Skip to content

Instantly share code, notes, and snippets.

@invisiblek

invisiblek/dmesg.0

Created September 7, 2014 16:47
Show Gist options
  • Save invisiblek/51e041c0ce7c6e66f0d7 to your computer and use it in GitHub Desktop.
Save invisiblek/51e041c0ce7c6e66f0d7 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
dmesg.0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-vanillablek (dp@shrew) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #3 SMP Mon Aug 11 13:47:01 CDT 2014
[ 0.000000] Command line: placeholder root=UUID=5dd195a9-8fc3-4537-984d-f4f4ff7d055e ro quiet splash acpi=ht nomdmonddf nomdmonisw
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Freeing 9b-100 pfn range: 101 pages freed
[ 0.000000] Freeing ba581-ba5ad pfn range: 44 pages freed
[ 0.000000] Freeing ba6e3-bb576 pfn range: 3731 pages freed
[ 0.000000] Freeing bb598-bb59a pfn range: 2 pages freed
[ 0.000000] Freeing bb59b-bb621 pfn range: 134 pages freed
[ 0.000000] Freeing bba61-bbff3 pfn range: 1426 pages freed
[ 0.000000] Freeing bc000-100000 pfn range: 278528 pages freed
[ 0.000000] Released 283966 pages of unused memory
[ 0.000000] Set 283966 page(s) to 1-1 mapping
[ 0.000000] Populating fbe182-10036c0 pfn range: 283966 pages added
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009afff] usable
[ 0.000000] Xen: [mem 0x000000000009b400-0x00000000000fffff] reserved
[ 0.000000] Xen: [mem 0x0000000000100000-0x00000000ba580fff] usable
[ 0.000000] Xen: [mem 0x00000000ba581000-0x00000000ba5acfff] reserved
[ 0.000000] Xen: [mem 0x00000000ba5ad000-0x00000000ba6e2fff] usable
[ 0.000000] Xen: [mem 0x00000000ba6e3000-0x00000000ba8cafff] ACPI NVS
[ 0.000000] Xen: [mem 0x00000000ba8cb000-0x00000000bb575fff] reserved
[ 0.000000] Xen: [mem 0x00000000bb576000-0x00000000bb597fff] usable
[ 0.000000] Xen: [mem 0x00000000bb598000-0x00000000bb599fff] reserved
[ 0.000000] Xen: [mem 0x00000000bb59a000-0x00000000bb59afff] usable
[ 0.000000] Xen: [mem 0x00000000bb59b000-0x00000000bb620fff] ACPI NVS
[ 0.000000] Xen: [mem 0x00000000bb621000-0x00000000bba60fff] usable
[ 0.000000] Xen: [mem 0x00000000bba61000-0x00000000bbff2fff] reserved
[ 0.000000] Xen: [mem 0x00000000bbff3000-0x00000000bbffffff] usable
[ 0.000000] Xen: [mem 0x00000000d0000000-0x00000000dfffffff] reserved
[ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] Xen: [mem 0x0000000100000000-0x000000103fffffff] usable
[ 0.000000] Malformed early option 'acpi'
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: MSI MS-7760/X79A-GD45 Plus (MS-7760), BIOS V17.7 12/20/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1040000 max_arch_pfn = 0x400000000
[ 0.000000] e820: last_pfn = 0xbc000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x1003400000-0x10035fffff]
[ 0.000000] [mem 0x1003400000-0x10035fffff] page 4k
[ 0.000000] BRK [0x02060000, 0x02060fff] PGTABLE
[ 0.000000] BRK [0x02061000, 0x02061fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1000000000-0x10033fffff]
[ 0.000000] [mem 0x1000000000-0x10033fffff] page 4k
[ 0.000000] BRK [0x02062000, 0x02062fff] PGTABLE
[ 0.000000] BRK [0x02063000, 0x02063fff] PGTABLE
[ 0.000000] BRK [0x02064000, 0x02064fff] PGTABLE
[ 0.000000] BRK [0x02065000, 0x02065fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xf80000000-0xfffffffff]
[ 0.000000] [mem 0xf80000000-0xfffffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xba580fff]
[ 0.000000] [mem 0x00100000-0xba580fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xba5ad000-0xba6e2fff]
[ 0.000000] [mem 0xba5ad000-0xba6e2fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbb576000-0xbb597fff]
[ 0.000000] [mem 0xbb576000-0xbb597fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbb59a000-0xbb59afff]
[ 0.000000] [mem 0xbb59a000-0xbb59afff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbb621000-0xbba60fff]
[ 0.000000] [mem 0xbb621000-0xbba60fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbbff3000-0xbbffffff]
[ 0.000000] [mem 0xbbff3000-0xbbffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0xf7fffffff]
[ 0.000000] [mem 0x100000000-0xf7fffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x1003600000-0x103fffffff]
[ 0.000000] [mem 0x1003600000-0x103fffffff] page 4k
[ 0.000000] RAMDISK: [mem 0x023f1000-0x0360afff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000BA7EB080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000BA7F3BE8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000BA7EB190 008A53 (v02 ALASKA A M I 00000019 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000BA8C2F80 000040
[ 0.000000] ACPI: APIC 0x00000000BA7F3CF8 0000C8 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000BA7F3DC0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000BA7F3E08 00003C (v01 ALASKA OEMMCFG. 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000BA7F3E48 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000BA7F3E80 0CD128 (v02 INTEL CpuPm 00004000 INTL 20051117)
[ 0.000000] ACPI: EINJ 0x00000000BA8C0FA8 000130 (v01 AMI AMI EINJ 00000000 00000000)
[ 0.000000] ACPI: ERST 0x00000000BA8C10D8 000230 (v01 AMIER AMI ERST 00000000 00000000)
[ 0.000000] ACPI: HEST 0x00000000BA8C1308 0000A8 (v01 AMI AMI HEST 00000000 00000000)
[ 0.000000] ACPI: BERT 0x00000000BA8C13B0 000030 (v01 AMI AMI BERT 00000000 00000000)
[ 0.000000] ACPI: XMAR 0x00000000BA8C13E0 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] NUMA turned off
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000103fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x103fffffff]
[ 0.000000] NODE_DATA [mem 0x10036bb000-0x10036bffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x103fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009afff]
[ 0.000000] node 0: [mem 0x00100000-0xba580fff]
[ 0.000000] node 0: [mem 0xba5ad000-0xba6e2fff]
[ 0.000000] node 0: [mem 0xbb576000-0xbb597fff]
[ 0.000000] node 0: [mem 0xbb59a000-0xbb59afff]
[ 0.000000] node 0: [mem 0xbb621000-0xbba60fff]
[ 0.000000] node 0: [mem 0xbbff3000-0xbbffffff]
[ 0.000000] node 0: [mem 0x100000000-0x103fffffff]
[ 0.000000] On node 0 totalpages: 16755393
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3994 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11885 pages used for memmap
[ 0.000000] DMA32 zone: 760615 pages, LIFO batch:31
[ 0.000000] Normal zone: 249856 pages used for memmap
[ 0.000000] Normal zone: 15990784 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 64
[ 0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba581000-0xba5acfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba6e3000-0xba8cafff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba8cb000-0xbb575fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb598000-0xbb599fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb59b000-0xbb620fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbba61000-0xbbff2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbc000000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xe0000000-0xfed1bfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.4.0 (preserve-AD)
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880ffb200000 s86656 r8192 d23936 u262144
[ 0.000000] pcpu-alloc: s86656 r8192 d23936 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] xen: PV spinlocks enabled
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16493567
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: placeholder root=UUID=5dd195a9-8fc3-4537-984d-f4f4ff7d055e ro quiet splash acpi=ht nomdmonddf nomdmonisw
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] software IO TLB [mem 0xfaef08000-0xfb2f08000] (64MB) mapped at [ffff880faef08000-ffff880fb2f07fff]
[ 0.000000] Memory: 64615612K/67021572K available (7506K kernel code, 1183K rwdata, 3660K rodata, 1348K init, 1320K bss, 2405960K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:16640 nr_irqs:1152 16
[ 0.000000] xen:events: Using FIFO-based ABI
[ 0.000000] xen: sci override: global_irq=9 trigger=0 polarity=0
[ 0.000000] xen: registering gsi 9 triggering 0 polarity 0
[ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9)
[ 0.000000] xen: acpi sci 9
[ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1)
[ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2)
[ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3)
[ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4)
[ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5)
[ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6)
[ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7)
[ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8)
[ 0.000000] xen: --> pirq=10 -> irq=10 (gsi=10)
[ 0.000000] xen: --> pirq=11 -> irq=11 (gsi=11)
[ 0.000000] xen: --> pirq=12 -> irq=12 (gsi=12)
[ 0.000000] xen: --> pirq=13 -> irq=13 (gsi=13)
[ 0.000000] xen: --> pirq=14 -> irq=14 (gsi=14)
[ 0.000000] xen: --> pirq=15 -> irq=15 (gsi=15)
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 268435456 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Xen: using vcpuop timer interface
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] tsc: Detected 3700.092 MHz processor
[ 9.134923] Calibrating delay loop (skipped), value calculated using timer frequency.. 7400.18 BogoMIPS (lpj=14800368)
[ 9.134925] pid_max: default: 32768 minimum: 301
[ 9.134933] ACPI: Core revision 20140724
[ 9.279052] ACPI: All ACPI Tables successfully acquired
[ 9.307199] Security Framework initialized
[ 9.307212] AppArmor: AppArmor initialized
[ 9.307213] Yama: becoming mindful.
[ 9.312857] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
[ 9.325403] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 9.330377] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 9.330470] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 9.330861] Initializing cgroup subsys memory
[ 9.330866] Initializing cgroup subsys devices
[ 9.330869] Initializing cgroup subsys freezer
[ 9.330871] Initializing cgroup subsys net_cls
[ 9.330873] Initializing cgroup subsys blkio
[ 9.330875] Initializing cgroup subsys perf_event
[ 9.330876] Initializing cgroup subsys hugetlb
[ 9.330920] CPU: Physical Processor ID: 0
[ 9.330921] CPU: Processor Core ID: 0
[ 9.331645] mce: CPU supports 2 MCE banks
[ 9.331658] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 9.331658] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4
[ 9.331756] Freeing SMP alternatives memory: 28K (ffffffff81e7a000 - ffffffff81e81000)
[ 9.332609] ftrace: allocating 29118 entries in 114 pages
[ 9.342578] cpu 0 spinlock event irq 65
[ 9.348645] Performance Events: unsupported p6 CPU model 62 no PMU driver, software events only.
[ 9.349782] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 9.349838] installing Xen timer for CPU 1
[ 9.349844] cpu 1 spinlock event irq 72
[ 9.350776] installing Xen timer for CPU 2
[ 9.350781] cpu 2 spinlock event irq 79
[ 9.351648] installing Xen timer for CPU 3
[ 9.351653] cpu 3 spinlock event irq 86
[ 9.352512] installing Xen timer for CPU 4
[ 9.352517] cpu 4 spinlock event irq 93
[ 9.353371] installing Xen timer for CPU 5
[ 9.353375] cpu 5 spinlock event irq 100
[ 9.354219] installing Xen timer for CPU 6
[ 9.354223] cpu 6 spinlock event irq 107
[ 9.355076] installing Xen timer for CPU 7
[ 9.355081] cpu 7 spinlock event irq 114
[ 9.355863] x86: Booted up 1 node, 8 CPUs
[ 9.356042] devtmpfs: initialized
[ 9.356081] memory block size : 1024MB
[ 9.357630] evm: security.selinux
[ 9.357631] evm: security.SMACK64
[ 9.357632] evm: security.ima
[ 9.357632] evm: security.capability
[ 9.357687] PM: Registering ACPI NVS region [mem 0xba6e3000-0xba8cafff] (1998848 bytes)
[ 9.357703] PM: Registering ACPI NVS region [mem 0xbb59b000-0xbb620fff] (548864 bytes)
[ 9.358284] pinctrl core: initialized pinctrl subsystem
[ 9.358331] regulator-dummy: no parameters
[ 9.358366] RTC time: 15:23:01, date: 09/07/14
[ 9.358429] NET: Registered protocol family 16
[ 9.358437] xen:grant_table: Grant tables using version 1 layout
[ 9.358445] Grant table initialized
[ 9.358640] ACPI: bus type PCI registered
[ 9.358642] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 9.358765] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xd0000000-0xdfffffff] (base 0xd0000000)
[ 9.358767] PCI: MMCONFIG at [mem 0xd0000000-0xdfffffff] reserved in E820
[ 9.372135] PCI: Using configuration type 1 for base access
[ 9.379649] ACPI: Added _OSI(Module Device)
[ 9.379651] ACPI: Added _OSI(Processor Device)
[ 9.379652] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 9.379652] ACPI: Added _OSI(Processor Aggregator Device)
[ 9.390545] ACPI: Executed 1 blocks of module-level executable AML code
[ 9.458939] \_SB_:_OSC invalid UUID
[ 9.458942] _OSC request data:1 1f
[ 9.459748] ACPI: Interpreter enabled
[ 9.459753] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
[ 9.459755] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
[ 9.459763] ACPI: (supports S0 S3 S4 S5)
[ 9.459764] ACPI: Using IOAPIC for interrupt routing
[ 9.459821] HEST: Table parsing has been initialized.
[ 9.459822] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 9.468602] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 9.468607] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 9.468690] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME AER]
[ 9.468765] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability]
[ 9.468991] PCI host bridge to bus 0000:00
[ 9.468993] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 9.468994] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 9.468995] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 9.468996] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 9.468997] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 9.468998] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 9.468999] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 9.469000] pci_bus 0000:00: root bus resource [mem 0xcc000000-0xffffffff]
[ 9.469014] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000
[ 9.469106] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 9.469192] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400
[ 9.469301] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 9.469343] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 9.469393] pci 0000:00:02.0: [8086:0e04] type 01 class 0x060400
[ 9.469502] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 9.469543] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 9.469591] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400
[ 9.469702] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 9.469745] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 9.469789] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000
[ 9.469920] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000
[ 9.470055] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020
[ 9.470070] pci 0000:00:05.4: reg 0x10: [mem 0xf4f2a000-0xf4f2afff]
[ 9.470236] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
[ 9.470364] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
[ 9.470457] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
[ 9.470488] pci 0000:00:16.0: reg 0x10: [mem 0xf4f29000-0xf4f2900f 64bit]
[ 9.470596] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 9.470677] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
[ 9.470702] pci 0000:00:19.0: reg 0x10: [mem 0xf4f00000-0xf4f1ffff]
[ 9.470712] pci 0000:00:19.0: reg 0x14: [mem 0xf4f28000-0xf4f28fff]
[ 9.470723] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
[ 9.470815] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 9.470849] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 9.470889] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
[ 9.470917] pci 0000:00:1a.0: reg 0x10: [mem 0xf4f27000-0xf4f273ff]
[ 9.471044] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 9.471079] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 9.471119] pci 0000:00:1b.0: [8086:1d20] type 00 class 0x040300
[ 9.471142] pci 0000:00:1b.0: reg 0x10: [mem 0xf4f20000-0xf4f23fff 64bit]
[ 9.471247] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 9.471316] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
[ 9.471432] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 9.471460] pci 0000:00:1c.0: Disabling UPDCR peer decodes
[ 9.471469] pci 0000:00:1c.0: Enabling MPC IRBNCE
[ 9.471471] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[ 9.471491] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 9.471527] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400
[ 9.471643] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 9.471672] pci 0000:00:1c.1: Enabling MPC IRBNCE
[ 9.471675] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled
[ 9.471694] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 9.471732] pci 0000:00:1c.2: [8086:1d14] type 01 class 0x060400
[ 9.471848] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 9.471877] pci 0000:00:1c.2: Enabling MPC IRBNCE
[ 9.471879] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled
[ 9.471899] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 9.471938] pci 0000:00:1c.5: [8086:1d1a] type 01 class 0x060400
[ 9.472054] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 9.472082] pci 0000:00:1c.5: Enabling MPC IRBNCE
[ 9.472085] pci 0000:00:1c.5: Intel PCH root port ACS workaround enabled
[ 9.472104] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 9.472143] pci 0000:00:1c.7: [8086:1d1e] type 01 class 0x060400
[ 9.472259] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 9.472287] pci 0000:00:1c.7: Enabling MPC IRBNCE
[ 9.472290] pci 0000:00:1c.7: Intel PCH root port ACS workaround enabled
[ 9.472317] pci 0000:00:1c.7: System wakeup disabled by ACPI
[ 9.472360] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
[ 9.472388] pci 0000:00:1d.0: reg 0x10: [mem 0xf4f26000-0xf4f263ff]
[ 9.472515] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 9.472550] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 9.472583] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 9.472678] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 9.472714] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
[ 9.472916] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
[ 9.472943] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
[ 9.472954] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
[ 9.472964] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
[ 9.472975] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
[ 9.472985] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 9.472995] pci 0000:00:1f.2: reg 0x24: [mem 0xf4f25000-0xf4f257ff]
[ 9.473065] pci 0000:00:1f.2: PME# supported from D3hot
[ 9.473129] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
[ 9.473150] pci 0000:00:1f.3: reg 0x10: [mem 0xf4f24000-0xf4f240ff 64bit]
[ 9.473179] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 9.473310] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 9.473379] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 9.473445] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 9.473525] pci 0000:00:11.0: PCI bridge to [bus 04]
[ 9.473603] pci 0000:00:1c.0: PCI bridge to [bus 05]
[ 9.473712] pci 0000:06:00.0: [1912:0015] type 00 class 0x0c0330
[ 9.473749] pci 0000:06:00.0: reg 0x10: [mem 0xf4e00000-0xf4e01fff 64bit]
[ 9.473933] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 9.480481] pci 0000:00:1c.1: PCI bridge to [bus 06]
[ 9.480489] pci 0000:00:1c.1: bridge window [mem 0xf4e00000-0xf4efffff]
[ 9.480605] pci 0000:07:00.0: [1912:0015] type 00 class 0x0c0330
[ 9.480643] pci 0000:07:00.0: reg 0x10: [mem 0xf4d00000-0xf4d01fff 64bit]
[ 9.480828] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 9.488654] pci 0000:00:1c.2: PCI bridge to [bus 07]
[ 9.488662] pci 0000:00:1c.2: bridge window [mem 0xf4d00000-0xf4dfffff]
[ 9.488765] pci 0000:08:00.0: [1002:954f] type 00 class 0x030000
[ 9.488801] pci 0000:08:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 9.488827] pci 0000:08:00.0: reg 0x18: [mem 0xf4c20000-0xf4c2ffff 64bit]
[ 9.488843] pci 0000:08:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 9.488875] pci 0000:08:00.0: reg 0x30: [mem 0xf4c00000-0xf4c1ffff pref]
[ 9.488962] pci 0000:08:00.0: supports D1 D2
[ 9.489037] pci 0000:08:00.1: [1002:aa38] type 00 class 0x040300
[ 9.489073] pci 0000:08:00.1: reg 0x10: [mem 0xf4c30000-0xf4c33fff 64bit]
[ 9.489236] pci 0000:08:00.1: supports D1 D2
[ 9.496787] pci 0000:00:1c.5: PCI bridge to [bus 08]
[ 9.496793] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 9.496799] pci 0000:00:1c.5: bridge window [mem 0xf4c00000-0xf4cfffff]
[ 9.496806] pci 0000:00:1c.5: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 9.496904] pci 0000:09:00.0: [1b4b:9485] type 00 class 0x010400
[ 9.496938] pci 0000:09:00.0: reg 0x10: [mem 0xf4b40000-0xf4b5ffff 64bit]
[ 9.496963] pci 0000:09:00.0: reg 0x18: [mem 0xf4b00000-0xf4b3ffff 64bit]
[ 9.497007] pci 0000:09:00.0: reg 0x30: [mem 0xf4b60000-0xf4b6ffff pref]
[ 9.497099] pci 0000:09:00.0: supports D1
[ 9.497100] pci 0000:09:00.0: PME# supported from D0 D1 D3hot
[ 9.504940] pci 0000:00:1c.7: PCI bridge to [bus 09]
[ 9.504948] pci 0000:00:1c.7: bridge window [mem 0xf4b00000-0xf4bfffff]
[ 9.505046] pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode)
[ 9.505059] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 9.505060] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 9.505062] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 9.505064] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 9.505065] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 9.505066] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 9.505067] pci 0000:00:1e.0: bridge window [mem 0xcc000000-0xffffffff] (subtractive decode)
[ 9.505236] xen: registering gsi 13 triggering 1 polarity 0
[ 9.505368] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
[ 9.505370] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 9.505383] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 9.505412] PCI host bridge to bus 0000:ff
[ 9.505414] pci_bus 0000:ff: root bus resource [bus ff]
[ 9.505427] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000
[ 9.505504] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000
[ 9.505578] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000
[ 9.505641] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000
[ 9.505702] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000
[ 9.505764] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000
[ 9.505828] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000
[ 9.505888] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000
[ 9.505949] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000
[ 9.506008] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000
[ 9.506072] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000
[ 9.506131] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000
[ 9.506195] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000
[ 9.506257] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100
[ 9.506328] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000
[ 9.506414] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000
[ 9.506499] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000
[ 9.506584] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000
[ 9.506672] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000
[ 9.506763] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000
[ 9.506851] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000
[ 9.506937] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000
[ 9.507023] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000
[ 9.507108] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000
[ 9.507193] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000
[ 9.507279] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000
[ 9.507364] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000
[ 9.507450] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000
[ 9.507533] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000
[ 9.507593] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100
[ 9.507654] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000
[ 9.507713] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100
[ 9.507776] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000
[ 9.507837] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000
[ 9.507896] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000
[ 9.508023] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 9.508057] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 9.508089] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 9.508121] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 9.508152] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 9.508184] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 9.508217] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 9.508248] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 9.510110] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 9.510156] xen:balloon: Initialising balloon driver
[ 9.512467] xen_balloon: Initialising balloon driver
[ 9.512596] vgaarb: device added: PCI:0000:08:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 9.512605] vgaarb: loaded
[ 9.512606] vgaarb: bridge control possible 0000:08:00.0
[ 9.512760] SCSI subsystem initialized
[ 9.512809] libata version 3.00 loaded.
[ 9.512829] ACPI: bus type USB registered
[ 9.512843] usbcore: registered new interface driver usbfs
[ 9.512848] usbcore: registered new interface driver hub
[ 9.512891] usbcore: registered new device driver usb
[ 9.513033] PCI: Using ACPI for IRQ routing
[ 9.523228] PCI: pci_cache_line_size set to 64 bytes
[ 9.523393] e820: reserve RAM buffer [mem 0x0009b000-0x0009ffff]
[ 9.523394] e820: reserve RAM buffer [mem 0xba581000-0xbbffffff]
[ 9.523396] e820: reserve RAM buffer [mem 0xba6e3000-0xbbffffff]
[ 9.523397] e820: reserve RAM buffer [mem 0xbb598000-0xbbffffff]
[ 9.523398] e820: reserve RAM buffer [mem 0xbb59b000-0xbbffffff]
[ 9.523398] e820: reserve RAM buffer [mem 0xbba61000-0xbbffffff]
[ 9.523486] NetLabel: Initializing
[ 9.523487] NetLabel: domain hash size = 128
[ 9.523488] NetLabel: protocols = UNLABELED CIPSOv4
[ 9.523496] NetLabel: unlabeled traffic allowed by default
[ 9.523659] Switched to clocksource xen
[ 9.527531] AppArmor: AppArmor Filesystem Enabled
[ 9.527552] pnp: PnP ACPI init
[ 9.527653] system 00:00: [mem 0xf4fff000-0xf4ffffff] has been reserved
[ 9.527654] system 00:00: [mem 0xfbfff000-0xfbffffff] has been reserved
[ 9.527656] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 9.527657] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
[ 9.527658] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
[ 9.527659] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
[ 9.527660] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
[ 9.527661] system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved
[ 9.527662] system 00:00: [mem 0xfed45000-0xfedfffff] has been reserved
[ 9.527663] system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 9.527665] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 9.527722] system 00:01: [mem 0xf4ffc000-0xf4ffdfff] has been reserved
[ 9.527724] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 9.527863] system 00:02: [io 0x0a00-0x0a0f] has been reserved
[ 9.527864] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 9.527970] xen: registering gsi 4 triggering 1 polarity 0
[ 9.527995] pnp 00:03: [dma 0 disabled]
[ 9.528021] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 9.528029] xen: registering gsi 8 triggering 1 polarity 0
[ 9.528057] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 9.528097] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 9.528099] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 9.528199] system 00:06: [io 0x0400-0x0453] could not be reserved
[ 9.528201] system 00:06: [io 0x0458-0x047f] has been reserved
[ 9.528202] system 00:06: [io 0x1180-0x119f] has been reserved
[ 9.528203] system 00:06: [io 0x0500-0x057f] has been reserved
[ 9.528204] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 9.528206] system 00:06: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 9.528207] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 9.528208] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 9.528251] system 00:07: [io 0x0454-0x0457] has been reserved
[ 9.528252] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 9.528450] pnp: PnP ACPI: found 8 devices
[ 9.533032] PM-Timer failed consistency check (0xffffff) - aborting.
[ 9.533133] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 9.533147] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 9.533159] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 9.533172] pci 0000:00:11.0: PCI bridge to [bus 04]
[ 9.533188] pci 0000:00:1c.0: PCI bridge to [bus 05]
[ 9.533202] pci 0000:00:1c.1: PCI bridge to [bus 06]
[ 9.533208] pci 0000:00:1c.1: bridge window [mem 0xf4e00000-0xf4efffff]
[ 9.533218] pci 0000:00:1c.2: PCI bridge to [bus 07]
[ 9.533223] pci 0000:00:1c.2: bridge window [mem 0xf4d00000-0xf4dfffff]
[ 9.533233] pci 0000:00:1c.5: PCI bridge to [bus 08]
[ 9.533236] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 9.533241] pci 0000:00:1c.5: bridge window [mem 0xf4c00000-0xf4cfffff]
[ 9.533245] pci 0000:00:1c.5: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 9.533252] pci 0000:00:1c.7: PCI bridge to [bus 09]
[ 9.533258] pci 0000:00:1c.7: bridge window [mem 0xf4b00000-0xf4bfffff]
[ 9.533268] pci 0000:00:1e.0: PCI bridge to [bus 0a]
[ 9.533282] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 9.533283] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 9.533284] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 9.533285] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 9.533286] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 9.533287] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 9.533288] pci_bus 0000:00: resource 10 [mem 0xcc000000-0xffffffff]
[ 9.533289] pci_bus 0000:06: resource 1 [mem 0xf4e00000-0xf4efffff]
[ 9.533291] pci_bus 0000:07: resource 1 [mem 0xf4d00000-0xf4dfffff]
[ 9.533292] pci_bus 0000:08: resource 0 [io 0xe000-0xefff]
[ 9.533293] pci_bus 0000:08: resource 1 [mem 0xf4c00000-0xf4cfffff]
[ 9.533294] pci_bus 0000:08: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 9.533295] pci_bus 0000:09: resource 1 [mem 0xf4b00000-0xf4bfffff]
[ 9.533296] pci_bus 0000:0a: resource 4 [io 0x0000-0x03af]
[ 9.533297] pci_bus 0000:0a: resource 5 [io 0x03e0-0x0cf7]
[ 9.533298] pci_bus 0000:0a: resource 6 [io 0x03b0-0x03df]
[ 9.533299] pci_bus 0000:0a: resource 7 [io 0x0d00-0xffff]
[ 9.533300] pci_bus 0000:0a: resource 8 [mem 0x000a0000-0x000bffff]
[ 9.533300] pci_bus 0000:0a: resource 9 [mem 0x000c0000-0x000dffff]
[ 9.533301] pci_bus 0000:0a: resource 10 [mem 0xcc000000-0xffffffff]
[ 9.533322] NET: Registered protocol family 2
[ 9.533793] TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
[ 9.534356] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 9.534461] TCP: Hash tables configured (established 524288 bind 65536)
[ 9.534474] TCP: reno registered
[ 9.534561] UDP hash table entries: 32768 (order: 8, 1048576 bytes)
[ 9.534762] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
[ 9.534911] NET: Registered protocol family 1
[ 9.535005] xen: registering gsi 16 triggering 0 polarity 1
[ 9.535019] xen: --> pirq=16 -> irq=16 (gsi=16)
[ 9.535163] xen: registering gsi 23 triggering 0 polarity 1
[ 9.535168] xen: --> pirq=23 -> irq=23 (gsi=23)
[ 9.535294] xen: registering gsi 16 triggering 0 polarity 1
[ 9.535295] Already setup the GSI :16
[ 9.535315] xen: registering gsi 17 triggering 0 polarity 1
[ 9.535319] xen: --> pirq=17 -> irq=17 (gsi=17)
[ 9.535420] xen: registering gsi 18 triggering 0 polarity 1
[ 9.535424] xen: --> pirq=18 -> irq=18 (gsi=18)
[ 9.535462] xen: registering gsi 18 triggering 0 polarity 1
[ 9.535463] Already setup the GSI :18
[ 9.535511] pci 0000:08:00.0: Boot video device
[ 9.535569] PCI: CLS 64 bytes, default 64
[ 9.535616] Trying to unpack rootfs image as initramfs...
[ 9.733654] Freeing initrd memory: 18536K (ffff8800023f1000 - ffff88000360b000)
[ 9.733970] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 9.734013] microcode: CPU0 sig=0x306e4, pf=0x4, revision=0x416
[ 9.734018] microcode: CPU1 sig=0x306e4, pf=0x4, revision=0x416
[ 9.734027] microcode: CPU2 sig=0x306e4, pf=0x4, revision=0x416
[ 9.734035] microcode: CPU3 sig=0x306e4, pf=0x4, revision=0x416
[ 9.734044] microcode: CPU4 sig=0x306e4, pf=0x4, revision=0x416
[ 9.734052] microcode: CPU5 sig=0x306e4, pf=0x4, revision=0x416
[ 9.734061] microcode: CPU6 sig=0x306e4, pf=0x4, revision=0x416
[ 9.734069] microcode: CPU7 sig=0x306e4, pf=0x4, revision=0x416
[ 9.734144] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 9.734162] Scanning for low memory corruption every 60 seconds
[ 9.734463] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 9.734483] Initialise system trusted keyring
[ 9.734502] audit: initializing netlink subsys (disabled)
[ 9.734520] audit: type=2000 audit(1410103382.694:1): initialized
[ 9.734756] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 9.735608] zpool: loaded
[ 9.735610] zbud: loaded
[ 9.735733] VFS: Disk quotas dquot_6.5.2
[ 9.735756] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 9.736047] fuse init (API version 7.23)
[ 9.736107] msgmni has been set to 32768
[ 9.736146] Key type big_key registered
[ 9.736566] Key type asymmetric registered
[ 9.736569] Asymmetric key parser 'x509' registered
[ 9.736591] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 9.736645] io scheduler noop registered
[ 9.736647] io scheduler deadline registered (default)
[ 9.736666] io scheduler cfq registered
[ 9.736820] xen: registering gsi 26 triggering 0 polarity 1
[ 9.736835] xen: --> pirq=26 -> irq=26 (gsi=26)
[ 9.736965] xen: registering gsi 32 triggering 0 polarity 1
[ 9.736969] xen: --> pirq=32 -> irq=32 (gsi=32)
[ 9.737087] xen: registering gsi 40 triggering 0 polarity 1
[ 9.737091] xen: --> pirq=40 -> irq=40 (gsi=40)
[ 9.737208] xen: registering gsi 16 triggering 0 polarity 1
[ 9.737210] Already setup the GSI :16
[ 9.737314] xen: registering gsi 17 triggering 0 polarity 1
[ 9.737315] Already setup the GSI :17
[ 9.737521] xen: registering gsi 16 triggering 0 polarity 1
[ 9.737522] Already setup the GSI :16
[ 9.737619] xen: registering gsi 19 triggering 0 polarity 1
[ 9.737623] xen: --> pirq=19 -> irq=19 (gsi=19)
[ 9.737719] ioapic: probe of 0000:00:05.4 failed with error -22
[ 9.737726] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 9.737736] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 9.737782] intel_idle: MWAIT substates: 0x1120
[ 9.737783] intel_idle: v0.4 model 0x3E
[ 9.737783] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 9.737799] intel_idle: intel_idle yielding to none
[ 9.737807] ipmi message handler version 39.2
[ 9.737876] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 9.737880] ACPI: Power Button [PWRB]
[ 9.737907] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 9.737908] ACPI: Power Button [PWRF]
[ 9.738672] Monitor-Mwait will be used to enter C-1 state
[ 9.738692] Monitor-Mwait will be used to enter C-2 state
[ 9.744286] Warning: Processor Platform Limit not supported.
[ 9.744400] ERST: Error Record Serialization Table (ERST) support is initialized.
[ 9.744404] pstore: Registered erst as persistent store backend
[ 9.744453] GHES: APEI firmware first mode is enabled by WHEA _OSC.
[ 9.744949] xen_acpi_processor: Uploading Xen processor PM info
[ 9.745773] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 9.766304] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 9.767427] hpet_acpi_add: no address or irqs in _CRS
[ 9.767438] Linux agpgart interface v0.103
[ 9.768294] brd: module loaded
[ 9.768717] loop: module loaded
[ 9.768990] libphy: Fixed MDIO Bus: probed
[ 9.769050] tun: Universal TUN/TAP device driver, 1.6
[ 9.769050] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 9.769085] PPP generic driver version 2.4.2
[ 9.769114] xen_netfront: Initialising Xen virtual ethernet driver
[ 9.769123] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 9.769128] ehci-pci: EHCI PCI platform driver
[ 9.769178] xen: registering gsi 16 triggering 0 polarity 1
[ 9.769180] Already setup the GSI :16
[ 9.769211] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 9.769215] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 9.769230] ehci-pci 0000:00:1a.0: debug port 2
[ 9.773179] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 9.773221] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf4f27000
[ 9.783713] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 9.783834] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 9.783836] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.783837] usb usb1: Product: EHCI Host Controller
[ 9.783838] usb usb1: Manufacturer: Linux 3.16.0-vanillablek ehci_hcd
[ 9.783839] usb usb1: SerialNumber: 0000:00:1a.0
[ 9.783934] hub 1-0:1.0: USB hub found
[ 9.783948] hub 1-0:1.0: 2 ports detected
[ 9.784099] xen: registering gsi 23 triggering 0 polarity 1
[ 9.784102] Already setup the GSI :23
[ 9.784126] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 9.784129] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 9.784142] ehci-pci 0000:00:1d.0: debug port 2
[ 9.788041] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 9.788082] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf4f26000
[ 9.799717] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 9.799832] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 9.799834] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.799835] usb usb2: Product: EHCI Host Controller
[ 9.799836] usb usb2: Manufacturer: Linux 3.16.0-vanillablek ehci_hcd
[ 9.799837] usb usb2: SerialNumber: 0000:00:1d.0
[ 9.799926] hub 2-0:1.0: USB hub found
[ 9.799939] hub 2-0:1.0: 2 ports detected
[ 9.800043] ehci-platform: EHCI generic platform driver
[ 9.800050] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 9.800054] ohci-pci: OHCI PCI platform driver
[ 9.800064] ohci-platform: OHCI generic platform driver
[ 9.800069] uhci_hcd: USB Universal Host Controller Interface driver
[ 9.800111] xen: registering gsi 17 triggering 0 polarity 1
[ 9.800113] Already setup the GSI :17
[ 9.800129] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 9.800132] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 3
[ 9.806205] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 9.806207] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.806208] usb usb3: Product: xHCI Host Controller
[ 9.806209] usb usb3: Manufacturer: Linux 3.16.0-vanillablek xhci_hcd
[ 9.806210] usb usb3: SerialNumber: 0000:06:00.0
[ 9.806306] hub 3-0:1.0: USB hub found
[ 9.806321] hub 3-0:1.0: 2 ports detected
[ 9.806417] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 9.806419] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 4
[ 9.809034] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 9.809035] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.809036] usb usb4: Product: xHCI Host Controller
[ 9.809037] usb usb4: Manufacturer: Linux 3.16.0-vanillablek xhci_hcd
[ 9.809038] usb usb4: SerialNumber: 0000:06:00.0
[ 9.809124] hub 4-0:1.0: USB hub found
[ 9.809138] hub 4-0:1.0: 2 ports detected
[ 9.809253] xen: registering gsi 18 triggering 0 polarity 1
[ 9.809255] Already setup the GSI :18
[ 9.809272] xhci_hcd 0000:07:00.0: xHCI Host Controller
[ 9.809276] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 5
[ 9.815291] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 9.815293] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.815294] usb usb5: Product: xHCI Host Controller
[ 9.815294] usb usb5: Manufacturer: Linux 3.16.0-vanillablek xhci_hcd
[ 9.815295] usb usb5: SerialNumber: 0000:07:00.0
[ 9.815372] hub 5-0:1.0: USB hub found
[ 9.815387] hub 5-0:1.0: 2 ports detected
[ 9.815480] xhci_hcd 0000:07:00.0: xHCI Host Controller
[ 9.815482] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 6
[ 9.818325] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 9.818329] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.818332] usb usb6: Product: xHCI Host Controller
[ 9.818335] usb usb6: Manufacturer: Linux 3.16.0-vanillablek xhci_hcd
[ 9.818338] usb usb6: SerialNumber: 0000:07:00.0
[ 9.818617] hub 6-0:1.0: USB hub found
[ 9.818657] hub 6-0:1.0: 2 ports detected
[ 9.819008] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 9.819674] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 9.819684] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 9.819924] mousedev: PS/2 mouse device common for all mice
[ 9.820178] rtc_cmos 00:04: RTC can wake from S4
[ 9.820436] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 9.820520] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram
[ 9.820638] device-mapper: uevent: version 1.0.3
[ 9.820796] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
[ 9.820823] ledtrig-cpu: registered to indicate activity on CPUs
[ 9.821002] TCP: cubic registered
[ 9.821176] NET: Registered protocol family 10
[ 9.821579] NET: Registered protocol family 17
[ 9.821604] Key type dns_resolver registered
[ 9.822012] mce: Unable to init device /dev/mcelog (rc: -16)
[ 9.822466] Loading compiled-in X.509 certificates
[ 9.824084] Loaded X.509 cert 'Magrathea: Glacier signing key: 4f5c264bf7dc2d8d84bac4178154f75653fe1366'
[ 9.824115] registered taskstats version 1
[ 9.831155] Key type trusted registered
[ 9.833739] Key type encrypted registered
[ 9.835861] AppArmor: AppArmor sha1 policy hashing enabled
[ 9.835864] ima: No TPM chip found, activating TPM-bypass!
[ 9.835884] evm: HMAC attrs: 0x1
[ 9.836516] Magic number: 14:955:385
[ 9.836519] usb usb3: hash matches
[ 9.836524] thermal cooling_device0: hash matches
[ 9.836625] rtc_cmos 00:04: setting system clock to 2014-09-07 15:23:02 UTC (1410103382)
[ 9.836703] BIOS EDD facility v0.16 2004-Jun-25, 7 devices found
[ 9.836988] PM: Hibernation image not present or could not be loaded.
[ 9.837963] Freeing unused kernel memory: 1348K (ffffffff81d29000 - ffffffff81e7a000)
[ 9.837966] Write protecting the kernel read-only data: 12288k
[ 9.844331] Freeing unused kernel memory: 676K (ffff880001757000 - ffff880001800000)
[ 9.844749] Freeing unused kernel memory: 436K (ffff880001b93000 - ffff880001c00000)
[ 9.890659] systemd-udevd[150]: starting version 204
[ 9.933152] md: linear personality registered for level -1
[ 9.936505] md: multipath personality registered for level -4
[ 9.939575] md: raid0 personality registered for level 0
[ 9.943098] md: raid1 personality registered for level 1
[ 9.943246] pps_core: LinuxPPS API ver. 1 registered
[ 9.943248] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 9.944297] PTP clock support registered
[ 9.948223] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 9.948225] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 9.948360] xen: registering gsi 20 triggering 0 polarity 1
[ 9.948377] xen: --> pirq=20 -> irq=20 (gsi=20)
[ 9.948495] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 9.950583] mvsas 0000:09:00.0: mvsas: driver version 0.8.16
[ 9.950612] xen: registering gsi 19 triggering 0 polarity 1
[ 9.950614] Already setup the GSI :19
[ 9.950862] mvsas 0000:09:00.0: mvsas: PCI-E x1, Bandwidth Usage: 5.0 Gbps
[ 10.011705] raid6: sse2x1 9291 MB/s
[ 10.079708] raid6: sse2x2 12971 MB/s
[ 10.099724] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 10.147703] raid6: sse2x4 15350 MB/s
[ 10.147705] raid6: using algorithm sse2x4 (15350 MB/s)
[ 10.147706] raid6: using ssse3x2 recovery algorithm
[ 10.148585] xor: automatically using best checksumming function:
[ 10.187702] avx : 29607.000 MB/sec
[ 10.188490] async_tx: api initialized (async)
[ 10.193873] md: raid6 personality registered for level 6
[ 10.193875] md: raid5 personality registered for level 5
[ 10.193875] md: raid4 personality registered for level 4
[ 10.201416] md: raid10 personality registered for level 10
[ 10.211326] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 10.211328] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 44:8a:5b:81:67:19
[ 10.211329] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 10.211367] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 10.211394] ahci 0000:00:1f.2: version 3.0
[ 10.211488] xen: registering gsi 19 triggering 0 polarity 1
[ 10.211493] Already setup the GSI :19
[ 10.223647] e1000e 0000:00:19.0 em1: renamed from eth0
[ 10.223741] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 10.223743] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ems apst
[ 10.232132] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 10.232135] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 10.232446] hub 1-1:1.0: USB hub found
[ 10.232514] hub 1-1:1.0: 6 ports detected
[ 10.244018] systemd-udevd[152]: renamed network interface eth0 to em1
[ 10.264897] scsi host1: ahci
[ 10.265212] scsi host2: ahci
[ 10.265496] scsi host3: ahci
[ 10.265778] scsi host4: ahci
[ 10.266057] scsi host5: ahci
[ 10.266339] scsi host6: ahci
[ 10.266433] ata1: SATA max UDMA/133 abar m2048@0xf4f25000 port 0xf4f25100 irq 141
[ 10.266436] ata2: SATA max UDMA/133 abar m2048@0xf4f25000 port 0xf4f25180 irq 141
[ 10.266440] ata3: SATA max UDMA/133 abar m2048@0xf4f25000 port 0xf4f25200 irq 141
[ 10.266443] ata4: SATA max UDMA/133 abar m2048@0xf4f25000 port 0xf4f25280 irq 141
[ 10.266446] ata5: SATA max UDMA/133 abar m2048@0xf4f25000 port 0xf4f25300 irq 141
[ 10.266449] ata6: SATA max UDMA/133 abar m2048@0xf4f25000 port 0xf4f25380 irq 141
[ 10.343817] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 10.476138] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 10.476144] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 10.476578] hub 2-1:1.0: USB hub found
[ 10.476636] hub 2-1:1.0: 8 ports detected
[ 10.583785] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 10.583817] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 10.583847] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 10.583876] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 10.583906] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 10.583934] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 10.584158] ata3.00: ATA-8: OCZ-VERTEX PLUS R2, 1.2, max UDMA/133
[ 10.584164] ata3.00: 120817072 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 10.584355] ata3.00: configured for UDMA/133
[ 10.584949] ata6.00: ATA-9: ST2000DM001-1CH164, CC29, max UDMA/133
[ 10.584955] ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 10.585051] ata4.00: ATA-8: ST31500541AS, CC32, max UDMA/133
[ 10.585055] ata4.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 10.585297] ata5.00: ATA-8: ST32000542AS, CC34, max UDMA/133
[ 10.585300] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 10.585838] ata6.00: configured for UDMA/133
[ 10.586447] ata4.00: configured for UDMA/133
[ 10.586693] ata2.00: ATA-9: SSD2SC240G1SA754D117-443, N0307A, max UDMA/133
[ 10.586696] ata2.00: 468862128 sectors, multi 2: LBA48 NCQ (depth 31/32), AA
[ 10.586837] ata1.00: ATA-9: SSD2SC240G1SA754D117-443, N0307A, max UDMA/133
[ 10.586840] ata1.00: 468862128 sectors, multi 2: LBA48 NCQ (depth 31/32), AA
[ 10.586937] ata2.00: configured for UDMA/133
[ 10.586957] ata5.00: configured for UDMA/133
[ 10.587055] ata1.00: configured for UDMA/133
[ 10.587318] scsi 1:0:0:0: Direct-Access ATA SSD2SC240G1SA754 7A PQ: 0 ANSI: 5
[ 10.587927] sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
[ 10.587930] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 10.588396] sd 1:0:0:0: [sda] Write Protect is off
[ 10.588403] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 10.588410] scsi 2:0:0:0: Direct-Access ATA SSD2SC240G1SA754 7A PQ: 0 ANSI: 5
[ 10.588518] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.588893] sd 2:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/223 GiB)
[ 10.589041] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 10.589253] sd 2:0:0:0: [sdb] Write Protect is off
[ 10.589261] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 10.589371] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.589413] scsi 3:0:0:0: Direct-Access ATA OCZ-VERTEX PLUS 1.2 PQ: 0 ANSI: 5
[ 10.589552] sda: sda1
[ 10.589995] sd 3:0:0:0: [sdc] 120817072 512-byte logical blocks: (61.8 GB/57.6 GiB)
[ 10.590010] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 10.590329] scsi 4:0:0:0: Direct-Access ATA ST31500541AS CC32 PQ: 0 ANSI: 5
[ 10.590396] sd 3:0:0:0: [sdc] Write Protect is off
[ 10.590402] sdb: sdb1
[ 10.590404] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 10.590464] sd 1:0:0:0: [sda] Attached SCSI disk
[ 10.590519] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.590938] sd 4:0:0:0: [sdd] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 10.591185] sd 4:0:0:0: [sdd] Write Protect is off
[ 10.591191] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 10.591272] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 10.591276] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.591332] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 10.591577] random: nonblocking pool is initialized
[ 10.591629] scsi 5:0:0:0: Direct-Access ATA ST32000542AS CC34 PQ: 0 ANSI: 5
[ 10.591634] sdc: sdc1
[ 10.592228] sd 5:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 10.592287] sd 5:0:0:0: Attached scsi generic sg4 type 0
[ 10.592474] sd 5:0:0:0: [sde] Write Protect is off
[ 10.592481] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 10.592555] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 10.592604] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.592636] scsi 6:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC29 PQ: 0 ANSI: 5
[ 10.593095] sd 6:0:0:0: Attached scsi generic sg5 type 0
[ 10.593111] sd 6:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 10.593117] sd 6:0:0:0: [sdf] 4096-byte physical blocks
[ 10.593402] sd 6:0:0:0: [sdf] Write Protect is off
[ 10.593407] sd 6:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 10.593509] sd 6:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.606536] sdf: unknown partition table
[ 10.607109] sd 6:0:0:0: [sdf] Attached SCSI disk
[ 10.640754] sdd: sdd1
[ 10.640965] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 10.698832] sde:
[ 10.699018] sd 5:0:0:0: [sde] Attached SCSI disk
[ 10.737077] md: bind<sde>
[ 10.747773] usb 2-1.2: new low-speed USB device number 3 using ehci-pci
[ 10.751908] md: bind<sdf>
[ 10.805183] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 10.858691] usb 2-1.2: New USB device found, idVendor=04f2, idProduct=0408
[ 10.858700] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 10.858706] usb 2-1.2: Product: USB Keyboard
[ 10.858711] usb 2-1.2: Manufacturer: Chicony
[ 11.731751] Clocksource tsc unstable (delta = 187612750415 ns)
[ 17.086900] scsi host0: mvsas
[ 17.087317] sas: phy-0:0 added to port-0:0, phy_mask:0x1 ( 0)
[ 17.087333] sas: phy-0:1 added to port-0:1, phy_mask:0x2 ( 100000000000000)
[ 17.087349] sas: phy-0:2 added to port-0:2, phy_mask:0x4 ( 200000000000000)
[ 17.087364] sas: phy-0:3 added to port-0:3, phy_mask:0x8 ( 300000000000000)
[ 17.087379] sas: phy-0:4 added to port-0:4, phy_mask:0x1 ( 400000000000000)
[ 17.087394] sas: phy-0:5 added to port-0:5, phy_mask:0x2 ( 500000000000000)
[ 17.087409] sas: phy-0:6 added to port-0:6, phy_mask:0x4 ( 600000000000000)
[ 17.087424] sas: phy-0:7 added to port-0:7, phy_mask:0x8 ( 700000000000000)
[ 17.087439] sas: DOING DISCOVERY on port 0, pid:223
[ 17.087444] sas: DONE DISCOVERY on port 0, pid:223, result:0
[ 17.087448] sas: DOING DISCOVERY on port 1, pid:223
[ 17.087451] sas: DONE DISCOVERY on port 1, pid:223, result:0
[ 17.087454] sas: DOING DISCOVERY on port 2, pid:223
[ 17.087456] sas: DONE DISCOVERY on port 2, pid:223, result:0
[ 17.087459] sas: DOING DISCOVERY on port 3, pid:223
[ 17.087461] sas: DONE DISCOVERY on port 3, pid:223, result:0
[ 17.087464] sas: DOING DISCOVERY on port 4, pid:223
[ 17.087466] sas: DONE DISCOVERY on port 4, pid:223, result:0
[ 17.087470] sas: DOING DISCOVERY on port 5, pid:223
[ 17.087472] sas: DONE DISCOVERY on port 5, pid:223, result:0
[ 17.087475] sas: DOING DISCOVERY on port 6, pid:223
[ 17.087477] sas: DONE DISCOVERY on port 6, pid:223, result:0
[ 17.087480] sas: DOING DISCOVERY on port 7, pid:223
[ 17.087482] sas: DONE DISCOVERY on port 7, pid:223, result:0
[ 17.087496] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 17.087506] sas: ata7: end_device-0:0: dev error handler
[ 17.241101] ata7.00: ATA-8: ST32000542AS, CC34, max UDMA/133
[ 17.241107] ata7.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 17.242580] ata7.00: configured for UDMA/133
[ 17.242678] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 17.256264] scsi 0:0:0:0: Direct-Access ATA ST32000542AS CC34 PQ: 0 ANSI: 5
[ 17.256486] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 17.256531] sas: ata7: end_device-0:0: dev error handler
[ 17.256547] sas: ata8: end_device-0:1: dev error handler
[ 17.412567] ata8.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133
[ 17.412573] ata8.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 17.413463] ata8.00: configured for UDMA/133
[ 17.413556] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 17.428215] scsi 0:0:1:0: Direct-Access ATA ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5
[ 17.428479] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 17.428520] sas: ata7: end_device-0:0: dev error handler
[ 17.428539] sas: ata8: end_device-0:1: dev error handler
[ 17.428550] sas: ata9: end_device-0:2: dev error handler
[ 17.587393] ata9.00: ATA-8: ST2000DL003-9VT166, CC3C, max UDMA/133
[ 17.587399] ata9.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 17.588326] ata9.00: configured for UDMA/133
[ 17.588425] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 17.604276] scsi 0:0:2:0: Direct-Access ATA ST2000DL003-9VT1 CC3C PQ: 0 ANSI: 5
[ 17.604496] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 17.604534] sas: ata7: end_device-0:0: dev error handler
[ 17.604569] sas: ata8: end_device-0:1: dev error handler
[ 17.604571] sas: ata9: end_device-0:2: dev error handler
[ 17.604585] sas: ata10: end_device-0:3: dev error handler
[ 17.761114] ata10.00: ATA-8: ST32000542AS, CC34, max UDMA/133
[ 17.761120] ata10.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 17.762586] ata10.00: configured for UDMA/133
[ 17.762682] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 17.776247] scsi 0:0:3:0: Direct-Access ATA ST32000542AS CC34 PQ: 0 ANSI: 5
[ 17.776514] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 17.776556] sas: ata7: end_device-0:0: dev error handler
[ 17.776591] sas: ata8: end_device-0:1: dev error handler
[ 17.776594] sas: ata9: end_device-0:2: dev error handler
[ 17.776616] sas: ata10: end_device-0:3: dev error handler
[ 17.776619] sas: ata11: end_device-0:4: dev error handler
[ 17.932481] ata11.00: ATA-9: ST2000DM001-1CH164, CC29, max UDMA/133
[ 17.932485] ata11.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 17.933204] ata11.00: configured for UDMA/133
[ 17.933246] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 17.933671] scsi 0:0:4:0: Direct-Access ATA ST2000DM001-1CH1 CC29 PQ: 0 ANSI: 5
[ 17.933918] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 17.933958] sas: ata7: end_device-0:0: dev error handler
[ 17.933977] sas: ata8: end_device-0:1: dev error handler
[ 17.933990] sas: ata9: end_device-0:2: dev error handler
[ 17.933994] sas: ata10: end_device-0:3: dev error handler
[ 17.934005] sas: ata11: end_device-0:4: dev error handler
[ 17.934008] sas: ata12: end_device-0:5: dev error handler
[ 18.089169] ata12.00: ATA-8: ST31500541AS, CC32, max UDMA/133
[ 18.089175] ata12.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 18.090988] ata12.00: configured for UDMA/133
[ 18.091086] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 18.104244] scsi 0:0:5:0: Direct-Access ATA ST31500541AS CC32 PQ: 0 ANSI: 5
[ 18.104520] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 18.104558] sas: ata7: end_device-0:0: dev error handler
[ 18.104583] sas: ata8: end_device-0:1: dev error handler
[ 18.104585] sas: ata9: end_device-0:2: dev error handler
[ 18.104590] sas: ata10: end_device-0:3: dev error handler
[ 18.104600] sas: ata11: end_device-0:4: dev error handler
[ 18.104604] sas: ata12: end_device-0:5: dev error handler
[ 18.104607] sas: ata13: end_device-0:6: dev error handler
[ 18.260734] ata13.00: ATA-9: ST2000DM001-1CH164, CC29, max UDMA/133
[ 18.260740] ata13.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 18.261558] ata13.00: configured for UDMA/133
[ 18.261654] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 18.276303] scsi 0:0:6:0: Direct-Access ATA ST2000DM001-1CH1 CC29 PQ: 0 ANSI: 5
[ 18.276678] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 18.276735] sas: ata7: end_device-0:0: dev error handler
[ 18.276757] sas: ata8: end_device-0:1: dev error handler
[ 18.276764] sas: ata9: end_device-0:2: dev error handler
[ 18.276773] sas: ata10: end_device-0:3: dev error handler
[ 18.276776] sas: ata11: end_device-0:4: dev error handler
[ 18.276793] sas: ata12: end_device-0:5: dev error handler
[ 18.276796] sas: ata13: end_device-0:6: dev error handler
[ 18.276798] sas: ata14: end_device-0:7: dev error handler
[ 18.432688] ata14.00: ATA-8: ST2000DL001-9VT156, CC41, max UDMA/133
[ 18.432694] ata14.00: 3907029168 sectors, multi 0: LBA48
[ 18.433681] ata14.00: configured for UDMA/133
[ 18.433732] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 18.434170] scsi 0:0:7:0: Direct-Access ATA ST2000DL001-9VT1 CC41 PQ: 0 ANSI: 5
[ 18.434741] sd 0:0:0:0: [sdg] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 18.434822] sd 0:0:0:0: Attached scsi generic sg6 type 0
[ 18.435018] sd 0:0:0:0: [sdg] Write Protect is off
[ 18.435025] sd 0:0:0:0: [sdg] Mode Sense: 00 3a 00 00
[ 18.435141] sd 0:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 18.435233] sd 0:0:1:0: [sdh] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 18.435332] sd 0:0:1:0: Attached scsi generic sg7 type 0
[ 18.435465] sd 0:0:1:0: [sdh] Write Protect is off
[ 18.435472] sd 0:0:1:0: [sdh] Mode Sense: 00 3a 00 00
[ 18.435590] sd 0:0:1:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 18.435740] sd 0:0:2:0: [sdi] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 18.435745] sd 0:0:2:0: [sdi] 4096-byte physical blocks
[ 18.435800] sd 0:0:2:0: Attached scsi generic sg8 type 0
[ 18.435989] sd 0:0:2:0: [sdi] Write Protect is off
[ 18.435996] sd 0:0:2:0: [sdi] Mode Sense: 00 3a 00 00
[ 18.436105] sd 0:0:2:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 18.436217] sd 0:0:3:0: [sdj] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 18.436285] sd 0:0:3:0: Attached scsi generic sg9 type 0
[ 18.436463] sd 0:0:3:0: [sdj] Write Protect is off
[ 18.436469] sd 0:0:3:0: [sdj] Mode Sense: 00 3a 00 00
[ 18.436580] sd 0:0:3:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 18.436732] sd 0:0:4:0: [sdk] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 18.436736] sd 0:0:4:0: [sdk] 4096-byte physical blocks
[ 18.436782] sd 0:0:4:0: Attached scsi generic sg10 type 0
[ 18.436989] sd 0:0:4:0: [sdk] Write Protect is off
[ 18.436994] sd 0:0:4:0: [sdk] Mode Sense: 00 3a 00 00
[ 18.437102] sd 0:0:4:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 18.437162] sd 0:0:5:0: [sdl] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 18.437245] sd 0:0:5:0: Attached scsi generic sg11 type 0
[ 18.437464] sd 0:0:5:0: [sdl] Write Protect is off
[ 18.437471] sd 0:0:5:0: [sdl] Mode Sense: 00 3a 00 00
[ 18.437589] sd 0:0:5:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 18.437750] sd 0:0:6:0: Attached scsi generic sg12 type 0
[ 18.437755] sd 0:0:6:0: [sdm] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 18.437759] sd 0:0:6:0: [sdm] 4096-byte physical blocks
[ 18.438016] sd 0:0:6:0: [sdm] Write Protect is off
[ 18.438021] sd 0:0:6:0: [sdm] Mode Sense: 00 3a 00 00
[ 18.438117] sd 0:0:6:0: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 18.438243] sd 0:0:7:0: Attached scsi generic sg13 type 0
[ 18.438291] sd 0:0:7:0: [sdn] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 18.438296] sd 0:0:7:0: [sdn] 4096-byte physical blocks
[ 18.438562] sd 0:0:7:0: [sdn] Write Protect is off
[ 18.438568] sd 0:0:7:0: [sdn] Mode Sense: 00 3a 00 00
[ 18.438682] sd 0:0:7:0: [sdn] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 18.449583] sdg: unknown partition table
[ 18.450217] sd 0:0:0:0: [sdg] Attached SCSI disk
[ 18.454141] sdj:
[ 18.454796] sd 0:0:3:0: [sdj] Attached SCSI disk
[ 18.455359] sdi: unknown partition table
[ 18.455964] sd 0:0:2:0: [sdi] Attached SCSI disk
[ 18.456508] sdm: unknown partition table
[ 18.457075] sd 0:0:6:0: [sdm] Attached SCSI disk
[ 18.460928] sdh: unknown partition table
[ 18.461516] sd 0:0:1:0: [sdh] Attached SCSI disk
[ 18.462789] sdk: unknown partition table
[ 18.463368] sd 0:0:4:0: [sdk] Attached SCSI disk
[ 18.467198] sdn: unknown partition table
[ 18.467801] sd 0:0:7:0: [sdn] Attached SCSI disk
[ 18.488503] sdl: sdl1
[ 18.489242] sd 0:0:5:0: [sdl] Attached SCSI disk
[ 18.828340] init: plymouth-upstart-bridge main process (265) terminated with status 1
[ 18.828387] init: plymouth-upstart-bridge main process ended, respawning
[ 18.854133] init: plymouth-upstart-bridge main process (275) terminated with status 1
[ 18.854170] init: plymouth-upstart-bridge main process ended, respawning
[ 18.871831] init: plymouth-upstart-bridge main process (278) terminated with status 1
[ 18.871895] init: plymouth-upstart-bridge main process ended, respawning
[ 18.884396] init: ureadahead main process (268) terminated with status 5
[ 19.225556] systemd-udevd[400]: starting version 204
[ 19.302434] lp: driver loaded but no devices found
[ 19.510157] wmi: Mapper loaded
[ 19.511101] EDAC MC: Ver: 3.0.0
[ 19.511473] EXT4-fs (sdc1): re-mounted. Opts: discard,errors=remount-ro
[ 19.511877] e1000e 0000:00:19.0 eth0: renamed from em1
[ 19.515640] EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:0ea0
[ 19.515649] EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:0ea0
[ 19.515652] EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:0ea8
[ 19.515656] EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:0ea8
[ 19.515657] EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:0e71
[ 19.515661] EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:0e71
[ 19.515663] EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:0eaa
[ 19.515667] EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:0eaa
[ 19.515668] EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:0eab
[ 19.515672] EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:0eab
[ 19.515673] EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:0eac
[ 19.515677] EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:0eac
[ 19.515679] EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:0ead
[ 19.515683] EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:0ead
[ 19.515684] EDAC sbridge: Seeking for: dev 16.0 PCI ID 8086:0ec8
[ 19.515688] EDAC sbridge: Seeking for: dev 16.0 PCI ID 8086:0ec8
[ 19.515689] EDAC sbridge: Seeking for: dev 16.1 PCI ID 8086:0ec9
[ 19.515693] EDAC sbridge: Seeking for: dev 16.1 PCI ID 8086:0ec9
[ 19.515694] EDAC sbridge: Seeking for: dev 16.2 PCI ID 8086:0eca
[ 19.515710] EDAC sbridge: Seeking for: dev 16.2 PCI ID 8086:0eca
[ 19.515711] EDAC sbridge: Seeking for: dev 1c.0 PCI ID 8086:0e60
[ 19.515715] EDAC sbridge: Seeking for: dev 1d.2 PCI ID 8086:0e6a
[ 19.515718] EDAC sbridge: Seeking for: dev 1d.3 PCI ID 8086:0e6b
[ 19.515721] EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:0eb8
[ 19.515724] EDAC sbridge: Seeking for: dev 11.4 PCI ID 8086:0ebc
[ 19.515729] EDAC sbridge: ECC is disabled. Aborting
[ 19.515787] EDAC sbridge: Couldn't find mci handler
[ 19.544504] xen: registering gsi 16 triggering 0 polarity 1
[ 19.544513] Already setup the GSI :16
[ 19.550012] systemd-udevd[421]: renamed network interface em1 to eth0
[ 19.565535] xen: registering gsi 22 triggering 0 polarity 1
[ 19.565552] xen: --> pirq=22 -> irq=22 (gsi=22)
[ 19.565659] xen: registering gsi 18 triggering 0 polarity 1
[ 19.565662] Already setup the GSI :18
[ 19.565677] snd_hda_intel 0000:08:00.1: Handle VGA-switcheroo audio client
[ 19.580173] [drm] Initialized drm 1.1.0 20060810
[ 19.593487] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.5/0000:08:00.1/sound/card1/input5
[ 19.595560] sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 19.595562] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 19.595564] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 19.595565] sound hdaudioC0D0: mono: mono_out=0x0
[ 19.595567] sound hdaudioC0D0: dig-out=0x1e/0x0
[ 19.595568] sound hdaudioC0D0: inputs:
[ 19.595570] sound hdaudioC0D0: Front Mic=0x19
[ 19.595572] sound hdaudioC0D0: Rear Mic=0x18
[ 19.595575] sound hdaudioC0D0: Line=0x1a
[ 19.602253] md: bind<sdi>
[ 19.611037] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 19.611192] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 19.611282] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 19.611385] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 19.611477] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 19.611565] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 19.611654] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 19.611782] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 19.626006] md: bind<sdg>
[ 19.632592] md: bind<sdn>
[ 19.633456] AVX version of gcm_enc/dec engaged.
[ 19.633457] AES CTR mode by8 optimization enabled
[ 19.639733] sas: Enter sas_scsi_recover_host busy: 1 failed: 1
[ 19.639737] sas: ata9: end_device-0:2: cmd error handler
[ 19.639746] sas: ata7: end_device-0:0: dev error handler
[ 19.639755] sas: ata8: end_device-0:1: dev error handler
[ 19.639757] sas: ata9: end_device-0:2: dev error handler
[ 19.639766] sas: ata10: end_device-0:3: dev error handler
[ 19.639769] sas: ata11: end_device-0:4: dev error handler
[ 19.639773] sas: ata12: end_device-0:5: dev error handler
[ 19.639775] sas: ata13: end_device-0:6: dev error handler
[ 19.639777] sas: ata14: end_device-0:7: dev error handler
[ 19.639782] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 19.640924] hidraw: raw HID events driver (C) Jiri Kosina
[ 19.653371] md: bind<sdm>
[ 19.658131] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
[ 19.660263] md: bind<sdh>
[ 19.667444] [drm] radeon kernel modesetting enabled.
[ 19.667614] xen: registering gsi 17 triggering 0 polarity 1
[ 19.667620] Already setup the GSI :17
[ 19.668687] [drm] initializing kernel modesetting (RV710 0x1002:0x954F 0x1043:0x02A8).
[ 19.668714] [drm] register mmio base: 0xF4C20000
[ 19.668715] [drm] register mmio size: 65536
[ 19.668843] ATOM BIOS:
[ 19.668886] radeon 0000:08:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 19.668888] radeon 0000:08:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 19.668891] Failed to add WC MTRR for [00000000e0000000-00000000efffffff]; performance may suffer.
[ 19.668892] [drm] Detected VRAM RAM=512M, BAR=256M
[ 19.668893] [drm] RAM width 64bits DDR
[ 19.669125] md: bind<sdk>
[ 19.669549] audit: type=1400 audit(1410103392.328:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=599 comm="apparmor_parser"
[ 19.669554] audit: type=1400 audit(1410103392.328:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=599 comm="apparmor_parser"
[ 19.669556] audit: type=1400 audit(1410103392.328:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=599 comm="apparmor_parser"
[ 19.669854] audit: type=1400 audit(1410103392.328:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=599 comm="apparmor_parser"
[ 19.669859] audit: type=1400 audit(1410103392.328:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=599 comm="apparmor_parser"
[ 19.670015] audit: type=1400 audit(1410103392.328:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=599 comm="apparmor_parser"
[ 19.671217] usbcore: registered new interface driver usbhid
[ 19.671219] usbhid: USB HID core driver
[ 19.672643] [TTM] Zone kernel: Available graphics memory: 32318318 kiB
[ 19.672645] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 19.672646] [TTM] Initializing pool allocator
[ 19.672653] [TTM] Initializing DMA pool allocator
[ 19.672671] [drm] radeon: 512M of VRAM memory ready
[ 19.672672] [drm] radeon: 1024M of GTT memory ready.
[ 19.672686] [drm] Loading RV710 Microcode
[ 19.676655] md: bind<sdj>
[ 19.680570] md: kicking non-fresh sdk from array!
[ 19.680578] md: unbind<sdk>
[ 19.682208] [drm] Internal thermal controller without fan control
[ 19.685677] [drm] radeon: dpm initialized
[ 19.686895] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 19.687763] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 19.693187] sas: Enter sas_scsi_recover_host busy: 2 failed: 2
[ 19.693193] sas: ata14: end_device-0:7: cmd error handler
[ 19.693196] sas: ata8: end_device-0:1: cmd error handler
[ 19.693211] sas: ata7: end_device-0:0: dev error handler
[ 19.693223] sas: ata8: end_device-0:1: dev error handler
[ 19.693237] sas: ata9: end_device-0:2: dev error handler
[ 19.693241] sas: ata10: end_device-0:3: dev error handler
[ 19.693245] sas: ata11: end_device-0:4: dev error handler
[ 19.693250] sas: ata12: end_device-0:5: dev error handler
[ 19.693253] sas: ata13: end_device-0:6: dev error handler
[ 19.693258] sas: ata14: end_device-0:7: dev error handler
[ 19.693270] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 19.697631] [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
[ 19.697698] radeon 0000:08:00.0: WB enabled
[ 19.697700] radeon 0000:08:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff880f958b6c00
[ 19.697701] radeon 0000:08:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff880f958b6c0c
[ 19.699810] sas: Enter sas_scsi_recover_host busy: 1 failed: 1
[ 19.699813] sas: ata8: end_device-0:1: cmd error handler
[ 19.699828] sas: ata7: end_device-0:0: dev error handler
[ 19.699836] sas: ata8: end_device-0:1: dev error handler
[ 19.699847] sas: ata9: end_device-0:2: dev error handler
[ 19.699854] sas: ata10: end_device-0:3: dev error handler
[ 19.699857] sas: ata11: end_device-0:4: dev error handler
[ 19.699860] sas: ata12: end_device-0:5: dev error handler
[ 19.699863] sas: ata13: end_device-0:6: dev error handler
[ 19.699867] sas: ata14: end_device-0:7: dev error handler
[ 19.699883] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 19.707774] sas: Enter sas_scsi_recover_host busy: 1 failed: 1
[ 19.707777] sas: ata8: end_device-0:1: cmd error handler
[ 19.707791] sas: ata7: end_device-0:0: dev error handler
[ 19.707800] sas: ata8: end_device-0:1: dev error handler
[ 19.707812] sas: ata9: end_device-0:2: dev error handler
[ 19.707818] sas: ata10: end_device-0:3: dev error handler
[ 19.707821] sas: ata11: end_device-0:4: dev error handler
[ 19.707827] sas: ata12: end_device-0:5: dev error handler
[ 19.707830] sas: ata13: end_device-0:6: dev error handler
[ 19.707836] sas: ata14: end_device-0:7: dev error handler
[ 19.707846] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[ 19.742072] input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:04F2:0408.0001/input/input14
[ 19.742249] hid-generic 0003:04F2:0408.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony USB Keyboard] on usb-0000:00:1d.0-1.2/input0
[ 19.748594] input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:04F2:0408.0002/input/input15
[ 19.748758] hid-generic 0003:04F2:0408.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Chicony USB Keyboard] on usb-0000:00:1d.0-1.2/input1
[ 19.878102] EXT4-fs (sdl1): mounted filesystem with ordered data mode. Opts: (null)
[ 19.924402] radeon 0000:08:00.0: fence driver on ring 5 use gpu addr 0x000000000005c598 and cpu addr 0xffffc90016e1c598
[ 19.924404] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 19.924405] [drm] Driver supports precise vblank timestamp query.
[ 19.924482] radeon 0000:08:00.0: radeon: using MSI.
[ 19.924528] [drm] radeon: irq initialized.
[ 19.943821] md: export_rdev(sdk)
[ 19.943834] md: kicking non-fresh sde from array!
[ 19.943838] md: unbind<sde>
[ 19.971237] [drm] ring test on 0 succeeded in 1 usecs
[ 19.971300] [drm] ring test on 3 succeeded in 1 usecs
[ 19.975871] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.021535] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
[ 20.154182] [drm] ring test on 5 succeeded in 1 usecs
[ 20.154193] [drm] UVD initialized successfully.
[ 20.154516] [drm] ib test on ring 0 succeeded in 0 usecs
[ 20.154557] [drm] ib test on ring 3 succeeded in 0 usecs
[ 20.304069] [drm] ib test on ring 5 succeeded
[ 20.304359] [drm] Radeon Display Connectors
[ 20.304360] [drm] Connector 0:
[ 20.304361] [drm] VGA-1
[ 20.304362] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 20.304362] [drm] Encoders:
[ 20.304363] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 20.304363] [drm] Connector 1:
[ 20.304364] [drm] HDMI-A-1
[ 20.304365] [drm] HPD1
[ 20.304365] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 20.304366] [drm] Encoders:
[ 20.304367] [drm] DFP1: INTERNAL_UNIPHY
[ 20.304367] [drm] Connector 2:
[ 20.304368] [drm] DVI-I-1
[ 20.304369] [drm] HPD4
[ 20.304369] [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[ 20.304370] [drm] Encoders:
[ 20.304371] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 20.304371] [drm] DFP2: INTERNAL_UNIPHY2
[ 20.351917] md: export_rdev(sde)
[ 20.353382] md/raid:md0: device sdj operational as raid disk 3
[ 20.353383] md/raid:md0: device sdh operational as raid disk 1
[ 20.353384] md/raid:md0: device sdm operational as raid disk 6
[ 20.353385] md/raid:md0: device sdn operational as raid disk 7
[ 20.353386] md/raid:md0: device sdg operational as raid disk 0
[ 20.353387] md/raid:md0: device sdi operational as raid disk 2
[ 20.353388] md/raid:md0: device sdf operational as raid disk 4
[ 20.353687] md/raid:md0: allocated 0kB
[ 20.353721] md/raid:md0: raid level 6 active with 7 out of 8 devices, algorithm 2
[ 20.353811] RAID conf printout:
[ 20.353813] --- level:6 rd:8 wd:7
[ 20.353815] disk 0, o:1, dev:sdg
[ 20.353817] disk 1, o:1, dev:sdh
[ 20.353819] disk 2, o:1, dev:sdi
[ 20.353821] disk 3, o:1, dev:sdj
[ 20.353823] disk 4, o:1, dev:sdf
[ 20.353825] disk 6, o:1, dev:sdm
[ 20.353827] disk 7, o:1, dev:sdn
[ 20.353890] md0: detected capacity change from 0 to 12001584611328
[ 20.388859] md0: unknown partition table
[ 20.673542] [drm] fb mappable at 0xE045E000
[ 20.673544] [drm] vram apper at 0xE0000000
[ 20.673545] [drm] size 3145728
[ 20.673545] [drm] fb depth is 24
[ 20.673546] [drm] pitch is 4096
[ 20.673637] fbcon: radeondrmfb (fb0) is primary device
[ 20.773162] Console: switching to colour frame buffer device 128x48
[ 20.849739] radeon 0000:08:00.0: fb0: radeondrmfb frame buffer device
[ 20.849740] radeon 0000:08:00.0: registered panic notifier
[ 20.867888] [drm] Initialized radeon 2.40.0 20080528 for 0000:08:00.0 on minor 0
[ 21.218806] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[ 21.275554] FS-Cache: Loaded
[ 21.285717] RPC: Registered named UNIX socket transport module.
[ 21.285719] RPC: Registered udp transport module.
[ 21.285719] RPC: Registered tcp transport module.
[ 21.285720] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 21.308526] Bridge firewalling registered
[ 21.309727] FS-Cache: Netfs 'nfs' registered for caching
[ 21.313778] device eth0 entered promiscuous mode
[ 21.316305] IPv6: ADDRCONF(NETDEV_UP): xenbr0: link is not ready
[ 21.341772] Installing knfsd (copyright (C) 1996 [email protected]).
[ 21.755739] init: samba-ad-dc main process (1191) terminated with status 1
[ 23.909013] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 23.909060] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 23.909093] xenbr0: port 1(eth0) entered forwarding state
[ 23.909101] xenbr0: port 1(eth0) entered forwarding state
[ 23.909161] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready
[ 24.292692] init: failsafe main process (1090) killed by TERM signal
[ 24.361030] audit: type=1400 audit(1410103397.020:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1457 comm="apparmor_parser"
[ 24.361044] audit: type=1400 audit(1410103397.020:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1457 comm="apparmor_parser"
[ 24.361051] audit: type=1400 audit(1410103397.020:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1457 comm="apparmor_parser"
[ 24.361757] audit: type=1400 audit(1410103397.020:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1457 comm="apparmor_parser"
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment