Skip to content

Instantly share code, notes, and snippets.

@jmccrohan

jmccrohan/WNR3500L

Created January 27, 2013 15:57
Show Gist options
  • Save jmccrohan/4648969 to your computer and use it in GitHub Desktop.
Save jmccrohan/4648969 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
WNR3500L
Decompressing..........done
CFE for WNR3500L version: v1.0.36
Build Date: Tue Aug 11 15:09:14 CST 2009
Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
Found a 8MB ST compatible serial flash
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.10.56.28
CPU type 0x19740: 453MHz
Tot mem: 65536 KBytes
Device eth0: hwaddr C0-3F-0E-C3-60-70, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Checksum mismatch:
Image chksum: 0xFFFFFFFF
Calc chksum: 0x02C0010E
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 3780 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
[ 0.000000] Linux version 3.6.11 (jmccrohan@lambda) (gcc version 4.6.4 20121210 (prerelease) (Linaro GCC 4.6-2012.12) ) #1 Sun Jan 27 03:43:35 GMT 2013
[ 0.000000] CPU revision is: 00019740 (MIPS 74Kc)
[ 0.000000] bcm47xx: using bcma bus
[ 0.000000] bcma: bus0: Found chip with id 0x4716, rev 0x01 and package 0x0A
[ 0.000000] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x1F, class 0x0)
[ 0.000000] bcma: bus0: Core 3 found: MIPS 74K (manuf 0x4A7, id 0x82C, rev 0x01, class 0x0)
[ 0.000000] bus0: Found M25P64 serial flash (size: 8192KiB, blocksize: 0x10000, blocks: 128)
[ 0.000000] bcma: bus0: Early bus registered
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x03ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 61548k/65536k available (2436k kernel code, 3988k reserved, 524k data, 164k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.032000] Calibrating delay loop... 225.02 BogoMIPS (lpj=450048)
[ 0.032000] pid_max: default: 32768 minimum: 301
[ 0.036000] Mount-cache hash table entries: 512
[ 0.036000] NET: Registered protocol family 16
[ 0.056000] bio: create slab <bio-0> at 0
[ 0.064000] Switching to clocksource MIPS
[ 0.072000] NET: Registered protocol family 2
[ 0.072000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.072000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.072000] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.072000] TCP: reno registered
[ 0.072000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.072000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.072000] NET: Registered protocol family 1
[ 0.076000] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x11, class 0x0)
[ 0.076000] bcma: bus0: Core 2 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x00, class 0x0)
[ 0.076000] bcma: bus0: Core 4 found: USB 2.0 Host (manuf 0x4BF, id 0x819, rev 0x04, class 0x0)
[ 0.076000] bcma: bus0: Core 5 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0E, class 0x0)
[ 0.076000] bcma: bus0: Core 6 found: DDR1/DDR2 Memory Controller (manuf 0x4BF, id 0x82E, rev 0x01, class 0x0)
[ 0.076000] bcma: bus0: Core 7 found: Internal Memory (manuf 0x4BF, id 0x80E, rev 0x07, class 0x0)
[ 0.076000] bcma: bus0: Core 8 found: I2S (manuf 0x4BF, id 0x834, rev 0x00, class 0x0)
[ 0.104000] bcma: bus0: Moved i2s interrupt to oob line 7 instead of 8
[ 0.104000] bcma: bus0: PCIEcore in host mode found
[ 0.104000] bcma: bus0: This PCIE core is disabled and not working
[ 0.108000] bcma: bus0: Bus registered
[ 0.112000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.112000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.112000] msgmni has been set to 120
[ 0.112000] io scheduler noop registered
[ 0.112000] io scheduler deadline registered (default)
[ 0.112000] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
[ 0.136000] serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 2) is a U6_16550A
[ 0.508000] console [ttyS0] enabled
[ 0.516000] bcm47xx_sflash: found serial flash: blocksize=64KB, numblocks=128, size=8192KB
[ 0.528000] bcm47xx_part: bootloader size: 262144
[ 0.532000] bcm47xx_part: Looking for dual image
[ 0.536000] bcm47xx_part: TRX offset : 0
[ 0.540000] 5 bcm47xx partitions found on MTD device bcm47xx-sflash
[ 0.548000] Creating 5 MTD partitions on "bcm47xx-sflash":
[ 0.552000] 0x000000000000-0x000000040000 : "cfe"
[ 0.560000] 0x000000040000-0x0000007e0000 : "linux"
[ 0.568000] 0x000000139c00-0x0000007e0000 : "rootfs"
[ 0.576000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.592000] mtd: partition "rootfs" set to be root filesystem
[ 0.596000] mtd: partition "rootfs_data" created automatically, ofs=500000, len=2E0000
[ 0.604000] 0x000000500000-0x0000007e0000 : "rootfs_data"
[ 0.612000] 0x0000007f0000-0x000000800000 : "nvram"
[ 0.620000] 0x0000007e0000-0x0000007f0000 : "board_data"
[ 0.632000] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds)
[ 0.640000] TCP: cubic registered
[ 0.644000] NET: Registered protocol family 17
[ 0.648000] 8021q: 802.1Q VLAN Support v1.8
[ 0.664000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.672000] Freeing unused kernel memory: 164k freed
[ 3.020000] diag: Router model not detected.
[ 3.148000] bgmac bcma0:1: Found PHY addr: 30 (NOREGS)
[ 3.156000] bgmac bcma0:1: Support for Roboswitch not implemented
[ 3.184000] bgmac: Broadcom 47xx GBit MAC driver loaded
[ 3.264000] roboswitch: Probing device 'eth0'
[ 3.272000] roboswitch: found a 53115! It's a 5350. at eth0
[ 6.560000] diag: Router model not detected.
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
[ 10.212000] jffs2: notice: (322) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 11 of xref (0 dead, 3 orphan) found.
switching to jffs2
- init -
Please press Enter to activate this console. [ 13.384000] Compat-drivers backport release: compat-drivers-2013-01-08-3
[ 13.392000] Backport based on wireless-testing.git master-2013-01-07
[ 13.396000] compat.git: wireless-testing.git
[ 13.592000] cfg80211: Calling CRDA to update world regulatory domain
[ 13.596000] cfg80211: World regulatory domain updated:
[ 13.604000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.612000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.620000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.628000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.636000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.644000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.980000] NET: Registered protocol family 10
[ 14.752000] b43-phy0: Broadcom 4716 WLAN found (core revision 17)
[ 14.760000] b43-phy0: Found PHY: Analog 8, Type 4 (N), Revision 5
[ 14.768000] Broadcom 43xx driver loaded [ Features: PNL ]
[ 15.096000] PPP generic driver version 2.4.2
[ 15.140000] tun: Universal TUN/TAP device driver, 1.6
[ 15.148000] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 15.388000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.672000] NET: Registered protocol family 24
[ 15.704000] nf_conntrack version 0.5.0 (964 buckets, 3856 max)
[ 16.176000] xt_time: kernel timezone is -0000
[ 16.424000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 16.916000] u32 classifier
[ 16.920000] Performance counters on
[ 16.924000] input device check on
[ 16.928000] Actions configured
[ 17.064000] Mirror/redirect action on
[ 20.616000] device eth0.0 entered promiscuous mode
[ 20.620000] device eth0 entered promiscuous mode
[ 20.632000] br-lan: port 1(eth0.0) entered forwarding state
[ 20.636000] br-lan: port 1(eth0.0) entered forwarding state
[ 21.072000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.0: link becomes ready
[ 22.640000] br-lan: port 1(eth0.0) entered forwarding state
BusyBox v1.19.4 (2013-01-27 03:20:57 GMT) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
BARRIER BREAKER (Bleeding Edge, r35323)
-----------------------------------------------------
* 1/2 oz Galliano Pour all ingredients into
* 4 oz cold Coffee an irish coffee mug filled
* 1 1/2 oz Dark Rum with crushed ice. Stir.
* 2 tsp. Creme de Cacao
-----------------------------------------------------
root@OpenWrt:/# dmesg
[ 0.000000] Linux version 3.6.11 (jmccrohan@lambda) (gcc version 4.6.4 20121210 (prerelease) (Linaro GCC 4.6-2012.12) ) #1 Sun Jan 27 03:43:35 GMT 2013
[ 0.000000] CPU revision is: 00019740 (MIPS 74Kc)
[ 0.000000] bcm47xx: using bcma bus
[ 0.000000] bcma: bus0: Found chip with id 0x4716, rev 0x01 and package 0x0A
[ 0.000000] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x1F, class 0x0)
[ 0.000000] bcma: bus0: Core 3 found: MIPS 74K (manuf 0x4A7, id 0x82C, rev 0x01, class 0x0)
[ 0.000000] bcma: bus0: Found rev 5 PMU (capabilities 0x11242C05)
[ 0.000000] bcma: bus0: Found serial flash
[ 0.000000] bus0: Found M25P64 serial flash (size: 8192KiB, blocksize: 0x10000, blocks: 128)
[ 0.000000] bcma: bus0: Early bus registered
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x03ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
[ 0.000000] On node 0 totalpages: 16384
[ 0.000000] free_area_init_node: node 0, pgdat 802e4ac0, node_mem_map 81000000
[ 0.000000] Normal zone: 128 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16256 pages, LIFO batch:3
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 61548k/65536k available (2436k kernel code, 3988k reserved, 524k data, 164k init, 0k highmem)
[ 0.000000] NR_IRQS:128
[ 0.032000] Calibrating delay loop... 225.02 BogoMIPS (lpj=450048)
[ 0.032000] pid_max: default: 32768 minimum: 301
[ 0.036000] Mount-cache hash table entries: 512
[ 0.036000] NET: Registered protocol family 16
[ 0.056000] bio: create slab <bio-0> at 0
[ 0.064000] Switching to clocksource MIPS
[ 0.072000] NET: Registered protocol family 2
[ 0.072000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.072000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.072000] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.072000] TCP: reno registered
[ 0.072000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.072000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.072000] NET: Registered protocol family 1
[ 0.072000] PCI: CLS 0 bytes, default 32
[ 0.076000] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x11, class 0x0)
[ 0.076000] bcma: bus0: Core 2 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x00, class 0x0)
[ 0.076000] bcma: bus0: Core 4 found: USB 2.0 Host (manuf 0x4BF, id 0x819, rev 0x04, class 0x0)
[ 0.076000] bcma: bus0: Core 5 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0E, class 0x0)
[ 0.076000] bcma: bus0: Core 6 found: DDR1/DDR2 Memory Controller (manuf 0x4BF, id 0x82E, rev 0x01, class 0x0)
[ 0.076000] bcma: bus0: Core 7 found: Internal Memory (manuf 0x4BF, id 0x80E, rev 0x07, class 0x0)
[ 0.076000] bcma: bus0: Core 8 found: I2S (manuf 0x4BF, id 0x834, rev 0x00, class 0x0)
[ 0.100000] bcma: bus0: Using SPROM revision 8 provided by platform.
[ 0.100000] bcma: bus0: PMU resource config unknown or not needed for device 0x4716
[ 0.104000] bcma: bus0: Workarounds unknown or not needed for device 0x4716
[ 0.104000] bcma: bus0: Initializing MIPS core...
[ 0.104000] bcma: bus0: Moved i2s interrupt to oob line 7 instead of 8
[ 0.104000] bcma: bus0: set_irq: core 0x0812, irq 3 => 3
[ 0.104000] bcma: bus0: set_irq: core 0x082d, irq 4 => 4
[ 0.104000] bcma: bus0: set_irq: core 0x0819, irq 5 => 5
[ 0.104000] bcma: bus0: set_irq: core 0x0820, irq 6 => 6
[ 0.104000] bcma: bus0: set_irq: core 0x0800, irq 2 => 2
[ 0.104000] bcma: bus0: set_irq: core 0x0834, irq 0 => 2
[ 0.104000] bcma: bus0: IRQ reconfiguration done
[ 0.104000] bcma: core 0x0800, irq : 2(S)* 3 4 5 6 D I
[ 0.104000] bcma: core 0x082c, irq : 2(S) 3 4 5 6 D I*
[ 0.104000] bcma: core 0x0812, irq : 2(S) 3* 4 5 6 D I
[ 0.104000] bcma: core 0x082d, irq : 2(S) 3 4* 5 6 D I
[ 0.104000] bcma: core 0x0819, irq : 2(S) 3 4 5* 6 D I
[ 0.104000] bcma: core 0x0820, irq : 2(S) 3 4 5 6* D I
[ 0.104000] bcma: core 0x082e, irq : 2(S) 3 4 5 6 D* I
[ 0.104000] bcma: core 0x080e, irq : 2(S) 3 4 5 6 D I*
[ 0.104000] bcma: core 0x0834, irq : 2(S)* 3 4 5 6 D I
[ 0.104000] bcma: bus0: PCIEcore in host mode found
[ 0.104000] bcma: bus0: This PCIE core is disabled and not working
[ 0.108000] bcma: bus0: Bus registered
[ 0.112000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.112000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.112000] msgmni has been set to 120
[ 0.112000] io scheduler noop registered
[ 0.112000] io scheduler deadline registered (default)
[ 0.112000] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
[ 0.136000] serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 2) is a U6_16550A
[ 0.508000] console [ttyS0] enabled
[ 0.516000] bcm47xx_sflash: found serial flash: blocksize=64KB, numblocks=128, size=8192KB
[ 0.528000] bcm47xx_part: bootloader size: 262144
[ 0.532000] bcm47xx_part: Looking for dual image
[ 0.536000] bcm47xx_part: TRX offset : 0
[ 0.540000] 5 bcm47xx partitions found on MTD device bcm47xx-sflash
[ 0.548000] Creating 5 MTD partitions on "bcm47xx-sflash":
[ 0.552000] 0x000000000000-0x000000040000 : "cfe"
[ 0.560000] 0x000000040000-0x0000007e0000 : "linux"
[ 0.568000] 0x000000139c00-0x0000007e0000 : "rootfs"
[ 0.576000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.592000] mtd: partition "rootfs" set to be root filesystem
[ 0.596000] mtd: partition "rootfs_data" created automatically, ofs=500000, len=2E0000
[ 0.604000] 0x000000500000-0x0000007e0000 : "rootfs_data"
[ 0.612000] 0x0000007f0000-0x000000800000 : "nvram"
[ 0.620000] 0x0000007e0000-0x0000007f0000 : "board_data"
[ 0.632000] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds)
[ 0.640000] TCP: cubic registered
[ 0.644000] NET: Registered protocol family 17
[ 0.648000] 8021q: 802.1Q VLAN Support v1.8
[ 0.664000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.672000] Freeing unused kernel memory: 164k freed
[ 3.020000] diag: Router model not detected.
[ 3.148000] bgmac bcma0:1: Found PHY addr: 30 (NOREGS)
[ 3.156000] bgmac bcma0:1: Support for Roboswitch not implemented
[ 3.184000] bgmac: Broadcom 47xx GBit MAC driver loaded
[ 3.264000] roboswitch: Probing device 'eth0'
[ 3.272000] roboswitch: found a 53115! It's a 5350. at eth0
[ 6.560000] diag: Router model not detected.
[ 10.212000] jffs2: notice: (322) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 11 of xref (0 dead, 3 orphan) found.
[ 13.384000] Compat-drivers backport release: compat-drivers-2013-01-08-3
[ 13.392000] Backport based on wireless-testing.git master-2013-01-07
[ 13.396000] compat.git: wireless-testing.git
[ 13.592000] cfg80211: Calling CRDA to update world regulatory domain
[ 13.596000] cfg80211: World regulatory domain updated:
[ 13.604000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.612000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.620000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.628000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.636000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.644000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.980000] NET: Registered protocol family 10
[ 14.752000] b43-phy0: Broadcom 4716 WLAN found (core revision 17)
[ 14.760000] b43-phy0: Found PHY: Analog 8, Type 4 (N), Revision 5
[ 14.768000] Broadcom 43xx driver loaded [ Features: PNL ]
[ 15.060000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 15.064000] Registered led device: b43-phy0::tx
[ 15.064000] Registered led device: b43-phy0::rx
[ 15.096000] PPP generic driver version 2.4.2
[ 15.140000] tun: Universal TUN/TAP device driver, 1.6
[ 15.148000] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 15.388000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.672000] NET: Registered protocol family 24
[ 15.704000] nf_conntrack version 0.5.0 (964 buckets, 3856 max)
[ 16.176000] xt_time: kernel timezone is -0000
[ 16.424000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 16.916000] u32 classifier
[ 16.920000] Performance counters on
[ 16.924000] input device check on
[ 16.928000] Actions configured
[ 17.064000] Mirror/redirect action on
[ 20.616000] device eth0.0 entered promiscuous mode
[ 20.620000] device eth0 entered promiscuous mode
[ 20.632000] br-lan: port 1(eth0.0) entered forwarding state
[ 20.636000] br-lan: port 1(eth0.0) entered forwarding state
[ 21.072000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.0: link becomes ready
[ 22.640000] br-lan: port 1(eth0.0) entered forwarding state
root@OpenWrt:/# logread
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 0.032000] Calibrating delay loop... 225.02 BogoMIPS (lpj=450048)
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 0.032000] pid_max: default: 32768 minimum: 301
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 0.036000] Mount-cache hash table entries: 512
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 0.036000] NET: Registered protocol family 16
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 0.056000] bio: create slab <bio-0> at 0
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 0.064000] Switching to clocksource MIPS
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 0.072000] NET: Registered protocol family 2
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 0.072000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 0.072000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 0.072000] TCP: Hash tables configured (established 2048 bind 2048)
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 0.072000] TCP: reno registered
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 0.072000] UDP hash table entries: 256 (order: 0, 4096 bytes)
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 0.072000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 0.072000] NET: Registered protocol family 1
Sep 8 16:10:05 OpenWrt kern.debug kernel: [ 0.072000] PCI: CLS 0 bytes, default 32
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 0.076000] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x11, class 0x0)
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 0.076000] bcma: bus0: Core 2 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x00, class 0x0)
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 0.076000] bcma: bus0: Core 4 found: USB 2.0 Host (manuf 0x4BF, id 0x819, rev 0x04, class 0x0)
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 0.076000] bcma: bus0: Core 5 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0E, class 0x0)
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 0.076000] bcma: bus0: Core 6 found: DDR1/DDR2 Memory Controller (manuf 0x4BF, id 0x82E, rev 0x01, class 0x0)
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 0.076000] bcma: bus0: Core 7 found: Internal Memory (manuf 0x4BF, id 0x80E, rev 0x07, class 0x0)
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 0.076000] bcma: bus0: Core 8 found: I2S (manuf 0x4BF, id 0x834, rev 0x00, class 0x0)
Sep 8 16:10:05 OpenWrt kern.debug kernel: [ 0.100000] bcma: bus0: Using SPROM revision 8 provided by platform.
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 0.104000] bcma: bus0: Moved i2s interrupt to oob line 7 instead of 8
Sep 8 16:10:05 OpenWrt kern.debug kernel: [ 0.104000] bcma: bus0: set_irq: core 0x0812, irq 3 => 3
Sep 8 16:10:05 OpenWrt kern.debug kernel: [ 0.104000] bcma: bus0: set_irq: core 0x082d, irq 4 => 4
Sep 8 16:10:05 OpenWrt kern.debug kernel: [ 0.104000] bcma: bus0: set_irq: core 0x0819, irq 5 => 5
Sep 8 16:10:05 OpenWrt kern.debug kernel: [ 0.104000] bcma: bus0: set_irq: core 0x0820, irq 6 => 6
Sep 8 16:10:05 OpenWrt kern.debug kernel: [ 0.104000] bcma: bus0: set_irq: core 0x0800, irq 2 => 2
Sep 8 16:10:05 OpenWrt kern.debug kernel: [ 0.104000] bcma: bus0: set_irq: core 0x0834, irq 0 => 2
Sep 8 16:10:05 OpenWrt kern.debug kernel: [ 0.104000] bcma: bus0: IRQ reconfiguration done
Sep 8 16:10:05 OpenWrt kern.debug kernel: [ 0.104000] bcma: core 0x0800, irq : 2(S)* 3 4 5 6 D I
Sep 8 16:10:05 OpenWrt kern.debug kernel: [ 0.104000] bcma: core 0x082c, irq : 2(S) 3 4 5 6 D I*
Sep 8 16:10:05 OpenWrt kern.debug kernel: [ 0.104000] bcma: core 0x0812, irq : 2(S) 3* 4 5 6 D I
Sep 8 16:10:05 OpenWrt kern.debug kernel: [ 0.104000] bcma: core 0x082d, irq : 2(S) 3 4* 5 6 D I
Sep 8 16:10:05 OpenWrt kern.debug kernel: [ 0.104000] bcma: core 0x0819, irq : 2(S) 3 4 5* 6 D I
Sep 8 16:10:05 OpenWrt kern.debug kernel: [ 0.104000] bcma: core 0x0820, irq : 2(S) 3 4 5 6* D I
Sep 8 16:10:05 OpenWrt kern.debug kernel: [ 0.104000] bcma: core 0x082e, irq : 2(S) 3 4 5 6 D* I
Sep 8 16:10:05 OpenWrt kern.debug kernel: [ 0.104000] bcma: core 0x080e, irq : 2(S) 3 4 5 6 D I*
Sep 8 16:10:05 OpenWrt kern.debug kernel: [ 0.104000] bcma: core 0x0834, irq : 2(S)* 3 4 5 6 D I
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 0.104000] bcma: bus0: PCIEcore in host mode found
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 0.104000] bcma: bus0: This PCIE core is disabled and not working
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 0.108000] bcma: bus0: Bus registered
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 0.112000] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 0.136000] serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 2) is a U6_16550A
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 0.508000] console [ttyS0] enabled
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 0.516000] bcm47xx_sflash: found serial flash: blocksize=64KB, numblocks=128, size=8192KB
Sep 8 16:10:05 OpenWrt kern.notice kernel: [ 0.528000] bcm47xx_part: bootloader size: 262144
Sep 8 16:10:05 OpenWrt kern.notice kernel: [ 0.532000] bcm47xx_part: Looking for dual image
Sep 8 16:10:05 OpenWrt kern.notice kernel: [ 0.536000] bcm47xx_part: TRX offset : 0
Sep 8 16:10:05 OpenWrt kern.notice kernel: [ 0.540000] 5 bcm47xx partitions found on MTD device bcm47xx-sflash
Sep 8 16:10:05 OpenWrt kern.notice kernel: [ 0.548000] Creating 5 MTD partitions on "bcm47xx-sflash":
Sep 8 16:10:05 OpenWrt kern.notice kernel: [ 0.552000] 0x000000000000-0x000000040000 : "cfe"
Sep 8 16:10:05 OpenWrt kern.notice kernel: [ 0.560000] 0x000000040000-0x0000007e0000 : "linux"
Sep 8 16:10:05 OpenWrt kern.notice kernel: [ 0.568000] 0x000000139c00-0x0000007e0000 : "rootfs"
Sep 8 16:10:05 OpenWrt kern.warn kernel: [ 0.576000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
Sep 8 16:10:05 OpenWrt kern.notice kernel: [ 0.592000] mtd: partition "rootfs" set to be root filesystem
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 0.596000] mtd: partition "rootfs_data" created automatically, ofs=500000, len=2E0000
Sep 8 16:10:05 OpenWrt kern.notice kernel: [ 0.604000] 0x000000500000-0x0000007e0000 : "rootfs_data"
Sep 8 16:10:05 OpenWrt kern.notice kernel: [ 0.612000] 0x0000007f0000-0x000000800000 : "nvram"
Sep 8 16:10:05 OpenWrt kern.notice kernel: [ 0.620000] 0x0000007e0000-0x0000007f0000 : "board_data"
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 0.632000] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds)
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 0.640000] TCP: cubic registered
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 3.148000] bgmac bcma0:1: Found PHY addr: 30 (NOREGS)
Sep 8 16:10:05 OpenWrt kern.warn kernel: [ 3.156000] bgmac bcma0:1: Support for Roboswitch not implemented
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 3.184000] bgmac: Broadcom 47xx GBit MAC driver loaded
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 3.264000] roboswitch: Probing device 'eth0'
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 3.272000] roboswitch: found a 53115! It's a 5350. at eth0
Sep 8 16:10:05 OpenWrt kern.warn kernel: [ 6.560000] diag: Router model not detected.
Sep 8 16:10:05 OpenWrt kern.notice kernel: [ 10.212000] jffs2: notice: (322) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 11 of xref (0 dead, 3 orphan) found.
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 13.384000] Compat-drivers backport release: compat-drivers-2013-01-08-3
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 13.392000] Backport based on wireless-testing.git master-2013-01-07
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 13.396000] compat.git: wireless-testing.git
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 13.592000] cfg80211: Calling CRDA to update world regulatory domain
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 13.596000] cfg80211: World regulatory domain updated:
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 13.604000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 13.612000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 13.620000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 13.628000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 13.636000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 13.644000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 13.980000] NET: Registered protocol family 10
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 14.752000] b43-phy0: Broadcom 4716 WLAN found (core revision 17)
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 14.760000] b43-phy0: Found PHY: Analog 8, Type 4 (N), Revision 5
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 14.768000] Broadcom 43xx driver loaded [ Features: PNL ]
Sep 8 16:10:05 OpenWrt kern.debug kernel: [ 15.060000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Sep 8 16:10:05 OpenWrt kern.debug kernel: [ 15.064000] Registered led device: b43-phy0::tx
Sep 8 16:10:05 OpenWrt kern.debug kernel: [ 15.064000] Registered led device: b43-phy0::rx
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 15.096000] PPP generic driver version 2.4.2
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 15.140000] tun: Universal TUN/TAP device driver, 1.6
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 15.148000] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 15.388000] ip_tables: (C) 2000-2006 Netfilter Core Team
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 15.672000] NET: Registered protocol family 24
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 15.704000] nf_conntrack version 0.5.0 (964 buckets, 3856 max)
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 16.176000] xt_time: kernel timezone is -0000
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 16.424000] ip6_tables: (C) 2000-2006 Netfilter Core Team
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 16.916000] u32 classifier
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 16.920000] Performance counters on
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 16.924000] input device check on
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 16.928000] Actions configured
Sep 8 16:10:05 OpenWrt kern.info kernel: [ 17.064000] Mirror/redirect action on
Sep 8 16:10:07 OpenWrt kern.info kernel: [ 20.616000] device eth0.0 entered promiscuous mode
Sep 8 16:10:07 OpenWrt kern.info kernel: [ 20.620000] device eth0 entered promiscuous mode
Sep 8 16:10:07 OpenWrt kern.info kernel: [ 20.632000] br-lan: port 1(eth0.0) entered forwarding state
Sep 8 16:10:07 OpenWrt kern.info kernel: [ 20.636000] br-lan: port 1(eth0.0) entered forwarding state
Sep 8 16:10:07 OpenWrt daemon.notice netifd: Interface 'lan' is now up
Sep 8 16:10:07 OpenWrt daemon.notice netifd: Interface 'loopback' is now up
Sep 8 16:10:08 OpenWrt kern.info kernel: [ 21.072000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.0: link becomes ready
Sep 8 16:10:08 OpenWrt daemon.notice netifd: wan (574): udhcpc (v1.19.4) started
Sep 8 16:10:08 OpenWrt daemon.notice netifd: wan (574): Sending discover...
Sep 8 16:10:09 OpenWrt kern.info kernel: [ 22.640000] br-lan: port 1(eth0.0) entered forwarding state
Sep 8 16:10:11 OpenWrt daemon.notice netifd: wan (574): Sending discover...
Sep 8 16:10:12 OpenWrt user.info sysinit: 'radio0' is disabled
Sep 8 16:10:12 OpenWrt user.info sysinit: 'radio0' is disabled
Sep 8 16:10:13 OpenWrt user.info sysinit: 'radio0' is disabled
Sep 8 16:10:14 OpenWrt daemon.notice netifd: wan (574): Sending discover...
Sep 8 16:10:15 OpenWrt user.info sysinit: Loading defaults
Sep 8 16:10:15 OpenWrt user.info sysinit: Loading synflood protection
Sep 8 16:10:15 OpenWrt user.info sysinit: Adding custom chains
Sep 8 16:10:16 OpenWrt user.info sysinit: Loading zones
Sep 8 16:10:17 OpenWrt user.info sysinit: Loading forwardings
Sep 8 16:10:18 OpenWrt user.info sysinit: Loading rules
Sep 8 16:10:18 OpenWrt user.info sysinit: Loading redirects
Sep 8 16:10:18 OpenWrt user.info sysinit: Loading includes
Sep 8 16:10:19 OpenWrt user.info sysinit: Optimizing conntrack
Sep 8 16:10:19 OpenWrt user.info sysinit: Loading interfaces
Sep 8 16:10:19 OpenWrt user.info firewall: adding lan (br-lan) to zone lan
Sep 8 16:10:20 OpenWrt authpriv.info dropbear[991]: Not backgrounding
Sep 8 16:10:24 OpenWrt user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Sep 8 16:10:24 OpenWrt user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Sep 8 16:10:27 OpenWrt daemon.info init: starting pid 348, tty '/dev/ttyS0': '/bin/ash --login'
Sep 8 16:10:27 OpenWrt daemon.info dnsmasq[1127]: started, version 2.62 cachesize 150
Sep 8 16:10:27 OpenWrt daemon.info dnsmasq[1127]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack
Sep 8 16:10:27 OpenWrt daemon.info dnsmasq-dhcp[1127]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Sep 8 16:10:27 OpenWrt daemon.info dnsmasq[1127]: using local addresses only for domain lan
Sep 8 16:10:27 OpenWrt daemon.warn dnsmasq[1127]: no servers found in /tmp/resolv.conf.auto, will retry
Sep 8 16:10:27 OpenWrt daemon.info dnsmasq[1127]: read /etc/hosts - 1 addresses
Sep 8 16:10:27 OpenWrt daemon.info dnsmasq-dhcp[1127]: read /etc/ethers - 0 addresses
Sep 8 16:10:28 OpenWrt user.info sysinit: configfile: stat (/etc/collectd/conf.d) failed: No such file or directory
Sep 8 16:10:29 OpenWrt user.info sysinit: Could not find plugin iptables.
Sep 8 16:10:29 OpenWrt user.info sysinit: Could not find plugin conntrack.
Sep 8 16:10:29 OpenWrt user.info sysinit: Could not find plugin tcpconns.
Sep 8 16:10:29 OpenWrt user.info sysinit: Found a configuration for the `tcpconns' plugin, but the plugin isn't loaded or didn't register a configuration callback.
Sep 8 16:10:29 OpenWrt user.info sysinit: Found a configuration for the `tcpconns' plugin, but the plugin isn't loaded or didn't register a configuration callback.
Sep 8 16:10:29 OpenWrt user.info sysinit: Found a configuration for the `tcpconns' plugin, but the plugin isn't loaded or didn't register a configuration callback.
Sep 8 16:10:29 OpenWrt user.info sysinit: rrdtool plugin: RRASingle = true: creating only AVERAGE RRAs
Sep 8 16:10:29 OpenWrt user.info sysinit: Could not find plugin processes.
Sep 8 16:10:29 OpenWrt user.info sysinit: Found a configuration for the `processes' plugin, but the plugin isn't loaded or didn't register a configuration callback.
Sep 8 16:10:29 OpenWrt user.info sysinit: Found a configuration for the `processes' plugin, but the plugin isn't loaded or didn't register a configuration callback.
Sep 8 16:10:29 OpenWrt user.info sysinit: Found a configuration for the `processes' plugin, but the plugin isn't loaded or didn't register a configuration callback.
Sep 8 16:10:29 OpenWrt user.info sysinit: Could not find plugin olsrd.
Sep 8 16:10:29 OpenWrt user.info sysinit: Found a configuration for the `olsrd' plugin, but the plugin isn't loaded or didn't register a configuration callback.
Sep 8 16:10:29 OpenWrt user.info sysinit: Found a configuration for the `olsrd' plugin, but the plugin isn't loaded or didn't register a configuration callback.
Sep 8 16:10:29 OpenWrt user.info sysinit: Could not find plugin memory.
Sep 8 16:10:29 OpenWrt user.info sysinit: Could not find plugin cpu.
Sep 8 16:10:30 OpenWrt daemon.notice vnstatd[1180]: vnStat daemon 1.11 started.
Sep 8 16:10:30 OpenWrt daemon.notice vnstatd[1180]: Monitoring: br-lan eth0.1
root@OpenWrt:/# ifconroot@OpenWrt:/# ifconfig
br-lan Link encap:Ethernet HWaddr C0:3F:0E:C3:60:70
inet addr:192.168.1.150 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::c23f:eff:fec3:6070/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:9 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:1090 (1.0 KiB)
eth0 Link encap:Ethernet HWaddr C0:3F:0E:C3:60:70
inet6 addr: fe80::c23f:eff:fec3:6070/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:4
eth0.0 Link encap:Ethernet HWaddr C0:3F:0E:C3:60:70
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:9 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:1090 (1.0 KiB)
eth0.1 Link encap:Ethernet HWaddr C0:3F:0E:C3:60:70
inet6 addr: fe80::c23f:eff:fec3:6070/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:18 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:4618 (4.5 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:96 errors:0 dropped:0 overruns:0 frame:0
TX packets:96 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:6528 (6.3 KiB) TX bytes:6528 (6.3 KiB)
root@OpenWrt:/#
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment