My in-progress documentation of the Monoprice Mini Delta V2 printer api. This is traffic captured between the included Wiibuilder application and the printer when you connect to the printer through Wiibuilder and send a gcode file to print.
api/printer during print job
{
"sd": {
"ready": false
},
"state": {
"flags": {
"cancelling": false,
"closedOrError": false,
"error": false,
"finishing": false,
"operational": false,
"paused": false,
"pausing": false,
"printing": true,
"ready": false,
"resuming": false,
"sdReady": false
},
"text": "Printing"
},
"temperature": {
"tool0": {
"actual": 200,
"offset": 0,
"target": 0
}
}
}| Path | Value | Notes |
|---|---|---|
| sd/ready | true/false | When the printer is ready to receive a file over wifi (ready for a new print job), false if the sd card is missing |
| state/flags/cancelling | true/false | Unknown; True when the printer is in the process of cancelling a job? |
| state/flags/closedOrError | true/false | Unknown |
| state/flags/error | true/false | Unknown; True when the printer is in an error state? |
| state/flags/finishing | true/false | Unknown; True when the printer is finishing a job? |
| state/flags/operational | true/false | True when the printer is on the main menu of the LCD, ready to receive/start a print job |
| state/flags/paused | true/false | True when the printer is paused |
| state/flags/pausing | true/false | Unknown; True when the printer is pausing a job? |
| state/flags/printing | true/false | True when printer is running a job, false otherwise |
| state/flags/ready | true/false | True when the printer is ready (no job), false otherwise |
| state/flags/resuming | true/false | Unknown; True when the printer is resuming a job after printing? |
| state/flags/sdReady | true/false | Same as sd/ready |
| state/text | text | State text, not what is displayed on the LCD. See "Text messages" below |
| temperature/tool0/actual | integer | Current temperature of the hot end, in C |
| temperature/tool0/offset | integer | Unknown; haven't seen anything other than 0 |
| temperature/tool0/target | integer | Target temperature in C - this is set when a target temp is set on the printer screen, and doesn't clear when you start a print job (even though the target temps are different in the job) |
Text messages:
- Printing - while a print job is running
- Finish - while the "Print Completed" screen is displayed on the printer
- Operational - when the printer is on the main LCD menu
api/job during print:
{
"job": {
"file": {
"date": 0,
"name": "wiibuilder_pos.gcode",
"path": "wiibuilder_pos.gcode",
"origin": "local",
"size": 10
},
"filament": {
"length": 1939.1099853515625,
"volume": 4.6538639068603516
},
"estimatedPrintTime": 2784
},
"progress": {
"completion": 15,
"filepos": 10,
"printTime": 873,
"printTimeLeft": 2341
},
"state": "Printing"
}| Path | Value | Notes |
|---|---|---|
| job/file/date | Unknown | Unknown, always 0 |
| job/file/name | Text | Filename of file currently being printed. If transferred over wifi from Wiibuilder, it will display "wiibuilder_pos.gcode" |
| job/file/path | Text | Path of file currently being printed. If transferred over wifi from Wiibuilder, it will display "wiibuilder_pos.gcode" |
| job/file/origin | Text | Unknown; Origin of file, perhaps? Have always seen it set to local |
| job/file/size | integer | Unknown; Alway set to 10 |
| job/filament/length | float | Length of filament to use, in mm. Seems to match the "FilamentUsed:749.94" comment in gcode files |
| job/filament/volume | float | Unknown |
| job/estimatedPrintTime | integer | Estimated time to complete print job, in seconds |
| job/progress/completion | integer | Print job complete percentage |
| job/progress/filepos | integer | Unknown; Always set to 10 |
| job/progress/printTime | integer | Number of seconds elpased since print job start |
| job/progress/printTimeLeft | integer | Estimated number of seconds left in print job (this is not estimatedPrintTime minus printTime) |
| job/state | text | Job status text, appears to match state/text from api/printer |
/api/printer/printhead
{"command":"jog","x":0.0,"y":0.0,"z":-10.0}
Buttons to test:
- y, z, Home, Cancel print
POST /api/files/local HTTP/1.1
X-Api-Key: 097EBEDA13A1402BB2D07505874E6414
Content-Type: multipart/form-data; boundary=----WebKitFormBoundaryBHFJVxswwyoqKvCt
Host: 192.168.1.174
Content-Length: 4937590
Expect: 100-continue
------WebKitFormBoundaryBHFJVxswwyoqKvCt
Content-Disposition: form-data; name="file"; filename="wiibuilder_pos.gcode"
Content-Type:application/octet-stream
;FLAVOR:Marlin
;TIME:8156
;InfillDensity:20
;FilamentType:PLA
;FilamentUsed:4127.60
;Layer height: 0.14
;MINX:-30.626
;MINY:-24.102
;MINZ:0.32
;MAXX:26.761
;MAXY:20.135
;MAXZ:48.06
;POSTPROCESSED
;Generated with Cura_SteamEngine 4.12.1
; thumbnail begin
W221
W220 5f534a50475f5f0056312e3030008c008c00090010001d0314032b031d0321033c032c031903d702
...the rest of the gcode file...
;SETTING_3 rts = True\\nwall_thickness = 1.2\\nxy_offset_layer_0 = =xy_offset\\n
;SETTING_3 \\n"]}
------WebKitFormBoundaryBHFJVxswwyoqKvCt
Content-Disposition: form-data; name="select"
true
------WebKitFormBoundaryBHFJVxswwyoqKvCt
Content-Disposition: form-data; name="print"
true
------WebKitFormBoundaryBHFJVxswwyoqKvCt--The printer sent back:
HTTP/1.1 201 CREATED
Content-Type: application/json;charset=utf-8
Content-Length: 112And then a json packet:
{
"done": "true",
"files": {
"local": {
"name": "wiibuilder_pos.gcode",
"origin": "local",
"path": "wiibuilder_pos.gcode"
}
}
}
is weird, those are the exact same files I used in my printer and the same as they are in Facebook. I will check the SDcard and confirm you the file names.