Last active
August 14, 2018 05:32
-
-
Save jacobrosenthal/6814a2fa2d101827b1bd6f6ecaf4fd47 to your computer and use it in GitHub Desktop.
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
From 727cffc1735597e950abdc605edf935b535466dc Mon Sep 17 00:00:00 2001 | |
From: Jacob Rosenthal <[email protected]> | |
Date: Mon, 30 Jul 2018 14:39:28 -0700 | |
Subject: [PATCH] add s110 syscalls | |
--- | |
libr/syscall/d/Makefile | 1 + | |
libr/syscall/d/meson.build | 1 + | |
libr/syscall/d/s110-arm-16.sdb.txt | 134 +++++++++++++++++++++++++++++++++++++ | |
3 files changed, 136 insertions(+) | |
create mode 100644 libr/syscall/d/s110-arm-16.sdb.txt | |
diff --git a/libr/syscall/d/Makefile b/libr/syscall/d/Makefile | |
index 5a19bdac7..00c5833b2 100644 | |
--- a/libr/syscall/d/Makefile | |
+++ b/libr/syscall/d/Makefile | |
@@ -8,6 +8,7 @@ F+= linux-x86-32 | |
F+= linux-x86-64 | |
F+= linux-arm-32 | |
F+= linux-arm-64 | |
+F+= s110-arm-16 | |
F+= linux-mips-32 | |
F+= linux-sparc-32 | |
F+= darwin-x86-32 | |
diff --git a/libr/syscall/d/meson.build b/libr/syscall/d/meson.build | |
index 9f6b75ec4..8c33d5fb3 100644 | |
--- a/libr/syscall/d/meson.build | |
+++ b/libr/syscall/d/meson.build | |
@@ -5,6 +5,7 @@ sdb_files = [ | |
'ios-arm-64', | |
'linux-x86-32', | |
'linux-x86-64', | |
+ 's110-arm-16', | |
'linux-arm-32', | |
'linux-arm-64', | |
'linux-mips-32', | |
diff --git a/libr/syscall/d/s110-arm-16.sdb.txt b/libr/syscall/d/s110-arm-16.sdb.txt | |
new file mode 100644 | |
index 000000000..6ad0387f0 | |
--- /dev/null | |
+++ b/libr/syscall/d/s110-arm-16.sdb.txt | |
@@ -0,0 +1,134 @@ | |
+_=0x80 | |
+DFU_BLE_SVC_SET_PEER_DATA=0x80,0 | |
+BOOTLOADER_SVC_LAST=0x80,1 | |
+SD_SOFTDEVICE_ENABLE=0x80,16 | |
+SD_SOFTDEVICE_DISABLE=0x80,17 | |
+SD_SOFTDEVICE_IS_ENABLED=0x80,18 | |
+SD_SOFTDEVICE_VECTOR_TABLE_BASE_SET=0x80,19 | |
+SVC_SDM_LAST=0x80,20 | |
+SD_MBR_COMMAND=0x80,24 | |
+SD_PPI_CHANNEL_ENABLE_GET=0x80,32 | |
+SD_PPI_CHANNEL_ENABLE_SET=0x80,33 | |
+SD_PPI_CHANNEL_ENABLE_CLR=0x80,34 | |
+SD_PPI_CHANNEL_ASSIGN=0x80,35 | |
+SD_PPI_GROUP_TASK_ENABLE=0x80,36 | |
+SD_PPI_GROUP_TASK_DISABLE=0x80,37 | |
+SD_PPI_GROUP_ASSIGN=0x80,38 | |
+SD_PPI_GROUP_GET=0x80,39 | |
+SD_FLASH_PAGE_ERASE=0x80,40 | |
+SD_FLASH_WRITE=0x80,41 | |
+SD_FLASH_PROTECT=0x80,42 | |
+SD_MUTEX_NEW=0x80,43 | |
+SD_MUTEX_ACQUIRE=0x80,44 | |
+SD_MUTEX_RELEASE=0x80,45 | |
+SD_NVIC_ENABLEIRQ=0x80,46 | |
+SD_NVIC_DISABLEIRQ=0x80,47 | |
+SD_NVIC_GETPENDINGIRQ=0x80,48 | |
+SD_NVIC_SETPENDINGIRQ=0x80,49 | |
+SD_NVIC_CLEARPENDINGIRQ=0x80,50 | |
+SD_NVIC_SETPRIORITY=0x80,51 | |
+SD_NVIC_GETPRIORITY=0x80,52 | |
+SD_NVIC_SYSTEMRESET=0x80,53 | |
+SD_NVIC_CRITICAL_REGION_ENTER=0x80,54 | |
+SD_NVIC_CRITICAL_REGION_EXIT=0x80,55 | |
+SD_RAND_APPLICATION_POOL_CAPACITY=0x80,56 | |
+SD_RAND_APPLICATION_BYTES_AVAILABLE=0x80,57 | |
+SD_RAND_APPLICATION_GET_VECTOR=0x80,58 | |
+SD_POWER_MODE_SET=0x80,59 | |
+SD_POWER_SYSTEM_OFF=0x80,60 | |
+SD_POWER_RESET_REASON_GET=0x80,61 | |
+SD_POWER_RESET_REASON_CLR=0x80,62 | |
+SD_POWER_POF_ENABLE=0x80,63 | |
+SD_POWER_POF_THRESHOLD_SET=0x80,64 | |
+SD_POWER_RAMON_SET=0x80,65 | |
+SD_POWER_RAMON_CLR=0x80,66 | |
+SD_POWER_RAMON_GET=0x80,67 | |
+SD_POWER_GPREGRET_SET=0x80,68 | |
+SD_POWER_GPREGRET_CLR=0x80,69 | |
+SD_POWER_GPREGRET_GET=0x80,70 | |
+SD_POWER_DCDC_MODE_SET=0x80,71 | |
+SD_APP_EVT_WAIT=0x80,72 | |
+SD_CLOCK_HFCLK_REQUEST=0x80,73 | |
+SD_CLOCK_HFCLK_RELEASE=0x80,74 | |
+SD_CLOCK_HFCLK_IS_RUNNING=0x80,75 | |
+SD_RADIO_NOTIFICATION_CFG_SET=0x80,76 | |
+SD_ECB_BLOCK_ENCRYPT=0x80,77 | |
+SD_RADIO_SESSION_OPEN=0x80,78 | |
+SD_RADIO_SESSION_CLOSE=0x80,79 | |
+SD_RADIO_REQUEST=0x80,80 | |
+SD_EVT_GET=0x80,81 | |
+SD_TEMP_GET=0x80,82 | |
+SVC_SOC_LAS=0x80,83 | |
+SD_BLE_ENABLE=0x80,96 | |
+SD_BLE_EVT_GET=0x80,97 | |
+SD_BLE_TX_BUFFER_COUNT_GET=0x80,98 | |
+SD_BLE_UUID_VS_ADD=0x80,99 | |
+SD_BLE_UUID_DECODE=0x80,100 | |
+SD_BLE_UUID_ENCODE=0x80,101 | |
+SD_BLE_VERSION_GET=0x80,102 | |
+SD_BLE_USER_MEM_REPLY=0x80,103 | |
+SD_BLE_OPT_SET=0x80,104 | |
+SD_BLE_OPT_GET=0x80,105 | |
+SD_BLE_GAP_ADDRESS_SET=0x80,112 | |
+SD_BLE_GAP_ADDRESS_GET=0x80,113 | |
+SD_BLE_GAP_ADV_DATA_SET=0x80,114 | |
+SD_BLE_GAP_ADV_START=0x80,115 | |
+SD_BLE_GAP_ADV_STOP=0x80,116 | |
+SD_BLE_GAP_CONN_PARAM_UPDATE=0x80,117 | |
+SD_BLE_GAP_DISCONNECT=0x80,118 | |
+SD_BLE_GAP_TX_POWER_SET=0x80,119 | |
+SD_BLE_GAP_APPEARANCE_SET=0x80,120 | |
+SD_BLE_GAP_APPEARANCE_GET=0x80,121 | |
+SD_BLE_GAP_PPCP_SET=0x80,122 | |
+SD_BLE_GAP_PPCP_GET=0x80,123 | |
+SD_BLE_GAP_DEVICE_NAME_SET=0x80,124 | |
+SD_BLE_GAP_DEVICE_NAME_GET=0x80,125 | |
+SD_BLE_GAP_AUTHENTICATE=0x80,126 | |
+SD_BLE_GAP_SEC_PARAMS_REPLY=0x80,127 | |
+SD_BLE_GAP_AUTH_KEY_REPLY=0x80,128 | |
+SD_BLE_GAP_ENCRYPT=0x80,129 | |
+SD_BLE_GAP_SEC_INFO_REPLY=0x80,130 | |
+SD_BLE_GAP_CONN_SEC_GET=0x80,131 | |
+SD_BLE_GAP_RSSI_START=0x80,132 | |
+SD_BLE_GAP_RSSI_STOP=0x80,133 | |
+SD_BLE_GAP_SCAN_START=0x80,134 | |
+SD_BLE_GAP_SCAN_STOP=0x80,135 | |
+SD_BLE_GAP_CONNECT=0x80,136 | |
+SD_BLE_GAP_CONNECT_CANCEL=0x80,137 | |
+SD_BLE_GAP_RSSI_GET=0x80,138 | |
+SD_BLE_GATTC_PRIMARY_SERVICES_DISCOVER=0x80,144 | |
+SD_BLE_GATTC_RELATIONSHIPS_DISCOVER=0x80,145 | |
+SD_BLE_GATTC_CHARACTERISTICS_DISCOVER=0x80,146 | |
+SD_BLE_GATTC_DESCRIPTORS_DISCOVER=0x80,147 | |
+SD_BLE_GATTC_CHAR_VALUE_BY_UUID_READ=0x80,148 | |
+SD_BLE_GATTC_READ=0x80,149 | |
+SD_BLE_GATTC_CHAR_VALUES_READ=0x80,150 | |
+SD_BLE_GATTC_WRITE=0x80,151 | |
+SD_BLE_GATTC_HV_CONFIRM=0x80,152 | |
+SD_BLE_GATTS_SERVICE_ADD=0x80,160 | |
+SD_BLE_GATTS_INCLUDE_ADD=0x80,161 | |
+SD_BLE_GATTS_CHARACTERISTIC_ADD=0x80,162 | |
+SD_BLE_GATTS_DESCRIPTOR_ADD=0x80,163 | |
+SD_BLE_GATTS_VALUE_SET=0x80,164 | |
+SD_BLE_GATTS_VALUE_GET=0x80,165 | |
+SD_BLE_GATTS_HVX=0x80,166 | |
+SD_BLE_GATTS_SERVICE_CHANGED=0x80,167 | |
+SD_BLE_GATTS_RW_AUTHORIZE_REPLY=0x80,168 | |
+SD_BLE_GATTS_SYS_ATTR_SET=0x80,169 | |
+SD_BLE_GATTS_SYS_ATTR_GET=0x80,170 | |
+SD_BLE_L2CAP_CID_REGISTER=0x80,176 | |
+SD_BLE_L2CAP_CID_UNREGISTER=0x80,177 | |
+SD_BLE_L2CAP_TX=0x80,178 | |
+SD_BLE_L2CAP_4=0x80,179 | |
+SD_BLE_L2CAP_5=0x80,180 | |
+SD_BLE_L2CAP_6=0x80,181 | |
+SD_BLE_L2CAP_7=0x80,182 | |
+SD_BLE_L2CAP_8=0x80,183 | |
+SD_BLE_L2CAP_9=0x80,184 | |
+SD_BLE_L2CAP_10=0x80,185 | |
+SD_BLE_L2CAP_11=0x80,186 | |
+SD_BLE_L2CAP_12=0x80,187 | |
+SD_BLE_L2CAP_13=0x80,188 | |
+SD_BLE_L2CAP_14=0x80,189 | |
+SD_BLE_L2CAP_15=0x80,190 | |
+SD_BLE_L2CAP_16=0x80,191 | |
-- | |
2.15.2 (Apple Git-101.1) | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
@sivaramaaa Any thoughts on how to patch /as to be able to get syscall number from immediate for arm thumb platforms?
You can see below that it calls svc 0x7c so I wanna use 0x7c as offset here https://github.com/radare/radare2/blob/master/libr/core/cmd_search.c#L1811