idreamsi · February 7, 2019 07:46
diff --git a/ESP8266-SoftAP-WebServer.ino b/ESP8266-SoftAP-WebServer.ino
 /* Create a WiFi access point and provide a web server on it. */

 #include <ESP8266WiFi.h>
 #include <ESP8266WebServer.h>

 IPAddress    apIP(42, 42, 42, 42);  // Defining a static IP address: local & gateway
                                    // Default IP in AP mode is 192.168.4.1

 /* This are the WiFi access point settings. Update them to your likin */
 const char *ssid = "ESP8266";
 const char *password = "ESP8266Test";

 // Define a web server at port 80 for HTTP
 ESP8266WebServer server(80);

 const int ledPin = D1; // an LED is connected to NodeMCU pin D1 (ESP8266 GPIO5) via a 1K Ohm resistor

 bool ledState = false;

 void handleRoot() {
  digitalWrite (LED_BUILTIN, 0); //turn the built in LED on pin DO of NodeMCU on
  digitalWrite (ledPin, server.arg("led").toInt());
  ledState = digitalRead(ledPin);

 /* Dynamically generate the LED toggle link, based on its current state (on or off)*/
  char ledText[80];
  
  if (ledState) {
    strcpy(ledText, "LED is on. <a href=\"/?led=0\">Turn it OFF!</a>");
  }

  else {
    strcpy(ledText, "LED is OFF. <a href=\"/?led=1\">Turn it ON!</a>");
  }
 
  ledState = digitalRead(ledPin);

  char html[1000];
  int sec = millis() / 1000;
  int min = sec / 60;
  int hr = min / 60;

  int brightness = analogRead(A0);
  brightness = (int)(brightness + 5) / 10; //converting the 0-1024 value to a (approximately) percentage value

 // Build an HTML page to display on the web-server root address
  snprintf ( html, 1000,

 "<html>\
  <head>\
    <meta http-equiv='refresh' content='10'/>\
    <title>ESP8266 WiFi Network</title>\
    <style>\
      body { background-color: #cccccc; font-family: Arial, Helvetica, Sans-Serif; font-size: 1.5em; Color: #000000; }\
      h1 { Color: #AA0000; }\
    </style>\
  </head>\
  <body>\
    <h1>ESP8266 Wi-Fi Access Point and Web Server Demo</h1>\
    <p>Uptime: %02d:%02d:%02d</p>\
    <p>Brightness: %d%</p>\
    <p>%s<p>\
    <p>This page refreshes every 10 seconds. Click <a href=\"javascript:window.location.reload();\">here</a> to refresh the page now.</p>\
  </body>\
 </html>",

    hr, min % 60, sec % 60,
    brightness,
    ledText
  );
  server.send ( 200, "text/html", html );
  digitalWrite ( LED_BUILTIN, 1 );
 }

 void handleNotFound() {
  digitalWrite ( LED_BUILTIN, 0 );
  String message = "File Not Found\n\n";
  message += "URI: ";
  message += server.uri();
  message += "\nMethod: ";
  message += ( server.method() == HTTP_GET ) ? "GET" : "POST";
  message += "\nArguments: ";
  message += server.args();
  message += "\n";

  for ( uint8_t i = 0; i < server.args(); i++ ) {
    message += " " + server.argName ( i ) + ": " + server.arg ( i ) + "\n";
  }

  server.send ( 404, "text/plain", message );
  digitalWrite ( LED_BUILTIN, 1 ); //turn the built in LED on pin DO of NodeMCU off
 }

 void setup() {
  pinMode ( ledPin, OUTPUT );
  digitalWrite ( ledPin, 0 );
 	
 	delay(1000);
 	Serial.begin(115200);
 	Serial.println();
 	Serial.println("Configuring access point...");

  //set-up the custom IP address
  WiFi.mode(WIFI_AP_STA);
  WiFi.softAPConfig(apIP, apIP, IPAddress(255, 255, 255, 0));   // subnet FF FF FF 00  
 	
 	/* You can remove the password parameter if you want the AP to be open. */
 	WiFi.softAP(ssid, password);

 	IPAddress myIP = WiFi.softAPIP();
 	Serial.print("AP IP address: ");
 	Serial.println(myIP);
 
  server.on ( "/", handleRoot );
  server.on ( "/led=1", handleRoot);
  server.on ( "/led=0", handleRoot);
  server.on ( "/inline", []() {
    server.send ( 200, "text/plain", "this works as well" );
  } );
  server.onNotFound ( handleNotFound );
 	
 	server.begin();
 	Serial.println("HTTP server started");
 }

 void loop() {
 	server.handleClient();
 }
	/* Create a WiFi access point and provide a web server on it. */

	#include <ESP8266WiFi.h>
	#include <ESP8266WebServer.h>

	IPAddress apIP(42, 42, 42, 42); // Defining a static IP address: local & gateway
	// Default IP in AP mode is 192.168.4.1

	/* This are the WiFi access point settings. Update them to your likin */
	const char *ssid = "ESP8266";
	const char *password = "ESP8266Test";

	// Define a web server at port 80 for HTTP
	ESP8266WebServer server(80);

	const int ledPin = D1; // an LED is connected to NodeMCU pin D1 (ESP8266 GPIO5) via a 1K Ohm resistor

	bool ledState = false;

	void handleRoot() {
	digitalWrite (LED_BUILTIN, 0); //turn the built in LED on pin DO of NodeMCU on
	digitalWrite (ledPin, server.arg("led").toInt());
	ledState = digitalRead(ledPin);

	/* Dynamically generate the LED toggle link, based on its current state (on or off)*/
	char ledText[80];

	if (ledState) {
	strcpy(ledText, "LED is on. <a href=\"/?led=0\">Turn it OFF!</a>");
	}

	else {
	strcpy(ledText, "LED is OFF. <a href=\"/?led=1\">Turn it ON!</a>");
	}

	ledState = digitalRead(ledPin);

	char html[1000];
	int sec = millis() / 1000;
	int min = sec / 60;
	int hr = min / 60;

	int brightness = analogRead(A0);
	brightness = (int)(brightness + 5) / 10; //converting the 0-1024 value to a (approximately) percentage value

	// Build an HTML page to display on the web-server root address
	snprintf ( html, 1000,

	"<html>\
	<head>\
	<meta http-equiv='refresh' content='10'/>\
	<title>ESP8266 WiFi Network</title>\
	<style>\
	body { background-color: #cccccc; font-family: Arial, Helvetica, Sans-Serif; font-size: 1.5em; Color: #000000; }\
	h1 { Color: #AA0000; }\
	</style>\
	</head>\
	<body>\
	<h1>ESP8266 Wi-Fi Access Point and Web Server Demo</h1>\
	<p>Uptime: %02d:%02d:%02d</p>\
	<p>Brightness: %d%</p>\
	<p>%s<p>\
	<p>This page refreshes every 10 seconds. Click <a href=\"javascript:window.location.reload();\">here</a> to refresh the page now.</p>\
	</body>\
	</html>",

	hr, min % 60, sec % 60,
	brightness,
	ledText
	);
	server.send ( 200, "text/html", html );
	digitalWrite ( LED_BUILTIN, 1 );
	}

	void handleNotFound() {
	digitalWrite ( LED_BUILTIN, 0 );
	String message = "File Not Found\n\n";
	message += "URI: ";
	message += server.uri();
	message += "\nMethod: ";
	message += ( server.method() == HTTP_GET ) ? "GET" : "POST";
	message += "\nArguments: ";
	message += server.args();
	message += "\n";

	for ( uint8_t i = 0; i < server.args(); i++ ) {
	message += " " + server.argName ( i ) + ": " + server.arg ( i ) + "\n";
	}

	server.send ( 404, "text/plain", message );
	digitalWrite ( LED_BUILTIN, 1 ); //turn the built in LED on pin DO of NodeMCU off
	}

	void setup() {
	pinMode ( ledPin, OUTPUT );
	digitalWrite ( ledPin, 0 );

	delay(1000);
	Serial.begin(115200);
	Serial.println();
	Serial.println("Configuring access point...");

	//set-up the custom IP address
	WiFi.mode(WIFI_AP_STA);
	WiFi.softAPConfig(apIP, apIP, IPAddress(255, 255, 255, 0)); // subnet FF FF FF 00

	/* You can remove the password parameter if you want the AP to be open. */
	WiFi.softAP(ssid, password);

	IPAddress myIP = WiFi.softAPIP();
	Serial.print("AP IP address: ");
	Serial.println(myIP);

	server.on ( "/", handleRoot );
	server.on ( "/led=1", handleRoot);
	server.on ( "/led=0", handleRoot);
	server.on ( "/inline", []() {
	server.send ( 200, "text/plain", "this works as well" );
	} );
	server.onNotFound ( handleNotFound );

	server.begin();
	Serial.println("HTTP server started");
	}

	void loop() {
	server.handleClient();
	}