Last active
January 29, 2021 22:52
-
-
Save ivarprudnikov/8f78bd9114628864f60262eaed6740f5 to your computer and use it in GitHub Desktop.
Connect Bose SoundTouch 10 to WiFi
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # This is a copy/excerpt from Sam Hobbs article | |
| # https://samhobbs.co.uk/2016/01/connect-bose-soundtouch-10-wifi-using-linux-telnet | |
| # Just making sure it does not dissapear into the void before I need it again | |
| # check IP | |
| $ route # or "netstat -rn" on osx | |
| Kernel IP routing table | |
| Destination Gateway Genmask Flags Metric Ref Use Iface | |
| default 192.0.2.1 0.0.0.0 UG 600 0 0 wlan0 | |
| link-local * 255.255.0.0 U 1000 0 0 wlan0 | |
| 192.0.2.0 * 255.255.255.0 U 600 0 0 wlan0 | |
| # connect (on osx "brew install telnet") | |
| $ telnet 192.0.2.1 17000 | |
| Trying 192.0.2.1... | |
| Connected to 192.0.2.1. | |
| Escape character is '^]'. | |
| # display help | |
| ->help | |
| # network wifi profiles add <ssid> <security_type> [<password>] | |
| $ network wifi profiles add foobarHub wpa_or_wpa2 topsecret | |
| # OR for SSID without password | |
| $ network wifi profiles add foobarHub none | |
| # check status | |
| $ network wifi status |
Help output:
->help
? : ? [List available commands( same as help )]
abl
sim
update-not-required : abl sim update-not-required [get out of software version mismatch critical error state]
update-required : abl sim update-required [simulate software version mismatch critical error state]
enter : demo enter [Enter Demo Mode]
exit : demo exit [Exit Demo Mode]
ig : demo ig (<button> | <device> | <all>) <0,1> [Set ignore state for inputs such as keys]
kp : demo kp [Simulate an input event such as key press]
ps
config : demo ps config <preset #> <source> <preset_name> <track_name> <album_name> <artist_name> <station> [Set data for a preset]
standby : demo standby [Enter simulated demo standby]
display : display [display demo]
set
countdown : display set countdown <msg> [upperCount] (default upperCount=5) [Set a countdown msg for OLED display]
dm870 : dm870 get <register> | dm870 set <register> <value> [DM870 commands]
envswitch
accountid
get : envswitch AccountId get [Retrieve AccountId from SystemConfiguration File]
set : envswitch AccountId set <UUID> [Put AccountId for new Environment into SystemConfiguration File]
boseurls
set : envswitch boseurls set <BoseServerURL> <SoftwareUpdateURL> [Put new Bose Server Urls into /var/lib/Bose/PersistenceDataRoot/OverrideConfigurationEFE.xml]
newenviron
activate : envswitch newenviron activate <EnvName> <UserAccountName> <AccountPassword> [Activate named environment on current server using named account ]
define : envswitch newenviron define <EnvName> <BoseServerURL> <SoftwareUpdateURL> [Define a new named environment with Bose Server Urls ]
select : envswitch newenviron select <EnvName> <ServerUrl> <UserAccountName> <AccountPassword> [Switch named environment on named account ]
swupdateurl
set : envswitch swupdateurl set <URL> [Put new SwUpdateUrl into /var/lib/Bose/PersistenceDataRoot/OverrideConfigurationEFE.xml]
testenvironments
get : envswitch testenvironments get [Get Test Environments List from Marge]
exit : quit [Exit the CLI session( same as quit )]
ext
capabilities : ext capabilities search|sort [Check search/sort capabilities]
conthist : ext conthist [list of contents]
info : ext info [Check Track Info]
list : ext list [contentid] [start_offset] [count] [List container of a Upnp Server]
loglevel : ext loglevel [<level>] [Set level]
next : ext next [Next track]
pause : ext pause [Pause]
play : ext play [contentid] [track|folder] [Play a track]
prev : ext prev [Previous track]
repeat : ext repeat [on|one|off] [Set repeat mode]
search : ext search [contentid] [start_offset] [count] [search_type] [key_word] [Search a Upnp Server]
select : ext select idx [select a stored music source]
server : ext server | ext server server_uuid [check or set current server]
servers : ext servers [List Upnp Servers]
shuffle : ext shuffle [on|off] [Set shuffle mode]
sources : ext sources [check stored music sources]
status : ext status [Check Play Status]
stop : ext stop [Stop]
tracks : ext tracks [list of play_all tracks]
force_battery : force_battery [force a battery device to be created, regardless of variant]
getpdo : getpdo <pdo_name> [Get PDO data]
getpdosize : getpdo [<pdo_name>] [Get PDO data size in bytes]
gpio : gpio <number> to read, gpio <number> [on | off] to set [Read input GPIO value or set GPIO output value]
help : help [List available commands( same as ? )]
iheart
corruptsessionid : iheart corruptsessionid <user> [Corrupt SessionID to test re-login]
inject
inerror : iheart inject inerror <user> <module> <code> [<count>] [inject inbound service error code]
outerror : iheart inject outerror <user> <module> [<count>] [inject outbound access error]
reqdelay : iheart inject reqdelay <user> <module> <seconds> [delay sending http request]
respdelay : iheart inject respdelay <user> <module> <seconds> [delay http response]
loglevel : iheart loglevel [<0-7>] or loglevel [critical | error | warning | info | debug | test | verbose | insane] [set logging level]
skipsget : iheart skipsget <user> [Get current skip count]
stagingserver : iheart stagingserver [on | off] [enable/disable use of the IHeart staging server (setting is persistent across reboots)]
test
relogin : iheart test relogin <user> [Corrupt SessionID to test re-login]
testautomationlogging : iheart testautomationlogging [on | off] [Turn on test automation logging]
ir : ir <cmd> [args]
echo [on|off] : echo keys to TAP as received; MUST run 'async_responses on' TAP cmd
in order to see the output [IR Device commands]
key : key [key_value (volume_up, volume_down, preset_1, ..., preset_6)] [P&H time out in ms] [Simulate a key press and release or press and hold]
local_services : local_services on [turn on local services (persistent)]
loglevel : loglevel [<level>] or loglevel [<facility> <on|off>] or loglevel conf [Set level, set facility on/off, generate a conf file, (current status if no args)]
logread : logread [on | off] [turn on logread (persistent)]
flush : logread flush <usb/fs> [Flushes the contents of logread to USB or File System (/var/lib/Bose/PersistenceDataRoot/BoseLog/)]
net
analysis : net analysis [Perform a network analysis]
network
ap : network ap on | off [<access point name>] [Turns the access point on and off. When using you must supply an access point name]
dhcp : network dhcp [Displays the current dhcp interface]
loglevel : network loglevel [<0-7>] or loglevel [critical | error | warning | info | debug | test | verbose | insane] [set logging level]
mode : network mode auto | wifioff | wifisetup [Sets the current network operational mode to auto: automatically connects to wired Ethernet, if not wired connects using stored wifi profiles, wifioff: turns the WiFi radio off and allows wired Ethernet connection, wifisetup: only connects to the profile supplied by addprofile and allows wired Ethernet connection]
status : network status [Displays the current network status]
wifi
log
ap : network wifi log ap error | warning | info | debug | msgdump | excessive [Set Access Point daemon logging]
sta : network wifi log sta error | warning | info | debug | msgdump | excessive [Set station mode daemon logging]
profiles
add : network wifi profiles add <ssid> <security_type> [<password>] [Attempt to add a wifi profile. The response is asynchronous so run 'async_responses on' to see the response to this command, or type 'network wifi profiles info' to check. Valid security types are none, wep, and wpa_or_wpa2. ]
clear : network wifi profiles clear [Clears all WiFi Profiles]
info : network wifi profiles info [Displays the current wifi profiles]
scan : network wifi scan [<maxresults>] [ on | off ] [Performs a site survey. The response is asynchronous so run 'async_responses on' to see the response to this command. The option on | off switch will turn on and off unsolicited asynchronous responses during wifiseup]
interval : network wifi scan interval [<interval (in seconds) ] [Sets the interval between site scans.]
status : network wifi status [Displays the current wifi status]
pandora
autocomplete : Pandora autocomplete [<off|on>] [Disable/enable autocomplete search]
explain : Pandora explain [explainTrack]
inactivity : Pandora inactivity [<time in minutes>] [Set the inactivity timeout (in minutes)]
list
accounts : Pandora list accounts [List the available accounts]
stations : Pandora list stations [<maximum stations>] [List the available stations]
tracks : Pandora list tracks [List tracks for current station]
logout : Pandora logout [Logout]
maint : Pandora maint [<off|on>] [Set the maintenance mode]
playstation : pandora playstation <station index> [Play a station]
rate_enabled : Pandora rate_enabled [<true|false>] [Set the rate enabled/allowed for the current track]
rating : Pandora rating [<DOWN|NONE|UP>] [Set the rating for the current track]
restrict : Pandora restrict [<off|on>] [Set the Restriced License mode]
select
account : Pandora select [<account id>] [Select account]
thumbs : Pandora thumbs up[down] [Thumbs up/down]
quit : quit [Quit the CLI session( same as exit )]
rhinoled
blink : rhinoled blink 0-63 [amber,white,blue] [wifi,bt,aux,shelby] [Rhino LED at blink animation]
disable : rhinoled disable [Disable PRU]
intensity : rhinoled intensity 0-63 [amber,white,blue] [wifi,bt,aux,shelby] [Rhino LED at given intensity]
off : rhinoled off [amber,white,blue] [wifi,bt,aux,shelby] [Rhino LED turned off]
pulsing : rhinoled pulsing 0-63 [amber,white,blue] [wifi,bt,aux,shelby] [Rhino LED pulsing animation]
status : rhinoled status [wifi,bt,aux,shelby] [Returns current LED status for each led or one led if specified]
update
downloading : rhinoled update downloading [Set LED for update downloading]
installing : rhinoled update installing [Set LED for update installing]
wifi
connected : rhinoled wifi connected [Set LED for wifi connected while system on]
connecting : rhinoled wifi connecting [Set LED for wifi connecting while system on]
disconnected : rhinoled wifi disconnected [Set LED for wifi disconnected while system on]
wifisetup : rhinoled wifisetup [Set LED for wifi Setup mode]
rtc : rtc [gettime, getalarm, enablealarm, disablealarm, getwk, read, settime, setalarm yyyy - mm - dd hh : mm : ss, setwk yyyy - mm - dd hh : mm : ss 1( 0 )]
scm
exp : scm exp [scm experiments]
fs_ver : scm fs_ver [display the fs version]
kill : scm kill [kill a process]
list : scm list [List processes scm manages]
log
purge : scm log purge [purge scm log file]
read : scm log read [read back scm log file]
lsusb : scm lsusb [displays any usb attached media]
mfgdata : scm mfgdata [display the manufacturing data]
per : scm per on|off [turn peripherals on or off]
restart : scm restart [restart a process if it is restartable, otherwise, kill the process]
restartnc : scm restartnc [restart noncore processes]
sim
amp-fault : scm sim amp-fault [simulate detected amp-fault condition]
standby
lowpower : scm standby lowpower [Go to lowpower standby]
network : scm standby network [Go to network standby]
start : scm start [start a process if it is not running, otherwise, no-op]
termnc : scm termnc [terminate noncore processes]
test
buttonled : scm test buttonled [start to test buttons and leds]
uboot_ver : scm uboot_ver [display the uboot version]
wakeup : scm wakeup 0|1 (0--reboot linux; 1-- resume apps) [set scm wakeup option (experimental)]
set
master : set master <IP address> [Performs a set master call to APServer with master IP as the address]
spotify
active
speaker : Spotify active speaker [Check if we are the active speaker]
app
next : Spotify app next [Simulate skip next being pressed in the spotify app]
pause : Spotify app pause [Simulate pause being pressed in the spotify app]
play : Spotify app play [Simulate play being pressed in the spotify app]
prev : Spotify app prev [Simulate skip previous being pressed in the spotify app]
audio
pause : Spotify audio pause [Send a pause to audio path]
play : Spotify audio play [Send a play to audio path]
bitrate : Spotify bitrate [0(low) | 1(normal) | 2(high)] [Set the library's audio bitrate]
connection : Spotify connection [none | wired | wireless | mobile] [Get or set the library's connection value]
debug : Spotify
get
access
token : Spotify get access token <refresh_token> [Use the specified refresh token to get an access token (asyncronous output)]
libuser : Spotify get libuser [Show the username of the user logged into the Spotify library]
position : Spotify get position [See what the library is reporting for the current track position]
sdk : Spotify get sdk [Show the version of the Spotify SDK library]
tokens : Spotify get tokens <code> [Using the specified code to get access and refresh tokens (asyncronous output)]
user
info : Spotify get user info <access_token> [Get user info with the specified access token (asyncronous output)]
invalidate : Spotify invalidate [Invalidate the access token for all users for testing]
logged
in : Spotify logged in [Check to see if the the library is logged in]
loginoauth : Spotify loginoauth <user> <access token> [Attempts to log the library in using the specified access token]
loglevel : Spotify loglevel [<0-7>] or loglevel [critical | error | warning | info | debug | test | verbose | insane] [set logging level]
logout : Spotify logout [Log the current user out]
next : Spotify next [Send next to spotify lib]
pause : Spotify pause [Send pause to spotify lib]
play : Spotify play [Send play to spotify lib]
prev : Spotify prev [Send previous to spotify lib]
reset
stream : Spotify reset stream [Reset the audio buffers and tell the AP to stop and reset the url]
seek : Spotify seek [time in ms] [Seek to the specified position or if none specified to the last known position]
selecteduser : Spotify selecteduser [Get the selected spotify user account]
user : Spotify user [Show the last logged in user]
users : Spotify users [Print the spotify user accounts]
zeroconf
vars : Spotify zeroconf vars [Get the current zeroconf vars from the library]
stp_s
crash : stp_s crash [will cause the process to crash]
info : stp_s info [will display info about stp]
loglevel : stp_s loglevel [<0-7>] or loglevel [critical | error | warning | info | debug | test | verbose | insane] [set logging level]
ping : stp_s ping [will send a ping message]
swupdate
abort : swupdate abort [Abort the software update operation]
query : swupdate query [Request the software update server status. Use 'swupdate view' to see the results]
start : swupdate start [Start the software update operation]
view : swupdate view [Display the current software update status]
sys
auxkey : sys auxkey [Set the aux button]
broadcast : sys broadcast
sys setupap <enable/disable> [Set whether setupap mode (auto/off)]
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Another useful script re Bose https://github.com/sijeffrey/SoundTouch/blob/master/bose