Last active
August 11, 2022 02:01
-
-
Save jda/8727e527365d7ccd36a4d9629336706e to your computer and use it in GitHub Desktop.
Boot log from Netgear Orbi RBS40
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Format: Log Type - Time(microsec) - Message - Optional Info | |
| Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic | |
| S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00110 | |
| S - IMAGE_VARIANT_STRING=DAAAANAZA | |
| S - OEM_IMAGE_VERSION_STRING=CRM | |
| S - Boot Config, 0x00000023 | |
| S - Reset status Config, 0x00000000 | |
| S - Core 0 Frequency, 0 MHz | |
| B - 261 - PBL, Start | |
| B - 1339 - bootable_media_detect_entry, Start | |
| B - 34498 - bootable_media_detect_success, Start | |
| B - 34512 - elf_loader_entry, Start | |
| B - 36679 - auth_hash_seg_entry, Start | |
| B - 38831 - auth_hash_seg_exit, Start | |
| B - 73542 - elf_segs_hash_verify_entry, Start | |
| B - 188174 - PBL, End | |
| B - 188199 - SBL1, Start | |
| B - 280251 - pm_device_init, Start | |
| D - 9 - pm_device_init, Delta | |
| B - 281759 - boot_flash_init, Start | |
| D - 36763 - boot_flash_init, Delta | |
| B - 322870 - boot_config_data_table_init, Start | |
| D - 2747 - boot_config_data_table_init, Delta - (419 Bytes) | |
| B - 330625 - clock_init, Start | |
| D - 7534 - clock_init, Delta | |
| B - 341923 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:1 | |
| B - 345330 - sbl1_ddr_set_params, Start | |
| B - 350426 - cpr_init, Start | |
| D - 2 - cpr_init, Delta | |
| B - 354810 - Pre_DDR_clock_init, Start | |
| D - 4 - Pre_DDR_clock_init, Delta | |
| D - 13175 - sbl1_ddr_set_params, Delta | |
| B - 368107 - pm_driver_init, Start | |
| D - 2 - pm_driver_init, Delta | |
| B - 439321 - sbl1_wait_for_ddr_training, Start | |
| D - 28 - sbl1_wait_for_ddr_training, Delta | |
| B - 455502 - Image Load, Start | |
| D - 14603 - QSEE Image Loaded, Delta - (262104 Bytes) | |
| B - 470532 - Image Load, Start | |
| D - 900 - SEC Image Loaded, Delta - (0 Bytes) | |
| B - 480386 - Image Load, Start | |
| D - 12468 - APPSBL Image Loaded, Delta - (415855 Bytes) | |
| B - 493281 - QSEE Execution, Start | |
| D - 60 - QSEE Execution, Delta | |
| B - 499458 - SBL1, End | |
| D - 313372 - SBL1, Delta | |
| S - Flash Throughput, 25695 KB/s (678554 Bytes, 26408 us) | |
| S - DDR Frequency, 672 MHz | |
| U-Boot 2012.07 [Barrier Breaker unknown,unknown] (Dec 01 2016 - 16:53:29) | |
| U-boot dni1 V0.3 for DNI HW ID: 29765515; NOR flash 0MB; EMMC flash 4096MB; RAM 512MB | |
| smem ram ptable found: ver: 1 len: 3 | |
| DRAM: 512 MiB | |
| machid : 0x8010001 | |
| NAND: ID = 0 | |
| Vendor = 0 | |
| Device = 0 | |
| Nand Flash error. Status = 64 | |
| ONFI Read id cmd failed | |
| ONFI probe failed | |
| SF NAND unsupported id:ff:ff:ff:ffSF: Unsupported manufacturer ff | |
| ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0) | |
| 0 MiB | |
| MMC: qca_mmc: 0 | |
| In: serial | |
| Out: serial | |
| Err: serial | |
| Valid chip addresses: 27 48 | |
| machid: 8010001 | |
| flash_type: 1 | |
| Net: MAC0 addr:a0:40:a0:6a:c0:be | |
| PHY ID1: 0x4d | |
| PHY ID2: 0xd0b1 | |
| ipq40xx_ess_sw_init done | |
| eth0 | |
| Hit any key to stop autoboot: 2 1 0 | |
| eth0 PHY0 Down Speed :10 Half duplex | |
| eth0 PHY1 Down Speed :10 Half duplex | |
| eth0 PHY2 Down Speed :10 Half duplex | |
| eth0 PHY3 Down Speed :10 Half duplex | |
| eth0 PHY4 Down Speed :10 Half duplex | |
| nmrp server is stopped or failed ! | |
| Read BootPart from BOARD DATA... | |
| mmc_read will run command: mmc read 0x871cfba8 0x2a22 0x100 | |
| MMC read: dev # 0, block # 10786, count 256 ... 256 blocks read: OK | |
| boot partition : 1 | |
| BootPart = 1 | |
| Loading DNI firmware for checking... | |
| MMC read: dev # 0, block # 17954, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 18210, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 18466, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 18722, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 18978, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 19234, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 19490, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 19746, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 20002, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 20258, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 20514, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 20770, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 21026, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 21282, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 21538, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 21794, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 22050, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 22306, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 22562, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 22818, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 23074, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 23330, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 23586, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 23842, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 24098, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 24354, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 24610, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 24866, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 25122, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 25378, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 25634, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 25890, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 26146, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 26402, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 26658, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 26914, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 27170, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 27426, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 27682, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 27938, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 28194, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 28450, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 28706, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 28962, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 29218, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 29474, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 29730, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 29986, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 30242, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 30498, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 30754, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 31010, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 31266, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 31522, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 31778, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 32034, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 32290, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 32546, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 32802, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 33058, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 33314, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 33570, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 33826, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 34082, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 34338, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 34594, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 34850, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 35106, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 35362, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 35618, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 35874, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 36130, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 36386, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 36642, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 36898, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 37154, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 37410, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 37666, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 37922, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 38178, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 38434, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 38690, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 38946, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 39202, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 39458, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 39714, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 39970, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 40226, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 40482, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 40738, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 40994, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 41250, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 41506, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 41762, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 42018, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 42274, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 42530, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 42786, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 43042, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 43298, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 43554, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 43810, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 44066, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 44322, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 44578, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 44834, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 45090, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 45346, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 45602, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 45858, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 46114, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 46370, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 46626, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 46882, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 47138, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 47394, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 47650, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 47906, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 48162, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 48418, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 48674, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 48930, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 49186, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 49442, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 49698, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 49954, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 50210, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 50466, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 50722, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 50978, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 51234, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 51490, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 51746, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 52002, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 52258, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 52514, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 52770, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 53026, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 53282, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 53538, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 53794, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 54050, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 54306, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 54562, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 54818, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 55074, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 55330, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 55586, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 55842, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 56098, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 56354, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 56610, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 56866, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 57122, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 57378, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 57634, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 57890, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 58146, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 58402, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 58658, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 58914, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 59170, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 59426, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 59682, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 59938, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 60194, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 60450, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 60706, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 60962, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 61218, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 61474, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 61730, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 61986, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 62242, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 62498, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 62754, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 63010, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 63266, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 63522, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 63778, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 64034, count 256 ... 256 blocks read: OK | |
| MMC read: dev # 0, block # 17954, count 1 ... 1 blocks read: OK | |
| ** rootfs address : 0x843bffc0 ** | |
| ## Checking Image at 84000000 ... | |
| FIT image found | |
| FIT description: ARM OpenWrt FIT (Flattened Image Tree) | |
| Image 0 (kernel@1) | |
| Description: ARM OpenWrt Linux-3.14.43 | |
| Type: Kernel Image | |
| Compression: gzip compressed | |
| Data Start: 0x840000e4 | |
| Data Size: 3534032 Bytes = 3.4 MiB | |
| Architecture: ARM | |
| OS: Linux | |
| Load Address: 0x80208000 | |
| Entry Point: 0x80208000 | |
| Hash algo: crc32 | |
| Hash value: 4cb0ebd7 | |
| Hash algo: sha1 | |
| Hash value: e418a90d71057db29f0a6d4c2cdb64db047d1e87 | |
| Image 1 (fdt@1) | |
| Description: ARM OpenWrt qcom-ipq40xx-ap.dkxx_cc device tree blob | |
| Type: Flat Device Tree | |
| Compression: uncompressed | |
| Data Start: 0x8435eef8 | |
| Data Size: 36734 Bytes = 35.9 KiB | |
| Architecture: ARM | |
| Hash algo: crc32 | |
| Hash value: 10167e79 | |
| Hash algo: sha1 | |
| Hash value: 3f0d7b0375e026be6b8eb386d216c2e618ed0098 | |
| Image 2 (fdt@2) | |
| Description: ARM OpenWrt qcom-ipq40xx-ap.dkxx_cc device tree blob | |
| Type: Flat Device Tree | |
| Compression: uncompressed | |
| Data Start: 0x84367f88 | |
| Data Size: 40270 Bytes = 39.3 KiB | |
| Architecture: ARM | |
| Hash algo: crc32 | |
| Hash value: 73f83954 | |
| Hash algo: sha1 | |
| Hash value: 4543097e005f9e46867a9abdd9db8196a9f9823a | |
| Image 3 (fdt@3) | |
| Description: ARM OpenWrt qcom-ipq40xx-ap.dkxx_cc device tree blob | |
| Type: Flat Device Tree | |
| Compression: uncompressed | |
| Data Start: 0x84371de8 | |
| Data Size: 40360 Bytes = 39.4 KiB | |
| Architecture: ARM | |
| Hash algo: crc32 | |
| Hash value: a78ad6c5 | |
| Hash algo: sha1 | |
| Hash value: 9619bb1249aea8ad7c95d5434773f2af7ab2e998 | |
| Image 4 (fdt@4) | |
| Description: ARM OpenWrt qcom-ipq40xx-ap.dkxx_cc device tree blob | |
| Type: Flat Device Tree | |
| Compression: uncompressed | |
| Data Start: 0x8437bca0 | |
| Data Size: 32659 Bytes = 31.9 KiB | |
| Architecture: ARM | |
| Hash algo: crc32 | |
| Hash value: 7c97eaa5 | |
| Hash algo: sha1 | |
| Hash value: c8c8144e3af54e32f2857ae9f412f0a38cc04df8 | |
| Image 5 (fdt@5) | |
| Description: ARM OpenWrt qcom-ipq40xx-ap.dkxx_cc device tree blob | |
| Type: Flat Device Tree | |
| Compression: uncompressed | |
| Data Start: 0x84383d44 | |
| Data Size: 32805 Bytes = 32 KiB | |
| Architecture: ARM | |
| Hash algo: crc32 | |
| Hash value: 73a5b551 | |
| Hash algo: sha1 | |
| Hash value: cdd59352a6e3608056bb6b20fdbf2008b59dbc5d | |
| Image 6 (fdt@6) | |
| Description: ARM OpenWrt qcom-ipq40xx-ap.dkxx_cc device tree blob | |
| Type: Flat Device Tree | |
| Compression: uncompressed | |
| Data Start: 0x8438be7c | |
| Data Size: 32958 Bytes = 32.2 KiB | |
| Architecture: ARM | |
| Hash algo: crc32 | |
| Hash value: 9a9cb7aa | |
| Hash algo: sha1 | |
| Hash value: 165e9cd769c21d3d68b0905481628abe97aa15b5 | |
| Image 7 (fdt@7) | |
| Description: ARM OpenWrt qcom-ipq40xx-ap.dkxx_cc device tree blob | |
| Type: Flat Device Tree | |
| Compression: uncompressed | |
| Data Start: 0x8439404c | |
| Data Size: 36831 Bytes = 36 KiB | |
| Architecture: ARM | |
| Hash algo: crc32 | |
| Hash value: cd2a4f91 | |
| Hash algo: sha1 | |
| Hash value: 0d17c0a4a93fce71a2d5d8e19f0b61a82c23888e | |
| Image 8 (fdt@8) | |
| Description: ARM OpenWrt qcom-ipq40xx-ap.dkxx_cc device tree blob | |
| Type: Flat Device Tree | |
| Compression: uncompressed | |
| Data Start: 0x8439d13c | |
| Data Size: 36734 Bytes = 35.9 KiB | |
| Architecture: ARM | |
| Hash algo: crc32 | |
| Hash value: e2acd426 | |
| Hash algo: sha1 | |
| Hash value: 7e9951f3dd3c3204086d530ef0dbff000704e554 | |
| Image 9 (fdt@9) | |
| Description: ARM OpenWrt qcom-ipq40xx-ap.dkxx_cc device tree blob | |
| Type: Flat Device Tree | |
| Compression: uncompressed | |
| Data Start: 0x843a61cc | |
| Data Size: 36336 Bytes = 35.5 KiB | |
| Architecture: ARM | |
| Hash algo: crc32 | |
| Hash value: 8d6b05a9 | |
| Hash algo: sha1 | |
| Hash value: 88edde274f135ca69de81e545bb713364cb1a6ed | |
| Default Configuration: 'config@1' | |
| Configuration 0 (config@1) | |
| Description: OpenWrt | |
| Kernel: kernel@1 | |
| FDT: fdt@1 | |
| Configuration 1 (config@2) | |
| Description: OpenWrt | |
| Kernel: kernel@1 | |
| FDT: fdt@2 | |
| Configuration 2 (config@3) | |
| Description: OpenWrt | |
| Kernel: kernel@1 | |
| FDT: fdt@3 | |
| Configuration 3 (config@4) | |
| Description: OpenWrt | |
| Kernel: kernel@1 | |
| FDT: fdt@4 | |
| Configuration 4 (config@5) | |
| Description: OpenWrt | |
| Kernel: kernel@1 | |
| FDT: fdt@5 | |
| Configuration 5 (config@6) | |
| Description: OpenWrt | |
| Kernel: kernel@1 | |
| FDT: fdt@6 | |
| Configuration 6 (config@7) | |
| Description: OpenWrt | |
| Kernel: kernel@1 | |
| FDT: fdt@7 | |
| Configuration 7 (config@8) | |
| Description: OpenWrt | |
| Kernel: kernel@1 | |
| FDT: fdt@8 | |
| Configuration 8 (config@9) | |
| Description: OpenWrt | |
| Kernel: kernel@1 | |
| FDT: fdt@9 | |
| ## Checking hash(es) for FIT Image at 84000000 ... | |
| Hash(es) for Image 0 (kernel@1): crc32+ sha1+ | |
| Hash(es) for Image 1 (fdt@1): crc32+ sha1+ | |
| Hash(es) for Image 2 (fdt@2): crc32+ sha1+ | |
| Hash(es) for Image 3 (fdt@3): crc32+ sha1+ | |
| Hash(es) for Image 4 (fdt@4): crc32+ sha1+ | |
| Hash(es) for Image 5 (fdt@5): crc32+ sha1+ | |
| Hash(es) for Image 6 (fdt@6): crc32+ sha1+ | |
| Hash(es) for Image 7 (fdt@7): crc32+ sha1+ | |
| Hash(es) for Image 8 (fdt@8): crc32+ sha1+ | |
| Hash(es) for Image 9 (fdt@9): crc32+ sha1+ | |
| ## Checking Image at 843bffc0 ... | |
| Legacy image found | |
| Image Name: ARM OpenWrt Linux-3.14.43 | |
| Image Type: ARM Linux Kernel Image (lzma compressed) | |
| Data Size: 19791872 Bytes = 18.9 MiB | |
| Load Address: 40908000 | |
| Entry Point: 40908000 | |
| Verifying Checksum ... OK | |
| mmc_read will run command: mmc read 0x871cfba8 0x2a22 0x100 | |
| MMC read: dev # 0, block # 10786, count 256 ... 256 blocks read: OK | |
| boot partition : 1 | |
| MMC read: dev # 0, block # 17954, count 7680 ... 7680 blocks read: OK | |
| ## Booting kernel from FIT Image at 84000000 ... | |
| Using 'config@1' configuration | |
| Trying 'kernel@1' kernel subimage | |
| Description: ARM OpenWrt Linux-3.14.43 | |
| Type: Kernel Image | |
| Compression: gzip compressed | |
| Data Start: 0x840000e4 | |
| Data Size: 3534032 Bytes = 3.4 MiB | |
| Architecture: ARM | |
| OS: Linux | |
| Load Address: 0x80208000 | |
| Entry Point: 0x80208000 | |
| Hash algo: crc32 | |
| Hash value: 4cb0ebd7 | |
| Hash algo: sha1 | |
| Hash value: e418a90d71057db29f0a6d4c2cdb64db047d1e87 | |
| Verifying Hash Integrity ... crc32+ sha1+ OK | |
| ## Flattened Device Tree from FIT Image at 84000000 | |
| Using 'config@1' configuration | |
| Trying 'fdt@1' FDT blob subimage | |
| Description: ARM OpenWrt qcom-ipq40xx-ap.dkxx_cc device tree blob | |
| Type: Flat Device Tree | |
| Compression: uncompressed | |
| Data Start: 0x8435eef8 | |
| Data Size: 36734 Bytes = 35.9 KiB | |
| Architecture: ARM | |
| Hash algo: crc32 | |
| Hash value: 10167e79 | |
| Hash algo: sha1 | |
| Hash value: 3f0d7b0375e026be6b8eb386d216c2e618ed0098 | |
| Verifying Hash Integrity ... crc32+ sha1+ OK | |
| Booting using the fdt blob at 0x8435eef8 | |
| Uncompressing Kernel Image ... OK | |
| Loading Device Tree to 871e3000, end 871eef7d ... OK | |
| Using machid 0x8010001 from environment | |
| Starting kernel ... | |
| Booting Linux on physical CPU 0x0 | |
| Linux version 3.14.43 (figo.yan@dni-l-sw02) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.01 r36088) ) #2 SMP PREEMPT Thu Mar 9 12:45:55 EST 2017 | |
| CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d | |
| CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
| Machine model: Qualcomm Technologies, Inc. IPQ40xx/AP-DK04.1-C1 | |
| Memory policy: Data cache writealloc | |
| PERCPU: Embedded 8 pages/cpu @dfbc8000 s9024 r8192 d15552 u32768 | |
| Built 1 zonelists in Zone order, mobility grouping on. Total pages: 128768 | |
| Kernel command line: rootwait clk_ignore_unused | |
| PID hash table entries: 2048 (order: 1, 8192 bytes) | |
| Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) | |
| Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) | |
| Memory: 507272K/519168K available (4942K kernel code, 277K rwdata, 1464K rodata, 180K init, 258K bss, 11896K reserved, 0K highmem) | |
| Virtual kernel memory layout: | |
| vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
| fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) | |
| vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) | |
| lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) | |
| pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
| modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
| .text : 0xc0208000 - 0xc0849d10 (6408 kB) | |
| .init : 0xc084a000 - 0xc0877340 ( 181 kB) | |
| .data : 0xc0878000 - 0xc08bd47c ( 278 kB) | |
| .bss : 0xc08bd47c - 0xc08fdd40 ( 259 kB) | |
| SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
| Preemptible hierarchical RCU implementation. | |
| NR_IRQS:16 nr_irqs:16 16 | |
| Architected cp15 timer(s) running at 48.00MHz (virt). | |
| sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 2863311552512ns | |
| Switching to timer-based delay loop | |
| Calibrating delay loop (skipped), value calculated using timer frequency.. 96.00 BogoMIPS (lpj=480000) | |
| pid_max: default: 32768 minimum: 301 | |
| Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
| Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
| CPU: Testing write buffer coherency: ok | |
| CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
| Setting up static identity map for 0x80213398 - 0x802133f0 | |
| CPU1: Booted secondary processor | |
| i2c devices info | |
| CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
| CPU2: Booted secondary processor | |
| i2c devices info | |
| CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 | |
| CPU3: Booted secondary processor | |
| i2c devices info | |
| CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 | |
| Brought up 4 CPUs | |
| SMP: Total of 4 processors activated (384.00 BogoMIPS). | |
| CPU: All CPU(s) started in SVC mode. | |
| VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 | |
| pinctrl core: initialized pinctrl subsystem | |
| regulator-dummy: no parameters | |
| NET: Registered protocol family 16 | |
| DMA: preallocated 2048 KiB pool for atomic coherent allocations | |
| cpuidle: using governor ladder | |
| cpuidle: using governor menu | |
| hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 2 | |
| hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 1 | |
| hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 3 | |
| hw-breakpoint: CPU 1 failed to disable vector catch | |
| hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0 | |
| Version Rollback Feature Disabled | |
| i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2 | |
| i2c i2c-0: Failed to register i2c client tlc59208f at 0x27 (-16) | |
| i2c i2c-0: Can't create device at 0x27 | |
| i2c i2c-0: Failed to register i2c client tlc59208f at 0x27 (-16) | |
| i2c i2c-0: Can't create device at 0x27 | |
| sps:sps is ready. | |
| bio: create slab <bio-0> at 0 | |
| SD0 VccQ: 1800 <--> 3000 mV | |
| SCSI subsystem initialized | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| msm_bus_fabric_init_driver | |
| msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100 | |
| msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100 | |
| msm_bus_device 580000.ad-hoc-bus: Failed to get bus clk for bus4096 ctx1 | |
| msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100 | |
| msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100 | |
| msm_bus_device 580000.ad-hoc-bus: Failed to get bus clk for bus1024 ctx1 | |
| 80000.qcom,pcie supply vreg-3.3 not found, using dummy regulator | |
| 80000.qcom,pcie supply vreg-1.8 not found, using dummy regulator | |
| 80000.qcom,pcie supply vreg-0.9 not found, using dummy regulator | |
| 80000.qcom,pcie supply gdsc-vdd not found, using dummy regulator | |
| msm_pcie_enable: msm_pcie_enable: PCIe: trigger the reset of endpoint of RC0. | |
| msm_pcie_enable: msm_pcie_enable: PCIe RC0 PHY is ready! | |
| msm_pcie_enable: msm_pcie_enable: PCIe: Release the reset of endpoint of RC0. | |
| msm_pcie_enable: msm_pcie_enable: PCIe RC0 link initialized | |
| PCI host bridge to bus 0000:00 | |
| pci_bus 0000:00: root bus resource [io 0x40200000-0x402fffff] | |
| pci_bus 0000:00: root bus resource [mem 0x40300000-0x40ffffff] | |
| pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] | |
| msm_pcie_oper_conf: msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0014[4] is all FFs | |
| PCI: bus0: Fast back to back transfers disabled | |
| pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring | |
| msm_pcie_oper_conf: msm_pcie_oper_conf: Read of RC0 1:0x00 + 0x0014[4] is all FFs | |
| PCI: bus1: Fast back to back transfers disabled | |
| msm_pcie_oper_conf: msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0028[4] is all FFs | |
| pci 0000:00:00.0: BAR 8: assigned [mem 0x40400000-0x405fffff] | |
| pci 0000:00:00.0: BAR 0: assigned [mem 0x40300000-0x40300fff 64bit] | |
| pci 0000:01:00.0: BAR 0: assigned [mem 0x40400000-0x405fffff 64bit] | |
| pci 0000:00:00.0: PCI bridge to [bus 01] | |
| pci 0000:00:00.0: bridge window [mem 0x40400000-0x405fffff] | |
| msm_pcie_probe: msm_pcie_probe: RC0 is enabled in bootup | |
| Switched to clocksource arch_sys_counter | |
| NET: Registered protocol family 2 | |
| create ipmac proc | |
| TCP established hash table entries: 4096 (order: 2, 16384 bytes) | |
| TCP bind hash table entries: 4096 (order: 3, 32768 bytes) | |
| TCP: Hash tables configured (established 4096 bind 4096) | |
| TCP: reno registered | |
| UDP hash table entries: 256 (order: 1, 8192 bytes) | |
| UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) | |
| NET: Registered protocol family 1 | |
| hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available | |
| futex hash table entries: 1024 (order: 4, 65536 bytes) | |
| squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. | |
| SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled | |
| msgmni has been set to 990 | |
| Key type asymmetric registered | |
| Asymmetric key parser 'x509' registered | |
| io scheduler noop registered | |
| io scheduler deadline registered (default) | |
| tcsr 194b000.tcsr: setting usb hs phy mode select = e700e7 | |
| tcsr 1953000.ess_tcsr: setting ess interface select = 0 | |
| tcsr 1949000.tcsr: setting wifi_glb_cfg = 41000000 | |
| tcsr 1957000.tcsr: setting wifi_noc_memtype_m0_m2 = 2222222 | |
| Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled | |
| msm_serial_hsl_probe: detected port #0 (ttyMSM0) | |
| msm_serial_hsl_probe: Bus scaling is disabled | |
| 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 139, base_baud = 115200) is a MSM | |
| msm_hsl_console_setup: console setup on port #0 | |
| console [ttyMSM0] enabled | |
| msm_serial_hsl_probe: detected port #1 (ttyMSM1) | |
| msm_serial_hsl_probe: Bus scaling is disabled | |
| 78b0000.serial: ttyMSM1 at MMIO 0x78b0000 (irq = 140, base_baud = 115200) is a MSM | |
| msm_serial_hsl_init: driver initialized | |
| sps: BAM device 0x07884000 is not registered yet. | |
| sps:BAM 0x07884000 is registered. | |
| sps:BAM 0x07884000 (va:0xe0b40000) enabled: ver:0x19, number of pipes:12 | |
| m25p80 spi0.0: Failed to find sector-size | |
| libphy: ipq40xx_mdio: probed | |
| ipq40xx-mdio 90000.mdio: ipq40xx-mdio driver was registered | |
| dwc3 8a00000.dwc3: no usb2 phy configured | |
| platform 8a00000.dwc3: Driver dwc3 requests probe deferral | |
| dwc3 6000000.dwc3: no usb2 phy configured | |
| platform 6000000.dwc3: Driver dwc3 requests probe deferral | |
| ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| ehci-pci: EHCI PCI platform driver | |
| ehci-platform: EHCI generic platform driver | |
| ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
| ohci-platform: OHCI generic platform driver | |
| usbcore: registered new interface driver usb-storage | |
| i2c /dev entries driver | |
| tlc59208f init! | |
| tlc59208f probe | |
| i2c-core: driver [tlc59208f] using legacy suspend method | |
| i2c-core: driver [tlc59208f] using legacy resume method | |
| debug defined config_mmc_test in mmc_register_driver | |
| debug defined config_mmc_test in mmc_register_driver | |
| sdhci: Secure Digital Host Controller Interface driver | |
| sdhci: Copyright(c) Pierre Ossman | |
| sdhci-pltfm: SDHCI platform and OF driver helper | |
| sdhci_msm 7824900.sdhci: Got SD LDO GPIO #33 | |
| sdhci_msm 7824900.sdhci: Got CD GPIO #22. | |
| mmc0: no vmmc regulator found | |
| mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA | |
| Netfilter messages via NETLINK v0.30. | |
| nf_conntrack version 0.5.0 (7926 buckets, 31704 max) | |
| ip_tables: (C) 2000-2006 Netfilter Core Team | |
| TCP: cubic registered | |
| NET: Registered protocol family 10 | |
| sit: IPv6 over IPv4 tunneling driver | |
| NET: Registered protocol family 17 | |
| Bridge firewalling registered | |
| 8021q: 802.1Q VLAN Support v1.8 | |
| Registering SWP/SWPB emulation handler | |
| regulator-dummy: disabling | |
| mmc0: BKOPS_EN bit is not set | |
| mmc0: new HS200 MMC card at address 0001 | |
| mmcblk mmc0:0001: Card claimed for testing. | |
| debug mmc_bus_probe | |
| mmcblk0: mmc0:0001 M62704 3.53 GiB | |
| mmcblk0boot0: mmc0:0001 M62704 partition 1 2.00 MiB | |
| mmcblk0boot1: mmc0:0001 M62704 partition 2 2.00 MiB | |
| mmcblk0rpmb: mmc0:0001 M62704 partition 3 512 KiB | |
| mmc0: Starting tests of card mmc0:0001... | |
| mmc0: Test case 4. ART read (with data verification and return)... | |
| mmc_art_verify_read: the board_data is 000501 | |
| mmc0: Result: OK | |
| mmc0: Tests completed. | |
| mmc_dni_art_read_boot_part: rootfs part is #01 | |
| read_boot_part_from_art: the rootfs part num is #01 | |
| ART part: device [179:20] mmcblk0p20 set to be root filesystem | |
| #: vol name is 0:SBL1, start is 0x22, size is 0x400, ssz is 0x1 | |
| #: vol name is 0:BOOTCONFIG, start is 0x422, size is 0x400, ssz is 0x1 | |
| #: vol name is 0:QSEE, start is 0x822, size is 0x400, ssz is 0x1 | |
| #: vol name is 0:QSEE_ALT, start is 0xc22, size is 0x400, ssz is 0x1 | |
| #: vol name is 0:CDT, start is 0x1022, size is 0x200, ssz is 0x1 | |
| #: vol name is 0:CDT_ALT, start is 0x1222, size is 0x200, ssz is 0x1 | |
| #: vol name is 0:DDRPARAMS, start is 0x1422, size is 0x200, ssz is 0x1 | |
| #: vol name is 0:APPSBLENV, start is 0x1622, size is 0x200, ssz is 0x1 | |
| #: vol name is 0:APPSBL, start is 0x1822, size is 0x800, ssz is 0x1 | |
| #: vol name is 0:APPSBL_ALT, start is 0x2022, size is 0x800, ssz is 0x1 | |
| #: vol name is 0:ART, start is 0x2822, size is 0x200, ssz is 0x1 | |
| #: vol name is ARTMTD, start is 0x2a22, size is 0x200, ssz is 0x1 | |
| #: vol name is language, start is 0x2c22, size is 0x1000, ssz is 0x1 | |
| #: vol name is config, start is 0x3c22, size is 0x200, ssz is 0x1 | |
| #: vol name is pot, start is 0x3e22, size is 0x200, ssz is 0x1 | |
| #: vol name is traffic_meter, start is 0x4022, size is 0x200, ssz is 0x1 | |
| #: vol name is pot_bak, start is 0x4222, size is 0x200, ssz is 0x1 | |
| #: vol name is traffic_meter.bak, start is 0x4422, size is 0x200, ssz is 0x1 | |
| #: vol name is kernel, start is 0x4622, size is 0x1e00, ssz is 0x1 | |
| #: vol name is rootfs, start is 0x6422, size is 0xf600, ssz is 0x1 | |
| #: vol name is firmware, start is 0x4622, size is 0x11400, ssz is 0x1 | |
| #: vol name is mtdoops, start is 0x15a22, size is 0x200, ssz is 0x1 | |
| #: vol name is cert, start is 0x15c22, size is 0x80, ssz is 0x1 | |
| #: vol name is kernel-2, start is 0x15ca2, size is 0x1e00, ssz is 0x1 | |
| #: vol name is rootfs-2, start is 0x17aa2, size is 0xf600, ssz is 0x1 | |
| #: vol name is firmware-2, start is 0x15ca2, size is 0x11400, ssz is 0x1 | |
| #: vol name is reserved, start is 0x270a2, size is 0x2a5cff, ssz is 0x1 | |
| mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 | |
| mmcblk0boot1: unknown partition table | |
| mmcblk0boot0: unknown partition table | |
| xhci-hcd xhci-hcd.0.auto: xHCI Host Controller | |
| xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 | |
| xhci-hcd xhci-hcd.0.auto: irq 164, io mem 0x08a00000 | |
| usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb1: Product: xHCI Host Controller | |
| usb usb1: Manufacturer: Linux 3.14.43 xhci-hcd | |
| usb usb1: SerialNumber: xhci-hcd.0.auto | |
| hub 1-0:1.0: USB hub found | |
| hub 1-0:1.0: 1 port detected | |
| xhci-hcd xhci-hcd.0.auto: xHCI Host Controller | |
| xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 | |
| usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 | |
| usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb2: Product: xHCI Host Controller | |
| usb usb2: Manufacturer: Linux 3.14.43 xhci-hcd | |
| usb usb2: SerialNumber: xhci-hcd.0.auto | |
| hub 2-0:1.0: USB hub found | |
| hub 2-0:1.0: 1 port detected | |
| xhci-hcd xhci-hcd.1.auto: xHCI Host Controller | |
| xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 | |
| xhci-hcd xhci-hcd.1.auto: irq 168, io mem 0x06000000 | |
| usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 | |
| usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb3: Product: xHCI Host Controller | |
| usb usb3: Manufacturer: Linux 3.14.43 xhci-hcd | |
| usb usb3: SerialNumber: xhci-hcd.1.auto | |
| hub 3-0:1.0: USB hub found | |
| hub 3-0:1.0: 1 port detected | |
| xhci-hcd xhci-hcd.1.auto: xHCI Host Controller | |
| xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 | |
| usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 | |
| usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb4: Product: xHCI Host Controller | |
| usb usb4: Manufacturer: Linux 3.14.43 xhci-hcd | |
| usb usb4: SerialNumber: xhci-hcd.1.auto | |
| hub 4-0:1.0: USB hub found | |
| hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19) | |
| input: gpio_keys.7 as /devices/soc.0/gpio_keys.7/input/input0 | |
| drivers/rtc/hctosys.c: unable to open rtc device (rtc0) | |
| clk: Not disabling unused clocks | |
| VFS: Mounted root (squashfs filesystem) readonly on device 179:20. | |
| Freeing unused kernel memory: 180K (c084a000 - c0877000) | |
| mount: mounting none on /proc/bus/usb failed: No such file or directory | |
| UBIFS error (pid 179): ubifs_mount: cannot open "ubi0:overlay_volume", error -19 | |
| mount: mounting ubi0:overlay_volume on /tmp/overlay failed: No such device | |
| cat: can't open '/overlay/.firmware_time': No such file or directory | |
| ls: /overlay/*: No such file or directory | |
| rm: can't remove '.' or '..' | |
| rm: can't remove '.' or '..' | |
| cp: can't create '/overlay/.firmware_time': Read-only file system | |
| /etc/preinit: line 59: check_board_parameter: not found | |
| - init - | |
| init started: BusyBox v1.24.1 (2017-03-09 11:17:34 EST) | |
| Can't open GPIO device! | |
| Boot up procedure is Finished!!! | |
| sysinit: /etc/rc.common: .: line 90: can't open '/lib/ar71xx.sh' | |
| Error opening atheros LED Device!!! | |
| : No such file or directory | |
| Please press Enter to activate this console. sysinit: /dev/mem opened. | |
| sysinit: Memory mapped at address 0xb6f6a000. | |
| sysinit: Value at address 0x102D000 (0xb6f6a000): 0x4801 | |
| sysinit: Written 0x4902; readback 0x4902 | |
| sysinit: /dev/mem opened. | |
| sysinit: Memory mapped at address 0xb6eff000. | |
| sysinit: Value at address 0x102E000 (0xb6eff000): 0x4801 | |
| sysinit: Written 0x4902; readback 0x4902 | |
| sysinit: /dev/mem opened. | |
| sysinit: Memory mapped at address 0xb6f3f000. | |
| sysinit: Value at address 0x103A000 (0xb6f3f000): 0x20C | |
| sysinit: Written 0x4902; readback 0x4902 | |
| sysinit: /dev/mem opened. | |
| sysinit: Memory mapped at address 0xb6f9c000. | |
| sysinit: Value at address 0x103B000 (0xb6f9c000): 0x208 | |
| sysinit: Written 0x4902; readback 0x4902 | |
| atherosgpio init | |
| sysinit: Failed to connect to the switch. Use the "list" command to see which switches are available. | |
| Loading data from /dev/mmcblk0p14 ... | |
| Done! | |
| The data center is Running ... | |
| sysinit: The region number is: 0x0001 | |
| sysinit: REGION: NA | |
| sysinit: /etc/rc.common: line 90: /usr/sbin/net-wall: not found | |
| QCE50: __qce_init_clk: Unable to get CE core src clk, set to NULL | |
| qcrypto 8e20000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x8e20000 | |
| qcrypto 8e20000.qcrypto: CE device = 0x0 | |
| , IO base, CE = 0xe1180000 | |
| , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3 | |
| IO base BAM = 0x (null) | |
| BAM IRQ 239 | |
| Engines Availability = 0x2010453 | |
| sps:BAM 0x08e04000 is registered. | |
| sps:BAM 0x08e04000 (va:0xe11c0000) enabled: ver:0x27, number of pipes:4 | |
| QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000008e04000 irq 239 | |
| bus_scale_table is NULL | |
| qcrypto 8e20000.qcrypto: qcrypto-ecb-aes | |
| qcrypto 8e20000.qcrypto: qcrypto-cbc-aes | |
| qcrypto 8e20000.qcrypto: qcrypto-ctr-aes | |
| qcrypto 8e20000.qcrypto: qcrypto-ecb-des | |
| qcrypto 8e20000.qcrypto: qcrypto-cbc-des | |
| qcrypto 8e20000.qcrypto: qcrypto-ecb-3des | |
| qcrypto 8e20000.qcrypto: qcrypto-cbc-3des | |
| qcrypto 8e20000.qcrypto: qcrypto-xts-aes | |
| qcrypto 8e20000.qcrypto: qcrypto-sha1 | |
| qcrypto 8e20000.qcrypto: qcrypto-sha256 | |
| qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes | |
| qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des | |
| qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des | |
| qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes | |
| qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des | |
| qcrypto 8e20000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des | |
| qcrypto 8e20000.qcrypto: qcrypto-hmac-sha1 | |
| qcrypto 8e20000.qcrypto: qcrypto-hmac-sha256 | |
| qcrypto 8e20000.qcrypto: qcrypto-aes-ccm | |
| qcrypto 8e20000.qcrypto: qcrypto-rfc4309-aes-ccm | |
| qcrypto: FIPS140-2 Known Answer Tests: Skipped | |
| clbr: module license 'Proprietary' taints kernel. | |
| Disabling lock debugging due to kernel taint | |
| client bridge loaded | |
| device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected] | |
| NTFS driver 2.1.30 [Flags: R/O MODULE]. | |
| PPP generic driver version 2.4.2 | |
| ess-switch DT exist! | |
| switchreg_base_addr: 0xc000000 | |
| switchreg_size: 0x80000 | |
| switch_access_mode: local bus | |
| wan bmp:0x20 | |
| ess-psgmii DT exist! | |
| mac mode=0 | |
| current mac mode = 0 | |
| current dts led_source_num is 5 | |
| mdio DT exist! | |
| ssdk_plat_init start | |
| enable ess clk | |
| reset ok in probe! | |
| PHY ID is 0x4dd0b1 | |
| qca probe malibu phy driver succeeded! | |
| Dakota Chip version 0x1401 | |
| qca-ssdk module init succeeded! | |
| tun: Universal TUN/TAP device driver, 1.6 | |
| tun: (C) 1999-2004 Max Krasnyansky <[email protected]> | |
| NET: Registered protocol family 24 | |
| ********************************************************** | |
| * Driver :NSS GMAC Driver for RTL v(3.72a) | |
| * Version :1.0 | |
| * Copyright :Copyright (c) 2013-2016 The Linux Foundation. All rights reserved. | |
| ********************************************************** | |
| mdio bus 'mdio-gpio.0' get FAIL. | |
| l2tp_core: L2TP core driver, V2.0 | |
| l2tp_netlink: L2TP netlink interface | |
| qca-nss-drv.ko is loaded for symbol link | |
| dni-qos module init. | |
| bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) | |
| xt_time: kernel timezone is -0000 | |
| QCA Hy-Fi multicast installation successfully | |
| QCA Hy-Fi netfilter installation: OK | |
| l2tp_ppp: PPPoL2TP kernel driver, V2.0 | |
| edma module_init | |
| NET: Registered protocol family 27 | |
| PPPoL2TP kernel driver, V0.16.1 | |
| PPTP-GRE-v1.13 2007 (C) Delta Networks Inc. | |
| Ebtables v2.0 registered | |
| ip6_tables: (C) 2000-2006 Netfilter Core Team | |
| ctnetlink v0.93: registering with nfnetlink. | |
| fuse init (API version 7.22) | |
| ECM init | |
| ECM init complete | |
| Loading DNI-ENET driver | |
| sysinit: . | |
| sysinit: = switch init | |
| sysinit: . | |
| sysinit: insmod: can't read 'ufsd.ko': No such file or directory | |
| sysinit: sh: QCA9888/hw.2/otp.bin: unknown operand | |
| sysinit: mkdir: can't create directory '/tmp/mnt': File exists | |
| random: nonblocking pool is initialized | |
| sysinit: WPSPIN: 33598291 | |
| sysinit: sn:50M27457051E2 | |
| sysinit: SN: 50M27457051E2 | |
| sysinit: /dev/mtd: No such file or directory | |
| sysinit: lan mac: a0:40:a0:6a:c0:be | |
| sysinit: wlan 2g mac: a6:40:a0:6a:c0:be | |
| sysinit: wan mac: a0:40:a0:6a:c0:bf | |
| sysinit: wlan5g mac: a0:40:a0:6a:c0:c0 | |
| sysinit: wlan2nd5g mac: a0:40:a0:6a:c0:c1 | |
| sysinit: bt mac: a0:40:a0:6a:c0:c2 | |
| Saving Data... | |
| Done! | |
| sysinit: 377+0 records in | |
| sysinit: 377+0 records out | |
| sysinit: 12064 bytes (11.8KB) copied, 0.004338 seconds, 2.7MB/s | |
| sysinit: 377+0 records in | |
| sysinit: 377+0 records out | |
| sysinit: 12064 bytes (11.8KB) copied, 0.004071 seconds, 2.8MB/s | |
| sysinit: 377+0 records in | |
| sysinit: 377+0 records out | |
| sysinit: 12064 bytes (11.8KB) copied, 0.004238 seconds, 2.7MB/s | |
| sysinit: not need do overwrite lbd | |
| sysinit: /etc/rc.common: /etc/rc.d/S11init-gpio: line 23: syntax error: unexpected "}" | |
| sysinit: . | |
| sysinit: = network init | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| device eth1 entered promiscuous mode | |
| sysinit: init.enet: Default LAN MAC is : a0:40:a0:6a:c0:be | |
| sysinit: . | |
| sysinit: switch init | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: sh: 1: unknown operand | |
| sysinit: sh: 1: unknown operand | |
| opmode = normal | |
| device eth1 left promiscuous mode | |
| br0: port 1(eth1) entered disabled state | |
| device eth1 entered promiscuous mode | |
| device eth0 entered promiscuous mode | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: Illegal parameter(s) | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: killall: acld: no process killed | |
| sysinit: . | |
| sysinit: = net-lan init | |
| IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready | |
| br0: port 1(eth1) entered forwarding state | |
| br0: port 1(eth1) entered forwarding state | |
| sysinit: cat: can't open '/tmp/enable_telnet': No such file or directory | |
| sysinit: cat: can't open '/tmp/link_status_5g': No such file or directory | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: SSDK Init OK! | |
| sysinit: operate done. | |
| sysinit: mkdir: can't create directory '/dev/pts': File exists | |
| sysinit: mknod: /dev/ptmx: File exists | |
| sysinit: mknod: /dev/pts/0: Operation not permitted | |
| sysinit: mknod: /dev/pts/1: Operation not permitted | |
| sysinit: killall: utelnetd: no process killed | |
| sysinit: killall: telnetenable: no process killed | |
| sysinit: . | |
| sysinit: /etc/rc.common: line 90: /etc/init.d/net-wan: not found | |
| sysinit: sh: bad number | |
| sysinit: /etc/rc.common: line 90: detplc: not found | |
| sysinit: sh: bad number | |
| sysinit: Init wifison script | |
| sysinit: sh: bad number | |
| sysinit: sh: bad number | |
| Saving Data... | |
| Done! | |
| sysinit: /sbin/uci: Entry not found | |
| sysinit: /sbin/uci: Entry not found | |
| [wsplcd]WLAN interface ath0 is not ready | |
| sysinit: awk: /tmp/wifi_update/wireless.old: No such file or directory | |
| sysinit: /etc/rc.common: line 90: /etc/init.d/kcode: not found | |
| sysinit: cp: can't stat '/usr/config/shadow': No such file or directory | |
| sysinit: /usr/sbin/update_user: line 29: /bin/adduser: not found | |
| sysinit: sh: bad number | |
| sysinit: /www/cgi-bin/firewall_function.sh: line 66: /usr/sbin/net-wall: not found | |
| sysinit: traffic_meter start : sh: 1: unknown operand | |
| sysinit: . | |
| sysinit: restart the daemon telnetenable for Thin client !!! | |
| sysinit: /etc/rc.common: line 90: /sbin/ip_mac: not found | |
| sysinit: ifconfig: ppp0: error fetching interface information: Device not found | |
| [Orbi]***boot done*** | |
| sysinit: net.bridge.bridge-nf-call-custom = 1 | |
| sysinit: /etc/rc.common: eval: line 1: =: not found | |
| sysinit: /sbin/uci: Entry not found | |
| sysinit: /sbin/uci: Entry not found | |
| sysinit: No valid user found in /etc/passwd | |
| hyfi: Added interface eth1 | |
| hyfi: Bridge br0 is now attached | |
| sysinit: ath0 no private ioctls. | |
| sysinit: ath01 no private ioctls. | |
| sysinit: ath1 no private ioctls. | |
| qcawifi disable radio wifi0 | |
| sysinit: ath2 no private ioctls. | |
| sysinit: phy for wifi device wifi0 not found | |
| sysinit: wifi0(qcawifi): disable failed | |
| qcawifi disable radio wifi1 | |
| hyd: starting daemon | |
| sysinit: phy for wifi device wifi1 not found | |
| sysinit: wifi1(qcawifi): disable failed | |
| qcawifi disable radio wifi2 | |
| sysinit: phy for wifi device wifi2 not found | |
| sysinit: wifi2(qcawifi): disable failed | |
| sysinit: sh: bad number | |
| sysinit: whc (repacd): starting WHC auto-configuration | |
| sysinit: whc (repacd): Managed network: 0 | |
| sysinit: whc (repacd): Device type: RE | |
| sysinit: whc (repacd): starting in DNI mode | |
| sysinit: /etc/rc.common: line 90: /sbin/ping-netgear: not found | |
| sysinit: sysctl: error: 'dni_netfilter.enable_nat_management' is an unknown key | |
| sysinit: sysctl: error: 'dev.nss.ipv4cfg.ipv4_conn' is an unknown key | |
| sysinit: sysctl: error: 'dev.nss.ipv6cfg.ipv6_conn' is an unknown key | |
| sysinit: sysctl: error: 'dev.nss.general.redirect' is an unknown key | |
| sysinit: Init wifison monitor script | |
| sysinit: cat: can't open '/tmp/openvpn/cert_file_status': No such file or directory | |
| sysinit: sh: 1: unknown operand | |
| qcawifi: enable radio wifi0 | |
| sysinit: killall: proftpd: no process killed | |
| __mm_init_module | |
| sysinit: cat: can't open '/tmp/link_status_5g': No such file or directory | |
| ath_hal: 0.9.17.1 (AR9380, WRITE_EEPROM, 11D) | |
| ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved | |
| ath_dfs: Version 2.0.0 | |
| Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved | |
| ath_spectral: Version 2.0.0 | |
| Copyright (c) 2005-2009 Atheros Communications, Inc. All Rights Reserved | |
| SPECTRAL module built on Mar 9 2017 11:25:24 | |
| ath_tx99: Version 2.0 | |
| Copyright (c) 2010 Atheros Communications, Inc, All Rights Reserved | |
| ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved | |
| ol_ath_ahb_probe | |
| ol_ath_ahb_probe: io resource start: 0xa000000, mem=0xe3000000 | |
| *********** Dakota ************* | |
| __ol_ath_attach() Allocated scn dcdc04c0 | |
| ol_ath_ahb_configure: MSI addr: 0b006040, MSI base: 00000040 | |
| Wifi0 CPU frequency 250000000 | |
| ath9k a000000.wifi: ath DEBUG: sc=0xdd70dc00 | |
| ol_ath_ahb_configure : num_desired MSI set to 0 | |
| Using Legacy Interrupt | |
| Waiting for target init | |
| Done waiting | |
| nss is not enabled on this platform | |
| nss register id -1 offload mode enabled = 0 nss config 0 Target Type b | |
| CLOCK PLL skipped | |
| __ol_ath_attach: dev name wifi0 | |
| ol_ath_attach interface_id 0 | |
| ol_ath_attach() BMI inited. | |
| ol_ath_attach() BMI Get Target Info. | |
| Chip id: 0xb, chip version: 0x1000000 | |
| CE WAR Disabled | |
| NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0 | |
| ol_ath_attach() configure Target . | |
| Target Version is 1000000 | |
| Flash Download Address c0000 | |
| ol_transfer_bin_file: flash data file defined | |
| ol_transfer_bin_file[3536] Get Caldata for wifi0. | |
| __adf_os_fs_read[42], Open File /tmp/wifi0.caldata SUCCESS!! | |
| file system magic:16914836 | |
| super blocksize:4096 | |
| inode 836 | |
| file size:12064 | |
| qc98xx_verify_checksum: flash checksum passed: 0x89d7 | |
| ol_transfer_bin_file 3612: Download Flash data len 12064 | |
| Board extended Data download address: 0x0 | |
| Board data initialized | |
| ol_ath_download_firmware: Download OTP, flash download ADDRESS 0xc0000 | |
| Selecting OTP binary for CHIP Version 0 | |
| ath9k a000000.wifi: Firmware loaded from user helper succesfully | |
| ol_transfer_bin_file 3417: downloading file 0, Download data len 4352 | |
| First OTP send param 8000 | |
| ol_ath_download_firmware :First OTP download and Execute is good address:0x5000 return param 4660 | |
| ol_ath_download_firmware:##Board Id 20 , CHIP Id 0 | |
| ol_ath_download_firmware: BOARDDATA DOWNLOAD TO address 0xc0000 | |
| wifi0: Selecting board data file name boardData_1_0_IPQ4019_DK04_2G.bin | |
| ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=IPQ4019/hw.1/boardData_1_0_IPQ4019_DK04_2G.bin | |
| ath9k a000000.wifi: Firmware loaded from user helper succesfully | |
| ol_transfer_bin_file 3417: downloading file 3, Download data len 12064 | |
| Board extended Data download address: 0x0 | |
| ol_ath_download_firmware: Using 0x1234 for the remainder of init | |
| Selecting OTP binary for CHIP Version 0 | |
| ath9k a000000.wifi: Firmware loaded from user helper succesfully | |
| ol_transfer_bin_file 3417: downloading file 0, Download data len 4352 | |
| [Flash] : Ignore Module param | |
| Second otp download Param 10000 | |
| ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0 | |
| Mission mode: Firmware CHIP Version 0 | |
| ath9k a000000.wifi: Firmware loaded from user helper succesfully | |
| ol_swap_seg_alloc: Successfully allocated memory for SWAP size=262144 | |
| ath9k a000000.wifi: Firmware loaded from user helper succesfully | |
| Swap: bytes_left to copy: fw:16; dma_page:115117 | |
| Swap: wrong length read:0 | |
| ol_swap_wlan_memory_expansion: Swap total_bytes copied: 147027 Target address 417010 | |
| scn=dcdc04c0 target_write_addr=417010 seg_info=de042010 | |
| ol_transfer_swap_struct:Code swap structure successfully downloaded for bin type =2 | |
| bin_filename=IPQ4019/hw.1/athwlan.bin swap_filename=/lib/firmware/IPQ4019/hw.1/athwlan.codeswap.bin | |
| ol_transfer_bin_file: Downloading firmware file: IPQ4019/hw.1/athwlan.bin | |
| ath9k a000000.wifi: Firmware loaded from user helper succesfully | |
| ol_transfer_bin_file 3417: downloading file 1, Download data len 353444 | |
| ol_ath_attach() Download FW done. | |
| ol_ath_attach() HT Create . | |
| ol_ath_attach() HIF Claim. | |
| ol_ath_attach() BMI Done. | |
| ol_ath_attach 7548 host_enable 0 nss_nwifi_offload 0 | |
| ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko) | |
| OL_ACBKMinfree : 0 | |
| OL_ACBEMinfree : 0 | |
| OL_ACVIMinfree : 0 | |
| OL_ACVOMinfree : 0 | |
| ol_ath_attach() WMI attached. wmi_handle dcfd0000 | |
| CE_recv_buf_enqueue 877 Populate last entry 512 for CE 5 | |
| CE_recv_buf_enqueue 886 CE 5 wi 511 dest_ptr 0x9bdb2040 nbytes 0 recv_ctxt 0xdd6bd6c0 | |
| Startup Mode-0 set | |
| pdev attach (null) -1 | |
| <=== cfg max peer id 1056 ====> | |
| HTC Service:0x0300 ep:1 TX flow control disabled | |
| htt_peer_map_timer_init Enter pdev dbe38000 hrtimer dbe3c860 | |
| htt_alloc_peer_map_mem : Alloc Success : host q vaddr dec56000 paddr 9ec56000 | |
| htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts | |
| CE_pkt_dl_len_set CE 4 Pkt download length 64 | |
| ol_txrx_pdev_attach: 2500 tx desc's allocated ; range starts from dbac0000 | |
| HTC Service:0x0100 ep:2 TX flow control disabled | |
| wmi_service_ready_event_rx: WMI UNIFIED SERVICE READY event | |
| Firmware_Build_Number:7 | |
| host/RAM_fw Build Ver Mismatch: H:0x4, F:0x7 ! | |
| num_rf_chain:0x00000002 ht_cap_info:0x0000085b vht_cap_info:0x339959b2 vht_supp_mcs:0x0000fffa | |
| RES CFG Support wmi_service_bitmap 9778 | |
| Sending Ext resource cfg: HOST PLATFORM as 0 and fw_feature_bitmap as 50 to TGT | |
| ol_ath_service_ready_event: tt_support: 1 | |
| ol_ath_service_ready_event: periodic_chan_stats: 0 | |
| Peer Caching Enabled ; num_peers = 530, num_active_peers = 52 num_tids = 104, num_vdevs = 17 | |
| idx 1 req 2 num_units 1 num_unit_info 12 unit size 256 actual units 53 | |
| ol_ath_alloc_host_mem_chunk req_id 2 idx 0 num_units 53 unit_len 256, | |
| idx 2 req 3 num_units 1 num_unit_info 12 unit size 1024 actual units 53 | |
| ol_ath_alloc_host_mem_chunk req_id 3 idx 1 num_units 53 unit_len 1024, | |
| idx 3 req 4 num_units 1 num_unit_info 12 unit size 4096 actual units 53 | |
| ol_ath_alloc_host_mem_chunk req_id 4 idx 2 num_units 53 unit_len 4096, | |
| idx 0 req 1 num_units 0 num_unit_info 2 unit size 720 actual units 531 | |
| ol_ath_alloc_host_mem_chunk req_id 1 idx 3 num_units 531 unit_len 720, | |
| idx 4 req 6 num_units 35 num_unit_info 0 unit size 3072 actual units 35 | |
| ol_ath_alloc_host_mem_chunk req_id 6 idx 4 num_units 35 unit_len 3072, | |
| idx 5 req 7 num_units 1 num_unit_info 0 unit size 6144 actual units 1 | |
| ol_ath_alloc_host_mem_chunk req_id 7 idx 5 num_units 1 unit_len 6144, | |
| idx 6 req 5 num_units 0 num_unit_info 2 unit size 1876 actual units 531 | |
| ol_ath_alloc_host_mem_chunk req_id 5 idx 6 num_units 531 unit_len 1876, | |
| chunk 0 len 13568 requested ,ptr 0x9cfb0000 | |
| chunk 1 len 54272 requested ,ptr 0x9bab0000 | |
| chunk 2 len 217088 requested ,ptr 0x9bb40000 | |
| chunk 3 len 382320 requested ,ptr 0x9bb80000 | |
| chunk 4 len 107520 requested ,ptr 0x9bb20000 | |
| chunk 5 len 6144 requested ,ptr 0x9cfb4000 | |
| chunk 6 len 996156 requested ,ptr 0x9b400000 | |
| ol_ath_service_ready_event[3959] WAPI MBSSID 2 | |
| wmi_ready_event_rx: WMI UNIFIED READY event | |
| ol_ath_connect_htc() WMI is ready | |
| target uses HTT version 2.2; host uses 2.2 | |
| ol_ath_attach() connect HTC. | |
| bypasswmi : 0 | |
| ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0. | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x2) flags 0x2150 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x1) flags 0x140 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x20) flags 0xd0 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x40) flags 0x150 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x1000) flags 0x10100 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x8000) flags 0x20100 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x10000) flags 0x40100 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x20000) flags 0x100100 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x40000) flags 0x200100 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x80000) flags 0x400100 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x100000) flags 0x800100 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x200000) flags 0x4000100 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x400000) flags 0x8000100 | |
| OL Resmgr Init-ed | |
| ieee80211_bsteering_attach: Band steering initialized | |
| acfg_attach: 3146: Netlink socket created:dd70fc00 | |
| SPECTRAL : get_capability not registered | |
| HAL_CAP_PHYDIAG : Capable | |
| SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 237) | |
| SPECTRAL : get_capability not registered | |
| HAL_CAP_RADAR : Capable | |
| SPECTRAL : Need to fix the capablity check for SPECTRAL | |
| (spectral_attach : 242) | |
| SPECTRAL : get_capability not registered | |
| HAL_CAP_SPECTRAL_SCAN : Capable | |
| SPECTRAL : get_tsf64 not registered | |
| spectral_init_netlink 78 NULL SKB | |
| Green-AP : Green-AP : Attached | |
| Green-AP : Attached | |
| rate power table override is only supported for AR98XX | |
| ol_ath_smart_ant_attach: Firmware doest not support Smart Antenna. | |
| ol_ath_smart_ant_attach: Hardware doest not support Smart Antenna. | |
| the 1st socket creation has failed | |
| ieee80211com_init_netlink: 3474: Wifipos 2nd Netlink socket created:db538000 | |
| ol_if_dfs_attach: called; ptr=db541984, radar_info=dcc3bc48 | |
| dfs_attach: event log enabled by default | |
| ol_ath_attach() UMAC attach . | |
| BURSTING enabled by default | |
| ol_ath_attach: Set global_ic[1] ..ptr:bf95a884 | |
| osif_wrap_attach:434 osif wrap attached | |
| osif_wrap_devt_init:395 osif wrap dev table init done | |
| Wrap Attached: Wrap_com =dd406800 ic->ic_wrap_com=dd406800 &wrap_com->wc_devt=dd406800 | |
| __ol_ath_attach: needed_headroom reservation 60 | |
| ol_ath_thermal_mitigation_attach: -- | |
| ol_ath_ahb_probe | |
| ol_ath_ahb_probe: io resource start: 0xa800000, mem=0xe3400000 | |
| *********** Dakota ************* | |
| __ol_ath_attach() Allocated scn db6404c0 | |
| ol_ath_ahb_configure: MSI addr: 0b006040, MSI base: 00000050 | |
| Wifi1 CPU frequency 250000000 | |
| ath9k a800000.wifi: ath DEBUG: sc=0xdb539c00 | |
| ol_ath_ahb_configure : num_desired MSI set to 0 | |
| Using Legacy Interrupt | |
| Waiting for target init | |
| Done waiting | |
| nss is not enabled on this platform | |
| nss register id -1 offload mode enabled = 0 nss config 0 Target Type b | |
| CLOCK PLL skipped | |
| __ol_ath_attach: dev name wifi1 | |
| ol_ath_attach interface_id 1 | |
| ol_ath_attach() BMI inited. | |
| ol_ath_attach() BMI Get Target Info. | |
| Chip id: 0xb, chip version: 0x1000000 | |
| CE WAR Disabled | |
| NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0 | |
| ol_ath_attach() configure Target . | |
| Target Version is 1000000 | |
| Flash Download Address c0000 | |
| ol_transfer_bin_file: flash data file defined | |
| ol_transfer_bin_file[3536] Get Caldata for wifi1. | |
| __adf_os_fs_read[42], Open File /tmp/wifi1.caldata SUCCESS!! | |
| file system magic:16914836 | |
| super blocksize:4096 | |
| inode 2558 | |
| file size:12064 | |
| qc98xx_verify_checksum: flash checksum passed: 0x6f9c | |
| ol_transfer_bin_file 3612: Download Flash data len 12064 | |
| Board extended Data download address: 0x0 | |
| Board data initialized | |
| ol_ath_download_firmware: Download OTP, flash download ADDRESS 0xc0000 | |
| Selecting OTP binary for CHIP Version 0 | |
| ath9k a800000.wifi: Firmware loaded from user helper succesfully | |
| ol_transfer_bin_file 3417: downloading file 0, Download data len 4352 | |
| First OTP send param 8000 | |
| ol_ath_download_firmware :First OTP download and Execute is good address:0x5400 return param 4660 | |
| ol_ath_download_firmware:##Board Id 21 , CHIP Id 0 | |
| ol_ath_download_firmware: BOARDDATA DOWNLOAD TO address 0xc0000 | |
| wifi1: Selecting board data file name boardData_1_0_IPQ4019_DK04_5G.bin | |
| ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=IPQ4019/hw.1/boardData_1_0_IPQ4019_DK04_5G.bin | |
| ath9k a800000.wifi: Firmware loaded from user helper succesfully | |
| ol_transfer_bin_file 3417: downloading file 3, Download data len 12064 | |
| Board extended Data download address: 0x0 | |
| ol_ath_download_firmware: Using 0x1234 for the remainder of init | |
| Selecting OTP binary for CHIP Version 0 | |
| ath9k a800000.wifi: Firmware loaded from user helper succesfully | |
| ol_transfer_bin_file 3417: downloading file 0, Download data len 4352 | |
| [Flash] : Ignore Module param | |
| Second otp download Param 10000 | |
| ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0 | |
| Mission mode: Firmware CHIP Version 0 | |
| ath9k a800000.wifi: Firmware loaded from user helper succesfully | |
| ol_swap_seg_alloc: Successfully allocated memory for SWAP size=262144 | |
| ath9k a800000.wifi: Firmware loaded from user helper succesfully | |
| Swap: bytes_left to copy: fw:16; dma_page:115117 | |
| Swap: wrong length read:0 | |
| ol_swap_wlan_memory_expansion: Swap total_bytes copied: 147027 Target address 417010 | |
| scn=db6404c0 target_write_addr=417010 seg_info=deadc710 | |
| ol_transfer_swap_struct:Code swap structure successfully downloaded for bin type =2 | |
| bin_filename=IPQ4019/hw.1/athwlan.bin swap_filename=/lib/firmware/IPQ4019/hw.1/athwlan.codeswap.bin | |
| ol_transfer_bin_file: Downloading firmware file: IPQ4019/hw.1/athwlan.bin | |
| ath9k a800000.wifi: Firmware loaded from user helper succesfully | |
| ol_transfer_bin_file 3417: downloading file 1, Download data len 353444 | |
| ol_ath_attach() Download FW done. | |
| ol_ath_attach() HT Create . | |
| ol_ath_attach() HIF Claim. | |
| ol_ath_attach() BMI Done. | |
| ol_ath_attach 7548 host_enable 0 nss_nwifi_offload 0 | |
| ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko) | |
| OL_ACBKMinfree : 0 | |
| OL_ACBEMinfree : 0 | |
| OL_ACVIMinfree : 0 | |
| OL_ACVOMinfree : 0 | |
| ol_ath_attach() WMI attached. wmi_handle db720000 | |
| CE_recv_buf_enqueue 877 Populate last entry 512 for CE 5 | |
| CE_recv_buf_enqueue 886 CE 5 wi 511 dest_ptr 0x9b388040 nbytes 0 recv_ctxt 0xddb25900 | |
| Startup Mode-0 set | |
| pdev attach (null) -1 | |
| <=== cfg max peer id 1056 ====> | |
| HTC Service:0x0300 ep:1 TX flow control disabled | |
| htt_peer_map_timer_init Enter pdev dac08000 hrtimer dac0c860 | |
| htt_alloc_peer_map_mem : Alloc Success : host q vaddr dd444000 paddr 9d444000 | |
| htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts | |
| CE_pkt_dl_len_set CE 4 Pkt download length 64 | |
| ol_txrx_pdev_attach: 2500 tx desc's allocated ; range starts from da880000 | |
| HTC Service:0x0100 ep:2 TX flow control disabled | |
| wmi_service_ready_event_rx: WMI UNIFIED SERVICE READY event | |
| Firmware_Build_Number:7 | |
| host/RAM_fw Build Ver Mismatch: H:0x4, F:0x7 ! | |
| num_rf_chain:0x00000002 ht_cap_info:0x0000085b vht_cap_info:0x339959b2 vht_supp_mcs:0x0000fffa | |
| RES CFG Support wmi_service_bitmap 9778 | |
| Sending Ext resource cfg: HOST PLATFORM as 0 and fw_feature_bitmap as 50 to TGT | |
| ol_ath_service_ready_event: tt_support: 1 | |
| ol_ath_service_ready_event: periodic_chan_stats: 0 | |
| Peer Caching Enabled ; num_peers = 530, num_active_peers = 52 num_tids = 104, num_vdevs = 17 | |
| idx 1 req 2 num_units 1 num_unit_info 12 unit size 256 actual units 53 | |
| ol_ath_alloc_host_mem_chunk req_id 2 idx 0 num_units 53 unit_len 256, | |
| idx 2 req 3 num_units 1 num_unit_info 12 unit size 1024 actual units 53 | |
| ol_ath_alloc_host_mem_chunk req_id 3 idx 1 num_units 53 unit_len 1024, | |
| idx 3 req 4 num_units 1 num_unit_info 12 unit size 4096 actual units 53 | |
| ol_ath_alloc_host_mem_chunk req_id 4 idx 2 num_units 53 unit_len 4096, | |
| idx 0 req 1 num_units 0 num_unit_info 2 unit size 720 actual units 531 | |
| ol_ath_alloc_host_mem_chunk req_id 1 idx 3 num_units 531 unit_len 720, | |
| idx 4 req 6 num_units 35 num_unit_info 0 unit size 3072 actual units 35 | |
| ol_ath_alloc_host_mem_chunk req_id 6 idx 4 num_units 35 unit_len 3072, | |
| idx 5 req 7 num_units 1 num_unit_info 0 unit size 6144 actual units 1 | |
| ol_ath_alloc_host_mem_chunk req_id 7 idx 5 num_units 1 unit_len 6144, | |
| idx 6 req 5 num_units 0 num_unit_info 2 unit size 1876 actual units 531 | |
| ol_ath_alloc_host_mem_chunk req_id 5 idx 6 num_units 531 unit_len 1876, | |
| chunk 0 len 13568 requested ,ptr 0x9cd38000 | |
| chunk 1 len 54272 requested ,ptr 0x9a8e0000 | |
| chunk 2 len 217088 requested ,ptr 0x9a900000 | |
| chunk 3 len 382320 requested ,ptr 0x9a980000 | |
| chunk 4 len 107520 requested ,ptr 0x9a940000 | |
| chunk 5 len 6144 requested ,ptr 0x9cfc2000 | |
| chunk 6 len 996156 requested ,ptr 0x9aa00000 | |
| ol_ath_service_ready_event[3959] WAPI MBSSID 2 | |
| wmi_ready_event_rx: WMI UNIFIED READY event | |
| ol_ath_connect_htc() WMI is ready | |
| target uses HTT version 2.2; host uses 2.2 | |
| ol_ath_attach() connect HTC. | |
| bypasswmi : 0 | |
| ol_ath_attach: low_5ghz: 5490 high_5gh: 5850 | |
| ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0. | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080 | |
| Add VHT80 channel: 5210 | |
| Add VHT80 channel: 5290 | |
| Add VHT80 channel: 5530 | |
| Add VHT80 channel: 5610 | |
| Add VHT80 channel: 5690 | |
| Add VHT80 channel: 5775 | |
| Skipping VHT80 channel 5825 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x200000) flags 0x4000100 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x400000) flags 0x8000100 | |
| OL Resmgr Init-ed | |
| ieee80211_bsteering_attach: Band steering initialized | |
| acfg_attach: Offload using existing sock dd70fc00 | |
| SPECTRAL : get_capability not registered | |
| HAL_CAP_PHYDIAG : Capable | |
| SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 237) | |
| SPECTRAL : get_capability not registered | |
| HAL_CAP_RADAR : Capable | |
| SPECTRAL : Need to fix the capablity check for SPECTRAL | |
| (spectral_attach : 242) | |
| SPECTRAL : get_capability not registered | |
| HAL_CAP_SPECTRAL_SCAN : Capable | |
| SPECTRAL : get_tsf64 not registered | |
| spectral_init_netlink 78 NULL SKB | |
| Green-AP : Green-AP : Attached | |
| Green-AP : Attached | |
| rate power table override is only supported for AR98XX | |
| ol_ath_smart_ant_attach: Firmware doest not support Smart Antenna. | |
| ol_ath_smart_ant_attach: Hardware doest not support Smart Antenna. | |
| ieee80211com_init_netlink: Socket already created db538000 | |
| ol_if_dfs_attach: called; ptr=db6c1984, radar_info=dcc3bc48 | |
| dfs_attach: event log enabled by default | |
| ol_ath_attach() UMAC attach . | |
| BURSTING enabled by default | |
| ol_ath_attach: Set global_ic[2] ..ptr:bf95a884 | |
| osif_wrap_attach:434 osif wrap attached | |
| osif_wrap_devt_init:395 osif wrap dev table init done | |
| Wrap Attached: Wrap_com =dd403400 ic->ic_wrap_com=dd403400 &wrap_com->wc_devt=dd403400 | |
| __ol_ath_attach: needed_headroom reservation 60 | |
| ol_ath_thermal_mitigation_attach: -- | |
| ath_pci: (Atheros/multi-bss) | |
| ol_ath_pci_probe: PCI device id 0056 :0056 | |
| PCI: enabling device 0000:00:00.0 (0144 -> 0147) | |
| PCI: enabling device 0000:01:00.0 (0140 -> 0142) | |
| *********** Besra ************* | |
| __ol_ath_attach() Allocated scn dabc04c0 | |
| ath_pci 0000:01:00.0: ath DEBUG: sc=0xdeb9dc00 | |
| ol_ath_pci_configure : num_desired MSI set to 0 | |
| Using PCI Legacy Interrupt | |
| chip_id 0xc chip_revision 0x0 | |
| nss is not enabled on this platform | |
| nss register id -1 offload mode enabled = 0 nss config 0 Target Type c | |
| CLOCK PLL skipped | |
| HIF_PCIDeviceProbed: setting the target pll frac ffffffff intval ffffffff | |
| HIF_PCIDeviceProbed: no frac provided, skipping pre-configuring PLL | |
| __ol_ath_attach: dev name wifi2 | |
| ol_ath_attach interface_id 2 | |
| ol_ath_attach() BMI inited. | |
| ol_ath_attach() BMI Get Target Info. | |
| Chip id: 0xc, chip version: 0x1000000 | |
| CE WAR Disabled | |
| NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0 | |
| ol_ath_attach() configure Target . | |
| Target Version is 1000000 | |
| Flash Download Address c0000 | |
| ol_transfer_bin_file: flash data file defined | |
| ol_transfer_bin_file[3536] Get Caldata for wifi2. | |
| __adf_os_fs_read[42], Open File /tmp/wifi2.caldata SUCCESS!! | |
| file system magic:16914836 | |
| super blocksize:4096 | |
| inode 2565 | |
| file size:12064 | |
| qc98xx_verify_checksum: flash checksum passed: 0x3946 | |
| ol_transfer_bin_file 3612: Download Flash data len 12064 | |
| Board extended Data download address: 0x0 | |
| Board data initialized | |
| ol_ath_download_firmware: Download OTP, flash download ADDRESS 0xc0000 | |
| Selecting OTP binary for CHIP Version 0 | |
| ath_pci 0000:01:00.0: Firmware loaded from user helper succesfully | |
| ol_transfer_bin_file 3417: downloading file 0, Download data len 8964 | |
| First OTP send param 8000 | |
| AUTO FW CHECK: power cycle | |
| ol_ath_download_firmware :First OTP download and Execute is good address:0x6000 return param 4660 | |
| ol_ath_download_firmware:##Board Id 24 , CHIP Id 0 | |
| ol_ath_download_firmware: BOARDDATA DOWNLOAD TO address 0xc0000 | |
| wifi2: Selecting board data file name boardData_2_0_QCA9888_5G_YA105.bin | |
| ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=QCA9888/hw.2/boardData_2_0_QCA9888_5G_YA105.bin | |
| ath_pci 0000:01:00.0: Firmware loaded from user helper succesfully | |
| ol_transfer_bin_file 3417: downloading file 3, Download data len 12064 | |
| Board extended Data download address: 0x0 | |
| ol_ath_download_firmware: Using 0x1234 for the remainder of init | |
| Selecting OTP binary for CHIP Version 0 | |
| ath_pci 0000:01:00.0: Firmware loaded from user helper succesfully | |
| ol_transfer_bin_file 3417: downloading file 0, Download data len 8964 | |
| Switching to Tx Mode-1 Threshold 280 | |
| [Flash] : Ignore Module param | |
| Second otp download Param 10000 | |
| ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0 | |
| Mission mode: Firmware CHIP Version 0 | |
| ath_pci 0000:01:00.0: Firmware loaded from user helper succesfully | |
| ol_swap_seg_alloc: Successfully allocated memory for SWAP size=262144 | |
| ath_pci 0000:01:00.0: Firmware loaded from user helper succesfully | |
| Swap: bytes_left to copy: fw:16; dma_page:61741 | |
| Swap: wrong length read:0 | |
| ol_swap_wlan_memory_expansion: Swap total_bytes copied: 200403 Target address 419510 | |
| FW checking ... | |
| scn=dabc04c0 target_write_addr=419510 seg_info=de085610 | |
| ol_transfer_swap_struct:Code swap structure successfully downloaded for bin type =2 | |
| bin_filename=QCA9888/hw.2/athwlan.bin swap_filename=/lib/firmware/QCA9888/hw.2/athwlan.codeswap.bin | |
| week_day == 1 | |
| ol_transfer_bin_file: Downloading firmware file: QCA9888/hw.2/athwlan.bin | |
| count time:0 | |
| ath_pci 0000:01:00.0: Firmware loaded from user helper succesfully | |
| ol_transfer_bin_file 3417: downloading file 1, Download data len 354248 | |
| sysinit: ath1 No such device | |
| sysinit: ath01 No such device | |
| ol_ath_attach() Download FW done. | |
| ol_ath_attach() HT Create . | |
| ol_ath_attach() HIF Claim. | |
| ol_ath_attach() BMI Done. | |
| ol_ath_attach 7548 host_enable 0 nss_nwifi_offload 0 | |
| ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko) | |
| OL_ACBKMinfree : 0 | |
| OL_ACBEMinfree : 0 | |
| OL_ACVIMinfree : 0 | |
| OL_ACVOMinfree : 0 | |
| ol_ath_attach() WMI attached. wmi_handle da4e0000 | |
| CE_recv_buf_enqueue 877 Populate last entry 512 for CE 5 | |
| CE_recv_buf_enqueue 886 CE 5 wi 511 dest_ptr 0x99d36040 nbytes 0 recv_ctxt 0xda497780 | |
| Switching to Tx Mode-1 Threshold 280 | |
| Startup Mode-0 set | |
| pdev attach (null) -1 | |
| <=== cfg max peer id 1056 ====> | |
| HTC Service:0x0300 ep:1 TX flow control disabled | |
| htt_peer_map_timer_init Enter pdev d9db8000 hrtimer d9dbc860 | |
| htt_alloc_peer_map_mem : Alloc Success : host q vaddr dbec6000 paddr 9bec6000 | |
| htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts | |
| CE_pkt_dl_len_set CE 4 Pkt download length 64 | |
| ol_txrx_pdev_attach: 2500 tx desc's allocated ; range starts from d9a40000 | |
| HTC Service:0x0100 ep:2 TX flow control disabled | |
| wmi_service_ready_event_rx: WMI UNIFIED SERVICE READY event | |
| Firmware_Build_Number:7 | |
| host/RAM_fw Build Ver Mismatch: H:0x4, F:0x7 ! | |
| num_rf_chain:0x00000002 ht_cap_info:0x0000085b vht_cap_info:0x339979f2 vht_supp_mcs:0x0000fffa | |
| RES CFG Support wmi_service_bitmap 9778 | |
| Sending Ext resource cfg: HOST PLATFORM as 0 and fw_feature_bitmap as 50 to TGT | |
| ol_ath_service_ready_event: tt_support: 1 | |
| ol_ath_service_ready_event: periodic_chan_stats: 0 | |
| Peer Caching Enabled ; num_peers = 530, num_active_peers = 52 num_tids = 104, num_vdevs = 17 | |
| idx 1 req 2 num_units 1 num_unit_info 12 unit size 256 actual units 53 | |
| ol_ath_alloc_host_mem_chunk req_id 2 idx 0 num_units 53 unit_len 256, | |
| idx 2 req 3 num_units 1 num_unit_info 12 unit size 1024 actual units 53 | |
| ol_ath_alloc_host_mem_chunk req_id 3 idx 1 num_units 53 unit_len 1024, | |
| idx 3 req 4 num_units 1 num_unit_info 12 unit size 4096 actual units 53 | |
| ol_ath_alloc_host_mem_chunk req_id 4 idx 2 num_units 53 unit_len 4096, | |
| idx 0 req 1 num_units 0 num_unit_info 2 unit size 872 actual units 531 | |
| ol_ath_alloc_host_mem_chunk req_id 1 idx 3 num_units 531 unit_len 872, | |
| idx 4 req 5 num_units 0 num_unit_info 2 unit size 1892 actual units 531 | |
| ol_ath_alloc_host_mem_chunk req_id 5 idx 4 num_units 531 unit_len 1892, | |
| chunk 0 len 13568 requested ,ptr 0x9a404000 | |
| chunk 1 len 54272 requested ,ptr 0x99a30000 | |
| chunk 2 len 217088 requested ,ptr 0x99ac0000 | |
| chunk 3 len 463032 requested ,ptr 0x99b00000 | |
| chunk 4 len 1004652 requested ,ptr 0x99400000 | |
| ol_ath_service_ready_event[3959] WAPI MBSSID 2 | |
| wmi_ready_event_rx: WMI UNIFIED READY event | |
| ol_ath_connect_htc() WMI is ready | |
| target uses HTT version 2.2; host uses 2.2 | |
| ol_ath_attach() connect HTC. | |
| bypasswmi : 0 | |
| ol_ath_attach: low_5ghz: 5150 high_5gh: 5330 | |
| ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0. | |
| ol_regdmn_init_channels: !avail mode 0x7f9001 (0x2) flags 0x2150 | |
| ol_regdmn_init_channels: !avail mode 0x7f9001 (0x4) flags 0xa0 | |
| ol_regdmn_init_channels: !avail mode 0x7f9001 (0x8) flags 0xc0 | |
| ol_regdmn_init_channels: !avail mode 0x7f9001 (0x20) flags 0xd0 | |
| ol_regdmn_init_channels: !avail mode 0x7f9001 (0x40) flags 0x150 | |
| ol_regdmn_init_channels: !avail mode 0x7f9001 (0x800) flags 0x10080 | |
| ol_regdmn_init_channels: !avail mode 0x7f9001 (0x2000) flags 0x20080 | |
| ol_regdmn_init_channels: !avail mode 0x7f9001 (0x4000) flags 0x40080 | |
| Add VHT80 channel: 5210 | |
| Add VHT80 channel: 5290 | |
| Add VHT80 channel: 5530 | |
| Add VHT80 channel: 5610 | |
| Add VHT80 channel: 5690 | |
| Add VHT80 channel: 5775 | |
| OL Resmgr Init-ed | |
| ieee80211_bsteering_attach: Band steering initialized | |
| acfg_attach: Offload using existing sock dd70fc00 | |
| SPECTRAL : get_capability not registered | |
| HAL_CAP_PHYDIAG : Capable | |
| SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 237) | |
| SPECTRAL : get_capability not registered | |
| HAL_CAP_RADAR : Capable | |
| SPECTRAL : Need to fix the capablity check for SPECTRAL | |
| (spectral_attach : 242) | |
| SPECTRAL : get_capability not registered | |
| HAL_CAP_SPECTRAL_SCAN : Capable | |
| SPECTRAL : get_tsf64 not registered | |
| spectral_init_netlink 78 NULL SKB | |
| Green-AP : Green-AP : Attached | |
| Green-AP : Attached | |
| rate power table override is only supported for AR98XX | |
| ol_ath_smart_ant_attach: Firmware doest not support Smart Antenna. | |
| ol_ath_smart_ant_attach: Hardware doest not support Smart Antenna. | |
| ieee80211com_init_netlink: Socket already created db538000 | |
| ol_if_dfs_attach: called; ptr=d9aa9984, radar_info=dcc3bc08 | |
| dfs_attach: event log enabled by default | |
| ol_ath_attach() UMAC attach . | |
| BURSTING enabled by default | |
| ol_ath_attach: Set global_ic[3] ..ptr:bf95a884 | |
| osif_wrap_attach:434 osif wrap attached | |
| osif_wrap_devt_init:395 osif wrap dev table init done | |
| Wrap Attached: Wrap_com =dd416800 ic->ic_wrap_com=dd416800 &wrap_com->wc_devt=dd416800 | |
| __ol_ath_attach: needed_headroom reservation 60 | |
| ol_ath_thermal_mitigation_attach: -- | |
| pktlog_init: Initializing Pktlog for AR900B, pktlog_hdr_size = 16 | |
| pktlog_init: Initializing Pktlog for AR900B, pktlog_hdr_size = 16 | |
| pktlog_init: Initializing Pktlog for AR900B, pktlog_hdr_size = 16 | |
| __sa_init_module | |
| isCountryCodeValid: EEPROM regdomain 0x0 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x2) flags 0x2150 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x1) flags 0x140 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x20) flags 0xd0 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x40) flags 0x150 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x1000) flags 0x10100 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x8000) flags 0x20100 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x10000) flags 0x40100 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x20000) flags 0x100100 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x40000) flags 0x200100 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x80000) flags 0x400100 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x100000) flags 0x800100 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x200000) flags 0x4000100 | |
| ol_regdmn_init_channels: !avail mode 0x680c (0x400000) flags 0x8000100 | |
| set TXBF_SND_PERIOD: value 100 wmi_status 0 | |
| wmi_unified_vdev_create_send: ID = 0 Type = 1, Subtype = 0 VAP Addr = a6:40:a0:6a:c0:be: | |
| ieee80211_mbo_vattach:MBO Initialized | |
| In ieee80211_vap_setup, line:394, wifi-pos enabled vap:0 | |
| __ieee80211_smart_ant_init: Smart Antenna is not supported | |
| Enabling TX checksum bit for the vap ath0 features 4000 | |
| Enabling SG bit for the vap ath0 features 4000 | |
| Enabling SG bit for the vap ath0 features 4000 | |
| Enabling TSO bit for the vap ath0 features 4000 | |
| Enabling LRO bit for the vap ath0 features 4000 | |
| VAP device ath0 created osifp: (db5eacc0) os_if: (da4d4000) | |
| siwfreq | |
| Set freq vap 0 stop send + da4d4000 | |
| Set freq vap 0 stop send -da4d4000 | |
| Set wait done --da4d4000 | |
| sysinit: Invalid command : dni_vlan_pri | |
| ME Pool succesfully initialized vaddr - dc280000 paddr - 0 | |
| num_elems = 1424 buf_size - 64 pool_size = 102528 | |
| Enable MCAST_TO_UCAST | |
| WARNING: Fragmentation with HT mode NOT ALLOWED!! | |
| sysinit: Error for wireless request "Set Fragmentation Threshold" (8B24) : | |
| sysinit: SET failed on device ath0 ; Invalid argument. | |
| sysinit: Interface doesn't accept private ioctl... | |
| sysinit: stafwd (8BE0): Invalid argument | |
| DES SSID SET=on | |
| DES SSID SET=ORBI19 | |
| su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1 | |
| su bfee 1 mu bfee 0 su bfer 0 mu bfer 1 impl bf 0 sounding dim 1 | |
| su bfee 1 mu bfee 0 su bfer 0 mu bfer 0 impl bf 0 sounding dim 1 | |
| su bfee 0 mu bfee 0 su bfer 0 mu bfer 0 impl bf 0 sounding dim 1 | |
| su bfee 0 mu bfee 0 su bfer 0 mu bfer 0 impl bf 0 sounding dim 1 | |
| sysinit: Interface doesn't accept private ioctl... | |
| sysinit: vhtmubfee (8BE0): Invalid argument | |
| device ath0 entered promiscuous mode | |
| hyfi: Added interface ath0 | |
| ieee80211_ioctl_siwmode: imr.ifm_active=131712, new mode=3, valid=1 | |
| DEVICE IS DOWN ifname=ath0 | |
| DEVICE IS DOWN ifname=ath0 | |
| br0: port 2(ath0) entered forwarding state | |
| br0: port 2(ath0) entered forwarding state | |
| sysinit: OK | |
| sysinit: /sbin/wlan: eval: line 15: scan_interfaces: not found | |
| sysinit: /sbin/wlan: eval: line 15: setup_interface: not found | |
| osif_vap_init: Scan in progress.. Cancelling it. vap: 0xda4d4000 | |
| osif_vap_init: Scan in progress.. Cancelling it. vap: 0xda4d4000 | |
| sysinit: sh: 1: unknown operand | |
| sysinit: sh: 0: unknown operand | |
| sysinit: Invalid command : dyn_bw_rts | |
| wmi_unified_vdev_create_send: ID = 1 Type = 2, Subtype = 0 VAP Addr = aa:40:a0:6a:c0:be: | |
| wmi_unified_set_psmode:set psmode=1 | |
| In ieee80211_vap_setup, line:398, wifi-pos disabled vap:1 | |
| __ieee80211_smart_ant_init: Smart Antenna is not supported | |
| Enabling TX checksum bit for the vap ath01 features 4000 | |
| Enabling SG bit for the vap ath01 features 4000 | |
| Enabling SG bit for the vap ath01 features 4000 | |
| Enabling TSO bit for the vap ath01 features 4000 | |
| Enabling LRO bit for the vap ath01 features 4000 | |
| VAP device ath01 created osifp: (ddbefcc0) os_if: (da430000) | |
| siwfreq | |
| sysinit: sh: bad number | |
| sysinit: sh: bad number | |
| wmi_unified_set_psmode:set psmode=0 | |
| wmi_unified_set_psmode:set psmode=0 | |
| sysinit: Invalid command : dni_vlan_pri | |
| sysinit: Interface doesn't accept private ioctl... | |
| sysinit: uapsd (8BE0): Invalid argument | |
| sysinit: Invalid command : vap_ind | |
| DES SSID SET=on | |
| DES SSID SET=NETGEAR_ORBI_hidden25 | |
| su bfee 1 mu bfee 1 su bfer 1 mu bfer 0 impl bf 0 sounding dim 1 | |
| su bfee 1 mu bfee 1 su bfer 0 mu bfer 0 impl bf 0 sounding dim 1 | |
| su bfee 0 mu bfee 1 su bfer 0 mu bfer 0 impl bf 0 sounding dim 1 | |
| su bfee 0 mu bfee 0 su bfer 0 mu bfer 0 impl bf 0 sounding dim 1 | |
| sysinit: Interface doesn't accept private ioctl... | |
| sysinit: vhtmubfer (8BE0): Invalid argument | |
| su bfee 0 mu bfee 0 su bfer 0 mu bfer 0 impl bf 0 sounding dim 1 | |
| device ath01 entered promiscuous mode | |
| hyfi: Added interface ath01 | |
| sysinit: Successfully initialized wpa_supplicant | |
| ieee80211_ucfg_getparam : parameter 0x284 not supported | |
| br0: port 3(ath01) entered forwarding state | |
| br0: port 3(ath01) entered forwarding state | |
| Switching to Tx Mode-1 Threshold 280 | |
| hyfi: Already attached to bridge br0 | |
| sysinit: ath1 No such device | |
| sysinit: 'INTERFACE_ADD ath01 /var/run/wpa_supplicant-ath01.conf athr /var/run/wpa_supplicant-br0: port 3(ath01) entered disabled state | |
| ath01 br0 ' command timed out. | |
| sysinit: cat: can't open '/tmp/link_status_5g': No such file or directory | |
| sysinit: /sbin/wlan: eval: line 15: scan_interfaces: not found | |
| sysinit: /sbin/wlan: eval: line 15: setup_interface: not found | |
| sysinit: sh: 1: unknown operand | |
| sysinit: sh: 0: unknown operand | |
| hyd: starting daemon | |
| OL vap_start + | |
| wmi_unified_vdev_start_send for vap 0 (dcfd0000) | |
| OL vap_start - | |
| sysinit: Invalid command : dyn_bw_rts | |
| ol_vdev_start_resp_ev for vap 0 (dcfd0000) | |
| su bfee 0 mu bfee 0 su bfer 0 mu bfer 0 impl bf 0 sounding dim 1 | |
| wmi_unified_vdev_up_send for vap 0 (dcfd0000) | |
| __ieee80211_smart_ant_init: Smart Antenna is not supported | |
| sysinit: sh: can't kill pid 5467: No such process | |
| sysinit: killall: led-extender: no process killed | |
| qcawifi: enable radio wifi1 | |
| isCountryCodeValid: EEPROM regdomain 0x0 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080 | |
| Add VHT80 channel: 5210 | |
| Add VHT80 channel: 5290 | |
| Add VHT80 channel: 5530 | |
| Add VHT80 channel: 5610 | |
| Add VHT80 channel: 5690 | |
| Add VHT80 channel: 5775 | |
| Skipping VHT80 channel 5825 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x200000) flags 0x4000100 | |
| ol_regdmn_init_channels: !avail mode 0x1f9001 (0x400000) flags 0x8000100 | |
| set TXBF_SND_PERIOD: value 100 wmi_status 0 | |
| wmi_unified_vdev_create_send: ID = 0 Type = 2, Subtype = 0 VAP Addr = a0:40:a0:6a:c0:c0: | |
| wmi_unified_set_psmode:set psmode=1 | |
| In ieee80211_vap_setup, line:394, wifi-pos enabled vap:0 | |
| __ieee80211_smart_ant_init: Smart Antenna is not supported | |
| Enabling TX checksum bit for the vap ath1 features 4000 | |
| Enabling SG bit for the vap ath1 features 4000 | |
| Enabling SG bit for the vap ath1 features 4000 | |
| Enabling TSO bit for the vap ath1 features 4000 | |
| Enabling LRO bit for the vap ath1 features 4000 | |
| VAP device ath1 created osifp: (db5ed4c0) os_if: (d90ec000) | |
| siwfreq | |
| sysinit: sh: bad number | |
| sysinit: sh: bad number | |
| wmi_unified_set_psmode:set psmode=0 | |
| wmi_unified_set_psmode:set psmode=0 | |
| sysinit: Invalid command : dni_vlan_pri | |
| sysinit: Interface doesn't accept private ioctl... | |
| sysinit: uapsd (8BE0): Invalid argument | |
| sysinit: Invalid command : vap_ind | |
| DES SSID SET=on | |
| DES SSID SET=NETGEAR_ORBI_hidden25 | |
| su bfee 1 mu bfee 1 su bfer 1 mu bfer 0 impl bf 0 sounding dim 1 | |
| su bfee 1 mu bfee 1 su bfer 0 mu bfer 0 impl bf 0 sounding dim 1 | |
| su bfee 0 mu bfee 1 su bfer 0 mu bfer 0 impl bf 0 sounding dim 1 | |
| su bfee 0 mu bfee 0 su bfer 0 mu bfer 0 impl bf 0 sounding dim 1 | |
| sysinit: Interface doesn't accept private ioctl... | |
| sysinit: vhtmubfer (8BE0): Invalid argument | |
| su bfee 0 mu bfee 0 su bfer 0 mu bfer 0 impl bf 0 sounding dim 1 | |
| su bfee 0 mu bfee 0 su bfer 0 mu bfer 0 impl bf 0 sounding dim 1 | |
| su bfee 1 mu bfee 0 su bfer 0 mu bfer 0 impl bf 0 sounding dim 1 | |
| su bfee 1 mu bfee 1 su bfer 0 mu bfer 0 impl bf 0 sounding dim 1 | |
| su bfee 1 mu bfee 1 su bfer 1 mu bfer 0 impl bf 0 sounding dim 1 | |
| su bfee 1 mu bfee 1 su bfer 1 mu bfer 0 impl bf 0 sounding dim 1 | |
| sysinit: Interface doesn't accept private ioctl... | |
| sysinit: vhtmubfer (8BE0): Invalid argument | |
| device ath1 entered promiscuous mode | |
| hyfi: Added interface ath1 | |
| ieee80211_ucfg_getparam : parameter 0x284 not supported | |
| br0: port 4(ath1) entered forwarding state | |
| br0: port 4(ath1) entered forwarding state | |
| br0: port 4(ath1) entered disabled state | |
| sysinit: OK | |
| sysinit: /sbin/wlan: eval: line 15: scan_interfaces: not found | |
| sysinit: /sbin/wlan: eval: line 15: setup_interface: not found | |
| sysinit: wlanconfig: unable to get station information | |
| sysinit: Invalid command : dyn_bw_rts | |
| sysinit: ifconfig: ath2: error fetching interface information: Device not found | |
| sysinit: sh: can't kill pid 5767: No such process | |
| sysinit: killall: led-extender-5G: no process killed | |
| qcawifi: enable radio wifi2 | |
| isCountryCodeValid: EEPROM regdomain 0x0 | |
| ol_regdmn_init_channels: !avail mode 0x7f9001 (0x2) flags 0x2150 | |
| ol_regdmn_init_channels: !avail mode 0x7f9001 (0x4) flags 0xa0 | |
| ol_regdmn_init_channels: !avail mode 0x7f9001 (0x8) flags 0xc0 | |
| ol_regdmn_init_channels: !avail mode 0x7f9001 (0x20) flags 0xd0 | |
| ol_regdmn_init_channels: !avail mode 0x7f9001 (0x40) flags 0x150 | |
| ol_regdmn_init_channels: !avail mode 0x7f9001 (0x800) flags 0x10080 | |
| ol_regdmn_init_channels: !avail mode 0x7f9001 (0x2000) flags 0x20080 | |
| ol_regdmn_init_channels: !avail mode 0x7f9001 (0x4000) flags 0x40080 | |
| Add VHT80 channel: 5210 | |
| Add VHT80 channel: 5290 | |
| Add VHT80 channel: 5530 | |
| Add VHT80 channel: 5610 | |
| Add VHT80 channel: 5690 | |
| Add VHT80 channel: 5775 | |
| set TXBF_SND_PERIOD: value 100 wmi_status 0 | |
| wmi_unified_vdev_create_send: ID = 0 Type = 1, Subtype = 0 VAP Addr = a0:40:a0:6a:c0:c1: | |
| ieee80211_mbo_vattach:MBO Initialized | |
| In ieee80211_vap_setup, line:394, wifi-pos enabled vap:0 | |
| __ieee80211_smart_ant_init: Smart Antenna is not supported | |
| Enabling TX checksum bit for the vap ath2 features 4000 | |
| Enabling SG bit for the vap ath2 features 4000 | |
| Enabling SG bit for the vap ath2 features 4000 | |
| Enabling TSO bit for the vap ath2 features 4000 | |
| Enabling LRO bit for the vap ath2 features 4000 | |
| VAP device ath2 created osifp: (ddbec4c0) os_if: (dc278000) | |
| siwfreq | |
| Set freq vap 0 stop send + dc278000 | |
| Set freq vap 0 stop send -dc278000 | |
| Set wait done --dc278000 | |
| sysinit: Invalid command : dni_vlan_pri | |
| ME Pool succesfully initialized vaddr - d9280000 paddr - 0 | |
| num_elems = 1424 buf_size - 64 pool_size = 102528 | |
| Enable MCAST_TO_UCAST | |
| sysinit: Interface doesn't accept private ioctl... | |
| sysinit: stafwd (8BE0): Invalid argument | |
| DES SSID SET=on | |
| DES SSID SET=ORBI19 | |
| su bfee 1 mu bfee 0 su bfer 1 mu bfer 1 impl bf 0 sounding dim 1 | |
| su bfee 1 mu bfee 0 su bfer 0 mu bfer 1 impl bf 0 sounding dim 1 | |
| su bfee 1 mu bfee 0 su bfer 0 mu bfer 0 impl bf 0 sounding dim 1 | |
| su bfee 0 mu bfee 0 su bfer 0 mu bfer 0 impl bf 0 sounding dim 1 | |
| su bfee 0 mu bfee 0 su bfer 0 mu bfer 0 impl bf 0 sounding dim 1 | |
| sysinit: Interface doesn't accept private ioctl... | |
| sysinit: vhtmubfee (8BE0): Invalid argument | |
| device ath2 entered promiscuous mode | |
| hyfi: Added interface ath2 | |
| ieee80211_ioctl_siwmode: imr.ifm_active=66176, new mode=3, valid=1 | |
| DEVICE IS DOWN ifname=ath2 | |
| DEVICE IS DOWN ifname=ath2 | |
| OL vap_start + | |
| wmi_unified_vdev_start_send for vap 0 (da4e0000) | |
| OL vap_start - | |
| ol_vdev_start_resp_ev for vap 0 (da4e0000) | |
| su bfee 0 mu bfee 0 su bfer 0 mu bfer 0 impl bf 0 sounding dim 1 | |
| wmi_unified_vdev_up_send for vap 0 (da4e0000) | |
| __ieee80211_smart_ant_init: Smart Antenna is not supported | |
| ol_ath_vap_set_param: Now supported MGMT RATE is 6000(kbps) and rate code: 0x3 | |
| br0: port 5(ath2) entered forwarding state | |
| br0: port 5(ath2) entered forwarding state | |
| sysinit: OK | |
| sysinit: /sbin/wlan: eval: line 15: scan_interfaces: not found | |
| sysinit: /sbin/wlan: eval: line 15: setup_interface: not found | |
| sysinit: Invalid command : dyn_bw_rts | |
| sysinit: sh: can't kill pid 6112: No such process | |
| sysinit: /sbin/uci: Entry not found | |
| sysinit: /sbin/uci: Entry not found | |
| wsplcd: starting daemon | |
| sysinit: cat: can't open '/tmp/link_status_5g': No such file or directory | |
| sysinit: sh: bad number | |
| sysinit: sh: bad number | |
| hyfi: Already attached to bridge br0 | |
| ME Pool succesfully initialized vaddr - d9380000 paddr - 0 | |
| num_elems = 1424 buf_size - 64 pool_size = 102528 | |
| Enable MCAST_TO_UCAST | |
| hyd: starting daemon | |
| wmi_unified_vdev_stop_send for vap 0 (dcfd0000) | |
| STOPPED EVENT for vap 0 (dcfd0000) | |
| br0: port 2(ath0) entered disabled state | |
| wmi_unified_vdev_stop_send for vap 0 (da4e0000) | |
| STOPPED EVENT for vap 0 (da4e0000) | |
| br0: port 5(ath2) entered disabled state | |
| sysinit: sh: bad number | |
| Fail-over seamless path switching: Disabled | |
| Load-balancing seamless path switching: Disabled | |
| hyfi: Initialized event process id 7371 | |
| Switch end timeout value: 1500ms | |
| Band steering events being sent to PID:7371 | |
| sysinit: cat: can't open '/tmp/led_color': No such file or directory | |
| sysinit: cat: can't open '/tmp/led_color_5g': No such file or directory | |
| sysinit: backhaul not connected | |
| sysinit: killall: udhcpd: no process killed | |
| sysinit: killall: udhcpd: no process killed | |
| sysinit: backhaul not connected | |
| sysinit: not restart eth_handle when /tmp/disable_satelite_dhcpd existed | |
| The abbreviation of English is Eng! | |
| Passed the checksum verification! | |
| /bin/tar: language_table.tar.gz: time stamp 2017-01-22 06:56:29 is 1485096894.463139194 s in the future | |
| /bin/tar: multi_lang/language_region: time stamp 2017-01-22 06:56:29 is 1485096894.446648965 s in the future | |
| /bin/tar: multi_lang/language_version: time stamp 2017-01-22 06:56:29 is 1485096894.445964986 s in the future | |
| /bin/tar: multi_lang/languages_nonEnglish.js: time stamp 2017-01-22 06:56:29 is 1485096894.419489132 s in the future | |
| /bin/tar: multi_lang: time stamp 2017-01-22 06:56:29 is 1485096894.419001194 s in the future | |
| sysinit: backhaul not connected | |
| sysinit: backhaul not connected | |
| sysinit: not restart eth_handle when /tmp/disable_satelite_dhcpd existed | |
| sysinit: backhaul not connected | |
| sysinit: not restart eth_handle when /tmp/disable_satelite_dhcpd existed | |
| sysinit: backhaul not connected | |
| sysinit: backhaul not connected | |
| sysinit: not restart eth_handle when /tmp/disable_satelite_dhcpd existed | |
| sysinit: backhaul not connected | |
| sysinit: backhaul not connected | |
| sysinit: not restart eth_handle when /tmp/disable_satelite_dhcpd existed | |
| sysinit: backhaul not connected | |
| sysinit: backhaul not connected | |
| sysinit: not restart eth_handle when /tmp/disable_satelite_dhcpd existed | |
| sysinit: backhaul not connected | |
| sysinit: not restart eth_handle when /tmp/disable_satelite_dhcpd existed | |
| sysinit: backhaul not connected | |
| sysinit: backhaul not connected | |
| sysinit: not restart eth_handle when /tmp/disable_satelite_dhcpd existed | |
| sysinit: backhaul not connected | |
| sysinit: backhaul not connected | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Hi jda,
I tried getting into CFE of RBS40V where I can see these commands running on the screen. But, when I tried interrupting it using Ctrl+C to use CFE, it won't respond. Need your help if you please.