raspinfo_3bv1.2

gistfile1.txt

System Information
------------------

Raspberry Pi 3 Model B Rev 1.2
PRETTY_NAME="Raspbian GNU/Linux 10 (buster)"
NAME="Raspbian GNU/Linux"
VERSION_ID="10"
VERSION="10 (buster)"

Raspberry Pi reference 2020-12-02
Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, cce27bd6f44a3b2e83855645986b3e21f771e852, stage5

Linux raspberrypi 5.4.79-v7+ #1373 SMP Mon Nov 23 13:22:33 GMT 2020 armv7l GNU/Linux
Revision	: a02082
Serial		: 00000000e2928def
Model		: Raspberry Pi 3 Model B Rev 1.2
Throttled flag  : throttled=0x0
Camera          : supported=0 detected=0

Videocore information
---------------------

Nov 30 2020 22:13:46 
Copyright (c) 2012 Broadcom
version ab1181cc0cb6df52bfae3b1d3fef0ce7c325166c (clean) (release) (start)

alloc failures:     0
compactions:        0
legacy block fails: 0

Filesystem information
----------------------
Filesystem     1K-blocks    Used Available Use% Mounted on
/dev/root       30353628 8034784  20986252  28% /
devtmpfs          440240       0    440240   0% /dev
tmpfs             473520       0    473520   0% /dev/shm
tmpfs             473520    6304    467216   2% /run
tmpfs               5120       4      5116   1% /run/lock
tmpfs             473520       0    473520   0% /sys/fs/cgroup
/dev/mmcblk0p1    258095   55051    203045  22% /boot

Filename				Type		Size	Used	Priority
/var/swap                               file		102396	0	-2

Package version information
---------------------------
raspberrypi-ui-mods:
  Installed: 1.20201210
raspberrypi-sys-mods:
  Installed: 20201026
openbox:
  Installed: 3.6.1-8+rpt4
lxpanel:
  Installed: 0.10.0-2+rpt13
pcmanfm:
  Installed: 1.3.1-1+rpt24
rpd-plym-splash:
  Installed: 0.25

Networking Information
----------------------

/usr/bin/raspinfo: line 67: ifconfig: command not found

USB Information
---------------

/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/5p, 480M
        |__ Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=smsc95xx, 480M

config.txt
----------

aphy_params_current=819
arm_freq=1200
arm_freq_min=600
audio_pwm_mode=514
config_hdmi_boost=5
core_freq=400
desired_osc_freq=0x387520
disable_commandline_tags=2
disable_l2cache=1
display_hdmi_rotate=-1
display_lcd_rotate=-1
dphy_params_current=547
enable_tvout=1
force_eeprom_read=1
force_pwm_open=1
framebuffer_ignore_alpha=1
framebuffer_swap=1
gpu_freq=300
init_uart_clock=0x2dc6c00
lcd_framerate=60
over_voltage_avs=0x186a0
pause_burst_frames=1
program_serial_random=1
sdram_freq=450
total_mem=1024
hdmi_force_cec_address:0=65535
hdmi_force_cec_address:1=65535
hdmi_pixel_freq_limit:0=0x9a7ec80
device_tree=-
overlay_prefix=overlays/
hdmi_cvt:0=
hdmi_cvt:1=
hdmi_edid_filename:0=
hdmi_edid_filename:1=
hdmi_timings:0=
hdmi_timings:1=

cmdline.txt
-----------
coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=d0ad2f3d-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles

raspi-gpio settings
-------------------

BANK0 (GPIO 0 to 27):
GPIO 0: level=1 fsel=0 func=INPUT
GPIO 1: level=1 fsel=0 func=INPUT
GPIO 2: level=1 fsel=0 func=INPUT
GPIO 3: level=1 fsel=0 func=INPUT
GPIO 4: level=1 fsel=0 func=INPUT
GPIO 5: level=1 fsel=0 func=INPUT
GPIO 6: level=1 fsel=0 func=INPUT
GPIO 7: level=1 fsel=0 func=INPUT
GPIO 8: level=1 fsel=1 func=OUTPUT
GPIO 9: level=0 fsel=4 alt=0 func=SPI0_MISO
GPIO 10: level=0 fsel=4 alt=0 func=SPI0_MOSI
GPIO 11: level=0 fsel=4 alt=0 func=SPI0_SCLK
GPIO 12: level=0 fsel=0 func=INPUT
GPIO 13: level=0 fsel=0 func=INPUT
GPIO 14: level=0 fsel=0 func=INPUT
GPIO 15: level=1 fsel=0 func=INPUT
GPIO 16: level=0 fsel=0 func=INPUT
GPIO 17: level=0 fsel=0 func=INPUT
GPIO 18: level=0 fsel=0 func=INPUT
GPIO 19: level=0 fsel=0 func=INPUT
GPIO 20: level=0 fsel=0 func=INPUT
GPIO 21: level=0 fsel=0 func=INPUT
GPIO 22: level=0 fsel=0 func=INPUT
GPIO 23: level=0 fsel=0 func=INPUT
GPIO 24: level=0 fsel=0 func=INPUT
GPIO 25: level=0 fsel=0 func=INPUT
GPIO 26: level=0 fsel=0 func=INPUT
GPIO 27: level=0 fsel=0 func=INPUT
BANK1 (GPIO 28 to 45):
GPIO 28: level=0 fsel=0 func=INPUT
GPIO 29: level=1 fsel=0 func=INPUT
GPIO 30: level=0 fsel=0 func=INPUT
GPIO 31: level=0 fsel=0 func=INPUT
GPIO 32: level=1 fsel=7 alt=3 func=TXD0
GPIO 33: level=1 fsel=7 alt=3 func=RXD0
GPIO 34: level=0 fsel=7 alt=3 func=SD1_CLK
GPIO 35: level=1 fsel=7 alt=3 func=SD1_CMD
GPIO 36: level=1 fsel=7 alt=3 func=SD1_DAT0
GPIO 37: level=1 fsel=7 alt=3 func=SD1_DAT1
GPIO 38: level=1 fsel=7 alt=3 func=SD1_DAT2
GPIO 39: level=1 fsel=7 alt=3 func=SD1_DAT3
GPIO 40: level=0 fsel=4 alt=0 func=PWM0
GPIO 41: level=0 fsel=4 alt=0 func=PWM1
GPIO 42: level=0 fsel=4 alt=0 func=GPCLK1
GPIO 43: level=0 fsel=4 alt=0 func=GPCLK2
GPIO 44: level=1 fsel=0 func=INPUT
GPIO 45: level=1 fsel=0 func=INPUT
BANK2 (GPIO 46 to 53):
GPIO 46: level=1 fsel=0 func=INPUT
GPIO 47: level=1 fsel=1 func=OUTPUT
GPIO 48: level=0 fsel=4 alt=0 func=SD0_CLK
GPIO 49: level=1 fsel=4 alt=0 func=SD0_CMD
GPIO 50: level=1 fsel=4 alt=0 func=SD0_DAT0
GPIO 51: level=1 fsel=4 alt=0 func=SD0_DAT1
GPIO 52: level=1 fsel=4 alt=0 func=SD0_DAT2
GPIO 53: level=1 fsel=4 alt=0 func=SD0_DAT3

vcdbg log messages
------------------

001248.417: brfs: File read: /mfs/sd/config.txt
001249.457: brfs: File read: 1803 bytes
001319.297: brfs: File read: /mfs/sd/config.txt
001320.246: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined
001340.054: brfs: File read: 1803 bytes
001532.929: gpioman: gpioman_get_pin_num: pin DISPLAY_DSI_PORT not defined
001534.179: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined
001534.245: *** Restart logging
001553.677: HDMI0: hdmi_pixel_encoding: 162000000
001558.946: dtb_file 'bcm2710-rpi-3-b.dtb'
001564.961: brfs: File read: /mfs/sd/bcm2710-rpi-3-b.dtb
001564.985: Loading 'bcm2710-rpi-3-b.dtb' to 0x100 size 0x6d2c
001578.255: brfs: File read: 27948 bytes
001590.882: brfs: File read: /mfs/sd/overlays/overlay_map.dtb
001651.428: brfs: File read: 1523 bytes
001655.996: brfs: File read: /mfs/sd/config.txt
001657.142: brfs: File read: 1803 bytes
001667.029: brfs: File read: /mfs/sd/overlays/spi0-1cs.dtbo
001680.288: Loaded overlay 'spi0-1cs'
001680.406: dtparam: audio=on
001712.763: brfs: File read: 1045 bytes
001716.131: brfs: File read: /mfs/sd/cmdline.txt
001716.192: Read command line from file 'cmdline.txt':
001716.215: 'console=serial0,115200 console=tty1 root=PARTUUID=d0ad2f3d-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles'
003521.033: gpioman: gpioman_get_pin_num: pin EMMC_ENABLE not defined
003575.592: brfs: File read: 166 bytes
003976.237: brfs: File read: /mfs/sd/kernel7.img
003976.261: Loading 'kernel7.img' to 0x8000 size 0x584af0
003976.292: Device tree loaded to 0x2eff8e00 (size 0x7190)
003978.634: gpioman: gpioman_get_pin_num: pin SDCARD_CONTROL_POWER not defined
007031.215: vchiq_core: vchiq_init_state: slot_zero = 0xf7580000, is_master = 1
007035.826: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
007041.578: TV service:host side not connected, dropping notification 0x00000002, 0x00000002, 0x00000052

dmesg log
---------

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.4.79-v7+ (dom@buildbot) (gcc version 8.4.0 (Ubuntu/Linaro 8.4.0-3ubuntu1)) #1373 SMP Mon Nov 23 13:22:33 GMT 2020
[    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] Reserved memory: created CMA memory pool at 0x37400000, size 64 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] On node 0 totalpages: 242688
[    0.000000]   Normal zone: 2133 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 242688 pages, LIFO batch:63
[    0.000000] percpu: Embedded 20 pages/cpu s49740 r8192 d23988 u81920
[    0.000000] pcpu-alloc: s49740 r8192 d23988 u81920 alloc=20*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 240555
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=d0ad2f3d-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 880480K/970752K available (9216K kernel code, 698K rwdata, 2608K rodata, 1024K init, 827K bss, 24736K reserved, 65536K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 29201 entries in 58 pages
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] random: get_random_bytes called from start_kernel+0x324/0x4f8 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000017] Switching to timer-based delay loop, resolution 52ns
[    0.000281] Console: colour dummy device 80x30
[    0.000307] printk: console [tty1] enabled
[    0.000356] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000374] pid_max: default: 32768 minimum: 301
[    0.000563] LSM: Security Framework initializing
[    0.000780] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.000800] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.002241] Disabling memory control group subsystem
[    0.002360] CPU: Testing write buffer coherency: ok
[    0.002925] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.003862] Setting up static identity map for 0x100000 - 0x10003c
[    0.004058] rcu: Hierarchical SRCU implementation.
[    0.004741] smp: Bringing up secondary CPUs ...
[    0.005863] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.007138] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.008299] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.008455] smp: Brought up 1 node, 4 CPUs
[    0.008470] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.008480] CPU: All CPU(s) started in HYP mode.
[    0.008489] CPU: Virtualization extensions available.
[    0.009453] devtmpfs: initialized
[%                                                                                                                                                                0.025832] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[    0.026089] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.026116] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.029375] pinctrl core: initialized pinctrl subsystem
[    0.030572] NET: Registered protocol family 16
[    0.034877] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.039650] audit: initializing netlink subsys (disabled)
[    0.039922] audit: type=2000 audit(0.030:1): state=initialized audit_enabled=0 res=1
[    0.041510] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.041520] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.041734] Serial: AMBA PL011 UART driver
[    0.043686] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.060089] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-11-30 22:13, variant start
[    0.070103] raspberrypi-firmware soc:firmware: Firmware hash is ab1181cc0cb6df52bfae3b1d3fef0ce7c325166c
[    0.121974] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1
[    0.124130] SCSI subsystem initialized
[    0.124383] usbcore: registered new interface driver usbfs
[    0.124445] usbcore: registered new interface driver hub
[    0.124568] usbcore: registered new device driver usb
[    0.126548] clocksource: Switched to clocksource arch_sys_counter
[    1.386929] VFS: Disk quotas dquot_6.6.0
[    1.387040] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.387231] FS-Cache: Loaded
[    1.387505] CacheFiles: Loaded
[    1.398748] thermal_sys: Registered thermal governor 'step_wise'
[    1.399133] NET: Registered protocol family 2
[    1.400124] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    1.400169] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    1.400284] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    1.400473] TCP: Hash tables configured (established 8192 bind 8192)
[    1.400637] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.400690] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.400978] NET: Registered protocol family 1
[    1.401691] RPC: Registered named UNIX socket transport module.
[    1.401702] RPC: Registered udp transport module.
[    1.401711] RPC: Registered tcp transport module.
[    1.401721] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.403505] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[    1.406872] Initialise system trusted keyrings
[    1.407128] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    1.418706] FS-Cache: Netfs 'nfs' registered for caching
[    1.419504] NFS: Registering the id_resolver key type
[    1.419550] Key type id_resolver registered
[    1.419560] Key type id_legacy registered
[    1.419580] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.420873] Key type asymmetric registered
[    1.420884] Asymmetric key parser 'x509' registered
[    1.420947] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.420959] io scheduler mq-deadline registered
[    1.420969] io scheduler kyber registered
[    1.425764] bcm2708_fb soc:fb: FB found 1 display(s)
[    1.464829] Console: switching to colour frame buffer device 240x67
[    1.500366] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1920x1080
[    1.505728] bcm2835-rng 3f104000.rng: hwrng registered
[    1.506225] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[    1.506978] vc-sm: Videocore shared memory driver
[    1.507458] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[    1.520438] brd: module loaded
[    1.533375] loop: module loaded
[    1.534809] Loading iSCSI transport class v2.0-870.
[    1.535709] libphy: Fixed MDIO Bus: probed
[    1.535822] usbcore: registered new interface driver lan78xx
[    1.535885] usbcore: registered new interface driver smsc95xx
[    1.535908] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    2.264174] Core Release: 2.80a
[    2.264200] Setting default values for core params
[    2.264233] Finished setting default values for core params
[    2.464648] Using Buffer DMA mode
[    2.464660] Periodic Transfer Interrupt Enhancement - disabled
[    2.464670] Multiprocessor Interrupt Enhancement - disabled
[    2.464681] OTG VER PARAM: 0, OTG VER FLAG: 0
[    2.464707] Dedicated Tx FIFOs mode
[    2.465420] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = b7504000 dma = 0xf7504000 len=9024
[    2.465452] FIQ FSM acceleration enabled for :
               Non-periodic Split Transactions
               Periodic Split Transactions
               High-Speed Isochronous Endpoints
               Interrupt/Control Split Transaction hack enabled
[    2.465464] dwc_otg: Microframe scheduler enabled
[    2.465529] WARN::hcd_init_fiq:457: FIQ on core 1
[    2.465538] WARN::hcd_init_fiq:458: FIQ ASM at 8070b948 length 36
[    2.465550] WARN::hcd_init_fiq:497: MPHI regs_base at bb810000
[    2.465572] dwc_otg 3f980000.usb: DWC OTG Controller
[    2.465610] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    2.465660] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000
[    2.465712] Init: Port Power? op_state=1
[    2.465721] Init: Power Port (0)
[    2.466109] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    2.466125] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.466140] usb usb1: Product: DWC OTG Controller
[    2.466154] usb usb1: Manufacturer: Linux 5.4.79-v7+ dwc_otg_hcd
[    2.466168] usb usb1: SerialNumber: 3f980000.usb
[    2.466927] hub 1-0:1.0: USB hub found
[    2.466993] hub 1-0:1.0: 1 port detected
[    2.467784] dwc_otg: FIQ enabled
[    2.467793] dwc_otg: NAK holdoff enabled
[    2.467803] dwc_otg: FIQ split-transaction FSM enabled
[    2.467818] Module dwc_common_port init
[    2.468161] usbcore: registered new interface driver usb-storage
[    2.468354] mousedev: PS/2 mouse device common for all mice
[    2.469541] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    2.472312] sdhci: Secure Digital Host Controller Interface driver
[    2.472322] sdhci: Copyright(c) Pierre Ossman
[    2.472934] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe
[    2.473592] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[    2.473825] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.475688] ledtrig-cpu: registered to indicate activity on CPUs
[    2.476085] hidraw: raw HID events driver (C) Jiri Kosina
[    2.476255] usbcore: registered new interface driver usbhid
[    2.476264] usbhid: USB HID core driver
[    2.477428] vchiq: vchiq_init_state: slot_zero = (ptrval)
[    2.479351] [vc_sm_connected_init]: start
[    2.489065] [vc_sm_connected_init]: end - returning 0
[    2.491083] Initializing XFRM netlink socket
[    2.491120] NET: Registered protocol family 17
[    2.491281] Key type dns_resolver registered
[    2.492039] Registering SWP/SWPB emulation handler
[    2.492362] registered taskstats version 1
[    2.492384] Loading compiled-in X.509 certificates
[    2.492940] Key type ._fscrypt registered
[    2.492951] Key type .fscrypt registered
[    2.503875] uart-pl011 3f201000.serial: cts_event_workaround enabled
[    2.503978] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2
[    2.505949] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    2.507616] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
[    2.507630] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
[    2.534264] sdhost: log_buf @ (ptrval) (f7507000)
[    2.572538] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    2.574171] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.575806] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.578762] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    2.583197] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    2.585849] of_cfs_init
[    2.586166] of_cfs_init: OK
[    2.587361] Waiting for root device PARTUUID=d0ad2f3d-02...
[    2.645633] random: fast init done
[    2.673325] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.678048] mmc0: new high speed SDHC card at address aaaa
[    2.679288] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
[    2.683067]  mmcblk0: p1 p2
[    2.686811] Indeed it is in host mode hprt0 = 00021501
[    2.721780] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    2.721883] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    2.729920] devtmpfs: mounted
[    2.748787] Freeing unused kernel memory: 1024K
[    2.759078] mmc1: new high speed SDIO card at address 0001
[    2.787001] Run /sbin/init as init process
[    2.896623] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.896806] Indeed it is in host mode hprt0 = 00001101
[    3.137004] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
[    3.137022] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.137834] hub 1-1:1.0: USB hub found
[    3.137949] hub 1-1:1.0: 5 ports detected
[    3.416738] systemd[1]: System time before build time, advancing clock.
[    3.456620] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    3.550968] NET: Registered protocol family 10
[    3.552398] Segment Routing with IPv6
[    3.588047] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
[    3.588127] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.592999] smsc95xx v1.0.6
[    3.617584] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    3.618610] systemd[1]: Detected architecture arm.
[    3.685825] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, m.m.m.m
[    3.690337] systemd[1]: Set hostname to <raspberrypi>.
[    4.627578] random: systemd: uninitialized urandom read (16 bytes read)
[    4.649052] random: systemd: uninitialized urandom read (16 bytes read)
[    4.650235] systemd[1]: Listening on fsck to fsckd communication Socket.
[    4.650704] random: systemd: uninitialized urandom read (16 bytes read)
[    4.658669] systemd[1]: Listening on udev Control Socket.
[    4.659609] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.659762] systemd[1]: Reached target Swap.
[    4.660400] systemd[1]: Listening on Syslog Socket.
[    4.661662] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.662312] systemd[1]: Listening on udev Kernel Socket.
[    4.941729] i2c /dev entries driver
[    5.453934] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    5.571650] systemd-journald[103]: Received request to flush runtime journal from PID 1
[    6.254311] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[    6.257779] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[    6.257804] [vc_sm_connected_init]: start
[    6.260887] [vc_sm_connected_init]: installed successfully
[    6.315189] mc: Linux media interface: v0.10
[    6.385286] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[    6.400038] bcm2835_audio bcm2835_audio: card created with 4 channels
[    6.404594] bcm2835_audio bcm2835_audio: card created with 4 channels
[    6.412561] videodev: Linux video capture interface: v2.00
[    6.485793] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    6.485800] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    6.489225] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    6.497918] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[    6.503466] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[    6.507064] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[    6.543271] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[    6.543327] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[    6.544016] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[    6.544682] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[    6.557515] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[    6.559366] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[    6.559461] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[    6.559546] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[    6.560111] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[    6.560204] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[    6.565593] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[    6.567110] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[    6.567283] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[    6.607114] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[    6.607194] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[    6.964418] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    7.169599] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    7.322303] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[    7.336910] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[    7.337251] usbcore: registered new interface driver brcmfmac
[    7.410422] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,3-model-b.txt failed with error -2
[    7.659143] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[    7.659290] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[    7.660207] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 22 2019 01:59:28 version 7.45.98.94 (r723000 CY) FWID 01-3b33decd
[    9.428718] random: crng init done
[    9.428744] random: 7 urandom warning(s) missed due to ratelimiting
[    9.664520] uart-pl011 3f201000.serial: no DMA platform data
[    9.897052] 8021q: 802.1Q VLAN Support v1.8
[   10.266993] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:102396k SSFS
[   10.819691] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[   12.426053] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[   13.931033] Bluetooth: Core ver 2.22
[   13.931123] NET: Registered protocol family 31
[   13.931133] Bluetooth: HCI device and connection manager initialized
[   13.931162] Bluetooth: HCI socket layer initialized
[   13.931178] Bluetooth: L2CAP socket layer initialized
[   13.931224] Bluetooth: SCO socket layer initialized
[   13.944249] Bluetooth: HCI UART driver ver 2.3
[   13.944268] Bluetooth: HCI UART protocol H4 registered
[   13.944390] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   13.945256] Bluetooth: HCI UART protocol Broadcom registered
[   14.183914] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   14.183932] Bluetooth: BNEP filters: protocol multicast
[   14.183954] Bluetooth: BNEP socket layer initialized
[   36.356467] warning: process `colord-sane' used the deprecated sysctl system call with 8.1.2.