Installing gcc-7 & g++-7 in Ubuntu 16.04LTS Xenial

Install_gcc7_ubuntu_16.04.md

Run the following in the terminal:

Install the gcc-7 packages:

sudo apt-get install -y software-properties-common
sudo add-apt-repository ppa:ubuntu-toolchain-r/test
sudo apt update
sudo apt install g++-7 -y

Set it up so the symbolic links gcc, g++ point to the newer version:

sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-7 60 \
                         --slave /usr/bin/g++ g++ /usr/bin/g++-7 
sudo update-alternatives --config gcc
gcc --version
g++ --version

# This one if you want the **all** toolchain programs (with the triplet names) to also point to gcc-7. 
# For example, this is needed if building Debian packages.
# If you are already are root (e.g. inside a docker image), remove the "sudo" below.
ls -la /usr/bin/ | grep -oP "[\S]*(gcc|g\+\+)(-[a-z]+)*[\s]" | xargs sudo bash -c 'for link in ${@:1}; do ln -s -f "/usr/bin/${link}-${0}" "/usr/bin/${link}"; done' 7

Regarding switching gcc and g++ to reference the newly installed binary (gcc-8 in my case), this was helpful for me: https://askubuntu.com/a/26518/606179

Thanks for all of your answers. I have tried to install gcc-7.3 with the following commands. But I still get gcc 7.4.0. Can you provide a method only to install gcc 7.3.0?

$ sudo add-apt-repository ppa:jonathonf/gcc-7.3
$ sudo apt-get update
$ sudo apt-get install gcc-7 g++-7
$ sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-7 60 --slave /usr/bin/g++ g++ /usr/bin/g++-7

After completion of the installation, I input the command of gcc --version and get the version of gcc 7.4.0.

Please see the message as follows

gcc ubuntu (Ubuntu 7.4.0-1ubuntu1~18.04) 7.4.0
............................................................................

I have Nvidia GeForce RTX 2060 which driver not supports gcc 7.4.0 but gcc 7.3.0. Please help me figure out the issue.

Note：

I also used the following commands to get gcc 7.4.0 rather than 7.3.0. So it is problem to install gcc 7.3.0.

$ sudo apt install build-essential
or
$ sudo apt install gcc

Thanks in advance,

Mike

have you solved the issue above? I am trying to install rtx 2080 ti and nvidia driver also shows cc version check failure. I have to install gcc 7.3. instead of 7.4 but I dont know how

This works perfect to install gcc and g++ 7.4.0

Thanks!

Thanks! It worked and only got an error for g++
update-alternatives: error: alternative g++ can't be slave of gcc: it is a master alternative.
Need to configure gcc and g++ separately (https://askubuntu.com/questions/26498/how-to-choose-the-default-gcc-and-g-version)

I tried the listed steps but I got an error for adding ppa:
when I ran:
sudo add-apt-repository ppa:ubuntu-toolchain-r/test
I get

gpg: keyring /tmp/tmpir2cfkik/secring.gpg' created
gpg: keyring /tmp/tmpir2cfkik/pubring.gpg' created
gpg: requesting key BA9EF27F from hkp server keyserver.ubuntu.com
Error: retrieving gpg key timed out.
gpg: keyserver timed out
gpg: keyserver receive failed: keyserver error

I tried this but got the same error:
sudo add-apt-repository ppa:ubuntu-toolchain-r/ppa
Here is my linux distribution and kernel version:
Linux amax 4.15.0-45-generic #48~16.04.1-Ubuntu SMP Tue Jan 29 18:03:48 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
Can anyone help with it?

FYI my docker version

FROM ubuntu:16.04 
...
# Install gcc 7
RUN apt update -qq \
&& apt install -yq software-properties-common \
&& add-apt-repository -y ppa:ubuntu-toolchain-r/test \
&& apt update -qq \
&& apt install -yq g++-7 \
&& apt clean \
&& rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/*
# Configure alias
RUN update-alternatives \
 --install /usr/bin/gcc gcc /usr/bin/gcc-7 60 \
 --slave /usr/bin/g++ g++ /usr/bin/g++-7 \
 --slave /usr/bin/gcov gcov /usr/bin/gcov-7 \
 --slave /usr/bin/gcov-tool gcov-tool /usr/bin/gcov-tool-7 \
 --slave /usr/bin/gcc-ar gcc-ar /usr/bin/gcc-ar-7 \
 --slave /usr/bin/gcc-nm gcc-nm /usr/bin/gcc-nm-7 \
 --slave /usr/bin/gcc-ranlib gcc-ranlib /usr/bin/gcc-ranlib-7

with:

• -y : auto confirm
• -q: quiet mode (several increase quiet level)

don't forget to update this executable:

update-alternatives --install /usr/bin/x86_64-linux-gnu-gcc x86_64-linux-gnu-gcc /usr/bin/x86_64-linux-gnu-gcc-7