invisiblek · May 26, 2016 01:47
diff --git a/dmesg b/dmesg
 [    0.000000] Booting Linux on physical CPU 0
 [    0.000000] Initializing cgroup subsys cpu
 [    0.000000] Linux version 3.4.112-cyanogenmod-g5a7de5b-25659-g2380876-dirty (dp@build-vm) (gcc version 4.9.x-google 20140827 (prerelease) (GCC) ) #1 SMP PREEMPT Wed May 25 20:25:10 CDT 2016
 [    0.000000] CPU: ARMv7 Processor [511f04d0] revision 0 (ARMv7), cr=10c5387d
 [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
 [    0.000000] Machine: SAMSUNG M2
 [    0.000000] Truncating memory at 0xc0000000 to fit in 32-bit physical address space
 [    0.000000] mem_map: fixed_low_area reserved at 0xafe00000 with size 				0x300000
 [    0.000000] mem_map: fixed_middle_area reserved at 0xb0100000 with 				size 0x6000000
 [    0.000000] mem_map: fixed_high_area reserved at 0xb6100000 with size 				0x100000
 [    0.000000] memory pool 3 (start ff000000 size f00000) initialized
 [    0.000000] Initialized persistent memory from bff00000-bfffffff
 [    0.000000] Memory policy: ECC disabled, Data cache writealloc
 [    0.000000] smem_find(137, 80): wrong size 72
 [    0.000000] socinfo_init: v6, id=87, ver=3.1, raw_id=1713, raw_ver=4, hw_plat=1,  hw_plat_ver=65536
 [    0.000000]  accessory_chip=0 hw_plat_subtype=0
 [    0.000000] On node 0 totalpages: 466175
 [    0.000000] free_area_init_node: node 0, pgdat c0d18640, node_mem_map c15de000
 [    0.000000]   Normal zone: 1740 pages used for memmap
 [    0.000000]   Normal zone: 0 pages reserved
 [    0.000000]   Normal zone: 167220 pages, LIFO batch:31
 [    0.000000]   HighMem zone: 2352 pages used for memmap
 [    0.000000]   HighMem zone: 294863 pages, LIFO batch:31
 [    0.000000] allocating 11304960 bytes at c25e4000 (827e4000 physical) for fb
 [    0.000000] PERCPU: Embedded 8 pages/cpu @c30af000 s16512 r0 d16256 u32768
 [    0.000000] pcpu-alloc: s16512 r0 d16256 u32768 alloc=8*4096
 [    0.000000] pcpu-alloc: [0] 0 [0] 1 
 [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 462083
 [    0.000000] Kernel command line: androidboot.hardware=qcom user_debug=31 zcache androidboot.selinux=permissive sec_log=0x80000@0x88d00008 sec_dbg=0x40000@0x88d90004 sec_debug.reset_reason=0x1a2b3c00 etb_buf=0x4000@0x8fffb9c0 androidboot.debug_level=0x4f4c sec_debug.enable=0 sec_debug.enable_user=0 cordon=e581c8d87ef55dda328da122ded6852d loglevel=4 samsung.hardware=SCH-I535 androidboot.emmc_checksum=3 androidboot.bootloader=I535VRALE6 androidboot.nvdata_backup=1 androidboot.boot_recovery=0 level=0x574f4c44 androidboot.emmc=true androidboot.serialno=3600f491 androidboot.baseband=msm
 [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
 [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
 [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
 [    0.000000] Memory: 139MB 5MB 510MB 1166MB 0MB = 1820MB total
 [    0.000000] Memory: 1818760k/1818760k available, 163700k reserved, 1187836K highmem
 [    0.000000] Virtual kernel memory layout:
 [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
 [    0.000000]     timers  : 0xfffef000 - 0xffff0000   (   4 kB)
 [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
 [    0.000000] 	   vmalloc : 0xf6800000 - 0xff000000   ( 136 MB)
 [    0.000000] 	    lowmem : 0xcfe00000 - 0xf6600000   ( 616 MB)
 [    0.000000] 	   vmalloc : 0xcf500000 - 0xcfe00000   (   9 MB)
 [    0.000000] 	    lowmem : 0xcf000000 - 0xcf500000   (   5 MB)
 [    0.000000] 	   vmalloc : 0xc8b00000 - 0xcf000000   ( 101 MB)
 [    0.000000] 	    lowmem : 0xc0000000 - 0xc8b00000   ( 139 MB)
 [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
 [    0.000000]       .text : 0xc0008000 - 0xc0c38154   (12481 kB)
 [    0.000000]       .init : 0xc0c39000 - 0xc0c99080   ( 385 kB)
 [    0.000000]       .data : 0xc0c9a000 - 0xc0d1e320   ( 529 kB)
 [    0.000000]        .bss : 0xc0deffa0 - 0xc1023f34   (2256 kB)
 [    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-0, MinObjects=0, CPUs=2, Nodes=1
 [    0.000000] Preemptible hierarchical RCU implementation.
 [    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
 [    0.000000] NR_IRQS:921
 [    0.000000] sched_clock: 32 bits at 32kHz, resolution 30520ns, wraps every 131084001ms
 [    0.000000] Switching to timer-based delay loop
 [    0.000000] Console: colour dummy device 80x30
 [    0.000213] Calibrating delay loop (skipped), value calculated using timer frequency.. 13.50 BogoMIPS (lpj=67500)
 [    0.000244] pid_max: default: 32768 minimum: 301
 [    0.000457] Security Framework initialized
 [    0.000488] SELinux:  Initializing.
 [    0.000579] SELinux:  Starting in permissive mode
 [    0.000671] Mount-cache hash table entries: 512
 [    0.001770] Initializing cgroup subsys debug
 [    0.001770] Initializing cgroup subsys cpuacct
 [    0.001800] Initializing cgroup subsys freezer
 [    0.001800] Initializing cgroup subsys bfqio
 [    0.001861] CPU: Testing write buffer coherency: ok
 [    0.002166] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
 [    0.002197] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
 [    0.002289] Setting up static identity map for 0x80bdc518 - 0x80bdc5a0
 [    0.005188] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
 [    0.005341] Brought up 2 CPUs
 [    0.005371] SMP: Total of 2 processors activated (27.00 BogoMIPS).
 [    0.020540] VFP support v0.3: implementor 51 architecture 64 part 4d variant 1 rev 0
 [    0.021699] dummy: 
 [    0.022188] NET: Registered protocol family 16
 [    0.023653] DMA: preallocated 256 KiB pool for atomic coherent allocations
 [    0.023805] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
 [    0.026216] meminfo_init: smem ram ptable found: ver: 0 len: 6
 [    0.026247] Found 2 memory banks grouped into 16 memory regions
 [    0.026461] gpiochip_add: registered GPIOs 0 to 151 on device: msmgpio
 [    0.027010] msm_rpm_init: RPM firmware 3.0.16844036
 [    0.056004] msm_rpm_get_status(): Status id 433 not defined for target
 [    0.056004] msm_rpm_get_status(): Status id 433 not defined for target
 [    0.056035] msm_rpm_get_status(): Status id 433 not defined for target
 [    0.056035] msm_rpm_get_status(): Status id 433 not defined for target
 [    0.056065] msm_rpm_get_status(): Status id 433 not defined for target
 [    0.056065] msm_rpm_get_status(): Status id 433 not defined for target
 [    0.056096] msm_rpm_get_status(): Status id 433 not defined for target
 [    0.056096] msm_rpm_get_status(): Status id 433 not defined for target
 [    0.075995] msm_gpiomux_install: write failure: -14
 [    0.076026] msm_gpiomux_install: write failure: -14
 [    0.076026] msm_gpiomux_install: write failure: -14
 [    0.076056] msm_gpiomux_install: write failure: -14
 [    0.076423] persistent_ram: found existing buffer, size 4608, start 4608
 [    0.092110] console [ram0] enabled
 [    0.094552] saw_probe: id=0, name=8921_s5
 [    0.094948] saw_probe: id=1, name=8921_s6
 [    0.095315] gpio_vreg_probe: id=202, name=ext_5v, gpio=202, gpio_label=ext_5v_en
 [    0.095559] pm8921_probe: PMIC revision 1: F4
 [    0.095589] pm8921_probe: PMIC revision 2: 06
 [    0.095620] pm8921_probe: PMIC version: PM8921 rev 3.0
 [    0.095620] pm8921_probe: PMIC Restart Reason: Triggered from KPD (power key press)
 [    0.096871] gpiochip_add: registered GPIOs 152 to 195 on device: pm-gpio
 [    0.097359] pm_gpio_probe: OK: base=152, ngpio=44
 [    0.097573] gpiochip_add: registered GPIOs 196 to 207 on device: pm8xxx-mpp
 [    0.097665] pm8xxx_mpp_probe: OK: base=196, ngpio=12
 [    0.103006] gpio_vreg_probe: id=193, name=ext_otg_sw, gpio=193, gpio_label=ext_otg_sw_en
 [    0.111979] [msm8960_init_cam:1558]setting done!!
 [    0.113291] samsung sys class init.
 [    0.113322] samsung sys class end.
 [    0.113352] 8921_lvs6: Failed to create debugfs directory
 [    0.113932] tsp 1.8V on is finished.
 [    0.113963] 8921_l17: Failed to create debugfs directory
 [    0.114787] tsp 3.3V on is finished.
 [    0.114878] 8921_l9: Failed to create debugfs directory
 [    0.114909] 8921_lvs4: Failed to create debugfs directory
 [    0.123576] samsung_m2_init : system rev = 15, Secjack Using
 [    0.124004] [WIFI] system_rev = 15
 [    0.124004] brcm_wlan_init: start
 [    0.124156] brcm_init_wlan_mem: WIFI MEM Allocated
 [    0.124370] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
 [    0.124401] hw-breakpoint: maximum watchpoint size is 8 bytes.
 [    0.129711] sps:BAM 0x12244000 enabled: ver:0x5, number of pipes:20
 [    0.129742] sps:BAM 0x12244000 is registered.
 [    0.130260] sps:sps is ready.
 [    0.162643] bio: create slab <bio-0> at 0
 [    0.163589] MAX8952 loading!!
 [    0.163955] ION heap vmalloc created
 [    0.163985] ION heap mm created at b0100000 with size 6000000
 [    0.164047] ION heap mm_fw created at afe00000 with size 200000
 [    0.164077] ION heap mfc created at b6100000 with size 2000
 [    0.164108] ION heap iommu created
 [    0.164169] ION heap qsecom created at ff009000 with size 780000
 [    0.164230] ION heap audio created at ff789000 with size 4cf000
 [    0.165237] pm8xxx_pwm_probe: OK
 [    0.165939] SCSI subsystem initialized
 [    0.166183] usbcore: registered new interface driver usbfs
 [    0.166274] usbcore: registered new interface driver hub
 [    0.166488] usbcore: registered new device driver usb
 [    0.166915] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-pwrkey/input/input0
 [    0.168106] i2c-gpio i2c-gpio.9: using pins 95 (SDA) and 96 (SCL)
 [    0.168350] i2c-gpio i2c-gpio.11: using pins 73 (SDA) and 74 (SCL)
 [    0.168594] i2c-gpio i2c-gpio.16: using pins 48 (SDA) and 47 (SCL)
 [    0.168960] i2c-gpio i2c-gpio.13: using pins 24 (SDA) and 25 (SCL)
 [    0.169204] i2c-gpio i2c-gpio.17: using pins 32 (SDA) and 33 (SCL)
 [    0.169388] i2c i2c-14: Invalid 7-bit I2C address 0x00
 [    0.169479] i2c i2c-14: Can't create device at 0x00
 [    0.169723] i2c-gpio i2c-gpio.14: using pins 12 (SDA) and 13 (SCL)
 [    0.169998] i2c i2c-19: Failed to register i2c client cmc624 at 0x38 (-16)
 [    0.170090] i2c i2c-19: Can't create device at 0x38
 [    0.170608] Error-Bad Function Input
 [    0.170700] max8952 19-0060: VID0/1 gpio invalid: DVS not available.
 [    0.171310] max8952 19-0060: DVS modes disabled because VID0 and VID1 do not have proper controls.
 [    0.179581] i2c-gpio i2c-gpio.19: using pins 71 (SDA) and 72 (SCL)
 [    0.179673] Linux media interface: v0.10
 [    0.179764] Linux video capture interface: v2.00
 [    0.180344] [SENSORS CORE] sensors_class_init
 [    0.180955] msm_iommu_dev: device vpe mapped at c9000000, with 2 ctx banks
 [    0.181077] msm_iommu_dev: device mdp0 mapped at c9200000, with 2 ctx banks
 [    0.181229] msm_iommu_dev: device mdp1 mapped at c9400000, with 2 ctx banks
 [    0.181352] msm_iommu_dev: device rot mapped at c9600000, with 2 ctx banks
 [    0.181474] msm_iommu_dev: device ijpeg mapped at c9800000, with 2 ctx banks
 [    0.181596] msm_iommu_dev: device vfe mapped at c9a00000, with 2 ctx banks
 [    0.181748] msm_iommu_dev: device vcodec_a mapped at c9c00000, with 2 ctx banks
 [    0.181870] msm_iommu_dev: device vcodec_b mapped at c9e00000, with 2 ctx banks
 [    0.182023] msm_iommu_dev: device gfx3d mapped at ca000000, with 3 ctx banks
 [    0.182176] msm_iommu_dev: device jpegd mapped at ca200000, with 2 ctx banks
 [    0.182389] msm_iommu_dev: device gfx2d0 mapped at ca400000, with 2 ctx banks
 [    0.182542] msm_iommu_dev: device gfx2d1 mapped at ca600000, with 2 ctx banks
 [    0.183061] msm_iommu_ctx msm_iommu_ctx.2: context vpe_src using bank 0
 [    0.183274] msm_iommu_ctx msm_iommu_ctx.3: context vpe_dst using bank 1
 [    0.183488] msm_iommu_ctx msm_iommu_ctx.4: context mdp_port0_cb0 using bank 0
 [    0.183732] msm_iommu_ctx msm_iommu_ctx.5: context mdp_port0_cb1 using bank 1
 [    0.183976] msm_iommu_ctx msm_iommu_ctx.6: context mdp_port1_cb0 using bank 0
 [    0.184220] msm_iommu_ctx msm_iommu_ctx.7: context mdp_port1_cb1 using bank 1
 [    0.184434] msm_iommu_ctx msm_iommu_ctx.8: context rot_src using bank 0
 [    0.184617] msm_iommu_ctx msm_iommu_ctx.9: context rot_dst using bank 1
 [    0.184861] msm_iommu_ctx msm_iommu_ctx.10: context ijpeg_src using bank 0
 [    0.185045] msm_iommu_ctx msm_iommu_ctx.11: context ijpeg_dst using bank 1
 [    0.185289] msm_iommu_ctx msm_iommu_ctx.12: context vfe_imgwr using bank 0
 [    0.185502] msm_iommu_ctx msm_iommu_ctx.13: context vfe_misc using bank 1
 [    0.185716] msm_iommu_ctx msm_iommu_ctx.14: context vcodec_a_stream using bank 0
 [    0.185960] msm_iommu_ctx msm_iommu_ctx.15: context vcodec_a_mm1 using bank 1
 [    0.186204] msm_iommu_ctx msm_iommu_ctx.16: context vcodec_b_mm2 using bank 0
 [    0.186540] msm_iommu_ctx msm_iommu_ctx.17: context gfx3d_user using bank 0
 [    0.186876] msm_iommu_ctx msm_iommu_ctx.18: context gfx3d_priv using bank 1
 [    0.187089] msm_iommu_ctx msm_iommu_ctx.0: context jpegd_src using bank 0
 [    0.187273] msm_iommu_ctx msm_iommu_ctx.1: context jpegd_dst using bank 1
 [    0.187547] msm_iommu_ctx msm_iommu_ctx.19: context gfx2d0_2d0 using bank 0
 [    0.187822] msm_iommu_ctx msm_iommu_ctx.20: context gfx2d1_2d1 using bank 0
 [    0.187944] Advanced Linux Sound Architecture Driver Version 1.0.25.
 [    0.188585] Bluetooth: Core ver 2.16
 [    0.188676] NET: Registered protocol family 31
 [    0.188707] Bluetooth: HCI device and connection manager initialized
 [    0.188707] Bluetooth: HCI socket layer initialized
 [    0.188737] Bluetooth: L2CAP socket layer initialized
 [    0.189104] Bluetooth: SCO socket layer initialized
 [    0.189470] cfg80211: Calling CRDA to update world regulatory domain
 [    0.190935] Switching to clocksource gp_timer
 [    0.232168] NET: Registered protocol family 2
 [    0.240683] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
 [    0.241385] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
 [    0.244315] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
 [    0.245750] TCP: Hash tables configured (established 131072 bind 65536)
 [    0.245780] TCP: reno registered
 [    0.245811] UDP hash table entries: 512 (order: 2, 16384 bytes)
 [    0.245872] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
 [    0.246299] NET: Registered protocol family 1
 [    0.246879] RPC: Registered named UNIX socket transport module.
 [    0.246909] RPC: Registered udp transport module.
 [    0.246909] RPC: Registered tcp transport module.
 [    0.246940] RPC: Registered tcp NFSv4.1 backchannel transport module.
 [    0.247337] Trying to unpack rootfs image as initramfs...
 [    0.310300] Freeing initrd memory: 868K
 [    0.315122] Detected 5 counters on the L2CC PMU.
 [    0.315458] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: scm_pas 
 [    0.316313] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot
 [    0.317686] pil_qdsp6v4 pil_qdsp6v4.2: using secure boot
 [    0.318937] pil_qdsp6v4 pil_qdsp6v4.1: using secure boot
 [    0.320799] pil_riva pil_riva: using secure boot
 [    0.324401] smd_channel_probe_worker: allocation table not initialized
 [    0.332000] NET: Registered protocol family 27
 [    0.333160] dspcrashd_probe: Platform driver values: Base = 0x8da00000, Size = 0x1800000,pdata = 0xdeaddead
 [    0.335113] modem_8960_init: modem fatal driver init'ed.
 [    0.335296] lpass_fatal_init: lpass SSR driver init'ed.
 [    0.335418] acpuclk-8960 acpuclk-8960: SPEED BIN: 0
 [    0.335418] acpuclk-8960 acpuclk-8960: ACPU PVS: 1
 [    0.336853] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: acpuclk-8960 
 [    0.337158] acpuclk-8960 acpuclk-8960: CPU0: 12 frequencies supported
 [    0.337250] acpuclk-8960 acpuclk-8960: CPU1: 12 frequencies supported
 [    0.339569] msm_rpm_log_probe: OK
 [    0.343293] audit: initializing netlink socket (disabled)
 [    0.343354] type=2000 audit(0.330:1): initialized
 [    0.344941] highmem bounce pool size: 64 pages
 [    0.349885] zpool: loaded
 [    0.353425] NFS: Registering the id_resolver key type
 [    0.354768] fuse init (API version 7.18)
 [    0.355379] SELinux:  Registering netfilter hooks
 [    0.359987] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
 [    0.360018] io scheduler noop registered (default)
 [    0.360018] io scheduler deadline registered
 [    0.360079] io scheduler row registered
 [    0.360109] io scheduler cfq registered
 [    0.360140] io scheduler fiops registered
 [    0.360445] io scheduler bfq registered
 [    0.360476] BFQ I/O-scheduler: v7r8
 [    0.362856] footswitch_enable: fs_mdp
 [    0.366244] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: dtv 
 [    0.366824] mipi_dsi base phy_addr = 0x4700000 virt = 0xca800000
 [    0.366946] mmss_sfpb  base phy_addr = 0x5700000,virt = 0xc8cd2000
 [    0.367343] Is_There_cmc624 : CMC624 is not there!!!!
 [    0.367953] set_esd_disable is called
 [    0.368289] setting pdata->panel_info.fb_num to 3. type: 8
 [    0.368747] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: mdp 
 [    0.382755] FrameBuffer[0] 720x1280 size=11304960 bytes is registered successfully!
 [    0.382878] pm_runtime: fail to wake up
 [    0.426644] mipi_samsung_manufacture_id: manufacture_id1=a2
 [    0.426857] mipi_samsung_manufacture_id: manufacture_id2=60
 [    0.427041] mipi_samsung_manufacture_id: manufacture_id3=8f
 [    0.427071] mipi_samsung_manufacture_id: manufacture_id=11be608f
 [    0.427071] first time mpt read
 [    0.428628] read_reg : D3[24] : 00 ff 09 fe .07 06 01 ff .00 ff 0b fe .08 07 01 fe .00 f9 0d fe .07 06 00 00 .00 00 00 00 .
 [    0.428658] second time mpt read
 [    0.430245] read_reg : D3[24] : 00 ff 09 fe .07 06 01 ff .00 ff 0b fe .08 07 01 fe .00 f9 0d fe .07 06 00 00 .00 00 00 00 .
 [    0.430276] MTP data is used from first read mtp
 [    0.430306] mipi_samsung_disp_on MTP is determined : 1
 [    0.430337] MTP:  00 ff 09 fe 07 06 01 ff 00 ff 0b fe 08 07 01 fe 00 f9 0d fe 07 06 00 00
 [    0.430825] Select 4.8 = 0(60)
 [    0.582481] set_esd_enable is called
 [    0.627559] Registered led device: lcd-backlight
 [    0.629665] setting pdata->panel_info.fb_num to 1. type: 7
 [    0.631130] FrameBuffer[1] 1920x1080 size=0 bytes is registered successfully!
 [    0.675019] mdp4_dtv_vsync_init: ndx=0
 [    0.675202] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group ef0b0e08
 [    0.675415] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Enabled
 [    0.676056] setting pdata->panel_info.fb_num to 1. type: 10
 [    0.676300] Inside writeback_driver_init
 [    0.676636] Inside writeback_probe
 [    0.677826] FrameBuffer[2] 1280x720 size=0 bytes is registered successfully!
 [    0.724339] 
 [    0.724339]  msm_vidc_enc: Inside vid_enc_init()
 [    0.724584] 
 [    0.724614]  msm_vidc_enc: Inside vid_enc_vcd_init()
 [    0.725255] create mhl sysfile
 [    0.725804] input: sii9234_rcp as /devices/virtual/input/input1
 [    0.770761] msm_serial: driver initialized
 [    0.771616] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART
 [    0.771982] msm_serial_hs module loaded
 [    0.772134] msm_serial_hsl: detected port #0
 [    0.772287] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16440000 (irq = 186) is a MSM
 [    0.772379] msm_serial_hsl: console setup on port #0
 [    0.960415] console [ttyHSL0] enabled
 [    0.960781] msm_serial_hsl: driver initialized
 [    0.961513] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: rotator 
 [    0.969479] footswitch_enable: fs_rot
 [    0.969601] footswitch_disable: fs_rot
 [    0.970181] msm_rotator_probe: rotator_hw_revision=2
 [    0.974515] diagchar initialized now
 [    0.975400] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: grp3d 
 [    0.983518] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
 [    0.985197] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: grp2d0 
 [    0.993407] kgsl kgsl-2d0: |kgsl_iommu_init| MMU type set for device is IOMMU
 [    0.994597] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: grp2d1 
 [    1.002746] kgsl kgsl-2d1: |kgsl_iommu_init| MMU type set for device is IOMMU
 [    1.011658] brd: module loaded
 [    1.015717] loop: module loaded
 [    1.016328] zram: Created 1 device(s)
 [    1.017366] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: qsee 
 [    1.025270] Loading pn544 driver
 [    1.025484] pn544_probe : IRQ num 394
 [    1.025637] pn544_probe : requesting IRQ 394
 [    1.026216] input: fsa9485 as /devices/platform/i2c-gpio.11/i2c-11/11-0025/input/input2
 [    1.026247] fsa9485_reg_init is called
 [    1.029696] fsa9485 11-0025:  fsa9485_reg_init dev ID: 0x0
 [    1.029971] i2c-core: driver [fsa9485] using legacy resume method
 [    1.030398] i2c i2c-12: mpu_probe: 0
 [    1.030428] <6>mldl_cfg:Reset MPU6050 B1
 [    1.081550] set_esd_enable_work_func is called
 [    1.136731] i2c i2c-12: Installing irq using 357
 [    1.136761] i2c i2c-12: Module Param interface = mpuirq
 [    1.137219] i2c i2c-12: inv_mpu_register_slave: +mpu6050 Type 1: Addr: 68 IRQ: 357, Adapt: 12
 [    1.137585] i2c i2c-12: Installing accelirq irq using 357
 [    1.138165] i2c-core: driver [mpu6050] using legacy suspend method
 [    1.138196] i2c-core: driver [mpu6050] using legacy resume method
 [    1.138257] mpu_init: Probe name mpu6050
 [    1.138409] i2c i2c-12: ak8975_mod_probe: ak8975_mod
 [    1.138440] i2c i2c-12: inv_mpu_register_slave: +ak8975 Type 2: Addr:  c IRQ: 356, Adapt: 12
 [    1.140180] i2c i2c-12: Installing compassirq irq using 356
 [    1.140485] ak8975_mod_init: Probe name ak8975_mod
 [    1.140820] a2220_probe - finish
 [    1.140882] thread_start
 [    1.140912] i2c-core: driver [audience_a2220] using legacy suspend method
 [    1.140943] i2c-core: driver [audience_a2220] using legacy resume method
 [    1.141095] wcd9xxx_i2c_probe
 [    1.213093] wcd9xxx_check_codec_type: codec is tabla_codec
 [    1.213123] wcd9xxx_check_codec_type: Read codec idbytes & version
 [    1.213123] byte_0[00000002] byte_1[00000000] byte_2[00000000]
 [    1.213154]  byte_3[00000001] version = 2
 [    1.213917] wcd9xxx_i2c_probe
 [    1.213917] probe for other slaves devices of tabla
 [    1.213978] wcd9xxx_i2c_probe
 [    1.213978] probe for other slaves devices of tabla
 [    1.214008] wcd9xxx_i2c_probe
 [    1.214039] probe for other slaves devices of tabla
 [    1.214130] i2c-core: driver [tabla-i2c-core] using legacy suspend method
 [    1.214130] i2c-core: driver [tabla-i2c-core] using legacy resume method
 [    1.215382] SCSI Media Changer driver v0.25 
 [    1.216206] spi_qsd spi_qsd.0: master is unqueued, this is deprecated
 [    1.217701] tun: Universal TUN/TAP device driver, 1.6
 [    1.217732] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
 [    1.217854] rmnet_init: BAM devices[9]
 [    1.227529] PPP generic driver version 2.4.2
 [    1.227681] PPP BSD Compression module registered
 [    1.227712] PPP Deflate Compression module registered
 [    1.228414] PPP MPPE Compression module registered
 [    1.228444] NET: Registered protocol family 24
 [    1.228475] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
 [    1.228475] CSLIP: code copyright 1989 Regents of the University of California.
 [    1.228567] usbcore: registered new interface driver asix
 [    1.228628] usbcore: registered new interface driver cdc_ether
 [    1.228689] usbcore: registered new interface driver net1080
 [    1.228750] usbcore: registered new interface driver cdc_subset
 [    1.228811] usbcore: registered new interface driver zaurus
 [    1.229116] usbcore: registered new interface driver cdc_ncm
 [    1.229299] msm_otg msm_otg: msm_otg probe
 [    1.229421] msm_otg msm_otg: OTG regs = c8f18000
 [    1.232626] msm_otg msm_otg: success to host_notify_dev_register
 [    1.232778] msm_otg msm_otg: request irq succeed for otg_power
 [    1.237753] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: usb 
 [    1.246146] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 [    1.247001] usbcore: registered new interface driver cdc_acm
 [    1.247031] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
 [    1.247092] usbcore: registered new interface driver usblp
 [    1.247092] Initializing USB Mass Storage driver...
 [    1.247184] usbcore: registered new interface driver usb-storage
 [    1.247184] USB Mass Storage support registered.
 [    1.247245] usbcore: registered new interface driver ums-alauda
 [    1.247306] usbcore: registered new interface driver ums-cypress
 [    1.247367] usbcore: registered new interface driver ums-datafab
 [    1.247428] usbcore: registered new interface driver ums-freecom
 [    1.247459] usbcore: registered new interface driver ums-isd200
 [    1.247520] usbcore: registered new interface driver ums-jumpshot
 [    1.247581] usbcore: registered new interface driver ums-karma
 [    1.247642] usbcore: registered new interface driver ums-onetouch
 [    1.247703] usbcore: registered new interface driver ums-sddr09
 [    1.247764] usbcore: registered new interface driver ums-sddr55
 [    1.247825] usbcore: registered new interface driver ums-usbat
 [    1.247947] usbcore: registered new interface driver usbserial
 [    1.247978] usbserial: USB Serial Driver core
 [    1.248039] usbcore: registered new interface driver pl2303
 [    1.248100] USB Serial support registered for pl2303
 [    1.248161] usbcore: registered new interface driver qcserial
 [    1.248222] USB Serial support registered for Qualcomm USB modem
 [    1.248283] usbcore: registered new interface driver usb_ehset_test
 [    1.248344] usbcore: registered new interface driver diag_bridge
 [    1.248710] usbcore: registered new interface driver mdm_bridge
 [    1.249839] usb: android_probe pdata: c0d48bdc
 [    1.250053] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
 [    1.250236] usb: android_bind disconnect
 [    1.250267] usb:: ci13xxx_pullup is_active: 0
 [    1.250267] usb:: ci13xxx_pullup udc->udc_driver->flags:3f
 [    1.250297] usb:: ci13xxx_pullup !udc->vbus_active:1, !udc->driver:1
 [    1.252800] android_usb gadget: Mass Storage Function, version: 2009/09/11
 [    1.252830] android_usb gadget: Number of LUNs=1
 [    1.252861]  lun0: LUN: removable file: (no medium)
 [    1.253319] android_bind : serial_string: 0123456789ABCDEF
 [    1.253319] usb: composite_bind idVendor=0x0, idProduct=0x0
 [    1.253349] usb: composite_bind bcdDevice=0x0
 [    1.253349] usb: composite_bind composite_manufacturer=
 [    1.253380] android_usb gadget: android_usb ready
 [    1.254143] mousedev: PS/2 mouse device common for all mice
 [    1.255486] input: sec_keys as /devices/platform/sec_keys/input/input3
 [    1.256401] usbcore: registered new interface driver xpad
 [    1.256706] input: sec_touchscreen as /devices/i2c-3/3-0048/input/input4
 [    1.257378] mms_ts 3-0048: [TSP]fw version 0xbd !!!!
 [    1.257866] mms_ts 3-0048: [TSP]hw rev = 0x01
 [    1.259270] mms_ts 3-0048: [TSP] ISC Ver [0xbd] [0x22] [0x22]
 [    1.264092] mms_ts 3-0048: [TSP] fw is latest. Do not update.
 [    1.269952] mms_ts 3-0048: Melfas MMS-series touch controller initialized
 [    1.271112] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
 [    1.271478] i2c /dev entries driver
 [    1.273523] usbcore: registered new interface driver uvcvideo
 [    1.273554] USB Video Class driver (1.1.1)
 [    1.273981] [__s5c73m3_probe:3838] S5C73M3 probe
 [    1.277796] msm_otg msm_otg: phy_reset: success
 [    1.277826] [s5c73m3_sensor_probe_cb:3813] Entered
 [    1.282527] [s5c73m3_i2c_probe:3696] Entered
 [    1.286738] [s5c73m3_init_client:3399] Entered
 [    1.291103] [s5c73m3_i2c_probe:3715] Exit
 [    1.295254] [s5c73m3_sensor_probe:3746] Entered
 [    1.299679] [s5c73m3_spi_init:225] Entered
 [    1.303799] [s5c73m3_spi_probe:190] Entered
 [    1.307950] a2220_bootup_init: starting to load image (2273 passes)...
 [    1.307981] [s5c73m3_spi_probe:200] s5c73m3_spi successfully probed
 [    1.308011] [s5c73m3_sensor_probe :  3769] Probe_done!!
 [    1.308530] ############# s5k6a3yx_probe ##############
 [    1.308560] #######s5k6a3yx_sensor_v4l2_probe #########
 [    1.311735] max17040_probe: MAX17043 driver Loading!
 [    1.311765] max17040_get_version :
 [    1.312498] max17040 13-0036: MAX17040 Fuel-Gauge Ver 00
 [    1.313169] max17040_get_rcomp : current rcomp = 0x851c(85)
 [    1.313200] [max17048] using RCOMP (0x851c)
 [    1.314390] max17040_get_rcomp : current rcomp = 0x851c(85)
 [    1.321776] i2c-core: driver [max17040] using legacy suspend method
 [    1.321806] i2c-core: driver [max17040] using legacy resume method
 [    1.323546] smb347_probe: SMB347 driver Loading!
 [    1.331725] i2c-core: driver [smb347] using legacy suspend method
 [    1.331756] i2c-core: driver [smb347] using legacy resume method
 [    1.357820] pm8xxx_tm_probe: OK
 [    1.359041] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
 [    1.359377] Bluetooth: HCI UART driver ver 2.2
 [    1.359407] Bluetooth: HCI H4 protocol initialized
 [    1.359438] Bluetooth: BlueSleep Mode Driver Ver 1.1
 [    1.360994] cpuidle: using governor ladder
 [    1.361025] cpuidle: using governor menu
 [    1.361880] mmc0: SDCC Version: 0x00000018
 [    1.361941] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: msm_sdcc 
 [    1.371829] mmc0: bam physical base=0x12402000
 [    1.371921] mmc0: bam virtual base=0xc8f2c000
 [    1.371951] sps:BAM 0x12402000 is registered.
 [    1.371982] mmc0: BAM device registered. bam_handle=0xeed48000
 [    1.372195] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
 [    1.372592] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130
 [    1.372653] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800
 [    1.372714] mmc0: No card detect facilities available
 [    1.378971] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1
 [    1.378971] mmc0: Controller capabilities: 0x0000019e
 [    1.379001] mmc0: 8 bit data mode enabled
 [    1.379001] mmc0: 4 bit data mode disabled
 [    1.379032] mmc0: polling status mode disabled
 [    1.379032] mmc0: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz
 [    1.379063] mmc0: Slot eject status = 0
 [    1.379063] mmc0: Power save feature enable = 1
 [    1.379093] mmc0: SPS-BAM data transfer mode available
 [    1.379642] mmc1: SDCC Version: 0x00000018
 [    1.379673] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: msm_sdcc 
 [    1.387669] couldn't get usb power supply
 [    1.393621] msm_otg msm_otg: USB in low power mode
 [    1.398260] mmc1: bam physical base=0x12182000
 [    1.398290] mmc1: bam virtual base=0xc8f78000
 [    1.398321] sps:BAM 0x12182000 is registered.
 [    1.398321] mmc1: BAM device registered. bam_handle=0xeed48800
 [    1.398779] sps:BAM 0x12182000 enabled: ver:0x5, number of pipes:6
 [    1.399175] mmc1: Qualcomm MSM SDCC-BAM at 0x0000000012182000 irq 128
 [    1.399236] mmc1: Qualcomm MSM SDCC-DML at 0x0000000012180800
 [    1.403235] mmc1: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,657 dma -1 dmacrcri -1
 [    1.403265] mmc1: Controller capabilities: 0x0000019e
 [    1.403265] mmc1: 8 bit data mode disabled
 [    1.403296] mmc1: 4 bit data mode enabled
 [    1.403296] mmc1: polling status mode disabled
 [    1.403387] mmc1: MMC clock 400000 -> 192000000 Hz, PCLK 0 Hz
 [    1.403418] mmc1: Slot eject status = 1
 [    1.403418] mmc1: Power save feature enable = 1
 [    1.403448] mmc1: SPS-BAM data transfer mode available
 [    1.404272] mmc2: SDCC Version: 0x00000018
 [    1.404364] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: msm_sdcc 
 [    1.413947] mmc2: bam physical base=0x121c2000
 [    1.414069] mmc2: bam virtual base=0xc8fa4000
 [    1.414100] sps:BAM 0x121c2000 is registered.
 [    1.414100] mmc2: BAM device registered. bam_handle=0xeed5e000
 [    1.414558] sps:BAM 0x121c2000 enabled: ver:0x5, number of pipes:6
 [    1.414954] mmc2: Qualcomm MSM SDCC-BAM at 0x00000000121c2000 irq 127
 [    1.415016] mmc2: Qualcomm MSM SDCC-DML at 0x00000000121c0800
 [    1.415443] check print
 [    1.417121] brcm_wifi_status_register: callback is c06edcd8, devid is -1059876104
 [    1.435678] mmc2: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,0 dma -1 dmacrcri -1
 [    1.435678] mmc2: Controller capabilities: 0x0000019e
 [    1.435708] mmc2: 8 bit data mode disabled
 [    1.435708] mmc2: 4 bit data mode enabled
 [    1.435739] mmc2: polling status mode disabled
 [    1.435739] mmc2: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
 [    1.435830] mmc2: Slot eject status = 0
 [    1.435830] mmc2: Power save feature enable = 1
 [    1.435861] mmc2: SPS-BAM data transfer mode available
 [    1.436380] aat1290a_led_probe : Probe
 [    1.468487] usbcore: registered new interface driver usbhid
 [    1.468548] usbhid: USB HID core driver
 [    1.468731] zcache: using lzo compressor
 [    1.474256] zcache: cleancache enabled using kernel transcendent memory and compression buddies
 [    1.490553] ashmem: initialized
 [    1.491255] 8921_l16: Failed to create debugfs directory
 [    1.522722] mmc0: new high speed DDR MMC card at address 0001
 [    1.523668] mmcblk0: mmc0:0001 MBG8FB 29.1 GiB 
 [    1.534075] GPT:Primary header thinks Alt. header is not at the end of the disk.
 [    1.534106] GPT:61069311 != 61071359
 [    1.534106] GPT:Alternate GPT header not at the end of the disk.
 [    1.534137] GPT:61069311 != 61071359
 [    1.534137] GPT: Use GNU Parted to correct GPT errors.
 [    1.534442]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23
 [    1.552113] cm36651_setup_reg: initial proximity value = 0
 [    1.557881] cm36651_setup_reg is success.
 [    1.558095] input: proximity_sensor as /devices/virtual/input/input5
 [    1.559194] input: light_sensor as /devices/virtual/input/input6
 [    1.559865] cm36651_i2c_probe is success.
 [    1.561086] input: barometer_sensor as /devices/virtual/input/input7
 [    1.562063] usbcore: registered new interface driver snd-usb-audio
 [    1.566610] msm_pcm_probe: dev name msm-voip-dsp
 [    1.568319] msm_pcm_probe: dev name msm-pcm-dsp
 [    1.568808] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
 [    1.569204] msm_pcm_probe: dev name msm-lowlatency-pcm-dsp
 [    1.569235] adding pm_qos request in low latency driver
 [    1.569235] done adding pm_qos request in low latency driver
 [    1.571005] msm_compr_probe: dev name msm-compr-dsp
 [    1.571890] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
 [    1.572531] msm8960_audio_init: start
 [    1.753425] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
 [    1.755348] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
 [    1.757240] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
 [    1.759133] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
 [    1.760933] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
 [    1.762887] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
 [    1.764779] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
 [    1.766580] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
 [    1.768380] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
 [    1.770273] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
 [    1.772226] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
 [    1.774149] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok
 [    1.776072] asoc: snd-soc-dummy-dai <-> VoLTE mapping ok
 [    1.778116] asoc: snd-soc-dummy-dai <-> Voice2 mapping ok
 [    1.780009] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
 [    1.781840] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok
 [    1.783488] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok
 [    1.785197] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok
 [    1.786937] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok
 [    1.788676] asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok
 [    1.790416] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
 [    1.792247] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
 [    1.793926] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok
 [    1.795666] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok
 [    1.797314] asoc: msm-stub-rx <-> msm-dai-q6.32773 mapping ok
 [    1.799053] asoc: msm-stub-tx <-> msm-dai-q6.32772 mapping ok
 [    1.800793] asoc: msm-stub-tx <-> msm-dai-q6.32771 mapping ok
 [    1.803937] asoc: tabla_i2s_rx1 <-> msm-dai-q6.0 mapping ok
 [    1.804181] tabla_codec tabla_codec: ASoC: Failed to create Digital Mic1 debugfs file
 [    1.811353] asoc: tabla_i2s_tx1 <-> msm-dai-q6.1 mapping ok
 [    1.816175] input: msm8960-snd-card Volumedown Jack as /devices/platform/soc-audio.0/sound/card0/input8
 [    1.816481] input: msm8960-snd-card Volumeup Jack as /devices/platform/soc-audio.0/sound/card0/input9
 [    1.816969] input: msm8960-snd-card Button Jack as /devices/platform/soc-audio.0/sound/card0/input10
 [    1.817274] input: msm8960-snd-card Headset Jack as /devices/platform/soc-audio.0/sound/card0/input11
 [    1.823500] u32 classifier
 [    1.823531]     Actions configured
 [    1.823531] Netfilter messages via NETLINK v0.30.
 [    1.823653] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
 [    1.824446] ctnetlink v0.93: registering with nfnetlink.
 [    1.824538] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
 [    1.824538] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
 [    1.824996] xt_time: kernel timezone is -0000
 [    1.825637] ip_tables: (C) 2000-2006 Netfilter Core Team
 [    1.826125] arp_tables: (C) 2002 David S. Miller
 [    1.826308] TCP: cubic registered
 [    1.826308] Initializing XFRM netlink socket
 [    1.827041] NET: Registered protocol family 10
 [    1.832321] Mobile IPv6
 [    1.832382] ip6_tables: (C) 2000-2006 Netfilter Core Team
 [    1.832748] IPv6 over IPv4 tunneling driver
 [    1.833633] NET: Registered protocol family 17
 [    1.833725] NET: Registered protocol family 15
 [    1.833877] Bridge firewalling registered
 [    1.833908] Ebtables v2.0 registered
 [    1.833999] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
 [    1.834152] L2TP core driver, V2.0
 [    1.834152] Registering the dns_resolver key type
 [    1.835830] Registering SWP/SWPB emulation handler
 [    1.835861] clock_late_init: Removing enables held for handed-off clocks
 [    1.843338] WDOG handled by TZ:dump @0xee796000 PA:ae996000
 [    1.843583] MSM Watchdog Initialized
 [    1.845322] footswitch_disable: fs_gfx3d
 [    1.846024] footswitch_disable: fs_ijpeg
 [    1.846604] footswitch_disable: fs_ved
 [    1.847642] footswitch_disable: fs_vfe
 [    1.848313] footswitch_disable: fs_vpe
 [    1.850541] sec_jack_probe : Registering jack driver
 [    1.851030] sec_jack_detect_work: detect_irq(0)
 [    1.851060] sec_jack: ear micbias off
 [    1.851060] sec_jack: ear micbias off
 [    1.851670] 8921_l29: Failed to create debugfs directory
 [    1.851732] 8921_l10: Failed to create debugfs directory
 [    1.852617] cypress_power_on is finished.
 [    1.852769] input: sec_touchkey as /devices/platform/i2c-gpio.16/i2c-16/16-0020/input/input12
 [    1.853288] Registered led device: button-backlight
 [    1.882618] cypress_touchkey 16-0020: Touchkey FW Version: 0x06
 [    1.890462] [TouchKey] data[0]=50 data[1]=6 data[2]=5 data[3]=1
 [    1.943903] [Touchkey] autocal Enabled
 [    1.944605] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2016-05-26 01:44:06 UTC (1464227046)
 [    1.944941] pm8921_charger_probe: driver Loading SKIP!!!
 [    1.945002] pm8921-charger: probe of pm8921-charger failed with error -22
 [    1.945734] sec_bat_probe: SEC Battery Driver Loading
 [    1.945765] [battery] enable Vref_batt_therm
 [    1.946558] sec_bat_probe: initial charging_status = 1
 [    1.952357] cable type (0) -----
 [    1.954005] max17040_rcomp_update : temp(31), rcomp 0x851c -> 0x6d1c (109)
 [    1.957057] tspdrv: tspdrv_probe.
 [    1.957301] ImmVibeSPI_ForceOut_Initialize.
 [    1.957973] dhd_module_init in
 [    1.958248] found wifi platform device bcmdhd_wlan
 [    1.959011] Power-up adapter 'DHD generic adapter'
 [    1.959102] wifi_platform_set_power = 1
 [    1.959133] ------------------------------------------------
 [    1.959163] ------------------------------------------------
 [    1.959194] brcm_wlan_power Enter: power on
 [    2.162246] wifi_platform_bus_enumerate device present 1
 [    2.162307] brcm_wlan_set_carddetect: callback is c06edcd8, devid is eed5c3c0
 [    2.241477] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
 [    2.244285] mmc2: queuing unknown CIS tuple 0x80 (6 bytes)
 [    2.329284] mmc2: new high speed SDIO card at address 0001
 [    2.347565] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
 [    2.347932] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
 [    2.347962] bus num (host idx)=2, slot num (rca)=1
 [    2.347993] found adapter info 'DHD generic adapter'
 [    2.348115] alloc static buf at ef7c0000!
 [    2.382725] DHD: dongle ram size is set to 524288(orig 524288) at 0x0
 [    2.386204] p2p0: P2P Interface Registered
 [    2.386479] dhd_deferred_work_init: work queue initialized 
 [    2.386906] 
 [    2.386906] Dongle Host Driver, version 1.141.44.4 (r)
 [    2.386906] Compiled from 
 [    2.387303] Register interface [wlan0]  MAC: 00:c9:07
 [    2.387303] 
 [    2.387303] dhd_prot_ioctl : bus is down. we have nothing to do
 [    2.387334] dhd_wl_ioctl: WLC_IOCTL: cmd: 3, ret = -1
 [    2.387578] wifi_platform_set_power = 0
 [    2.387608] ------------------------------------------------
 [    2.387608] ------------------------------------------------
 [    2.387608] brcm_wlan_power Enter: power off
 [    2.592430] ALSA device list:
 [    2.592461]   #0: msm8960-snd-card
 [    2.595025] Freeing init memory: 384K
 [    2.599298] init: init started!
 [    2.607019] SELinux: 2048 avtab hash slots, 10998 rules.
 [    2.607721] SELinux:  Android master kernel running Android M policy in compatibility mode.
 [    2.612757] SELinux: 2048 avtab hash slots, 10998 rules.
 [    2.612788] SELinux:  1 users, 2 roles, 974 types, 0 bools, 1 sens, 1024 cats
 [    2.612818] SELinux:  87 classes, 10998 rules
 [    2.614497] SELinux:  Completing initialization.
 [    2.614497] SELinux:  Setting up existing superblocks.
 [    2.614527] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
 [    2.614558] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
 [    2.614649] SELinux: initialized (dev bdev, type bdev), not configured for labeling
 [    2.614680] SELinux: initialized (dev proc, type proc), uses genfs_contexts
 [    2.614710] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
 [    2.614741] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
 [    2.644590] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
 [    2.644620] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
 [    2.644651] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
 [    2.644681] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
 [    2.644712] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
 [    2.644803] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
 [    2.644834] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
 [    2.658934] type=1403 audit(1464227047.200:2): policy loaded auid=4294967295 ses=4294967295
 [    2.659514] init: (Initializing SELinux non-enforcing took 0.06s.)
 [    2.681306] init: init second stage started!
 [    2.867785] init: waitpid failed: No child processes
 [    2.872211] init: (Loading properties from /default.prop took 0.00s.)
 [    2.874225] init: (Parsing /init.environ.rc took 0.00s.)
 [    2.874530] init: (Parsing /init.usb.rc took 0.00s.)
 [    2.877155] init: (Parsing init.qcom.usb.rc took 0.00s.)
 [    2.877460] init: (Parsing init.qcom.power.rc took 0.00s.)
 [    2.877491] init: (Parsing /init.qcom.rc took 0.00s.)
 [    2.877918] init: (Parsing /init.usb.configfs.rc took 0.00s.)
 [    2.877979] init: (Parsing /init.zygote32.rc took 0.00s.)
 [    2.878132] init: (Parsing /init.trace.rc took 0.00s.)
 [    2.878620] init: (Parsing /init.superuser.rc took 0.00s.)
 [    2.878650] init: (Parsing /init.cm.rc took 0.00s.)
 [    2.878681] init: (Parsing /init.rc took 0.01s.)
 [    2.878895] init: SELinux: Could not get canonical path /adb_keys restorecon: No such file or directory.
 [    2.887746] init: Starting service 'ueventd'...
 [    2.888722] init: Waiting for /dev/.coldboot_done...
 [    2.890218] ueventd: ueventd started!
 [    2.891011] ueventd: invalid gid 'qcom_oncrpc'
 [    2.894613] ueventd: invalid uid 'fm_radio'
 [    3.635556] a2220_bootup_init:a2220_bootup_init 7
 [    3.662414] a2220_bootup_init:firmware loaded successfully
 [    3.732336] fsa9485 11-0025: fsa9485_init_detect
 [    3.733282] fsa9485 11-0025: dev1: 0x4, dev2: 0x0 adc : 0x1f
 [    3.733282] fsa9485 11-0025: usb connect
 [    3.733282] fsa9485_usb_cb attached 1
 [    3.733312] fsa9485_usb_cb set vbus state
 [    3.733312] msm_otg msm_otg: MUIC: BSV set
 [    3.733343] sec-battery sec-battery: sec_bat_set_property: cable was changed(4), prev(0)
 [    3.735266] msm_otg msm_otg: USB exited from low power mode
 [    3.735449] smb347_set_charging_current : 500
 [    3.740912] [battery] INPUT_USBIN
 [    3.740943] smb347_charger_function_conrol : reg (0x1) = 0x21
 [    3.756111] smb347_set_top_off : => reg (0x0) = 0x7b
 [    3.758766] max17040_rcomp_update : temp(31), rcomp 0x6d1c -> 0x851c (133)
 [    3.800793] ueventd: Coldboot took 0.88s.
 [    3.804242] init: Waiting for /dev/.coldboot_done took 0.92s.
 [    3.872760] a2220_bootup_init:a2220_bootup_init 8
 [    3.873828] a2220_bootup_init : a2220_bootup_init - finish
 [    3.879200] usb:: ci13xxx_vbus_session,3326
 [    3.879230] usb:: ci13xxx_vbus_session gadget_ready:1, is_active:1
 [    3.879261] usb:: hw_device_reset
 [    3.879322] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
 [    3.879352] usb:: ci13xxx_vbus_session softconnect: 0
 [    3.910178] init: could not open /dev/keychord: No such file or directory
 [    3.917717] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
 [    3.918083] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
 [    3.919792] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
 [    3.923485] init: write_file: Unable to open '/proc/sys/kernel/hung_task_timeout_secs': No such file or directory
 [    3.923638] init: write_file: Unable to open '/proc/sys/kernel/sched_tunable_scaling': No such file or directory
 [    3.923668] init: write_file: Unable to open '/proc/sys/kernel/sched_latency_ns': No such file or directory
 [    3.923729] init: write_file: Unable to open '/proc/sys/kernel/sched_wakeup_granularity_ns': No such file or directory
 [    3.923790] init: write_file: Unable to open '/proc/sys/kernel/sched_compat_yield': No such file or directory
 [    3.925438] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
 [    3.925652] init: write_file: Unable to write to '/dev/cpuctl/cpu.shares': Invalid argument
 [    3.928979] init: write_file: Unable to open '/proc/sys/abi/swp': No such file or directory
 [    3.932611] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
 [    3.949397] zcache: created ephemeral tmem pool, id=0, client=65535
 [    3.950679] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: errors=panic
 [    3.950740] SELinux: initialized (dev mmcblk0p14, type ext4), uses xattr
 [    3.951045] fs_mgr: __mount(source=/dev/block/platform/msm_sdcc.1/by-name/system,target=/system,type=ext4)=0
 [    3.966610] F2FS-fs (mmcblk0p17): Magic Mismatch, valid(0xf2f52010) - read(0xd200)
 [    3.966641] F2FS-fs (mmcblk0p17): Can't find valid F2FS filesystem in 1th superblock
 [    3.974240] F2FS-fs (mmcblk0p17): Magic Mismatch, valid(0xf2f52010) - read(0x0)
 [    3.974271] F2FS-fs (mmcblk0p17): Can't find valid F2FS filesystem in 2th superblock
 [    3.981260] F2FS-fs (mmcblk0p17): Magic Mismatch, valid(0xf2f52010) - read(0xd200)
 [    3.981291] F2FS-fs (mmcblk0p17): Can't find valid F2FS filesystem in 1th superblock
 [    3.989256] F2FS-fs (mmcblk0p17): Magic Mismatch, valid(0xf2f52010) - read(0x0)
 [    3.989287] F2FS-fs (mmcblk0p17): Can't find valid F2FS filesystem in 2th superblock
 [    3.997131] fs_mgr: __mount(source=/dev/block/platform/msm_sdcc.1/by-name/cache,target=/cache,type=f2fs)=-1
 [    4.010071] zcache: created ephemeral tmem pool, id=1, client=65535
 [    4.010132] EXT4-fs (mmcblk0p17): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
 [    4.010163] SELinux: initialized (dev mmcblk0p17, type ext4), uses xattr
 [    4.010224] fs_mgr: check_fs(): mount(/dev/block/platform/msm_sdcc.1/by-name/cache,/cache,ext4)=0: Success
 [    4.010346] zcache: destroyed pool id=1, cli_id=65535
 [    4.012452] fs_mgr: check_fs(): unmount(/cache) succeeded
 [    4.013062] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/cache
 [    4.125743] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
 [    4.125743] 
 [    4.125866] e2fsck: /dev/block/platform/msm_sdcc.1/by-name/cache: clean, 18/53760 files, 7734/215040 blocks
 [    4.125896] 
 [    4.135083] zcache: created ephemeral tmem pool, id=1, client=65535
 [    4.135266] EXT4-fs (mmcblk0p17): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc,errors=panic,journal_async_commit
 [    4.135357] SELinux: initialized (dev mmcblk0p17, type ext4), uses xattr
 [    4.135479] fs_mgr: __mount(source=/dev/block/platform/msm_sdcc.1/by-name/cache,target=/cache,type=ext4)=0
 [    4.135571] fs_mgr: mount_with_alternatives(): Mounted /dev/block/platform/msm_sdcc.1/by-name/cache on /cache with fs_type=ext4 instead of f2fs
 [    4.158095] F2FS-fs (mmcblk0p15): Magic Mismatch, valid(0xf2f52010) - read(0x1ab2a0)
 [    4.158126] F2FS-fs (mmcblk0p15): Can't find valid F2FS filesystem in 1th superblock
 [    4.165817] F2FS-fs (mmcblk0p15): Magic Mismatch, valid(0xf2f52010) - read(0x100000)
 [    4.165878] F2FS-fs (mmcblk0p15): Can't find valid F2FS filesystem in 2th superblock
 [    4.172836] F2FS-fs (mmcblk0p15): Magic Mismatch, valid(0xf2f52010) - read(0x1ab2a0)
 [    4.172867] F2FS-fs (mmcblk0p15): Can't find valid F2FS filesystem in 1th superblock
 [    4.180589] F2FS-fs (mmcblk0p15): Magic Mismatch, valid(0xf2f52010) - read(0x100000)
 [    4.180650] F2FS-fs (mmcblk0p15): Can't find valid F2FS filesystem in 2th superblock
 [    4.189012] fs_mgr: __mount(source=/dev/block/platform/msm_sdcc.1/by-name/userdata,target=/data,type=f2fs)=-1
 [    4.203296] zcache: created ephemeral tmem pool, id=2, client=65535
 [    4.203448] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
 [    4.203479] SELinux: initialized (dev mmcblk0p15, type ext4), uses xattr
 [    4.203570] fs_mgr: check_fs(): mount(/dev/block/platform/msm_sdcc.1/by-name/userdata,/data,ext4)=0: Success
 [    4.203692] zcache: destroyed pool id=2, cli_id=65535
 [    4.266870] fs_mgr: check_fs(): unmount(/data) succeeded
 [    4.266900] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/userdata
 [    4.353242] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
 [    4.353273] 
 [    4.353303] e2fsck: /dev/block/platform/msm_sdcc.1/by-name/userdata: clean, 16/1749664 files, 244956/6994944 blocks
 [    4.353303] 
 [    4.360476] zcache: created ephemeral tmem pool, id=2, client=65535
 [    4.360628] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,journal_async_commit,errors=panic
 [    4.360659] SELinux: initialized (dev mmcblk0p15, type ext4), uses xattr
 [    4.360750] fs_mgr: __mount(source=/dev/block/platform/msm_sdcc.1/by-name/userdata,target=/data,type=ext4)=0
 [    4.360781] fs_mgr: mount_with_alternatives(): Mounted /dev/block/platform/msm_sdcc.1/by-name/userdata on /data with fs_type=ext4 instead of f2fs
 [    4.385685] zcache: created ephemeral tmem pool, id=3, client=65535
 [    4.385746] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
 [    4.385777] SELinux: initialized (dev mmcblk0p16, type ext4), uses xattr
 [    4.385838] fs_mgr: check_fs(): mount(/dev/block/platform/msm_sdcc.1/by-name/persist,/persist,ext4)=0: Success
 [    4.385960] zcache: destroyed pool id=3, cli_id=65535
 [    4.392766] fs_mgr: check_fs(): unmount(/persist) succeeded
 [    4.392827] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/persist
 [    4.423195] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
 [    4.423195] 
 [    4.423226] e2fsck: /dev/block/platform/msm_sdcc.1/by-name/persist: clean, 16/512 files, 1075/2048 blocks
 [    4.423256] 
 [    4.429391] zcache: created ephemeral tmem pool, id=3, client=65535
 [    4.429452] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: barrier=1
 [    4.429482] SELinux: initialized (dev mmcblk0p16, type ext4), uses xattr
 [    4.429513] fs_mgr: __mount(source=/dev/block/platform/msm_sdcc.1/by-name/persist,target=/persist,type=ext4)=0
 [    4.442636] zcache: created ephemeral tmem pool, id=4, client=65535
 [    4.442698] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
 [    4.442728] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr
 [    4.442789] fs_mgr: check_fs(): mount(/dev/block/platform/msm_sdcc.1/by-name/efs,/efs,ext4)=0: Success
 [    4.442911] zcache: destroyed pool id=4, cli_id=65535
 [    4.462749] fs_mgr: check_fs(): unmount(/efs) succeeded
 [    4.462780] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/efs
 [    4.493178] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
 [    4.493209] 
 [    4.493239] e2fsck: /dev/block/platform/msm_sdcc.1/by-name/efs: clean, 70/880 files, 1211/3488 blocks
 [    4.493239] 
 [    4.499710] zcache: created ephemeral tmem pool, id=4, client=65535
 [    4.499771] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,journal_async_commit,errors=panic
 [    4.499801] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr
 [    4.499862] fs_mgr: __mount(source=/dev/block/platform/msm_sdcc.1/by-name/efs,target=/efs,type=ext4)=0
 [    4.511063] SELinux: initialized (dev mmcblk0p1, type vfat), uses mountpoint labeling
 [    4.511094] fs_mgr: __mount(source=/dev/block/platform/msm_sdcc.1/by-name/modem,target=/firmware-mdm,type=vfat)=0
 [    4.547871] init: Starting service 'logd'...
 [    4.610346] init: (Loading properties from /system/build.prop took 0.04s.)
 [    4.610437] init: (Loading properties from /vendor/build.prop took 0.00s.)
 [    4.610499] init: (Loading properties from /factory/factory.prop took 0.00s.)
 [    4.612940] logd.auditd: start
 [    4.612971] logd.klogd: 4610322403
 [    4.617610] init: Starting service 'vold'...
 [    4.619716] init: Not bootcharting.
 [    4.746833] init: SELinux: Could not get canonical path /data/user/0 restorecon: No such file or directory.
 [    4.756081] init: Starting service 'exec 0 (/system/bin/tzdatacheck)'...
 [    4.793560] init: Service 'exec 0 (/system/bin/tzdatacheck)' (pid 193) exited with status 0
 [    4.830764] init: cannot find 'icd_check', disabling 'exec 1 (icd_check)'
 [    4.844162] init: Starting service 'sysinit'...
 [    4.844712] init: (Loading properties from /data/local.prop took 0.00s.)
 [    4.845017] init: Starting service 'logd-reinit'...
 [    4.879078] logd.daemon: reinit
 [    4.903189] init: Service 'logd-reinit' (pid 200) exited with status 0
 [    4.909720] init: Starting service 'healthd'...
 [    4.910514] init: Starting service 'lmkd'...
 [    4.911216] init: Starting service 'servicemanager'...
 [    4.911979] init: Starting service 'surfaceflinger'...
 [    4.913169] init: Starting service 'rmt_storage'...
 [    4.918754] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio0/accept_ra': No such file or directory
 [    4.918815] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio1/accept_ra': No such file or directory
 [    4.918876] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio2/accept_ra': No such file or directory
 [    4.918907] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio3/accept_ra': No such file or directory
 [    4.918968] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio4/accept_ra': No such file or directory
 [    4.919029] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio5/accept_ra': No such file or directory
 [    4.919090] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio6/accept_ra': No such file or directory
 [    4.919151] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio7/accept_ra': No such file or directory
 [    4.919304] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb1/accept_ra': No such file or directory
 [    4.919365] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb2/accept_ra': No such file or directory
 [    4.919426] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb3/accept_ra': No such file or directory
 [    4.919548] init: write_file: Unable to open '/sys/devices/i2c-3/3-0024/cyttsp_update_fw': No such file or directory
 [    4.919609] init: write_file: Unable to open '/sys/devices/i2c-3/3-005b/update_fw': No such file or directory
 [    4.920006] init: Starting service 'qcamerasvr'...
 [    4.927117] binder: 202:202 transaction failed 29189, size 0-0
 [    4.963406] init: Starting service 'console'...
 [    4.964596] init: Starting service 'netd'...
 [    4.965359] init: Starting service 'debuggerd'...
 [    4.965847] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
 [    4.977018] init: Starting service 'ril-daemon'...
 [    4.978025] init: Starting service 'drm'...
 [    4.981748] init: Starting service 'media'...
 [    4.982725] init: Starting service 'installd'...
 [    4.983641] init: Starting service 'keystore'...
 [    4.984465] init: Starting service 'irsc_util'...
 [    4.985289] init: Starting service 'qmuxd'...
 [    4.986143] init: Starting service 'macloader'...
 [    4.987059] init: Starting service 'zygote'...
 [    4.987974] init: Starting service 'gatekeeperd'...
 [    5.038791] init: Starting service 'perfprofd'...
 [    5.039707] init: Starting service 'mpdecision'...
 [    5.040500] subsys-restart: restart_level_set(): Phase 3 behavior activated.
 [    5.072241] usb: enable_store enabled=0, !dev->enabled=1
 [    5.072241] usb:: ci13xxx_pullup is_active: 0
 [    5.072272] usb:: hw_device_state dma: 0
 [    5.072272] usb:: hw_device_state hw_read(CAP_USBINTR, ~0): 0
 [    5.072272] usb:: hw_device_state hw_read(CAP_USBCMD, USBCMD_RS): 0
 [    5.120585] init: Service 'macloader' (pid 221) exited with status 0
 [    5.202075] init: Service 'irsc_util' (pid 219) exited with status 0
 [    5.247428] warning: `rild' uses 32-bit capabilities (legacy support in use)
 [    5.452006] init: Service 'sysinit' (pid 199) exited with status 0
 [    5.563711] footswitch_enable: fs_gfx3d
 [    5.599847] footswitch_disable: fs_gfx3d
 [    5.602594] footswitch_enable: fs_gfx3d
 [    6.022585] init: Starting service 'bootanim'...
 [    6.032992] hdmi_msm hdmi_msm.1: hdmi_msm_hpd_feature: 1
 [    6.589073] pil pil0: q6: Brought out of reset
 [    6.623226] apr_tal:Q6 Is Up
 [    6.965908] [cam_ldo_power_on : 677] REAR CAMERA POWER ON!!
 [    6.965908] [s5c73m3] rear camera on 1
 [    6.965939] [s5c73m3] check GPIO_CAM_FLASH_SW : 1
 [    6.969815] 8921_lvs4: Failed to create debugfs directory
 [    6.971463] [s5c73m3] m2 check vddCore : 1150000
 [    6.971585] mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 96000000
 [    6.972684] CAM_ISP_CORE voltage is enabled to 1150 mV by selector value [38]
 [    6.973966] [s5c73m3] check GPIO_CAM_A_EN : 1
 [    6.983122] [s5c73m3] check GPIO_CAM_SENSOR_EN : 1
 [    6.988280] [cam_ldo_power_on : 677] REAR CAMERA POWER ON!!
 [    6.988280] [s5c73m3] rear camera on 2
 [    6.988280] [s5c73m3] check CAM_AF_EN : 1
 [    6.991454] 8921_lvs5: Failed to create debugfs directory
 [    6.992003] [s5c73m3] check CAM_MIPI_EN : 1
 [    6.994292] [s5c73m3] check ISP_RESET : 1
 [    7.023958] footswitch_enable: fs_vfe
 [    7.024538] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: msm_camera 
 [    7.044681] [s5c73m3_sensor_init:3371] Entered
 [    7.048313] [s5c73m3_sensor_init_probe:3319] Entered
 [    7.083045] [s5c73m3_read_vdd_core:3222] Entered
 [    7.107523] [s5c73m3_read_vdd_core:3259] vdd_core_info 0x20aa
 [    7.122112] [s5c73m3_read_vdd_core:3263] chip info#1 0x2118
 [    7.133496] [s5c73m3_read_vdd_core:3267] chip info#2 0xf654
 [    7.155775] [s5c73m3_read_vdd_core:3271] chip info#3 0xa1e5
 [    7.171310] Change core voltage
 [    7.173996] ISP CORE = 1100000
 [    7.179215] [s5c73m3_check_fw:3088] Enter
 [    7.201922] [s5c73m3_get_sensor_fw_version :  2739] sensor_fw = ZDFE02
 [    7.207996] [s5c73m3_get_phone_fw_version:2813] Entered
 [    7.226857] [s5c73m3_get_phone_fw_version:2941] Phone_version = ZDFI02(index=2)
 [    7.247825] [s5c73m3_get_phone_fw_version:2947] Exit
 [    7.251793] [s5c73m3_check_fw_date:3064] FW is same!!
 [    7.257897] [s5c73m3_check_fw_date:3077] Sensor_date = FE02, Phone_date = FI02
 [    7.257897] , compare result = -1
 [    7.267511] [s5c73m3_check_fw:3118] Loading From PhoneFW......
 [    7.274530] [s5c73m3_reset_module:423] E
 [    7.277460] [s5c73m3] check ISP_RESET : 0
 [    7.283534] [s5c73m3] check ISP_RESET : 1
 [    7.285945] [s5c73m3_reset_module:439] X
 [    7.289088] [s5c73m3_SPI_booting:2292] Entered
 [    7.306546] [s5c73m3_load_fw:2227] Entered
 [    7.309690] index 2 is opened
 [    7.309690] fsize is 379936
 [    7.317076] [s5c73m3_spi_write:152] Entered
 [    7.333068] [s5c73m3_spi_write:153] count = 5 extra = 52256
 [    7.409095] [s5c73m3_spi_write:181] Finish!!
 [    7.412482] [s5c73m3_load_fw:2278] Exit
 [    7.426247] [s5c73m3_check_fw:3197] Exit
 [    7.444529] pil pil2: modem_fw: Brought out of reset
 [    7.605280] [s5c73m3_sensor_config:3654] Entered
 [    7.608972] [s5c73m3_sensor_config :  3662] s5c73m3_ioctl, cfgtype = 29, mode = 0
 [    7.633511] [s5c73m3_sensor_config :  3673] Invalid cfgtype
 [    7.696535] type=1400 audit(1464227052.234:3): avc: denied { write } for pid=207 comm="mm-qcamera-daem" name="/" dev="mmcblk0p15" ino=2 scontext=u:r:mm-qcamerad:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
 [    7.696658] type=1400 audit(1464227052.234:4): avc: denied { add_name } for pid=207 comm="mm-qcamera-daem" name="cam_socket0" scontext=u:r:mm-qcamerad:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
 [    7.701754] msm_enqueue: queue control new max is 1
 [    7.775858] Entered, width 1280, height 720
 [    7.776133] Entered, width : 1280, height : 720
 [    7.776407] [s5c73m3_set_jpeg_size:1961] Entered, width : 3264, height : 2448
 [    7.795574] [sensor_native_control:3487] Entered EXT_CAM_AF mode 1
 [    7.819655] [s5c73m3_set_af_mode:1611] Entered, new mode 0, old mode 0
 [    7.829513] Entered, zoom 0
 [    7.840958] Entered, mode 0
 [    7.840958] [s5c73m3_set_scene_mode:1268] default scene mode
 [    7.854051] E, value 0
 [    7.858080] Entered, effect 0
 [    7.860094] [s5c73m3_set_antibanding:522] E, value 2
 [    7.877674] Entered, ev 4
 [    7.879719] Entered, 1
 [    7.881489] Entered, camera mode fps 31
 [    7.881489] set default fps
 [    7.885151] Entered, iso 0
 [    7.902609] Entered, width 1280, height 720
 [    7.907553] Entered, width : 1280, height : 720
 [    7.909140] msm_close Closing down instance edac0000 
 [    7.924462] msm_close after pcam_inst free
 [    7.929803] msm_close reached return, pcam still not freed
 [    7.945429] msm_close Closing down instance edac0800 
 [    7.953547] msm_close after pcam_inst free
 [    7.956874] msm_close reached return, pcam still not freed
 [    7.991545] msm_close Closing down instance ede1f400 
 [    8.007874] msm_close after pcam_inst free
 [    8.011933] msm_ioctl_config: no active pcam instance.
 [    8.020936] msm_close releasing pcam->mctl
 [    8.024416] footswitch_disable: fs_vfe
 [    8.053319] [s5c73m3_sensor_release:3683] Entered
 [    8.057042] [s5c73m3_set_af_softlanding:3306] Entered
 [    8.082191] [cam_ldo_power_off : 817] REAR CAMERA POWER OFF!!
 [    8.092873] [s5c73m3] check GPIO_CAM_FLASH_SW : 0
 [    8.093972] msm_release_ion_client Calling ion_client_destroy 
 [    8.099313] msm_close reached return, pcam still not freed
 [    8.112009] [cam_ldo_power_on : 677] FRONT CAMERA POWER ON!!
 [    8.112040] [s5k6a3yx] check GPIO_CAM_A_EN : 1
 [    8.124126] [cam_ldo_power_on : 677] FRONT CAMERA POWER ON!!
 [    8.124126] [s5k6a3yx] check CAM2_RST_N : 1
 [    8.128795] 8921_lvs5: Failed to create debugfs directory
 [    8.154585] footswitch_enable: fs_vfe
 [    8.155165] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: msm_camera 
 [    8.206806] Start calibrating....
 [    8.207965] Ajusting Calibration data to the sensor!!
 [    8.213398] abort stream request 0
 [    8.371829] msm_close Closing down instance eda78c00 
 [    8.378971] msm_close after pcam_inst free
 [    8.382359] msm_close reached return, pcam still not freed
 [    8.403113] msm_close Closing down instance eda78400 
 [    8.407233] msm_close after pcam_inst free
 [    8.411353] msm_close reached return, pcam still not freed
 [    8.428933] msm_close Closing down instance eda78800 
 [    8.442484] msm_close after pcam_inst free
 [    8.447306] msm_ioctl_config: no active pcam instance.
 [    8.451609] msm_close releasing pcam->mctl
 [    8.455760] footswitch_disable: fs_vfe
 [    8.461742] [cam_ldo_power_off : 817] FRONT CAMERA POWER OFF!!
 [    8.465344] msm_release_ion_client Calling ion_client_destroy 
 [    8.470044] msm_close reached return, pcam still not freed
 [   11.980589] pil pil1: modem: Brought out of reset
 [   12.715641] Notify: smsm init
 [   14.591606] msm8960_i2s_startup
 [   14.593316] apr_tal: SMD_EVENT_OPEN
 [   14.599023] msm8660_i2s_hw_params Codec Clock 0xc0d90814 ; Rx Bit Clock c0d926c8
 [   14.658141] msm8960_i2s_shutdown Codec Clock 0xc0d90814 ; Rx Bit Clock c0d926c8
 [   15.862414] apr_tal:Modem Is Up
 [   16.556722] sps:BAM 0x124c2000 is registered.
 [   16.556844] sps:BAM 0x124c2000 enabled: ver:0x5, number of pipes:6
 [   17.285975] zram: 594 (system_server) Attribute mem_used_total (and others) will be removed. See zram documentation.
 [   17.534594] request_suspend_state: wakeup (3->0) at 17531640887 (2016-05-26 01:44:22.078366864 UTC)
 [   21.043094] fsa9485 11-0025: fsa9485_delayed_audio
 [   21.043918] fsa9485 11-0025: dev1: 0x4, dev2: 0x0 adc : 0x1f
 [   21.043918] fsa9485 11-0025: usb connect
 [   21.043918] fsa9485_usb_cb attached 1
 [   21.043949] fsa9485_usb_cb set vbus state
 [   21.043949] msm_otg msm_otg: MUIC: BSV set
 [   21.043979] sec-battery sec-battery: sec_bat_set_property: cable was changed(4), prev(1)
 [   23.262963] dummy0: no IPv6 routers present
 [   23.329803] init: property_set("ro.ril.svdo", "true") failed
 [   30.283351] accel_open_calibration: Can't open calibration file
 [   30.288753] Sensors unset: 7fff
 [   30.394658] light_enable_store,new_value=1
 [   30.524095] proximity_enable_store,new_value=1, prox_cal 0
 [   30.834060] light_enable_store,new_value=0
 [   30.834671] proximity_enable_store,new_value=0, prox_cal 0
 [   32.010529] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
 [   32.010529] lowmemorykiller: oom_adj 0 => oom_score_adj 0
 [   32.010560] lowmemorykiller: oom_adj 1 => oom_score_adj 58
 [   32.010560] lowmemorykiller: oom_adj 2 => oom_score_adj 117
 [   32.010560] lowmemorykiller: oom_adj 3 => oom_score_adj 176
 [   32.010560] lowmemorykiller: oom_adj 9 => oom_score_adj 529
 [   32.010590] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
 [   33.383213] usb: enable_store enabled=0, !dev->enabled=1
 [   33.383244] usb:: ci13xxx_pullup is_active: 0
 [   33.383244] usb:: hw_device_state dma: 0
 [   33.383244] usb:: hw_device_state hw_read(CAP_USBINTR, ~0): 0
 [   33.383274] usb:: hw_device_state hw_read(CAP_USBCMD, USBCMD_RS): 0
 [   33.383885] usb: enable_store enabled=0, !dev->enabled=1
 [   33.383915] usb:: ci13xxx_pullup is_active: 0
 [   33.383915] usb:: hw_device_state dma: 0
 [   33.383915] usb:: hw_device_state hw_read(CAP_USBINTR, ~0): 0
 [   33.383915] usb:: hw_device_state hw_read(CAP_USBCMD, USBCMD_RS): 0
 [   33.384220] usb: functions_store buff=mtp,acm
 [   33.384251] usb: android_enable_function name=mtp
 [   33.384251] usb: android_enable_function name=acm
 [   33.384373] usb: enable_store enabled=1, !dev->enabled=1
 [   33.384404] usb: enable_store f:mtp
 [   33.384404] usb: enable_store f:acm
 [   33.384404] usb: acm is enabled. (bcdDevice=0x400)
 [   33.384404] usb: enable_store vendor=4e8,product=6860,bcdDevice=400
 [   33.384434] ,Class=0,SubClass=0,Protocol=0
 [   33.384434] usb: enable_store next cmd : usb_add_config
 [   33.384434] usb: android_bind_enabled_functions f:mtp
 [   33.384465] mtp_bind_config
 [   33.384495] usb: android_bind_enabled_functions f:acm
 [   33.385136] usb:: ci13xxx_pullup is_active: 1
 [   33.385136] usb:: hw_device_state dma: aeee2000
 [   33.385167] usb:: hw_device_state hw_read(CAP_ENDPTLISTADDR, ~0): aeee2000
 [   33.385167] usb:: hw_device_state hw_read(CAP_USBINTR, ~0): 147
 [   33.385167] usb:: hw_device_state hw_read(CAP_USBCMD, USBCMD_RS): 1
 [   33.439096] usb: state_show buf=DISCONNECTED
 [   33.440103] acc_open
 [   33.440134] acc_release
 [   33.490340] usb:: isr_reset_handler udc: eecee000
 [   33.490340] usb: composite_disconnect
 [   33.490370] usb: android_disconnect cable state (1)
 [   33.490614] usb: android_work config=  (null),connected=0,sw_connected=0
 [   33.490614] android_work: android_work: did not send uevent (0 0   (null))
 [   33.641812] usb: count_multi_config ready multi
 [   33.641843] usb: GET_DES
 [   33.641934] usb: android_work config=  (null),connected=1,sw_connected=0
 [   33.642057] android_work: android_work: sent uevent USB_STATE=CONNECTED
 [   33.645414] usb:: isr_reset_handler udc: eecee000
 [   33.645444] usb: composite_disconnect
 [   33.645444] usb: android_disconnect cable state (1)
 [   33.645505] usb: android_work config=  (null),connected=0,sw_connected=1
 [   33.645627] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
 [   33.805768] usb: count_multi_config ready multi
 [   33.805768] usb: GET_DES
 [   33.805890] usb: android_work config=  (null),connected=1,sw_connected=0
 [   33.805951] usb: set_config_number single config
 [   33.805951] usb: set_interface_count next_interface_id=1
 [   33.806073] usb: set_config_number single config
 [   33.806104] usb: set_interface_count next_interface_id=1
 [   33.806195] android_work: android_work: sent uevent USB_STATE=CONNECTED
 [   33.806226] usb: set_config_number multi config_num=1(zero base)
 [   33.806256] usb: set_interface_count next_interface_id=3
 [   33.806348] usb: set_config_number multi config_num=1(zero base)
 [   33.806348] usb: set_interface_count next_interface_id=3
 [   33.807141] android_usb gadget: high-speed config #1: android_usb
 [   33.807172] usb: SET_CON
 [   33.812208] usb: android_work config=ed093200,connected=1,sw_connected=1
 [   33.863085] android_work: android_work: sent uevent USB_STATE=CONFIGURED
 [   33.917778] vibrator: pwm default value: 50
 [   33.918174] vibrator: pwm min value: 0
 [   33.918602] vibrator: pwm max value: 100
 [   33.919029] vibrator: pwm threshold value: 75
 [   33.920006] vibrator: pwm default value: 50
 [   33.920555] vibrator: pwm min value: 0
 [   33.921165] vibrator: pwm max value: 100
 [   33.921623] vibrator: pwm threshold value: 75
 [   33.922600] vibrator: pwm default value: 50
 [   33.923119] vibrator: pwm min value: 0
 [   33.923607] vibrator: pwm max value: 100
 [   33.924095] vibrator: pwm threshold value: 75
 [   33.926537] [VIB] pwm_value_store: pwm_val=50
 [   33.933129] msm_ta_detect_work: USB exit ta detection - frindex
 [   35.490798] light_enable_store,new_value=1
 [   35.492751] cm36651_poll_delay_store, poll_delay = 250000000
 [   40.089455] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
 [   40.090920] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
 [   40.094155] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
 [   41.109018] apr_tal: SMD_EVENT_OPEN
 [   41.112284] evrc_in_open:session id 1: NT mode encoder success
 [   41.112284] evrc_in_open:session id 1: success
 [   41.134900] audio_in_release: session id 1
 [   41.139020] apr_tal: SMD_EVENT_OPEN
 [   41.141614] qcelp_in_open:session id 1: NT mode encoder success
 [   41.141645] qcelp_in_open:session id 1: success
 [   41.168777] audio_in_release: session id 1
 [   41.177353] msm_vidc_venc: Inside vid_enc_open()
 [   41.177353] 
 [   41.177353]  msm_vidc_enc: Inside vid_enc_open_client()
 [   41.177384] 
 [   41.177384] res_trk_download_firmware(): Request firmware download
 [   41.204089] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: vidc 
 [   41.214527] footswitch_enable: fs_ved
 [   41.216877] 
 [   41.216877] VIDC: vidc_freq = 266670000, req_perf_lvl = 244801, set_perf_lvl = 244801
 [   41.246604] fw_version 8:30:2013
 [   41.247581] 
 [   41.247581]  msm_vidc_enc: Inside vid_enc_release()
 [   41.247611] 
 [   41.247611]  msm_vidc_enc: Inside vid_enc_close_client()
 [   41.267236] footswitch_disable: fs_ved
 [   41.268762] 
 [   41.268762]  msm_vidc_enc: Return from vid_enc_release()
 [   41.274103] msm_vidc_venc: Inside vid_enc_open()
 [   41.274103] 
 [   41.274103]  msm_vidc_enc: Inside vid_enc_open_client()
 [   41.274133] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: vidc 
 [   41.295009] footswitch_enable: fs_ved
 [   41.298855] 
 [   41.298855] VIDC: vidc_freq = 266670000, req_perf_lvl = 244801, set_perf_lvl = 244801
 [   41.324431] fw_version 8:30:2013
 [   41.325225] 
 [   41.325225]  msm_vidc_enc: Inside vid_enc_release()
 [   41.325255] 
 [   41.325255]  msm_vidc_enc: Inside vid_enc_close_client()
 [   41.358553] footswitch_disable: fs_ved
 [   41.359713] 
 [   41.359713]  msm_vidc_enc: Return from vid_enc_release()
 [   41.360964] msm_vidc_venc: Inside vid_enc_open()
 [   41.360994] 
 [   41.360994]  msm_vidc_enc: Inside vid_enc_open_client()
 [   41.361025] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: vidc 
 [   41.374118] footswitch_enable: fs_ved
 [   41.383549] 
 [   41.383549] VIDC: vidc_freq = 266670000, req_perf_lvl = 244801, set_perf_lvl = 244801
 [   41.403326] fw_version 8:30:2013
 [   41.404120] 
 [   41.404150]  msm_vidc_enc: Inside vid_enc_release()
 [   41.404150] 
 [   41.404150]  msm_vidc_enc: Inside vid_enc_close_client()
 [   41.428048] footswitch_disable: fs_ved
 [   41.429207] 
 [   41.429207]  msm_vidc_enc: Return from vid_enc_release()
 [   41.443338] msm_vidc_dec: Inside vid_dec_open()
 [   41.443369] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: vidc 
 [   41.474347] footswitch_enable: fs_ved
 [   41.477796] 
 [   41.477796] VIDC: vidc_freq = 266670000, req_perf_lvl = 244801, set_perf_lvl = 244801
 [   41.503555] fw_version 8:30:2013
 [   41.510849] msm_vidc_dec: Inside vid_dec_release()
 [   41.527056] footswitch_disable: fs_ved
 [   41.528277] msm_vidc_dec: Return from vid_dec_release()
 [   41.530657] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: vidc 
 [   41.543842] footswitch_enable: fs_ved
 [   41.554097] 
 [   41.554097] VIDC: vidc_freq = 266670000, req_perf_lvl = 244801, set_perf_lvl = 244801
 [   41.584037] pn544_dev_ioctl power on, irq=1
 [   41.612818] pn544_dev_ioctl power off, irq=1
 [   41.623164] pn544_dev_ioctl power on, irq=1
 [   41.685334] pil pil5: vidc: Brought out of reset
 [   41.703280] fw_version 3:30:2012
 [   41.703433] Securing...
 [   41.724553] msm_vidc_dec: Inside vid_dec_release_secure()
 [   41.746101] Unsecuring....
 [   41.796947] msm_vidc_dec: Return from vid_dec_release_secure()
 [   41.798992] msm_vidc_dec: Inside vid_dec_open()
 [   41.798992] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: vidc 
 [   41.807965] 
 [   41.807965] VIDC: vidc_freq = 266670000, req_perf_lvl = 244801, set_perf_lvl = 244801
 [   41.833328] fw_version 8:30:2013
 [   41.839768] msm_vidc_dec: Inside vid_dec_release()
 [   41.858324] msm_vidc_dec: Return from vid_dec_release()
 [   41.859514] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: vidc 
 [   41.868090] 
 [   41.868121] VIDC: vidc_freq = 266670000, req_perf_lvl = 244801, set_perf_lvl = 244801
 [   41.957576] pil pil5: vidc: Brought out of reset
 [   41.973264] fw_version 3:30:2012
 [   41.973416] Securing...
 [   41.991423] msm_vidc_dec: Inside vid_dec_release_secure()
 [   42.003021] Unsecuring....
 [   42.079169] msm_vidc_dec: Return from vid_dec_release_secure()
 [   42.081245] msm_vidc_dec: Inside vid_dec_open()
 [   42.081245] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: vidc 
 [   42.094552] 
 [   42.094552] VIDC: vidc_freq = 266670000, req_perf_lvl = 244801, set_perf_lvl = 244801
 [   42.123302] fw_version 8:30:2013
 [   42.126171] msm_vidc_dec: Inside vid_dec_release()
 [   42.149336] msm_vidc_dec: Return from vid_dec_release()
 [   42.150953] msm_vidc_dec: Inside vid_dec_open()
 [   42.150953] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: vidc 
 [   42.166274] 
 [   42.166274] VIDC: vidc_freq = 266670000, req_perf_lvl = 244801, set_perf_lvl = 244801
 [   42.183580] fw_version 8:30:2013
 [   42.194628] msm_vidc_dec: Inside vid_dec_release()
 [   42.218129] msm_vidc_dec: Return from vid_dec_release()
 [   42.219471] msm_vidc_dec: Inside vid_dec_open()
 [   42.219471] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: vidc 
 [   42.227285] 
 [   42.227285] VIDC: vidc_freq = 266670000, req_perf_lvl = 244801, set_perf_lvl = 244801
 [   42.245017] fw_version 8:30:2013
 [   42.251304] msm_vidc_dec: Inside vid_dec_release()
 [   42.269433] msm_vidc_dec: Return from vid_dec_release()
 [   42.270532] msm_vidc_dec: Inside vid_dec_open()
 [   42.270563] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: vidc 
 [   42.290950] 
 [   42.290950] VIDC: vidc_freq = 266670000, req_perf_lvl = 244801, set_perf_lvl = 244801
 [   42.313383] fw_version 8:30:2013
 [   42.325011] msm_vidc_dec: Inside vid_dec_release()
 [   42.348329] msm_vidc_dec: Return from vid_dec_release()
 [   42.351503] msm_vidc_dec: Inside vid_dec_open()
 [   42.351533] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: vidc 
 [   42.359743] 
 [   42.359743] VIDC: vidc_freq = 266670000, req_perf_lvl = 244801, set_perf_lvl = 244801
 [   42.383885] fw_version 8:30:2013
 [   42.399725] msm_vidc_dec: Inside vid_dec_release()
 [   42.417427] msm_vidc_dec: Return from vid_dec_release()
 [   42.419044] msm_vidc_dec: Inside vid_dec_open()
 [   42.419075] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: vidc 
 [   42.435922] 
 [   42.435922] VIDC: vidc_freq = 266670000, req_perf_lvl = 244801, set_perf_lvl = 244801
 [   42.438669] [cam_ldo_power_on : 677] REAR CAMERA POWER ON!!
 [   42.438669] [s5c73m3] rear camera on 1
 [   42.438699] [s5c73m3] check GPIO_CAM_FLASH_SW : 1
 [   42.439798] 8921_lvs4: Failed to create debugfs directory
 [   42.441538] [s5c73m3] m2 check vddCore : 1100000
 [   42.442728] CAM_ISP_CORE voltage is enabled to 1100 mV by selector value [33]
 [   42.443979] [s5c73m3] check GPIO_CAM_A_EN : 1
 [   42.444987] [s5c73m3] check GPIO_CAM_SENSOR_EN : 1
 [   42.447276] [cam_ldo_power_on : 677] REAR CAMERA POWER ON!!
 [   42.447306] [s5c73m3] rear camera on 2
 [   42.447306] [s5c73m3] check CAM_AF_EN : 1
 [   42.451274] 8921_lvs5: Failed to create debugfs directory
 [   42.451762] [s5c73m3] check CAM_MIPI_EN : 1
 [   42.453654] fw_version 8:30:2013
 [   42.454661] [s5c73m3] check ISP_RESET : 1
 [   42.455363] msm_vidc_dec: Inside vid_dec_release()
 [   42.477369] msm_vidc_dec: Return from vid_dec_release()
 [   42.483992] footswitch_enable: fs_vfe
 [   42.485609] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: msm_camera 
 [   42.506332] [s5c73m3_sensor_init:3371] Entered
 [   42.509995] [s5c73m3_sensor_init_probe:3319] Entered
 [   42.523180] [s5c73m3_check_fw:3088] Enter
 [   42.537738] [s5c73m3_get_sensor_fw_version :  2739] sensor_fw = ZDFE02
 [   42.544788] [s5c73m3_get_phone_fw_version:2813] Entered
 [   42.551228] [s5c73m3_get_phone_fw_version:2941] Phone_version = ZDFI02(index=2)
 [   42.561727] [s5c73m3_get_phone_fw_version:2947] Exit
 [   42.566671] [s5c73m3_check_fw_date:3064] FW is same!!
 [   42.575919] [s5c73m3_check_fw_date:3077] Sensor_date = FE02, Phone_date = FI02
 [   42.575919] , compare result = -1
 [   42.587669] [s5c73m3_check_fw:3118] Loading From PhoneFW......
 [   42.592827] [s5c73m3_reset_module:423] E
 [   42.600274] [s5c73m3] check ISP_RESET : 0
 [   42.601312] [s5c73m3] check ISP_RESET : 1
 [   42.603754] [s5c73m3_reset_module:439] X
 [   42.607508] [s5c73m3_SPI_booting:2292] Entered
 [   42.622646] [s5c73m3_load_fw:2227] Entered
 [   42.626369] index 2 is opened
 [   42.626400] fsize is 379936
 [   42.626918] [s5c73m3_spi_write:152] Entered
 [   42.631649] [s5c73m3_spi_write:153] count = 5 extra = 52256
 [   42.710514] [s5c73m3_spi_write:181] Finish!!
 [   42.713902] [s5c73m3_load_fw:2278] Exit
 [   42.720189] [s5c73m3_check_fw:3197] Exit
 [   42.897939] [s5c73m3_sensor_config:3654] Entered
 [   42.901602] [s5c73m3_sensor_config :  3662] s5c73m3_ioctl, cfgtype = 29, mode = 0
 [   42.921898] [s5c73m3_sensor_config :  3673] Invalid cfgtype
 [   42.961971] type=1400 audit(1464227087.462:5): avc: denied { write } for pid=207 comm="mm-qcamera-daem" name="/" dev="mmcblk0p15" ino=2 scontext=u:r:mm-qcamerad:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
 [   42.962124] type=1400 audit(1464227087.462:6): avc: denied { remove_name } for pid=207 comm="mm-qcamera-daem" name="cam_socket0" dev="mmcblk0p15" ino=16 scontext=u:r:mm-qcamerad:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
 [   42.962246] type=1400 audit(1464227087.462:7): avc: denied { add_name } for pid=207 comm="mm-qcamera-daem" name="cam_socket0" scontext=u:r:mm-qcamerad:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
 [   43.007355] Entered, width 1280, height 720
 [   43.007660] Entered, width : 1280, height : 720
 [   43.007935] [s5c73m3_set_jpeg_size:1961] Entered, width : 3264, height : 2448
 [   43.020998] [sensor_native_control:3487] Entered EXT_CAM_AF mode 1
 [   43.027224] [s5c73m3_set_af_mode:1611] Entered, new mode 0, old mode 0
 [   43.038425] Entered, zoom 0
 [   43.049504] Entered, mode 0
 [   43.049504] [s5c73m3_set_scene_mode:1268] default scene mode
 [   43.061498] E, value 0
 [   43.065679] Entered, effect 0
 [   43.067907] [s5c73m3_set_antibanding:522] E, value 2
 [   43.079658] Entered, ev 4
 [   43.081336] Entered, 1
 [   43.083229] Entered, camera mode fps 31
 [   43.083229] set default fps
 [   43.091988] Entered, iso 0
 [   43.099282] msm_close Closing down instance eda78000 
 [   43.104379] msm_close after pcam_inst free
 [   43.107675] msm_close reached return, pcam still not freed
 [   43.113596] msm_close Closing down instance eda78800 
 [   43.118052] msm_close after pcam_inst free
 [   43.122264] msm_close reached return, pcam still not freed
 [   43.130352] msm_close Closing down instance ec806400 
 [   43.134442] msm_close after pcam_inst free
 [   43.139111] msm_ioctl_config: no active pcam instance.
 [   43.143964] msm_close releasing pcam->mctl
 [   43.147993] footswitch_disable: fs_vfe
 [   43.153792] [s5c73m3_sensor_release:3683] Entered
 [   43.157546] [s5c73m3_set_af_softlanding:3306] Entered
 [   43.178391] [cam_ldo_power_off : 817] REAR CAMERA POWER OFF!!
 [   43.188280] [s5c73m3] check GPIO_CAM_FLASH_SW : 0
 [   43.189348] msm_release_ion_client Calling ion_client_destroy 
 [   43.194384] msm_close reached return, pcam still not freed
 [   43.308713] [cam_ldo_power_on : 677] FRONT CAMERA POWER ON!!
 [   43.308713] [s5k6a3yx] check GPIO_CAM_A_EN : 1
 [   43.310819] [cam_ldo_power_on : 677] FRONT CAMERA POWER ON!!
 [   43.310819] [s5k6a3yx] check CAM2_RST_N : 1
 [   43.311918] 8921_lvs5: Failed to create debugfs directory
 [   43.344178] footswitch_enable: fs_vfe
 [   43.344819] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: name: msm_camera 
 [   43.367190] Start calibrating....
 [   43.368319] Ajusting Calibration data to the sensor!!
 [   43.369204] abort stream request 0
 [   43.441568] msm_close Closing down instance ec341800 
 [   43.446268] msm_close after pcam_inst free
 [   43.450328] msm_close reached return, pcam still not freed
 [   43.466198] msm_close Closing down instance ec341c00 
 [   43.475873] msm_close after pcam_inst free
 [   43.479322] msm_close reached return, pcam still not freed
 [   43.489851] msm_close Closing down instance ec432c00 
 [   43.494124] msm_close after pcam_inst free
 [   43.504104] msm_ioctl_config: no active pcam instance.
 [   43.512650] msm_close releasing pcam->mctl
 [   43.516801] footswitch_disable: fs_vfe
 [   43.535144] [cam_ldo_power_off : 817] FRONT CAMERA POWER OFF!!
 [   43.539020] msm_release_ion_client Calling ion_client_destroy 
 [   43.548329] msm_close reached return, pcam still not freed
 [   45.268396] vibrator: pwm default value: 50
 [   45.269403] vibrator: pwm min value: 0
 [   45.269769] vibrator: pwm max value: 100
 [   45.270135] vibrator: pwm threshold value: 75
 [   45.304623] [VIB] pwm_value_store: pwm_val=50
 [   47.023470] Sensors set: 70
 [   47.032168] <6>MPL-accmpu6050_set_odr:34
 [   47.032290] <6>MPL-accODR : 28571 (34)mHz
 [   47.033419] Sensors unset: 7fff
 [   47.034335] Sensors set: 70
 [   47.041385] <6>MPL-accmpu6050_set_odr:69
 [   47.041538] <6>MPL-accODR : 14285 (69)mHz
 [   47.042606] TIMERIRQ_START : period=70
 [   47.043491] TIMERIRQ_START : period=70
 [   47.803937] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb1/accept_ra': No such file or directory
 [   47.804028] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb2/accept_ra': No such file or directory
 [   47.804089] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb3/accept_ra': No such file or directory
 [   48.729345] binder: 594:602 refcount change on invalid ref 182
 [   50.117045] init: Service 'bootanim' (pid 278) exited with status 0
 [   50.256432] [LED_blink_store] is "android.display" (pid 613)
 [   50.369723] init: write_file: Unable to open '/sys/block/mmcblk1/queue/scheduler': No such file or directory
 [   50.369906] init: write_file: Unable to open '/sys/block/mmcblk1/queue/iosched/slice_idle': No such file or directory
 [   50.371280] init: Starting service 'exec 2 (/system/bin/sh)'...
 [   50.425576] mipi_samsung_disp_acl_store: Invalid argument!!
 [   50.449961] mdnie [mdnie set]inmdnieset_outdoor_file_cmd_store, input value = 0
 [   50.496230] init: Service 'exec 2 (/system/bin/sh)' (pid 1677) exited with status 255
 [   50.505508] mdnie [mdnie set]inmdnieset_outdoor_file_cmd_store, input value = 0
 [   50.518846] mdnie [mdnie set]inmdnieset_outdoor_file_cmd_store, input value = 0
 [   50.771921] vibrator: pwm default value: 50
 [   50.777079] vibrator: pwm min value: 0
 [   50.780680] vibrator: pwm max value: 100
 [   50.795879] vibrator: pwm threshold value: 75
 [   50.812025] vibrator: pwm default value: 50
 [   50.816786] vibrator: pwm min value: 0
 [   50.820418] vibrator: pwm max value: 100
 [   50.833663] vibrator: pwm threshold value: 75
 [   50.853990] vibrator: pwm default value: 50
 [   50.858293] vibrator: pwm min value: 0
 [   50.861895] vibrator: pwm max value: 100
 [   50.868060] vibrator: pwm threshold value: 75
 [   50.874164] type=1400 audit(1464227095.410:8): avc: denied { read } for pid=1713 comm="stack_manager" name=".bt_nv.bin" dev="mmcblk0p16" ino=15 scontext=u:r:bluetooth:s0 tcontext=u:object_r:unlabeled:s0 tclass=file permissive=1
 [   50.874896] type=1400 audit(1464227095.410:9): avc: denied { open } for pid=1713 comm="stack_manager" name=".bt_nv.bin" dev="mmcblk0p16" ino=15 scontext=u:r:bluetooth:s0 tcontext=u:object_r:unlabeled:s0 tclass=file permissive=1
 [   50.912314] vibrator: pwm default value: 50
 [   50.913657] vibrator: pwm min value: 0
 [   50.914115] vibrator: pwm max value: 100
 [   50.914603] vibrator: pwm threshold value: 75
 [   50.916526] [VIB] pwm_value_store: pwm_val=50
 [   55.963222] msm8960_i2s_startup
 [   55.965145] apr_tal: SMD_EVENT_OPEN
 [   55.968502] msm8660_i2s_hw_params Codec Clock 0xc0d90814 ; Rx Bit Clock c0d926c8
 [   55.970975] 
 [   55.971005] 
 [   55.971005] Dongle Host Driver, version 1.141.44.4 (r)
 [   55.971005] Compiled from 
 [   55.971036] wl_android_wifi_on in
 [   55.971036] wifi_platform_set_power = 1
 [   55.971036] ------------------------------------------------
 [   55.971066] ------------------------------------------------
 [   55.971066] brcm_wlan_power Enter: power on
 [   55.983854] ACDB=> get_hw_delay Invalid delay/ delay entries
 [   55.988554] ACDB=> get_hw_delay: Path = 0 samplerate = 48000 usec = 3987193140 status -22
 [   56.003387] msm8960_enable_codec_ext_clk: enable = 1
 [   56.245963] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
 [   56.249229] mmc2: queuing unknown CIS tuple 0x80 (6 bytes)
 [   56.351289] DHD: dongle ram size is set to 524288(orig 524288) at 0x0
 [   56.352662] CHIP VER = [0x3]
 [   56.352693] ----- CHIP bcm4334_B2 -----
 [   56.352693] dhdsdio_download_firmware: firmware path=/system/etc/wifi/bcmdhd_sta.bin_b2, nvram path=/system/etc/wifi/nvram_net.txt
 [   56.469555] sdioh_request_buffer: [1] doing memory copy buf=ee7ca000, len=1146
 [   56.705905] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
 [   56.713871] dhd_wl_ioctl: WLC_GET_VAR: cisdump, ret = -23
 [   56.713871] [WIFI_SEC] dhd_check_module_cid: CIS reading failed, ret=-23
 [   56.725713] Firmware up: op_mode=0x0015, MAC=5c:6f:b2
 [   56.730352] [WIFI_SEC] sec_control_pm: POWER_VAL = 1 
 [   56.730383] dhdcdc_set_ioctl: SET PM to 2
 [   56.741553] Firmware version = wl0: Mar 27 2014 20:30:40 version 6.10.58.105.2 (B2 NCHO WAPI) FWID 01-79482a20
 [   56.741736] [WIFI_SEC] save .wifiver.info file.
 [   56.742469] dhd_wl_ioctl: WLC_SET_VAR: ampdu_hostreorder, ret = -23
 [   56.742499] dhd_preinit_ioctls wl ampdu_hostreorder failed -23
 [   56.743659] dhd_wl_ioctl: WLC_GET_VAR: pfnlbest, ret = -23
 [   56.744361] dhd_wl_ioctl: WLC_GET_VAR: cisdump, ret = -23
 [   56.744391] [WIFI_SEC] dhd_check_module_mac: Check module mac by legacy FW : 5c:6f:b2
 [   56.744483] [WIFI_SEC] Check Mac address in .mac.info 
 [   56.844224] init: Starting service 'p2p_supplicant'...
 [   58.112528] mtp_open
 [   59.351960] msm8960_i2s_shutdown Codec Clock 0xc0d90814 ; Rx Bit Clock c0d926c8
 [   59.361452] msm8960_enable_codec_ext_clk: enable = 0
 [   60.510270] msm8960_i2s_startup
 [   60.515244] msm8660_i2s_hw_params Codec Clock 0xc0d90814 ; Rx Bit Clock c0d926c8
 [   60.530993] ACDB=> get_hw_delay Invalid delay/ delay entries
 [   60.535785] ACDB=> get_hw_delay: Path = 0 samplerate = 48000 usec = 3987193140 status -22
 [   60.546467] msm8960_enable_codec_ext_clk: enable = 1
 [   63.899191] msm8960_i2s_shutdown Codec Clock 0xc0d90814 ; Rx Bit Clock c0d926c8
 [   63.910849] msm8960_enable_codec_ext_clk: enable = 0
 [   67.082984] p2p0: no IPv6 routers present
 [   68.774027] msm8960_i2s_startup
 [   68.779063] msm8660_i2s_hw_params Codec Clock 0xc0d90814 ; Rx Bit Clock c0d926c8
 [   68.795544] ACDB=> get_hw_delay Invalid delay/ delay entries
 [   68.800305] ACDB=> get_hw_delay: Path = 0 samplerate = 48000 usec = 3987193140 status -22
 [   68.811139] msm8960_enable_codec_ext_clk: enable = 1
 [   72.173447] msm8960_i2s_shutdown Codec Clock 0xc0d90814 ; Rx Bit Clock c0d926c8
 [   72.182878] msm8960_enable_codec_ext_clk: enable = 0
 [   74.303982] dhd_wl_ioctl: WLC_IOCTL: cmd: 23, ret = -17
 [   75.089607] wl_bss_connect_done succeeded with 2c:36:ee
 [   75.091500] ETHER_TYPE_802_1X: ver 2, type 3, replay 0
 [   75.092293] ETHER_TYPE_802_1X: ver 2, type 3, replay 0
 [   75.095284] dhdcdc_set_ioctl: SET PM to 0
 [   75.113139] ETHER_TYPE_802_1X [TX]: ver 1, type 3, replay 0
 [   75.121135] ETHER_TYPE_802_1X: ver 2, type 3, replay 1
 [   75.122050] ETHER_TYPE_802_1X [TX]: ver 1, type 3, replay 1
 [   75.130596] wl_bss_connect_done succeeded with 2c:36:ee
 [   75.316984] dhdcdc_set_ioctl: SET PM to 0
 [   75.420357] dhdcdc_set_ioctl: SET PM to 2
 [   76.086769] mdnie [mdnie set]inmdnieset_outdoor_file_cmd_store, input value = 0
 [   76.500564] msm8960_i2s_startup
 [   76.505569] msm8660_i2s_hw_params Codec Clock 0xc0d90814 ; Rx Bit Clock c0d926c8
 [   76.521989] ACDB=> get_hw_delay Invalid delay/ delay entries
 [   76.526812] ACDB=> get_hw_delay: Path = 0 samplerate = 48000 usec = 3987193140 status -22
 [   76.538104] msm8960_enable_codec_ext_clk: enable = 1
 [   84.685121] msm8960_i2s_shutdown Codec Clock 0xc0d90814 ; Rx Bit Clock c0d926c8
 [   84.694765] msm8960_enable_codec_ext_clk: enable = 0
 [   84.728155] msm8960_i2s_startup
 [   84.733160] msm8660_i2s_hw_params Codec Clock 0xc0d90814 ; Rx Bit Clock c0d926c8
 [   84.749732] ACDB=> get_hw_delay Invalid delay/ delay entries
 [   84.754646] ACDB=> get_hw_delay: Path = 0 samplerate = 48000 usec = 3987193140 status -22
 [   84.765481] msm8960_enable_codec_ext_clk: enable = 1
 [   85.223622] wlan0: no IPv6 routers present
 [   95.444376] dhdcdc_set_ioctl: SET PM to 2
 [   99.760903] init: Starting service 'su_daemon'...
 [  101.610712] usb: enable_store enabled=0, !dev->enabled=0
 [  101.610712] usb:: ci13xxx_pullup is_active: 0
 [  101.610743] usb:: hw_device_state dma: 0
 [  101.610743] usb:: hw_device_state hw_read(CAP_USBINTR, ~0): 0
 [  101.610773] usb:: hw_device_state hw_read(CAP_USBCMD, USBCMD_RS): 0
 [  101.610773] usb: usb_remove_config cdev->config=ed093200, config=ed093200
 [  101.611017] mtp_release
 [  101.611536] usb: functions_store buff=mtp,acm,adb
 [  101.611567] usb: android_enable_function name=mtp
 [  101.611567] usb: android_enable_function name=acm
 [  101.611597] usb: android_enable_function name=adb
 [  101.611841] usb: enable_store enabled=1, !dev->enabled=1
 [  101.611872] usb: enable_store f:mtp
 [  101.611872] usb: enable_store f:acm
 [  101.611872] usb: acm is enabled. (bcdDevice=0x400)
 [  101.611902] usb: enable_store f:adb
 [  101.611902] usb: enable_store vendor=4e8,product=6860,bcdDevice=400
 [  101.611933] ,Class=0,SubClass=0,Protocol=0
 [  101.611933] usb: enable_store next cmd : usb_add_config
 [  101.612055] init: Starting service 'adbd'...
 [  101.613398] init: Service 'adbd' is being killed...
 [  101.614069] usb: enable_store enabled=0, !dev->enabled=0
 [  101.623866] adb_open
 [  101.671142] usb: enable_store enabled=0, !dev->enabled=1
 [  101.671142] usb:: ci13xxx_pullup is_active: 0
 [  101.671173] usb:: hw_device_state dma: 0
 [  101.671173] usb:: hw_device_state hw_read(CAP_USBINTR, ~0): 0
 [  101.671204] usb:: hw_device_state hw_read(CAP_USBCMD, USBCMD_RS): 0
 [  101.671692] usb: functions_store buff=mtp,acm,adb
 [  101.671692] usb: android_enable_function name=mtp
 [  101.671722] usb: android_enable_function name=acm
 [  101.671722] usb: android_enable_function name=adb
 [  101.671905] usb: enable_store enabled=1, !dev->enabled=1
 [  101.671936] usb: enable_store f:mtp
 [  101.671936] usb: enable_store f:acm
 [  101.671967] usb: acm is enabled. (bcdDevice=0x400)
 [  101.671967] usb: enable_store f:adb
 [  101.671997] usb: enable_store vendor=4e8,product=6860,bcdDevice=400
 [  101.671997] ,Class=0,SubClass=0,Protocol=0
 [  101.671997] usb: enable_store next cmd : usb_add_config
 [  101.672028] usb: android_bind_enabled_functions f:mtp
 [  101.672028] mtp_bind_config
 [  101.672089] usb: android_bind_enabled_functions f:acm
 [  101.672150] usb: android_bind_enabled_functions f:adb
 [  101.672180] usb:: ci13xxx_pullup is_active: 1
 [  101.672180] usb:: hw_device_state dma: aeee2000
 [  101.672211] usb:: hw_device_state hw_read(CAP_ENDPTLISTADDR, ~0): aeee2000
 [  101.672211] usb:: hw_device_state hw_read(CAP_USBINTR, ~0): 147
 [  101.672241] usb:: hw_device_state hw_read(CAP_USBCMD, USBCMD_RS): 1
 [  101.675232] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received
 [  101.794353] usb:: isr_reset_handler udc: eecee000
 [  101.794384] usb: composite_disconnect
 [  101.794414] usb: android_disconnect cable state (1)
 [  101.794506] usb: android_work config=  (null),connected=0,sw_connected=1
 [  101.794658] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
 [  101.945887] usb: GET_DES
 [  101.947047] usb: android_work config=  (null),connected=1,sw_connected=0
 [  101.947230] android_work: android_work: sent uevent USB_STATE=CONNECTED
 [  101.949519] usb:: isr_reset_handler udc: eecee000
 [  101.949549] usb: composite_disconnect
 [  101.949580] usb: android_disconnect cable state (1)
 [  101.952144] usb: android_work config=  (null),connected=0,sw_connected=1
 [  101.952815] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
 [  102.109873] usb: GET_DES
 [  102.110086] usb: android_work config=  (null),connected=1,sw_connected=0
 [  102.110178] usb: set_config_number single config
 [  102.110209] usb: set_interface_count next_interface_id=4
 [  102.110483] usb: set_config_number single config
 [  102.110514] usb: set_interface_count next_interface_id=4
 [  102.111826] android_usb gadget: high-speed config #1: android_usb
 [  102.111948] usb: SET_CON
 [  102.119456] android_work: android_work: sent uevent USB_STATE=CONNECTED
 [  102.119487] usb: android_work config=ed093200,connected=1,sw_connected=1
 [  102.173905] android_work: android_work: sent uevent USB_STATE=CONFIGURED
 [  102.219838] mtp_open
 [  107.488020] msm8960_i2s_shutdown Codec Clock 0xc0d90814 ; Rx Bit Clock c0d926c8
 [  107.509537] msm8960_enable_codec_ext_clk: enable = 0