-
-
Save itochan/bcad054a84dd84f1bc2b to your computer and use it in GitHub Desktop.
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| smartctl 6.3 2014-07-26 r3976 [x86_64-apple-darwin13.3.0] (local build) | |
| Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org | |
| === START OF INFORMATION SECTION === | |
| Device Model: APPLE SSD SM128C | |
| Serial Number: S0N7NYAB567408 | |
| LU WWN Device Id: 5 0000f0 000000000 | |
| Firmware Version: AXM09A1Q | |
| User Capacity: 121,332,826,112 bytes [121 GB] | |
| Sector Size: 512 bytes logical/physical | |
| Rotation Rate: Solid State Device | |
| Device is: Not in smartctl database [for details use: -P showall] | |
| ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 1 | |
| SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) | |
| Local Time is: Sun Nov 16 00:05:53 2014 JST | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x00) Offline data collection activity | |
| was never started. | |
| Auto Offline Data Collection: Disabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 840) seconds. | |
| Offline data collection | |
| capabilities: (0x53) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| No Offline surface scan supported. | |
| Self-test supported. | |
| No Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 2) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 14) minutes. | |
| SMART Attributes Data Structure revision number: 1 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x002f 200 200 000 Pre-fail Always - 0 | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 000 Pre-fail Always - 0 | |
| 9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 11011 | |
| 12 Power_Cycle_Count 0x0032 085 085 000 Old_age Always - 14450 | |
| 169 Unknown_Attribute 0x0013 253 253 010 Pre-fail Always - 4071901629568 | |
| 173 Unknown_Attribute 0x0032 176 176 100 Old_age Always - 2216251949679 | |
| 175 Program_Fail_Count_Chip 0x0032 100 100 010 Old_age Always - 0 | |
| 176 Erase_Fail_Count_Chip 0x0032 100 100 010 Old_age Always - 0 | |
| 177 Wear_Leveling_Count 0x0013 085 085 017 Pre-fail Always - 516 | |
| 178 Used_Rsvd_Blk_Cnt_Chip 0x0013 076 076 010 Pre-fail Always - 498 | |
| 179 Used_Rsvd_Blk_Cnt_Tot 0x0013 077 077 010 Pre-fail Always - 948 | |
| 180 Unused_Rsvd_Blk_Cnt_Tot 0x0013 077 077 010 Pre-fail Always - 3212 | |
| 181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0 | |
| 182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0 | |
| 183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0 | |
| 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 | |
| 192 Power-Off_Retract_Count 0x0032 097 097 000 Old_age Always - 14357 | |
| 194 Temperature_Celsius 0x0022 057 057 000 Old_age Always - 43 (Min/Max 17/63) | |
| 195 Hardware_ECC_Recovered 0x001a 253 253 000 Old_age Always - 0 | |
| 197 Current_Pending_Sector 0x0013 100 100 000 Pre-fail Always - 0 | |
| 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 | |
| 199 UDMA_CRC_Error_Count 0x003e 253 253 000 Old_age Always - 0 | |
| SMART Error Log Version: 1 | |
| No Errors Logged | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Extended offline Completed without error 00% 10995 - | |
| # 2 Short offline Completed without error 00% 10995 - | |
| # 3 Short offline Completed without error 00% 10811 - | |
| # 4 Short offline Interrupted (host reset) 90% 10377 - | |
| # 5 Short offline Interrupted (host reset) 90% 10172 - | |
| # 6 Short offline Interrupted (host reset) 90% 9987 - | |
| # 7 Short offline Interrupted (host reset) 90% 9987 - | |
| # 8 Short offline Interrupted (host reset) 90% 9987 - | |
| # 9 Short offline Interrupted (host reset) 90% 9986 - | |
| #10 Short offline Interrupted (host reset) 90% 9986 - | |
| #11 Short offline Interrupted (host reset) 90% 9986 - | |
| #12 Short offline Interrupted (host reset) 90% 9986 - | |
| #13 Short offline Interrupted (host reset) 90% 9986 - | |
| #14 Short offline Interrupted (host reset) 90% 9986 - | |
| #15 Short offline Interrupted (host reset) 90% 9986 - | |
| #16 Short offline Interrupted (host reset) 90% 9985 - | |
| #17 Short offline Interrupted (host reset) 90% 9985 - | |
| #18 Short offline Interrupted (host reset) 90% 9985 - | |
| #19 Short offline Interrupted (host reset) 90% 9985 - | |
| #20 Short offline Interrupted (host reset) 90% 9985 - | |
| #21 Short offline Interrupted (host reset) 90% 9985 - | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment