Workaround for issue that GAMAKAY software can't detect my LK67

lk67-fix.md

This is a workaround for issue that software can't detect my LK67 (prebuild version). It seems Banggood's supplier of LK67 uses wrong firmware, or maybe uses recycled MCU?

Prerequisites

• GamaKay Driver v1.1.13
• node.js

Prettify Javascript code

cd "C:\Users\<user name>\AppData\Local\Programs\GAMAKAY Driver\resources\app\dist"
npx prettier --write main.js index.js

Investigate keyboard ID

Find the following line in main.js. Add "!" at start of line.

              !a.app.isPackaged || c.webContents.openDevTools(),

After Launch "GAMAKAY Driver", you will see application window with DevTools. Select the console tab on DevTools, then find message "DDDEEEVVUUUUIIIIDDDD 71". 71 is your keyboard id.

Rewrite keyboard definition table

Find following block in index.js, then change the value of id to your keyboard id.

          {
            id: 71,  // original id is 149.
            vid: 1121,
            pid: 16386,
            usage: 6,
            usagePage: 1,
            name: "yzw_lk67",
            displayName: "LK67",
            support_onboard: 2,
            type: "keyboard",
            group: K,
            featureReportByteLength: 65,
            company: "gamakay2",
            layer: 8,
            layout: d.lightHFLayout,
          },

Banggood's seller posted a download link of new firmware at Q&A. I confirmed that new firmware has correct id 149(Gamakay LK67). This workaround is not necessary any more.

Banggood's seller posted a download link of new firmware at Q&A. I confirmed that new firmware has correct id 149(Gamakay LK67). This workaround is not necessary any more.

Hello, could you provide me with the link to the new firmware? I can't find it and I am writing a review about the LK67, so it would be very nice to try out the software! Thank you in advance. I right now have 1.1.14 but it doesn't work

You can find a link at second page of Q&As section of product page (blue prebuild LK67).
If your board is bricked, I don't take any responsibility. You should ask banggood for detail.

This issue and banggood's support were really annoying to me. I wrote this workaround to proof of seller's fault, not intended to help them.

Been having issues with the keyboard's firmware. Do anybody know how to re-flash the firmware, if it's even possible? Suddenly the 1, Q, A and Windows keys are not being recognized...

Hi! i used @Harry-Cowshed configuration having the v1.1.14, but only works after reboot mi laptop.

There's a new fix from GamaKay
GamaKay Downloads

Save this archive, run the program and follow the .pdf images.

Hello, i've been struggling to figure out this firmware stuff and if any of you could help that would be great.

https://gamakay.com/pages/downloads
On this link is possible to download de firmeware update for de khyboard

Hi. Thanks for the comments, they were very helpful. The driver as you mentioned above, has been installed successfully, but it doesn't work when I try to use the keyboard with the dongle, ( I haven't try with the Bluetooth yet).
Is there any solution for this?

Thnx a lot.

I just tried the Bluetooth. It doesn't work either.

it still does not work. official website doesn't either

Thnx for the feedback. Yes I tried to find a solution through the official web site, but nothing came up.

you need to update de firmeware first, after that you can use the software normally
https://delivery.shopifyapps.com/-/1a708157c0aa5151/518a34011c2a4c5e

Thank you very much for the answer. But, I run what you told me, it went perfect, but when I open the app to try to configure the layout of the keyboard freezes at the start up sceen, trying to identify the driver.

Thank you very much for the answer. But, I run what you told me, it went perfect, but when I open the app to try to configure the layout of the keyboard freezes at the start up sceen, trying to identify the driver.

Im getting this as well with a TK68. I just downloaded the drivers (never ran any gama kay software before on MAC OS, and it just says searching device, It doesn't seem frozen.

@InternetRodent have you found a solution? I bought TK68 too and experiencing same issue. Even reached out gamakay support, they emailed me a firmware, but the firmware also seems cannot detect the keyboard akin to software :( Tried to mess around with index.js properties as well - also no luck...

@InternetRodent have you found a solution? I bought TK68 too and experiencing same issue. Even reached out gamakay support, they emailed me a firmware, but the firmware also seems cannot detect the keyboard akin to software :( Tried to mess around with index.js properties as well - also no luck...

No I ended up just changing the modifier keys through the Mac OS settings, and that was good enough for the time being, I totally forgot about this, let me know if you do get the software working.

This is a config for TK68 that I use for working GAMAKAY Driver. As you can see, the TK68 use another VID. So you should change VID to yours and than app will works. But I can't guarantee that working with this app won't ruin your keyboard. Therefore, do everything at your own peril and risk

{
            id: 71,
            vid: 12625,
            pid: 16386,
            usage: 6,
            usagePage: 1,
            name: "yzw_lk67",
            displayName: "Homoo Gaming Keyboard",
            support_onboard: 2,
            type: "keyboard",
            group: N,
            featureReportByteLength: 65,
            company: "gamakay2",
            layer: 8,
            layout: i.lightHFLayout,
}

P.S. The App does not always detect the keyboard, so sometimes you need to restart it in order for everything to work