lirc.conf.d-SundtekRemoteV3.conf

# Please make this file available to others
# by sending it to <[email protected]>
#
# this config file was automatically generated
# using lirc-0.9.0(devinput) on Tue Aug  5 16:55:09 2014
#
# contributed by 
#
# brand:                       SundtekRemoteV3.conf
# model no. of remote control: 
# devices being controlled by this remote:
#

begin remote

  name  SundtekRemoteV3.conf
  bits           56
  eps            30
  aeps          100

  one             0     0
  zero            0     0
  pre_data_bits   8
  pre_data       0x0
  gap          25473
  toggle_bit_mask 0x0

      begin codes
          KEY_1                    0x01000200000001
          KEY_2                    0x01000300000001
          KEY_3                    0x01000400000001
          KEY_4                    0x01000500000001
          KEY_5                    0x01000600000001
          KEY_6                    0x01000700000001
          KEY_7                    0x01000800000001
          KEY_8                    0x01000900000001
          KEY_9                    0x01000A00000001
          KEY_0                    0x01000B00000001
          KEY_ENTER                0x01016100000001
          KEY_LEFT                 0x01006900000001
          KEY_RIGHT                0x01006A00000001
          KEY_UP                   0x01006700000001
          KEY_DOWN                 0x01006C00000001
          KEY_MENU                 0x01008B00000001
          KEY_VOLUMEUP             0x01007300000001
          KEY_VOLUMEDOWN           0x01007200000001
          KEY_CHANNELUP            0x01019200000001
          KEY_CHANNELDOWN          0x01019300000001
          KEY_EXIT                 0x0100AE00000001
          KEY_INFO                 0x01016600000001
          KEY_TUNER                0x0100E200000001
          KEY_SUBTITLE             0x01017200000001
          KEY_RED                  0x01018E00000001
          KEY_GREEN                0x01018F00000001
          KEY_YELLOW               0x01019000000001
          KEY_BLUE                 0x01019100000001
          KEY_TITLE                0x01017100000001
          KEY_MEDIA                0x0100E200000001
          KEY_TEXT                 0x01018400000001
          KEY_LIST                 0x01018B00000001
          KEY_REWIND               0x0100A800000001
          KEY_FORWARD              0x0100D000000001
          KEY_PREVIOUS             0x01019C00000001
          KEY_NEXT                 0x01019700000001
          KEY_EPG                  0x01016D00000001
          KEY_PLAYPAUSE            0x0100A400000001
          KEY_STOP                 0x01008000000001
          KEY_SCREEN               0x01017400000001
          KEY_EJECTCD              0x0100A100000001
          KEY_RECORD               0x0100A700000001
          KEY_FILE                 0x01009000000001
          KEY_POWER                0x01007400000001
          KEY_MUTE                 0x01007100000001
          KEY_NEW                  0x01018D00000001
          KEY_P                    0x01001900000001
          KEY_S                    0x01001F00000001
      end codes

end remote

lirc_options.conf

# These are the default options to lircd, if installed as
# /etc/lirc/lirc_options.conf. See the lircd(8) and lircmd(8)
# manpages for info on the different options.

[lircd]
nodaemon        = False
driver          = devinput
device          = /dev/input/event11
output          = /var/run/lirc/lircd
pidfile         = /var/run/lirc/lircd.pid
plugindir       = /usr/lib/lirc/plugins
permission      = 666
allow-simulate  = No
repeat-max      = 600
#effective-user =
#listen         = [address:]port
#connect        = host[:port]
#debug          = 6
#uinput         = ...
#release        = ...
#logfile        = ...

[lircmd]
uinput          = False
nodaemon        = False

[modprobe]
#modules        = [lircd_dev, lirc_sir...]

lircd.conf

# Populated config files can be found at http://sf.net/p/lirc-remotes. The
# irdb-get(1) and lirc-setup(1) tools can be used to search and download
# config files.
#
# From 0.9.2 config files could just be dropped as-is in the lircd.conf.d
# directory and be included by this file.

include "lircd.conf.d/*.conf"

lircmd.conf

# Populated config files can be http://sf.net/p/lirc-remotes. The
# irdb-get(1) and lirc-setup(1) tools can be used to search and download
# config files.