Publish hiveos logs to mqtt broker

hiveos2mqtt.sh

#!/bin/bash
# MQTT settings
BROKER=""
TOPIC=""
USER=""
PASS=""

# Ensure mosquitto-clients is installed
dpkg -s mosquitto-clients >/dev/null 2>&1 || apt update && apt install -y mosquitto-clients

# Stream logs to MQTT
tail -f /var/log/hive-agent.log | while read -r line; do
    json_line=$(echo ${line} | awk -F'[<>]' {'print $2'})
    if $(echo "$json_line" | jq -e 'has("method")'); then
        mosquitto_pub -h $BROKER -t $TOPIC -u "$USER" -P "$PASS" -m "$json_line"
    fi
done

mqtt_sensors.yaml

- platform: mqtt
  name: hiveos_stats
  state_topic: "hiveos"
  value_template: "{{ value_json.params.uptime }}"
  json_attributes_topic: "hiveos"
  json_attributes_template: "{{ value_json.params.miner_stats | to_json }}"
- platform: mqtt
  name: hiveos_params
  state_topic: "hiveos"
  value_template: "{{ value_json.params .uptime }}"
  json_attributes_topic: "hiveos"
  json_attributes_template: "{{ value_json.params | to_json }}"

Great. Can anyone describe how to implement this? Should I compile this? Or just copy and paste on my hiveos?

@PablexXXXX add the mqtt_sensors.yaml to your HA configuration, and run the hiveos2mqtt.sh on your miner. You will need to make sure that it runs on boot. I will share my experience on setting up the script to start on boot when I give it a try.

Thanks for your great work.
i have managed to get the worker to connect to the MQTT broker on my home assistant, but i get no data, and sensors are unavailable
i get this on mqtt broker logs
1660905302: New connection from 192.168.1.140:51864 on port 1883.
1660905302: New client connected from 192.168.1.140:51864 as mosqpub|26074-hive02_30 (p1, c1, k60, u'mqtt').

then in the config.yaml for my home assistant i have added
sensor:

• platform: mqtt
  name: hiveos_stats
  state_topic: "hive_mqtt_1"
  value_template: "{{ value_json.params.miner_stats.uptime }}"
  json_attributes_topic: "hive_mqtt_1"
  json_attributes_template: "{{ value_json.params.miner_stats | to_json }}"

• platform: mqtt
  name: hiveos_params
  state_topic: "hive_mqtt_1"
  value_template: "{{ value_json.params.miner_stats.uptime }}"
  json_attributes_topic: "hive_mqtt_1"
  json_attributes_template: "{{ value_json.params | to_json }}"

im a bit confused
should i add a new file somewhere named mqtt_sensors.yaml
and if yes, where should the file be located