How to use assertions with Arduino.

assert.ino

#define __ASSERT_USE_STDERR

#include <assert.h>

// Pin 13 has an LED connected on most Arduino boards.
// give it a name:
int led = 13;

// the setup routine runs once when you press reset:
void setup() {                
    // initialize the digital pin as an output.
    pinMode(led, OUTPUT);    

    // initialize serial communication at 9600 bits per second.
    Serial.begin(9600);  
}

// the loop routine runs over and over again forever:
void loop() {
    for (uint8_t i = 0; i < 3; i++) {
        digitalWrite(led, HIGH);   // turn the LED on (HIGH is the voltage level)
        delay(1000);               // wait for a second
        digitalWrite(led, LOW);    // turn the LED off by making the voltage LOW
        delay(1000);               // wait for a second
    }

    // make assertion failed.
    assert(false);
}

// handle diagnostic informations given by assertion and abort program execution:
void __assert(const char *__func, const char *__file, int __lineno, const char *__sexp) {
    // transmit diagnostic informations through serial link. 
    Serial.println(__func);
    Serial.println(__file);
    Serial.println(__lineno, DEC);
    Serial.println(__sexp);
    Serial.flush();
    // abort program execution.
    abort();
}

I know this post is many years old, but since it still comes up widely via google search, I figured I'd point out a gotcha that tripped me up at first: This only works if Serial.begin has been called - if you attempt an assert prior to that, it doesn't work. This makes it somewhat less useful as a general purpose assert function.

Unfortunately, it doesn't work on Arduino DUE : __assert() function isn't called and I get the standard error message instead :

assertion "false" failed: file "/assert.ino", line 31, function: void loop()
Exiting with status 1.

Do you have any idea why it doesn't work on Arduino DUE ? (However I successfully tested it on Arduino MEGA by the way)

Try to use this code. Presume it will help.

#include <assert.h>

// Pin 13 has an LED connected on most Arduino boards.
// give it a name:
int led = 13;

// the setup routine runs once when you press reset:
void setup() {                
    // initialize the digital pin as an output.
    pinMode(led, OUTPUT);    

    // initialize serial communication at 9600 bits per second.
    Serial.begin(9600);  
}

// the loop routine runs over and over again forever:
void loop() {
    for (uint8_t i = 0; i < 3; i++) {
        digitalWrite(led, HIGH);   // turn the LED on (HIGH is the voltage level)
        delay(1000);               // wait for a second
        digitalWrite(led, LOW);    // turn the LED off by making the voltage LOW
        delay(1000);               // wait for a second
    }

    // make assertion failed.
    assert(false);
}

// handle diagnostic informations given by assertion and abort program execution:
void __assert_func(const char *__file, int __lineno, const char *__func, const char *__sexp) {
    // transmit diagnostic informations through serial link. 
    Serial.println(__func);
    Serial.println(__file);
    Serial.println(__lineno, DEC);
    Serial.println(__sexp);
    Serial.flush();
    // abort program execution.
    abort();
}