jahentao

# 采用curl命令行方式
# 我的用户名 21851075，密码 123456ABC
username=21851075
password=123456ABC
pass1=$(echo -n $password | md5sum |cut -d ' ' -f1)
pass2=$(echo ${pass1:8:16})
curl -H "Content-Type: application/x-www-form-urlencoded" \
-b srun_login=$username%7C$password \
-A "Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/73.0.3683.86 Safari/537.36" \
-d "username=$username&password=$pass2&drop=0&type=1&n=100"  \

orenyomtov

if [ ! -f /usr/bin/gcc-8 ]; then
    sudo add-apt-repository -y ppa:ubuntu-toolchain-r/test
    sudo apt-get update
    sudo apt-get install -y gcc-8 g++-8

    sudo update-alternatives --install /usr/bin/g++ g++ /usr/bin/g++-8 1000
    sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-8 1000
fi

if [ ! -f /usr/bin/gcc-8 ]; then

dentechy

How to automatically start ssh server on boot on Windows Subsystem for Linux

Microsoft partnered with Canonical to create Bash on Ubuntu on Windows, running through a technology called the Windows Subsystem for Linux. Below are instructions on how to set up the ssh server to run automatically at boot.

1. Edit the /etc/ssh/sshd_config file by running the command sudo vi /etc/ssh/sshd_config and do the following
   1. Change Port to 2222 (or any other port above 1000)
   2. Change PasswordAuthentication to yes. This can be changed back to no if ssh keys are setup.
2. Restart the ssh server:
   • sudo service ssh --full-restart
3. With this setup, the ssh server must be turned on every time you run Bash on Ubuntu on Windows, as by default it is off. Use this command to turn it on:

zhanghai

0. 检查是否已有 ~/bin 目录（~ 即是家目录）。如果没有：   0. 创建目录：mkdir ~/bin。   1. 编辑 ~/.bashrc，加入 export PATH="$HOME/bin:$PATH"。   2. 退出终端并重新打开以使新的 ~/.bashrc 生效（或者执行 source ~/.bashrc）。

ZJUVPN

1. 下载 https://github.com/DreaminginCodeZH/zju-net-utils/raw/master/src/zjuvpn.sh 为 ~/bin/zjuvpn（不带扩展名，用起来方便），并使用 chmod +x ~/bin/zjuvpn 添加可执行权限。
2. 安装 xl2tpd：sudo pacman -S xl2tpd。
3. 配置 ppp：

hygull

STEPS

• Click on Help menu

• Select Enter License

• Then paste given KEY given at bottom

• Finally click on Use License

application2000

These commands are based on a askubuntu answer http://askubuntu.com/a/581497
To install gcc-6 (gcc-6.1.1), I had to do more stuff as shown below.
USE THOSE COMMANDS AT YOUR OWN RISK. I SHALL NOT BE RESPONSIBLE FOR ANYTHING.
ABSOLUTELY NO WARRANTY.

If you are still reading let's carry on with the code.

sudo apt-get update && \
sudo apt-get install build-essential software-properties-common -y && \
sudo add-apt-repository ppa:ubuntu-toolchain-r/test -y && \

ryerh

注意：本文内容适用于 Tmux 2.3 及以上的版本，但是绝大部分的特性低版本也都适用，鼠标支持、VI 模式、插件管理在低版本可能会与本文不兼容。

Tmux 快捷键 & 速查表 & 简明教程

启动新会话：

tmux [new -s 会话名 -n 窗口名]

恢复会话：

wfaler

sudo apt-get install bind9 bind9utils bind9-doc
wget https://dl.bintray.com/mitchellh/consul/0.5.2_linux_amd64.zip

/etc/bind/named.conf.options:
options {
        directory "/var/cache/bind";
        recursion yes;
        allow-query { localhost; };

        forwarders {

lisovy

How to use 'pci pass-through' to run Linux in Qemu accessing real Ath9k adapter
===============================================================================

# Boot kernel with 'intel_iommu=on'

# Unbind driver from the device and bind 'pci-stub' to it
echo "168c 0030" > /sys/bus/pci/drivers/pci-stub/new_id
echo 0000:0b:00.0 > /sys/bus/pci/devices/0000:0b:00.0/driver/unbind
echo 0000:0b:00.0 > /sys/bus/pci/drivers/pci-stub/bind

dynamicguy

# install dependencies
sudo apt-get update
sudo apt-get install -y build-essential
sudo apt-get install -y cmake
sudo apt-get install -y libgtk2.0-dev
sudo apt-get install -y pkg-config
sudo apt-get install -y python-numpy python-dev
sudo apt-get install -y libavcodec-dev libavformat-dev libswscale-dev
sudo apt-get install -y libjpeg-dev libpng-dev libtiff-dev libjasper-dev