hostapd config for Intel WiFi6 AX201 (5Ghz)

ax201-hostapd.conf

# Config for Intel WiFi6 AX201
ctrl_interface=/var/run/hostapd
ctrl_interface_group=0

logger_syslog=-1
logger_syslog_level=2
logger_stdout=-1
logger_stdout_level=1

ssid=AwesomeWifi
utf8_ssid=1

wpa_passphrase=1234567890

# use wpa2
wpa=2

# wpa-psk, wpa3 keys
wpa_key_mgmt=WPA-PSK WPA-PSK-SHA256 SAE

#wpa_pairwise=TKIP CCMP
rsn_pairwise=CCMP

# enable pre-authentication
rsn_preauth=1

# lowest supported 5Ghz channel in Finland
channel=149

country_code=FI
# advertise country code and regulatory info
ieee80211d=1

# DFS radar detection
ieee80211h=1

# spectrum management & enforce local power constraint
spectrum_mgmt_required=1
local_pwr_constraint=3

# use interface wlo1, br0 bridge to internet
interface=wlo1
bridge=br0

# default driver
driver=nl80211

# management frame protection (MFP) is enabled
ieee80211w=2

# a = 5ghz
hw_mode=a

# HT enabled
ieee80211n=1
ht_capab=[HT40+][LDPC][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][DSSS_CCK-40][MAX-AMSDU-7935]

# enable VHT
ieee80211ac=1
# VHT channel width (1 for best compatibility)
vht_oper_chwidth=1
# freq sequence index (magic value, channel+6 or something)
vht_oper_centr_freq_seg0_idx=155
# vht capabilities (consult iw info)
vht_capab=[MAX-MPDU-11454][VHT160][RXLDPC][SHORT-GI-80][SHORT-GI-160][TX-STBC-2BY1][RX-STBC-1][SU-BEAMFORMEE][MU-BEAMFORMEE]

# enable WMM
wmm_enabled=1

# mostly default values for these
rts_threshold=-1
fragm_threshold=-1

beacon_int=100
dtim_period=2
max_num_sta=255

# isolate clients
ap_isolate=1

Hello The patch doesn't enable 6ghz or any other bands itself. Only forces Intel drives to recognise the country so that it allows the right bands. So maybe it works for your use, I haven't test it Sent from Proton Mail Android

…

-------- Original Message --------

On 17/08/2024 22:42, vidalinux wrote: @vidalinux commented on this gist. --------------------------------------------------------------- Hello, this patch works for 6ghz ? — Reply to this email directly, [view it on GitHub](https://gist.github.com/iffa/290b1b83b17f51355c63a97df7c1cc60#gistcomment-5157825) or [unsubscribe](https://github.com/notifications/unsubscribe-auth/ATM5M3SCYYXK7NDKE2BSYB3ZR67U7BFKMF2HI4TJMJ2XIZLTSKBKK5TBNR2WLJDUOJ2WLJDOMFWWLO3UNBZGKYLEL5YGC4TUNFRWS4DBNZ2F6YLDORUXM2LUPGBKK5TBNR2WLJDHNFZXJJDOMFWWLK3UNBZGKYLEL52HS4DFVRZXKYTKMVRXIX3UPFYGLK2HNFZXIQ3PNVWWK3TUUZ2G64DJMNZZDAVEOR4XAZNEM5UXG5FFOZQWY5LFVEYTAOJYGI3TMMZQU52HE2LHM5SXFJTDOJSWC5DF). You are receiving this email because you commented on the thread. Triage notifications on the go with GitHub Mobile for [iOS](https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675) or [Android](https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub).