ipedrazas/gist:2c93f6e74737d1f8a791

zeroows · 2017-10-29T14:13:33Z

To Show all ips and name in the new docker

docker ps -q | xargs -n 1 docker inspect --format '{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}} {{ .Name }}' | sed 's/ \// /'

GammaGames · 2018-10-19T15:52:53Z

I wanted to get the container's port as well, so I added the following to my .bashrc:

function dip() {
        if [ -z $1 ]; then
                docker ps -a --format "{{.ID}}" | while read -r line ; do
                        echo $line $(docker inspect --format "{{ .Name }} {{ .NetworkSettings.Networks.bridge.IPAddress }}" $line | sed 's/\///'):$(docker port "$line" | grep -o "0.0.0.0:.*" | cut -f2 -d:)
                done
        else
                echo $(docker inspect --format "{{.ID }} {{ .Name }} {{ .NetworkSettings.Networks.bridge.IPAddress }}" $1 | sed 's/\///'):$(docker port "$1" | grep -o "0.0.0.0:.*" | cut -f2 -d:)
        fi
}

Running dip in the command line prints out all container's ID, name, IP, and port, and running dip [id] prints out just that container's ID, name, IP, and port.

AntonioCS · 2020-01-31T17:00:43Z

This is what worked for me:

docker ps -q | xargs -n 1 docker inspect --format '{{ .Name }} {{range .NetworkSettings.Networks}} {{.IPAddress}}{{end}}' | sed 's#^/##';

Got it here: https://bytefreaks.net/applications/docker/how-to-list-all-docker-container-names-and-their-ips

16g · 2020-07-07T14:44:08Z

@

This is what worked for me:
docker ps -q | xargs -n 1 docker inspect --format '{{ .Name }} {{range .NetworkSettings.Networks}} {{.IPAddress}}{{end}}' | sed 's#^/##';
Got it here: https://bytefreaks.net/applications/docker/how-to-list-all-docker-container-names-and-their-ips

Thank you! Its worked for me too

yebo29 · 2021-03-15T17:18:28Z

I wanted to get the container's port as well, so I added the following to my .bashrc:

function dip() {
        if [ -z $1 ]; then
                docker ps -a --format "{{.ID}}" | while read -r line ; do
                        echo $line $(docker inspect --format "{{ .Name }} {{ .NetworkSettings.Networks.bridge.IPAddress }}" $line | sed 's/\///'):$(docker port "$line" | grep -o "0.0.0.0:.*" | cut -f2 -d:)
                done
        else
                echo $(docker inspect --format "{{.ID }} {{ .Name }} {{ .NetworkSettings.Networks.bridge.IPAddress }}" $1 | sed 's/\///'):$(docker port "$1" | grep -o "0.0.0.0:.*" | cut -f2 -d:)
        fi
}

Running dip in the command line prints out all container's ID, name, IP, and port, and running dip [id] prints out just that container's ID, name, IP, and port.

Expansion of this:

function dip() {
        if [ -z $1 ]; then
                docker ps -a --format "{{.ID}}" | while read -r line ; do
                        PORTS=$(docker port "$line" | grep -o "0.0.0.0:.*" | cut -f2 -d:)
                        if [ -z "${PORTS}" ]; then
                            echo $line $(docker inspect --format "{{ .Name }} {{range .NetworkSettings.Networks}} {{.IPAddress}}{{end}}" $line | sed 's/\///'):" No open ports"
                        else
                            echo $line $(docker inspect --format "{{ .Name }} {{range .NetworkSettings.Networks}} {{.IPAddress}}{{end}}" $line | sed 's/\///'):${PORTS}
                        fi
                done
        else
                echo $(docker inspect --format "{{.ID }} {{ .Name }} {{ .NetworkSettings.Networks.bridge.IPAddress }}" $1 | sed 's/\///'):$(docker port "$1" | grep -o "0.0.0.0:.*" | cut -f2 -d:)
        fi
}

Will report "no open ports" for containers that are not exposing ports to the outside world. Also fixed an issue on my docker cli Docker version 20.10.5, build 55c4c88where the IP was not showing up using a previous comment.

Sample output:

billybob@Pi4:~ $ dip
98f0bc13fde0 portainer 172.xx.xx.xx:8000 9000
fb50db9e9e3d rpi-docker-bob_1 172.xx.xx.2: No open ports

Looooopy · 2021-04-13T14:10:24Z

A formatted extended version

function dip() {
        _print_container_info() {
            local container_id
            local container_ports
            local container_ip
            local container_name
            container_id="${1}"
        
            container_ports=( $(docker port "$container_id" | grep -o "0.0.0.0:.*" | cut -f2 -d:) )
            container_name="$(docker inspect --format "{{ .Name }}" "$container_id" | sed 's/\///')"
            container_ip="$(docker inspect --format "{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}" "$container_id")"
            printf "%-13s %-40s %-20s %-80s\n" "$container_id" "$container_name" "$container_ip" "${container_ports[*]}"
        }

        local container_id
        container_id="$1"
        printf "%-13s %-40s %-20s %-80s\n" 'Container Id' 'Container Name' 'Container IP' 'Container Ports'
        if [ -z "$container_id" ]; then
            local container_id
            docker ps -a --format "{{.ID}}" | while read -r container_id ; do
                _print_container_info  "$container_id"
            done
        else
            _print_container_info  "$container_id"
        fi
}

Sample output

bash-5.0$ dip
Container Id  Container Name                           Container IP         Container Ports
09c4a002720b  ab_rabbitbus_1                           172.64.0.8           25672 5671 5672 15671 15672

yebo29 · 2021-04-13T20:04:38Z

A formatted extended version

function dip() {
        _print_container_info() {
            local container_id
            local container_ports
            local container_ip
            local container_name
            container_id="${1}"
        
            container_ports=( $(docker port "$container_id" | grep -o "0.0.0.0:.*" | cut -f2 -d:) )
            container_name="$(docker inspect --format "{{ .Name }}" "$container_id" | sed 's/\///')"
            container_ip="$(docker inspect --format "{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}" "$container_id")"
            printf "%-13s %-40s %-20s %-80s\n" "$container_id" "$container_name" "$container_ip" "${container_ports[*]}"
        }

        local container_id
        container_id="$1"
        printf "%-13s %-40s %-20s %-80s\n" 'Container Id' 'Container Name' 'Container IP' 'Container Ports'
        if [ -z "$container_id" ]; then
            local container_id
            docker ps -a --format "{{.ID}}" | while read -r container_id ; do
                _print_container_info  "$container_id"
            done
        else
            _print_container_info  "$container_id"
        fi
}

Sample output

bash-5.0$ dip
Container Id  Container Name                           Container IP         Container Ports
09c4a002720b  ab_rabbitbus_1                           172.64.0.8           25672 5671 5672 15671 15672

NICE! Thanks!

mats-nk · 2021-10-03T10:59:29Z

A formatted extended version

function dip() {
        _print_container_info() {
            local container_id
            local container_ports
            local container_ip
            local container_name
            container_id="${1}"
        
            container_ports=( $(docker port "$container_id" | grep -o "0.0.0.0:.*" | cut -f2 -d:) )
            container_name="$(docker inspect --format "{{ .Name }}" "$container_id" | sed 's/\///')"
            container_ip="$(docker inspect --format "{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}" "$container_id")"
            printf "%-13s %-40s %-20s %-80s\n" "$container_id" "$container_name" "$container_ip" "${container_ports[*]}"
        }

        local container_id
        container_id="$1"
        printf "%-13s %-40s %-20s %-80s\n" 'Container Id' 'Container Name' 'Container IP' 'Container Ports'
        if [ -z "$container_id" ]; then
            local container_id
            docker ps -a --format "{{.ID}}" | while read -r container_id ; do
                _print_container_info  "$container_id"
            done
        else
            _print_container_info  "$container_id"
        fi
}

Sample output

bash-5.0$ dip
Container Id  Container Name                           Container IP         Container Ports
09c4a002720b  ab_rabbitbus_1                           172.64.0.8           25672 5671 5672 15671 15672

NICE! Thanks!

This is the best function I have seen yet.

Some thoughts tho.

Its slow
Could it be changed to handle the situation when a containers have several IPs ?
And I found the answer by my self, change the row:

container_ip="$(docker inspect --format "{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}" "$container_id")"

to

container_ip="$(docker inspect --format "{{range .NetworkSettings.Networks}}{{.IPAddress}}  {{end}}" "$container_id")"

Thanks

video-online · 2022-09-16T19:57:51Z

docker ps -q | xargs -n 1 docker inspect --format '{{ .NetworkSettings.Networks.dockernet.IPAddress }} {{ .Name }}' | sed 's/ // /'

kerphi · 2022-09-19T15:08:25Z

A dip extended command listing container working dir + container image:

function dip() {
        _print_container_info() {
            local container_id
            local container_ports
            local container_ip
            local container_name
            local container_image
            container_id="${1}"
        
            container_ports=( $(sudo docker port "$container_id" | grep -o "0.0.0.0:.*" | cut -f2 -d:) )
            container_name="$(sudo docker inspect --format "{{ .Name }}" "$container_id" | sed 's/\///')"
            container_workdir="$(sudo docker inspect --format '{{index .Config.Labels "com.docker.compose.project.working_dir" }}' "$container_id")"
            container_ip="$(sudo docker inspect --format "{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}" "$container_id")"
            container_image="$(sudo docker inspect --format "{{ .Config.Image }}" "$container_id" | sed 's/\///')"
            printf "%-40s %-50s %-20s %-20s %-72s\n" "$container_workdir" "$container_name" "$container_ip" "${container_ports[*]}" "$container_image"
        }

        local container_id
        container_id="$1"
        printf "%-40s %-50s %-20s %-20s %-72s\n" 'Container directory' 'Container Name' 'Container IP' 'Container Ports' 'Container Image'
        if [ -z "$container_id" ]; then
            local container_id
            sudo sudo docker ps -a --format "{{.Names}} {{.ID}}" | sort | sed 's#^[^ ]\+ ##g' | while read -r container_id ; do
                _print_container_info  "$container_id"
            done
        else
            _print_container_info  "$container_id"
        fi
}

output example:

Container directory                      Container Name                                     Container IP         Container Ports      Container Image
/opt/pod/abes-filebeat-docker            abes-filebeat                                      192.168.192.2                             docker.elastic.cobeats/filebeat:7.17.0
/opt/pod/abes-hello-docker               abes-hello-batch                                   172.30.0.2                                abesesrabes-hello:develop-batch
/opt/pod/abes-hello-docker               abes-hello-front                                   172.30.0.3           7080                 abesesrabes-hello:develop-front
/opt/pod/abes-hello-docker               abes-hello-web                                     172.30.0.4           7081                 abesesrabes-hello:develop-web
/opt/pod/microwebservices-docker         bacon-cache-warmer-kbart-withdate                  192.168.48.6                              abesesrbacon-cache-warmer:1.3.1
/opt/pod/microwebservices-docker         bacon-cache-warmer-kbart-withoutdate               192.168.48.5                              abesesrbacon-cache-warmer:1.3.1

a1ea321 · 2022-11-16T07:27:18Z

The solutions I see here spawn unnecessarily many processes. (Well, necessary for readable code but not absolutely necessary for the functionality.) I've developed this piece of abomination:

dip () {
    docker_ps="$(
        docker ps --format 'table{{.Names}}|{{.Status}}|{{.Size}}' |
        tail --lines +2 | 
        sort
    )"

    # https://stackoverflow.com/a/20686101
    FORMAT='{{.Name}}|{{range.NetworkSettings.Networks}}{{.IPAddress}}{{end}}' 

    ip_addresses=`
        echo "$docker_ps" |
        cut --fields 1 --delimiter '|' |
        while read -r container; do
            docker inspect --format=$FORMAT $container
        done |
        sed 's|^/||' |  
        sort
    `
    
    { 
        FM="\033[1m%s\033[0m|\033[1m%s\033[0m|\033[1m%s\033[0m|\033[1m%s\033[0m"
        printf "$FM\n" NAMES IP STATUS SIZE
        join -t "|" <(echo "$ip_addresses") <(echo "$docker_ps")
    } | 
    column --separator "|" --output-separator "┊" --table
}

Sample output:

NAMES  ┊IP        ┊STATUS      ┊SIZE
dnsmasq┊172.18.0.2┊Up 7 hours  ┊2B (virtual 6.64MB)
esphome┊172.19.0.2┊Up 5 minutes┊422kB (virtual 270MB)

Notes:

I cannot format it here but the header row is shown bold in the terminal.
You'll probably have to modify this a bit it according to your favorite fields.
I wouldn't be surprised if docker inspect does the job on its own with a contrived enough formatting string. But this was my very first real world use of the join command.
I thought replacing while read -r container with xargs would squeeze out some more speed; but time says otherwise.
My code also spawns too many processes, but at least just two docker processes. Since the docker commands are the expensive part, my code is superior to everything else here. Not. I timed the stuff here against my code, and my code is slower heh heh heh. But docker may be caching results, making my measurement method faulty. Probably not.
Manually adding the header goes against the single source of truth principle: You have to modify two places in order to get one modification. But saves some spawns (and bash-induced-headaches).

GammaGames · 2022-11-16T16:17:51Z

Wow, I hadn't realized people were updating this! Earlier this year I moved the command into a little bash script so I could add some extra helpers like tailing logs and connecting with bash (and so I didn't have to manually sync the changes between machines, just a simple pull): https://github.com/GammaGames/dz
I just updated it with some of your improvements 😄️

AntonioCS · 2022-11-18T21:07:31Z

The dip command is amazing.
One thing I would suggest is moving the "Container directory" to the end as with long directory names it completely breaks the formatting.

scrapix · 2022-12-16T17:05:38Z

@a1ea321 has inspired me to update the dig function:

        _print_container_info() {
            local container_id
            local container_ports
            local container_ip
            local container_gateway
            local container_ipv6
            local container_ipv6_gateway
            local container_name
            container_id="${1}"
        
            container_ports=( $(docker port "$container_id" | grep -o "0.0.0.0:.*" | cut -f2 -d:) )
            container_name="$(docker inspect --format "{{ .Name }}" "$container_id" | sed 's/\///')"
            container_ip="$(docker inspect --format "{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}" "$container_id")"
            container_gateway="$(docker inspect --format "{{range .NetworkSettings.Networks}}{{.Gateway}}{{end}}" "$container_id")"
            container_ipv6="$(docker inspect --format "{{range .NetworkSettings.Networks}}{{.GlobalIPv6Address}}{{end}}" "$container_id")"
            container_ipv6_gateway="$(docker inspect --format "{{range .NetworkSettings.Networks}}{{.IPv6Gateway}}{{end}}" "$container_id")"

            echo ''$container_id','$container_name','$container_ip','$container_gateway','$container_ipv6','$container_ipv6_gateway','${container_ports[*]}'' >> "~/tmp/docker-container.txt"
        }
        
        touch "~/tmp/docker-container.txt"
        echo 'ID,NAME,IP,Gateway,IPv6,IPv6 Gateway,PORTS' >> "~/tmp/docker-container.txt"

        local container_id
        container_id="$1"
        if [ -z "$container_id" ]; then
            local container_id
            docker ps -a --format "{{.ID}}" | while read -r container_id ; do
                _print_container_info  "$container_id"
            done
        else
            _print_container_info  "$container_id"
        fi

       
       column -s "," --output-separator " ┊ " -t  "~/tmp/docker-container.txt"

       rm -r "~/tmp/docker-container.txt"
}

This shows beautifully as:

ID           ┊ NAME           ┊ IP         ┊ Gateway    ┊ IPv6               ┊ IPv6 Gateway  ┊ PORTS
221aa9e5f8a9 ┊ alpine-A       ┊ 172.20.0.2 ┊ 172.20.0.1 ┊                    ┊               ┊
21dfcac1a96f ┊ alpine-bridge2 ┊ 172.17.0.6 ┊ 172.17.0.1 ┊ fd00::1:0:0:2      ┊ fd00::1:0:0:1 ┊
07d37817152f ┊ alpine-bridge3 ┊ 172.17.0.3 ┊ 172.17.0.1 ┊ fd00::1:0:0:3      ┊ fd00::1:0:0:1 ┊
02315ce29e45 ┊ alpine-B       ┊ 172.21.0.2 ┊ 172.21.0.1 ┊                    ┊               ┊
34c3247c609b ┊ portainer      ┊ 172.17.0.2 ┊ 172.17.0.1 ┊ fd00::1:242:ac11:2 ┊ fd00::1:0:0:1 ┊ 9000

It'd be nice to have the tempfile as variable, but i don't know how to do that

scrapix · 2022-12-18T22:09:51Z

In case of interest for anyone:

------------------------------------------------------
NETWORK ┊ SUBNET IPv4     ┊ GATEWAY IPv4 ┊ SUBNET IPv6        ┊ GATEWAY IPv6 ┊ ID
A       ┊ "172.18.0.0/16" ┊ "172.18.0.1" ┊ "fd00::a:0:0:0/80" ┊ null         ┊ 76163ba9d48d
B       ┊ "172.19.0.0/16" ┊ "172.19.0.1" ┊ "fd00::b:0:0:0/80" ┊ null         ┊ 07d4d008ccb7
bridge  ┊ "172.17.0.0/16" ┊ "172.17.0.1" ┊ "fd00::/64"        ┊ null         ┊ b866c9f00180
host    ┊ null            ┊ null         ┊ null               ┊ null         ┊ 1bbbccd2171a
none    ┊ null            ┊ null         ┊ null               ┊ null         ┊ 0016304b38be
------------------------------------------------------
CONTAINER      ┊ IP         ┊ Gateway    ┊ Mac               ┊ IPv6    ┊ IPv6 Gateway ┊ PORTS ┊ Network ┊ ID
alpine-B       ┊ 172.19.0.2 ┊ 172.19.0.1 ┊ 00:00:00:00:00:01 ┊         ┊              ┊       ┊ B       ┊ cd73a2ea1317
alpine-bridge3 ┊ 172.17.0.2 ┊ 172.17.0.1 ┊ 00:00:00:00:00:03 ┊ fd00::3 ┊ fd00::1      ┊       ┊ bridge  ┊ 4dc53b04f25c
alpine-bridge2 ┊ 172.17.0.3 ┊ 172.17.0.1 ┊ 00:00:00:00:00:02 ┊ fd00::2 ┊ fd00::1      ┊       ┊ bridge  ┊ f5230f1ab0cb
alpine-A       ┊ 172.18.0.2 ┊ 172.18.0.1 ┊ 00:00:00:00:00:01 ┊         ┊              ┊       ┊ A       ┊ d0befc3262d3
------------------------------------------------------

this can be achieved with following functions:

function nip() {
        _print_network_info() {
            local network_name
            local network_gatewayIPv4
            local network_subnetIPv4
            local network_gatewayIPv6
            local network_subnetIPv6
            network_id="${1}"
        
            network_name="$(docker inspect --format "{{ .Name }}" "$network_id" | sed 's/\///')"
            network_subnetIPv4="$(docker inspect $network_id | jq '.[].IPAM.Config[0].Subnet')"
            network_gatewayIPv4="$(docker inspect $network_id | jq '.[].IPAM.Config[0].Gateway')"
            network_subnetIPv6="$(docker inspect $network_id | jq '.[].IPAM.Config[1].Subnet')"
            network_gatewayIPv6="$(docker inspect $network_id | jq '.[].IPAM.Config[1].Gateway')"       

            echo ''$network_name','$network_subnetIPv4','$network_gatewayIPv4','$network_subnetIPv6','$network_gatewayIPv6','$network_id'' >> "~/tmp/docker-network.txt"
        }
        
        touch "~/tmp/docker-network.txt"
        echo 'NETWORK,SUBNET IPv4,GATEWAY IPv4,SUBNET IPv6,GATEWAY IPv6,ID' >> "~/tmp/docker-network.txt"

        local network_id
        networkr_id="$1"
        if [ -z "$network_id" ]; then
            local network_id
            docker network ls --format "{{.ID}}" | while read -r network_id ; do
                _print_network_info  "$network_id"
            done
        else
            _print_network_info  "$network_id"
        fi

       
       column -s "," --output-separator " ┊ " -t  "~/tmp/docker-network.txt"

       rm -r "~/tmp/docker-network.txt"
}

echo '------------------------------------------------------'
nip;
echo '------------------------------------------------------'

function cip() {
        _print_container_info() {
            local container_id
            local container_ports
            local container_ip
            local container_gateway
            local container_ipv6
            local container_ipv6_gateway
            local container_name
            local container_mac
            local container_network
            container_id="${1}"
        
            container_ports=( $(docker port "$container_id" | grep -o "0.0.0.0:.*" | cut -f2 -d:) )
            container_name="$(docker inspect --format "{{ .Name }}" "$container_id" | sed 's/\///')"
            container_ip="$(docker inspect --format "{{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}" "$container_id")"
            container_gateway="$(docker inspect --format "{{range .NetworkSettings.Networks}}{{.Gateway}}{{end}}" "$container_id")"
            container_mac="$(docker inspect --format "{{range .NetworkSettings.Networks}}{{.MacAddress}}{{end}}" "$container_id")"
            container_ipv6="$(docker inspect --format "{{range .NetworkSettings.Networks}}{{.GlobalIPv6Address}}{{end}}" "$container_id")"
            container_ipv6_gateway="$(docker inspect --format "{{range .NetworkSettings.Networks}}{{.IPv6Gateway}}{{end}}" "$container_id")"
            container_network="$(docker inspect --format "{{.HostConfig.NetworkMode}}" "$container_id" | sed 's/\///')"

            echo ''$container_name','$container_ip','$container_gateway','$container_mac','$container_ipv6','$container_ipv6_gateway','${container_ports[*]}','$container_network','$container_id'' >> "~/tmp/docker-container.txt"
        }
        
        touch "~/tmp/docker-container.txt"
        echo 'CONTAINER,IP,Gateway,Mac,IPv6,IPv6 Gateway,PORTS,Network,ID' >> "~/tmp/docker-container.txt"

        local container_id
        container_id="$1"
        if [ -z "$container_id" ]; then
            local container_id
            docker ps -a --format "{{.ID}}" | while read -r container_id ; do
                _print_container_info  "$container_id"
            done
        else
            _print_container_info  "$container_id"
        fi

       
       column -s "," --output-separator " ┊ " -t  "~/tmp/docker-container.txt"

       rm -r "~/tmp/docker-container.txt"
}

cip;
echo '------------------------------------------------------'

sanshrestha21 · 2023-02-01T06:50:13Z

[root@localhost ~]# docker ps -a|awk 'NR > 1 {print $1}' | xargs -n 1 docker inspect --format '{{ .ID }} {{range .NetworkSettings.Networks}} {{.IPAddress}}{{end}}' | sed 's#^/##';
26bd5c6380e334e518a9fd967099a649a9768b99bdbd85cf4f6e78c84ace0b39 172.20.0.167
99c294b61cb7405027eff83cf3db0cb2e09aa823faaba08287a0d8967a8b9002 172.17.0.2
cf12cdf6318e7875361d5ec1fda93c2659e5444440cc08a9ef821f36d72dd86e 172.17.0.3

brccabral · 2024-02-24T00:33:08Z

Adding my two cents.

Ports
All examples so far are getting ports from 0.0.0.0, but (for those that don't know), we can listen to a port in a specific IP, not just 0.0.0.0 (or *).
This way we can have different services in the same port, but with different IPs (to access both you will probably need a reverse proxy or edit /etc/hosts or your DNS, but it is out of scope here).

docker run -d ...  -p 192.168.32.12:53:53 ...
docker run -d ...  -p 192.168.44.5:53:53 ...

I use it in my PiHole, and virt-manager. PiHole listens my LAN IP, virt-manager listens its own subnet...

I am using this to extract the ports from all IPs. To get IPv6, I am using a different expression.

container_ports=( $(docker port "$container_id" | grep -o -e ":[0-9]\+*" | cut -f2 -d:) )

IPAddress and Gateway
The same container can be added to different Networks, and on each one it will get its own IP and Gateway. The commands are correct, but it is better to add a space just to visually represent better.

container_ip="$(docker inspect --format "{{range .NetworkSettings.Networks}}{{.IPAddress}} {{end}}" "$container_id")"
container_gateway="$(docker inspect --format "{{range .NetworkSettings.Networks}}{{.Gateway}} {{end}}" "$container_id")"

Networks
Still in the case of a container in multiple networks, just .HostConfig.NetworkMode won't give you all of them.
Loop .NetworkSettings.Networks to get key and value and print just the key.

container_network=( $(docker inspect --format "{{range \$k, \$v := .NetworkSettings.Networks}}{{printf \"%s\n\" \$k}}{{end}}" "$container_id") )

brccabral · 2024-02-24T05:33:07Z

For now, I am happy with this.
Other changes:

search for ID or Name
only calls inner function if ID/Name found
show only ID's first 6 chars
inspect only network or only container

function nip() {
    _print_network_info() {
        local network_search
        local network_name
        local network_id
        local network_gatewayIPv4
        local network_subnetIPv4
        local network_gatewayIPv6
        local network_subnetIPv6
        network_search="${1}"

        network_name="$(docker network inspect --format "{{.Name}}" "$network_search" | sed 's/\///')"
        network_id="$(docker network inspect --format "{{.ID}}" "$network_search")"
        network_subnetIPv4="$(docker network inspect $network_search | jq '.[].IPAM.Config[0].Subnet')"
        network_gatewayIPv4="$(docker network inspect $network_search | jq '.[].IPAM.Config[0].Gateway')"
        network_subnetIPv6="$(docker network inspect $network_search | jq '.[].IPAM.Config[1].Subnet')"
        network_gatewayIPv6="$(docker network inspect $network_search | jq '.[].IPAM.Config[1].Gateway')"

        echo ''$network_name','$network_subnetIPv4','$network_gatewayIPv4','$network_subnetIPv6','$network_gatewayIPv6','${network_id:0:6}'' >>~/tmp/docker-network.txt
    }

    touch ~/tmp/docker-network.txt
    echo '------------------------------------------------------'
    echo 'NETWORK,SUBNET IPv4,GATEWAY IPv4,SUBNET IPv6,GATEWAY IPv6,ID' >>~/tmp/docker-network.txt

    local network_search
    network_search="$1"
    if [ -z "$network_search" ]; then
        # if $network_search is empty
        docker network ls --format "{{.ID}}" | while read -r network_search; do
            _print_network_info "$network_search"
        done
    else
        # only calls _print_network_info if $network_search exits
        docker network ls --format "{{.ID}} {{.Name}}" | grep -q "\b$network_search\b" && _print_network_info "$network_search"
    fi

    column -s "," --output-separator " ┊ " -t ~/tmp/docker-network.txt
    echo '------------------------------------------------------'

    rm -r ~/tmp/docker-network.txt

}

function cip() {
    _print_container_info() {
        local container_search
        local container_id
        local container_ports
        local container_ip
        local container_gateway
        local container_ipv6
        local container_ipv6_gateway
        local container_name
        local container_mac
        local container_network
        container_search="${1}"

        container_ports=($(docker port "$container_search" | grep -o ":[0-9]\+" | cut -f2 -d:))
        container_name="$(docker container inspect --format "{{.Name}}" "$container_search" | sed 's/\///')"
        container_id="$(docker container inspect --format "{{.ID}}" "$container_search")"
        container_ip="$(docker container inspect --format "{{range .NetworkSettings.Networks}}{{.IPAddress}} {{end}}" "$container_search")"
        container_gateway="$(docker container inspect --format "{{range .NetworkSettings.Networks}}{{.Gateway}} {{end}}" "$container_search")"
        container_mac="$(docker container inspect --format "{{range .NetworkSettings.Networks}}{{.MacAddress}} {{end}}" "$container_search")"
        container_ipv6="$(docker container inspect --format "{{range .NetworkSettings.Networks}}{{.GlobalIPv6Address}} {{end}}" "$container_search")"
        container_ipv6_gateway="$(docker container inspect --format "{{range .NetworkSettings.Networks}}{{.IPv6Gateway}} {{end}}" "$container_search")"
        container_network=($(docker container inspect --format "{{range \$k, \$v := .NetworkSettings.Networks}}{{printf \"%s\n\" \$k}}{{end}}" "$container_search"))

        echo ''$container_name','$container_ip','$container_gateway','$container_mac','$container_ipv6','$container_ipv6_gateway','${container_ports[*]}','${container_network[*]}','${container_id:0:6}'' >>~/tmp/docker-container.txt
    }

    touch ~/tmp/docker-container.txt
    echo '------------------------------------------------------'
    echo 'CONTAINER,IP,Gateway,Mac,IPv6,IPv6 Gateway,PORTS,Networks,ID' >>~/tmp/docker-container.txt

    local container_search
    container_search="$1"
    if [ -z "$container_search" ]; then
        # if $container_search is empty
        docker ps -a --format "{{.ID}}" | while read -r container_search; do
            _print_container_info "$container_search"
        done
    else
        # only calls _print_container_info if $container_search exits
        docker container ls --format "{{.ID}} {{.Names}}" | grep -q "\b$container_search\b" && _print_container_info "$container_search"
    fi

    column -s "," --output-separator " ┊ " -t ~/tmp/docker-container.txt
    echo '------------------------------------------------------'

    rm -r ~/tmp/docker-container.txt

}

GammaGames · 2024-02-24T07:19:54Z

Anyone wanna add these changes to the repo version? https://github.com/GammaGames/dz
It’s also got a command to sh into containers.

showing local ports might be useful too, sometimes I bind stuff to 127.0.0.1 and they don’t show up

Edit: brccabral, thanks for the pr! I've also updated the ip function to show host ip when the container isn't listening on 0.0.0.0 since your changes made that way easier to implement, here's what that looks like with a bunch of different configs:

Container Ports
5432:5432/tcp
127.0.0.1:9090:80/tcp
127.0.0.1:8082:80/tcp
127.0.0.1:8084:80/tcp
127.0.0.1:9093:80/tcp
127.0.0.1:8083:80/tcp
host                           
127.0.0.1:9092:80/tcp
9200:9200/tcp 9300:9300/tcp

brccabral · 2024-02-29T20:14:28Z

If anyone interested, GammaGames repo has many updates now, https://github.com/GammaGames/dz . Specially for speed, running the inspect in a single command returns data much faster

# Networks
        network_inspect=$(docker network inspect --format "{{slice .Id 0 12}}""\
,{{.Name}}""\
,{{range .IPAM.Config}}{{.Subnet}}{{end}}""\
,{{range .IPAM.Config}}{{if (index . \"Gateway\")}}{{.Gateway}}{{end}}{{end}}" \
            "${1}")
# Containers
        container_inspect=$(docker container inspect --format "{{slice .Id 0 12}}""\
,{{slice .Name 1}}""\
,{{range .NetworkSettings.Networks}}{{.IPAddress}} {{end}}""\
,{{range \$p, \$conf := .NetworkSettings.Ports}}{{if \$conf}}{{if ne (index \$conf 0).HostIp \"0.0.0.0\"}}{{(index \$conf 0).HostIp}}:{{end}}{{(index \$conf 0).HostPort}}{{else}}null{{end}}:{{\$p}} {{end}}""\
,{{range \$k, \$v := .NetworkSettings.Networks}}{{\$k}}{{end}}""\
,{{range .NetworkSettings.Networks}}{{.Gateway}} {{end}}" \
            ${1})

ipedrazas/gist:2c93f6e74737d1f8a791

zeroows commented Oct 29, 2017

GammaGames commented Oct 19, 2018 •

edited

Loading

AntonioCS commented Jan 31, 2020

16g commented Jul 7, 2020

yebo29 commented Mar 15, 2021 •

edited

Loading

Looooopy commented Apr 13, 2021 •

edited

Loading

yebo29 commented Apr 13, 2021

mats-nk commented Oct 3, 2021 •

edited

Loading

video-online commented Sep 16, 2022

kerphi commented Sep 19, 2022

a1ea321 commented Nov 16, 2022

GammaGames commented Nov 16, 2022

AntonioCS commented Nov 18, 2022

scrapix commented Dec 16, 2022 •

edited

Loading

scrapix commented Dec 18, 2022 •

edited

Loading

sanshrestha21 commented Feb 1, 2023

brccabral commented Feb 24, 2024

brccabral commented Feb 24, 2024

GammaGames commented Feb 24, 2024 •

edited

Loading

brccabral commented Feb 29, 2024

	function drips(){
	docker ps -q \| xargs -n 1 docker inspect --format '{{ .NetworkSettings.IPAddress }} {{ .Name }}' \| sed 's/ \// /'
	}

ipedrazas/gist:2c93f6e74737d1f8a791

zeroows commented Oct 29, 2017

GammaGames commented Oct 19, 2018 • edited Loading

AntonioCS commented Jan 31, 2020

16g commented Jul 7, 2020

yebo29 commented Mar 15, 2021 • edited Loading

Looooopy commented Apr 13, 2021 • edited Loading

yebo29 commented Apr 13, 2021

mats-nk commented Oct 3, 2021 • edited Loading

video-online commented Sep 16, 2022

kerphi commented Sep 19, 2022

a1ea321 commented Nov 16, 2022

GammaGames commented Nov 16, 2022

AntonioCS commented Nov 18, 2022

scrapix commented Dec 16, 2022 • edited Loading

scrapix commented Dec 18, 2022 • edited Loading

sanshrestha21 commented Feb 1, 2023

brccabral commented Feb 24, 2024

brccabral commented Feb 24, 2024

GammaGames commented Feb 24, 2024 • edited Loading

brccabral commented Feb 29, 2024

GammaGames commented Oct 19, 2018 •

edited

Loading

yebo29 commented Mar 15, 2021 •

edited

Loading

Looooopy commented Apr 13, 2021 •

edited

Loading

mats-nk commented Oct 3, 2021 •

edited

Loading

scrapix commented Dec 16, 2022 •

edited

Loading

scrapix commented Dec 18, 2022 •

edited

Loading

GammaGames commented Feb 24, 2024 •

edited

Loading