ilyasst

Run freqtrade on your VM

---

Important

TA-lib requires 2Gb of RAM. You can either:

1. Upgrade your VM to a 2Gb RAM VM
2. Use this guide to create a SWAP file (virtual memory) on the VM's SSD that is at least 2Gb: https://www.vultr.com/docs/setup-swap-file-on-linux

ilyasst

Run a python script forever

In this section, we are going to show how to run a python script as a systemd service, allowing you to boot it at the start of a Linux machine and to maintain it alive.

Test method: Telegram Bot

We are going to use a very basic Telegram bot in order to test that our script will:

1. Automatically start when the machine boot
2. Automatically restart when it crashes/exits for whichever reason

ilyasst

"""
This script is heavily inspired by the example provided by the developers of Arcas:
https://github.com/ArcasProject/ArcasExamples/blob/initial_commits/scripts/scraping_num_articles.py
"""
import arcas
import pandas as pd
import matplotlib.pyplot as plt

keywords = ["composite", "carbon", "fiber"]
num_collect = 10

ilyasst

Run freqtrade on Raspberry Pi

Seupt your Dietpi. Static IP. SSH.

Freqtrade v2019.9 with Python 3.7 and setup.sh

Python 3.7:

 sudo apt-get install build-essential tk-dev libncurses5-dev libncursesw5-dev libreadline6-dev libdb5.3-dev libgdbm-dev libsqlite3-dev libssl-dev libbz2-dev libexpat1-dev liblzma-dev zlib1g-dev libffi-dev -y

ilyasst

sudo apt-get install build-essential tk-dev libncurses5-dev libncursesw5-dev libreadline6-dev libdb5.3-dev libgdbm-dev libsqlite3-dev libssl-dev libbz2-dev libexpat1-dev liblzma-dev zlib1g-dev libffi-dev -y
wget https://www.python.org/ftp/python/3.7.2/Python-3.7.2.tar.xz
tar xf Python-3.7.2.tar.xz
cd Python-3.7.2
./configure
make -j 4
sudo make altinstall
cd ..
sudo apt-get install libffi-dev git libatlas-base-dev
git clone https://github.com/freqtrade/freqtrade.git

ilyasst

from dolfin import *
from mshr import *
import numpy as np
import matplotlib.pyplot as plt


# https://comet-fenics.readthedocs.io/en/latest/demo/thermoelasticity/thermoelasticity_transient.html#References

L = 1.
R = 0.4

ilyasst

$ VBoxManage import ./UCS-Virtualbox-Demo-Image.ova --vsys 0 --eula accept
0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100% 
Interpreting /home/crohr/dev/ucs/./UCS-Virtualbox-Demo-Image.ova...
OK. 
Disks: vmdisk1 53687091200 -1 http://www.vmware.com/interfaces/specifications/vmdk.html#streamOptimized UCS-Demo-Image-virtualbox-disk1.vmdk -1 -1 
... 
0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100% 
Successfully imported the appliance.

ilyasst

# Forked by hand from https://raw.githubusercontent.com/milq/milq/master/scripts/bash/install-opencv.sh
# KEEP UBUNTU OR DEBIAN UP TO DATE

sudo apt-get -y update
sudo apt-get -y upgrade
sudo apt-get -y dist-upgrade
sudo apt-get -y autoremove


# INSTALL THE DEPENDENCIES

ilyasst

all
just
being
over
both
through
yourselves
its
before
o

ilyasst

from nltk.corpus import stopwords

with open("./stopwords.txt",'w') as outFile:
    stop_words = set(stopwords.words('english'))
    for w in stop_words:
	outFile.write(w+"\n")
outFile.close()