Install tools for Stellaris LM4F120 LaunchPad Evaluation Board on Fedora (and probably other RPM-based distros)

stellaris.sh

#!/bin/bash
# copyleft 2013 Jakub Kramarz http://hskrk.pl
# based on http://www.jann.cc/2012/12/11/getting_started_with_the_ti_stellaris_launchpad_on_linux.html

set -x
function install_gcc_arm_embedded() {
	sudo yum install glibc.i686
	wget https://launchpad.net/gcc-arm-embedded/4.7/4.7-2013-q2-update/+download/gcc-arm-none-eabi-4_7-2013q2-20130614-linux.tar.bz2
	tar -xf gcc-arm-none-eabi-4_7-2013q2-20130614-linux.tar.bz2 -C $HOME/.local
	rm gcc-arm-none-eabi-4_7-2013q2-20130614-linux.tar.bz2
	cd $HOME/.local
	cp gcc-arm-none-eabi-4_7-2013q2/* -Rf .
	rm -Rf gcc-arm-none-eabi-4_7-2013q2
}

function install_lm4tools() {
	sudo yum install libusbx-devel
	git clone https://github.com/utzig/lm4tools.git
	cd lm4tools/lm4flash/
	make
	mkdir -p $HOME/.local/bin
	cp lm4flash $HOME/.local/bin
	cd -
	rm -Rf lm4tools
}


function install_openocd() {
	sudo yum install libtool texinfo
	git clone git://git.code.sf.net/p/openocd/code openocd.git
	cd openocd.git
	./bootstrap
	./configure --prefix=$HOME/.local --enable-maintainer-mode --enable-stlink --enable-ti-icdi
	make
	make install
	cd -
	rm -Rf openocd.git
}

function set_permission() {
	cat << EOF | sudo tee /etc/udev/rules.d/10-local.rules > /dev/null
ATTR{idVendor}=="15ba", ATTR{idProduct}=="0004", GROUP="plugdev", MODE="0660" # Olimex Ltd. OpenOCD JTAG TINY
ATTR{idVendor}=="067b", ATTR{idProduct}=="2303", GROUP="plugdev", MODE="0660" # Prolific Technology, Inc. PL2303 Serial Port
ATTR{idVendor}=="10c4", ATTR{idProduct}=="ea60", GROUP="plugdev", MODE="0660" # USB Serial
ATTR{idVendor}=="1cbe", ATTR{idProduct}=="00fd", GROUP="plugdev", MODE="0660" # TI Stellaris Launchpad
EOF
	sudo usermod -a -G plugdev,dialout $USER
	sudo udevadm control --reload-rules
}


function install_samples() {
	git clone https://github.com/jkramarz/SW-EK-LM4F120XL.git $HOME/workspace-stellaris
	cd $HOME/workspace-stellaris/driverlib/
	make clean
	make
	cd ../boards/ek-lm4f120xl/project0/
	make
	lm4flash gcc/project0.bin
}

sudo yum install git wget

install_gcc_arm_embedded
install_lm4tools
install_openocd
set_permission
install_samples

echo "Please use 'newgrp plugdev' or log-out and log-in again"

Line 53 is not accessible anymore :

https://github.com/jkramarz/SW-EK-LM4F120XL.git