A [Homebrew] formula for installing [PulseAudio] on OS X.
Tested on 10.10.
Summary of changes:
- change module-detect => module-coreaudio-detect
- comment out module-console-kit
-
-
Save jhgorse/b0d20edd15e7ebeff410 to your computer and use it in GitHub Desktop.
PulseAudio homebrew formula
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| #!/usr/local/Cellar/pulseaudio/6.0/bin/pulseaudio -nF | |
| # | |
| # This file is part of PulseAudio. | |
| # | |
| # PulseAudio is free software; you can redistribute it and/or modify it | |
| # under the terms of the GNU Lesser General Public License as published by | |
| # the Free Software Foundation; either version 2 of the License, or | |
| # (at your option) any later version. | |
| # | |
| # PulseAudio is distributed in the hope that it will be useful, but | |
| # WITHOUT ANY WARRANTY; without even the implied warranty of | |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| # General Public License for more details. | |
| # | |
| # You should have received a copy of the GNU Lesser General Public License | |
| # along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. | |
| # This startup script is used only if PulseAudio is started per-user | |
| # (i.e. not in system mode) | |
| .nofail | |
| ### Load something into the sample cache | |
| #load-sample-lazy x11-bell /usr/share/sounds/freedesktop/stereo/bell.oga | |
| #load-sample-lazy pulse-hotplug /usr/share/sounds/freedesktop/stereo/device-added.oga | |
| #load-sample-lazy pulse-coldplug /usr/share/sounds/freedesktop/stereo/device-added.oga | |
| #load-sample-lazy pulse-access /usr/share/sounds/freedesktop/stereo/message.oga | |
| .fail | |
| ### Automatically restore the volume of streams and devices | |
| load-module module-device-restore | |
| load-module module-stream-restore | |
| load-module module-card-restore | |
| ### Automatically augment property information from .desktop files | |
| ### stored in /usr/share/application | |
| load-module module-augment-properties | |
| ### Should be after module-*-restore but before module-*-detect | |
| load-module module-switch-on-port-available | |
| ### Load audio drivers statically | |
| ### (it's probably better to not load these drivers manually, but instead | |
| ### use module-udev-detect -- see below -- for doing this automatically) | |
| #load-module module-null-sink | |
| #load-module module-pipe-sink | |
| ### Automatically load driver modules depending on the hardware available | |
| .ifexists module-coreaudio-detect.so | |
| ### Use the static hardware detection module (for systems that lack udev support) | |
| load-module module-coreaudio-detect | |
| .endif | |
| ### Automatically connect sink and source if JACK server is present | |
| .ifexists module-jackdbus-detect.so | |
| .nofail | |
| load-module module-jackdbus-detect channels=2 | |
| .fail | |
| .endif | |
| ### Load several protocols | |
| .ifexists module-esound-protocol-unix.so | |
| load-module module-esound-protocol-unix | |
| .endif | |
| load-module module-native-protocol-unix | |
| ### Network access (may be configured with paprefs, so leave this commented | |
| ### here if you plan to use paprefs) | |
| #load-module module-esound-protocol-tcp | |
| #load-module module-native-protocol-tcp | |
| ### Load the RTP receiver module (also configured via paprefs, see above) | |
| #load-module module-rtp-recv | |
| ### Load the RTP sender module (also configured via paprefs, see above) | |
| #load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'" | |
| #load-module module-rtp-send source=rtp.monitor | |
| ### Load additional modules from GConf settings. This can be configured with the paprefs tool. | |
| ### Please keep in mind that the modules configured by paprefs might conflict with manually | |
| ### loaded modules. | |
| .ifexists module-gconf.so | |
| .nofail | |
| load-module module-gconf | |
| .fail | |
| .endif | |
| ### Automatically restore the default sink/source when changed by the user | |
| ### during runtime | |
| ### NOTE: This should be loaded as early as possible so that subsequent modules | |
| ### that look up the default sink/source get the right value | |
| load-module module-default-device-restore | |
| ### Automatically move streams to the default sink if the sink they are | |
| ### connected to dies, similar for sources | |
| load-module module-rescue-streams | |
| ### Make sure we always have a sink around, even if it is a null sink. | |
| load-module module-always-sink | |
| ### Honour intended role device property | |
| load-module module-intended-roles | |
| ### Automatically suspend sinks/sources that become idle for too long | |
| load-module module-suspend-on-idle | |
| ### If autoexit on idle is enabled we want to make sure we only quit | |
| ### when no local session needs us anymore. | |
| #.ifexists module-console-kit.so | |
| #load-module module-console-kit | |
| #.endif | |
| .ifexists module-systemd-login.so | |
| load-module module-systemd-login | |
| .endif | |
| ### Enable positioned event sounds | |
| load-module module-position-event-sounds | |
| ### Cork music/video streams when a phone stream is active | |
| load-module module-role-cork | |
| ### Modules to allow autoloading of filters (such as echo cancellation) | |
| ### on demand. module-filter-heuristics tries to determine what filters | |
| ### make sense, and module-filter-apply does the heavy-lifting of | |
| ### loading modules and rerouting streams. | |
| load-module module-filter-heuristics | |
| load-module module-filter-apply | |
| ### Make some devices default | |
| #set-default-sink output | |
| #set-default-source input |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| #!/usr/local/Cellar/pulseaudio/6.0/bin/pulseaudio -nF | |
| # | |
| # This file is part of PulseAudio. | |
| # | |
| # PulseAudio is free software; you can redistribute it and/or modify it | |
| # under the terms of the GNU Lesser General Public License as published by | |
| # the Free Software Foundation; either version 2 of the License, or | |
| # (at your option) any later version. | |
| # | |
| # PulseAudio is distributed in the hope that it will be useful, but | |
| # WITHOUT ANY WARRANTY; without even the implied warranty of | |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| # General Public License for more details. | |
| # | |
| # You should have received a copy of the GNU Lesser General Public License | |
| # along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. | |
| # This startup script is used only if PulseAudio is started in system | |
| # mode. | |
| ### Automatically load driver modules depending on the hardware available | |
| .ifexists module-coreaudio-detect.so | |
| ### Use the static hardware detection module (for systems that lack udev/hal support) | |
| load-module module-coreaudio-detect | |
| .endif | |
| ### Load several protocols | |
| .ifexists module-esound-protocol-unix.so | |
| load-module module-esound-protocol-unix | |
| .endif | |
| load-module module-native-protocol-unix | |
| ### Automatically restore the volume of streams and devices | |
| load-module module-stream-restore | |
| load-module module-device-restore | |
| ### Automatically restore the default sink/source when changed by the user | |
| ### during runtime | |
| ### NOTE: This should be loaded as early as possible so that subsequent modules | |
| ### that look up the default sink/source get the right value | |
| load-module module-default-device-restore | |
| ### Automatically move streams to the default sink if the sink they are | |
| ### connected to dies, similar for sources | |
| load-module module-rescue-streams | |
| ### Make sure we always have a sink around, even if it is a null sink. | |
| load-module module-always-sink | |
| ### Automatically suspend sinks/sources that become idle for too long | |
| load-module module-suspend-on-idle | |
| ### Enable positioned event sounds | |
| load-module module-position-event-sounds |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment