boot log from SD boot

gistfile1.txt

U-Boot SPL 2021.10 (Dec 19 2022 - 17:24:44 +0800)
DDR version: dc2e84f0.
Trying to boot from SPI

OpenSBI v1.0
   ____                    _____ ____ _____
  / __ \                  / ____|  _ \_   _|
 | |  | |_ __   ___ _ __ | (___ | |_) || |
 | |  | | '_ \ / _ \ '_ \ \___ \|  _ < | |
 | |__| | |_) |  __/ | | |____) | |_) || |_
  \____/| .__/ \___|_| |_|_____/|____/_____|
        | |
        |_|

Platform Name             : StarFive VisionFive V2
Platform Features         : medeleg
Platform HART Count       : 5
Platform IPI Device       : aclint-mswi
Platform Timer Device     : aclint-mtimer @ 4000000Hz
Platform Console Device   : uart8250
Platform HSM Device       : ---
Platform Reboot Device    : ---
Platform Shutdown Device  : ---
Firmware Base             : 0x40000000
Firmware Size             : 360 KB
Runtime SBI Version       : 0.3

Domain0 Name              : root
Domain0 Boot HART         : 2
Domain0 HARTs             : 0*,1*,2*,3*,4*
Domain0 Region00          : 0x0000000002000000-0x000000000200ffff (I)
Domain0 Region01          : 0x0000000040000000-0x000000004007ffff ()
Domain0 Region02          : 0x0000000000000000-0xffffffffffffffff (R,W,X)
Domain0 Next Address      : 0x0000000040200000
Domain0 Next Arg1         : 0x0000000042200000
Domain0 Next Mode         : S-mode
Domain0 SysReset          : yes

Boot HART ID              : 2
Boot HART Domain          : root
Boot HART Priv Version    : v1.11
Boot HART Base ISA        : rv64imafdcbx
Boot HART ISA Extensions  : none
Boot HART PMP Count       : 8
Boot HART PMP Granularity : 4096
Boot HART PMP Address Bits: 34
Boot HART MHPM Count      : 2
Boot HART MIDELEG         : 0x0000000000000222
Boot HART MEDELEG         : 0x000000000000b109


U-Boot 2021.10 (Dec 19 2022 - 17:24:44 +0800)

CPU:   rv64imacu
Model: StarFive VisionFive V2
DRAM:  8 GiB
MMC:   sdio0@16010000: 0, sdio1@16020000: 1
Loading Environment from SPIFlash... SF: Detected gd25lq128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
*** Warning - bad CRC, using default environment

StarFive EEPROM format v2

--------EEPROM INFO--------
Vendor : StarFive Technology Co., Ltd.
Product full SN: VF7110B1-2253-D008E000-00002522
data version: 0x2
PCB revision: 0xb2
BOM revision: A
Ethernet MAC0 address: 6c:cf:39:00:35:7d
Ethernet MAC1 address: 6c:cf:39:00:35:7e
--------EEPROM INFO--------

In:    serial@10000000
Out:   serial@10000000
Err:   serial@10000000
Model: StarFive VisionFive V2
Net:   eth0: ethernet@16030000, eth1: ethernet@16040000
switch to partitions #0, OK
mmc1 is current device
found device 1
bootmode flash device 1
** Invalid partition 3 **
Couldn't find partition mmc 1:3
Can't set block device
** Invalid partition 3 **
Couldn't find partition mmc 1:3
Can't set block device
Hit any key to stop autoboot:  0
** Invalid partition 3 **
Couldn't find partition mmc 1:3
Can't set block device
Importing environment from mmc1 ...
## Warning: Input data exceeds 1048576 bytes - truncated
## Info: input data size = 1048578 = 0x100002
Can't set block device
## Warning: defaulting to text format
## Error: "boot2" not defined
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
371 bytes read in 2 ms (180.7 KiB/s)
1:      Alpine Linux
Retrieving file: /initramfs-starfive
4477182 bytes read in 190 ms (22.5 MiB/s)
Retrieving file: /vmlinuz-starfive
5625354 bytes read in 237 ms (22.6 MiB/s)
append: earlycon=sbi rw root=UUID=03955e49-5703-4c38-86bf-95bc72437b4c rootfstype=ext4 rootwait console=ttyS0,115200 console=tty0 stmmaceth=chain_mode:1
Retrieving file: /dtbs-starfive/starfive/jh7110-starfive-visionfive-2-v1.3b.dtb
18073 bytes read in 5 ms (3.4 MiB/s)
kernel_comp_addr_r or kernel_comp_size is not provided!
SCRIPT FAILED: continuing...
Found /boot/extlinux/extlinux.conf
Retrieving file: /boot/extlinux/extlinux.conf
371 bytes read in 2 ms (180.7 KiB/s)
1:      Alpine Linux
Retrieving file: /initramfs-starfive
4477182 bytes read in 190 ms (22.5 MiB/s)
Retrieving file: /vmlinuz-starfive
5625354 bytes read in 237 ms (22.6 MiB/s)
append: earlycon=sbi rw root=UUID=03955e49-5703-4c38-86bf-95bc72437b4c rootfstype=ext4 rootwait console=ttyS0,115200 console=tty0 stmmaceth=chain_mode:1
Retrieving file: /dtbs-starfive/starfive/jh7110-starfive-visionfive-2-v1.3b.dtb
18073 bytes read in 5 ms (3.4 MiB/s)
kernel_comp_addr_r or kernel_comp_size is not provided!
SCRIPT FAILED: continuing...
Card did not respond to voltage select! : -110
No EFI system partition
ethernet@16030000 Waiting for PHY auto negotiation to complete....... done
BOOTP broadcast 1
BOOTP broadcast 2
DHCP client bound to address 192.168.1.120 (265 ms)
*** ERROR: `serverip' not set
Cannot autoload with TFTPGET
BOOTP broadcast 1
DHCP client bound to address 192.168.1.120 (6 ms)
*** ERROR: `serverip' not set
Cannot autoload with TFTPGET
StarFive #