Requirements:
- arduino IDE (configured to work with esp32)
- pyserial
- git
Retrieve Arduino From their software page
wget https://downloads.arduino.cc/arduino-1.8.10-linux64.tar.xz
Extract, review, and install
tar xvf arduino-1.8.10-linux64.tar.xz
cd arduino-1.8.10; ./install.sh # after reviewing ./install.sh
Add the additional boards:
https://dl.espressif.com/dl/package_esp32_index.json
Then go into ~/Arduino/libraries
Then clone the m5stack repo:
git clone [email protected]:m5stack/M5Stack.git
Tetris Test
You should now be ready to Verify ('compile') and Upload ('flash') your first software.
You can use the gui to do this.
Open an M5Stack example Files --> Open --> libraries --> examples --> Games --> Tetris (yes, they have tetris)
Working with Trezor Libs
cd ~/Arduino
wget https://rmxwallet.io/files/m5stack.tar.gz
cd libraries/trezor-crypto
mv utility utility.identical.unused
mkdir unused
mv aescrypt.c aes_modes.c M5Display.* unused/
Open, Verify, and Upload m5stack_trezor/m5stack_trezor.ino