exs4-autosetup

## ===================================================
##  Hetzner Online AG - installimage - standardconfig.
## ===================================================



## ====================
##  HARD DISK DRIVE(S):
## ====================


# ST3000DM001-9YN166
DRIVE1 /dev/sda

# ST3000DM001-9YN166
DRIVE2 /dev/sdb



## ===============
##  SOFTWARE RAID:
## ===============

## activate software RAID?  < 0 | 1 >

SWRAID 0

## Choose the level for the software RAID < 0 | 1 >

SWRAIDLEVEL 1



## ============
##  BOOTLOADER:
## ============


## do not change this for CentOS or Ubuntu 12.04 (grub only)!:

BOOTLOADER grub


## ==========
##  HOSTNAME:
## ==========

## which hostname should be set?
##.

HOSTNAME CentOS-58-32-minimal



## ==========================
##  PARTITIONS / FILESYSTEMS:
## ==========================


## define your partitions and filesystems like this:
##
## PART  <mountpoint/lvm>  <filesystem/VG>  <size in MB>
##
## * <mountpoint/lvm> mountpoint for this filesystem  *OR*  keyword 'lvm'
##                    to use this PART as volume group (VG) for LVM
## * <filesystem/VG>  can be ext2, ext3, reiserfs, xfs, swap  *OR*  name
##                    of the LVM volume group (VG), if this PART is a VG
## * <size>           you can use the keyword 'all' to assign all the
##                    remaining space of the drive to the *last* partition.
##                    you can use M/G/T for unit specification in MIB/GIB/TIB
##
## notes:
##   - extended partitions are created automatically
##   - '/boot' cannot be on a xfs filesystem!
##   - '/boot' cannot be on LVM!
##   - when using software RAID 0, you need a '/boot' partition
##
## example without LVM (default):
## -> 4GB   swapspace
## -> 512MB /boot
## -> 10GB  /
## -> 5GB   /tmp
## -> all the rest to /home
#PART swap   swap      4096
#PART /boot  ext2       512
#PART /      reiserfs 10240
#PART /tmp   xfs       5120
#PART /home  ext3       all
#
##
## to activate LVM, you have to define volume groups and logical volumes
##
## example with LVM:
#
## normal filesystems and volume group definitions:
## -> 512MB boot  (not on lvm)
## -> all the rest for LVM VG 'vg0'
#PART /boot  ext2     512M
#PART lvm    vg0       all
#
## logical volume definitions:
#LV <VG> <name> <mount> <filesystem> <size>
#
#LV vg0   root   /        ext3         10G
#LV vg0   swap   swap     swap          4G
#LV vg0   tmp    /tmp     reiserfs      5G
#LV vg0   home   /home    xfs          20G
#
#
## your system has the following devices:
#
# Disk /dev/sda doesn't contain a valid partition table  (=> /dev/sda doesn't)
# Disk /dev/sdb doesn't contain a valid partition table  (=> /dev/sdb doesn't)
# Disk /dev/sda: 3000.6 GB  (=> 2861 GIB)
# Disk /dev/sdb: 3000.6 GB  (=> 2861 GIB)
#
## Based on your disks and which RAID level you will choose you have
## the following free space to allocate (in GiB):
# RAID  0: ~5588
# RAID  1: ~2794
#

PART swap swap 32G
PART /boot ext3 512M
PART / ext4 1024G
PART /home ext4 all



## ========================
##  OPERATING SYSTEM IMAGE:
## ========================

## full path to the operating system image
##   supported image sources:  local dir,  ftp,  http,  nfs
##   supported image types:  tar,  tar.gz,  tar.bz,  tar.bz2,  tgz,  tbz
## examples:
#
# local: /path/to/image/filename.tar.gz
# ftp:   ftp://<user>:<password>@hostname/path/to/image/filename.tar.bz2
# http:  http://<user>:<password>@hostname/path/to/image/filename.tbz
# https: https://<user>:<password>@hostname/path/to/image/filename.tbz
# nfs:   hostname:/path/to/image/filename.tgz

IMAGE /root/.oldroot/nfs/install/../images/CentOS-58-32-minimal.tar.gz