Skip to content

Instantly share code, notes, and snippets.

@invisiblek

invisiblek/-

Created October 15, 2014 21:19
Show Gist options
  • Save invisiblek/c76d279d1d1628e5e228 to your computer and use it in GitHub Desktop.
Save invisiblek/c76d279d1d1628e5e228 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
-
diff --git a/arch/arm/mach-msm/lge/board-8974-g3-vzw-gpiomux.c b/arch/arm/mach-msm/lge/board-8974-g3-vzw-gpiomux.c
index 12c3e2e..fe3a327 100644
--- a/arch/arm/mach-msm/lge/board-8974-g3-vzw-gpiomux.c
+++ b/arch/arm/mach-msm/lge/board-8974-g3-vzw-gpiomux.c
@@ -72,49 +72,49 @@ static struct gpiomux_setting ap2mdm_wakeup = {
};
static struct msm_gpiomux_config mdm_configs[] __initdata = {
- /* AP2MDM_STATUS */
+ /* */
{
.gpio = 105,
.settings = {
[GPIOMUX_SUSPENDED] = &ap2mdm_cfg,
}
},
- /* MDM2AP_STATUS */
+ /* */
{
.gpio = 46,
.settings = {
[GPIOMUX_SUSPENDED] = &mdm2ap_status_cfg,
}
},
- /* MDM2AP_ERRFATAL */
+ /* */
{
.gpio = 82,
.settings = {
[GPIOMUX_SUSPENDED] = &mdm2ap_errfatal_cfg,
}
},
- /* AP2MDM_ERRFATAL */
+ /* */
{
.gpio = 106,
.settings = {
[GPIOMUX_SUSPENDED] = &ap2mdm_cfg,
}
},
- /* AP2MDM_SOFT_RESET, aka AP2MDM_PON_RESET_N */
+ /* */
{
.gpio = 24,
.settings = {
[GPIOMUX_SUSPENDED] = &ap2mdm_soft_reset_cfg,
}
},
- /* AP2MDM_WAKEUP */
+ /* */
{
.gpio = 104,
.settings = {
[GPIOMUX_SUSPENDED] = &ap2mdm_wakeup,
}
},
- /* MDM2AP_PBL_READY*/
+ /* */
{
.gpio = 80,
.settings = {
@@ -176,16 +176,16 @@ static struct msm_gpiomux_config msm_eth_configs[] = {
};
#endif
-/* Comment out Temporary, because gpio_suspend_config is not used */
+/* */
#if 0
static struct gpiomux_setting gpio_suspend_config[] = {
{
- .func = GPIOMUX_FUNC_GPIO, /* IN-NP */
+ .func = GPIOMUX_FUNC_GPIO, /* */
.drv = GPIOMUX_DRV_2MA,
.pull = GPIOMUX_PULL_NONE,
},
{
- .func = GPIOMUX_FUNC_GPIO, /* O-LOW */
+ .func = GPIOMUX_FUNC_GPIO, /* */
.drv = GPIOMUX_DRV_2MA,
.pull = GPIOMUX_PULL_NONE,
.dir = GPIOMUX_OUT_LOW,
@@ -246,10 +246,10 @@ static struct gpiomux_setting ath_gpio_suspend_cfg = {
static struct gpiomux_setting gpio_i2c_config = {
.func = GPIOMUX_FUNC_3,
/*
- * Please keep I2C GPIOs drive-strength at minimum (2ma). It is a
- * workaround for HW issue of glitches caused by rapid GPIO current-
- * change.
- */
+
+
+
+ */
.drv = GPIOMUX_DRV_2MA,
.pull = GPIOMUX_PULL_NONE,
};
@@ -319,7 +319,7 @@ static struct gpiomux_setting touch_reset_act_cfg = {
.dir = GPIOMUX_IN,
};
#ifndef CONFIG_LGE_IRRC
-/* NOT USED: GPIO 86 is used as IRRC_RxD in G3 board */
+/* */
static struct gpiomux_setting hap_lvl_shft_suspended_config = {
.func = GPIOMUX_FUNC_GPIO,
.drv = GPIOMUX_DRV_2MA,
@@ -344,14 +344,14 @@ static struct msm_gpiomux_config hap_lvl_shft_config[] __initdata = {
static struct msm_gpiomux_config msm_touch_configs[] __initdata = {
{
- .gpio = 8, /* TOUCH RESET */
+ .gpio = 8, /* */
.settings = {
[GPIOMUX_ACTIVE] = &touch_reset_act_cfg,
[GPIOMUX_SUSPENDED] = &touch_reset_sus_cfg,
},
},
{
- .gpio = 73, /* TOUCH IRQ */
+ .gpio = 73, /* */
.settings = {
[GPIOMUX_ACTIVE] = &touch_int_act_cfg,
[GPIOMUX_SUSPENDED] = &touch_int_sus_cfg,
@@ -394,7 +394,7 @@ static struct gpiomux_setting hsic_resume_susp_cfg = {
static struct msm_gpiomux_config msm_hsic_configs[] = {
{
- .gpio = 144, /*HSIC_STROBE */
+ .gpio = 144, /* */
.settings = {
[GPIOMUX_ACTIVE] = &hsic_act_cfg,
[GPIOMUX_SUSPENDED] = &hsic_sus_cfg,
@@ -402,7 +402,7 @@ static struct msm_gpiomux_config msm_hsic_configs[] = {
},
#ifndef CONFIG_MACH_LGE
{
- .gpio = 145, /* HSIC_DATA */
+ .gpio = 145, /* */
.settings = {
[GPIOMUX_ACTIVE] = &hsic_act_cfg,
[GPIOMUX_SUSPENDED] = &hsic_sus_cfg,
@@ -420,7 +420,7 @@ static struct msm_gpiomux_config msm_hsic_configs[] = {
static struct msm_gpiomux_config msm_hsic_hub_configs[] = {
{
- .gpio = 50, /* HSIC_HUB_INT_N */
+ .gpio = 50, /* */
.settings = {
[GPIOMUX_ACTIVE] = &hsic_hub_act_cfg,
[GPIOMUX_SUSPENDED] = &hsic_sus_cfg,
@@ -428,7 +428,7 @@ static struct msm_gpiomux_config msm_hsic_hub_configs[] = {
},
};
-/* LGE_CHANGE_S [email protected] 130319 GPIO Setting for Hall IC */
+/* */
static struct gpiomux_setting hall_ic_act_cfg = {
.func = GPIOMUX_FUNC_GPIO,
.drv = GPIOMUX_DRV_2MA,
@@ -450,7 +450,7 @@ static struct msm_gpiomux_config msm_hall_ic_configs[] = {
},
},
};
-/* LGE_CHANGE_E [email protected] 130319 GPIO Setting for Hall IC */
+/* */
static struct gpiomux_setting mhl_suspend_config = {
@@ -492,7 +492,7 @@ static struct gpiomux_setting hdmi_active_2_cfg = {
static struct msm_gpiomux_config msm_mhl_configs[] __initdata = {
{
- /* mhl-sii8334 pwr */
+ /* */
.gpio = 12,
.settings = {
[GPIOMUX_SUSPENDED] = &mhl_suspend_config,
@@ -500,7 +500,7 @@ static struct msm_gpiomux_config msm_mhl_configs[] __initdata = {
},
},
{
- /* mhl-sii8334 intr */
+ /* */
.gpio = 82,
.settings = {
[GPIOMUX_SUSPENDED] = &mhl_suspend_config,
@@ -555,28 +555,28 @@ static struct gpiomux_setting gpio_uart7_suspend_cfg = {
static struct msm_gpiomux_config msm_blsp2_uart7_configs[] __initdata = {
{
- .gpio = 41, /* BLSP2 UART7 TX */
+ .gpio = 41, /* */
.settings = {
[GPIOMUX_ACTIVE] = &gpio_uart7_active_cfg,
[GPIOMUX_SUSPENDED] = &gpio_uart7_suspend_cfg,
},
},
{
- .gpio = 42, /* BLSP2 UART7 RX */
+ .gpio = 42, /* */
.settings = {
[GPIOMUX_ACTIVE] = &gpio_uart7_active_cfg,
[GPIOMUX_SUSPENDED] = &gpio_uart7_suspend_cfg,
},
},
{
- .gpio = 43, /* BLSP2 UART7 CTS */
+ .gpio = 43, /* */
.settings = {
[GPIOMUX_ACTIVE] = &gpio_uart7_active_cfg,
[GPIOMUX_SUSPENDED] = &gpio_uart7_suspend_cfg,
},
},
{
- .gpio = 44, /* BLSP2 UART7 RFR */
+ .gpio = 44, /* */
.settings = {
[GPIOMUX_ACTIVE] = &gpio_uart7_active_cfg,
[GPIOMUX_SUSPENDED] = &gpio_uart7_suspend_cfg,
@@ -586,13 +586,13 @@ static struct msm_gpiomux_config msm_blsp2_uart7_configs[] __initdata = {
static struct msm_gpiomux_config msm_rumi_blsp_configs[] __initdata = {
{
- .gpio = 45, /* BLSP2 UART8 TX */
+ .gpio = 45, /* */
.settings = {
[GPIOMUX_SUSPENDED] = &gpio_uart_config,
},
},
{
- .gpio = 46, /* BLSP2 UART8 RX */
+ .gpio = 46, /* */
.settings = {
[GPIOMUX_SUSPENDED] = &gpio_uart_config,
},
@@ -611,19 +611,19 @@ static struct msm_gpiomux_config msm_lcd_configs[] __initdata = {
static struct msm_gpiomux_config msm_epm_configs[] __initdata = {
{
- .gpio = 81, /* EPM enable */
+ .gpio = 81, /* */
.settings = {
[GPIOMUX_SUSPENDED] = &gpio_epm_config,
},
},
{
- .gpio = 85, /* EPM MARKER2 */
+ .gpio = 85, /* */
.settings = {
[GPIOMUX_SUSPENDED] = &gpio_epm_marker_config,
},
},
{
- .gpio = 96, /* EPM MARKER1 */
+ .gpio = 96, /* */
.settings = {
[GPIOMUX_SUSPENDED] = &gpio_epm_marker_config,
},
@@ -633,35 +633,35 @@ static struct msm_gpiomux_config msm_epm_configs[] __initdata = {
static struct msm_gpiomux_config msm_blsp_configs[] __initdata = {
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
{
- .gpio = 0, /* BLSP1 QUP SPI_DATA_MOSI */
+ .gpio = 0, /* */
.settings = {
[GPIOMUX_ACTIVE] = &gpio_spi_config,
[GPIOMUX_SUSPENDED] = &gpio_spi_susp_config,
},
},
{
- .gpio = 1, /* BLSP1 QUP SPI_DATA_MISO */
+ .gpio = 1, /* */
.settings = {
[GPIOMUX_ACTIVE] = &gpio_spi_config,
[GPIOMUX_SUSPENDED] = &gpio_spi_susp_config,
},
},
{
- .gpio = 3, /* BLSP1 QUP SPI_CLK */
+ .gpio = 3, /* */
.settings = {
[GPIOMUX_ACTIVE] = &gpio_spi_config,
[GPIOMUX_SUSPENDED] = &gpio_spi_susp_config,
},
},
{
- .gpio = 9, /* BLSP1 QUP SPI_CS2A_N */
+ .gpio = 9, /* */
.settings = {
[GPIOMUX_ACTIVE] = &gpio_spi_cs2_config,
[GPIOMUX_SUSPENDED] = &gpio_spi_susp_config,
},
},
{
- .gpio = 8, /* BLSP1 QUP SPI_CS1_N */
+ .gpio = 8, /* */
.settings = {
[GPIOMUX_ACTIVE] = &gpio_spi_cs1_config,
[GPIOMUX_SUSPENDED] = &gpio_spi_susp_config,
@@ -669,27 +669,27 @@ static struct msm_gpiomux_config msm_blsp_configs[] __initdata = {
},
#endif
{
- .gpio = 6, /* BLSP1 QUP2 I2C_DAT */
+ .gpio = 6, /* */
.settings = {
[GPIOMUX_SUSPENDED] = &touch_i2c_sus_cfg,
[GPIOMUX_ACTIVE] = &touch_i2c_act_cfg,
},
},
{
- .gpio = 7, /* BLSP1 QUP2 I2C_CLK */
+ .gpio = 7, /* */
.settings = {
[GPIOMUX_SUSPENDED] = &touch_i2c_sus_cfg,
[GPIOMUX_ACTIVE] = &touch_i2c_act_cfg,
},
},
{
- .gpio = 83, /* BLSP11 QUP I2C_DAT */
+ .gpio = 83, /* */
.settings = {
[GPIOMUX_SUSPENDED] = &gpio_i2c_config,
},
},
{
- .gpio = 84, /* BLSP11 QUP I2C_CLK */
+ .gpio = 84, /* */
.settings = {
[GPIOMUX_SUSPENDED] = &gpio_i2c_config,
},
@@ -697,26 +697,26 @@ static struct msm_gpiomux_config msm_blsp_configs[] __initdata = {
#ifdef CONFIG_MACH_LGE
{
- .gpio = 0, /* BLSP2 UART TX */
+ .gpio = 0, /* */
.settings = {
[GPIOMUX_SUSPENDED] = &gpio_uart_config,
},
},
{
- .gpio = 1, /* BLSP2 UART RX */
+ .gpio = 1, /* */
.settings = {
[GPIOMUX_SUSPENDED] = &gpio_uart_config,
},
},
-#else /*QCT Original code */
+#else /* */
{
- .gpio = 4, /* BLSP2 UART TX */
+ .gpio = 4, /* */
.settings = {
[GPIOMUX_SUSPENDED] = &gpio_uart_config,
},
},
{
- .gpio = 5, /* BLSP2 UART RX */
+ .gpio = 5, /* */
.settings = {
[GPIOMUX_SUSPENDED] = &gpio_uart_config,
},
@@ -725,13 +725,13 @@ static struct msm_gpiomux_config msm_blsp_configs[] __initdata = {
#ifdef CONFIG_LGE_IRRC
{
- .gpio = 85, /* BLSP2 UART TX */
+ .gpio = 85, /* */
.settings = {
[GPIOMUX_SUSPENDED] = &gpio_uart_config,
},
},
{
- .gpio = 86, /* BLSP2 UART RX */
+ .gpio = 86, /* */
.settings = {
[GPIOMUX_SUSPENDED] = &gpio_uart_config,
},
@@ -739,14 +739,14 @@ static struct msm_gpiomux_config msm_blsp_configs[] __initdata = {
#endif
#ifndef CONFIG_MACH_LGE
- { /* NFC */
- .gpio = 29, /* BLSP1 QUP6 I2C_DAT */
+ { /* */
+ .gpio = 29, /* */
.settings = {
[GPIOMUX_SUSPENDED] = &gpio_i2c_config,
},
},
- { /* NFC */
- .gpio = 30, /* BLSP1 QUP6 I2C_CLK */
+ { /* */
+ .gpio = 30, /* */
.settings = {
[GPIOMUX_SUSPENDED] = &gpio_i2c_config,
},
@@ -754,28 +754,28 @@ static struct msm_gpiomux_config msm_blsp_configs[] __initdata = {
#endif
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
{
- .gpio = 53, /* BLSP2 QUP4 SPI_DATA_MOSI */
+ .gpio = 53, /* */
.settings = {
[GPIOMUX_ACTIVE] = &gpio_spi_config,
[GPIOMUX_SUSPENDED] = &gpio_suspend_config[1],
},
},
{
- .gpio = 54, /* BLSP2 QUP4 SPI_DATA_MISO */
+ .gpio = 54, /* */
.settings = {
[GPIOMUX_ACTIVE] = &gpio_spi_config,
[GPIOMUX_SUSPENDED] = &gpio_suspend_config[1],
},
},
{
- .gpio = 56, /* BLSP2 QUP4 SPI_CLK */
+ .gpio = 56, /* */
.settings = {
[GPIOMUX_ACTIVE] = &gpio_spi_config,
[GPIOMUX_SUSPENDED] = &gpio_suspend_config[0],
},
},
{
- .gpio = 55, /* BLSP2 QUP4 SPI_CS0_N */
+ .gpio = 55, /* */
.settings = {
[GPIOMUX_ACTIVE] = &gpio_spi_config,
[GPIOMUX_SUSPENDED] = &gpio_suspend_config[0],
@@ -786,13 +786,13 @@ static struct msm_gpiomux_config msm_blsp_configs[] __initdata = {
static struct msm_gpiomux_config msm8974_slimbus_config[] __initdata = {
{
- .gpio = 70, /* slimbus clk */
+ .gpio = 70, /* */
.settings = {
[GPIOMUX_SUSPENDED] = &slimbus,
},
},
{
- .gpio = 71, /* slimbus data */
+ .gpio = 71, /* */
.settings = {
[GPIOMUX_SUSPENDED] = &slimbus,
},
@@ -846,44 +846,44 @@ static struct msm_gpiomux_config msm8974_qua_mi2s_configs[] __initdata = {
static struct gpiomux_setting cam_settings[] = {
{
- .func = GPIOMUX_FUNC_1, /*active 1*/ /* 0 */
+ .func = GPIOMUX_FUNC_1, /* */ /* */
.drv = GPIOMUX_DRV_2MA,
.pull = GPIOMUX_PULL_NONE,
},
{
- .func = GPIOMUX_FUNC_1, /*suspend*/ /* 1 */
+ .func = GPIOMUX_FUNC_1, /* */ /* */
.drv = GPIOMUX_DRV_2MA,
.pull = GPIOMUX_PULL_DOWN,
},
{
- .func = GPIOMUX_FUNC_1, /*i2c suspend*/ /* 2 */
+ .func = GPIOMUX_FUNC_1, /* */ /* */
.drv = GPIOMUX_DRV_2MA,
.pull = GPIOMUX_PULL_KEEPER,
},
{
- .func = GPIOMUX_FUNC_GPIO, /*active 0*/ /* 3 */
+ .func = GPIOMUX_FUNC_GPIO, /* */ /* */
.drv = GPIOMUX_DRV_2MA,
.pull = GPIOMUX_PULL_NONE,
},
{
- .func = GPIOMUX_FUNC_GPIO, /*suspend 0*/ /* 4 */
+ .func = GPIOMUX_FUNC_GPIO, /* */ /* */
.drv = GPIOMUX_DRV_2MA,
.pull = GPIOMUX_PULL_DOWN,
},
{
- .func = GPIOMUX_FUNC_GPIO, /*active 2*/ /* 5 */ // for INPUT pin
+ .func = GPIOMUX_FUNC_GPIO, /* */ /* */ //
.drv = GPIOMUX_DRV_8MA,
.pull = GPIOMUX_PULL_UP,
.dir = GPIOMUX_IN,
},
{
- .func = GPIOMUX_FUNC_GPIO, /*suspend 2*/ /* 6 */ // for INPUT pin
+ .func = GPIOMUX_FUNC_GPIO, /* */ /* */ //
.drv = GPIOMUX_DRV_8MA,
.pull = GPIOMUX_PULL_NONE,
.dir = GPIOMUX_IN,
@@ -936,91 +936,91 @@ static struct msm_gpiomux_config sd_card_det __initdata = {
#if 0
static struct msm_gpiomux_config msm_sensor_configs[] __initdata = {
{
- .gpio = 15, /* CAM_MCLK0 */
+ .gpio = 15, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &cam_settings[1],
},
},
{
- .gpio = 16, /* CAM_MCLK1 */
+ .gpio = 16, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &cam_settings[1],
},
},
{
- .gpio = 17, /* CAM_MCLK2 */
+ .gpio = 17, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &cam_settings[1],
},
},
{
- .gpio = 18, /* WEBCAM1_RESET_N / CAM_MCLK3 */
+ .gpio = 18, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &cam_settings[4],
},
},
{
- .gpio = 19, /* CCI_I2C_SDA0 */
+ .gpio = 19, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &gpio_suspend_config[0],
},
},
{
- .gpio = 20, /* CCI_I2C_SCL0 */
+ .gpio = 20, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &gpio_suspend_config[0],
},
},
{
- .gpio = 21, /* CCI_I2C_SDA1 */
+ .gpio = 21, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &gpio_suspend_config[0],
},
},
{
- .gpio = 22, /* CCI_I2C_SCL1 */
+ .gpio = 22, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &gpio_suspend_config[0],
},
},
{
- .gpio = 23, /* FLASH_LED_EN */
+ .gpio = 23, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &gpio_suspend_config[1],
},
},
{
- .gpio = 24, /* FLASH_LED_NOW */
+ .gpio = 24, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &gpio_suspend_config[1],
},
},
{
- .gpio = 25, /* WEBCAM2_RESET_N */
+ .gpio = 25, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &gpio_suspend_config[1],
},
},
{
- .gpio = 26, /* CAM_IRQ */
+ .gpio = 26, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &cam_settings[1],
},
},
{
- .gpio = 27, /* OIS_SYNC */
+ .gpio = 27, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &gpio_suspend_config[1],
@@ -1028,7 +1028,7 @@ static struct msm_gpiomux_config msm_sensor_configs[] __initdata = {
},
#ifndef CONFIG_MACH_LGE
{
- .gpio = 28, /* WEBCAM1_STANDBY */
+ .gpio = 28, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &gpio_suspend_config[1],
@@ -1036,128 +1036,128 @@ static struct msm_gpiomux_config msm_sensor_configs[] __initdata = {
},
#endif
{
- .gpio = 89, /* CAM1_STANDBY_N */
+ .gpio = 89, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &gpio_suspend_config[1],
},
},
{
- .gpio = 90, /* CAM1_RST_N */
+ .gpio = 90, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &gpio_suspend_config[1],
},
},
{
- .gpio = 91, /* CAM2_STANDBY_N */
+ .gpio = 91, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &gpio_suspend_config[1],
},
},
-/* LGE change_start,[nfc][[email protected]] B2 Bringup */
+/* */
#if defined(CONFIG_LGE_NFC) || defined(CONFIG_NFC_BCM2079X) || defined(CONFIG_LGE_NFC_PN547_C2)
#else
{
- .gpio = 92, /* CAM2_RST_N */
+ .gpio = 92, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &gpio_suspend_config[1],
},
},
#endif
-/* LGE change_end,[nfc][[email protected]] B2 Bringup */
+/* */
};
static struct msm_gpiomux_config msm_sensor_configs_dragonboard[] __initdata = {
{
- .gpio = 15, /* CAM_MCLK0 */
+ .gpio = 15, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &cam_settings[1],
},
},
{
- .gpio = 16, /* CAM_MCLK1 */
+ .gpio = 16, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &cam_settings[1],
},
},
{
- .gpio = 17, /* CAM_MCLK2 */
+ .gpio = 17, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &cam_settings[1],
},
},
{
- .gpio = 18, /* WEBCAM1_RESET_N / CAM_MCLK3 */
+ .gpio = 18, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &cam_settings[4],
},
},
{
- .gpio = 19, /* CCI_I2C_SDA0 */
+ .gpio = 19, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &gpio_suspend_config[0],
},
},
{
- .gpio = 20, /* CCI_I2C_SCL0 */
+ .gpio = 20, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &gpio_suspend_config[0],
},
},
{
- .gpio = 21, /* CCI_I2C_SDA1 */
+ .gpio = 21, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &gpio_suspend_config[0],
},
},
{
- .gpio = 22, /* CCI_I2C_SCL1 */
+ .gpio = 22, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &gpio_suspend_config[0],
},
},
{
- .gpio = 23, /* FLASH_LED_EN */
+ .gpio = 23, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &gpio_suspend_config[1],
},
},
{
- .gpio = 24, /* FLASH_LED_NOW */
+ .gpio = 24, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &gpio_suspend_config[1],
},
},
{
- .gpio = 25, /* WEBCAM2_RESET_N */
+ .gpio = 25, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &gpio_suspend_config[1],
},
},
{
- .gpio = 26, /* CAM_IRQ */
+ .gpio = 26, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &cam_settings[1],
},
},
{
- .gpio = 27, /* OIS_SYNC */
+ .gpio = 27, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &gpio_suspend_config[1],
@@ -1165,7 +1165,7 @@ static struct msm_gpiomux_config msm_sensor_configs_dragonboard[] __initdata = {
},
#ifndef CONFIG_MACH_LGE
{
- .gpio = 28, /* WEBCAM1_STANDBY */
+ .gpio = 28, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &gpio_suspend_config[1],
@@ -1173,237 +1173,237 @@ static struct msm_gpiomux_config msm_sensor_configs_dragonboard[] __initdata = {
},
#endif
{
- .gpio = 89, /* CAM1_STANDBY_N */
+ .gpio = 89, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &gpio_suspend_config[1],
},
},
{
- .gpio = 90, /* CAM1_RST_N */
+ .gpio = 90, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &gpio_suspend_config[1],
},
},
{
- .gpio = 91, /* CAM2_STANDBY_N */
+ .gpio = 91, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &gpio_suspend_config[1],
},
},
-/* LGE change_start,[nfc][[email protected]] B2 Bringup */
+/* */
#if defined(CONFIG_LGE_NFC) || defined(CONFIG_NFC_BCM2079X) || defined(CONFIG_LGE_NFC_PN547_C2)
#else
{
- .gpio = 94, /* CAM2_RST_N */
+ .gpio = 94, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &gpio_suspend_config[1],
},
},
#endif
-/* LGE change_end,[nfc][[email protected]] B2 Bringup */
+/* */
};
#endif
-/* EVB */
+/* */
static struct msm_gpiomux_config msm_sensor_configs_evb[] __initdata = {
{
- .gpio = 15, /* CAM_MCLK0 */
+ .gpio = 15, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &cam_settings[1],
},
},
{
- .gpio = 16, /* 13M_VANA / CAM_MCLK1 */
+ .gpio = 16, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &cam_settings[4],
},
},
{
- .gpio = 17, /* CAM_MCLK2 */
+ .gpio = 17, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &cam_settings[1],
},
},
{
- .gpio = 18, /* CAM2_RST_N / CAM_MCLK3 */
+ .gpio = 18, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &cam_settings[4],
},
},
{
- .gpio = 19, /* CCI_I2C_SDA0 */
+ .gpio = 19, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &cam_settings[2],
},
},
{
- .gpio = 20, /* CCI_I2C_SCL0 */
+ .gpio = 20, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &cam_settings[2],
},
},
{
- .gpio = 21, /* CCI_I2C_SDA1 */
+ .gpio = 21, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &cam_settings[2],
},
},
{
- .gpio = 22, /* CCI_I2C_SCL1 */
+ .gpio = 22, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &cam_settings[2],
},
},
{
- .gpio = 29, /* OIS_RESET */
+ .gpio = 29, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &cam_settings[4],
},
},
{
- .gpio = 30, /* AF_MVDD */
+ .gpio = 30, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &cam_settings[4],
},
},
{
- .gpio = 43, /* FLASH_LED_STROBE */
+ .gpio = 43, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &cam_settings[4],
},
},
{
- .gpio = 49, /* CAM1_RST_N */
+ .gpio = 49, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &cam_settings[4],
},
},
{
- .gpio = 57, /* 13M_VCM_EN */
+ .gpio = 57, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &cam_settings[4],
},
},
{
- .gpio = 145, /* OIS_LDO_EN */
+ .gpio = 145, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &cam_settings[4],
},
},
{
- .gpio = 96, /* 13M_VIO */
+ .gpio = 96, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &cam_settings[4],
},
},
};
-/* REV A*/
+/* */
static struct msm_gpiomux_config msm_sensor_configs_rev_a[] __initdata = {
{
- .gpio = 4, /* CAM1_RST_N */
+ .gpio = 4, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &cam_settings[4],
},
},
{
- .gpio = 15, /* CAM_MCLK0 */
+ .gpio = 15, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &cam_settings[1],
},
},
{
- .gpio = 16, /* 13M_VANA / CAM_MCLK1 */
+ .gpio = 16, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &cam_settings[4],
},
},
{
- .gpio = 17, /* CAM_MCLK2 */
+ .gpio = 17, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &cam_settings[1],
},
},
{
- .gpio = 18, /* CAM2_RST_N / CAM_MCLK3 */
+ .gpio = 18, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &cam_settings[4],
},
},
{
- .gpio = 19, /* CCI_I2C_SDA0 */
+ .gpio = 19, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &cam_settings[2],
},
},
{
- .gpio = 20, /* CCI_I2C_SCL0 */
+ .gpio = 20, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &cam_settings[2],
},
},
{
- .gpio = 21, /* CCI_I2C_SDA1 */
+ .gpio = 21, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &cam_settings[2],
},
},
{
- .gpio = 22, /* CCI_I2C_SCL1 */
+ .gpio = 22, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &cam_settings[2],
},
},
{
- .gpio = 29, /* OIS_RESET */
+ .gpio = 29, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &cam_settings[4],
},
},
{
- .gpio = 30, /* AF_MVDD */
+ .gpio = 30, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &cam_settings[4],
},
},
{
- .gpio = 43, /* FLASH_LED_STROBE */
+ .gpio = 43, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &cam_settings[4],
},
},
-#if 0 // from REV A , pm_gpio_4
+#if 0 //
{
- .gpio = 57, /* 13M_VCM_EN */
+ .gpio = 57, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &cam_settings[4],
@@ -1411,14 +1411,14 @@ static struct msm_gpiomux_config msm_sensor_configs_rev_a[] __initdata = {
},
#endif
{
- .gpio = 96, /* 13M_VIO */
+ .gpio = 96, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &cam_settings[4],
},
},
{
- .gpio = 145, /* OIS_LDO_EN */
+ .gpio = 145, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &cam_settings[4],
@@ -1426,108 +1426,108 @@ static struct msm_gpiomux_config msm_sensor_configs_rev_a[] __initdata = {
},
};
-/* REV B*/
+/* */
static struct msm_gpiomux_config msm_sensor_configs_rev_b[] __initdata = {
{
- .gpio = 4, /* CAM1_RST_N */
+ .gpio = 4, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &cam_settings[4],
},
},
{
- .gpio = 15, /* CAM_MCLK0 */
+ .gpio = 15, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &cam_settings[1],
},
},
{
- .gpio = 16, /* 13M_VANA / CAM_MCLK1 */
+ .gpio = 16, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &cam_settings[4],
},
},
{
- .gpio = 17, /* CAM_MCLK2 */
+ .gpio = 17, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &cam_settings[1],
},
},
{
- .gpio = 18, /* CAM2_RST_N / CAM_MCLK3 */
+ .gpio = 18, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &cam_settings[4],
},
},
{
- .gpio = 19, /* CCI_I2C_SDA0 */
+ .gpio = 19, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &cam_settings[2],
},
},
{
- .gpio = 20, /* CCI_I2C_SCL0 */
+ .gpio = 20, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &cam_settings[2],
},
},
{
- .gpio = 21, /* CCI_I2C_SDA1 */
+ .gpio = 21, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &cam_settings[2],
},
},
{
- .gpio = 22, /* CCI_I2C_SCL1 */
+ .gpio = 22, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[0],
[GPIOMUX_SUSPENDED] = &cam_settings[2],
},
},
{
- .gpio = 29, /* OIS_RESET */
+ .gpio = 29, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &cam_settings[4],
},
},
{
- .gpio = 30, /* OIS_ANA/OIS_DIG */
+ .gpio = 30, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &cam_settings[4],
},
},
{
- .gpio = 89, /* VT_CAM_EN */
+ .gpio = 89, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &cam_settings[4],
},
},
{
- .gpio = 96, /* 13M_VIO */
+ .gpio = 96, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &cam_settings[4],
},
},
{
- .gpio = 145, /* VCM_LDO_EN */
+ .gpio = 145, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[3],
[GPIOMUX_SUSPENDED] = &cam_settings[4],
},
},
{
- .gpio = 61, /* LDAF_INT */
+ .gpio = 61, /* */
.settings = {
[GPIOMUX_ACTIVE] = &cam_settings[5],
[GPIOMUX_SUSPENDED] = &cam_settings[6],
@@ -1535,7 +1535,7 @@ static struct msm_gpiomux_config msm_sensor_configs_rev_b[] __initdata = {
},
};
-#endif /* #if defined(CONFIG_MACH_LGE) */
+#endif /* */
static struct gpiomux_setting auxpcm_act_cfg = {
.func = GPIOMUX_FUNC_1,
.drv = GPIOMUX_DRV_8MA,
@@ -1566,7 +1566,7 @@ static struct msm_gpiomux_config tpa2015d_extamp_configs[] = {
},
};
#endif
-/* Primary AUXPCM port sharing GPIO lines with Primary MI2S */
+/* */
#ifndef CONFIG_MACH_LGE
static struct msm_gpiomux_config msm8974_pri_pri_auxpcm_configs[] __initdata = {
{
@@ -1600,7 +1600,7 @@ static struct msm_gpiomux_config msm8974_pri_pri_auxpcm_configs[] __initdata = {
};
#endif
-/* Primary AUXPCM port sharing GPIO lines with Tertiary MI2S */
+/* */
static struct msm_gpiomux_config msm8974_pri_ter_auxpcm_configs[] __initdata = {
{
.gpio = 74,
@@ -1758,13 +1758,13 @@ static struct msm_gpiomux_config ath_gpio_configs[] = {
static struct msm_gpiomux_config msm_taiko_config[] __initdata = {
{
- .gpio = 63, /* SYS_RST_N */
+ .gpio = 63, /* */
.settings = {
[GPIOMUX_SUSPENDED] = &taiko_reset,
},
},
{
- .gpio = 72, /* CDC_INT */
+ .gpio = 72, /* */
.settings = {
[GPIOMUX_SUSPENDED] = &taiko_int,
},
@@ -1781,7 +1781,7 @@ static struct gpiomux_setting slimport_int_sus_cfg = {
static struct msm_gpiomux_config slimport_configs[] __initdata = {
{
- .gpio = 28, /* SLIMPORT IRQ */
+ .gpio = 28, /* */
.settings = {
[GPIOMUX_SUSPENDED] = &slimport_int_sus_cfg,
},
@@ -1901,7 +1901,7 @@ static struct gpiomux_setting sdc3_data_1_suspend_cfg = {
static struct msm_gpiomux_config msm8974_sdc3_configs[] __initdata = {
{
- /* DAT3 */
+ /* */
.gpio = 35,
.settings = {
[GPIOMUX_ACTIVE] = &sdc3_cmd_data_0_3_actv_cfg,
@@ -1909,7 +1909,7 @@ static struct msm_gpiomux_config msm8974_sdc3_configs[] __initdata = {
},
},
{
- /* DAT2 */
+ /* */
.gpio = 36,
.settings = {
[GPIOMUX_ACTIVE] = &sdc3_cmd_data_0_3_actv_cfg,
@@ -1917,7 +1917,7 @@ static struct msm_gpiomux_config msm8974_sdc3_configs[] __initdata = {
},
},
{
- /* DAT1 */
+ /* */
.gpio = 37,
.settings = {
[GPIOMUX_ACTIVE] = &sdc3_cmd_data_0_3_actv_cfg,
@@ -1925,7 +1925,7 @@ static struct msm_gpiomux_config msm8974_sdc3_configs[] __initdata = {
},
},
{
- /* DAT0 */
+ /* */
.gpio = 38,
.settings = {
[GPIOMUX_ACTIVE] = &sdc3_cmd_data_0_3_actv_cfg,
@@ -1933,7 +1933,7 @@ static struct msm_gpiomux_config msm8974_sdc3_configs[] __initdata = {
},
},
{
- /* CMD */
+ /* */
.gpio = 39,
.settings = {
[GPIOMUX_ACTIVE] = &sdc3_cmd_data_0_3_actv_cfg,
@@ -1941,7 +1941,7 @@ static struct msm_gpiomux_config msm8974_sdc3_configs[] __initdata = {
},
},
{
- /* CLK */
+ /* */
.gpio = 40,
.settings = {
[GPIOMUX_ACTIVE] = &sdc3_clk_actv_cfg,
@@ -1983,10 +1983,10 @@ static struct gpiomux_setting sdc4_data_1_suspend_cfg = {
static struct msm_gpiomux_config msm8974_sdc4_configs[] __initdata = {
{
-/* LGE change_start,[nfc][[email protected]] B2 Bringup */
+/* */
#if defined(CONFIG_LGE_NFC) || defined(CONFIG_NFC_BCM2079X) || defined(CONFIG_LGE_NFC_PN547_C2)
#else
- /* DAT3 */
+ /* */
.gpio = 92,
.settings = {
[GPIOMUX_ACTIVE] = &sdc4_cmd_data_0_3_actv_cfg,
@@ -1994,7 +1994,7 @@ static struct msm_gpiomux_config msm8974_sdc4_configs[] __initdata = {
},
},
{
- /* DAT2 */
+ /* */
.gpio = 94,
.settings = {
[GPIOMUX_ACTIVE] = &sdc4_cmd_data_0_3_actv_cfg,
@@ -2002,9 +2002,9 @@ static struct msm_gpiomux_config msm8974_sdc4_configs[] __initdata = {
},
},
#endif
-/* LGE change_end,[nfc][[email protected]] B2 Bringup */
+/* */
{
- /* DAT1 */
+ /* */
.gpio = 95,
.settings = {
[GPIOMUX_ACTIVE] = &sdc4_cmd_data_0_3_actv_cfg,
@@ -2012,7 +2012,7 @@ static struct msm_gpiomux_config msm8974_sdc4_configs[] __initdata = {
},
},
{
- /* DAT0 */
+ /* */
.gpio = 96,
.settings = {
[GPIOMUX_ACTIVE] = &sdc4_cmd_data_0_3_actv_cfg,
@@ -2020,7 +2020,7 @@ static struct msm_gpiomux_config msm8974_sdc4_configs[] __initdata = {
},
},
{
- /* CMD */
+ /* */
.gpio = 91,
.settings = {
[GPIOMUX_ACTIVE] = &sdc4_cmd_data_0_3_actv_cfg,
@@ -2028,7 +2028,7 @@ static struct msm_gpiomux_config msm8974_sdc4_configs[] __initdata = {
},
},
{
- /* CLK */
+ /* */
.gpio = 93,
.settings = {
[GPIOMUX_ACTIVE] = &sdc4_clk_actv_cfg,
@@ -2044,38 +2044,38 @@ static void msm_gpiomux_sdc4_install(void)
}
#else
static void msm_gpiomux_sdc4_install(void) {}
-#endif /* CONFIG_MMC_MSM_SDC4_SUPPORT */
+#endif /* */
-/* LGE_CHANGE_S, [BT][[email protected]], 2013-01-29 */
+/* */
#ifdef CONFIG_LGE_BLUETOOTH
static struct gpiomux_setting bt_blsp5_uart_tx_config = {
.func = GPIOMUX_FUNC_3,
.drv = GPIOMUX_DRV_8MA,
- .pull = GPIOMUX_PULL_NONE, /* Should be PULL NONE */
+ .pull = GPIOMUX_PULL_NONE, /* */
};
static struct gpiomux_setting bt_blsp5_uart_rx_config = {
.func = GPIOMUX_FUNC_3,
.drv = GPIOMUX_DRV_8MA,
- .pull = GPIOMUX_PULL_NONE, /* Should be PULL NONE */
+ .pull = GPIOMUX_PULL_NONE, /* */
};
static struct gpiomux_setting bt_blsp5_uart_cts_config = {
.func = GPIOMUX_FUNC_3,
.drv = GPIOMUX_DRV_8MA,
- .pull = GPIOMUX_PULL_NONE, /* Should be PULL NONE */
+ .pull = GPIOMUX_PULL_NONE, /* */
};
static struct gpiomux_setting bt_blsp5_uart_rfr_config = {
.func = GPIOMUX_FUNC_4,
.drv = GPIOMUX_DRV_8MA,
- .pull = GPIOMUX_PULL_NONE, /* Should be PULL NONE */
+ .pull = GPIOMUX_PULL_NONE, /* */
};
static struct gpiomux_setting bt_gpio_uart_suspend_config = {
.func = GPIOMUX_FUNC_GPIO,
.drv = GPIOMUX_DRV_2MA,
- .pull = GPIOMUX_PULL_NONE, /* PULL Configuration */
+ .pull = GPIOMUX_PULL_NONE, /* */
};
static struct gpiomux_setting bt_rfkill_active_config = {
@@ -2130,28 +2130,28 @@ static struct gpiomux_setting bt_pcm_suspend_config = {
static struct msm_gpiomux_config bt_msm_blsp_configs[] __initdata = {
{
- .gpio = 23, /* BLSP1 UART5 TX */
+ .gpio = 23, /* */
.settings = {
[GPIOMUX_ACTIVE] = &bt_blsp5_uart_tx_config ,
[GPIOMUX_SUSPENDED] = &bt_gpio_uart_suspend_config ,
},
},
{
- .gpio = 24, /* BLSP1 UART5 RX */
+ .gpio = 24, /* */
.settings = {
[GPIOMUX_ACTIVE] = &bt_blsp5_uart_rx_config ,
[GPIOMUX_SUSPENDED] = &bt_gpio_uart_suspend_config ,
},
},
{
- .gpio = 25, /* BLSP1 UART5 CTS */
+ .gpio = 25, /* */
.settings = {
[GPIOMUX_ACTIVE] = &bt_blsp5_uart_cts_config ,
[GPIOMUX_SUSPENDED] = &bt_gpio_uart_suspend_config ,
},
},
{
- .gpio = 26, /* BLSP1 UART5 RFR */
+ .gpio = 26, /* */
.settings = {
[GPIOMUX_ACTIVE] = &bt_blsp5_uart_rfr_config ,
[GPIOMUX_SUSPENDED] = &bt_gpio_uart_suspend_config ,
@@ -2161,7 +2161,7 @@ static struct msm_gpiomux_config bt_msm_blsp_configs[] __initdata = {
static struct msm_gpiomux_config bt_rfkill_configs[] = {
{
- .gpio = 41, /* BT_RESET_N */
+ .gpio = 41, /* */
.settings = {
[GPIOMUX_ACTIVE] = &bt_rfkill_active_config,
[GPIOMUX_SUSPENDED] = &bt_rfkill_suspend_config,
@@ -2191,28 +2191,28 @@ static struct msm_gpiomux_config bt_wakeup_configs[] __initdata = {
static struct msm_gpiomux_config bt_pcm_configs[] __initdata = {
{
- .gpio = 79, /* BT_PCM_CLK */
+ .gpio = 79, /* */
.settings = {
[GPIOMUX_ACTIVE] = &bt_pcm_active_config,
[GPIOMUX_SUSPENDED] = &bt_pcm_suspend_config,
},
},
{
- .gpio = 80, /* BT_PCM_SYNC */
+ .gpio = 80, /* */
.settings = {
[GPIOMUX_ACTIVE] = &bt_pcm_active_config,
[GPIOMUX_SUSPENDED] = &bt_pcm_suspend_config,
},
},
{
- .gpio = 81, /* BT_PCM_DIN */
+ .gpio = 81, /* */
.settings = {
[GPIOMUX_ACTIVE] = &bt_pcm_active_config,
[GPIOMUX_SUSPENDED] = &bt_pcm_suspend_config,
},
},
{
- .gpio = 82, /* BT_PCM_DOUT */
+ .gpio = 82, /* */
.settings = {
[GPIOMUX_ACTIVE] = &bt_pcm_active_config,
[GPIOMUX_SUSPENDED] = &bt_pcm_suspend_config,
@@ -2222,32 +2222,32 @@ static struct msm_gpiomux_config bt_pcm_configs[] __initdata = {
static void bluetooth_msm_gpiomux_install(void)
{
- /* UART */
+ /* */
msm_gpiomux_install(bt_msm_blsp_configs, ARRAY_SIZE(bt_msm_blsp_configs));
- /* RFKILL */
+ /* */
msm_gpiomux_install(bt_rfkill_configs, ARRAY_SIZE(bt_rfkill_configs));
- /* HOST WAKE-UP */
+ /* */
msm_gpiomux_install(bt_host_wakeup_configs, ARRAY_SIZE(bt_host_wakeup_configs));
- /* BT WAKE-UP */
+ /* */
msm_gpiomux_install(bt_wakeup_configs, ARRAY_SIZE(bt_wakeup_configs));
- /* PCM I/F */
+ /* */
msm_gpiomux_install(bt_pcm_configs, ARRAY_SIZE(bt_pcm_configs));
}
-#endif /* CONFIG_LGE_BLUETOOTH */
-/* LGE_CHANGE_E, [BT][[email protected]], 2013-01-29 */
+#endif /* */
+/* */
static struct gpiomux_setting max17048_i2c_sda_config = {
- /* GPIO_2 */
+ /* */
.func = GPIOMUX_FUNC_3,
.drv = GPIOMUX_DRV_8MA,
.pull = GPIOMUX_PULL_NONE,
};
static struct gpiomux_setting max17048_i2c_scl_config = {
- /* GPIO_3 */
+ /* */
.func = GPIOMUX_FUNC_3,
.drv = GPIOMUX_DRV_8MA,
.pull = GPIOMUX_PULL_NONE,
@@ -2259,21 +2259,21 @@ static struct gpiomux_setting max17048_int_config = {
};
static struct msm_gpiomux_config msm_fuel_gauge_configs[] __initdata = {
{
- .gpio = 2, /* BLSP1 QUP1 I2C_DAT */
+ .gpio = 2, /* */
.settings = {
[GPIOMUX_ACTIVE] = &max17048_i2c_sda_config,
[GPIOMUX_SUSPENDED] = &max17048_i2c_sda_config,
},
},
{
- .gpio = 3, /* BLSP1 QUP1 I2C_CLK */
+ .gpio = 3, /* */
.settings = {
[GPIOMUX_ACTIVE] = &max17048_i2c_scl_config,
[GPIOMUX_SUSPENDED] = &max17048_i2c_scl_config,
},
},
{
- .gpio = 9, /* FUEL_GAUGE_INT_N */
+ .gpio = 9, /* */
.settings = {
[GPIOMUX_ACTIVE] = &max17048_int_config,
[GPIOMUX_SUSPENDED] = &max17048_int_config,
@@ -2281,19 +2281,19 @@ static struct msm_gpiomux_config msm_fuel_gauge_configs[] __initdata = {
},
};
-#ifdef CONFIG_MACH_LGE /*temporary code for bringup */
+#ifdef CONFIG_MACH_LGE /* */
-#else /*QCT Original code */
+#else /* */
static struct msm_gpiomux_config apq8074_dragonboard_ts_config[] __initdata = {
{
- /* BLSP1 QUP I2C_DATA */
+ /* */
.gpio = 2,
.settings = {
[GPIOMUX_SUSPENDED] = &gpio_i2c_config,
},
},
{
- /* BLSP1 QUP I2C_CLK */
+ /* */
.gpio = 3,
.settings = {
[GPIOMUX_SUSPENDED] = &gpio_i2c_config,
@@ -2303,7 +2303,7 @@ static struct msm_gpiomux_config apq8074_dragonboard_ts_config[] __initdata = {
#endif
-/* LGE change_start,[nfc][[email protected]] B2 Bringup */
+/* */
#if defined(CONFIG_LGE_NFC) || defined(CONFIG_NFC_BCM2079X) || defined(CONFIG_LGE_NFC_PN547_C2)
static struct gpiomux_setting nfc_sda_cfg = {
.func = GPIOMUX_FUNC_3,
@@ -2331,7 +2331,7 @@ static struct gpiomux_setting nfc_irq_cfg = {
.dir = GPIOMUX_IN,
};
-static struct gpiomux_setting nfc_mode_cfg = { /* WAKE */
+static struct gpiomux_setting nfc_mode_cfg = { /* */
.func = GPIOMUX_FUNC_GPIO,
.drv = GPIOMUX_DRV_8MA,
.pull = GPIOMUX_PULL_NONE,
@@ -2339,7 +2339,7 @@ static struct gpiomux_setting nfc_mode_cfg = { /* WAKE */
};
static struct msm_gpiomux_config msm8974_nfc_configs[] __initdata = {
{
- /* I2C SDA */
+ /* */
.gpio = 83,
.settings = {
[GPIOMUX_ACTIVE] = &nfc_sda_cfg,
@@ -2347,7 +2347,7 @@ static struct msm_gpiomux_config msm8974_nfc_configs[] __initdata = {
},
},
{
- /* I2C SCL */
+ /* */
.gpio = 84,
.settings = {
[GPIOMUX_ACTIVE] = &nfc_scl_cfg,
@@ -2355,7 +2355,7 @@ static struct msm_gpiomux_config msm8974_nfc_configs[] __initdata = {
},
},
{
- /* VEN */
+ /* */
.gpio = 94,
.settings = {
[GPIOMUX_ACTIVE] = &nfc_ven_cfg,
@@ -2363,7 +2363,7 @@ static struct msm_gpiomux_config msm8974_nfc_configs[] __initdata = {
},
},
{
- /* IRQ */
+ /* */
.gpio = 5,
.settings = {
[GPIOMUX_ACTIVE] = &nfc_irq_cfg,
@@ -2371,7 +2371,7 @@ static struct msm_gpiomux_config msm8974_nfc_configs[] __initdata = {
},
},
{
- /* MODE *//* WAKE */
+ /* *//* */
.gpio = 92,
.settings = {
[GPIOMUX_ACTIVE] = &nfc_mode_cfg,
@@ -2380,7 +2380,7 @@ static struct msm_gpiomux_config msm8974_nfc_configs[] __initdata = {
},
};
#endif
-/* LGE change_end,[nfc][[email protected]] B2 Bringup */
+/* */
void __init msm_8974_init_gpiomux(void)
@@ -2435,7 +2435,7 @@ void __init msm_8974_init_gpiomux(void)
msm_gpiomux_install(msm_sensor_configs_rev_b, ARRAY_SIZE(msm_sensor_configs_rev_b));
break;
}
-#else /* QCT Original */
+#else /* */
if (of_board_is_dragonboard() && machine_is_apq8074())
msm_gpiomux_install(msm_sensor_configs_dragonboard, \
ARRAY_SIZE(msm_sensor_configs_dragonboard));
@@ -2506,12 +2506,12 @@ void __init msm_8974_init_gpiomux(void)
ARRAY_SIZE(slimport_configs));
#endif
-/* LGE_CHANGE_S [email protected] 130319 GPIO Setting for Hall IC */
+/* */
msm_gpiomux_install(msm_hall_ic_configs, ARRAY_SIZE(msm_hall_ic_configs));
-/* LGE_CHANGE_E [email protected] 130319 GPIO Setting for Hall IC */
+/* */
-#ifndef CONFIG_MACH_LGE /*QCT Original code */
+#ifndef CONFIG_MACH_LGE /* */
if (of_board_is_dragonboard() && machine_is_apq8074())
msm_gpiomux_install(apq8074_dragonboard_ts_config,
ARRAY_SIZE(apq8074_dragonboard_ts_config));
@@ -2520,18 +2520,18 @@ void __init msm_8974_init_gpiomux(void)
ARRAY_SIZE(msm_fuel_gauge_configs));
#endif
-/* LGE change_start,[nfc][[email protected]] B2 Bringup */
+/* */
#if defined(CONFIG_LGE_NFC) || defined(CONFIG_NFC_BCM2079X) || defined(CONFIG_LGE_NFC_PN547_C2)
msm_gpiomux_install(msm8974_nfc_configs, ARRAY_SIZE(msm8974_nfc_configs));
#endif
-/* LGE change_end,[nfc][[email protected]] B2 Bringup */
+/* */
-/* LGE_CHANGE_S, [BT][[email protected]], 2013-01-29 */
+/* */
#ifdef CONFIG_LGE_BLUETOOTH
bluetooth_msm_gpiomux_install();
-#endif /* CONFIG_LGE_BLUETOOTH */
-/* LGE_CHANGE_E, [BT][[email protected]], 2013-01-29 */
+#endif /* */
+/* */
#if defined(CONFIG_SWITCH_MAX1462X)
msm_gpiomux_install(headset_configs, ARRAY_SIZE(headset_configs));
@@ -2539,7 +2539,7 @@ void __init msm_8974_init_gpiomux(void)
#ifdef CONFIG_SND_SOC_CS35L32
if (lge_get_board_revno() >= HW_REV_A)
msm_gpiomux_install(msm8974_qua_mi2s_configs, ARRAY_SIZE(msm8974_qua_mi2s_configs));
-#endif /*CONFIG_SND_SOC_CS35L32*/
+#endif /* */
#ifdef CONFIG_SND_SOC_TPA2015D
msm_gpiomux_install(tpa2015d_extamp_configs, ARRAY_SIZE(tpa2015d_extamp_configs));
#endif
@@ -2547,11 +2547,11 @@ void __init msm_8974_init_gpiomux(void)
static void wcnss_switch_to_gpio(void)
{
- /* Switch MUX to GPIO */
+ /* */
msm_gpiomux_install(wcnss_5gpio_interface,
ARRAY_SIZE(wcnss_5gpio_interface));
- /* Ensure GPIO config */
+ /* */
gpio_direction_input(WLAN_DATA2);
gpio_direction_input(WLAN_DATA1);
gpio_direction_input(WLAN_DATA0);
@@ -2574,11 +2574,11 @@ u32 wcnss_rf_read_reg(u32 rf_reg_addr)
wcnss_switch_to_gpio();
- /* Reset the signal if it is already being used. */
+ /* */
gpio_set_value(WLAN_SET, 0);
gpio_set_value(WLAN_CLK, 0);
- /* We start with cmd_set high WLAN_SET = 1. */
+ /* */
gpio_set_value(WLAN_SET, 1);
gpio_direction_output(WLAN_DATA0, 1);
@@ -2589,9 +2589,9 @@ u32 wcnss_rf_read_reg(u32 rf_reg_addr)
gpio_set_value(WLAN_DATA1, 0);
gpio_set_value(WLAN_DATA2, 0);
- /* Prepare command and RF register address that need to sent out.
- * Make sure that we send only 14 bits from LSB.
- */
+ /*
+
+ */
rf_cmd_and_addr = (((WLAN_RF_READ_REG_CMD) |
(rf_reg_addr << WLAN_RF_REG_ADDR_START_OFFSET)) &
WLAN_RF_READ_CMD_MASK);
@@ -2611,14 +2611,14 @@ u32 wcnss_rf_read_reg(u32 rf_reg_addr)
gpio_set_value(WLAN_DATA2, rf_bit ? 1 : 0);
rf_cmd_and_addr = (rf_cmd_and_addr >> 1);
- /* Send the data out WLAN_CLK = 1 */
+ /* */
gpio_set_value(WLAN_CLK, 1);
}
- /* Pull down the clock signal */
+ /* */
gpio_set_value(WLAN_CLK, 0);
- /* Configure data pins to input IO pins */
+ /* */
gpio_direction_input(WLAN_DATA0);
gpio_direction_input(WLAN_DATA1);
gpio_direction_input(WLAN_DATA2);
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment