initlab 3d printer settings

.pronsolerc

# Sample .pronsolerc file - copy this into your home directory
macro up G1 Z6 F200
macro printnow !self.p.send_now("M23 [0]")
macro printme
	G21
	G90
	move z 6
	home
	move z 6
	M109 {0}
	
macro loud !self.p.loud = 1
macro quiet !self.p.loud = 0

set last_file_path /tmp
set xy_feedrate 12000
set z_feedrate 300
set e_feedrate 30
set port /dev/ttyUSB0
set last_bed_temperature 80.0
set last_temperature 190.0
set temperature_abs 240
set temperature_pla 210
set bedtemp_pla 56
set bedtemp_abs 110
set baudrate 115200
set preview_extrusion_width 0.5
set build_dimensions 190.00x152.00x90.00+0.00+0.00+0.00+0.00+0.00+0.00
set sliceoptscommand /usr/bin/vendor_perl/slic3r.pl
set slicecommand /usr/bin/vendor_perl/slic3r.pl $s --output $o
set sliceconfig
set clearNext 1

button 0 "INIT SD" /c "#C8C8C8" M21
button 1 "EJECT" /c "#C8C8C8" M22
button 2 "LIST" /c "#C8C8C8" M20
button 3 "GET POS" /c "#C8C8C8" M114
button 4 "FAN OFF" /c "D1FFCC" fan
button 5 "ECHO" /c "#C8C8C8" loud
button 6 "QUIET" /c "#C8C8C8" quiet
button 7 "65,17" G1 X65 Y17 F12000
button 8 "CENTRE" G1 X100 Y100 F12000
button 9 "BR" G1 X55 Y8 F12000
button 10 "FL" G1 X200 Y200 F30000
button 11 "UP1.5" G1 Z1.5 F300
button 12 "    FR    " G1 X15 Y200 F12000
macro fan
  !global _fan
  !if '_fan' in globals() and _fan:
    !_fan = 0
    M107
    !if hasattr(self,"cur_button") and self.cur_button is not None: 
      !self.onecmd('button %d "FAN OFF" /c "D1FFCC" fan' % self.cur_button)
  !else:
    !_fan = 1
    M106
    !if hasattr(self,"cur_button") and self.cur_button is not None: 
      !self.onecmd('button %d "FAN ON)" /c red fan' % self.cur_button)

set preview_grid_step1 10
set preview_grid_step2 50
button 13 "M503" M503
button 14 "G31" G31
macro calibrate
  G1 X50 Y20 F12000
  G28 Z0
  G32
  G1 X50 Y20 F12000
button 15 "g32" G32
set last_window_maximized True
set last_window_width 800
set last_window_height 774
set last_sash_position 1014
set extruders 1
set last_file_filter 3
set total_filament_used 32485.7908292
set slic3rintegration True
set tempgauges True
set last_extrusion 10
set clamp_jogging True
set trackcurrentlayer3d True

ignisf-slic3r-bundle.ini

# generated by Slic3r 1.3.1-dev on Mon Jul 30 12:25:44 2018

[filament:ABS]
bed_temperature = 100
bridge_fan_speed = 100
compatible_printers = 
cooling = 1
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 20
filament_colour = #FFFFFF
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_max_volumetric_speed = 0
filament_notes = ""
filament_settings_id = 
first_layer_bed_temperature = 100
first_layer_temperature = 0
max_fan_speed = 100
min_fan_speed = 0
min_print_speed = 10
slowdown_below_layer_time = 20
start_filament_gcode = "; Filament gcode\n"
temperature = 0

[filament:PLA]
bed_temperature = 80
bridge_fan_speed = 100
compatible_printers = 
cooling = 1
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 60
filament_colour = #FFFFFF
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_max_volumetric_speed = 0
filament_notes = ""
filament_settings_id = 
first_layer_bed_temperature = 80
first_layer_temperature = 195
max_fan_speed = 100
min_fan_speed = 100
min_print_speed = 2
slowdown_below_layer_time = 60
start_filament_gcode = "; Filament gcode\n"
temperature = 195

[filament:ignisf-black]
bed_temperature = 60
bridge_fan_speed = 100
compatible_printers = 
cooling = 1
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 60
filament_colour = #000000
filament_cost = 44.655
filament_density = 0
filament_diameter = 1.75
filament_max_volumetric_speed = 0
filament_notes = ""
filament_settings_id = 
first_layer_bed_temperature = 80
first_layer_temperature = 210
max_fan_speed = 100
min_fan_speed = 35
min_print_speed = 10
slowdown_below_layer_time = 5
start_filament_gcode = "; Filament gcode\n"
temperature = 190

[presets]
filament = ignisf-black
filament_1 = PLA
print = ignisf-black
printer = ignisf-black

[print:ignisf-black]
adaptive_slicing = 0
adaptive_slicing_quality = 75%
avoid_crossing_perimeters = 0
bottom_infill_pattern = rectilinear
bottom_solid_layers = 2
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 40
brim_connections_width = 3
brim_width = 3
compatible_printers = 
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_perimeter_extrusion_width = 0
external_perimeter_speed = 50%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0
fill_angle = 45
fill_density = 20%
fill_gaps = 1
fill_pattern = gyroid
first_layer_acceleration = 0
first_layer_extrusion_width = 200%
first_layer_height = 0.35
first_layer_speed = 15
gap_fill_speed = 20
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 55%
infill_speed = 40
interface_shells = 0
interior_brim_width = 0
label_printed_objects = 0
layer_height = 0.3
match_horizontal_surfaces = 0
max_print_speed = 80
max_volumetric_speed = 0
min_shell_thickness = 0
min_skirt_length = 0
min_top_bottom_shell_thickness = 0
notes = 
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 40
perimeters = 2
post_process = 
print_settings_id = 
raft_layers = 0
regions_overlap = 0
resolution = 0
seam_position = aligned
shortcuts = support_material
skirt_distance = 6
skirt_height = 1
skirts = 2
small_perimeter_speed = 15
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0
solid_infill_speed = 20
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_buildplate_only = 0
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_extrusion_width = 0
support_material_interface_layers = 3
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_max_layers = 0
support_material_pattern = pillars
support_material_pillar_size = 2.5
support_material_pillar_spacing = 10
support_material_spacing = 2.5
support_material_speed = 40
support_material_threshold = 60
thin_walls = 1
top_infill_extrusion_width = 0
top_infill_pattern = rectilinear
top_solid_infill_speed = 15
top_solid_layers = 2
travel_speed = 130
xy_size_compensation = 0

[printer:ignisf-black]
bed_shape = 0x0,192x0,192x150,0x150
before_layer_gcode = 
between_objects_gcode = 
end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\n
extruder_offset = 0x0
gcode_flavor = reprap
has_heatbed = 1
host_type = octoprint
layer_gcode = 
max_layer_height = 0.3
min_layer_height = 0.15
nozzle_diameter = 0.5
octoprint_apikey = 
pressure_advance = 0
print_host = 
printer_notes = 
printer_settings_id = 
retract_before_travel = 2
retract_layer_change = 1
retract_length = 3
retract_length_toolchange = 10
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 80
serial_port = /dev/ttyUSB0
serial_speed = 115200
start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 0
use_set_and_wait_bed = 0
use_set_and_wait_extruder = 0
use_volumetric_e = 0
vibration_limit = 0
wipe = 0
z_offset = 0
z_steps_per_mm = 0

[settings]
autocenter = 1