.38591 ; perimeter
 G1 X104.933 Y118.797 E13.42828 ; perimeter
 G1 X104.257 Y120.203 E13.47458 ; perimeter
 G1 X103.021 Y121.133 E13.52051 ; perimeter
 G1 X101.678 Y121.311 E13.56074 ; perimeter
 G1 X94.561 Y121.311 E13.77205 ; perimeter
 G1 X93.195 Y120.746 E13.81596 ; perimeter
 G1 X92.216 Y119.540 E13.86208 ; perimeter
 G1 X91.893 Y118.114 E13.90549 ; perimeter
 G1 X92.174 Y70.360 E15.32338 ; perimeter
 G1 F9600
 G1 X97.718 Y70.300 E14.00664 ; wipe and retract
 G1 F9600
 G1 X99.908 Y84.589 E10.57338 ; wipe and retract
 G1 E10.32338 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.200 F12000.000 ; lift Z
 G1 X98.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z10.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X104.808 Y133.015 E5.17815 F7200.000 ; perimeter
 G1 X104.808 Y136.015 E5.26722 ; perimeter
 G1 X98.808 Y136.015 E5.44537 ; perimeter
 G1 X98.808 Y133.075 E5.53266 ; perimeter
 G1 X98.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X104.987 Y132.615 E5.93285 F1800.000 ; infill
 G1 X107.726 Y134.586 F12000.000 ; move to first infill point
 G1 X106.795 Y134.586 E5.97739 F7200.000 ; infill
 G1 X106.795 Y135.161 E6.00489 ; infill
 G1 X107.823 Y135.161 E6.05403 ; infill
 G1 X107.919 Y135.736 E6.08192 ; infill
 G1 X106.795 Y135.736 E6.13566 ; infill
 G1 X106.795 Y136.311 E6.16316 ; infill
 G1 X107.985 Y136.311 E6.22008 ; infill
 G1 X107.985 Y136.886 E6.24758 ; infill
 G1 X106.795 Y136.886 E6.30450 ; infill
 G1 X106.795 Y137.461 E6.33200 ; infill
 G1 X107.969 Y137.461 E6.38812 ; infill
 G1 X107.667 Y138.036 E6.41918 ; infill
 G1 X106.795 Y138.036 E6.46087 ; infill
 G1 X106.015 Y138.612 E6.50720 ; infill
 G1 X93.538 Y138.612 E7.10389 ; infill
 G1 X96.821 Y138.036 F12000.000 ; move to first infill point
 G1 X92.502 Y138.036 E7.31042 F7200.000 ; infill
 G1 X92.175 Y137.461 E7.34205 ; infill
 G1 X96.821 Y137.461 E7.56422 ; infill
 G1 X96.821 Y136.886 E7.59172 ; infill
 G1 X92.034 Y136.886 E7.82067 ; infill
 G1 X92.017 Y136.311 E7.84818 ; infill
 G1 X96.821 Y136.311 E8.07794 ; infill
 G1 X96.821 Y135.736 E8.10544 ; infill
 G1 X92.017 Y135.736 E8.33519 ; infill
 G1 X92.017 Y135.161 E8.36270 ; infill
 G1 X96.821 Y135.161 E8.59245 ; infill
 G1 X96.821 Y134.586 E8.61995 ; infill
 G1 X92.017 Y134.586 E8.84971 ; infill
 G1 X93.621 Y134.011 F12000.000 ; move to first infill point
 G1 X92.017 Y134.011 E8.92644 F7200.000 ; infill
 G1 X92.018 Y133.436 E8.95394 ; infill
 G1 X93.621 Y133.436 E9.03062 ; infill
 G1 X93.621 Y132.860 E9.05812 ; infill
 G1 X92.022 Y132.860 E9.13462 ; infill
 G1 X92.025 Y132.285 E9.16212 ; infill
 G1 X93.621 Y132.285 E9.23845 ; infill
 G1 X93.621 Y131.710 E9.26595 ; infill
 G1 X92.029 Y131.710 E9.34210 ; infill
 G1 X92.033 Y131.135 E9.36960 ; infill
 G1 X93.621 Y131.135 E9.44557 ; infill
 G1 X93.621 Y130.560 E9.47307 ; infill
 G1 X92.036 Y130.560 E9.54887 ; infill
 G1 X92.040 Y129.985 E9.57637 ; infill
 G1 X93.621 Y129.985 E9.65199 ; infill
 G1 X93.621 Y129.410 E9.67949 ; infill
 G1 X92.044 Y129.410 E9.75493 ; infill
 G1 X92.047 Y128.835 E9.78244 ; infill
 G1 X93.621 Y128.835 E9.85770 ; infill
 G1 X93.621 Y128.260 E9.88520 ; infill
 G1 X92.051 Y128.260 E9.96029 ; infill
 G1 X92.055 Y127.685 E9.98780 ; infill
 G1 X93.621 Y127.685 E10.06271 ; infill
 G1 X93.621 Y127.109 E10.09021 ; infill
 G1 X92.058 Y127.109 E10.16495 ; infill
 G1 X92.062 Y126.534 E10.19245 ; infill
 G1 X93.621 Y126.534 E10.26701 ; infill
 G1 X93.621 Y125.959 E10.29451 ; infill
 G1 X92.066 Y125.959 E10.36890 ; infill
 G1 X92.069 Y125.384 E10.39640 ; infill
 G1 X93.621 Y125.384 E10.47061 ; infill
 G1 X93.621 Y124.809 E10.49811 ; infill
 G1 X92.073 Y124.809 E10.57214 ; infill
 G1 X92.077 Y124.234 E10.59965 ; infill
 G1 X93.621 Y124.234 E10.67350 ; infill
 G1 X93.621 Y123.659 E10.70100 ; infill
 G1 X92.081 Y123.659 E10.77468 ; infill
 G1 X92.084 Y123.084 E10.80219 ; infill
 G1 X93.621 Y123.084 E10.87569 ; infill
 G1 X93.621 Y122.509 E10.90319 ; infill
 G1 X92.088 Y122.509 E10.97652 ; infill
 G1 X92.092 Y121.934 E11.00402 ; infill
 G1 X92.472 Y121.934 E11.02219 ; infill
 G1 X91.703 Y119.744 F12000.000 ; move to first infill point
 G1 X91.491 Y119.308 E11.03659 F1800.000 ; infill
 G1 X91.388 Y118.357 E11.06499 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E10.83778 ; wipe and retract
 G1 F9600
 G1 X91.703 Y119.744 E10.72263 ; wipe and retract
 G1 E6.06499 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.200 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z10.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X105.107 Y121.240 F12000.000 ; move to first infill point
 G1 X105.494 Y121.240 E5.07167 F7200.000 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.930 E5.13770 F1800.000 ; infill
 G1 X105.579 Y117.930 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.15587 F1800.000 ; infill
 G1 X104.413 Y110.364 E5.36505 ; infill
 G1 X102.427 Y97.969 F12000.000 ; move to first infill point
 G1 X98.594 Y74.053 E6.88982 F1800.000 ; infill
 G1 X98.594 Y74.053 F12000.000 ; move to first infill point
 G1 X97.962 Y70.107 E7.00846 F1800.000 ; infill
 G1 X94.601 Y68.841 F12000.000 ; move to first infill point
 G1 X92.452 Y68.841 E7.11669 F7200.000 ; infill
 G1 X92.452 Y68.235 E7.14718 ; infill
 G1 X94.601 Y68.235 E7.25540 ; infill
 G1 X94.601 Y67.630 E7.28589 ; infill
 G1 X92.452 Y67.630 E7.39411 ; infill
 G1 X92.452 Y67.024 E7.42460 ; infill
 G1 X94.601 Y67.024 E7.53282 ; infill
 G1 X94.601 Y66.419 E7.56331 ; infill
 G1 X92.452 Y66.419 E7.67154 ; infill
 G1 X92.452 Y65.813 E7.70202 ; infill
 G1 X94.601 Y65.813 E7.81025 ; infill
 G1 F9600
 G1 X92.452 Y65.813 E7.29977 ; wipe and retract
 G1 F9600
 G1 X92.452 Y66.419 E7.15595 ; wipe and retract
 G1 F9600
 G1 X94.601 Y66.419 E6.64548 ; wipe and retract
 G1 F9600
 G1 X94.601 Y67.024 E6.50166 ; wipe and retract
 G1 F9600
 G1 X92.452 Y67.024 E5.99118 ; wipe and retract
 G1 F9600
 G1 X92.452 Y67.630 E5.84737 ; wipe and retract
 G1 F9600
 G1 X94.601 Y67.630 E5.33689 ; wipe and retract
 G1 F9600
 G1 X94.601 Y68.235 E5.19307 ; wipe and retract
 G1 F9600
 G1 X92.452 Y68.235 E4.68259 ; wipe and retract
 G1 F9600
 G1 X92.452 Y68.841 E4.53878 ; wipe and retract
 G1 F9600
 G1 X94.601 Y68.841 E4.02830 ; wipe and retract
 G1 E2.81025 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.200 F12000.000 ; lift Z
 G1 X96.608 Y62.390 F12000.000 ; move to first perimeter point
 G1 Z10.200 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X90.486 Y62.390 E5.18176 F7200.000 ; perimeter
 G1 X90.507 Y59.215 E5.27605 ; perimeter
 G1 X96.608 Y59.215 E5.45720 ; perimeter
 G1 X96.608 Y62.330 E5.54970 ; perimeter
 G1 X96.262 Y62.190 F12000.000 ; move inwards before travel
 G1 X96.251 Y62.033 F12000.000 ; move to first perimeter point
 G1 X90.846 Y62.033 E5.71019 F7200.000 ; perimeter
 G1 X90.862 Y59.572 E5.78327 ; perimeter
 G1 X96.251 Y59.572 E5.94329 ; perimeter
 G1 X96.251 Y61.973 E6.01459 ; perimeter
 G1 X95.894 Y61.676 F12000.000 ; move to first perimeter point
 G1 X91.205 Y61.676 E6.15380 F7200.000 ; perimeter
 G1 X91.216 Y59.929 E6.20568 ; perimeter
 G1 X95.894 Y59.929 E6.34456 ; perimeter
 G1 X95.894 Y61.616 E6.39466 ; perimeter
 G1 X95.537 Y61.319 F12000.000 ; move to first perimeter point
 G1 X91.565 Y61.319 E6.51260 F7200.000 ; perimeter
 G1 X91.571 Y60.286 E6.54327 ; perimeter
 G1 X95.537 Y60.286 E6.66101 ; perimeter
 G1 X95.537 Y61.259 E6.68990 ; perimeter
 G1 X95.180 Y60.962 F12000.000 ; move to first perimeter point
 G1 X91.924 Y60.962 E6.78657 F7200.000 ; perimeter
 G1 X91.926 Y60.643 E6.79604 ; perimeter
 G1 X95.180 Y60.643 E6.89265 ; perimeter
 G1 X95.180 Y60.902 E6.90034 ; perimeter
 M106 S232.05 ; enable fan
 G1 F9600
 G1 X91.924 Y60.962 E6.12695 ; wipe and retract
 G1 F9600
 G1 X91.926 Y60.643 E6.05122 ; wipe and retract
 G1 F9600
 G1 X95.180 Y60.643 E5.27845 ; wipe and retract
 G1 F9600
 G1 X95.180 Y60.902 E5.21697 ; wipe and retract
 G1 E1.90034 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.200 F12000.000 ; lift Z
 G1 X96.608 Y69.215 F12000.000 ; move to first perimeter point
 G1 Z10.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X98.811 Y69.215 E5.06541 F7200.000 ; perimeter
 G1 X107.942 Y123.815 E6.70907 ; perimeter
 G1 X95.608 Y123.815 E7.07527 ; perimeter
 G1 X95.608 Y132.215 E7.32468 ; perimeter
 G1 X109.346 Y132.215 E7.73258 ; perimeter
 G1 X109.992 Y136.074 E7.84876 ; perimeter
 G1 X109.992 Y137.923 E7.90365 ; perimeter
 G1 X109.148 Y139.531 E7.95757 ; perimeter
 G1 X107.653 Y140.562 E8.01149 ; perimeter
 G1 X105.814 Y140.785 E8.06651 ; perimeter
 G1 X93.363 Y140.785 E8.43620 ; perimeter
 G1 X91.653 Y140.137 E8.49050 ; perimeter
 G1 X90.449 Y138.778 E8.54441 ; perimeter
 G1 X90.008 Y136.991 E8.59905 ; perimeter
 G1 X90.481 Y63.239 E10.78889 ; perimeter
 M106 S255 ; enable fan
 G1 X90.484 Y62.790 E10.81235 F1680.000 ; perimeter
 M106 S232.05 ; enable fan
 G1 X90.507 Y59.215 E10.91851 F7200.000 ; perimeter
 G1 X96.608 Y59.215 E11.09966 ; perimeter
 G1 X96.608 Y62.790 E11.20583 ; perimeter
 M106 S255 ; enable fan
 G1 X96.608 Y63.239 E11.22929 F1680.000 ; perimeter
 M106 S232.05 ; enable fan
 G1 X96.608 Y69.155 E11.40492 F7200.000 ; perimeter
 G1 X96.608 Y69.615 F12000.000 ; move inwards before travel
 G1 X96.251 Y69.572 F12000.000 ; move to first perimeter point
 G1 X98.509 Y69.572 E11.47196 F7200.000 ; perimeter
 G1 X107.520 Y123.458 E13.09412 ; perimeter
 G1 X95.251 Y123.458 E13.45840 ; perimeter
 G1 X95.251 Y132.572 E13.72901 ; perimeter
 G1 X98.451 Y132.572 E13.82402 ; perimeter
 G1 X98.451 Y136.372 E13.93685 ; perimeter
 G1 X105.165 Y136.372 E14.13620 ; perimeter
 G1 X105.165 Y132.572 E14.24903 ; perimeter
 G1 X109.044 Y132.572 E14.36420 ; perimeter
 G1 X109.635 Y136.104 E14.47052 ; perimeter
 G1 X109.635 Y137.835 E14.52192 ; perimeter
 G1 X108.873 Y139.287 E14.57061 ; perimeter
 G1 X107.523 Y140.218 E14.61930 ; perimeter
 G1 X105.792 Y140.428 E14.67107 ; perimeter
 G1 X93.428 Y140.428 E15.03818 ; perimeter
 G1 X91.862 Y139.834 E15.08791 ; perimeter
 G1 X90.774 Y138.607 E15.13660 ; perimeter
 G1 X90.366 Y136.949 E15.18731 ; perimeter
 G1 X90.838 Y63.239 E17.37589 ; perimeter
 M106 S255 ; enable fan
 G1 X90.841 Y62.790 E17.39935 F1680.000 ; perimeter
 M106 S232.05 ; enable fan
 G1 X90.862 Y59.572 E17.49491 F7200.000 ; perimeter
 G1 X96.251 Y59.572 E17.65493 ; perimeter
 G1 X96.251 Y62.790 E17.75049 ; perimeter
 M106 S255 ; enable fan
 G1 X96.251 Y63.239 E17.77395 F1680.000 ; perimeter
 M106 S232.05 ; enable fan
 G1 X96.251 Y69.512 E17.96019 F7200.000 ; perimeter
 G1 X95.894 Y69.929 F12000.000 ; move to first perimeter point
 G1 X98.206 Y69.929 E18.02885 F7200.000 ; perimeter
 G1 X107.098 Y123.100 E19.62950 ; perimeter
 G1 X94.894 Y123.100 E19.99187 ; perimeter
 G1 X94.894 Y132.929 E20.28368 ; perimeter
 G1 X98.094 Y132.929 E20.37869 ; perimeter
 G1 X98.094 Y136.729 E20.49152 ; perimeter
 G1 X105.522 Y136.729 E20.71208 ; perimeter
 G1 X105.522 Y132.929 E20.82490 ; perimeter
 G1 X108.742 Y132.929 E20.92050 ; perimeter
 G1 X109.278 Y136.133 E21.01696 ; perimeter
 G1 X109.278 Y137.747 E21.06487 ; perimeter
 G1 X108.597 Y139.043 E21.10833 ; perimeter
 G1 X107.393 Y139.874 E21.15180 ; perimeter
 G1 X105.771 Y140.071 E21.20031 ; perimeter
 G1 X93.493 Y140.071 E21.56483 ; perimeter
 G1 X92.071 Y139.532 E21.61001 ; perimeter
 G1 X91.100 Y138.436 E21.65348 ; perimeter
 G1 X90.723 Y136.906 E21.70025 ; perimeter
 G1 X91.195 Y63.239 E23.88757 ; perimeter
 M106 S255 ; enable fan
 G1 X91.198 Y62.790 E23.91103 F1680.000 ; perimeter
 M106 S232.05 ; enable fan
 G1 X91.216 Y59.929 E23.99599 F7200.000 ; perimeter
 G1 X95.894 Y59.929 E24.13487 ; perimeter
 G1 X95.894 Y62.790 E24.21983 ; perimeter
 M106 S255 ; enable fan
 G1 X95.894 Y63.239 E24.24329 F1680.000 ; perimeter
 M106 S232.05 ; enable fan
 G1 X95.894 Y69.869 E24.44013 F7200.000 ; perimeter
 G1 X91.819 Y69.943 F12000.000 ; move to first perimeter point
 G1 X91.536 Y118.153 E25.87156 F7200.000 ; perimeter
 G1 X91.886 Y119.700 E25.91866 ; perimeter
 G1 X92.975 Y121.041 E25.96995 ; perimeter
 G1 X94.490 Y121.668 E26.01866 ; perimeter
 G1 X101.702 Y121.668 E26.23277 ; perimeter
 G1 X103.161 Y121.475 E26.27648 ; perimeter
 G1 X104.541 Y120.436 E26.32778 ; perimeter
 G1 X105.290 Y118.879 E26.37908 ; perimeter
 G1 X105.290 Y117.343 E26.42467 ; perimeter
 G1 X102.350 Y98.162 E27.00084 ; perimeter
 G1 X102.560 Y98.128 E27.00716 ; perimeter
 G1 X106.677 Y122.743 E27.74815 ; perimeter
 G1 X94.537 Y122.743 E28.10859 ; perimeter
 G1 X94.537 Y133.286 E28.42161 ; perimeter
 G1 X97.737 Y133.286 E28.51663 ; perimeter
 G1 X97.737 Y137.086 E28.62945 ; perimeter
 G1 X105.879 Y137.086 E28.87121 ; perimeter
 G1 X105.879 Y133.286 E28.98404 ; perimeter
 G1 X108.440 Y133.286 E29.06006 ; perimeter
 G1 X108.921 Y136.163 E29.14666 ; perimeter
 G1 X108.921 Y137.659 E29.19107 ; perimeter
 G1 X108.322 Y138.799 E29.22931 ; perimeter
 G1 X107.262 Y139.530 E29.26755 ; perimeter
 G1 X105.749 Y139.714 E29.31281 ; perimeter
 G1 X93.559 Y139.714 E29.67475 ; perimeter
 G1 X92.280 Y139.229 E29.71537 ; perimeter
 G1 X91.426 Y138.265 E29.75361 ; perimeter
 G1 X91.080 Y136.864 E29.79645 ; perimeter
 G1 X91.552 Y63.239 E31.98252 ; perimeter
 M106 S255 ; enable fan
 G1 X91.555 Y62.790 E32.00598 F1680.000 ; perimeter
 M106 S232.05 ; enable fan
 G1 X91.571 Y60.286 E32.08033 F7200.000 ; perimeter
 G1 X95.537 Y60.286 E32.19808 ; perimeter
 G1 X95.537 Y62.790 E32.27243 ; perimeter
 M106 S255 ; enable fan
 G1 X95.537 Y63.239 E32.29589 F1680.000 ; perimeter
 M106 S232.05 ; enable fan
 G1 X95.537 Y69.943 E32.49495 F7200.000 ; perimeter
 G1 X91.879 Y69.943 E32.60355 ; perimeter
 G1 X91.869 Y69.586 F12000.000 ; move to first perimeter point
 G1 X91.909 Y63.239 E32.79201 F7200.000 ; perimeter
 M106 S255 ; enable fan
 G1 X91.912 Y62.790 E32.81547 F7200.000 ; perimeter
 M106 S232.05 ; enable fan
 G1 X91.926 Y60.643 E32.87922 F7200.000 ; perimeter
 G1 X95.180 Y60.643 E32.97583 ; perimeter
 G1 X95.180 Y62.790 E33.03958 ; perimeter
 M106 S255 ; enable fan
 G1 X95.180 Y63.239 E33.06304 F7200.000 ; perimeter
 M106 S232.05 ; enable fan
 G1 X95.180 Y69.586 E33.25150 F7200.000 ; perimeter
 G1 X91.929 Y69.586 E33.34803 ; perimeter
 G1 X92.228 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.266 Y63.239 E33.52588 F7200.000 ; perimeter
 M106 S255 ; enable fan
 G1 X92.269 Y62.790 E33.54934 F7200.000 ; perimeter
 M106 S232.05 ; enable fan
 G1 X92.281 Y61.000 E33.60250 F7200.000 ; perimeter
 G1 X94.823 Y61.000 E33.67797 ; perimeter
 G1 X94.823 Y62.790 E33.73112 ; perimeter
 M106 S255 ; enable fan
 G1 X94.823 Y63.239 E33.75458 F7200.000 ; perimeter
 M106 S232.05 ; enable fan
 G1 X94.823 Y69.229 E33.93243 F7200.000 ; perimeter
 G1 X92.288 Y69.229 E34.00769 ; perimeter
 G1 F9600
 G1 X92.266 Y63.239 E32.58503 ; wipe and retract
 G1 E29.00769 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.400 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z10.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X106.236 Y137.443 E5.80503 ; perimeter
 G1 X106.236 Y133.643 E5.91785 ; perimeter
 G1 X108.137 Y133.643 E5.97429 ; perimeter
 G1 X108.564 Y136.193 E6.05104 ; perimeter
 G1 X108.564 Y137.571 E6.09196 ; perimeter
 G1 X108.047 Y138.555 E6.12497 ; perimeter
 G1 X107.132 Y139.187 E6.15798 ; perimeter
 G1 X105.728 Y139.357 E6.19998 ; perimeter
 G1 X93.624 Y139.357 E6.55934 ; perimeter
 G1 X92.488 Y138.926 E6.59541 ; perimeter
 G1 X91.751 Y138.094 E6.62842 ; perimeter
 G1 X91.438 Y136.822 E6.66732 ; perimeter
 G1 X91.546 Y119.849 E7.17128 ; perimeter
 G1 X92.754 Y121.337 E7.22818 ; perimeter
 G1 X94.419 Y122.025 E7.28168 ; perimeter
 G1 X101.725 Y122.025 E7.49860 ; perimeter
 G1 X103.301 Y121.817 E7.54579 ; perimeter
 G1 X104.825 Y120.669 E7.60245 ; perimeter
 G1 X105.561 Y119.141 E7.65279 ; perimeter
 G1 X105.716 Y119.163 E7.65745 ; perimeter
 G1 X106.255 Y122.386 E7.75447 ; perimeter
 G1 X94.240 Y122.386 E8.11121 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E8.11579 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E8.16422 ; perimeter
 G1 X105.394 Y120.311 E8.18370 ; perimeter
 G1 X105.549 Y120.333 E8.18835 ; perimeter
 G1 X105.833 Y122.029 E8.23942 ; perimeter
 G1 X103.916 Y122.029 E8.29635 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E8.25304 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.86568 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E7.70986 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E7.67261 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E7.26411 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.80871 ; wipe and retract
 G1 E3.29635 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.400 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z10.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X106.593 Y137.800 E5.49201 ; perimeter
 G1 X106.593 Y134.000 E5.60483 ; perimeter
 G1 X107.835 Y134.000 E5.64169 ; perimeter
 G1 X108.207 Y136.222 E5.70859 ; perimeter
 G1 X108.207 Y137.482 E5.74601 ; perimeter
 G1 X107.772 Y138.311 E5.77380 ; perimeter
 G1 X107.001 Y138.843 E5.80158 ; perimeter
 G1 X105.706 Y139.000 E5.84033 ; perimeter
 G1 X93.690 Y139.000 E6.19710 ; perimeter
 G1 X92.697 Y138.624 E6.22862 ; perimeter
 G1 X92.077 Y137.923 E6.25640 ; perimeter
 G1 X91.795 Y136.780 E6.29137 ; perimeter
 G1 X91.897 Y120.847 E6.76443 ; perimeter
 G1 X92.534 Y121.632 E6.79444 ; perimeter
 G1 X93.823 Y122.165 E6.83584 ; perimeter
 G1 X93.823 Y133.940 E7.18545 ; perimeter
 G1 F9600
 G1 X97.023 Y134.000 E6.42532 ; wipe and retract
 G1 F9600
 G1 X97.023 Y137.800 E5.52282 ; wipe and retract
 G1 F9600
 G1 X106.593 Y137.800 E3.24976 ; wipe and retract
 G1 F9600
 G1 X106.593 Y134.371 E2.43545 ; wipe and retract
 G1 E2.18545 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.400 F12000.000 ; lift Z
 G1 X92.884 Y71.015 F12000.000 ; move to first perimeter point
 G1 Z10.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.105 Y71.015 E5.12531 F7200.000 ; perimeter
 G1 X104.219 Y117.425 E6.51939 ; perimeter
 G1 X104.219 Y118.635 E6.55531 ; perimeter
 G1 X103.689 Y119.737 E6.59162 ; perimeter
 G1 X102.742 Y120.450 E6.62683 ; perimeter
 G1 X101.631 Y120.597 E6.66009 ; perimeter
 G1 X94.703 Y120.597 E6.86579 ; perimeter
 G1 X93.635 Y120.155 E6.90011 ; perimeter
 G1 X92.875 Y119.220 E6.93589 ; perimeter
 G1 X92.608 Y118.036 E6.97191 ; perimeter
 G1 X92.884 Y71.075 E8.36629 ; perimeter
 G1 X92.885 Y70.615 F12000.000 ; move inwards before travel
 G1 X92.529 Y70.658 F12000.000 ; move to first perimeter point
 G1 X97.411 Y70.658 E8.51124 F7200.000 ; perimeter
 G1 X104.576 Y117.398 E9.91523 ; perimeter
 G1 X104.576 Y118.716 E9.95438 ; perimeter
 G1 X103.973 Y119.970 E9.99568 ; perimeter
 G1 X102.881 Y120.792 E10.03626 ; perimeter
 G1 X101.655 Y120.954 E10.07300 ; perimeter
 G1 X94.632 Y120.954 E10.28150 ; perimeter
 G1 X93.415 Y120.451 E10.32062 ; perimeter
 G1 X92.545 Y119.380 E10.36157 ; perimeter
 G1 X92.251 Y118.075 E10.40129 ; perimeter
 G1 X92.529 Y70.718 E11.80742 ; perimeter
 G1 X92.174 Y70.300 F12000.000 ; move to first perimeter point
 G1 X97.718 Y70.300 E11.97201 F7200.000 ; perimeter
 G1 X104.933 Y117.371 E13.38591 ; perimeter
 G1 X104.933 Y118.797 E13.42828 ; perimeter
 G1 X104.257 Y120.203 E13.47458 ; perimeter
 G1 X103.021 Y121.133 E13.52051 ; perimeter
 G1 X101.678 Y121.311 E13.56074 ; perimeter
 G1 X94.561 Y121.311 E13.77205 ; perimeter
 G1 X93.195 Y120.746 E13.81596 ; perimeter
 G1 X92.216 Y119.540 E13.86208 ; perimeter
 G1 X91.893 Y118.114 E13.90549 ; perimeter
 G1 X92.174 Y70.360 E15.32338 ; perimeter
 G1 F9600
 G1 X97.718 Y70.300 E14.00664 ; wipe and retract
 G1 F9600
 G1 X99.908 Y84.589 E10.57338 ; wipe and retract
 G1 E10.32338 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.400 F12000.000 ; lift Z
 G1 X98.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z10.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X104.808 Y133.015 E5.17815 F7200.000 ; perimeter
 G1 X104.808 Y136.015 E5.26722 ; perimeter
 G1 X98.808 Y136.015 E5.44537 ; perimeter
 G1 X98.808 Y133.075 E5.53266 ; perimeter
 G1 X98.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X104.987 Y132.615 E5.93285 F1800.000 ; infill
 G1 X107.260 Y134.201 F12000.000 ; move to first infill point
 G1 X107.260 Y138.384 E6.12703 F7200.000 ; infill
 G1 X106.701 Y138.675 E6.15627 ; infill
 G1 X106.701 Y138.001 E6.18755 ; infill
 G1 X106.143 Y138.001 E6.21347 ; infill
 G1 X106.143 Y138.743 E6.24790 ; infill
 G1 X105.585 Y138.779 E6.27388 ; infill
 G1 X105.585 Y138.001 E6.30996 ; infill
 G1 X105.026 Y138.001 E6.33588 ; infill
 G1 X105.026 Y138.779 E6.37197 ; infill
 G1 X104.468 Y138.779 E6.39789 ; infill
 G1 X104.468 Y138.001 E6.43398 ; infill
 G1 X103.909 Y138.001 E6.45990 ; infill
 G1 X103.909 Y138.779 E6.49599 ; infill
 G1 X103.351 Y138.779 E6.52191 ; infill
 G1 X103.351 Y138.001 E6.55800 ; infill
 G1 X102.793 Y138.001 E6.58392 ; infill
 G1 X102.793 Y138.779 E6.62001 ; infill
 G1 X102.234 Y138.779 E6.64593 ; infill
 G1 X102.234 Y138.001 E6.68202 ; infill
 G1 X101.676 Y138.001 E6.70794 ; infill
 G1 X101.676 Y138.779 E6.74403 ; infill
 G1 X101.118 Y138.779 E6.76995 ; infill
 G1 X101.118 Y138.001 E6.80604 ; infill
 G1 X100.559 Y138.001 E6.83196 ; infill
 G1 X100.559 Y138.779 E6.86805 ; infill
 G1 X100.001 Y138.779 E6.89397 ; infill
 G1 X100.001 Y138.001 E6.93006 ; infill
 G1 X99.443 Y138.001 E6.95598 ; infill
 G1 X99.443 Y138.779 E6.99206 ; infill
 G1 X98.884 Y138.779 E7.01799 ; infill
 G1 X98.884 Y138.001 E7.05407 ; infill
 G1 X98.326 Y138.001 E7.08000 ; infill
 G1 X98.326 Y138.779 E7.11608 ; infill
 G1 X97.767 Y138.779 E7.14201 ; infill
 G1 X97.767 Y138.001 E7.17809 ; infill
 G1 X97.209 Y138.001 E7.20402 ; infill
 G1 X97.209 Y138.779 E7.24010 ; infill
 G1 X96.651 Y138.779 E7.26603 ; infill
 G1 X96.651 Y134.201 E7.47854 ; infill
 G1 X96.092 Y134.201 E7.50446 ; infill
 G1 X96.092 Y138.779 E7.71697 ; infill
 G1 X95.534 Y138.779 E7.74290 ; infill
 G1 X95.534 Y134.201 E7.95541 ; infill
 G1 X94.976 Y134.201 E7.98133 ; infill
 G1 X94.976 Y138.779 E8.19385 ; infill
 G1 X94.417 Y138.779 E8.21977 ; infill
 G1 X94.417 Y134.201 E8.43228 ; infill
 G1 X93.859 Y134.201 E8.45821 ; infill
 G1 X93.859 Y138.779 E8.67072 ; infill
 G1 X93.301 Y138.625 E8.69760 ; infill
 G1 X93.301 Y122.181 E9.46110 ; infill
 G1 X92.742 Y121.950 E9.48915 ; infill
 G1 X92.742 Y138.286 E10.24760 ; infill
 G1 X92.184 Y136.984 F12000.000 ; move to first infill point
 G1 X92.184 Y133.450 E10.41171 F7200.000 ; infill
 G1 F9600
 G1 X92.184 Y136.984 E9.57220 ; wipe and retract
 G1 E5.41171 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.400 F12000.000 ; lift Z
 G1 X107.818 Y135.966 F12000.000 ; move to first infill point
 G1 Z10.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X107.818 Y137.597 E5.07572 F7200.000 ; infill
 G1 F9600
 G1 X107.818 Y135.966 E4.68840 ; wipe and retract
 G1 E0.07572 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.400 F12000.000 ; lift Z
 G1 X91.703 Y119.744 F12000.000 ; move to first infill point
 G1 Z10.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.491 Y119.308 E5.01440 F1800.000 ; infill
 G1 X91.388 Y118.357 E5.04280 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E4.81559 ; wipe and retract
 G1 F9600
 G1 X91.703 Y119.744 E4.70044 ; wipe and retract
 G1 E0.04280 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.400 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z10.400 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X104.774 Y121.808 F12000.000 ; move to first infill point
 G1 X104.774 Y121.449 E5.07163 F7200.000 ; infill
 G1 X105.374 Y121.352 E5.10194 ; infill
 G1 X105.374 Y121.808 E5.12466 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.930 E5.19070 F1800.000 ; infill
 G1 X105.579 Y117.930 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.20887 F1800.000 ; infill
 G1 X104.413 Y110.364 E5.41805 ; infill
 G1 X102.427 Y97.969 F12000.000 ; move to first infill point
 G1 X98.594 Y74.053 E6.94282 F1800.000 ; infill
 G1 X98.594 Y74.053 F12000.000 ; move to first infill point
 G1 X97.962 Y70.107 E7.06146 F1800.000 ; infill
 G1 X94.434 Y69.008 F12000.000 ; move to first infill point
 G1 X94.434 Y66.551 E7.18508 F7200.000 ; infill
 G1 X93.829 Y66.551 E7.21552 ; infill
 G1 X93.829 Y69.008 E7.33915 ; infill
 G1 X93.224 Y69.008 E7.36959 ; infill
 G1 X93.224 Y66.551 E7.49321 ; infill
 G1 X92.619 Y66.551 E7.52365 ; infill
 G1 X92.619 Y69.008 E7.64728 ; infill
 G1 X94.488 Y66.349 F12000.000 ; move to first infill point
 M106 S255 ; enable fan
 G1 X94.488 Y61.200 E7.95290 F1680.000 ; infill
 G1 X94.011 Y61.200 E7.98118 ; infill
 G1 X94.011 Y66.349 E8.28681 ; infill
 G1 X93.535 Y66.349 E8.31508 ; infill
 G1 X93.535 Y61.200 E8.62071 ; infill
 G1 X93.059 Y61.200 E8.64898 ; infill
 G1 X93.059 Y66.349 E8.95461 ; infill
 G1 X92.582 Y66.349 E8.98288 ; infill
 G1 X92.582 Y62.959 E9.18409 ; infill
 M106 S232.05 ; enable fan
 M106 S234.6 ; enable fan
 G1 F9600
 G1 X92.582 Y66.349 E8.37899 ; wipe and retract
 G1 F9600
 G1 X93.059 Y66.349 E8.26586 ; wipe and retract
 G1 F9600
 G1 X93.059 Y61.200 E7.04293 ; wipe and retract
 G1 F9600
 G1 X93.535 Y61.200 E6.92980 ; wipe and retract
 G1 F9600
 G1 X93.535 Y66.349 E5.70687 ; wipe and retract
 G1 F9600
 G1 X94.011 Y66.349 E5.59374 ; wipe and retract
 G1 F9600
 G1 X94.011 Y61.466 E4.43409 ; wipe and retract
 G1 E4.18409 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.400 F12000.000 ; lift Z
 G1 X95.608 Y132.215 F12000.000 ; move to first perimeter point
 G1 Z10.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X109.346 Y132.215 E5.40791 F7200.000 ; perimeter
 G1 X109.992 Y136.074 E5.52409 ; perimeter
 G1 X109.992 Y137.923 E5.57898 ; perimeter
 G1 X109.148 Y139.531 E5.63290 ; perimeter
 G1 X107.653 Y140.562 E5.68681 ; perimeter
 G1 X105.814 Y140.785 E5.74183 ; perimeter
 G1 X93.363 Y140.785 E6.11153 ; perimeter
 G1 X91.653 Y140.137 E6.16582 ; perimeter
 G1 X90.449 Y138.778 E6.21974 ; perimeter
 G1 X90.008 Y136.991 E6.27438 ; perimeter
 G1 X90.507 Y59.215 E8.58371 ; perimeter
 G1 X96.608 Y59.215 E8.76486 ; perimeter
 G1 X96.608 Y69.215 E9.06178 ; perimeter
 G1 X98.811 Y69.215 E9.12718 ; perimeter
 G1 X107.942 Y123.815 E10.77084 ; perimeter
 G1 X95.608 Y123.815 E11.13704 ; perimeter
 G1 X95.608 Y132.155 E11.38467 ; perimeter
 G1 X95.608 Y132.615 F12000.000 ; move inwards before travel
 G1 X95.251 Y132.572 F12000.000 ; move to first perimeter point
 G1 X98.451 Y132.572 E11.47968 F7200.000 ; perimeter
 G1 X98.451 Y136.372 E11.59251 ; perimeter
 G1 X105.165 Y136.372 E11.79186 ; perimeter
 G1 X105.165 Y132.572 E11.90469 ; perimeter
 G1 X109.044 Y132.572 E12.01986 ; perimeter
 G1 X109.635 Y136.104 E12.12618 ; perimeter
 G1 X109.635 Y137.835 E12.17758 ; perimeter
 G1 X108.873 Y139.287 E12.22627 ; perimeter
 G1 X107.523 Y140.218 E12.27496 ; perimeter
 G1 X105.792 Y140.428 E12.32672 ; perimeter
 G1 X93.428 Y140.428 E12.69384 ; perimeter
 G1 X91.862 Y139.834 E12.74357 ; perimeter
 G1 X90.774 Y138.607 E12.79226 ; perimeter
 G1 X90.366 Y136.949 E12.84297 ; perimeter
 G1 X90.862 Y59.572 E15.14044 ; perimeter
 G1 X96.251 Y59.572 E15.30046 ; perimeter
 G1 X96.251 Y69.572 E15.59737 ; perimeter
 G1 X98.509 Y69.572 E15.66441 ; perimeter
 G1 X107.520 Y123.458 E17.28656 ; perimeter
 G1 X95.251 Y123.458 E17.65085 ; perimeter
 G1 X95.251 Y132.512 E17.91968 ; perimeter
 G1 X94.894 Y132.929 F12000.000 ; move to first perimeter point
 G1 X98.094 Y132.929 E18.01469 F7200.000 ; perimeter
 G1 X98.094 Y136.729 E18.12751 ; perimeter
 G1 X105.522 Y136.729 E18.34807 ; perimeter
 G1 X105.522 Y132.929 E18.46090 ; perimeter
 G1 X108.742 Y132.929 E18.55649 ; perimeter
 G1 X109.278 Y136.133 E18.65296 ; perimeter
 G1 X109.278 Y137.747 E18.70086 ; perimeter
 G1 X108.597 Y139.043 E18.74432 ; perimeter
 G1 X107.393 Y139.874 E18.78779 ; perimeter
 G1 X105.771 Y140.071 E18.83630 ; perimeter
 G1 X93.493 Y140.071 E19.20083 ; perimeter
 G1 X92.071 Y139.532 E19.24601 ; perimeter
 G1 X91.100 Y138.436 E19.28947 ; perimeter
 G1 X90.723 Y136.906 E19.33624 ; perimeter
 G1 X91.216 Y59.929 E21.62186 ; perimeter
 G1 X95.894 Y59.929 E21.76074 ; perimeter
 G1 X95.894 Y69.929 E22.05765 ; perimeter
 G1 X98.206 Y69.929 E22.12631 ; perimeter
 G1 X107.098 Y123.100 E23.72697 ; perimeter
 G1 X94.894 Y123.100 E24.08933 ; perimeter
 G1 X94.894 Y132.869 E24.37937 ; perimeter
 G1 X94.537 Y133.286 F12000.000 ; move to first perimeter point
 G1 X97.737 Y133.286 E24.47438 F7200.000 ; perimeter
 G1 X97.737 Y137.086 E24.58721 ; perimeter
 G1 X105.879 Y137.086 E24.82897 ; perimeter
 G1 X105.879 Y133.286 E24.94179 ; perimeter
 G1 X108.440 Y133.286 E25.01781 ; perimeter
 G1 X108.921 Y136.163 E25.10442 ; perimeter
 G1 X108.921 Y137.659 E25.14883 ; perimeter
 G1 X108.322 Y138.799 E25.18707 ; perimeter
 G1 X107.262 Y139.530 E25.22530 ; perimeter
 G1 X105.749 Y139.714 E25.27056 ; perimeter
 G1 X93.559 Y139.714 E25.63250 ; perimeter
 G1 X92.280 Y139.229 E25.67313 ; perimeter
 G1 X91.426 Y138.265 E25.71136 ; perimeter
 G1 X91.080 Y136.864 E25.75420 ; perimeter
 G1 X91.571 Y60.286 E28.02796 ; perimeter
 G1 X95.537 Y60.286 E28.14571 ; perimeter
 G1 X95.537 Y69.943 E28.43245 ; perimeter
 G1 X91.819 Y69.943 E28.54283 ; perimeter
 G1 X91.536 Y118.153 E29.97425 ; perimeter
 G1 X91.886 Y119.700 E30.02136 ; perimeter
 G1 X92.975 Y121.041 E30.07265 ; perimeter
 G1 X94.490 Y121.668 E30.12135 ; perimeter
 G1 X101.702 Y121.668 E30.33547 ; perimeter
 G1 X103.161 Y121.475 E30.37918 ; perimeter
 G1 X104.541 Y120.436 E30.43047 ; perimeter
 G1 X105.290 Y118.879 E30.48177 ; perimeter
 G1 X105.290 Y117.343 E30.52737 ; perimeter
 G1 X102.350 Y98.162 E31.10353 ; perimeter
 G1 X102.560 Y98.128 E31.10985 ; perimeter
 G1 X106.677 Y122.743 E31.85085 ; perimeter
 G1 X94.537 Y122.743 E32.21129 ; perimeter
 G1 X94.537 Y133.226 E32.52253 ; perimeter
 G1 F9600
 G1 X97.737 Y133.286 E31.76239 ; wipe and retract
 G1 F9600
 G1 X97.737 Y137.086 E30.85989 ; wipe and retract
 G1 F9600
 G1 X105.879 Y137.086 E28.92606 ; wipe and retract
 G1 F9600
 G1 X105.879 Y133.286 E28.02356 ; wipe and retract
 G1 F9600
 G1 X106.936 Y133.286 E27.77253 ; wipe and retract
 G1 E27.52253 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.600 F12000.000 ; lift Z
 G1 X95.180 Y69.586 F12000.000 ; move to first perimeter point
 G1 Z10.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.869 Y69.586 E5.09831 F7200.000 ; perimeter
 G1 X91.926 Y60.643 E5.36386 ; perimeter
 G1 X95.180 Y60.643 E5.46047 ; perimeter
 G1 X95.180 Y69.526 E5.72422 ; perimeter
 G1 X94.823 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.228 Y69.229 E5.80126 F7200.000 ; perimeter
 G1 X92.281 Y61.000 E6.04560 ; perimeter
 G1 X94.823 Y61.000 E6.12108 ; perimeter
 G1 X94.823 Y69.169 E6.36363 ; perimeter
 G1 F9600
 G1 X92.228 Y69.229 E5.74724 ; wipe and retract
 G1 F9600
 G1 X92.281 Y61.000 E3.79276 ; wipe and retract
 G1 F9600
 G1 X94.823 Y61.000 E3.18906 ; wipe and retract
 G1 F9600
 G1 X94.823 Y67.633 E1.61363 ; wipe and retract
 G1 E1.36363 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.600 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z10.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X106.236 Y137.443 E5.80503 ; perimeter
 G1 X106.236 Y133.643 E5.91785 ; perimeter
 G1 X108.137 Y133.643 E5.97429 ; perimeter
 G1 X108.564 Y136.193 E6.05104 ; perimeter
 G1 X108.564 Y137.571 E6.09196 ; perimeter
 G1 X108.047 Y138.555 E6.12497 ; perimeter
 G1 X107.132 Y139.187 E6.15798 ; perimeter
 G1 X105.728 Y139.357 E6.19998 ; perimeter
 G1 X93.624 Y139.357 E6.55934 ; perimeter
 G1 X92.488 Y138.926 E6.59541 ; perimeter
 G1 X91.751 Y138.094 E6.62842 ; perimeter
 G1 X91.438 Y136.822 E6.66732 ; perimeter
 G1 X91.546 Y119.849 E7.17128 ; perimeter
 G1 X92.754 Y121.337 E7.22818 ; perimeter
 G1 X94.419 Y122.025 E7.28168 ; perimeter
 G1 X101.725 Y122.025 E7.49860 ; perimeter
 G1 X103.301 Y121.817 E7.54579 ; perimeter
 G1 X104.825 Y120.669 E7.60245 ; perimeter
 G1 X105.561 Y119.141 E7.65279 ; perimeter
 G1 X105.716 Y119.163 E7.65745 ; perimeter
 G1 X106.255 Y122.386 E7.75447 ; perimeter
 G1 X94.240 Y122.386 E8.11121 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E8.11579 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E8.16422 ; perimeter
 G1 X105.394 Y120.311 E8.18370 ; perimeter
 G1 X105.549 Y120.333 E8.18835 ; perimeter
 G1 X105.833 Y122.029 E8.23942 ; perimeter
 G1 X103.916 Y122.029 E8.29635 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E8.25304 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.86568 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E7.70986 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E7.67261 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E7.26411 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.80871 ; wipe and retract
 G1 E3.29635 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.600 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z10.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X106.593 Y137.800 E5.49201 ; perimeter
 G1 X106.593 Y134.000 E5.60483 ; perimeter
 G1 X107.835 Y134.000 E5.64169 ; perimeter
 G1 X108.207 Y136.222 E5.70859 ; perimeter
 G1 X108.207 Y137.482 E5.74601 ; perimeter
 G1 X107.772 Y138.311 E5.77380 ; perimeter
 G1 X107.001 Y138.843 E5.80158 ; perimeter
 G1 X105.706 Y139.000 E5.84033 ; perimeter
 G1 X93.690 Y139.000 E6.19710 ; perimeter
 G1 X92.697 Y138.624 E6.22862 ; perimeter
 G1 X92.077 Y137.923 E6.25640 ; perimeter
 G1 X91.795 Y136.780 E6.29137 ; perimeter
 G1 X91.897 Y120.847 E6.76443 ; perimeter
 G1 X92.534 Y121.632 E6.79444 ; perimeter
 G1 X93.823 Y122.165 E6.83584 ; perimeter
 G1 X93.823 Y133.940 E7.18545 ; perimeter
 G1 F9600
 G1 X97.023 Y134.000 E6.42532 ; wipe and retract
 G1 F9600
 G1 X97.023 Y137.800 E5.52282 ; wipe and retract
 G1 F9600
 G1 X106.593 Y137.800 E3.24976 ; wipe and retract
 G1 F9600
 G1 X106.593 Y134.371 E2.43545 ; wipe and retract
 G1 E2.18545 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.600 F12000.000 ; lift Z
 G1 X92.884 Y71.015 F12000.000 ; move to first perimeter point
 G1 Z10.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.105 Y71.015 E5.12531 F7200.000 ; perimeter
 G1 X104.219 Y117.425 E6.51939 ; perimeter
 G1 X104.219 Y118.635 E6.55531 ; perimeter
 G1 X103.689 Y119.737 E6.59162 ; perimeter
 G1 X102.742 Y120.450 E6.62683 ; perimeter
 G1 X101.631 Y120.597 E6.66009 ; perimeter
 G1 X94.703 Y120.597 E6.86579 ; perimeter
 G1 X93.635 Y120.155 E6.90011 ; perimeter
 G1 X92.875 Y119.220 E6.93589 ; perimeter
 G1 X92.608 Y118.036 E6.97191 ; perimeter
 G1 X92.884 Y71.075 E8.36629 ; perimeter
 G1 X92.885 Y70.615 F12000.000 ; move inwards before travel
 G1 X92.529 Y70.658 F12000.000 ; move to first perimeter point
 G1 X97.411 Y70.658 E8.51124 F7200.000 ; perimeter
 G1 X104.576 Y117.398 E9.91523 ; perimeter
 G1 X104.576 Y118.716 E9.95438 ; perimeter
 G1 X103.973 Y119.970 E9.99568 ; perimeter
 G1 X102.881 Y120.792 E10.03626 ; perimeter
 G1 X101.655 Y120.954 E10.07300 ; perimeter
 G1 X94.632 Y120.954 E10.28150 ; perimeter
 G1 X93.415 Y120.451 E10.32062 ; perimeter
 G1 X92.545 Y119.380 E10.36157 ; perimeter
 G1 X92.251 Y118.075 E10.40129 ; perimeter
 G1 X92.529 Y70.718 E11.80742 ; perimeter
 G1 X92.174 Y70.300 F12000.000 ; move to first perimeter point
 G1 X97.718 Y70.300 E11.97201 F7200.000 ; perimeter
 G1 X104.933 Y117.371 E13.38591 ; perimeter
 G1 X104.933 Y118.797 E13.42828 ; perimeter
 G1 X104.257 Y120.203 E13.47458 ; perimeter
 G1 X103.021 Y121.133 E13.52051 ; perimeter
 G1 X101.678 Y121.311 E13.56074 ; perimeter
 G1 X94.561 Y121.311 E13.77205 ; perimeter
 G1 X93.195 Y120.746 E13.81596 ; perimeter
 G1 X92.216 Y119.540 E13.86208 ; perimeter
 G1 X91.893 Y118.114 E13.90549 ; perimeter
 G1 X92.174 Y70.360 E15.32338 ; perimeter
 G1 F9600
 G1 X97.718 Y70.300 E14.00664 ; wipe and retract
 G1 F9600
 G1 X99.908 Y84.589 E10.57338 ; wipe and retract
 G1 E10.32338 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.600 F12000.000 ; lift Z
 G1 X98.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z10.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X104.808 Y133.015 E5.17815 F7200.000 ; perimeter
 G1 X104.808 Y136.015 E5.26722 ; perimeter
 G1 X98.808 Y136.015 E5.44537 ; perimeter
 G1 X98.808 Y133.075 E5.53266 ; perimeter
 G1 X98.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X104.987 Y132.615 E5.93285 F1800.000 ; infill
 G1 X107.726 Y134.586 F12000.000 ; move to first infill point
 G1 X106.795 Y134.586 E5.97739 F7200.000 ; infill
 G1 X106.795 Y135.161 E6.00489 ; infill
 G1 X107.823 Y135.161 E6.05403 ; infill
 G1 X107.919 Y135.736 E6.08192 ; infill
 G1 X106.795 Y135.736 E6.13566 ; infill
 G1 X106.795 Y136.311 E6.16316 ; infill
 G1 X107.985 Y136.311 E6.22008 ; infill
 G1 X107.985 Y136.886 E6.24758 ; infill
 G1 X106.795 Y136.886 E6.30450 ; infill
 G1 X106.795 Y137.461 E6.33200 ; infill
 G1 X107.969 Y137.461 E6.38812 ; infill
 G1 X107.667 Y138.036 E6.41918 ; infill
 G1 X106.795 Y138.036 E6.46087 ; infill
 G1 X106.015 Y138.612 E6.50720 ; infill
 G1 X93.538 Y138.612 E7.10389 ; infill
 G1 X96.821 Y138.036 F12000.000 ; move to first infill point
 G1 X92.502 Y138.036 E7.31042 F7200.000 ; infill
 G1 X92.175 Y137.461 E7.34205 ; infill
 G1 X96.821 Y137.461 E7.56422 ; infill
 G1 X96.821 Y136.886 E7.59172 ; infill
 G1 X92.034 Y136.886 E7.82067 ; infill
 G1 X92.017 Y136.311 E7.84818 ; infill
 G1 X96.821 Y136.311 E8.07794 ; infill
 G1 X96.821 Y135.736 E8.10544 ; infill
 G1 X92.017 Y135.736 E8.33519 ; infill
 G1 X92.017 Y135.161 E8.36270 ; infill
 G1 X96.821 Y135.161 E8.59245 ; infill
 G1 X96.821 Y134.586 E8.61995 ; infill
 G1 X92.017 Y134.586 E8.84971 ; infill
 G1 X93.621 Y134.011 F12000.000 ; move to first infill point
 G1 X92.017 Y134.011 E8.92644 F7200.000 ; infill
 G1 X92.018 Y133.436 E8.95394 ; infill
 G1 X93.621 Y133.436 E9.03062 ; infill
 G1 X93.621 Y132.860 E9.05812 ; infill
 G1 X92.022 Y132.860 E9.13462 ; infill
 G1 X92.025 Y132.285 E9.16212 ; infill
 G1 X93.621 Y132.285 E9.23845 ; infill
 G1 X93.621 Y131.710 E9.26595 ; infill
 G1 X92.029 Y131.710 E9.34210 ; infill
 G1 X92.033 Y131.135 E9.36960 ; infill
 G1 X93.621 Y131.135 E9.44557 ; infill
 G1 X93.621 Y130.560 E9.47307 ; infill
 G1 X92.036 Y130.560 E9.54887 ; infill
 G1 X92.040 Y129.985 E9.57637 ; infill
 G1 X93.621 Y129.985 E9.65199 ; infill
 G1 X93.621 Y129.410 E9.67949 ; infill
 G1 X92.044 Y129.410 E9.75493 ; infill
 G1 X92.047 Y128.835 E9.78243 ; infill
 G1 X93.621 Y128.835 E9.85770 ; infill
 G1 X93.621 Y128.260 E9.88520 ; infill
 G1 X92.051 Y128.260 E9.96029 ; infill
 G1 X92.055 Y127.685 E9.98780 ; infill
 G1 X93.621 Y127.685 E10.06271 ; infill
 G1 X93.621 Y127.109 E10.09021 ; infill
 G1 X92.058 Y127.109 E10.16495 ; infill
 G1 X92.062 Y126.534 E10.19245 ; infill
 G1 X93.621 Y126.534 E10.26701 ; infill
 G1 X93.621 Y125.959 E10.29451 ; infill
 G1 X92.066 Y125.959 E10.36890 ; infill
 G1 X92.069 Y125.384 E10.39640 ; infill
 G1 X93.621 Y125.384 E10.47061 ; infill
 G1 X93.621 Y124.809 E10.49811 ; infill
 G1 X92.073 Y124.809 E10.57214 ; infill
 G1 X92.077 Y124.234 E10.59965 ; infill
 G1 X93.621 Y124.234 E10.67350 ; infill
 G1 X93.621 Y123.659 E10.70100 ; infill
 G1 X92.081 Y123.659 E10.77468 ; infill
 G1 X92.084 Y123.084 E10.80219 ; infill
 G1 X93.621 Y123.084 E10.87569 ; infill
 G1 X93.621 Y122.509 E10.90319 ; infill
 G1 X92.088 Y122.509 E10.97652 ; infill
 G1 X92.092 Y121.934 E11.00402 ; infill
 G1 X92.472 Y121.934 E11.02219 ; infill
 G1 X91.703 Y119.744 F12000.000 ; move to first infill point
 G1 X91.491 Y119.308 E11.03659 F1800.000 ; infill
 G1 X91.388 Y118.357 E11.06499 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E10.83778 ; wipe and retract
 G1 F9600
 G1 X91.703 Y119.744 E10.72263 ; wipe and retract
 G1 E6.06499 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.600 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z10.600 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X105.107 Y121.240 F12000.000 ; move to first infill point
 G1 X105.494 Y121.240 E5.07167 F7200.000 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.930 E5.13770 F1800.000 ; infill
 G1 X105.579 Y117.930 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.15587 F1800.000 ; infill
 G1 X104.413 Y110.364 E5.36505 ; infill
 G1 X102.427 Y97.969 F12000.000 ; move to first infill point
 G1 X98.594 Y74.053 E6.88982 F1800.000 ; infill
 G1 X98.594 Y74.053 F12000.000 ; move to first infill point
 G1 X97.962 Y70.107 E7.00846 F1800.000 ; infill
 G1 X94.601 Y68.841 F12000.000 ; move to first infill point
 G1 X92.452 Y68.841 E7.11092 F7200.000 ; infill
 G1 X92.452 Y68.267 E7.13824 ; infill
 G1 X94.601 Y68.267 E7.24069 ; infill
 G1 X94.601 Y67.694 E7.26802 ; infill
 G1 X92.452 Y67.694 E7.37047 ; infill
 G1 X92.452 Y67.121 E7.39779 ; infill
 G1 X94.601 Y67.121 E7.50025 ; infill
 G1 X94.601 Y66.548 E7.52757 ; infill
 G1 X92.452 Y66.548 E7.63002 ; infill
 G1 X92.452 Y65.974 E7.65735 ; infill
 G1 X94.601 Y65.974 E7.75980 ; infill
 G1 X94.601 Y65.401 E7.78712 ; infill
 G1 X92.454 Y65.401 E7.88948 ; infill
 G1 X92.458 Y64.828 E7.91681 ; infill
 G1 X94.601 Y64.828 E8.01899 ; infill
 G1 X94.601 Y64.255 E8.04631 ; infill
 G1 X92.461 Y64.255 E8.14831 ; infill
 G1 X92.465 Y63.681 E8.17564 ; infill
 G1 X94.601 Y63.681 E8.27747 ; infill
 G1 X94.601 Y63.108 E8.30479 ; infill
 G1 X92.469 Y63.108 E8.40645 ; infill
 G1 X92.472 Y62.535 E8.43377 ; infill
 G1 X94.601 Y62.535 E8.53525 ; infill
 G1 X94.601 Y61.962 E8.56258 ; infill
 G1 X92.476 Y61.962 E8.66388 ; infill
 G1 X92.480 Y61.388 E8.69121 ; infill
 G1 X94.601 Y61.388 E8.79234 ; infill
 M106 S237.15 ; enable fan
 G1 F9600
 G1 X92.480 Y61.388 E8.28845 ; wipe and retract
 G1 F9600
 G1 X92.476 Y61.962 E8.15230 ; wipe and retract
 G1 F9600
 G1 X94.601 Y61.962 E7.64754 ; wipe and retract
 G1 F9600
 G1 X94.601 Y62.535 E7.51139 ; wipe and retract
 G1 F9600
 G1 X92.472 Y62.535 E7.00576 ; wipe and retract
 G1 F9600
 G1 X92.469 Y63.108 E6.86961 ; wipe and retract
 G1 F9600
 G1 X94.601 Y63.108 E6.36310 ; wipe and retract
 G1 F9600
 G1 X94.601 Y63.681 E6.22696 ; wipe and retract
 G1 F9600
 G1 X92.465 Y63.681 E5.71958 ; wipe and retract
 G1 F9600
 G1 X92.461 Y64.255 E5.58343 ; wipe and retract
 G1 F9600
 G1 X94.601 Y64.255 E5.07518 ; wipe and retract
 G1 F9600
 G1 X94.601 Y64.828 E4.93903 ; wipe and retract
 G1 F9600
 G1 X92.458 Y64.828 E4.42991 ; wipe and retract
 G1 F9600
 G1 X92.454 Y65.401 E4.29376 ; wipe and retract
 G1 F9600
 G1 X93.513 Y65.401 E4.04234 ; wipe and retract
 G1 E3.79234 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.600 F12000.000 ; lift Z
 G1 X95.608 Y132.215 F12000.000 ; move to first perimeter point
 G1 Z10.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X109.346 Y132.215 E5.40791 F7200.000 ; perimeter
 G1 X109.992 Y136.074 E5.52409 ; perimeter
 G1 X109.992 Y137.923 E5.57898 ; perimeter
 G1 X109.148 Y139.531 E5.63290 ; perimeter
 G1 X107.653 Y140.562 E5.68681 ; perimeter
 G1 X105.814 Y140.785 E5.74183 ; perimeter
 G1 X93.363 Y140.785 E6.11153 ; perimeter
 G1 X91.653 Y140.137 E6.16582 ; perimeter
 G1 X90.449 Y138.778 E6.21974 ; perimeter
 G1 X90.008 Y136.991 E6.27438 ; perimeter
 G1 X90.507 Y59.215 E8.58371 ; perimeter
 G1 X96.608 Y59.215 E8.76486 ; perimeter
 G1 X96.608 Y69.215 E9.06178 ; perimeter
 G1 X98.811 Y69.215 E9.12718 ; perimeter
 G1 X107.942 Y123.815 E10.77084 ; perimeter
 G1 X95.608 Y123.815 E11.13704 ; perimeter
 G1 X95.608 Y132.155 E11.38467 ; perimeter
 G1 X95.608 Y132.615 F12000.000 ; move inwards before travel
 G1 X95.251 Y132.572 F12000.000 ; move to first perimeter point
 G1 X98.451 Y132.572 E11.47968 F7200.000 ; perimeter
 G1 X98.451 Y136.372 E11.59251 ; perimeter
 G1 X105.165 Y136.372 E11.79186 ; perimeter
 G1 X105.165 Y132.572 E11.90469 ; perimeter
 G1 X109.044 Y132.572 E12.01986 ; perimeter
 G1 X109.635 Y136.104 E12.12618 ; perimeter
 G1 X109.635 Y137.835 E12.17758 ; perimeter
 G1 X108.873 Y139.287 E12.22627 ; perimeter
 G1 X107.523 Y140.218 E12.27496 ; perimeter
 G1 X105.792 Y140.428 E12.32672 ; perimeter
 G1 X93.428 Y140.428 E12.69384 ; perimeter
 G1 X91.862 Y139.834 E12.74357 ; perimeter
 G1 X90.774 Y138.607 E12.79226 ; perimeter
 G1 X90.366 Y136.949 E12.84297 ; perimeter
 G1 X90.862 Y59.572 E15.14044 ; perimeter
 G1 X96.251 Y59.572 E15.30046 ; perimeter
 G1 X96.251 Y69.572 E15.59737 ; perimeter
 G1 X98.509 Y69.572 E15.66441 ; perimeter
 G1 X107.520 Y123.458 E17.28656 ; perimeter
 G1 X95.251 Y123.458 E17.65085 ; perimeter
 G1 X95.251 Y132.512 E17.91968 ; perimeter
 G1 X94.894 Y132.929 F12000.000 ; move to first perimeter point
 G1 X98.094 Y132.929 E18.01469 F7200.000 ; perimeter
 G1 X98.094 Y136.729 E18.12751 ; perimeter
 G1 X105.522 Y136.729 E18.34807 ; perimeter
 G1 X105.522 Y132.929 E18.46090 ; perimeter
 G1 X108.742 Y132.929 E18.55649 ; perimeter
 G1 X109.278 Y136.133 E18.65296 ; perimeter
 G1 X109.278 Y137.747 E18.70086 ; perimeter
 G1 X108.597 Y139.043 E18.74432 ; perimeter
 G1 X107.393 Y139.874 E18.78779 ; perimeter
 G1 X105.771 Y140.071 E18.83630 ; perimeter
 G1 X93.493 Y140.071 E19.20083 ; perimeter
 G1 X92.071 Y139.532 E19.24601 ; perimeter
 G1 X91.100 Y138.436 E19.28947 ; perimeter
 G1 X90.723 Y136.906 E19.33624 ; perimeter
 G1 X91.216 Y59.929 E21.62186 ; perimeter
 G1 X95.894 Y59.929 E21.76074 ; perimeter
 G1 X95.894 Y69.929 E22.05765 ; perimeter
 G1 X98.206 Y69.929 E22.12631 ; perimeter
 G1 X107.098 Y123.100 E23.72697 ; perimeter
 G1 X94.894 Y123.100 E24.08933 ; perimeter
 G1 X94.894 Y132.869 E24.37937 ; perimeter
 G1 X94.537 Y133.286 F12000.000 ; move to first perimeter point
 G1 X97.737 Y133.286 E24.47438 F7200.000 ; perimeter
 G1 X97.737 Y137.086 E24.58721 ; perimeter
 G1 X105.879 Y137.086 E24.82897 ; perimeter
 G1 X105.879 Y133.286 E24.94179 ; perimeter
 G1 X108.440 Y133.286 E25.01781 ; perimeter
 G1 X108.921 Y136.163 E25.10442 ; perimeter
 G1 X108.921 Y137.659 E25.14883 ; perimeter
 G1 X108.322 Y138.799 E25.18707 ; perimeter
 G1 X107.262 Y139.530 E25.22530 ; perimeter
 G1 X105.749 Y139.714 E25.27056 ; perimeter
 G1 X93.559 Y139.714 E25.63250 ; perimeter
 G1 X92.280 Y139.229 E25.67313 ; perimeter
 G1 X91.426 Y138.265 E25.71136 ; perimeter
 G1 X91.080 Y136.864 E25.75420 ; perimeter
 G1 X91.571 Y60.286 E28.02796 ; perimeter
 G1 X95.537 Y60.286 E28.14570 ; perimeter
 G1 X95.537 Y69.943 E28.43245 ; perimeter
 G1 X91.819 Y69.943 E28.54283 ; perimeter
 G1 X91.536 Y118.153 E29.97425 ; perimeter
 G1 X91.886 Y119.700 E30.02136 ; perimeter
 G1 X92.975 Y121.041 E30.07265 ; perimeter
 G1 X94.490 Y121.668 E30.12135 ; perimeter
 G1 X101.702 Y121.668 E30.33547 ; perimeter
 G1 X103.161 Y121.475 E30.37918 ; perimeter
 G1 X104.541 Y120.436 E30.43047 ; perimeter
 G1 X105.290 Y118.879 E30.48177 ; perimeter
 G1 X105.290 Y117.343 E30.52737 ; perimeter
 G1 X102.350 Y98.162 E31.10353 ; perimeter
 G1 X102.560 Y98.128 E31.10985 ; perimeter
 G1 X106.677 Y122.743 E31.85085 ; perimeter
 G1 X94.537 Y122.743 E32.21129 ; perimeter
 G1 X94.537 Y133.226 E32.52253 ; perimeter
 G1 F9600
 G1 X97.737 Y133.286 E31.76239 ; wipe and retract
 G1 F9600
 G1 X97.737 Y137.086 E30.85989 ; wipe and retract
 G1 F9600
 G1 X105.879 Y137.086 E28.92606 ; wipe and retract
 G1 F9600
 G1 X105.879 Y133.286 E28.02356 ; wipe and retract
 G1 F9600
 G1 X106.936 Y133.286 E27.77253 ; wipe and retract
 G1 E27.52253 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.800 F12000.000 ; lift Z
 G1 X95.180 Y69.586 F12000.000 ; move to first perimeter point
 G1 Z10.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.869 Y69.586 E5.09831 F7200.000 ; perimeter
 G1 X91.926 Y60.643 E5.36386 ; perimeter
 G1 X95.180 Y60.643 E5.46047 ; perimeter
 G1 X95.180 Y69.526 E5.72422 ; perimeter
 G1 X94.823 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.228 Y69.229 E5.80126 F7200.000 ; perimeter
 G1 X92.281 Y61.000 E6.04560 ; perimeter
 G1 X94.823 Y61.000 E6.12108 ; perimeter
 G1 X94.823 Y69.169 E6.36363 ; perimeter
 G1 F9600
 G1 X92.228 Y69.229 E5.74724 ; wipe and retract
 G1 F9600
 G1 X92.281 Y61.000 E3.79276 ; wipe and retract
 G1 F9600
 G1 X94.823 Y61.000 E3.18906 ; wipe and retract
 G1 F9600
 G1 X94.823 Y67.633 E1.61363 ; wipe and retract
 G1 E1.36363 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.800 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z10.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X106.236 Y137.443 E5.80503 ; perimeter
 G1 X106.236 Y133.643 E5.91785 ; perimeter
 G1 X108.137 Y133.643 E5.97429 ; perimeter
 G1 X108.564 Y136.193 E6.05104 ; perimeter
 G1 X108.564 Y137.571 E6.09196 ; perimeter
 G1 X108.047 Y138.555 E6.12497 ; perimeter
 G1 X107.132 Y139.187 E6.15798 ; perimeter
 G1 X105.728 Y139.357 E6.19998 ; perimeter
 G1 X93.624 Y139.357 E6.55934 ; perimeter
 G1 X92.488 Y138.926 E6.59541 ; perimeter
 G1 X91.751 Y138.094 E6.62842 ; perimeter
 G1 X91.438 Y136.822 E6.66732 ; perimeter
 G1 X91.546 Y119.849 E7.17128 ; perimeter
 G1 X92.754 Y121.337 E7.22818 ; perimeter
 G1 X94.419 Y122.025 E7.28168 ; perimeter
 G1 X101.725 Y122.025 E7.49860 ; perimeter
 G1 X103.301 Y121.817 E7.54579 ; perimeter
 G1 X104.825 Y120.669 E7.60245 ; perimeter
 G1 X105.561 Y119.141 E7.65279 ; perimeter
 G1 X105.716 Y119.163 E7.65745 ; perimeter
 G1 X106.255 Y122.386 E7.75447 ; perimeter
 G1 X94.240 Y122.386 E8.11121 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E8.11579 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E8.16422 ; perimeter
 G1 X105.394 Y120.311 E8.18370 ; perimeter
 G1 X105.549 Y120.333 E8.18835 ; perimeter
 G1 X105.833 Y122.029 E8.23942 ; perimeter
 G1 X103.916 Y122.029 E8.29635 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E8.25304 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.86568 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E7.70986 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E7.67261 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E7.26411 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.80871 ; wipe and retract
 G1 E3.29635 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.800 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z10.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X106.593 Y137.800 E5.49201 ; perimeter
 G1 X106.593 Y134.000 E5.60483 ; perimeter
 G1 X107.835 Y134.000 E5.64169 ; perimeter
 G1 X108.207 Y136.222 E5.70859 ; perimeter
 G1 X108.207 Y137.482 E5.74601 ; perimeter
 G1 X107.772 Y138.311 E5.77380 ; perimeter
 G1 X107.001 Y138.843 E5.80158 ; perimeter
 G1 X105.706 Y139.000 E5.84033 ; perimeter
 G1 X93.690 Y139.000 E6.19710 ; perimeter
 G1 X92.697 Y138.624 E6.22862 ; perimeter
 G1 X92.077 Y137.923 E6.25640 ; perimeter
 G1 X91.795 Y136.780 E6.29137 ; perimeter
 G1 X91.897 Y120.847 E6.76443 ; perimeter
 G1 X92.534 Y121.632 E6.79444 ; perimeter
 G1 X93.823 Y122.165 E6.83584 ; perimeter
 G1 X93.823 Y133.940 E7.18545 ; perimeter
 G1 F9600
 G1 X97.023 Y134.000 E6.42532 ; wipe and retract
 G1 F9600
 G1 X97.023 Y137.800 E5.52282 ; wipe and retract
 G1 F9600
 G1 X106.593 Y137.800 E3.24976 ; wipe and retract
 G1 F9600
 G1 X106.593 Y134.371 E2.43545 ; wipe and retract
 G1 E2.18545 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.800 F12000.000 ; lift Z
 G1 X92.884 Y71.015 F12000.000 ; move to first perimeter point
 G1 Z10.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.105 Y71.015 E5.12531 F7200.000 ; perimeter
 G1 X104.219 Y117.425 E6.51939 ; perimeter
 G1 X104.219 Y118.635 E6.55531 ; perimeter
 G1 X103.689 Y119.737 E6.59162 ; perimeter
 G1 X102.742 Y120.450 E6.62683 ; perimeter
 G1 X101.631 Y120.597 E6.66009 ; perimeter
 G1 X94.703 Y120.597 E6.86579 ; perimeter
 G1 X93.635 Y120.155 E6.90011 ; perimeter
 G1 X92.875 Y119.220 E6.93589 ; perimeter
 G1 X92.608 Y118.036 E6.97191 ; perimeter
 G1 X92.884 Y71.075 E8.36629 ; perimeter
 G1 X92.885 Y70.615 F12000.000 ; move inwards before travel
 G1 X92.529 Y70.658 F12000.000 ; move to first perimeter point
 G1 X97.411 Y70.658 E8.51124 F7200.000 ; perimeter
 G1 X104.576 Y117.398 E9.91523 ; perimeter
 G1 X104.576 Y118.716 E9.95438 ; perimeter
 G1 X103.973 Y119.970 E9.99568 ; perimeter
 G1 X102.881 Y120.792 E10.03626 ; perimeter
 G1 X101.655 Y120.954 E10.07300 ; perimeter
 G1 X94.632 Y120.954 E10.28150 ; perimeter
 G1 X93.415 Y120.451 E10.32062 ; perimeter
 G1 X92.545 Y119.380 E10.36157 ; perimeter
 G1 X92.251 Y118.075 E10.40129 ; perimeter
 G1 X92.529 Y70.718 E11.80742 ; perimeter
 G1 X92.174 Y70.300 F12000.000 ; move to first perimeter point
 G1 X97.718 Y70.300 E11.97201 F7200.000 ; perimeter
 G1 X104.933 Y117.371 E13.38591 ; perimeter
 G1 X104.933 Y118.797 E13.42828 ; perimeter
 G1 X104.257 Y120.203 E13.47458 ; perimeter
 G1 X103.021 Y121.133 E13.52051 ; perimeter
 G1 X101.678 Y121.311 E13.56074 ; perimeter
 G1 X94.561 Y121.311 E13.77205 ; perimeter
 G1 X93.195 Y120.746 E13.81596 ; perimeter
 G1 X92.216 Y119.540 E13.86208 ; perimeter
 G1 X91.893 Y118.114 E13.90549 ; perimeter
 G1 X92.174 Y70.360 E15.32338 ; perimeter
 G1 F9600
 G1 X97.718 Y70.300 E14.00664 ; wipe and retract
 G1 F9600
 G1 X99.908 Y84.589 E10.57338 ; wipe and retract
 G1 E10.32338 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.800 F12000.000 ; lift Z
 G1 X98.808 Y133.015 F12000.000 ; move to first perimeter point
 G1 Z10.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X104.808 Y133.015 E5.17815 F7200.000 ; perimeter
 G1 X104.808 Y136.015 E5.26722 ; perimeter
 G1 X98.808 Y136.015 E5.44537 ; perimeter
 G1 X98.808 Y133.075 E5.53266 ; perimeter
 G1 X98.808 Y132.615 F12000.000 ; move inwards before travel
 G1 X98.630 Y132.615 F12000.000 ; move to first infill point
 G1 X104.987 Y132.615 E5.93285 F1800.000 ; infill
 G1 X107.260 Y134.201 F12000.000 ; move to first infill point
 G1 X107.260 Y138.384 E6.12703 F7200.000 ; infill
 G1 X106.701 Y138.675 E6.15627 ; infill
 G1 X106.701 Y138.001 E6.18755 ; infill
 G1 X106.143 Y138.001 E6.21347 ; infill
 G1 X106.143 Y138.743 E6.24790 ; infill
 G1 X105.585 Y138.779 E6.27388 ; infill
 G1 X105.585 Y138.001 E6.30996 ; infill
 G1 X105.026 Y138.001 E6.33588 ; infill
 G1 X105.026 Y138.779 E6.37197 ; infill
 G1 X104.468 Y138.779 E6.39789 ; infill
 G1 X104.468 Y138.001 E6.43398 ; infill
 G1 X103.909 Y138.001 E6.45990 ; infill
 G1 X103.909 Y138.779 E6.49599 ; infill
 G1 X103.351 Y138.779 E6.52191 ; infill
 G1 X103.351 Y138.001 E6.55800 ; infill
 G1 X102.793 Y138.001 E6.58392 ; infill
 G1 X102.793 Y138.779 E6.62001 ; infill
 G1 X102.234 Y138.779 E6.64593 ; infill
 G1 X102.234 Y138.001 E6.68202 ; infill
 G1 X101.676 Y138.001 E6.70794 ; infill
 G1 X101.676 Y138.779 E6.74403 ; infill
 G1 X101.118 Y138.779 E6.76995 ; infill
 G1 X101.118 Y138.001 E6.80604 ; infill
 G1 X100.559 Y138.001 E6.83196 ; infill
 G1 X100.559 Y138.779 E6.86805 ; infill
 G1 X100.001 Y138.779 E6.89397 ; infill
 G1 X100.001 Y138.001 E6.93006 ; infill
 G1 X99.443 Y138.001 E6.95598 ; infill
 G1 X99.443 Y138.779 E6.99206 ; infill
 G1 X98.884 Y138.779 E7.01799 ; infill
 G1 X98.884 Y138.001 E7.05407 ; infill
 G1 X98.326 Y138.001 E7.08000 ; infill
 G1 X98.326 Y138.779 E7.11608 ; infill
 G1 X97.767 Y138.779 E7.14201 ; infill
 G1 X97.767 Y138.001 E7.17809 ; infill
 G1 X97.209 Y138.001 E7.20402 ; infill
 G1 X97.209 Y138.779 E7.24010 ; infill
 G1 X96.651 Y138.779 E7.26603 ; infill
 G1 X96.651 Y134.201 E7.47854 ; infill
 G1 X96.092 Y134.201 E7.50446 ; infill
 G1 X96.092 Y138.779 E7.71697 ; infill
 G1 X95.534 Y138.779 E7.74290 ; infill
 G1 X95.534 Y134.201 E7.95541 ; infill
 G1 X94.976 Y134.201 E7.98133 ; infill
 G1 X94.976 Y138.779 E8.19385 ; infill
 G1 X94.417 Y138.779 E8.21977 ; infill
 G1 X94.417 Y134.201 E8.43228 ; infill
 G1 X93.859 Y134.201 E8.45821 ; infill
 G1 X93.859 Y138.779 E8.67072 ; infill
 G1 X93.301 Y138.625 E8.69760 ; infill
 G1 X93.301 Y122.181 E9.46110 ; infill
 G1 X92.742 Y121.950 E9.48915 ; infill
 G1 X92.742 Y138.286 E10.24760 ; infill
 G1 X92.184 Y136.984 F12000.000 ; move to first infill point
 G1 X92.184 Y133.450 E10.41171 F7200.000 ; infill
 G1 F9600
 G1 X92.184 Y136.984 E9.57221 ; wipe and retract
 G1 E5.41171 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.800 F12000.000 ; lift Z
 G1 X107.818 Y135.966 F12000.000 ; move to first infill point
 G1 Z10.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X107.818 Y137.597 E5.07572 F7200.000 ; infill
 G1 F9600
 G1 X107.818 Y135.966 E4.68840 ; wipe and retract
 G1 E0.07572 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.800 F12000.000 ; lift Z
 G1 X91.703 Y119.744 F12000.000 ; move to first infill point
 G1 Z10.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.491 Y119.308 E5.01440 F1800.000 ; infill
 G1 X91.388 Y118.357 E5.04280 ; infill
 G1 F9600
 G1 X91.491 Y119.308 E4.81559 ; wipe and retract
 G1 F9600
 G1 X91.703 Y119.744 E4.70044 ; wipe and retract
 G1 E0.04280 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.800 F12000.000 ; lift Z
 G1 X101.878 Y122.197 F12000.000 ; move to first infill point
 G1 Z10.800 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X103.683 Y122.077 E5.05371 F1800.000 ; infill
 G1 X104.774 Y121.808 F12000.000 ; move to first infill point
 G1 X104.774 Y121.449 E5.07163 F7200.000 ; infill
 G1 X105.374 Y121.352 E5.10194 ; infill
 G1 X105.374 Y121.808 E5.12466 ; infill
 G1 X105.666 Y118.976 F12000.000 ; move to first infill point
 G1 X105.579 Y117.930 E5.19070 F1800.000 ; infill
 G1 X105.579 Y117.930 F12000.000 ; move to first infill point
 G1 X105.528 Y117.321 E5.20887 F1800.000 ; infill
 G1 X104.413 Y110.364 E5.41805 ; infill
 G1 X102.427 Y97.969 F12000.000 ; move to first infill point
 G1 X98.594 Y74.053 E6.94282 F1800.000 ; infill
 G1 X98.594 Y74.053 F12000.000 ; move to first infill point
 G1 X97.962 Y70.107 E7.06146 F1800.000 ; infill
 G1 X94.434 Y69.008 F12000.000 ; move to first infill point
 G1 X94.434 Y61.221 E7.45319 F7200.000 ; infill
 G1 X93.829 Y61.221 E7.48363 ; infill
 G1 X93.829 Y69.008 E7.87537 ; infill
 G1 X93.224 Y69.008 E7.90581 ; infill
 G1 X93.224 Y61.221 E8.29755 ; infill
 G1 X92.619 Y65.552 F12000.000 ; move to first infill point
 G1 X92.619 Y69.008 E8.47140 F7200.000 ; infill
 M106 S234.6 ; enable fan
 G1 F9600
 G1 X92.619 Y65.552 E7.65068 ; wipe and retract
 G1 E3.47140 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z11.800 F12000.000 ; lift Z
 G1 X95.608 Y132.215 F12000.000 ; move to first perimeter point
 G1 Z11.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X109.346 Y132.215 E5.40791 F7200.000 ; perimeter
 G1 X109.992 Y136.074 E5.52409 ; perimeter
 G1 X109.992 Y137.923 E5.57898 ; perimeter
 G1 X109.148 Y139.531 E5.63290 ; perimeter
 G1 X107.653 Y140.562 E5.68681 ; perimeter
 G1 X105.814 Y140.785 E5.74183 ; perimeter
 G1 X93.363 Y140.785 E6.11153 ; perimeter
 G1 X91.653 Y140.137 E6.16582 ; perimeter
 G1 X90.449 Y138.778 E6.21974 ; perimeter
 G1 X90.008 Y136.991 E6.27438 ; perimeter
 G1 X90.507 Y59.215 E8.58371 ; perimeter
 G1 X96.608 Y59.215 E8.76486 ; perimeter
 G1 X96.608 Y69.215 E9.06178 ; perimeter
 G1 X98.811 Y69.215 E9.12718 ; perimeter
 G1 X107.942 Y123.815 E10.77084 ; perimeter
 G1 X95.608 Y123.815 E11.13704 ; perimeter
 G1 X95.608 Y132.155 E11.38467 ; perimeter
 G1 X95.608 Y132.615 F12000.000 ; move inwards before travel
 G1 X95.251 Y132.572 F12000.000 ; move to first perimeter point
 G1 X98.451 Y132.572 E11.47968 F7200.000 ; perimeter
 G1 X98.451 Y136.372 E11.59251 ; perimeter
 G1 X105.165 Y136.372 E11.79186 ; perimeter
 G1 X105.165 Y132.572 E11.90469 ; perimeter
 G1 X109.044 Y132.572 E12.01986 ; perimeter
 G1 X109.635 Y136.104 E12.12618 ; perimeter
 G1 X109.635 Y137.835 E12.17758 ; perimeter
 G1 X108.873 Y139.287 E12.22627 ; perimeter
 G1 X107.523 Y140.218 E12.27496 ; perimeter
 G1 X105.792 Y140.428 E12.32672 ; perimeter
 G1 X93.428 Y140.428 E12.69384 ; perimeter
 G1 X91.862 Y139.834 E12.74357 ; perimeter
 G1 X90.774 Y138.607 E12.79226 ; perimeter
 G1 X90.366 Y136.949 E12.84297 ; perimeter
 G1 X90.862 Y59.572 E15.14044 ; perimeter
 G1 X96.251 Y59.572 E15.30046 ; perimeter
 G1 X96.251 Y69.572 E15.59737 ; perimeter
 G1 X98.509 Y69.572 E15.66441 ; perimeter
 G1 X107.520 Y123.458 E17.28656 ; perimeter
 G1 X95.251 Y123.458 E17.65085 ; perimeter
 G1 X95.251 Y132.512 E17.91968 ; perimeter
 G1 X94.894 Y132.929 F12000.000 ; move to first perimeter point
 G1 X98.094 Y132.929 E18.01469 F7200.000 ; perimeter
 G1 X98.094 Y136.729 E18.12751 ; perimeter
 G1 X105.522 Y136.729 E18.34807 ; perimeter
 G1 X105.522 Y132.929 E18.46090 ; perimeter
 G1 X108.742 Y132.929 E18.55649 ; perimeter
 G1 X109.278 Y136.133 E18.65296 ; perimeter
 G1 X109.278 Y137.747 E18.70086 ; perimeter
 G1 X108.597 Y139.043 E18.74432 ; perimeter
 G1 X107.393 Y139.874 E18.78779 ; perimeter
 G1 X105.771 Y140.071 E18.83630 ; perimeter
 G1 X93.493 Y140.071 E19.20083 ; perimeter
 G1 X92.071 Y139.532 E19.24601 ; perimeter
 G1 X91.100 Y138.436 E19.28947 ; perimeter
 G1 X90.723 Y136.906 E19.33624 ; perimeter
 G1 X91.216 Y59.929 E21.62186 ; perimeter
 G1 X95.894 Y59.929 E21.76074 ; perimeter
 G1 X95.894 Y69.929 E22.05765 ; perimeter
 G1 X98.206 Y69.929 E22.12631 ; perimeter
 G1 X107.098 Y123.100 E23.72697 ; perimeter
 G1 X94.894 Y123.100 E24.08933 ; perimeter
 G1 X94.894 Y132.869 E24.37937 ; perimeter
 G1 X94.537 Y133.286 F12000.000 ; move to first perimeter point
 G1 X97.737 Y133.286 E24.47438 F7200.000 ; perimeter
 G1 X97.737 Y137.086 E24.58721 ; perimeter
 G1 X105.879 Y137.086 E24.82897 ; perimeter
 G1 X105.879 Y133.286 E24.94179 ; perimeter
 G1 X108.440 Y133.286 E25.01781 ; perimeter
 G1 X108.921 Y136.163 E25.10442 ; perimeter
 G1 X108.921 Y137.659 E25.14883 ; perimeter
 G1 X108.322 Y138.799 E25.18707 ; perimeter
 G1 X107.262 Y139.530 E25.22530 ; perimeter
 G1 X105.749 Y139.714 E25.27056 ; perimeter
 G1 X93.559 Y139.714 E25.63250 ; perimeter
 G1 X92.280 Y139.229 E25.67313 ; perimeter
 G1 X91.426 Y138.265 E25.71136 ; perimeter
 G1 X91.080 Y136.864 E25.75420 ; perimeter
 G1 X91.571 Y60.286 E28.02796 ; perimeter
 G1 X95.537 Y60.286 E28.14571 ; perimeter
 G1 X95.537 Y69.943 E28.43245 ; perimeter
 G1 X91.819 Y69.943 E28.54283 ; perimeter
 G1 X91.536 Y118.153 E29.97425 ; perimeter
 G1 X91.886 Y119.700 E30.02136 ; perimeter
 G1 X92.975 Y121.041 E30.07265 ; perimeter
 G1 X94.490 Y121.668 E30.12135 ; perimeter
 G1 X101.702 Y121.668 E30.33547 ; perimeter
 G1 X103.161 Y121.475 E30.37918 ; perimeter
 G1 X104.541 Y120.436 E30.43047 ; perimeter
 G1 X105.290 Y118.879 E30.48177 ; perimeter
 G1 X105.290 Y117.343 E30.52737 ; perimeter
 G1 X102.350 Y98.162 E31.10353 ; perimeter
 G1 X102.560 Y98.128 E31.10985 ; perimeter
 G1 X106.677 Y122.743 E31.85085 ; perimeter
 G1 X94.537 Y122.743 E32.21129 ; perimeter
 G1 X94.537 Y133.226 E32.52253 ; perimeter
 G1 F9600
 G1 X97.737 Y133.286 E31.76240 ; wipe and retract
 G1 F9600
 G1 X97.737 Y137.086 E30.85990 ; wipe and retract
 G1 F9600
 G1 X105.879 Y137.086 E28.92606 ; wipe and retract
 G1 F9600
 G1 X105.879 Y133.286 E28.02356 ; wipe and retract
 G1 F9600
 G1 X106.936 Y133.286 E27.77253 ; wipe and retract
 G1 E27.52253 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z12.000 F12000.000 ; lift Z
 G1 X95.180 Y69.586 F12000.000 ; move to first perimeter point
 G1 Z11.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X91.869 Y69.586 E5.09831 F7200.000 ; perimeter
 G1 X91.926 Y60.643 E5.36386 ; perimeter
 G1 X95.180 Y60.643 E5.46047 ; perimeter
 G1 X95.180 Y69.526 E5.72422 ; perimeter
 G1 X94.823 Y69.229 F12000.000 ; move to first perimeter point
 G1 X92.228 Y69.229 E5.80126 F7200.000 ; perimeter
 G1 X92.281 Y61.000 E6.04560 ; perimeter
 G1 X94.823 Y61.000 E6.12108 ; perimeter
 G1 X94.823 Y69.169 E6.36363 ; perimeter
 G1 F9600
 G1 X92.228 Y69.229 E5.74724 ; wipe and retract
 G1 F9600
 G1 X92.281 Y61.000 E3.79276 ; wipe and retract
 G1 F9600
 G1 X94.823 Y61.000 E3.18906 ; wipe and retract
 G1 F9600
 G1 X94.823 Y67.633 E1.61363 ; wipe and retract
 G1 E1.36363 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z12.000 F12000.000 ; lift Z
 G1 X94.180 Y122.386 F12000.000 ; move to first perimeter point
 G1 Z11.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X94.180 Y133.643 E5.33422 F7200.000 ; perimeter
 G1 X97.380 Y133.643 E5.42924 ; perimeter
 G1 X97.380 Y137.443 E5.54206 ; perimeter
 G1 X106.236 Y137.443 E5.80503 ; perimeter
 G1 X106.236 Y133.643 E5.91785 ; perimeter
 G1 X108.137 Y133.643 E5.97429 ; perimeter
 G1 X108.564 Y136.193 E6.05104 ; perimeter
 G1 X108.564 Y137.571 E6.09196 ; perimeter
 G1 X108.047 Y138.555 E6.12497 ; perimeter
 G1 X107.132 Y139.187 E6.15798 ; perimeter
 G1 X105.728 Y139.357 E6.19998 ; perimeter
 G1 X93.624 Y139.357 E6.55934 ; perimeter
 G1 X92.488 Y138.926 E6.59541 ; perimeter
 G1 X91.751 Y138.094 E6.62842 ; perimeter
 G1 X91.438 Y136.822 E6.66732 ; perimeter
 G1 X91.546 Y119.849 E7.17128 ; perimeter
 G1 X92.754 Y121.337 E7.22818 ; perimeter
 G1 X94.419 Y122.025 E7.28168 ; perimeter
 G1 X101.725 Y122.025 E7.49860 ; perimeter
 G1 X103.301 Y121.817 E7.54579 ; perimeter
 G1 X104.825 Y120.669 E7.60245 ; perimeter
 G1 X105.561 Y119.141 E7.65279 ; perimeter
 G1 X105.716 Y119.163 E7.65745 ; perimeter
 G1 X106.255 Y122.386 E7.75447 ; perimeter
 G1 X94.240 Y122.386 E8.11121 ; perimeter
 G1 X103.856 Y122.029 F12000.000 ; move to first perimeter point
 G1 X103.807 Y121.883 E8.11579 F7200.000 ; perimeter
 G1 X105.110 Y120.902 E8.16422 ; perimeter
 G1 X105.394 Y120.311 E8.18370 ; perimeter
 G1 X105.549 Y120.333 E8.18835 ; perimeter
 G1 X105.833 Y122.029 E8.23942 ; perimeter
 G1 X103.916 Y122.029 E8.29635 ; perimeter
 G1 F9600
 G1 X103.807 Y121.883 E8.25304 ; wipe and retract
 G1 F9600
 G1 X105.110 Y120.902 E7.86568 ; wipe and retract
 G1 F9600
 G1 X105.394 Y120.311 E7.70986 ; wipe and retract
 G1 F9600
 G1 X105.549 Y120.333 E7.67261 ; wipe and retract
 G1 F9600
 G1 X105.833 Y122.029 E7.26411 ; wipe and retract
 G1 F9600
 G1 X103.916 Y122.029 E6.80871 ; wipe and retract
 G1 E3.29635 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z12.000 F12000.000 ; lift Z
 G1 X93.823 Y134.000 F12000.000 ; move to first perimeter point
 G1 Z11.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.023 Y134.000 E5.09501 F7200.000 ; perimeter
 G1 X97.023 Y137.800 E5.20784 ; perimeter
 G1 X106.593 Y137.800 E5.49201 ; perimeter
 G1 X106.593 Y134.000 E5.60483 ; perimeter
 G1 X107.835 Y134.000 E5.64169 ; perimeter
 G1 X108.207 Y136.222 E5.70859 ; perimeter
 G1 X108.207 Y137.482 E5.74601 ; perimeter
 G1 X107.772 Y138.311 E5.77380 ; perimeter
 G1 X107.001 Y138.843 E5.80158 ; perimeter
 G1 X105.706 Y139.000 E5.84033 ; perimeter
 G1 X93.690 Y139.000 E6.19710 ; perimeter
 G1 X92.697 Y138.624 E6.22862 ; perimeter
 G1 X92.077 Y137.923 E6.25640 ; perimeter
 G1 X91.795 Y136.780 E6.29137 ; perimeter
 G1 X91.897 Y120.847 E6.76443 ; perimeter
 G1 X92.534 Y121.632 E6.79444 ; perimeter
 G1 X93.823 Y122.165 E6.83584 ; perimeter
 G1 X93.823 Y133.940 E7.18545 ; perimeter
 G1 F9600
 G1 X97.023 Y134.000 E6.42532 ; wipe and retract
 G1 F9600
 G1 X97.023 Y137.800 E5.52282 ; wipe and retract
 G1 F9600
 G1 X106.593 Y137.800 E3.24976 ; wipe and retract
 G1 F9600
 G1 X106.593 Y134.371 E2.43545 ; wipe and retract
 G1 E2.18545 F2400.00000 ; retract
 G92 E0 ; reset extrusion distance
 G1 Z12.000 F12000.000 ; lift Z
 G1 X92.884 Y71.015 F12000.000 ; move to first perimeter point
 G1 Z11.000 F12000.000 ; restore layer Z
 G1 E5.00000 F2400.00000 ; unretract
 G1 X97.105 Y71.015 E5.12531 F7200.000 ; perimeter
 G1 X104.219 Y117.425 E6.51939 ; perimeter
 G1 X104.219 Y118.635 E6.55531 ; perimeter
 G1 X103.689 Y119.737 E6.59162 ; perimeter
 G1 X102.742 Y120.450 E6.62683 ; perimeter
 G1 X101.631 Y120.597 E6.66009 ; perimeter
 G1 X94.703 Y120.597 E6.86579 ; perimeter
 G1 X93.635 Y120.155 E6.90011 ; perimeter
 G1 X92.875 Y119.220 E6.93589 ; perimeter
 G1 X92.608 Y118.036 E6.97191 ; perimeter
 G1 X92.884 Y71.075 E8.36629 ; perimeter
 G1 X92.885 Y70.615 F12000.000 ; move inwards before travel
 G1 X92.529 Y70.658 F12000.000 ; move to first perimeter point
 G1 X97.411 Y70.658 E8.51124 F7200.000 ; perimeter
 G1 X104.576 Y117.398 E9.91523 ; perimeter
 G1 X104.576 Y118.716 E9.95438 ; perimeter
 G1 X103.973 Y119.970 E9.99568 ; perimeter
 G1 X102.881 Y120.792 E10.03626 ; perimeter
 G1 X101.655 Y120.954 E10.07300 ; perimeter
 G1 X94.632 Y120.954 E10.28150 ; perimeter
 G1 X93.415 Y120.451 E10.32062 ; perimeter
 G1 X92.545 Y119.380 E10.36157 ; perimeter
 G1 X92.251 Y118.075 E10.40129 ; perimeter
 G1 X92.529 Y70.718 E11.80742 ; perimeter
 G1 X92.174 Y70.300 F12000.000 ; move to first perimet
No results found