hyperair · February 7, 2015 14:50
diff --git a/sharpening-jig.gcode b/sharpening-jig.gcode
 ; generated by Slic3r 1.2.6 on 2015-02-07 at 22:35:14

 ; external perimeters extrusion width = 0.40mm
 ; perimeters extrusion width = 0.60mm
 ; infill extrusion width = 0.60mm
 ; solid infill extrusion width = 0.60mm
 ; top infill extrusion width = 0.40mm
 ; support material extrusion width = 1.00mm

 M127 ; disable fan
 M109 S55 ; set bed temperature
 M135 T1; set primary extruder
 M73 P0; enable show build progress
 M109 S55 ; heat bed up to first layer temperature
 M104 S195 T1; set nozzle heater to first layer temperature
 M103; disable RPM
 G21; set units to mm
 G162 X Y F6000; home XY axes maximum
 G161 Z F9000; home Z axis minimum
 G92 Z0; set Z to 0
 M132 X Y Z A B; Recall stored home offsets
 G90; set positioning to absolute
 G1 Z30; move Z to waiting height
 G1 X-95 Y-73 Z30 F14000; move to waiting position (front left corner of print bed)
 G130 X0 Y0 A0 B0; set stepper motor vref to lower value while heating
 M6 T1; wait for bed and extruder to heat up
 G130 X127 Y127 A0 B100; set stepper motor vref to defaults
 M108 T1 R3; set extruder speed
 G92 E0; set E to 0
 G90; use absolute coordinates
 M320; acceleration enabled for all commands that follow
 G1 Z0.3 F6000.000; move to first layer height
 G1 X100 Y-73 F14000.000; move to front right corner of bed
 G1 X-90 Y-73 E24 F2000.000; extrude a line of filament across the front edge of the bed
 G4 P2000; wait for ooze to slow
 G1 Z0 F6000.000; lower nozzle height to 0
 G1 X-95; wipe nozzle
 G1 Z0.3 F6000.000; set nozzle to first layer height
 G1 F12000; ensure fast travel to first print move
 G92 E0; set E to 0 again
 M73 P0; reset build progress to 0
 G21 ; set units to millimeters
 G90 ; use absolute coordinates
 M73 P0 ; update progress
 G1 E-2.00000 F1800.00000 ; retract
 G1 Z0.300 F7200.000 ; move to next layer (0)
 G1 X0.000 Y16.936 F7200.000 ; move to first skirt point
 G1 E0.00000 F1800.00000 ; unretract
 G1 X-20.000 Y16.936 E2.33391 F1200.000 ; skirt
 G1 X-22.313 Y16.539 E2.60780 ; skirt
 G1 X-24.361 Y15.393 E2.88169 ; skirt
 G1 X-25.910 Y13.629 E3.15557 ; skirt
 G1 X-26.782 Y11.450 E3.42946 ; skirt
 G1 X-26.936 Y10.000 E3.59964 ; skirt
 G1 X-26.936 Y-10.000 E5.93355 ; skirt
 G1 X-26.539 Y-12.313 E6.20743 ; skirt
 G1 X-25.393 Y-14.361 E6.48132 ; skirt
 G1 X-23.629 Y-15.910 E6.75521 ; skirt
 G1 X-21.450 Y-16.782 E7.02909 ; skirt
 G1 X-20.000 Y-16.936 E7.19927 ; skirt
 G1 X20.000 Y-16.936 E11.86710 ; skirt
 G1 X22.313 Y-16.539 E12.14098 ; skirt
 G1 X24.361 Y-15.393 E12.41487 F1200.000 ; skirt
 G1 X25.910 Y-13.629 E12.68876 ; skirt
 G1 X26.782 Y-11.450 E12.96264 ; skirt
 G1 X26.936 Y-10.000 E13.13282 ; skirt
 G1 X26.936 Y10.000 E15.46673 ; skirt
 G1 X26.539 Y12.313 E15.74062 ; skirt
 G1 X25.393 Y14.361 E16.01450 ; skirt
 G1 X23.629 Y15.910 E16.28839 ; skirt
 G1 X21.450 Y16.782 E16.56228 ; skirt
 G1 X20.000 Y16.936 E16.73245 ; skirt
 G1 X0.060 Y16.936 E19.05936 ; skirt
 G1 F5760
 G1 X-6.340 Y16.936 E17.15936 ; retract
 G1 E17.05936 F1800.00000 ; retract
 G1 X-17.629 Y7.629 F7200.000 ; move to first perimeter point
 G1 E19.05936 F1800.00000 ; unretract
 G1 X-17.629 Y-7.629 E20.83985 F1200.000 ; perimeter
 G1 X17.629 Y-7.629 E24.95425 ; perimeter
 G1 X17.629 Y7.629 E26.73473 ; perimeter
 G1 X-17.569 Y7.629 E30.84213 ; perimeter
 G1 X-18.564 Y8.564 F7200.000 ; move to first perimeter point
 G1 X-18.564 Y-8.564 E32.84098 F1200.000 ; perimeter
 G1 X18.564 Y-8.564 E37.17375 ; perimeter
 G1 X18.564 Y8.564 E39.17260 ; perimeter
 G1 X-18.504 Y8.564 E43.49836 ; perimeter
 G1 X-19.500 Y9.500 F7200.000 ; move to first perimeter point
 G1 X-19.500 Y-9.500 E45.71558 F1200.000 ; perimeter
 G1 X19.500 Y-9.500 E50.26671 ; perimeter
 G1 X19.500 Y9.500 E52.48392 ; perimeter
 G1 X-19.440 Y9.500 E57.02805 ; perimeter
 G1 X-19.300 Y9.154 F7200.000 ; move inwards before travel
 G1 X-17.124 Y6.843 F7200.000 ; move to first infill point
 G1 X17.124 Y6.843 E61.20391 F1200.000 ; infill
 G1 X17.124 Y5.866 E61.32311 ; infill
 G1 X-17.124 Y5.866 E65.49896 ; infill
 G1 X-17.124 Y4.888 E65.61816 ; infill
 G1 X17.124 Y4.888 E69.79402 ; infill
 G1 X17.124 Y3.910 E69.91322 ; infill
 G1 X-17.124 Y3.910 E74.08908 ; infill
 G1 X-17.124 Y2.933 E74.20828 ; infill
 G1 X17.124 Y2.933 E78.38413 ; infill
 G1 X17.124 Y1.955 E78.50333 ; infill
 G1 X-17.124 Y1.955 E82.67919 ; infill
 G1 X-17.124 Y0.978 E82.79839 ; infill
 G1 X17.124 Y0.978 E86.97425 ; infill
 G1 X17.124 Y0.000 E87.09344 ; infill
 G1 X-17.124 Y0.000 E91.26930 ; infill
 G1 X-17.124 Y-0.978 E91.38850 ; infill
 G1 X17.124 Y-0.978 E95.56436 ; infill
 G1 X17.124 Y-1.955 E95.68356 ; infill
 G1 X-17.124 Y-1.955 E99.85941 ; infill
 G1 X-17.124 Y-2.933 E99.97861 ; infill
 G1 X17.124 Y-2.933 E104.15447 ; infill
 G1 X17.124 Y-3.910 E104.27367 ; infill
 G1 X-17.124 Y-3.910 E108.44953 ; infill
 G1 X-17.124 Y-4.888 E108.56873 ; infill
 G1 X17.124 Y-4.888 E112.74458 ; infill
 G1 X17.124 Y-5.866 E112.86378 ; infill
 G1 X-17.124 Y-5.866 E117.03964 ; infill
 G1 X-17.124 Y-6.843 E117.15884 ; infill
 G1 X17.124 Y-6.843 E121.33470 ; infill
 M73 P1 ; update progress
 G1 F5760
 G1 X10.724 Y-6.843 E119.43470 ; retract
 G1 E119.33470 F1800.00000 ; retract
 G1 Z0.300 F7200.000 ; move to next layer (0)
 M126 ; enable fan
 M73 P3 ; update progress
 G1 Z0.500 F7200.000 ; move to next layer (1)
 G1 X-18.786 Y8.786 F7200.000 ; move to first perimeter point
 G1 E121.33470 F1800.00000 ; unretract
 G1 X-18.786 Y-8.786 E122.14864 F1124.180 ; perimeter
 G1 X18.786 Y-8.786 E123.88901 ; perimeter
 G1 X18.786 Y8.786 E124.70296 ; perimeter
 G1 X-18.726 Y8.786 E126.44055 ; perimeter
 G1 X-19.343 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y-9.343 E127.30610 F1124.180 ; perimeter
 G1 X19.343 Y-9.343 E129.09808 ; perimeter
 G1 X19.343 Y9.343 E129.96364 ; perimeter
 G1 X-19.283 Y9.343 E131.75284 ; perimeter
 G1 X-19.800 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y-9.800 E132.33479 F749.453 ; perimeter
 G1 X19.800 Y-9.800 E133.51056 ; perimeter
 G1 X19.800 Y9.800 E134.09251 ; perimeter
 G1 X-19.740 Y9.800 E135.26651 ; perimeter
 G1 X-19.600 Y9.454 F7200.000 ; move inwards before travel
 G1 X-18.319 Y8.486 F7200.000 ; move to first infill point
 G1 X-18.319 Y-8.486 E136.06194 F3747.266 ; infill
 G1 X-17.755 Y-8.486 E136.08836 ; infill
 G1 X-17.755 Y8.486 E136.88380 ; infill
 G1 X-17.192 Y8.486 E136.91022 ; infill
 G1 X-17.192 Y-8.486 E137.70565 ; infill
 G1 X-16.628 Y-8.486 E137.73207 ; infill
 G1 X-16.628 Y8.486 E138.52751 ; infill
 G1 X-16.064 Y8.486 E138.55392 ; infill
 G1 X-16.064 Y-8.486 E139.34936 ; infill
 G1 X-15.501 Y-8.486 E139.37578 ; infill
 G1 X-15.501 Y8.486 E140.17122 ; infill
 G1 X-14.937 Y8.486 E140.19763 ; infill
 G1 X-14.937 Y-8.486 E140.99307 ; infill
 G1 X-14.373 Y-8.486 E141.01949 ; infill
 G1 X-14.373 Y8.486 E141.81493 ; infill
 G1 X-13.810 Y8.486 E141.84134 ; infill
 G1 X-13.810 Y-8.486 E142.63678 ; infill
 G1 X-13.246 Y-8.486 E142.66320 ; infill
 G1 X-13.246 Y8.486 E143.45864 ; infill
 G1 X-12.682 Y8.486 E143.48505 ; infill
 G1 X-12.682 Y-8.486 E144.28049 ; infill
 G1 X-12.119 Y-8.486 E144.30691 ; infill
 G1 X-12.119 Y8.486 E145.10235 ; infill
 G1 X-11.555 Y8.486 E145.12876 ; infill
 G1 X-11.555 Y-8.486 E145.92420 ; infill
 G1 X-10.991 Y-8.486 E145.95062 ; infill
 G1 X-10.991 Y8.486 E146.74606 ; infill
 G1 X-10.428 Y8.486 E146.77247 ; infill
 G1 X-10.428 Y-8.486 E147.56791 ; infill
 G1 X-9.864 Y-8.486 E147.59433 ; infill
 G1 X-9.864 Y8.486 E148.38977 ; infill
 G1 X-9.300 Y8.486 E148.41618 ; infill
 G1 X-9.300 Y-8.486 E149.21162 ; infill
 G1 X-8.737 Y-8.486 E149.23804 ; infill
 G1 X-8.737 Y8.486 E150.03347 ; infill
 G1 X-8.173 Y8.486 E150.05989 ; infill
 G1 X-8.173 Y-8.486 E150.85533 ; infill
 G1 X-7.609 Y-8.486 E150.88175 ; infill
 G1 X-7.609 Y8.486 E151.67718 ; infill
 G1 X-7.046 Y8.486 E151.70360 ; infill
 G1 X-7.046 Y-8.486 E152.49904 ; infill
 G1 X-6.482 Y-8.486 E152.52546 ; infill
 G1 X-6.482 Y8.486 E153.32089 ; infill
 G1 X-5.918 Y8.486 E153.34731 ; infill
 G1 X-5.918 Y-8.486 E154.14275 ; infill
 G1 X-5.355 Y-8.486 E154.16917 ; infill
 G1 X-5.355 Y8.486 E154.96460 ; infill
 G1 X-4.791 Y8.486 E154.99102 ; infill
 G1 X-4.791 Y-8.486 E155.78646 ; infill
 G1 X-4.227 Y-8.486 E155.81288 ; infill
 G1 X-4.227 Y8.486 E156.60831 ; infill
 G1 X-3.664 Y8.486 E156.63473 ; infill
 G1 X-3.664 Y-8.486 E157.43017 ; infill
 G1 X-3.100 Y-8.486 E157.45659 ; infill
 G1 X-3.100 Y8.486 E158.25202 ; infill
 G1 X-2.536 Y8.486 E158.27844 ; infill
 G1 X-2.536 Y-8.486 E159.07388 ; infill
 G1 X-1.973 Y-8.486 E159.10030 ; infill
 G1 X-1.973 Y8.486 E159.89573 ; infill
 G1 X-1.409 Y8.486 E159.92215 ; infill
 G1 X-1.409 Y-8.486 E160.71759 ; infill
 G1 X-0.846 Y-8.486 E160.74401 ; infill
 G1 X-0.846 Y8.486 E161.53944 ; infill
 G1 X-0.282 Y8.486 E161.56586 ; infill
 G1 X-0.282 Y-8.486 E162.36130 ; infill
 G1 X0.282 Y-8.486 E162.38771 ; infill
 G1 X0.282 Y8.486 E163.18315 ; infill
 G1 X0.845 Y8.486 E163.20957 ; infill
 G1 X0.845 Y-8.486 E164.00501 ; infill
 G1 X1.409 Y-8.486 E164.03142 ; infill
 G1 X1.409 Y8.486 E164.82686 ; infill
 G1 X1.973 Y8.486 E164.85328 ; infill
 G1 X1.973 Y-8.486 E165.64872 ; infill
 G1 X2.536 Y-8.486 E165.67513 ; infill
 G1 X2.536 Y8.486 E166.47057 ; infill
 G1 X3.100 Y8.486 E166.49699 ; infill
 G1 X3.100 Y-8.486 E167.29243 ; infill
 G1 X3.664 Y-8.486 E167.31884 ; infill
 G1 X3.664 Y8.486 E168.11428 ; infill
 G1 X4.227 Y8.486 E168.14070 ; infill
 G1 X4.227 Y-8.486 E168.93614 ; infill
 G1 X4.791 Y-8.486 E168.96255 ; infill
 G1 X4.791 Y8.486 E169.75799 ; infill
 G1 X5.355 Y8.486 E169.78441 ; infill
 G1 X5.355 Y-8.486 E170.57985 ; infill
 G1 X5.918 Y-8.486 E170.60626 ; infill
 G1 X5.918 Y8.486 E171.40170 ; infill
 G1 X6.482 Y8.486 E171.42812 ; infill
 G1 X6.482 Y-8.486 E172.22356 ; infill
 G1 X7.046 Y-8.486 E172.24997 ; infill
 G1 X7.046 Y8.486 E173.04541 ; infill
 G1 X7.609 Y8.486 E173.07183 ; infill
 G1 X7.609 Y-8.486 E173.86727 ; infill
 G1 X8.173 Y-8.486 E173.89368 ; infill
 G1 X8.173 Y8.486 E174.68912 ; infill
 G1 X8.737 Y8.486 E174.71554 ; infill
 G1 X8.737 Y-8.486 E175.51097 ; infill
 G1 X9.300 Y-8.486 E175.53739 ; infill
 G1 X9.300 Y8.486 E176.33283 ; infill
 G1 X9.864 Y8.486 E176.35925 ; infill
 G1 X9.864 Y-8.486 E177.15468 ; infill
 G1 X10.428 Y-8.486 E177.18110 ; infill
 G1 X10.428 Y8.486 E177.97654 ; infill
 G1 X10.991 Y8.486 E178.00296 ; infill
 G1 X10.991 Y-8.486 E178.79839 ; infill
 G1 X11.555 Y-8.486 E178.82481 ; infill
 G1 X11.555 Y8.486 E179.62025 ; infill
 G1 X12.119 Y8.486 E179.64667 ; infill
 G1 X12.119 Y-8.486 E180.44210 ; infill
 G1 X12.682 Y-8.486 E180.46852 ; infill
 G1 X12.682 Y8.486 E181.26396 ; infill
 G1 X13.246 Y8.486 E181.29038 ; infill
 G1 X13.246 Y-8.486 E182.08581 ; infill
 G1 X13.810 Y-8.486 E182.11223 ; infill
 G1 X13.810 Y8.486 E182.90767 ; infill
 G1 X14.373 Y8.486 E182.93409 ; infill
 G1 X14.373 Y-8.486 E183.72952 ; infill
 G1 X14.937 Y-8.486 E183.75594 ; infill
 G1 X14.937 Y8.486 E184.55138 ; infill
 G1 X15.501 Y8.486 E184.57780 ; infill
 G1 X15.501 Y-8.486 E185.37323 ; infill
 G1 X16.064 Y-8.486 E185.39965 ; infill
 G1 X16.064 Y8.486 E186.19509 ; infill
 G1 X16.628 Y8.486 E186.22151 ; infill
 G1 X16.628 Y-8.486 E187.01694 ; infill
 G1 X17.191 Y-8.486 E187.04336 ; infill
 G1 X17.191 Y8.486 E187.83880 ; infill
 G1 X17.755 Y8.486 E187.86521 ; infill
 G1 X17.755 Y-8.486 E188.66065 ; infill
 G1 X18.319 Y-8.486 E188.68707 ; infill
 G1 X18.319 Y8.486 E189.48251 ; infill
 M73 P5 ; update progress
 G1 F5760
 G1 X18.319 Y2.086 E187.58251 ; retract
 G1 E187.48251 F1800.00000 ; retract
 G1 Z0.700 F7200.000 ; move to next layer (2)
 G1 X-18.786 Y8.786 F7200.000 ; move to first perimeter point
 G1 E189.48251 F1800.00000 ; unretract
 G1 X-18.786 Y-8.786 E190.29645 F1110.237 ; perimeter
 G1 X18.786 Y-8.786 E192.03682 ; perimeter
 G1 X18.786 Y8.786 E192.85077 ; perimeter
 G1 X-18.726 Y8.786 E194.58836 ; perimeter
 G1 X-19.343 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y-9.343 E195.45391 F1110.237 ; perimeter
 G1 X19.343 Y-9.343 E197.24589 ; perimeter
 G1 X19.343 Y9.343 E198.11145 ; perimeter
 G1 X-19.283 Y9.343 E199.90065 ; perimeter
 G1 X-19.800 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y-9.800 E200.48260 F740.158 ; perimeter
 G1 X19.800 Y-9.800 E201.65837 ; perimeter
 G1 X19.800 Y9.800 E202.24032 ; perimeter
 G1 X-19.740 Y9.800 E203.41432 ; perimeter
 G1 X-19.600 Y9.454 F7200.000 ; move inwards before travel
 G1 X18.486 Y8.319 F7200.000 ; move to first infill point
 G1 X-18.486 Y8.319 E205.17803 F3700.788 ; infill
 G1 X-18.486 Y7.745 E205.20539 ; infill
 G1 X18.486 Y7.745 E206.96910 ; infill
 G1 X18.486 Y7.171 E206.99647 ; infill
 G1 X-18.486 Y7.171 E208.76018 ; infill
 G1 X-18.486 Y6.598 E208.78755 ; infill
 G1 X18.486 Y6.598 E210.55126 ; infill
 G1 X18.486 Y6.024 E210.57863 ; infill
 G1 X-18.486 Y6.024 E212.34234 ; infill
 G1 X-18.486 Y5.450 E212.36970 ; infill
 G1 X18.486 Y5.450 E214.13341 ; infill
 G1 X18.486 Y4.877 E214.16078 ; infill
 G1 X-18.486 Y4.877 E215.92449 ; infill
 G1 X-18.486 Y4.303 E215.95186 ; infill
 G1 X18.486 Y4.303 E217.71557 ; infill
 G1 X18.486 Y3.729 E217.74294 ; infill
 G1 X-18.486 Y3.729 E219.50665 ; infill
 G1 X-18.486 Y3.155 E219.53401 ; infill
 G1 X18.486 Y3.155 E221.29772 ; infill
 G1 X18.486 Y2.582 E221.32509 ; infill
 G1 X-18.486 Y2.582 E223.08880 ; infill
 G1 X-18.486 Y2.008 E223.11617 ; infill
 G1 X18.486 Y2.008 E224.87988 ; infill
 G1 X18.486 Y1.434 E224.90725 ; infill
 G1 X-18.486 Y1.434 E226.67096 ; infill
 G1 X-18.486 Y0.861 E226.69832 ; infill
 G1 X18.486 Y0.861 E228.46203 ; infill
 G1 X18.486 Y0.287 E228.48940 ; infill
 G1 X-18.486 Y0.287 E230.25311 ; infill
 G1 X-18.486 Y-0.287 E230.28048 ; infill
 G1 X18.486 Y-0.287 E232.04419 ; infill
 G1 X18.486 Y-0.861 E232.07156 ; infill
 G1 X-18.486 Y-0.861 E233.83527 ; infill
 G1 X-18.486 Y-1.434 E233.86264 ; infill
 G1 X18.486 Y-1.434 E235.62634 ; infill
 G1 X18.486 Y-2.008 E235.65371 ; infill
 G1 X-18.486 Y-2.008 E237.41742 ; infill
 G1 X-18.486 Y-2.582 E237.44479 ; infill
 G1 X18.486 Y-2.582 E239.20850 ; infill
 G1 X18.486 Y-3.155 E239.23587 ; infill
 G1 X-18.486 Y-3.155 E240.99958 ; infill
 G1 X-18.486 Y-3.729 E241.02695 ; infill
 G1 X18.486 Y-3.729 E242.79065 ; infill
 G1 X18.486 Y-4.303 E242.81802 ; infill
 G1 X-18.486 Y-4.303 E244.58173 ; infill
 G1 X-18.486 Y-4.877 E244.60910 ; infill
 G1 X18.486 Y-4.877 E246.37281 ; infill
 G1 X18.486 Y-5.450 E246.40018 ; infill
 G1 X-18.486 Y-5.450 E248.16389 ; infill
 G1 X-18.486 Y-6.024 E248.19126 ; infill
 G1 X18.486 Y-6.024 E249.95497 ; infill
 G1 X18.486 Y-6.598 E249.98233 ; infill
 G1 X-18.486 Y-6.598 E251.74604 ; infill
 G1 X-18.486 Y-7.171 E251.77341 ; infill
 G1 X18.486 Y-7.171 E253.53712 ; infill
 G1 X18.486 Y-7.745 E253.56449 ; infill
 G1 X-18.486 Y-7.745 E255.32820 ; infill
 G1 X-18.486 Y-8.319 E255.35557 ; infill
 G1 X18.486 Y-8.319 E257.11928 ; infill
 M73 P7 ; update progress
 G1 F5760
 G1 X12.086 Y-8.319 E255.21928 ; retract
 G1 E255.11928 F1800.00000 ; retract
 G1 Z0.900 F7200.000 ; move to next layer (3)
 G1 X-18.786 Y8.786 F7200.000 ; move to first perimeter point
 G1 E257.11928 F1800.00000 ; unretract
 G1 X-18.786 Y-8.786 E257.93322 F663.012 ; perimeter
 G1 X18.786 Y-8.786 E259.67359 ; perimeter
 G1 X18.786 Y8.786 E260.48754 ; perimeter
 G1 X-18.726 Y8.786 E262.22513 ; perimeter
 G1 X-19.343 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y-9.343 E263.09068 F663.012 ; perimeter
 G1 X19.343 Y-9.343 E264.88266 ; perimeter
 G1 X19.343 Y9.343 E265.74822 ; perimeter
 G1 X-19.283 Y9.343 E267.53742 ; perimeter
 G1 X-19.800 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y-9.800 E268.11937 F442.008 ; perimeter
 G1 X19.800 Y-9.800 E269.29514 ; perimeter
 G1 X19.800 Y9.800 E269.87709 ; perimeter
 G1 X-19.740 Y9.800 E271.05108 ; perimeter
 G1 X-19.600 Y9.454 F7200.000 ; move inwards before travel
 G1 X-15.708 Y8.506 F7200.000 ; move to first infill point
 G1 X-15.708 Y-8.486 E271.83817 F2210.039 ; infill
 G1 X-15.151 Y-8.486 E271.86397 ; infill
 G1 X-5.427 Y8.506 E272.77083 ; infill
 G1 X-4.566 Y8.506 E272.81069 ; infill
 G1 X-4.566 Y-8.486 E273.59777 ; infill
 G1 X-4.009 Y-8.486 E273.62357 ; infill
 G1 X5.715 Y8.506 E274.53043 ; infill
 G1 X6.575 Y8.506 E274.57029 ; infill
 G1 X6.575 Y-8.486 E275.35737 ; infill
 G1 X7.132 Y-8.486 E275.38317 ; infill
 G1 X16.856 Y8.506 E276.29003 ; infill
 G1 X17.717 Y8.506 E276.32989 ; infill
 G1 X17.717 Y-8.486 E277.11697 ; infill
 G1 X18.274 Y-8.486 E277.14277 ; infill
 G1 X18.339 Y-8.041 E277.16362 ; infill
 M73 P9 ; update progress
 G1 F5760
 G1 X18.274 Y-8.486 E277.03001 ; retract
 G1 F5760
 G1 X17.717 Y-8.486 E276.86462 ; retract
 G1 F5760
 G1 X17.717 Y-3.093 E275.26362 ; retract
 G1 E275.16362 F1800.00000 ; retract
 G1 Z1.100 F7200.000 ; move to next layer (4)
 G1 X-18.786 Y8.786 F7200.000 ; move to first perimeter point
 G1 E277.16362 F1800.00000 ; unretract
 G1 X-18.786 Y-8.786 E277.97757 F657.358 ; perimeter
 G1 X18.786 Y-8.786 E279.71794 ; perimeter
 G1 X18.786 Y8.786 E280.53188 ; perimeter
 G1 X-18.726 Y8.786 E282.26947 ; perimeter
 G1 X-19.343 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y-9.343 E283.13503 F657.358 ; perimeter
 G1 X19.343 Y-9.343 E284.92701 ; perimeter
 G1 X19.343 Y9.343 E285.79256 ; perimeter
 G1 X-19.283 Y9.343 E287.58176 ; perimeter
 G1 X-19.800 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y-9.800 E288.16371 F438.238 ; perimeter
 G1 X19.800 Y-9.800 E289.33949 ; perimeter
 G1 X19.800 Y9.800 E289.92144 ; perimeter
 G1 X-19.740 Y9.800 E291.09543 ; perimeter
 G1 X-19.600 Y9.454 F7200.000 ; move inwards before travel
 G1 X-13.541 Y-8.339 F7200.000 ; move to first infill point
 G1 X-18.486 Y-7.132 E291.33119 F2191.192 ; infill
 G1 X-18.486 Y-6.575 E291.35700 ; infill
 G1 X18.506 Y-6.575 E293.07051 ; infill
 G1 X18.506 Y-5.583 E293.11645 ; infill
 G1 X-18.486 Y4.009 E294.88664 ; infill
 G1 X-18.486 Y4.566 E294.91244 ; infill
 G1 X18.506 Y4.566 E296.62595 ; infill
 M73 P11 ; update progress
 G1 F5760
 G1 X12.106 Y4.566 E294.72595 ; retract
 G1 E294.62595 F1800.00000 ; retract
 G1 Z1.300 F7200.000 ; move to next layer (5)
 G1 X-18.786 Y8.786 F7200.000 ; move to first perimeter point
 G1 E296.62595 F1800.00000 ; unretract
 G1 X-18.786 Y-8.786 E297.43990 F663.012 ; perimeter
 G1 X18.786 Y-8.786 E299.18027 ; perimeter
 G1 X18.786 Y8.786 E299.99421 ; perimeter
 G1 X-18.726 Y8.786 E301.73180 ; perimeter
 G1 X-19.343 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y-9.343 E302.59736 F663.012 ; perimeter
 G1 X19.343 Y-9.343 E304.38934 ; perimeter
 G1 X19.343 Y9.343 E305.25489 ; perimeter
 G1 X-19.283 Y9.343 E307.04409 ; perimeter
 G1 X-19.800 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y-9.800 E307.62604 F442.008 ; perimeter
 G1 X19.800 Y-9.800 E308.80182 ; perimeter
 G1 X19.800 Y9.800 E309.38377 ; perimeter
 G1 X-19.740 Y9.800 E310.55776 ; perimeter
 G1 X-19.600 Y9.454 F7200.000 ; move inwards before travel
 G1 X-15.708 Y8.506 F7200.000 ; move to first infill point
 G1 X-15.708 Y-8.486 E311.34484 F2210.039 ; infill
 G1 X-15.151 Y-8.486 E311.37065 ; infill
 G1 X-5.427 Y8.506 E312.27751 ; infill
 G1 X-4.566 Y8.506 E312.31736 ; infill
 G1 X-4.566 Y-8.486 E313.10444 ; infill
 G1 X-4.009 Y-8.486 E313.13025 ; infill
 G1 X5.715 Y8.506 E314.03711 ; infill
 G1 X6.575 Y8.506 E314.07696 ; infill
 G1 X6.575 Y-8.486 E314.86405 ; infill
 G1 X7.132 Y-8.486 E314.88985 ; infill
 G1 X16.856 Y8.506 E315.79671 ; infill
 G1 X17.717 Y8.506 E315.83656 ; infill
 G1 X17.717 Y-8.486 E316.62365 ; infill
 G1 X18.274 Y-8.486 E316.64945 ; infill
 G1 X18.339 Y-8.041 E316.67030 ; infill
 M73 P13 ; update progress
 G1 F5760
 G1 X18.274 Y-8.486 E316.53668 ; retract
 G1 F5760
 G1 X17.717 Y-8.486 E316.37130 ; retract
 G1 F5760
 G1 X17.717 Y-3.093 E314.77030 ; retract
 G1 E314.67030 F1800.00000 ; retract
 G1 Z1.500 F7200.000 ; move to next layer (6)
 G1 X-18.786 Y8.786 F7200.000 ; move to first perimeter point
 G1 E316.67030 F1800.00000 ; unretract
 G1 X-18.786 Y-8.786 E317.48424 F657.358 ; perimeter
 G1 X18.786 Y-8.786 E319.22461 ; perimeter
 G1 X18.786 Y8.786 E320.03856 ; perimeter
 G1 X-18.726 Y8.786 E321.77615 ; perimeter
 G1 X-19.343 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y-9.343 E322.64170 F657.358 ; perimeter
 G1 X19.343 Y-9.343 E324.43369 ; perimeter
 G1 X19.343 Y9.343 E325.29924 ; perimeter
 G1 X-19.283 Y9.343 E327.08844 ; perimeter
 G1 X-19.800 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y-9.800 E327.67039 F438.238 ; perimeter
 G1 X19.800 Y-9.800 E328.84617 ; perimeter
 G1 X19.800 Y9.800 E329.42811 ; perimeter
 G1 X-19.740 Y9.800 E330.60211 ; perimeter
 G1 X-19.600 Y9.454 F7200.000 ; move inwards before travel
 G1 X-13.541 Y-8.339 F7200.000 ; move to first infill point
 G1 X-18.486 Y-7.132 E330.83787 F2191.192 ; infill
 G1 X-18.486 Y-6.575 E330.86368 ; infill
 G1 X18.506 Y-6.575 E332.57719 ; infill
 G1 X18.506 Y-5.583 E332.62313 ; infill
 G1 X-18.486 Y4.009 E334.39331 ; infill
 G1 X-18.486 Y4.566 E334.41912 ; infill
 G1 X18.506 Y4.566 E336.13263 ; infill
 M73 P15 ; update progress
 G1 F5760
 G1 X12.106 Y4.566 E334.23263 ; retract
 G1 E334.13263 F1800.00000 ; retract
 G1 Z1.700 F7200.000 ; move to next layer (7)
 G1 X-18.786 Y8.786 F7200.000 ; move to first perimeter point
 G1 E336.13263 F1800.00000 ; unretract
 G1 X-18.786 Y-8.786 E336.94657 F663.012 ; perimeter
 G1 X18.786 Y-8.786 E338.68694 ; perimeter
 G1 X18.786 Y8.786 E339.50089 ; perimeter
 G1 X-18.726 Y8.786 E341.23848 ; perimeter
 G1 X-19.343 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y-9.343 E342.10403 F663.012 ; perimeter
 G1 X19.343 Y-9.343 E343.89602 ; perimeter
 G1 X19.343 Y9.343 E344.76157 ; perimeter
 G1 X-19.283 Y9.343 E346.55077 ; perimeter
 G1 X-19.800 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y-9.800 E347.13272 F442.008 ; perimeter
 G1 X19.800 Y-9.800 E348.30849 ; perimeter
 G1 X19.800 Y9.800 E348.89044 ; perimeter
 G1 X-19.740 Y9.800 E350.06444 ; perimeter
 G1 X-19.600 Y9.454 F7200.000 ; move inwards before travel
 G1 X-15.708 Y8.506 F7200.000 ; move to first infill point
 G1 X-15.708 Y-8.486 E350.85152 F2210.039 ; infill
 G1 X-15.151 Y-8.486 E350.87733 ; infill
 G1 X-5.427 Y8.506 E351.78418 ; infill
 G1 X-4.566 Y8.506 E351.82404 ; infill
 G1 X-4.566 Y-8.486 E352.61112 ; infill
 G1 X-4.009 Y-8.486 E352.63693 ; infill
 G1 X5.715 Y8.506 E353.54378 ; infill
 G1 X6.575 Y8.506 E353.58364 ; infill
 G1 X6.575 Y-8.486 E354.37072 ; infill
 G1 X7.132 Y-8.486 E354.39653 ; infill
 G1 X16.856 Y8.506 E355.30338 ; infill
 G1 X17.717 Y8.506 E355.34324 ; infill
 G1 X17.717 Y-8.486 E356.13032 ; infill
 G1 X18.274 Y-8.486 E356.15613 ; infill
 G1 X18.339 Y-8.041 E356.17698 ; infill
 M73 P17 ; update progress
 G1 F5760
 G1 X18.274 Y-8.486 E356.04336 ; retract
 G1 F5760
 G1 X17.717 Y-8.486 E355.87798 ; retract
 G1 F5760
 G1 X17.717 Y-3.093 E354.27698 ; retract
 G1 E354.17698 F1800.00000 ; retract
 G1 Z1.900 F7200.000 ; move to next layer (8)
 G1 X-18.786 Y8.786 F7200.000 ; move to first perimeter point
 G1 E356.17698 F1800.00000 ; unretract
 G1 X-18.786 Y-8.786 E356.99092 F657.358 ; perimeter
 G1 X18.786 Y-8.786 E358.73129 ; perimeter
 G1 X18.786 Y8.786 E359.54524 ; perimeter
 G1 X-18.726 Y8.786 E361.28283 ; perimeter
 G1 X-19.343 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y-9.343 E362.14838 F657.358 ; perimeter
 G1 X19.343 Y-9.343 E363.94036 ; perimeter
 G1 X19.343 Y9.343 E364.80592 ; perimeter
 G1 X-19.283 Y9.343 E366.59512 ; perimeter
 G1 X-19.800 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y-9.800 E367.17707 F438.238 ; perimeter
 G1 X19.800 Y-9.800 E368.35284 ; perimeter
 G1 X19.800 Y9.800 E368.93479 ; perimeter
 G1 X-19.740 Y9.800 E370.10878 ; perimeter
 G1 X-19.600 Y9.454 F7200.000 ; move inwards before travel
 G1 X-13.541 Y-8.339 F7200.000 ; move to first infill point
 G1 X-18.486 Y-7.132 E370.34455 F2191.192 ; infill
 G1 X-18.486 Y-6.575 E370.37035 ; infill
 G1 X18.506 Y-6.575 E372.08386 ; infill
 G1 X18.506 Y-5.583 E372.12980 ; infill
 G1 X-18.486 Y4.009 E373.89999 ; infill
 G1 X-18.486 Y4.566 E373.92580 ; infill
 G1 X18.506 Y4.566 E375.63931 ; infill
 M73 P19 ; update progress
 G1 F5760
 G1 X12.106 Y4.566 E373.73931 ; retract
 G1 E373.63931 F1800.00000 ; retract
 G1 Z2.100 F7200.000 ; move to next layer (9)
 G1 X-18.786 Y8.786 F7200.000 ; move to first perimeter point
 G1 E375.63931 F1800.00000 ; unretract
 G1 X-18.786 Y-8.786 E376.45325 F663.012 ; perimeter
 G1 X18.786 Y-8.786 E378.19362 ; perimeter
 G1 X18.786 Y8.786 E379.00757 ; perimeter
 G1 X-18.726 Y8.786 E380.74516 ; perimeter
 G1 X-19.343 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y-9.343 E381.61071 F663.012 ; perimeter
 G1 X19.343 Y-9.343 E383.40269 ; perimeter
 G1 X19.343 Y9.343 E384.26825 ; perimeter
 G1 X-19.283 Y9.343 E386.05745 ; perimeter
 G1 X-19.800 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y-9.800 E386.63940 F442.008 ; perimeter
 G1 X19.800 Y-9.800 E387.81517 ; perimeter
 G1 X19.800 Y9.800 E388.39712 ; perimeter
 G1 X-19.740 Y9.800 E389.57111 ; perimeter
 G1 X-19.600 Y9.454 F7200.000 ; move inwards before travel
 G1 X-15.708 Y8.506 F7200.000 ; move to first infill point
 G1 X-15.708 Y-8.486 E390.35820 F2210.039 ; infill
 G1 X-15.151 Y-8.486 E390.38400 ; infill
 G1 X-5.427 Y8.506 E391.29086 ; infill
 G1 X-4.566 Y8.506 E391.33072 ; infill
 G1 X-4.566 Y-8.486 E392.11780 ; infill
 G1 X-4.009 Y-8.486 E392.14360 ; infill
 G1 X5.715 Y8.506 E393.05046 ; infill
 G1 X6.575 Y8.506 E393.09032 ; infill
 G1 X6.575 Y-8.486 E393.87740 ; infill
 G1 X7.132 Y-8.486 E393.90320 ; infill
 G1 X16.856 Y8.506 E394.81006 ; infill
 G1 X17.717 Y8.506 E394.84992 ; infill
 G1 X17.717 Y-8.486 E395.63700 ; infill
 G1 X18.274 Y-8.486 E395.66280 ; infill
 G1 X18.339 Y-8.041 E395.68365 ; infill
 M73 P21 ; update progress
 G1 F5760
 G1 X18.274 Y-8.486 E395.55004 ; retract
 G1 F5760
 G1 X17.717 Y-8.486 E395.38465 ; retract
 G1 F5760
 G1 X17.717 Y-3.093 E393.78365 ; retract
 G1 E393.68365 F1800.00000 ; retract
 G1 Z2.300 F7200.000 ; move to next layer (10)
 G1 X-18.786 Y8.786 F7200.000 ; move to first perimeter point
 G1 E395.68365 F1800.00000 ; unretract
 G1 X-18.786 Y-8.786 E396.49760 F657.358 ; perimeter
 G1 X18.786 Y-8.786 E398.23797 ; perimeter
 G1 X18.786 Y8.786 E399.05191 ; perimeter
 G1 X-18.726 Y8.786 E400.78950 ; perimeter
 G1 X-19.343 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y-9.343 E401.65506 F657.358 ; perimeter
 G1 X19.343 Y-9.343 E403.44704 ; perimeter
 G1 X19.343 Y9.343 E404.31259 ; perimeter
 G1 X-19.283 Y9.343 E406.10179 ; perimeter
 G1 X-19.800 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y-9.800 E406.68374 F438.238 ; perimeter
 G1 X19.800 Y-9.800 E407.85952 ; perimeter
 G1 X19.800 Y9.800 E408.44147 ; perimeter
 G1 X-19.740 Y9.800 E409.61546 ; perimeter
 G1 X-19.600 Y9.454 F7200.000 ; move inwards before travel
 G1 X-13.541 Y-8.339 F7200.000 ; move to first infill point
 G1 X-18.486 Y-7.132 E409.85122 F2191.192 ; infill
 G1 X-18.486 Y-6.575 E409.87703 ; infill
 G1 X18.506 Y-6.575 E411.59054 ; infill
 G1 X18.506 Y-5.583 E411.63648 ; infill
 G1 X-18.486 Y4.009 E413.40667 ; infill
 G1 X-18.486 Y4.566 E413.43247 ; infill
 G1 X18.506 Y4.566 E415.14598 ; infill
 M73 P23 ; update progress
 G1 F5760
 G1 X12.106 Y4.566 E413.24598 ; retract
 G1 E413.14598 F1800.00000 ; retract
 G1 Z2.500 F7200.000 ; move to next layer (11)
 G1 X-18.786 Y8.786 F7200.000 ; move to first perimeter point
 G1 E415.14598 F1800.00000 ; unretract
 G1 X-18.786 Y-8.786 E415.95993 F663.012 ; perimeter
 G1 X18.786 Y-8.786 E417.70030 ; perimeter
 G1 X18.786 Y8.786 E418.51424 ; perimeter
 G1 X-18.726 Y8.786 E420.25183 ; perimeter
 G1 X-19.343 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y-9.343 E421.11739 F663.012 ; perimeter
 G1 X19.343 Y-9.343 E422.90937 ; perimeter
 G1 X19.343 Y9.343 E423.77492 ; perimeter
 G1 X-19.283 Y9.343 E425.56412 ; perimeter
 G1 X-19.800 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y-9.800 E426.14607 F442.008 ; perimeter
 G1 X19.800 Y-9.800 E427.32185 ; perimeter
 G1 X19.800 Y9.800 E427.90380 ; perimeter
 G1 X-19.740 Y9.800 E429.07779 ; perimeter
 G1 X-19.600 Y9.454 F7200.000 ; move inwards before travel
 G1 X-15.708 Y8.506 F7200.000 ; move to first infill point
 G1 X-15.708 Y-8.486 E429.86487 F2210.039 ; infill
 G1 X-15.151 Y-8.486 E429.89068 ; infill
 G1 X-5.427 Y8.506 E430.79754 ; infill
 G1 X-4.566 Y8.506 E430.83739 ; infill
 G1 X-4.566 Y-8.486 E431.62447 ; infill
 G1 X-4.009 Y-8.486 E431.65028 ; infill
 G1 X5.715 Y8.506 E432.55714 ; infill
 G1 X6.575 Y8.506 E432.59699 ; infill
 G1 X6.575 Y-8.486 E433.38408 ; infill
 G1 X7.132 Y-8.486 E433.40988 ; infill
 G1 X16.856 Y8.506 E434.31674 ; infill
 G1 X17.717 Y8.506 E434.35659 ; infill
 G1 X17.717 Y-8.486 E435.14368 ; infill
 G1 X18.274 Y-8.486 E435.16948 ; infill
 G1 X18.339 Y-8.041 E435.19033 ; infill
 M73 P25 ; update progress
 G1 F5760
 G1 X18.274 Y-8.486 E435.05671 ; retract
 G1 F5760
 G1 X17.717 Y-8.486 E434.89133 ; retract
 G1 F5760
 G1 X17.717 Y-3.093 E433.29033 ; retract
 G1 E433.19033 F1800.00000 ; retract
 G1 Z2.700 F7200.000 ; move to next layer (12)
 G1 X-18.786 Y8.786 F7200.000 ; move to first perimeter point
 G1 E435.19033 F1800.00000 ; unretract
 G1 X-18.786 Y-8.786 E436.00427 F657.358 ; perimeter
 G1 X18.786 Y-8.786 E437.74464 ; perimeter
 G1 X18.786 Y8.786 E438.55859 ; perimeter
 G1 X-18.726 Y8.786 E440.29618 ; perimeter
 G1 X-19.343 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y-9.343 E441.16173 F657.358 ; perimeter
 G1 X19.343 Y-9.343 E442.95372 ; perimeter
 G1 X19.343 Y9.343 E443.81927 ; perimeter
 G1 X-19.283 Y9.343 E445.60847 ; perimeter
 G1 X-19.800 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y-9.800 E446.19042 F438.238 ; perimeter
 G1 X19.800 Y-9.800 E447.36620 ; perimeter
 G1 X19.800 Y9.800 E447.94814 ; perimeter
 G1 X-19.740 Y9.800 E449.12214 ; perimeter
 G1 X-19.600 Y9.454 F7200.000 ; move inwards before travel
 G1 X-13.541 Y-8.339 F7200.000 ; move to first infill point
 G1 X-18.486 Y-7.132 E449.35790 F2191.192 ; infill
 G1 X-18.486 Y-6.575 E449.38371 ; infill
 G1 X18.506 Y-6.575 E451.09722 ; infill
 G1 X18.506 Y-5.583 E451.14316 ; infill
 G1 X-18.486 Y4.009 E452.91334 ; infill
 G1 X-18.486 Y4.566 E452.93915 ; infill
 G1 X18.506 Y4.566 E454.65266 ; infill
 M73 P27 ; update progress
 G1 F5760
 G1 X12.106 Y4.566 E452.75266 ; retract
 G1 E452.65266 F1800.00000 ; retract
 G1 Z2.900 F7200.000 ; move to next layer (13)
 G1 X-18.786 Y8.786 F7200.000 ; move to first perimeter point
 G1 E454.65266 F1800.00000 ; unretract
 G1 X-18.786 Y-8.786 E455.46660 F663.012 ; perimeter
 G1 X18.786 Y-8.786 E457.20697 ; perimeter
 G1 X18.786 Y8.786 E458.02092 ; perimeter
 G1 X-18.726 Y8.786 E459.75851 ; perimeter
 G1 X-19.343 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y-9.343 E460.62406 F663.012 ; perimeter
 G1 X19.343 Y-9.343 E462.41605 ; perimeter
 G1 X19.343 Y9.343 E463.28160 ; perimeter
 G1 X-19.283 Y9.343 E465.07080 ; perimeter
 G1 X-19.800 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y-9.800 E465.65275 F442.008 ; perimeter
 G1 X19.800 Y-9.800 E466.82852 ; perimeter
 G1 X19.800 Y9.800 E467.41047 ; perimeter
 G1 X-19.740 Y9.800 E468.58447 ; perimeter
 G1 X-19.600 Y9.454 F7200.000 ; move inwards before travel
 G1 X-15.708 Y8.506 F7200.000 ; move to first infill point
 G1 X-15.708 Y-8.486 E469.37155 F2210.039 ; infill
 G1 X-15.151 Y-8.486 E469.39736 ; infill
 G1 X-5.427 Y8.506 E470.30421 ; infill
 G1 X-4.566 Y8.506 E470.34407 ; infill
 G1 X-4.566 Y-8.486 E471.13115 ; infill
 G1 X-4.009 Y-8.486 E471.15696 ; infill
 G1 X5.715 Y8.506 E472.06381 ; infill
 G1 X6.575 Y8.506 E472.10367 ; infill
 G1 X6.575 Y-8.486 E472.89075 ; infill
 G1 X7.132 Y-8.486 E472.91656 ; infill
 G1 X16.856 Y8.506 E473.82341 ; infill
 G1 X17.717 Y8.506 E473.86327 ; infill
 G1 X17.717 Y-8.486 E474.65035 ; infill
 G1 X18.274 Y-8.486 E474.67616 ; infill
 G1 X18.339 Y-8.041 E474.69701 ; infill
 M73 P29 ; update progress
 G1 F5760
 G1 X18.274 Y-8.486 E474.56339 ; retract
 G1 F5760
 G1 X17.717 Y-8.486 E474.39801 ; retract
 G1 F5760
 G1 X17.717 Y-3.093 E472.79701 ; retract
 G1 E472.69701 F1800.00000 ; retract
 G1 Z3.100 F7200.000 ; move to next layer (14)
 G1 X-18.786 Y8.786 F7200.000 ; move to first perimeter point
 G1 E474.69701 F1800.00000 ; unretract
 G1 X-18.786 Y-8.786 E475.51095 F657.358 ; perimeter
 G1 X18.786 Y-8.786 E477.25132 ; perimeter
 G1 X18.786 Y8.786 E478.06527 ; perimeter
 G1 X-18.726 Y8.786 E479.80286 ; perimeter
 G1 X-19.343 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y-9.343 E480.66841 F657.358 ; perimeter
 G1 X19.343 Y-9.343 E482.46039 ; perimeter
 G1 X19.343 Y9.343 E483.32595 ; perimeter
 G1 X-19.283 Y9.343 E485.11515 ; perimeter
 G1 X-19.800 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y-9.800 E485.69710 F438.238 ; perimeter
 G1 X19.800 Y-9.800 E486.87287 ; perimeter
 G1 X19.800 Y9.800 E487.45482 ; perimeter
 G1 X-19.740 Y9.800 E488.62881 ; perimeter
 G1 X-19.600 Y9.454 F7200.000 ; move inwards before travel
 G1 X-13.541 Y-8.339 F7200.000 ; move to first infill point
 G1 X-18.486 Y-7.132 E488.86458 F2191.192 ; infill
 G1 X-18.486 Y-6.575 E488.89038 ; infill
 G1 X18.506 Y-6.575 E490.60389 ; infill
 G1 X18.506 Y-5.583 E490.64983 ; infill
 G1 X-18.486 Y4.009 E492.42002 ; infill
 G1 X-18.486 Y4.566 E492.44583 ; infill
 G1 X18.506 Y4.566 E494.15934 ; infill
 M73 P31 ; update progress
 G1 F5760
 G1 X12.106 Y4.566 E492.25934 ; retract
 G1 E492.15934 F1800.00000 ; retract
 G1 Z3.300 F7200.000 ; move to next layer (15)
 G1 X-18.786 Y8.786 F7200.000 ; move to first perimeter point
 G1 E494.15934 F1800.00000 ; unretract
 G1 X-18.786 Y-8.786 E494.97328 F663.012 ; perimeter
 G1 X18.786 Y-8.786 E496.71365 ; perimeter
 G1 X18.786 Y8.786 E497.52760 ; perimeter
 G1 X-18.726 Y8.786 E499.26519 ; perimeter
 G1 X-19.343 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y-9.343 E500.13074 F663.012 ; perimeter
 G1 X19.343 Y-9.343 E501.92272 ; perimeter
 G1 X19.343 Y9.343 E502.78828 ; perimeter
 G1 X-19.283 Y9.343 E504.57748 ; perimeter
 G1 X-19.800 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y-9.800 E505.15943 F442.008 ; perimeter
 G1 X19.800 Y-9.800 E506.33520 ; perimeter
 G1 X19.800 Y9.800 E506.91715 ; perimeter
 G1 X-19.740 Y9.800 E508.09114 ; perimeter
 G1 X-19.600 Y9.454 F7200.000 ; move inwards before travel
 G1 X-15.708 Y8.506 F7200.000 ; move to first infill point
 G1 X-15.708 Y-8.486 E508.87823 F2210.039 ; infill
 G1 X-15.151 Y-8.486 E508.90403 ; infill
 G1 X-5.427 Y8.506 E509.81089 ; infill
 G1 X-4.566 Y8.506 E509.85075 ; infill
 G1 X-4.566 Y-8.486 E510.63783 ; infill
 G1 X-4.009 Y-8.486 E510.66363 ; infill
 G1 X5.715 Y8.506 E511.57049 ; infill
 G1 X6.575 Y8.506 E511.61035 ; infill
 G1 X6.575 Y-8.486 E512.39743 ; infill
 G1 X7.132 Y-8.486 E512.42323 ; infill
 G1 X16.856 Y8.506 E513.33009 ; infill
 G1 X17.717 Y8.506 E513.36995 ; infill
 G1 X17.717 Y-8.486 E514.15703 ; infill
 G1 X18.274 Y-8.486 E514.18283 ; infill
 G1 X18.339 Y-8.041 E514.20368 ; infill
 M73 P33 ; update progress
 G1 F5760
 G1 X18.274 Y-8.486 E514.07006 ; retract
 G1 F5760
 G1 X17.717 Y-8.486 E513.90468 ; retract
 G1 F5760
 G1 X17.717 Y-3.093 E512.30368 ; retract
 G1 E512.20368 F1800.00000 ; retract
 G1 Z3.500 F7200.000 ; move to next layer (16)
 G1 X-18.786 Y8.786 F7200.000 ; move to first perimeter point
 G1 E514.20368 F1800.00000 ; unretract
 G1 X-18.786 Y-8.786 E515.01763 F657.358 ; perimeter
 G1 X18.786 Y-8.786 E516.75800 ; perimeter
 G1 X18.786 Y8.786 E517.57194 ; perimeter
 G1 X-18.726 Y8.786 E519.30953 ; perimeter
 G1 X-19.343 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y-9.343 E520.17509 F657.358 ; perimeter
 G1 X19.343 Y-9.343 E521.96707 ; perimeter
 G1 X19.343 Y9.343 E522.83262 ; perimeter
 G1 X-19.283 Y9.343 E524.62182 ; perimeter
 G1 X-19.800 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y-9.800 E525.20377 F438.238 ; perimeter
 G1 X19.800 Y-9.800 E526.37955 ; perimeter
 G1 X19.800 Y9.800 E526.96150 ; perimeter
 G1 X-19.740 Y9.800 E528.13549 ; perimeter
 G1 X-19.600 Y9.454 F7200.000 ; move inwards before travel
 G1 X-13.541 Y-8.339 F7200.000 ; move to first infill point
 G1 X-18.486 Y-7.132 E528.37125 F2191.192 ; infill
 G1 X-18.486 Y-6.575 E528.39706 ; infill
 G1 X18.506 Y-6.575 E530.11057 ; infill
 G1 X18.506 Y-5.583 E530.15651 ; infill
 G1 X-18.486 Y4.009 E531.92670 ; infill
 G1 X-18.486 Y4.566 E531.95250 ; infill
 G1 X18.506 Y4.566 E533.66601 ; infill
 M73 P35 ; update progress
 G1 F5760
 G1 X12.106 Y4.566 E531.76601 ; retract
 G1 E531.66601 F1800.00000 ; retract
 G1 Z3.700 F7200.000 ; move to next layer (17)
 G1 X-18.786 Y8.786 F7200.000 ; move to first perimeter point
 G1 E533.66601 F1800.00000 ; unretract
 G1 X-18.786 Y-8.786 E534.47996 F663.012 ; perimeter
 G1 X18.786 Y-8.786 E536.22033 ; perimeter
 G1 X18.786 Y8.786 E537.03427 ; perimeter
 G1 X-18.726 Y8.786 E538.77186 ; perimeter
 G1 X-19.343 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y-9.343 E539.63742 F663.012 ; perimeter
 G1 X19.343 Y-9.343 E541.42940 ; perimeter
 G1 X19.343 Y9.343 E542.29495 ; perimeter
 G1 X-19.283 Y9.343 E544.08415 ; perimeter
 G1 X-19.800 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y-9.800 E544.66610 F442.008 ; perimeter
 G1 X19.800 Y-9.800 E545.84188 ; perimeter
 G1 X19.800 Y9.800 E546.42383 ; perimeter
 G1 X-19.740 Y9.800 E547.59782 ; perimeter
 G1 X-19.600 Y9.454 F7200.000 ; move inwards before travel
 G1 X-15.708 Y8.506 F7200.000 ; move to first infill point
 G1 X-15.708 Y-8.486 E548.38490 F2210.039 ; infill
 G1 X-15.151 Y-8.486 E548.41071 ; infill
 G1 X-5.427 Y8.506 E549.31757 ; infill
 G1 X-4.566 Y8.506 E549.35742 ; infill
 G1 X-4.566 Y-8.486 E550.14450 ; infill
 G1 X-4.009 Y-8.486 E550.17031 ; infill
 G1 X5.715 Y8.506 E551.07717 ; infill
 G1 X6.575 Y8.506 E551.11702 ; infill
 G1 X6.575 Y-8.486 E551.90411 ; infill
 G1 X7.132 Y-8.486 E551.92991 ; infill
 G1 X16.856 Y8.506 E552.83677 ; infill
 G1 X17.717 Y8.506 E552.87662 ; infill
 G1 X17.717 Y-8.486 E553.66371 ; infill
 G1 X18.274 Y-8.486 E553.68951 ; infill
 G1 X18.339 Y-8.041 E553.71036 ; infill
 M73 P37 ; update progress
 G1 F5760
 G1 X18.274 Y-8.486 E553.57674 ; retract
 G1 F5760
 G1 X17.717 Y-8.486 E553.41136 ; retract
 G1 F5760
 G1 X17.717 Y-3.093 E551.81036 ; retract
 G1 E551.71036 F1800.00000 ; retract
 G1 Z3.900 F7200.000 ; move to next layer (18)
 G1 X-18.786 Y8.786 F7200.000 ; move to first perimeter point
 G1 E553.71036 F1800.00000 ; unretract
 G1 X-18.786 Y-8.786 E554.52430 F657.358 ; perimeter
 G1 X18.786 Y-8.786 E556.26467 ; perimeter
 G1 X18.786 Y8.786 E557.07862 ; perimeter
 G1 X-18.726 Y8.786 E558.81621 ; perimeter
 G1 X-19.343 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y-9.343 E559.68176 F657.358 ; perimeter
 G1 X19.343 Y-9.343 E561.47375 ; perimeter
 G1 X19.343 Y9.343 E562.33930 ; perimeter
 G1 X-19.283 Y9.343 E564.12850 ; perimeter
 G1 X-19.800 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y-9.800 E564.71045 F438.238 ; perimeter
 G1 X19.800 Y-9.800 E565.88622 ; perimeter
 G1 X19.800 Y9.800 E566.46817 ; perimeter
 G1 X-19.740 Y9.800 E567.64217 ; perimeter
 G1 X-19.600 Y9.454 F7200.000 ; move inwards before travel
 G1 X-13.541 Y-8.339 F7200.000 ; move to first infill point
 G1 X-18.486 Y-7.132 E567.87793 F2191.192 ; infill
 G1 X-18.486 Y-6.575 E567.90374 ; infill
 G1 X18.506 Y-6.575 E569.61725 ; infill
 G1 X18.506 Y-5.583 E569.66319 ; infill
 G1 X-18.486 Y4.009 E571.43337 ; infill
 G1 X-18.486 Y4.566 E571.45918 ; infill
 G1 X18.506 Y4.566 E573.17269 ; infill
 M73 P39 ; update progress
 G1 F5760
 G1 X12.106 Y4.566 E571.27269 ; retract
 G1 E571.17269 F1800.00000 ; retract
 G1 Z4.100 F7200.000 ; move to next layer (19)
 G1 X-18.786 Y8.786 F7200.000 ; move to first perimeter point
 G1 E573.17269 F1800.00000 ; unretract
 G1 X-18.786 Y-8.786 E573.98663 F663.012 ; perimeter
 G1 X18.786 Y-8.786 E575.72700 ; perimeter
 G1 X18.786 Y8.786 E576.54095 ; perimeter
 G1 X-18.726 Y8.786 E578.27854 ; perimeter
 G1 X-19.343 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y-9.343 E579.14409 F663.012 ; perimeter
 G1 X19.343 Y-9.343 E580.93608 ; perimeter
 G1 X19.343 Y9.343 E581.80163 ; perimeter
 G1 X-19.283 Y9.343 E583.59083 ; perimeter
 G1 X-19.800 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y-9.800 E584.17278 F442.008 ; perimeter
 G1 X19.800 Y-9.800 E585.34855 ; perimeter
 G1 X19.800 Y9.800 E585.93050 ; perimeter
 G1 X-19.740 Y9.800 E587.10450 ; perimeter
 G1 X-19.600 Y9.454 F7200.000 ; move inwards before travel
 G1 X-15.708 Y8.506 F7200.000 ; move to first infill point
 G1 X-15.708 Y-8.486 E587.89158 F2210.039 ; infill
 G1 X-15.151 Y-8.486 E587.91739 ; infill
 G1 X-5.427 Y8.506 E588.82424 ; infill
 G1 X-4.566 Y8.506 E588.86410 ; infill
 G1 X-4.566 Y-8.486 E589.65118 ; infill
 G1 X-4.009 Y-8.486 E589.67699 ; infill
 G1 X5.715 Y8.506 E590.58384 ; infill
 G1 X6.575 Y8.506 E590.62370 ; infill
 G1 X6.575 Y-8.486 E591.41078 ; infill
 G1 X7.132 Y-8.486 E591.43659 ; infill
 G1 X16.856 Y8.506 E592.34344 ; infill
 G1 X17.717 Y8.506 E592.38330 ; infill
 G1 X17.717 Y-8.486 E593.17038 ; infill
 G1 X18.274 Y-8.486 E593.19619 ; infill
 G1 X18.339 Y-8.041 E593.21704 ; infill
 M73 P41 ; update progress
 G1 F5760
 G1 X18.274 Y-8.486 E593.08342 ; retract
 G1 F5760
 G1 X17.717 Y-8.486 E592.91804 ; retract
 G1 F5760
 G1 X17.717 Y-3.093 E591.31704 ; retract
 G1 E591.21704 F1800.00000 ; retract
 G1 Z4.300 F7200.000 ; move to next layer (20)
 G1 X-18.786 Y8.786 F7200.000 ; move to first perimeter point
 G1 E593.21704 F1800.00000 ; unretract
 G1 X-18.786 Y-8.786 E594.03098 F657.358 ; perimeter
 G1 X18.786 Y-8.786 E595.77135 ; perimeter
 G1 X18.786 Y8.786 E596.58530 ; perimeter
 G1 X-18.726 Y8.786 E598.32289 ; perimeter
 G1 X-19.343 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y-9.343 E599.18844 F657.358 ; perimeter
 G1 X19.343 Y-9.343 E600.98042 ; perimeter
 G1 X19.343 Y9.343 E601.84598 ; perimeter
 G1 X-19.283 Y9.343 E603.63518 ; perimeter
 G1 X-19.800 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y-9.800 E604.21713 F438.238 ; perimeter
 G1 X19.800 Y-9.800 E605.39290 ; perimeter
 G1 X19.800 Y9.800 E605.97485 ; perimeter
 G1 X-19.740 Y9.800 E607.14884 ; perimeter
 G1 X-19.600 Y9.454 F7200.000 ; move inwards before travel
 G1 X-13.541 Y-8.339 F7200.000 ; move to first infill point
 G1 X-18.486 Y-7.132 E607.38461 F2191.192 ; infill
 G1 X-18.486 Y-6.575 E607.41041 ; infill
 G1 X18.506 Y-6.575 E609.12392 ; infill
 G1 X18.506 Y-5.583 E609.16986 ; infill
 G1 X-18.486 Y4.009 E610.94005 ; infill
 G1 X-18.486 Y4.566 E610.96585 ; infill
 G1 X18.506 Y4.566 E612.67937 ; infill
 M73 P43 ; update progress
 G1 F5760
 G1 X12.106 Y4.566 E610.77937 ; retract
 G1 E610.67937 F1800.00000 ; retract
 G1 Z4.500 F7200.000 ; move to next layer (21)
 G1 X-18.786 Y8.786 F7200.000 ; move to first perimeter point
 G1 E612.67937 F1800.00000 ; unretract
 G1 X-18.786 Y-8.786 E613.49331 F663.012 ; perimeter
 G1 X18.786 Y-8.786 E615.23368 ; perimeter
 G1 X18.786 Y8.786 E616.04763 ; perimeter
 G1 X-18.726 Y8.786 E617.78522 ; perimeter
 G1 X-19.343 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y-9.343 E618.65077 F663.012 ; perimeter
 G1 X19.343 Y-9.343 E620.44275 ; perimeter
 G1 X19.343 Y9.343 E621.30831 ; perimeter
 G1 X-19.283 Y9.343 E623.09751 ; perimeter
 G1 X-19.800 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y-9.800 E623.67946 F442.008 ; perimeter
 G1 X19.800 Y-9.800 E624.85523 ; perimeter
 G1 X19.800 Y9.800 E625.43718 ; perimeter
 G1 X-19.740 Y9.800 E626.61117 ; perimeter
 G1 X-19.600 Y9.454 F7200.000 ; move inwards before travel
 G1 X-15.708 Y8.506 F7200.000 ; move to first infill point
 G1 X-15.708 Y-8.486 E627.39826 F2210.039 ; infill
 G1 X-15.151 Y-8.486 E627.42406 ; infill
 G1 X-5.427 Y8.506 E628.33092 ; infill
 G1 X-4.566 Y8.506 E628.37077 ; infill
 G1 X-4.566 Y-8.486 E629.15786 ; infill
 G1 X-4.009 Y-8.486 E629.18366 ; infill
 G1 X5.715 Y8.506 E630.09052 ; infill
 G1 X6.575 Y8.506 E630.13038 ; infill
 G1 X6.575 Y-8.486 E630.91746 ; infill
 G1 X7.132 Y-8.486 E630.94326 ; infill
 G1 X16.856 Y8.506 E631.85012 ; infill
 G1 X17.717 Y8.506 E631.88998 ; infill
 G1 X17.717 Y-8.486 E632.67706 ; infill
 G1 X18.274 Y-8.486 E632.70286 ; infill
 G1 X18.339 Y-8.041 E632.72371 ; infill
 M73 P45 ; update progress
 G1 F5760
 G1 X18.274 Y-8.486 E632.59009 ; retract
 G1 F5760
 G1 X17.717 Y-8.486 E632.42471 ; retract
 G1 F5760
 G1 X17.717 Y-3.093 E630.82371 ; retract
 G1 E630.72371 F1800.00000 ; retract
 G1 Z4.700 F7200.000 ; move to next layer (22)
 G1 X-18.786 Y8.786 F7200.000 ; move to first perimeter point
 G1 E632.72371 F1800.00000 ; unretract
 G1 X-18.786 Y-8.786 E633.53766 F1543.844 ; perimeter
 G1 X18.786 Y-8.786 E635.27803 ; perimeter
 G1 X18.786 Y8.786 E636.09197 ; perimeter
 G1 X-18.726 Y8.786 E637.82956 ; perimeter
 G1 X-19.343 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y-9.343 E638.69512 F1543.844 ; perimeter
 G1 X19.343 Y-9.343 E640.48710 ; perimeter
 G1 X19.343 Y9.343 E641.35265 ; perimeter
 G1 X-19.283 Y9.343 E643.14185 ; perimeter
 G1 X-19.800 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y-9.800 E643.72380 F1029.229 ; perimeter
 G1 X19.800 Y-9.800 E644.89958 ; perimeter
 G1 X19.800 Y9.800 E645.48153 ; perimeter
 G1 X-19.740 Y9.800 E646.65552 ; perimeter
 G1 X-19.600 Y9.454 F7200.000 ; move inwards before travel
 G1 X-7.867 Y8.319 F7200.000 ; move to first infill point
 M126 ; enable fan
 G1 X-0.957 Y8.319 E647.03881 F1680.000 ; infill
 G1 X-0.711 Y7.857 E647.06785 ; infill
 G1 X-7.644 Y7.857 E647.45239 ; infill
 G1 X-7.398 Y7.394 E647.48143 ; infill
 G1 X-0.465 Y7.394 E647.86597 ; infill
 G1 X-0.220 Y6.932 E647.89501 ; infill
 G1 X-7.152 Y6.932 E648.27956 ; infill
 G1 X-6.907 Y6.470 E648.30859 ; infill
 G1 X0.026 Y6.470 E648.69314 ; infill
 G1 X0.272 Y6.008 E648.72217 ; infill
 G1 X-6.661 Y6.008 E649.10672 ; infill
 G1 X-6.415 Y5.546 E649.13575 ; infill
 G1 X0.518 Y5.546 E649.52030 ; infill
 G1 X0.763 Y5.084 E649.54933 ; infill
 G1 X-6.169 Y5.084 E649.93388 ; infill
 G1 X-5.924 Y4.622 E649.96291 ; infill
 G1 X1.009 Y4.622 E650.34746 ; infill
 G1 X1.255 Y4.159 E650.37649 ; infill
 G1 X-5.678 Y4.159 E650.76104 ; infill
 G1 X-5.432 Y3.697 E650.79007 ; infill
 G1 X1.501 Y3.697 E651.17462 ; infill
 G1 X1.746 Y3.235 E651.20365 ; infill
 G1 X-5.187 Y3.235 E651.58820 ; infill
 G1 X-4.941 Y2.773 E651.61723 ; infill
 G1 X1.992 Y2.773 E652.00178 ; infill
 G1 X2.238 Y2.311 E652.03082 ; infill
 G1 X-4.695 Y2.311 E652.41536 ; infill
 G1 X-4.449 Y1.849 E652.44440 ; infill
 G1 X2.483 Y1.849 E652.82894 ; infill
 G1 X2.729 Y1.386 E652.85798 ; infill
 G1 X-4.204 Y1.386 E653.24252 ; infill
 G1 X-3.958 Y0.924 E653.27156 ; infill
 G1 X2.975 Y0.924 E653.65611 ; infill
 G1 X3.221 Y0.462 E653.68514 ; infill
 G1 X-3.712 Y0.462 E654.06969 ; infill
 G1 X-3.466 Y-0.000 E654.09872 ; infill
 G1 X3.466 Y-0.000 E654.48327 ; infill
 G1 X3.712 Y-0.462 E654.51230 ; infill
 G1 X-3.221 Y-0.462 E654.89685 ; infill
 G1 X-2.975 Y-0.924 E654.92588 ; infill
 G1 X3.958 Y-0.924 E655.31043 ; infill
 G1 X4.204 Y-1.386 E655.33946 ; infill
 G1 X-2.729 Y-1.386 E655.72401 ; infill
 G1 X-2.483 Y-1.849 E655.75304 ; infill
 G1 X4.449 Y-1.849 E656.13759 ; infill
 G1 X4.695 Y-2.311 E656.16662 ; infill
 G1 X-2.238 Y-2.311 E656.55117 ; infill
 G1 X-1.992 Y-2.773 E656.58020 ; infill
 G1 X4.941 Y-2.773 E656.96475 ; infill
 G1 X5.187 Y-3.235 E656.99378 ; infill
 G1 X-1.746 Y-3.235 E657.37833 ; infill
 G1 X-1.501 Y-3.697 E657.40737 ; infill
 G1 X5.432 Y-3.697 E657.79191 ; infill
 G1 X5.678 Y-4.159 E657.82095 ; infill
 G1 X-1.255 Y-4.159 E658.20549 ; infill
 G1 X-1.009 Y-4.622 E658.23453 ; infill
 G1 X5.924 Y-4.622 E658.61907 ; infill
 G1 X6.169 Y-5.084 E658.64811 ; infill
 G1 X-0.763 Y-5.084 E659.03266 ; infill
 G1 X-0.518 Y-5.546 E659.06169 ; infill
 G1 X6.415 Y-5.546 E659.44624 ; infill
 G1 X6.661 Y-6.008 E659.47527 ; infill
 G1 X-0.272 Y-6.008 E659.85982 ; infill
 G1 X-0.026 Y-6.470 E659.88885 ; infill
 G1 X6.907 Y-6.470 E660.27340 ; infill
 G1 X7.152 Y-6.932 E660.30243 ; infill
 G1 X0.220 Y-6.932 E660.68698 ; infill
 G1 X0.465 Y-7.394 E660.71601 ; infill
 G1 X7.398 Y-7.394 E661.10056 ; infill
 G1 X7.644 Y-7.857 E661.12959 ; infill
 G1 X0.711 Y-7.857 E661.51414 ; infill
 G1 X0.957 Y-8.319 E661.54317 ; infill
 G1 X7.867 Y-8.319 E661.92646 ; infill
 M126 ; enable fan
 G1 X18.506 Y-6.575 F7200.000 ; move to first infill point
 G1 X7.246 Y-6.575 E662.44804 F5146.145 ; infill
 G1 X2.416 Y2.508 E662.92455 ; infill
 G1 X18.506 Y-5.205 E663.75105 ; infill
 G1 X18.506 Y4.566 E664.20366 ; infill
 G1 X1.322 Y4.566 E664.99965 ; infill
 G1 X-6.178 Y4.566 F7200.000 ; move to first infill point
 G1 X-18.486 Y4.566 E665.56977 F5146.145 ; infill
 G1 X-18.486 Y4.009 E665.59558 ; infill
 G1 X-1.862 Y-3.551 E666.44151 ; infill
 G1 X-0.254 Y-6.575 E666.60018 ; infill
 G1 X-18.486 Y-6.575 E667.44472 ; infill
 G1 X-18.486 Y-7.132 E667.47052 ; infill
 G1 X-15.552 Y-8.339 E667.61746 ; infill
 M73 P47 ; update progress
 G1 F5760
 G1 X-18.486 Y-7.132 E666.67570 ; retract
 G1 F5760
 G1 X-18.486 Y-6.575 E666.51032 ; retract
 G1 F5760
 G1 X-15.815 Y-6.575 E665.71747 ; retract
 G1 E665.61746 F1800.00000 ; retract
 G1 Z4.900 F7200.000 ; move to next layer (23)
 G1 X-18.786 Y8.786 F7200.000 ; move to first perimeter point
 G1 E667.61746 F1800.00000 ; unretract
 G1 X-18.786 Y-8.786 E668.43141 F758.255 ; perimeter
 G1 X18.786 Y-8.786 E670.17178 ; perimeter
 G1 X18.786 Y8.786 E670.98573 ; perimeter
 G1 X-18.726 Y8.786 E672.72332 ; perimeter
 G1 X-19.343 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y-9.343 E673.58887 F758.255 ; perimeter
 G1 X19.343 Y-9.343 E675.38085 ; perimeter
 G1 X19.343 Y9.343 E676.24641 ; perimeter
 G1 X-19.283 Y9.343 E678.03561 ; perimeter
 G1 X-19.800 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y-9.800 E678.61756 F505.504 ; perimeter
 G1 X19.800 Y-9.800 E679.79333 ; perimeter
 G1 X19.800 Y9.800 E680.37528 ; perimeter
 G1 X-19.740 Y9.800 E681.54927 ; perimeter
 G1 X-19.600 Y9.454 F7200.000 ; move inwards before travel
 G1 X-15.708 Y8.506 F7200.000 ; move to first infill point
 G1 X-15.708 Y-8.486 E682.33636 F2527.518 ; infill
 G1 X-15.151 Y-8.486 E682.36216 ; infill
 G1 X-6.957 Y5.885 E683.12843 ; infill
 G1 X-4.566 Y1.388 E683.36431 ; infill
 G1 X-4.566 Y-8.486 E683.82169 ; infill
 G1 X-4.009 Y-8.486 E683.84750 ; infill
 G1 X-1.646 Y-4.104 E684.07812 ; infill
 G1 X2.454 Y2.585 F7200.000 ; move to first infill point
 G1 X5.715 Y8.506 E684.39123 F2527.518 ; infill
 G1 X6.575 Y8.506 E684.43109 ; infill
 G1 X6.575 Y-5.166 E685.06441 ; infill
 G1 X7.764 Y-7.403 E685.18174 ; infill
 G1 X16.856 Y8.506 E686.03052 ; infill
 G1 X17.717 Y8.506 E686.07038 ; infill
 G1 X17.717 Y-8.486 E686.85746 ; infill
 G1 X18.274 Y-8.486 E686.88327 ; infill
 G1 X18.339 Y-8.041 E686.90412 ; infill
 G1 X7.732 Y-8.109 F7200.000 ; move to first infill point
 G1 X7.732 Y-8.486 E686.92206 F2527.518 ; infill
 G1 X7.159 Y-8.486 E686.94934 ; infill
 G1 X7.159 Y-7.032 E687.01858 ; infill
 G1 X6.586 Y-5.955 E687.07668 ; infill
 G1 X6.586 Y-8.486 E687.19722 ; infill
 G1 X6.014 Y-8.486 E687.22450 ; infill
 G1 X6.014 Y-4.878 E687.39634 ; infill
 G1 X5.441 Y-3.800 E687.45444 ; infill
 G1 X5.441 Y-8.486 E687.67757 ; infill
 G1 X4.868 Y-8.486 E687.70485 ; infill
 G1 X4.868 Y-2.723 E687.97928 ; infill
 G1 X4.295 Y-1.646 E688.03738 ; infill
 G1 X4.295 Y-8.486 E688.36311 ; infill
 G1 X3.723 Y-8.486 E688.39039 ; infill
 G1 X3.723 Y-0.569 E688.76742 ; infill
 G1 X3.150 Y0.508 E688.82552 ; infill
 G1 X3.150 Y-8.486 E689.25384 ; infill
 G1 X2.577 Y-8.486 E689.28112 ; infill
 G1 X2.577 Y1.585 E689.76074 ; infill
 G1 X2.005 Y2.663 E689.81884 ; infill
 G1 X2.005 Y-8.486 E690.34976 ; infill
 G1 X1.432 Y-8.486 E690.37704 ; infill
 G1 X1.432 Y3.740 E690.95926 ; infill
 G1 X0.859 Y4.817 E691.01736 ; infill
 G1 X0.859 Y-8.048 E691.63003 ; infill
 G1 X0.286 Y-6.971 E691.68813 ; infill
 G1 X0.286 Y5.894 E692.30081 ; infill
 G1 X-0.286 Y6.971 E692.35891 ; infill
 G1 X-0.286 Y-5.894 E692.97158 ; infill
 G1 X-0.859 Y-4.817 E693.02968 ; infill
 G1 X-0.859 Y8.048 E693.64236 ; infill
 G1 X-1.432 Y8.486 E693.67668 ; infill
 G1 X-1.432 Y-3.740 E694.25890 ; infill
 G1 X-2.005 Y-2.662 E694.31700 ; infill
 G1 X-2.005 Y8.486 E694.84792 ; infill
 G1 X-2.577 Y8.486 E694.87519 ; infill
 G1 X-2.577 Y-1.585 E695.35482 ; infill
 G1 X-3.150 Y-0.508 E695.41291 ; infill
 G1 X-3.150 Y8.486 E695.84124 ; infill
 G1 X-3.723 Y8.486 E695.86851 ; infill
 G1 X-3.723 Y0.569 E696.24554 ; infill
 G1 X-4.296 Y1.646 E696.30364 ; infill
 G1 X-4.296 Y8.486 E696.62937 ; infill
 G1 X-4.868 Y8.486 E696.65665 ; infill
 G1 X-4.868 Y2.723 E696.93108 ; infill
 G1 X-5.441 Y3.800 E696.98918 ; infill
 G1 X-5.441 Y8.486 E697.21231 ; infill
 G1 X-6.014 Y8.486 E697.23959 ; infill
 G1 X-6.014 Y4.878 E697.41143 ; infill
 G1 X-6.586 Y5.955 E697.46952 ; infill
 G1 X-6.586 Y8.486 E697.59006 ; infill
 G1 X-7.159 Y8.486 E697.61734 ; infill
 G1 X-7.159 Y7.032 E697.68658 ; infill
 G1 X-7.732 Y8.109 E697.74468 ; infill
 G1 X-7.732 Y8.486 E697.76262 ; infill
 M73 P49 ; update progress
 G1 F5760
 G1 X-7.732 Y8.109 E697.65076 ; retract
 G1 F5760
 G1 X-7.159 Y7.032 E697.28858 ; retract
 G1 F5760
 G1 X-7.159 Y8.486 E696.85694 ; retract
 G1 F5760
 G1 X-6.586 Y8.486 E696.68691 ; retract
 G1 F5760
 G1 X-6.586 Y5.955 E695.93548 ; retract
 G1 F5760
 G1 X-6.471 Y5.738 E695.86262 ; retract
 G1 E695.76262 F1800.00000 ; retract
 G1 Z5.100 F7200.000 ; move to next layer (24)
 G1 X-18.786 Y8.786 F7200.000 ; move to first perimeter point
 G1 E697.76262 F1800.00000 ; unretract
 G1 X-18.786 Y-8.786 E698.57657 F1171.947 ; perimeter
 G1 X18.786 Y-8.786 E700.31694 ; perimeter
 G1 X18.786 Y8.786 E701.13088 ; perimeter
 G1 X-18.726 Y8.786 E702.86848 ; perimeter
 G1 X-19.343 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y-9.343 E703.73403 F1171.947 ; perimeter
 G1 X19.343 Y-9.343 E705.52601 ; perimeter
 G1 X19.343 Y9.343 E706.39156 ; perimeter
 G1 X-19.283 Y9.343 E708.18077 ; perimeter
 G1 X-19.800 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y-9.800 E708.76272 F781.298 ; perimeter
 G1 X19.800 Y-9.800 E709.93849 ; perimeter
 G1 X19.800 Y9.800 E710.52044 ; perimeter
 G1 X-19.740 Y9.800 E711.69443 ; perimeter
 G1 X-19.600 Y9.454 F7200.000 ; move inwards before travel
 G1 X-7.839 Y8.319 F7200.000 ; move to first infill point
 G1 X-0.985 Y8.319 E711.90058 F1171.947 ; infill
 G1 X-0.792 Y7.957 E711.91290 ; infill
 G1 X-7.669 Y7.957 E712.11972 ; infill
 G1 X-7.477 Y7.595 E712.13204 ; infill
 G1 X-0.600 Y7.595 E712.33886 ; infill
 G1 X-0.408 Y7.234 E712.35118 ; infill
 G1 X-7.285 Y7.234 E712.55801 ; infill
 G1 X-7.092 Y6.872 E712.57032 ; infill
 G1 X-0.215 Y6.872 E712.77715 ; infill
 G1 X-0.023 Y6.510 E712.78947 ; infill
 G1 X-6.900 Y6.510 E712.99629 ; infill
 G1 X-6.708 Y6.149 E713.00861 ; infill
 G1 X0.169 Y6.149 E713.21543 ; infill
 G1 X0.362 Y5.787 E713.22775 ; infill
 G1 X-6.516 Y5.787 E713.43458 ; infill
 G1 X-6.323 Y5.425 E713.44690 ; infill
 G1 X0.554 Y5.425 E713.65372 ; infill
 G1 X0.746 Y5.064 E713.66604 ; infill
 G1 X-6.131 Y5.064 E713.87286 ; infill
 G1 X-5.939 Y4.702 E713.88518 ; infill
 G1 X0.938 Y4.702 E714.09201 ; infill
 G1 X1.131 Y4.340 E714.10433 ; infill
 G1 X-5.746 Y4.340 E714.31115 ; infill
 G1 X-5.554 Y3.979 E714.32347 ; infill
 G1 X1.323 Y3.979 E714.53029 ; infill
 G1 X1.515 Y3.617 E714.54261 ; infill
 G1 X-5.362 Y3.617 E714.74944 ; infill
 G1 X-5.169 Y3.255 E714.76176 ; infill
 G1 X1.708 Y3.255 E714.96858 ; infill
 G1 X1.900 Y2.894 E714.98090 ; infill
 G1 X-4.977 Y2.894 E715.18772 ; infill
 G1 X-4.785 Y2.532 E715.20004 ; infill
 G1 X2.092 Y2.532 E715.40687 ; infill
 G1 X2.285 Y2.170 E715.41919 ; infill
 G1 X-4.592 Y2.170 E715.62601 ; infill
 G1 X-4.400 Y1.808 E715.63833 ; infill
 G1 X2.477 Y1.808 E715.84515 ; infill
 G1 X2.669 Y1.447 E715.85747 ; infill
 G1 X-4.208 Y1.447 E716.06429 ; infill
 G1 X-4.015 Y1.085 E716.07661 ; infill
 G1 X2.862 Y1.085 E716.28344 ; infill
 G1 X3.054 Y0.723 E716.29576 ; infill
 G1 X-3.823 Y0.723 E716.50258 ; infill
 G1 X-3.631 Y0.362 E716.51490 ; infill
 G1 X3.246 Y0.362 E716.72172 ; infill
 G1 X3.439 Y0.000 E716.73404 ; infill
 G1 X-3.439 Y0.000 E716.94087 ; infill
 G1 X-3.246 Y-0.362 E716.95319 ; infill
 G1 X3.631 Y-0.362 E717.16001 ; infill
 G1 X3.823 Y-0.723 E717.17233 ; infill
 G1 X-3.054 Y-0.723 E717.37915 ; infill
 G1 X-2.862 Y-1.085 E717.39147 ; infill
 G1 X4.015 Y-1.085 E717.59830 ; infill
 G1 X4.208 Y-1.447 E717.61062 ; infill
 G1 X-2.669 Y-1.447 E717.81744 ; infill
 G1 X-2.477 Y-1.808 E717.82976 ; infill
 G1 X4.400 Y-1.808 E718.03658 ; infill
 G1 X4.592 Y-2.170 E718.04890 ; infill
 G1 X-2.285 Y-2.170 E718.25573 ; infill
 G1 X-2.092 Y-2.532 E718.26805 ; infill
 G1 X4.785 Y-2.532 E718.47487 ; infill
 G1 X4.977 Y-2.893 E718.48719 ; infill
 G1 X-1.900 Y-2.893 E718.69401 ; infill
 G1 X-1.708 Y-3.255 E718.70633 ; infill
 G1 X5.169 Y-3.255 E718.91315 ; infill
 G1 X5.362 Y-3.617 E718.92547 ; infill
 G1 X-1.515 Y-3.617 E719.13230 ; infill
 G1 X-1.323 Y-3.979 E719.14462 ; infill
 G1 X5.554 Y-3.979 E719.35144 ; infill
 G1 X5.746 Y-4.340 E719.36376 ; infill
 G1 X-1.131 Y-4.340 E719.57058 ; infill
 G1 X-0.938 Y-4.702 E719.58290 ; infill
 G1 X5.939 Y-4.702 E719.78973 ; infill
 G1 X6.131 Y-5.064 E719.80205 ; infill
 G1 X-0.746 Y-5.064 E720.00887 ; infill
 G1 X-0.554 Y-5.425 E720.02119 ; infill
 G1 X6.323 Y-5.425 E720.22801 ; infill
 G1 X6.516 Y-5.787 E720.24033 ; infill
 G1 X-0.362 Y-5.787 E720.44716 ; infill
 G1 X-0.169 Y-6.149 E720.45948 ; infill
 G1 X6.708 Y-6.149 E720.66630 ; infill
 G1 X6.900 Y-6.510 E720.67862 ; infill
 G1 X0.023 Y-6.510 E720.88544 ; infill
 G1 X0.215 Y-6.872 E720.89776 ; infill
 G1 X7.092 Y-6.872 E721.10459 ; infill
 G1 X7.285 Y-7.234 E721.11690 ; infill
 G1 X0.408 Y-7.234 E721.32373 ; infill
 G1 X0.600 Y-7.595 E721.33605 ; infill
 G1 X7.477 Y-7.595 E721.54287 ; infill
 G1 X7.669 Y-7.957 E721.55519 ; infill
 G1 X0.792 Y-7.957 E721.76201 ; infill
 G1 X0.985 Y-8.319 E721.77433 ; infill
 G1 X7.839 Y-8.319 E721.98048 ; infill
 G1 X18.506 Y-6.575 F7200.000 ; move to first infill point
 G1 X7.246 Y-6.575 E722.50205 F3906.489 ; infill
 G1 X2.416 Y2.508 E722.97857 ; infill
 G1 X18.506 Y-5.205 E723.80506 ; infill
 G1 X18.506 Y4.566 E724.25768 ; infill
 G1 X1.322 Y4.566 E725.05366 ; infill
 G1 F5760
 G1 X7.722 Y4.566 E723.15366 ; retract
 G1 E723.05366 F1800.00000 ; retract
 G1 X-6.178 Y4.566 F7200.000 ; move to first infill point
 G1 E725.05366 F1800.00000 ; unretract
 G1 X-18.486 Y4.566 E725.62378 F3906.489 ; infill
 G1 X-18.486 Y4.009 E725.64959 ; infill
 G1 X-1.862 Y-3.551 E726.49551 ; infill
 G1 X-0.254 Y-6.575 E726.65419 ; infill
 G1 X-18.486 Y-6.575 E727.49872 ; infill
 G1 X-18.486 Y-7.132 E727.52453 ; infill
 G1 X-15.552 Y-8.339 E727.67147 ; infill
 M73 P50 ; update progress
 G1 F5760
 G1 X-18.486 Y-7.132 E726.72971 ; retract
 G1 F5760
 G1 X-18.486 Y-6.575 E726.56433 ; retract
 G1 F5760
 G1 X-15.815 Y-6.575 E725.77147 ; retract
 G1 E725.67147 F1800.00000 ; retract
 G1 Z5.300 F7200.000 ; move to next layer (25)
 G1 X-3.070 Y8.786 F7200.000 ; move to first perimeter point
 G1 E727.67147 F1800.00000 ; unretract
 G1 X6.273 Y-8.786 E728.59332 F863.187 ; perimeter
 G1 X18.786 Y-8.786 E729.17293 ; perimeter
 G1 X18.786 Y8.786 E729.98687 ; perimeter
 G1 X-3.010 Y8.786 E730.99648 ; perimeter
 G1 X-3.997 Y9.343 F7200.000 ; move to first perimeter point
 G1 X5.938 Y-9.343 E731.97678 F863.187 ; perimeter
 G1 X19.343 Y-9.343 E732.59769 ; perimeter
 G1 X19.343 Y9.343 E733.46325 ; perimeter
 G1 X-3.937 Y9.343 E734.54160 ; perimeter
 G1 X-4.758 Y9.800 F7200.000 ; move to first perimeter point
 G1 X5.664 Y-9.800 E735.20070 F575.458 ; perimeter
 G1 X19.800 Y-9.800 E735.62042 ; perimeter
 G1 X19.800 Y9.800 E736.20237 ; perimeter
 G1 X-4.698 Y9.800 E736.92974 ; perimeter
 G1 X-4.457 Y9.536 F7200.000 ; move inwards before travel
 G1 X1.507 Y0.963 F7200.000 ; move to first infill point
 G1 X5.715 Y8.506 E737.32982 F2877.292 ; infill
 G1 X6.575 Y8.506 E737.36967 ; infill
 G1 X6.575 Y-8.486 E738.15676 ; infill
 G1 X7.132 Y-8.486 E738.18256 ; infill
 G1 X16.856 Y8.506 E739.08942 ; infill
 G1 X17.717 Y8.506 E739.12927 ; infill
 G1 X17.717 Y-8.486 E739.91636 ; infill
 G1 X18.274 Y-8.486 E739.94216 ; infill
 G1 X18.339 Y-8.041 E739.96301 ; infill
 G1 F5760
 G1 X18.274 Y-8.486 E739.82939 ; retract
 G1 F5760
 G1 X17.717 Y-8.486 E739.66401 ; retract
 G1 F5760
 G1 X17.717 Y-3.093 E738.06301 ; retract
 G1 E737.96301 F1800.00000 ; retract
 G1 X-6.190 Y8.630 F7200.000 ; move to first perimeter point
 G1 E739.96301 F1800.00000 ; unretract
 G1 X-6.273 Y8.786 E739.97119 F863.187 ; perimeter
 G1 X-18.786 Y8.786 E740.55079 ; perimeter
 G1 X-18.786 Y-8.786 E741.36473 ; perimeter
 G1 X3.070 Y-8.786 E742.37712 ; perimeter
 G1 X-6.162 Y8.577 E743.28801 ; perimeter
 G1 X-5.938 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y9.343 E743.90893 F863.187 ; perimeter
 G1 X-19.343 Y-9.343 E744.77448 ; perimeter
 G1 X3.997 Y-9.343 E745.85562 ; perimeter
 G1 X-5.910 Y9.290 E746.83314 ; perimeter
 G1 X-5.664 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y9.800 E747.25286 F575.458 ; perimeter
 G1 X-19.800 Y-9.800 E747.83481 ; perimeter
 G1 X4.758 Y-9.800 E748.56396 ; perimeter
 G1 X-5.636 Y9.747 E749.22128 ; perimeter
 G1 X-5.973 Y9.546 F7200.000 ; move inwards before travel
 G1 X1.956 Y-7.476 F7200.000 ; move to first infill point
 G1 X1.562 Y-8.486 E749.27150 F2877.292 ; infill
 G1 X1.004 Y-8.486 E749.29731 ; infill
 G1 X1.004 Y-5.686 E749.42698 ; infill
 G1 X-3.355 Y2.512 E749.85710 ; infill
 G1 X-9.580 Y-8.486 E750.44250 ; infill
 G1 X-10.137 Y-8.486 E750.46830 ; infill
 G1 X-10.137 Y8.506 E751.25539 ; infill
 G1 X-10.998 Y8.506 E751.29524 ; infill
 G1 X-18.339 Y-4.404 E751.98317 ; infill
 M73 P52 ; update progress
 G1 F5760
 G1 X-15.175 Y1.159 E750.08317 ; retract
 G1 E749.98317 F1800.00000 ; retract
 G1 Z5.500 F7200.000 ; move to next layer (26)
 G1 X-2.843 Y8.786 F7200.000 ; move to first perimeter point
 G1 E751.98317 F1800.00000 ; unretract
 G1 X6.500 Y-8.786 E752.90502 F861.627 ; perimeter
 G1 X18.786 Y-8.786 E753.47413 ; perimeter
 G1 X18.786 Y8.786 E754.28807 ; perimeter
 G1 X-2.783 Y8.786 E755.28719 ; perimeter
 G1 X-3.771 Y9.343 F7200.000 ; move to first perimeter point
 G1 X6.165 Y-9.343 E756.26749 F861.627 ; perimeter
 G1 X19.343 Y-9.343 E756.87791 ; perimeter
 G1 X19.343 Y9.343 E757.74346 ; perimeter
 G1 X-3.710 Y9.343 E758.81133 ; perimeter
 G1 X-4.531 Y9.800 F7200.000 ; move to first perimeter point
 G1 X5.890 Y-9.800 E759.47043 F574.418 ; perimeter
 G1 X19.800 Y-9.800 E759.88343 ; perimeter
 G1 X19.800 Y9.800 E760.46537 ; perimeter
 G1 X-4.471 Y9.800 E761.18602 ; perimeter
 G1 X-4.231 Y9.536 F7200.000 ; move inwards before travel
 G1 X-0.261 Y4.566 F7200.000 ; move to first infill point
 G1 X18.506 Y4.566 E762.05531 F2872.088 ; infill
 G1 X18.506 Y-5.263 E762.51063 ; infill
 G1 X0.758 Y2.650 E763.41073 ; infill
 G1 X5.663 Y-6.575 E763.89470 ; infill
 G1 X18.506 Y-6.575 E764.48958 ; infill
 G1 F5760
 G1 X12.106 Y-6.575 E762.58958 ; retract
 G1 E762.48958 F1800.00000 ; retract
 G1 X-6.500 Y8.786 F7200.000 ; move to first perimeter point
 G1 E764.48958 F1800.00000 ; unretract
 G1 X-18.786 Y8.786 E765.05869 F861.627 ; perimeter
 G1 X-18.786 Y-8.786 E765.87263 ; perimeter
 G1 X2.843 Y-8.786 E766.87453 ; perimeter
 G1 X-6.471 Y8.733 E767.79360 ; perimeter
 G1 X-6.165 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y9.343 E768.40402 F861.627 ; perimeter
 G1 X-19.343 Y-9.343 E769.26957 ; perimeter
 G1 X3.770 Y-9.343 E770.34022 ; perimeter
 G1 X-6.137 Y9.290 E771.31774 ; perimeter
 G1 X-5.890 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y9.800 E771.73074 F574.418 ; perimeter
 G1 X-19.800 Y-9.800 E772.31269 ; perimeter
 G1 X4.531 Y-9.800 E773.03511 ; perimeter
 G1 X-5.862 Y9.747 E773.69243 ; perimeter
 G1 X-6.200 Y9.546 F7200.000 ; move inwards before travel
 G1 X-4.595 Y4.566 F7200.000 ; move to first infill point
 G1 X-18.486 Y4.566 E774.33586 F2872.088 ; infill
 G1 X-18.486 Y4.009 E774.36166 ; infill
 G1 X0.239 Y-4.526 E775.31488 ; infill
 G1 X1.329 Y-6.575 E775.42240 ; infill
 G1 X-18.486 Y-6.575 E776.34024 ; infill
 G1 X-18.486 Y-7.132 E776.36604 ; infill
 G1 X-15.552 Y-8.339 E776.51299 ; infill
 M73 P54 ; update progress
 G1 F5760
 G1 X-18.486 Y-7.132 E775.57123 ; retract
 G1 F5760
 G1 X-18.486 Y-6.575 E775.40584 ; retract
 G1 F5760
 G1 X-15.815 Y-6.575 E774.61299 ; retract
 G1 E774.51299 F1800.00000 ; retract
 G1 Z5.700 F7200.000 ; move to next layer (27)
 G1 X-2.617 Y8.786 F7200.000 ; move to first perimeter point
 G1 E776.51299 F1800.00000 ; unretract
 G1 X6.726 Y-8.786 E777.43484 F880.799 ; perimeter
 G1 X18.786 Y-8.786 E777.99346 ; perimeter
 G1 X18.786 Y8.786 E778.80740 ; perimeter
 G1 X-2.557 Y8.786 E779.79602 ; perimeter
 G1 X-3.544 Y9.343 F7200.000 ; move to first perimeter point
 G1 X6.391 Y-9.343 E780.77632 F880.799 ; perimeter
 G1 X19.343 Y-9.343 E781.37625 ; perimeter
 G1 X19.343 Y9.343 E782.24181 ; perimeter
 G1 X-3.484 Y9.343 E783.29918 ; perimeter
 G1 X-4.305 Y9.800 F7200.000 ; move to first perimeter point
 G1 X6.117 Y-9.800 E783.95828 F587.199 ; perimeter
 G1 X19.800 Y-9.800 E784.36455 ; perimeter
 G1 X19.800 Y9.800 E784.94650 ; perimeter
 G1 X-4.245 Y9.800 E785.66042 ; perimeter
 G1 X-4.004 Y9.536 F7200.000 ; move inwards before travel
 G1 X1.744 Y1.370 F7200.000 ; move to first infill point
 G1 X5.715 Y8.506 E786.03871 F2935.996 ; infill
 G1 X6.575 Y8.506 E786.07857 ; infill
 G1 X6.575 Y-7.717 E786.83003 ; infill
 G1 X7.132 Y-8.486 E786.87402 ; infill
 G1 X16.856 Y8.506 E787.78087 ; infill
 G1 X17.717 Y8.506 E787.82073 ; infill
 G1 X17.717 Y-8.486 E788.60781 ; infill
 G1 X18.274 Y-8.486 E788.63362 ; infill
 G1 X18.339 Y-8.041 E788.65446 ; infill
 G1 F5760
 G1 X18.274 Y-8.486 E788.52085 ; retract
 G1 F5760
 G1 X17.717 Y-8.486 E788.35546 ; retract
 G1 F5760
 G1 X17.717 Y-3.093 E786.75446 ; retract
 G1 E786.65446 F1800.00000 ; retract
 G1 X-6.726 Y8.786 F7200.000 ; move to first perimeter point
 G1 E788.65446 F1800.00000 ; unretract
 G1 X-18.786 Y8.786 E789.21308 F880.799 ; perimeter
 G1 X-18.786 Y-8.786 E790.02703 ; perimeter
 G1 X2.617 Y-8.786 E791.01843 ; perimeter
 G1 X-6.698 Y8.733 E791.93750 ; perimeter
 G1 X-6.391 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y9.343 E792.53743 F880.799 ; perimeter
 G1 X-19.343 Y-9.343 E793.40298 ; perimeter
 G1 X3.544 Y-9.343 E794.46314 ; perimeter
 G1 X-6.363 Y9.290 E795.44066 ; perimeter
 G1 X-19.800 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y-9.800 E796.02261 F587.199 ; perimeter
 G1 X4.305 Y-9.800 E796.73831 ; perimeter
 G1 X-4.897 Y7.506 E797.32027 ; perimeter
 G1 X-19.800 Y9.800 E797.76796 ; perimeter
 G1 X-6.177 Y9.800 E798.17245 ; perimeter
 G1 X-19.454 Y9.600 F7200.000 ; move inwards before travel
 G1 X-18.339 Y-4.404 F7200.000 ; move to first infill point
 G1 X-10.998 Y8.506 E798.86038 F2935.996 ; infill
 G1 X-10.137 Y8.506 E798.90023 ; infill
 G1 X-10.137 Y-8.486 E799.68732 ; infill
 G1 X-9.580 Y-8.486 E799.71312 ; infill
 G1 X-3.592 Y2.106 E800.27674 ; infill
 G1 X1.004 Y-6.538 E800.73025 ; infill
 G1 X1.004 Y-8.486 E800.82046 ; infill
 G1 X1.562 Y-8.486 E800.84626 ; infill
 G1 X1.719 Y-7.882 E800.87516 ; infill
 M73 P56 ; update progress
 G1 F5760
 G1 X1.562 Y-8.486 E800.68993 ; retract
 G1 F5760
 G1 X1.004 Y-8.486 E800.52455 ; retract
 G1 F5760
 G1 X1.004 Y-6.538 E799.94641 ; retract
 G1 F5760
 G1 X-0.531 Y-3.650 E798.97516 ; retract
 G1 E798.87516 F1800.00000 ; retract
 G1 Z5.900 F7200.000 ; move to next layer (28)
 G1 X-2.390 Y8.786 F7200.000 ; move to first perimeter point
 G1 E800.87516 F1800.00000 ; unretract
 G1 X6.953 Y-8.786 E801.79701 F850.911 ; perimeter
 G1 X18.786 Y-8.786 E802.34514 ; perimeter
 G1 X18.786 Y8.786 E803.15909 ; perimeter
 G1 X-2.330 Y8.786 E804.13722 ; perimeter
 G1 X-3.317 Y9.343 F7200.000 ; move to first perimeter point
 G1 X6.618 Y-9.343 E805.11752 F850.911 ; perimeter
 G1 X19.343 Y-9.343 E805.70695 ; perimeter
 G1 X19.343 Y9.343 E806.57251 ; perimeter
 G1 X-3.257 Y9.343 E807.61939 ; perimeter
 G1 X-4.078 Y9.800 F7200.000 ; move to first perimeter point
 G1 X6.343 Y-9.800 E808.27849 F567.274 ; perimeter
 G1 X19.800 Y-9.800 E808.67803 ; perimeter
 G1 X19.800 Y9.800 E809.25998 ; perimeter
 G1 X-4.018 Y9.800 E809.96717 ; perimeter
 G1 X-3.778 Y9.536 F7200.000 ; move inwards before travel
 G1 X0.192 Y4.566 F7200.000 ; move to first infill point
 G1 X18.506 Y4.566 E810.81548 F2836.370 ; infill
 G1 X18.506 Y-5.247 E811.27007 ; infill
 G1 X1.232 Y2.612 E812.14917 ; infill
 G1 X6.116 Y-6.575 E812.63115 ; infill
 G1 X18.506 Y-6.575 E813.20504 ; infill
 G1 F5760
 G1 X12.106 Y-6.575 E811.30504 ; retract
 G1 E811.20504 F1800.00000 ; retract
 G1 X-6.953 Y8.786 F7200.000 ; move to first perimeter point
 G1 E813.20504 F1800.00000 ; unretract
 G1 X-18.786 Y8.786 E813.75317 F850.911 ; perimeter
 G1 X-18.786 Y-8.786 E814.56711 ; perimeter
 G1 X2.390 Y-8.786 E815.54802 ; perimeter
 G1 X-6.925 Y8.733 E816.46709 ; perimeter
 G1 X-6.618 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y9.343 E817.05653 F850.911 ; perimeter
 G1 X-19.343 Y-9.343 E817.92208 ; perimeter
 G1 X3.317 Y-9.343 E818.97174 ; perimeter
 G1 X-6.590 Y9.290 E819.94926 ; perimeter
 G1 X-6.343 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y9.800 E820.34881 F567.274 ; perimeter
 G1 X-19.800 Y-9.800 E820.93076 ; perimeter
 G1 X4.078 Y-9.800 E821.63973 ; perimeter
 G1 X-6.315 Y9.747 E822.29705 ; perimeter
 G1 X-6.653 Y9.546 F7200.000 ; move inwards before travel
 G1 X-5.048 Y4.566 F7200.000 ; move to first infill point
 G1 X-18.486 Y4.566 E822.91950 F2836.370 ; infill
 G1 X-18.486 Y4.009 E822.94530 ; infill
 G1 X-0.362 Y-4.247 E823.86780 ; infill
 G1 X0.876 Y-6.575 E823.98997 ; infill
 G1 X-18.486 Y-6.575 E824.88683 ; infill
 G1 X-18.486 Y-7.132 E824.91263 ; infill
 G1 X-15.552 Y-8.339 E825.05957 ; infill
 M73 P58 ; update progress
 G1 F5760
 G1 X-18.486 Y-7.132 E824.11781 ; retract
 G1 F5760
 G1 X-18.486 Y-6.575 E823.95243 ; retract
 G1 F5760
 G1 X-15.815 Y-6.575 E823.15957 ; retract
 G1 E823.05957 F1800.00000 ; retract
 G1 Z6.100 F7200.000 ; move to next layer (29)
 G1 X-2.164 Y8.786 F7200.000 ; move to first perimeter point
 G1 E825.05957 F1800.00000 ; unretract
 G1 X7.179 Y-8.786 E825.98142 F849.618 ; perimeter
 G1 X18.786 Y-8.786 E826.51906 ; perimeter
 G1 X18.786 Y8.786 E827.33300 ; perimeter
 G1 X-2.104 Y8.786 E828.30064 ; perimeter
 G1 X-3.091 Y9.343 F7200.000 ; move to first perimeter point
 G1 X6.844 Y-9.343 E829.28094 F849.618 ; perimeter
 G1 X19.343 Y-9.343 E829.85988 ; perimeter
 G1 X19.343 Y9.343 E830.72544 ; perimeter
 G1 X-3.031 Y9.343 E831.76183 ; perimeter
 G1 X-3.852 Y9.800 F7200.000 ; move to first perimeter point
 G1 X6.570 Y-9.800 E832.42092 F566.412 ; perimeter
 G1 X19.800 Y-9.800 E832.81375 ; perimeter
 G1 X19.800 Y9.800 E833.39569 ; perimeter
 G1 X-3.792 Y9.800 E834.09616 ; perimeter
 G1 X-3.551 Y9.536 F7200.000 ; move inwards before travel
 G1 X1.981 Y1.776 F7200.000 ; move to first infill point
 G1 X5.715 Y8.506 E834.45268 F2832.060 ; infill
 G1 X6.575 Y8.506 E834.49253 ; infill
 G1 X6.575 Y-6.865 E835.20452 ; infill
 G1 X7.292 Y-8.213 E835.27523 ; infill
 G1 X16.856 Y8.506 E836.16743 ; infill
 G1 X17.717 Y8.506 E836.20729 ; infill
 G1 X17.717 Y-8.486 E836.99437 ; infill
 G1 X18.274 Y-8.486 E837.02017 ; infill
 G1 X18.339 Y-8.041 E837.04102 ; infill
 G1 F5760
 G1 X18.274 Y-8.486 E836.90740 ; retract
 G1 F5760
 G1 X17.717 Y-8.486 E836.74202 ; retract
 G1 F5760
 G1 X17.717 Y-3.093 E835.14102 ; retract
 G1 E835.04102 F1800.00000 ; retract
 G1 X-7.179 Y8.786 F7200.000 ; move to first perimeter point
 G1 E837.04102 F1800.00000 ; unretract
 G1 X-18.786 Y8.786 E837.57866 F849.618 ; perimeter
 G1 X-18.786 Y-8.786 E838.39260 ; perimeter
 G1 X2.164 Y-8.786 E839.36302 ; perimeter
 G1 X-7.151 Y8.733 E840.28209 ; perimeter
 G1 X-6.844 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y9.343 E840.86103 F849.618 ; perimeter
 G1 X-19.343 Y-9.343 E841.72659 ; perimeter
 G1 X3.091 Y-9.343 E842.76575 ; perimeter
 G1 X-6.816 Y9.290 E843.74328 ; perimeter
 G1 X-6.570 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y9.800 E844.13610 F566.412 ; perimeter
 G1 X-19.800 Y-9.800 E844.71805 ; perimeter
 G1 X3.852 Y-9.800 E845.42029 ; perimeter
 G1 X-6.542 Y9.747 E846.07761 ; perimeter
 G1 X-6.879 Y9.546 F7200.000 ; move inwards before travel
 G1 X-10.998 Y8.506 F7200.000 ; move to first infill point
 G1 X-18.339 Y-4.404 E846.76554 F2832.060 ; infill
 G1 X-10.137 Y-8.486 E847.18990 ; infill
 G1 X-10.137 Y8.506 E847.97698 ; infill
 G1 X-3.829 Y1.700 E848.40683 ; infill
 G1 X-9.580 Y-8.486 E848.94866 ; infill
 G1 X1.004 Y-8.486 E849.43895 ; infill
 G1 X1.004 Y-7.391 E849.48969 ; infill
 M73 P60 ; update progress
 G1 F5760
 G1 X1.004 Y-8.486 E849.16450 ; retract
 G1 F5760
 G1 X-4.300 Y-8.486 E847.58969 ; retract
 G1 E847.48969 F1800.00000 ; retract
 G1 Z6.300 F7200.000 ; move to next layer (30)
 G1 X-1.937 Y8.786 F7200.000 ; move to first perimeter point
 G1 E849.48969 F1800.00000 ; unretract
 G1 X7.406 Y-8.786 E850.41154 F840.193 ; perimeter
 G1 X18.786 Y-8.786 E850.93868 ; perimeter
 G1 X18.786 Y8.786 E851.75263 ; perimeter
 G1 X-1.877 Y8.786 E852.70977 ; perimeter
 G1 X-2.864 Y9.343 F7200.000 ; move to first perimeter point
 G1 X7.071 Y-9.343 E853.69007 F840.193 ; perimeter
 G1 X19.343 Y-9.343 E854.25853 ; perimeter
 G1 X19.343 Y9.343 E855.12408 ; perimeter
 G1 X-2.804 Y9.343 E856.14998 ; perimeter
 G1 X-3.625 Y9.800 F7200.000 ; move to first perimeter point
 G1 X6.796 Y-9.800 E856.80907 F560.129 ; perimeter
 G1 X19.800 Y-9.800 E857.19517 ; perimeter
 G1 X19.800 Y9.800 E857.77712 ; perimeter
 G1 X-3.565 Y9.800 E858.47086 ; perimeter
 G1 X-3.325 Y9.536 F7200.000 ; move inwards before travel
 G1 X0.645 Y4.566 F7200.000 ; move to first infill point
 G1 X18.506 Y4.566 E859.29818 F2800.645 ; infill
 G1 X18.506 Y-5.231 E859.75201 ; infill
 G1 X1.706 Y2.572 E860.61005 ; infill
 G1 X6.570 Y-6.575 E861.08993 ; infill
 G1 X18.506 Y-6.575 E861.64284 ; infill
 G1 F5760
 G1 X12.106 Y-6.575 E859.74284 ; retract
 G1 E859.64284 F1800.00000 ; retract
 G1 X-7.406 Y8.786 F7200.000 ; move to first perimeter point
 G1 E861.64284 F1800.00000 ; unretract
 G1 X-18.786 Y8.786 E862.16999 F840.193 ; perimeter
 G1 X-18.786 Y-8.786 E862.98393 ; perimeter
 G1 X1.937 Y-8.786 E863.94385 ; perimeter
 G1 X-7.378 Y8.733 E864.86292 ; perimeter
 G1 X-7.071 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y9.343 E865.43138 F840.193 ; perimeter
 G1 X-19.343 Y-9.343 E866.29693 ; perimeter
 G1 X2.864 Y-9.343 E867.32561 ; perimeter
 G1 X-7.043 Y9.290 E868.30313 ; perimeter
 G1 X-6.796 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y9.800 E868.68922 F560.129 ; perimeter
 G1 X-19.800 Y-9.800 E869.27117 ; perimeter
 G1 X3.625 Y-9.800 E869.96669 ; perimeter
 G1 X-6.768 Y9.747 E870.62401 ; perimeter
 G1 X-7.106 Y9.546 F7200.000 ; move inwards before travel
 G1 X-5.501 Y4.566 F7200.000 ; move to first infill point
 G1 X-18.486 Y4.566 E871.22547 F2800.645 ; infill
 G1 X-18.486 Y4.009 E871.25127 ; infill
 G1 X-0.964 Y-3.967 E872.14307 ; infill
 G1 X0.423 Y-6.575 E872.27987 ; infill
 G1 X-18.486 Y-6.575 E873.15575 ; infill
 G1 X-18.486 Y-7.132 E873.18155 ; infill
 G1 X-15.552 Y-8.339 E873.32849 ; infill
 M73 P62 ; update progress
 G1 F5760
 G1 X-18.486 Y-7.132 E872.38673 ; retract
 G1 F5760
 G1 X-18.486 Y-6.575 E872.22135 ; retract
 G1 F5760
 G1 X-15.815 Y-6.575 E871.42849 ; retract
 G1 E871.32849 F1800.00000 ; retract
 G1 Z6.500 F7200.000 ; move to next layer (31)
 G1 X-1.711 Y8.786 F7200.000 ; move to first perimeter point
 G1 E873.32849 F1800.00000 ; unretract
 G1 X7.632 Y-8.786 E874.25034 F831.520 ; perimeter
 G1 X18.786 Y-8.786 E874.76699 ; perimeter
 G1 X18.786 Y8.786 E875.58094 ; perimeter
 G1 X-1.651 Y8.786 E876.52759 ; perimeter
 G1 X-2.638 Y9.343 F7200.000 ; move to first perimeter point
 G1 X7.297 Y-9.343 E877.50789 F831.520 ; perimeter
 G1 X19.343 Y-9.343 E878.06585 ; perimeter
 G1 X19.343 Y9.343 E878.93140 ; perimeter
 G1 X-2.578 Y9.343 E879.94681 ; perimeter
 G1 X-3.399 Y9.800 F7200.000 ; move to first perimeter point
 G1 X7.023 Y-9.800 E880.60591 F554.347 ; perimeter
 G1 X19.800 Y-9.800 E880.98528 ; perimeter
 G1 X19.800 Y9.800 E881.56723 ; perimeter
 G1 X-3.339 Y9.800 E882.25424 ; perimeter
 G1 X-3.098 Y9.536 F7200.000 ; move inwards before travel
 G1 X2.218 Y2.182 F7200.000 ; move to first infill point
 G1 X5.715 Y8.506 E882.58898 F2771.734 ; infill
 G1 X6.575 Y8.506 E882.62884 ; infill
 G1 X6.575 Y-6.013 E883.30136 ; infill
 G1 X7.529 Y-7.806 E883.39546 ; infill
 G1 X16.856 Y8.506 E884.26588 ; infill
 G1 X17.717 Y8.506 E884.30573 ; infill
 G1 X17.717 Y-8.486 E885.09281 ; infill
 G1 X18.274 Y-8.486 E885.11862 ; infill
 G1 X18.339 Y-8.041 E885.13947 ; infill
 G1 F5760
 G1 X18.274 Y-8.486 E885.00585 ; retract
 G1 F5760
 G1 X17.717 Y-8.486 E884.84047 ; retract
 G1 F5760
 G1 X17.717 Y-3.093 E883.23947 ; retract
 G1 E883.13947 F1800.00000 ; retract
 G1 X-7.632 Y8.786 F7200.000 ; move to first perimeter point
 G1 E885.13947 F1800.00000 ; unretract
 G1 X-18.786 Y8.786 E885.65612 F831.520 ; perimeter
 G1 X-18.786 Y-8.786 E886.47006 ; perimeter
 G1 X1.711 Y-8.786 E887.41949 ; perimeter
 G1 X-7.604 Y8.733 E888.33856 ; perimeter
 G1 X-7.297 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y9.343 E888.89652 F831.520 ; perimeter
 G1 X-19.343 Y-9.343 E889.76208 ; perimeter
 G1 X2.638 Y-9.343 E890.78026 ; perimeter
 G1 X-7.269 Y9.290 E891.75778 ; perimeter
 G1 X-7.023 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y9.800 E892.13715 F554.347 ; perimeter
 G1 X-19.800 Y-9.800 E892.71910 ; perimeter
 G1 X3.399 Y-9.800 E893.40790 ; perimeter
 G1 X-6.995 Y9.747 E894.06521 ; perimeter
 G1 X-7.332 Y9.546 F7200.000 ; move inwards before travel
 G1 X-15.708 Y8.506 F7200.000 ; move to first infill point
 G1 X-15.708 Y-8.486 E894.85230 F2771.734 ; infill
 G1 X-15.151 Y-8.486 E894.87810 ; infill
 G1 X-6.722 Y6.288 E895.66600 ; infill
 G1 X-4.566 Y2.235 E895.87865 ; infill
 G1 X-4.566 Y-8.486 E896.37524 ; infill
 G1 X-4.009 Y-8.486 E896.40104 ; infill
 G1 X-1.411 Y-3.700 E896.65329 ; infill
 M73 P64 ; update progress
 G1 F5760
 G1 X-4.009 Y-8.486 E895.03662 ; retract
 G1 F5760
 G1 X-4.566 Y-8.486 E894.87124 ; retract
 G1 F5760
 G1 X-4.566 Y-8.089 E894.75329 ; retract
 G1 E894.65329 F1800.00000 ; retract
 G1 Z6.700 F7200.000 ; move to next layer (32)
 G1 X-1.484 Y8.786 F7200.000 ; move to first perimeter point
 G1 E896.65329 F1800.00000 ; unretract
 G1 X7.859 Y-8.786 E897.57514 F843.506 ; perimeter
 G1 X18.786 Y-8.786 E898.08130 ; perimeter
 G1 X18.786 Y8.786 E898.89524 ; perimeter
 G1 X-1.424 Y8.786 E899.83140 ; perimeter
 G1 X-2.411 Y9.343 F7200.000 ; move to first perimeter point
 G1 X7.524 Y-9.343 E900.81170 F843.506 ; perimeter
 G1 X19.343 Y-9.343 E901.35917 ; perimeter
 G1 X19.343 Y9.343 E902.22472 ; perimeter
 G1 X-2.351 Y9.343 E903.22963 ; perimeter
 G1 X-3.172 Y9.800 F7200.000 ; move to first perimeter point
 G1 X7.249 Y-9.800 E903.88873 F562.337 ; perimeter
 G1 X19.800 Y-9.800 E904.26138 ; perimeter
 G1 X19.800 Y9.800 E904.84333 ; perimeter
 G1 X-3.112 Y9.800 E905.52362 ; perimeter
 G1 X-2.872 Y9.536 F7200.000 ; move inwards before travel
 G1 X1.098 Y4.566 F7200.000 ; move to first infill point
 G1 X18.506 Y4.566 E906.32995 F2811.687 ; infill
 G1 X18.506 Y-5.214 E906.78298 ; infill
 G1 X2.181 Y2.530 E907.61991 ; infill
 G1 X7.023 Y-6.575 E908.09757 ; infill
 G1 X18.506 Y-6.575 E908.62950 ; infill
 G1 F5760
 G1 X12.106 Y-6.575 E906.72950 ; retract
 G1 E906.62950 F1800.00000 ; retract
 G1 X-7.859 Y8.786 F7200.000 ; move to first perimeter point
 G1 E908.62950 F1800.00000 ; unretract
 G1 X-18.786 Y8.786 E909.13565 F843.506 ; perimeter
 G1 X-18.786 Y-8.786 E909.94960 ; perimeter
 G1 X1.484 Y-8.786 E910.88854 ; perimeter
 G1 X-7.831 Y8.733 E911.80761 ; perimeter
 G1 X-19.343 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y-9.343 E912.67316 F843.506 ; perimeter
 G1 X2.411 Y-9.343 E913.68085 ; perimeter
 G1 X-4.306 Y3.292 E914.34368 ; perimeter
 G1 X-19.343 Y9.343 E915.09448 ; perimeter
 G1 X-7.584 Y9.343 E915.63917 ; perimeter
 G1 X-19.800 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y-9.800 E916.22112 F562.337 ; perimeter
 G1 X3.172 Y-9.800 E916.90319 ; perimeter
 G1 X-7.249 Y9.800 E917.56229 ; perimeter
 G1 X-19.740 Y9.800 E917.93315 ; perimeter
 G1 X-19.600 Y9.454 F7200.000 ; move inwards before travel
 G1 X-5.954 Y4.566 F7200.000 ; move to first infill point
 G1 X-18.486 Y4.566 E918.51363 F2811.687 ; infill
 G1 X-18.486 Y4.009 E918.53943 ; infill
 G1 X-1.565 Y-3.688 E919.40051 ; infill
 G1 X-0.030 Y-6.575 E919.55196 ; infill
 G1 X-18.486 Y-6.575 E920.40685 ; infill
 G1 X-18.486 Y-7.132 E920.43265 ; infill
 G1 X-15.552 Y-8.339 E920.57960 ; infill
 M73 P66 ; update progress
 G1 F5760
 G1 X-18.486 Y-7.132 E919.63784 ; retract
 G1 F5760
 G1 X-18.486 Y-6.575 E919.47245 ; retract
 G1 F5760
 G1 X-15.815 Y-6.575 E918.67960 ; retract
 G1 E918.57960 F1800.00000 ; retract
 G1 Z6.900 F7200.000 ; move to next layer (33)
 G1 X-1.258 Y8.786 F7200.000 ; move to first perimeter point
 G1 E920.57960 F1800.00000 ; unretract
 G1 X8.085 Y-8.786 E921.50145 F833.152 ; perimeter
 G1 X18.786 Y-8.786 E921.99711 ; perimeter
 G1 X18.786 Y8.786 E922.81106 ; perimeter
 G1 X-1.198 Y8.786 E923.73672 ; perimeter
 G1 X-2.185 Y9.343 F7200.000 ; move to first perimeter point
 G1 X7.751 Y-9.343 E924.71702 F833.152 ; perimeter
 G1 X19.343 Y-9.343 E925.25400 ; perimeter
 G1 X19.343 Y9.343 E926.11955 ; perimeter
 G1 X-2.125 Y9.343 E927.11397 ; perimeter
 G1 X-2.946 Y9.800 F7200.000 ; move to first perimeter point
 G1 X7.476 Y-9.800 E927.77307 F555.435 ; perimeter
 G1 X19.800 Y-9.800 E928.13899 ; perimeter
 G1 X19.800 Y9.800 E928.72094 ; perimeter
 G1 X-2.886 Y9.800 E929.39450 ; perimeter
 G1 X-2.645 Y9.536 F7200.000 ; move inwards before travel
 G1 X2.455 Y2.588 F7200.000 ; move to first infill point
 G1 X5.715 Y8.506 E929.70747 F2777.175 ; infill
 G1 X6.575 Y8.506 E929.74732 ; infill
 G1 X6.575 Y-5.161 E930.38038 ; infill
 G1 X7.766 Y-7.400 E930.49787 ; infill
 G1 X16.856 Y8.506 E931.34650 ; infill
 G1 X17.717 Y8.506 E931.38636 ; infill
 G1 X17.717 Y-8.486 E932.17344 ; infill
 G1 X18.274 Y-8.486 E932.19925 ; infill
 G1 X18.339 Y-8.041 E932.22010 ; infill
 G1 F5760
 G1 X18.274 Y-8.486 E932.08648 ; retract
 G1 F5760
 G1 X17.717 Y-8.486 E931.92110 ; retract
 G1 F5760
 G1 X17.717 Y-3.093 E930.32010 ; retract
 G1 E930.22010 F1800.00000 ; retract
 G1 X-18.786 Y8.786 F7200.000 ; move to first perimeter point
 G1 E932.22010 F1800.00000 ; unretract
 G1 X-18.786 Y-8.786 E933.03404 F833.152 ; perimeter
 G1 X1.258 Y-8.786 E933.96249 ; perimeter
 G1 X-4.599 Y2.230 E934.54040 ; perimeter
 G1 X-18.786 Y8.786 E935.26431 ; perimeter
 G1 X-8.145 Y8.786 E935.75720 ; perimeter
 G1 X-19.343 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y-9.343 E936.62275 F833.152 ; perimeter
 G1 X2.185 Y-9.343 E937.61995 ; perimeter
 G1 X-7.751 Y9.343 E938.60025 ; perimeter
 G1 X-19.283 Y9.343 E939.13445 ; perimeter
 G1 X-19.800 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y-9.800 E939.71639 F555.435 ; perimeter
 G1 X2.946 Y-9.800 E940.39174 ; perimeter
 G1 X-7.476 Y9.800 E941.05084 ; perimeter
 G1 X-19.740 Y9.800 E941.41498 ; perimeter
 G1 X-19.600 Y9.454 F7200.000 ; move inwards before travel
 G1 X-15.708 Y8.506 F7200.000 ; move to first infill point
 G1 X-15.708 Y-8.486 E942.20206 F2777.175 ; infill
 G1 X-15.151 Y-8.486 E942.22786 ; infill
 G1 X-6.959 Y5.882 E942.99398 ; infill
 G1 X-4.566 Y1.383 E943.23002 ; infill
 G1 X-4.566 Y-8.486 E943.68714 ; infill
 G1 X-4.009 Y-8.486 E943.71295 ; infill
 G1 X-1.648 Y-4.106 E943.94342 ; infill
 M73 P68 ; update progress
 G1 F5760
 G1 X-4.009 Y-8.486 E942.46629 ; retract
 G1 F5760
 G1 X-4.566 Y-8.486 E942.30091 ; retract
 G1 F5760
 G1 X-4.566 Y-7.619 E942.04342 ; retract
 G1 E941.94342 F1800.00000 ; retract
 G1 Z7.100 F7200.000 ; move to next layer (34)
 G1 X-1.031 Y8.786 F7200.000 ; move to first perimeter point
 G1 E943.94342 F1800.00000 ; unretract
 G1 X8.312 Y-8.786 E944.86527 F818.752 ; perimeter
 G1 X18.786 Y-8.786 E945.35045 ; perimeter
 G1 X18.786 Y8.786 E946.16439 ; perimeter
 G1 X-0.971 Y8.786 E947.07957 ; perimeter
 G1 X-1.958 Y9.343 F7200.000 ; move to first perimeter point
 G1 X7.977 Y-9.343 E948.05987 F818.752 ; perimeter
 G1 X19.343 Y-9.343 E948.58635 ; perimeter
 G1 X19.343 Y9.343 E949.45190 ; perimeter
 G1 X-1.898 Y9.343 E950.43583 ; perimeter
 G1 X-2.719 Y9.800 F7200.000 ; move to first perimeter point
 G1 X7.702 Y-9.800 E951.09493 F545.835 ; perimeter
 G1 X19.800 Y-9.800 E951.45412 ; perimeter
 G1 X19.800 Y9.800 E952.03607 ; perimeter
 G1 X-2.659 Y9.800 E952.70291 ; perimeter
 G1 X-2.419 Y9.536 F7200.000 ; move inwards before travel
 G1 X1.551 Y4.566 F7200.000 ; move to first infill point
 G1 X18.506 Y4.566 E953.48826 F2729.173 ; infill
 G1 X18.506 Y-5.196 E953.94045 ; infill
 G1 X2.658 Y2.485 E954.75620 ; infill
 G1 X7.476 Y-6.575 E955.23151 ; infill
 G1 X18.506 Y-6.575 E955.74245 ; infill
 G1 F5760
 G1 X12.106 Y-6.575 E953.84245 ; retract
 G1 E953.74245 F1800.00000 ; retract
 G1 X-8.312 Y8.786 F7200.000 ; move to first perimeter point
 G1 E955.74245 F1800.00000 ; unretract
 G1 X-18.786 Y8.786 E956.22762 F818.752 ; perimeter
 G1 X-18.786 Y-8.786 E957.04157 ; perimeter
 G1 X1.031 Y-8.786 E957.95952 ; perimeter
 G1 X-8.284 Y8.733 E958.87859 ; perimeter
 G1 X-7.977 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y9.343 E959.40507 F818.752 ; perimeter
 G1 X-19.343 Y-9.343 E960.27063 ; perimeter
 G1 X1.958 Y-9.343 E961.25733 ; perimeter
 G1 X-7.949 Y9.290 E962.23485 ; perimeter
 G1 X-7.702 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y9.800 E962.59405 F545.835 ; perimeter
 G1 X-19.800 Y-9.800 E963.17600 ; perimeter
 G1 X2.719 Y-9.800 E963.84462 ; perimeter
 G1 X-7.674 Y9.747 E964.50193 ; perimeter
 G1 X-8.012 Y9.546 F7200.000 ; move inwards before travel
 G1 X-6.407 Y4.566 F7200.000 ; move to first infill point
 G1 X-18.486 Y4.566 E965.06143 F2729.173 ; infill
 G1 X-18.486 Y4.009 E965.08723 ; infill
 G1 X-2.167 Y-3.409 E965.91760 ; infill
 G1 X-0.483 Y-6.575 E966.08369 ; infill
 G1 X-18.486 Y-6.575 E966.91759 ; infill
 G1 X-18.486 Y-7.132 E966.94340 ; infill
 G1 X-15.552 Y-8.339 E967.09034 ; infill
 M73 P70 ; update progress
 G1 F5760
 G1 X-18.486 Y-7.132 E966.14858 ; retract
 G1 F5760
 G1 X-18.486 Y-6.575 E965.98320 ; retract
 G1 F5760
 G1 X-15.815 Y-6.575 E965.19034 ; retract
 G1 E965.09034 F1800.00000 ; retract
 G1 Z7.300 F7200.000 ; move to next layer (35)
 G1 X-0.805 Y8.786 F7200.000 ; move to first perimeter point
 G1 E967.09034 F1800.00000 ; unretract
 G1 X8.538 Y-8.786 E968.01219 F810.176 ; perimeter
 G1 X18.786 Y-8.786 E968.48687 ; perimeter
 G1 X18.786 Y8.786 E969.30081 ; perimeter
 G1 X-0.745 Y8.786 E970.20550 ; perimeter
 G1 X-1.732 Y9.343 F7200.000 ; move to first perimeter point
 G1 X8.204 Y-9.343 E971.18580 F810.176 ; perimeter
 G1 X19.343 Y-9.343 E971.70179 ; perimeter
 G1 X19.343 Y9.343 E972.56734 ; perimeter
 G1 X-1.672 Y9.343 E973.54078 ; perimeter
 G1 X-2.493 Y9.800 F7200.000 ; move to first perimeter point
 G1 X7.929 Y-9.800 E974.19987 F540.117 ; perimeter
 G1 X19.800 Y-9.800 E974.55234 ; perimeter
 G1 X19.800 Y9.800 E975.13429 ; perimeter
 G1 X-2.433 Y9.800 E975.79441 ; perimeter
 G1 X-2.192 Y9.536 F7200.000 ; move inwards before travel
 G1 X2.692 Y2.994 F7200.000 ; move to first infill point
 G1 X5.715 Y8.506 E976.08559 F2700.586 ; infill
 G1 X6.575 Y8.506 E976.12545 ; infill
 G1 X6.575 Y-4.309 E976.71904 ; infill
 G1 X8.003 Y-6.994 E976.85992 ; infill
 G1 X16.856 Y8.506 E977.68677 ; infill
 G1 X17.717 Y8.506 E977.72663 ; infill
 G1 X17.717 Y-8.486 E978.51371 ; infill
 G1 X18.274 Y-8.486 E978.53952 ; infill
 G1 X18.339 Y-8.041 E978.56036 ; infill
 G1 F5760
 G1 X18.274 Y-8.486 E978.42675 ; retract
 G1 F5760
 G1 X17.717 Y-8.486 E978.26136 ; retract
 G1 F5760
 G1 X17.717 Y-3.093 E976.66037 ; retract
 G1 E976.56036 F1800.00000 ; retract
 G1 X-8.538 Y8.786 F7200.000 ; move to first perimeter point
 G1 E978.56036 F1800.00000 ; unretract
 G1 X-18.786 Y8.786 E979.03505 F810.176 ; perimeter
 G1 X-18.786 Y-8.786 E979.84899 ; perimeter
 G1 X0.805 Y-8.786 E980.75645 ; perimeter
 G1 X-8.510 Y8.733 E981.67552 ; perimeter
 G1 X-8.204 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y9.343 E982.19151 F810.176 ; perimeter
 G1 X-19.343 Y-9.343 E983.05707 ; perimeter
 G1 X1.732 Y-9.343 E984.03328 ; perimeter
 G1 X-8.175 Y9.290 E985.01080 ; perimeter
 G1 X-7.929 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y9.800 E985.36327 F540.117 ; perimeter
 G1 X-19.800 Y-9.800 E985.94522 ; perimeter
 G1 X2.493 Y-9.800 E986.60711 ; perimeter
 G1 X-7.901 Y9.747 E987.26443 ; perimeter
 G1 X-8.238 Y9.546 F7200.000 ; move inwards before travel
 G1 X-15.708 Y8.506 F7200.000 ; move to first infill point
 G1 X-15.708 Y-8.486 E988.05151 F2700.586 ; infill
 G1 X-15.151 Y-8.486 E988.07732 ; infill
 G1 X-7.196 Y5.476 E988.82165 ; infill
 G1 X-4.566 Y0.531 E989.08108 ; infill
 G1 X-4.566 Y-8.486 E989.49874 ; infill
 G1 X-4.009 Y-8.486 E989.52454 ; infill
 G1 X-1.885 Y-4.513 E989.73325 ; infill
 M73 P72 ; update progress
 G1 F5760
 G1 X-4.009 Y-8.486 E988.39564 ; retract
 G1 F5760
 G1 X-4.566 Y-8.486 E988.23026 ; retract
 G1 F5760
 G1 X-4.566 Y-7.149 E987.83325 ; retract
 G1 E987.73325 F1800.00000 ; retract
 G1 Z7.500 F7200.000 ; move to next layer (36)
 G1 X-0.578 Y8.786 F7200.000 ; move to first perimeter point
 G1 E989.73325 F1800.00000 ; unretract
 G1 X8.765 Y-8.786 E990.65510 F808.028 ; perimeter
 G1 X18.786 Y-8.786 E991.11929 ; perimeter
 G1 X18.786 Y8.786 E991.93323 ; perimeter
 G1 X-0.518 Y8.786 E992.82742 ; perimeter
 G1 X-1.505 Y9.343 F7200.000 ; move to first perimeter point
 G1 X8.430 Y-9.343 E993.80772 F808.028 ; perimeter
 G1 X19.343 Y-9.343 E994.31322 ; perimeter
 G1 X19.343 Y9.343 E995.17878 ; perimeter
 G1 X-1.445 Y9.343 E996.14172 ; perimeter
 G1 X-2.266 Y9.800 F7200.000 ; move to first perimeter point
 G1 X8.155 Y-9.800 E996.80082 F538.685 ; perimeter
 G1 X19.800 Y-9.800 E997.14656 ; perimeter
 G1 X19.800 Y9.800 E997.72851 ; perimeter
 G1 X-2.206 Y9.800 E998.38190 ; perimeter
 G1 X-1.966 Y9.536 F7200.000 ; move inwards before travel
 G1 X2.005 Y4.566 F7200.000 ; move to first infill point
 G1 X18.506 Y4.566 E999.14626 F2693.425 ; infill
 G1 X18.506 Y-5.177 E999.59758 ; infill
 G1 X3.137 Y2.437 E1000.39208 ; infill
 G1 X7.929 Y-6.575 E1000.86488 ; infill
 G1 X18.506 Y-6.575 E1001.35483 ; infill
 G1 F5760
 G1 X12.106 Y-6.575 E999.45483 ; retract
 G1 E999.35483 F1800.00000 ; retract
 G1 X-8.765 Y8.786 F7200.000 ; move to first perimeter point
 G1 E1001.35483 F1800.00000 ; unretract
 G1 X-18.786 Y8.786 E1001.81902 F808.028 ; perimeter
 G1 X-18.786 Y-8.786 E1002.63297 ; perimeter
 G1 X0.578 Y-8.786 E1003.52994 ; perimeter
 G1 X-8.737 Y8.733 E1004.44901 ; perimeter
 G1 X-8.430 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y9.343 E1004.95451 F808.028 ; perimeter
 G1 X-19.343 Y-9.343 E1005.82006 ; perimeter
 G1 X1.505 Y-9.343 E1006.78578 ; perimeter
 G1 X-8.402 Y9.290 E1007.76330 ; perimeter
 G1 X-8.155 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y9.800 E1008.10904 F538.685 ; perimeter
 G1 X-19.800 Y-9.800 E1008.69099 ; perimeter
 G1 X2.266 Y-9.800 E1009.34616 ; perimeter
 G1 X-8.127 Y9.747 E1010.00348 ; perimeter
 G1 X-8.465 Y9.546 F7200.000 ; move inwards before travel
 G1 X-6.860 Y4.566 F7200.000 ; move to first infill point
 G1 X-18.486 Y4.566 E1010.54198 F2693.425 ; infill
 G1 X-18.486 Y4.009 E1010.56779 ; infill
 G1 X-2.768 Y-3.130 E1011.36744 ; infill
 G1 X-0.936 Y-6.575 E1011.54818 ; infill
 G1 X-18.486 Y-6.575 E1012.36110 ; infill
 G1 X-18.486 Y-7.132 E1012.38690 ; infill
 G1 X-15.552 Y-8.339 E1012.53384 ; infill
 M73 P74 ; update progress
 G1 F5760
 G1 X-18.486 Y-7.132 E1011.59208 ; retract
 G1 F5760
 G1 X-18.486 Y-6.575 E1011.42670 ; retract
 G1 F5760
 G1 X-15.815 Y-6.575 E1010.63385 ; retract
 G1 E1010.53384 F1800.00000 ; retract
 G1 Z7.700 F7200.000 ; move to next layer (37)
 G1 X-0.352 Y8.786 F7200.000 ; move to first perimeter point
 G1 E1012.53384 F1800.00000 ; unretract
 G1 X8.991 Y-8.786 E1013.45569 F799.504 ; perimeter
 G1 X18.786 Y-8.786 E1013.90939 ; perimeter
 G1 X18.786 Y8.786 E1014.72333 ; perimeter
 G1 X-0.292 Y8.786 E1015.60703 ; perimeter
 G1 X-1.279 Y9.343 F7200.000 ; move to first perimeter point
 G1 X8.657 Y-9.343 E1016.58733 F799.504 ; perimeter
 G1 X19.343 Y-9.343 E1017.08234 ; perimeter
 G1 X19.343 Y9.343 E1017.94789 ; perimeter
 G1 X-1.219 Y9.343 E1018.90034 ; perimeter
 G1 X-2.040 Y9.800 F7200.000 ; move to first perimeter point
 G1 X8.382 Y-9.800 E1019.55944 F533.002 ; perimeter
 G1 X19.800 Y-9.800 E1019.89846 ; perimeter
 G1 X19.800 Y9.800 E1020.48041 ; perimeter
 G1 X-1.980 Y9.800 E1021.12707 ; perimeter
 G1 X-1.739 Y9.536 F7200.000 ; move inwards before travel
 G1 X2.929 Y3.400 F7200.000 ; move to first infill point
 G1 X5.715 Y8.506 E1021.39648 F2665.012 ; infill
 G1 X6.575 Y8.506 E1021.43634 ; infill
 G1 X6.575 Y-3.457 E1021.99046 ; infill
 G1 X8.240 Y-6.588 E1022.15474 ; infill
 G1 X16.856 Y8.506 E1022.95981 ; infill
 G1 X17.717 Y8.506 E1022.99966 ; infill
 G1 X17.717 Y-8.486 E1023.78674 ; infill
 G1 X18.274 Y-8.486 E1023.81255 ; infill
 G1 X18.339 Y-8.041 E1023.83340 ; infill
 G1 F5760
 G1 X18.274 Y-8.486 E1023.69978 ; retract
 G1 F5760
 G1 X17.717 Y-8.486 E1023.53440 ; retract
 G1 F5760
 G1 X17.717 Y-3.093 E1021.93340 ; retract
 G1 E1021.83340 F1800.00000 ; retract
 G1 X-8.991 Y8.786 F7200.000 ; move to first perimeter point
 G1 E1023.83340 F1800.00000 ; unretract
 G1 X-18.786 Y8.786 E1024.28709 F799.504 ; perimeter
 G1 X-18.786 Y-8.786 E1025.10104 ; perimeter
 G1 X0.352 Y-8.786 E1025.98752 ; perimeter
 G1 X-8.963 Y8.733 E1026.90658 ; perimeter
 G1 X-8.657 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y9.343 E1027.40159 F799.504 ; perimeter
 G1 X-19.343 Y-9.343 E1028.26714 ; perimeter
 G1 X1.279 Y-9.343 E1029.22237 ; perimeter
 G1 X-8.628 Y9.290 E1030.19989 ; perimeter
 G1 X-8.382 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y9.800 E1030.53891 F533.002 ; perimeter
 G1 X-19.800 Y-9.800 E1031.12086 ; perimeter
 G1 X2.040 Y-9.800 E1031.76930 ; perimeter
 G1 X-8.354 Y9.747 E1032.42662 ; perimeter
 G1 X-8.691 Y9.546 F7200.000 ; move inwards before travel
 G1 X-15.708 Y8.506 F7200.000 ; move to first infill point
 G1 X-15.708 Y-8.486 E1033.21370 F2665.012 ; infill
 G1 X-15.151 Y-8.486 E1033.23951 ; infill
 G1 X-7.433 Y5.070 E1033.96206 ; infill
 G1 X-4.566 Y-0.321 E1034.24489 ; infill
 G1 X-4.566 Y-8.486 E1034.62307 ; infill
 G1 X-4.009 Y-8.486 E1034.64888 ; infill
 G1 X-2.122 Y-4.919 E1034.83582 ; infill
 M73 P76 ; update progress
 G1 F5760
 G1 X-4.009 Y-8.486 E1033.63771 ; retract
 G1 F5760
 G1 X-4.566 Y-8.486 E1033.47233 ; retract
 G1 F5760
 G1 X-4.566 Y-6.679 E1032.93582 ; retract
 G1 E1032.83582 F1800.00000 ; retract
 G1 Z7.900 F7200.000 ; move to next layer (38)
 G1 X-0.125 Y8.786 F7200.000 ; move to first perimeter point
 G1 E1034.83582 F1800.00000 ; unretract
 G1 X9.218 Y-8.786 E1035.75767 F797.300 ; perimeter
 G1 X18.786 Y-8.786 E1036.20087 ; perimeter
 G1 X18.786 Y8.786 E1037.01482 ; perimeter
 G1 X-0.065 Y8.786 E1037.88802 ; perimeter
 G1 X-1.052 Y9.343 F7200.000 ; move to first perimeter point
 G1 X8.883 Y-9.343 E1038.86832 F797.300 ; perimeter
 G1 X19.343 Y-9.343 E1039.35284 ; perimeter
 G1 X19.343 Y9.343 E1040.21839 ; perimeter
 G1 X-0.992 Y9.343 E1041.16035 ; perimeter
 G1 X-1.813 Y9.800 F7200.000 ; move to first perimeter point
 G1 X8.608 Y-9.800 E1041.81944 F531.534 ; perimeter
 G1 X19.800 Y-9.800 E1042.15174 ; perimeter
 G1 X19.800 Y9.800 E1042.73369 ; perimeter
 G1 X-1.753 Y9.800 E1043.37362 ; perimeter
 G1 X-1.513 Y9.536 F7200.000 ; move inwards before travel
 G1 X2.458 Y4.566 F7200.000 ; move to first infill point
 G1 X18.506 Y4.566 E1044.11700 F2657.668 ; infill
 G1 X18.506 Y-5.157 E1044.56741 ; infill
 G1 X3.617 Y2.386 E1045.34056 ; infill
 G1 X8.382 Y-6.575 E1045.81070 ; infill
 G1 X18.506 Y-6.575 E1046.27967 ; infill
 G1 F5760
 G1 X12.106 Y-6.575 E1044.37967 ; retract
 G1 E1044.27967 F1800.00000 ; retract
 G1 X-9.218 Y8.786 F7200.000 ; move to first perimeter point
 G1 E1046.27967 F1800.00000 ; unretract
 G1 X-18.786 Y8.786 E1046.72287 F797.300 ; perimeter
 G1 X-18.786 Y-8.786 E1047.53682 ; perimeter
 G1 X0.125 Y-8.786 E1048.41280 ; perimeter
 G1 X-9.190 Y8.733 E1049.33187 ; perimeter
 G1 X-8.883 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y9.343 E1049.81638 F797.300 ; perimeter
 G1 X-19.343 Y-9.343 E1050.68194 ; perimeter
 G1 X1.052 Y-9.343 E1051.62667 ; perimeter
 G1 X-8.855 Y9.290 E1052.60419 ; perimeter
 G1 X-8.608 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y9.800 E1052.93649 F531.534 ; perimeter
 G1 X-19.800 Y-9.800 E1053.51844 ; perimeter
 G1 X1.813 Y-9.800 E1054.16015 ; perimeter
 G1 X-8.580 Y9.747 E1054.81747 ; perimeter
 G1 X-8.918 Y9.546 F7200.000 ; move inwards before travel
 G1 X-7.313 Y4.566 F7200.000 ; move to first infill point
 G1 X-18.486 Y4.566 E1055.33499 F2657.668 ; infill
 G1 X-18.486 Y4.009 E1055.36080 ; infill
 G1 X-3.370 Y-2.851 E1056.12974 ; infill
 G1 X-1.389 Y-6.575 E1056.32512 ; infill
 G1 X-18.486 Y-6.575 E1057.11705 ; infill
 G1 X-18.486 Y-7.132 E1057.14286 ; infill
 G1 X-15.552 Y-8.339 E1057.28980 ; infill
 M73 P78 ; update progress
 G1 F5760
 G1 X-18.486 Y-7.132 E1056.34804 ; retract
 G1 F5760
 G1 X-18.486 Y-6.575 E1056.18266 ; retract
 G1 F5760
 G1 X-15.815 Y-6.575 E1055.38980 ; retract
 G1 E1055.28980 F1800.00000 ; retract
 G1 Z8.100 F7200.000 ; move to next layer (39)
 G1 X0.101 Y8.786 F7200.000 ; move to first perimeter point
 G1 E1057.28980 F1800.00000 ; unretract
 G1 X9.444 Y-8.786 E1058.21165 F788.832 ; perimeter
 G1 X18.786 Y-8.786 E1058.64436 ; perimeter
 G1 X18.786 Y8.786 E1059.45830 ; perimeter
 G1 X0.161 Y8.786 E1060.32102 ; perimeter
 G1 X-0.826 Y9.343 F7200.000 ; move to first perimeter point
 G1 X9.110 Y-9.343 E1061.30132 F788.832 ; perimeter
 G1 X19.343 Y-9.343 E1061.77534 ; perimeter
 G1 X19.343 Y9.343 E1062.64089 ; perimeter
 G1 X-0.766 Y9.343 E1063.57236 ; perimeter
 G1 X-1.587 Y9.800 F7200.000 ; move to first perimeter point
 G1 X8.835 Y-9.800 E1064.23145 F525.888 ; perimeter
 G1 X19.800 Y-9.800 E1064.55702 ; perimeter
 G1 X19.800 Y9.800 E1065.13897 ; perimeter
 G1 X-1.527 Y9.800 E1065.77218 ; perimeter
 G1 X-1.286 Y9.536 F7200.000 ; move inwards before travel
 G1 X3.166 Y3.806 F7200.000 ; move to first infill point
 G1 X5.715 Y8.506 E1066.01982 F2629.439 ; infill
 G1 X6.575 Y8.506 E1066.05967 ; infill
 G1 X6.575 Y-2.605 E1066.57433 ; infill
 G1 X8.477 Y-6.182 E1066.76200 ; infill
 G1 X16.856 Y8.506 E1067.54529 ; infill
 G1 X17.717 Y8.506 E1067.58514 ; infill
 G1 X17.717 Y-8.486 E1068.37223 ; infill
 G1 X18.274 Y-8.486 E1068.39803 ; infill
 G1 X18.339 Y-8.041 E1068.41888 ; infill
 G1 F5760
 G1 X18.274 Y-8.486 E1068.28526 ; retract
 G1 F5760
 G1 X17.717 Y-8.486 E1068.11988 ; retract
 G1 F5760
 G1 X17.717 Y-3.093 E1066.51888 ; retract
 G1 E1066.41888 F1800.00000 ; retract
 G1 X-9.444 Y8.786 F7200.000 ; move to first perimeter point
 G1 E1068.41888 F1800.00000 ; unretract
 G1 X-18.786 Y8.786 E1068.85159 F788.832 ; perimeter
 G1 X-18.786 Y-8.786 E1069.66554 ; perimeter
 G1 X-0.101 Y-8.786 E1070.53103 ; perimeter
 G1 X-9.416 Y8.733 E1071.45010 ; perimeter
 G1 X-9.110 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y9.343 E1071.92412 F788.832 ; perimeter
 G1 X-19.343 Y-9.343 E1072.78967 ; perimeter
 G1 X0.826 Y-9.343 E1073.72392 ; perimeter
 G1 X-9.081 Y9.290 E1074.70144 ; perimeter
 G1 X-8.835 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y9.800 E1075.02700 F525.888 ; perimeter
 G1 X-19.800 Y-9.800 E1075.60895 ; perimeter
 G1 X1.587 Y-9.800 E1076.24395 ; perimeter
 G1 X-8.807 Y9.747 E1076.90126 ; perimeter
 G1 X-9.144 Y9.546 F7200.000 ; move inwards before travel
 G1 X-15.708 Y8.506 F7200.000 ; move to first infill point
 G1 X-15.708 Y-8.486 E1077.68835 F2629.439 ; infill
 G1 X-15.151 Y-8.486 E1077.71415 ; infill
 G1 X-7.670 Y4.663 E1078.41492 ; infill
 G1 X-4.566 Y-1.173 E1078.72114 ; infill
 G1 X-4.566 Y-8.486 E1079.05986 ; infill
 G1 X-4.009 Y-8.486 E1079.08566 ; infill
 G1 X-2.359 Y-5.325 E1079.25084 ; infill
 M73 P80 ; update progress
 G1 F5760
 G1 X-4.009 Y-8.486 E1078.19221 ; retract
 G1 F5760
 G1 X-4.566 Y-8.486 E1078.02683 ; retract
 G1 F5760
 G1 X-4.566 Y-6.209 E1077.35084 ; retract
 G1 E1077.25084 F1800.00000 ; retract
 G1 Z8.300 F7200.000 ; move to next layer (40)
 G1 X0.328 Y8.786 F7200.000 ; move to first perimeter point
 G1 E1079.25084 F1800.00000 ; unretract
 G1 X9.671 Y-8.786 E1080.17269 F792.192 ; perimeter
 G1 X18.786 Y-8.786 E1080.59491 ; perimeter
 G1 X18.786 Y8.786 E1081.40886 ; perimeter
 G1 X0.388 Y8.786 E1082.26108 ; perimeter
 G1 X-0.599 Y9.343 F7200.000 ; move to first perimeter point
 G1 X9.336 Y-9.343 E1083.24138 F792.192 ; perimeter
 G1 X19.343 Y-9.343 E1083.70490 ; perimeter
 G1 X19.343 Y9.343 E1084.57046 ; perimeter
 G1 X-0.539 Y9.343 E1085.49143 ; perimeter
 G1 X-1.360 Y9.800 F7200.000 ; move to first perimeter point
 G1 X9.061 Y-9.800 E1086.15053 F528.128 ; perimeter
 G1 X19.800 Y-9.800 E1086.46937 ; perimeter
 G1 X19.800 Y9.800 E1087.05132 ; perimeter
 G1 X-1.300 Y9.800 E1087.67781 ; perimeter
 G1 X-1.060 Y9.536 F7200.000 ; move inwards before travel
 G1 X18.506 Y4.566 F7200.000 ; move to first infill point
 G1 X2.911 Y4.566 E1088.40020 F2640.638 ; infill
 G1 X4.099 Y2.332 E1088.51742 ; infill
 G1 X18.506 Y-5.137 E1089.26913 ; infill
 G1 X8.835 Y-6.575 E1089.72204 ; infill
 G1 X18.506 Y-6.575 E1090.17003 ; infill
 G1 F5760
 G1 X12.106 Y-6.575 E1088.27003 ; retract
 G1 E1088.17003 F1800.00000 ; retract
 G1 X-18.786 Y8.786 F7200.000 ; move to first perimeter point
 G1 E1090.17003 F1800.00000 ; unretract
 G1 X-18.786 Y-8.786 E1090.98397 F792.192 ; perimeter
 G1 X-0.328 Y-8.786 E1091.83897 ; perimeter
 G1 X-3.207 Y-3.370 E1092.12310 ; perimeter
 G1 X-18.786 Y8.786 E1093.03840 ; perimeter
 G1 X-9.731 Y8.786 E1093.45784 ; perimeter
 G1 X-19.343 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y-9.343 E1094.32339 F792.192 ; perimeter
 G1 X0.599 Y-9.343 E1095.24715 ; perimeter
 G1 X-9.336 Y9.343 E1096.22744 ; perimeter
 G1 X-19.283 Y9.343 E1096.68820 ; perimeter
 G1 X-19.800 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y-9.800 E1097.27014 F528.128 ; perimeter
 G1 X1.360 Y-9.800 E1097.89841 ; perimeter
 G1 X-9.061 Y9.800 E1098.55751 ; perimeter
 G1 X-19.740 Y9.800 E1098.87457 ; perimeter
 G1 X-19.600 Y9.454 F7200.000 ; move inwards before travel
 G1 X-7.767 Y4.566 F7200.000 ; move to first infill point
 G1 X-18.486 Y4.566 E1099.37111 F2640.638 ; infill
 G1 X-18.486 Y4.009 E1099.39691 ; infill
 G1 X-3.971 Y-2.572 E1100.13514 ; infill
 G1 X-1.842 Y-6.575 E1100.34516 ; infill
 G1 X-18.486 Y-6.575 E1101.11611 ; infill
 G1 X-18.486 Y-7.132 E1101.14192 ; infill
 G1 X-15.552 Y-8.339 E1101.28886 ; infill
 M73 P82 ; update progress
 G1 F5760
 G1 X-18.486 Y-7.132 E1100.34710 ; retract
 G1 F5760
 G1 X-18.486 Y-6.575 E1100.18172 ; retract
 G1 F5760
 G1 X-15.815 Y-6.575 E1099.38886 ; retract
 G1 E1099.28886 F1800.00000 ; retract
 G1 Z8.500 F7200.000 ; move to next layer (41)
 G1 X0.554 Y8.786 F7200.000 ; move to first perimeter point
 G1 E1101.28886 F1800.00000 ; unretract
 G1 X9.897 Y-8.786 E1102.21071 F775.578 ; perimeter
 G1 X18.786 Y-8.786 E1102.62243 ; perimeter
 G1 X18.786 Y8.786 E1103.43638 ; perimeter
 G1 X0.614 Y8.786 E1104.27811 ; perimeter
 G1 X-0.373 Y9.343 F7200.000 ; move to first perimeter point
 G1 X9.563 Y-9.343 E1105.25841 F775.578 ; perimeter
 G1 X19.343 Y-9.343 E1105.71144 ; perimeter
 G1 X19.343 Y9.343 E1106.57700 ; perimeter
 G1 X-0.313 Y9.343 E1107.48748 ; perimeter
 G1 X-1.133 Y9.800 F7200.000 ; move to first perimeter point
 G1 X9.288 Y-9.800 E1108.14657 F517.052 ; perimeter
 G1 X19.800 Y-9.800 E1108.45869 ; perimeter
 G1 X19.800 Y9.800 E1109.04064 ; perimeter
 G1 X-1.073 Y9.800 E1109.66040 ; perimeter
 G1 X-0.833 Y9.536 F7200.000 ; move inwards before travel
 G1 X6.575 Y8.506 F7200.000 ; move to first infill point
 G1 X6.575 Y-1.753 E1110.13559 F2585.261 ; infill
 G1 X8.714 Y-5.776 E1110.34665 ; infill
 G1 X16.856 Y8.506 E1111.10816 ; infill
 G1 X17.717 Y8.506 E1111.14801 ; infill
 G1 X17.717 Y-8.486 E1111.93510 ; infill
 G1 X18.274 Y-8.486 E1111.96090 ; infill
 G1 X18.339 Y-8.041 E1111.98175 ; infill
 G1 F5760
 G1 X18.274 Y-8.486 E1111.84813 ; retract
 G1 F5760
 G1 X17.717 Y-8.486 E1111.68275 ; retract
 G1 F5760
 G1 X17.717 Y-3.093 E1110.08175 ; retract
 G1 E1109.98175 F1800.00000 ; retract
 G1 X-9.897 Y8.786 F7200.000 ; move to first perimeter point
 G1 E1111.98175 F1800.00000 ; unretract
 G1 X-18.786 Y8.786 E1112.39348 F775.578 ; perimeter
 G1 X-18.786 Y-8.786 E1113.20742 ; perimeter
 G1 X-0.554 Y-8.786 E1114.05193 ; perimeter
 G1 X-9.869 Y8.733 E1114.97100 ; perimeter
 G1 X-9.563 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y9.343 E1115.42404 F775.578 ; perimeter
 G1 X-19.343 Y-9.343 E1116.28959 ; perimeter
 G1 X0.373 Y-9.343 E1117.20285 ; perimeter
 G1 X-9.534 Y9.290 E1118.18037 ; perimeter
 G1 X-9.288 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y9.800 E1118.49248 F517.052 ; perimeter
 G1 X-19.800 Y-9.800 E1119.07443 ; perimeter
 G1 X1.133 Y-9.800 E1119.69597 ; perimeter
 G1 X-9.260 Y9.747 E1120.35329 ; perimeter
 G1 X-9.597 Y9.546 F7200.000 ; move inwards before travel
 G1 X-15.708 Y8.506 F7200.000 ; move to first infill point
 G1 X-15.708 Y-8.486 E1121.14037 F2585.261 ; infill
 G1 X-15.151 Y-8.486 E1121.16618 ; infill
 G1 X-7.907 Y4.257 E1121.84517 ; infill
 G1 X-4.566 Y-2.025 E1122.17478 ; infill
 G1 X-4.566 Y-8.486 E1122.47403 ; infill
 G1 X-4.009 Y-8.486 E1122.49984 ; infill
 G1 X-2.596 Y-5.731 E1122.64326 ; infill
 M73 P84 ; update progress
 G1 F5760
 G1 X-4.009 Y-8.486 E1121.72406 ; retract
 G1 F5760
 G1 X-4.566 Y-8.486 E1121.55867 ; retract
 G1 F5760
 G1 X-4.566 Y-5.739 E1120.74326 ; retract
 G1 E1120.64326 F1800.00000 ; retract
 G1 Z8.700 F7200.000 ; move to next layer (42)
 G1 X0.781 Y8.786 F7200.000 ; move to first perimeter point
 G1 E1122.64326 F1800.00000 ; unretract
 G1 X10.124 Y-8.786 E1123.56511 F772.338 ; perimeter
 G1 X18.786 Y-8.786 E1123.96634 ; perimeter
 G1 X18.786 Y8.786 E1124.78029 ; perimeter
 G1 X0.841 Y8.786 E1125.61152 ; perimeter
 G1 X-0.146 Y9.343 F7200.000 ; move to first perimeter point
 G1 X9.789 Y-9.343 E1126.59182 F772.338 ; perimeter
 G1 X19.343 Y-9.343 E1127.03437 ; perimeter
 G1 X19.343 Y9.343 E1127.89992 ; perimeter
 G1 X-0.086 Y9.343 E1128.79991 ; perimeter
 G1 X-0.907 Y9.800 F7200.000 ; move to first perimeter point
 G1 X9.514 Y-9.800 E1129.45901 F514.892 ; perimeter
 G1 X19.800 Y-9.800 E1129.76440 ; perimeter
 G1 X19.800 Y9.800 E1130.34635 ; perimeter
 G1 X-0.847 Y9.800 E1130.95938 ; perimeter
 G1 X-0.607 Y9.536 F7200.000 ; move inwards before travel
 G1 X18.506 Y4.566 F7200.000 ; move to first infill point
 G1 X3.364 Y4.566 E1131.66079 F2574.459 ; infill
 G1 X4.582 Y2.274 E1131.78105 ; infill
 G1 X18.506 Y-5.115 E1132.51120 ; infill
 G1 X9.288 Y-6.575 E1132.94352 ; infill
 G1 X18.506 Y-6.575 E1133.37052 ; infill
 G1 F5760
 G1 X12.106 Y-6.575 E1131.47052 ; retract
 G1 E1131.37052 F1800.00000 ; retract
 G1 X-10.124 Y8.786 F7200.000 ; move to first perimeter point
 G1 E1133.37052 F1800.00000 ; unretract
 G1 X-18.786 Y8.786 E1133.77176 F772.338 ; perimeter
 G1 X-18.786 Y-8.786 E1134.58570 ; perimeter
 G1 X-0.781 Y-8.786 E1135.41972 ; perimeter
 G1 X-10.096 Y8.733 E1136.33879 ; perimeter
 G1 X-9.789 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y9.343 E1136.78133 F772.338 ; perimeter
 G1 X-19.343 Y-9.343 E1137.64689 ; perimeter
 G1 X0.146 Y-9.343 E1138.54965 ; perimeter
 G1 X-9.761 Y9.290 E1139.52717 ; perimeter
 G1 X-9.514 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y9.800 E1139.83256 F514.892 ; perimeter
 G1 X-19.800 Y-9.800 E1140.41451 ; perimeter
 G1 X0.907 Y-9.800 E1141.02933 ; perimeter
 G1 X-9.486 Y9.747 E1141.68665 ; perimeter
 G1 X-9.824 Y9.546 F7200.000 ; move inwards before travel
 G1 X-8.220 Y4.566 F7200.000 ; move to first infill point
 G1 X-18.486 Y4.566 E1142.16220 F2574.459 ; infill
 G1 X-18.486 Y4.009 E1142.18800 ; infill
 G1 X-4.573 Y-2.293 E1142.89552 ; infill
 G1 X-2.295 Y-6.575 E1143.12019 ; infill
 G1 X-18.486 Y-6.575 E1143.87015 ; infill
 G1 X-18.486 Y-7.132 E1143.89595 ; infill
 G1 X-15.552 Y-8.339 E1144.04290 ; infill
 M73 P86 ; update progress
 G1 F5760
 G1 X-18.486 Y-7.132 E1143.10114 ; retract
 G1 F5760
 G1 X-18.486 Y-6.575 E1142.93575 ; retract
 G1 F5760
 G1 X-15.815 Y-6.575 E1142.14290 ; retract
 G1 E1142.04290 F1800.00000 ; retract
 G1 Z8.900 F7200.000 ; move to next layer (43)
 G1 X1.007 Y8.786 F7200.000 ; move to first perimeter point
 G1 E1144.04290 F1800.00000 ; unretract
 G1 X10.350 Y-8.786 E1144.96474 F765.118 ; perimeter
 G1 X18.786 Y-8.786 E1145.35549 ; perimeter
 G1 X18.786 Y8.786 E1146.16943 ; perimeter
 G1 X1.067 Y8.786 E1146.99017 ; perimeter
 G1 X0.080 Y9.343 F7200.000 ; move to first perimeter point
 G1 X10.016 Y-9.343 E1147.97047 F765.118 ; perimeter
 G1 X19.343 Y-9.343 E1148.40253 ; perimeter
 G1 X19.343 Y9.343 E1149.26808 ; perimeter
 G1 X0.140 Y9.343 E1150.15757 ; perimeter
 G1 X-0.680 Y9.800 F7200.000 ; move to first perimeter point
 G1 X9.741 Y-9.800 E1150.81667 F510.079 ; perimeter
 G1 X19.800 Y-9.800 E1151.11534 ; perimeter
 G1 X19.800 Y9.800 E1151.69729 ; perimeter
 G1 X-0.620 Y9.800 E1152.30360 ; perimeter
 G1 X-0.380 Y9.536 F7200.000 ; move inwards before travel
 G1 X6.575 Y8.506 F7200.000 ; move to first infill point
 G1 X6.575 Y-0.901 E1152.73932 F2550.393 ; infill
 G1 X8.951 Y-5.370 E1152.97378 ; infill
 G1 X16.856 Y8.506 E1153.71350 ; infill
 G1 X17.717 Y8.506 E1153.75335 ; infill
 G1 X17.717 Y-8.486 E1154.54044 ; infill
 G1 X18.274 Y-8.486 E1154.56624 ; infill
 G1 X18.339 Y-8.041 E1154.58709 ; infill
 G1 F5760
 G1 X18.274 Y-8.486 E1154.45347 ; retract
 G1 F5760
 G1 X17.717 Y-8.486 E1154.28809 ; retract
 G1 F5760
 G1 X17.717 Y-3.093 E1152.68709 ; retract
 G1 E1152.58709 F1800.00000 ; retract
 G1 X-10.350 Y8.786 F7200.000 ; move to first perimeter point
 G1 E1154.58709 F1800.00000 ; unretract
 G1 X-18.786 Y8.786 E1154.97783 F765.118 ; perimeter
 G1 X-18.786 Y-8.786 E1155.79178 ; perimeter
 G1 X-1.007 Y-8.786 E1156.61530 ; perimeter
 G1 X-10.322 Y8.733 E1157.53437 ; perimeter
 G1 X-10.016 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y9.343 E1157.96642 F765.118 ; perimeter
 G1 X-19.343 Y-9.343 E1158.83197 ; perimeter
 G1 X-0.080 Y-9.343 E1159.72425 ; perimeter
 G1 X-9.987 Y9.290 E1160.70177 ; perimeter
 G1 X-9.741 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y9.800 E1161.00043 F510.079 ; perimeter
 G1 X-19.800 Y-9.800 E1161.58238 ; perimeter
 G1 X0.680 Y-9.800 E1162.19047 ; perimeter
 G1 X-9.713 Y9.747 E1162.84779 ; perimeter
 G1 X-10.050 Y9.546 F7200.000 ; move inwards before travel
 G1 X-15.708 Y8.506 F7200.000 ; move to first infill point
 G1 X-15.708 Y-8.486 E1163.63487 F2550.393 ; infill
 G1 X-15.151 Y-8.486 E1163.66068 ; infill
 G1 X-8.144 Y3.851 E1164.31788 ; infill
 G1 X-4.566 Y-2.877 E1164.67089 ; infill
 G1 X-4.566 Y-8.486 E1164.93067 ; infill
 G1 X-4.009 Y-8.486 E1164.95648 ; infill
 G1 X-2.833 Y-6.137 E1165.07816 ; infill
 M73 P88 ; update progress
 G1 F5760
 G1 X-4.009 Y-8.486 E1164.29832 ; retract
 G1 F5760
 G1 X-4.566 Y-8.486 E1164.13294 ; retract
 G1 F5760
 G1 X-4.566 Y-5.270 E1163.17816 ; retract
 G1 E1163.07816 F1800.00000 ; retract
 G1 Z9.100 F7200.000 ; move to next layer (44)
 G1 X1.234 Y8.786 F7200.000 ; move to first perimeter point
 G1 E1165.07816 F1800.00000 ; unretract
 G1 X10.577 Y-8.786 E1166.00001 F761.474 ; perimeter
 G1 X18.786 Y-8.786 E1166.38026 ; perimeter
 G1 X18.786 Y8.786 E1167.19420 ; perimeter
 G1 X1.294 Y8.786 E1168.00445 ; perimeter
 G1 X0.307 Y9.343 F7200.000 ; move to first perimeter point
 G1 X10.242 Y-9.343 E1168.98475 F761.474 ; perimeter
 G1 X19.343 Y-9.343 E1169.40631 ; perimeter
 G1 X19.343 Y9.343 E1170.27186 ; perimeter
 G1 X0.367 Y9.343 E1171.15087 ; perimeter
 G1 X-0.454 Y9.800 F7200.000 ; move to first perimeter point
 G1 X9.968 Y-9.800 E1171.80996 F507.649 ; perimeter
 G1 X19.800 Y-9.800 E1172.10190 ; perimeter
 G1 X19.800 Y9.800 E1172.68385 ; perimeter
 G1 X-0.394 Y9.800 E1173.28344 ; perimeter
 G1 X-0.154 Y9.536 F7200.000 ; move inwards before travel
 G1 X18.506 Y4.566 F7200.000 ; move to first infill point
 G1 X3.817 Y4.566 E1173.96386 F2538.247 ; infill
 G1 X5.068 Y2.212 E1174.08738 ; infill
 G1 X18.506 Y-5.092 E1174.79583 ; infill
 G1 X9.741 Y-6.575 E1175.20762 ; infill
 G1 X18.506 Y-6.575 E1175.61364 ; infill
 G1 F5760
 G1 X12.106 Y-6.575 E1173.71364 ; retract
 G1 E1173.61364 F1800.00000 ; retract
 G1 X-10.577 Y8.786 F7200.000 ; move to first perimeter point
 G1 E1175.61364 F1800.00000 ; unretract
 G1 X-18.786 Y8.786 E1175.99389 F761.474 ; perimeter
 G1 X-18.786 Y-8.786 E1176.80783 ; perimeter
 G1 X-1.234 Y-8.786 E1177.62086 ; perimeter
 G1 X-10.549 Y8.733 E1178.53993 ; perimeter
 G1 X-10.242 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y9.343 E1178.96149 F761.474 ; perimeter
 G1 X-19.343 Y-9.343 E1179.82704 ; perimeter
 G1 X-0.307 Y-9.343 E1180.70882 ; perimeter
 G1 X-10.214 Y9.290 E1181.68634 ; perimeter
 G1 X-9.968 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y9.800 E1181.97828 F507.649 ; perimeter
 G1 X-19.800 Y-9.800 E1182.56023 ; perimeter
 G1 X0.454 Y-9.800 E1183.16160 ; perimeter
 G1 X-9.939 Y9.747 E1183.81892 ; perimeter
 G1 X-10.277 Y9.546 F7200.000 ; move inwards before travel
 G1 X-8.673 Y4.566 F7200.000 ; move to first infill point
 G1 X-18.486 Y4.566 E1184.27348 F2538.247 ; infill
 G1 X-18.486 Y4.009 E1184.29929 ; infill
 G1 X-5.174 Y-2.014 E1184.97609 ; infill
 G1 X-2.749 Y-6.575 E1185.21540 ; infill
 G1 X-18.486 Y-6.575 E1185.94438 ; infill
 G1 X-18.486 Y-7.132 E1185.97019 ; infill
 G1 X-15.552 Y-8.339 E1186.11713 ; infill
 M73 P90 ; update progress
 G1 F5760
 G1 X-18.486 Y-7.132 E1185.17537 ; retract
 G1 F5760
 G1 X-18.486 Y-6.575 E1185.00998 ; retract
 G1 F5760
 G1 X-15.815 Y-6.575 E1184.21713 ; retract
 G1 E1184.11713 F1800.00000 ; retract
 G1 Z9.300 F7200.000 ; move to next layer (45)
 G1 X1.460 Y8.786 F7200.000 ; move to first perimeter point
 G1 E1186.11713 F1800.00000 ; unretract
 G1 X10.803 Y-8.786 E1187.03898 F761.928 ; perimeter
 G1 X18.786 Y-8.786 E1187.40873 ; perimeter
 G1 X18.786 Y8.786 E1188.22268 ; perimeter
 G1 X1.520 Y8.786 E1189.02244 ; perimeter
 G1 X0.533 Y9.343 F7200.000 ; move to first perimeter point
 G1 X10.469 Y-9.343 E1190.00274 F761.928 ; perimeter
 G1 X19.343 Y-9.343 E1190.41380 ; perimeter
 G1 X19.343 Y9.343 E1191.27936 ; perimeter
 G1 X0.593 Y9.343 E1192.14787 ; perimeter
 G1 X-0.227 Y9.800 F7200.000 ; move to first perimeter point
 G1 X10.194 Y-9.800 E1192.80697 F507.952 ; perimeter
 G1 X19.800 Y-9.800 E1193.09218 ; perimeter
 G1 X19.800 Y9.800 E1193.67413 ; perimeter
 G1 X-0.167 Y9.800 E1194.26699 ; perimeter
 G1 X0.073 Y9.536 F7200.000 ; move inwards before travel
 G1 X6.575 Y8.506 F7200.000 ; move to first infill point
 G1 X6.575 Y-0.049 E1194.66325 F2539.760 ; infill
 G1 X9.189 Y-4.964 E1194.92109 ; infill
 G1 X16.856 Y8.506 E1195.63903 ; infill
 G1 X17.717 Y8.506 E1195.67889 ; infill
 G1 X17.717 Y-8.486 E1196.46597 ; infill
 G1 X18.274 Y-8.486 E1196.49178 ; infill
 G1 X18.339 Y-8.041 E1196.51262 ; infill
 G1 F5760
 G1 X18.274 Y-8.486 E1196.37901 ; retract
 G1 F5760
 G1 X17.717 Y-8.486 E1196.21362 ; retract
 G1 F5760
 G1 X17.717 Y-3.093 E1194.61262 ; retract
 G1 E1194.51262 F1800.00000 ; retract
 G1 X-18.786 Y8.786 F7200.000 ; move to first perimeter point
 G1 E1196.51262 F1800.00000 ; unretract
 G1 X-18.786 Y-8.786 E1197.32657 F761.928 ; perimeter
 G1 X-1.460 Y-8.786 E1198.12911 ; perimeter
 G1 X-2.213 Y-7.370 E1198.20338 ; perimeter
 G1 X-18.786 Y8.786 E1199.27546 ; perimeter
 G1 X-10.863 Y8.786 E1199.64244 ; perimeter
 G1 X-19.343 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y-9.343 E1200.50800 F761.928 ; perimeter
 G1 X-0.533 Y-9.343 E1201.37929 ; perimeter
 G1 X-10.469 Y9.343 E1202.35958 ; perimeter
 G1 X-19.283 Y9.343 E1202.76787 ; perimeter
 G1 X-19.800 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y-9.800 E1203.34982 F507.952 ; perimeter
 G1 X0.227 Y-9.800 E1203.94446 ; perimeter
 G1 X-10.194 Y9.800 E1204.60356 ; perimeter
 G1 X-19.740 Y9.800 E1204.88699 ; perimeter
 G1 X-19.600 Y9.454 F7200.000 ; move inwards before travel
 G1 X-15.708 Y8.506 F7200.000 ; move to first infill point
 G1 X-15.708 Y-8.486 E1205.67408 F2539.760 ; infill
 G1 X-15.151 Y-8.486 E1205.69988 ; infill
 G1 X-8.381 Y3.445 E1206.33531 ; infill
 G1 X-4.566 Y-3.730 E1206.71170 ; infill
 G1 X-4.566 Y-8.486 E1206.93202 ; infill
 G1 X-4.009 Y-8.486 E1206.95783 ; infill
 G1 X-3.070 Y-6.543 E1207.05778 ; infill
 M73 P92 ; update progress
 G1 F5760
 G1 X-4.009 Y-8.486 E1206.41720 ; retract
 G1 F5760
 G1 X-4.566 Y-8.486 E1206.25182 ; retract
 G1 F5760
 G1 X-4.566 Y-4.801 E1205.15778 ; retract
 G1 E1205.05778 F1800.00000 ; retract
 G1 Z9.500 F7200.000 ; move to next layer (46)
 G1 X1.687 Y8.786 F7200.000 ; move to first perimeter point
 G1 E1207.05778 F1800.00000 ; unretract
 G1 X11.030 Y-8.786 E1207.97962 F750.078 ; perimeter
 G1 X18.786 Y-8.786 E1208.33889 ; perimeter
 G1 X18.786 Y8.786 E1209.15283 ; perimeter
 G1 X1.747 Y8.786 E1209.94210 ; perimeter
 G1 X0.760 Y9.343 F7200.000 ; move to first perimeter point
 G1 X10.695 Y-9.343 E1210.92240 F750.078 ; perimeter
 G1 X19.343 Y-9.343 E1211.32297 ; perimeter
 G1 X19.343 Y9.343 E1212.18853 ; perimeter
 G1 X0.820 Y9.343 E1213.04655 ; perimeter
 G1 X-0.001 Y9.800 F7200.000 ; move to first perimeter point
 G1 X10.421 Y-9.800 E1213.70564 F500.052 ; perimeter
 G1 X19.800 Y-9.800 E1213.98413 ; perimeter
 G1 X19.800 Y9.800 E1214.56608 ; perimeter
 G1 X0.059 Y9.800 E1215.15221 ; perimeter
 G1 X0.299 Y9.536 F7200.000 ; move inwards before travel
 G1 X18.506 Y4.566 F7200.000 ; move to first infill point
 G1 X4.270 Y4.566 E1215.81166 F2500.261 ; infill
 G1 X5.557 Y2.145 E1215.93868 ; infill
 G1 X18.506 Y-5.068 E1216.62528 ; infill
 G1 X10.194 Y-6.575 E1217.01658 ; infill
 G1 X18.506 Y-6.575 E1217.40162 ; infill
 G1 F5760
 G1 X12.106 Y-6.575 E1215.50162 ; retract
 G1 E1215.40162 F1800.00000 ; retract
 G1 X-11.030 Y8.786 F7200.000 ; move to first perimeter point
 G1 E1217.40162 F1800.00000 ; unretract
 G1 X-18.786 Y8.786 E1217.76088 F750.078 ; perimeter
 G1 X-18.786 Y-8.786 E1218.57483 ; perimeter
 G1 X-1.687 Y-8.786 E1219.36687 ; perimeter
 G1 X-11.002 Y8.733 E1220.28594 ; perimeter
 G1 X-10.695 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y9.343 E1220.68652 F750.078 ; perimeter
 G1 X-19.343 Y-9.343 E1221.55207 ; perimeter
 G1 X-0.760 Y-9.343 E1222.41287 ; perimeter
 G1 X-10.667 Y9.290 E1223.39039 ; perimeter
 G1 X-10.421 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y9.800 E1223.66887 F500.052 ; perimeter
 G1 X-19.800 Y-9.800 E1224.25082 ; perimeter
 G1 X0.001 Y-9.800 E1224.83874 ; perimeter
 G1 X-10.392 Y9.747 E1225.49606 ; perimeter
 G1 X-10.730 Y9.546 F7200.000 ; move inwards before travel
 G1 X-9.126 Y4.566 F7200.000 ; move to first infill point
 G1 X-18.486 Y4.566 E1225.92964 F2500.261 ; infill
 G1 X-18.486 Y4.009 E1225.95544 ; infill
 G1 X-4.186 Y-4.724 E1226.73159 ; infill
 G1 X-3.202 Y-6.575 E1226.82872 ; infill
 G1 X-18.486 Y-6.575 E1227.53671 ; infill
 G1 X-18.486 Y-7.132 E1227.56252 ; infill
 G1 X-16.222 Y-8.339 E1227.68133 ; infill
 M73 P94 ; update progress
 G1 F5760
 G1 X-18.486 Y-7.132 E1226.91984 ; retract
 G1 F5760
 G1 X-18.486 Y-6.575 E1226.75445 ; retract
 G1 F5760
 G1 X-15.208 Y-6.575 E1225.78134 ; retract
 G1 E1225.68133 F1800.00000 ; retract
 G1 Z9.700 F7200.000 ; move to next layer (47)
 G1 X1.913 Y8.786 F7200.000 ; move to first perimeter point
 G1 E1227.68133 F1800.00000 ; unretract
 G1 X11.256 Y-8.786 E1228.60318 F3543.025 ; perimeter
 G1 X18.786 Y-8.786 E1228.95196 ; perimeter
 G1 X18.786 Y8.786 E1229.76590 ; perimeter
 G1 X1.973 Y8.786 E1230.54467 ; perimeter
 G1 X0.986 Y9.343 F7200.000 ; move to first perimeter point
 G1 X10.922 Y-9.343 E1231.52497 F3543.025 ; perimeter
 G1 X19.343 Y-9.343 E1231.91506 ; perimeter
 G1 X19.343 Y9.343 E1232.78061 ; perimeter
 G1 X1.046 Y9.343 E1233.62814 ; perimeter
 G1 X0.226 Y9.800 F7200.000 ; move to first perimeter point
 G1 X10.647 Y-9.800 E1234.28723 F2362.017 ; perimeter
 G1 X19.800 Y-9.800 E1234.55900 ; perimeter
 G1 X19.800 Y9.800 E1235.14095 ; perimeter
 G1 X0.286 Y9.800 E1235.72035 ; perimeter
 G1 X0.526 Y9.536 F7200.000 ; move inwards before travel
 G1 X2.917 Y8.141 F7200.000 ; move to first infill point
 M126 ; enable fan
 G1 X2.917 Y8.454 E1235.73693 F1680.000 ; infill
 G1 X3.370 Y8.454 E1235.76095 ; infill
 G1 X3.370 Y7.289 E1235.82270 ; infill
 G1 X3.823 Y6.437 E1235.87387 ; infill
 G1 X3.823 Y8.454 E1235.98080 ; infill
 G1 X4.276 Y8.454 E1236.00482 ; infill
 G1 X4.276 Y5.585 E1236.15693 ; infill
 G1 X4.729 Y4.733 E1236.20809 ; infill
 G1 X4.729 Y8.454 E1236.40537 ; infill
 G1 X5.182 Y8.454 E1236.42939 ; infill
 G1 X5.182 Y3.881 E1236.67185 ; infill
 G1 X5.635 Y3.030 E1236.72302 ; infill
 G1 X5.635 Y8.454 E1237.01066 ; infill
 G1 X6.088 Y8.454 E1237.03468 ; infill
 G1 X6.088 Y2.178 E1237.36749 ; infill
 G1 X6.541 Y1.326 E1237.41865 ; infill
 G1 X6.541 Y8.454 E1237.79664 ; infill
 G1 X6.994 Y8.454 E1237.82066 ; infill
 G1 X6.994 Y0.474 E1238.24383 ; infill
 G1 X7.447 Y-0.378 E1238.29500 ; infill
 G1 X7.447 Y8.454 E1238.76334 ; infill
 G1 X7.900 Y8.454 E1238.78736 ; infill
 G1 X7.900 Y-1.230 E1239.30088 ; infill
 G1 X8.353 Y-2.082 E1239.35204 ; infill
 G1 X8.353 Y8.454 E1239.91074 ; infill
 G1 X8.806 Y8.454 E1239.93476 ; infill
 G1 X8.806 Y-2.934 E1240.53863 ; infill
 G1 X9.259 Y-3.786 E1240.58980 ; infill
 G1 X9.259 Y8.454 E1241.23884 ; infill
 G1 X9.712 Y8.454 E1241.26287 ; infill
 G1 X9.712 Y-4.638 E1241.95709 ; infill
 G1 X10.165 Y-5.490 E1242.00826 ; infill
 G1 X10.165 Y8.454 E1242.74766 ; infill
 G1 X10.618 Y8.454 E1242.77168 ; infill
 G1 X10.618 Y-6.342 E1243.55626 ; infill
 G1 X11.071 Y-7.194 E1243.60742 ; infill
 G1 X11.071 Y8.454 E1244.43718 ; infill
 G1 X11.524 Y8.454 E1244.46120 ; infill
 G1 X11.524 Y-8.046 E1245.33613 ; infill
 G1 X11.977 Y-8.454 E1245.36846 ; infill
 G1 X11.977 Y8.454 E1246.26502 ; infill
 G1 X12.430 Y8.454 E1246.28904 ; infill
 G1 X12.430 Y-8.454 E1247.18561 ; infill
 G1 X12.883 Y-8.454 E1247.20963 ; infill
 G1 X12.883 Y8.454 E1248.10620 ; infill
 G1 X13.336 Y8.454 E1248.13022 ; infill
 G1 X13.336 Y-8.454 E1249.02679 ; infill
 G1 X13.789 Y-8.454 E1249.05081 ; infill
 G1 X13.789 Y8.454 E1249.94737 ; infill
 G1 X14.242 Y8.454 E1249.97139 ; infill
 G1 X14.242 Y-8.454 E1250.86796 ; infill
 G1 X14.695 Y-8.454 E1250.89198 ; infill
 G1 X14.695 Y8.454 E1251.78855 ; infill
 G1 X15.148 Y8.454 E1251.81257 ; infill
 G1 X15.148 Y-8.454 E1252.70913 ; infill
 G1 X15.601 Y-8.454 E1252.73315 ; infill
 G1 X15.601 Y8.454 E1253.62972 ; infill
 G1 X16.054 Y8.454 E1253.65374 ; infill
 G1 X16.054 Y-8.454 E1254.55031 ; infill
 G1 X16.507 Y-8.454 E1254.57433 ; infill
 G1 X16.507 Y8.454 E1255.47090 ; infill
 G1 X16.960 Y8.454 E1255.49492 ; infill
 G1 X16.960 Y-8.454 E1256.39148 ; infill
 G1 X17.413 Y-8.454 E1256.41550 ; infill
 G1 X17.413 Y8.454 E1257.31207 ; infill
 G1 X17.866 Y8.454 E1257.33609 ; infill
 G1 X17.866 Y-8.454 E1258.23266 ; infill
 G1 X18.319 Y-8.454 E1258.25668 ; infill
 G1 X18.319 Y8.454 E1259.15324 ; infill
 M126 ; enable fan
 G1 F5760
 G1 X18.319 Y2.054 E1257.25324 ; retract
 G1 E1257.15324 F1800.00000 ; retract
 G1 X-11.256 Y8.786 F7200.000 ; move to first perimeter point
 G1 E1259.15324 F1800.00000 ; unretract
 G1 X-18.786 Y8.786 E1259.50202 F3543.025 ; perimeter
 G1 X-18.786 Y-8.786 E1260.31596 ; perimeter
 G1 X-1.913 Y-8.786 E1261.09752 ; perimeter
 G1 X-11.228 Y8.733 E1262.01658 ; perimeter
 G1 X-10.922 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y9.343 E1262.40667 F3543.025 ; perimeter
 G1 X-19.343 Y-9.343 E1263.27222 ; perimeter
 G1 X-0.986 Y-9.343 E1264.12252 ; perimeter
 G1 X-10.894 Y9.290 E1265.10004 ; perimeter
 G1 X-10.647 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y9.800 E1265.37181 F2362.017 ; perimeter
 G1 X-19.800 Y-9.800 E1265.95376 ; perimeter
 G1 X-0.226 Y-9.800 E1266.53495 ; perimeter
 G1 X-10.619 Y9.747 E1267.19226 ; perimeter
 G1 X-10.956 Y9.546 F7200.000 ; move inwards before travel
 G1 X-2.917 Y-8.141 F7200.000 ; move to first infill point
 M126 ; enable fan
 G1 X-2.917 Y-8.454 E1267.20884 F1680.000 ; infill
 G1 X-3.370 Y-8.454 E1267.23286 ; infill
 G1 X-3.370 Y-7.289 E1267.29461 ; infill
 G1 X-3.823 Y-6.437 E1267.34578 ; infill
 G1 X-3.823 Y-8.454 E1267.45271 ; infill
 G1 X-4.276 Y-8.454 E1267.47673 ; infill
 G1 X-4.276 Y-5.585 E1267.62883 ; infill
 G1 X-4.729 Y-4.733 E1267.68000 ; infill
 G1 X-4.729 Y-8.454 E1267.87728 ; infill
 G1 X-5.182 Y-8.454 E1267.90130 ; infill
 G1 X-5.182 Y-3.881 E1268.14376 ; infill
 G1 X-5.635 Y-3.030 E1268.19493 ; infill
 G1 X-5.635 Y-8.454 E1268.48256 ; infill
 G1 X-6.088 Y-8.454 E1268.50658 ; infill
 G1 X-6.088 Y-2.178 E1268.83940 ; infill
 G1 X-6.541 Y-1.326 E1268.89056 ; infill
 G1 X-6.541 Y-8.454 E1269.26855 ; infill
 G1 X-6.994 Y-8.454 E1269.29257 ; infill
 G1 X-6.994 Y-0.474 E1269.71574 ; infill
 G1 X-7.447 Y0.378 E1269.76690 ; infill
 G1 X-7.447 Y-8.454 E1270.23524 ; infill
 G1 X-7.900 Y-8.454 E1270.25927 ; infill
 G1 X-7.900 Y1.230 E1270.77278 ; infill
 G1 X-8.353 Y2.082 E1270.82395 ; infill
 G1 X-8.353 Y-8.454 E1271.38264 ; infill
 G1 X-8.806 Y-8.454 E1271.40666 ; infill
 G1 X-8.806 Y2.934 E1272.01054 ; infill
 G1 X-9.259 Y3.786 E1272.06170 ; infill
 G1 X-9.259 Y-8.454 E1272.71075 ; infill
 G1 X-9.712 Y-8.454 E1272.73477 ; infill
 G1 X-9.712 Y4.638 E1273.42899 ; infill
 G1 X-10.165 Y5.490 E1273.48016 ; infill
 G1 X-10.165 Y-8.454 E1274.21956 ; infill
 G1 X-10.618 Y-8.454 E1274.24358 ; infill
 G1 X-10.618 Y6.342 E1275.02816 ; infill
 G1 X-11.071 Y7.194 E1275.07932 ; infill
 G1 X-11.071 Y-8.454 E1275.90908 ; infill
 G1 X-11.524 Y-8.454 E1275.93310 ; infill
 G1 X-11.524 Y8.046 E1276.80803 ; infill
 G1 X-11.977 Y8.454 E1276.84036 ; infill
 G1 X-11.977 Y-8.454 E1277.73692 ; infill
 G1 X-12.430 Y-8.454 E1277.76094 ; infill
 G1 X-12.430 Y8.454 E1278.65751 ; infill
 G1 X-12.883 Y8.454 E1278.68153 ; infill
 G1 X-12.883 Y-8.454 E1279.57810 ; infill
 G1 X-13.336 Y-8.454 E1279.60212 ; infill
 G1 X-13.336 Y8.454 E1280.49868 ; infill
 G1 X-13.789 Y8.454 E1280.52270 ; infill
 G1 X-13.789 Y-8.454 E1281.41927 ; infill
 G1 X-14.242 Y-8.454 E1281.44329 ; infill
 G1 X-14.242 Y8.454 E1282.33985 ; infill
 G1 X-14.695 Y8.454 E1282.36388 ; infill
 G1 X-14.695 Y-8.454 E1283.26044 ; infill
 G1 X-15.148 Y-8.454 E1283.28446 ; infill
 G1 X-15.148 Y8.454 E1284.18103 ; infill
 G1 X-15.601 Y8.454 E1284.20505 ; infill
 G1 X-15.601 Y-8.454 E1285.10161 ; infill
 G1 X-16.054 Y-8.454 E1285.12563 ; infill
 G1 X-16.054 Y8.454 E1286.02220 ; infill
 G1 X-16.507 Y8.454 E1286.04622 ; infill
 G1 X-16.507 Y-8.454 E1286.94279 ; infill
 G1 X-16.960 Y-8.454 E1286.96681 ; infill
 G1 X-16.960 Y8.454 E1287.86337 ; infill
 G1 X-17.413 Y8.454 E1287.88739 ; infill
 G1 X-17.413 Y-8.454 E1288.78396 ; infill
 G1 X-17.866 Y-8.454 E1288.80798 ; infill
 G1 X-17.866 Y8.454 E1289.70454 ; infill
 G1 X-18.319 Y8.454 E1289.72857 ; infill
 G1 X-18.319 Y-8.454 E1290.62513 ; infill
 M126 ; enable fan
 M73 P96 ; update progress
 G1 F5760
 G1 X-18.319 Y-2.054 E1288.72513 ; retract
 G1 E1288.62513 F1800.00000 ; retract
 G1 Z9.900 F7200.000 ; move to next layer (48)
 G1 X2.140 Y8.786 F7200.000 ; move to first perimeter point
 G1 E1290.62513 F1800.00000 ; unretract
 G1 X11.483 Y-8.786 E1291.54698 F1019.477 ; perimeter
 G1 X18.786 Y-8.786 E1291.88526 ; perimeter
 G1 X18.786 Y8.786 E1292.69920 ; perimeter
 G1 X2.200 Y8.786 E1293.46749 ; perimeter
 G1 X1.213 Y9.343 F7200.000 ; move to first perimeter point
 G1 X11.148 Y-9.343 E1294.44779 F1019.477 ; perimeter
 G1 X19.343 Y-9.343 E1294.82738 ; perimeter
 G1 X19.343 Y9.343 E1295.69293 ; perimeter
 G1 X1.273 Y9.343 E1296.52996 ; perimeter
 G1 X0.452 Y9.800 F7200.000 ; move to first perimeter point
 G1 X10.874 Y-9.800 E1297.18906 F679.651 ; perimeter
 G1 X19.800 Y-9.800 E1297.45410 ; perimeter
 G1 X19.800 Y9.800 E1298.03605 ; perimeter
 G1 X0.512 Y9.800 E1298.60873 ; perimeter
 G1 X0.752 Y9.536 F7200.000 ; move inwards before travel
 G1 X18.486 Y8.319 F7200.000 ; move to first infill point
 G1 X2.750 Y8.319 E1299.35939 F3398.256 ; infill
 G1 X3.033 Y7.745 E1299.38990 ; infill
 G1 X18.486 Y7.745 E1300.12709 ; infill
 G1 X18.486 Y7.171 E1300.15445 ; infill
 G1 X3.338 Y7.171 E1300.87709 ; infill
 G1 X3.643 Y6.598 E1300.90809 ; infill
 G1 X18.486 Y6.598 E1301.61618 ; infill
 G1 X18.486 Y6.024 E1301.64355 ; infill
 G1 X3.948 Y6.024 E1302.33708 ; infill
 G1 X4.253 Y5.450 E1302.36808 ; infill
 G1 X18.486 Y5.450 E1303.04706 ; infill
 G1 X18.486 Y4.877 E1303.07443 ; infill
 G1 X4.558 Y4.877 E1303.73886 ; infill
 G1 X4.863 Y4.303 E1303.76986 ; infill
 G1 X18.486 Y4.303 E1304.41974 ; infill
 G1 X18.486 Y3.729 E1304.44711 ; infill
 G1 X5.168 Y3.729 E1305.08243 ; infill
 G1 X5.473 Y3.155 E1305.11343 ; infill
 G1 X18.486 Y3.155 E1305.73421 ; infill
 G1 X18.486 Y2.582 E1305.76157 ; infill
 G1 X5.778 Y2.582 E1306.36780 ; infill
 G1 X6.083 Y2.008 E1306.39879 ; infill
 G1 X18.486 Y2.008 E1306.99047 ; infill
 G1 X18.486 Y1.434 E1307.01783 ; infill
 G1 X6.388 Y1.434 E1307.59495 ; infill
 G1 X6.693 Y0.861 E1307.62595 ; infill
 G1 X18.486 Y0.861 E1308.18852 ; infill
 G1 X18.486 Y0.287 E1308.21589 ; infill
 G1 X6.998 Y0.287 E1308.76390 ; infill
 G1 X7.303 Y-0.287 E1308.79490 ; infill
 G1 X18.486 Y-0.287 E1309.32836 ; infill
 G1 X18.486 Y-0.861 E1309.35573 ; infill
 G1 X7.608 Y-0.861 E1309.87464 ; infill
 G1 X7.913 Y-1.434 E1309.90564 ; infill
 G1 X18.486 Y-1.434 E1310.41000 ; infill
 G1 X18.486 Y-2.008 E1310.43737 ; infill
 G1 X8.218 Y-2.008 E1310.92718 ; infill
 G1 X8.523 Y-2.582 E1310.95817 ; infill
 G1 X18.486 Y-2.582 E1311.43343 ; infill
 G1 X18.486 Y-3.155 E1311.46080 ; infill
 G1 X8.828 Y-3.155 E1311.92150 ; infill
 G1 X9.133 Y-3.729 E1311.95250 ; infill
 G1 X18.486 Y-3.729 E1312.39865 ; infill
 G1 X18.486 Y-4.303 E1312.42602 ; infill
 G1 X9.438 Y-4.303 E1312.85762 ; infill
 G1 X9.744 Y-4.877 E1312.88862 ; infill
 G1 X18.486 Y-4.877 E1313.30566 ; infill
 G1 X18.486 Y-5.450 E1313.33303 ; infill
 G1 X10.049 Y-5.450 E1313.73553 ; infill
 G1 X10.354 Y-6.024 E1313.76652 ; infill
 G1 X18.486 Y-6.024 E1314.15447 ; infill
 G1 X18.486 Y-6.598 E1314.18184 ; infill
 G1 X10.659 Y-6.598 E1314.55523 ; infill
 G1 X10.964 Y-7.171 E1314.58623 ; infill
 G1 X18.486 Y-7.171 E1314.94507 ; infill
 G1 X18.486 Y-7.745 E1314.97244 ; infill
 G1 X11.269 Y-7.745 E1315.31672 ; infill
 G1 X11.574 Y-8.319 E1315.34772 ; infill
 G1 X18.486 Y-8.319 E1315.67746 ; infill
 G1 F5760
 G1 X12.086 Y-8.319 E1313.77746 ; retract
 G1 E1313.67746 F1800.00000 ; retract
 G1 X-11.483 Y8.786 F7200.000 ; move to first perimeter point
 G1 E1315.67746 F1800.00000 ; unretract
 G1 X-18.786 Y8.786 E1316.01574 F1019.477 ; perimeter
 G1 X-18.786 Y-8.786 E1316.82968 ; perimeter
 G1 X-2.140 Y-8.786 E1317.60074 ; perimeter
 G1 X-11.455 Y8.733 E1318.51981 ; perimeter
 G1 X-11.148 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y9.343 E1318.89940 F1019.477 ; perimeter
 G1 X-19.343 Y-9.343 E1319.76496 ; perimeter
 G1 X-1.213 Y-9.343 E1320.60477 ; perimeter
 G1 X-11.120 Y9.290 E1321.58229 ; perimeter
 G1 X-10.874 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y9.800 E1321.84732 F679.651 ; perimeter
 G1 X-19.800 Y-9.800 E1322.42927 ; perimeter
 G1 X-0.452 Y-9.800 E1323.00374 ; perimeter
 G1 X-10.845 Y9.747 E1323.66105 ; perimeter
 G1 X-11.183 Y9.546 F7200.000 ; move inwards before travel
 G1 X-11.574 Y8.319 F7200.000 ; move to first infill point
 G1 X-18.486 Y8.319 E1323.99079 F3398.256 ; infill
 G1 X-18.486 Y7.745 E1324.01816 ; infill
 G1 X-11.269 Y7.745 E1324.36245 ; infill
 G1 X-10.964 Y7.171 E1324.39344 ; infill
 G1 X-18.486 Y7.171 E1324.75228 ; infill
 G1 X-18.486 Y6.598 E1324.77965 ; infill
 G1 X-10.659 Y6.598 E1325.15304 ; infill
 G1 X-10.354 Y6.024 E1325.18404 ; infill
 G1 X-18.486 Y6.024 E1325.57198 ; infill
 G1 X-18.486 Y5.450 E1325.59935 ; infill
 G1 X-10.049 Y5.450 E1326.00185 ; infill
 G1 X-9.744 Y4.877 E1326.03285 ; infill
 G1 X-18.486 Y4.877 E1326.44989 ; infill
 G1 X-18.486 Y4.303 E1326.47726 ; infill
 G1 X-9.438 Y4.303 E1326.90886 ; infill
 G1 X-9.133 Y3.729 E1326.93986 ; infill
 G1 X-18.486 Y3.729 E1327.38601 ; infill
 G1 X-18.486 Y3.155 E1327.41338 ; infill
 G1 X-8.828 Y3.155 E1327.87408 ; infill
 G1 X-8.523 Y2.582 E1327.90508 ; infill
 G1 X-18.486 Y2.582 E1328.38033 ; infill
 G1 X-18.486 Y2.008 E1328.40770 ; infill
 G1 X-8.218 Y2.008 E1328.89751 ; infill
 G1 X-7.913 Y1.434 E1328.92851 ; infill
 G1 X-18.486 Y1.434 E1329.43286 ; infill
 G1 X-18.486 Y0.861 E1329.46023 ; infill
 G1 X-7.608 Y0.861 E1329.97914 ; infill
 G1 X-7.303 Y0.287 E1330.01014 ; infill
 G1 X-18.486 Y0.287 E1330.54360 ; infill
 G1 X-18.486 Y-0.287 E1330.57097 ; infill
 G1 X-6.998 Y-0.287 E1331.11899 ; infill
 G1 X-6.693 Y-0.861 E1331.14998 ; infill
 G1 X-18.486 Y-0.861 E1331.71255 ; infill
 G1 X-18.486 Y-1.434 E1331.73992 ; infill
 G1 X-6.388 Y-1.434 E1332.31704 ; infill
 G1 X-6.083 Y-2.008 E1332.34804 ; infill
 G1 X-18.486 Y-2.008 E1332.93971 ; infill
 G1 X-18.486 Y-2.582 E1332.96707 ; infill
 G1 X-5.778 Y-2.582 E1333.57330 ; infill
 G1 X-5.473 Y-3.155 E1333.60429 ; infill
 G1 X-18.486 Y-3.155 E1334.22507 ; infill
 G1 X-18.486 Y-3.729 E1334.25244 ; infill
 G1 X-5.168 Y-3.729 E1334.88776 ; infill
 G1 X-4.863 Y-4.303 E1334.91876 ; infill
 G1 X-18.486 Y-4.303 E1335.56864 ; infill
 G1 X-18.486 Y-4.877 E1335.59601 ; infill
 G1 X-4.558 Y-4.877 E1336.26044 ; infill
 G1 X-4.253 Y-5.450 E1336.29144 ; infill
 G1 X-18.486 Y-5.450 E1336.97042 ; infill
 G1 X-18.486 Y-6.024 E1336.99779 ; infill
 G1 X-3.948 Y-6.024 E1337.69132 ; infill
 G1 X-3.643 Y-6.598 E1337.72232 ; infill
 G1 X-18.486 Y-6.598 E1338.43040 ; infill
 G1 X-18.486 Y-7.171 E1338.45777 ; infill
 G1 X-3.338 Y-7.171 E1339.18041 ; infill
 G1 X-3.033 Y-7.745 E1339.21141 ; infill
 G1 X-18.486 Y-7.745 E1339.94860 ; infill
 G1 X-18.486 Y-8.319 E1339.97597 ; infill
 G1 X-2.750 Y-8.319 E1340.72663 ; infill
 M73 P98 ; update progress
 G1 F5760
 G1 X-9.150 Y-8.319 E1338.82663 ; retract
 G1 E1338.72663 F1800.00000 ; retract
 G1 Z10.100 F7200.000 ; move to next layer (49)
 G1 X2.366 Y8.786 F7200.000 ; move to first perimeter point
 G1 E1340.72663 F1800.00000 ; unretract
 G1 X11.709 Y-8.786 E1341.64848 F2293.786 ; perimeter
 G1 X18.786 Y-8.786 E1341.97627 ; perimeter
 G1 X18.786 Y8.786 E1342.79021 ; perimeter
 G1 X2.426 Y8.786 E1343.54800 ; perimeter
 G1 X1.439 Y9.343 F7200.000 ; move to first perimeter point
 G1 X11.375 Y-9.343 E1344.52830 F2293.786 ; perimeter
 G1 X19.343 Y-9.343 E1344.89740 ; perimeter
 G1 X19.343 Y9.343 E1345.76295 ; perimeter
 G1 X1.499 Y9.343 E1346.58949 ; perimeter
 G1 X0.679 Y9.800 F7200.000 ; move to first perimeter point
 G1 X11.100 Y-9.800 E1347.24859 F1529.191 ; perimeter
 G1 X19.800 Y-9.800 E1347.50690 ; perimeter
 G1 X19.800 Y9.800 E1348.08885 ; perimeter
 G1 X0.739 Y9.800 E1348.65481 ; perimeter
 G1 X0.979 Y9.536 F7200.000 ; move inwards before travel
 G1 F5760
 G1 X3.730 Y4.142 E1346.75481 ; retract
 G1 E1346.65481 F1800.00000 ; retract
 G1 X3.144 Y8.169 F7200.000 ; move to first infill point
 G1 E1348.65481 F1800.00000 ; unretract
 G1 X3.144 Y8.426 E1348.66252 F2293.786 ; infill
 G1 X3.505 Y8.426 E1348.67338 ; infill
 G1 X3.505 Y7.490 E1348.70151 ; infill
 G1 X3.866 Y6.810 E1348.72463 ; infill
 G1 X3.866 Y8.426 E1348.77317 ; infill
 G1 X4.228 Y8.426 E1348.78403 ; infill
 G1 X4.228 Y6.131 E1348.85299 ; infill
 G1 X4.589 Y5.451 E1348.87611 ; infill
 G1 X4.589 Y8.426 E1348.96549 ; infill
 G1 X4.950 Y8.426 E1348.97634 ; infill
 G1 X4.950 Y4.771 E1349.08613 ; infill
 G1 X5.312 Y4.092 E1349.10925 ; infill
 G1 X5.312 Y8.426 E1349.23946 ; infill
 G1 X5.673 Y8.426 E1349.25031 ; infill
 G1 X5.673 Y3.412 E1349.40094 ; infill
 G1 X6.034 Y2.733 E1349.42406 ; infill
 G1 X6.034 Y8.426 E1349.59509 ; infill
 G1 X6.396 Y8.426 E1349.60595 ; infill
 G1 X6.396 Y2.053 E1349.79740 ; infill
 G1 X6.757 Y1.374 E1349.82052 ; infill
 G1 X6.757 Y8.426 E1350.03239 ; infill
 G1 X7.118 Y8.426 E1350.04324 ; infill
 G1 X7.118 Y0.694 E1350.27552 ; infill
 G1 X7.479 Y0.015 E1350.29865 ; infill
 G1 X7.479 Y8.426 E1350.55134 ; infill
 G1 X7.841 Y8.426 E1350.56220 ; infill
 G1 X7.841 Y-0.665 E1350.83531 ; infill
 G1 X8.202 Y-1.344 E1350.85843 ; infill
 G1 X8.202 Y8.426 E1351.15196 ; infill
 G1 X8.563 Y8.426 E1351.16281 ; infill
 G1 X8.563 Y-2.024 E1351.47676 ; infill
 G1 X8.925 Y-2.703 E1351.49988 ; infill
 G1 X8.925 Y8.426 E1351.83423 ; infill
 G1 X9.286 Y8.426 E1351.84509 ; infill
 G1 X9.286 Y-3.383 E1352.19986 ; infill
 G1 X9.647 Y-4.062 E1352.22298 ; infill
 G1 X9.647 Y8.426 E1352.59817 ; infill
 G1 X10.009 Y8.426 E1352.60903 ; infill
 G1 X10.009 Y-4.742 E1353.00463 ; infill
 G1 X10.370 Y-5.421 E1353.02775 ; infill
 G1 X10.370 Y8.426 E1353.44377 ; infill
 G1 X10.731 Y8.426 E1353.45462 ; infill
 G1 X10.731 Y-6.101 E1353.89106 ; infill
 G1 X11.093 Y-6.781 E1353.91418 ; infill
 G1 X11.093 Y8.426 E1354.37103 ; infill
 G1 X11.454 Y8.426 E1354.38188 ; infill
 G1 X11.454 Y-7.460 E1354.85915 ; infill
 G1 X11.815 Y-8.140 E1354.88227 ; infill
 G1 X11.815 Y8.426 E1355.37995 ; infill
 G1 X12.177 Y8.426 E1355.39080 ; infill
 G1 X12.177 Y-8.426 E1355.89708 ; infill
 G1 X12.538 Y-8.426 E1355.90794 ; infill
 G1 X12.538 Y8.426 E1356.41422 ; infill
 G1 X12.899 Y8.426 E1356.42507 ; infill
 G1 X12.899 Y-8.426 E1356.93135 ; infill
 G1 X13.260 Y-8.426 E1356.94221 ; infill
 G1 X13.260 Y8.426 E1357.44849 ; infill
 G1 X13.622 Y8.426 E1357.45934 ; infill
 G1 X13.622 Y-8.426 E1357.96562 ; infill
 G1 X13.983 Y-8.426 E1357.97648 ; infill
 G1 X13.983 Y8.426 E1358.48276 ; infill
 G1 X14.344 Y8.426 E1358.49361 ; infill
 G1 X14.344 Y-8.426 E1358.99990 ; infill
 G1 X14.706 Y-8.426 E1359.01075 ; infill
 G1 X14.706 Y8.426 E1359.51703 ; infill
 G1 X15.067 Y8.426 E1359.52789 ; infill
 G1 X15.067 Y-8.426 E1360.03417 ; infill
 G1 X15.428 Y-8.426 E1360.04502 ; infill
 G1 X15.428 Y8.426 E1360.55130 ; infill
 G1 X15.790 Y8.426 E1360.56216 ; infill
 G1 X15.790 Y-8.426 E1361.06844 ; infill
 G1 X16.151 Y-8.426 E1361.07929 ; infill
 G1 X16.151 Y8.426 E1361.58557 ; infill
 G1 X16.512 Y8.426 E1361.59643 ; infill
 G1 X16.512 Y-8.426 E1362.10271 ; infill
 G1 X16.874 Y-8.426 E1362.11356 ; infill
 G1 X16.874 Y8.426 E1362.61984 ; infill
 G1 X17.235 Y8.426 E1362.63070 ; infill
 G1 X17.235 Y-8.426 E1363.13698 ; infill
 G1 X17.596 Y-8.426 E1363.14783 ; infill
 G1 X17.596 Y8.426 E1363.65411 ; infill
 G1 X17.957 Y8.426 E1363.66497 ; infill
 G1 X17.957 Y-8.426 E1364.17125 ; infill
 G1 X18.319 Y-8.426 E1364.18210 ; infill
 G1 X18.319 Y8.426 E1364.68839 ; infill
 G1 F5760
 G1 X18.319 Y2.026 E1362.78839 ; retract
 G1 E1362.68839 F1800.00000 ; retract
 G1 X-11.709 Y8.786 F7200.000 ; move to first perimeter point
 G1 E1364.68839 F1800.00000 ; unretract
 G1 X-18.786 Y8.786 E1365.01617 F2293.786 ; perimeter
 G1 X-18.786 Y-8.786 E1365.83012 ; perimeter
 G1 X-2.366 Y-8.786 E1366.59069 ; perimeter
 G1 X-11.681 Y8.733 E1367.50976 ; perimeter
 G1 X-11.375 Y9.343 F7200.000 ; move to first perimeter point
 G1 X-19.343 Y9.343 E1367.87885 F2293.786 ; perimeter
 G1 X-19.343 Y-9.343 E1368.74441 ; perimeter
 G1 X-1.439 Y-9.343 E1369.57373 ; perimeter
 G1 X-11.347 Y9.290 E1370.55125 ; perimeter
 G1 X-11.100 Y9.800 F7200.000 ; move to first perimeter point
 G1 X-19.800 Y9.800 E1370.80956 F1529.191 ; perimeter
 G1 X-19.800 Y-9.800 E1371.39151 ; perimeter
 G1 X-0.679 Y-9.800 E1371.95925 ; perimeter
 G1 X-11.072 Y9.747 E1372.61656 ; perimeter
 G1 X-11.409 Y9.546 F7200.000 ; move inwards before travel
 G1 F5760
 G1 X-17.472 Y9.786 E1370.71656 ; retract
 G1 E1370.61656 F1800.00000 ; retract
 G1 X-18.319 Y-8.426 F7200.000 ; move to first infill point
 G1 E1372.61656 F1800.00000 ; unretract
 G1 X-18.319 Y8.426 E1373.12284 F2293.786 ; infill
 G1 X-17.958 Y8.426 E1373.13370 ; infill
 G1 X-17.958 Y-8.426 E1373.63998 ; infill
 G1 X-17.596 Y-8.426 E1373.65083 ; infill
 G1 X-17.596 Y8.426 E1374.15711 ; infill
 G1 X-17.235 Y8.426 E1374.16797 ; infill
 G1 X-17.235 Y-8.426 E1374.67425 ; infill
 G1 X-16.874 Y-8.426 E1374.68510 ; infill
 G1 X-16.874 Y8.426 E1375.19139 ; infill
 G1 X-16.512 Y8.426 E1375.20224 ; infill
 G1 X-16.512 Y-8.426 E1375.70852 ; infill
 G1 X-16.151 Y-8.426 E1375.71938 ; infill
 G1 X-16.151 Y8.426 E1376.22566 ; infill
 G1 X-15.790 Y8.426 E1376.23651 ; infill
 G1 X-15.790 Y-8.426 E1376.74279 ; infill
 G1 X-15.428 Y-8.426 E1376.75365 ; infill
 G1 X-15.428 Y8.426 E1377.25993 ; infill
 G1 X-15.067 Y8.426 E1377.27078 ; infill
 G1 X-15.067 Y-8.426 E1377.77706 ; infill
 G1 X-14.706 Y-8.426 E1377.78792 ; infill
 G1 X-14.706 Y8.426 E1378.29420 ; infill
 G1 X-14.344 Y8.426 E1378.30505 ; infill
 G1 X-14.344 Y-8.426 E1378.81133 ; infill
 G1 X-13.983 Y-8.426 E1378.82219 ; infill
 G1 X-13.983 Y8.426 E1379.32847 ; infill
 G1 X-13.622 Y8.426 E1379.33932 ; infill
 G1 X-13.622 Y-8.426 E1379.84560 ; infill
 G1 X-13.260 Y-8.426 E1379.85646 ; infill
 G1 X-13.260 Y8.426 E1380.36274 ; infill
 G1 X-12.899 Y8.426 E1380.37359 ; infill
 G1 X-12.899 Y-8.426 E1380.87988 ; infill
 G1 X-12.538 Y-8.426 E1380.89073 ; infill
 G1 X-12.538 Y8.426 E1381.39701 ; infill
 G1 X-12.177 Y8.426 E1381.40787 ; infill
 G1 X-12.177 Y-8.426 E1381.91415 ; infill
 G1 X-11.815 Y-8.426 E1381.92500 ; infill
 G1 X-11.815 Y8.140 E1382.42268 ; infill
 G1 X-11.454 Y7.460 E1382.44580 ; infill
 G1 X-11.454 Y-8.426 E1382.92307 ; infill
 G1 X-11.093 Y-8.426 E1382.93392 ; infill
 G1 X-11.093 Y6.781 E1383.39077 ; infill
 G1 X-10.731 Y6.101 E1383.41389 ; infill
 G1 X-10.731 Y-8.426 E1383.85033 ; infill
 G1 X-10.370 Y-8.426 E1383.86118 ; infill
 G1 X-10.370 Y5.422 E1384.27720 ; infill
 G1 X-10.009 Y4.742 E1384.30033 ; infill
 G1 X-10.009 Y-8.426 E1384.69593 ; infill
 G1 X-9.647 Y-8.426 E1384.70679 ; infill
 G1 X-9.647 Y4.062 E1385.08197 ; infill
 G1 X-9.286 Y3.383 E1385.10510 ; infill
 G1 X-9.286 Y-8.426 E1385.45987 ; infill
 G1 X-8.925 Y-8.426 E1385.47073 ; infill
 G1 X-8.925 Y2.703 E1385.80508 ; infill
 G1 X-8.563 Y2.024 E1385.82821 ; infill
 G1 X-8.563 Y-8.426 E1386.14215 ; infill
 G1 X-8.202 Y-8.426 E1386.15300 ; infill
 G1 X-8.202 Y1.344 E1386.44653 ; infill
 G1 X-7.841 Y0.665 E1386.46965 ; infill
 G1 X-7.841 Y-8.426 E1386.74277 ; infill
 G1 X-7.479 Y-8.426 E1386.75362 ; infill
 G1 X-7.479 Y-0.015 E1387.00632 ; infill
 G1 X-7.118 Y-0.694 E1387.02944 ; infill
 G1 X-7.118 Y-8.426 E1387.26173 ; infill
 G1 X-6.757 Y-8.426 E1387.27258 ; infill
 G1 X-6.757 Y-1.374 E1387.48445 ; infill
 G1 X-6.396 Y-2.053 E1387.50757 ; infill
 G1 X-6.396 Y-8.426 E1387.69902 ; infill
 G1 X-6.034 Y-8.426 E1387.70988 ; infill
 G1 X-6.034 Y-2.733 E1387.88092 ; infill
 G1 X-5.673 Y-3.412 E1387.90404 ; infill
 G1 X-5.673 Y-8.426 E1388.05466 ; infill
 G1 X-5.312 Y-8.426 E1388.06552 ; infill
 G1 X-5.312 Y-4.092 E1388.19572 ; infill
 G1 X-4.950 Y-4.771 E1388.21885 ; infill
 G1 X-4.950 Y-8.426 E1388.32864 ; infill
 G1 X-4.589 Y-8.426 E1388.33949 ; infill
 G1 X-4.589 Y-5.451 E1388.42887 ; infill
 G1 X-4.228 Y-6.130 E1388.45199 ; infill
 G1 X-4.228 Y-8.426 E1388.52095 ; infill
 G1 X-3.866 Y-8.426 E1388.53181 ; infill
 G1 X-3.866 Y-6.810 E1388.58036 ; infill
 G1 X-3.505 Y-7.490 E1388.60348 ; infill
 G1 X-3.505 Y-8.426 E1388.63161 ; infill
 G1 X-3.144 Y-8.426 E1388.64246 ; infill
 G1 X-3.144 Y-8.169 E1388.65018 ; infill
 G1 F5760
 G1 X-3.144 Y-8.426 E1388.57393 ; retract;_WIPE
 G1 F5760
 G1 X-3.505 Y-8.426 E1388.46666 ; retract;_WIPE
 G1 F5760
 G1 X-3.505 Y-7.490 E1388.18868 ; retract;_WIPE
 G1 F5760
 G1 X-3.866 Y-6.810 E1387.96020 ; retract;_WIPE
 G1 F5760
 G1 X-3.866 Y-8.426 E1387.48047 ; retract;_WIPE
 G1 F5760
 G1 X-4.228 Y-8.426 E1387.37321 ; retract;_WIPE
 G1 F5760
 G1 X-4.228 Y-6.327 E1386.75018 ; retract;_WIPE
 G1 E1386.65018 F1800.00000 ; retract
 M127 ; disable fan
 M73 P100 ; end build progress
 G162 X Y F2500; home X and Y axes
 M18; disable all stepper motors
 M109 S0; set bed temperature to 0
 M104 S0 T1; set extruder temperature to 0
 M70 P5; Display "We <3 Making Things!" message
 M72 P1; Play Ta-Da song
 M73 P100 ; update progress
 ; filament used = 1388.7mm (3.3cm3)

 ; avoid_crossing_perimeters = 0
 ; bed_shape = -112.5x-72.5,112.5x-72.5,112.5x72.5,-112.5x72.5
 ; bed_temperature = 55
 ; before_layer_gcode = 
 ; bridge_acceleration = 0
 ; bridge_fan_speed = 100
 ; brim_width = 0
 ; complete_objects = 0
 ; cooling = 1
 ; default_acceleration = 0
 ; disable_fan_first_layers = 1
 ; duplicate_distance = 6
 ; end_gcode = M73 P100 ; end build progress\nG162 X Y F2500; home X and Y axes\nM18; disable all stepper motors\nM109 S0; set bed temperature to 0\nM104 S0 T1; set extruder temperature to 0\nM70 P5; Display "We <3 Making Things!" message\nM72 P1; Play Ta-Da song
 ; extruder_clearance_height = 20
 ; extruder_clearance_radius = 20
 ; extruder_offset = 0x0
 ; extrusion_axis = E
 ; extrusion_multiplier = 1
 ; fan_always_on = 0
 ; fan_below_layer_time = 60
 ; filament_diameter = 1.75
 ; first_layer_acceleration = 0
 ; first_layer_bed_temperature = 55
 ; first_layer_extrusion_width = 1
 ; first_layer_speed = 20
 ; first_layer_temperature = 195
 ; gcode_arcs = 0
 ; gcode_comments = 1
 ; gcode_flavor = sailfish
 ; infill_acceleration = 0
 ; infill_first = 0
 ; layer_gcode = 
 ; max_fan_speed = 100
 ; min_fan_speed = 35
 ; min_print_speed = 5
 ; min_skirt_length = 0
 ; notes = 
 ; nozzle_diameter = 0.4
 ; only_retract_when_crossing_perimeters = 1
 ; ooze_prevention = 1
 ; output_filename_format = [input_filename_base].gcode
 ; perimeter_acceleration = 0
 ; post_process = 
 ; pressure_advance = 0
 ; resolution = 0
 ; retract_before_travel = 2
 ; retract_layer_change = 1
 ; retract_length = 2
 ; retract_length_toolchange = 10
 ; retract_lift = 0
 ; retract_restart_extra = 0
 ; retract_restart_extra_toolchange = 0
 ; retract_speed = 30
 ; skirt_distance = 6
 ; skirt_height = 1
 ; skirts = 1
 ; slowdown_below_layer_time = 40
 ; spiral_vase = 0
 ; standby_temperature_delta = -5
 ; start_gcode = M135 T1; set primary extruder\nM73 P0; enable show build progress\nM109 S[first_layer_bed_temperature] ; heat bed up to first layer temperature\nM104 S[first_layer_temperature_0] T1; set nozzle heater to first layer temperature\nM103; disable RPM\nG21; set units to mm\nG162 X Y F6000; home XY axes maximum\nG161 Z F9000; home Z axis minimum\nG92 Z0; set Z to 0\nM132 X Y Z A B; Recall stored home offsets\nG90; set positioning to absolute\nG1 Z30; move Z to waiting height\nG1 X-95 Y-73 Z30 F14000; move to waiting position (front left corner of print bed)\nG130 X0 Y0 A0 B0; set stepper motor vref to lower value while heating\nM6 T1; wait for bed and extruder to heat up\nG130 X127 Y127 A0 B100; set stepper motor vref to defaults\nM108 T1 R3; set extruder speed\nG92 E0; set E to 0\nG90; use absolute coordinates\nM320; acceleration enabled for all commands that follow\nG1 Z[first_layer_height] F6000.000; move to first layer height\nG1 X100 Y-73 F14000.000; move to front right corner of bed\nG1 X-90 Y-73 E24 F2000.000; extrude a line of filament across the front edge of the bed\nG4 P2000; wait for ooze to slow\nG1 Z0 F6000.000; lower nozzle height to 0\nG1 X-95; wipe nozzle\nG1 Z[first_layer_height] F6000.000; set nozzle to first layer height\nG1 F12000; ensure fast travel to first print move\nG92 E0; set E to 0 again\nM73 P0; reset build progress to 0
 ; temperature = 195
 ; threads = 4
 ; toolchange_gcode = 
 ; travel_speed = 120
 ; use_firmware_retraction = 0
 ; use_relative_e_distances = 0
 ; use_volumetric_e = 0
 ; vibration_limit = 0
 ; wipe = 1
 ; z_offset = 0
 ; dont_support_bridges = 1
 ; extrusion_width = 0.6
 ; first_layer_height = 0.3
 ; infill_only_where_needed = 0
 ; interface_shells = 0
 ; layer_height = 0.2
 ; raft_layers = 0
 ; seam_position = aligned
 ; support_material = 1
 ; support_material_angle = 0
 ; support_material_contact_distance = 0.2
 ; support_material_enforce_layers = 0
 ; support_material_extruder = 1
 ; support_material_extrusion_width = 1
 ; support_material_interface_extruder = 1
 ; support_material_interface_layers = 10
 ; support_material_interface_spacing = 0
 ; support_material_interface_speed = 100%
 ; support_material_pattern = rectilinear
 ; support_material_spacing = 2
 ; support_material_speed = 10
 ; support_material_threshold = 0
 ; xy_size_compensation = 0
 ; bottom_solid_layers = 3
 ; bridge_flow_ratio = 1
 ; bridge_speed = 28
 ; external_fill_pattern = rectilinear
 ; external_perimeter_extrusion_width = 0.4
 ; external_perimeter_speed = 40
 ; external_perimeters_first = 0
 ; extra_perimeters = 1
 ; fill_angle = 0
 ; fill_density = 10%
 ; fill_pattern = line
 ; gap_fill_speed = 20
 ; infill_every_layers = 2
 ; infill_extruder = 1
 ; infill_extrusion_width = 0
 ; infill_overlap = 15%
 ; infill_speed = 200
 ; overhangs = 1
 ; perimeter_extruder = 1
 ; perimeter_extrusion_width = 0
 ; perimeter_speed = 60
 ; perimeters = 3
 ; small_perimeter_speed = 20
 ; solid_infill_below_area = 70
 ; solid_infill_every_layers = 0
 ; solid_infill_extruder = 1
 ; solid_infill_extrusion_width = 0
 ; solid_infill_speed = 200
 ; thin_walls = 1
 ; top_infill_extrusion_width = 0.4
 ; top_solid_infill_speed = 60
 ; top_solid_layers = 3
No results found