file.nix

# Edit this configuration file to define what should be installed on
# your system.  Help is available in the configuration.nix(5) man page
# and in the NixOS manual (accessible by running ‘nixos-help’).

{ config, pkgs, ... }:

{
config = {
  imports =
    [ # Include the results of the hardware scan.
      ./hardware-configuration.nix
#      ./zapret_service.nix
    ];

#  disabledModules = [ "services/networking/zapret.nix" ]; # необходимо если версия nixpkgs новее 5a5c04d


  config = {
services.zapret = {
    enable = true;
    mode = "nfqws";

    params = ''
        SET_MAXELEM=522288
        IPSET_OPT="hashsize 262144 maxelem $SET_MAXELEM"

        IP2NET_OPT4="--prefix-length=22-30 --v4-threshold=3/4"
        IP2NET_OPT6="--prefix-length=56-64 --v6-threshold=5"
        AUTOHOSTLIST_RETRANS_THRESHOLD=3
        AUTOHOSTLIST_FAIL_THRESHOLD=3
        AUTOHOSTLIST_FAIL_TIME=60
        AUTOHOSTLIST_DEBUGLOG=0

        MDIG_THREADS=30

        GZIP_LISTS=1
        QUIC_PORTS=50000-65535

        MODE_HTTP=1
        MODE_HTTP_KEEPALIVE=0
        MODE_HTTPS=1
        MODE_QUIC=1
        MODE_FILTER=none

        DESYNC_MARK=0x40000000
        DESYNC_MARK_POSTNAT=0x20000000
        NFQWS_OPT_DESYNC="--dpi-desync=fake --dpi-desync-ttl=0 --dpi-desync-ttl6=0 --dpi-desync-fooling=badsum"
        NFQWS_OPT_DESYNC_HTTP="--dpi-desync=split --dpi-desync-ttl=5"
        NFQWS_OPT_DESYNC_HTTPS="--dpi-desync=fake --dpi-desync-ttl=5"
        NFQWS_OPT_DESYNC_QUIC="--dpi-desync=fake,tamper --dpi-desync-repeats=6 --dpi-desync-any-protocol"

        TPWS_OPT="--hostspell=HOST --split-http-req=method --split-pos=3 --hostcase --oob"

        FLOWOFFLOAD=donttouch

        INIT_APPLY_FW=1

        DISABLE_IPV6=1
    '';
  };

  # Bootloader.
  boot.loader.systemd-boot.enable = true;
  boot.loader.efi.canTouchEfiVariables = true;

  networking.hostName = "nixos"; # Define your hostname.
  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.

  # Configure network proxy if necessary
  # networking.proxy.default = "http://user:password@proxy:port/";
  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";

  # Enable networking
  networking.networkmanager.enable = true;

  

  services.zapret.enable = true;

  # Set your time zone.
  time.timeZone = "Asia/Yekaterinburg";

  # Select internationalisation properties.
  i18n.defaultLocale = "en_US.UTF-8";

  i18n.extraLocaleSettings = {
    LC_ADDRESS = "ru_RU.UTF-8";
    LC_IDENTIFICATION = "ru_RU.UTF-8";
    LC_MEASUREMENT = "ru_RU.UTF-8";
    LC_MONETARY = "ru_RU.UTF-8";
    LC_NAME = "ru_RU.UTF-8";
    LC_NUMERIC = "ru_RU.UTF-8";
    LC_PAPER = "ru_RU.UTF-8";
    LC_TELEPHONE = "ru_RU.UTF-8";
    LC_TIME = "ru_RU.UTF-8";
  };

  # Enable the X11 windowing system.
  services.xserver.enable = true;

  # Enable the KDE Plasma Desktop Environment.
  services.displayManager.sddm.enable = true;
  services.xserver.desktopManager.plasma5.enable = true;

  # Configure keymap in X11
  services.xserver.xkb = {
    layout = "us";
    variant = "";
  };

  # Enable CUPS to print documents.
  services.printing.enable = true;

  # Enable sound with pipewire.
  hardware.pulseaudio.enable = false;
  security.rtkit.enable = true;
  services.pipewire = {
    enable = true;
    alsa.enable = true;
    alsa.support32Bit = true;
    pulse.enable = true;
    # If you want to use JACK applications, uncomment this
    #jack.enable = true;

    # use the example session manager (no others are packaged yet so this is enabled by default,
    # no need to redefine it in your config for now)
    #media-session.enable = true;
  };

  # Enable touchpad support (enabled default in most desktopManager).
  # services.xserver.libinput.enable = true;

  # Define a user account. Don't forget to set a password with ‘passwd’.
  users.users.basil = {
    isNormalUser = true;
    description = "Basil";
    extraGroups = [ "networkmanager" "wheel" ];
    packages = with pkgs; [
      kate
    #  thunderbird
    ];
  };

  # Install firefox.
  programs.firefox.enable = true;

  # Allow unfree packages
  nixpkgs.config.allowUnfree = true;

  # List packages installed in system profile. To search, run:
  # $ nix search wget
  environment.systemPackages = with pkgs; [
  #  vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
  #  wget
     pkgs.zapret
  ];

  # Some programs need SUID wrappers, can be configured further or are
  # started in user sessions.
  # programs.mtr.enable = true;
  # programs.gnupg.agent = {
  #   enable = true;
  #   enableSSHSupport = true;
  # };

  # List services that you want to enable:

  # Enable the OpenSSH daemon.
  # services.openssh.enable = true;

  # Open ports in the firewall.
  # networking.firewall.allowedTCPPorts = [ ... ];
  # networking.firewall.allowedUDPPorts = [ ... ];
  # Or disable the firewall altogether.
  # networking.firewall.enable = false;

  # This value determines the NixOS release from which the default
  # settings for stateful data, like file locations and database versions
  # on your system were taken. It‘s perfectly fine and recommended to leave
  # this value at the release version of the first install of this system.
  # Before changing this value read the documentation for this option
  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
  system.stateVersion = "24.11"; # Did you read the comment?
};
};
}