hikari mainline dmesg

gistfile1.txt

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.3.0-intgr (pmos@newn) (gcc version 9.2.0 (Alpine 9.2.0)) #13 SMP PREEMPT Sun Nov 3 19:09:10 UTC 2019
[    0.000000] CPU: ARMv7 Processor [510f02d4] revision 4 (ARMv7), cr=10c5787d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
[    0.000000] OF: fdt: Machine model: Sony Xperia acro S
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Failed to reserve 256 MiB
[    0.000000] percpu: Embedded 20 pages/cpu s52044 r8192 d21684 u81920
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 239108
[    0.000000] Kernel command line: startup=0x30 ta_info=0,16,256  semcandroidboot.babe1324=43423531323130575a5a warmboot=0x77665501 androidboot.serialno=CB51210WZZ console=ttyMSM0,115200,n8 PMOS_NO_OUTPUT_REDIRECT
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 937508K/962560K available (9216K kernel code, 857K rwdata, 3620K rodata, 2048K init, 266K bss, 25052K reserved, 0K cma-reserved, 261120K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] random: get_random_bytes called from start_kernel+0x364/0x508 with crng_init=0
[    0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 283149695806 ns
[    0.000008] sched_clock: 32 bits at 6MHz, resolution 148ns, wraps every 318145725365ns
[    0.000026] Switching to timer-based delay loop, resolution 148ns
[    0.000375] Console: colour dummy device 80x30
[    0.000426] Calibrating delay loop (skipped), value calculated using timer frequency.. 13.50 BogoMIPS (lpj=67500)
[    0.000446] pid_max: default: 32768 minimum: 301
[    0.000637] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.000664] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.001631] CPU: Testing write buffer coherency: ok
[    0.002076] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.161622] Setting up static identity map for 0x40300000 - 0x40300060
[    0.181774] rcu: Hierarchical SRCU implementation.
[    0.222243] smp: Bringing up secondary CPUs ...
[    0.303922] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.304353] smp: Brought up 1 node, 2 CPUs
[    0.304379] SMP: Total of 2 processors activated (27.00 BogoMIPS).
[    0.304391] CPU: All CPU(s) started in SVC mode.
[    0.305552] devtmpfs: initialized
[    0.310168] VFP support v0.3: implementor 51 architecture 64 part 2d variant 0 rev 0
[    0.310694] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.310726] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.310919] pinctrl core: initialized pinctrl subsystem
[    0.312395] NET: Registered protocol family 16
[    0.313150] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.315122] cpuidle: using governor menu
[    0.315536] No ATAGs?
[    0.315543] hw-breakpoint: Scorpion CPU detected. Hardware breakpoints and watchpoints disabled
[    0.317260] printk: console [pstore-1] enabled
[    0.317668] pstore: Registered ramoops as persistent store backend
[    0.317690] ramoops: using 0x20000@0x7ffe0000, ecc: 0
[    0.328540] qcom_rpm 104000.rpm: RPM firmware 2.0.102
[    0.367815] l0: supplied by regulator-dummy
[    0.368299] l1: supplied by regulator-dummy
[    0.368737] l2: supplied by regulator-dummy
[    0.369216] l3: supplied by regulator-dummy
[    0.369671] l4: supplied by regulator-dummy
[    0.370138] l5: supplied by regulator-dummy
[    0.370603] l6: supplied by regulator-dummy
[    0.371070] s0: supplied by regulator-dummy
[    0.371497] s1: supplied by regulator-dummy
[    0.371884] qcom_rpm_reg 104000.rpm:pm8901-regulators: regulator requires qcom,switch-mode-frequency property
[    0.371912] qcom_rpm_reg 104000.rpm:pm8901-regulators: driver callback failed to parse DT for regulator s2
[    0.371996] s2: supplied by regulator-dummy
[    0.372399] qcom_rpm_reg 104000.rpm:pm8901-regulators: regulator requires qcom,switch-mode-frequency property
[    0.372426] qcom_rpm_reg 104000.rpm:pm8901-regulators: driver callback failed to parse DT for regulator s3
[    0.372513] s3: supplied by regulator-dummy
[    0.372900] qcom_rpm_reg 104000.rpm:pm8901-regulators: regulator requires qcom,switch-mode-frequency property
[    0.372927] qcom_rpm_reg 104000.rpm:pm8901-regulators: driver callback failed to parse DT for regulator s4
[    0.373015] s4: supplied by regulator-dummy
[    0.373499] lvs0: supplied by regulator-dummy
[    0.373961] lvs1: supplied by regulator-dummy
[    0.374708] lvs2: supplied by regulator-dummy
[    0.375200] lvs3: supplied by regulator-dummy
[    0.375697] mvs: supplied by regulator-dummy
[    0.376392] l0: supplied by regulator-dummy
[    0.376936] l1: supplied by regulator-dummy
[    0.377498] l2: supplied by regulator-dummy
[    0.378039] l3: supplied by regulator-dummy
[    0.378592] l4: supplied by regulator-dummy
[    0.379147] l5: supplied by regulator-dummy
[    0.379685] l6: supplied by regulator-dummy
[    0.380267] l7: supplied by regulator-dummy
[    0.380828] l8: supplied by regulator-dummy
[    0.381426] l9: supplied by regulator-dummy
[    0.382007] l10: supplied by regulator-dummy
[    0.382599] l11: supplied by regulator-dummy
[    0.383189] l12: supplied by regulator-dummy
[    0.383756] l13: supplied by regulator-dummy
[    0.384500] l14: supplied by regulator-dummy
[    0.385137] l15: supplied by regulator-dummy
[    0.385791] l16: supplied by regulator-dummy
[    0.386385] l17: supplied by regulator-dummy
[    0.387025] l18: supplied by regulator-dummy
[    0.387646] l19: supplied by regulator-dummy
[    0.388262] l20: supplied by regulator-dummy
[    0.388905] l21: supplied by regulator-dummy
[    0.389528] l22: supplied by regulator-dummy
[    0.390184] l23: supplied by regulator-dummy
[    0.390809] l24: supplied by regulator-dummy
[    0.391480] l25: supplied by regulator-dummy
[    0.391973] qcom_rpm_reg 104000.rpm:pm8058-regulators: regulator requires qcom,switch-mode-frequency property
[    0.392000] qcom_rpm_reg 104000.rpm:pm8058-regulators: driver callback failed to parse DT for regulator s0
[    0.392181] s0: supplied by regulator-dummy
[    0.392646] qcom_rpm_reg 104000.rpm:pm8058-regulators: regulator requires qcom,switch-mode-frequency property
[    0.392673] qcom_rpm_reg 104000.rpm:pm8058-regulators: driver callback failed to parse DT for regulator s1
[    0.392857] s1: supplied by regulator-dummy
[    0.393335] qcom_rpm_reg 104000.rpm:pm8058-regulators: regulator requires qcom,switch-mode-frequency property
[    0.393362] qcom_rpm_reg 104000.rpm:pm8058-regulators: driver callback failed to parse DT for regulator s2
[    0.393547] s2: supplied by regulator-dummy
[    0.394027] qcom_rpm_reg 104000.rpm:pm8058-regulators: regulator requires qcom,switch-mode-frequency property
[    0.394054] qcom_rpm_reg 104000.rpm:pm8058-regulators: driver callback failed to parse DT for regulator s3
[    0.394889] s3: supplied by regulator-dummy
[    0.395444] qcom_rpm_reg 104000.rpm:pm8058-regulators: regulator requires qcom,switch-mode-frequency property
[    0.395475] qcom_rpm_reg 104000.rpm:pm8058-regulators: driver callback failed to parse DT for regulator s4
[    0.395678] s4: supplied by regulator-dummy
[    0.396334] lvs0: supplied by regulator-dummy
[    0.397039] lvs1: supplied by regulator-dummy
[    0.397538] qcom_rpm_reg 104000.rpm:pm8058-regulators: regulator requires qcom,switch-mode-frequency property
[    0.397565] qcom_rpm_reg 104000.rpm:pm8058-regulators: driver callback failed to parse DT for regulator ncp
[    0.397759] ncp: supplied by regulator-dummy
[    0.398872] vgaarb: loaded
[    0.399532] SCSI subsystem initialized
[    0.400263] usbcore: registered new interface driver usbfs
[    0.400355] usbcore: registered new interface driver hub
[    0.400498] usbcore: registered new device driver usb
[    0.401259] Advanced Linux Sound Architecture Driver Initialized.
[    0.402624] clocksource: Switched to clocksource dg_timer
[    1.096878] thermal_sys: Registered thermal governor 'step_wise'
[    1.097216] NET: Registered protocol family 2
[    1.097946] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    1.097996] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    1.098127] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    1.098342] TCP: Hash tables configured (established 8192 bind 8192)
[    1.098501] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.098577] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.098842] NET: Registered protocol family 1
[    1.110076] RPC: Registered named UNIX socket transport module.
[    1.110104] RPC: Registered udp transport module.
[    1.110119] RPC: Registered tcp transport module.
[    1.110135] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.110157] PCI: CLS 0 bytes, default 64
[    1.188763] hw perfevents: enabled with armv7_scorpion_mp PMU driver, 5 counters available
[    1.190674] Initialise system trusted keyrings
[    1.191058] workingset: timestamp_bits=30 max_order=18 bucket_order=0
[    1.200554] NFS: Registering the id_resolver key type
[    1.200608] Key type id_resolver registered
[    1.200626] Key type id_legacy registered
[    1.201673] Key type cifs.idmap registered
[    1.201706] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    1.202165] fuse: init (API version 7.31)
[    1.256559] Key type asymmetric registered
[    1.256588] Asymmetric key parser 'x509' registered
[    1.256681] bounce: pool size: 64 pages
[    1.256753] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.256775] io scheduler mq-deadline registered
[    1.256792] io scheduler kyber registered
[    1.259827] gsbi 19800000.gsbi: missing mode configuration
[    1.259890] gsbi: probe of 19800000.gsbi failed with error -22
[    1.260014] gsbi 19c00000.gsbi: GSBI port protocol: 6 crci: 0
[    1.262013] msm_serial 19c40000.serial: msm_serial: detected port #0
[    1.262075] msm_serial 19c40000.serial: uartclk = 7372800
[    1.262155] 19c40000.serial: ttyMSM0 at MMIO 0x19c40000 (irq = 24, base_baud = 460800) is a MSM
[    1.262208] msm_serial: console setup on port #0
[    2.228564] printk: console [ttyMSM0] enabled
[    2.234054] msm_serial: driver initialized
[    2.255886] brd: module loaded
[    2.270078] loop: module loaded
[    2.270457] ssbi 500000.qcom,ssbi: SSBI controller type: 'pmic-arbiter'
[    2.272877] pm8xxx_probe: PMIC revision 1: E3
[    2.278635] pm8xxx_probe: PMIC revision 2: 00
[    2.283243] ------------[ cut here ]------------
[    2.287507] WARNING: CPU: 0 PID: 1 at drivers/gpio/gpiolib.c:3605 gpiochip_irq_enable+0x18/0x44
[    2.292171] Modules linked in:
[    2.300591] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.3.0-intgr #13
[    2.303713] Hardware name: Generic DT based system
[    2.310257] [<c0312924>] (unwind_backtrace) from [<c030d648>] (show_stack+0x10/0x14)
[    2.314933] [<c030d648>] (show_stack) from [<c0af4f60>] (dump_stack+0x78/0x8c)
[    2.322834] [<c0af4f60>] (dump_stack) from [<c0322308>] (__warn.part.0+0xb8/0xd4)
[    2.329856] [<c0322308>] (__warn.part.0) from [<c0322498>] (warn_slowpath_null+0x44/0x4c)
[    2.337407] [<c0322498>] (warn_slowpath_null) from [<c06d949c>] (gpiochip_irq_enable+0x18/0x44)
[    2.345576] [<c06d949c>] (gpiochip_irq_enable) from [<c0374d48>] (irq_enable+0x38/0x68)
[    2.354075] [<c0374d48>] (irq_enable) from [<c0374de8>] (__irq_startup+0x70/0xa8)
[    2.362058] [<c0374de8>] (__irq_startup) from [<c0374e64>] (irq_startup+0x44/0x13c)
[    2.369697] [<c0374e64>] (irq_startup) from [<c0375234>] (irq_set_chained_handler_and_data+0x50/0x84)
[    2.377173] [<c0375234>] (irq_set_chained_handler_and_data) from [<c085259c>] (pm8xxx_probe+0x1e4/0x238)
[    2.386549] [<c085259c>] (pm8xxx_probe) from [<c0829ea8>] (platform_drv_probe+0x48/0x98)
[    2.396087] [<c0829ea8>] (platform_drv_probe) from [<c0827988>] (really_probe+0x108/0x40c)
[    2.404159] [<c0827988>] (really_probe) from [<c0827e58>] (driver_probe_device+0x78/0x1c0)
[    2.412230] [<c0827e58>] (driver_probe_device) from [<c0825b74>] (bus_for_each_drv+0x84/0xd0)
[    2.420478] [<c0825b74>] (bus_for_each_drv) from [<c08277e0>] (__device_attach+0xe0/0x178)
[    2.429069] [<c08277e0>] (__device_attach) from [<c0826978>] (bus_probe_device+0x84/0x8c)
[    2.437243] [<c0826978>] (bus_probe_device) from [<c0823474>] (device_add+0x388/0x648)
[    2.445490] [<c0823474>] (device_add) from [<c09a0504>] (of_platform_device_create_pdata+0x94/0xbc)
[    2.453297] [<c09a0504>] (of_platform_device_create_pdata) from [<c09a070c>] (of_platform_bus_create+0x1d4/0x4f0)
[    2.462236] [<c09a070c>] (of_platform_bus_create) from [<c09a0be0>] (of_platform_populate+0x8c/0x10c)
[    2.472652] [<c09a0be0>] (of_platform_populate) from [<c09a0cb8>] (devm_of_platform_populate+0x40/0x80)
[    2.481852] [<c09a0cb8>] (devm_of_platform_populate) from [<c0829ea8>] (platform_drv_probe+0x48/0x98)
[    2.491052] [<c0829ea8>] (platform_drv_probe) from [<c0827988>] (really_probe+0x108/0x40c)
[    2.500425] [<c0827988>] (really_probe) from [<c0827e58>] (driver_probe_device+0x78/0x1c0)
[    2.508586] [<c0827e58>] (driver_probe_device) from [<c0828200>] (device_driver_attach+0x58/0x60)
[    2.516833] [<c0828200>] (device_driver_attach) from [<c08282bc>] (__driver_attach+0xb4/0x154)
[    2.525772] [<c08282bc>] (__driver_attach) from [<c0825a94>] (bus_for_each_dev+0x78/0xc0)
[    2.534279] [<c0825a94>] (bus_for_each_dev) from [<c0826c28>] (bus_add_driver+0x170/0x20c)
[    2.542525] [<c0826c28>] (bus_add_driver) from [<c0828e5c>] (driver_register+0x7c/0x114)
[    2.550691] [<c0828e5c>] (driver_register) from [<c0302f7c>] (do_one_initcall+0x58/0x2ac)
[    2.558941] [<c0302f7c>] (do_one_initcall) from [<c1001218>] (kernel_init_freeable+0x2c0/0x364)
[    2.567010] [<c1001218>] (kernel_init_freeable) from [<c0b0c3e0>] (kernel_init+0x8/0x110)
[    2.575514] [<c0b0c3e0>] (kernel_init) from [<c03010e8>] (ret_from_fork+0x14/0x2c)
[    2.583839] Exception stack(0xc029bfb0 to 0xc029bff8)
[    2.591304] bfa0:                                     00000000 00000000 00000000 00000000
[    2.596430] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    2.604589] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[    2.612752] ---[ end trace 7643a64589d2448b ]---
[    2.630327] SCSI Media Changer driver v0.25 
[    2.632913] libphy: Fixed MDIO Bus: probed
[    2.633921] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[    2.637578] CSLIP: code copyright 1989 Regents of the University of California.
[    2.647385] usbcore: registered new interface driver ax88179_178a
[    2.654558] usbcore: registered new interface driver cdc_ether
[    2.660723] usbcore: registered new interface driver net1080
[    2.666520] usbcore: registered new interface driver cdc_subset
[    2.672287] usbcore: registered new interface driver cdc_ncm
[    2.678487] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.683861] ehci-pci: EHCI PCI platform driver
[    2.690226] usbcore: registered new interface driver cdc_acm
[    2.694598] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.701849] pm8xxx-keypad 500000.qcom,ssbi:pmic@0:keypad@148: number of keypad rows/columns not specified
[    2.708176] pm8xxx-keypad: probe of 500000.qcom,ssbi:pmic@0:keypad@148 failed with error -22
[    2.718436] input: pm8xxx_vib_ffmemless as /devices/platform/soc/500000.qcom,ssbi/500000.qcom,ssbi:pmic@0/500000.qcom,ssbi:pmic@0:vibrator@4a/input/input0
[    2.727720] input: pmic8xxx_pwrkey as /devices/platform/soc/500000.qcom,ssbi/500000.qcom,ssbi:pmic@0/500000.qcom,ssbi:pmic@0:pwrkey@1c/input/input1
[    2.741859] rtc-pm8xxx 500000.qcom,ssbi:pmic@0:rtc@1e8: registered as rtc0
[    2.753305] i2c /dev entries driver
[    2.760985] sdhci: Secure Digital Host Controller Interface driver
[    2.763446] sdhci: Copyright(c) Pierre Ossman
[    2.769603] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.774796] usbcore: registered new interface driver usbhid
[    2.779761] usbhid: USB HID core driver
[    2.787891] oprofile: using timer interrupt.
[    2.789201] NET: Registered protocol family 17
[    2.793602] Key type dns_resolver registered
[    2.797868] Registering SWP/SWPB emulation handler
[    2.803906] Loading compiled-in X.509 certificates
[    2.827417] rtc-pm8xxx 500000.qcom,ssbi:pmic@0:rtc@1e8: setting system clock to 1970-01-05T21:33:58 UTC (423238)
[    2.828355] ALSA device list:
[    2.836777]   No soundcards found.
[    2.839602] Warning: unable to open an initial console.
[    2.846685] Freeing unused kernel memory: 2048K
[    2.883008] Run /init as init process