Last active
November 15, 2021 16:17
-
-
Save itarozzi/06de071b2cf41654eabd0769a3a204bf to your computer and use it in GitHub Desktop.
A comparison between ESP32 BLE Arduino lib and NimBLE
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| ------------------------------------------------------- | |
| ------------------- LIB NimBLE : | |
| > Executing task in folder flr_ble_midi_board: platformio run --target size --environment esp32dev < | |
| source /home/ivan/software-projects-free/python-prj/ble_gatt_server/server1/.env/bin/activate | |
| Processing esp32dev (platform: espressif32; board: esp32dev; framework: arduino) | |
| ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | |
| Verbose mode can be enabled via `-v, --verbose` option | |
| CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/esp32dev.html | |
| PLATFORM: Espressif 32 (3.3.2) > Espressif ESP32 Dev Module | |
| HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash | |
| DEBUG: Current (esp-prog) External (esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa) | |
| PACKAGES: | |
| - framework-arduinoespressif32 3.10006.210326 (1.0.6) | |
| - tool-esptoolpy 1.30100.210531 (3.1.0) | |
| - toolchain-xtensa32 2.50200.97 (5.2.0) | |
| LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf | |
| LDF Modes: Finder ~ chain, Compatibility ~ soft | |
| Found 30 compatible libraries | |
| Scanning dependencies... | |
| Dependency Graph | |
| |-- <ArduinoJson> 6.18.5 | |
| |-- <NimBLE-Arduino> 1.3.1 | |
| Building in release mode | |
| Calculating size .pio/build/esp32dev/firmware.elf | |
| text data bss dec hex filename | |
| 413118 160596 14544 588258 8f9e2 .pio/build/esp32dev/firmware.elf | |
| ===================================================================================== [SUCCESS] Took 3.21 seconds ===================================================================================== | |
| PACKAGES: | |
| - framework-arduinoespressif32 3.10006.210326 (1.0.6) | |
| - tool-esptoolpy 1.30100.210531 (3.1.0) | |
| - toolchain-xtensa32 2.50200.97 (5.2.0) | |
| LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf | |
| LDF Modes: Finder ~ chain, Compatibility ~ soft | |
| Found 30 compatible libraries | |
| Scanning dependencies... | |
| Dependency Graph | |
| |-- <ArduinoJson> 6.18.5 | |
| |-- <NimBLE-Arduino> 1.3.1 | |
| Building in release mode | |
| Retrieving maximum program size .pio/build/esp32dev/firmware.elf | |
| Checking size .pio/build/esp32dev/firmware.elf | |
| Advanced Memory Usage is available via "PlatformIO Home > Project Inspect" | |
| RAM: [= ] 8.9% (used 29260 bytes from 327680 bytes) | |
| Flash: [==== ] 43.8% (used 573714 bytes from 1310720 bytes) | |
| ------------------------------------------------------- | |
| ------------------- LIB ESP32 BLE Arduino: | |
| > Executing task in folder flr_ble_midi_board: platformio run --target size --environment esp32dev < | |
| Processing esp32dev (platform: espressif32; board: esp32dev; framework: arduino) | |
| ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | |
| Verbose mode can be enabled via `-v, --verbose` option | |
| CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/esp32dev.html | |
| PLATFORM: Espressif 32 (3.3.2) > Espressif ESP32 Dev Module | |
| HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash | |
| DEBUG: Current (esp-prog) External (esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa) | |
| PACKAGES: | |
| - framework-arduinoespressif32 3.10006.210326 (1.0.6) | |
| - tool-esptoolpy 1.30100.210531 (3.1.0) | |
| - toolchain-xtensa32 2.50200.97 (5.2.0) | |
| LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf | |
| LDF Modes: Finder ~ chain, Compatibility ~ soft | |
| Found 30 compatible libraries | |
| Scanning dependencies... | |
| Dependency Graph | |
| |-- <ArduinoJson> 6.18.5 | |
| |-- <ESP32 BLE Arduino> 1.0.1 | |
| Building in release mode | |
| Calculating size .pio/build/esp32dev/firmware.elf | |
| text data bss dec hex filename | |
| 805506 180412 17504 1003422 f4f9e .pio/build/esp32dev/firmware.elf | |
| ===================================================================================== [SUCCESS] Took 2.18 seconds ===================================================================================== | |
| Terminale verrà riutilizzato dalle attività, premere un tasto qualsiasi per chiuderlo. | |
| PACKAGES: | |
| - framework-arduinoespressif32 3.10006.210326 (1.0.6) | |
| - tool-esptoolpy 1.30100.210531 (3.1.0) | |
| - toolchain-xtensa32 2.50200.97 (5.2.0) | |
| LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf | |
| LDF Modes: Finder ~ chain, Compatibility ~ soft | |
| Found 30 compatible libraries | |
| Scanning dependencies... | |
| Dependency Graph | |
| |-- <ArduinoJson> 6.18.5 | |
| |-- <ESP32 BLE Arduino> 1.0.1 | |
| Building in release mode | |
| Retrieving maximum program size .pio/build/esp32dev/firmware.elf | |
| Checking size .pio/build/esp32dev/firmware.elf | |
| Advanced Memory Usage is available via "PlatformIO Home > Project Inspect" | |
| RAM: [= ] 10.0% (used 32620 bytes from 327680 bytes) | |
| Flash: [======== ] 75.2% (used 985918 bytes from 1310720 bytes) | |
| Building .pio/build/esp32dev/firmware.bin | |
| esptool.py v3.1 | |
| Merged 1 ELF section | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment