This is an init.d/supervisor script for managing a easy_install \ pip install version of supervisor. Add the first file "supervisor" into /etc/init.d/supervisor and put "supervisord.conf" into /etc/supervisor/supervisord.conf

supervisor

#! /bin/sh
#
# skeleton	example file to build /etc/init.d/ scripts.
#		This file should be used to construct scripts for /etc/init.d.
#
#		Written by Miquel van Smoorenburg <[email protected]>.
#		Modified for Debian
#		by Ian Murdock <[email protected]>.
#               Further changes by Javier Fernandez-Sanguino <[email protected]>
#
# Version:	@(#)skeleton  1.9  26-Feb-2001  [email protected]
#
### BEGIN INIT INFO
# Provides:          supervisor
# Required-Start:    $remote_fs $network $named
# Required-Stop:     $remote_fs $network $named
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Start/stop supervisor
# Description:       Start/stop supervisor daemon and its configured
#                    subprocesses.
### END INIT INFO


PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
DAEMON=/usr/local/bin/supervisord
NAME=supervisord
DESC=supervisor
DAEMON_OPTS="-c /etc/supervisor/supervisord.conf"

test -x $DAEMON || exit 0

LOGDIR=/var/log/supervisor
PIDFILE=/var/run/$NAME.pid
DODTIME=5                   # Time to wait for the server to die, in seconds
                            # If this value is set too low you might not
                            # let some servers to die gracefully and
                            # 'restart' will not work

set -e

running_pid()
{
    # Check if a given process pid's cmdline matches a given name
    pid=$1
    name=$2
    [ -z "$pid" ] && return 1
    [ ! -d /proc/$pid ] &&  return 1
    (cat /proc/$pid/cmdline | tr "\000" "\n"|grep -q $name) || return 1
    return 0
}

running()
{
# Check if the process is running looking at /proc
# (works for all users)

    # No pidfile, probably no daemon present
    [ ! -f "$PIDFILE" ] && return 1
    # Obtain the pid and check it against the binary name
    pid=`cat $PIDFILE`
    running_pid $pid $DAEMON || return 1
    return 0
}

force_stop() {
# Forcefully kill the process
    [ ! -f "$PIDFILE" ] && return
    if running ; then
        kill -15 $pid
        # Is it really dead?
        [ -n "$DODTIME" ] && sleep "$DODTIME"s
        if running ; then
            kill -9 $pid
            [ -n "$DODTIME" ] && sleep "$DODTIME"s
            if running ; then
                echo "Cannot kill $LABEL (pid=$pid)!"
                exit 1
            fi
        fi
    fi
    rm -f $PIDFILE
    return 0
}

case "$1" in
  start)
	echo -n "Starting $DESC: "
	start-stop-daemon --start --quiet --pidfile $PIDFILE \
		--exec $DAEMON -- $DAEMON_OPTS
	test -f $PIDFILE || sleep 1
        if running ; then
            echo "$NAME."
        else
            echo " ERROR."
        fi
	;;
  stop)
	echo -n "Stopping $DESC: "
	start-stop-daemon --stop --quiet --oknodo --pidfile $PIDFILE 
	echo "$NAME."
	;;
  force-stop)
	echo -n "Forcefully stopping $DESC: "
        force_stop
        if ! running ; then
            echo "$NAME."
        else
            echo " ERROR."
        fi
	;;
  #reload)
	#
	#	If the daemon can reload its config files on the fly
	#	for example by sending it SIGHUP, do it here.
	#
	#	If the daemon responds to changes in its config file
	#	directly anyway, make this a do-nothing entry.
	#
	# echo "Reloading $DESC configuration files."
	# start-stop-daemon --stop --signal 1 --quiet --pidfile \
	#	/var/run/$NAME.pid --exec $DAEMON
  #;;
  force-reload)
	#
	#	If the "reload" option is implemented, move the "force-reload"
	#	option to the "reload" entry above. If not, "force-reload" is
	#	just the same as "restart" except that it does nothing if the
	#   daemon isn't already running.
	# check wether $DAEMON is running. If so, restart
	start-stop-daemon --stop --test --quiet --pidfile \
		/var/run/$NAME.pid --exec $DAEMON \
	&& $0 restart \
	|| exit 0
	;;
  restart)
    echo -n "Restarting $DESC: "
	start-stop-daemon --stop --quiet --pidfile \
		/var/run/$NAME.pid --exec $DAEMON
	[ -n "$DODTIME" ] && sleep $DODTIME
	start-stop-daemon --start --quiet --pidfile \
		/var/run/$NAME.pid --exec $DAEMON -- $DAEMON_OPTS
	echo "$NAME."
	;;
  status)
    echo -n "$LABEL is "
    if running ;  then
        echo "running"
    else
        echo " not running."
        exit 1
    fi
    ;;
  *)
	N=/etc/init.d/$NAME
	# echo "Usage: $N {start|stop|restart|reload|force-reload}" >&2
	echo "Usage: $N {start|stop|restart|force-reload|status|force-stop}" >&2
	exit 1
	;;
esac

exit 0

supervisord.conf

; Sample supervisor config file.
;
; For more information on the config file, please see:
; http://supervisord.org/configuration.html
;
; Notes:
;  - Shell expansion ("~" or "$HOME") is not supported.  Environment
;    variables can be expanded using this syntax: "%(ENV_HOME)s".
;  - Comments must have a leading space: "a=b ;comment" not "a=b;comment".

[unix_http_server]
file=/var/run/supervisor.sock   ; (the path to the socket file)
;chmod=0700                 ; socket file mode (default 0700)
;chown=nobody:nogroup       ; socket file uid:gid owner
;username=user              ; (default is no username (open server))
;password=123               ; (default is no password (open server))

;[inet_http_server]         ; inet (TCP) server disabled by default
;port=127.0.0.1:9001        ; (ip_address:port specifier, *:port for all iface)
;username=user              ; (default is no username (open server))
;password=123               ; (default is no password (open server))

[supervisord]
logfile=/tmp/supervisord.log ; (main log file;default $CWD/supervisord.log)
logfile_maxbytes=50MB        ; (max main logfile bytes b4 rotation;default 50MB)
logfile_backups=10           ; (num of main logfile rotation backups;default 10)
loglevel=info                ; (log level;default info; others: debug,warn,trace)
pidfile=/var/run/supervisord.pid ; (supervisord pidfile;default supervisord.pid)
nodaemon=false               ; (start in foreground if true;default false)
minfds=1024                  ; (min. avail startup file descriptors;default 1024)
minprocs=200                 ; (min. avail process descriptors;default 200)
;umask=022                   ; (process file creation umask;default 022)
;user=chrism                 ; (default is current user, required if root)
;identifier=supervisor       ; (supervisord identifier, default is 'supervisor')
;directory=/tmp              ; (default is not to cd during start)
;nocleanup=true              ; (don't clean up tempfiles at start;default false)
;childlogdir=/tmp            ; ('AUTO' child log dir, default $TEMP)
;environment=KEY="value"     ; (key value pairs to add to environment)
;strip_ansi=false            ; (strip ansi escape codes in logs; def. false)

; the below section must remain in the config file for RPC
; (supervisorctl/web interface) to work, additional interfaces may be
; added by defining them in separate rpcinterface: sections
[rpcinterface:supervisor]
supervisor.rpcinterface_factory = supervisor.rpcinterface:make_main_rpcinterface

[supervisorctl]
serverurl=unix:///var/run/supervisor.sock ; use a unix:// URL  for a unix socket
;serverurl=http://127.0.0.1:9001 ; use an http:// url to specify an inet socket
;username=chris              ; should be same as http_username if set
;password=123                ; should be same as http_password if set
;prompt=mysupervisor         ; cmd line prompt (default "supervisor")
;history_file=~/.sc_history  ; use readline history if available

; The below sample program section shows all possible program subsection values,
; create one or more 'real' program: sections to be able to control them under
; supervisor.

;[program:theprogramname]
;command=/bin/cat              ; the program (relative uses PATH, can take args)
;process_name=%(program_name)s ; process_name expr (default %(program_name)s)
;numprocs=1                    ; number of processes copies to start (def 1)
;directory=/tmp                ; directory to cwd to before exec (def no cwd)
;umask=022                     ; umask for process (default None)
;priority=999                  ; the relative start priority (default 999)
;autostart=true                ; start at supervisord start (default: true)
;autorestart=unexpected        ; whether/when to restart (default: unexpected)
;startsecs=1                   ; number of secs prog must stay running (def. 1)
;startretries=3                ; max # of serial start failures (default 3)
;exitcodes=0,2                 ; 'expected' exit codes for process (default 0,2)
;stopsignal=QUIT               ; signal used to kill process (default TERM)
;stopwaitsecs=10               ; max num secs to wait b4 SIGKILL (default 10)
;stopasgroup=false             ; send stop signal to the UNIX process group (default false)
;killasgroup=false             ; SIGKILL the UNIX process group (def false)
;user=chrism                   ; setuid to this UNIX account to run the program
;redirect_stderr=true          ; redirect proc stderr to stdout (default false)
;stdout_logfile=/a/path        ; stdout log path, NONE for none; default AUTO
;stdout_logfile_maxbytes=1MB   ; max # logfile bytes b4 rotation (default 50MB)
;stdout_logfile_backups=10     ; # of stdout logfile backups (default 10)
;stdout_capture_maxbytes=1MB   ; number of bytes in 'capturemode' (default 0)
;stdout_events_enabled=false   ; emit events on stdout writes (default false)
;stderr_logfile=/a/path        ; stderr log path, NONE for none; default AUTO
;stderr_logfile_maxbytes=1MB   ; max # logfile bytes b4 rotation (default 50MB)
;stderr_logfile_backups=10     ; # of stderr logfile backups (default 10)
;stderr_capture_maxbytes=1MB   ; number of bytes in 'capturemode' (default 0)
;stderr_events_enabled=false   ; emit events on stderr writes (default false)
;environment=A="1",B="2"       ; process environment additions (def no adds)
;serverurl=AUTO                ; override serverurl computation (childutils)

; The below sample eventlistener section shows all possible
; eventlistener subsection values, create one or more 'real'
; eventlistener: sections to be able to handle event notifications
; sent by supervisor.

;[eventlistener:theeventlistenername]
;command=/bin/eventlistener    ; the program (relative uses PATH, can take args)
;process_name=%(program_name)s ; process_name expr (default %(program_name)s)
;numprocs=1                    ; number of processes copies to start (def 1)
;events=EVENT                  ; event notif. types to subscribe to (req'd)
;buffer_size=10                ; event buffer queue size (default 10)
;directory=/tmp                ; directory to cwd to before exec (def no cwd)
;umask=022                     ; umask for process (default None)
;priority=-1                   ; the relative start priority (default -1)
;autostart=true                ; start at supervisord start (default: true)
;autorestart=unexpected        ; whether/when to restart (default: unexpected)
;startsecs=1                   ; number of secs prog must stay running (def. 1)
;startretries=3                ; max # of serial start failures (default 3)
;exitcodes=0,2                 ; 'expected' exit codes for process (default 0,2)
;stopsignal=QUIT               ; signal used to kill process (default TERM)
;stopwaitsecs=10               ; max num secs to wait b4 SIGKILL (default 10)
;stopasgroup=false             ; send stop signal to the UNIX process group (default false)
;killasgroup=false             ; SIGKILL the UNIX process group (def false)
;user=chrism                   ; setuid to this UNIX account to run the program
;redirect_stderr=true          ; redirect proc stderr to stdout (default false)
;stdout_logfile=/a/path        ; stdout log path, NONE for none; default AUTO
;stdout_logfile_maxbytes=1MB   ; max # logfile bytes b4 rotation (default 50MB)
;stdout_logfile_backups=10     ; # of stdout logfile backups (default 10)
;stdout_events_enabled=false   ; emit events on stdout writes (default false)
;stderr_logfile=/a/path        ; stderr log path, NONE for none; default AUTO
;stderr_logfile_maxbytes=1MB   ; max # logfile bytes b4 rotation (default 50MB)
;stderr_logfile_backups        ; # of stderr logfile backups (default 10)
;stderr_events_enabled=false   ; emit events on stderr writes (default false)
;environment=A="1",B="2"       ; process environment additions
;serverurl=AUTO                ; override serverurl computation (childutils)

; The below sample group section shows all possible group values,
; create one or more 'real' group: sections to create "heterogeneous"
; process groups.

;[group:thegroupname]
;programs=progname1,progname2  ; each refers to 'x' in [program:x] definitions
;priority=999                  ; the relative start priority (default 999)

; The [include] section can just contain the "files" setting.  This
; setting can list multiple files (separated by whitespace or
; newlines).  It can also contain wildcards.  The filenames are
; interpreted as relative to this file.  Included files *cannot*
; include files themselves.

[include]
files = /etc/supervisor/conf.d/*.conf