iampaulidrobo

void setup() {
  // initialize digital pin 13 as an output.node mcu pin d7
  pinMode(13, OUTPUT);
}

// the loop function runs over and over again forever
void loop() {
  digitalWrite(13, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(1000);              // wait for a second
  digitalWrite(13, LOW);    // turn the LED off by making the voltage LOW

iampaulidrobo

//Code by Piyush tailor

#include <ESP8266WiFi.h>
 
const char* ssid = "Baaa";
const char* password = "naaaaaaa";
 
int ledPin = 13; // GPIO13
WiFiServer server(80);
 

iampaulidrobo

//Code by PIYUSH TAILOR
#include "config.h"

float tempC;
int reading;
int tempPin = 0;


/************************ Example Starts Here *******************************/

iampaulidrobo

//Code by Piyush Tailor
#include "config.h"

/************************ Example Starts Here *******************************/

// this should correspond to a pin with PWM capability
#define Motor_sense 13

// set up the 'analog' feed
AdafruitIO_Feed *Motor = io.feed("Motor");

iampaulidrobo

// Code by Piyush Tailor
#include "config.h"

/************************ Example Starts Here *******************************/

// this should correspond to a pin with PWM capability
#define LED_PIN 5

// set up the 'analog' feed
AdafruitIO_Feed *analog = io.feed("analog");

iampaulidrobo

Code by Piyush Tailor
#include "config.h"

/************************ Example Starts Here *******************************/

// digital pin 5
#define LED_PIN 13

// set up the 'digital' feed
AdafruitIO_Feed *LED1 = io.feed("LED1");

iampaulidrobo

Code by Piyush Tailor
#include "config.h"

/************************ Example Starts Here *******************************/

// digital pin 5
#define LED_PIN 13

// set up the 'digital' feed
AdafruitIO_Feed *LED1 = io.feed("LED1");

iampaulidrobo

//Code by Piyush Tailor

#include <ESP8266WiFi.h>;
#include <WiFiClient.h>;
#include <ThingSpeak.h>;
const char* ssid = "Baaa";
const char* password = "naaaaaaa";
int val;
int tempPin = A0;